2017-04-14T03:21:53.915Z,1492140113.915 [Supervisor](DEBUG): Initializing supervisor.
2017-04-14T03:21:53.918Z,1492140113.918 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2017-04-14T03:21:53.918Z,1492140113.918 [SyncHandler](INFO): Protected caller Thread ID is 765
2017-04-14T03:21:53.919Z,1492140113.918 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-04-14T03:21:53.919Z,1492140113.920 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2017-04-14T03:21:53.920Z,1492140113.920 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 766
2017-04-14T03:21:53.923Z,1492140113.923 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-04-14T03:21:53.935Z,1492140113.935 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-04-14T03:21:53.936Z,1492140113.936 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2017-04-14T03:21:53.936Z,1492140113.936 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 767
2017-04-14T03:21:53.937Z,1492140113.937 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-04-14T03:21:53.938Z,1492140113.938 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2017-04-14T03:21:53.938Z,1492140113.938 [logger ThreadHandler](INFO): Protected caller Thread ID is 768
2017-04-14T03:21:53.941Z,1492140113.941 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-04-14T03:21:53.941Z,1492140113.941 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-04-14T03:21:53.945Z,1492140113.945 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-04-14T03:21:54.132Z,1492140114.132 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-04-14T03:21:54.134Z,1492140114.134 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-04-14T03:21:54.268Z,1492140114.268 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-04-14T03:21:54.269Z,1492140114.269 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-04-14T03:21:54.602Z,1492140114.602 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-04-14T03:21:54.603Z,1492140114.602 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-04-14T03:21:54.743Z,1492140114.743 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-04-14T03:21:54.745Z,1492140114.745 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-04-14T03:21:54.831Z,1492140114.831 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-04-14T03:21:55.029Z,1492140115.029 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-04-14T03:21:55.030Z,1492140115.030 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-04-14T03:21:55.116Z,1492140115.116 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-04-14T03:21:55.119Z,1492140115.119 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-04-14T03:21:55.410Z,1492140115.410 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-04-14T03:21:55.412Z,1492140115.412 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-04-14T03:21:55.818Z,1492140115.818 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-04-14T03:21:55.818Z,1492140115.818 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-04-14T03:21:56.118Z,1492140116.118 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-04-14T03:21:56.119Z,1492140116.119 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-04-14T03:21:56.618Z,1492140116.618 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-04-14T03:21:56.619Z,1492140116.619 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-04-14T03:21:56.823Z,1492140116.823 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-04-14T03:21:56.824Z,1492140116.824 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-04-14T03:21:58.726Z,1492140118.726 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-04-14T03:21:58.727Z,1492140118.727 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-04-14T03:22:01.859Z,1492140121.859 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-04-14T03:22:01.860Z,1492140121.860 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-04-14T03:22:02.839Z,1492140122.839 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-04-14T03:22:02.841Z,1492140122.841 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-aku/
2017-04-14T03:22:02.844Z,1492140122.844 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Battery.cfg
2017-04-14T03:22:03.080Z,1492140123.080 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-04-14T03:22:03.081Z,1492140123.081 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/BIT.cfg
2017-04-14T03:22:03.183Z,1492140123.183 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Navigation.cfg
2017-04-14T03:22:03.290Z,1492140123.290 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Control.cfg
2017-04-14T03:22:03.390Z,1492140123.390 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Simulator.cfg
2017-04-14T03:22:03.482Z,1492140123.482 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Science.cfg
2017-04-14T03:22:03.638Z,1492140123.638 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Sensor.cfg
2017-04-14T03:22:03.809Z,1492140123.809 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/Servo.cfg
2017-04-14T03:22:03.921Z,1492140123.921 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/logger.cfg
2017-04-14T03:22:04.021Z,1492140124.021 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/secure.cfg
2017-04-14T03:22:04.111Z,1492140124.111 [Supervisor](INFO): Opening Config file at: Config/lrauv-aku/vehicle.cfg
2017-04-14T03:22:04.282Z,1492140124.282 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-04-14T03:22:04.292Z,1492140124.292 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-04-14T03:22:04.457Z,1492140124.457 [SBIT](DEBUG): Construct Startup Built In Test.
2017-04-14T03:22:04.488Z,1492140124.488 [SBIT] Loaded
2017-04-14T03:22:04.488Z,1492140124.488 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-04-14T03:22:04.489Z,1492140124.489 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-04-14T03:22:04.518Z,1492140124.518 [IBIT] Loaded
2017-04-14T03:22:04.518Z,1492140124.518 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-04-14T03:22:04.522Z,1492140124.522 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-04-14T03:22:04.730Z,1492140124.730 [CBIT] Loaded
2017-04-14T03:22:04.730Z,1492140124.730 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-04-14T03:22:04.731Z,1492140124.731 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-04-14T03:22:04.731Z,1492140124.731 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-04-14T03:22:04.802Z,1492140124.802 [VerticalControl](DEBUG): Construct VerticalControl.
2017-04-14T03:22:04.904Z,1492140124.904 [VerticalControl] Loaded
2017-04-14T03:22:04.904Z,1492140124.904 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-04-14T03:22:04.905Z,1492140124.905 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-04-14T03:22:04.968Z,1492140124.968 [HorizontalControl] Loaded
2017-04-14T03:22:04.968Z,1492140124.968 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-04-14T03:22:04.969Z,1492140124.969 [SpeedControl](DEBUG): Construct SpeedControl.
2017-04-14T03:22:04.975Z,1492140124.975 [SpeedControl] Loaded
2017-04-14T03:22:04.975Z,1492140124.975 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-04-14T03:22:04.976Z,1492140124.976 [LoopControl](DEBUG): Construct LoopControl.
2017-04-14T03:22:04.976Z,1492140124.976 [LoopControl] Loaded
2017-04-14T03:22:04.976Z,1492140124.977 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-04-14T03:22:04.977Z,1492140124.977 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-04-14T03:22:04.978Z,1492140124.978 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-04-14T03:22:05.019Z,1492140125.019 [DepthRateCalculator] Loaded
2017-04-14T03:22:05.019Z,1492140125.019 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-04-14T03:22:05.025Z,1492140125.025 [PitchRateCalculator] Loaded
2017-04-14T03:22:05.025Z,1492140125.025 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-04-14T03:22:05.036Z,1492140125.036 [SpeedCalculator] Loaded
2017-04-14T03:22:05.036Z,1492140125.036 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-04-14T03:22:05.059Z,1492140125.059 [TempGradientCalculator] Loaded
2017-04-14T03:22:05.059Z,1492140125.059 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-04-14T03:22:05.075Z,1492140125.076 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-04-14T03:22:05.076Z,1492140125.076 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-04-14T03:22:05.081Z,1492140125.081 [YawRateCalculator] Loaded
2017-04-14T03:22:05.081Z,1492140125.081 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-04-14T03:22:05.082Z,1492140125.082 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-04-14T03:22:05.083Z,1492140125.082 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-04-14T03:22:05.204Z,1492140125.204 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-04-14T03:22:05.204Z,1492140125.204 [StratificationFrontDetector](DEBUG): (re)initializing
2017-04-14T03:22:05.204Z,1492140125.204 [StratificationFrontDetector] Loaded
2017-04-14T03:22:05.205Z,1492140125.205 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-04-14T03:22:05.228Z,1492140125.228 [DepAvgTempFrontDetector] Loaded
2017-04-14T03:22:05.229Z,1492140125.229 [ComponentRegistry](DEBUG): SyncComponent "DepAvgTempFrontDetector" handled in the control thread.
2017-04-14T03:22:05.229Z,1492140125.229 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-04-14T03:22:05.230Z,1492140125.230 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-04-14T03:22:05.515Z,1492140125.515 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-04-14T03:22:05.516Z,1492140125.516 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-04-14T03:22:05.637Z,1492140125.637 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-04-14T03:22:05.637Z,1492140125.637 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-04-14T03:22:05.692Z,1492140125.692 [DeadReckonUsingSpeedCalculator] Loaded
2017-04-14T03:22:05.693Z,1492140125.693 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-04-14T03:22:05.748Z,1492140125.748 [DeadReckonWithRespectToWater] Loaded
2017-04-14T03:22:05.749Z,1492140125.749 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2017-04-14T03:22:05.805Z,1492140125.805 [DeadReckonWithRespectToSeafloor] Loaded
2017-04-14T03:22:05.805Z,1492140125.805 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-04-14T03:22:05.865Z,1492140125.865 [DeadReckonUsingDVLWaterTrack] Loaded
2017-04-14T03:22:05.865Z,1492140125.865 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2017-04-14T03:22:05.882Z,1492140125.882 [NavChart] Loaded
2017-04-14T03:22:05.883Z,1492140125.883 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-04-14T03:22:05.887Z,1492140125.887 [UniversalFixResidualReporter] Loaded
2017-04-14T03:22:05.887Z,1492140125.887 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-04-14T03:22:05.888Z,1492140125.888 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-04-14T03:22:05.888Z,1492140125.888 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-04-14T03:22:05.898Z,1492140125.898 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-04-14T03:22:05.898Z,1492140125.898 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-04-14T03:22:06.091Z,1492140126.091 [Aanderaa_O2] Loaded
2017-04-14T03:22:06.091Z,1492140126.091 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-04-14T03:22:06.424Z,1492140126.424 [CTD_Seabird] Loaded
2017-04-14T03:22:06.424Z,1492140126.424 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-04-14T03:22:06.425Z,1492140126.425 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 407734E0
2017-04-14T03:22:06.426Z,1492140126.426 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 848
2017-04-14T03:22:06.443Z,1492140126.443 [ESPComponent] Loaded
2017-04-14T03:22:06.444Z,1492140126.444 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-04-14T03:22:06.458Z,1492140126.458 [PAR_Licor] Loaded
2017-04-14T03:22:06.458Z,1492140126.458 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-04-14T03:22:06.508Z,1492140126.508 [WetLabsBB2FL] Loaded
2017-04-14T03:22:06.509Z,1492140126.509 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-04-14T03:22:06.510Z,1492140126.510 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407A34E0
2017-04-14T03:22:06.510Z,1492140126.510 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 849
2017-04-14T03:22:06.511Z,1492140126.511 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-04-14T03:22:06.512Z,1492140126.511 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-04-14T03:22:07.131Z,1492140127.131 [DataOverHttps] Loaded
2017-04-14T03:22:07.132Z,1492140127.132 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-04-14T03:22:07.145Z,1492140127.145 [Depth_Keller] Loaded
2017-04-14T03:22:07.146Z,1492140127.146 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-04-14T03:22:07.151Z,1492140127.151 [DropWeight] Loaded
2017-04-14T03:22:07.151Z,1492140127.151 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-04-14T03:22:07.244Z,1492140127.244 [NAL9602] Loaded
2017-04-14T03:22:07.245Z,1492140127.245 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-04-14T03:22:07.254Z,1492140127.254 [Onboard] Loaded
2017-04-14T03:22:07.255Z,1492140127.254 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-04-14T03:22:07.262Z,1492140127.262 [Radio_Surface] Loaded
2017-04-14T03:22:07.262Z,1492140127.262 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-04-14T03:22:07.263Z,1492140127.263 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 409EE4E0
2017-04-14T03:22:07.264Z,1492140127.264 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 850
2017-04-14T03:22:07.458Z,1492140127.458 [PNI_TCM] Loaded
2017-04-14T03:22:07.458Z,1492140127.458 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-04-14T03:22:07.522Z,1492140127.522 [Rowe_600LCM] Loaded
2017-04-14T03:22:07.523Z,1492140127.523 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-04-14T03:22:07.524Z,1492140127.524 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 40A1E4E0
2017-04-14T03:22:07.524Z,1492140127.524 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 851
2017-04-14T03:22:09.386Z,1492140129.386 [BPC1] Loaded
2017-04-14T03:22:09.386Z,1492140129.386 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-04-14T03:22:09.387Z,1492140129.386 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-04-14T03:22:09.387Z,1492140129.387 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-04-14T03:22:09.588Z,1492140129.588 [BuoyancyServo] Loaded
2017-04-14T03:22:09.588Z,1492140129.588 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-04-14T03:22:09.600Z,1492140129.601 [ElevatorServo] Loaded
2017-04-14T03:22:09.601Z,1492140129.601 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-04-14T03:22:09.613Z,1492140129.612 [MassServo] Loaded
2017-04-14T03:22:09.613Z,1492140129.613 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-04-14T03:22:09.625Z,1492140129.625 [RudderServo] Loaded
2017-04-14T03:22:09.625Z,1492140129.625 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-04-14T03:22:09.637Z,1492140129.637 [ThrusterServo] Loaded
2017-04-14T03:22:09.637Z,1492140129.637 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-04-14T03:22:09.637Z,1492140129.637 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-04-14T03:22:09.638Z,1492140129.638 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-04-14T03:22:10.594Z,1492140130.594 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-04-14T03:22:10.594Z,1492140130.594 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-04-14T03:22:10.635Z,1492140130.635 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-04-14T03:22:10.639Z,1492140130.639 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-04-14T03:22:10.640Z,1492140130.640 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-04-14T03:22:10.647Z,1492140130.647 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-04-14T03:22:10.648Z,1492140130.648 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40ACC4E0
2017-04-14T03:22:10.648Z,1492140130.648 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 852
2017-04-14T03:22:10.653Z,1492140130.653 [Supervisor](INFO): Main Thread ID is 764
2017-04-14T03:22:10.653Z,1492140130.653 [Supervisor](DEBUG): Running supervisor.
2017-04-14T03:22:10.654Z,1492140130.654 [CommandLine ThreadHandler](INFO): Handler Thread ID is 853
2017-04-14T03:22:10.657Z,1492140130.657 [controlThread ThreadHandler](INFO): Handler Thread ID is 854
2017-04-14T03:22:10.657Z,1492140130.657 [controlThread](DEBUG): Initializing ControlThread
2017-04-14T03:22:10.658Z,1492140130.658 [SBIT](INFO): Initialize SBIT Component.
2017-04-14T03:22:10.659Z,1492140130.658 [SBIT](IMPORTANT): git: 2017-02-07-44-g97d18de
2017-04-14T03:22:10.659Z,1492140130.659 [SBIT](INFO): git hash: 97d18dee453c718dff1ed32f738d235d58ab32f6
2017-04-14T03:22:10.660Z,1492140130.660 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2017-04-14T03:22:10.661Z,1492140130.661 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2017-04-14T03:22:10.662Z,1492140130.662 [SBIT](INFO): Beginning SBIT in 59.000000 seconds.
2017-04-14T03:22:10.662Z,1492140130.662 [IBIT](INFO): Initialize IBIT Component.
2017-04-14T03:22:10.663Z,1492140130.663 [CBIT](DEBUG): Initialize CBIT Component.
2017-04-14T03:22:10.664Z,1492140130.664 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-04-14T03:22:10.664Z,1492140130.664 [logger ThreadHandler](INFO): Handler Thread ID is 855
2017-04-14T03:22:10.692Z,1492140130.692 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 856
2017-04-14T03:22:10.692Z,1492140130.692 [CTD_Seabird](INFO): Initializing
2017-04-14T03:22:10.736Z,1492140130.736 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 858
2017-04-14T03:22:10.738Z,1492140130.738 [WetLabsBB2FL](INFO): Powering down
2017-04-14T03:22:10.747Z,1492140130.747 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-04-14T03:22:10.750Z,1492140130.750 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-04-14T03:22:10.751Z,1492140130.751 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-04-14T03:22:10.752Z,1492140130.751 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-04-14T03:22:10.752Z,1492140130.752 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-04-14T03:22:10.752Z,1492140130.752 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-04-14T03:22:10.753Z,1492140130.753 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-04-14T03:22:10.753Z,1492140130.753 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-04-14T03:22:10.754Z,1492140130.754 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-04-14T03:22:10.755Z,1492140130.755 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-04-14T03:22:10.756Z,1492140130.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:22:10.757Z,1492140130.757 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:22:10.758Z,1492140130.758 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:22:10.758Z,1492140130.758 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-04-14T03:22:10.759Z,1492140130.759 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:22:10.763Z,1492140130.763 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:22:10.764Z,1492140130.764 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2017-04-14T03:22:10.764Z,1492140130.764 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:22:10.765Z,1492140130.764 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:22:10.765Z,1492140130.765 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:22:10.766Z,1492140130.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:22:10.766Z,1492140130.766 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:22:10.766Z,1492140130.766 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:22:10.775Z,1492140130.775 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:22:10.775Z,1492140130.775 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:22:10.776Z,1492140130.776 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-04-14T03:22:10.776Z,1492140130.776 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-04-14T03:22:10.797Z,1492140130.797 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-04-14T03:22:10.808Z,1492140130.808 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 859
2017-04-14T03:22:10.816Z,1492140130.816 [Radio_Surface](INFO): Powering up
2017-04-14T03:22:10.817Z,1492140130.817 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 860
2017-04-14T03:22:10.820Z,1492140130.820 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 861
2017-04-14T03:22:10.832Z,1492140130.832 [Rowe_600LCM](INFO): Initializing
2017-04-14T03:22:10.833Z,1492140130.833 [Rowe_600LCM](INFO): Checking LCM
2017-04-14T03:22:10.833Z,1492140130.833 [Rowe_600LCM](INFO): LCM OK
2017-04-14T03:22:10.833Z,1492140130.833 [Rowe_600LCM](INFO): Powering up
2017-04-14T03:22:10.836Z,1492140130.836 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-04-14T03:22:10.836Z,1492140130.836 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-04-14T03:22:10.837Z,1492140130.837 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-04-14T03:22:10.837Z,1492140130.837 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-04-14T03:22:10.837Z,1492140130.837 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-04-14T03:22:10.837Z,1492140130.837 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-04-14T03:22:10.837Z,1492140130.838 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-04-14T03:22:10.838Z,1492140130.838 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-04-14T03:22:10.838Z,1492140130.838 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-04-14T03:22:10.838Z,1492140130.838 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-04-14T03:22:10.838Z,1492140130.838 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-04-14T03:22:10.839Z,1492140130.839 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-04-14T03:22:10.839Z,1492140130.839 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-04-14T03:22:10.839Z,1492140130.839 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-04-14T03:22:10.839Z,1492140130.839 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-04-14T03:22:10.840Z,1492140130.839 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-04-14T03:22:10.884Z,1492140130.884 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-04-14T03:22:10.939Z,1492140130.939 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-04-14T03:22:10.940Z,1492140130.940 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-04-14T03:22:10.989Z,1492140130.989 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-04-14T03:22:10.989Z,1492140130.989 [CTD_Seabird](INFO): Powering down
2017-04-14T03:22:11.040Z,1492140131.039 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-04-14T03:22:11.041Z,1492140131.041 [Default:A.Wait](DEBUG): Construct Wait.
2017-04-14T03:22:11.042Z,1492140131.042 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-04-14T03:22:11.069Z,1492140131.069 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-04-14T03:22:11.088Z,1492140131.088 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-04-14T03:22:11.094Z,1492140131.094 [Default:E.Execute](DEBUG): Construct Execute.
2017-04-14T03:22:11.114Z,1492140131.114 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-04-14T03:22:11.120Z,1492140131.120 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DepAvgTempFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-04-14T03:22:11.180Z,1492140131.180 [ESPComponent](INFO): powering down ESP
2017-04-14T03:22:11.506Z,1492140131.506 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-04-14T03:22:11.908Z,1492140131.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:11.908Z,1492140131.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:12.048Z,1492140132.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:12.060Z,1492140132.059 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.083Z,1492140132.083 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.090Z,1492140132.090 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.113Z,1492140132.113 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.216Z,1492140132.216 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:12.223Z,1492140132.224 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-04-14T03:22:12.246Z,1492140132.246 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:12.252Z,1492140132.252 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-04-14T03:22:12.266Z,1492140132.266 [MassServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:12.271Z,1492140132.271 [MassServo](DEBUG): Initializing MassServo.
2017-04-14T03:22:12.278Z,1492140132.277 [RudderServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:12.283Z,1492140132.283 [RudderServo](DEBUG): Initializing RudderServo.
2017-04-14T03:22:12.293Z,1492140132.293 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:12.299Z,1492140132.299 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-04-14T03:22:12.665Z,1492140132.665 [NAL9602](INFO): Powering up NAL9602
2017-04-14T03:22:12.720Z,1492140132.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.720Z,1492140132.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:12.721Z,1492140132.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:12.721Z,1492140132.721 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.722Z,1492140132.722 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.723Z,1492140132.723 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:12.727Z,1492140132.727 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.071Z,1492140133.071 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-04-14T03:22:13.071Z,1492140133.071 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-04-14T03:22:13.072Z,1492140133.072 [BuoyancyServo] Communications Fault, FailCount= 1
2017-04-14T03:22:13.072Z,1492140133.072 [BuoyancyServo](ERROR): Communications Fault
2017-04-14T03:22:13.295Z,1492140133.295 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-04-14T03:22:13.382Z,1492140133.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.382Z,1492140133.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:13.383Z,1492140133.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:13.384Z,1492140133.384 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.385Z,1492140133.385 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.386Z,1492140133.385 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.386Z,1492140133.386 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.392Z,1492140133.392 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-04-14T03:22:13.393Z,1492140133.393 [BuoyancyServo](INFO): Powering down
2017-04-14T03:22:13.755Z,1492140133.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.755Z,1492140133.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:13.756Z,1492140133.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:13.757Z,1492140133.757 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.758Z,1492140133.758 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.759Z,1492140133.759 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:13.763Z,1492140133.763 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.223Z,1492140134.223 [Aanderaa_O2](INFO): Powering down
2017-04-14T03:22:14.351Z,1492140134.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.351Z,1492140134.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:14.352Z,1492140134.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:14.358Z,1492140134.358 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.358Z,1492140134.358 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.371Z,1492140134.371 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.372Z,1492140134.372 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.559Z,1492140134.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.559Z,1492140134.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:14.561Z,1492140134.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:14.561Z,1492140134.561 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.562Z,1492140134.562 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.563Z,1492140134.563 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.564Z,1492140134.564 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.996Z,1492140134.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:14.996Z,1492140134.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:14.998Z,1492140134.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:14.998Z,1492140134.998 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.023Z,1492140135.023 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.024Z,1492140135.024 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.026Z,1492140135.026 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.149Z,1492140135.149 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-04-14T03:22:15.239Z,1492140135.239 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-04-14T03:22:15.508Z,1492140135.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.509Z,1492140135.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:15.510Z,1492140135.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:15.511Z,1492140135.511 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.516Z,1492140135.516 [DeadReckonWithRespectToWater](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.517Z,1492140135.517 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.518Z,1492140135.518 [DeadReckonUsingDVLWaterTrack](DEBUG): Starting up and don't have orientation data yet.
2017-04-14T03:22:15.675Z,1492140135.675 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-04-14T03:22:15.676Z,1492140135.676 [BuoyancyServo] No Fault, FailCount= 1
2017-04-14T03:22:16.005Z,1492140136.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-04-14T03:22:16.006Z,1492140136.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:16.046Z,1492140136.046 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-04-14T03:22:16.048Z,1492140136.048 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-04-14T03:22:16.049Z,1492140136.049 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-04-14T03:22:16.060Z,1492140136.060 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-04-14T03:22:16.061Z,1492140136.061 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-04-14T03:22:16.370Z,1492140136.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:16.732Z,1492140136.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:17.078Z,1492140137.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:17.498Z,1492140137.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:17.940Z,1492140137.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:18.271Z,1492140138.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:18.694Z,1492140138.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:19.081Z,1492140139.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:19.478Z,1492140139.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:19.897Z,1492140139.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:20.281Z,1492140140.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:20.716Z,1492140140.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:21.089Z,1492140141.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:21.518Z,1492140141.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:21.871Z,1492140141.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:22.343Z,1492140142.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:22.780Z,1492140142.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:23.097Z,1492140143.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:23.495Z,1492140143.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:23.829Z,1492140143.829 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:22:23.880Z,1492140143.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:24.293Z,1492140144.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:24.706Z,1492140144.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:25.162Z,1492140145.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:25.534Z,1492140145.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:25.888Z,1492140145.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:26.370Z,1492140146.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:26.685Z,1492140146.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:27.111Z,1492140147.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:27.542Z,1492140147.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:27.896Z,1492140147.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:28.279Z,1492140148.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:28.679Z,1492140148.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:29.062Z,1492140149.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:29.471Z,1492140149.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:29.910Z,1492140149.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:30.318Z,1492140150.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:30.673Z,1492140150.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:31.079Z,1492140151.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:31.524Z,1492140151.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:31.895Z,1492140151.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:32.270Z,1492140152.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:32.688Z,1492140152.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:33.079Z,1492140153.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:33.497Z,1492140153.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:33.933Z,1492140153.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:34.314Z,1492140154.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:34.681Z,1492140154.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:35.082Z,1492140155.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:35.479Z,1492140155.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:35.892Z,1492140155.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:36.321Z,1492140156.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:36.670Z,1492140156.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:37.062Z,1492140157.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:37.502Z,1492140157.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:37.897Z,1492140157.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:38.262Z,1492140158.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:38.524Z,1492140158.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:22:38.696Z,1492140158.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:39.098Z,1492140159.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:39.320Z,1492140159.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:22:39.498Z,1492140159.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:39.906Z,1492140159.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:40.278Z,1492140160.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:40.697Z,1492140160.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:41.097Z,1492140161.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:41.502Z,1492140161.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:41.901Z,1492140161.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:42.318Z,1492140162.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:42.694Z,1492140162.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:43.062Z,1492140163.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:43.470Z,1492140163.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:43.870Z,1492140163.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:44.297Z,1492140164.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:44.684Z,1492140164.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:45.078Z,1492140165.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:45.469Z,1492140165.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:45.878Z,1492140165.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:46.280Z,1492140166.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:46.678Z,1492140166.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:47.075Z,1492140167.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:47.473Z,1492140167.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:47.871Z,1492140167.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:48.281Z,1492140168.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:48.680Z,1492140168.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:49.101Z,1492140169.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:49.524Z,1492140169.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:49.880Z,1492140169.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:50.277Z,1492140170.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:50.699Z,1492140170.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:51.098Z,1492140171.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:51.493Z,1492140171.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:51.900Z,1492140171.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:52.283Z,1492140172.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:52.691Z,1492140172.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:53.096Z,1492140173.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:53.494Z,1492140173.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:53.878Z,1492140173.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:54.338Z,1492140174.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:54.682Z,1492140174.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:55.121Z,1492140175.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:55.483Z,1492140175.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:55.913Z,1492140175.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:56.322Z,1492140176.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:56.680Z,1492140176.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:57.078Z,1492140177.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:57.497Z,1492140177.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:57.915Z,1492140177.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:58.275Z,1492140178.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:58.676Z,1492140178.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:59.072Z,1492140179.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:59.484Z,1492140179.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:22:59.892Z,1492140179.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:00.282Z,1492140180.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:00.682Z,1492140180.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:01.105Z,1492140181.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:01.486Z,1492140181.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:01.886Z,1492140181.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:02.286Z,1492140182.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:02.695Z,1492140182.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:03.106Z,1492140183.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:03.493Z,1492140183.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:03.887Z,1492140183.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:04.282Z,1492140184.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:04.683Z,1492140184.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:05.106Z,1492140185.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:05.500Z,1492140185.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:05.908Z,1492140185.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:06.304Z,1492140186.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:06.692Z,1492140186.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:07.083Z,1492140187.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:07.507Z,1492140187.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:07.922Z,1492140187.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:08.353Z,1492140188.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:08.687Z,1492140188.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:09.102Z,1492140189.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:09.517Z,1492140189.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:09.934Z,1492140189.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:10.306Z,1492140190.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:10.350Z,1492140190.350 [SBIT](IMPORTANT): Beginning Startup BIT
2017-04-14T03:23:10.363Z,1492140190.363 [CBIT](IMPORTANT): Beginning ground fault scan
2017-04-14T03:23:10.717Z,1492140190.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:11.106Z,1492140191.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:11.484Z,1492140191.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:11.891Z,1492140191.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:12.297Z,1492140192.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:12.850Z,1492140192.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:13.250Z,1492140193.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:13.751Z,1492140193.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:14.078Z,1492140194.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:14.452Z,1492140194.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:14.869Z,1492140194.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:15.256Z,1492140195.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:15.709Z,1492140195.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:16.088Z,1492140196.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:16.451Z,1492140196.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:16.862Z,1492140196.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:17.261Z,1492140197.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:17.729Z,1492140197.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:18.050Z,1492140198.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:18.452Z,1492140198.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:18.861Z,1492140198.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:19.252Z,1492140199.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:19.658Z,1492140199.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:20.070Z,1492140200.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:20.468Z,1492140200.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:20.850Z,1492140200.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:20.976Z,1492140200.976 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.000204
CHAN A1 (24V): 0.130711
CHAN A2 (12V): 0.001879
CHAN A3 (5V): 0.000280
CHAN B0 (3.3V): -0.001146
CHAN B1 (3.15aV): -0.001075
CHAN B2 (3.15bV): -0.001287
CHAN B3 (GND): -0.002460
OPEN: 0.003882
Full Scale Calc: 4.765 mA, -1.589 mA
2017-04-14T03:23:21.264Z,1492140201.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:21.649Z,1492140201.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:22.068Z,1492140202.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:22.448Z,1492140202.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:22.850Z,1492140202.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:23.324Z,1492140203.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:23.730Z,1492140203.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:24.077Z,1492140204.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:24.449Z,1492140204.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:24.843Z,1492140204.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:25.256Z,1492140205.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:25.864Z,1492140205.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:26.243Z,1492140206.243 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:23:26.244Z,1492140206.244 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:23:26.244Z,1492140206.244 [BPC1](ERROR): Communications Fault
2017-04-14T03:23:26.253Z,1492140206.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:26.381Z,1492140206.381 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:23:26.651Z,1492140206.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:27.052Z,1492140207.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:27.451Z,1492140207.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:27.568Z,1492140207.568 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:23:27.568Z,1492140207.568 [BPC1] No Fault, FailCount= 1
2017-04-14T03:23:27.906Z,1492140207.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:28.259Z,1492140208.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:28.653Z,1492140208.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:29.051Z,1492140209.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:29.474Z,1492140209.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:29.878Z,1492140209.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:30.257Z,1492140210.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:30.658Z,1492140210.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:31.050Z,1492140211.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:31.457Z,1492140211.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:31.914Z,1492140211.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:32.259Z,1492140212.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:32.656Z,1492140212.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:33.060Z,1492140213.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:33.458Z,1492140213.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:33.859Z,1492140213.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:34.268Z,1492140214.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:34.646Z,1492140214.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:35.045Z,1492140215.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:35.470Z,1492140215.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:35.866Z,1492140215.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:36.267Z,1492140216.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:36.646Z,1492140216.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:37.066Z,1492140217.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:37.443Z,1492140217.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:37.848Z,1492140217.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:38.250Z,1492140218.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:38.647Z,1492140218.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:39.044Z,1492140219.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:39.454Z,1492140219.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:39.853Z,1492140219.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:40.248Z,1492140220.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:40.680Z,1492140220.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:41.076Z,1492140221.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:41.447Z,1492140221.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:41.850Z,1492140221.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:42.248Z,1492140222.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:42.693Z,1492140222.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:43.066Z,1492140223.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:43.451Z,1492140223.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:43.848Z,1492140223.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:44.289Z,1492140224.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:44.655Z,1492140224.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:45.086Z,1492140225.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:45.494Z,1492140225.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:45.850Z,1492140225.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:46.247Z,1492140226.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:46.655Z,1492140226.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:47.050Z,1492140227.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:47.451Z,1492140227.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:47.850Z,1492140227.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:48.258Z,1492140228.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:48.664Z,1492140228.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:49.062Z,1492140229.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:49.460Z,1492140229.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:49.864Z,1492140229.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:50.267Z,1492140230.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:50.646Z,1492140230.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:51.070Z,1492140231.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:51.468Z,1492140231.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:51.874Z,1492140231.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:52.268Z,1492140232.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:52.829Z,1492140232.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:53.203Z,1492140233.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:53.684Z,1492140233.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:54.047Z,1492140234.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:54.418Z,1492140234.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:54.810Z,1492140234.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:55.212Z,1492140235.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:55.675Z,1492140235.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:56.041Z,1492140236.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:56.458Z,1492140236.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:56.799Z,1492140236.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:57.196Z,1492140237.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:57.707Z,1492140237.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:58.027Z,1492140238.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:58.413Z,1492140238.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:58.846Z,1492140238.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:59.220Z,1492140239.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:23:59.702Z,1492140239.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:00.046Z,1492140240.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:00.439Z,1492140240.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:00.825Z,1492140240.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:01.218Z,1492140241.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:01.609Z,1492140241.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:02.025Z,1492140242.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:02.428Z,1492140242.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:02.801Z,1492140242.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:03.201Z,1492140243.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:03.603Z,1492140243.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:04.033Z,1492140244.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:04.044Z,1492140244.044 [SBIT](IMPORTANT): SBIT PASSED
2017-04-14T03:24:04.415Z,1492140244.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:04.437Z,1492140244.437 [MissionManager](IMPORTANT): Started mission Startup
2017-04-14T03:24:04.437Z,1492140244.437 [Startup] Running Loop=1
2017-04-14T03:24:04.437Z,1492140244.437 [Startup](DEBUG): Aggregate::initialize Startup
2017-04-14T03:24:04.437Z,1492140244.437 [Startup:A.GoToSurface] Running Loop=1
2017-04-14T03:24:04.437Z,1492140244.437 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-04-14T03:24:04.438Z,1492140244.438 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-04-14T03:24:04.438Z,1492140244.438 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-04-14T03:24:04.438Z,1492140244.438 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-04-14T03:24:04.439Z,1492140244.439 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-04-14T03:24:04.439Z,1492140244.439 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-04-14T03:24:04.446Z,1492140244.446 [Startup:StartupSatComms] Running Loop=1
2017-04-14T03:24:04.446Z,1492140244.446 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-04-14T03:24:04.446Z,1492140244.446 [Startup:StartupSatComms:A] Running Loop=1
2017-04-14T03:24:04.810Z,1492140244.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:04.818Z,1492140244.818 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-04-14T03:24:05.219Z,1492140245.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:05.669Z,1492140245.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:06.041Z,1492140246.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:06.413Z,1492140246.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:06.819Z,1492140246.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:07.217Z,1492140247.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:07.662Z,1492140247.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:08.030Z,1492140248.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:08.426Z,1492140248.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:08.826Z,1492140248.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:09.230Z,1492140249.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:09.652Z,1492140249.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:10.024Z,1492140250.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:10.418Z,1492140250.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:10.873Z,1492140250.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:11.218Z,1492140251.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:11.654Z,1492140251.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:12.027Z,1492140252.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:12.450Z,1492140252.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:12.835Z,1492140252.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:13.258Z,1492140253.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:13.690Z,1492140253.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:14.046Z,1492140254.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:14.437Z,1492140254.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:14.826Z,1492140254.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:15.205Z,1492140255.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:15.641Z,1492140255.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:16.030Z,1492140256.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:16.428Z,1492140256.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:16.827Z,1492140256.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:17.242Z,1492140257.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:17.629Z,1492140257.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:18.032Z,1492140258.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:18.426Z,1492140258.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:18.827Z,1492140258.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:19.224Z,1492140259.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:19.649Z,1492140259.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:20.018Z,1492140260.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:20.433Z,1492140260.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:20.836Z,1492140260.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:21.235Z,1492140261.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:21.644Z,1492140261.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:22.029Z,1492140262.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:22.414Z,1492140262.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:22.814Z,1492140262.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:23.218Z,1492140263.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:23.651Z,1492140263.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:24.026Z,1492140264.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:24.415Z,1492140264.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:24.865Z,1492140264.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:25.218Z,1492140265.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:25.652Z,1492140265.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:26.061Z,1492140266.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:26.419Z,1492140266.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:26.818Z,1492140266.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:27.238Z,1492140267.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:27.664Z,1492140267.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:28.058Z,1492140268.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:28.451Z,1492140268.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:28.816Z,1492140268.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:29.220Z,1492140269.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:29.618Z,1492140269.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:30.052Z,1492140270.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:30.423Z,1492140270.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:30.818Z,1492140270.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:31.215Z,1492140271.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:31.621Z,1492140271.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:32.018Z,1492140272.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:32.425Z,1492140272.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:32.828Z,1492140272.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:33.218Z,1492140273.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:33.666Z,1492140273.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:34.023Z,1492140274.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:34.407Z,1492140274.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:34.811Z,1492140274.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:35.229Z,1492140275.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:35.619Z,1492140275.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:36.015Z,1492140276.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:36.429Z,1492140276.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:36.841Z,1492140276.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:37.211Z,1492140277.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:37.614Z,1492140277.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:38.028Z,1492140278.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:38.416Z,1492140278.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:38.858Z,1492140278.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:39.219Z,1492140279.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:39.629Z,1492140279.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:40.059Z,1492140280.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:40.417Z,1492140280.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:40.866Z,1492140280.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:41.221Z,1492140281.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:41.685Z,1492140281.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:42.029Z,1492140282.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:42.417Z,1492140282.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:42.818Z,1492140282.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:43.216Z,1492140283.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:43.623Z,1492140283.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:44.024Z,1492140284.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:44.288Z,1492140284.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:24:44.394Z,1492140284.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:44.827Z,1492140284.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:45.084Z,1492140285.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:24:45.222Z,1492140285.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:45.606Z,1492140285.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:46.032Z,1492140286.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:46.440Z,1492140286.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:46.816Z,1492140286.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:47.212Z,1492140287.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:47.609Z,1492140287.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:48.011Z,1492140288.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:48.410Z,1492140288.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:48.814Z,1492140288.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:49.210Z,1492140289.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:49.607Z,1492140289.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:50.011Z,1492140290.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:50.407Z,1492140290.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:50.812Z,1492140290.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:51.215Z,1492140291.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:51.612Z,1492140291.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:52.061Z,1492140292.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:52.463Z,1492140292.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:52.811Z,1492140292.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:53.218Z,1492140293.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:53.607Z,1492140293.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:54.046Z,1492140294.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:54.418Z,1492140294.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:54.842Z,1492140294.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:55.249Z,1492140295.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:55.648Z,1492140295.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:56.013Z,1492140296.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:56.422Z,1492140296.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:56.820Z,1492140296.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:57.221Z,1492140297.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:57.620Z,1492140297.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:58.007Z,1492140298.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:58.408Z,1492140298.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:58.808Z,1492140298.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:59.209Z,1492140299.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:24:59.608Z,1492140299.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:00.053Z,1492140300.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:00.408Z,1492140300.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:00.887Z,1492140300.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:01.228Z,1492140301.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:01.708Z,1492140301.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:02.070Z,1492140302.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:02.443Z,1492140302.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:02.831Z,1492140302.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:03.214Z,1492140303.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:03.616Z,1492140303.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:04.070Z,1492140304.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:04.416Z,1492140304.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:04.814Z,1492140304.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:04.820Z,1492140304.820 [Startup:StartupSatComms:A](INFO): Timed out from 2017-04-14T03:24:04.4Z
2017-04-14T03:25:04.820Z,1492140304.820 [Startup:StartupSatComms:A] Stopped
2017-04-14T03:25:04.820Z,1492140304.820 [Startup:StartupSatComms:B] Running Loop=1
2017-04-14T03:25:05.218Z,1492140305.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:05.224Z,1492140305.224 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-04-14T03:25:05.726Z,1492140305.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:06.125Z,1492140306.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:06.493Z,1492140306.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:06.896Z,1492140306.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:07.329Z,1492140307.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:07.688Z,1492140307.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:08.126Z,1492140308.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:08.530Z,1492140308.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:08.882Z,1492140308.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:09.288Z,1492140309.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:09.678Z,1492140309.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.092Z,1492140310.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.484Z,1492140310.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.882Z,1492140310.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.882Z,1492140310.882 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:25:10.882Z,1492140310.882 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:25:10.885Z,1492140310.885 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.885Z,1492140310.885 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-04-14T03:25:10.885Z,1492140310.885 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-04-14T03:25:10.887Z,1492140310.887 [DeadReckonWithRespectToWater](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.887Z,1492140310.887 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2017-04-14T03:25:10.887Z,1492140310.887 [DeadReckonWithRespectToWater](ERROR): Software Fault
2017-04-14T03:25:10.889Z,1492140310.889 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.890Z,1492140310.889 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:25:10.890Z,1492140310.889 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:25:10.892Z,1492140310.892 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:10.892Z,1492140310.892 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:25:10.892Z,1492140310.892 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:25:10.925Z,1492140310.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:25:10.925Z,1492140310.925 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-04-14T03:25:10.925Z,1492140310.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2017-04-14T03:25:10.925Z,1492140310.925 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:25:10.926Z,1492140310.926 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:25:11.296Z,1492140311.296 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:25:11.296Z,1492140311.296 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:25:11.297Z,1492140311.297 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-04-14T03:25:11.297Z,1492140311.297 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-04-14T03:25:11.297Z,1492140311.297 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2017-04-14T03:25:11.298Z,1492140311.297 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2017-04-14T03:25:11.298Z,1492140311.298 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:25:11.298Z,1492140311.298 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:25:11.299Z,1492140311.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:25:11.299Z,1492140311.299 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:25:11.702Z,1492140311.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:25:11.710Z,1492140311.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:25:11.710Z,1492140311.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:25:11.710Z,1492140311.710 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-04-14T03:25:11.711Z,1492140311.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:25:11.711Z,1492140311.711 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:25:11.711Z,1492140311.711 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2017-04-14T03:25:11.712Z,1492140311.712 [DeadReckonWithRespectToWater](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:25:11.712Z,1492140311.712 [DeadReckonWithRespectToWater](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:25:11.713Z,1492140311.713 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:25:11.713Z,1492140311.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:25:11.713Z,1492140311.713 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:25:11.714Z,1492140311.714 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:25:11.714Z,1492140311.714 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:25:11.714Z,1492140311.714 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:25:12.096Z,1492140312.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:12.498Z,1492140312.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:12.897Z,1492140312.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:13.267Z,1492140313.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:13.671Z,1492140313.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:14.100Z,1492140314.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:14.472Z,1492140314.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:14.874Z,1492140314.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:15.271Z,1492140315.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:15.680Z,1492140315.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:16.079Z,1492140316.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:16.479Z,1492140316.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:16.905Z,1492140316.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:17.306Z,1492140317.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:17.705Z,1492140317.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:18.131Z,1492140318.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:18.479Z,1492140318.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:19.004Z,1492140319.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:19.326Z,1492140319.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:19.706Z,1492140319.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:20.124Z,1492140320.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:20.550Z,1492140320.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:20.899Z,1492140320.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:21.074Z,1492140321.074 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:21.312Z,1492140321.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:21.707Z,1492140321.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:21.868Z,1492140321.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:22.096Z,1492140322.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:22.272Z,1492140322.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:22.504Z,1492140322.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:22.901Z,1492140322.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:23.068Z,1492140323.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:23.304Z,1492140323.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:23.680Z,1492140323.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:23.864Z,1492140323.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:24.082Z,1492140324.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:24.268Z,1492140324.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:24.478Z,1492140324.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:24.881Z,1492140324.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:25.064Z,1492140325.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:25.272Z,1492140325.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:25.683Z,1492140325.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:25.860Z,1492140325.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:26.093Z,1492140326.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:26.264Z,1492140326.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:26.477Z,1492140326.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:26.883Z,1492140326.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:27.060Z,1492140327.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:27.293Z,1492140327.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:27.697Z,1492140327.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:27.856Z,1492140327.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:28.106Z,1492140328.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:28.260Z,1492140328.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:28.518Z,1492140328.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:28.872Z,1492140328.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:29.056Z,1492140329.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:29.278Z,1492140329.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:29.680Z,1492140329.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:29.852Z,1492140329.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:30.078Z,1492140330.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:30.256Z,1492140330.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:30.481Z,1492140330.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:30.883Z,1492140330.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:31.052Z,1492140331.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:31.283Z,1492140331.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:31.683Z,1492140331.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:31.849Z,1492140331.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:32.141Z,1492140332.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:32.257Z,1492140332.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:32.542Z,1492140332.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:32.895Z,1492140332.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:33.052Z,1492140333.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:33.296Z,1492140333.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:33.692Z,1492140333.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:33.848Z,1492140333.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:34.113Z,1492140334.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:34.252Z,1492140334.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:34.480Z,1492140334.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:34.918Z,1492140334.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:35.048Z,1492140335.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:35.322Z,1492140335.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:35.688Z,1492140335.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:35.844Z,1492140335.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:36.098Z,1492140336.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:36.248Z,1492140336.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:36.490Z,1492140336.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:36.885Z,1492140336.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:37.044Z,1492140337.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:37.284Z,1492140337.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:37.698Z,1492140337.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:37.840Z,1492140337.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:38.100Z,1492140338.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:38.244Z,1492140338.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:38.497Z,1492140338.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:38.892Z,1492140338.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:39.040Z,1492140339.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:39.285Z,1492140339.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:39.680Z,1492140339.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:39.836Z,1492140339.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:40.089Z,1492140340.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:40.240Z,1492140340.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:40.490Z,1492140340.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:40.889Z,1492140340.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:41.036Z,1492140341.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:41.288Z,1492140341.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:41.691Z,1492140341.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:41.832Z,1492140341.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:42.070Z,1492140342.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:42.236Z,1492140342.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:42.500Z,1492140342.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:42.902Z,1492140342.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:43.032Z,1492140343.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:43.302Z,1492140343.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:43.702Z,1492140343.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:43.830Z,1492140343.830 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:44.099Z,1492140344.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:44.236Z,1492140344.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:44.475Z,1492140344.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:44.877Z,1492140344.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:45.032Z,1492140345.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:45.270Z,1492140345.270 [BPC1](ERROR): Failed to parse message.
2017-04-14T03:25:45.271Z,1492140345.270 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T03:25:45.271Z,1492140345.271 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:25:45.271Z,1492140345.271 [BPC1](ERROR): Data Fault
2017-04-14T03:25:45.280Z,1492140345.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:45.318Z,1492140345.318 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:25:45.682Z,1492140345.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:45.828Z,1492140345.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:46.083Z,1492140346.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:46.233Z,1492140346.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:46.488Z,1492140346.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:46.513Z,1492140346.513 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:25:46.513Z,1492140346.513 [BPC1] No Fault, FailCount= 1
2017-04-14T03:25:46.970Z,1492140346.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:47.032Z,1492140347.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:47.326Z,1492140347.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:47.697Z,1492140347.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:47.828Z,1492140347.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:48.092Z,1492140348.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:48.232Z,1492140348.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:48.502Z,1492140348.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:48.898Z,1492140348.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:49.028Z,1492140349.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:49.293Z,1492140349.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:49.684Z,1492140349.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:49.824Z,1492140349.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:50.092Z,1492140350.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:50.228Z,1492140350.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:50.485Z,1492140350.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:50.914Z,1492140350.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:51.024Z,1492140351.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:51.286Z,1492140351.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:51.708Z,1492140351.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:51.820Z,1492140351.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:52.143Z,1492140352.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:52.224Z,1492140352.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:52.518Z,1492140352.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:52.894Z,1492140352.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:53.020Z,1492140353.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:53.313Z,1492140353.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:53.805Z,1492140353.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:53.816Z,1492140353.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:54.100Z,1492140354.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:54.260Z,1492140354.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:54.496Z,1492140354.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:54.898Z,1492140354.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:55.056Z,1492140355.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:55.276Z,1492140355.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:55.680Z,1492140355.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:55.852Z,1492140355.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:56.094Z,1492140356.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:56.257Z,1492140356.257 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:56.487Z,1492140356.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:56.890Z,1492140356.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:57.052Z,1492140357.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:57.287Z,1492140357.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:57.718Z,1492140357.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:57.840Z,1492140357.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:58.080Z,1492140358.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:58.508Z,1492140358.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:58.640Z,1492140358.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:58.904Z,1492140358.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:59.326Z,1492140359.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:59.436Z,1492140359.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:25:59.698Z,1492140359.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:25:59.845Z,1492140359.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:00.122Z,1492140360.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:00.523Z,1492140360.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:00.640Z,1492140360.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:00.881Z,1492140360.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:01.285Z,1492140361.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:01.438Z,1492140361.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:01.686Z,1492140361.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:01.848Z,1492140361.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:02.095Z,1492140362.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:02.470Z,1492140362.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:02.656Z,1492140362.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:02.892Z,1492140362.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:03.306Z,1492140363.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:03.452Z,1492140363.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:03.711Z,1492140363.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:03.864Z,1492140363.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:04.107Z,1492140364.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:04.482Z,1492140364.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:04.660Z,1492140364.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:04.909Z,1492140364.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:04.916Z,1492140364.916 [Startup:StartupSatComms:B](INFO): Timed out from 2017-04-14T03:25:04.8Z
2017-04-14T03:26:04.916Z,1492140364.916 [Startup:StartupSatComms:B] Stopped
2017-04-14T03:26:04.917Z,1492140364.917 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-04-14T03:26:04.917Z,1492140364.917 [Startup:StartupSatComms] Stopped
2017-04-14T03:26:04.917Z,1492140364.917 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-04-14T03:26:04.918Z,1492140364.918 [Startup](INFO): Completed Startup
2017-04-14T03:26:04.918Z,1492140364.918 [MissionManager](INFO): Startup is completed.
2017-04-14T03:26:04.918Z,1492140364.918 [MissionManager](INFO): Uninitializing Mission Startup
2017-04-14T03:26:04.918Z,1492140364.918 [Startup] Stopped
2017-04-14T03:26:04.918Z,1492140364.918 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-04-14T03:26:04.918Z,1492140364.918 [Startup:A.GoToSurface] Stopped
2017-04-14T03:26:04.918Z,1492140364.918 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-04-14T03:26:05.291Z,1492140365.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:05.318Z,1492140365.318 [MissionManager](IMPORTANT): Started mission Default
2017-04-14T03:26:05.319Z,1492140365.319 [Default] Running Loop=1
2017-04-14T03:26:05.319Z,1492140365.319 [Default](DEBUG): Aggregate::initialize Default
2017-04-14T03:26:05.319Z,1492140365.319 [Default:B.GoToSurface] Running Loop=1
2017-04-14T03:26:05.319Z,1492140365.319 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-04-14T03:26:05.319Z,1492140365.319 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-04-14T03:26:05.319Z,1492140365.319 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-04-14T03:26:05.320Z,1492140365.320 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-04-14T03:26:05.320Z,1492140365.320 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-04-14T03:26:05.320Z,1492140365.320 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-04-14T03:26:05.321Z,1492140365.321 [Default:A.Wait] Running Loop=1
2017-04-14T03:26:05.321Z,1492140365.321 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:26:05.456Z,1492140365.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:05.695Z,1492140365.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:05.876Z,1492140365.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:06.080Z,1492140366.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:06.493Z,1492140366.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:06.673Z,1492140366.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:06.868Z,1492140366.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:07.288Z,1492140367.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:07.468Z,1492140367.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:07.789Z,1492140367.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:08.105Z,1492140368.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:08.208Z,1492140368.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:08.502Z,1492140368.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:08.895Z,1492140368.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:09.005Z,1492140369.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:09.304Z,1492140369.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:09.780Z,1492140369.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:09.804Z,1492140369.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:10.091Z,1492140370.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:10.236Z,1492140370.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:10.486Z,1492140370.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:10.892Z,1492140370.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:11.032Z,1492140371.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:11.367Z,1492140371.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:11.680Z,1492140371.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:11.836Z,1492140371.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:12.088Z,1492140372.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:12.240Z,1492140372.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:12.538Z,1492140372.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:12.902Z,1492140372.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:13.391Z,1492140373.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:13.699Z,1492140373.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:14.126Z,1492140374.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:14.517Z,1492140374.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:14.901Z,1492140374.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:15.300Z,1492140375.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:15.682Z,1492140375.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:16.076Z,1492140376.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:16.479Z,1492140376.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:16.882Z,1492140376.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:17.279Z,1492140377.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:17.689Z,1492140377.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:18.084Z,1492140378.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:18.489Z,1492140378.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:18.495Z,1492140378.495 [Default:A.Wait](INFO): Done Waiting.
2017-04-14T03:26:18.495Z,1492140378.495 [Default:A.Wait] Stopped
2017-04-14T03:26:18.495Z,1492140378.495 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T03:26:18.625Z,1492140378.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:18.894Z,1492140378.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:18.899Z,1492140378.899 [Default:CheckIn] Running Loop=1
2017-04-14T03:26:18.900Z,1492140378.900 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T03:26:18.900Z,1492140378.900 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T03:26:19.298Z,1492140379.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:19.303Z,1492140379.303 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-04-14T03:26:19.421Z,1492140379.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:19.692Z,1492140379.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:19.852Z,1492140379.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:20.096Z,1492140380.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:20.492Z,1492140380.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:20.648Z,1492140380.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:20.894Z,1492140380.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:21.285Z,1492140381.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:21.444Z,1492140381.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:21.752Z,1492140381.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:22.098Z,1492140382.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:22.164Z,1492140382.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:22.472Z,1492140382.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:22.874Z,1492140382.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:22.960Z,1492140382.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:23.278Z,1492140383.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:23.756Z,1492140383.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:23.769Z,1492140383.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:24.086Z,1492140384.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:24.160Z,1492140384.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:24.508Z,1492140384.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:24.927Z,1492140384.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:24.956Z,1492140384.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:25.288Z,1492140385.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:25.699Z,1492140385.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:25.752Z,1492140385.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:26.103Z,1492140386.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:26.156Z,1492140386.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:26.490Z,1492140386.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:26.889Z,1492140386.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:26.952Z,1492140386.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:27.294Z,1492140387.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:27.678Z,1492140387.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:27.748Z,1492140387.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:28.114Z,1492140388.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:28.152Z,1492140388.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:28.507Z,1492140388.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:28.887Z,1492140388.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:28.948Z,1492140388.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:29.285Z,1492140389.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:29.692Z,1492140389.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:29.744Z,1492140389.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:30.096Z,1492140390.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:30.148Z,1492140390.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:30.496Z,1492140390.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:30.906Z,1492140390.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:30.944Z,1492140390.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:31.284Z,1492140391.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:31.698Z,1492140391.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:31.740Z,1492140391.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:32.094Z,1492140392.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:32.144Z,1492140392.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:32.465Z,1492140392.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:32.894Z,1492140392.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:32.940Z,1492140392.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:33.274Z,1492140393.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:33.706Z,1492140393.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:33.744Z,1492140393.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:34.078Z,1492140394.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:34.148Z,1492140394.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:34.480Z,1492140394.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:34.881Z,1492140394.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:34.944Z,1492140394.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:35.285Z,1492140395.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:35.740Z,1492140395.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:35.820Z,1492140395.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:36.101Z,1492140396.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:36.144Z,1492140396.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:36.503Z,1492140396.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:36.896Z,1492140396.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:36.940Z,1492140396.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:37.275Z,1492140397.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:37.736Z,1492140397.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:37.751Z,1492140397.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:38.081Z,1492140398.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:38.160Z,1492140398.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:38.475Z,1492140398.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:38.886Z,1492140398.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:38.957Z,1492140398.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:39.361Z,1492140399.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:39.683Z,1492140399.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:39.752Z,1492140399.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:40.097Z,1492140400.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:40.156Z,1492140400.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:40.511Z,1492140400.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:40.895Z,1492140400.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:40.952Z,1492140400.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:41.394Z,1492140401.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:41.689Z,1492140401.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:41.748Z,1492140401.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:42.095Z,1492140402.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:42.153Z,1492140402.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:42.510Z,1492140402.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:42.887Z,1492140402.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:42.948Z,1492140402.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:43.367Z,1492140403.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:43.680Z,1492140403.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:43.744Z,1492140403.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:44.082Z,1492140404.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:44.148Z,1492140404.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:44.480Z,1492140404.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:44.880Z,1492140404.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:44.944Z,1492140404.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:45.380Z,1492140405.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:45.693Z,1492140405.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:45.740Z,1492140405.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:46.100Z,1492140406.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:46.144Z,1492140406.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:46.493Z,1492140406.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:46.888Z,1492140406.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:46.940Z,1492140406.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:47.290Z,1492140407.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:47.674Z,1492140407.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:47.736Z,1492140407.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:48.074Z,1492140408.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:48.140Z,1492140408.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:48.501Z,1492140408.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:48.899Z,1492140408.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:48.936Z,1492140408.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:49.275Z,1492140409.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:49.732Z,1492140409.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:49.753Z,1492140409.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:50.083Z,1492140410.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:50.149Z,1492140410.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:50.495Z,1492140410.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:50.902Z,1492140410.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:50.944Z,1492140410.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:51.297Z,1492140411.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:51.741Z,1492140411.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:51.755Z,1492140411.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:52.084Z,1492140412.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:52.148Z,1492140412.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:52.490Z,1492140412.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:52.886Z,1492140412.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:52.947Z,1492140412.947 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:53.406Z,1492140413.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:53.676Z,1492140413.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:53.744Z,1492140413.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:54.130Z,1492140414.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:54.148Z,1492140414.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:54.479Z,1492140414.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:54.908Z,1492140414.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:54.962Z,1492140414.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:55.377Z,1492140415.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:55.688Z,1492140415.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:55.757Z,1492140415.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:56.118Z,1492140416.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:56.164Z,1492140416.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:56.518Z,1492140416.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:56.894Z,1492140416.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:56.961Z,1492140416.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:57.384Z,1492140417.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:57.685Z,1492140417.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:57.756Z,1492140417.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:58.080Z,1492140418.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:58.481Z,1492140418.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:58.552Z,1492140418.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:58.890Z,1492140418.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:59.348Z,1492140419.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:26:59.361Z,1492140419.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:59.678Z,1492140419.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:26:59.812Z,1492140419.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:00.101Z,1492140420.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:00.486Z,1492140420.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:00.608Z,1492140420.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:00.920Z,1492140420.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:01.408Z,1492140421.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:01.425Z,1492140421.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:01.790Z,1492140421.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:01.884Z,1492140421.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:02.107Z,1492140422.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:02.672Z,1492140422.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:02.680Z,1492140422.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:02.971Z,1492140422.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:03.335Z,1492140423.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:03.476Z,1492140423.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:03.758Z,1492140423.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:04.091Z,1492140424.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:04.184Z,1492140424.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:04.492Z,1492140424.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:04.882Z,1492140424.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:04.980Z,1492140424.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:05.270Z,1492140425.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:05.768Z,1492140425.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:05.796Z,1492140425.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:06.094Z,1492140426.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:06.200Z,1492140426.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:06.498Z,1492140426.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:06.897Z,1492140426.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:06.996Z,1492140426.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:07.416Z,1492140427.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:07.706Z,1492140427.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:07.796Z,1492140427.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:08.086Z,1492140428.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:08.200Z,1492140428.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:08.482Z,1492140428.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:08.941Z,1492140428.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:08.996Z,1492140428.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:09.374Z,1492140429.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:09.718Z,1492140429.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:09.764Z,1492140429.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:10.080Z,1492140430.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:10.506Z,1492140430.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:10.560Z,1492140430.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:10.917Z,1492140430.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:11.356Z,1492140431.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:11.385Z,1492140431.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:11.715Z,1492140431.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:11.776Z,1492140431.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:12.093Z,1492140432.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:12.492Z,1492140432.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:12.572Z,1492140432.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:12.884Z,1492140432.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:13.369Z,1492140433.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:13.402Z,1492140433.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:13.710Z,1492140433.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:13.772Z,1492140433.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:14.117Z,1492140434.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:14.478Z,1492140434.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:14.568Z,1492140434.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:14.893Z,1492140434.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:15.364Z,1492140435.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:15.800Z,1492140435.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:16.596Z,1492140436.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:17.392Z,1492140437.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:18.080Z,1492140438.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:18.876Z,1492140438.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:18.947Z,1492140438.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:19.083Z,1492140439.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:19.474Z,1492140439.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:19.672Z,1492140439.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:19.822Z,1492140439.822 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.005700
2017-04-14T03:27:19.886Z,1492140439.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:20.076Z,1492140440.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:20.284Z,1492140440.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:20.674Z,1492140440.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:20.872Z,1492140440.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:21.051Z,1492140441.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:21.482Z,1492140441.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:21.668Z,1492140441.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:21.860Z,1492140441.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:22.072Z,1492140442.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:22.263Z,1492140442.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:22.723Z,1492140442.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:22.869Z,1492140442.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:23.291Z,1492140443.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:23.579Z,1492140443.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:23.664Z,1492140443.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:23.998Z,1492140443.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:24.068Z,1492140444.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:24.398Z,1492140444.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:24.785Z,1492140444.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:24.864Z,1492140444.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:25.165Z,1492140445.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:25.587Z,1492140445.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:25.660Z,1492140445.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:25.928Z,1492140445.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:26.064Z,1492140446.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:26.326Z,1492140446.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:26.677Z,1492140446.677 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-04-14T03:27:26.736Z,1492140446.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:26.860Z,1492140446.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:27.124Z,1492140447.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:27.526Z,1492140447.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:27.656Z,1492140447.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:27.919Z,1492140447.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:28.060Z,1492140448.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:28.324Z,1492140448.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:28.725Z,1492140448.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:28.856Z,1492140448.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:29.134Z,1492140449.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:29.535Z,1492140449.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:29.652Z,1492140449.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:29.924Z,1492140449.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:30.056Z,1492140450.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:30.321Z,1492140450.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:30.724Z,1492140450.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:30.852Z,1492140450.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:31.128Z,1492140451.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:31.522Z,1492140451.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:31.648Z,1492140451.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:31.958Z,1492140451.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:32.052Z,1492140452.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:32.286Z,1492140452.286 [NAL9602](INFO): GPS fix at 20170414T032731: (36.802340, -121.787140)
2017-04-14T03:27:32.383Z,1492140452.383 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T03:27:32.383Z,1492140452.383 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T03:27:32.786Z,1492140452.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:32.786Z,1492140452.786 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:27:32.786Z,1492140452.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:27:32.793Z,1492140452.793 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:32.793Z,1492140452.793 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:27:32.793Z,1492140452.793 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:27:32.798Z,1492140452.797 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-04-14T03:27:32.813Z,1492140452.813 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:27:32.813Z,1492140452.813 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:27:32.848Z,1492140452.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:33.377Z,1492140453.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:27:33.377Z,1492140453.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:27:33.378Z,1492140453.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:27:33.378Z,1492140453.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:27:33.644Z,1492140453.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:33.690Z,1492140453.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:27:33.691Z,1492140453.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:27:33.691Z,1492140453.691 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:27:33.696Z,1492140453.696 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:27:33.697Z,1492140453.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:27:33.697Z,1492140453.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:27:34.080Z,1492140454.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:34.877Z,1492140454.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:35.672Z,1492140455.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:36.076Z,1492140456.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:36.872Z,1492140456.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:37.668Z,1492140457.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:38.073Z,1492140458.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:38.868Z,1492140458.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:38.927Z,1492140458.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:39.009Z,1492140459.009 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170414T013305/Courier0068.lzma
2017-04-14T03:27:39.100Z,1492140459.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:39.454Z,1492140459.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:39.665Z,1492140459.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:39.806Z,1492140459.806 [DataOverHttps](INFO): Moved sent file to Logs/20170414T013305/Courier0068.lzma.bak
2017-04-14T03:27:39.806Z,1492140459.806 [DataOverHttps](INFO): SBD MOMSN=4884855
2017-04-14T03:27:39.921Z,1492140459.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:40.072Z,1492140460.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:40.300Z,1492140460.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:40.697Z,1492140460.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:40.868Z,1492140460.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:41.664Z,1492140461.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:42.068Z,1492140462.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:42.866Z,1492140462.866 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:43.660Z,1492140463.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:44.064Z,1492140464.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:44.581Z,1492140464.581 [NAL9602](INFO): Powering down
2017-04-14T03:27:44.679Z,1492140464.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:44.827Z,1492140464.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:44.868Z,1492140464.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:45.166Z,1492140465.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:45.665Z,1492140465.665 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:45.736Z,1492140465.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:45.997Z,1492140465.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:46.088Z,1492140466.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:46.378Z,1492140466.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:46.884Z,1492140466.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:47.680Z,1492140467.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:48.085Z,1492140468.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:48.880Z,1492140468.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:49.677Z,1492140469.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:50.088Z,1492140470.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:50.884Z,1492140470.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:51.680Z,1492140471.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:52.084Z,1492140472.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:52.396Z,1492140472.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:52.476Z,1492140472.476 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20170414T032153/Courier0004.lzma
2017-04-14T03:27:52.589Z,1492140472.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:52.884Z,1492140472.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:52.915Z,1492140472.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:53.278Z,1492140473.278 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0004.lzma.bak
2017-04-14T03:27:53.278Z,1492140473.278 [DataOverHttps](INFO): SBD MOMSN=4884857
2017-04-14T03:27:53.380Z,1492140473.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:53.688Z,1492140473.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:54.029Z,1492140474.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:54.092Z,1492140474.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:54.194Z,1492140474.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:27:54.889Z,1492140474.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:55.684Z,1492140475.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:56.088Z,1492140476.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:56.884Z,1492140476.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:57.680Z,1492140477.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:58.084Z,1492140478.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:58.880Z,1492140478.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:27:59.681Z,1492140479.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:00.096Z,1492140480.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:00.894Z,1492140480.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:01.688Z,1492140481.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:02.092Z,1492140482.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:02.896Z,1492140482.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:03.454Z,1492140483.454 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:28:03.454Z,1492140483.454 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:28:03.454Z,1492140483.454 [BPC1](ERROR): Communications Fault
2017-04-14T03:28:03.484Z,1492140483.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:03.652Z,1492140483.652 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:28:03.692Z,1492140483.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:03.800Z,1492140483.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:04.100Z,1492140484.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:04.157Z,1492140484.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:04.530Z,1492140484.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:04.597Z,1492140484.597 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:28:04.597Z,1492140484.597 [BPC1] No Fault, FailCount= 1
2017-04-14T03:28:04.896Z,1492140484.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:05.070Z,1492140485.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:05.358Z,1492140485.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:05.692Z,1492140485.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:06.096Z,1492140486.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:06.892Z,1492140486.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:07.689Z,1492140487.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:08.096Z,1492140488.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:08.892Z,1492140488.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:09.656Z,1492140489.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:09.793Z,1492140489.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:09.900Z,1492140489.899 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20170414T013305/Express0069.lzma
2017-04-14T03:28:09.963Z,1492140489.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:10.394Z,1492140490.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:10.453Z,1492140490.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:10.677Z,1492140490.677 [DataOverHttps](INFO): Moved sent file to Logs/20170414T013305/Express0069.lzma.bak
2017-04-14T03:28:10.678Z,1492140490.678 [DataOverHttps](INFO): SBD MOMSN=4884861
2017-04-14T03:28:10.792Z,1492140490.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:11.176Z,1492140491.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:11.250Z,1492140491.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:11.526Z,1492140491.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:11.712Z,1492140491.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:12.508Z,1492140492.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:13.304Z,1492140493.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:13.988Z,1492140493.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:14.784Z,1492140494.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:15.295Z,1492140495.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:15.330Z,1492140495.330 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:15.330Z,1492140495.330 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:28:15.330Z,1492140495.330 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:28:15.344Z,1492140495.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:28:15.451Z,1492140495.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:15.580Z,1492140495.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:15.588Z,1492140495.588 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:28:15.588Z,1492140495.588 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:28:15.812Z,1492140495.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:15.818Z,1492140495.818 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:28:15.818Z,1492140495.818 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:28:15.818Z,1492140495.818 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:28:16.044Z,1492140496.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:16.215Z,1492140496.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:16.607Z,1492140496.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:16.841Z,1492140496.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:17.018Z,1492140497.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:17.638Z,1492140497.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:18.044Z,1492140498.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:18.840Z,1492140498.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:19.638Z,1492140499.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:20.044Z,1492140500.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:20.840Z,1492140500.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:20.908Z,1492140500.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:20.993Z,1492140500.993 [DataOverHttps](INFO): Sending 553 bytes from file Logs/20170414T032153/Express0001.lzma
2017-04-14T03:28:21.067Z,1492140501.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:21.396Z,1492140501.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:21.637Z,1492140501.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:21.741Z,1492140501.741 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0001.lzma.bak
2017-04-14T03:28:21.742Z,1492140501.741 [DataOverHttps](INFO): SBD MOMSN=4884863
2017-04-14T03:28:21.846Z,1492140501.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:22.044Z,1492140502.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:22.207Z,1492140502.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:22.607Z,1492140502.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:22.840Z,1492140502.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:23.636Z,1492140503.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:24.040Z,1492140504.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:24.836Z,1492140504.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:25.632Z,1492140505.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:26.036Z,1492140506.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:26.191Z,1492140506.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:26.362Z,1492140506.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:26.706Z,1492140506.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:26.833Z,1492140506.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:27.069Z,1492140507.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:27.534Z,1492140507.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:27.628Z,1492140507.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:27.878Z,1492140507.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:28.032Z,1492140508.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:28.828Z,1492140508.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:29.625Z,1492140509.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:30.032Z,1492140510.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:30.828Z,1492140510.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:31.626Z,1492140511.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:32.032Z,1492140512.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:32.098Z,1492140512.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:32.188Z,1492140512.188 [DataOverHttps](INFO): Sending 300 bytes from file Logs/20170414T032153/Express0005.lzma
2017-04-14T03:28:32.257Z,1492140512.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:32.595Z,1492140512.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:32.828Z,1492140512.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:32.953Z,1492140512.953 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0005.lzma.bak
2017-04-14T03:28:32.953Z,1492140512.954 [DataOverHttps](INFO): SBD MOMSN=4884873
2017-04-14T03:28:33.017Z,1492140513.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:33.411Z,1492140513.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:33.420Z,1492140513.420 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T03:28:33.420Z,1492140513.420 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T03:28:33.420Z,1492140513.420 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:28:33.604Z,1492140513.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:33.805Z,1492140513.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:34.213Z,1492140514.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:34.400Z,1492140514.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:34.607Z,1492140514.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:35.007Z,1492140515.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:35.196Z,1492140515.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:35.600Z,1492140515.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:36.397Z,1492140516.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:37.192Z,1492140517.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:37.609Z,1492140517.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:38.404Z,1492140518.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:38.669Z,1492140518.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:38.802Z,1492140518.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:39.204Z,1492140519.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:39.289Z,1492140519.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:39.629Z,1492140519.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:39.676Z,1492140519.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:39.972Z,1492140519.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:40.426Z,1492140520.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:40.472Z,1492140520.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:40.821Z,1492140520.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:41.177Z,1492140521.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:41.268Z,1492140521.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:41.599Z,1492140521.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:41.916Z,1492140521.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:41.986Z,1492140521.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:42.426Z,1492140522.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:42.713Z,1492140522.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:42.799Z,1492140522.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:43.162Z,1492140523.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:43.508Z,1492140523.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:43.594Z,1492140523.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:43.916Z,1492140523.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:44.000Z,1492140524.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:44.394Z,1492140524.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:44.712Z,1492140524.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:44.814Z,1492140524.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:45.232Z,1492140525.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:45.508Z,1492140525.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:45.606Z,1492140525.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:45.912Z,1492140525.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:45.986Z,1492140525.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:46.385Z,1492140526.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:46.708Z,1492140526.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:46.785Z,1492140526.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:47.224Z,1492140527.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:47.504Z,1492140527.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:47.605Z,1492140527.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:47.908Z,1492140527.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:47.998Z,1492140527.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:48.396Z,1492140528.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:48.704Z,1492140528.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:48.823Z,1492140528.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:49.228Z,1492140529.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:49.500Z,1492140529.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:49.588Z,1492140529.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:49.904Z,1492140529.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:49.996Z,1492140529.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:50.410Z,1492140530.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:50.700Z,1492140530.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:50.790Z,1492140530.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:51.230Z,1492140531.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:51.496Z,1492140531.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:51.589Z,1492140531.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:51.900Z,1492140531.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:52.001Z,1492140532.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:52.397Z,1492140532.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:52.696Z,1492140532.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:52.821Z,1492140532.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:53.282Z,1492140533.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:53.492Z,1492140533.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:53.590Z,1492140533.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:53.896Z,1492140533.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:54.002Z,1492140534.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:54.418Z,1492140534.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:54.692Z,1492140534.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:54.789Z,1492140534.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:55.205Z,1492140535.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:55.488Z,1492140535.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:55.618Z,1492140535.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:55.898Z,1492140535.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:55.984Z,1492140535.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:56.377Z,1492140536.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:56.692Z,1492140536.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:56.790Z,1492140536.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:57.190Z,1492140537.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:57.488Z,1492140537.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:57.591Z,1492140537.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:57.892Z,1492140537.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:57.985Z,1492140537.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:58.395Z,1492140538.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:58.688Z,1492140538.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:58.783Z,1492140538.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:59.207Z,1492140539.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:59.484Z,1492140539.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:59.589Z,1492140539.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:28:59.888Z,1492140539.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:28:59.993Z,1492140539.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:00.383Z,1492140540.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:00.684Z,1492140540.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:00.784Z,1492140540.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:01.220Z,1492140541.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:01.480Z,1492140541.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:01.621Z,1492140541.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:01.884Z,1492140541.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:02.050Z,1492140542.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:02.393Z,1492140542.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:02.680Z,1492140542.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:02.790Z,1492140542.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:03.212Z,1492140543.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:03.476Z,1492140543.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:03.638Z,1492140543.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:03.880Z,1492140543.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:03.986Z,1492140543.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:04.399Z,1492140544.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:04.676Z,1492140544.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:04.790Z,1492140544.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:05.238Z,1492140545.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:05.472Z,1492140545.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:05.633Z,1492140545.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:05.876Z,1492140545.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:05.986Z,1492140545.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:06.393Z,1492140546.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:06.672Z,1492140546.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:06.807Z,1492140546.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:07.270Z,1492140547.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:07.468Z,1492140547.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:07.642Z,1492140547.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:07.872Z,1492140547.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:07.999Z,1492140547.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:08.432Z,1492140548.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:08.668Z,1492140548.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:08.792Z,1492140548.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:09.231Z,1492140549.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:09.465Z,1492140549.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:09.638Z,1492140549.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:09.884Z,1492140549.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:09.982Z,1492140549.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:10.390Z,1492140550.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:10.680Z,1492140550.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:10.788Z,1492140550.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:11.185Z,1492140551.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:11.476Z,1492140551.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:11.605Z,1492140551.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:11.880Z,1492140551.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:11.990Z,1492140551.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:12.366Z,1492140552.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:12.676Z,1492140552.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:12.792Z,1492140552.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:13.197Z,1492140553.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:13.476Z,1492140553.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:13.595Z,1492140553.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:13.880Z,1492140553.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:13.976Z,1492140553.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:14.381Z,1492140554.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:14.676Z,1492140554.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:14.795Z,1492140554.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:15.191Z,1492140555.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:15.472Z,1492140555.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:15.605Z,1492140555.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:15.876Z,1492140555.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:15.989Z,1492140555.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:16.422Z,1492140556.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:16.672Z,1492140556.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:16.774Z,1492140556.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:17.181Z,1492140557.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:17.468Z,1492140557.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:17.586Z,1492140557.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:17.872Z,1492140557.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:17.990Z,1492140557.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:18.408Z,1492140558.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:18.668Z,1492140558.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:18.786Z,1492140558.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:19.226Z,1492140559.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:19.466Z,1492140559.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:19.588Z,1492140559.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:19.872Z,1492140559.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:19.985Z,1492140559.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:20.396Z,1492140560.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:20.668Z,1492140560.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:20.794Z,1492140560.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:21.222Z,1492140561.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:21.464Z,1492140561.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:21.659Z,1492140561.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:21.868Z,1492140561.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:22.044Z,1492140562.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:22.425Z,1492140562.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:22.664Z,1492140562.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:22.826Z,1492140562.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:23.214Z,1492140563.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:23.460Z,1492140563.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:23.650Z,1492140563.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:23.872Z,1492140563.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:24.045Z,1492140564.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:24.402Z,1492140564.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:24.668Z,1492140564.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:24.790Z,1492140564.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:25.185Z,1492140565.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:25.465Z,1492140565.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:25.590Z,1492140565.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:25.872Z,1492140565.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:25.984Z,1492140565.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:26.385Z,1492140566.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:26.668Z,1492140566.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:26.785Z,1492140566.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:27.188Z,1492140567.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:27.469Z,1492140567.469 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:27.586Z,1492140567.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:27.876Z,1492140567.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:27.978Z,1492140567.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:28.371Z,1492140568.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:28.674Z,1492140568.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:28.791Z,1492140568.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:29.167Z,1492140569.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:29.468Z,1492140569.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:29.591Z,1492140569.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:29.872Z,1492140569.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:29.973Z,1492140569.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:30.372Z,1492140570.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:30.668Z,1492140570.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:30.774Z,1492140570.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:31.173Z,1492140571.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:31.464Z,1492140571.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:31.574Z,1492140571.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:31.868Z,1492140571.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:31.982Z,1492140571.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:32.374Z,1492140572.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:32.664Z,1492140572.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:32.780Z,1492140572.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:33.184Z,1492140573.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:33.460Z,1492140573.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:33.581Z,1492140573.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:33.864Z,1492140573.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:33.985Z,1492140573.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:34.660Z,1492140574.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:35.456Z,1492140575.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:35.860Z,1492140575.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:36.656Z,1492140576.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:37.454Z,1492140577.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:37.860Z,1492140577.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:37.952Z,1492140577.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:38.073Z,1492140578.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:38.456Z,1492140578.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:38.656Z,1492140578.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:38.813Z,1492140578.813 [DataOverHttps](IMPORTANT): SBD MTMSN=20170414T032938
2017-04-14T03:29:38.890Z,1492140578.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:39.258Z,1492140579.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:39.452Z,1492140579.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:39.714Z,1492140579.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:39.856Z,1492140579.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:40.652Z,1492140580.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:41.448Z,1492140581.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:41.852Z,1492140581.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:42.648Z,1492140582.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:43.444Z,1492140583.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:43.562Z,1492140583.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:43.641Z,1492140583.641 [DataOverHttps](INFO): Received command:configSet list
2017-04-14T03:29:43.684Z,1492140583.684 [CommandLine](IMPORTANT): got command configSet list
2017-04-14T03:29:43.685Z,1492140583.685 [CommandLine](IMPORTANT): Listing configuration overrides from Data/persisted.cfg
2017-04-14T03:29:43.686Z,1492140583.686 [CommandLine](IMPORTANT): Aanderaa_O2.loadAtStartup=1 bool;

2017-04-14T03:29:43.686Z,1492140583.686 [CommandLine](IMPORTANT): CTD_Seabird.loadAtStartup=1 bool;

2017-04-14T03:29:43.686Z,1492140583.686 [CommandLine](IMPORTANT): PAR_Licor.loadAtStartup=1 bool;

2017-04-14T03:29:43.686Z,1492140583.686 [CommandLine](IMPORTANT): WetLabsBB2FL.loadAtStartup=1 bool;

2017-04-14T03:29:43.729Z,1492140583.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:43.848Z,1492140583.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:44.080Z,1492140584.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:44.470Z,1492140584.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:44.644Z,1492140584.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:44.869Z,1492140584.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:45.269Z,1492140585.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:45.440Z,1492140585.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:45.672Z,1492140585.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:45.844Z,1492140585.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:46.062Z,1492140586.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:46.468Z,1492140586.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:46.640Z,1492140586.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:46.862Z,1492140586.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:47.262Z,1492140587.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:47.437Z,1492140587.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:47.671Z,1492140587.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:47.844Z,1492140587.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:48.070Z,1492140588.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:48.462Z,1492140588.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:48.640Z,1492140588.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:48.865Z,1492140588.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:49.275Z,1492140589.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:49.436Z,1492140589.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:49.669Z,1492140589.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:49.840Z,1492140589.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:50.065Z,1492140590.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:50.475Z,1492140590.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:50.636Z,1492140590.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:50.873Z,1492140590.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:51.295Z,1492140591.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:51.432Z,1492140591.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:51.687Z,1492140591.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:51.864Z,1492140591.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:52.066Z,1492140592.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:52.457Z,1492140592.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:52.660Z,1492140592.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:52.862Z,1492140592.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:53.266Z,1492140593.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:53.456Z,1492140593.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:53.686Z,1492140593.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:53.862Z,1492140593.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:54.069Z,1492140594.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:54.481Z,1492140594.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:54.656Z,1492140594.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:54.888Z,1492140594.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:55.266Z,1492140595.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:55.453Z,1492140595.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:55.730Z,1492140595.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:55.864Z,1492140595.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:56.061Z,1492140596.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:56.509Z,1492140596.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:56.661Z,1492140596.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:56.918Z,1492140596.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:57.301Z,1492140597.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:57.456Z,1492140597.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:57.710Z,1492140597.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:57.862Z,1492140597.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:58.077Z,1492140598.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:58.484Z,1492140598.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:58.657Z,1492140598.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:58.858Z,1492140598.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:59.283Z,1492140599.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:59.452Z,1492140599.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:29:59.683Z,1492140599.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:29:59.857Z,1492140599.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:00.062Z,1492140600.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:00.453Z,1492140600.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:00.652Z,1492140600.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:00.864Z,1492140600.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:01.289Z,1492140601.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:01.450Z,1492140601.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:01.668Z,1492140601.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:01.856Z,1492140601.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:02.072Z,1492140602.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:02.467Z,1492140602.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:02.652Z,1492140602.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:02.868Z,1492140602.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:03.273Z,1492140603.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:03.449Z,1492140603.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:03.673Z,1492140603.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:03.852Z,1492140603.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:04.065Z,1492140604.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:04.475Z,1492140604.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:04.649Z,1492140604.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:04.855Z,1492140604.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:05.276Z,1492140605.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:05.444Z,1492140605.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:05.678Z,1492140605.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:05.848Z,1492140605.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:06.077Z,1492140606.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:06.452Z,1492140606.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:06.644Z,1492140606.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:06.852Z,1492140606.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:07.262Z,1492140607.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:07.440Z,1492140607.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:07.700Z,1492140607.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:07.845Z,1492140607.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:08.061Z,1492140608.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:08.464Z,1492140608.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:08.640Z,1492140608.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:08.862Z,1492140608.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:09.266Z,1492140609.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:09.436Z,1492140609.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:09.746Z,1492140609.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:10.061Z,1492140610.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:10.232Z,1492140610.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:10.501Z,1492140610.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:10.865Z,1492140610.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:11.028Z,1492140611.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:11.298Z,1492140611.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:11.433Z,1492140611.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:11.687Z,1492140611.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:12.070Z,1492140612.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:12.228Z,1492140612.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:12.465Z,1492140612.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:12.889Z,1492140612.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:13.025Z,1492140613.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:13.258Z,1492140613.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:13.457Z,1492140613.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:13.660Z,1492140613.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:14.059Z,1492140614.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:14.252Z,1492140614.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:14.463Z,1492140614.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:14.861Z,1492140614.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:15.048Z,1492140615.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:15.268Z,1492140615.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:15.452Z,1492140615.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:15.670Z,1492140615.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:16.065Z,1492140616.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:16.248Z,1492140616.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:16.462Z,1492140616.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:16.866Z,1492140616.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:17.048Z,1492140617.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:17.265Z,1492140617.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:17.472Z,1492140617.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:17.662Z,1492140617.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:18.062Z,1492140618.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:18.268Z,1492140618.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:18.464Z,1492140618.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:18.863Z,1492140618.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:19.064Z,1492140619.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:19.271Z,1492140619.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:19.665Z,1492140619.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:19.796Z,1492140619.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:20.075Z,1492140620.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:20.479Z,1492140620.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:20.592Z,1492140620.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:20.870Z,1492140620.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:21.305Z,1492140621.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:21.388Z,1492140621.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:21.672Z,1492140621.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:21.833Z,1492140621.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:22.068Z,1492140622.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:22.476Z,1492140622.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:22.628Z,1492140622.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:22.866Z,1492140622.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:23.264Z,1492140623.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:23.412Z,1492140623.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:23.670Z,1492140623.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:24.154Z,1492140624.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:24.210Z,1492140624.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:24.493Z,1492140624.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:24.882Z,1492140624.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:25.004Z,1492140625.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:25.264Z,1492140625.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:25.417Z,1492140625.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:25.698Z,1492140625.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:26.060Z,1492140626.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:26.212Z,1492140626.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:26.491Z,1492140626.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:26.872Z,1492140626.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:27.008Z,1492140627.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:27.272Z,1492140627.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:27.436Z,1492140627.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:27.686Z,1492140627.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:28.068Z,1492140628.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:28.232Z,1492140628.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:28.478Z,1492140628.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:28.858Z,1492140628.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:29.028Z,1492140629.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:29.269Z,1492140629.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:29.460Z,1492140629.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:29.677Z,1492140629.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:30.052Z,1492140630.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:30.256Z,1492140630.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:30.453Z,1492140630.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:30.860Z,1492140630.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:31.052Z,1492140631.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:31.425Z,1492140631.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:31.512Z,1492140631.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:31.738Z,1492140631.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:32.125Z,1492140632.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:32.308Z,1492140632.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:32.506Z,1492140632.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:32.956Z,1492140632.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:33.104Z,1492140633.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:33.421Z,1492140633.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:33.732Z,1492140633.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:33.732Z,1492140633.732 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T03:30:33.732Z,1492140633.732 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:30:33.755Z,1492140633.755 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:33.755Z,1492140633.755 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T03:30:33.755Z,1492140633.755 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:30:33.809Z,1492140633.809 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:30:33.809Z,1492140633.809 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:30:33.876Z,1492140633.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:34.158Z,1492140634.158 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:30:34.158Z,1492140634.158 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T03:30:34.171Z,1492140634.171 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:30:34.172Z,1492140634.172 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T03:30:34.494Z,1492140634.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:30:34.494Z,1492140634.494 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:30:34.495Z,1492140634.495 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:30:34.519Z,1492140634.519 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:30:34.520Z,1492140634.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:30:34.520Z,1492140634.520 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:30:34.676Z,1492140634.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:34.975Z,1492140634.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:35.356Z,1492140635.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:35.472Z,1492140635.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:35.683Z,1492140635.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:35.876Z,1492140635.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:36.108Z,1492140636.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:36.467Z,1492140636.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:36.672Z,1492140636.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:36.861Z,1492140636.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:37.245Z,1492140637.245 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T03:30:37.246Z,1492140637.246 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:30:37.246Z,1492140637.246 [BPC1](ERROR): Data Fault
2017-04-14T03:30:37.274Z,1492140637.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:37.321Z,1492140637.321 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:30:37.421Z,1492140637.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:37.665Z,1492140637.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:38.061Z,1492140638.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:38.216Z,1492140638.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:38.461Z,1492140638.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:38.480Z,1492140638.480 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:30:38.480Z,1492140638.480 [BPC1] No Fault, FailCount= 1
2017-04-14T03:30:38.978Z,1492140638.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:39.012Z,1492140639.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:39.268Z,1492140639.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:39.436Z,1492140639.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:39.692Z,1492140639.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:40.232Z,1492140640.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:41.028Z,1492140641.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:41.432Z,1492140641.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:42.228Z,1492140642.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:43.024Z,1492140643.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:43.428Z,1492140643.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:43.469Z,1492140643.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:43.618Z,1492140643.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:43.975Z,1492140643.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:44.224Z,1492140644.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:44.377Z,1492140644.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:44.798Z,1492140644.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:45.021Z,1492140645.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:45.206Z,1492140645.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:45.440Z,1492140645.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:45.563Z,1492140645.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:45.965Z,1492140645.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:46.236Z,1492140646.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:46.403Z,1492140646.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:46.778Z,1492140646.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:47.032Z,1492140647.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:47.205Z,1492140647.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:47.606Z,1492140647.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:47.776Z,1492140647.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:47.980Z,1492140647.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:48.377Z,1492140648.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:48.572Z,1492140648.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:48.786Z,1492140648.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:49.183Z,1492140649.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:49.368Z,1492140649.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:49.596Z,1492140649.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:49.800Z,1492140649.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:49.996Z,1492140649.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:50.364Z,1492140650.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:50.596Z,1492140650.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:50.868Z,1492140650.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:51.278Z,1492140651.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:51.392Z,1492140651.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:51.746Z,1492140651.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:51.797Z,1492140651.797 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:51.998Z,1492140651.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:52.393Z,1492140652.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:52.592Z,1492140652.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:52.803Z,1492140652.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:53.170Z,1492140653.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:53.388Z,1492140653.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:53.678Z,1492140653.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:53.792Z,1492140653.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:54.046Z,1492140654.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:54.395Z,1492140654.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:54.588Z,1492140654.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:54.791Z,1492140654.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:55.240Z,1492140655.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:55.386Z,1492140655.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:55.597Z,1492140655.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:55.792Z,1492140655.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:55.981Z,1492140655.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:56.428Z,1492140656.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:56.590Z,1492140656.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:56.848Z,1492140656.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:57.236Z,1492140657.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:57.384Z,1492140657.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:57.607Z,1492140657.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:57.788Z,1492140657.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:57.979Z,1492140657.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:58.382Z,1492140658.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:58.584Z,1492140658.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:58.813Z,1492140658.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:59.164Z,1492140659.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:59.380Z,1492140659.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:59.574Z,1492140659.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:30:59.785Z,1492140659.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:30:59.989Z,1492140659.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:00.377Z,1492140660.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:00.580Z,1492140660.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:00.774Z,1492140660.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:01.183Z,1492140661.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:01.376Z,1492140661.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:01.562Z,1492140661.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:01.780Z,1492140661.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:01.966Z,1492140661.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:02.371Z,1492140662.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:02.577Z,1492140662.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:02.774Z,1492140662.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:03.169Z,1492140663.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:03.373Z,1492140663.374 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:03.575Z,1492140663.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:03.780Z,1492140663.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:03.968Z,1492140663.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:04.372Z,1492140664.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:04.577Z,1492140664.577 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:04.814Z,1492140664.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:05.175Z,1492140665.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:05.372Z,1492140665.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:05.562Z,1492140665.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:05.776Z,1492140665.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:06.049Z,1492140666.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:06.362Z,1492140666.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:06.572Z,1492140666.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:06.802Z,1492140666.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:07.164Z,1492140667.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:07.373Z,1492140667.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:07.602Z,1492140667.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:07.777Z,1492140667.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:08.010Z,1492140668.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:08.370Z,1492140668.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:08.572Z,1492140668.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:08.768Z,1492140668.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:09.184Z,1492140669.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:09.352Z,1492140669.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:09.578Z,1492140669.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:09.971Z,1492140669.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:10.150Z,1492140670.151 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:10.362Z,1492140670.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:10.760Z,1492140670.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:10.948Z,1492140670.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:11.167Z,1492140671.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:11.352Z,1492140671.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:11.565Z,1492140671.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:11.968Z,1492140671.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:12.148Z,1492140672.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:12.364Z,1492140672.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:12.768Z,1492140672.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:12.945Z,1492140672.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:13.170Z,1492140673.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:13.460Z,1492140673.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:13.581Z,1492140673.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:13.983Z,1492140673.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:14.258Z,1492140674.258 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:14.378Z,1492140674.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:14.775Z,1492140674.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:15.053Z,1492140675.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:15.157Z,1492140675.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:15.581Z,1492140675.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:15.716Z,1492140675.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:15.968Z,1492140675.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:15.975Z,1492140675.975 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:15.975Z,1492140675.975 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T03:31:15.975Z,1492140675.975 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:31:16.010Z,1492140676.010 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:31:16.375Z,1492140676.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:16.418Z,1492140676.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:31:16.418Z,1492140676.418 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T03:31:16.512Z,1492140676.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:16.776Z,1492140676.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:16.781Z,1492140676.782 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:31:16.782Z,1492140676.782 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:31:16.782Z,1492140676.782 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:31:17.170Z,1492140677.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:17.308Z,1492140677.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:17.570Z,1492140677.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:17.712Z,1492140677.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:17.964Z,1492140677.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:18.372Z,1492140678.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:18.508Z,1492140678.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:18.768Z,1492140678.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:19.174Z,1492140679.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:19.304Z,1492140679.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:19.578Z,1492140679.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:19.708Z,1492140679.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:20.024Z,1492140680.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:20.374Z,1492140680.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:20.504Z,1492140680.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:20.794Z,1492140680.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:21.203Z,1492140681.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:21.302Z,1492140681.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:21.594Z,1492140681.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:21.708Z,1492140681.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:22.018Z,1492140682.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:22.405Z,1492140682.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:22.504Z,1492140682.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:22.786Z,1492140682.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:23.188Z,1492140683.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:23.300Z,1492140683.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:23.577Z,1492140683.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:23.704Z,1492140683.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:23.977Z,1492140683.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:24.377Z,1492140684.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:24.500Z,1492140684.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:24.771Z,1492140684.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:25.170Z,1492140685.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:25.296Z,1492140685.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:25.565Z,1492140685.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:25.700Z,1492140685.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:25.968Z,1492140685.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:26.371Z,1492140686.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:26.496Z,1492140686.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:26.758Z,1492140686.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:27.164Z,1492140687.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:27.292Z,1492140687.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:27.574Z,1492140687.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:27.696Z,1492140687.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:27.968Z,1492140687.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:28.364Z,1492140688.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:28.492Z,1492140688.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:28.770Z,1492140688.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:29.165Z,1492140689.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:29.288Z,1492140689.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:29.573Z,1492140689.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:29.692Z,1492140689.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:29.985Z,1492140689.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:30.373Z,1492140690.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:30.488Z,1492140690.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:30.772Z,1492140690.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:31.245Z,1492140691.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:31.284Z,1492140691.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:31.577Z,1492140691.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:31.700Z,1492140691.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:31.976Z,1492140691.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:32.377Z,1492140692.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:32.496Z,1492140692.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:32.777Z,1492140692.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:33.162Z,1492140693.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:33.292Z,1492140693.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:33.566Z,1492140693.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:33.696Z,1492140693.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:33.970Z,1492140693.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:34.446Z,1492140694.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:34.492Z,1492140694.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:34.770Z,1492140694.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:35.217Z,1492140695.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:35.288Z,1492140695.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:35.582Z,1492140695.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:35.692Z,1492140695.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:35.994Z,1492140695.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:36.373Z,1492140696.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:36.488Z,1492140696.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:36.783Z,1492140696.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:37.169Z,1492140697.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:37.285Z,1492140697.285 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:37.568Z,1492140697.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:37.692Z,1492140697.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:37.964Z,1492140697.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:38.370Z,1492140698.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:38.489Z,1492140698.489 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:38.769Z,1492140698.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:39.174Z,1492140699.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:39.284Z,1492140699.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:39.578Z,1492140699.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:39.688Z,1492140699.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:39.970Z,1492140699.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:40.484Z,1492140700.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:41.280Z,1492140701.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:41.684Z,1492140701.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:42.480Z,1492140702.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:43.276Z,1492140703.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:43.533Z,1492140703.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:43.678Z,1492140703.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:43.680Z,1492140703.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:44.037Z,1492140704.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:44.443Z,1492140704.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:44.476Z,1492140704.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:44.837Z,1492140704.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:45.272Z,1492140705.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:45.288Z,1492140705.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:45.642Z,1492140705.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:45.680Z,1492140705.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:46.043Z,1492140706.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:46.441Z,1492140706.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:46.476Z,1492140706.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:46.937Z,1492140706.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:47.221Z,1492140707.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:47.272Z,1492140707.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:47.652Z,1492140707.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:47.676Z,1492140707.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:48.054Z,1492140708.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:48.472Z,1492140708.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:48.501Z,1492140708.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:48.902Z,1492140708.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:49.266Z,1492140709.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:49.268Z,1492140709.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:49.634Z,1492140709.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:49.672Z,1492140709.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:50.058Z,1492140710.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:50.468Z,1492140710.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:50.481Z,1492140710.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:50.916Z,1492140710.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:51.220Z,1492140711.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:51.264Z,1492140711.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:51.653Z,1492140711.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:51.668Z,1492140711.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:52.020Z,1492140712.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:52.430Z,1492140712.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:52.464Z,1492140712.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:52.918Z,1492140712.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:53.255Z,1492140713.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:53.260Z,1492140713.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:53.628Z,1492140713.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:53.664Z,1492140713.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:54.038Z,1492140714.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:54.429Z,1492140714.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:54.460Z,1492140714.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:54.834Z,1492140714.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:55.242Z,1492140715.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:55.256Z,1492140715.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:55.650Z,1492140715.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:55.660Z,1492140715.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:56.020Z,1492140716.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:56.422Z,1492140716.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:56.456Z,1492140716.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:56.830Z,1492140716.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:57.252Z,1492140717.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:57.309Z,1492140717.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:57.630Z,1492140717.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:57.676Z,1492140717.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:58.034Z,1492140718.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:58.472Z,1492140718.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:58.491Z,1492140718.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:58.855Z,1492140718.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:59.268Z,1492140719.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:31:59.271Z,1492140719.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:59.627Z,1492140719.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:31:59.673Z,1492140719.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:00.034Z,1492140720.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:00.434Z,1492140720.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:00.468Z,1492140720.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:00.897Z,1492140720.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:01.247Z,1492140721.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:01.264Z,1492140721.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:01.626Z,1492140721.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:01.672Z,1492140721.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:02.061Z,1492140722.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:02.468Z,1492140722.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:02.494Z,1492140722.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:02.902Z,1492140722.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:03.264Z,1492140723.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:03.282Z,1492140723.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:03.647Z,1492140723.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:03.668Z,1492140723.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:04.066Z,1492140724.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:04.455Z,1492140724.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:04.465Z,1492140724.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:04.921Z,1492140724.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:05.249Z,1492140725.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:05.260Z,1492140725.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:05.638Z,1492140725.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:05.664Z,1492140725.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:06.031Z,1492140726.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:06.445Z,1492140726.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:06.468Z,1492140726.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:06.914Z,1492140726.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:07.244Z,1492140727.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:07.264Z,1492140727.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:07.645Z,1492140727.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:07.668Z,1492140727.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:08.037Z,1492140728.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:08.438Z,1492140728.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:08.464Z,1492140728.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:09.008Z,1492140729.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:09.261Z,1492140729.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:09.290Z,1492140729.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:09.668Z,1492140729.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:09.678Z,1492140729.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:10.055Z,1492140730.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:10.473Z,1492140730.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:10.516Z,1492140730.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:10.697Z,1492140730.697 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T03:32:10.909Z,1492140730.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:11.266Z,1492140731.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:11.268Z,1492140731.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:11.681Z,1492140731.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:11.728Z,1492140731.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:12.101Z,1492140732.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:12.497Z,1492140732.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:12.524Z,1492140732.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:12.874Z,1492140732.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:13.324Z,1492140733.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:13.341Z,1492140733.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:13.649Z,1492140733.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:13.728Z,1492140733.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:14.064Z,1492140734.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:14.433Z,1492140734.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:14.526Z,1492140734.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:14.954Z,1492140734.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:15.250Z,1492140735.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:15.329Z,1492140735.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:15.634Z,1492140735.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:15.736Z,1492140735.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:16.108Z,1492140736.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:16.520Z,1492140736.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:16.545Z,1492140736.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:16.906Z,1492140736.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:17.274Z,1492140737.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:17.292Z,1492140737.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:17.684Z,1492140737.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:18.088Z,1492140738.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:18.113Z,1492140738.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:18.501Z,1492140738.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:18.884Z,1492140738.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:18.916Z,1492140738.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:19.245Z,1492140739.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:19.300Z,1492140739.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:19.692Z,1492140739.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:20.044Z,1492140740.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:20.096Z,1492140740.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:20.450Z,1492140740.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:20.892Z,1492140740.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:20.903Z,1492140740.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:21.253Z,1492140741.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:21.300Z,1492140741.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:21.621Z,1492140741.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:22.092Z,1492140742.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:22.116Z,1492140742.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:22.446Z,1492140742.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:22.900Z,1492140742.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:22.912Z,1492140742.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:23.253Z,1492140743.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:23.348Z,1492140743.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:23.653Z,1492140743.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:24.062Z,1492140744.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:24.144Z,1492140744.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:24.430Z,1492140744.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:24.834Z,1492140744.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:24.940Z,1492140744.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:25.261Z,1492140745.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:25.584Z,1492140745.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:25.644Z,1492140745.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:26.054Z,1492140746.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:26.380Z,1492140746.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:26.447Z,1492140746.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:26.849Z,1492140746.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:27.191Z,1492140747.191 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:27.249Z,1492140747.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:27.620Z,1492140747.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:27.643Z,1492140747.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:28.050Z,1492140748.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:28.416Z,1492140748.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:28.457Z,1492140748.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:28.883Z,1492140748.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:29.212Z,1492140749.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:29.269Z,1492140749.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:29.617Z,1492140749.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:29.669Z,1492140749.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:30.043Z,1492140750.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:30.417Z,1492140750.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:30.442Z,1492140750.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:30.942Z,1492140750.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:31.221Z,1492140751.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:31.298Z,1492140751.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:31.626Z,1492140751.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:31.652Z,1492140751.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:32.066Z,1492140752.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:32.420Z,1492140752.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:32.457Z,1492140752.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:32.891Z,1492140752.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:33.216Z,1492140753.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:33.304Z,1492140753.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:33.628Z,1492140753.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:33.657Z,1492140753.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:34.060Z,1492140754.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:34.424Z,1492140754.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:34.485Z,1492140754.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:34.860Z,1492140754.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:35.220Z,1492140755.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:35.257Z,1492140755.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:35.624Z,1492140755.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:35.666Z,1492140755.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:36.043Z,1492140756.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:36.421Z,1492140756.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:36.436Z,1492140756.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:36.878Z,1492140756.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:37.216Z,1492140757.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:37.262Z,1492140757.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:37.622Z,1492140757.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:37.652Z,1492140757.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:38.034Z,1492140758.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:38.416Z,1492140758.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:38.447Z,1492140758.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:38.846Z,1492140758.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:39.212Z,1492140759.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:39.258Z,1492140759.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:39.617Z,1492140759.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:39.643Z,1492140759.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:40.037Z,1492140760.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:40.412Z,1492140760.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:41.209Z,1492140761.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:41.616Z,1492140761.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:42.412Z,1492140762.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:43.208Z,1492140763.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:43.549Z,1492140763.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:43.612Z,1492140763.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:43.684Z,1492140763.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:44.059Z,1492140764.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:44.409Z,1492140764.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:44.468Z,1492140764.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:44.867Z,1492140764.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:45.208Z,1492140765.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:45.306Z,1492140765.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:45.679Z,1492140765.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:46.005Z,1492140766.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:46.054Z,1492140766.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:46.471Z,1492140766.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:46.815Z,1492140766.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:46.885Z,1492140766.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:47.244Z,1492140767.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:47.260Z,1492140767.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:47.687Z,1492140767.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:48.040Z,1492140768.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:48.088Z,1492140768.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:48.473Z,1492140768.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:48.836Z,1492140768.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:48.882Z,1492140768.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:49.240Z,1492140769.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:49.273Z,1492140769.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:49.653Z,1492140769.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:50.036Z,1492140770.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:50.084Z,1492140770.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:50.526Z,1492140770.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:50.832Z,1492140770.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:50.931Z,1492140770.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:51.257Z,1492140771.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:51.312Z,1492140771.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:51.656Z,1492140771.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:52.060Z,1492140772.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:52.108Z,1492140772.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:52.458Z,1492140772.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:52.904Z,1492140772.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:52.924Z,1492140772.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:53.292Z,1492140773.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:53.644Z,1492140773.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:53.655Z,1492140773.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:54.090Z,1492140774.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:54.440Z,1492140774.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:54.458Z,1492140774.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:54.862Z,1492140774.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:55.236Z,1492140775.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:55.260Z,1492140775.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:55.640Z,1492140775.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:55.690Z,1492140775.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:56.066Z,1492140776.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:56.436Z,1492140776.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:56.459Z,1492140776.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:56.859Z,1492140776.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:57.189Z,1492140777.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:57.263Z,1492140777.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:57.666Z,1492140777.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:57.984Z,1492140777.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:58.063Z,1492140778.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:58.462Z,1492140778.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:58.782Z,1492140778.782 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:58.881Z,1492140778.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:59.192Z,1492140779.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:32:59.257Z,1492140779.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:59.711Z,1492140779.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:32:59.993Z,1492140779.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:00.061Z,1492140780.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:00.518Z,1492140780.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:00.788Z,1492140780.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:00.864Z,1492140780.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:01.192Z,1492140781.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:01.282Z,1492140781.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:01.662Z,1492140781.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:01.988Z,1492140781.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:02.078Z,1492140782.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:02.493Z,1492140782.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:02.784Z,1492140782.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:02.889Z,1492140782.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:03.190Z,1492140783.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:03.260Z,1492140783.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:03.661Z,1492140783.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:03.984Z,1492140783.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:04.054Z,1492140784.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:04.460Z,1492140784.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:04.785Z,1492140784.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:04.899Z,1492140784.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:05.254Z,1492140785.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:05.272Z,1492140785.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:05.661Z,1492140785.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:06.064Z,1492140786.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:06.068Z,1492140786.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:06.475Z,1492140786.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:06.864Z,1492140786.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:06.874Z,1492140786.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:07.252Z,1492140787.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:07.532Z,1492140787.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:07.654Z,1492140787.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:08.056Z,1492140788.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:08.328Z,1492140788.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:08.499Z,1492140788.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:08.858Z,1492140788.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:09.125Z,1492140789.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:09.263Z,1492140789.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:09.532Z,1492140789.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:09.696Z,1492140789.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:10.138Z,1492140790.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:10.328Z,1492140790.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:10.608Z,1492140790.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:10.945Z,1492140790.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:11.124Z,1492140791.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:11.300Z,1492140791.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:11.528Z,1492140791.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:11.711Z,1492140791.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:12.216Z,1492140792.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:12.324Z,1492140792.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:12.454Z,1492140792.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:12.917Z,1492140792.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:13.120Z,1492140793.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:13.275Z,1492140793.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:13.524Z,1492140793.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:13.662Z,1492140793.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:14.067Z,1492140794.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:14.328Z,1492140794.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:14.535Z,1492140794.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:14.888Z,1492140794.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:15.124Z,1492140795.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:15.270Z,1492140795.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:15.528Z,1492140795.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:15.669Z,1492140795.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:16.061Z,1492140796.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:16.324Z,1492140796.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:16.465Z,1492140796.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:16.879Z,1492140796.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:17.120Z,1492140797.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:17.262Z,1492140797.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:17.524Z,1492140797.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:17.659Z,1492140797.659 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:33:17.660Z,1492140797.659 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:33:17.660Z,1492140797.659 [BPC1](ERROR): Communications Fault
2017-04-14T03:33:17.698Z,1492140797.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:17.761Z,1492140797.761 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:33:18.090Z,1492140798.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:18.320Z,1492140798.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:18.453Z,1492140798.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:18.853Z,1492140798.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:18.909Z,1492140798.908 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:33:18.909Z,1492140798.909 [BPC1] No Fault, FailCount= 1
2017-04-14T03:33:19.118Z,1492140799.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:19.331Z,1492140799.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:19.524Z,1492140799.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:19.691Z,1492140799.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:20.052Z,1492140800.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:20.321Z,1492140800.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:20.484Z,1492140800.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:20.885Z,1492140800.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:21.125Z,1492140801.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:21.340Z,1492140801.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:21.534Z,1492140801.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:21.669Z,1492140801.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:22.064Z,1492140802.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:22.328Z,1492140802.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:22.499Z,1492140802.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:22.903Z,1492140802.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:23.124Z,1492140803.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:23.278Z,1492140803.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:23.528Z,1492140803.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:23.730Z,1492140803.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:24.133Z,1492140804.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:24.336Z,1492140804.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:24.461Z,1492140804.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:24.885Z,1492140804.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:25.132Z,1492140805.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:25.280Z,1492140805.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:25.536Z,1492140805.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:25.675Z,1492140805.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:26.078Z,1492140806.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:26.334Z,1492140806.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:26.470Z,1492140806.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:26.865Z,1492140806.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:27.128Z,1492140807.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:27.270Z,1492140807.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:27.533Z,1492140807.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:27.663Z,1492140807.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:28.070Z,1492140808.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:28.328Z,1492140808.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:28.473Z,1492140808.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:28.868Z,1492140808.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:29.124Z,1492140809.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:29.272Z,1492140809.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:29.529Z,1492140809.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:29.653Z,1492140809.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:30.058Z,1492140810.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:30.325Z,1492140810.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:30.494Z,1492140810.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:30.874Z,1492140810.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:31.126Z,1492140811.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:31.269Z,1492140811.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:31.532Z,1492140811.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:31.661Z,1492140811.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:32.086Z,1492140812.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:32.329Z,1492140812.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:32.460Z,1492140812.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:32.910Z,1492140812.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:33.124Z,1492140813.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:33.296Z,1492140813.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:33.528Z,1492140813.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:33.666Z,1492140813.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:34.057Z,1492140814.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:34.074Z,1492140814.074 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T03:33:34.074Z,1492140814.074 [Default:CheckIn:C.Wait] Stopped
2017-04-14T03:33:34.074Z,1492140814.074 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T03:33:34.075Z,1492140814.075 [Default:CheckIn:D] Running Loop=1
2017-04-14T03:33:34.324Z,1492140814.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:34.465Z,1492140814.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:34.475Z,1492140814.475 [Default:CheckIn:D] Stopped
2017-04-14T03:33:34.475Z,1492140814.475 [Default:CheckIn:E] Running Loop=1
2017-04-14T03:33:34.867Z,1492140814.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:34.867Z,1492140814.867 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T03:33:34.867Z,1492140814.867 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:33:34.874Z,1492140814.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:34.874Z,1492140814.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T03:33:34.874Z,1492140814.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:33:34.878Z,1492140814.878 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 7.485906 min 
2017-04-14T03:33:34.880Z,1492140814.880 [Default:CheckIn:E] Stopped
2017-04-14T03:33:34.880Z,1492140814.880 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn] Stopped
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn](INFO): Running loop #2
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn] Running Loop=2
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T03:33:34.881Z,1492140814.881 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T03:33:34.892Z,1492140814.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:33:34.892Z,1492140814.892 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:33:35.120Z,1492140815.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:35.302Z,1492140815.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:33:35.303Z,1492140815.303 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T03:33:35.303Z,1492140815.303 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:33:35.304Z,1492140815.304 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T03:33:35.525Z,1492140815.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:35.624Z,1492140815.624 [NAL9602](INFO): Powering up
2017-04-14T03:33:35.684Z,1492140815.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:33:35.685Z,1492140815.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:33:35.685Z,1492140815.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:33:35.690Z,1492140815.690 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:33:35.690Z,1492140815.690 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:33:35.691Z,1492140815.691 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:33:36.054Z,1492140816.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:36.320Z,1492140816.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:36.449Z,1492140816.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:36.851Z,1492140816.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:37.118Z,1492140817.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:37.259Z,1492140817.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:37.528Z,1492140817.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:37.653Z,1492140817.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:38.057Z,1492140818.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:38.327Z,1492140818.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:38.453Z,1492140818.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:38.858Z,1492140818.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:39.113Z,1492140819.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:39.264Z,1492140819.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:39.713Z,1492140819.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:39.908Z,1492140819.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:40.063Z,1492140820.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:40.714Z,1492140820.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:41.141Z,1492140821.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:41.936Z,1492140821.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:42.738Z,1492140822.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:43.181Z,1492140823.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:43.976Z,1492140823.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:44.772Z,1492140824.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:45.176Z,1492140825.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:45.199Z,1492140825.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:45.470Z,1492140825.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:45.783Z,1492140825.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:45.972Z,1492140825.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:46.231Z,1492140826.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:46.509Z,1492140826.509 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:33:46.568Z,1492140826.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:46.768Z,1492140826.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:47.011Z,1492140827.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:47.184Z,1492140827.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:47.412Z,1492140827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:47.768Z,1492140827.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:47.980Z,1492140827.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:48.172Z,1492140828.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:48.563Z,1492140828.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:48.776Z,1492140828.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:49.035Z,1492140829.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:49.373Z,1492140829.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:49.488Z,1492140829.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:49.771Z,1492140829.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:50.145Z,1492140830.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:50.284Z,1492140830.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:50.549Z,1492140830.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:50.949Z,1492140830.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:51.080Z,1492140831.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:51.368Z,1492140831.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:51.484Z,1492140831.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:51.758Z,1492140831.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:52.164Z,1492140832.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:52.281Z,1492140832.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:52.553Z,1492140832.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:52.961Z,1492140832.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:53.076Z,1492140833.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:53.368Z,1492140833.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:53.480Z,1492140833.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:53.761Z,1492140833.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:54.158Z,1492140834.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:54.276Z,1492140834.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:54.570Z,1492140834.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:54.957Z,1492140834.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:55.072Z,1492140835.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:55.359Z,1492140835.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:55.476Z,1492140835.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:55.758Z,1492140835.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:56.154Z,1492140836.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:56.272Z,1492140836.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:56.563Z,1492140836.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:56.946Z,1492140836.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:57.068Z,1492140837.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:57.359Z,1492140837.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:57.472Z,1492140837.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:57.784Z,1492140837.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:58.169Z,1492140838.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:58.268Z,1492140838.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:58.560Z,1492140838.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:58.955Z,1492140838.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:59.064Z,1492140839.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:59.427Z,1492140839.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:33:59.468Z,1492140839.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:33:59.758Z,1492140839.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:00.167Z,1492140840.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:00.264Z,1492140840.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:00.577Z,1492140840.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:00.960Z,1492140840.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:01.060Z,1492140841.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:01.375Z,1492140841.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:01.464Z,1492140841.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:01.785Z,1492140841.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:02.152Z,1492140842.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:02.260Z,1492140842.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:02.555Z,1492140842.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:03.049Z,1492140843.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:03.056Z,1492140843.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:03.362Z,1492140843.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:03.460Z,1492140843.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:03.762Z,1492140843.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:04.163Z,1492140844.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:04.256Z,1492140844.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:04.570Z,1492140844.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:05.019Z,1492140845.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:05.052Z,1492140845.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:05.376Z,1492140845.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:05.460Z,1492140845.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:05.758Z,1492140845.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:06.148Z,1492140846.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:06.256Z,1492140846.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:06.557Z,1492140846.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:06.978Z,1492140846.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:07.052Z,1492140847.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:07.361Z,1492140847.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:07.456Z,1492140847.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:07.766Z,1492140847.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:08.154Z,1492140848.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:08.252Z,1492140848.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:08.568Z,1492140848.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:08.969Z,1492140848.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:09.052Z,1492140849.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:09.383Z,1492140849.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:09.456Z,1492140849.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:09.772Z,1492140849.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:10.175Z,1492140850.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:10.252Z,1492140850.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:10.560Z,1492140850.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:10.970Z,1492140850.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:11.048Z,1492140851.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:11.389Z,1492140851.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:11.472Z,1492140851.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:11.757Z,1492140851.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:12.154Z,1492140852.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:12.273Z,1492140852.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:12.553Z,1492140852.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:12.985Z,1492140852.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:13.072Z,1492140853.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:13.350Z,1492140853.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:13.477Z,1492140853.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:13.778Z,1492140853.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:14.150Z,1492140854.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:14.272Z,1492140854.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:14.549Z,1492140854.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:14.952Z,1492140854.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:15.071Z,1492140855.071 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:15.357Z,1492140855.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:15.480Z,1492140855.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:15.756Z,1492140855.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:16.154Z,1492140856.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:16.276Z,1492140856.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:16.556Z,1492140856.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:17.037Z,1492140857.037 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:34:17.037Z,1492140857.037 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:34:17.037Z,1492140857.037 [BPC1](ERROR): Communications Fault
2017-04-14T03:34:17.072Z,1492140857.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:17.083Z,1492140857.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:17.106Z,1492140857.106 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:17.106Z,1492140857.106 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T03:34:17.107Z,1492140857.107 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:34:17.152Z,1492140857.152 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:34:17.152Z,1492140857.152 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:34:17.382Z,1492140857.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:17.401Z,1492140857.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:34:17.401Z,1492140857.401 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T03:34:17.500Z,1492140857.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:17.752Z,1492140857.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:17.758Z,1492140857.758 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:34:17.758Z,1492140857.758 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:34:17.758Z,1492140857.758 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:34:18.155Z,1492140858.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:18.198Z,1492140858.197 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:34:18.198Z,1492140858.198 [BPC1] No Fault, FailCount= 1
2017-04-14T03:34:18.296Z,1492140858.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:18.517Z,1492140858.517 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-04-14T03:34:19.035Z,1492140859.035 [NAL9602](FAULT): received: 
2017-04-14T03:34:19.035Z,1492140859.035 [NAL9602] Data Fault, FailCount= 1
2017-04-14T03:34:19.035Z,1492140859.035 [NAL9602](ERROR): Data Fault
2017-04-14T03:34:19.092Z,1492140859.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:19.154Z,1492140859.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:19.190Z,1492140859.190 [CBIT](ERROR): Data Fault in component: NAL9602
2017-04-14T03:34:19.237Z,1492140859.237 [NAL9602](INFO): Powering down
2017-04-14T03:34:19.301Z,1492140859.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:19.500Z,1492140859.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:19.665Z,1492140859.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:20.052Z,1492140860.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:20.071Z,1492140860.071 [CBIT](INFO): Clearing failed state for component NAL9602
2017-04-14T03:34:20.071Z,1492140860.071 [NAL9602] No Fault, FailCount= 1
2017-04-14T03:34:20.296Z,1492140860.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:20.454Z,1492140860.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:20.862Z,1492140860.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:21.064Z,1492140861.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:21.255Z,1492140861.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:21.698Z,1492140861.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:21.860Z,1492140861.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:22.062Z,1492140862.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:22.486Z,1492140862.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:22.656Z,1492140862.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:22.846Z,1492140862.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:23.076Z,1492140863.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:23.253Z,1492140863.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:23.677Z,1492140863.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:23.872Z,1492140863.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:24.071Z,1492140864.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:24.419Z,1492140864.419 [NAL9602](INFO): Powering up NAL9602
2017-04-14T03:34:24.451Z,1492140864.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:24.668Z,1492140864.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:24.854Z,1492140864.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:25.120Z,1492140865.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:25.253Z,1492140865.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:25.684Z,1492140865.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:25.916Z,1492140865.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:26.063Z,1492140866.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:26.464Z,1492140866.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:26.712Z,1492140866.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:26.847Z,1492140866.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:27.152Z,1492140867.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:27.260Z,1492140867.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:27.670Z,1492140867.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:27.948Z,1492140867.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:28.103Z,1492140868.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:28.462Z,1492140868.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:28.744Z,1492140868.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:28.898Z,1492140868.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:29.148Z,1492140869.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:29.265Z,1492140869.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:29.669Z,1492140869.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:29.945Z,1492140869.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:30.066Z,1492140870.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:30.464Z,1492140870.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:30.740Z,1492140870.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:30.866Z,1492140870.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:31.249Z,1492140871.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:31.400Z,1492140871.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:31.656Z,1492140871.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:32.058Z,1492140872.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:32.196Z,1492140872.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:32.457Z,1492140872.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:32.964Z,1492140872.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:32.992Z,1492140872.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:33.263Z,1492140873.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:33.421Z,1492140873.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:33.664Z,1492140873.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:34.064Z,1492140874.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:34.216Z,1492140874.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:34.465Z,1492140874.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:34.861Z,1492140874.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:35.012Z,1492140875.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:35.290Z,1492140875.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:35.416Z,1492140875.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:35.622Z,1492140875.622 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:34:35.670Z,1492140875.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:36.050Z,1492140876.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:36.212Z,1492140876.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:36.478Z,1492140876.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:36.882Z,1492140876.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:37.009Z,1492140877.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:37.286Z,1492140877.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:37.416Z,1492140877.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:37.646Z,1492140877.646 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:34:37.646Z,1492140877.646 [BPC1] Communications Fault, FailCount= 2
2017-04-14T03:34:37.646Z,1492140877.646 [BPC1](ERROR): Communications Fault
2017-04-14T03:34:37.655Z,1492140877.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:37.721Z,1492140877.721 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:34:38.057Z,1492140878.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:38.212Z,1492140878.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:38.460Z,1492140878.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:38.864Z,1492140878.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:38.904Z,1492140878.904 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:34:38.904Z,1492140878.904 [BPC1] No Fault, FailCount= 2
2017-04-14T03:34:39.008Z,1492140879.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:39.314Z,1492140879.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:39.412Z,1492140879.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:39.697Z,1492140879.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:40.061Z,1492140880.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:40.208Z,1492140880.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:40.462Z,1492140880.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:41.006Z,1492140881.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:41.413Z,1492140881.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:42.208Z,1492140882.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:43.014Z,1492140883.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:43.428Z,1492140883.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:44.232Z,1492140884.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:45.028Z,1492140885.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:45.153Z,1492140885.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:45.303Z,1492140885.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:45.432Z,1492140885.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:45.682Z,1492140885.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:46.021Z,1492140886.021 [DataOverHttps](IMPORTANT): SBD MTMSN=20170414T033446
2017-04-14T03:34:46.091Z,1492140886.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:46.228Z,1492140886.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:46.486Z,1492140886.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:46.946Z,1492140886.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:47.025Z,1492140887.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:47.432Z,1492140887.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:48.229Z,1492140888.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:49.017Z,1492140889.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:49.816Z,1492140889.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:50.348Z,1492140890.348 [NAL9602](INFO): SBD MO Status=0, MOMSN=2095, MT Status=0, MTMSN=0
2017-04-14T03:34:50.349Z,1492140890.349 [NAL9602](INFO): No messages in MT queue
2017-04-14T03:34:50.398Z,1492140890.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:50.487Z,1492140890.487 [DataOverHttps](INFO): Received command:ibit
2017-04-14T03:34:50.540Z,1492140890.540 [CommandLine](IMPORTANT): got command ibit
2017-04-14T03:34:50.603Z,1492140890.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:50.613Z,1492140890.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:50.673Z,1492140890.673 [IBIT](IMPORTANT): Beginning Initiated BIT
2017-04-14T03:34:50.673Z,1492140890.673 [IBIT](IMPORTANT): Beginning control surface checks.
2017-04-14T03:34:50.684Z,1492140890.684 [CBIT](IMPORTANT): Beginning ground fault scan
2017-04-14T03:34:50.998Z,1492140890.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:51.068Z,1492140891.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:51.312Z,1492140891.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:51.750Z,1492140891.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:51.864Z,1492140891.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:52.122Z,1492140892.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:52.619Z,1492140892.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:52.660Z,1492140892.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:52.938Z,1492140892.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:53.064Z,1492140893.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:53.317Z,1492140893.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:53.696Z,1492140893.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:53.860Z,1492140893.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:54.125Z,1492140894.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:54.590Z,1492140894.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:54.656Z,1492140894.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:54.905Z,1492140894.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:55.060Z,1492140895.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:55.298Z,1492140895.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:55.699Z,1492140895.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:55.856Z,1492140895.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:56.102Z,1492140896.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:56.501Z,1492140896.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:56.652Z,1492140896.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:56.942Z,1492140896.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:57.064Z,1492140897.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:57.307Z,1492140897.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:57.707Z,1492140897.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:57.860Z,1492140897.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:58.152Z,1492140898.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:58.529Z,1492140898.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:58.656Z,1492140898.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:58.967Z,1492140898.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:59.312Z,1492140899.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:34:59.417Z,1492140899.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:34:59.705Z,1492140899.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:00.118Z,1492140900.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:00.213Z,1492140900.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:00.526Z,1492140900.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:01.010Z,1492140901.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:01.023Z,1492140901.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:01.132Z,1492140901.132 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.134336
CHAN A1 (24V): 0.130385
CHAN A2 (12V): 0.001520
CHAN A3 (5V): 0.000330
CHAN B0 (3.3V): -0.000407
CHAN B1 (3.15aV): -0.001641
CHAN B2 (3.15bV): -0.001591
CHAN B3 (GND): -0.003047
OPEN: 0.003484
Full Scale Calc: 4.765 mA, -1.589 mA
2017-04-14T03:35:01.321Z,1492140901.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:01.420Z,1492140901.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:01.698Z,1492140901.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:02.149Z,1492140902.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:02.216Z,1492140902.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:02.638Z,1492140902.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:03.012Z,1492140903.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:03.018Z,1492140903.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:03.416Z,1492140903.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:03.459Z,1492140903.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:03.865Z,1492140903.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:04.216Z,1492140904.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:04.222Z,1492140904.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:04.739Z,1492140904.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:05.016Z,1492140905.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:05.047Z,1492140905.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:05.430Z,1492140905.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:05.478Z,1492140905.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:05.837Z,1492140905.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:06.216Z,1492140906.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:06.238Z,1492140906.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:06.668Z,1492140906.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:07.002Z,1492140907.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:07.036Z,1492140907.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:07.363Z,1492140907.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:07.440Z,1492140907.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:07.763Z,1492140907.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:08.172Z,1492140908.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:08.236Z,1492140908.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:08.704Z,1492140908.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:09.020Z,1492140909.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:09.032Z,1492140909.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:09.378Z,1492140909.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:09.436Z,1492140909.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:09.792Z,1492140909.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:10.178Z,1492140910.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:10.236Z,1492140910.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:10.636Z,1492140910.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:10.997Z,1492140910.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:11.032Z,1492140911.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:11.368Z,1492140911.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:11.440Z,1492140911.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:11.774Z,1492140911.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:12.202Z,1492140912.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:12.236Z,1492140912.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:12.574Z,1492140912.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:12.987Z,1492140912.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:13.032Z,1492140913.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:13.377Z,1492140913.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:13.436Z,1492140913.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:13.769Z,1492140913.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:14.176Z,1492140914.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:14.232Z,1492140914.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:14.580Z,1492140914.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:14.978Z,1492140914.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:15.030Z,1492140915.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:15.402Z,1492140915.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:15.436Z,1492140915.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:15.788Z,1492140915.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:16.197Z,1492140916.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:16.233Z,1492140916.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:16.604Z,1492140916.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:17.009Z,1492140917.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:17.030Z,1492140917.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:17.397Z,1492140917.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:17.436Z,1492140917.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:17.762Z,1492140917.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:18.232Z,1492140918.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:18.235Z,1492140918.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:18.651Z,1492140918.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:19.010Z,1492140919.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:19.034Z,1492140919.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:19.407Z,1492140919.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:19.448Z,1492140919.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:19.795Z,1492140919.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:20.222Z,1492140920.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:20.244Z,1492140920.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:20.654Z,1492140920.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:20.987Z,1492140920.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:21.044Z,1492140921.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:21.398Z,1492140921.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:21.448Z,1492140921.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:21.802Z,1492140921.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:22.231Z,1492140922.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:22.244Z,1492140922.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:22.656Z,1492140922.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:22.994Z,1492140922.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:23.040Z,1492140923.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:23.394Z,1492140923.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:23.444Z,1492140923.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:23.791Z,1492140923.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:24.189Z,1492140924.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:24.240Z,1492140924.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:24.600Z,1492140924.600 [NAL9602](INFO): GPS fix at 20170414T033524: (36.802394, -121.787148)
2017-04-14T03:35:25.010Z,1492140925.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:25.010Z,1492140925.010 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:35:25.010Z,1492140925.010 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:35:25.036Z,1492140925.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:25.065Z,1492140925.066 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:25.066Z,1492140925.066 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:35:25.066Z,1492140925.066 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:35:25.145Z,1492140925.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:25.145Z,1492140925.145 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:35:25.440Z,1492140925.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:25.452Z,1492140925.452 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:25.452Z,1492140925.452 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:35:25.453Z,1492140925.453 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:35:25.453Z,1492140925.453 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:35:25.780Z,1492140925.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:35:25.780Z,1492140925.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:25.781Z,1492140925.781 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:25.790Z,1492140925.790 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:35:25.800Z,1492140925.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:25.800Z,1492140925.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:26.182Z,1492140926.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:26.236Z,1492140926.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:26.583Z,1492140926.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:26.994Z,1492140926.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:27.032Z,1492140927.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:27.324Z,1492140927.325 [NAL9602](INFO): GPS fix at 20170414T033527: (36.802367, -121.787128)
2017-04-14T03:35:27.436Z,1492140927.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:27.783Z,1492140927.783 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:27.787Z,1492140927.787 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:35:27.787Z,1492140927.787 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:35:27.799Z,1492140927.799 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:27.799Z,1492140927.799 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:35:27.803Z,1492140927.803 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:35:27.842Z,1492140927.842 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:27.843Z,1492140927.843 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:35:28.232Z,1492140928.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:28.235Z,1492140928.235 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:28.235Z,1492140928.235 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:35:28.236Z,1492140928.236 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:35:28.236Z,1492140928.236 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:35:28.589Z,1492140928.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:35:28.589Z,1492140928.589 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:28.590Z,1492140928.589 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:28.598Z,1492140928.598 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:35:28.603Z,1492140928.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:28.604Z,1492140928.603 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:28.983Z,1492140928.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:29.028Z,1492140929.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:29.385Z,1492140929.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:29.432Z,1492140929.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:29.810Z,1492140929.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:30.210Z,1492140930.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:30.228Z,1492140930.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:30.553Z,1492140930.553 [NAL9602](INFO): GPS fix at 20170414T033530: (36.802360, -121.787122)
2017-04-14T03:35:30.964Z,1492140930.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:30.986Z,1492140930.986 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:30.987Z,1492140930.987 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:35:30.987Z,1492140930.987 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:35:31.002Z,1492140931.002 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:31.002Z,1492140931.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:35:31.002Z,1492140931.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:35:31.066Z,1492140931.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:31.066Z,1492140931.066 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:35:31.443Z,1492140931.443 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:31.443Z,1492140931.443 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:35:31.444Z,1492140931.444 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:35:31.444Z,1492140931.444 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:35:31.760Z,1492140931.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:31.779Z,1492140931.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:35:31.780Z,1492140931.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:31.780Z,1492140931.780 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:31.785Z,1492140931.785 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:35:31.786Z,1492140931.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:31.786Z,1492140931.786 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:32.187Z,1492140932.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:32.556Z,1492140932.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:32.621Z,1492140932.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:32.993Z,1492140932.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:32.996Z,1492140932.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:33.325Z,1492140933.325 [NAL9602](INFO): GPS fix at 20170414T033533: (36.802347, -121.787122)
2017-04-14T03:35:33.771Z,1492140933.770 [PNI_TCM](ERROR): CRC does not match. Expected:0x34875 got:0x9263
2017-04-14T03:35:33.792Z,1492140933.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:33.799Z,1492140933.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:33.799Z,1492140933.799 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:35:33.800Z,1492140933.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:35:33.807Z,1492140933.807 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:33.807Z,1492140933.807 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:35:33.807Z,1492140933.807 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:35:33.854Z,1492140933.854 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:33.854Z,1492140933.855 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:35:34.238Z,1492140934.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:34.238Z,1492140934.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:35:34.239Z,1492140934.239 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:35:34.239Z,1492140934.239 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:35:34.588Z,1492140934.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:34.602Z,1492140934.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:35:34.602Z,1492140934.602 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:34.603Z,1492140934.603 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:34.664Z,1492140934.664 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:35:34.665Z,1492140934.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:34.665Z,1492140934.665 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:35.064Z,1492140935.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:35.064Z,1492140935.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:35.407Z,1492140935.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:35.806Z,1492140935.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:35.860Z,1492140935.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:36.203Z,1492140936.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:36.524Z,1492140936.524 [NAL9602](INFO): GPS fix at 20170414T033536: (36.802350, -121.787125)
2017-04-14T03:35:36.656Z,1492140936.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:36.714Z,1492140936.714 [IBIT](IMPORTANT): Communications Status:
Fix Status: 1
Iridium Signal Strength: 5
Latitude: 36.802349 Longitude: -121.787125
2017-04-14T03:35:37.022Z,1492140937.022 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:37.023Z,1492140937.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:35:37.023Z,1492140937.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:35:37.060Z,1492140937.060 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:37.061Z,1492140937.061 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:35:37.061Z,1492140937.061 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:35:37.081Z,1492140937.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:37.103Z,1492140937.103 [IBIT](IMPORTANT): Battery Status:
Battery Charge (AH): 397.764008
Voltage: 16.339935
2017-04-14T03:35:37.104Z,1492140937.104 [IBIT](IMPORTANT): batteryCapacityThreshold: 5.000000 Ah
2017-04-14T03:35:37.104Z,1492140937.104 [IBIT](IMPORTANT): batteryVoltageThreshold: 13.500000 V
2017-04-14T03:35:37.111Z,1492140937.111 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:37.111Z,1492140937.111 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:35:37.398Z,1492140937.398 [IBIT](IMPORTANT): bitHumidityThreshold: 55.000000 %
2017-04-14T03:35:37.398Z,1492140937.398 [IBIT](IMPORTANT): bitPressureThreshold: 0.750000 psi
2017-04-14T03:35:37.398Z,1492140937.398 [IBIT](IMPORTANT): Pressure:12.366488 PSI
2017-04-14T03:35:37.403Z,1492140937.403 [IBIT](IMPORTANT): Humidity:22.884874 %
2017-04-14T03:35:37.406Z,1492140937.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:35:37.406Z,1492140937.406 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:35:37.407Z,1492140937.407 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:35:37.411Z,1492140937.411 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:35:37.777Z,1492140937.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:35:37.778Z,1492140937.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:37.778Z,1492140937.778 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:37.783Z,1492140937.783 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:35:37.784Z,1492140937.783 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:35:37.784Z,1492140937.784 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:35:37.794Z,1492140937.794 [IBIT](IMPORTANT): surfaceThreshold: 1.000000 m
2017-04-14T03:35:37.794Z,1492140937.794 [IBIT](IMPORTANT): buoyancyNeutral: 425.000000 cc
2017-04-14T03:35:37.794Z,1492140937.794 [IBIT](IMPORTANT): massDefault: 1.000000 cm
2017-04-14T03:35:37.795Z,1492140937.795 [IBIT](IMPORTANT): stopDepth: 112.000000 m
2017-04-14T03:35:37.795Z,1492140937.795 [IBIT](IMPORTANT): abortDepth: 130.000000 m
2017-04-14T03:35:37.795Z,1492140937.795 [IBIT](IMPORTANT): IBIT PASSED
2017-04-14T03:35:37.876Z,1492140937.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:38.362Z,1492140938.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:38.408Z,1492140938.408 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T03:35:38.408Z,1492140938.408 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T03:35:38.672Z,1492140938.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:38.678Z,1492140938.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:39.076Z,1492140939.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:39.686Z,1492140939.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:39.843Z,1492140939.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:39.872Z,1492140939.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:40.668Z,1492140940.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:41.412Z,1492140941.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:42.212Z,1492140942.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:43.008Z,1492140943.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:43.412Z,1492140943.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:44.208Z,1492140944.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:44.952Z,1492140944.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:45.717Z,1492140945.717 [NAL9602](INFO): Powering down
2017-04-14T03:35:45.748Z,1492140945.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:45.811Z,1492140945.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:45.916Z,1492140945.916 [DataOverHttps](INFO): Sending 228 bytes from file Logs/20170414T032153/Courier0008.lzma
2017-04-14T03:35:45.998Z,1492140945.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:46.320Z,1492140946.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:46.544Z,1492140946.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:46.670Z,1492140946.670 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0008.lzma.bak
2017-04-14T03:35:46.670Z,1492140946.670 [DataOverHttps](INFO): SBD MOMSN=4884884
2017-04-14T03:35:46.776Z,1492140946.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:46.948Z,1492140946.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:47.132Z,1492140947.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:47.558Z,1492140947.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:47.745Z,1492140947.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:48.540Z,1492140948.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:48.960Z,1492140948.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:49.756Z,1492140949.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:50.552Z,1492140950.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:50.956Z,1492140950.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:51.756Z,1492140951.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:52.109Z,1492140952.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:52.309Z,1492140952.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:52.556Z,1492140952.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:52.793Z,1492140952.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:53.036Z,1492140953.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:53.102Z,1492140953.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:53.502Z,1492140953.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:53.832Z,1492140953.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:53.903Z,1492140953.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:54.631Z,1492140954.631 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:55.264Z,1492140955.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:56.060Z,1492140956.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:56.857Z,1492140956.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:57.260Z,1492140957.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:57.698Z,1492140957.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:57.782Z,1492140957.782 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20170414T032153/Courier0012.lzma
2017-04-14T03:35:57.845Z,1492140957.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:58.056Z,1492140958.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:58.225Z,1492140958.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:58.573Z,1492140958.573 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0012.lzma.bak
2017-04-14T03:35:58.573Z,1492140958.573 [DataOverHttps](INFO): SBD MOMSN=4884887
2017-04-14T03:35:58.650Z,1492140958.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:58.852Z,1492140958.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:59.033Z,1492140959.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:35:59.256Z,1492140959.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:35:59.425Z,1492140959.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:00.055Z,1492140960.055 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:00.848Z,1492140960.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:01.252Z,1492140961.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:02.048Z,1492140962.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:02.844Z,1492140962.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:03.170Z,1492140963.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:03.248Z,1492140963.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:03.321Z,1492140963.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:03.670Z,1492140963.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:04.044Z,1492140964.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:04.121Z,1492140964.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:04.531Z,1492140964.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:04.848Z,1492140964.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:04.923Z,1492140964.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:05.252Z,1492140965.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:06.048Z,1492140966.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:06.844Z,1492140966.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:07.248Z,1492140967.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:08.044Z,1492140968.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:08.370Z,1492140968.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:08.455Z,1492140968.455 [DataOverHttps](INFO): Sending 925 bytes from file Logs/20170414T032153/Express0009.lzma
2017-04-14T03:36:08.553Z,1492140968.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:08.840Z,1492140968.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:08.938Z,1492140968.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:09.237Z,1492140969.237 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0009.lzma.bak
2017-04-14T03:36:09.238Z,1492140969.238 [DataOverHttps](INFO): SBD MOMSN=4884889
2017-04-14T03:36:09.244Z,1492140969.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:09.325Z,1492140969.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:09.722Z,1492140969.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:10.040Z,1492140970.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:10.091Z,1492140970.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:10.836Z,1492140970.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:11.261Z,1492140971.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:12.056Z,1492140972.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:12.852Z,1492140972.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:13.256Z,1492140973.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:14.052Z,1492140974.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:14.184Z,1492140974.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:14.326Z,1492140974.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:14.661Z,1492140974.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:14.848Z,1492140974.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:15.072Z,1492140975.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:15.252Z,1492140975.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:15.465Z,1492140975.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:15.866Z,1492140975.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:16.048Z,1492140976.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:16.269Z,1492140976.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:16.844Z,1492140976.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:17.248Z,1492140977.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:18.044Z,1492140978.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:18.841Z,1492140978.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:19.248Z,1492140979.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:20.044Z,1492140980.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:20.518Z,1492140980.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:20.651Z,1492140980.651 [DataOverHttps](INFO): Sending 52 bytes from file Logs/20170414T032153/Express0013.lzma
2017-04-14T03:36:20.757Z,1492140980.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:20.848Z,1492140980.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:21.138Z,1492140981.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:21.252Z,1492140981.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:21.425Z,1492140981.425 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0013.lzma.bak
2017-04-14T03:36:21.426Z,1492140981.425 [DataOverHttps](INFO): SBD MOMSN=4884920
2017-04-14T03:36:21.506Z,1492140981.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:21.953Z,1492140981.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:21.993Z,1492140981.993 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T03:36:21.993Z,1492140981.993 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T03:36:21.993Z,1492140981.993 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:36:22.048Z,1492140982.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:22.272Z,1492140982.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:22.844Z,1492140982.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:23.248Z,1492140983.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:24.044Z,1492140984.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:24.840Z,1492140984.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:25.244Z,1492140985.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:26.040Z,1492140986.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:26.094Z,1492140986.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:26.213Z,1492140986.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:26.599Z,1492140986.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:26.840Z,1492140986.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:26.978Z,1492140986.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:27.244Z,1492140987.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:27.412Z,1492140987.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:27.821Z,1492140987.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:28.040Z,1492140988.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:28.198Z,1492140988.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:28.587Z,1492140988.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:28.836Z,1492140988.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:28.998Z,1492140988.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:29.240Z,1492140989.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:29.380Z,1492140989.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:29.780Z,1492140989.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:30.036Z,1492140990.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:30.178Z,1492140990.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:30.560Z,1492140990.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:30.832Z,1492140990.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:30.974Z,1492140990.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:31.236Z,1492140991.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:31.419Z,1492140991.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:31.764Z,1492140991.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:32.032Z,1492140992.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:32.182Z,1492140992.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:32.586Z,1492140992.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:32.828Z,1492140992.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:32.990Z,1492140992.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:33.232Z,1492140993.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:33.392Z,1492140993.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:33.785Z,1492140993.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:34.028Z,1492140994.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:34.185Z,1492140994.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:34.592Z,1492140994.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:34.825Z,1492140994.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:34.986Z,1492140994.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:35.228Z,1492140995.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:35.396Z,1492140995.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:35.798Z,1492140995.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:36.024Z,1492140996.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:36.172Z,1492140996.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:36.578Z,1492140996.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:36.820Z,1492140996.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:37.013Z,1492140997.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:37.224Z,1492140997.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:37.387Z,1492140997.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:37.770Z,1492140997.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:38.021Z,1492140998.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:38.178Z,1492140998.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:38.587Z,1492140998.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:38.816Z,1492140998.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:38.994Z,1492140998.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:39.220Z,1492140999.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:39.384Z,1492140999.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:39.798Z,1492140999.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:40.016Z,1492141000.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:40.179Z,1492141000.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:40.621Z,1492141000.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:40.812Z,1492141000.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:41.029Z,1492141001.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:41.216Z,1492141001.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:41.384Z,1492141001.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:41.778Z,1492141001.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:42.012Z,1492141002.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:42.176Z,1492141002.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:42.576Z,1492141002.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:42.809Z,1492141002.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:42.970Z,1492141002.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:43.212Z,1492141003.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:43.368Z,1492141003.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:43.779Z,1492141003.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:44.008Z,1492141004.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:44.178Z,1492141004.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:44.575Z,1492141004.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:44.804Z,1492141004.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:44.978Z,1492141004.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:45.208Z,1492141005.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:45.380Z,1492141005.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:45.780Z,1492141005.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:46.004Z,1492141006.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:46.183Z,1492141006.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:46.580Z,1492141006.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:46.804Z,1492141006.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:47.006Z,1492141007.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:47.208Z,1492141007.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:47.403Z,1492141007.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:47.788Z,1492141007.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:48.004Z,1492141008.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:48.169Z,1492141008.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:48.594Z,1492141008.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:48.800Z,1492141008.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:48.995Z,1492141008.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:49.204Z,1492141009.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:49.365Z,1492141009.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:49.775Z,1492141009.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:49.000Z,1492141010.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:50.171Z,1492141010.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:50.574Z,1492141010.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:50.796Z,1492141010.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:50.999Z,1492141011.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:51.237Z,1492141011.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:51.399Z,1492141011.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:51.817Z,1492141011.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:52.033Z,1492141012.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:52.204Z,1492141012.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:52.613Z,1492141012.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:52.828Z,1492141012.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:53.030Z,1492141013.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:53.233Z,1492141013.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:53.438Z,1492141013.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:53.802Z,1492141013.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:54.028Z,1492141014.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:54.192Z,1492141014.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:54.620Z,1492141014.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:54.808Z,1492141014.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:54.994Z,1492141014.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:55.407Z,1492141015.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:55.605Z,1492141015.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:55.802Z,1492141015.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:56.175Z,1492141016.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:56.400Z,1492141016.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:56.578Z,1492141016.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:56.809Z,1492141016.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:56.975Z,1492141016.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:57.373Z,1492141017.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:57.604Z,1492141017.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:57.779Z,1492141017.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:58.171Z,1492141018.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:58.401Z,1492141018.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:58.570Z,1492141018.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:58.808Z,1492141018.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:58.972Z,1492141018.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:59.372Z,1492141019.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:36:59.605Z,1492141019.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:36:59.780Z,1492141019.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:00.174Z,1492141020.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:00.402Z,1492141020.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:00.577Z,1492141020.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:00.812Z,1492141020.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:00.977Z,1492141020.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:01.382Z,1492141021.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:01.609Z,1492141021.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:01.789Z,1492141021.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:02.181Z,1492141022.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:02.408Z,1492141022.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:02.581Z,1492141022.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:02.868Z,1492141022.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:02.980Z,1492141022.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:03.379Z,1492141023.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:03.664Z,1492141023.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:03.791Z,1492141023.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:04.197Z,1492141024.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:04.460Z,1492141024.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:04.598Z,1492141024.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:04.987Z,1492141024.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:05.172Z,1492141025.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:05.380Z,1492141025.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:05.766Z,1492141025.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:05.970Z,1492141025.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:06.185Z,1492141026.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:06.589Z,1492141026.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:06.764Z,1492141026.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:06.994Z,1492141026.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:07.168Z,1492141027.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:07.394Z,1492141027.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:07.821Z,1492141027.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:07.964Z,1492141027.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:08.187Z,1492141028.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:08.574Z,1492141028.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:08.760Z,1492141028.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:09.004Z,1492141029.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:09.164Z,1492141029.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:09.372Z,1492141029.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:09.818Z,1492141029.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:09.960Z,1492141029.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:10.213Z,1492141030.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:10.582Z,1492141030.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:10.760Z,1492141030.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:10.971Z,1492141030.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:11.164Z,1492141031.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:11.370Z,1492141031.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:11.776Z,1492141031.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:11.960Z,1492141031.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:12.177Z,1492141032.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:12.570Z,1492141032.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:12.756Z,1492141032.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:12.977Z,1492141032.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:13.160Z,1492141033.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:13.382Z,1492141033.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:13.777Z,1492141033.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:13.956Z,1492141033.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:14.169Z,1492141034.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:14.571Z,1492141034.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:14.752Z,1492141034.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:14.976Z,1492141034.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:15.156Z,1492141035.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:15.372Z,1492141035.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:15.778Z,1492141035.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:15.952Z,1492141035.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:16.172Z,1492141036.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:16.574Z,1492141036.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:16.750Z,1492141036.750 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:16.978Z,1492141036.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:17.156Z,1492141037.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:17.370Z,1492141037.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:17.822Z,1492141037.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:17.829Z,1492141037.829 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:17.829Z,1492141037.829 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:37:17.829Z,1492141037.829 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:37:17.893Z,1492141037.893 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:37:17.952Z,1492141037.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:18.178Z,1492141038.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:18.197Z,1492141038.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:37:18.197Z,1492141038.197 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:37:18.579Z,1492141038.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:18.585Z,1492141038.585 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:37:18.585Z,1492141038.585 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:37:18.585Z,1492141038.585 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:37:18.748Z,1492141038.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:18.970Z,1492141038.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:19.152Z,1492141039.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:19.401Z,1492141039.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:19.771Z,1492141039.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:19.948Z,1492141039.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:20.170Z,1492141040.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:20.614Z,1492141040.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:20.744Z,1492141040.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:20.997Z,1492141040.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:21.216Z,1492141041.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:21.370Z,1492141041.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:21.806Z,1492141041.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:22.012Z,1492141042.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:22.257Z,1492141042.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:22.622Z,1492141042.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:22.808Z,1492141042.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:23.212Z,1492141043.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:24.008Z,1492141044.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:24.808Z,1492141044.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:25.604Z,1492141045.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:26.400Z,1492141046.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:26.804Z,1492141046.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:27.364Z,1492141047.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:27.522Z,1492141047.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:27.600Z,1492141047.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:27.887Z,1492141047.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:28.396Z,1492141048.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:28.414Z,1492141048.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:28.733Z,1492141048.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:28.800Z,1492141048.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:29.128Z,1492141049.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:29.502Z,1492141049.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:29.596Z,1492141049.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:29.926Z,1492141049.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:30.289Z,1492141050.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:30.392Z,1492141050.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:30.710Z,1492141050.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:30.832Z,1492141050.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:31.085Z,1492141051.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:31.495Z,1492141051.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:31.628Z,1492141051.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:31.897Z,1492141051.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:32.328Z,1492141052.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:32.424Z,1492141052.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:32.740Z,1492141052.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:33.087Z,1492141053.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:33.140Z,1492141053.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:33.484Z,1492141053.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:33.898Z,1492141053.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:33.936Z,1492141053.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:34.309Z,1492141054.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:34.732Z,1492141054.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:34.758Z,1492141054.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:35.104Z,1492141055.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:35.176Z,1492141055.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:35.501Z,1492141055.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:35.925Z,1492141055.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:35.973Z,1492141055.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:36.390Z,1492141056.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:36.691Z,1492141056.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:36.768Z,1492141056.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:37.088Z,1492141057.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:37.172Z,1492141057.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:37.494Z,1492141057.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:37.895Z,1492141057.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:37.968Z,1492141057.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:38.388Z,1492141058.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:38.726Z,1492141058.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:38.764Z,1492141058.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:39.089Z,1492141059.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:39.169Z,1492141059.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:39.501Z,1492141059.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:39.929Z,1492141059.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:39.972Z,1492141059.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:40.375Z,1492141060.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:40.711Z,1492141060.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:40.770Z,1492141060.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:41.086Z,1492141061.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:41.176Z,1492141061.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:41.502Z,1492141061.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:41.951Z,1492141061.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:41.972Z,1492141061.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:42.389Z,1492141062.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:42.764Z,1492141062.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:42.768Z,1492141062.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:43.121Z,1492141063.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:43.172Z,1492141063.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:43.540Z,1492141063.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:43.892Z,1492141063.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:43.968Z,1492141063.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:44.400Z,1492141064.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:44.713Z,1492141064.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:44.764Z,1492141064.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:45.098Z,1492141065.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:45.168Z,1492141065.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:45.498Z,1492141065.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:45.885Z,1492141065.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:45.964Z,1492141065.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:46.307Z,1492141066.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:46.722Z,1492141066.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:46.760Z,1492141066.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:47.088Z,1492141067.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:47.164Z,1492141067.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:47.486Z,1492141067.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:47.883Z,1492141067.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:47.960Z,1492141067.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:48.290Z,1492141068.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:48.735Z,1492141068.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:48.757Z,1492141068.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:49.092Z,1492141069.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:49.164Z,1492141069.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:49.490Z,1492141069.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:49.894Z,1492141069.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:49.960Z,1492141069.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:50.412Z,1492141070.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:50.695Z,1492141070.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:50.756Z,1492141070.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:51.102Z,1492141071.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:51.160Z,1492141071.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:51.495Z,1492141071.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:51.903Z,1492141071.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:51.956Z,1492141071.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:52.389Z,1492141072.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:52.706Z,1492141072.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:52.752Z,1492141072.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:53.090Z,1492141073.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:53.156Z,1492141073.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:53.565Z,1492141073.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:53.901Z,1492141073.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:53.952Z,1492141073.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:54.441Z,1492141074.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:54.730Z,1492141074.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:54.748Z,1492141074.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:55.151Z,1492141075.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:55.152Z,1492141075.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:55.500Z,1492141075.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:55.909Z,1492141075.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:55.948Z,1492141075.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:56.397Z,1492141076.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:56.745Z,1492141076.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:56.767Z,1492141076.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:57.129Z,1492141077.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:57.152Z,1492141077.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:57.527Z,1492141077.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:57.885Z,1492141077.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:57.948Z,1492141077.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:58.370Z,1492141078.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:58.692Z,1492141078.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:58.744Z,1492141078.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:59.122Z,1492141079.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:59.148Z,1492141079.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:37:59.490Z,1492141079.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:59.900Z,1492141079.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:37:59.944Z,1492141079.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:00.295Z,1492141080.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:00.725Z,1492141080.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:00.740Z,1492141080.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:01.109Z,1492141081.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:01.144Z,1492141081.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:01.482Z,1492141081.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:01.878Z,1492141081.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:01.940Z,1492141081.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:02.281Z,1492141082.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:02.696Z,1492141082.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:02.736Z,1492141082.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:03.090Z,1492141083.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:03.140Z,1492141083.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:03.490Z,1492141083.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:03.885Z,1492141083.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:03.936Z,1492141083.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:04.365Z,1492141084.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:04.702Z,1492141084.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:04.733Z,1492141084.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:05.099Z,1492141085.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:05.136Z,1492141085.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:05.478Z,1492141085.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:05.879Z,1492141085.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:05.932Z,1492141085.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:06.360Z,1492141086.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:06.725Z,1492141086.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:06.728Z,1492141086.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:07.082Z,1492141087.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:07.132Z,1492141087.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:07.493Z,1492141087.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:07.888Z,1492141087.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:07.928Z,1492141087.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:08.339Z,1492141088.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:08.725Z,1492141088.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:08.728Z,1492141088.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:09.099Z,1492141089.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:09.128Z,1492141089.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:09.501Z,1492141089.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:09.885Z,1492141089.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:09.924Z,1492141089.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:10.366Z,1492141090.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:10.720Z,1492141090.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:10.746Z,1492141090.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:11.124Z,1492141091.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:11.141Z,1492141091.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:11.484Z,1492141091.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:11.899Z,1492141091.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:11.920Z,1492141091.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:12.467Z,1492141092.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:12.717Z,1492141092.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:12.744Z,1492141092.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:13.124Z,1492141093.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:13.130Z,1492141093.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:13.526Z,1492141093.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:13.892Z,1492141093.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:13.920Z,1492141093.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:14.294Z,1492141094.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:14.684Z,1492141094.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:14.716Z,1492141094.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:15.086Z,1492141095.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:15.120Z,1492141095.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:15.524Z,1492141095.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:15.888Z,1492141095.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:15.916Z,1492141095.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:16.282Z,1492141096.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:16.707Z,1492141096.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:16.714Z,1492141096.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:17.106Z,1492141097.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:17.120Z,1492141097.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:17.477Z,1492141097.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:17.876Z,1492141097.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:17.916Z,1492141097.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:18.349Z,1492141098.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:18.691Z,1492141098.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:18.700Z,1492141098.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:19.126Z,1492141099.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:19.487Z,1492141099.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:19.497Z,1492141099.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:19.899Z,1492141099.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:20.292Z,1492141100.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:20.349Z,1492141100.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:20.697Z,1492141100.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:20.748Z,1492141100.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:21.079Z,1492141101.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:21.508Z,1492141101.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:21.544Z,1492141101.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:21.910Z,1492141101.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:22.332Z,1492141102.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:22.348Z,1492141102.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:22.718Z,1492141102.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:22.752Z,1492141102.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:23.548Z,1492141103.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:24.346Z,1492141104.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:24.752Z,1492141104.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:25.548Z,1492141105.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:26.347Z,1492141106.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:26.549Z,1492141106.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:26.692Z,1492141106.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:26.756Z,1492141106.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:27.059Z,1492141107.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:27.489Z,1492141107.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:27.552Z,1492141107.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:27.845Z,1492141107.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:28.281Z,1492141108.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:28.348Z,1492141108.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:28.703Z,1492141108.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:29.049Z,1492141109.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:29.052Z,1492141109.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:29.454Z,1492141109.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:29.848Z,1492141109.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:29.860Z,1492141109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:30.257Z,1492141110.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:30.644Z,1492141110.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:30.665Z,1492141110.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:31.056Z,1492141111.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:31.074Z,1492141111.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:31.454Z,1492141111.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:31.852Z,1492141111.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:31.864Z,1492141111.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:32.322Z,1492141112.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:32.648Z,1492141112.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:32.683Z,1492141112.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:33.046Z,1492141113.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:33.053Z,1492141113.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:33.446Z,1492141113.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:33.848Z,1492141113.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:33.849Z,1492141113.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:34.319Z,1492141114.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:34.644Z,1492141114.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:34.668Z,1492141114.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:35.048Z,1492141115.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:35.066Z,1492141115.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:35.453Z,1492141115.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:35.844Z,1492141115.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:35.857Z,1492141115.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:36.314Z,1492141116.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:36.640Z,1492141116.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:36.698Z,1492141116.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:37.044Z,1492141117.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:37.063Z,1492141117.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:37.500Z,1492141117.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:37.840Z,1492141117.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:37.970Z,1492141117.970 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:37.971Z,1492141117.971 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T03:38:37.971Z,1492141117.971 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:38:38.016Z,1492141118.016 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:38.016Z,1492141118.016 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T03:38:38.017Z,1492141118.017 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:38:38.089Z,1492141118.089 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:38:38.089Z,1492141118.089 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:38:38.328Z,1492141118.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:38:38.328Z,1492141118.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T03:38:38.329Z,1492141118.329 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:38:38.329Z,1492141118.329 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T03:38:38.636Z,1492141118.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:38.673Z,1492141118.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:38:38.674Z,1492141118.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:38:38.674Z,1492141118.674 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:38:38.695Z,1492141118.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:38:38.696Z,1492141118.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:38:38.696Z,1492141118.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:38:39.040Z,1492141119.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:39.089Z,1492141119.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:39.456Z,1492141119.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:39.837Z,1492141119.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:39.862Z,1492141119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:40.290Z,1492141120.290 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T03:38:40.291Z,1492141120.291 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:38:40.291Z,1492141120.291 [BPC1](ERROR): Data Fault
2017-04-14T03:38:40.380Z,1492141120.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:40.437Z,1492141120.437 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:38:40.632Z,1492141120.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:40.685Z,1492141120.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:41.036Z,1492141121.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:41.069Z,1492141121.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:41.463Z,1492141121.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:41.540Z,1492141121.540 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:38:41.540Z,1492141121.540 [BPC1] No Fault, FailCount= 1
2017-04-14T03:38:41.832Z,1492141121.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:41.910Z,1492141121.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:42.305Z,1492141122.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:42.643Z,1492141122.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:42.659Z,1492141122.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:43.048Z,1492141123.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:43.074Z,1492141123.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:43.475Z,1492141123.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:43.845Z,1492141123.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:43.872Z,1492141123.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:44.272Z,1492141124.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:44.640Z,1492141124.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:44.682Z,1492141124.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:45.072Z,1492141125.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:45.221Z,1492141125.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:45.456Z,1492141125.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:45.868Z,1492141125.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:45.887Z,1492141125.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:46.294Z,1492141126.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:46.661Z,1492141126.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:46.664Z,1492141126.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:47.068Z,1492141127.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:47.071Z,1492141127.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:47.459Z,1492141127.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:47.857Z,1492141127.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:47.865Z,1492141127.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:48.308Z,1492141128.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:48.660Z,1492141128.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:48.663Z,1492141128.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:49.064Z,1492141129.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:49.066Z,1492141129.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:49.468Z,1492141129.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:49.860Z,1492141129.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:49.882Z,1492141129.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:50.292Z,1492141130.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:50.656Z,1492141130.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:50.672Z,1492141130.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:51.061Z,1492141131.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:51.081Z,1492141131.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:51.466Z,1492141131.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:51.860Z,1492141131.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:51.890Z,1492141131.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:52.342Z,1492141132.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:52.657Z,1492141132.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:52.687Z,1492141132.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:53.062Z,1492141133.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:53.064Z,1492141133.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:53.477Z,1492141133.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:53.870Z,1492141133.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:53.905Z,1492141133.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:54.431Z,1492141134.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:54.664Z,1492141134.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:54.694Z,1492141134.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:55.066Z,1492141135.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:55.068Z,1492141135.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:55.486Z,1492141135.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:55.864Z,1492141135.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:55.885Z,1492141135.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:56.283Z,1492141136.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:56.660Z,1492141136.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:56.690Z,1492141136.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:57.057Z,1492141137.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:57.064Z,1492141137.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:57.459Z,1492141137.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:57.860Z,1492141137.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:57.861Z,1492141137.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:58.261Z,1492141138.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:58.656Z,1492141138.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:58.658Z,1492141138.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:59.060Z,1492141139.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:59.064Z,1492141139.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:59.468Z,1492141139.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:38:59.856Z,1492141139.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:38:59.861Z,1492141139.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:00.284Z,1492141140.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:00.652Z,1492141140.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:00.668Z,1492141140.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:01.052Z,1492141141.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:01.056Z,1492141141.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:01.500Z,1492141141.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:01.852Z,1492141141.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:01.854Z,1492141141.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:02.269Z,1492141142.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:02.648Z,1492141142.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:02.662Z,1492141142.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:03.052Z,1492141143.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:03.071Z,1492141143.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:03.457Z,1492141143.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:03.848Z,1492141143.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:03.865Z,1492141143.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:04.317Z,1492141144.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:04.644Z,1492141144.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:04.670Z,1492141144.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:05.048Z,1492141145.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:05.069Z,1492141145.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:05.514Z,1492141145.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:05.844Z,1492141145.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:05.898Z,1492141145.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:06.285Z,1492141146.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:06.640Z,1492141146.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:06.652Z,1492141146.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:07.044Z,1492141147.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:07.061Z,1492141147.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:07.507Z,1492141147.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:07.840Z,1492141147.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:07.855Z,1492141147.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:08.343Z,1492141148.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:08.636Z,1492141148.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:08.707Z,1492141148.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:09.040Z,1492141149.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:09.121Z,1492141149.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:09.463Z,1492141149.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:09.836Z,1492141149.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:09.863Z,1492141149.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:10.320Z,1492141150.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:10.632Z,1492141150.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:10.697Z,1492141150.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:11.036Z,1492141151.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:11.078Z,1492141151.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:11.478Z,1492141151.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:11.832Z,1492141151.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:11.857Z,1492141151.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:12.289Z,1492141152.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:12.628Z,1492141152.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:12.699Z,1492141152.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:13.032Z,1492141153.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:13.072Z,1492141153.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:13.463Z,1492141153.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:13.828Z,1492141153.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:13.860Z,1492141153.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:14.262Z,1492141154.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:14.625Z,1492141154.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:14.670Z,1492141154.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:15.028Z,1492141155.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:15.067Z,1492141155.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:15.455Z,1492141155.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:15.825Z,1492141155.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:15.861Z,1492141155.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:16.266Z,1492141156.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:16.621Z,1492141156.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:16.664Z,1492141156.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:17.028Z,1492141157.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:17.051Z,1492141157.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:17.464Z,1492141157.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:17.824Z,1492141157.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:17.854Z,1492141157.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:18.261Z,1492141158.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:18.592Z,1492141158.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:18.661Z,1492141158.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:19.052Z,1492141159.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:19.388Z,1492141159.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:19.456Z,1492141159.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:19.906Z,1492141159.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:20.185Z,1492141160.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:20.274Z,1492141160.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:20.596Z,1492141160.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:20.710Z,1492141160.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:21.091Z,1492141161.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:21.394Z,1492141161.394 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:21.490Z,1492141161.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:21.918Z,1492141161.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:22.192Z,1492141162.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:22.359Z,1492141162.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:22.730Z,1492141162.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:22.832Z,1492141162.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:23.098Z,1492141163.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:23.628Z,1492141163.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:24.426Z,1492141164.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:24.956Z,1492141164.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:25.752Z,1492141165.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:26.548Z,1492141166.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:26.952Z,1492141166.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:27.029Z,1492141167.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:27.150Z,1492141167.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:27.531Z,1492141167.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:27.748Z,1492141167.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:27.959Z,1492141167.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:28.317Z,1492141168.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:28.544Z,1492141168.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:28.746Z,1492141168.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:28.948Z,1492141168.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:29.148Z,1492141169.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:29.518Z,1492141169.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:29.744Z,1492141169.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:29.925Z,1492141169.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:30.318Z,1492141170.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:30.540Z,1492141170.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:30.727Z,1492141170.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:30.944Z,1492141170.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:31.120Z,1492141171.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:31.514Z,1492141171.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:31.741Z,1492141171.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:31.917Z,1492141171.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:32.316Z,1492141172.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:32.536Z,1492141172.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:32.719Z,1492141172.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:32.940Z,1492141172.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:33.139Z,1492141173.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:33.511Z,1492141173.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:33.736Z,1492141173.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:33.921Z,1492141173.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:34.334Z,1492141174.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:34.532Z,1492141174.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:34.784Z,1492141174.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:34.936Z,1492141174.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:35.171Z,1492141175.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:35.580Z,1492141175.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:35.740Z,1492141175.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:35.991Z,1492141175.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:36.369Z,1492141176.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:36.536Z,1492141176.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:36.754Z,1492141176.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:36.940Z,1492141176.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:37.163Z,1492141177.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:37.554Z,1492141177.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:37.736Z,1492141177.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:37.956Z,1492141177.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:38.329Z,1492141178.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:38.532Z,1492141178.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:38.734Z,1492141178.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:38.936Z,1492141178.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:39.182Z,1492141179.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:39.580Z,1492141179.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:39.733Z,1492141179.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:39.908Z,1492141179.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:40.354Z,1492141180.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:40.528Z,1492141180.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:40.731Z,1492141180.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:40.973Z,1492141180.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:41.141Z,1492141181.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:41.574Z,1492141181.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:41.768Z,1492141181.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:41.919Z,1492141181.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:42.350Z,1492141182.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:42.552Z,1492141182.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:42.717Z,1492141182.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:43.167Z,1492141183.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:43.350Z,1492141183.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:43.552Z,1492141183.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:43.922Z,1492141183.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:44.144Z,1492141184.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:44.338Z,1492141184.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:44.580Z,1492141184.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:44.730Z,1492141184.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:45.122Z,1492141185.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:45.377Z,1492141185.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:45.522Z,1492141185.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:45.918Z,1492141185.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:46.172Z,1492141186.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:46.340Z,1492141186.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:46.580Z,1492141186.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:46.724Z,1492141186.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:47.123Z,1492141187.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:47.376Z,1492141187.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:47.526Z,1492141187.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:47.926Z,1492141187.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:48.172Z,1492141188.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:48.331Z,1492141188.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:48.576Z,1492141188.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:48.722Z,1492141188.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:49.122Z,1492141189.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:49.372Z,1492141189.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:49.511Z,1492141189.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:49.933Z,1492141189.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:50.171Z,1492141190.171 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:50.330Z,1492141190.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:50.604Z,1492141190.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:50.737Z,1492141190.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:51.134Z,1492141191.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:51.400Z,1492141191.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:51.513Z,1492141191.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:51.938Z,1492141191.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:52.196Z,1492141192.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:52.326Z,1492141192.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:52.720Z,1492141192.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:52.900Z,1492141192.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:53.121Z,1492141193.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:53.525Z,1492141193.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:53.696Z,1492141193.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:53.926Z,1492141193.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:54.318Z,1492141194.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:54.492Z,1492141194.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:54.720Z,1492141194.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:54.896Z,1492141194.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:55.133Z,1492141195.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:55.612Z,1492141195.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:55.692Z,1492141195.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:55.915Z,1492141195.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:56.350Z,1492141196.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:56.488Z,1492141196.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:56.728Z,1492141196.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:56.892Z,1492141196.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:57.150Z,1492141197.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:57.543Z,1492141197.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:57.688Z,1492141197.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:57.950Z,1492141197.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:58.330Z,1492141198.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:58.484Z,1492141198.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:58.733Z,1492141198.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:58.888Z,1492141198.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:59.133Z,1492141199.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:59.532Z,1492141199.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:39:59.684Z,1492141199.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:39:59.928Z,1492141199.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:00.312Z,1492141200.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:00.515Z,1492141200.515 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:00.724Z,1492141200.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:00.922Z,1492141200.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:01.122Z,1492141201.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:01.521Z,1492141201.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:01.716Z,1492141201.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:01.914Z,1492141201.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:02.357Z,1492141202.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:02.513Z,1492141202.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:02.725Z,1492141202.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:02.924Z,1492141202.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:03.121Z,1492141203.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:03.520Z,1492141203.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:03.721Z,1492141203.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:03.913Z,1492141203.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:04.317Z,1492141204.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:04.516Z,1492141204.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:04.731Z,1492141204.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:04.920Z,1492141204.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:05.120Z,1492141205.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:05.522Z,1492141205.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:05.716Z,1492141205.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:05.918Z,1492141205.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:06.325Z,1492141206.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:06.513Z,1492141206.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:06.743Z,1492141206.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:06.921Z,1492141206.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:07.130Z,1492141207.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:07.532Z,1492141207.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:07.716Z,1492141207.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:07.929Z,1492141207.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:08.335Z,1492141208.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:08.514Z,1492141208.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:08.728Z,1492141208.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:08.928Z,1492141208.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:09.122Z,1492141209.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:09.586Z,1492141209.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:09.725Z,1492141209.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:09.926Z,1492141209.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:10.366Z,1492141210.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:10.506Z,1492141210.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:10.730Z,1492141210.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:11.147Z,1492141211.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:11.300Z,1492141211.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:11.521Z,1492141211.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:11.962Z,1492141211.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:12.097Z,1492141212.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:12.338Z,1492141212.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:12.512Z,1492141212.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:12.717Z,1492141212.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:13.122Z,1492141213.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:13.309Z,1492141213.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:13.522Z,1492141213.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:13.920Z,1492141213.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:14.104Z,1492141214.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:14.318Z,1492141214.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:14.508Z,1492141214.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:14.716Z,1492141214.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:15.116Z,1492141215.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:15.304Z,1492141215.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:15.522Z,1492141215.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:15.922Z,1492141215.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:16.100Z,1492141216.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:16.322Z,1492141216.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:16.506Z,1492141216.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:16.726Z,1492141216.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:17.116Z,1492141217.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:17.300Z,1492141217.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:17.514Z,1492141217.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:17.916Z,1492141217.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:18.099Z,1492141218.099 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:18.322Z,1492141218.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:18.544Z,1492141218.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:18.726Z,1492141218.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:18.733Z,1492141218.733 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:18.733Z,1492141218.733 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T03:40:18.733Z,1492141218.733 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:40:18.767Z,1492141218.767 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:40:19.128Z,1492141219.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:19.163Z,1492141219.163 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:40:19.163Z,1492141219.163 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T03:40:19.340Z,1492141219.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:19.534Z,1492141219.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:19.540Z,1492141219.540 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:40:19.540Z,1492141219.540 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:40:19.541Z,1492141219.541 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:40:19.922Z,1492141219.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:20.136Z,1492141220.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:20.325Z,1492141220.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:20.717Z,1492141220.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:20.877Z,1492141220.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:21.116Z,1492141221.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:21.522Z,1492141221.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:21.672Z,1492141221.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:21.925Z,1492141221.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:22.322Z,1492141222.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:22.468Z,1492141222.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:22.725Z,1492141222.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:22.872Z,1492141222.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:23.123Z,1492141223.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:23.668Z,1492141223.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:24.464Z,1492141224.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:24.868Z,1492141224.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:25.664Z,1492141225.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:26.460Z,1492141226.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:26.864Z,1492141226.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:27.660Z,1492141227.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:27.853Z,1492141227.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:27.991Z,1492141227.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:28.398Z,1492141228.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:28.457Z,1492141228.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:28.769Z,1492141228.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:28.864Z,1492141228.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:29.201Z,1492141229.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:29.583Z,1492141229.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:29.660Z,1492141229.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:29.961Z,1492141229.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:30.350Z,1492141230.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:30.456Z,1492141230.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:30.768Z,1492141230.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:30.860Z,1492141230.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:31.170Z,1492141231.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:31.549Z,1492141231.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:31.657Z,1492141231.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:31.945Z,1492141231.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:32.378Z,1492141232.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:32.452Z,1492141232.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:32.780Z,1492141232.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:32.856Z,1492141232.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:33.154Z,1492141233.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:33.554Z,1492141233.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:33.652Z,1492141233.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:33.951Z,1492141233.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:34.448Z,1492141234.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:34.451Z,1492141234.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:34.757Z,1492141234.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:34.852Z,1492141234.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:35.156Z,1492141235.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:35.551Z,1492141235.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:35.648Z,1492141235.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:35.953Z,1492141235.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:36.444Z,1492141236.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:36.454Z,1492141236.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:36.759Z,1492141236.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:36.848Z,1492141236.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:37.170Z,1492141237.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:37.548Z,1492141237.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:37.644Z,1492141237.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:37.958Z,1492141237.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:38.359Z,1492141238.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:38.440Z,1492141238.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:38.764Z,1492141238.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:38.844Z,1492141238.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:39.186Z,1492141239.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:39.594Z,1492141239.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:39.640Z,1492141239.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:40.087Z,1492141240.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:40.379Z,1492141240.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:40.440Z,1492141240.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:40.783Z,1492141240.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:40.844Z,1492141240.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:41.176Z,1492141241.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:41.614Z,1492141241.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:41.644Z,1492141241.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:42.085Z,1492141242.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:42.397Z,1492141242.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:42.440Z,1492141242.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:42.799Z,1492141242.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:42.844Z,1492141242.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:43.190Z,1492141243.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:43.546Z,1492141243.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:43.640Z,1492141243.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:44.091Z,1492141244.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:44.411Z,1492141244.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:44.436Z,1492141244.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:44.805Z,1492141244.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:44.840Z,1492141244.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:45.186Z,1492141245.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:45.556Z,1492141245.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:45.636Z,1492141245.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:45.952Z,1492141245.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:46.353Z,1492141246.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:46.432Z,1492141246.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:46.753Z,1492141246.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:46.836Z,1492141246.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:47.161Z,1492141247.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:47.553Z,1492141247.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:47.632Z,1492141247.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:47.966Z,1492141247.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:48.429Z,1492141248.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:48.464Z,1492141248.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:48.786Z,1492141248.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:48.848Z,1492141248.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:49.176Z,1492141249.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:49.570Z,1492141249.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:49.644Z,1492141249.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:49.949Z,1492141249.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:50.443Z,1492141250.443 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:50.454Z,1492141250.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:50.758Z,1492141250.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:50.848Z,1492141250.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:51.155Z,1492141251.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:51.556Z,1492141251.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:51.646Z,1492141251.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:52.060Z,1492141252.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:52.366Z,1492141252.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:52.440Z,1492141252.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:52.766Z,1492141252.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:52.845Z,1492141252.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:53.163Z,1492141253.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:53.572Z,1492141253.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:53.641Z,1492141253.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:53.988Z,1492141253.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:54.366Z,1492141254.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:54.436Z,1492141254.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:54.774Z,1492141254.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:54.841Z,1492141254.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:55.210Z,1492141255.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:55.564Z,1492141255.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:55.636Z,1492141255.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:56.046Z,1492141256.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:56.372Z,1492141256.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:56.432Z,1492141256.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:56.836Z,1492141256.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:56.851Z,1492141256.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:57.154Z,1492141257.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:57.632Z,1492141257.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:57.658Z,1492141257.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:58.048Z,1492141258.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:58.401Z,1492141258.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:58.430Z,1492141258.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:58.793Z,1492141258.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:58.836Z,1492141258.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:40:59.164Z,1492141259.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:59.562Z,1492141259.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:40:59.641Z,1492141259.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:00.061Z,1492141260.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:00.363Z,1492141260.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:00.436Z,1492141260.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:00.816Z,1492141260.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:00.841Z,1492141260.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:01.183Z,1492141261.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:01.636Z,1492141261.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:01.640Z,1492141261.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:01.945Z,1492141261.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:02.421Z,1492141262.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:02.436Z,1492141262.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:02.799Z,1492141262.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:02.880Z,1492141262.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:03.162Z,1492141263.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:03.550Z,1492141263.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:03.676Z,1492141263.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:03.966Z,1492141263.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:04.462Z,1492141264.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:04.472Z,1492141264.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:04.756Z,1492141264.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:04.876Z,1492141264.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:05.170Z,1492141265.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:05.541Z,1492141265.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:05.672Z,1492141265.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:06.062Z,1492141266.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:06.354Z,1492141266.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:06.468Z,1492141266.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:06.773Z,1492141266.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:06.872Z,1492141266.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:07.152Z,1492141267.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:07.557Z,1492141267.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:07.668Z,1492141267.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:08.046Z,1492141268.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:08.356Z,1492141268.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:08.445Z,1492141268.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:08.761Z,1492141268.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:09.168Z,1492141269.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:09.240Z,1492141269.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:09.560Z,1492141269.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:10.018Z,1492141270.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:10.037Z,1492141270.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:10.354Z,1492141270.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:10.464Z,1492141270.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:10.778Z,1492141270.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:11.202Z,1492141271.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:11.260Z,1492141271.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:11.552Z,1492141271.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:12.037Z,1492141272.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:12.056Z,1492141272.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:12.386Z,1492141272.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:12.460Z,1492141272.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:12.767Z,1492141272.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:13.182Z,1492141273.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:13.256Z,1492141273.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:13.554Z,1492141273.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:14.052Z,1492141274.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:14.056Z,1492141274.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:14.354Z,1492141274.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:14.512Z,1492141274.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:14.755Z,1492141274.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:15.154Z,1492141275.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:15.308Z,1492141275.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:15.568Z,1492141275.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:15.957Z,1492141275.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:16.104Z,1492141276.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:16.413Z,1492141276.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:16.751Z,1492141276.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:16.780Z,1492141276.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:17.169Z,1492141277.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:17.560Z,1492141277.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:17.576Z,1492141277.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:17.971Z,1492141277.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:18.372Z,1492141278.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:18.389Z,1492141278.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:18.776Z,1492141278.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:18.784Z,1492141278.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:19.168Z,1492141279.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:19.553Z,1492141279.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:19.572Z,1492141279.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:20.098Z,1492141280.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:20.363Z,1492141280.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:20.392Z,1492141280.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:20.767Z,1492141280.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:20.800Z,1492141280.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:21.233Z,1492141281.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:21.596Z,1492141281.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:21.599Z,1492141281.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:22.073Z,1492141282.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:22.393Z,1492141282.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:22.411Z,1492141282.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:22.476Z,1492141282.476 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T03:41:22.477Z,1492141282.477 [Default:CheckIn:C.Wait] Stopped
2017-04-14T03:41:22.477Z,1492141282.477 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T03:41:22.477Z,1492141282.477 [Default:CheckIn:D] Running Loop=1
2017-04-14T03:41:22.747Z,1492141282.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:22.800Z,1492141282.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:22.841Z,1492141282.841 [Default:CheckIn:D] Stopped
2017-04-14T03:41:22.841Z,1492141282.841 [Default:CheckIn:E] Running Loop=1
2017-04-14T03:41:23.193Z,1492141283.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:23.251Z,1492141283.251 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 15.292038 min 
2017-04-14T03:41:23.251Z,1492141283.251 [Default:CheckIn:E] Stopped
2017-04-14T03:41:23.263Z,1492141283.263 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T03:41:23.263Z,1492141283.263 [Default:CheckIn] Stopped
2017-04-14T03:41:23.264Z,1492141283.263 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T03:41:23.264Z,1492141283.264 [Default:CheckIn](INFO): Running loop #3
2017-04-14T03:41:23.264Z,1492141283.264 [Default:CheckIn] Running Loop=3
2017-04-14T03:41:23.264Z,1492141283.264 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T03:41:23.264Z,1492141283.264 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T03:41:23.598Z,1492141283.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:24.392Z,1492141284.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:24.796Z,1492141284.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:25.592Z,1492141285.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:26.388Z,1492141286.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:26.793Z,1492141286.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:27.588Z,1492141287.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:28.241Z,1492141288.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:28.321Z,1492141288.321 [NAL9602](INFO): Powering up
2017-04-14T03:41:28.374Z,1492141288.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:28.384Z,1492141288.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:28.777Z,1492141288.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:28.788Z,1492141288.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:29.178Z,1492141289.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:29.540Z,1492141289.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:29.584Z,1492141289.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:29.980Z,1492141289.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:30.381Z,1492141290.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:30.396Z,1492141290.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:30.746Z,1492141290.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:30.792Z,1492141290.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:31.146Z,1492141291.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:31.539Z,1492141291.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:31.589Z,1492141291.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:31.948Z,1492141291.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:32.364Z,1492141292.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:32.384Z,1492141292.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:32.744Z,1492141292.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:32.788Z,1492141292.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:33.145Z,1492141293.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:33.550Z,1492141293.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:33.584Z,1492141293.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:34.045Z,1492141294.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:34.344Z,1492141294.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:34.381Z,1492141294.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:34.752Z,1492141294.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:34.786Z,1492141294.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:35.149Z,1492141295.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:35.549Z,1492141295.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:35.592Z,1492141295.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:36.026Z,1492141296.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:36.349Z,1492141296.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:36.388Z,1492141296.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:36.753Z,1492141296.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:36.792Z,1492141296.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:37.152Z,1492141297.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:37.519Z,1492141297.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:37.564Z,1492141297.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:37.591Z,1492141297.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:37.965Z,1492141297.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:38.016Z,1492141298.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:38.325Z,1492141298.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:38.341Z,1492141298.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:38.388Z,1492141298.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:38.722Z,1492141298.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:38.746Z,1492141298.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:38.746Z,1492141298.746 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T03:41:38.746Z,1492141298.746 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:41:38.772Z,1492141298.772 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:38.772Z,1492141298.772 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T03:41:38.772Z,1492141298.772 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:41:38.793Z,1492141298.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:38.817Z,1492141298.817 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:41:38.817Z,1492141298.817 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:41:39.132Z,1492141299.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:39.191Z,1492141299.191 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:41:39.191Z,1492141299.191 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T03:41:39.192Z,1492141299.192 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:41:39.192Z,1492141299.192 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T03:41:39.507Z,1492141299.507 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:41:39.534Z,1492141299.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:39.552Z,1492141299.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:41:39.553Z,1492141299.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:41:39.553Z,1492141299.553 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:41:39.558Z,1492141299.558 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:41:39.558Z,1492141299.558 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:41:39.558Z,1492141299.559 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:41:39.588Z,1492141299.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:40.007Z,1492141300.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:40.044Z,1492141300.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:40.332Z,1492141300.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:40.359Z,1492141300.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:40.384Z,1492141300.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:40.738Z,1492141300.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:40.762Z,1492141300.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:40.788Z,1492141300.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:41.142Z,1492141301.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:41.170Z,1492141301.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:41.527Z,1492141301.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:41.569Z,1492141301.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:41.584Z,1492141301.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:41.971Z,1492141301.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:42.042Z,1492141302.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:42.321Z,1492141302.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:42.361Z,1492141302.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:42.388Z,1492141302.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:42.718Z,1492141302.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:42.792Z,1492141302.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:42.826Z,1492141302.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:43.144Z,1492141303.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:43.185Z,1492141303.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:43.533Z,1492141303.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:43.589Z,1492141303.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:43.594Z,1492141303.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:43.962Z,1492141303.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:44.019Z,1492141304.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:44.326Z,1492141304.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:44.384Z,1492141304.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:44.391Z,1492141304.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:44.732Z,1492141304.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:44.782Z,1492141304.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:44.788Z,1492141304.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:45.135Z,1492141305.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:45.150Z,1492141305.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:45.563Z,1492141305.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:45.584Z,1492141305.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:45.599Z,1492141305.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:45.930Z,1492141305.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:45.971Z,1492141305.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:46.317Z,1492141306.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:46.364Z,1492141306.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:46.380Z,1492141306.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:46.725Z,1492141306.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:46.748Z,1492141306.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:46.785Z,1492141306.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:47.115Z,1492141307.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:47.150Z,1492141307.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:47.522Z,1492141307.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:47.549Z,1492141307.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:47.580Z,1492141307.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:47.963Z,1492141307.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:48.009Z,1492141308.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:48.316Z,1492141308.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:48.378Z,1492141308.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:48.412Z,1492141308.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:48.718Z,1492141308.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:48.788Z,1492141308.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:48.805Z,1492141308.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:49.121Z,1492141309.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:49.167Z,1492141309.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:49.584Z,1492141309.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:49.588Z,1492141309.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:49.673Z,1492141309.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:50.032Z,1492141310.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:50.101Z,1492141310.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:50.388Z,1492141310.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:50.393Z,1492141310.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:50.481Z,1492141310.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:50.767Z,1492141310.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:50.792Z,1492141310.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:50.839Z,1492141310.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:51.218Z,1492141311.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:51.304Z,1492141311.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:51.529Z,1492141311.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:51.588Z,1492141311.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:51.612Z,1492141311.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:51.968Z,1492141311.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:52.074Z,1492141312.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:52.328Z,1492141312.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:52.384Z,1492141312.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:52.394Z,1492141312.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:52.783Z,1492141312.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:52.796Z,1492141312.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:52.893Z,1492141312.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:53.189Z,1492141313.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:53.303Z,1492141313.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:53.542Z,1492141313.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:53.592Z,1492141313.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:53.671Z,1492141313.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:54.013Z,1492141314.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:54.082Z,1492141314.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:54.382Z,1492141314.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:54.388Z,1492141314.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:54.510Z,1492141314.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:54.730Z,1492141314.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:54.788Z,1492141314.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:54.796Z,1492141314.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:55.150Z,1492141315.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:55.203Z,1492141315.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:55.518Z,1492141315.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:55.600Z,1492141315.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:55.745Z,1492141315.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:56.032Z,1492141316.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:56.106Z,1492141316.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:56.408Z,1492141316.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:56.436Z,1492141316.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:56.584Z,1492141316.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:56.817Z,1492141316.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:56.900Z,1492141316.900 [NAL9602](INFO): SBD MO Status=0, MOMSN=2096, MT Status=0, MTMSN=0
2017-04-14T03:41:56.900Z,1492141316.900 [NAL9602](INFO): No messages in MT queue
2017-04-14T03:41:56.960Z,1492141316.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:57.129Z,1492141317.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:57.373Z,1492141317.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:57.446Z,1492141317.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:57.612Z,1492141317.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:57.730Z,1492141317.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:57.766Z,1492141317.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:58.133Z,1492141318.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:58.178Z,1492141318.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:58.408Z,1492141318.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:58.530Z,1492141318.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:58.586Z,1492141318.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:58.812Z,1492141318.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:58.957Z,1492141318.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:59.030Z,1492141319.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:59.356Z,1492141319.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:59.474Z,1492141319.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:41:59.608Z,1492141319.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:59.752Z,1492141319.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:41:59.794Z,1492141319.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:00.118Z,1492141320.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:00.134Z,1492141320.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:00.404Z,1492141320.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:00.547Z,1492141320.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:00.581Z,1492141320.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:00.808Z,1492141320.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:00.910Z,1492141320.910 [NAL9602](INFO): GPS fix at 20170414T034201: (36.802281, -121.787171)
2017-04-14T03:42:00.927Z,1492141320.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:00.976Z,1492141320.976 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T03:42:00.976Z,1492141320.976 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T03:42:01.373Z,1492141321.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:01.422Z,1492141321.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:01.422Z,1492141321.422 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:42:01.423Z,1492141321.422 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:42:01.433Z,1492141321.433 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:01.433Z,1492141321.433 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:42:01.433Z,1492141321.433 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:42:01.449Z,1492141321.449 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:42:01.449Z,1492141321.450 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:42:01.612Z,1492141321.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:02.097Z,1492141322.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:02.188Z,1492141322.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:42:02.188Z,1492141322.188 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:42:02.189Z,1492141322.189 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:42:02.189Z,1492141322.189 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:42:02.359Z,1492141322.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:02.387Z,1492141322.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:42:02.403Z,1492141322.403 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:42:02.404Z,1492141322.404 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:42:02.408Z,1492141322.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:02.417Z,1492141322.417 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:42:02.418Z,1492141322.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:42:02.418Z,1492141322.418 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:42:02.812Z,1492141322.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:03.608Z,1492141323.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:04.357Z,1492141324.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:05.153Z,1492141325.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:05.949Z,1492141325.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:06.073Z,1492141326.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:06.094Z,1492141326.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:06.172Z,1492141326.172 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0016.lzma
2017-04-14T03:42:06.196Z,1492141326.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:06.245Z,1492141326.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:06.368Z,1492141326.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:06.599Z,1492141326.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:06.634Z,1492141326.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:06.978Z,1492141326.977 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0016.lzma.bak
2017-04-14T03:42:06.978Z,1492141326.978 [DataOverHttps](INFO): SBD MOMSN=4884967
2017-04-14T03:42:07.001Z,1492141327.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:07.038Z,1492141327.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:07.164Z,1492141327.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:07.413Z,1492141327.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:07.440Z,1492141327.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:07.805Z,1492141327.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:07.838Z,1492141327.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:07.960Z,1492141327.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:08.372Z,1492141328.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:09.168Z,1492141329.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:09.964Z,1492141329.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:10.396Z,1492141330.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:11.192Z,1492141331.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:11.253Z,1492141331.253 [NAL9602](INFO): Powering down
2017-04-14T03:42:11.272Z,1492141331.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:11.369Z,1492141331.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:11.414Z,1492141331.414 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T03:42:11.469Z,1492141331.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:11.510Z,1492141331.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:11.852Z,1492141331.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:11.877Z,1492141331.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:11.988Z,1492141331.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:12.279Z,1492141332.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:12.361Z,1492141332.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:12.661Z,1492141332.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:12.677Z,1492141332.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:12.716Z,1492141332.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:13.065Z,1492141333.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:13.115Z,1492141333.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:13.513Z,1492141333.513 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:14.308Z,1492141334.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:14.712Z,1492141334.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:15.508Z,1492141335.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:16.304Z,1492141336.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:16.574Z,1492141336.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:16.619Z,1492141336.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:16.709Z,1492141336.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:16.715Z,1492141336.714 [DataOverHttps](INFO): Sending 119 bytes from file Logs/20170414T032153/Express0017.lzma
2017-04-14T03:42:16.735Z,1492141336.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:16.768Z,1492141336.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:17.081Z,1492141337.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:17.115Z,1492141337.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:17.459Z,1492141337.459 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0017.lzma.bak
2017-04-14T03:42:17.459Z,1492141337.459 [DataOverHttps](INFO): SBD MOMSN=4884971
2017-04-14T03:42:17.490Z,1492141337.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:17.533Z,1492141337.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:17.954Z,1492141337.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:17.983Z,1492141337.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:17.997Z,1492141337.997 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T03:42:17.997Z,1492141337.997 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T03:42:17.997Z,1492141337.997 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:42:18.282Z,1492141338.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:18.333Z,1492141338.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:21.725Z,1492141341.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:21.741Z,1492141341.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:21.910Z,1492141341.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:21.958Z,1492141341.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:22.201Z,1492141342.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:22.216Z,1492141342.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:22.601Z,1492141342.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:22.618Z,1492141342.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:22.999Z,1492141342.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:23.019Z,1492141343.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:23.402Z,1492141343.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:23.422Z,1492141343.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:23.801Z,1492141343.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:23.817Z,1492141343.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:24.193Z,1492141344.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:24.226Z,1492141344.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:24.601Z,1492141344.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:24.617Z,1492141344.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:25.001Z,1492141345.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:25.022Z,1492141345.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:25.402Z,1492141345.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:25.418Z,1492141345.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:25.796Z,1492141345.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:25.824Z,1492141345.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:26.268Z,1492141346.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:26.299Z,1492141346.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:26.597Z,1492141346.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:26.631Z,1492141346.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:26.993Z,1492141346.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:27.031Z,1492141347.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:27.394Z,1492141347.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:27.421Z,1492141347.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:27.794Z,1492141347.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:27.810Z,1492141347.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:28.255Z,1492141348.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:28.331Z,1492141348.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:28.602Z,1492141348.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:28.622Z,1492141348.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:29.003Z,1492141349.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:29.066Z,1492141349.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:29.393Z,1492141349.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:29.465Z,1492141349.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:29.801Z,1492141349.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:29.966Z,1492141349.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:30.252Z,1492141350.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:30.290Z,1492141350.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:30.595Z,1492141350.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:30.668Z,1492141350.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:30.994Z,1492141350.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:31.072Z,1492141351.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:31.399Z,1492141351.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:31.415Z,1492141351.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:31.799Z,1492141351.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:31.932Z,1492141351.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:32.228Z,1492141352.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:32.250Z,1492141352.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:32.649Z,1492141352.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:32.673Z,1492141352.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:32.993Z,1492141352.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:33.029Z,1492141353.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:33.390Z,1492141353.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:33.418Z,1492141353.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:33.795Z,1492141353.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:33.914Z,1492141353.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:34.201Z,1492141354.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:34.216Z,1492141354.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:34.602Z,1492141354.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:34.753Z,1492141354.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:35.009Z,1492141355.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:35.057Z,1492141355.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:35.413Z,1492141355.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:35.540Z,1492141355.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:35.971Z,1492141355.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:36.064Z,1492141356.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:36.235Z,1492141356.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:36.299Z,1492141356.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:36.624Z,1492141356.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:36.673Z,1492141356.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:37.215Z,1492141357.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:37.255Z,1492141357.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:37.521Z,1492141357.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:37.602Z,1492141357.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:37.950Z,1492141357.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:38.002Z,1492141358.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:38.311Z,1492141358.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:38.404Z,1492141358.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:38.757Z,1492141358.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:38.902Z,1492141358.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:39.083Z,1492141359.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:39.183Z,1492141359.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:39.465Z,1492141359.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:39.541Z,1492141359.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:39.872Z,1492141359.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:39.924Z,1492141359.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:40.266Z,1492141360.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:40.329Z,1492141360.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:40.668Z,1492141360.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:40.708Z,1492141360.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:41.071Z,1492141361.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:41.178Z,1492141361.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:41.465Z,1492141361.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:41.513Z,1492141361.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:41.927Z,1492141361.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:41.957Z,1492141361.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:42.273Z,1492141362.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:42.314Z,1492141362.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:42.684Z,1492141362.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:42.722Z,1492141362.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:43.075Z,1492141363.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:43.204Z,1492141363.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:43.492Z,1492141363.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:43.499Z,1492141363.499 [PNI_TCM](ERROR): CRC does not match. Expected:0x34557 got:0x16384
2017-04-14T03:42:43.540Z,1492141363.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:43.915Z,1492141363.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:43.962Z,1492141363.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:44.273Z,1492141364.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:44.314Z,1492141364.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:44.677Z,1492141364.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:44.702Z,1492141364.702 [PNI_TCM](ERROR): CRC does not match. Expected:0x63233 got:0x49450
2017-04-14T03:42:44.757Z,1492141364.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:45.065Z,1492141365.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:45.119Z,1492141365.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:45.469Z,1492141365.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:45.511Z,1492141365.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:45.883Z,1492141365.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:45.927Z,1492141365.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:46.265Z,1492141366.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:46.303Z,1492141366.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:46.678Z,1492141366.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:46.694Z,1492141366.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:47.090Z,1492141367.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:47.115Z,1492141367.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:47.472Z,1492141367.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:47.500Z,1492141367.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:47.889Z,1492141367.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:47.906Z,1492141367.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:48.285Z,1492141368.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:48.312Z,1492141368.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:48.685Z,1492141368.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:48.706Z,1492141368.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:49.065Z,1492141369.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:49.102Z,1492141369.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:49.465Z,1492141369.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:49.484Z,1492141369.484 [PNI_TCM](ERROR): CRC does not match. Expected:0x43200 got:0x6336
2017-04-14T03:42:49.514Z,1492141369.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:49.873Z,1492141369.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:49.915Z,1492141369.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:50.273Z,1492141370.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:50.300Z,1492141370.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:50.677Z,1492141370.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:50.715Z,1492141370.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:51.074Z,1492141371.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:51.101Z,1492141371.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:51.471Z,1492141371.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:51.498Z,1492141371.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:51.917Z,1492141371.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:51.977Z,1492141371.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:52.273Z,1492141372.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:52.326Z,1492141372.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:52.682Z,1492141372.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:52.688Z,1492141372.688 [PNI_TCM](ERROR): CRC does not match. Expected:0x38999 got:0x106
2017-04-14T03:42:52.722Z,1492141372.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:53.082Z,1492141373.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:53.102Z,1492141373.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:53.477Z,1492141373.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:53.498Z,1492141373.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:53.882Z,1492141373.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:53.899Z,1492141373.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:54.282Z,1492141374.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:54.301Z,1492141374.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:54.687Z,1492141374.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:54.704Z,1492141374.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:55.069Z,1492141375.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:55.098Z,1492141375.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:55.465Z,1492141375.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:55.510Z,1492141375.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:55.868Z,1492141375.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:55.877Z,1492141375.878 [PNI_TCM](ERROR): CRC does not match. Expected:0x31580 got:0x17576
2017-04-14T03:42:55.908Z,1492141375.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:56.271Z,1492141376.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:56.310Z,1492141376.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:56.684Z,1492141376.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:56.728Z,1492141376.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:57.076Z,1492141377.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:57.102Z,1492141377.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:57.479Z,1492141377.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:57.557Z,1492141377.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:57.871Z,1492141377.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:57.916Z,1492141377.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:58.279Z,1492141378.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:58.327Z,1492141378.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:58.665Z,1492141378.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:58.711Z,1492141378.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:59.076Z,1492141379.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:59.121Z,1492141379.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:59.488Z,1492141379.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:59.525Z,1492141379.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:42:59.876Z,1492141379.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:42:59.938Z,1492141379.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:00.280Z,1492141380.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:00.291Z,1492141380.291 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:43:00.291Z,1492141380.291 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:43:00.291Z,1492141380.291 [BPC1](ERROR): Communications Fault
2017-04-14T03:43:00.300Z,1492141380.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:00.374Z,1492141380.374 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:43:00.684Z,1492141380.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:00.701Z,1492141380.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:01.069Z,1492141381.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:01.108Z,1492141381.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:01.467Z,1492141381.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:01.495Z,1492141381.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:01.544Z,1492141381.543 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:43:01.544Z,1492141381.543 [BPC1] No Fault, FailCount= 1
2017-04-14T03:43:01.894Z,1492141381.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:01.982Z,1492141381.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:02.282Z,1492141382.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:02.299Z,1492141382.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:02.676Z,1492141382.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:02.734Z,1492141382.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:03.078Z,1492141383.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:03.093Z,1492141383.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:03.477Z,1492141383.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:03.506Z,1492141383.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:03.886Z,1492141383.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:03.908Z,1492141383.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:04.281Z,1492141384.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:04.297Z,1492141384.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:04.681Z,1492141384.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:04.697Z,1492141384.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:05.069Z,1492141385.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:05.096Z,1492141385.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:05.480Z,1492141385.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:05.502Z,1492141385.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:05.915Z,1492141385.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:05.970Z,1492141385.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:06.265Z,1492141386.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:06.281Z,1492141386.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:06.669Z,1492141386.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:06.684Z,1492141386.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:07.077Z,1492141387.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:07.113Z,1492141387.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:07.470Z,1492141387.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:07.486Z,1492141387.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:07.893Z,1492141387.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:07.959Z,1492141387.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:08.275Z,1492141388.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:08.322Z,1492141388.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:08.667Z,1492141388.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:08.700Z,1492141388.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:09.065Z,1492141389.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:09.083Z,1492141389.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:09.490Z,1492141389.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:09.524Z,1492141389.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:09.902Z,1492141389.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:09.918Z,1492141389.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:10.338Z,1492141390.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:10.426Z,1492141390.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:10.712Z,1492141390.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:10.805Z,1492141390.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:11.086Z,1492141391.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:11.135Z,1492141391.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:11.481Z,1492141391.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:11.529Z,1492141391.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:11.879Z,1492141391.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:11.964Z,1492141391.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:12.272Z,1492141392.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:12.353Z,1492141392.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:12.672Z,1492141392.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:12.757Z,1492141392.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:13.069Z,1492141393.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:13.096Z,1492141393.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:13.469Z,1492141393.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:13.561Z,1492141393.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:13.875Z,1492141393.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:13.898Z,1492141393.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:14.276Z,1492141394.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:14.300Z,1492141394.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:14.679Z,1492141394.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:14.776Z,1492141394.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:15.086Z,1492141395.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:15.190Z,1492141395.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:15.489Z,1492141395.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:15.581Z,1492141395.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:15.956Z,1492141395.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:16.057Z,1492141396.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:16.321Z,1492141396.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:16.414Z,1492141396.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:16.715Z,1492141396.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:16.795Z,1492141396.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:17.138Z,1492141397.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:17.200Z,1492141397.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:17.511Z,1492141397.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:17.601Z,1492141397.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:17.907Z,1492141397.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:17.959Z,1492141397.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:18.303Z,1492141398.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:18.332Z,1492141398.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:18.720Z,1492141398.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:18.738Z,1492141398.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:23.663Z,1492141403.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:23.679Z,1492141403.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:23.687Z,1492141403.687 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:23.687Z,1492141403.687 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:43:23.687Z,1492141403.687 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:43:23.723Z,1492141403.723 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:43:23.789Z,1492141403.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:23.832Z,1492141403.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:23.867Z,1492141403.867 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:43:23.867Z,1492141403.867 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:43:24.163Z,1492141404.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:24.237Z,1492141404.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:24.252Z,1492141404.252 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:43:24.252Z,1492141404.252 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:43:24.253Z,1492141404.253 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:43:24.565Z,1492141404.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:24.594Z,1492141404.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:24.957Z,1492141404.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:24.994Z,1492141404.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:25.357Z,1492141405.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:25.394Z,1492141405.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:25.819Z,1492141405.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:25.899Z,1492141405.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:26.161Z,1492141406.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:26.229Z,1492141406.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:26.561Z,1492141406.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:26.662Z,1492141406.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:26.965Z,1492141406.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:27.015Z,1492141407.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:27.369Z,1492141407.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:27.404Z,1492141407.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:27.833Z,1492141407.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:27.882Z,1492141407.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:28.164Z,1492141408.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:28.247Z,1492141408.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:28.559Z,1492141408.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:28.626Z,1492141408.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:28.961Z,1492141408.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:28.997Z,1492141408.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:29.367Z,1492141409.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:29.406Z,1492141409.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:29.869Z,1492141409.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:29.917Z,1492141409.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:30.213Z,1492141410.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:30.306Z,1492141410.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:30.569Z,1492141410.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:30.626Z,1492141410.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:31.023Z,1492141411.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:31.074Z,1492141411.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:31.401Z,1492141411.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:31.452Z,1492141411.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:31.862Z,1492141411.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:31.907Z,1492141411.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:32.178Z,1492141412.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:32.276Z,1492141412.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:32.568Z,1492141412.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:32.676Z,1492141412.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:32.984Z,1492141412.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:33.086Z,1492141413.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:33.420Z,1492141413.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:33.470Z,1492141413.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:33.841Z,1492141413.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:33.901Z,1492141413.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:34.187Z,1492141414.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:34.272Z,1492141414.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:34.615Z,1492141414.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:34.622Z,1492141414.622 [PNI_TCM](ERROR): CRC does not match. Expected:0x13508 got:0x32516
2017-04-14T03:43:34.646Z,1492141414.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:34.962Z,1492141414.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:35.006Z,1492141415.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:35.364Z,1492141415.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:35.408Z,1492141415.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:35.765Z,1492141415.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:35.786Z,1492141415.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:36.166Z,1492141416.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:36.181Z,1492141416.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:36.557Z,1492141416.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:36.601Z,1492141416.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:36.969Z,1492141416.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:36.985Z,1492141416.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:37.377Z,1492141417.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:37.393Z,1492141417.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:37.813Z,1492141417.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:37.842Z,1492141417.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:38.157Z,1492141418.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:38.206Z,1492141418.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:38.569Z,1492141418.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:38.643Z,1492141418.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:38.966Z,1492141418.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:38.982Z,1492141418.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:39.373Z,1492141419.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:39.410Z,1492141419.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:39.820Z,1492141419.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:39.875Z,1492141419.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:40.165Z,1492141420.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:40.198Z,1492141420.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:40.574Z,1492141420.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:40.628Z,1492141420.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:40.965Z,1492141420.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:41.026Z,1492141421.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:41.465Z,1492141421.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:41.493Z,1492141421.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:41.799Z,1492141421.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:41.880Z,1492141421.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:42.159Z,1492141422.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:42.237Z,1492141422.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:42.559Z,1492141422.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:42.645Z,1492141422.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:42.979Z,1492141422.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:43.012Z,1492141423.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:43.369Z,1492141423.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:43.424Z,1492141423.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:43.785Z,1492141423.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:43.846Z,1492141423.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:44.167Z,1492141424.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:44.213Z,1492141424.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:44.577Z,1492141424.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:44.631Z,1492141424.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:44.966Z,1492141424.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:45.015Z,1492141425.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:45.374Z,1492141425.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:45.396Z,1492141425.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:45.790Z,1492141425.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:45.826Z,1492141425.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:46.160Z,1492141426.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:46.190Z,1492141426.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:46.558Z,1492141426.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:46.606Z,1492141426.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:46.959Z,1492141426.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:47.005Z,1492141427.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:47.358Z,1492141427.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:47.396Z,1492141427.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:47.833Z,1492141427.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:47.888Z,1492141427.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:48.159Z,1492141428.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:48.210Z,1492141428.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:48.557Z,1492141428.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:48.600Z,1492141428.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:48.961Z,1492141428.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:48.997Z,1492141428.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:49.366Z,1492141429.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:49.403Z,1492141429.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:49.755Z,1492141429.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:49.812Z,1492141429.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:50.158Z,1492141430.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:50.174Z,1492141430.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:50.605Z,1492141430.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:50.638Z,1492141430.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:50.958Z,1492141430.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:50.979Z,1492141430.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:51.409Z,1492141431.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:51.454Z,1492141431.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:51.776Z,1492141431.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:51.815Z,1492141431.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:52.196Z,1492141432.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:52.245Z,1492141432.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:52.563Z,1492141432.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:52.610Z,1492141432.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:52.959Z,1492141432.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:53.005Z,1492141433.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:53.357Z,1492141433.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:53.395Z,1492141433.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:53.784Z,1492141433.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:53.814Z,1492141433.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:54.169Z,1492141434.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:54.194Z,1492141434.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:54.592Z,1492141434.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:54.609Z,1492141434.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:54.962Z,1492141434.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:55.003Z,1492141435.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:55.373Z,1492141435.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:55.388Z,1492141435.388 [PNI_TCM](ERROR): CRC does not match. Expected:0x16873 got:0x49279
2017-04-14T03:43:55.408Z,1492141435.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:55.787Z,1492141435.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:55.869Z,1492141435.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:56.169Z,1492141436.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:56.210Z,1492141436.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:56.571Z,1492141436.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:56.610Z,1492141436.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:56.961Z,1492141436.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:56.979Z,1492141436.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:57.368Z,1492141437.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:57.404Z,1492141437.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:57.803Z,1492141437.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:57.871Z,1492141437.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:58.168Z,1492141438.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:58.187Z,1492141438.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:58.567Z,1492141438.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:58.591Z,1492141438.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:58.977Z,1492141438.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:58.992Z,1492141438.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:59.357Z,1492141439.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:59.399Z,1492141439.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:43:59.778Z,1492141439.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:43:59.789Z,1492141439.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x17203 got:0x57628
2017-04-14T03:43:59.830Z,1492141439.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:00.179Z,1492141440.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:00.188Z,1492141440.188 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:44:00.188Z,1492141440.188 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:44:00.188Z,1492141440.188 [BPC1](ERROR): Communications Fault
2017-04-14T03:44:00.197Z,1492141440.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:00.241Z,1492141440.241 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:44:00.563Z,1492141440.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:00.594Z,1492141440.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:00.957Z,1492141440.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:01.002Z,1492141441.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:01.357Z,1492141441.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:01.386Z,1492141441.386 [PNI_TCM](ERROR): CRC does not match. Expected:0x32640 got:0x49444
2017-04-14T03:44:01.414Z,1492141441.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:01.452Z,1492141441.452 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:44:01.452Z,1492141441.452 [BPC1] No Fault, FailCount= 1
2017-04-14T03:44:01.806Z,1492141441.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:01.910Z,1492141441.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:02.169Z,1492141442.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:02.226Z,1492141442.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:02.573Z,1492141442.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:02.601Z,1492141442.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:02.983Z,1492141442.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:02.998Z,1492141442.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:03.068Z,1492141443.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:03.369Z,1492141443.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:03.403Z,1492141443.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:03.762Z,1492141443.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:03.803Z,1492141443.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:03.864Z,1492141443.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:04.157Z,1492141444.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:04.198Z,1492141444.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:04.556Z,1492141444.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:04.578Z,1492141444.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:04.969Z,1492141444.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:05.006Z,1492141445.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:05.366Z,1492141445.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:05.410Z,1492141445.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:05.819Z,1492141445.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:05.860Z,1492141445.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:06.181Z,1492141446.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:06.214Z,1492141446.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:06.573Z,1492141446.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:06.632Z,1492141446.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:06.977Z,1492141446.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:07.002Z,1492141447.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:07.384Z,1492141447.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:07.438Z,1492141447.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:07.773Z,1492141447.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:07.801Z,1492141447.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:08.173Z,1492141448.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:08.193Z,1492141448.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:08.573Z,1492141448.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:08.598Z,1492141448.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:08.957Z,1492141448.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:09.037Z,1492141449.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:09.377Z,1492141449.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:09.394Z,1492141449.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:09.767Z,1492141449.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:09.808Z,1492141449.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:10.169Z,1492141450.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:10.196Z,1492141450.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:10.562Z,1492141450.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:10.600Z,1492141450.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:10.962Z,1492141450.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:10.996Z,1492141450.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:11.370Z,1492141451.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:11.398Z,1492141451.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:11.771Z,1492141451.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:11.803Z,1492141451.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:12.184Z,1492141452.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:12.216Z,1492141452.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:12.572Z,1492141452.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:12.588Z,1492141452.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:12.969Z,1492141452.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:13.054Z,1492141453.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:13.371Z,1492141453.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:13.387Z,1492141453.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:13.772Z,1492141453.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:13.831Z,1492141453.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:14.171Z,1492141454.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:14.199Z,1492141454.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:14.570Z,1492141454.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:14.626Z,1492141454.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:14.957Z,1492141454.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:15.007Z,1492141455.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:15.366Z,1492141455.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:15.396Z,1492141455.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:15.792Z,1492141455.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:15.838Z,1492141455.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:16.162Z,1492141456.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:16.187Z,1492141456.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:16.557Z,1492141456.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:16.586Z,1492141456.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:16.970Z,1492141456.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:16.997Z,1492141456.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:17.360Z,1492141457.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:17.394Z,1492141457.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:17.770Z,1492141457.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:17.797Z,1492141457.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:18.158Z,1492141458.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:18.209Z,1492141458.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:18.573Z,1492141458.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:18.620Z,1492141458.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:18.970Z,1492141458.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:18.986Z,1492141458.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:22.642Z,1492141462.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:22.665Z,1492141462.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:22.776Z,1492141462.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:22.825Z,1492141462.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:23.124Z,1492141463.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:23.156Z,1492141463.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:23.535Z,1492141463.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:23.550Z,1492141463.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:23.921Z,1492141463.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:23.949Z,1492141463.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:24.324Z,1492141464.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:24.358Z,1492141464.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:24.738Z,1492141464.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:24.762Z,1492141464.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:25.133Z,1492141465.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:25.149Z,1492141465.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:25.521Z,1492141465.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:25.563Z,1492141465.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:25.923Z,1492141465.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:25.994Z,1492141465.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:26.321Z,1492141466.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:26.366Z,1492141466.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:26.733Z,1492141466.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:26.796Z,1492141466.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:27.127Z,1492141467.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:27.157Z,1492141467.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:27.518Z,1492141467.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:27.571Z,1492141467.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:27.934Z,1492141467.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:27.990Z,1492141467.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:28.326Z,1492141468.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:28.344Z,1492141468.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:28.729Z,1492141468.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:28.745Z,1492141468.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:29.130Z,1492141469.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:29.146Z,1492141469.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:29.533Z,1492141469.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:29.552Z,1492141469.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:29.928Z,1492141469.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:29.944Z,1492141469.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:30.326Z,1492141470.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:30.350Z,1492141470.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:30.729Z,1492141470.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:30.744Z,1492141470.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:31.129Z,1492141471.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:31.145Z,1492141471.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:31.537Z,1492141471.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:31.558Z,1492141471.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:31.915Z,1492141471.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:31.951Z,1492141471.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:32.330Z,1492141472.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:32.346Z,1492141472.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:32.726Z,1492141472.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:32.742Z,1492141472.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:33.126Z,1492141473.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:33.141Z,1492141473.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:33.529Z,1492141473.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:33.545Z,1492141473.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:33.934Z,1492141473.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:33.950Z,1492141473.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:34.330Z,1492141474.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:34.350Z,1492141474.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:34.731Z,1492141474.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:34.747Z,1492141474.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:35.135Z,1492141475.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:35.151Z,1492141475.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:35.536Z,1492141475.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:35.552Z,1492141475.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:35.929Z,1492141475.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:35.945Z,1492141475.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:36.327Z,1492141476.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:36.351Z,1492141476.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:36.742Z,1492141476.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:36.769Z,1492141476.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:37.121Z,1492141477.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:37.154Z,1492141477.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:37.537Z,1492141477.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:37.558Z,1492141477.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:37.921Z,1492141477.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:37.954Z,1492141477.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:38.329Z,1492141478.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:38.367Z,1492141478.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:38.724Z,1492141478.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:38.801Z,1492141478.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:39.118Z,1492141479.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:39.134Z,1492141479.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:39.525Z,1492141479.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:39.541Z,1492141479.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:39.931Z,1492141479.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:39.989Z,1492141479.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:40.329Z,1492141480.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:40.344Z,1492141480.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:40.730Z,1492141480.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:40.788Z,1492141480.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:41.121Z,1492141481.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:41.167Z,1492141481.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:41.522Z,1492141481.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:41.538Z,1492141481.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:41.947Z,1492141481.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:41.994Z,1492141481.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:42.323Z,1492141482.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:42.359Z,1492141482.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:42.725Z,1492141482.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:42.751Z,1492141482.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:43.121Z,1492141483.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:43.157Z,1492141483.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:43.536Z,1492141483.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:43.564Z,1492141483.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:43.927Z,1492141483.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:43.955Z,1492141483.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:44.325Z,1492141484.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:44.361Z,1492141484.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:44.726Z,1492141484.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:44.743Z,1492141484.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:45.128Z,1492141485.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:45.165Z,1492141485.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:45.523Z,1492141485.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:45.544Z,1492141485.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:45.933Z,1492141485.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:46.032Z,1492141486.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:46.342Z,1492141486.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:46.360Z,1492141486.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:46.718Z,1492141486.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:46.751Z,1492141486.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:47.153Z,1492141487.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:47.199Z,1492141487.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:47.538Z,1492141487.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:47.589Z,1492141487.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:47.923Z,1492141487.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:48.044Z,1492141488.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:48.322Z,1492141488.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:48.357Z,1492141488.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:48.730Z,1492141488.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:48.767Z,1492141488.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:49.142Z,1492141489.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:49.188Z,1492141489.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:49.540Z,1492141489.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:49.576Z,1492141489.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:49.943Z,1492141489.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:49.961Z,1492141489.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:50.324Z,1492141490.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:50.380Z,1492141490.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:50.723Z,1492141490.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:50.765Z,1492141490.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:51.122Z,1492141491.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:51.131Z,1492141491.131 [BPC1](ERROR): Failed to parse message.
2017-04-14T03:44:51.131Z,1492141491.131 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T03:44:51.131Z,1492141491.131 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:44:51.131Z,1492141491.131 [BPC1](ERROR): Data Fault
2017-04-14T03:44:51.140Z,1492141491.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:51.195Z,1492141491.195 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:44:51.535Z,1492141491.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:51.594Z,1492141491.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:51.939Z,1492141491.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:51.956Z,1492141491.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:52.332Z,1492141492.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:52.352Z,1492141492.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:52.394Z,1492141492.395 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:44:52.395Z,1492141492.395 [BPC1] No Fault, FailCount= 1
2017-04-14T03:44:52.733Z,1492141492.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:52.826Z,1492141492.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:53.143Z,1492141493.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:53.190Z,1492141493.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:53.522Z,1492141493.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:53.550Z,1492141493.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:53.924Z,1492141493.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:53.968Z,1492141493.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:54.326Z,1492141494.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:54.374Z,1492141494.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:54.736Z,1492141494.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:54.786Z,1492141494.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:55.133Z,1492141495.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:55.156Z,1492141495.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:55.541Z,1492141495.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:55.559Z,1492141495.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:55.933Z,1492141495.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:55.985Z,1492141495.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:56.336Z,1492141496.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:56.370Z,1492141496.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:56.739Z,1492141496.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:56.757Z,1492141496.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:57.138Z,1492141497.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:57.156Z,1492141497.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:57.533Z,1492141497.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:57.571Z,1492141497.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:57.927Z,1492141497.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:57.944Z,1492141497.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:58.341Z,1492141498.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:58.374Z,1492141498.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:58.738Z,1492141498.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:58.777Z,1492141498.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:59.134Z,1492141499.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:59.156Z,1492141499.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:59.533Z,1492141499.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:44:59.550Z,1492141499.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:44:59.983Z,1492141499.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:00.024Z,1492141500.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:00.334Z,1492141500.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:00.375Z,1492141500.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:00.726Z,1492141500.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:00.742Z,1492141500.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:01.126Z,1492141501.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:01.151Z,1492141501.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:01.529Z,1492141501.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:01.550Z,1492141501.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:02.027Z,1492141502.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:02.107Z,1492141502.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:02.321Z,1492141502.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:02.357Z,1492141502.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:02.725Z,1492141502.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:02.759Z,1492141502.759 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:02.760Z,1492141502.760 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T03:45:02.760Z,1492141502.760 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:45:02.766Z,1492141502.766 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:02.767Z,1492141502.767 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T03:45:02.767Z,1492141502.767 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:45:02.781Z,1492141502.781 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:45:02.781Z,1492141502.781 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:45:03.121Z,1492141503.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:03.194Z,1492141503.194 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:45:03.194Z,1492141503.194 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T03:45:03.204Z,1492141503.204 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:45:03.204Z,1492141503.204 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T03:45:03.533Z,1492141503.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:03.704Z,1492141503.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:45:03.704Z,1492141503.704 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:45:03.705Z,1492141503.705 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:45:03.719Z,1492141503.719 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:45:03.727Z,1492141503.727 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:45:03.728Z,1492141503.728 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:45:03.929Z,1492141503.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:03.945Z,1492141503.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:04.334Z,1492141504.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:04.351Z,1492141504.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:04.733Z,1492141504.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:04.792Z,1492141504.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:05.121Z,1492141505.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:05.150Z,1492141505.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:05.521Z,1492141505.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:05.630Z,1492141505.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:05.915Z,1492141505.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:05.966Z,1492141505.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:06.344Z,1492141506.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:06.360Z,1492141506.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:06.726Z,1492141506.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:06.744Z,1492141506.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:07.126Z,1492141507.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:07.146Z,1492141507.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:07.531Z,1492141507.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:07.548Z,1492141507.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:07.941Z,1492141507.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:07.962Z,1492141507.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:08.323Z,1492141508.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:08.398Z,1492141508.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:08.718Z,1492141508.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:08.770Z,1492141508.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:09.129Z,1492141509.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:09.162Z,1492141509.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:09.545Z,1492141509.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:09.691Z,1492141509.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:09.948Z,1492141509.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:10.042Z,1492141510.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:10.339Z,1492141510.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:10.405Z,1492141510.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:10.724Z,1492141510.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:10.766Z,1492141510.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:11.146Z,1492141511.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:11.215Z,1492141511.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:11.526Z,1492141511.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:11.542Z,1492141511.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:11.939Z,1492141511.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:11.973Z,1492141511.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:12.333Z,1492141512.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:12.369Z,1492141512.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:12.729Z,1492141512.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:12.750Z,1492141512.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:13.129Z,1492141513.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:13.150Z,1492141513.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:13.534Z,1492141513.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:13.550Z,1492141513.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:14.001Z,1492141514.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:14.052Z,1492141514.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:14.348Z,1492141514.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:14.373Z,1492141514.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:14.468Z,1492141514.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:14.738Z,1492141514.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:14.772Z,1492141514.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:15.133Z,1492141515.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:15.211Z,1492141515.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:15.264Z,1492141515.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:15.531Z,1492141515.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:15.559Z,1492141515.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:16.013Z,1492141516.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:16.052Z,1492141516.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:16.327Z,1492141516.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:16.481Z,1492141516.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:16.733Z,1492141516.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:16.866Z,1492141516.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:17.128Z,1492141517.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:17.163Z,1492141517.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:17.525Z,1492141517.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:17.710Z,1492141517.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:17.948Z,1492141517.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:17.982Z,1492141517.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:18.339Z,1492141518.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:18.388Z,1492141518.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:18.750Z,1492141518.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:18.830Z,1492141518.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:19.135Z,1492141519.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:19.152Z,1492141519.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:25.827Z,1492141525.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:25.897Z,1492141525.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:25.997Z,1492141525.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:26.023Z,1492141526.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:26.379Z,1492141526.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:26.398Z,1492141526.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:26.783Z,1492141526.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:26.799Z,1492141526.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:27.183Z,1492141527.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:27.202Z,1492141527.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:27.572Z,1492141527.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:27.601Z,1492141527.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:27.971Z,1492141527.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:28.012Z,1492141528.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:28.397Z,1492141528.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:28.406Z,1492141528.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:28.421Z,1492141528.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:28.781Z,1492141528.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:28.813Z,1492141528.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:29.178Z,1492141529.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:29.200Z,1492141529.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:29.256Z,1492141529.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:29.569Z,1492141529.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:29.596Z,1492141529.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:29.999Z,1492141529.999 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:30.024Z,1492141530.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:30.072Z,1492141530.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:30.369Z,1492141530.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:30.404Z,1492141530.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:30.415Z,1492141530.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:30.769Z,1492141530.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:30.802Z,1492141530.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:31.170Z,1492141531.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:31.200Z,1492141531.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:31.292Z,1492141531.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:31.627Z,1492141531.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:31.670Z,1492141531.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:31.973Z,1492141531.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:31.996Z,1492141531.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:32.047Z,1492141532.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:32.369Z,1492141532.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:32.400Z,1492141532.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:32.444Z,1492141532.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:32.772Z,1492141532.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:32.806Z,1492141532.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:33.174Z,1492141533.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:33.196Z,1492141533.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:33.210Z,1492141533.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:33.618Z,1492141533.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:33.671Z,1492141533.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:33.969Z,1492141533.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:33.992Z,1492141533.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:34.004Z,1492141534.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:34.381Z,1492141534.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:34.397Z,1492141534.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:34.420Z,1492141534.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:34.790Z,1492141534.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:34.822Z,1492141534.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:35.176Z,1492141535.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:35.192Z,1492141535.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:35.215Z,1492141535.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:35.617Z,1492141535.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:35.731Z,1492141535.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:35.978Z,1492141535.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:35.988Z,1492141535.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:36.046Z,1492141536.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:36.377Z,1492141536.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:36.393Z,1492141536.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:36.405Z,1492141536.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:36.769Z,1492141536.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:36.798Z,1492141536.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:37.169Z,1492141537.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:37.188Z,1492141537.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:37.205Z,1492141537.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:37.618Z,1492141537.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:37.653Z,1492141537.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:37.967Z,1492141537.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:37.984Z,1492141537.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:38.005Z,1492141538.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:38.369Z,1492141538.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:38.392Z,1492141538.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:38.410Z,1492141538.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:38.777Z,1492141538.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:38.818Z,1492141538.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:39.175Z,1492141539.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:39.188Z,1492141539.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:39.237Z,1492141539.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:39.696Z,1492141539.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:39.724Z,1492141539.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:39.970Z,1492141539.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:39.984Z,1492141539.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:40.030Z,1492141540.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:40.374Z,1492141540.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:40.388Z,1492141540.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:40.421Z,1492141540.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:40.816Z,1492141540.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:40.835Z,1492141540.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:41.181Z,1492141541.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:41.184Z,1492141541.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:41.214Z,1492141541.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:41.569Z,1492141541.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:41.607Z,1492141541.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:41.980Z,1492141541.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:42.017Z,1492141542.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:42.064Z,1492141542.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:42.376Z,1492141542.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:42.384Z,1492141542.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:42.409Z,1492141542.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:42.779Z,1492141542.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:42.820Z,1492141542.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:43.178Z,1492141543.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:43.180Z,1492141543.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:43.246Z,1492141543.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:43.580Z,1492141543.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:43.599Z,1492141543.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:43.973Z,1492141543.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:43.984Z,1492141543.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:44.020Z,1492141544.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:44.371Z,1492141544.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:44.389Z,1492141544.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:44.458Z,1492141544.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:44.763Z,1492141544.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:44.826Z,1492141544.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:45.174Z,1492141545.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:45.184Z,1492141545.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:45.227Z,1492141545.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:45.599Z,1492141545.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:45.665Z,1492141545.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:45.985Z,1492141545.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:45.998Z,1492141545.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:46.043Z,1492141546.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:46.378Z,1492141546.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:46.392Z,1492141546.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:46.470Z,1492141546.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:46.776Z,1492141546.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:46.838Z,1492141546.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:47.178Z,1492141547.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:47.189Z,1492141547.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:47.238Z,1492141547.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:47.602Z,1492141547.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:47.649Z,1492141547.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:47.984Z,1492141547.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:47.995Z,1492141547.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:48.042Z,1492141548.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:48.387Z,1492141548.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:48.392Z,1492141548.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:48.435Z,1492141548.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:48.781Z,1492141548.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:48.804Z,1492141548.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:49.188Z,1492141549.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:49.209Z,1492141549.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:49.230Z,1492141549.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:49.642Z,1492141549.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:49.667Z,1492141549.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:49.970Z,1492141549.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:49.976Z,1492141549.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:50.007Z,1492141550.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:50.378Z,1492141550.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:50.423Z,1492141550.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:50.781Z,1492141550.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:50.784Z,1492141550.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:50.808Z,1492141550.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:51.175Z,1492141551.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:51.224Z,1492141551.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:51.576Z,1492141551.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:51.597Z,1492141551.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:51.639Z,1492141551.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:51.980Z,1492141551.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:52.002Z,1492141552.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:52.076Z,1492141552.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:52.393Z,1492141552.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:52.414Z,1492141552.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:52.781Z,1492141552.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:52.840Z,1492141552.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:52.876Z,1492141552.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:53.173Z,1492141553.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:53.209Z,1492141553.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:53.618Z,1492141553.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:53.672Z,1492141553.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:53.690Z,1492141553.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:53.994Z,1492141553.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:54.010Z,1492141554.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:54.136Z,1492141554.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:54.381Z,1492141554.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:54.436Z,1492141554.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:54.789Z,1492141554.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:54.808Z,1492141554.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:54.932Z,1492141554.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:55.195Z,1492141555.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:55.212Z,1492141555.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:55.604Z,1492141555.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:55.620Z,1492141555.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:55.728Z,1492141555.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:56.002Z,1492141556.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:56.028Z,1492141556.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:56.308Z,1492141556.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:56.390Z,1492141556.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:56.463Z,1492141556.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:56.785Z,1492141556.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:56.816Z,1492141556.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:57.119Z,1492141557.119 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:57.177Z,1492141557.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:57.280Z,1492141557.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:57.584Z,1492141557.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:57.652Z,1492141557.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:57.916Z,1492141557.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:57.993Z,1492141557.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:58.034Z,1492141558.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:58.328Z,1492141558.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:58.390Z,1492141558.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:58.436Z,1492141558.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:58.773Z,1492141558.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:58.858Z,1492141558.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:59.124Z,1492141559.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:59.170Z,1492141559.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:59.219Z,1492141559.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:59.616Z,1492141559.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:45:59.709Z,1492141559.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:45:59.937Z,1492141559.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:00.011Z,1492141560.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:00.074Z,1492141560.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:00.376Z,1492141560.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:00.386Z,1492141560.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:00.443Z,1492141560.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:00.782Z,1492141560.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:00.842Z,1492141560.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:01.177Z,1492141561.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:01.184Z,1492141561.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:01.242Z,1492141561.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:01.600Z,1492141561.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:01.641Z,1492141561.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:01.973Z,1492141561.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:01.985Z,1492141561.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:02.017Z,1492141562.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:02.376Z,1492141562.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:02.380Z,1492141562.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:02.412Z,1492141562.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:02.769Z,1492141562.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:02.805Z,1492141562.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:03.177Z,1492141563.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:03.181Z,1492141563.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:03.224Z,1492141563.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:03.575Z,1492141563.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:03.627Z,1492141563.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:03.973Z,1492141563.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:03.980Z,1492141563.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:04.030Z,1492141564.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:04.378Z,1492141564.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:04.386Z,1492141564.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:04.425Z,1492141564.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:04.785Z,1492141564.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:04.817Z,1492141564.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:05.172Z,1492141565.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:05.180Z,1492141565.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:05.202Z,1492141565.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:05.592Z,1492141565.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:05.637Z,1492141565.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:05.970Z,1492141565.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:05.993Z,1492141565.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:06.025Z,1492141566.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:06.376Z,1492141566.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:06.389Z,1492141566.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:06.405Z,1492141566.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:06.780Z,1492141566.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:06.795Z,1492141566.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:07.166Z,1492141567.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:07.172Z,1492141567.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:07.218Z,1492141567.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:07.612Z,1492141567.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:07.647Z,1492141567.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:07.969Z,1492141567.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:07.996Z,1492141567.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:08.034Z,1492141568.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:08.369Z,1492141568.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:08.376Z,1492141568.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:08.412Z,1492141568.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:08.770Z,1492141568.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:08.814Z,1492141568.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:09.172Z,1492141569.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:09.179Z,1492141569.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:09.205Z,1492141569.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:09.581Z,1492141569.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:09.602Z,1492141569.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:09.980Z,1492141569.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:09.989Z,1492141569.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:10.005Z,1492141570.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:10.384Z,1492141570.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:10.390Z,1492141570.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:10.419Z,1492141570.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:10.774Z,1492141570.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:10.806Z,1492141570.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:11.180Z,1492141571.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:11.189Z,1492141571.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:11.226Z,1492141571.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:11.584Z,1492141571.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:11.634Z,1492141571.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:11.977Z,1492141571.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:12.071Z,1492141572.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:12.384Z,1492141572.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:12.429Z,1492141572.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:12.805Z,1492141572.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:13.180Z,1492141573.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:13.260Z,1492141573.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:13.629Z,1492141573.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:13.974Z,1492141573.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:14.034Z,1492141574.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:14.402Z,1492141574.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:14.784Z,1492141574.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:14.833Z,1492141574.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:15.223Z,1492141575.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:15.579Z,1492141575.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:15.580Z,1492141575.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:15.631Z,1492141575.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:15.985Z,1492141575.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:16.001Z,1492141576.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:16.004Z,1492141576.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:16.382Z,1492141576.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:16.402Z,1492141576.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:16.789Z,1492141576.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:16.800Z,1492141576.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:16.805Z,1492141576.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:17.185Z,1492141577.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:17.201Z,1492141577.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:17.583Z,1492141577.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:17.596Z,1492141577.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:17.602Z,1492141577.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:17.978Z,1492141577.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:17.995Z,1492141577.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:17.000Z,1492141578.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:18.381Z,1492141578.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:18.405Z,1492141578.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:18.794Z,1492141578.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:18.796Z,1492141578.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:18.819Z,1492141578.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:19.185Z,1492141579.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:19.202Z,1492141579.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:19.592Z,1492141579.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:19.996Z,1492141579.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:20.792Z,1492141580.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:21.588Z,1492141581.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:21.000Z,1492141582.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:22.649Z,1492141582.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:22.713Z,1492141582.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:22.798Z,1492141582.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:22.805Z,1492141582.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:22.835Z,1492141582.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:23.202Z,1492141583.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:23.222Z,1492141583.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:23.592Z,1492141583.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:23.605Z,1492141583.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:23.621Z,1492141583.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:23.985Z,1492141583.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:24.018Z,1492141584.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:24.268Z,1492141584.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:24.393Z,1492141584.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:24.421Z,1492141584.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:24.428Z,1492141584.428 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:24.428Z,1492141584.428 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T03:46:24.428Z,1492141584.428 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:46:24.442Z,1492141584.442 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:46:24.785Z,1492141584.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:24.806Z,1492141584.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:24.861Z,1492141584.861 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:46:24.861Z,1492141584.861 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T03:46:25.064Z,1492141585.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:25.189Z,1492141585.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:25.210Z,1492141585.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:25.232Z,1492141585.232 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:46:25.233Z,1492141585.233 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:46:25.233Z,1492141585.233 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:46:25.597Z,1492141585.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:25.638Z,1492141585.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:25.860Z,1492141585.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:26.001Z,1492141586.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:26.033Z,1492141586.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:26.264Z,1492141586.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:26.394Z,1492141586.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:26.411Z,1492141586.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:26.794Z,1492141586.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:26.814Z,1492141586.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:27.060Z,1492141587.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:27.196Z,1492141587.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:27.212Z,1492141587.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:27.593Z,1492141587.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:27.627Z,1492141587.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:27.856Z,1492141587.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:27.985Z,1492141587.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:28.020Z,1492141588.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:28.260Z,1492141588.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:28.393Z,1492141588.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:28.451Z,1492141588.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:28.785Z,1492141588.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:28.819Z,1492141588.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:29.056Z,1492141589.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:29.196Z,1492141589.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:29.257Z,1492141589.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:29.587Z,1492141589.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:29.653Z,1492141589.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:29.852Z,1492141589.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:29.985Z,1492141589.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:30.018Z,1492141590.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:30.256Z,1492141590.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:30.385Z,1492141590.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:30.412Z,1492141590.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:30.785Z,1492141590.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:30.818Z,1492141590.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:31.052Z,1492141591.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:31.185Z,1492141591.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:31.214Z,1492141591.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:31.585Z,1492141591.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:31.612Z,1492141591.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:31.848Z,1492141591.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:31.985Z,1492141591.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:32.012Z,1492141592.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:32.252Z,1492141592.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:32.385Z,1492141592.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:32.411Z,1492141592.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:32.789Z,1492141592.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:32.816Z,1492141592.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:33.048Z,1492141593.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:33.185Z,1492141593.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:33.225Z,1492141593.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:33.585Z,1492141593.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:33.615Z,1492141593.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:33.844Z,1492141593.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:33.985Z,1492141593.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:34.012Z,1492141594.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:34.248Z,1492141594.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:34.385Z,1492141594.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:34.418Z,1492141594.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:34.785Z,1492141594.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:34.811Z,1492141594.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:35.044Z,1492141595.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:35.201Z,1492141595.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:35.222Z,1492141595.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:35.587Z,1492141595.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:35.614Z,1492141595.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:35.841Z,1492141595.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:36.005Z,1492141596.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:36.022Z,1492141596.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:36.248Z,1492141596.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:36.389Z,1492141596.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:36.416Z,1492141596.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:36.806Z,1492141596.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:36.826Z,1492141596.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:37.046Z,1492141597.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:37.185Z,1492141597.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:37.211Z,1492141597.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:37.589Z,1492141597.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:37.616Z,1492141597.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:37.840Z,1492141597.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:37.985Z,1492141597.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:38.012Z,1492141598.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:38.244Z,1492141598.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:38.385Z,1492141598.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:38.414Z,1492141598.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:38.801Z,1492141598.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:38.822Z,1492141598.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:39.040Z,1492141599.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:39.185Z,1492141599.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:39.217Z,1492141599.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:39.589Z,1492141599.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:39.617Z,1492141599.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:39.836Z,1492141599.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:40.013Z,1492141600.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:40.029Z,1492141600.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:40.240Z,1492141600.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:40.397Z,1492141600.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:40.426Z,1492141600.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:40.798Z,1492141600.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:40.825Z,1492141600.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:41.036Z,1492141601.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:41.185Z,1492141601.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:41.201Z,1492141601.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:41.590Z,1492141601.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:41.638Z,1492141601.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:41.832Z,1492141601.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:41.992Z,1492141601.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:42.069Z,1492141602.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:42.236Z,1492141602.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:42.393Z,1492141602.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:42.411Z,1492141602.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:42.793Z,1492141602.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:42.851Z,1492141602.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:43.032Z,1492141603.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:43.192Z,1492141603.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:43.215Z,1492141603.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:43.593Z,1492141603.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:43.650Z,1492141603.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:43.828Z,1492141603.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:43.988Z,1492141603.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:44.045Z,1492141604.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:44.232Z,1492141604.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:44.393Z,1492141604.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:44.414Z,1492141604.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:44.801Z,1492141604.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:44.816Z,1492141604.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:45.028Z,1492141605.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:45.185Z,1492141605.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:45.212Z,1492141605.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:45.585Z,1492141605.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:45.611Z,1492141605.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:45.824Z,1492141605.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:46.006Z,1492141606.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:46.022Z,1492141606.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:46.228Z,1492141606.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:46.385Z,1492141606.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:46.412Z,1492141606.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:46.785Z,1492141606.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:46.819Z,1492141606.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:47.024Z,1492141607.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:47.185Z,1492141607.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:47.211Z,1492141607.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:47.585Z,1492141607.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:47.612Z,1492141607.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:47.820Z,1492141607.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:48.005Z,1492141608.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:48.021Z,1492141608.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:48.224Z,1492141608.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:48.423Z,1492141608.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:48.449Z,1492141608.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:48.789Z,1492141608.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:48.805Z,1492141608.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:49.020Z,1492141609.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:49.200Z,1492141609.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:49.251Z,1492141609.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:49.603Z,1492141609.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:49.619Z,1492141609.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:49.816Z,1492141609.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:49.987Z,1492141609.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:50.025Z,1492141610.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:50.220Z,1492141610.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:50.387Z,1492141610.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:50.430Z,1492141610.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:50.793Z,1492141610.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:50.820Z,1492141610.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:51.016Z,1492141611.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:51.191Z,1492141611.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:51.219Z,1492141611.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:51.652Z,1492141611.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:51.680Z,1492141611.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:51.812Z,1492141611.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:51.987Z,1492141611.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:52.025Z,1492141612.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:52.260Z,1492141612.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:52.398Z,1492141612.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:52.415Z,1492141612.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:52.795Z,1492141612.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:52.810Z,1492141612.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:53.056Z,1492141613.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:53.199Z,1492141613.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:53.214Z,1492141613.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:53.595Z,1492141613.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:53.611Z,1492141613.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:53.852Z,1492141613.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:53.992Z,1492141613.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:54.020Z,1492141614.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:54.256Z,1492141614.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:54.387Z,1492141614.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:54.423Z,1492141614.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:54.800Z,1492141614.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:54.816Z,1492141614.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:55.052Z,1492141615.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:55.185Z,1492141615.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:55.214Z,1492141615.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:55.585Z,1492141615.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:55.621Z,1492141615.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:55.848Z,1492141615.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:55.997Z,1492141615.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:56.086Z,1492141616.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:56.252Z,1492141616.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:56.402Z,1492141616.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:56.432Z,1492141616.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:56.786Z,1492141616.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:56.802Z,1492141616.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:57.048Z,1492141617.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:57.193Z,1492141617.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:57.257Z,1492141617.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:57.590Z,1492141617.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:57.614Z,1492141617.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:57.844Z,1492141617.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:57.988Z,1492141617.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:58.038Z,1492141618.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:58.248Z,1492141618.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:58.394Z,1492141618.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:58.447Z,1492141618.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:58.792Z,1492141618.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:58.808Z,1492141618.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:59.044Z,1492141619.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:59.193Z,1492141619.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:59.208Z,1492141619.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:59.602Z,1492141619.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:59.622Z,1492141619.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:46:59.840Z,1492141619.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:46:59.988Z,1492141619.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:00.008Z,1492141620.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:00.244Z,1492141620.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:00.393Z,1492141620.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:00.409Z,1492141620.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:00.802Z,1492141620.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:00.817Z,1492141620.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:01.042Z,1492141621.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:01.185Z,1492141621.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:01.222Z,1492141621.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:01.585Z,1492141621.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:01.615Z,1492141621.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:01.836Z,1492141621.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:02.006Z,1492141622.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:02.026Z,1492141622.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:02.240Z,1492141622.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:02.387Z,1492141622.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:02.422Z,1492141622.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:02.782Z,1492141622.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:02.820Z,1492141622.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:03.036Z,1492141623.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:03.188Z,1492141623.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:03.208Z,1492141623.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:03.593Z,1492141623.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:03.608Z,1492141623.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:03.833Z,1492141623.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:03.992Z,1492141623.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:04.012Z,1492141624.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:04.240Z,1492141624.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:04.393Z,1492141624.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:04.414Z,1492141624.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:04.793Z,1492141624.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:04.809Z,1492141624.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:05.036Z,1492141625.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:05.185Z,1492141625.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:05.200Z,1492141625.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:05.587Z,1492141625.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:05.635Z,1492141625.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:05.832Z,1492141625.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:05.991Z,1492141625.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:06.032Z,1492141626.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:06.236Z,1492141626.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:06.385Z,1492141626.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:06.426Z,1492141626.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:06.796Z,1492141626.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:06.817Z,1492141626.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:07.032Z,1492141627.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:07.185Z,1492141627.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:07.220Z,1492141627.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:07.604Z,1492141627.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:07.648Z,1492141627.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:07.828Z,1492141627.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:08.046Z,1492141628.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:08.111Z,1492141628.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:08.274Z,1492141628.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:08.412Z,1492141628.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:08.428Z,1492141628.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:08.804Z,1492141628.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:08.853Z,1492141628.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:09.069Z,1492141629.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:09.198Z,1492141629.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:09.262Z,1492141629.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:09.621Z,1492141629.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:09.665Z,1492141629.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:09.864Z,1492141629.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:09.985Z,1492141629.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:10.006Z,1492141630.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:10.268Z,1492141630.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:10.403Z,1492141630.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:10.445Z,1492141630.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:10.792Z,1492141630.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:10.925Z,1492141630.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:11.068Z,1492141631.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:11.185Z,1492141631.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:11.216Z,1492141631.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:11.611Z,1492141631.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:11.666Z,1492141631.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:11.852Z,1492141631.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:11.999Z,1492141631.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:12.023Z,1492141632.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:12.386Z,1492141632.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:12.493Z,1492141632.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:12.648Z,1492141632.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:12.785Z,1492141632.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:12.838Z,1492141632.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:13.193Z,1492141633.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:13.234Z,1492141633.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:13.444Z,1492141633.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:13.586Z,1492141633.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:13.661Z,1492141633.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:13.991Z,1492141633.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:14.010Z,1492141634.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:14.024Z,1492141634.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:14.393Z,1492141634.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:14.408Z,1492141634.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:14.795Z,1492141634.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:14.810Z,1492141634.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:14.820Z,1492141634.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:15.191Z,1492141635.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:15.214Z,1492141635.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:15.594Z,1492141635.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:15.614Z,1492141635.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:15.616Z,1492141635.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:15.996Z,1492141635.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:16.013Z,1492141636.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:16.020Z,1492141636.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:16.393Z,1492141636.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:16.414Z,1492141636.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:16.802Z,1492141636.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:16.816Z,1492141636.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:16.824Z,1492141636.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:17.219Z,1492141637.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:17.610Z,1492141637.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:17.612Z,1492141637.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:18.016Z,1492141638.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:18.023Z,1492141638.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:18.418Z,1492141638.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:18.426Z,1492141638.426 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T03:47:18.426Z,1492141638.426 [Default:CheckIn:C.Wait] Stopped
2017-04-14T03:47:18.426Z,1492141638.427 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T03:47:18.427Z,1492141638.427 [Default:CheckIn:D] Running Loop=1
2017-04-14T03:47:18.812Z,1492141638.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:18.818Z,1492141638.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:18.828Z,1492141638.829 [Default:CheckIn:D] Stopped
2017-04-14T03:47:18.829Z,1492141638.829 [Default:CheckIn:E] Running Loop=1
2017-04-14T03:47:19.220Z,1492141639.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:19.229Z,1492141639.230 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.225163 min 
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn:E] Stopped
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn] Stopped
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn](INFO): Running loop #4
2017-04-14T03:47:19.230Z,1492141639.230 [Default:CheckIn] Running Loop=4
2017-04-14T03:47:19.231Z,1492141639.231 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T03:47:19.231Z,1492141639.231 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T03:47:19.608Z,1492141639.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:20.268Z,1492141640.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:21.064Z,1492141641.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:21.860Z,1492141641.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:22.266Z,1492141642.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:23.060Z,1492141643.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:23.857Z,1492141643.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:24.131Z,1492141644.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:24.213Z,1492141644.213 [NAL9602](INFO): Powering up
2017-04-14T03:47:24.314Z,1492141644.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:24.652Z,1492141644.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:24.702Z,1492141644.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:25.120Z,1492141645.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:25.448Z,1492141645.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:25.609Z,1492141645.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:25.880Z,1492141645.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:25.892Z,1492141645.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:26.321Z,1492141646.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:26.676Z,1492141646.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:26.688Z,1492141646.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:27.096Z,1492141647.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:27.484Z,1492141647.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:27.551Z,1492141647.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:27.892Z,1492141647.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:27.904Z,1492141647.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:28.257Z,1492141648.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:28.674Z,1492141648.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:28.700Z,1492141648.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:29.064Z,1492141649.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:29.496Z,1492141649.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:29.519Z,1492141649.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:29.908Z,1492141649.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:29.910Z,1492141649.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:30.279Z,1492141650.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:30.667Z,1492141650.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:30.704Z,1492141650.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:31.078Z,1492141651.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:31.500Z,1492141651.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:31.537Z,1492141651.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:31.874Z,1492141651.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:31.928Z,1492141651.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:32.272Z,1492141652.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:32.667Z,1492141652.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:32.724Z,1492141652.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:33.074Z,1492141653.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:33.493Z,1492141653.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:33.520Z,1492141653.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:33.855Z,1492141653.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:34.156Z,1492141654.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:34.282Z,1492141654.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:34.677Z,1492141654.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:34.952Z,1492141654.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:35.013Z,1492141655.013 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:47:35.101Z,1492141655.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:35.476Z,1492141655.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:35.748Z,1492141655.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:35.884Z,1492141655.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:36.152Z,1492141656.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:36.274Z,1492141656.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:36.676Z,1492141656.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:36.948Z,1492141656.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:37.066Z,1492141657.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:37.474Z,1492141657.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:37.745Z,1492141657.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:37.867Z,1492141657.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:38.152Z,1492141658.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:38.283Z,1492141658.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:38.678Z,1492141658.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:38.949Z,1492141658.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:39.073Z,1492141659.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:39.479Z,1492141659.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:39.744Z,1492141659.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:39.929Z,1492141659.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:40.148Z,1492141660.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:40.280Z,1492141660.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:40.697Z,1492141660.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:40.944Z,1492141660.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:41.091Z,1492141661.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:41.502Z,1492141661.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:41.740Z,1492141661.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:41.890Z,1492141661.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:42.148Z,1492141662.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:42.327Z,1492141662.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:42.662Z,1492141662.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:42.944Z,1492141662.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:43.078Z,1492141663.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:43.468Z,1492141663.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:43.741Z,1492141663.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:43.872Z,1492141663.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:44.144Z,1492141664.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:44.278Z,1492141664.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:44.677Z,1492141664.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:44.940Z,1492141664.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:45.123Z,1492141665.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:45.502Z,1492141665.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:45.736Z,1492141665.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:45.884Z,1492141665.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:46.140Z,1492141666.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:46.375Z,1492141666.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:46.706Z,1492141666.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:46.936Z,1492141666.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:47.067Z,1492141667.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:47.482Z,1492141667.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:47.732Z,1492141667.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:47.861Z,1492141667.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:48.136Z,1492141668.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:48.259Z,1492141668.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:48.666Z,1492141668.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:48.932Z,1492141668.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:49.069Z,1492141669.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:49.470Z,1492141669.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:49.728Z,1492141669.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:49.863Z,1492141669.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:50.144Z,1492141670.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:50.256Z,1492141670.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:50.652Z,1492141670.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:50.940Z,1492141670.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:51.065Z,1492141671.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:51.458Z,1492141671.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:51.736Z,1492141671.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:51.861Z,1492141671.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:52.140Z,1492141672.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:52.273Z,1492141672.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:52.670Z,1492141672.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:52.936Z,1492141672.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:53.055Z,1492141673.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:53.506Z,1492141673.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:53.740Z,1492141673.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:53.901Z,1492141673.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:54.144Z,1492141674.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:54.350Z,1492141674.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:54.675Z,1492141674.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:54.940Z,1492141674.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:55.129Z,1492141675.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:55.474Z,1492141675.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:55.736Z,1492141675.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:55.978Z,1492141675.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:56.140Z,1492141676.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:56.424Z,1492141676.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:56.716Z,1492141676.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:56.936Z,1492141676.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:57.056Z,1492141677.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:57.541Z,1492141677.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:57.732Z,1492141677.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:57.958Z,1492141677.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:58.136Z,1492141678.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:58.352Z,1492141678.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:58.765Z,1492141678.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:58.932Z,1492141678.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:59.157Z,1492141679.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:59.590Z,1492141679.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:47:59.732Z,1492141679.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:47:59.917Z,1492141679.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:00.136Z,1492141680.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:00.342Z,1492141680.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:00.677Z,1492141680.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:00.932Z,1492141680.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:01.084Z,1492141681.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:01.488Z,1492141681.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:01.728Z,1492141681.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:01.862Z,1492141681.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:02.289Z,1492141682.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:02.526Z,1492141682.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:02.718Z,1492141682.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:02.932Z,1492141682.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:03.066Z,1492141683.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:03.495Z,1492141683.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:03.728Z,1492141683.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:03.900Z,1492141683.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:03.900Z,1492141683.900 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T03:48:03.900Z,1492141683.900 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:48:03.951Z,1492141683.951 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:03.951Z,1492141683.951 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T03:48:03.951Z,1492141683.951 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:48:03.992Z,1492141683.992 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:48:03.992Z,1492141683.992 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:48:04.180Z,1492141684.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:04.345Z,1492141684.345 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:48:04.345Z,1492141684.345 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T03:48:04.346Z,1492141684.346 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:48:04.346Z,1492141684.346 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T03:48:04.692Z,1492141684.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:48:04.693Z,1492141684.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:48:04.693Z,1492141684.693 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:48:04.698Z,1492141684.698 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:48:04.698Z,1492141684.698 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:48:04.699Z,1492141684.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:48:04.978Z,1492141684.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:05.063Z,1492141685.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:05.482Z,1492141685.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:05.772Z,1492141685.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:05.878Z,1492141685.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:06.177Z,1492141686.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:06.257Z,1492141686.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:06.683Z,1492141686.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:06.972Z,1492141686.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:07.066Z,1492141687.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:07.491Z,1492141687.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:07.764Z,1492141687.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:07.873Z,1492141687.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:08.406Z,1492141688.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:08.560Z,1492141688.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:08.726Z,1492141688.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:09.085Z,1492141689.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:09.360Z,1492141689.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:09.525Z,1492141689.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:09.904Z,1492141689.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:09.915Z,1492141689.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:10.311Z,1492141690.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:10.700Z,1492141690.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:10.724Z,1492141690.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:11.075Z,1492141691.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:11.483Z,1492141691.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:11.496Z,1492141691.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:11.848Z,1492141691.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:11.900Z,1492141691.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:12.252Z,1492141692.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:12.696Z,1492141692.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:12.703Z,1492141692.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:13.077Z,1492141693.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:13.477Z,1492141693.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:13.492Z,1492141693.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:13.872Z,1492141693.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:13.900Z,1492141693.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:14.245Z,1492141694.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:14.670Z,1492141694.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:14.696Z,1492141694.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:15.052Z,1492141695.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:15.473Z,1492141695.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:15.492Z,1492141695.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:15.849Z,1492141695.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:16.100Z,1492141696.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:16.252Z,1492141696.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:16.670Z,1492141696.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:16.897Z,1492141696.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:17.059Z,1492141697.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:17.491Z,1492141697.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:17.692Z,1492141697.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:17.858Z,1492141697.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:18.104Z,1492141698.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:18.273Z,1492141698.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:18.664Z,1492141698.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:18.900Z,1492141698.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:19.067Z,1492141699.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:19.463Z,1492141699.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:19.697Z,1492141699.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:20.100Z,1492141700.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:20.896Z,1492141700.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:21.695Z,1492141701.695 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:22.100Z,1492141702.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:22.896Z,1492141702.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:23.448Z,1492141703.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:23.658Z,1492141703.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:23.692Z,1492141703.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:24.021Z,1492141704.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:24.096Z,1492141704.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:24.449Z,1492141704.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:24.796Z,1492141704.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:24.892Z,1492141704.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:25.371Z,1492141705.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:25.650Z,1492141705.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:25.692Z,1492141705.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:26.042Z,1492141706.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:26.096Z,1492141706.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:26.430Z,1492141706.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:26.794Z,1492141706.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:26.892Z,1492141706.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:27.198Z,1492141707.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:27.590Z,1492141707.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:27.688Z,1492141707.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:27.993Z,1492141707.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:28.092Z,1492141708.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:28.388Z,1492141708.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:28.793Z,1492141708.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:28.888Z,1492141708.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:29.194Z,1492141709.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:29.627Z,1492141709.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:29.684Z,1492141709.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:29.989Z,1492141709.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:30.116Z,1492141710.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:30.342Z,1492141710.342 [NAL9602](INFO): SBD MO Status=0, MOMSN=2097, MT Status=0, MTMSN=0
2017-04-14T03:48:30.342Z,1492141710.342 [NAL9602](INFO): No messages in MT queue
2017-04-14T03:48:30.405Z,1492141710.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:30.782Z,1492141710.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:30.912Z,1492141710.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:31.187Z,1492141711.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:31.544Z,1492141711.545 [NAL9602](INFO): GPS fix at 20170414T034832: (36.802279, -121.787192)
2017-04-14T03:48:31.695Z,1492141711.695 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T03:48:31.695Z,1492141711.695 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T03:48:31.708Z,1492141711.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:32.023Z,1492141712.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:32.023Z,1492141712.023 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:48:32.023Z,1492141712.023 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:48:32.039Z,1492141712.039 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:32.039Z,1492141712.039 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:48:32.039Z,1492141712.039 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:48:32.108Z,1492141712.108 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:48:32.108Z,1492141712.108 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:48:32.112Z,1492141712.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:32.609Z,1492141712.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:48:32.609Z,1492141712.609 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:48:32.609Z,1492141712.609 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:48:32.609Z,1492141712.609 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:48:32.908Z,1492141712.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:33.009Z,1492141713.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:48:33.010Z,1492141713.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:48:33.010Z,1492141713.010 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:48:33.018Z,1492141713.018 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:48:33.018Z,1492141713.018 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:48:33.018Z,1492141713.018 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:48:33.704Z,1492141713.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:34.108Z,1492141714.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:34.904Z,1492141714.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:35.700Z,1492141715.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:36.104Z,1492141716.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:36.908Z,1492141716.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:37.704Z,1492141717.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:37.717Z,1492141717.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:37.815Z,1492141717.815 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0020.lzma
2017-04-14T03:48:37.893Z,1492141717.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:38.108Z,1492141718.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:38.259Z,1492141718.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:38.601Z,1492141718.601 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0020.lzma.bak
2017-04-14T03:48:38.601Z,1492141718.601 [DataOverHttps](INFO): SBD MOMSN=4885069
2017-04-14T03:48:38.694Z,1492141718.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:38.904Z,1492141718.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:39.058Z,1492141719.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:39.489Z,1492141719.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:39.700Z,1492141719.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:40.104Z,1492141720.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:40.900Z,1492141720.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:41.696Z,1492141721.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:42.100Z,1492141722.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:42.852Z,1492141722.852 [NAL9602](INFO): Powering down
2017-04-14T03:48:42.896Z,1492141722.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:42.946Z,1492141722.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:43.067Z,1492141723.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:43.422Z,1492141723.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:43.692Z,1492141723.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:43.830Z,1492141723.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:44.096Z,1492141724.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:44.261Z,1492141724.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:44.622Z,1492141724.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:44.894Z,1492141724.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:45.688Z,1492141725.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:46.093Z,1492141726.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:46.888Z,1492141726.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:47.684Z,1492141727.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:48.088Z,1492141728.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:48.884Z,1492141728.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:49.538Z,1492141729.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:49.627Z,1492141729.626 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0021.lzma
2017-04-14T03:48:49.680Z,1492141729.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:49.740Z,1492141729.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:50.084Z,1492141730.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:50.108Z,1492141730.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:50.429Z,1492141730.429 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0021.lzma.bak
2017-04-14T03:48:50.430Z,1492141730.430 [DataOverHttps](INFO): SBD MOMSN=4885072
2017-04-14T03:48:50.490Z,1492141730.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:50.880Z,1492141730.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:50.928Z,1492141730.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:50.937Z,1492141730.937 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T03:48:50.937Z,1492141730.937 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T03:48:50.937Z,1492141730.937 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:48:51.369Z,1492141731.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:51.676Z,1492141731.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:52.080Z,1492141732.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:52.876Z,1492141732.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:53.672Z,1492141733.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:54.076Z,1492141734.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:54.872Z,1492141734.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:55.018Z,1492141735.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:55.149Z,1492141735.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:55.531Z,1492141735.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:55.668Z,1492141735.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:55.917Z,1492141735.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:56.072Z,1492141736.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:56.339Z,1492141736.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:56.710Z,1492141736.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:56.868Z,1492141736.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:57.131Z,1492141737.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:57.510Z,1492141737.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:57.664Z,1492141737.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:57.902Z,1492141737.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:58.068Z,1492141738.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:58.324Z,1492141738.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:58.696Z,1492141738.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:58.864Z,1492141738.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:59.102Z,1492141739.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:59.500Z,1492141739.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:48:59.660Z,1492141739.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:48:59.933Z,1492141739.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:00.064Z,1492141740.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:00.305Z,1492141740.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:00.701Z,1492141740.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:00.860Z,1492141740.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:01.104Z,1492141741.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:01.510Z,1492141741.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:01.656Z,1492141741.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:01.909Z,1492141741.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:02.060Z,1492141742.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:02.308Z,1492141742.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:02.713Z,1492141742.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:02.856Z,1492141742.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:03.105Z,1492141743.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:03.505Z,1492141743.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:03.652Z,1492141743.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:03.910Z,1492141743.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:04.056Z,1492141744.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:04.312Z,1492141744.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:04.709Z,1492141744.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:04.852Z,1492141744.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:05.114Z,1492141745.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:05.517Z,1492141745.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:05.648Z,1492141745.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:05.918Z,1492141745.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:06.052Z,1492141746.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:06.317Z,1492141746.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:06.714Z,1492141746.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:06.848Z,1492141746.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:07.118Z,1492141747.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:07.506Z,1492141747.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:07.644Z,1492141747.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:07.919Z,1492141747.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:08.048Z,1492141748.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:08.322Z,1492141748.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:08.734Z,1492141748.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:08.844Z,1492141748.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:09.144Z,1492141749.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:09.520Z,1492141749.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:09.640Z,1492141749.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:09.964Z,1492141749.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:10.044Z,1492141750.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:10.320Z,1492141750.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:10.740Z,1492141750.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:10.840Z,1492141750.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:11.125Z,1492141751.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:11.594Z,1492141751.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:11.640Z,1492141751.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:11.914Z,1492141751.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:12.056Z,1492141752.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:12.306Z,1492141752.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:12.718Z,1492141752.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:12.852Z,1492141752.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:13.116Z,1492141753.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:13.510Z,1492141753.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:13.648Z,1492141753.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:13.923Z,1492141753.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:14.052Z,1492141754.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:14.322Z,1492141754.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:14.721Z,1492141754.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:14.850Z,1492141754.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:15.122Z,1492141755.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:15.497Z,1492141755.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:15.644Z,1492141755.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:15.906Z,1492141755.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:16.048Z,1492141756.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:16.351Z,1492141756.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:16.736Z,1492141756.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:16.844Z,1492141756.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:17.103Z,1492141757.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:17.514Z,1492141757.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:17.640Z,1492141757.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:17.917Z,1492141757.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:18.044Z,1492141758.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:18.308Z,1492141758.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:18.706Z,1492141758.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:18.840Z,1492141758.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:19.142Z,1492141759.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:19.508Z,1492141759.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:19.638Z,1492141759.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:19.978Z,1492141759.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:20.044Z,1492141760.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:20.318Z,1492141760.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:20.721Z,1492141760.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:20.840Z,1492141760.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:21.140Z,1492141761.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:21.515Z,1492141761.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:21.638Z,1492141761.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:21.923Z,1492141761.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:22.052Z,1492141762.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:22.354Z,1492141762.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:22.712Z,1492141762.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:22.848Z,1492141762.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:23.116Z,1492141763.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:23.595Z,1492141763.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:23.644Z,1492141763.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:23.926Z,1492141763.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:24.048Z,1492141764.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:24.327Z,1492141764.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:24.700Z,1492141764.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:24.845Z,1492141764.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:25.138Z,1492141765.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:25.575Z,1492141765.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:25.597Z,1492141765.597 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:25.597Z,1492141765.597 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:49:25.597Z,1492141765.597 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:49:25.644Z,1492141765.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:25.653Z,1492141765.653 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:49:25.906Z,1492141765.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:25.925Z,1492141765.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:49:25.925Z,1492141765.925 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:49:26.049Z,1492141766.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:26.307Z,1492141766.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:26.313Z,1492141766.313 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:49:26.313Z,1492141766.313 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:49:26.314Z,1492141766.314 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:49:26.710Z,1492141766.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:26.844Z,1492141766.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:27.107Z,1492141767.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:27.576Z,1492141767.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:27.640Z,1492141767.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:27.906Z,1492141767.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:28.044Z,1492141768.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:28.304Z,1492141768.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:28.704Z,1492141768.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:29.108Z,1492141769.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:29.502Z,1492141769.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:29.911Z,1492141769.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:30.308Z,1492141770.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:30.725Z,1492141770.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:31.109Z,1492141771.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:31.521Z,1492141771.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:31.902Z,1492141771.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:32.297Z,1492141772.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:32.728Z,1492141772.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:33.104Z,1492141773.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:33.512Z,1492141773.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:33.916Z,1492141773.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:34.318Z,1492141774.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:34.714Z,1492141774.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:35.114Z,1492141775.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:35.517Z,1492141775.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:35.927Z,1492141775.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:36.327Z,1492141776.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:36.702Z,1492141776.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:37.104Z,1492141777.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:37.580Z,1492141777.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:37.906Z,1492141777.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:38.307Z,1492141778.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:38.740Z,1492141778.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:39.110Z,1492141779.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:39.632Z,1492141779.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:39.950Z,1492141779.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:40.304Z,1492141780.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:40.712Z,1492141780.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:41.116Z,1492141781.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:41.658Z,1492141781.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:41.942Z,1492141781.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:42.310Z,1492141782.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:42.707Z,1492141782.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:43.127Z,1492141783.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:43.502Z,1492141783.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:43.922Z,1492141783.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:44.303Z,1492141784.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:44.705Z,1492141784.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:45.101Z,1492141785.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:45.512Z,1492141785.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:45.923Z,1492141785.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:46.297Z,1492141786.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:46.706Z,1492141786.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:47.118Z,1492141787.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:47.518Z,1492141787.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:47.917Z,1492141787.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:48.322Z,1492141788.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:48.719Z,1492141788.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:49.118Z,1492141789.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:49.531Z,1492141789.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:49.905Z,1492141789.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:50.312Z,1492141790.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:50.718Z,1492141790.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:51.113Z,1492141791.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:51.510Z,1492141791.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:52.460Z,1492141792.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:53.256Z,1492141793.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:49:55.205Z,1492141795.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:55.365Z,1492141795.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:55.742Z,1492141795.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:56.166Z,1492141796.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:56.543Z,1492141796.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:57.007Z,1492141797.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:57.427Z,1492141797.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:57.753Z,1492141797.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:58.158Z,1492141798.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:58.567Z,1492141798.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:58.964Z,1492141798.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:59.353Z,1492141799.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:49:59.738Z,1492141799.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:00.145Z,1492141800.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:00.549Z,1492141800.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:00.949Z,1492141800.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:01.349Z,1492141801.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:01.763Z,1492141801.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:02.150Z,1492141802.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:02.561Z,1492141802.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:02.961Z,1492141802.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:03.357Z,1492141803.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:03.751Z,1492141803.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:04.163Z,1492141804.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:04.550Z,1492141804.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:04.961Z,1492141804.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:05.350Z,1492141805.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:05.729Z,1492141805.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:05.750Z,1492141805.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:06.121Z,1492141806.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:06.162Z,1492141806.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:06.522Z,1492141806.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:06.574Z,1492141806.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:06.929Z,1492141806.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:06.957Z,1492141806.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:07.344Z,1492141807.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:07.372Z,1492141807.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:07.721Z,1492141807.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:07.742Z,1492141807.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:08.122Z,1492141808.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:08.137Z,1492141808.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:08.528Z,1492141808.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:08.544Z,1492141808.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:08.937Z,1492141808.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:08.979Z,1492141808.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:09.335Z,1492141809.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:09.393Z,1492141809.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:09.729Z,1492141809.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:09.802Z,1492141809.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:10.129Z,1492141810.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:10.164Z,1492141810.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:10.521Z,1492141810.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:10.557Z,1492141810.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:10.925Z,1492141810.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:10.957Z,1492141810.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:11.321Z,1492141811.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:11.406Z,1492141811.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:11.721Z,1492141811.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:11.758Z,1492141811.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:12.118Z,1492141812.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:12.163Z,1492141812.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:12.525Z,1492141812.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:12.597Z,1492141812.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:12.924Z,1492141812.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:12.958Z,1492141812.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:13.321Z,1492141813.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:13.358Z,1492141813.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:13.733Z,1492141813.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:13.760Z,1492141813.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:14.121Z,1492141814.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:14.157Z,1492141814.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:14.525Z,1492141814.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:14.557Z,1492141814.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:14.947Z,1492141814.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:14.964Z,1492141814.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:15.329Z,1492141815.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:15.356Z,1492141815.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:15.729Z,1492141815.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:15.770Z,1492141815.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:16.131Z,1492141816.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:16.146Z,1492141816.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:16.538Z,1492141816.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:16.554Z,1492141816.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:16.925Z,1492141816.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:16.941Z,1492141816.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:17.329Z,1492141817.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:17.350Z,1492141817.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:17.729Z,1492141817.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:17.783Z,1492141817.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:18.129Z,1492141818.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:18.145Z,1492141818.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:18.528Z,1492141818.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:18.556Z,1492141818.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:18.923Z,1492141818.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:18.961Z,1492141818.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:19.321Z,1492141819.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:19.347Z,1492141819.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:19.741Z,1492141819.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:19.760Z,1492141819.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:20.137Z,1492141820.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:20.152Z,1492141820.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:20.521Z,1492141820.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:20.548Z,1492141820.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:20.921Z,1492141820.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:20.948Z,1492141820.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:21.321Z,1492141821.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:21.358Z,1492141821.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:21.721Z,1492141821.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:21.758Z,1492141821.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:22.125Z,1492141822.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:22.158Z,1492141822.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:22.521Z,1492141822.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:22.557Z,1492141822.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:22.919Z,1492141822.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:22.984Z,1492141822.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:23.322Z,1492141823.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:23.338Z,1492141823.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:23.730Z,1492141823.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:23.739Z,1492141823.739 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T03:50:23.739Z,1492141823.739 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:50:23.739Z,1492141823.739 [BPC1](ERROR): Data Fault
2017-04-14T03:50:23.783Z,1492141823.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:23.821Z,1492141823.820 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:50:24.131Z,1492141824.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:24.160Z,1492141824.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:24.529Z,1492141824.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:24.550Z,1492141824.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:24.930Z,1492141824.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:24.945Z,1492141824.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:25.004Z,1492141825.004 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:50:25.004Z,1492141825.004 [BPC1] No Fault, FailCount= 1
2017-04-14T03:50:25.331Z,1492141825.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:25.406Z,1492141825.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:25.728Z,1492141825.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:25.750Z,1492141825.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:26.131Z,1492141826.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:26.184Z,1492141826.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:26.531Z,1492141826.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:26.547Z,1492141826.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:26.930Z,1492141826.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:26.959Z,1492141826.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:27.322Z,1492141827.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:27.401Z,1492141827.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:27.721Z,1492141827.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:27.765Z,1492141827.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:28.121Z,1492141828.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:28.161Z,1492141828.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:28.521Z,1492141828.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:28.560Z,1492141828.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:28.720Z,1492141828.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:28.921Z,1492141828.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:28.953Z,1492141828.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:29.352Z,1492141829.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:29.373Z,1492141829.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:29.516Z,1492141829.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:29.721Z,1492141829.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:29.754Z,1492141829.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:29.920Z,1492141829.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:30.118Z,1492141830.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:30.142Z,1492141830.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:30.529Z,1492141830.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:30.578Z,1492141830.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:30.716Z,1492141830.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:30.932Z,1492141830.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:30.961Z,1492141830.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:31.321Z,1492141831.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:31.358Z,1492141831.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:31.512Z,1492141831.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:31.796Z,1492141831.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:31.828Z,1492141831.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:31.928Z,1492141831.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:32.138Z,1492141832.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:32.194Z,1492141832.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:32.543Z,1492141832.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:32.567Z,1492141832.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:32.724Z,1492141832.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:33.237Z,1492141833.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:33.560Z,1492141833.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:33.667Z,1492141833.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:33.965Z,1492141833.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:34.003Z,1492141834.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:34.321Z,1492141834.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:34.757Z,1492141834.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:35.228Z,1492141835.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:35.555Z,1492141835.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:35.916Z,1492141835.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:36.298Z,1492141836.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:36.723Z,1492141836.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:37.092Z,1492141837.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:37.517Z,1492141837.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:37.918Z,1492141837.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:38.318Z,1492141838.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:38.697Z,1492141838.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:39.207Z,1492141839.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:39.504Z,1492141839.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:39.953Z,1492141839.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:40.322Z,1492141840.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:40.705Z,1492141840.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:41.167Z,1492141841.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:41.499Z,1492141841.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:41.901Z,1492141841.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:42.301Z,1492141842.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:42.677Z,1492141842.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:43.184Z,1492141843.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:43.502Z,1492141843.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:43.892Z,1492141843.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:44.288Z,1492141844.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:44.700Z,1492141844.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:45.175Z,1492141845.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:45.497Z,1492141845.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:45.904Z,1492141845.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:46.278Z,1492141846.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:46.680Z,1492141846.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:47.173Z,1492141847.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:47.493Z,1492141847.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:47.892Z,1492141847.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:48.304Z,1492141848.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:48.710Z,1492141848.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:49.134Z,1492141849.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:49.580Z,1492141849.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:49.908Z,1492141849.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:50.004Z,1492141850.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:50.314Z,1492141850.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:50.408Z,1492141850.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:50.718Z,1492141850.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:51.109Z,1492141851.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:51.511Z,1492141851.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:51.946Z,1492141851.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:55.751Z,1492141855.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:55.886Z,1492141855.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:56.258Z,1492141856.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:56.641Z,1492141856.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:56.697Z,1492141856.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:57.117Z,1492141857.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:57.150Z,1492141857.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:57.429Z,1492141857.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:50:57.513Z,1492141857.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:57.880Z,1492141857.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:58.257Z,1492141858.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:58.660Z,1492141858.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:59.143Z,1492141859.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:59.482Z,1492141859.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:50:59.857Z,1492141859.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:00.252Z,1492141860.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:00.661Z,1492141860.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:01.081Z,1492141861.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:01.448Z,1492141861.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:01.852Z,1492141861.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:02.258Z,1492141862.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:02.651Z,1492141862.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:03.056Z,1492141863.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:03.505Z,1492141863.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:03.856Z,1492141863.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:04.303Z,1492141864.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:04.678Z,1492141864.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:05.049Z,1492141865.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:05.534Z,1492141865.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:05.876Z,1492141865.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:06.258Z,1492141866.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:06.654Z,1492141866.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:07.148Z,1492141867.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:07.461Z,1492141867.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:07.866Z,1492141867.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:08.270Z,1492141868.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:08.671Z,1492141868.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:09.140Z,1492141869.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:09.447Z,1492141869.447 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T03:51:09.447Z,1492141869.447 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:51:09.447Z,1492141869.447 [BPC1](ERROR): Data Fault
2017-04-14T03:51:09.456Z,1492141869.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:09.513Z,1492141869.513 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:51:09.857Z,1492141869.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:10.253Z,1492141870.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:10.658Z,1492141870.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:10.694Z,1492141870.694 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:51:10.694Z,1492141870.694 [BPC1] No Fault, FailCount= 1
2017-04-14T03:51:11.198Z,1492141871.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:11.499Z,1492141871.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:11.859Z,1492141871.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:12.255Z,1492141872.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:12.662Z,1492141872.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:13.152Z,1492141873.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:13.467Z,1492141873.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:13.843Z,1492141873.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:14.247Z,1492141874.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:14.654Z,1492141874.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:15.109Z,1492141875.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:15.458Z,1492141875.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:15.852Z,1492141875.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:16.252Z,1492141876.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:16.696Z,1492141876.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:17.061Z,1492141877.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:17.462Z,1492141877.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:17.864Z,1492141877.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:18.274Z,1492141878.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:18.672Z,1492141878.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:19.050Z,1492141879.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:19.550Z,1492141879.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:19.892Z,1492141879.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:20.263Z,1492141880.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:20.662Z,1492141880.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:21.135Z,1492141881.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:21.508Z,1492141881.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:21.928Z,1492141881.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:22.250Z,1492141882.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:22.680Z,1492141882.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:23.154Z,1492141883.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:23.623Z,1492141883.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:23.906Z,1492141883.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:24.307Z,1492141884.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:24.842Z,1492141884.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:25.199Z,1492141885.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:25.557Z,1492141885.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:26.002Z,1492141886.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:26.370Z,1492141886.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:26.793Z,1492141886.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:27.132Z,1492141887.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:27.514Z,1492141887.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:27.923Z,1492141887.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:28.317Z,1492141888.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:28.806Z,1492141888.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:29.150Z,1492141889.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:29.561Z,1492141889.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:29.939Z,1492141889.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:30.338Z,1492141890.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:30.725Z,1492141890.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:31.124Z,1492141891.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:31.640Z,1492141891.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:32.013Z,1492141892.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:32.340Z,1492141892.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:32.829Z,1492141892.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:33.246Z,1492141893.246 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:33.246Z,1492141893.246 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T03:51:33.246Z,1492141893.246 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:51:33.368Z,1492141893.368 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:33.368Z,1492141893.368 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T03:51:33.368Z,1492141893.368 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:51:33.512Z,1492141893.512 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:51:33.512Z,1492141893.512 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:51:33.840Z,1492141893.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:51:33.840Z,1492141893.840 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T03:51:33.841Z,1492141893.841 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:51:33.841Z,1492141893.841 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T03:51:34.020Z,1492141894.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:51:34.020Z,1492141894.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:51:34.020Z,1492141894.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:51:34.041Z,1492141894.041 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:51:34.042Z,1492141894.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:51:34.042Z,1492141894.042 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:51:34.449Z,1492141894.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:34.809Z,1492141894.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:35.200Z,1492141895.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:35.596Z,1492141895.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:35.971Z,1492141895.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:36.379Z,1492141896.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:36.782Z,1492141896.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:37.230Z,1492141897.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:37.630Z,1492141897.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:38.118Z,1492141898.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:38.423Z,1492141898.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:38.806Z,1492141898.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:39.250Z,1492141899.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:39.578Z,1492141899.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:40.010Z,1492141900.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:40.417Z,1492141900.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:40.770Z,1492141900.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:41.174Z,1492141901.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:41.591Z,1492141901.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:41.984Z,1492141901.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:42.395Z,1492141902.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:42.794Z,1492141902.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:43.186Z,1492141903.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:43.574Z,1492141903.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:43.979Z,1492141903.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:44.300Z,1492141904.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:51:44.527Z,1492141904.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:44.791Z,1492141904.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:45.096Z,1492141905.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:51:45.219Z,1492141905.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:45.592Z,1492141905.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:46.057Z,1492141906.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:46.412Z,1492141906.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:46.770Z,1492141906.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:47.202Z,1492141907.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:47.594Z,1492141907.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:47.993Z,1492141907.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:48.373Z,1492141908.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:48.771Z,1492141908.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:49.174Z,1492141909.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:49.577Z,1492141909.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:49.981Z,1492141909.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:50.386Z,1492141910.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:50.791Z,1492141910.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:51.183Z,1492141911.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:51.570Z,1492141911.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:51.987Z,1492141911.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:55.754Z,1492141915.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:55.892Z,1492141915.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:56.270Z,1492141916.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:56.714Z,1492141916.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:57.120Z,1492141917.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:57.514Z,1492141917.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:57.911Z,1492141917.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:58.269Z,1492141918.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:58.683Z,1492141918.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:59.214Z,1492141919.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:59.491Z,1492141919.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:51:59.864Z,1492141919.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:00.262Z,1492141920.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:00.688Z,1492141920.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:01.062Z,1492141921.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:01.464Z,1492141921.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:01.879Z,1492141921.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:02.265Z,1492141922.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:02.668Z,1492141922.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:03.073Z,1492141923.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:03.478Z,1492141923.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:03.909Z,1492141923.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:04.277Z,1492141924.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:04.704Z,1492141924.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:05.102Z,1492141925.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:05.469Z,1492141925.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:05.901Z,1492141925.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:06.267Z,1492141926.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:06.669Z,1492141926.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:07.070Z,1492141927.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:07.474Z,1492141927.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:07.868Z,1492141927.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:08.318Z,1492141928.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:08.689Z,1492141928.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:09.085Z,1492141929.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:09.502Z,1492141929.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:09.892Z,1492141929.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:10.326Z,1492141930.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:10.713Z,1492141930.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:11.129Z,1492141931.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:11.513Z,1492141931.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:11.533Z,1492141931.533 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T03:52:11.878Z,1492141931.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:12.310Z,1492141932.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:12.714Z,1492141932.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:13.069Z,1492141933.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:13.478Z,1492141933.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:13.870Z,1492141933.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:14.273Z,1492141934.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:14.676Z,1492141934.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:15.068Z,1492141935.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:15.478Z,1492141935.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:15.869Z,1492141935.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:16.270Z,1492141936.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:16.669Z,1492141936.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:17.070Z,1492141937.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:17.470Z,1492141937.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:17.876Z,1492141937.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:18.256Z,1492141938.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:18.734Z,1492141938.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:19.149Z,1492141939.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:19.468Z,1492141939.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:19.916Z,1492141939.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:20.278Z,1492141940.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:20.701Z,1492141940.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:21.095Z,1492141941.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:21.463Z,1492141941.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:21.863Z,1492141941.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:22.270Z,1492141942.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:22.721Z,1492141942.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:23.076Z,1492141943.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:23.519Z,1492141943.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:23.881Z,1492141943.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:24.311Z,1492141944.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:25.001Z,1492141945.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:25.498Z,1492141945.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:25.732Z,1492141945.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:26.142Z,1492141946.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:26.526Z,1492141946.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:26.558Z,1492141946.557 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:26.558Z,1492141946.558 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T03:52:26.558Z,1492141946.558 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:52:26.637Z,1492141946.637 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:52:26.982Z,1492141946.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:27.154Z,1492141947.154 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:52:27.154Z,1492141947.154 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T03:52:27.414Z,1492141947.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:27.465Z,1492141947.465 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:52:27.465Z,1492141947.465 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:52:27.466Z,1492141947.466 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:52:27.883Z,1492141947.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:28.177Z,1492141948.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:28.565Z,1492141948.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:28.944Z,1492141948.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:29.365Z,1492141949.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:29.724Z,1492141949.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:30.130Z,1492141950.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:30.510Z,1492141950.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:30.984Z,1492141950.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:31.301Z,1492141951.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:31.709Z,1492141951.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:32.105Z,1492141952.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:32.536Z,1492141952.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:33.007Z,1492141953.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:33.312Z,1492141953.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:33.748Z,1492141953.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:34.102Z,1492141954.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:34.526Z,1492141954.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:35.036Z,1492141955.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:35.326Z,1492141955.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:35.752Z,1492141955.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:36.134Z,1492141956.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:36.526Z,1492141956.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:36.998Z,1492141956.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:37.308Z,1492141957.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:37.704Z,1492141957.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:38.116Z,1492141958.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:38.506Z,1492141958.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:38.991Z,1492141958.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:39.327Z,1492141959.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:39.768Z,1492141959.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:40.119Z,1492141960.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:40.542Z,1492141960.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:40.909Z,1492141960.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:41.360Z,1492141961.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:41.722Z,1492141961.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:41.808Z,1492141961.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:52:42.130Z,1492141962.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:42.518Z,1492141962.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:42.604Z,1492141962.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:52:42.901Z,1492141962.901 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:52:42.901Z,1492141962.901 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:52:42.902Z,1492141962.902 [BPC1](ERROR): Communications Fault
2017-04-14T03:52:42.918Z,1492141962.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:42.992Z,1492141962.992 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:52:43.349Z,1492141963.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:43.721Z,1492141963.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:44.157Z,1492141964.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:44.194Z,1492141964.194 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:52:44.194Z,1492141964.194 [BPC1] No Fault, FailCount= 1
2017-04-14T03:52:44.670Z,1492141964.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:45.136Z,1492141965.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:45.418Z,1492141965.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:45.777Z,1492141965.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:46.246Z,1492141966.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:46.553Z,1492141966.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:46.982Z,1492141966.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:47.345Z,1492141967.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:47.844Z,1492141967.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:48.206Z,1492141968.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:48.556Z,1492141968.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:49.001Z,1492141969.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:49.340Z,1492141969.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:49.706Z,1492141969.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:50.123Z,1492141970.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:50.526Z,1492141970.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:51.034Z,1492141971.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:51.327Z,1492141971.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:51.722Z,1492141971.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:52.142Z,1492141972.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:55.677Z,1492141975.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:55.684Z,1492141975.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:52:55.806Z,1492141975.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:56.230Z,1492141976.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:56.480Z,1492141976.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:52:56.637Z,1492141976.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:57.002Z,1492141977.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:57.410Z,1492141977.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:57.809Z,1492141977.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:58.218Z,1492141978.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:58.621Z,1492141978.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:59.101Z,1492141979.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:59.402Z,1492141979.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:52:59.798Z,1492141979.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:00.202Z,1492141980.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:00.601Z,1492141980.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:01.010Z,1492141981.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:01.412Z,1492141981.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:01.800Z,1492141981.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:02.215Z,1492141982.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:02.613Z,1492141982.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:03.095Z,1492141983.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:03.407Z,1492141983.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:03.797Z,1492141983.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:04.201Z,1492141984.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:04.670Z,1492141984.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:04.999Z,1492141984.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:05.445Z,1492141985.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:05.810Z,1492141985.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:06.214Z,1492141986.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:06.615Z,1492141986.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:07.012Z,1492141987.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:07.410Z,1492141987.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:07.809Z,1492141987.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:08.208Z,1492141988.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:08.610Z,1492141988.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:09.012Z,1492141989.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:09.409Z,1492141989.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:09.829Z,1492141989.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:10.182Z,1492141990.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:10.588Z,1492141990.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:10.994Z,1492141990.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:11.434Z,1492141991.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:11.790Z,1492141991.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:12.222Z,1492141992.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:12.595Z,1492141992.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:12.998Z,1492141992.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:13.399Z,1492141993.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:13.845Z,1492141993.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:14.200Z,1492141994.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:14.610Z,1492141994.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:15.009Z,1492141995.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:15.408Z,1492141995.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:15.861Z,1492141995.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:16.216Z,1492141996.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:16.598Z,1492141996.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:16.999Z,1492141996.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:17.454Z,1492141997.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:17.802Z,1492141997.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:18.207Z,1492141998.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:18.650Z,1492141998.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:19.042Z,1492141999.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:19.467Z,1492141999.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:19.839Z,1492141999.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:20.199Z,1492142000.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:20.646Z,1492142000.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:21.098Z,1492142001.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:21.407Z,1492142001.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:21.799Z,1492142001.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:22.210Z,1492142002.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:22.606Z,1492142002.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:23.004Z,1492142003.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:23.402Z,1492142003.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:23.799Z,1492142003.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:24.206Z,1492142004.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:24.605Z,1492142004.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:25.005Z,1492142005.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:25.412Z,1492142005.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:25.797Z,1492142005.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:26.202Z,1492142006.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:26.603Z,1492142006.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:27.005Z,1492142007.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:27.417Z,1492142007.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:27.822Z,1492142007.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:28.228Z,1492142008.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:28.594Z,1492142008.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:29.018Z,1492142009.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:29.393Z,1492142009.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:29.796Z,1492142009.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:30.228Z,1492142010.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:30.611Z,1492142010.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:31.039Z,1492142011.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:31.422Z,1492142011.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:31.824Z,1492142011.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:32.202Z,1492142012.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:32.638Z,1492142012.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:33.014Z,1492142013.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:33.400Z,1492142013.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:33.816Z,1492142013.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:34.193Z,1492142014.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:34.596Z,1492142014.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:34.994Z,1492142014.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:35.406Z,1492142015.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:35.803Z,1492142015.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:36.196Z,1492142016.196 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:53:36.196Z,1492142016.196 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:53:36.196Z,1492142016.196 [BPC1](ERROR): Communications Fault
2017-04-14T03:53:36.205Z,1492142016.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:36.271Z,1492142016.271 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:53:36.606Z,1492142016.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:37.003Z,1492142017.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:37.399Z,1492142017.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:37.419Z,1492142017.419 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:53:37.419Z,1492142017.419 [BPC1] No Fault, FailCount= 1
2017-04-14T03:53:37.860Z,1492142017.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:38.223Z,1492142018.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:38.610Z,1492142018.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:39.002Z,1492142019.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:39.410Z,1492142019.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:39.810Z,1492142019.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:40.190Z,1492142020.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:40.632Z,1492142020.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:40.998Z,1492142020.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:41.385Z,1492142021.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:41.792Z,1492142021.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:42.190Z,1492142022.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:42.593Z,1492142022.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:43.015Z,1492142023.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:43.394Z,1492142023.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:43.830Z,1492142023.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:44.202Z,1492142024.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:44.626Z,1492142024.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:45.034Z,1492142025.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:45.402Z,1492142025.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:45.801Z,1492142025.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:46.201Z,1492142026.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:46.597Z,1492142026.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:47.002Z,1492142027.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:47.402Z,1492142027.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:47.798Z,1492142027.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:48.201Z,1492142028.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:48.609Z,1492142028.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:49.014Z,1492142029.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:49.394Z,1492142029.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:49.809Z,1492142029.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:50.209Z,1492142030.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:50.610Z,1492142030.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:51.014Z,1492142031.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:51.428Z,1492142031.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:51.440Z,1492142031.440 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T03:53:51.440Z,1492142031.440 [Default:CheckIn:C.Wait] Stopped
2017-04-14T03:53:51.440Z,1492142031.440 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T03:53:51.440Z,1492142031.441 [Default:CheckIn:D] Running Loop=1
2017-04-14T03:53:51.798Z,1492142031.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:51.807Z,1492142031.807 [Default:CheckIn:D] Stopped
2017-04-14T03:53:51.807Z,1492142031.807 [Default:CheckIn:E] Running Loop=1
2017-04-14T03:53:52.202Z,1492142032.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:52.211Z,1492142032.211 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 27.774799 min 
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn:E] Stopped
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn] Stopped
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn](INFO): Running loop #5
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn] Running Loop=5
2017-04-14T03:53:52.212Z,1492142032.212 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T03:53:52.213Z,1492142032.213 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T03:53:56.337Z,1492142036.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:56.449Z,1492142036.449 [NAL9602](INFO): Powering up
2017-04-14T03:53:56.522Z,1492142036.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:56.909Z,1492142036.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:57.294Z,1492142037.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:57.641Z,1492142037.641 [PNI_TCM](ERROR): CRC does not match. Expected:0x51755 got:0x44672
2017-04-14T03:53:57.674Z,1492142037.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:58.079Z,1492142038.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:58.490Z,1492142038.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:58.943Z,1492142038.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:59.277Z,1492142039.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:53:59.666Z,1492142039.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:00.072Z,1492142040.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:00.454Z,1492142040.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:00.879Z,1492142040.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:01.252Z,1492142041.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:01.671Z,1492142041.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:02.051Z,1492142042.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:02.450Z,1492142042.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:02.900Z,1492142042.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:03.265Z,1492142043.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:03.667Z,1492142043.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:04.050Z,1492142044.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:04.449Z,1492142044.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:04.853Z,1492142044.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:05.249Z,1492142045.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:05.658Z,1492142045.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:06.060Z,1492142046.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:06.461Z,1492142046.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:06.893Z,1492142046.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:07.291Z,1492142047.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:07.610Z,1492142047.610 [NAL9602](INFO): NAL9602 initialized
2017-04-14T03:54:07.683Z,1492142047.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:08.066Z,1492142048.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:08.465Z,1492142048.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:08.874Z,1492142048.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:09.345Z,1492142049.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:09.686Z,1492142049.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:10.086Z,1492142050.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:10.465Z,1492142050.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:10.906Z,1492142050.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:11.290Z,1492142051.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:11.658Z,1492142051.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:12.054Z,1492142052.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:12.454Z,1492142052.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:12.873Z,1492142052.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:13.254Z,1492142053.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:13.660Z,1492142053.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:14.062Z,1492142054.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:14.472Z,1492142054.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:14.949Z,1492142054.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:15.271Z,1492142055.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:15.658Z,1492142055.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:16.058Z,1492142056.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:16.464Z,1492142056.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:16.897Z,1492142056.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:17.293Z,1492142057.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:17.684Z,1492142057.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:18.082Z,1492142058.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:18.467Z,1492142058.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:18.859Z,1492142058.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:19.265Z,1492142059.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:19.664Z,1492142059.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:20.092Z,1492142060.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:20.441Z,1492142060.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:20.862Z,1492142060.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:21.247Z,1492142061.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:21.709Z,1492142061.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:22.110Z,1492142062.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:22.458Z,1492142062.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:22.890Z,1492142062.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:23.263Z,1492142063.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:23.698Z,1492142063.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:24.089Z,1492142064.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:24.463Z,1492142064.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:24.860Z,1492142064.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:25.252Z,1492142065.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:25.666Z,1492142065.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:26.056Z,1492142066.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:26.463Z,1492142066.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:26.888Z,1492142066.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:27.290Z,1492142067.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:27.655Z,1492142067.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:28.115Z,1492142068.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:28.462Z,1492142068.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:28.867Z,1492142068.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:29.278Z,1492142069.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:29.678Z,1492142069.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:30.066Z,1492142070.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:30.471Z,1492142070.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:30.892Z,1492142070.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:31.265Z,1492142071.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:31.670Z,1492142071.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:32.130Z,1492142072.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:32.469Z,1492142072.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:32.891Z,1492142072.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:33.259Z,1492142073.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:33.678Z,1492142073.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:34.065Z,1492142074.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:34.065Z,1492142074.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T03:54:34.065Z,1492142074.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:54:34.076Z,1492142074.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:34.076Z,1492142074.076 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T03:54:34.076Z,1492142074.076 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:54:34.136Z,1492142074.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:54:34.136Z,1492142074.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:54:34.530Z,1492142074.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:54:34.530Z,1492142074.530 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T03:54:34.531Z,1492142074.531 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:54:34.531Z,1492142074.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T03:54:34.872Z,1492142074.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:54:34.873Z,1492142074.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:54:34.873Z,1492142074.873 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:54:34.886Z,1492142074.886 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:54:34.886Z,1492142074.886 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:54:34.891Z,1492142074.891 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:54:35.286Z,1492142075.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:35.687Z,1492142075.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:36.089Z,1492142076.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:36.486Z,1492142076.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:36.860Z,1492142076.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:37.277Z,1492142077.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:37.659Z,1492142077.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:38.041Z,1492142078.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:38.440Z,1492142078.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:38.842Z,1492142078.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:39.323Z,1492142079.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:39.647Z,1492142079.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:40.050Z,1492142080.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:40.463Z,1492142080.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:40.859Z,1492142080.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:41.261Z,1492142081.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:41.664Z,1492142081.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:42.054Z,1492142082.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:42.450Z,1492142082.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:42.866Z,1492142082.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:43.258Z,1492142083.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:43.654Z,1492142083.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:44.056Z,1492142084.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:44.464Z,1492142084.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:44.868Z,1492142084.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:45.256Z,1492142085.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:45.662Z,1492142085.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:46.061Z,1492142086.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:46.457Z,1492142086.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:46.886Z,1492142086.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:47.290Z,1492142087.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:47.671Z,1492142087.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:48.082Z,1492142088.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:48.446Z,1492142088.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:48.874Z,1492142088.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:49.278Z,1492142089.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:49.645Z,1492142089.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:50.043Z,1492142090.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:50.495Z,1492142090.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:50.845Z,1492142090.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:51.253Z,1492142091.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:51.654Z,1492142091.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:52.006Z,1492142092.006 [NAL9602](INFO): SBD MO Status=0, MOMSN=2098, MT Status=0, MTMSN=0
2017-04-14T03:54:52.006Z,1492142092.006 [NAL9602](INFO): No messages in MT queue
2017-04-14T03:54:52.069Z,1492142092.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:52.451Z,1492142092.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:57.273Z,1492142097.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:57.414Z,1492142097.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:57.757Z,1492142097.757 [NAL9602](INFO): GPS fix at 20170414T035459: (36.802336, -121.787158)
2017-04-14T03:54:57.839Z,1492142097.839 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T03:54:57.839Z,1492142097.839 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T03:54:58.214Z,1492142098.214 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:58.214Z,1492142098.214 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T03:54:58.214Z,1492142098.214 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:54:58.222Z,1492142098.222 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:54:58.222Z,1492142098.222 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T03:54:58.222Z,1492142098.222 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:54:58.254Z,1492142098.254 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:54:58.254Z,1492142098.254 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:54:58.650Z,1492142098.650 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:54:58.650Z,1492142098.650 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T03:54:58.651Z,1492142098.651 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:54:58.651Z,1492142098.651 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T03:54:59.025Z,1492142099.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:54:59.026Z,1492142099.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:54:59.026Z,1492142099.026 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:54:59.044Z,1492142099.044 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:54:59.044Z,1492142099.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:54:59.044Z,1492142099.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:55:02.610Z,1492142102.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:02.692Z,1492142102.692 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0024.lzma
2017-04-14T03:55:02.763Z,1492142102.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:03.147Z,1492142103.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:03.473Z,1492142103.473 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0024.lzma.bak
2017-04-14T03:55:03.474Z,1492142103.474 [DataOverHttps](INFO): SBD MOMSN=4885077
2017-04-14T03:55:03.593Z,1492142103.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:03.958Z,1492142103.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:04.355Z,1492142104.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:08.566Z,1492142108.566 [NAL9602](INFO): Powering down
2017-04-14T03:55:08.789Z,1492142108.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:08.981Z,1492142108.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:09.359Z,1492142109.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:09.799Z,1492142109.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:10.174Z,1492142110.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:10.581Z,1492142110.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:14.063Z,1492142114.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:14.148Z,1492142114.148 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0025.lzma
2017-04-14T03:55:14.213Z,1492142114.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:14.614Z,1492142114.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:14.925Z,1492142114.925 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0025.lzma.bak
2017-04-14T03:55:14.925Z,1492142114.925 [DataOverHttps](INFO): SBD MOMSN=4885080
2017-04-14T03:55:15.072Z,1492142115.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:15.422Z,1492142115.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:15.443Z,1492142115.443 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T03:55:15.443Z,1492142115.443 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T03:55:15.443Z,1492142115.443 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T03:55:15.780Z,1492142115.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:20.397Z,1492142120.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:20.604Z,1492142120.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:21.026Z,1492142121.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:21.320Z,1492142121.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:21.754Z,1492142121.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:22.104Z,1492142122.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:22.542Z,1492142122.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:22.914Z,1492142122.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:23.310Z,1492142123.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:23.721Z,1492142123.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:24.113Z,1492142124.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:24.531Z,1492142124.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:24.929Z,1492142124.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:25.339Z,1492142125.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:25.758Z,1492142125.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:26.119Z,1492142126.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:26.504Z,1492142126.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:26.959Z,1492142126.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:27.309Z,1492142127.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:27.706Z,1492142127.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:27.713Z,1492142127.713 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:27.713Z,1492142127.713 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T03:55:27.713Z,1492142127.713 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:55:27.751Z,1492142127.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:55:28.110Z,1492142128.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:28.168Z,1492142128.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:55:28.168Z,1492142128.168 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T03:55:28.505Z,1492142128.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:28.511Z,1492142128.511 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:55:28.512Z,1492142128.512 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:55:28.512Z,1492142128.512 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:55:28.909Z,1492142128.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:29.306Z,1492142129.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:29.716Z,1492142129.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:30.113Z,1492142130.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:30.578Z,1492142130.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:30.902Z,1492142130.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:31.324Z,1492142131.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:31.752Z,1492142131.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:32.122Z,1492142132.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:32.512Z,1492142132.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:32.938Z,1492142132.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:33.321Z,1492142133.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:33.718Z,1492142133.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:34.122Z,1492142134.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:34.538Z,1492142134.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:34.979Z,1492142134.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:35.350Z,1492142135.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:35.784Z,1492142135.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:36.126Z,1492142136.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:36.601Z,1492142136.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:36.917Z,1492142136.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:37.352Z,1492142137.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:37.736Z,1492142137.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:38.136Z,1492142138.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:38.521Z,1492142138.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:38.943Z,1492142138.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:39.310Z,1492142139.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:39.721Z,1492142139.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:40.116Z,1492142140.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:40.543Z,1492142140.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:40.930Z,1492142140.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:41.381Z,1492142141.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:41.744Z,1492142141.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:42.167Z,1492142142.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:42.536Z,1492142142.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:42.910Z,1492142142.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:43.298Z,1492142143.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:43.737Z,1492142143.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:44.137Z,1492142144.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:44.530Z,1492142144.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:44.981Z,1492142144.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:45.350Z,1492142145.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:45.715Z,1492142145.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:46.119Z,1492142146.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:46.503Z,1492142146.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:46.916Z,1492142146.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:47.346Z,1492142147.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:47.709Z,1492142147.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:48.113Z,1492142148.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:48.656Z,1492142148.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:48.947Z,1492142148.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:49.350Z,1492142149.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:49.737Z,1492142149.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:50.154Z,1492142150.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:50.536Z,1492142150.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:50.928Z,1492142150.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:51.336Z,1492142151.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:51.711Z,1492142151.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:52.134Z,1492142152.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:52.528Z,1492142152.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:52.913Z,1492142152.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:53.318Z,1492142153.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:53.713Z,1492142153.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:54.107Z,1492142154.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:54.513Z,1492142154.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:54.918Z,1492142154.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:55.318Z,1492142155.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:55.706Z,1492142155.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:56.112Z,1492142156.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:56.512Z,1492142156.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:56.989Z,1492142156.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:57.322Z,1492142157.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:57.712Z,1492142157.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:58.098Z,1492142158.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:58.504Z,1492142158.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:58.985Z,1492142158.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:59.321Z,1492142159.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:55:59.729Z,1492142159.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:00.136Z,1492142160.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:00.516Z,1492142160.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:00.975Z,1492142160.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:01.337Z,1492142161.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:01.721Z,1492142161.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:02.121Z,1492142162.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:02.620Z,1492142162.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:02.905Z,1492142162.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:03.352Z,1492142163.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:03.752Z,1492142163.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:04.125Z,1492142164.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:04.621Z,1492142164.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:04.943Z,1492142164.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:05.314Z,1492142165.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:05.720Z,1492142165.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:06.111Z,1492142166.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:06.510Z,1492142166.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:06.934Z,1492142166.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:07.317Z,1492142167.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:07.746Z,1492142167.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:08.134Z,1492142168.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:08.547Z,1492142168.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:08.920Z,1492142168.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:09.319Z,1492142169.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:09.711Z,1492142169.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:10.127Z,1492142170.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:10.559Z,1492142170.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:10.964Z,1492142170.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:11.310Z,1492142171.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:11.734Z,1492142171.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:12.134Z,1492142172.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:12.545Z,1492142172.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:12.980Z,1492142172.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:13.306Z,1492142173.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:13.710Z,1492142173.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:14.114Z,1492142174.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:14.569Z,1492142174.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:14.964Z,1492142174.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:15.423Z,1492142175.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:15.775Z,1492142175.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:16.115Z,1492142176.115 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T03:56:16.115Z,1492142176.115 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:56:16.115Z,1492142176.115 [BPC1](ERROR): Data Fault
2017-04-14T03:56:16.126Z,1492142176.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:16.147Z,1492142176.147 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:56:20.390Z,1492142180.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:20.584Z,1492142180.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:20.911Z,1492142180.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:20.979Z,1492142180.979 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:56:20.979Z,1492142180.979 [BPC1] No Fault, FailCount= 1
2017-04-14T03:56:21.376Z,1492142181.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:21.745Z,1492142181.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:22.139Z,1492142182.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:22.522Z,1492142182.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:22.937Z,1492142182.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:23.306Z,1492142183.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:23.711Z,1492142183.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:24.122Z,1492142184.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:24.504Z,1492142184.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:25.021Z,1492142185.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:25.310Z,1492142185.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:25.352Z,1492142185.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:56:25.736Z,1492142185.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:26.115Z,1492142186.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:26.148Z,1492142186.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:56:26.513Z,1492142186.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:26.975Z,1492142186.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:27.320Z,1492142187.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:27.742Z,1492142187.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:28.123Z,1492142188.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:28.586Z,1492142188.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:28.924Z,1492142188.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:29.324Z,1492142189.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:29.738Z,1492142189.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:30.108Z,1492142190.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:30.593Z,1492142190.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:30.910Z,1492142190.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:31.313Z,1492142191.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:31.711Z,1492142191.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:32.119Z,1492142192.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:32.596Z,1492142192.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:32.910Z,1492142192.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:33.330Z,1492142193.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:33.718Z,1492142193.718 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T03:56:33.718Z,1492142193.718 [BPC1] Data Fault, FailCount= 2
2017-04-14T03:56:33.718Z,1492142193.718 [BPC1](ERROR): Data Fault
2017-04-14T03:56:33.730Z,1492142193.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:33.750Z,1492142193.750 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:56:34.136Z,1492142194.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:34.584Z,1492142194.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:34.915Z,1492142194.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:34.962Z,1492142194.962 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:56:34.962Z,1492142194.962 [BPC1] No Fault, FailCount= 2
2017-04-14T03:56:35.378Z,1492142195.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:35.712Z,1492142195.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:36.158Z,1492142196.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:36.506Z,1492142196.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:36.910Z,1492142196.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:37.325Z,1492142197.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:37.724Z,1492142197.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:38.115Z,1492142198.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:38.568Z,1492142198.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:38.966Z,1492142198.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:39.316Z,1492142199.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:39.733Z,1492142199.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:40.113Z,1492142200.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:40.517Z,1492142200.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:41.028Z,1492142201.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:41.309Z,1492142201.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:41.709Z,1492142201.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:42.114Z,1492142202.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:42.617Z,1492142202.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:42.914Z,1492142202.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:43.316Z,1492142203.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:43.722Z,1492142203.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:44.116Z,1492142204.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:44.608Z,1492142204.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:44.913Z,1492142204.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:45.318Z,1492142205.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:45.714Z,1492142205.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:46.115Z,1492142206.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:46.598Z,1492142206.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:46.938Z,1492142206.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:47.310Z,1492142207.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:47.709Z,1492142207.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:48.194Z,1492142208.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:48.583Z,1492142208.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:48.946Z,1492142208.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:49.330Z,1492142209.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:49.732Z,1492142209.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:50.167Z,1492142210.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:50.605Z,1492142210.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:50.921Z,1492142210.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:51.321Z,1492142211.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:51.746Z,1492142211.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:52.134Z,1492142212.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:52.511Z,1492142212.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:53.044Z,1492142213.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:53.468Z,1492142213.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:53.714Z,1492142213.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:54.116Z,1492142214.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:54.550Z,1492142214.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:54.937Z,1492142214.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:55.376Z,1492142215.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:55.750Z,1492142215.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:56.110Z,1492142216.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:56.620Z,1492142216.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:56.971Z,1492142216.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:57.336Z,1492142217.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:57.912Z,1492142217.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:58.289Z,1492142218.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:58.727Z,1492142218.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:59.160Z,1492142219.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:59.578Z,1492142219.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:56:59.943Z,1492142219.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:00.433Z,1492142220.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:00.854Z,1492142220.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:01.296Z,1492142221.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:01.682Z,1492142221.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:02.262Z,1492142222.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:02.751Z,1492142222.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:03.049Z,1492142223.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:03.403Z,1492142223.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:03.841Z,1492142223.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:04.197Z,1492142224.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:04.713Z,1492142224.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:05.018Z,1492142225.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:05.403Z,1492142225.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:05.792Z,1492142225.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:06.206Z,1492142226.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:06.590Z,1492142226.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:07.086Z,1492142227.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:07.437Z,1492142227.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:07.811Z,1492142227.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:08.193Z,1492142228.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:08.579Z,1492142228.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:09.037Z,1492142229.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:09.391Z,1492142229.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:09.770Z,1492142229.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:10.172Z,1492142230.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:10.579Z,1492142230.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:11.025Z,1492142231.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:11.387Z,1492142231.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:11.786Z,1492142231.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:12.159Z,1492142232.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:12.664Z,1492142232.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:12.968Z,1492142232.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:13.403Z,1492142233.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:13.769Z,1492142233.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:14.175Z,1492142234.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:14.583Z,1492142234.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:14.976Z,1492142234.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:15.348Z,1492142235.348 [PNI_TCM](ERROR): CRC does not match. Expected:0x57563 got:0x44736
2017-04-14T03:57:15.379Z,1492142235.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:15.784Z,1492142235.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:16.196Z,1492142236.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:19.860Z,1492142239.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:57:20.656Z,1492142240.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:57:23.214Z,1492142243.214 [BPC1](ERROR): Failed to receive battery data
2017-04-14T03:57:23.215Z,1492142243.215 [BPC1] Communications Fault, FailCount= 1
2017-04-14T03:57:23.215Z,1492142243.215 [BPC1](ERROR): Communications Fault
2017-04-14T03:57:23.261Z,1492142243.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:23.298Z,1492142243.298 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T03:57:23.438Z,1492142243.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:23.770Z,1492142243.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:24.188Z,1492142244.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:24.235Z,1492142244.235 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:57:24.235Z,1492142244.235 [BPC1] No Fault, FailCount= 1
2017-04-14T03:57:24.721Z,1492142244.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:25.030Z,1492142245.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:25.423Z,1492142245.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:25.806Z,1492142245.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:26.171Z,1492142246.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:26.604Z,1492142246.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:26.977Z,1492142246.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:27.373Z,1492142247.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:27.828Z,1492142247.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:28.176Z,1492142248.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:28.678Z,1492142248.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:29.026Z,1492142249.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:29.386Z,1492142249.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:29.777Z,1492142249.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:30.177Z,1492142250.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:30.605Z,1492142250.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:31.027Z,1492142251.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:31.417Z,1492142251.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:31.773Z,1492142251.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:32.187Z,1492142252.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:32.667Z,1492142252.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:33.047Z,1492142253.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:33.405Z,1492142253.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:33.780Z,1492142253.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:34.192Z,1492142254.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:34.578Z,1492142254.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:35.058Z,1492142255.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:35.369Z,1492142255.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:35.781Z,1492142255.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:36.178Z,1492142256.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:36.575Z,1492142256.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:37.055Z,1492142257.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:37.442Z,1492142257.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:37.790Z,1492142257.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:38.194Z,1492142258.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:38.563Z,1492142258.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:39.004Z,1492142259.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:39.440Z,1492142259.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:39.805Z,1492142259.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:40.167Z,1492142260.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:40.571Z,1492142260.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:40.966Z,1492142260.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:41.371Z,1492142261.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:41.799Z,1492142261.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:42.164Z,1492142262.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:42.581Z,1492142262.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:42.990Z,1492142262.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:43.391Z,1492142263.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:43.782Z,1492142263.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:44.200Z,1492142264.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:44.720Z,1492142264.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:45.094Z,1492142265.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:45.463Z,1492142265.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:45.780Z,1492142265.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:46.182Z,1492142266.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:46.628Z,1492142266.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:46.994Z,1492142266.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:47.359Z,1492142267.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:47.771Z,1492142267.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:48.252Z,1492142268.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:48.585Z,1492142268.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:48.976Z,1492142268.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:49.447Z,1492142269.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:49.765Z,1492142269.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:50.174Z,1492142270.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:50.628Z,1492142270.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:51.092Z,1492142271.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:51.470Z,1492142271.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:51.834Z,1492142271.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:52.197Z,1492142272.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:52.635Z,1492142272.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:52.993Z,1492142272.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:53.434Z,1492142273.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:53.846Z,1492142273.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:54.187Z,1492142274.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:54.594Z,1492142274.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:55.001Z,1492142275.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:55.413Z,1492142275.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:55.804Z,1492142275.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:56.253Z,1492142276.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:56.615Z,1492142276.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:57.002Z,1492142277.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:57.404Z,1492142277.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:57.797Z,1492142277.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:58.205Z,1492142278.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:58.650Z,1492142278.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:59.023Z,1492142279.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:59.412Z,1492142279.412 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:59.412Z,1492142279.412 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T03:57:59.413Z,1492142279.413 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T03:57:59.419Z,1492142279.419 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:57:59.419Z,1492142279.419 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T03:57:59.419Z,1492142279.419 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T03:57:59.446Z,1492142279.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T03:57:59.446Z,1492142279.446 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T03:57:59.859Z,1492142279.859 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T03:57:59.860Z,1492142279.860 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T03:57:59.860Z,1492142279.860 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T03:57:59.860Z,1492142279.861 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T03:58:00.194Z,1492142280.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T03:58:00.194Z,1492142280.194 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:58:00.195Z,1492142280.195 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:58:00.216Z,1492142280.216 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T03:58:00.216Z,1492142280.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:58:00.217Z,1492142280.217 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:58:00.633Z,1492142280.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:01.044Z,1492142281.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:01.441Z,1492142281.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:01.892Z,1492142281.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:02.209Z,1492142282.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:02.633Z,1492142282.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:02.997Z,1492142282.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:03.442Z,1492142283.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:03.845Z,1492142283.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:04.251Z,1492142284.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:04.619Z,1492142284.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:05.094Z,1492142285.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:05.446Z,1492142285.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:05.915Z,1492142285.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:06.799Z,1492142286.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:07.153Z,1492142287.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:07.626Z,1492142287.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:08.473Z,1492142288.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:09.104Z,1492142289.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:09.502Z,1492142289.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:09.830Z,1492142289.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:10.206Z,1492142290.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:10.704Z,1492142290.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:11.067Z,1492142291.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:11.600Z,1492142291.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:12.160Z,1492142292.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:12.770Z,1492142292.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:13.301Z,1492142293.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:13.912Z,1492142293.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:14.206Z,1492142294.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:14.631Z,1492142294.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:15.057Z,1492142295.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:15.611Z,1492142295.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:15.928Z,1492142295.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:16.314Z,1492142296.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:25.632Z,1492142305.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:25.776Z,1492142305.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:26.133Z,1492142306.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:26.624Z,1492142306.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:26.934Z,1492142306.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:27.384Z,1492142307.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:27.789Z,1492142307.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:28.154Z,1492142308.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:28.561Z,1492142308.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:28.612Z,1492142308.612 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:28.612Z,1492142308.612 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T03:58:28.612Z,1492142308.612 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T03:58:28.679Z,1492142308.679 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T03:58:28.934Z,1492142308.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:29.000Z,1492142309.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T03:58:29.000Z,1492142309.000 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T03:58:29.329Z,1492142309.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:29.356Z,1492142309.356 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T03:58:29.356Z,1492142309.356 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T03:58:29.357Z,1492142309.357 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T03:58:29.808Z,1492142309.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:30.162Z,1492142310.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:30.557Z,1492142310.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:30.947Z,1492142310.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:31.152Z,1492142311.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:58:31.334Z,1492142311.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:31.743Z,1492142311.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:31.948Z,1492142311.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:58:32.145Z,1492142312.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:32.526Z,1492142312.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:32.962Z,1492142312.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:33.355Z,1492142313.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:33.734Z,1492142313.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:34.134Z,1492142314.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:34.538Z,1492142314.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:34.939Z,1492142314.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:35.339Z,1492142315.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:35.736Z,1492142315.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:36.152Z,1492142316.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:36.557Z,1492142316.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:36.961Z,1492142316.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:37.336Z,1492142317.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:37.740Z,1492142317.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:38.128Z,1492142318.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:38.585Z,1492142318.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:38.934Z,1492142318.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:39.326Z,1492142319.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:39.786Z,1492142319.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:40.136Z,1492142320.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:40.524Z,1492142320.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:41.009Z,1492142321.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:41.333Z,1492142321.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:41.748Z,1492142321.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:42.165Z,1492142322.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:42.626Z,1492142322.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:42.984Z,1492142322.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:43.322Z,1492142323.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:43.812Z,1492142323.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:44.203Z,1492142324.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:44.760Z,1492142324.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:45.026Z,1492142325.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:45.548Z,1492142325.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:45.850Z,1492142325.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:46.258Z,1492142326.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:46.605Z,1492142326.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:47.025Z,1492142327.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:47.383Z,1492142327.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:47.802Z,1492142327.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:48.183Z,1492142328.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:48.638Z,1492142328.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:48.974Z,1492142328.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:49.384Z,1492142329.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:49.789Z,1492142329.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:50.176Z,1492142330.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:50.583Z,1492142330.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:50.980Z,1492142330.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:51.376Z,1492142331.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:51.774Z,1492142331.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:52.173Z,1492142332.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:52.585Z,1492142332.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:52.985Z,1492142332.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:53.388Z,1492142333.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:53.925Z,1492142333.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:54.179Z,1492142334.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:54.566Z,1492142334.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:55.014Z,1492142335.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:55.371Z,1492142335.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:55.810Z,1492142335.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:56.198Z,1492142336.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:56.567Z,1492142336.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:56.973Z,1492142336.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:57.381Z,1492142337.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:57.782Z,1492142337.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:58.181Z,1492142338.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:58.601Z,1492142338.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:59.001Z,1492142339.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:59.382Z,1492142339.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:58:59.782Z,1492142339.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:00.167Z,1492142340.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:00.591Z,1492142340.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:00.976Z,1492142340.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:01.374Z,1492142341.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:01.790Z,1492142341.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:02.242Z,1492142342.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:02.589Z,1492142342.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:02.975Z,1492142342.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:03.408Z,1492142343.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:03.774Z,1492142343.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:04.333Z,1492142344.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:04.708Z,1492142344.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:05.182Z,1492142345.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:05.521Z,1492142345.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:05.962Z,1492142345.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:06.348Z,1492142346.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:06.673Z,1492142346.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:07.093Z,1492142347.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:07.493Z,1492142347.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:07.973Z,1492142347.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:08.379Z,1492142348.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:08.798Z,1492142348.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:09.101Z,1492142349.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:09.483Z,1492142349.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:09.894Z,1492142349.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:10.300Z,1492142350.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:10.644Z,1492142350.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:11.122Z,1492142351.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:11.452Z,1492142351.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:11.728Z,1492142351.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:11.853Z,1492142351.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:12.225Z,1492142352.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:12.525Z,1492142352.525 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:12.734Z,1492142352.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:13.056Z,1492142353.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:13.165Z,1492142353.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:13.429Z,1492142353.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:13.835Z,1492142353.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:13.960Z,1492142353.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:14.247Z,1492142354.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:14.745Z,1492142354.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:15.074Z,1492142355.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:15.454Z,1492142355.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:15.853Z,1492142355.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:16.360Z,1492142356.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:16.656Z,1492142356.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:17.113Z,1492142357.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:17.430Z,1492142357.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:17.830Z,1492142357.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:18.315Z,1492142358.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:18.648Z,1492142358.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:19.099Z,1492142359.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:19.518Z,1492142359.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:25.045Z,1492142365.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:25.170Z,1492142365.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:25.581Z,1492142365.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:25.596Z,1492142365.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:26.010Z,1492142366.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:26.377Z,1492142366.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:26.392Z,1492142366.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T03:59:26.782Z,1492142366.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:27.191Z,1492142367.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:27.583Z,1492142367.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:27.966Z,1492142367.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:28.408Z,1492142368.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:28.770Z,1492142368.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:29.168Z,1492142369.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:29.570Z,1492142369.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:29.977Z,1492142369.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:30.390Z,1492142370.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:30.782Z,1492142370.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:31.239Z,1492142371.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:31.580Z,1492142371.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:31.993Z,1492142371.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:32.598Z,1492142372.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:32.769Z,1492142372.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:33.162Z,1492142373.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:33.554Z,1492142373.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:33.962Z,1492142373.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:34.365Z,1492142374.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:34.763Z,1492142374.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:35.162Z,1492142375.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:35.565Z,1492142375.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:35.958Z,1492142375.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:36.400Z,1492142376.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:36.770Z,1492142376.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:37.181Z,1492142377.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:37.578Z,1492142377.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:37.961Z,1492142377.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:38.406Z,1492142378.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:38.798Z,1492142378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:39.266Z,1492142379.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:39.601Z,1492142379.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:39.986Z,1492142379.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:40.370Z,1492142380.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:40.822Z,1492142380.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:41.218Z,1492142381.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:41.573Z,1492142381.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:42.040Z,1492142382.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:42.435Z,1492142382.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:42.880Z,1492142382.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:43.157Z,1492142383.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:43.576Z,1492142383.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:43.983Z,1492142383.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:44.401Z,1492142384.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:44.774Z,1492142384.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:45.188Z,1492142385.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:45.595Z,1492142385.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:45.986Z,1492142385.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:46.358Z,1492142386.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:46.780Z,1492142386.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:47.169Z,1492142387.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:47.552Z,1492142387.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:47.964Z,1492142387.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:48.379Z,1492142388.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:48.756Z,1492142388.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:49.179Z,1492142389.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:49.588Z,1492142389.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:49.960Z,1492142389.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:50.356Z,1492142390.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:50.791Z,1492142390.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:51.168Z,1492142391.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:51.572Z,1492142391.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:51.968Z,1492142391.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:52.365Z,1492142392.365 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T03:59:52.365Z,1492142392.365 [BPC1] Data Fault, FailCount= 1
2017-04-14T03:59:52.365Z,1492142392.365 [BPC1](ERROR): Data Fault
2017-04-14T03:59:52.390Z,1492142392.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:52.468Z,1492142392.468 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T03:59:52.759Z,1492142392.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:53.186Z,1492142393.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:53.577Z,1492142393.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:53.621Z,1492142393.621 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T03:59:53.621Z,1492142393.621 [BPC1] No Fault, FailCount= 1
2017-04-14T03:59:54.035Z,1492142394.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:54.389Z,1492142394.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:54.785Z,1492142394.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:55.156Z,1492142395.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:55.562Z,1492142395.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:55.957Z,1492142395.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:56.355Z,1492142396.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:56.766Z,1492142396.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:57.160Z,1492142397.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:57.558Z,1492142397.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:57.962Z,1492142397.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:58.407Z,1492142398.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:58.755Z,1492142398.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:59.175Z,1492142399.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:59.553Z,1492142399.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T03:59:59.951Z,1492142399.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:00.353Z,1492142400.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:00.765Z,1492142400.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:01.167Z,1492142401.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:01.562Z,1492142401.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:01.955Z,1492142401.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:02.362Z,1492142402.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:02.771Z,1492142402.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:03.170Z,1492142403.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:03.616Z,1492142403.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:03.982Z,1492142403.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:04.375Z,1492142404.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:04.790Z,1492142404.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:05.156Z,1492142405.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:05.555Z,1492142405.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:05.967Z,1492142405.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:06.394Z,1492142406.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:06.874Z,1492142406.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:07.183Z,1492142407.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:07.582Z,1492142407.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:07.952Z,1492142407.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:08.390Z,1492142408.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:08.807Z,1492142408.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:09.157Z,1492142409.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:09.569Z,1492142409.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:10.030Z,1492142410.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:10.391Z,1492142410.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:10.806Z,1492142410.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:11.174Z,1492142411.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:11.554Z,1492142411.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:11.960Z,1492142411.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:12.466Z,1492142412.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:12.786Z,1492142412.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:13.230Z,1492142413.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:13.594Z,1492142413.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:13.961Z,1492142413.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:14.405Z,1492142414.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:14.808Z,1492142414.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:15.186Z,1492142415.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:15.550Z,1492142415.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:15.971Z,1492142415.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:15.987Z,1492142415.987 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:00:15.987Z,1492142415.987 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:00:15.988Z,1492142415.987 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:00:15.988Z,1492142415.988 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:00:16.388Z,1492142416.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:16.415Z,1492142416.415 [Default:CheckIn:D] Stopped
2017-04-14T04:00:16.423Z,1492142416.423 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:00:16.764Z,1492142416.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:16.805Z,1492142416.805 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 34.184937 min 
2017-04-14T04:00:16.805Z,1492142416.805 [Default:CheckIn:E] Stopped
2017-04-14T04:00:16.805Z,1492142416.805 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:00:16.805Z,1492142416.805 [Default:CheckIn] Stopped
2017-04-14T04:00:16.805Z,1492142416.806 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:00:16.806Z,1492142416.806 [Default:CheckIn](INFO): Running loop #6
2017-04-14T04:00:16.806Z,1492142416.806 [Default:CheckIn] Running Loop=6
2017-04-14T04:00:16.806Z,1492142416.806 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:00:16.806Z,1492142416.806 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:00:21.385Z,1492142421.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:21.474Z,1492142421.474 [NAL9602](INFO): Powering up
2017-04-14T04:00:21.520Z,1492142421.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:21.986Z,1492142421.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:22.353Z,1492142422.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:22.760Z,1492142422.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:22.996Z,1492142422.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:00:23.317Z,1492142423.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:23.573Z,1492142423.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:23.792Z,1492142423.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:00:23.965Z,1492142423.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:24.374Z,1492142424.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:24.720Z,1492142424.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:25.123Z,1492142425.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:25.536Z,1492142425.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:25.923Z,1492142425.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:26.297Z,1492142426.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:26.726Z,1492142426.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:27.103Z,1492142427.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:27.504Z,1492142427.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:27.956Z,1492142427.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:28.308Z,1492142428.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:28.759Z,1492142428.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:29.130Z,1492142429.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:29.670Z,1492142429.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:29.949Z,1492142429.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:30.339Z,1492142430.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:30.721Z,1492142430.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:31.159Z,1492142431.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:31.515Z,1492142431.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:31.913Z,1492142431.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:32.332Z,1492142432.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:32.669Z,1492142432.669 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:00:32.719Z,1492142432.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:33.126Z,1492142433.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:33.528Z,1492142433.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:33.926Z,1492142433.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:34.322Z,1492142434.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:34.723Z,1492142434.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:35.118Z,1492142435.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:35.521Z,1492142435.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:35.946Z,1492142435.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:36.346Z,1492142436.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:36.733Z,1492142436.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:37.109Z,1492142437.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:37.534Z,1492142437.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:37.909Z,1492142437.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:38.342Z,1492142438.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:38.780Z,1492142438.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:39.118Z,1492142439.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:39.525Z,1492142439.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:39.927Z,1492142439.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:40.326Z,1492142440.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:40.730Z,1492142440.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:41.114Z,1492142441.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:41.533Z,1492142441.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:41.891Z,1492142441.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:42.325Z,1492142442.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:42.726Z,1492142442.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:43.110Z,1492142443.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:43.518Z,1492142443.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:43.918Z,1492142443.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:44.310Z,1492142444.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:44.708Z,1492142444.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:45.114Z,1492142445.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:45.507Z,1492142445.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:45.914Z,1492142445.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:46.335Z,1492142446.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:46.727Z,1492142446.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:47.127Z,1492142447.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:47.501Z,1492142447.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:47.905Z,1492142447.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:48.314Z,1492142448.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:48.705Z,1492142448.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:49.106Z,1492142449.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:49.509Z,1492142449.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:49.910Z,1492142449.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:50.314Z,1492142450.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:50.777Z,1492142450.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:51.134Z,1492142451.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:51.510Z,1492142451.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:51.918Z,1492142451.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:52.358Z,1492142452.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:52.718Z,1492142452.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:53.130Z,1492142453.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:53.561Z,1492142453.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:53.911Z,1492142453.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:54.350Z,1492142454.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:54.791Z,1492142454.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:55.183Z,1492142455.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:55.535Z,1492142455.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:55.935Z,1492142455.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:56.355Z,1492142456.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:56.732Z,1492142456.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:57.142Z,1492142457.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:57.497Z,1492142457.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:57.910Z,1492142457.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:58.317Z,1492142458.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:58.710Z,1492142458.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:59.115Z,1492142459.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:59.518Z,1492142459.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:00:59.923Z,1492142459.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:00.313Z,1492142460.313 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:00.313Z,1492142460.313 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:01:00.313Z,1492142460.313 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:01:00.320Z,1492142460.320 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:00.320Z,1492142460.320 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:01:00.320Z,1492142460.320 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:01:00.337Z,1492142460.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:01:00.337Z,1492142460.337 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:01:00.734Z,1492142460.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:01:00.734Z,1492142460.734 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:01:00.735Z,1492142460.735 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:01:00.735Z,1492142460.736 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:01:01.125Z,1492142461.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:01:01.125Z,1492142461.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:01:01.125Z,1492142461.125 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:01:01.130Z,1492142461.130 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:01:01.131Z,1492142461.131 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:01:01.131Z,1492142461.131 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:01:01.506Z,1492142461.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:01.912Z,1492142461.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:02.307Z,1492142462.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:02.712Z,1492142462.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:03.115Z,1492142463.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:03.519Z,1492142463.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:03.919Z,1492142463.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:04.332Z,1492142464.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:04.724Z,1492142464.724 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:01:04.725Z,1492142464.724 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:01:04.725Z,1492142464.725 [BPC1](ERROR): Data Fault
2017-04-14T04:01:04.754Z,1492142464.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:04.816Z,1492142464.816 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:01:05.132Z,1492142465.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:05.508Z,1492142465.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:05.945Z,1492142465.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:06.028Z,1492142466.028 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:01:06.028Z,1492142466.028 [BPC1] No Fault, FailCount= 1
2017-04-14T04:01:06.389Z,1492142466.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:06.758Z,1492142466.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:07.116Z,1492142467.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:07.505Z,1492142467.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:07.910Z,1492142467.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:08.308Z,1492142468.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:08.708Z,1492142468.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:09.115Z,1492142469.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:09.510Z,1492142469.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:09.918Z,1492142469.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:10.320Z,1492142470.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:10.707Z,1492142470.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:11.106Z,1492142471.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:11.518Z,1492142471.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:11.959Z,1492142471.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:12.314Z,1492142472.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:12.723Z,1492142472.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:13.115Z,1492142473.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:13.530Z,1492142473.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:13.912Z,1492142473.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:14.316Z,1492142474.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:14.716Z,1492142474.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:15.114Z,1492142475.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:15.516Z,1492142475.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:15.916Z,1492142475.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:16.325Z,1492142476.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:16.721Z,1492142476.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:17.117Z,1492142477.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:23.774Z,1492142483.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:23.946Z,1492142483.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:24.287Z,1492142484.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:24.687Z,1492142484.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:25.038Z,1492142485.038 [NAL9602](INFO): SBD MO Status=2, MOMSN=2099, MT Status=2, MTMSN=0
2017-04-14T04:01:25.038Z,1492142485.038 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T04:01:25.094Z,1492142485.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:25.488Z,1492142485.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:25.911Z,1492142485.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:26.313Z,1492142486.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:26.710Z,1492142486.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:27.131Z,1492142487.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:27.516Z,1492142487.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:27.914Z,1492142487.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:28.286Z,1492142488.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:28.678Z,1492142488.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:29.079Z,1492142489.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:29.489Z,1492142489.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:29.516Z,1492142489.516 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:29.517Z,1492142489.517 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T04:01:29.517Z,1492142489.517 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:01:29.552Z,1492142489.552 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:01:29.891Z,1492142489.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:29.936Z,1492142489.936 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:01:29.936Z,1492142489.936 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T04:01:30.281Z,1492142490.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:30.287Z,1492142490.286 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:01:30.287Z,1492142490.287 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:01:30.287Z,1492142490.287 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:01:30.673Z,1492142490.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:31.086Z,1492142491.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:31.490Z,1492142491.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:31.879Z,1492142491.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:32.286Z,1492142492.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:32.674Z,1492142492.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:33.083Z,1492142493.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:33.524Z,1492142493.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:33.894Z,1492142493.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:34.355Z,1492142494.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:34.722Z,1492142494.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:35.104Z,1492142495.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:35.476Z,1492142495.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:35.880Z,1492142495.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:36.350Z,1492142496.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:36.683Z,1492142496.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:37.096Z,1492142497.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:37.496Z,1492142497.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:37.897Z,1492142497.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:38.296Z,1492142498.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:38.693Z,1492142498.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:39.152Z,1492142499.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:39.546Z,1492142499.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:39.893Z,1492142499.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:40.329Z,1492142500.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:40.692Z,1492142500.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:41.132Z,1492142501.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:41.507Z,1492142501.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:41.916Z,1492142501.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:42.291Z,1492142502.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:42.701Z,1492142502.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:43.096Z,1492142503.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:43.502Z,1492142503.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:43.906Z,1492142503.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:44.288Z,1492142504.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:44.717Z,1492142504.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:45.086Z,1492142505.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:45.495Z,1492142505.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:45.902Z,1492142505.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:46.284Z,1492142506.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:46.682Z,1492142506.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:47.075Z,1492142507.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:47.469Z,1492142507.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:47.886Z,1492142507.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:48.273Z,1492142508.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:48.687Z,1492142508.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:49.087Z,1492142509.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:49.498Z,1492142509.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:49.890Z,1492142509.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:50.282Z,1492142510.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:50.689Z,1492142510.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:51.110Z,1492142511.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:51.504Z,1492142511.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:51.897Z,1492142511.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:52.312Z,1492142512.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:52.708Z,1492142512.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:53.086Z,1492142513.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:53.515Z,1492142513.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:53.914Z,1492142513.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:54.312Z,1492142514.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:54.738Z,1492142514.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:55.038Z,1492142515.038 [NAL9602](INFO): SBD MO Status=0, MOMSN=2099, MT Status=0, MTMSN=0
2017-04-14T04:01:55.038Z,1492142515.038 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:01:55.123Z,1492142515.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:55.563Z,1492142515.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:55.954Z,1492142515.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:56.259Z,1492142516.259 [NAL9602](INFO): GPS fix at 20170414T040158: (36.802330, -121.787147)
2017-04-14T04:01:56.412Z,1492142516.412 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:01:56.412Z,1492142516.412 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:01:56.712Z,1492142516.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:56.712Z,1492142516.712 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:01:56.712Z,1492142516.712 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:01:56.734Z,1492142516.734 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:01:56.734Z,1492142516.734 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:01:56.734Z,1492142516.734 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:01:56.777Z,1492142516.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:01:56.777Z,1492142516.777 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:01:57.375Z,1492142517.375 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:01:57.375Z,1492142517.375 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:01:57.376Z,1492142517.376 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:01:57.376Z,1492142517.376 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:01:57.771Z,1492142517.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:01:57.772Z,1492142517.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:01:57.772Z,1492142517.772 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:01:57.779Z,1492142517.779 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:01:57.799Z,1492142517.799 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:01:57.800Z,1492142517.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:01:58.182Z,1492142518.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:07.073Z,1492142527.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:07.167Z,1492142527.167 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0028.lzma
2017-04-14T04:02:07.170Z,1492142527.170 [NAL9602](INFO): Powering down
2017-04-14T04:02:07.282Z,1492142527.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:07.627Z,1492142527.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:07.967Z,1492142527.967 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0028.lzma.bak
2017-04-14T04:02:07.967Z,1492142527.967 [DataOverHttps](INFO): SBD MOMSN=4885118
2017-04-14T04:02:08.252Z,1492142528.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:08.503Z,1492142528.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:09.054Z,1492142529.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:13.988Z,1492142533.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:14.087Z,1492142534.087 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:02:14.218Z,1492142534.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:14.564Z,1492142534.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:14.836Z,1492142534.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:02:14.976Z,1492142534.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:15.375Z,1492142535.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:15.632Z,1492142535.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:02:15.790Z,1492142535.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:20.102Z,1492142540.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:20.149Z,1492142540.149 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0029.lzma
2017-04-14T04:02:20.201Z,1492142540.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:20.609Z,1492142540.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:20.953Z,1492142540.953 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0029.lzma.bak
2017-04-14T04:02:20.953Z,1492142540.954 [DataOverHttps](INFO): SBD MOMSN=4885121
2017-04-14T04:02:21.023Z,1492142541.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:21.419Z,1492142541.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:21.444Z,1492142541.444 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:02:21.444Z,1492142541.444 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:02:21.444Z,1492142541.444 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:02:21.807Z,1492142541.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:25.951Z,1492142545.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:26.160Z,1492142546.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:26.516Z,1492142546.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:26.860Z,1492142546.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:27.282Z,1492142547.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:27.642Z,1492142547.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:28.042Z,1492142548.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:28.468Z,1492142548.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:28.851Z,1492142548.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:29.248Z,1492142549.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:29.679Z,1492142549.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:30.036Z,1492142550.036 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:02:30.036Z,1492142550.036 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:02:30.036Z,1492142550.036 [BPC1](ERROR): Communications Fault
2017-04-14T04:02:30.100Z,1492142550.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:30.135Z,1492142550.135 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:02:30.463Z,1492142550.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:30.845Z,1492142550.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:31.248Z,1492142551.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:31.294Z,1492142551.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:02:31.294Z,1492142551.294 [BPC1] No Fault, FailCount= 1
2017-04-14T04:02:31.706Z,1492142551.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:32.129Z,1492142552.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:32.481Z,1492142552.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:32.859Z,1492142552.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:33.252Z,1492142553.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:33.661Z,1492142553.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:34.134Z,1492142554.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:34.500Z,1492142554.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:34.863Z,1492142554.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:35.247Z,1492142555.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:35.678Z,1492142555.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:36.138Z,1492142556.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:36.473Z,1492142556.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:36.947Z,1492142556.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:37.258Z,1492142557.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:37.691Z,1492142557.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:38.106Z,1492142558.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:38.520Z,1492142558.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:38.882Z,1492142558.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:39.304Z,1492142559.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:39.659Z,1492142559.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:40.117Z,1492142560.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:40.453Z,1492142560.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:40.856Z,1492142560.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:41.235Z,1492142561.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:41.643Z,1492142561.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:42.047Z,1492142562.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:42.467Z,1492142562.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:42.867Z,1492142562.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:43.242Z,1492142563.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:43.663Z,1492142563.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:44.049Z,1492142564.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:44.468Z,1492142564.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:44.849Z,1492142564.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:45.248Z,1492142565.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:45.659Z,1492142565.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:46.105Z,1492142566.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:46.464Z,1492142566.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:46.859Z,1492142566.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:47.255Z,1492142567.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:47.670Z,1492142567.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:48.063Z,1492142568.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:48.485Z,1492142568.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:48.863Z,1492142568.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:49.244Z,1492142569.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:49.718Z,1492142569.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:50.101Z,1492142570.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:50.459Z,1492142570.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:50.881Z,1492142570.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:51.297Z,1492142571.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:51.651Z,1492142571.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:52.071Z,1492142572.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:52.508Z,1492142572.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:52.852Z,1492142572.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:53.272Z,1492142573.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:53.695Z,1492142573.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:54.097Z,1492142574.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:54.465Z,1492142574.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:54.892Z,1492142574.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:55.249Z,1492142575.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:55.694Z,1492142575.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:56.052Z,1492142576.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:56.454Z,1492142576.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:56.860Z,1492142576.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:57.272Z,1492142577.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:57.639Z,1492142577.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:58.035Z,1492142578.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:58.447Z,1492142578.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:58.884Z,1492142578.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:59.249Z,1492142579.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:02:59.648Z,1492142579.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:00.063Z,1492142580.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:00.457Z,1492142580.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:00.857Z,1492142580.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:01.253Z,1492142581.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:01.657Z,1492142581.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:02.067Z,1492142582.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:02.491Z,1492142582.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:02.850Z,1492142582.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:03.285Z,1492142583.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:03.643Z,1492142583.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:04.092Z,1492142584.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:04.478Z,1492142584.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:04.874Z,1492142584.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:05.267Z,1492142585.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:05.722Z,1492142585.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:06.054Z,1492142586.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:06.458Z,1492142586.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:06.922Z,1492142586.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:07.289Z,1492142587.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:07.675Z,1492142587.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:08.114Z,1492142588.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:08.450Z,1492142588.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:08.845Z,1492142588.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:09.264Z,1492142589.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:09.653Z,1492142589.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:10.050Z,1492142590.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:10.469Z,1492142590.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:10.869Z,1492142590.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:11.256Z,1492142591.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:11.627Z,1492142591.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:12.058Z,1492142592.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:12.439Z,1492142592.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:12.843Z,1492142592.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:13.250Z,1492142593.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:13.642Z,1492142593.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:14.037Z,1492142594.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:14.450Z,1492142594.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:14.840Z,1492142594.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:15.240Z,1492142595.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:15.645Z,1492142595.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:16.044Z,1492142596.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:16.438Z,1492142596.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:16.850Z,1492142596.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:17.290Z,1492142597.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:17.649Z,1492142597.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:18.108Z,1492142598.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:18.478Z,1492142598.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:18.850Z,1492142598.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:19.316Z,1492142599.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:19.665Z,1492142599.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:20.056Z,1492142600.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:20.465Z,1492142600.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:20.835Z,1492142600.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:21.237Z,1492142601.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:21.650Z,1492142601.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:22.073Z,1492142602.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:26.043Z,1492142606.043 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:03:26.043Z,1492142606.043 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:03:26.044Z,1492142606.044 [BPC1](ERROR): Communications Fault
2017-04-14T04:03:26.053Z,1492142606.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:26.101Z,1492142606.102 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:03:26.282Z,1492142606.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:26.599Z,1492142606.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:27.026Z,1492142607.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:27.160Z,1492142607.160 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:03:27.161Z,1492142607.161 [BPC1] No Fault, FailCount= 1
2017-04-14T04:03:27.418Z,1492142607.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:27.803Z,1492142607.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:28.276Z,1492142608.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:28.719Z,1492142608.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:28.983Z,1492142608.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:29.431Z,1492142609.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:29.807Z,1492142609.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:30.164Z,1492142610.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:30.571Z,1492142610.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:30.974Z,1492142610.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:31.370Z,1492142611.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:31.772Z,1492142611.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:32.165Z,1492142612.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:32.586Z,1492142612.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:33.025Z,1492142613.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:33.366Z,1492142613.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:33.773Z,1492142613.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:34.195Z,1492142614.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:34.577Z,1492142614.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:35.014Z,1492142615.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:35.374Z,1492142615.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:35.786Z,1492142615.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:36.178Z,1492142616.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:36.643Z,1492142616.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:37.014Z,1492142617.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:37.451Z,1492142617.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:37.863Z,1492142617.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:38.460Z,1492142618.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:38.923Z,1492142618.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:39.274Z,1492142619.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:39.636Z,1492142619.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:40.011Z,1492142620.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:40.467Z,1492142620.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:40.887Z,1492142620.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:41.249Z,1492142621.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:41.632Z,1492142621.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:42.043Z,1492142622.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:42.398Z,1492142622.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:42.798Z,1492142622.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:43.199Z,1492142623.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:43.603Z,1492142623.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:44.028Z,1492142624.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:44.401Z,1492142624.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:44.798Z,1492142624.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:45.196Z,1492142625.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:45.601Z,1492142625.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:45.976Z,1492142625.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:46.401Z,1492142626.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:46.784Z,1492142626.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:47.208Z,1492142627.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:47.585Z,1492142627.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:47.984Z,1492142627.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:48.390Z,1492142628.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:48.786Z,1492142628.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:49.238Z,1492142629.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:49.589Z,1492142629.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:50.042Z,1492142630.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:50.407Z,1492142630.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:50.793Z,1492142630.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:51.234Z,1492142631.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:51.603Z,1492142631.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:51.990Z,1492142631.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:52.399Z,1492142632.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:52.668Z,1492142632.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:03:52.818Z,1492142632.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:53.206Z,1492142633.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:53.464Z,1492142633.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:03:53.621Z,1492142633.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:54.012Z,1492142634.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:54.399Z,1492142634.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:54.833Z,1492142634.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:55.187Z,1492142635.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:55.586Z,1492142635.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:56.039Z,1492142636.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:56.394Z,1492142636.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:56.801Z,1492142636.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:57.193Z,1492142637.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:57.595Z,1492142637.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:58.005Z,1492142638.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:58.406Z,1492142638.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:58.804Z,1492142638.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:59.204Z,1492142639.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:59.581Z,1492142639.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:03:59.986Z,1492142639.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:00.406Z,1492142640.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:00.819Z,1492142640.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:01.185Z,1492142641.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:01.582Z,1492142641.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:01.990Z,1492142641.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:02.391Z,1492142642.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:02.794Z,1492142642.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:03.189Z,1492142643.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:03.444Z,1492142643.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:03.597Z,1492142643.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:04.047Z,1492142644.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:04.240Z,1492142644.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:04.397Z,1492142644.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:04.644Z,1492142644.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:04.856Z,1492142644.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:05.263Z,1492142645.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:05.444Z,1492142645.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:05.673Z,1492142645.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:06.041Z,1492142646.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:06.241Z,1492142646.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:06.438Z,1492142646.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:06.644Z,1492142646.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:06.805Z,1492142646.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:07.219Z,1492142647.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:07.440Z,1492142647.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:07.597Z,1492142647.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:07.997Z,1492142647.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:08.236Z,1492142648.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:08.397Z,1492142648.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:08.640Z,1492142648.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:08.797Z,1492142648.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:09.192Z,1492142649.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:09.436Z,1492142649.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:09.576Z,1492142649.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:10.003Z,1492142650.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:10.232Z,1492142650.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:10.400Z,1492142650.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:10.638Z,1492142650.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:10.800Z,1492142650.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:11.189Z,1492142651.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:11.432Z,1492142651.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:11.586Z,1492142651.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:11.985Z,1492142651.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:12.229Z,1492142652.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:12.394Z,1492142652.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:12.636Z,1492142652.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:12.800Z,1492142652.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:13.198Z,1492142653.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:13.432Z,1492142653.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:13.612Z,1492142653.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:14.005Z,1492142654.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:14.228Z,1492142654.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:14.407Z,1492142654.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:14.632Z,1492142654.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:14.793Z,1492142654.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:15.186Z,1492142655.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:15.428Z,1492142655.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:15.594Z,1492142655.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:15.989Z,1492142655.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:16.224Z,1492142656.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:16.395Z,1492142656.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:16.628Z,1492142656.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:16.798Z,1492142656.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:17.194Z,1492142657.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:17.424Z,1492142657.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:17.637Z,1492142657.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:18.035Z,1492142658.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:18.220Z,1492142658.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:18.404Z,1492142658.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:18.624Z,1492142658.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:18.825Z,1492142658.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:19.203Z,1492142659.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:19.420Z,1492142659.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:19.609Z,1492142659.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:20.018Z,1492142660.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:20.216Z,1492142660.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:20.382Z,1492142660.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:20.620Z,1492142660.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:20.782Z,1492142660.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:21.180Z,1492142661.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:21.416Z,1492142661.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:21.583Z,1492142661.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:21.990Z,1492142661.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:22.213Z,1492142662.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:22.437Z,1492142662.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:22.620Z,1492142662.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:23.424Z,1492142663.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:24.220Z,1492142664.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:24.624Z,1492142664.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:25.420Z,1492142665.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:26.216Z,1492142666.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:26.620Z,1492142666.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:26.623Z,1492142666.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:26.757Z,1492142666.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:27.142Z,1492142667.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:27.416Z,1492142667.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:27.542Z,1492142667.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:27.946Z,1492142667.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:28.212Z,1492142668.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:28.342Z,1492142668.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:28.616Z,1492142668.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:28.746Z,1492142668.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:29.189Z,1492142669.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:29.412Z,1492142669.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:29.546Z,1492142669.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:29.941Z,1492142669.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:30.212Z,1492142670.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:30.370Z,1492142670.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:30.385Z,1492142670.385 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:30.386Z,1492142670.386 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:04:30.386Z,1492142670.386 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:04:30.418Z,1492142670.418 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:04:30.616Z,1492142670.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:30.774Z,1492142670.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:30.830Z,1492142670.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:04:30.830Z,1492142670.830 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:04:31.132Z,1492142671.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:31.168Z,1492142671.168 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:04:31.169Z,1492142671.169 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:04:31.169Z,1492142671.169 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:04:31.412Z,1492142671.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:31.578Z,1492142671.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:31.955Z,1492142671.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:32.208Z,1492142672.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:32.386Z,1492142672.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:32.612Z,1492142672.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:32.770Z,1492142672.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:33.185Z,1492142673.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:33.408Z,1492142673.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:33.546Z,1492142673.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:33.975Z,1492142673.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:34.204Z,1492142674.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:34.346Z,1492142674.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:34.608Z,1492142674.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:34.739Z,1492142674.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:35.177Z,1492142675.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:35.404Z,1492142675.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:35.588Z,1492142675.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:35.942Z,1492142675.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:36.202Z,1492142676.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:36.355Z,1492142676.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:36.608Z,1492142676.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:36.786Z,1492142676.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:37.141Z,1492142677.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:37.404Z,1492142677.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:37.558Z,1492142677.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:37.954Z,1492142677.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:38.200Z,1492142678.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:38.374Z,1492142678.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:38.604Z,1492142678.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:38.739Z,1492142678.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:39.159Z,1492142679.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:39.402Z,1492142679.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:39.553Z,1492142679.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:39.968Z,1492142679.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:40.196Z,1492142680.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:40.368Z,1492142680.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:40.600Z,1492142680.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:40.776Z,1492142680.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:41.139Z,1492142681.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:41.396Z,1492142681.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:41.542Z,1492142681.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:41.946Z,1492142681.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:42.192Z,1492142682.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:42.342Z,1492142682.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:42.596Z,1492142682.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:42.734Z,1492142682.734 [BPC1](ERROR): Failed to parse message.
2017-04-14T04:04:42.734Z,1492142682.734 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:04:42.734Z,1492142682.734 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:04:42.734Z,1492142682.734 [BPC1](ERROR): Data Fault
2017-04-14T04:04:42.743Z,1492142682.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:42.787Z,1492142682.787 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:04:43.141Z,1492142683.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:43.392Z,1492142683.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:43.541Z,1492142683.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:43.957Z,1492142683.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:44.001Z,1492142684.001 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:04:44.001Z,1492142684.001 [BPC1] No Fault, FailCount= 1
2017-04-14T04:04:44.188Z,1492142684.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:44.402Z,1492142684.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:44.592Z,1492142684.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:44.794Z,1492142684.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:45.154Z,1492142685.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:45.388Z,1492142685.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:45.543Z,1492142685.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:46.038Z,1492142686.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:46.184Z,1492142686.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:46.354Z,1492142686.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:46.588Z,1492142686.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:46.748Z,1492142686.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:47.145Z,1492142687.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:47.387Z,1492142687.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:47.558Z,1492142687.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:47.972Z,1492142687.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:48.180Z,1492142688.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:48.368Z,1492142688.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:48.584Z,1492142688.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:48.759Z,1492142688.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:49.174Z,1492142689.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:49.380Z,1492142689.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:49.551Z,1492142689.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:49.945Z,1492142689.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:50.177Z,1492142690.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:50.353Z,1492142690.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:50.584Z,1492142690.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:50.774Z,1492142690.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:51.147Z,1492142691.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:51.381Z,1492142691.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:51.558Z,1492142691.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:51.970Z,1492142691.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:52.176Z,1492142692.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:52.370Z,1492142692.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:52.580Z,1492142692.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:52.778Z,1492142692.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:53.146Z,1492142693.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:53.376Z,1492142693.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:53.544Z,1492142693.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:53.999Z,1492142693.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:54.200Z,1492142694.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:54.424Z,1492142694.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:54.606Z,1492142694.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:54.766Z,1492142694.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:55.230Z,1492142695.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:55.400Z,1492142695.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:55.710Z,1492142695.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:56.198Z,1492142696.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:56.251Z,1492142696.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:56.608Z,1492142696.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:56.614Z,1492142696.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:56.917Z,1492142696.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:57.286Z,1492142697.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:57.405Z,1492142697.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:57.674Z,1492142697.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:58.098Z,1492142698.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:58.098Z,1492142698.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:04:58.098Z,1492142698.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:04:58.136Z,1492142698.136 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:58.137Z,1492142698.136 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:04:58.137Z,1492142698.136 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:04:58.200Z,1492142698.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:58.212Z,1492142698.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:04:58.212Z,1492142698.212 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:04:58.557Z,1492142698.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:04:58.557Z,1492142698.557 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:04:58.558Z,1492142698.557 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:04:58.558Z,1492142698.557 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:04:58.604Z,1492142698.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:58.841Z,1492142698.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:04:58.842Z,1492142698.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:04:58.842Z,1492142698.842 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:04:58.851Z,1492142698.851 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:04:58.856Z,1492142698.856 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:04:58.857Z,1492142698.857 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:04:59.262Z,1492142699.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:04:59.400Z,1492142699.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:04:59.644Z,1492142699.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:00.037Z,1492142700.037 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:05:00.037Z,1492142700.037 [BPC1] Communications Fault, FailCount= 2
2017-04-14T04:05:00.037Z,1492142700.037 [BPC1](ERROR): Communications Fault
2017-04-14T04:05:00.046Z,1492142700.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:00.100Z,1492142700.099 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:05:00.196Z,1492142700.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:00.486Z,1492142700.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:00.601Z,1492142700.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:00.843Z,1492142700.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:01.246Z,1492142701.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:01.292Z,1492142701.292 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:05:01.292Z,1492142701.292 [BPC1] No Fault, FailCount= 2
2017-04-14T04:05:01.396Z,1492142701.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:01.775Z,1492142701.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:02.202Z,1492142702.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:02.206Z,1492142702.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:02.608Z,1492142702.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:02.637Z,1492142702.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:02.878Z,1492142702.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:03.273Z,1492142703.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:03.406Z,1492142703.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:03.636Z,1492142703.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:04.117Z,1492142704.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:04.200Z,1492142704.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:04.455Z,1492142704.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:04.604Z,1492142704.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:04.843Z,1492142704.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:05.271Z,1492142705.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:05.400Z,1492142705.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:05.653Z,1492142705.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:06.070Z,1492142706.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:06.200Z,1492142706.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:06.442Z,1492142706.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:06.605Z,1492142706.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:06.834Z,1492142706.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:07.242Z,1492142707.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:07.404Z,1492142707.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:07.638Z,1492142707.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:08.050Z,1492142708.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:08.188Z,1492142708.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:08.448Z,1492142708.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:08.853Z,1492142708.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:08.984Z,1492142708.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:09.247Z,1492142709.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:09.659Z,1492142709.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:09.780Z,1492142709.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:10.080Z,1492142710.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:10.228Z,1492142710.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:10.442Z,1492142710.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:10.845Z,1492142710.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:11.024Z,1492142711.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:11.257Z,1492142711.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:11.663Z,1492142711.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:11.820Z,1492142711.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:12.055Z,1492142712.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:12.300Z,1492142712.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:12.478Z,1492142712.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:12.894Z,1492142712.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:13.096Z,1492142713.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:13.257Z,1492142713.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:13.648Z,1492142713.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:13.892Z,1492142713.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:14.068Z,1492142714.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:14.296Z,1492142714.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:14.482Z,1492142714.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:14.865Z,1492142714.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:15.093Z,1492142715.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:15.264Z,1492142715.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:15.682Z,1492142715.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:15.888Z,1492142715.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:16.126Z,1492142716.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:16.473Z,1492142716.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:16.548Z,1492142716.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:16.878Z,1492142716.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:17.242Z,1492142717.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:17.344Z,1492142717.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:17.679Z,1492142717.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:18.144Z,1492142718.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:18.168Z,1492142718.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:18.479Z,1492142718.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:18.624Z,1492142718.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:18.867Z,1492142718.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:19.364Z,1492142719.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:19.424Z,1492142719.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:19.763Z,1492142719.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:20.101Z,1492142720.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:20.220Z,1492142720.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:20.478Z,1492142720.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:20.624Z,1492142720.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:20.895Z,1492142720.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:21.259Z,1492142721.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:21.420Z,1492142721.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:21.653Z,1492142721.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:22.065Z,1492142722.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:22.200Z,1492142722.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:22.465Z,1492142722.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:22.997Z,1492142722.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:23.792Z,1492142723.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:24.196Z,1492142724.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:24.992Z,1492142724.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:25.788Z,1492142725.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:26.188Z,1492142726.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:26.192Z,1492142726.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:26.319Z,1492142726.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:26.696Z,1492142726.696 [BPC1](ERROR): Failed to parse message.
2017-04-14T04:05:26.696Z,1492142726.696 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:05:26.696Z,1492142726.696 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:05:26.696Z,1492142726.696 [BPC1](ERROR): Data Fault
2017-04-14T04:05:26.721Z,1492142726.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:26.761Z,1492142726.761 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:05:26.988Z,1492142726.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:27.126Z,1492142727.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:27.515Z,1492142727.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:27.784Z,1492142727.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:27.941Z,1492142727.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:28.050Z,1492142728.050 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:05:28.050Z,1492142728.050 [BPC1] No Fault, FailCount= 1
2017-04-14T04:05:28.240Z,1492142728.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:28.362Z,1492142728.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:28.710Z,1492142728.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:29.036Z,1492142729.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:29.142Z,1492142729.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:29.512Z,1492142729.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:29.832Z,1492142729.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:29.918Z,1492142729.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:30.324Z,1492142730.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:30.480Z,1492142730.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:30.719Z,1492142730.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:31.124Z,1492142731.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:31.276Z,1492142731.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:31.525Z,1492142731.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:31.923Z,1492142731.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:32.072Z,1492142732.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:32.313Z,1492142732.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:32.508Z,1492142732.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:32.719Z,1492142732.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:33.104Z,1492142733.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:33.304Z,1492142733.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:33.516Z,1492142733.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:33.917Z,1492142733.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:34.102Z,1492142734.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:34.317Z,1492142734.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:34.508Z,1492142734.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:34.716Z,1492142734.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:35.117Z,1492142735.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:35.304Z,1492142735.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:35.517Z,1492142735.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:35.916Z,1492142735.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:36.100Z,1492142736.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:36.320Z,1492142736.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:36.504Z,1492142736.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:36.724Z,1492142736.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:37.120Z,1492142737.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:37.300Z,1492142737.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:37.505Z,1492142737.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:37.910Z,1492142737.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:38.096Z,1492142738.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:38.310Z,1492142738.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:38.500Z,1492142738.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:38.704Z,1492142738.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:39.110Z,1492142739.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:39.296Z,1492142739.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:39.523Z,1492142739.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:39.906Z,1492142739.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:40.092Z,1492142740.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:40.310Z,1492142740.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:40.496Z,1492142740.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:40.708Z,1492142740.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:41.131Z,1492142741.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:41.292Z,1492142741.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:41.524Z,1492142741.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:41.934Z,1492142741.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:42.088Z,1492142742.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:42.334Z,1492142742.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:42.492Z,1492142742.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:42.704Z,1492142742.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:43.151Z,1492142743.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:43.288Z,1492142743.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:43.542Z,1492142743.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:43.945Z,1492142743.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:44.084Z,1492142744.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:44.372Z,1492142744.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:44.488Z,1492142744.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:44.753Z,1492142744.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:45.176Z,1492142745.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:45.288Z,1492142745.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:45.610Z,1492142745.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:45.941Z,1492142745.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:46.084Z,1492142746.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:46.333Z,1492142746.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:46.564Z,1492142746.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:46.736Z,1492142746.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:47.123Z,1492142747.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:47.364Z,1492142747.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:47.547Z,1492142747.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:47.934Z,1492142747.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:48.160Z,1492142748.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:48.326Z,1492142748.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:48.564Z,1492142748.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:48.744Z,1492142748.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:49.103Z,1492142749.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:49.361Z,1492142749.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:49.546Z,1492142749.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:49.910Z,1492142749.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:50.140Z,1492142750.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:50.352Z,1492142750.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:50.721Z,1492142750.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:50.936Z,1492142750.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:51.110Z,1492142751.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:51.512Z,1492142751.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:51.734Z,1492142751.734 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:51.908Z,1492142751.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:52.140Z,1492142752.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:52.308Z,1492142752.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:52.747Z,1492142752.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:52.936Z,1492142752.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:53.107Z,1492142753.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:53.513Z,1492142753.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:53.733Z,1492142753.733 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:53.907Z,1492142753.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:54.141Z,1492142754.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:54.313Z,1492142754.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:54.719Z,1492142754.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:54.936Z,1492142754.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:55.178Z,1492142755.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:55.735Z,1492142755.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:55.766Z,1492142755.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:55.996Z,1492142755.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:56.288Z,1492142756.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:56.421Z,1492142756.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:56.839Z,1492142756.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:57.084Z,1492142757.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:57.267Z,1492142757.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:57.635Z,1492142757.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:57.881Z,1492142757.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:58.137Z,1492142758.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:58.602Z,1492142758.602 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:58.607Z,1492142758.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:59.014Z,1492142759.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:59.339Z,1492142759.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:05:59.407Z,1492142759.407 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:05:59.815Z,1492142759.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:00.186Z,1492142760.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:00.202Z,1492142760.202 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:00.608Z,1492142760.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:00.713Z,1492142760.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:00.982Z,1492142760.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:01.377Z,1492142761.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:01.412Z,1492142761.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:01.902Z,1492142761.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:02.208Z,1492142762.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:02.472Z,1492142762.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:02.616Z,1492142762.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:02.801Z,1492142762.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:03.139Z,1492142763.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:03.420Z,1492142763.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:03.760Z,1492142763.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:04.070Z,1492142764.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:04.216Z,1492142764.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:04.430Z,1492142764.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:04.620Z,1492142764.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:04.822Z,1492142764.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:05.251Z,1492142765.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:05.416Z,1492142765.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:05.698Z,1492142765.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:06.034Z,1492142766.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:06.188Z,1492142766.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:06.430Z,1492142766.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:06.818Z,1492142766.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:06.984Z,1492142766.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:07.253Z,1492142767.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:07.717Z,1492142767.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:07.780Z,1492142767.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:08.036Z,1492142768.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:08.184Z,1492142768.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:08.413Z,1492142768.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:08.808Z,1492142768.807 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:06:08.808Z,1492142768.808 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:06:08.808Z,1492142768.808 [BPC1](ERROR): Data Fault
2017-04-14T04:06:08.817Z,1492142768.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:08.926Z,1492142768.926 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:06:08.984Z,1492142768.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:09.407Z,1492142769.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:09.759Z,1492142769.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:09.780Z,1492142769.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:10.037Z,1492142770.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:10.082Z,1492142770.082 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:06:10.082Z,1492142770.082 [BPC1] No Fault, FailCount= 1
2017-04-14T04:06:10.252Z,1492142770.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:10.518Z,1492142770.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:10.858Z,1492142770.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:11.050Z,1492142771.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:11.219Z,1492142771.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:11.638Z,1492142771.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:11.844Z,1492142771.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:12.138Z,1492142772.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:12.449Z,1492142772.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:12.476Z,1492142772.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:12.939Z,1492142772.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:13.284Z,1492142773.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:13.327Z,1492142773.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:13.625Z,1492142773.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:14.080Z,1492142774.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:14.137Z,1492142774.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:14.461Z,1492142774.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:14.512Z,1492142774.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:14.880Z,1492142774.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:15.244Z,1492142775.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:15.310Z,1492142775.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:15.695Z,1492142775.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:16.048Z,1492142776.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:16.104Z,1492142776.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:16.444Z,1492142776.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:16.509Z,1492142776.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:16.812Z,1492142776.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:17.213Z,1492142777.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:17.304Z,1492142777.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:17.698Z,1492142777.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:18.068Z,1492142778.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:18.101Z,1492142778.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:18.435Z,1492142778.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:18.508Z,1492142778.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:18.834Z,1492142778.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:19.228Z,1492142779.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:19.304Z,1492142779.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:19.710Z,1492142779.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:20.040Z,1492142780.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:20.100Z,1492142780.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:20.417Z,1492142780.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:20.504Z,1492142780.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:20.815Z,1492142780.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:21.218Z,1492142781.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:21.301Z,1492142781.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:21.694Z,1492142781.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:22.021Z,1492142782.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:22.096Z,1492142782.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:22.414Z,1492142782.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:22.500Z,1492142782.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:22.848Z,1492142782.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:23.296Z,1492142783.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:24.092Z,1492142784.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:24.496Z,1492142784.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:25.294Z,1492142785.294 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:26.092Z,1492142786.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:26.500Z,1492142786.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:27.276Z,1492142787.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:27.296Z,1492142787.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:27.388Z,1492142787.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:27.798Z,1492142787.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:28.092Z,1492142788.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:28.182Z,1492142788.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:28.496Z,1492142788.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:28.621Z,1492142788.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:29.012Z,1492142789.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:29.292Z,1492142789.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:29.383Z,1492142789.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:29.775Z,1492142789.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:30.068Z,1492142790.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:30.186Z,1492142790.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:30.581Z,1492142790.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:30.864Z,1492142790.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:30.981Z,1492142790.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:31.387Z,1492142791.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:31.666Z,1492142791.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:31.788Z,1492142791.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:32.072Z,1492142792.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:32.186Z,1492142792.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:32.584Z,1492142792.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:32.869Z,1492142792.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:32.970Z,1492142792.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:33.384Z,1492142793.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:33.666Z,1492142793.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:33.798Z,1492142793.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:34.073Z,1492142794.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:34.184Z,1492142794.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:34.584Z,1492142794.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:34.868Z,1492142794.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:34.985Z,1492142794.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:35.358Z,1492142795.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:35.664Z,1492142795.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:35.786Z,1492142795.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:36.068Z,1492142796.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:36.168Z,1492142796.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:36.574Z,1492142796.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:36.864Z,1492142796.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:36.978Z,1492142796.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:37.373Z,1492142797.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:37.664Z,1492142797.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:37.775Z,1492142797.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:38.088Z,1492142798.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:38.177Z,1492142798.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:38.578Z,1492142798.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:38.884Z,1492142798.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:38.983Z,1492142798.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:39.380Z,1492142799.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:39.680Z,1492142799.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:39.784Z,1492142799.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:40.181Z,1492142800.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:40.400Z,1492142800.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:40.589Z,1492142800.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:41.051Z,1492142801.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:41.196Z,1492142801.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:41.422Z,1492142801.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:41.801Z,1492142801.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:41.992Z,1492142801.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:42.195Z,1492142802.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:42.404Z,1492142802.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:42.599Z,1492142802.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:43.006Z,1492142803.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:43.200Z,1492142803.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:43.407Z,1492142803.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:43.778Z,1492142803.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:43.996Z,1492142803.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:44.182Z,1492142804.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:44.400Z,1492142804.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:44.578Z,1492142804.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:44.981Z,1492142804.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:45.198Z,1492142805.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:45.383Z,1492142805.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:45.819Z,1492142805.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:45.992Z,1492142805.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:46.184Z,1492142806.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:46.396Z,1492142806.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:46.584Z,1492142806.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:46.985Z,1492142806.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:47.192Z,1492142807.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:47.361Z,1492142807.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:47.798Z,1492142807.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:47.988Z,1492142807.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:48.190Z,1492142808.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:48.392Z,1492142808.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:48.575Z,1492142808.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:49.002Z,1492142809.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:49.188Z,1492142809.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:49.421Z,1492142809.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:49.790Z,1492142809.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:49.992Z,1492142809.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:50.204Z,1492142810.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:50.396Z,1492142810.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:50.604Z,1492142810.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:50.981Z,1492142810.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:51.193Z,1492142811.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:51.379Z,1492142811.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:51.811Z,1492142811.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:51.988Z,1492142811.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:52.181Z,1492142812.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:52.392Z,1492142812.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:52.582Z,1492142812.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:52.976Z,1492142812.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:53.188Z,1492142813.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:53.385Z,1492142813.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:53.788Z,1492142813.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:53.984Z,1492142813.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:54.179Z,1492142814.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:54.388Z,1492142814.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:54.589Z,1492142814.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:54.981Z,1492142814.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:55.184Z,1492142815.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:55.426Z,1492142815.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:55.844Z,1492142815.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:55.980Z,1492142815.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:56.204Z,1492142816.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:56.392Z,1492142816.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:56.602Z,1492142816.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:57.011Z,1492142817.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:57.189Z,1492142817.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:57.422Z,1492142817.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:57.802Z,1492142817.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:57.984Z,1492142817.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:58.181Z,1492142818.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:58.388Z,1492142818.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:58.580Z,1492142818.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:59.014Z,1492142819.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:59.184Z,1492142819.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:06:59.382Z,1492142819.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:59.788Z,1492142819.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:06:59.984Z,1492142819.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:00.192Z,1492142820.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:00.388Z,1492142820.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:00.602Z,1492142820.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:00.986Z,1492142820.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:01.184Z,1492142821.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:01.388Z,1492142821.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:01.790Z,1492142821.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:01.980Z,1492142821.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:02.198Z,1492142822.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:02.384Z,1492142822.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:02.571Z,1492142822.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:02.996Z,1492142822.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:03.180Z,1492142823.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:03.417Z,1492142823.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:03.847Z,1492142823.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:03.976Z,1492142823.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:04.213Z,1492142824.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:04.380Z,1492142824.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:04.599Z,1492142824.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:04.997Z,1492142824.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:05.178Z,1492142825.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:05.374Z,1492142825.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:05.802Z,1492142825.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:05.972Z,1492142825.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:06.188Z,1492142826.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:06.376Z,1492142826.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:06.576Z,1492142826.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:06.983Z,1492142826.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:07.172Z,1492142827.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:07.385Z,1492142827.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:07.786Z,1492142827.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:07.968Z,1492142827.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:08.195Z,1492142828.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:08.372Z,1492142828.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:08.591Z,1492142828.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:08.978Z,1492142828.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:09.168Z,1492142829.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:09.380Z,1492142829.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:09.832Z,1492142829.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:09.964Z,1492142829.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:10.214Z,1492142830.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:10.376Z,1492142830.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:10.572Z,1492142830.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:11.032Z,1492142831.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:11.172Z,1492142831.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:11.423Z,1492142831.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:11.803Z,1492142831.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:11.968Z,1492142831.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:12.233Z,1492142832.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:12.372Z,1492142832.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:12.576Z,1492142832.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:12.978Z,1492142832.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:13.168Z,1492142833.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:13.373Z,1492142833.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:13.778Z,1492142833.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:13.964Z,1492142833.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:14.184Z,1492142834.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:14.368Z,1492142834.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:14.585Z,1492142834.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:14.984Z,1492142834.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:15.169Z,1492142835.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:15.398Z,1492142835.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:15.785Z,1492142835.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:15.964Z,1492142835.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:16.184Z,1492142836.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:16.368Z,1492142836.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:16.584Z,1492142836.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:16.998Z,1492142836.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:17.164Z,1492142837.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:17.407Z,1492142837.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:17.812Z,1492142837.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:17.960Z,1492142837.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:18.250Z,1492142838.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:18.368Z,1492142838.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:18.642Z,1492142838.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:19.028Z,1492142839.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:19.164Z,1492142839.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:19.459Z,1492142839.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:19.898Z,1492142839.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:19.960Z,1492142839.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:20.217Z,1492142840.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:20.364Z,1492142840.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:20.670Z,1492142840.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:21.036Z,1492142841.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:21.160Z,1492142841.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:21.387Z,1492142841.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:21.820Z,1492142841.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:21.829Z,1492142841.829 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:07:21.829Z,1492142841.829 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:07:21.829Z,1492142841.829 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:07:21.829Z,1492142841.829 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:07:21.956Z,1492142841.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:22.186Z,1492142842.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:22.194Z,1492142842.194 [Default:CheckIn:D] Stopped
2017-04-14T04:07:22.195Z,1492142842.195 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:07:22.360Z,1492142842.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:22.606Z,1492142842.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:22.637Z,1492142842.637 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.281266 min 
2017-04-14T04:07:22.637Z,1492142842.637 [Default:CheckIn:E] Stopped
2017-04-14T04:07:22.637Z,1492142842.637 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:07:22.637Z,1492142842.638 [Default:CheckIn] Stopped
2017-04-14T04:07:22.638Z,1492142842.638 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:07:22.638Z,1492142842.638 [Default:CheckIn](INFO): Running loop #7
2017-04-14T04:07:22.638Z,1492142842.638 [Default:CheckIn] Running Loop=7
2017-04-14T04:07:22.638Z,1492142842.638 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:07:22.638Z,1492142842.638 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:07:22.988Z,1492142842.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:23.164Z,1492142843.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:23.968Z,1492142843.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:24.382Z,1492142844.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:25.176Z,1492142845.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:25.974Z,1492142845.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:26.384Z,1492142846.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:27.182Z,1492142847.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:27.849Z,1492142847.849 [NAL9602](INFO): Powering up
2017-04-14T04:07:27.946Z,1492142847.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:27.976Z,1492142847.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:28.067Z,1492142848.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:28.380Z,1492142848.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:28.480Z,1492142848.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:28.898Z,1492142848.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:29.177Z,1492142849.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:29.262Z,1492142849.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:29.691Z,1492142849.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:29.956Z,1492142849.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:30.090Z,1492142850.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:30.458Z,1492142850.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:30.752Z,1492142850.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:30.884Z,1492142850.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:31.263Z,1492142851.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:31.270Z,1492142851.270 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:31.270Z,1492142851.270 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:07:31.270Z,1492142851.270 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:07:31.308Z,1492142851.309 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:07:31.548Z,1492142851.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:31.765Z,1492142851.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:31.845Z,1492142851.845 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:07:31.845Z,1492142851.845 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:07:31.960Z,1492142851.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:32.071Z,1492142852.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:32.077Z,1492142852.077 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:07:32.078Z,1492142852.078 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:07:32.078Z,1492142852.078 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:07:32.463Z,1492142852.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:32.758Z,1492142852.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:32.867Z,1492142852.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:33.265Z,1492142853.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:33.553Z,1492142853.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:33.670Z,1492142853.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:34.060Z,1492142854.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:34.068Z,1492142854.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:34.472Z,1492142854.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:34.856Z,1492142854.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:34.870Z,1492142854.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:35.318Z,1492142855.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:35.668Z,1492142855.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:35.687Z,1492142855.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:36.068Z,1492142856.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:36.292Z,1492142856.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:36.523Z,1492142856.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:36.933Z,1492142856.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:37.088Z,1492142857.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:37.286Z,1492142857.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:37.667Z,1492142857.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:37.884Z,1492142857.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:38.067Z,1492142858.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:38.308Z,1492142858.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:38.476Z,1492142858.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:38.826Z,1492142858.826 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:07:38.874Z,1492142858.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:39.104Z,1492142859.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:39.274Z,1492142859.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:39.687Z,1492142859.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:39.900Z,1492142859.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:40.078Z,1492142860.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:40.304Z,1492142860.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:40.478Z,1492142860.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:40.868Z,1492142860.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:41.101Z,1492142861.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:41.280Z,1492142861.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:41.732Z,1492142861.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:41.896Z,1492142861.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:42.074Z,1492142862.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:42.300Z,1492142862.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:42.506Z,1492142862.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:42.880Z,1492142862.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:43.096Z,1492142863.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:43.254Z,1492142863.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:43.701Z,1492142863.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:43.892Z,1492142863.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:44.066Z,1492142864.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:44.296Z,1492142864.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:44.493Z,1492142864.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:44.914Z,1492142864.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:45.092Z,1492142865.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:45.301Z,1492142865.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:45.686Z,1492142865.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:45.893Z,1492142865.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:46.138Z,1492142866.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:46.300Z,1492142866.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:46.472Z,1492142866.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:46.880Z,1492142866.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:47.096Z,1492142867.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:47.258Z,1492142867.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:47.734Z,1492142867.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:47.892Z,1492142867.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:48.093Z,1492142868.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:48.296Z,1492142868.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:48.520Z,1492142868.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:48.899Z,1492142868.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:49.092Z,1492142869.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:49.348Z,1492142869.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:49.766Z,1492142869.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:49.888Z,1492142869.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:50.090Z,1492142870.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:50.496Z,1492142870.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:50.684Z,1492142870.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:50.947Z,1492142870.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:51.104Z,1492142871.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:51.444Z,1492142871.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:51.734Z,1492142871.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:51.900Z,1492142871.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:52.282Z,1492142872.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:52.472Z,1492142872.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:52.705Z,1492142872.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:52.960Z,1492142872.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:53.268Z,1492142873.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:53.344Z,1492142873.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:53.818Z,1492142873.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:53.952Z,1492142873.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:54.140Z,1492142874.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:54.556Z,1492142874.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:54.748Z,1492142874.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:54.988Z,1492142874.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:55.302Z,1492142875.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:55.544Z,1492142875.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:55.837Z,1492142875.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:56.044Z,1492142876.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:56.188Z,1492142876.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:56.592Z,1492142876.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:56.840Z,1492142876.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:57.019Z,1492142877.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:57.340Z,1492142877.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:57.636Z,1492142877.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:57.763Z,1492142877.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:58.040Z,1492142878.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:58.134Z,1492142878.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:58.591Z,1492142878.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:58.841Z,1492142878.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:59.035Z,1492142879.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:59.035Z,1492142879.035 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:07:59.035Z,1492142879.035 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:07:59.058Z,1492142879.058 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:07:59.058Z,1492142879.058 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:07:59.058Z,1492142879.058 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:07:59.135Z,1492142879.135 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:07:59.136Z,1492142879.136 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:07:59.388Z,1492142879.388 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:07:59.388Z,1492142879.388 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:07:59.389Z,1492142879.389 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:07:59.389Z,1492142879.389 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:07:59.640Z,1492142879.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:07:59.801Z,1492142879.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:07:59.801Z,1492142879.801 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:07:59.802Z,1492142879.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:07:59.815Z,1492142879.815 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:07:59.824Z,1492142879.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:07:59.824Z,1492142879.824 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:08:00.044Z,1492142880.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:00.139Z,1492142880.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:00.528Z,1492142880.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:00.840Z,1492142880.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:00.925Z,1492142880.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:01.360Z,1492142881.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:01.636Z,1492142881.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:01.772Z,1492142881.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:02.040Z,1492142882.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:02.115Z,1492142882.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:02.522Z,1492142882.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:02.836Z,1492142882.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:02.909Z,1492142882.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:03.307Z,1492142883.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:03.634Z,1492142883.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:03.718Z,1492142883.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:04.113Z,1492142884.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:04.268Z,1492142884.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:04.515Z,1492142884.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:04.916Z,1492142884.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:05.064Z,1492142885.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:05.318Z,1492142885.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:05.715Z,1492142885.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:05.860Z,1492142885.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:06.115Z,1492142886.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:06.280Z,1492142886.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:06.522Z,1492142886.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:06.923Z,1492142886.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:07.076Z,1492142887.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:07.315Z,1492142887.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:07.731Z,1492142887.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:07.872Z,1492142887.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:08.125Z,1492142888.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:08.276Z,1492142888.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:08.518Z,1492142888.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:08.973Z,1492142888.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:09.072Z,1492142889.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:09.339Z,1492142889.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:09.715Z,1492142889.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:09.868Z,1492142889.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:10.142Z,1492142890.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:10.272Z,1492142890.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:10.520Z,1492142890.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:10.975Z,1492142890.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:11.068Z,1492142891.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:11.338Z,1492142891.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:11.715Z,1492142891.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:11.864Z,1492142891.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:12.088Z,1492142892.088 [NAL9602](INFO): SBD MO Status=0, MOMSN=2100, MT Status=0, MTMSN=0
2017-04-14T04:08:12.089Z,1492142892.089 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:08:12.174Z,1492142892.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:12.268Z,1492142892.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:12.512Z,1492142892.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:12.982Z,1492142892.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:13.064Z,1492142893.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:13.268Z,1492142893.268 [NAL9602](INFO): GPS fix at 20170414T040816: (36.802332, -121.787149)
2017-04-14T04:08:13.370Z,1492142893.370 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:08:13.370Z,1492142893.370 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:08:13.730Z,1492142893.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:13.730Z,1492142893.730 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:08:13.730Z,1492142893.730 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:08:13.761Z,1492142893.761 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:13.761Z,1492142893.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:08:13.761Z,1492142893.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:08:13.793Z,1492142893.793 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:08:13.793Z,1492142893.793 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:08:13.860Z,1492142893.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:14.260Z,1492142894.260 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:08:14.261Z,1492142894.260 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:08:14.261Z,1492142894.261 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:08:14.261Z,1492142894.261 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:08:14.268Z,1492142894.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:14.614Z,1492142894.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:08:14.623Z,1492142894.622 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:08:14.652Z,1492142894.652 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:08:14.660Z,1492142894.659 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:08:14.660Z,1492142894.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:08:14.660Z,1492142894.660 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:08:15.064Z,1492142895.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:15.860Z,1492142895.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:16.268Z,1492142896.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:17.064Z,1492142897.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:17.860Z,1492142897.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:18.264Z,1492142898.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:18.923Z,1492142898.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:19.060Z,1492142899.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:19.068Z,1492142899.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:19.465Z,1492142899.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:19.857Z,1492142899.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:19.893Z,1492142899.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:20.204Z,1492142900.204 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0032.lzma
2017-04-14T04:08:20.260Z,1492142900.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:20.285Z,1492142900.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:20.647Z,1492142900.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:20.998Z,1492142900.998 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0032.lzma.bak
2017-04-14T04:08:20.998Z,1492142900.998 [DataOverHttps](INFO): SBD MOMSN=4885126
2017-04-14T04:08:21.056Z,1492142901.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:21.064Z,1492142901.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:21.565Z,1492142901.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:21.852Z,1492142901.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:21.878Z,1492142901.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:22.256Z,1492142902.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:23.052Z,1492142903.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:23.848Z,1492142903.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:24.252Z,1492142904.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:25.048Z,1492142905.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:25.844Z,1492142905.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:26.248Z,1492142906.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:26.573Z,1492142906.573 [NAL9602](INFO): Powering down
2017-04-14T04:08:26.789Z,1492142906.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:27.000Z,1492142907.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:27.048Z,1492142907.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:27.385Z,1492142907.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:27.844Z,1492142907.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:27.865Z,1492142907.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:28.226Z,1492142908.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:28.248Z,1492142908.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:28.630Z,1492142908.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:29.044Z,1492142909.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:29.840Z,1492142909.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:30.245Z,1492142910.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:31.040Z,1492142911.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:31.836Z,1492142911.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:32.240Z,1492142912.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:33.036Z,1492142913.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:33.408Z,1492142913.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:33.496Z,1492142913.496 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0033.lzma
2017-04-14T04:08:33.552Z,1492142913.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:33.832Z,1492142913.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:33.962Z,1492142913.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:34.236Z,1492142914.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:34.301Z,1492142914.301 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0033.lzma.bak
2017-04-14T04:08:34.302Z,1492142914.302 [DataOverHttps](INFO): SBD MOMSN=4885129
2017-04-14T04:08:34.361Z,1492142914.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:34.795Z,1492142914.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:34.836Z,1492142914.836 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:08:34.836Z,1492142914.836 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:08:34.836Z,1492142914.836 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:08:35.032Z,1492142915.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:35.145Z,1492142915.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:35.828Z,1492142915.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:36.232Z,1492142916.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:37.029Z,1492142917.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:37.824Z,1492142917.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:38.228Z,1492142918.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:39.024Z,1492142919.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:39.536Z,1492142919.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:39.710Z,1492142919.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:39.822Z,1492142919.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:40.070Z,1492142920.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:40.240Z,1492142920.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:40.447Z,1492142920.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:40.842Z,1492142920.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:41.036Z,1492142921.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:41.271Z,1492142921.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:41.608Z,1492142921.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:41.832Z,1492142921.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:42.056Z,1492142922.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:42.236Z,1492142922.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:42.418Z,1492142922.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:42.818Z,1492142922.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:43.034Z,1492142923.034 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:43.255Z,1492142923.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:43.629Z,1492142923.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:43.828Z,1492142923.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:44.024Z,1492142924.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:44.232Z,1492142924.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:44.424Z,1492142924.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:44.822Z,1492142924.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:45.028Z,1492142925.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:45.251Z,1492142925.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:45.770Z,1492142925.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:45.824Z,1492142925.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:46.091Z,1492142926.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:46.280Z,1492142926.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:46.454Z,1492142926.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:46.852Z,1492142926.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:47.076Z,1492142927.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:47.306Z,1492142927.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:47.680Z,1492142927.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:47.872Z,1492142927.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:48.051Z,1492142928.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:48.276Z,1492142928.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:48.440Z,1492142928.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:48.876Z,1492142928.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:49.072Z,1492142929.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:49.282Z,1492142929.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:49.638Z,1492142929.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:49.872Z,1492142929.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:50.062Z,1492142930.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:50.276Z,1492142930.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:50.415Z,1492142930.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:50.866Z,1492142930.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:51.072Z,1492142931.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:51.212Z,1492142931.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:51.648Z,1492142931.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:51.840Z,1492142931.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:52.018Z,1492142932.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:52.415Z,1492142932.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:52.637Z,1492142932.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:52.831Z,1492142932.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:53.217Z,1492142933.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:53.432Z,1492142933.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:53.628Z,1492142933.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:53.838Z,1492142933.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:54.018Z,1492142934.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:54.414Z,1492142934.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:54.632Z,1492142934.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:54.826Z,1492142934.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:55.234Z,1492142935.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:55.428Z,1492142935.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:55.618Z,1492142935.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:55.848Z,1492142935.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:56.013Z,1492142936.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:56.428Z,1492142936.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:56.645Z,1492142936.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:56.827Z,1492142936.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:57.216Z,1492142937.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:57.442Z,1492142937.442 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:57.624Z,1492142937.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:57.884Z,1492142937.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:58.049Z,1492142938.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:58.427Z,1492142938.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:58.681Z,1492142938.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:58.821Z,1492142938.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:59.262Z,1492142939.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:08:59.476Z,1492142939.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:08:59.619Z,1492142939.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:00.046Z,1492142940.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:00.168Z,1492142940.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:00.412Z,1492142940.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:00.818Z,1492142940.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:00.964Z,1492142940.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:01.257Z,1492142941.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:01.741Z,1492142941.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:01.760Z,1492142941.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:02.047Z,1492142942.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:02.218Z,1492142942.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:02.417Z,1492142942.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:02.859Z,1492142942.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:03.012Z,1492142943.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:03.217Z,1492142943.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:03.615Z,1492142943.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:03.808Z,1492142943.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:04.063Z,1492142944.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:04.216Z,1492142944.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:04.431Z,1492142944.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:04.826Z,1492142944.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:05.012Z,1492142945.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:05.228Z,1492142945.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:05.623Z,1492142945.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:05.808Z,1492142945.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:06.034Z,1492142946.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:06.212Z,1492142946.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:06.434Z,1492142946.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:06.830Z,1492142946.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:07.009Z,1492142947.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:07.261Z,1492142947.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:07.621Z,1492142947.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:07.804Z,1492142947.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:08.054Z,1492142948.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:08.208Z,1492142948.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:08.449Z,1492142948.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:08.871Z,1492142948.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:09.004Z,1492142949.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:09.237Z,1492142949.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:09.626Z,1492142949.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:09.800Z,1492142949.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:10.031Z,1492142950.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:10.206Z,1492142950.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:10.426Z,1492142950.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:10.818Z,1492142950.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:11.000Z,1492142951.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:11.228Z,1492142951.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:11.632Z,1492142951.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:11.796Z,1492142951.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:12.032Z,1492142952.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:12.204Z,1492142952.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:12.440Z,1492142952.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:12.835Z,1492142952.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:12.000Z,1492142953.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:13.231Z,1492142953.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:13.633Z,1492142953.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:13.796Z,1492142953.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:14.072Z,1492142954.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:14.244Z,1492142954.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:14.442Z,1492142954.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:14.930Z,1492142954.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:15.040Z,1492142955.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:15.283Z,1492142955.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:15.723Z,1492142955.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:15.836Z,1492142955.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:16.045Z,1492142956.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:16.240Z,1492142956.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:16.467Z,1492142956.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:16.882Z,1492142956.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:17.036Z,1492142957.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:17.235Z,1492142957.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:17.624Z,1492142957.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:17.832Z,1492142957.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:18.034Z,1492142958.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:18.236Z,1492142958.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:18.452Z,1492142958.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:18.859Z,1492142958.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:19.032Z,1492142959.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:19.248Z,1492142959.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:19.632Z,1492142959.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:19.828Z,1492142959.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:20.071Z,1492142960.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:20.232Z,1492142960.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:20.430Z,1492142960.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:20.822Z,1492142960.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:21.028Z,1492142961.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:21.219Z,1492142961.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:21.613Z,1492142961.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:21.792Z,1492142961.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:22.064Z,1492142962.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:22.445Z,1492142962.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:22.588Z,1492142962.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:22.816Z,1492142962.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:23.226Z,1492142963.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:23.384Z,1492142963.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:23.629Z,1492142963.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:23.801Z,1492142963.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:24.014Z,1492142964.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:24.447Z,1492142964.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:24.596Z,1492142964.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:24.849Z,1492142964.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:25.239Z,1492142965.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:25.405Z,1492142965.405 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:25.632Z,1492142965.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:25.864Z,1492142965.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:26.037Z,1492142966.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:26.429Z,1492142966.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:26.660Z,1492142966.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:26.824Z,1492142966.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:27.223Z,1492142967.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:27.456Z,1492142967.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:27.746Z,1492142967.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:28.038Z,1492142968.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:28.200Z,1492142968.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:28.444Z,1492142968.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:28.913Z,1492142968.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:28.996Z,1492142968.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:29.224Z,1492142969.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:29.694Z,1492142969.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:29.792Z,1492142969.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:30.048Z,1492142970.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:30.197Z,1492142970.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:30.422Z,1492142970.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:30.839Z,1492142970.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:30.992Z,1492142970.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:31.257Z,1492142971.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:31.627Z,1492142971.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:31.796Z,1492142971.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:32.025Z,1492142972.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:32.200Z,1492142972.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:32.433Z,1492142972.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:32.850Z,1492142972.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:32.997Z,1492142972.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:33.228Z,1492142973.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:33.618Z,1492142973.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:33.783Z,1492142973.783 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:34.022Z,1492142974.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:34.414Z,1492142974.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:34.580Z,1492142974.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:34.820Z,1492142974.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:35.230Z,1492142975.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:35.378Z,1492142975.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:35.788Z,1492142975.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:36.585Z,1492142976.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:37.380Z,1492142977.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:37.832Z,1492142977.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:38.629Z,1492142978.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:39.428Z,1492142979.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:39.908Z,1492142979.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:40.704Z,1492142980.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:41.386Z,1492142981.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:41.500Z,1492142981.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:41.524Z,1492142981.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:41.884Z,1492142981.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:42.104Z,1492142982.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:42.270Z,1492142982.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:42.680Z,1492142982.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:42.908Z,1492142982.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:43.071Z,1492142983.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:43.544Z,1492142983.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:43.704Z,1492142983.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:43.868Z,1492142983.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:44.120Z,1492142984.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:44.299Z,1492142984.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:44.662Z,1492142984.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:44.916Z,1492142984.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:45.115Z,1492142985.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:45.505Z,1492142985.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:45.712Z,1492142985.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:45.902Z,1492142985.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:46.116Z,1492142986.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:46.298Z,1492142986.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:46.669Z,1492142986.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:46.912Z,1492142986.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:47.121Z,1492142987.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:47.470Z,1492142987.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:47.708Z,1492142987.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:47.892Z,1492142987.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:48.112Z,1492142988.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:48.281Z,1492142988.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:48.673Z,1492142988.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:48.908Z,1492142988.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:49.083Z,1492142989.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:49.558Z,1492142989.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:49.704Z,1492142989.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:49.866Z,1492142989.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:50.108Z,1492142990.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:50.296Z,1492142990.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:50.707Z,1492142990.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:50.904Z,1492142990.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:51.104Z,1492142991.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:51.478Z,1492142991.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:51.700Z,1492142991.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:51.875Z,1492142991.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:52.104Z,1492142992.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:52.282Z,1492142992.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:52.677Z,1492142992.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:52.900Z,1492142992.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:53.078Z,1492142993.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:53.518Z,1492142993.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:53.699Z,1492142993.699 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:53.929Z,1492142993.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:54.104Z,1492142994.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:54.302Z,1492142994.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:54.677Z,1492142994.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:54.900Z,1492142994.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:55.074Z,1492142995.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:55.468Z,1492142995.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:55.696Z,1492142995.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:55.866Z,1492142995.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:56.128Z,1492142996.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:56.282Z,1492142996.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:56.672Z,1492142996.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:56.924Z,1492142996.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:57.073Z,1492142997.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:57.483Z,1492142997.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:57.721Z,1492142997.721 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:57.933Z,1492142997.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:58.125Z,1492142998.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:58.281Z,1492142998.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:58.692Z,1492142998.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:58.920Z,1492142998.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:59.062Z,1492142999.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:59.544Z,1492142999.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:09:59.716Z,1492142999.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:09:59.905Z,1492142999.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:00.120Z,1492143000.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:00.304Z,1492143000.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:00.667Z,1492143000.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:00.916Z,1492143000.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:01.070Z,1492143001.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:01.476Z,1492143001.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:01.716Z,1492143001.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:01.880Z,1492143001.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:02.120Z,1492143002.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:02.285Z,1492143002.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:02.654Z,1492143002.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:02.920Z,1492143002.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:03.086Z,1492143003.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:03.486Z,1492143003.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:03.717Z,1492143003.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:03.888Z,1492143003.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:04.124Z,1492143004.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:04.263Z,1492143004.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:04.699Z,1492143004.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:04.922Z,1492143004.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:05.064Z,1492143005.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:05.540Z,1492143005.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:05.716Z,1492143005.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:05.873Z,1492143005.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:06.121Z,1492143006.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:06.274Z,1492143006.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:06.674Z,1492143006.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:06.916Z,1492143006.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:07.081Z,1492143007.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:07.502Z,1492143007.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:07.714Z,1492143007.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:07.892Z,1492143007.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:08.124Z,1492143008.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:08.283Z,1492143008.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:08.663Z,1492143008.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:08.922Z,1492143008.922 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:09.089Z,1492143009.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:09.500Z,1492143009.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:09.720Z,1492143009.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:09.865Z,1492143009.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:10.124Z,1492143010.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:10.286Z,1492143010.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:10.761Z,1492143010.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:10.924Z,1492143010.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:11.087Z,1492143011.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:11.539Z,1492143011.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:11.720Z,1492143011.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:11.950Z,1492143011.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:12.124Z,1492143012.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:12.272Z,1492143012.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:12.668Z,1492143012.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:12.920Z,1492143012.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:13.139Z,1492143013.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:13.478Z,1492143013.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:13.696Z,1492143013.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:13.919Z,1492143013.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:14.317Z,1492143014.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:14.492Z,1492143014.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:14.740Z,1492143014.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:15.068Z,1492143015.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:15.288Z,1492143015.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:15.470Z,1492143015.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:15.708Z,1492143015.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:15.878Z,1492143015.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:16.281Z,1492143016.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:16.504Z,1492143016.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:16.684Z,1492143016.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:17.079Z,1492143017.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:17.302Z,1492143017.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:17.482Z,1492143017.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:17.708Z,1492143017.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:17.893Z,1492143017.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:18.283Z,1492143018.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:18.505Z,1492143018.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:18.684Z,1492143018.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:19.086Z,1492143019.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:19.300Z,1492143019.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:19.494Z,1492143019.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:19.704Z,1492143019.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:19.895Z,1492143019.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:20.271Z,1492143020.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:20.500Z,1492143020.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:20.664Z,1492143020.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:21.062Z,1492143021.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:21.299Z,1492143021.299 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:21.477Z,1492143021.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:21.744Z,1492143021.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:21.874Z,1492143021.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:22.269Z,1492143022.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:22.540Z,1492143022.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:22.672Z,1492143022.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:23.078Z,1492143023.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:23.336Z,1492143023.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:23.470Z,1492143023.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:23.908Z,1492143023.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:24.036Z,1492143024.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:24.289Z,1492143024.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:24.668Z,1492143024.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:24.832Z,1492143024.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:25.098Z,1492143025.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:25.512Z,1492143025.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:25.629Z,1492143025.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:25.898Z,1492143025.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:26.090Z,1492143026.091 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:26.357Z,1492143026.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:26.681Z,1492143026.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:26.885Z,1492143026.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:27.113Z,1492143027.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:27.489Z,1492143027.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:27.688Z,1492143027.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:27.963Z,1492143027.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:28.093Z,1492143028.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:28.294Z,1492143028.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:28.693Z,1492143028.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:28.888Z,1492143028.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:29.075Z,1492143029.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:29.465Z,1492143029.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:29.673Z,1492143029.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:29.869Z,1492143029.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:30.298Z,1492143030.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:30.468Z,1492143030.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:30.662Z,1492143030.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:31.075Z,1492143031.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:31.264Z,1492143031.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:31.548Z,1492143031.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:31.732Z,1492143031.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:31.905Z,1492143031.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:32.272Z,1492143032.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:32.284Z,1492143032.284 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:32.284Z,1492143032.284 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:10:32.284Z,1492143032.284 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:10:32.349Z,1492143032.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:10:32.529Z,1492143032.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:32.656Z,1492143032.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:32.706Z,1492143032.706 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:10:32.706Z,1492143032.706 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:10:33.085Z,1492143033.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:33.091Z,1492143033.091 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:10:33.092Z,1492143033.092 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:10:33.092Z,1492143033.092 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:10:33.324Z,1492143033.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:33.488Z,1492143033.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:33.728Z,1492143033.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:33.859Z,1492143033.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:34.288Z,1492143034.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:34.527Z,1492143034.527 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:34.688Z,1492143034.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:35.068Z,1492143035.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:35.324Z,1492143035.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:35.478Z,1492143035.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:35.728Z,1492143035.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:36.524Z,1492143036.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:37.320Z,1492143037.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:38.028Z,1492143038.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:38.824Z,1492143038.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:38.918Z,1492143038.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:39.062Z,1492143039.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:39.438Z,1492143039.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:39.620Z,1492143039.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:39.831Z,1492143039.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:40.024Z,1492143040.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:40.266Z,1492143040.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:40.674Z,1492143040.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:40.820Z,1492143040.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:41.036Z,1492143041.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:41.473Z,1492143041.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:41.616Z,1492143041.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:41.839Z,1492143041.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:42.020Z,1492143042.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:42.246Z,1492143042.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:42.666Z,1492143042.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:42.816Z,1492143042.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:43.022Z,1492143043.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:43.452Z,1492143043.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:43.612Z,1492143043.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:43.860Z,1492143043.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:44.016Z,1492143044.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:44.225Z,1492143044.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:44.634Z,1492143044.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:44.812Z,1492143044.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:45.025Z,1492143045.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:45.471Z,1492143045.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:45.608Z,1492143045.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:45.836Z,1492143045.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:46.012Z,1492143046.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:46.225Z,1492143046.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:46.624Z,1492143046.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:46.808Z,1492143046.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:47.035Z,1492143047.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:47.426Z,1492143047.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:47.604Z,1492143047.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:47.833Z,1492143047.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:48.008Z,1492143048.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:48.238Z,1492143048.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:48.632Z,1492143048.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:48.804Z,1492143048.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:49.029Z,1492143049.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:49.430Z,1492143049.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:49.600Z,1492143049.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:49.836Z,1492143049.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:50.004Z,1492143050.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:50.234Z,1492143050.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:50.638Z,1492143050.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:50.800Z,1492143050.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:51.030Z,1492143051.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:51.434Z,1492143051.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:51.596Z,1492143051.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:51.856Z,1492143051.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:52.028Z,1492143052.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:52.245Z,1492143052.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:52.618Z,1492143052.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:52.824Z,1492143052.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:53.028Z,1492143053.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:53.422Z,1492143053.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:53.620Z,1492143053.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:53.835Z,1492143053.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:54.057Z,1492143054.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:54.238Z,1492143054.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:54.693Z,1492143054.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:54.852Z,1492143054.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:55.044Z,1492143055.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:55.454Z,1492143055.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:55.645Z,1492143055.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:55.832Z,1492143055.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:56.242Z,1492143056.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:56.440Z,1492143056.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:56.634Z,1492143056.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:57.050Z,1492143057.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:57.238Z,1492143057.238 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:57.432Z,1492143057.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:57.648Z,1492143057.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:57.838Z,1492143057.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:58.245Z,1492143058.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:58.445Z,1492143058.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:58.638Z,1492143058.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:59.037Z,1492143059.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:59.240Z,1492143059.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:59.442Z,1492143059.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:10:59.644Z,1492143059.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:10:59.843Z,1492143059.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:00.248Z,1492143060.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:00.440Z,1492143060.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:00.623Z,1492143060.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:01.073Z,1492143061.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:01.236Z,1492143061.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:01.480Z,1492143061.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:01.729Z,1492143061.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:01.852Z,1492143061.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:02.221Z,1492143062.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:02.524Z,1492143062.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:02.633Z,1492143062.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:03.025Z,1492143063.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:03.320Z,1492143063.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:03.426Z,1492143063.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:03.724Z,1492143063.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:03.829Z,1492143063.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:04.237Z,1492143064.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:04.520Z,1492143064.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:04.629Z,1492143064.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:05.027Z,1492143065.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:05.316Z,1492143065.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:05.438Z,1492143065.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:05.822Z,1492143065.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:06.012Z,1492143066.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:06.249Z,1492143066.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:06.626Z,1492143066.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:06.808Z,1492143066.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:07.026Z,1492143067.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:07.430Z,1492143067.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:07.606Z,1492143067.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:07.817Z,1492143067.817 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:11:07.817Z,1492143067.817 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:11:07.817Z,1492143067.817 [BPC1](ERROR): Data Fault
2017-04-14T04:11:07.850Z,1492143067.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:07.890Z,1492143067.890 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:11:08.012Z,1492143068.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:08.230Z,1492143068.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:08.633Z,1492143068.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:08.810Z,1492143068.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:09.030Z,1492143069.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:09.049Z,1492143069.049 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:11:09.049Z,1492143069.049 [BPC1] No Fault, FailCount= 1
2017-04-14T04:11:09.474Z,1492143069.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:09.604Z,1492143069.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:09.842Z,1492143069.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:10.008Z,1492143070.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:10.246Z,1492143070.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:10.630Z,1492143070.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:10.804Z,1492143070.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:11.042Z,1492143071.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:11.433Z,1492143071.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:11.600Z,1492143071.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:11.836Z,1492143071.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:12.004Z,1492143072.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:12.231Z,1492143072.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:12.624Z,1492143072.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:12.800Z,1492143072.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:13.036Z,1492143073.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:13.443Z,1492143073.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:13.596Z,1492143073.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:13.838Z,1492143073.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:13.000Z,1492143074.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:14.216Z,1492143074.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:14.621Z,1492143074.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:14.621Z,1492143074.621 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:11:14.621Z,1492143074.621 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:11:14.670Z,1492143074.670 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:11:14.796Z,1492143074.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:15.029Z,1492143075.029 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:15.029Z,1492143075.029 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:11:15.029Z,1492143075.029 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:11:15.068Z,1492143075.068 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:11:15.068Z,1492143075.068 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:11:15.069Z,1492143075.069 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:11:15.453Z,1492143075.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:11:15.453Z,1492143075.453 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:11:15.454Z,1492143075.454 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:11:15.472Z,1492143075.472 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:11:15.472Z,1492143075.472 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:11:15.592Z,1492143075.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:15.854Z,1492143075.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:15.867Z,1492143075.867 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:11:15.868Z,1492143075.868 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:11:15.868Z,1492143075.868 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:11:15.996Z,1492143075.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:16.227Z,1492143076.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:16.635Z,1492143076.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:16.792Z,1492143076.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:17.038Z,1492143077.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:17.469Z,1492143077.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:17.588Z,1492143077.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:17.902Z,1492143077.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:18.014Z,1492143078.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:18.262Z,1492143078.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:18.649Z,1492143078.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:18.808Z,1492143078.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:19.034Z,1492143079.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:19.528Z,1492143079.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:19.606Z,1492143079.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:19.852Z,1492143079.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:20.012Z,1492143080.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:20.241Z,1492143080.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:20.635Z,1492143080.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:20.809Z,1492143080.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:21.034Z,1492143081.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:21.445Z,1492143081.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:21.608Z,1492143081.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:21.878Z,1492143081.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:22.012Z,1492143082.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:22.421Z,1492143082.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:22.635Z,1492143082.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:22.810Z,1492143082.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:23.074Z,1492143083.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:23.437Z,1492143083.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:23.616Z,1492143083.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:23.905Z,1492143083.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:24.024Z,1492143084.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:11:24.280Z,1492143084.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:24.658Z,1492143084.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:25.039Z,1492143085.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:25.442Z,1492143085.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:25.858Z,1492143085.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:26.285Z,1492143086.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:26.716Z,1492143086.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:27.046Z,1492143087.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:27.426Z,1492143087.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:27.838Z,1492143087.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:28.236Z,1492143088.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:28.644Z,1492143088.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:29.062Z,1492143089.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:29.452Z,1492143089.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:29.828Z,1492143089.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:30.217Z,1492143090.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:30.631Z,1492143090.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:31.030Z,1492143091.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:31.430Z,1492143091.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:31.835Z,1492143091.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:32.257Z,1492143092.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:32.674Z,1492143092.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:33.051Z,1492143093.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:33.494Z,1492143093.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:33.841Z,1492143093.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:34.343Z,1492143094.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:34.756Z,1492143094.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:35.256Z,1492143095.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:35.619Z,1492143095.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:41.128Z,1492143101.128 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:11:41.128Z,1492143101.128 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:11:41.128Z,1492143101.128 [BPC1](ERROR): Communications Fault
2017-04-14T04:11:41.170Z,1492143101.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:41.244Z,1492143101.244 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:11:41.368Z,1492143101.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:41.725Z,1492143101.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:42.120Z,1492143102.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:42.170Z,1492143102.170 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:11:42.170Z,1492143102.170 [BPC1] No Fault, FailCount= 1
2017-04-14T04:11:42.562Z,1492143102.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:42.966Z,1492143102.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:43.349Z,1492143103.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:43.709Z,1492143103.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:44.112Z,1492143104.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:44.549Z,1492143104.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:44.928Z,1492143104.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:45.310Z,1492143105.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:45.722Z,1492143105.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:46.115Z,1492143106.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:46.518Z,1492143106.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:46.922Z,1492143106.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:47.312Z,1492143107.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:47.728Z,1492143107.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:48.128Z,1492143108.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:48.514Z,1492143108.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:48.937Z,1492143108.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:49.338Z,1492143109.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:49.702Z,1492143109.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:50.138Z,1492143110.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:50.508Z,1492143110.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:50.902Z,1492143110.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:51.306Z,1492143111.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:51.742Z,1492143111.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:52.110Z,1492143112.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:52.514Z,1492143112.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:52.948Z,1492143112.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:53.321Z,1492143113.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:53.735Z,1492143113.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:54.128Z,1492143114.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:54.523Z,1492143114.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:54.924Z,1492143114.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:55.375Z,1492143115.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:55.710Z,1492143115.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:56.138Z,1492143116.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:56.515Z,1492143116.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:56.934Z,1492143116.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:57.334Z,1492143117.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:57.706Z,1492143117.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:58.104Z,1492143118.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:58.508Z,1492143118.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:58.908Z,1492143118.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:59.305Z,1492143119.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:11:59.713Z,1492143119.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:00.104Z,1492143120.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:00.502Z,1492143120.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:00.913Z,1492143120.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:01.308Z,1492143121.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:01.710Z,1492143121.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:02.113Z,1492143122.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:02.509Z,1492143122.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:02.910Z,1492143122.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:03.314Z,1492143123.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:03.722Z,1492143123.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:04.106Z,1492143124.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:04.514Z,1492143124.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:04.912Z,1492143124.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:05.306Z,1492143125.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:05.714Z,1492143125.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:06.119Z,1492143126.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:06.509Z,1492143126.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:06.923Z,1492143126.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:07.302Z,1492143127.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:07.696Z,1492143127.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:08.134Z,1492143128.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:08.532Z,1492143128.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:08.906Z,1492143128.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:09.310Z,1492143129.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:09.739Z,1492143129.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:10.104Z,1492143130.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:10.504Z,1492143130.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:10.904Z,1492143130.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:11.310Z,1492143131.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:11.713Z,1492143131.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:12.105Z,1492143132.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:12.501Z,1492143132.501 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:12:12.501Z,1492143132.501 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:12:12.501Z,1492143132.501 [BPC1](ERROR): Communications Fault
2017-04-14T04:12:12.510Z,1492143132.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:12.530Z,1492143132.530 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:12:12.913Z,1492143132.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:13.307Z,1492143133.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:13.714Z,1492143133.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:13.754Z,1492143133.754 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:12:13.754Z,1492143133.754 [BPC1] No Fault, FailCount= 1
2017-04-14T04:12:14.166Z,1492143134.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:14.186Z,1492143134.187 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:12:14.549Z,1492143134.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:14.909Z,1492143134.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:15.322Z,1492143135.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:15.716Z,1492143135.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:16.108Z,1492143136.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:16.520Z,1492143136.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:16.921Z,1492143136.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:17.316Z,1492143137.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:17.732Z,1492143137.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:18.133Z,1492143138.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:18.505Z,1492143138.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:18.904Z,1492143138.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:19.314Z,1492143139.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:19.762Z,1492143139.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:20.111Z,1492143140.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:20.544Z,1492143140.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:20.949Z,1492143140.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:21.308Z,1492143141.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:21.743Z,1492143141.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:22.173Z,1492143142.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:22.509Z,1492143142.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:22.978Z,1492143142.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:23.314Z,1492143143.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:23.756Z,1492143143.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:24.121Z,1492143144.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:24.512Z,1492143144.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:24.916Z,1492143144.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:25.316Z,1492143145.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:25.713Z,1492143145.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:26.096Z,1492143146.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:26.510Z,1492143146.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:26.924Z,1492143146.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:27.349Z,1492143147.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:27.707Z,1492143147.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:28.119Z,1492143148.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:28.516Z,1492143148.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:28.914Z,1492143148.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:29.331Z,1492143149.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:29.726Z,1492143149.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:30.112Z,1492143150.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:30.514Z,1492143150.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:30.908Z,1492143150.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:31.309Z,1492143151.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:31.720Z,1492143151.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:32.121Z,1492143152.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:32.508Z,1492143152.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:32.938Z,1492143152.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:33.369Z,1492143153.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:33.734Z,1492143153.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:34.149Z,1492143154.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:34.505Z,1492143154.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:34.908Z,1492143154.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:35.394Z,1492143155.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:35.722Z,1492143155.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:39.669Z,1492143159.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:39.813Z,1492143159.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:40.179Z,1492143160.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:40.568Z,1492143160.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:40.964Z,1492143160.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:41.349Z,1492143161.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:41.749Z,1492143161.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:42.146Z,1492143162.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:42.545Z,1492143162.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:42.946Z,1492143162.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:43.433Z,1492143163.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:43.757Z,1492143163.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:44.146Z,1492143164.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:44.558Z,1492143164.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:44.954Z,1492143164.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:45.447Z,1492143165.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:45.755Z,1492143165.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:46.157Z,1492143166.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:46.553Z,1492143166.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:46.954Z,1492143166.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:47.371Z,1492143167.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:47.753Z,1492143167.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:48.162Z,1492143168.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:48.566Z,1492143168.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:48.941Z,1492143168.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:49.377Z,1492143169.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:49.804Z,1492143169.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:50.164Z,1492143170.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:50.576Z,1492143170.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:51.054Z,1492143171.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:51.389Z,1492143171.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:51.770Z,1492143171.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:52.182Z,1492143172.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:52.557Z,1492143172.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:52.957Z,1492143172.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:53.382Z,1492143173.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:53.766Z,1492143173.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:54.197Z,1492143174.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:54.573Z,1492143174.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:54.956Z,1492143174.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:55.358Z,1492143175.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:55.766Z,1492143175.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:56.161Z,1492143176.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:56.566Z,1492143176.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:56.971Z,1492143176.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:57.453Z,1492143177.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:57.785Z,1492143177.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:58.155Z,1492143178.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:58.558Z,1492143178.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:58.000Z,1492143179.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:59.421Z,1492143179.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:12:59.790Z,1492143179.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:00.150Z,1492143180.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:00.548Z,1492143180.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:00.945Z,1492143180.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:01.364Z,1492143181.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:01.748Z,1492143181.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:02.151Z,1492143182.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:02.551Z,1492143182.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:02.949Z,1492143182.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:03.350Z,1492143183.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:03.764Z,1492143183.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:04.164Z,1492143184.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:04.568Z,1492143184.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:05.012Z,1492143185.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:05.378Z,1492143185.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:05.749Z,1492143185.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:06.191Z,1492143186.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:06.548Z,1492143186.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:07.023Z,1492143187.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:07.357Z,1492143187.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:07.774Z,1492143187.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:08.157Z,1492143188.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:08.553Z,1492143188.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:08.962Z,1492143188.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:09.350Z,1492143189.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:09.748Z,1492143189.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:10.154Z,1492143190.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:10.552Z,1492143190.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:10.952Z,1492143190.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:11.411Z,1492143191.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:11.752Z,1492143191.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:12.156Z,1492143192.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:12.557Z,1492143192.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:12.967Z,1492143192.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:13.420Z,1492143193.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:13.760Z,1492143193.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:14.168Z,1492143194.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:14.556Z,1492143194.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:15.002Z,1492143195.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:15.358Z,1492143195.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:15.751Z,1492143195.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:16.164Z,1492143196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:16.577Z,1492143196.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:17.082Z,1492143197.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:17.356Z,1492143197.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:17.758Z,1492143197.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:18.162Z,1492143198.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:18.651Z,1492143198.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:19.088Z,1492143199.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:19.389Z,1492143199.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:19.754Z,1492143199.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:20.175Z,1492143200.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:20.594Z,1492143200.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:21.049Z,1492143201.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:21.348Z,1492143201.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:21.746Z,1492143201.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:22.154Z,1492143202.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:22.541Z,1492143202.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:22.948Z,1492143202.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:23.358Z,1492143203.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:23.759Z,1492143203.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:24.150Z,1492143204.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:24.558Z,1492143204.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:24.950Z,1492143204.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:25.393Z,1492143205.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:25.759Z,1492143205.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:26.167Z,1492143206.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:26.561Z,1492143206.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:26.965Z,1492143206.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:27.430Z,1492143207.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:27.754Z,1492143207.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:28.154Z,1492143208.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:28.553Z,1492143208.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:29.136Z,1492143209.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:29.455Z,1492143209.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:29.786Z,1492143209.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:30.163Z,1492143210.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:30.794Z,1492143210.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:31.014Z,1492143211.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:31.359Z,1492143211.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:31.748Z,1492143211.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:32.174Z,1492143212.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:32.561Z,1492143212.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:33.058Z,1492143213.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:33.390Z,1492143213.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:33.398Z,1492143213.398 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:33.398Z,1492143213.398 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:13:33.398Z,1492143213.398 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:13:33.437Z,1492143213.437 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:13:33.749Z,1492143213.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:33.795Z,1492143213.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:13:33.795Z,1492143213.795 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:13:34.153Z,1492143214.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:34.158Z,1492143214.158 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:13:34.159Z,1492143214.159 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:13:34.160Z,1492143214.159 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:13:34.590Z,1492143214.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:35.047Z,1492143215.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:35.366Z,1492143215.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:35.374Z,1492143215.374 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:13:35.375Z,1492143215.375 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:13:35.375Z,1492143215.375 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:13:35.375Z,1492143215.375 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:13:35.761Z,1492143215.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:35.779Z,1492143215.779 [Default:CheckIn:D] Stopped
2017-04-14T04:13:35.779Z,1492143215.779 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:13:40.380Z,1492143220.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:40.398Z,1492143220.398 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 47.507666 min 
2017-04-14T04:13:40.398Z,1492143220.398 [Default:CheckIn:E] Stopped
2017-04-14T04:13:40.399Z,1492143220.399 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:13:40.399Z,1492143220.399 [Default:CheckIn] Stopped
2017-04-14T04:13:40.403Z,1492143220.403 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:13:40.403Z,1492143220.404 [Default:CheckIn](INFO): Running loop #8
2017-04-14T04:13:40.403Z,1492143220.404 [Default:CheckIn] Running Loop=8
2017-04-14T04:13:40.404Z,1492143220.404 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:13:40.404Z,1492143220.404 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:13:40.579Z,1492143220.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:40.872Z,1492143220.872 [NAL9602](INFO): Powering up
2017-04-14T04:13:40.934Z,1492143220.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:41.442Z,1492143221.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:41.719Z,1492143221.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:42.122Z,1492143222.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:42.522Z,1492143222.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:42.995Z,1492143222.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:43.316Z,1492143223.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:43.751Z,1492143223.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:44.146Z,1492143224.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:44.524Z,1492143224.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:45.014Z,1492143225.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:45.315Z,1492143225.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:45.748Z,1492143225.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:46.161Z,1492143226.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:46.526Z,1492143226.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:47.013Z,1492143227.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:47.313Z,1492143227.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:47.753Z,1492143227.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:48.131Z,1492143228.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:48.519Z,1492143228.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:49.012Z,1492143229.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:49.340Z,1492143229.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:49.718Z,1492143229.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:50.118Z,1492143230.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:50.538Z,1492143230.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:50.973Z,1492143230.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:51.403Z,1492143231.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:51.690Z,1492143231.690 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:13:51.809Z,1492143231.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:52.170Z,1492143232.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:52.664Z,1492143232.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:53.041Z,1492143233.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:53.416Z,1492143233.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:53.822Z,1492143233.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:54.240Z,1492143234.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:54.660Z,1492143234.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:54.982Z,1492143234.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:55.406Z,1492143235.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:55.747Z,1492143235.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:56.131Z,1492143236.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:56.573Z,1492143236.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:57.026Z,1492143237.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:57.360Z,1492143237.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:57.781Z,1492143237.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:58.125Z,1492143238.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:58.570Z,1492143238.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:59.036Z,1492143239.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:59.325Z,1492143239.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:13:59.732Z,1492143239.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:00.129Z,1492143240.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:00.536Z,1492143240.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:01.000Z,1492143241.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:01.341Z,1492143241.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:01.722Z,1492143241.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:02.126Z,1492143242.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:02.558Z,1492143242.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:03.022Z,1492143243.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:03.334Z,1492143243.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:03.729Z,1492143243.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:04.211Z,1492143244.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:04.540Z,1492143244.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:05.001Z,1492143245.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:05.327Z,1492143245.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:05.739Z,1492143245.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:06.130Z,1492143246.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:06.556Z,1492143246.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:07.000Z,1492143247.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:07.380Z,1492143247.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:07.788Z,1492143247.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:08.117Z,1492143248.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:08.540Z,1492143248.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:08.965Z,1492143248.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:09.562Z,1492143249.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:09.821Z,1492143249.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:10.169Z,1492143250.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:10.610Z,1492143250.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:11.118Z,1492143251.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:11.382Z,1492143251.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:11.775Z,1492143251.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:12.145Z,1492143252.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:12.533Z,1492143252.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:12.981Z,1492143252.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:13.360Z,1492143253.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:13.780Z,1492143253.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:14.150Z,1492143254.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:14.573Z,1492143254.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:15.167Z,1492143255.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:15.375Z,1492143255.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:15.782Z,1492143255.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:15.782Z,1492143255.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:14:15.782Z,1492143255.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:14:15.803Z,1492143255.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:14:16.153Z,1492143256.152 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:16.153Z,1492143256.153 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:14:16.153Z,1492143256.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:14:16.168Z,1492143256.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:14:16.168Z,1492143256.168 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:14:16.169Z,1492143256.169 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:14:16.549Z,1492143256.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:14:16.550Z,1492143256.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:14:16.550Z,1492143256.550 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:14:16.599Z,1492143256.599 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:14:16.600Z,1492143256.599 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:14:16.993Z,1492143256.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:17.031Z,1492143257.031 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:14:17.032Z,1492143257.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:14:17.032Z,1492143257.032 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:14:17.345Z,1492143257.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:17.744Z,1492143257.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:18.141Z,1492143258.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:18.550Z,1492143258.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:18.998Z,1492143258.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:19.361Z,1492143259.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:19.778Z,1492143259.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:20.173Z,1492143260.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:20.593Z,1492143260.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:21.042Z,1492143261.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:21.375Z,1492143261.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:21.765Z,1492143261.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:22.186Z,1492143262.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:22.594Z,1492143262.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:22.942Z,1492143262.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:23.368Z,1492143263.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:23.790Z,1492143263.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:24.151Z,1492143264.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:24.610Z,1492143264.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:25.002Z,1492143265.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:25.402Z,1492143265.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:25.759Z,1492143265.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:26.184Z,1492143266.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:26.549Z,1492143266.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:26.965Z,1492143266.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:27.365Z,1492143267.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:27.749Z,1492143267.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:28.157Z,1492143268.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:28.563Z,1492143268.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:28.981Z,1492143268.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:29.340Z,1492143269.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:29.747Z,1492143269.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:30.161Z,1492143270.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:30.544Z,1492143270.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:30.980Z,1492143270.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:31.343Z,1492143271.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:31.750Z,1492143271.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:32.146Z,1492143272.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:32.560Z,1492143272.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:33.021Z,1492143273.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:33.361Z,1492143273.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:33.751Z,1492143273.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:34.155Z,1492143274.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:34.535Z,1492143274.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:34.953Z,1492143274.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:35.376Z,1492143275.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:35.741Z,1492143275.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:36.193Z,1492143276.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:39.987Z,1492143279.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:40.143Z,1492143280.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:40.530Z,1492143280.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:41.006Z,1492143281.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:41.342Z,1492143281.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:41.756Z,1492143281.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:42.184Z,1492143282.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:42.538Z,1492143282.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:43.017Z,1492143283.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:43.330Z,1492143283.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:43.773Z,1492143283.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:44.135Z,1492143284.135 [PNI_TCM](ERROR): CRC does not match. Expected:0x32115 got:0x6593
2017-04-14T04:14:44.186Z,1492143284.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:44.536Z,1492143284.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:44.961Z,1492143284.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:45.348Z,1492143285.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:45.719Z,1492143285.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:46.126Z,1492143286.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:46.520Z,1492143286.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:46.985Z,1492143286.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:47.312Z,1492143287.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:47.770Z,1492143287.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:48.085Z,1492143288.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:48.520Z,1492143288.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:48.919Z,1492143288.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:49.328Z,1492143289.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:49.724Z,1492143289.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:50.117Z,1492143290.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:50.526Z,1492143290.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:50.932Z,1492143290.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:51.321Z,1492143291.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:51.720Z,1492143291.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:52.116Z,1492143292.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:52.520Z,1492143292.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:52.969Z,1492143292.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:53.319Z,1492143293.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:53.759Z,1492143293.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:54.132Z,1492143294.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:54.518Z,1492143294.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:54.946Z,1492143294.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:55.350Z,1492143295.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:55.717Z,1492143295.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:56.154Z,1492143296.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:56.512Z,1492143296.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:56.917Z,1492143296.917 [PNI_TCM](ERROR): CRC does not match. Expected:0x53085 got:0x115
2017-04-14T04:14:56.962Z,1492143296.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:57.376Z,1492143297.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:57.733Z,1492143297.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:58.133Z,1492143298.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:58.536Z,1492143298.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:58.953Z,1492143298.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:59.311Z,1492143299.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:14:59.712Z,1492143299.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:00.114Z,1492143300.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:00.546Z,1492143300.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:00.960Z,1492143300.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:01.330Z,1492143301.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:01.728Z,1492143301.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:02.123Z,1492143302.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:02.544Z,1492143302.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:02.915Z,1492143302.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:03.314Z,1492143303.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:03.715Z,1492143303.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:04.140Z,1492143304.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:04.514Z,1492143304.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:04.904Z,1492143304.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:05.326Z,1492143305.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:05.715Z,1492143305.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:06.109Z,1492143306.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:06.530Z,1492143306.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:06.914Z,1492143306.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:07.334Z,1492143307.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:07.712Z,1492143307.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:08.130Z,1492143308.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:08.519Z,1492143308.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:08.934Z,1492143308.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:09.337Z,1492143309.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:09.699Z,1492143309.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:10.139Z,1492143310.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:10.518Z,1492143310.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:10.905Z,1492143310.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:11.303Z,1492143311.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:11.730Z,1492143311.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:12.111Z,1492143312.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:12.510Z,1492143312.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:12.911Z,1492143312.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:13.324Z,1492143313.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:13.740Z,1492143313.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:14.115Z,1492143314.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:14.520Z,1492143314.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:14.959Z,1492143314.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:15.375Z,1492143315.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:15.702Z,1492143315.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:16.105Z,1492143316.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:16.535Z,1492143316.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:16.921Z,1492143316.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:17.334Z,1492143317.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:17.801Z,1492143317.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:18.195Z,1492143318.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:18.552Z,1492143318.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:18.960Z,1492143318.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:19.344Z,1492143319.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:19.784Z,1492143319.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:20.152Z,1492143320.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:20.649Z,1492143320.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:20.924Z,1492143320.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:21.330Z,1492143321.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:21.725Z,1492143321.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:22.154Z,1492143322.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:22.490Z,1492143322.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:22.930Z,1492143322.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:23.319Z,1492143323.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:23.734Z,1492143323.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:24.091Z,1492143324.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:24.498Z,1492143324.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:24.899Z,1492143324.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:25.309Z,1492143325.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:25.736Z,1492143325.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:26.111Z,1492143326.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:26.538Z,1492143326.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:26.923Z,1492143326.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:27.282Z,1492143327.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:27.713Z,1492143327.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:28.116Z,1492143328.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:28.496Z,1492143328.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:28.929Z,1492143328.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:29.346Z,1492143329.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:29.726Z,1492143329.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:30.166Z,1492143330.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:30.497Z,1492143330.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:30.940Z,1492143330.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:31.360Z,1492143331.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:31.736Z,1492143331.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:32.114Z,1492143332.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:32.562Z,1492143332.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:32.912Z,1492143332.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:33.296Z,1492143333.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:33.698Z,1492143333.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:34.096Z,1492143334.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:34.498Z,1492143334.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:34.940Z,1492143334.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:35.374Z,1492143335.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:35.721Z,1492143335.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:36.085Z,1492143336.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:36.561Z,1492143336.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:43.989Z,1492143343.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:44.194Z,1492143344.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:44.574Z,1492143344.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:44.942Z,1492143344.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:45.338Z,1492143345.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:45.787Z,1492143345.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:46.170Z,1492143346.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:46.562Z,1492143346.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:46.956Z,1492143346.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:47.408Z,1492143347.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:47.744Z,1492143347.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:48.145Z,1492143348.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:48.532Z,1492143348.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:48.930Z,1492143348.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:49.331Z,1492143349.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:49.748Z,1492143349.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:50.142Z,1492143350.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:50.550Z,1492143350.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:50.952Z,1492143350.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:51.362Z,1492143351.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:51.758Z,1492143351.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:52.170Z,1492143352.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:52.562Z,1492143352.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:52.950Z,1492143352.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:53.330Z,1492143353.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:53.731Z,1492143353.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:54.134Z,1492143354.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:54.530Z,1492143354.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:54.932Z,1492143354.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:55.337Z,1492143355.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:55.745Z,1492143355.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:56.158Z,1492143356.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:56.586Z,1492143356.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:56.990Z,1492143356.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:57.369Z,1492143357.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:57.766Z,1492143357.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:58.135Z,1492143358.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:58.570Z,1492143358.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:58.978Z,1492143358.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:59.336Z,1492143359.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:15:59.829Z,1492143359.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:00.155Z,1492143360.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:00.594Z,1492143360.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:00.965Z,1492143360.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:01.357Z,1492143361.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:01.730Z,1492143361.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:02.126Z,1492143362.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:02.546Z,1492143362.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:02.933Z,1492143362.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:03.334Z,1492143363.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:03.740Z,1492143363.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:04.131Z,1492143364.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:04.542Z,1492143364.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:04.948Z,1492143364.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:05.343Z,1492143365.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:05.740Z,1492143365.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:06.142Z,1492143366.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:06.541Z,1492143366.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:06.941Z,1492143366.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:07.350Z,1492143367.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:07.747Z,1492143367.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:08.140Z,1492143368.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:08.562Z,1492143368.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:08.956Z,1492143368.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:09.345Z,1492143369.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:09.759Z,1492143369.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:10.134Z,1492143370.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:10.593Z,1492143370.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:10.968Z,1492143370.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:11.340Z,1492143371.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:11.769Z,1492143371.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:12.137Z,1492143372.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:12.559Z,1492143372.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:12.982Z,1492143372.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:13.360Z,1492143373.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:13.770Z,1492143373.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:14.168Z,1492143374.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:14.534Z,1492143374.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:14.996Z,1492143374.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:15.347Z,1492143375.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:15.852Z,1492143375.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:16.271Z,1492143376.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:16.585Z,1492143376.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:17.000Z,1492143377.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:17.370Z,1492143377.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:17.814Z,1492143377.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:18.174Z,1492143378.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:18.548Z,1492143378.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:19.006Z,1492143379.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:19.371Z,1492143379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:19.759Z,1492143379.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:20.164Z,1492143380.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:20.565Z,1492143380.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:20.961Z,1492143380.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:21.373Z,1492143381.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:21.775Z,1492143381.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:22.172Z,1492143382.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:22.560Z,1492143382.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:22.962Z,1492143382.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:23.370Z,1492143383.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:23.776Z,1492143383.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:24.164Z,1492143384.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:24.574Z,1492143384.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:24.960Z,1492143384.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:25.430Z,1492143385.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:25.783Z,1492143385.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:26.209Z,1492143386.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:26.567Z,1492143386.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:27.060Z,1492143387.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:27.393Z,1492143387.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:27.773Z,1492143387.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:28.183Z,1492143388.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:28.558Z,1492143388.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:28.957Z,1492143388.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:29.383Z,1492143389.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:29.795Z,1492143389.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:30.183Z,1492143390.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:30.561Z,1492143390.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:30.967Z,1492143390.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:31.369Z,1492143391.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:31.770Z,1492143391.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:32.150Z,1492143392.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:32.553Z,1492143392.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:32.000Z,1492143393.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:33.376Z,1492143393.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:33.779Z,1492143393.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:34.176Z,1492143394.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:34.185Z,1492143394.185 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:34.185Z,1492143394.185 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T04:16:34.185Z,1492143394.185 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:16:34.201Z,1492143394.201 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:16:34.582Z,1492143394.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:34.609Z,1492143394.609 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:16:34.609Z,1492143394.609 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T04:16:34.982Z,1492143394.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:34.995Z,1492143394.995 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:16:34.997Z,1492143394.997 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:16:34.997Z,1492143394.997 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:16:35.370Z,1492143395.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:35.769Z,1492143395.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:36.173Z,1492143396.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:36.572Z,1492143396.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:40.584Z,1492143400.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:40.723Z,1492143400.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:41.117Z,1492143401.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:41.499Z,1492143401.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:41.950Z,1492143401.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:42.334Z,1492143402.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:42.693Z,1492143402.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:43.119Z,1492143403.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:43.516Z,1492143403.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:43.901Z,1492143403.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:44.254Z,1492143404.254 [NAL9602](INFO): SBD MO Status=0, MOMSN=2101, MT Status=0, MTMSN=0
2017-04-14T04:16:44.254Z,1492143404.254 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:16:44.306Z,1492143404.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:44.759Z,1492143404.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:45.122Z,1492143405.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:45.450Z,1492143405.450 [NAL9602](INFO): GPS fix at 20170414T041649: (36.802351, -121.787117)
2017-04-14T04:16:45.536Z,1492143405.536 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:16:45.536Z,1492143405.536 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:16:45.916Z,1492143405.916 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:45.916Z,1492143405.916 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:16:45.916Z,1492143405.916 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:16:45.927Z,1492143405.927 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:45.927Z,1492143405.927 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:16:45.927Z,1492143405.927 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:16:45.971Z,1492143405.971 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:16:45.975Z,1492143405.975 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:16:46.350Z,1492143406.351 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:16:46.351Z,1492143406.351 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:16:46.356Z,1492143406.356 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:16:46.356Z,1492143406.356 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:16:46.786Z,1492143406.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:16:46.786Z,1492143406.786 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:16:46.787Z,1492143406.787 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:16:46.799Z,1492143406.799 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:16:46.800Z,1492143406.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:16:46.800Z,1492143406.800 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:16:50.410Z,1492143410.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:50.484Z,1492143410.484 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0036.lzma
2017-04-14T04:16:50.554Z,1492143410.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:50.898Z,1492143410.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:51.245Z,1492143411.245 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0036.lzma.bak
2017-04-14T04:16:51.246Z,1492143411.246 [DataOverHttps](INFO): SBD MOMSN=4885135
2017-04-14T04:16:51.344Z,1492143411.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:51.752Z,1492143411.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:52.116Z,1492143412.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:55.874Z,1492143415.874 [NAL9602](INFO): Powering down
2017-04-14T04:16:55.991Z,1492143415.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:56.146Z,1492143416.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:56.484Z,1492143416.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:56.929Z,1492143416.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:57.290Z,1492143417.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:16:57.723Z,1492143417.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:01.327Z,1492143421.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:01.416Z,1492143421.416 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0037.lzma
2017-04-14T04:17:01.482Z,1492143421.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:01.838Z,1492143421.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:02.189Z,1492143422.189 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0037.lzma.bak
2017-04-14T04:17:02.190Z,1492143422.190 [DataOverHttps](INFO): SBD MOMSN=4885138
2017-04-14T04:17:02.264Z,1492143422.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:02.744Z,1492143422.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:02.753Z,1492143422.753 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:17:02.753Z,1492143422.753 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:17:02.753Z,1492143422.753 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:17:03.102Z,1492143423.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:07.115Z,1492143427.115 [PNI_TCM](ERROR): CRC does not match. Expected:0x47053 got:0x10872
2017-04-14T04:17:07.115Z,1492143427.115 [PNI_TCM](ERROR): CRC does not match. Expected:0x940 got:0x10912
2017-04-14T04:17:07.116Z,1492143427.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x60326 got:0x10935
2017-04-14T04:17:07.116Z,1492143427.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x45767 got:0x10915
2017-04-14T04:17:07.116Z,1492143427.116 [PNI_TCM](ERROR): CRC does not match. Expected:0x38571 got:0x10913
2017-04-14T04:17:07.117Z,1492143427.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x48031 got:0x10935
2017-04-14T04:17:07.117Z,1492143427.117 [PNI_TCM](ERROR): CRC does not match. Expected:0x4000 got:0x10935
2017-04-14T04:17:07.118Z,1492143427.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x46277 got:0x10922
2017-04-14T04:17:07.118Z,1492143427.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x12278 got:0x10925
2017-04-14T04:17:07.118Z,1492143427.118 [PNI_TCM](ERROR): CRC does not match. Expected:0x51796 got:0x10887
2017-04-14T04:17:07.166Z,1492143427.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:07.575Z,1492143427.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:07.844Z,1492143427.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:08.284Z,1492143428.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:08.785Z,1492143428.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:09.240Z,1492143429.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:09.561Z,1492143429.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:09.900Z,1492143429.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:10.306Z,1492143430.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:10.689Z,1492143430.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:11.173Z,1492143431.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:11.522Z,1492143431.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:11.865Z,1492143431.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:12.209Z,1492143432.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:12.712Z,1492143432.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:13.018Z,1492143433.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:13.484Z,1492143433.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:13.797Z,1492143433.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:14.236Z,1492143434.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:14.702Z,1492143434.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:15.030Z,1492143435.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:15.404Z,1492143435.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:15.830Z,1492143435.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:16.290Z,1492143436.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:16.774Z,1492143436.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:17.125Z,1492143437.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:17.478Z,1492143437.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:17.847Z,1492143437.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:18.258Z,1492143438.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:18.694Z,1492143438.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:19.037Z,1492143439.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:19.455Z,1492143439.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:19.952Z,1492143439.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:20.276Z,1492143440.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:20.692Z,1492143440.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:21.017Z,1492143441.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:21.425Z,1492143441.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:21.812Z,1492143441.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:22.192Z,1492143442.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:22.680Z,1492143442.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:23.054Z,1492143443.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:23.502Z,1492143443.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:23.804Z,1492143443.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:24.221Z,1492143444.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:24.629Z,1492143444.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:25.080Z,1492143445.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:25.412Z,1492143445.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:25.810Z,1492143445.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:26.218Z,1492143446.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:26.701Z,1492143446.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:27.013Z,1492143447.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:27.425Z,1492143447.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:27.898Z,1492143447.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:28.216Z,1492143448.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:28.697Z,1492143448.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:29.033Z,1492143449.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:29.427Z,1492143449.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:29.850Z,1492143449.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:30.199Z,1492143450.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:30.729Z,1492143450.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:31.038Z,1492143451.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:31.498Z,1492143451.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:31.848Z,1492143451.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:32.228Z,1492143452.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:32.653Z,1492143452.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:33.006Z,1492143453.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:33.419Z,1492143453.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:33.812Z,1492143453.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:34.268Z,1492143454.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:34.702Z,1492143454.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:35.010Z,1492143455.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:35.410Z,1492143455.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:35.875Z,1492143455.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:36.269Z,1492143456.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:36.647Z,1492143456.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:37.061Z,1492143457.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:37.428Z,1492143457.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:37.836Z,1492143457.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:38.258Z,1492143458.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:38.628Z,1492143458.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:39.003Z,1492143459.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:39.437Z,1492143459.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:39.859Z,1492143459.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:40.260Z,1492143460.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:40.674Z,1492143460.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:41.031Z,1492143461.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:41.446Z,1492143461.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:42.046Z,1492143462.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:42.261Z,1492143462.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:42.694Z,1492143462.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:43.038Z,1492143463.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:43.447Z,1492143463.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:43.833Z,1492143463.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:44.199Z,1492143464.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:44.675Z,1492143464.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:45.028Z,1492143465.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:45.404Z,1492143465.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:45.803Z,1492143465.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:46.209Z,1492143466.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:46.668Z,1492143466.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:47.014Z,1492143467.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:47.417Z,1492143467.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:47.826Z,1492143467.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:48.276Z,1492143468.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:48.690Z,1492143468.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:49.095Z,1492143469.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:49.455Z,1492143469.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:49.872Z,1492143469.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:50.266Z,1492143470.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:50.665Z,1492143470.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:51.026Z,1492143471.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:51.431Z,1492143471.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:51.831Z,1492143471.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:52.236Z,1492143472.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:52.621Z,1492143472.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:53.058Z,1492143473.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:53.430Z,1492143473.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:53.794Z,1492143473.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:54.214Z,1492143474.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:54.670Z,1492143474.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:55.018Z,1492143475.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:55.422Z,1492143475.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:55.967Z,1492143475.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:56.271Z,1492143476.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:56.698Z,1492143476.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:57.044Z,1492143477.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:57.456Z,1492143477.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:57.914Z,1492143477.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:58.288Z,1492143478.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:58.726Z,1492143478.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:59.049Z,1492143479.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:59.456Z,1492143479.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:17:59.844Z,1492143479.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:00.238Z,1492143480.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:00.665Z,1492143480.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:01.033Z,1492143481.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:01.438Z,1492143481.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:01.816Z,1492143481.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:02.225Z,1492143482.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:02.713Z,1492143482.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:03.050Z,1492143483.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:03.408Z,1492143483.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:07.512Z,1492143487.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:07.628Z,1492143487.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:08.110Z,1492143488.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:08.425Z,1492143488.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:08.827Z,1492143488.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:09.249Z,1492143489.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:09.639Z,1492143489.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:10.014Z,1492143490.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:10.410Z,1492143490.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:10.814Z,1492143490.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:11.318Z,1492143491.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:11.618Z,1492143491.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:12.055Z,1492143492.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:12.422Z,1492143492.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:12.838Z,1492143492.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:13.207Z,1492143493.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:13.635Z,1492143493.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:14.008Z,1492143494.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:14.414Z,1492143494.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:14.808Z,1492143494.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:15.217Z,1492143495.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:15.612Z,1492143495.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:16.013Z,1492143496.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:16.416Z,1492143496.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:16.809Z,1492143496.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:17.217Z,1492143497.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:17.608Z,1492143497.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:18.009Z,1492143498.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:18.418Z,1492143498.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:18.883Z,1492143498.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:19.208Z,1492143499.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:19.624Z,1492143499.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:19.998Z,1492143499.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:20.400Z,1492143500.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:20.882Z,1492143500.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:21.262Z,1492143501.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:21.617Z,1492143501.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:22.017Z,1492143502.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:22.641Z,1492143502.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:22.838Z,1492143502.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:23.283Z,1492143503.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:23.658Z,1492143503.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:24.023Z,1492143504.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:24.435Z,1492143504.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:24.821Z,1492143504.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:25.266Z,1492143505.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:25.662Z,1492143505.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:26.042Z,1492143506.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:26.421Z,1492143506.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:26.868Z,1492143506.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:27.198Z,1492143507.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:27.644Z,1492143507.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:28.055Z,1492143508.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:28.402Z,1492143508.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:28.816Z,1492143508.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:29.214Z,1492143509.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:29.619Z,1492143509.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:30.004Z,1492143510.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:30.409Z,1492143510.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:30.811Z,1492143510.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:31.207Z,1492143511.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:31.614Z,1492143511.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:32.010Z,1492143512.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:32.417Z,1492143512.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:32.953Z,1492143512.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:33.213Z,1492143513.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:33.613Z,1492143513.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:34.068Z,1492143514.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:34.429Z,1492143514.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:34.926Z,1492143514.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:35.324Z,1492143515.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:35.657Z,1492143515.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:36.094Z,1492143516.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:36.514Z,1492143516.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:36.837Z,1492143516.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:37.210Z,1492143517.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:37.609Z,1492143517.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:38.008Z,1492143518.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:38.418Z,1492143518.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:38.820Z,1492143518.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:39.221Z,1492143519.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:39.653Z,1492143519.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:40.047Z,1492143520.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:40.400Z,1492143520.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:40.846Z,1492143520.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:41.208Z,1492143521.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:41.642Z,1492143521.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:42.046Z,1492143522.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:42.414Z,1492143522.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:42.821Z,1492143522.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:43.211Z,1492143523.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:43.615Z,1492143523.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:44.015Z,1492143524.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:44.401Z,1492143524.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:44.810Z,1492143524.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:45.210Z,1492143525.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:45.609Z,1492143525.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:46.057Z,1492143526.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:46.442Z,1492143526.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:46.855Z,1492143526.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:47.216Z,1492143527.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:47.622Z,1492143527.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:48.013Z,1492143528.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:48.453Z,1492143528.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:48.916Z,1492143528.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:49.220Z,1492143529.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:49.694Z,1492143529.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:50.049Z,1492143530.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:50.414Z,1492143530.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:50.852Z,1492143530.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:51.228Z,1492143531.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:51.614Z,1492143531.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:52.052Z,1492143532.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:52.501Z,1492143532.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:52.835Z,1492143532.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:53.214Z,1492143533.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:53.610Z,1492143533.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:54.061Z,1492143534.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:54.487Z,1492143534.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:54.822Z,1492143534.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:55.244Z,1492143535.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:55.607Z,1492143535.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:56.046Z,1492143536.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:56.498Z,1492143536.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:56.828Z,1492143536.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:57.218Z,1492143537.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:57.622Z,1492143537.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:58.002Z,1492143538.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:58.421Z,1492143538.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:58.828Z,1492143538.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:59.249Z,1492143539.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:18:59.607Z,1492143539.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:00.040Z,1492143540.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:00.407Z,1492143540.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:00.903Z,1492143540.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:01.220Z,1492143541.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:01.618Z,1492143541.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:02.018Z,1492143542.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:02.408Z,1492143542.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:02.870Z,1492143542.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:03.265Z,1492143543.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:03.610Z,1492143543.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:04.026Z,1492143544.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:04.449Z,1492143544.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:04.820Z,1492143544.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:08.720Z,1492143548.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:08.910Z,1492143548.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:09.342Z,1492143549.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:09.709Z,1492143549.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:10.117Z,1492143550.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:10.548Z,1492143550.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:10.901Z,1492143550.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:11.288Z,1492143551.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:11.653Z,1492143551.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:12.060Z,1492143552.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:12.530Z,1492143552.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:12.847Z,1492143552.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:13.247Z,1492143553.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:13.650Z,1492143553.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:14.056Z,1492143554.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:14.454Z,1492143554.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:14.862Z,1492143554.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:15.258Z,1492143555.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:15.657Z,1492143555.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:16.053Z,1492143556.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:16.514Z,1492143556.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:16.884Z,1492143556.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:17.255Z,1492143557.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:17.652Z,1492143557.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:18.057Z,1492143558.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:18.560Z,1492143558.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:18.876Z,1492143558.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:19.269Z,1492143559.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:19.654Z,1492143559.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:20.062Z,1492143560.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:20.520Z,1492143560.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:20.868Z,1492143560.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:21.241Z,1492143561.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:21.645Z,1492143561.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:22.056Z,1492143562.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:22.511Z,1492143562.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:22.892Z,1492143562.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:23.287Z,1492143563.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:23.684Z,1492143563.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:24.051Z,1492143564.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:24.506Z,1492143564.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:24.886Z,1492143564.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:25.272Z,1492143565.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:25.664Z,1492143565.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:26.043Z,1492143566.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:26.531Z,1492143566.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:26.878Z,1492143566.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:27.254Z,1492143567.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:27.650Z,1492143567.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:28.045Z,1492143568.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:28.467Z,1492143568.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:28.900Z,1492143568.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:29.283Z,1492143569.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:29.645Z,1492143569.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:30.066Z,1492143570.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:30.459Z,1492143570.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:30.873Z,1492143570.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:31.260Z,1492143571.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:31.672Z,1492143571.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:32.059Z,1492143572.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:32.498Z,1492143572.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:32.882Z,1492143572.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:33.289Z,1492143573.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:33.676Z,1492143573.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:34.073Z,1492143574.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:34.530Z,1492143574.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:34.858Z,1492143574.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:35.294Z,1492143575.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:35.301Z,1492143575.302 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:35.302Z,1492143575.302 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:19:35.302Z,1492143575.302 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:19:35.348Z,1492143575.348 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:19:35.697Z,1492143575.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:35.750Z,1492143575.750 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:19:35.751Z,1492143575.750 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:19:36.113Z,1492143576.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:36.147Z,1492143576.147 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:19:36.159Z,1492143576.159 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:19:36.160Z,1492143576.160 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:19:36.517Z,1492143576.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:36.869Z,1492143576.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:37.310Z,1492143577.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:37.665Z,1492143577.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:38.089Z,1492143578.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:38.507Z,1492143578.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:38.894Z,1492143578.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:39.314Z,1492143579.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:39.668Z,1492143579.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:40.067Z,1492143580.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:40.517Z,1492143580.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:40.873Z,1492143580.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:41.246Z,1492143581.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:41.732Z,1492143581.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:42.079Z,1492143582.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:42.461Z,1492143582.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:42.861Z,1492143582.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:43.268Z,1492143583.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:43.660Z,1492143583.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:44.097Z,1492143584.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:44.458Z,1492143584.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:44.918Z,1492143584.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:45.273Z,1492143585.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:45.672Z,1492143585.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:46.083Z,1492143586.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:46.496Z,1492143586.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:46.917Z,1492143586.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:46.917Z,1492143586.917 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:19:46.917Z,1492143586.917 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:19:46.973Z,1492143586.973 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:46.973Z,1492143586.973 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:19:46.973Z,1492143586.973 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:19:47.040Z,1492143587.040 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:19:47.040Z,1492143587.040 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:19:47.361Z,1492143587.361 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:19:47.361Z,1492143587.361 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:19:47.361Z,1492143587.361 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:19:47.361Z,1492143587.361 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:19:47.670Z,1492143587.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:19:47.670Z,1492143587.670 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:19:47.671Z,1492143587.671 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:19:47.704Z,1492143587.704 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:19:47.704Z,1492143587.704 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:19:47.705Z,1492143587.705 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:19:48.075Z,1492143588.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:48.479Z,1492143588.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:48.878Z,1492143588.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:49.257Z,1492143589.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:49.660Z,1492143589.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:50.056Z,1492143590.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:50.476Z,1492143590.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:50.861Z,1492143590.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:51.336Z,1492143591.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:51.684Z,1492143591.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:52.082Z,1492143592.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:52.484Z,1492143592.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:52.922Z,1492143592.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:53.282Z,1492143593.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:53.650Z,1492143593.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:54.097Z,1492143594.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:54.525Z,1492143594.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:54.869Z,1492143594.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:55.262Z,1492143595.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:55.656Z,1492143595.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:56.068Z,1492143596.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:56.442Z,1492143596.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:56.874Z,1492143596.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:57.250Z,1492143597.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:57.654Z,1492143597.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:58.053Z,1492143598.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:58.461Z,1492143598.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:58.874Z,1492143598.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:59.263Z,1492143599.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:19:59.651Z,1492143599.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:00.057Z,1492143600.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:00.473Z,1492143600.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:00.860Z,1492143600.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:01.266Z,1492143601.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:01.663Z,1492143601.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:02.056Z,1492143602.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:02.482Z,1492143602.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:02.861Z,1492143602.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:03.244Z,1492143603.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:03.673Z,1492143603.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:07.334Z,1492143607.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:07.484Z,1492143607.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:07.854Z,1492143607.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:08.240Z,1492143608.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:08.680Z,1492143608.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:09.051Z,1492143609.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:09.440Z,1492143609.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:09.833Z,1492143609.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:10.282Z,1492143610.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:10.736Z,1492143610.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:11.048Z,1492143611.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:11.445Z,1492143611.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:11.851Z,1492143611.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:12.245Z,1492143612.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:12.738Z,1492143612.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:13.033Z,1492143613.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:13.438Z,1492143613.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:13.836Z,1492143613.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:14.232Z,1492143614.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:14.641Z,1492143614.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:15.050Z,1492143615.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:15.442Z,1492143615.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:15.838Z,1492143615.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:16.240Z,1492143616.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:16.625Z,1492143616.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:17.057Z,1492143617.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:17.434Z,1492143617.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:17.838Z,1492143617.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:18.249Z,1492143618.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:18.697Z,1492143618.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:19.047Z,1492143619.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:19.454Z,1492143619.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:19.945Z,1492143619.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:20.403Z,1492143620.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:20.669Z,1492143620.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:21.139Z,1492143621.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:21.445Z,1492143621.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:21.854Z,1492143621.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:22.289Z,1492143622.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:22.637Z,1492143622.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:23.082Z,1492143623.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:23.475Z,1492143623.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:23.835Z,1492143623.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:24.242Z,1492143624.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:24.719Z,1492143624.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:25.043Z,1492143625.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:25.449Z,1492143625.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:25.849Z,1492143625.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:26.232Z,1492143626.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:26.708Z,1492143626.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:27.054Z,1492143627.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:27.432Z,1492143627.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:27.867Z,1492143627.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:28.259Z,1492143628.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:28.633Z,1492143628.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:29.036Z,1492143629.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:29.448Z,1492143629.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:29.836Z,1492143629.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:30.236Z,1492143630.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:30.632Z,1492143630.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:31.036Z,1492143631.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:31.432Z,1492143631.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:31.838Z,1492143631.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:32.238Z,1492143632.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:32.650Z,1492143632.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:33.055Z,1492143633.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:33.453Z,1492143633.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:33.833Z,1492143633.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:34.238Z,1492143634.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:34.635Z,1492143634.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:35.045Z,1492143635.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:35.490Z,1492143635.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:35.832Z,1492143635.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:36.266Z,1492143636.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:36.642Z,1492143636.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:37.077Z,1492143637.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:37.435Z,1492143637.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:37.874Z,1492143637.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:38.245Z,1492143638.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:38.720Z,1492143638.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:39.038Z,1492143639.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:39.433Z,1492143639.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:39.836Z,1492143639.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:40.238Z,1492143640.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:40.738Z,1492143640.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:41.050Z,1492143641.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:41.434Z,1492143641.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:41.834Z,1492143641.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:42.234Z,1492143642.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:42.648Z,1492143642.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:43.041Z,1492143643.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:43.448Z,1492143643.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:43.843Z,1492143643.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:44.264Z,1492143644.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:44.657Z,1492143644.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:45.035Z,1492143645.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:45.434Z,1492143645.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:45.877Z,1492143645.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:46.355Z,1492143646.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:46.737Z,1492143646.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:47.031Z,1492143647.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:47.442Z,1492143647.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:47.860Z,1492143647.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:48.321Z,1492143648.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:48.645Z,1492143648.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:49.068Z,1492143649.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:49.454Z,1492143649.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:49.871Z,1492143649.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:50.259Z,1492143650.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:50.628Z,1492143650.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:51.059Z,1492143651.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:51.430Z,1492143651.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:51.859Z,1492143651.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:52.260Z,1492143652.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:52.738Z,1492143652.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:53.038Z,1492143653.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:53.450Z,1492143653.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:53.833Z,1492143653.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:54.250Z,1492143654.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:54.700Z,1492143654.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:55.151Z,1492143655.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:55.451Z,1492143655.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:55.847Z,1492143655.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:56.297Z,1492143656.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:56.656Z,1492143656.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:57.032Z,1492143657.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:57.449Z,1492143657.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:57.836Z,1492143657.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:58.301Z,1492143658.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:58.657Z,1492143658.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:59.069Z,1492143659.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:59.443Z,1492143659.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:20:59.843Z,1492143659.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:00.309Z,1492143660.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:00.661Z,1492143660.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:01.037Z,1492143661.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:01.438Z,1492143661.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:01.838Z,1492143661.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:02.335Z,1492143662.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:02.656Z,1492143662.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:03.072Z,1492143663.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:03.461Z,1492143663.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:03.890Z,1492143663.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:05.608Z,1492143665.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:21:06.404Z,1492143666.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:21:08.002Z,1492143668.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:08.127Z,1492143668.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:08.514Z,1492143668.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:08.950Z,1492143668.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:09.311Z,1492143669.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:09.744Z,1492143669.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:10.115Z,1492143670.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:10.529Z,1492143670.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:10.922Z,1492143670.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:11.315Z,1492143671.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:11.715Z,1492143671.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:12.117Z,1492143672.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:12.503Z,1492143672.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:12.925Z,1492143672.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:13.354Z,1492143673.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:13.720Z,1492143673.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:14.121Z,1492143674.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:14.510Z,1492143674.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:14.978Z,1492143674.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:15.297Z,1492143675.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:15.729Z,1492143675.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:16.093Z,1492143676.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:16.546Z,1492143676.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:16.906Z,1492143676.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:17.368Z,1492143677.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:17.740Z,1492143677.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:18.134Z,1492143678.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:18.516Z,1492143678.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:19.040Z,1492143679.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:19.400Z,1492143679.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:19.721Z,1492143679.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:20.160Z,1492143680.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:20.612Z,1492143680.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:20.933Z,1492143680.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:21.324Z,1492143681.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:21.715Z,1492143681.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:22.171Z,1492143682.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:22.654Z,1492143682.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:22.902Z,1492143682.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:23.327Z,1492143683.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:23.808Z,1492143683.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:24.273Z,1492143684.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:24.522Z,1492143684.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:24.915Z,1492143684.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:25.314Z,1492143685.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:25.706Z,1492143685.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:26.170Z,1492143686.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:26.583Z,1492143686.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:27.012Z,1492143687.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:27.400Z,1492143687.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:27.947Z,1492143687.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:28.396Z,1492143688.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:28.678Z,1492143688.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:29.043Z,1492143689.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:29.480Z,1492143689.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:29.932Z,1492143689.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:30.334Z,1492143690.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:30.778Z,1492143690.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:31.035Z,1492143691.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:31.516Z,1492143691.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:31.846Z,1492143691.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:32.214Z,1492143692.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:32.679Z,1492143692.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:33.049Z,1492143693.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:33.415Z,1492143693.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:33.826Z,1492143693.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:34.235Z,1492143694.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:34.690Z,1492143694.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:35.016Z,1492143695.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:35.410Z,1492143695.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:35.813Z,1492143695.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:36.218Z,1492143696.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:36.701Z,1492143696.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:37.065Z,1492143697.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:37.479Z,1492143697.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:37.832Z,1492143697.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:38.417Z,1492143698.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:38.715Z,1492143698.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:39.085Z,1492143699.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:39.421Z,1492143699.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:39.884Z,1492143699.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:40.295Z,1492143700.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:40.629Z,1492143700.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:41.017Z,1492143701.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:41.498Z,1492143701.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:41.804Z,1492143701.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:42.310Z,1492143702.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:42.675Z,1492143702.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:43.059Z,1492143703.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:43.425Z,1492143703.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:43.828Z,1492143703.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:44.334Z,1492143704.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:44.629Z,1492143704.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:45.013Z,1492143705.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:45.418Z,1492143705.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:45.814Z,1492143705.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:46.269Z,1492143706.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:46.656Z,1492143706.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:47.019Z,1492143707.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:47.414Z,1492143707.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:47.822Z,1492143707.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:48.221Z,1492143708.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:48.716Z,1492143708.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:49.044Z,1492143709.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:49.501Z,1492143709.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:49.832Z,1492143709.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:50.226Z,1492143710.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:50.634Z,1492143710.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:51.107Z,1492143711.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:51.405Z,1492143711.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:51.826Z,1492143711.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:52.304Z,1492143712.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:52.634Z,1492143712.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:53.004Z,1492143713.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:53.466Z,1492143713.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:53.805Z,1492143713.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:54.256Z,1492143714.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:54.641Z,1492143714.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:55.046Z,1492143715.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:55.445Z,1492143715.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:55.834Z,1492143715.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:56.264Z,1492143716.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:56.632Z,1492143716.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:57.034Z,1492143717.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:57.406Z,1492143717.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:57.806Z,1492143717.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:58.281Z,1492143718.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:58.669Z,1492143718.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:59.008Z,1492143719.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:59.416Z,1492143719.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:21:59.460Z,1492143719.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:21:59.813Z,1492143719.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:00.256Z,1492143720.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:00.293Z,1492143720.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:00.666Z,1492143720.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:00.740Z,1492143720.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:01.041Z,1492143721.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:01.456Z,1492143721.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:01.536Z,1492143721.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:01.822Z,1492143721.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:02.226Z,1492143722.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:02.338Z,1492143722.338 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:02.614Z,1492143722.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:02.944Z,1492143722.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:03.026Z,1492143723.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:03.428Z,1492143723.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:03.441Z,1492143723.441 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:22:03.441Z,1492143723.441 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:22:03.441Z,1492143723.441 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:22:03.441Z,1492143723.441 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:22:03.740Z,1492143723.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:03.822Z,1492143723.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:03.840Z,1492143723.840 [Default:CheckIn:D] Stopped
2017-04-14T04:22:03.840Z,1492143723.840 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:22:04.206Z,1492143724.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:04.247Z,1492143724.247 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 55.975354 min 
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn:E] Stopped
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn] Stopped
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn](INFO): Running loop #9
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn] Running Loop=9
2017-04-14T04:22:04.248Z,1492143724.248 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:22:04.249Z,1492143724.249 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:22:04.536Z,1492143724.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:04.940Z,1492143724.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:05.736Z,1492143725.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:06.532Z,1492143726.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:06.936Z,1492143726.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:08.307Z,1492143728.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:08.393Z,1492143728.393 [NAL9602](INFO): Powering up
2017-04-14T04:22:08.439Z,1492143728.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:08.841Z,1492143728.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:09.209Z,1492143729.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:09.649Z,1492143729.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:10.040Z,1492143730.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:10.410Z,1492143730.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:10.814Z,1492143730.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:11.220Z,1492143731.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:11.609Z,1492143731.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:12.006Z,1492143732.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:12.418Z,1492143732.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:12.830Z,1492143732.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:13.202Z,1492143733.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:13.616Z,1492143733.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:14.029Z,1492143734.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:14.413Z,1492143734.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:14.475Z,1492143734.474 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:22:14.829Z,1492143734.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:15.218Z,1492143735.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:15.594Z,1492143735.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:16.002Z,1492143736.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:16.428Z,1492143736.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:16.821Z,1492143736.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:17.209Z,1492143737.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:17.643Z,1492143737.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:18.006Z,1492143738.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:18.405Z,1492143738.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:18.826Z,1492143738.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:19.221Z,1492143739.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:19.565Z,1492143739.565 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:22:19.614Z,1492143739.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:20.020Z,1492143740.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:20.417Z,1492143740.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:20.953Z,1492143740.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:21.390Z,1492143741.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:21.642Z,1492143741.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:22.026Z,1492143742.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:22.533Z,1492143742.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:22.880Z,1492143742.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:23.420Z,1492143743.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:23.803Z,1492143743.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:24.255Z,1492143744.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:24.663Z,1492143744.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:25.010Z,1492143745.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:25.391Z,1492143745.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:25.780Z,1492143745.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:26.385Z,1492143746.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:26.618Z,1492143746.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:26.999Z,1492143746.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:27.385Z,1492143747.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:27.866Z,1492143747.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:28.280Z,1492143748.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:28.566Z,1492143748.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:28.974Z,1492143748.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:29.356Z,1492143749.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:29.784Z,1492143749.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:30.158Z,1492143750.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:30.559Z,1492143750.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:30.962Z,1492143750.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:31.365Z,1492143751.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:31.780Z,1492143751.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:32.174Z,1492143752.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:32.551Z,1492143752.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:32.959Z,1492143752.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:33.359Z,1492143753.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:33.773Z,1492143753.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:34.156Z,1492143754.157 [NAL9602](INFO): SBD MO Status=0, MOMSN=2102, MT Status=0, MTMSN=0
2017-04-14T04:22:34.157Z,1492143754.157 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:22:34.256Z,1492143754.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:34.570Z,1492143754.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:34.993Z,1492143754.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:35.404Z,1492143755.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:35.787Z,1492143755.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:36.260Z,1492143756.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:36.298Z,1492143756.298 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:36.298Z,1492143756.298 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:22:36.299Z,1492143756.299 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:22:36.371Z,1492143756.372 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:22:36.610Z,1492143756.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:36.685Z,1492143756.685 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:22:36.686Z,1492143756.685 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:22:36.991Z,1492143756.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:37.025Z,1492143757.025 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:22:37.026Z,1492143757.026 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:22:37.026Z,1492143757.026 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:22:37.366Z,1492143757.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:37.763Z,1492143757.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:38.241Z,1492143758.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:38.595Z,1492143758.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:38.988Z,1492143758.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:39.362Z,1492143759.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:39.749Z,1492143759.749 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:22:39.749Z,1492143759.749 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:22:39.749Z,1492143759.749 [BPC1](ERROR): Communications Fault
2017-04-14T04:22:39.789Z,1492143759.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:39.826Z,1492143759.826 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:22:40.202Z,1492143760.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:40.639Z,1492143760.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:40.991Z,1492143760.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:41.010Z,1492143761.010 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:22:41.010Z,1492143761.010 [BPC1] No Fault, FailCount= 1
2017-04-14T04:22:41.438Z,1492143761.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:41.760Z,1492143761.760 [PNI_TCM](ERROR): CRC does not match. Expected:0x45626 got:0x55273
2017-04-14T04:22:41.810Z,1492143761.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:42.223Z,1492143762.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:42.581Z,1492143762.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:42.988Z,1492143762.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:43.364Z,1492143763.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:43.456Z,1492143763.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:43.816Z,1492143763.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:44.117Z,1492143764.117 [NAL9602](INFO): GPS fix at 20170414T042248: (36.802363, -121.787171)
2017-04-14T04:22:44.256Z,1492143764.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:22:44.292Z,1492143764.292 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:22:44.292Z,1492143764.292 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:22:44.779Z,1492143764.779 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:44.780Z,1492143764.780 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:22:44.780Z,1492143764.780 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:22:44.810Z,1492143764.810 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:44.810Z,1492143764.810 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:22:44.811Z,1492143764.810 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:22:44.906Z,1492143764.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:22:44.906Z,1492143764.907 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:22:46.078Z,1492143766.078 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:22:46.078Z,1492143766.078 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:22:46.079Z,1492143766.079 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:22:46.087Z,1492143766.087 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:22:46.318Z,1492143766.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:22:46.319Z,1492143766.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:22:46.347Z,1492143766.348 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:22:46.376Z,1492143766.376 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:22:46.376Z,1492143766.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:22:46.376Z,1492143766.376 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:22:51.943Z,1492143771.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:52.027Z,1492143772.027 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0040.lzma
2017-04-14T04:22:52.033Z,1492143772.033 [NAL9602](INFO): Powering down
2017-04-14T04:22:52.268Z,1492143772.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:52.446Z,1492143772.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:52.782Z,1492143772.782 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0040.lzma.bak
2017-04-14T04:22:52.782Z,1492143772.782 [DataOverHttps](INFO): SBD MOMSN=4885143
2017-04-14T04:22:52.835Z,1492143772.835 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:22:52.835Z,1492143772.835 [BPC1] Data Fault, FailCount= 2
2017-04-14T04:22:52.835Z,1492143772.835 [BPC1](ERROR): Data Fault
2017-04-14T04:22:52.844Z,1492143772.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:52.896Z,1492143772.896 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:22:53.257Z,1492143773.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:53.618Z,1492143773.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:57.394Z,1492143777.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:57.415Z,1492143777.415 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:22:57.415Z,1492143777.415 [BPC1] No Fault, FailCount= 2
2017-04-14T04:22:57.592Z,1492143777.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:57.899Z,1492143777.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:58.313Z,1492143778.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:58.707Z,1492143778.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:22:59.112Z,1492143779.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:03.381Z,1492143783.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:03.474Z,1492143783.474 [DataOverHttps](INFO): Sending 119 bytes from file Logs/20170414T032153/Express0041.lzma
2017-04-14T04:23:03.543Z,1492143783.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:03.933Z,1492143783.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:04.269Z,1492143784.270 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0041.lzma.bak
2017-04-14T04:23:04.270Z,1492143784.270 [DataOverHttps](INFO): SBD MOMSN=4885146
2017-04-14T04:23:04.379Z,1492143784.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:04.735Z,1492143784.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:04.744Z,1492143784.744 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:23:04.745Z,1492143784.745 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:23:04.745Z,1492143784.745 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:23:05.140Z,1492143785.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:11.421Z,1492143791.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:11.562Z,1492143791.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:11.959Z,1492143791.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:12.430Z,1492143792.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:12.854Z,1492143792.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:13.166Z,1492143793.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:13.571Z,1492143793.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:13.932Z,1492143793.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:14.424Z,1492143794.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:14.754Z,1492143794.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:15.205Z,1492143795.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:15.575Z,1492143795.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:16.114Z,1492143796.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:16.413Z,1492143796.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:16.829Z,1492143796.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:17.273Z,1492143797.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:17.574Z,1492143797.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:17.934Z,1492143797.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:18.356Z,1492143798.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:18.774Z,1492143798.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:19.156Z,1492143799.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:19.558Z,1492143799.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:19.938Z,1492143799.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:20.352Z,1492143800.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:20.734Z,1492143800.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:21.136Z,1492143801.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:21.538Z,1492143801.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:21.950Z,1492143801.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:22.354Z,1492143802.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:22.736Z,1492143802.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:23.161Z,1492143803.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:23.536Z,1492143803.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:23.994Z,1492143803.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:24.337Z,1492143804.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:24.843Z,1492143804.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:25.161Z,1492143805.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:25.577Z,1492143805.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:25.932Z,1492143805.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:26.411Z,1492143806.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:26.765Z,1492143806.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:27.166Z,1492143807.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:27.538Z,1492143807.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:27.934Z,1492143807.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:28.417Z,1492143808.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:28.767Z,1492143808.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:29.212Z,1492143809.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:29.632Z,1492143809.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:29.963Z,1492143809.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:30.405Z,1492143810.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:30.992Z,1492143810.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:31.254Z,1492143811.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:31.623Z,1492143811.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:32.112Z,1492143812.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:32.426Z,1492143812.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:32.895Z,1492143812.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:33.188Z,1492143813.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:33.616Z,1492143813.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:34.184Z,1492143814.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:34.439Z,1492143814.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:34.818Z,1492143814.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:35.208Z,1492143815.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:35.602Z,1492143815.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:36.087Z,1492143816.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:36.398Z,1492143816.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:36.788Z,1492143816.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:37.215Z,1492143817.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:37.625Z,1492143817.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:38.021Z,1492143818.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:38.413Z,1492143818.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:38.832Z,1492143818.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:39.189Z,1492143819.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:39.606Z,1492143819.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:40.014Z,1492143820.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:40.442Z,1492143820.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:40.796Z,1492143820.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:41.204Z,1492143821.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:41.592Z,1492143821.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:41.979Z,1492143821.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:42.471Z,1492143822.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:42.780Z,1492143822.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:43.183Z,1492143823.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:43.586Z,1492143823.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:44.070Z,1492143824.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:44.387Z,1492143824.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:44.809Z,1492143824.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:45.181Z,1492143825.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:45.585Z,1492143825.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:46.053Z,1492143826.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:46.393Z,1492143826.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:46.794Z,1492143826.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:47.194Z,1492143827.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:47.594Z,1492143827.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:48.069Z,1492143828.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:48.401Z,1492143828.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:48.790Z,1492143828.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:49.186Z,1492143829.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:49.588Z,1492143829.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:50.063Z,1492143830.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:50.382Z,1492143830.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:50.830Z,1492143830.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:51.195Z,1492143831.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:51.634Z,1492143831.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:51.985Z,1492143831.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:52.418Z,1492143832.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:52.807Z,1492143832.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:53.176Z,1492143833.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:53.601Z,1492143833.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:54.018Z,1492143834.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:54.426Z,1492143834.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:54.790Z,1492143834.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:55.195Z,1492143835.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:55.574Z,1492143835.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:55.982Z,1492143835.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:56.423Z,1492143836.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:56.780Z,1492143836.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:57.180Z,1492143837.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:57.582Z,1492143837.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:58.115Z,1492143838.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:58.432Z,1492143838.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:58.820Z,1492143838.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:59.185Z,1492143839.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:23:59.586Z,1492143839.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:00.052Z,1492143840.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:00.426Z,1492143840.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:00.782Z,1492143840.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:01.181Z,1492143841.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:01.592Z,1492143841.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:02.083Z,1492143842.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:02.400Z,1492143842.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:02.783Z,1492143842.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:03.248Z,1492143843.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:03.634Z,1492143843.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:04.083Z,1492143844.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:04.437Z,1492143844.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:04.786Z,1492143844.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:05.199Z,1492143845.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:09.006Z,1492143849.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:09.151Z,1492143849.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:09.514Z,1492143849.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:09.914Z,1492143849.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:10.389Z,1492143850.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:10.712Z,1492143850.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:11.096Z,1492143851.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:11.537Z,1492143851.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:11.904Z,1492143851.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:12.316Z,1492143852.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:12.715Z,1492143852.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:13.130Z,1492143853.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:13.512Z,1492143853.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:13.998Z,1492143853.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:14.303Z,1492143854.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:14.724Z,1492143854.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:15.116Z,1492143855.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:15.514Z,1492143855.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:15.942Z,1492143855.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:16.309Z,1492143856.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:16.722Z,1492143856.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:17.114Z,1492143857.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:17.519Z,1492143857.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:17.976Z,1492143857.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:18.310Z,1492143858.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:18.718Z,1492143858.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:19.109Z,1492143859.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:19.585Z,1492143859.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:19.914Z,1492143859.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:20.334Z,1492143860.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:20.701Z,1492143860.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:21.137Z,1492143861.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:21.528Z,1492143861.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:21.905Z,1492143861.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:22.374Z,1492143862.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:22.705Z,1492143862.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:23.162Z,1492143863.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:23.519Z,1492143863.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:23.937Z,1492143863.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:24.375Z,1492143864.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:24.751Z,1492143864.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:25.118Z,1492143865.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:25.518Z,1492143865.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:26.046Z,1492143866.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:26.354Z,1492143866.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:26.765Z,1492143866.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:27.113Z,1492143867.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:27.511Z,1492143867.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:28.014Z,1492143868.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:28.306Z,1492143868.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:28.713Z,1492143868.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:29.117Z,1492143869.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:29.505Z,1492143869.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:29.996Z,1492143869.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:30.297Z,1492143870.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:30.704Z,1492143870.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:31.097Z,1492143871.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:31.504Z,1492143871.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:32.032Z,1492143872.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:32.310Z,1492143872.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:32.747Z,1492143872.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:33.108Z,1492143873.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:33.549Z,1492143873.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:33.908Z,1492143873.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:34.350Z,1492143874.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:34.738Z,1492143874.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:35.120Z,1492143875.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:35.504Z,1492143875.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:35.905Z,1492143875.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:36.353Z,1492143876.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:36.704Z,1492143876.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:37.109Z,1492143877.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:37.503Z,1492143877.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:37.909Z,1492143877.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:38.353Z,1492143878.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:38.709Z,1492143878.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:39.113Z,1492143879.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:39.511Z,1492143879.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:39.988Z,1492143879.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:40.296Z,1492143880.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:40.746Z,1492143880.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:41.209Z,1492143881.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:41.506Z,1492143881.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:42.034Z,1492143882.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:42.338Z,1492143882.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:42.709Z,1492143882.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:43.116Z,1492143883.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:43.510Z,1492143883.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:44.057Z,1492143884.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:44.335Z,1492143884.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:44.786Z,1492143884.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:45.140Z,1492143885.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:45.562Z,1492143885.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:46.017Z,1492143886.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:46.499Z,1492143886.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:46.762Z,1492143886.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:47.162Z,1492143887.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:47.536Z,1492143887.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:47.990Z,1492143887.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:48.309Z,1492143888.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:48.774Z,1492143888.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:49.095Z,1492143889.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:49.497Z,1492143889.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:49.915Z,1492143889.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:50.326Z,1492143890.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:50.718Z,1492143890.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:51.114Z,1492143891.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:51.506Z,1492143891.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:51.953Z,1492143891.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:52.340Z,1492143892.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:52.748Z,1492143892.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:53.124Z,1492143893.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:53.506Z,1492143893.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:53.000Z,1492143894.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:54.322Z,1492143894.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:54.726Z,1492143894.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:55.102Z,1492143895.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:55.506Z,1492143895.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:55.958Z,1492143895.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:56.327Z,1492143896.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:56.710Z,1492143896.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:57.120Z,1492143897.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:57.586Z,1492143897.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:58.038Z,1492143898.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:58.318Z,1492143898.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:58.716Z,1492143898.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:59.125Z,1492143899.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:24:59.582Z,1492143899.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:00.027Z,1492143900.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:00.365Z,1492143900.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:00.764Z,1492143900.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:01.111Z,1492143901.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:01.540Z,1492143901.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:02.022Z,1492143902.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:02.339Z,1492143902.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:02.762Z,1492143902.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:03.166Z,1492143903.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:03.516Z,1492143903.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:03.933Z,1492143903.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:04.390Z,1492143904.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:04.731Z,1492143904.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:05.145Z,1492143905.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:05.535Z,1492143905.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:09.317Z,1492143909.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:09.478Z,1492143909.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:09.913Z,1492143909.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:10.233Z,1492143910.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:10.637Z,1492143910.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:11.033Z,1492143911.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:11.455Z,1492143911.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:11.853Z,1492143911.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:12.242Z,1492143912.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:12.632Z,1492143912.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:13.061Z,1492143913.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:13.433Z,1492143913.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:13.985Z,1492143913.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:14.251Z,1492143914.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:14.654Z,1492143914.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:15.047Z,1492143915.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:15.509Z,1492143915.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:15.844Z,1492143915.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:16.327Z,1492143916.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:16.648Z,1492143916.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:17.110Z,1492143917.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:17.472Z,1492143917.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:17.865Z,1492143917.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:18.361Z,1492143918.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:18.643Z,1492143918.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:19.052Z,1492143919.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:19.458Z,1492143919.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:19.851Z,1492143919.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:20.276Z,1492143920.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:20.645Z,1492143920.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:21.038Z,1492143921.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:21.437Z,1492143921.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:21.905Z,1492143921.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:22.228Z,1492143922.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:22.630Z,1492143922.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:23.031Z,1492143923.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:23.435Z,1492143923.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:23.939Z,1492143923.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:24.231Z,1492143924.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:24.634Z,1492143924.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:25.030Z,1492143925.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:25.430Z,1492143925.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:25.996Z,1492143925.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:26.223Z,1492143926.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:26.626Z,1492143926.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:27.068Z,1492143927.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:27.461Z,1492143927.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:27.963Z,1492143927.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:28.249Z,1492143928.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:28.660Z,1492143928.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:29.030Z,1492143929.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:29.491Z,1492143929.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:29.947Z,1492143929.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:30.229Z,1492143930.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:30.677Z,1492143930.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:31.030Z,1492143931.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:31.467Z,1492143931.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:31.834Z,1492143931.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:32.284Z,1492143932.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:32.677Z,1492143932.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:33.041Z,1492143933.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:33.453Z,1492143933.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:33.854Z,1492143933.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:34.303Z,1492143934.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:34.652Z,1492143934.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:35.112Z,1492143935.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:35.438Z,1492143935.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:35.917Z,1492143935.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:36.234Z,1492143936.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:36.665Z,1492143936.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:37.030Z,1492143937.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:37.046Z,1492143937.046 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:37.046Z,1492143937.046 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:25:37.046Z,1492143937.046 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:25:37.078Z,1492143937.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:25:37.428Z,1492143937.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:37.481Z,1492143937.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:25:37.481Z,1492143937.481 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:25:37.932Z,1492143937.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:37.938Z,1492143937.938 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:25:37.938Z,1492143937.938 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:25:37.939Z,1492143937.939 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:25:38.227Z,1492143938.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:38.639Z,1492143938.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:39.039Z,1492143939.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:39.441Z,1492143939.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:39.923Z,1492143939.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:40.246Z,1492143940.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:40.638Z,1492143940.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:41.089Z,1492143941.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:41.466Z,1492143941.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:41.911Z,1492143941.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:42.304Z,1492143942.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:42.656Z,1492143942.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:43.034Z,1492143943.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:43.483Z,1492143943.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:43.942Z,1492143943.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:44.337Z,1492143944.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:44.703Z,1492143944.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:45.114Z,1492143945.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:45.470Z,1492143945.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:45.985Z,1492143945.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:46.364Z,1492143946.364 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:46.364Z,1492143946.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:25:46.365Z,1492143946.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:25:46.389Z,1492143946.389 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:46.389Z,1492143946.389 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:25:46.389Z,1492143946.389 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:25:46.438Z,1492143946.438 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:25:46.438Z,1492143946.438 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:25:46.854Z,1492143946.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:25:46.854Z,1492143946.854 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:25:46.855Z,1492143946.855 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:25:46.863Z,1492143946.863 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:25:47.073Z,1492143947.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:25:47.074Z,1492143947.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:25:47.074Z,1492143947.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:25:47.086Z,1492143947.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:25:47.086Z,1492143947.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:25:47.086Z,1492143947.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:25:47.481Z,1492143947.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:47.846Z,1492143947.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:48.284Z,1492143948.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:48.682Z,1492143948.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:49.053Z,1492143949.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:49.492Z,1492143949.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:49.941Z,1492143949.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:50.269Z,1492143950.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:50.672Z,1492143950.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:51.050Z,1492143951.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:51.448Z,1492143951.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:51.948Z,1492143951.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:52.290Z,1492143952.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:52.658Z,1492143952.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:53.050Z,1492143953.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:53.467Z,1492143953.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:53.894Z,1492143953.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:54.251Z,1492143954.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:54.672Z,1492143954.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:55.069Z,1492143955.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:55.472Z,1492143955.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:55.919Z,1492143955.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:56.282Z,1492143956.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:56.722Z,1492143956.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:57.081Z,1492143957.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:57.120Z,1492143957.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:25:57.468Z,1492143957.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:57.916Z,1492143957.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:25:58.050Z,1492143958.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:58.289Z,1492143958.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:58.404Z,1492143958.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:25:58.718Z,1492143958.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:59.073Z,1492143959.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:59.481Z,1492143959.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:25:59.883Z,1492143959.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:00.277Z,1492143960.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:00.580Z,1492143960.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:26:00.684Z,1492143960.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:01.084Z,1492143961.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:01.376Z,1492143961.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:26:01.476Z,1492143961.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:01.877Z,1492143961.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:02.278Z,1492143962.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:02.674Z,1492143962.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:03.056Z,1492143963.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:03.491Z,1492143963.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:03.897Z,1492143963.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:04.263Z,1492143964.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:04.670Z,1492143964.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:05.072Z,1492143965.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:05.468Z,1492143965.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:05.909Z,1492143965.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:09.971Z,1492143969.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:10.117Z,1492143970.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:10.452Z,1492143970.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:10.852Z,1492143970.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:11.281Z,1492143971.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:11.683Z,1492143971.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:12.062Z,1492143972.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:12.491Z,1492143972.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:12.894Z,1492143972.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:13.289Z,1492143973.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:13.656Z,1492143973.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:14.139Z,1492143974.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:14.463Z,1492143974.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:14.888Z,1492143974.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:15.297Z,1492143975.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:15.645Z,1492143975.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:16.045Z,1492143976.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:16.454Z,1492143976.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:16.862Z,1492143976.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:17.254Z,1492143977.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:17.662Z,1492143977.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:18.051Z,1492143978.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:18.452Z,1492143978.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:18.890Z,1492143978.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:19.263Z,1492143979.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:19.699Z,1492143979.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:20.093Z,1492143980.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:20.470Z,1492143980.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:20.850Z,1492143980.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:21.260Z,1492143981.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:21.662Z,1492143981.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:22.071Z,1492143982.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:22.463Z,1492143982.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:22.862Z,1492143982.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:23.272Z,1492143983.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:23.667Z,1492143983.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:24.066Z,1492143984.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:24.470Z,1492143984.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:24.980Z,1492143984.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:25.279Z,1492143985.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:25.719Z,1492143985.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:26.134Z,1492143986.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:26.477Z,1492143986.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:26.882Z,1492143986.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:27.361Z,1492143987.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:27.676Z,1492143987.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:28.141Z,1492143988.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:28.550Z,1492143988.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:28.891Z,1492143988.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:29.290Z,1492143989.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:29.729Z,1492143989.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:30.210Z,1492143990.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:30.529Z,1492143990.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:30.915Z,1492143990.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:31.264Z,1492143991.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:31.682Z,1492143991.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:32.117Z,1492143992.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:32.462Z,1492143992.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:32.864Z,1492143992.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:33.247Z,1492143993.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:33.773Z,1492143993.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:34.075Z,1492143994.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:34.501Z,1492143994.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:34.857Z,1492143994.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:35.255Z,1492143995.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:35.652Z,1492143995.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:36.070Z,1492143996.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:36.473Z,1492143996.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:36.868Z,1492143996.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:37.268Z,1492143997.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:37.669Z,1492143997.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:38.061Z,1492143998.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:38.462Z,1492143998.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:38.900Z,1492143998.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:39.283Z,1492143999.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:39.688Z,1492143999.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:40.054Z,1492144000.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:40.455Z,1492144000.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:40.851Z,1492144000.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:41.250Z,1492144001.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:41.654Z,1492144001.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:42.214Z,1492144002.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:42.446Z,1492144002.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:42.902Z,1492144002.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:43.257Z,1492144003.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:43.698Z,1492144003.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:44.139Z,1492144004.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:44.451Z,1492144004.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:44.850Z,1492144004.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:45.279Z,1492144005.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:45.650Z,1492144005.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:46.053Z,1492144006.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:46.497Z,1492144006.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:46.887Z,1492144006.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:47.288Z,1492144007.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:47.663Z,1492144007.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:48.090Z,1492144008.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:48.471Z,1492144008.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:48.850Z,1492144008.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:49.243Z,1492144009.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:49.649Z,1492144009.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:50.058Z,1492144010.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:50.468Z,1492144010.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:50.868Z,1492144010.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:51.260Z,1492144011.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:51.658Z,1492144011.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:52.062Z,1492144012.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:52.485Z,1492144012.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:52.869Z,1492144012.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:53.259Z,1492144013.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:53.654Z,1492144013.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:54.060Z,1492144014.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:54.451Z,1492144014.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:54.858Z,1492144014.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:55.254Z,1492144015.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:55.651Z,1492144015.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:56.202Z,1492144016.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:56.445Z,1492144016.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:56.846Z,1492144016.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:57.278Z,1492144017.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:57.648Z,1492144017.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:58.140Z,1492144018.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:58.498Z,1492144018.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:58.859Z,1492144018.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:59.252Z,1492144019.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:26:59.857Z,1492144019.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:00.052Z,1492144020.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:00.476Z,1492144020.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:00.888Z,1492144020.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:01.248Z,1492144021.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:01.694Z,1492144021.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:02.056Z,1492144022.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:02.456Z,1492144022.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:02.857Z,1492144022.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:03.234Z,1492144023.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:03.640Z,1492144023.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:04.061Z,1492144024.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:04.450Z,1492144024.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:04.857Z,1492144024.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:05.252Z,1492144025.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:05.728Z,1492144025.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:06.057Z,1492144026.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:11.675Z,1492144031.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:11.805Z,1492144031.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:12.206Z,1492144032.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:12.600Z,1492144032.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:13.054Z,1492144033.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:13.417Z,1492144033.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:13.881Z,1492144033.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:14.205Z,1492144034.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:14.650Z,1492144034.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:15.035Z,1492144035.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:15.395Z,1492144035.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:15.953Z,1492144035.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:16.211Z,1492144036.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:16.635Z,1492144036.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:17.003Z,1492144037.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:17.410Z,1492144037.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:17.803Z,1492144037.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:18.195Z,1492144038.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:18.602Z,1492144038.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:19.047Z,1492144039.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:19.408Z,1492144039.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:19.809Z,1492144039.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:20.182Z,1492144040.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:20.585Z,1492144040.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:20.984Z,1492144040.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:21.374Z,1492144041.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:21.871Z,1492144041.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:22.181Z,1492144042.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:22.578Z,1492144042.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:22.985Z,1492144042.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:23.386Z,1492144043.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:23.784Z,1492144043.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:24.182Z,1492144044.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:24.444Z,1492144044.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:27:24.586Z,1492144044.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:24.984Z,1492144044.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:25.240Z,1492144045.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:27:25.428Z,1492144045.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:25.882Z,1492144045.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:26.240Z,1492144046.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:26.624Z,1492144046.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:27.038Z,1492144047.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:27.391Z,1492144047.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:27.802Z,1492144047.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:28.222Z,1492144048.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:28.607Z,1492144048.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:28.986Z,1492144048.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:29.395Z,1492144049.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:29.834Z,1492144049.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:30.196Z,1492144050.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:30.638Z,1492144050.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:30.993Z,1492144050.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:31.374Z,1492144051.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:31.834Z,1492144051.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:32.214Z,1492144052.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:32.630Z,1492144052.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:33.053Z,1492144053.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:33.423Z,1492144053.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:33.852Z,1492144053.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:34.320Z,1492144054.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:34.613Z,1492144054.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:35.027Z,1492144055.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:35.430Z,1492144055.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:35.836Z,1492144055.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:36.190Z,1492144056.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:36.618Z,1492144056.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:37.006Z,1492144057.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:37.390Z,1492144057.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:37.862Z,1492144057.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:38.245Z,1492144058.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:38.641Z,1492144058.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:39.028Z,1492144059.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:39.418Z,1492144059.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:39.790Z,1492144059.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:40.281Z,1492144060.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:40.588Z,1492144060.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:41.003Z,1492144061.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:41.414Z,1492144061.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:41.808Z,1492144061.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:42.231Z,1492144062.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:42.610Z,1492144062.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:43.008Z,1492144063.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:43.394Z,1492144063.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:43.798Z,1492144063.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:44.182Z,1492144064.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:44.663Z,1492144064.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:45.018Z,1492144065.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:45.426Z,1492144065.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:45.790Z,1492144065.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:46.226Z,1492144066.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:46.595Z,1492144066.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:47.027Z,1492144067.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:47.394Z,1492144067.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:47.818Z,1492144067.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:48.195Z,1492144068.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:48.579Z,1492144068.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:49.026Z,1492144069.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:49.379Z,1492144069.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:49.812Z,1492144069.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:50.213Z,1492144070.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:50.591Z,1492144070.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:50.988Z,1492144070.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:51.382Z,1492144071.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:51.786Z,1492144071.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:52.196Z,1492144072.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:52.584Z,1492144072.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:52.986Z,1492144072.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:53.392Z,1492144073.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:53.784Z,1492144073.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:54.210Z,1492144074.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:54.618Z,1492144074.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:54.986Z,1492144074.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:55.435Z,1492144075.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:55.789Z,1492144075.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:56.218Z,1492144076.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:56.620Z,1492144076.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:56.973Z,1492144076.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:57.397Z,1492144077.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:57.803Z,1492144077.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:58.198Z,1492144078.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:58.584Z,1492144078.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:58.980Z,1492144078.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:59.382Z,1492144079.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:27:59.786Z,1492144079.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:00.190Z,1492144080.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:00.582Z,1492144080.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:00.992Z,1492144080.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:01.386Z,1492144081.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:01.781Z,1492144081.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:02.188Z,1492144082.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:02.589Z,1492144082.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:02.993Z,1492144082.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:03.414Z,1492144083.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:03.777Z,1492144083.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:04.178Z,1492144084.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:04.603Z,1492144084.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:04.986Z,1492144084.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:05.386Z,1492144085.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:05.394Z,1492144085.394 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:28:05.394Z,1492144085.394 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:28:05.394Z,1492144085.394 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:28:05.394Z,1492144085.395 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:28:05.797Z,1492144085.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:05.830Z,1492144085.830 [Default:CheckIn:D] Stopped
2017-04-14T04:28:05.830Z,1492144085.830 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:28:06.184Z,1492144086.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:06.227Z,1492144086.227 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 62.008516 min 
2017-04-14T04:28:06.231Z,1492144086.231 [Default:CheckIn:E] Stopped
2017-04-14T04:28:06.231Z,1492144086.231 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:28:06.231Z,1492144086.231 [Default:CheckIn] Stopped
2017-04-14T04:28:06.232Z,1492144086.232 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:28:06.232Z,1492144086.232 [Default:CheckIn](INFO): Running loop #10
2017-04-14T04:28:06.232Z,1492144086.232 [Default:CheckIn] Running Loop=10
2017-04-14T04:28:06.232Z,1492144086.232 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:28:06.232Z,1492144086.232 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:28:09.905Z,1492144089.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:09.979Z,1492144089.980 [NAL9602](INFO): Powering up
2017-04-14T04:28:10.035Z,1492144090.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:10.438Z,1492144090.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:10.805Z,1492144090.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:11.253Z,1492144091.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:11.695Z,1492144091.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:12.034Z,1492144092.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:12.410Z,1492144092.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:12.810Z,1492144092.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:13.210Z,1492144093.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:13.704Z,1492144093.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:14.047Z,1492144094.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:14.410Z,1492144094.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:14.817Z,1492144094.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:15.217Z,1492144095.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:15.715Z,1492144095.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:16.060Z,1492144096.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:16.464Z,1492144096.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:16.817Z,1492144096.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:17.228Z,1492144097.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:17.661Z,1492144097.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:18.022Z,1492144098.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:18.406Z,1492144098.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:18.814Z,1492144098.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:19.218Z,1492144099.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:19.617Z,1492144099.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:20.062Z,1492144100.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:20.428Z,1492144100.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:20.826Z,1492144100.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:21.173Z,1492144101.173 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:28:21.225Z,1492144101.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:21.630Z,1492144101.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:22.026Z,1492144102.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:22.435Z,1492144102.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:22.834Z,1492144102.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:23.206Z,1492144103.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:23.736Z,1492144103.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:24.070Z,1492144104.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:24.407Z,1492144104.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:24.859Z,1492144104.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:25.262Z,1492144105.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:25.663Z,1492144105.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:26.061Z,1492144106.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:26.449Z,1492144106.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:26.817Z,1492144106.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:27.213Z,1492144107.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:27.666Z,1492144107.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:28.029Z,1492144108.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:28.420Z,1492144108.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:28.815Z,1492144108.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:29.206Z,1492144109.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:29.668Z,1492144109.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:30.020Z,1492144110.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:30.432Z,1492144110.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:30.808Z,1492144110.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:31.228Z,1492144111.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:31.677Z,1492144111.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:32.024Z,1492144112.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:32.442Z,1492144112.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:32.837Z,1492144112.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:33.218Z,1492144113.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:33.639Z,1492144113.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:34.007Z,1492144114.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:34.422Z,1492144114.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:34.818Z,1492144114.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:35.261Z,1492144115.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:35.630Z,1492144115.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:36.055Z,1492144116.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:36.438Z,1492144116.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:36.834Z,1492144116.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:37.245Z,1492144117.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:37.711Z,1492144117.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:38.050Z,1492144118.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:38.081Z,1492144118.081 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:38.082Z,1492144118.082 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:28:38.082Z,1492144118.082 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:28:38.139Z,1492144118.139 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:28:38.438Z,1492144118.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:38.475Z,1492144118.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:28:38.479Z,1492144118.479 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:28:38.866Z,1492144118.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:38.880Z,1492144118.880 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:28:38.881Z,1492144118.881 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:28:38.881Z,1492144118.881 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:28:39.230Z,1492144119.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:39.733Z,1492144119.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:40.049Z,1492144120.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:40.462Z,1492144120.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:40.840Z,1492144120.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:41.207Z,1492144121.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:41.662Z,1492144121.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:42.038Z,1492144122.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:42.406Z,1492144122.406 [PNI_TCM](ERROR): CRC does not match. Expected:0x65297 got:0x49278
2017-04-14T04:28:42.446Z,1492144122.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:42.766Z,1492144122.766 [NAL9602](INFO): SBD MO Status=0, MOMSN=2103, MT Status=0, MTMSN=0
2017-04-14T04:28:42.766Z,1492144122.766 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:28:42.814Z,1492144122.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:43.224Z,1492144123.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:43.662Z,1492144123.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:44.038Z,1492144124.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:44.425Z,1492144124.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:44.833Z,1492144124.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:45.225Z,1492144125.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:45.696Z,1492144125.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:46.032Z,1492144126.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:46.450Z,1492144126.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:46.814Z,1492144126.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:47.212Z,1492144127.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:47.212Z,1492144127.212 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:28:47.212Z,1492144127.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:28:47.218Z,1492144127.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:47.218Z,1492144127.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:28:47.218Z,1492144127.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:28:47.257Z,1492144127.257 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:28:47.257Z,1492144127.257 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:28:47.658Z,1492144127.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:28:47.658Z,1492144127.658 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:28:47.659Z,1492144127.659 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:28:47.659Z,1492144127.659 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:28:48.015Z,1492144128.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:28:48.016Z,1492144128.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:28:48.016Z,1492144128.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:28:48.021Z,1492144128.021 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:28:48.021Z,1492144128.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:28:48.022Z,1492144128.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:28:48.419Z,1492144128.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:48.818Z,1492144128.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:49.227Z,1492144129.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:49.577Z,1492144129.577 [NAL9602](INFO): GPS fix at 20170414T042854: (36.802351, -121.787141)
2017-04-14T04:28:49.685Z,1492144129.685 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:28:49.685Z,1492144129.685 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:28:50.042Z,1492144130.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:50.042Z,1492144130.042 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:28:50.042Z,1492144130.042 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:28:50.049Z,1492144130.049 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:50.050Z,1492144130.050 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:28:50.050Z,1492144130.050 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:28:50.097Z,1492144130.097 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:28:50.097Z,1492144130.098 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:28:50.701Z,1492144130.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:28:50.701Z,1492144130.701 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:28:50.702Z,1492144130.702 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:28:50.702Z,1492144130.702 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:28:51.021Z,1492144131.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:28:51.021Z,1492144131.021 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:28:51.021Z,1492144131.021 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:28:51.027Z,1492144131.027 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:28:51.027Z,1492144131.027 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:28:51.028Z,1492144131.028 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:28:55.308Z,1492144135.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:55.398Z,1492144135.398 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0044.lzma
2017-04-14T04:28:55.577Z,1492144135.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:55.836Z,1492144135.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:56.318Z,1492144136.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:57.161Z,1492144137.161 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0044.lzma.bak
2017-04-14T04:28:57.161Z,1492144137.161 [DataOverHttps](INFO): SBD MOMSN=4885150
2017-04-14T04:28:57.232Z,1492144137.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:57.403Z,1492144137.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:28:57.736Z,1492144137.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:01.424Z,1492144141.424 [NAL9602](INFO): Powering down
2017-04-14T04:29:01.495Z,1492144141.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:01.628Z,1492144141.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:01.996Z,1492144141.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:02.406Z,1492144142.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:02.798Z,1492144142.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:03.218Z,1492144143.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:07.089Z,1492144147.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:07.162Z,1492144147.162 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0045.lzma
2017-04-14T04:29:07.270Z,1492144147.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:07.646Z,1492144147.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:07.963Z,1492144147.963 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0045.lzma.bak
2017-04-14T04:29:07.964Z,1492144147.964 [DataOverHttps](INFO): SBD MOMSN=4885153
2017-04-14T04:29:08.062Z,1492144148.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:08.426Z,1492144148.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:08.437Z,1492144148.437 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:29:08.437Z,1492144148.437 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:29:08.437Z,1492144148.437 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:29:08.814Z,1492144148.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:13.045Z,1492144153.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:13.215Z,1492144153.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:13.632Z,1492144153.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:14.014Z,1492144154.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:14.387Z,1492144154.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:14.822Z,1492144154.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:15.225Z,1492144155.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:15.642Z,1492144155.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:16.016Z,1492144156.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:16.401Z,1492144156.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:16.850Z,1492144156.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:17.203Z,1492144157.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:17.583Z,1492144157.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:18.017Z,1492144158.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:18.458Z,1492144158.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:18.788Z,1492144158.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:19.225Z,1492144159.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:19.621Z,1492144159.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:20.001Z,1492144160.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:20.423Z,1492144160.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:20.784Z,1492144160.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:21.182Z,1492144161.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:21.585Z,1492144161.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:21.997Z,1492144161.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:22.383Z,1492144162.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:22.770Z,1492144162.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:23.198Z,1492144163.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:23.580Z,1492144163.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:23.979Z,1492144163.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:24.409Z,1492144164.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:24.805Z,1492144164.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:25.187Z,1492144165.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:25.594Z,1492144165.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:26.041Z,1492144166.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:26.399Z,1492144166.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:26.791Z,1492144166.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:27.270Z,1492144167.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:27.743Z,1492144167.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:28.013Z,1492144168.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:28.403Z,1492144168.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:28.863Z,1492144168.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:29.226Z,1492144169.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:29.710Z,1492144169.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:30.159Z,1492144170.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:30.455Z,1492144170.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:30.865Z,1492144170.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:31.223Z,1492144171.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:31.595Z,1492144171.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:31.998Z,1492144171.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:32.384Z,1492144172.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:32.799Z,1492144172.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:33.189Z,1492144173.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:33.591Z,1492144173.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:33.987Z,1492144173.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:34.390Z,1492144174.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:34.797Z,1492144174.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:35.199Z,1492144175.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:35.589Z,1492144175.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:36.003Z,1492144176.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:36.389Z,1492144176.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:36.804Z,1492144176.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:37.188Z,1492144177.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:37.592Z,1492144177.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:38.010Z,1492144178.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:38.402Z,1492144178.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:38.839Z,1492144178.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:39.189Z,1492144179.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:39.629Z,1492144179.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:39.990Z,1492144179.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:40.394Z,1492144180.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:40.837Z,1492144180.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:41.194Z,1492144181.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:41.606Z,1492144181.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:42.066Z,1492144182.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:42.410Z,1492144182.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:42.761Z,1492144182.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:29:42.803Z,1492144182.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:43.222Z,1492144183.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:43.558Z,1492144183.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:29:43.613Z,1492144183.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:44.023Z,1492144184.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:44.454Z,1492144184.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:44.786Z,1492144184.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:45.210Z,1492144185.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:45.598Z,1492144185.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:45.984Z,1492144185.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:46.416Z,1492144186.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:46.826Z,1492144186.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:47.198Z,1492144187.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:47.586Z,1492144187.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:47.995Z,1492144187.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:48.390Z,1492144188.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:48.787Z,1492144188.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:49.206Z,1492144189.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:49.599Z,1492144189.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:50.009Z,1492144190.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:50.395Z,1492144190.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:50.819Z,1492144190.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:51.170Z,1492144191.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:51.606Z,1492144191.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:52.013Z,1492144192.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:52.400Z,1492144192.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:52.800Z,1492144192.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:53.197Z,1492144193.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:53.600Z,1492144193.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:53.998Z,1492144193.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:54.382Z,1492144194.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:54.788Z,1492144194.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:55.195Z,1492144195.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:55.732Z,1492144195.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:56.026Z,1492144196.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:56.535Z,1492144196.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:56.770Z,1492144196.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:57.189Z,1492144197.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:57.762Z,1492144197.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:58.036Z,1492144198.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:58.442Z,1492144198.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:58.819Z,1492144198.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:59.192Z,1492144199.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:29:59.600Z,1492144199.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:00.006Z,1492144200.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:00.386Z,1492144200.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:00.784Z,1492144200.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:01.190Z,1492144201.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:01.584Z,1492144201.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:02.032Z,1492144202.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:02.426Z,1492144202.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:02.788Z,1492144202.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:03.218Z,1492144203.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:03.596Z,1492144203.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:04.062Z,1492144204.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:04.384Z,1492144204.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:04.778Z,1492144204.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:05.217Z,1492144205.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:05.584Z,1492144205.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:05.993Z,1492144205.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:06.390Z,1492144206.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:06.793Z,1492144206.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:07.186Z,1492144207.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:07.593Z,1492144207.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:07.993Z,1492144207.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:08.394Z,1492144208.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:08.798Z,1492144208.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:09.191Z,1492144209.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:12.811Z,1492144212.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:12.967Z,1492144212.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:13.326Z,1492144213.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:13.819Z,1492144213.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:14.128Z,1492144214.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:14.561Z,1492144214.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:14.957Z,1492144214.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:15.322Z,1492144215.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:15.748Z,1492144215.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:16.133Z,1492144216.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:16.544Z,1492144216.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:16.997Z,1492144216.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:17.312Z,1492144217.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:17.741Z,1492144217.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:18.139Z,1492144218.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:18.530Z,1492144218.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:18.913Z,1492144218.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:19.385Z,1492144219.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:19.716Z,1492144219.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:20.123Z,1492144220.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:20.533Z,1492144220.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:20.920Z,1492144220.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:21.322Z,1492144221.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:21.748Z,1492144221.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:22.122Z,1492144222.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:22.526Z,1492144222.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:22.933Z,1492144222.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:23.329Z,1492144223.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:23.729Z,1492144223.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:24.125Z,1492144224.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:24.527Z,1492144224.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:24.932Z,1492144224.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:25.344Z,1492144225.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:25.822Z,1492144225.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:26.129Z,1492144226.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:26.532Z,1492144226.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:26.944Z,1492144226.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:27.380Z,1492144227.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:27.887Z,1492144227.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:28.155Z,1492144228.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:28.525Z,1492144228.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:28.954Z,1492144228.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:29.393Z,1492144229.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:29.723Z,1492144229.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:30.146Z,1492144230.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:30.532Z,1492144230.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:30.926Z,1492144230.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:31.349Z,1492144231.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:31.737Z,1492144231.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:32.166Z,1492144232.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:32.540Z,1492144232.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:32.979Z,1492144232.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:33.320Z,1492144233.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:33.750Z,1492144233.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:34.152Z,1492144234.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:34.552Z,1492144234.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:34.983Z,1492144234.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:35.390Z,1492144235.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:35.718Z,1492144235.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:36.157Z,1492144236.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:36.575Z,1492144236.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:36.954Z,1492144236.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:37.341Z,1492144237.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:37.793Z,1492144237.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:38.193Z,1492144238.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:38.561Z,1492144238.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:38.926Z,1492144238.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:39.329Z,1492144239.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:39.780Z,1492144239.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:40.138Z,1492144240.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:40.538Z,1492144240.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:40.927Z,1492144240.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:41.386Z,1492144241.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:41.812Z,1492144241.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:42.128Z,1492144242.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:42.559Z,1492144242.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:42.918Z,1492144242.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:43.417Z,1492144243.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:43.756Z,1492144243.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:44.126Z,1492144244.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:44.522Z,1492144244.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:44.934Z,1492144244.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:45.417Z,1492144245.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:45.731Z,1492144245.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:46.115Z,1492144246.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:46.530Z,1492144246.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:46.923Z,1492144246.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:47.402Z,1492144247.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:47.714Z,1492144247.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:48.112Z,1492144248.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:48.523Z,1492144248.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:48.921Z,1492144248.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:49.397Z,1492144249.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:49.729Z,1492144249.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:50.130Z,1492144250.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:50.528Z,1492144250.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:50.938Z,1492144250.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:51.329Z,1492144251.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:51.726Z,1492144251.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:52.142Z,1492144252.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:52.529Z,1492144252.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:52.936Z,1492144252.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:53.338Z,1492144253.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:53.788Z,1492144253.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:54.118Z,1492144254.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:54.176Z,1492144254.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:30:54.541Z,1492144254.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:54.914Z,1492144254.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:54.974Z,1492144254.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:30:55.344Z,1492144255.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:55.799Z,1492144255.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:56.182Z,1492144256.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:56.522Z,1492144256.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:56.923Z,1492144256.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:57.437Z,1492144257.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:57.716Z,1492144257.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:58.166Z,1492144258.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:58.555Z,1492144258.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:58.928Z,1492144258.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:59.405Z,1492144259.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:30:59.755Z,1492144259.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:00.154Z,1492144260.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:00.521Z,1492144260.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:00.920Z,1492144260.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:01.388Z,1492144261.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:01.777Z,1492144261.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:02.139Z,1492144262.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:02.528Z,1492144262.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:02.948Z,1492144262.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:03.412Z,1492144263.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:03.733Z,1492144263.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:04.133Z,1492144264.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:04.524Z,1492144264.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:04.933Z,1492144264.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:05.410Z,1492144265.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:05.721Z,1492144265.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:06.115Z,1492144266.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:06.523Z,1492144266.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:06.936Z,1492144266.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:07.340Z,1492144267.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:07.754Z,1492144267.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:08.137Z,1492144268.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:08.521Z,1492144268.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:08.925Z,1492144268.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:09.322Z,1492144269.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:13.178Z,1492144273.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:13.367Z,1492144273.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:13.744Z,1492144273.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:14.130Z,1492144274.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:14.492Z,1492144274.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:14.962Z,1492144274.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:15.386Z,1492144275.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:15.769Z,1492144275.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:16.130Z,1492144276.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:16.521Z,1492144276.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:17.020Z,1492144277.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:17.414Z,1492144277.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:17.718Z,1492144277.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:18.150Z,1492144278.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:18.523Z,1492144278.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:18.886Z,1492144278.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:19.277Z,1492144279.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:19.691Z,1492144279.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:20.096Z,1492144280.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:20.489Z,1492144280.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:20.899Z,1492144280.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:21.294Z,1492144281.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:21.714Z,1492144281.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:22.094Z,1492144282.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:22.509Z,1492144282.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:22.924Z,1492144282.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:23.287Z,1492144283.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:23.817Z,1492144283.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:24.098Z,1492144284.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:24.501Z,1492144284.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:24.910Z,1492144284.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:25.414Z,1492144285.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:25.735Z,1492144285.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:26.097Z,1492144286.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:26.506Z,1492144286.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:26.892Z,1492144286.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:27.395Z,1492144287.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:27.821Z,1492144287.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:28.248Z,1492144288.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:28.514Z,1492144288.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:28.916Z,1492144288.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:29.467Z,1492144289.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:29.714Z,1492144289.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:30.139Z,1492144290.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:30.590Z,1492144290.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:31.001Z,1492144291.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:31.445Z,1492144291.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:31.705Z,1492144291.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:32.129Z,1492144292.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:32.493Z,1492144292.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:32.892Z,1492144292.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:33.353Z,1492144293.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:33.680Z,1492144293.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:34.087Z,1492144294.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:34.599Z,1492144294.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:34.935Z,1492144294.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:35.331Z,1492144295.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:35.704Z,1492144295.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:36.089Z,1492144296.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:36.543Z,1492144296.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:36.881Z,1492144296.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:37.283Z,1492144297.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:37.749Z,1492144297.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:38.084Z,1492144298.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:38.483Z,1492144298.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:38.890Z,1492144298.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:38.897Z,1492144298.897 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:38.897Z,1492144298.897 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:31:38.897Z,1492144298.897 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:31:38.927Z,1492144298.927 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:31:39.361Z,1492144299.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:39.419Z,1492144299.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:31:39.420Z,1492144299.420 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:31:39.713Z,1492144299.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:39.727Z,1492144299.727 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:31:39.743Z,1492144299.743 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:31:39.744Z,1492144299.744 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:31:40.134Z,1492144300.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:40.487Z,1492144300.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:40.884Z,1492144300.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:41.360Z,1492144301.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:41.674Z,1492144301.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:42.107Z,1492144302.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:42.542Z,1492144302.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:42.890Z,1492144302.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:43.344Z,1492144303.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:43.685Z,1492144303.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:44.089Z,1492144304.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:44.489Z,1492144304.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:44.892Z,1492144304.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:45.348Z,1492144305.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:45.673Z,1492144305.673 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:31:45.673Z,1492144305.673 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:31:45.673Z,1492144305.673 [BPC1](ERROR): Communications Fault
2017-04-14T04:31:45.682Z,1492144305.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:45.733Z,1492144305.733 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:31:46.080Z,1492144306.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:46.479Z,1492144306.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:46.893Z,1492144306.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:46.920Z,1492144306.920 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:31:46.920Z,1492144306.920 [BPC1] No Fault, FailCount= 1
2017-04-14T04:31:47.414Z,1492144307.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:47.690Z,1492144307.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:48.108Z,1492144308.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:48.497Z,1492144308.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:48.893Z,1492144308.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:49.292Z,1492144309.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:49.769Z,1492144309.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:50.115Z,1492144310.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:50.505Z,1492144310.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:50.949Z,1492144310.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:51.352Z,1492144311.352 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:51.352Z,1492144311.352 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:31:51.352Z,1492144311.352 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:31:51.358Z,1492144311.358 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:51.359Z,1492144311.359 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:31:51.359Z,1492144311.359 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:31:51.433Z,1492144311.433 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:31:51.433Z,1492144311.433 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:31:51.815Z,1492144311.815 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:31:51.815Z,1492144311.815 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:31:51.816Z,1492144311.816 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:31:51.816Z,1492144311.816 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:31:52.152Z,1492144312.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:31:52.153Z,1492144312.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:31:52.153Z,1492144312.153 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:31:52.170Z,1492144312.170 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:31:52.170Z,1492144312.170 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:31:52.171Z,1492144312.171 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:31:52.544Z,1492144312.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:52.962Z,1492144312.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:53.425Z,1492144313.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:53.725Z,1492144313.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:54.082Z,1492144314.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:54.518Z,1492144314.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:54.940Z,1492144314.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:55.352Z,1492144315.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:55.711Z,1492144315.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:56.083Z,1492144316.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:56.558Z,1492144316.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:56.892Z,1492144316.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:57.335Z,1492144317.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:57.698Z,1492144317.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:58.088Z,1492144318.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:58.491Z,1492144318.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:58.899Z,1492144318.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:59.350Z,1492144319.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:31:59.697Z,1492144319.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:00.106Z,1492144320.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:00.480Z,1492144320.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:00.877Z,1492144320.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:01.358Z,1492144321.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:01.711Z,1492144321.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:02.085Z,1492144322.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:02.490Z,1492144322.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:02.916Z,1492144322.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:03.286Z,1492144323.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:03.693Z,1492144323.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:04.091Z,1492144324.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:04.486Z,1492144324.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:04.902Z,1492144324.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:05.289Z,1492144325.289 [BPC1](ERROR): Failed to parse message.
2017-04-14T04:32:05.290Z,1492144325.290 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T04:32:05.290Z,1492144325.290 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:32:05.290Z,1492144325.290 [BPC1](ERROR): Data Fault
2017-04-14T04:32:05.299Z,1492144325.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:05.361Z,1492144325.361 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:32:05.694Z,1492144325.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:06.090Z,1492144326.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:06.497Z,1492144326.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:06.532Z,1492144326.532 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:32:06.532Z,1492144326.532 [BPC1] No Fault, FailCount= 1
2017-04-14T04:32:06.938Z,1492144326.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:07.357Z,1492144327.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:07.737Z,1492144327.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:08.110Z,1492144328.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:08.499Z,1492144328.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:08.910Z,1492144328.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:09.352Z,1492144329.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:09.698Z,1492144329.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:14.822Z,1492144334.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:14.854Z,1492144334.854 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:32:14.968Z,1492144334.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:15.347Z,1492144335.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:15.718Z,1492144335.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:16.155Z,1492144336.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:16.515Z,1492144336.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:16.936Z,1492144336.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:17.310Z,1492144337.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:17.757Z,1492144337.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:18.157Z,1492144338.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:18.514Z,1492144338.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:18.917Z,1492144338.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:19.319Z,1492144339.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:19.714Z,1492144339.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:20.123Z,1492144340.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:20.518Z,1492144340.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:20.916Z,1492144340.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:21.313Z,1492144341.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:21.722Z,1492144341.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:22.117Z,1492144342.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:22.509Z,1492144342.509 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:32:22.509Z,1492144342.509 [BPC1] Communications Fault, FailCount= 2
2017-04-14T04:32:22.509Z,1492144342.509 [BPC1](ERROR): Communications Fault
2017-04-14T04:32:22.517Z,1492144342.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:22.537Z,1492144342.537 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:32:22.918Z,1492144342.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:23.318Z,1492144343.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:23.784Z,1492144343.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:23.842Z,1492144343.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:32:23.843Z,1492144343.843 [BPC1] No Fault, FailCount= 2
2017-04-14T04:32:24.182Z,1492144344.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:24.566Z,1492144344.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:24.924Z,1492144344.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:25.327Z,1492144345.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:25.716Z,1492144345.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:26.105Z,1492144346.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:26.510Z,1492144346.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:26.929Z,1492144346.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:27.338Z,1492144347.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:27.712Z,1492144347.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:28.122Z,1492144348.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:28.557Z,1492144348.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:28.921Z,1492144348.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:29.365Z,1492144349.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:29.726Z,1492144349.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:30.174Z,1492144350.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:30.539Z,1492144350.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:30.929Z,1492144350.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:31.309Z,1492144351.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:31.710Z,1492144351.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:32.135Z,1492144352.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:32.540Z,1492144352.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:32.938Z,1492144352.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:33.310Z,1492144353.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:33.743Z,1492144353.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:34.113Z,1492144354.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:34.522Z,1492144354.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:34.947Z,1492144354.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:35.369Z,1492144355.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:35.724Z,1492144355.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:36.153Z,1492144356.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:36.550Z,1492144356.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:36.918Z,1492144356.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:37.347Z,1492144357.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:37.746Z,1492144357.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:38.129Z,1492144358.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:38.516Z,1492144358.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:38.922Z,1492144358.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:39.355Z,1492144359.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:39.764Z,1492144359.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:40.138Z,1492144360.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:40.637Z,1492144360.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:40.991Z,1492144360.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:41.512Z,1492144361.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:41.768Z,1492144361.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:42.194Z,1492144362.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:42.531Z,1492144362.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:42.997Z,1492144362.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:43.452Z,1492144363.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:43.748Z,1492144363.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:44.141Z,1492144364.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:44.537Z,1492144364.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:44.944Z,1492144364.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:45.304Z,1492144365.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:45.794Z,1492144365.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:46.126Z,1492144366.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:46.568Z,1492144366.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:46.946Z,1492144366.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:47.325Z,1492144367.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:47.730Z,1492144367.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:48.215Z,1492144368.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:48.557Z,1492144368.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:48.953Z,1492144368.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:49.361Z,1492144369.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:49.718Z,1492144369.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:50.161Z,1492144370.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:50.555Z,1492144370.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:51.007Z,1492144371.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:51.420Z,1492144371.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:51.745Z,1492144371.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:52.184Z,1492144372.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:52.653Z,1492144372.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:52.000Z,1492144373.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:53.374Z,1492144373.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:53.750Z,1492144373.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:54.115Z,1492144374.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:54.619Z,1492144374.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:54.997Z,1492144374.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:55.402Z,1492144375.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:55.730Z,1492144375.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:56.153Z,1492144376.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:56.554Z,1492144376.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:56.968Z,1492144376.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:57.485Z,1492144377.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:57.813Z,1492144377.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:58.130Z,1492144378.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:58.514Z,1492144378.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:58.984Z,1492144378.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:59.375Z,1492144379.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:32:59.787Z,1492144379.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:00.156Z,1492144380.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:00.543Z,1492144380.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:00.938Z,1492144380.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:01.322Z,1492144381.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:01.790Z,1492144381.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:02.141Z,1492144382.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:02.577Z,1492144382.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:02.933Z,1492144382.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:03.350Z,1492144383.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:03.777Z,1492144383.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:04.163Z,1492144384.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:04.552Z,1492144384.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:04.941Z,1492144384.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:05.340Z,1492144385.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:05.746Z,1492144385.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:06.145Z,1492144386.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:06.516Z,1492144386.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:06.949Z,1492144386.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:07.318Z,1492144387.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:07.726Z,1492144387.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:08.121Z,1492144388.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:08.515Z,1492144388.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:08.951Z,1492144388.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:09.353Z,1492144389.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:09.723Z,1492144389.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:13.663Z,1492144393.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:13.854Z,1492144393.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:14.215Z,1492144394.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:14.675Z,1492144394.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:15.027Z,1492144395.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:15.682Z,1492144395.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:15.947Z,1492144395.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:16.366Z,1492144396.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:16.745Z,1492144396.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:17.186Z,1492144397.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:17.533Z,1492144397.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:17.920Z,1492144397.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:18.292Z,1492144398.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:18.688Z,1492144398.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:19.200Z,1492144399.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:19.474Z,1492144399.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:19.894Z,1492144399.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:20.285Z,1492144400.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:20.682Z,1492144400.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:21.190Z,1492144401.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:21.502Z,1492144401.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:21.888Z,1492144401.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:22.287Z,1492144402.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:22.692Z,1492144402.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:23.181Z,1492144403.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:23.491Z,1492144403.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:23.898Z,1492144403.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:24.290Z,1492144404.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:24.700Z,1492144404.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:25.088Z,1492144405.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:25.478Z,1492144405.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:25.881Z,1492144405.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:26.286Z,1492144406.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:26.416Z,1492144406.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:33:26.684Z,1492144406.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:27.081Z,1492144407.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:27.212Z,1492144407.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:33:27.584Z,1492144407.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:27.922Z,1492144407.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:28.282Z,1492144408.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:28.686Z,1492144408.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:29.122Z,1492144409.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:29.535Z,1492144409.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:29.931Z,1492144409.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:30.327Z,1492144410.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:30.697Z,1492144410.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:31.178Z,1492144411.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:31.554Z,1492144411.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:31.896Z,1492144411.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:32.292Z,1492144412.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:32.676Z,1492144412.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:33.166Z,1492144413.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:33.490Z,1492144413.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:33.883Z,1492144413.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:34.284Z,1492144414.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:34.689Z,1492144414.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:35.154Z,1492144415.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:35.483Z,1492144415.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:35.886Z,1492144415.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:36.284Z,1492144416.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:36.694Z,1492144416.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:37.183Z,1492144417.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:37.497Z,1492144417.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:37.879Z,1492144417.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:38.301Z,1492144418.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:38.700Z,1492144418.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:39.161Z,1492144419.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:39.478Z,1492144419.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:39.885Z,1492144419.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:40.294Z,1492144420.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:40.723Z,1492144420.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:41.096Z,1492144421.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:41.546Z,1492144421.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:41.894Z,1492144421.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:42.295Z,1492144422.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:42.688Z,1492144422.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:43.135Z,1492144423.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:43.541Z,1492144423.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:43.889Z,1492144423.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:44.286Z,1492144424.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:44.693Z,1492144424.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:45.183Z,1492144425.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:45.466Z,1492144425.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:45.898Z,1492144425.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:46.293Z,1492144426.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:46.669Z,1492144426.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:47.188Z,1492144427.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:47.498Z,1492144427.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:47.878Z,1492144427.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:48.280Z,1492144428.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:48.682Z,1492144428.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:49.171Z,1492144429.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:49.517Z,1492144429.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:49.887Z,1492144429.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:50.284Z,1492144430.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:50.680Z,1492144430.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:51.132Z,1492144431.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:51.490Z,1492144431.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:51.882Z,1492144431.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:52.289Z,1492144432.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:52.690Z,1492144432.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:53.162Z,1492144433.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:53.497Z,1492144433.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:53.884Z,1492144433.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:54.353Z,1492144434.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:54.681Z,1492144434.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:55.113Z,1492144435.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:55.516Z,1492144435.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:55.917Z,1492144435.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:56.318Z,1492144436.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:56.691Z,1492144436.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:57.090Z,1492144437.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:57.496Z,1492144437.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:57.884Z,1492144437.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:58.303Z,1492144438.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:58.670Z,1492144438.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:59.128Z,1492144439.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:59.510Z,1492144439.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:33:59.878Z,1492144439.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:00.293Z,1492144440.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:00.739Z,1492144440.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:01.186Z,1492144441.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:01.528Z,1492144441.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:01.910Z,1492144441.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:02.278Z,1492144442.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:02.707Z,1492144442.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:03.148Z,1492144443.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:03.514Z,1492144443.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:03.907Z,1492144443.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:04.285Z,1492144444.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:04.689Z,1492144444.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:05.102Z,1492144445.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:05.494Z,1492144445.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:05.901Z,1492144445.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:06.314Z,1492144446.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:06.721Z,1492144446.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:07.210Z,1492144447.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:07.502Z,1492144447.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:07.890Z,1492144447.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:08.315Z,1492144448.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:08.695Z,1492144448.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:09.127Z,1492144449.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:09.136Z,1492144449.136 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:34:09.136Z,1492144449.136 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:34:09.136Z,1492144449.136 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:34:09.136Z,1492144449.136 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:34:09.551Z,1492144449.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:09.560Z,1492144449.560 [Default:CheckIn:D] Stopped
2017-04-14T04:34:09.560Z,1492144449.560 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:34:09.901Z,1492144449.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:09.912Z,1492144449.912 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 68.070691 min 
2017-04-14T04:34:09.912Z,1492144449.912 [Default:CheckIn:E] Stopped
2017-04-14T04:34:09.912Z,1492144449.912 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:34:09.912Z,1492144449.912 [Default:CheckIn] Stopped
2017-04-14T04:34:09.912Z,1492144449.912 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:34:09.913Z,1492144449.912 [Default:CheckIn](INFO): Running loop #11
2017-04-14T04:34:09.913Z,1492144449.913 [Default:CheckIn] Running Loop=11
2017-04-14T04:34:09.913Z,1492144449.913 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:34:09.913Z,1492144449.913 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:34:13.442Z,1492144453.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:13.525Z,1492144453.525 [NAL9602](INFO): Powering up
2017-04-14T04:34:13.572Z,1492144453.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:13.925Z,1492144453.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:14.355Z,1492144454.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:14.726Z,1492144454.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:15.170Z,1492144455.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:15.534Z,1492144455.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:15.929Z,1492144455.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:16.327Z,1492144456.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:16.724Z,1492144456.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:17.136Z,1492144457.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:17.534Z,1492144457.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:17.934Z,1492144457.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:18.353Z,1492144458.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:18.732Z,1492144458.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:19.181Z,1492144459.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:19.597Z,1492144459.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:19.966Z,1492144459.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:20.511Z,1492144460.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:20.762Z,1492144460.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:21.177Z,1492144461.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:21.582Z,1492144461.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:21.933Z,1492144461.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:22.347Z,1492144462.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:22.754Z,1492144462.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:23.135Z,1492144463.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:23.539Z,1492144463.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:23.938Z,1492144463.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:24.338Z,1492144464.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:24.681Z,1492144464.681 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:34:24.742Z,1492144464.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:25.143Z,1492144465.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:25.542Z,1492144465.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:25.966Z,1492144465.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:26.344Z,1492144466.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:26.722Z,1492144466.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:27.150Z,1492144467.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:27.521Z,1492144467.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:27.940Z,1492144467.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:28.353Z,1492144468.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:28.727Z,1492144468.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:29.126Z,1492144469.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:29.526Z,1492144469.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:29.974Z,1492144469.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:30.364Z,1492144470.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:30.732Z,1492144470.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:31.203Z,1492144471.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:31.556Z,1492144471.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:32.009Z,1492144472.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:32.362Z,1492144472.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:32.752Z,1492144472.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:33.131Z,1492144473.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:33.586Z,1492144473.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:33.940Z,1492144473.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:34.340Z,1492144474.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:34.773Z,1492144474.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:35.186Z,1492144475.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:35.542Z,1492144475.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:35.946Z,1492144475.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:36.419Z,1492144476.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:36.767Z,1492144476.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:37.173Z,1492144477.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:37.626Z,1492144477.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:37.971Z,1492144477.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:38.408Z,1492144478.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:38.761Z,1492144478.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:39.154Z,1492144479.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:39.554Z,1492144479.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:39.929Z,1492144479.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:39.951Z,1492144479.951 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:39.951Z,1492144479.951 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:34:39.952Z,1492144479.952 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:34:39.966Z,1492144479.966 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:34:40.322Z,1492144480.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:40.348Z,1492144480.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:34:40.349Z,1492144480.349 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:34:40.726Z,1492144480.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:40.732Z,1492144480.732 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:34:40.732Z,1492144480.732 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:34:40.732Z,1492144480.732 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:34:41.130Z,1492144481.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:41.560Z,1492144481.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:41.945Z,1492144481.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:42.314Z,1492144482.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:42.722Z,1492144482.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:43.126Z,1492144483.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:43.522Z,1492144483.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:43.956Z,1492144483.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:44.323Z,1492144484.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:44.759Z,1492144484.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:45.164Z,1492144485.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:45.525Z,1492144485.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:45.930Z,1492144485.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:46.325Z,1492144486.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:46.720Z,1492144486.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:47.124Z,1492144487.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:47.522Z,1492144487.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:47.927Z,1492144487.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:48.333Z,1492144488.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:48.730Z,1492144488.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:49.142Z,1492144489.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:49.601Z,1492144489.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:49.942Z,1492144489.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:50.337Z,1492144490.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:50.713Z,1492144490.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:51.162Z,1492144491.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:51.543Z,1492144491.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:51.921Z,1492144491.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:52.321Z,1492144492.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:52.321Z,1492144492.321 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:34:52.321Z,1492144492.321 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:34:52.328Z,1492144492.328 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:52.328Z,1492144492.328 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:34:52.328Z,1492144492.328 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:34:52.358Z,1492144492.358 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:34:52.359Z,1492144492.359 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:34:52.715Z,1492144492.715 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:34:52.716Z,1492144492.716 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:34:52.716Z,1492144492.716 [BPC1](ERROR): Communications Fault
2017-04-14T04:34:52.820Z,1492144492.820 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:34:52.820Z,1492144492.820 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:34:52.821Z,1492144492.821 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:34:52.821Z,1492144492.821 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:34:52.822Z,1492144492.822 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:34:53.133Z,1492144493.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:34:53.134Z,1492144493.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:34:53.134Z,1492144493.134 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:34:53.148Z,1492144493.148 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:34:53.148Z,1492144493.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:34:53.148Z,1492144493.148 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:34:53.522Z,1492144493.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:53.926Z,1492144493.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:53.977Z,1492144493.977 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:34:53.977Z,1492144493.977 [BPC1] No Fault, FailCount= 1
2017-04-14T04:34:54.392Z,1492144494.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:54.762Z,1492144494.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:55.126Z,1492144495.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:55.528Z,1492144495.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:56.012Z,1492144496.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:56.313Z,1492144496.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:56.738Z,1492144496.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:57.136Z,1492144497.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:57.543Z,1492144497.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:57.942Z,1492144497.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:58.379Z,1492144498.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:58.742Z,1492144498.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:59.142Z,1492144499.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:59.533Z,1492144499.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:34:59.922Z,1492144499.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:00.321Z,1492144500.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:00.748Z,1492144500.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:01.126Z,1492144501.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:01.526Z,1492144501.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:01.926Z,1492144501.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:02.329Z,1492144502.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:02.724Z,1492144502.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:03.142Z,1492144503.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:03.532Z,1492144503.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:03.936Z,1492144503.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:04.336Z,1492144504.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:04.730Z,1492144504.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:05.130Z,1492144505.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:05.533Z,1492144505.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:05.930Z,1492144505.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:06.330Z,1492144506.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:06.754Z,1492144506.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:07.142Z,1492144507.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:07.533Z,1492144507.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:07.977Z,1492144507.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:08.366Z,1492144508.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:08.789Z,1492144508.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:09.152Z,1492144509.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:09.562Z,1492144509.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:09.923Z,1492144509.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:16.627Z,1492144516.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:16.846Z,1492144516.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:17.210Z,1492144517.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:17.621Z,1492144517.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:17.970Z,1492144517.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:18.384Z,1492144518.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:18.782Z,1492144518.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:19.181Z,1492144519.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:19.579Z,1492144519.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:20.003Z,1492144520.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:20.374Z,1492144520.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:20.776Z,1492144520.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:21.173Z,1492144521.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:21.661Z,1492144521.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:21.988Z,1492144521.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:22.422Z,1492144522.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:22.782Z,1492144522.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:23.199Z,1492144523.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:23.623Z,1492144523.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:23.982Z,1492144523.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:24.380Z,1492144524.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:24.777Z,1492144524.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:25.183Z,1492144525.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:25.590Z,1492144525.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:25.988Z,1492144525.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:26.387Z,1492144526.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:26.762Z,1492144526.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:27.193Z,1492144527.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:27.599Z,1492144527.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:28.054Z,1492144528.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:28.402Z,1492144528.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:28.780Z,1492144528.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:29.182Z,1492144529.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:29.586Z,1492144529.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:29.976Z,1492144529.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:30.383Z,1492144530.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:30.781Z,1492144530.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:31.190Z,1492144531.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:31.626Z,1492144531.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:31.982Z,1492144531.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:32.406Z,1492144532.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:32.805Z,1492144532.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:33.169Z,1492144533.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:33.594Z,1492144533.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:33.996Z,1492144533.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:34.368Z,1492144534.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:34.762Z,1492144534.763 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:35:34.763Z,1492144534.763 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:35:34.763Z,1492144534.763 [BPC1](ERROR): Data Fault
2017-04-14T04:35:34.830Z,1492144534.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:34.885Z,1492144534.885 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:35:35.182Z,1492144535.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:35.602Z,1492144535.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:36.023Z,1492144536.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:36.113Z,1492144536.113 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:35:36.113Z,1492144536.113 [BPC1] No Fault, FailCount= 1
2017-04-14T04:35:36.496Z,1492144536.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:36.802Z,1492144536.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:37.182Z,1492144537.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:37.591Z,1492144537.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:37.982Z,1492144537.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:38.409Z,1492144538.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:38.794Z,1492144538.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:39.208Z,1492144539.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:39.576Z,1492144539.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:39.971Z,1492144539.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:40.371Z,1492144540.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:40.776Z,1492144540.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:41.190Z,1492144541.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:41.581Z,1492144541.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:41.974Z,1492144541.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:42.386Z,1492144542.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:42.775Z,1492144542.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:43.180Z,1492144543.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:43.596Z,1492144543.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:43.971Z,1492144543.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:44.330Z,1492144544.330 [NAL9602](INFO): SBD MO Status=0, MOMSN=2104, MT Status=0, MTMSN=0
2017-04-14T04:35:44.330Z,1492144544.330 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:35:44.402Z,1492144544.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:44.802Z,1492144544.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:45.210Z,1492144545.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:45.540Z,1492144545.540 [NAL9602](INFO): GPS fix at 20170414T043550: (36.802373, -121.787148)
2017-04-14T04:35:45.622Z,1492144545.622 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:35:45.622Z,1492144545.622 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:35:46.002Z,1492144546.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:46.002Z,1492144546.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:35:46.002Z,1492144546.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:35:46.010Z,1492144546.010 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:46.010Z,1492144546.010 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:35:46.010Z,1492144546.010 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:35:46.025Z,1492144546.025 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:35:46.025Z,1492144546.025 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:35:46.542Z,1492144546.542 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:35:46.542Z,1492144546.542 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:35:46.552Z,1492144546.552 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:35:46.552Z,1492144546.552 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:35:46.932Z,1492144546.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:35:46.933Z,1492144546.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:35:46.933Z,1492144546.933 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:35:46.969Z,1492144546.969 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:35:46.970Z,1492144546.970 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:35:46.970Z,1492144546.970 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:35:51.558Z,1492144551.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:51.645Z,1492144551.645 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0048.lzma
2017-04-14T04:35:51.757Z,1492144551.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:52.061Z,1492144552.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:52.708Z,1492144552.708 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0048.lzma.bak
2017-04-14T04:35:52.708Z,1492144552.708 [DataOverHttps](INFO): SBD MOMSN=4885157
2017-04-14T04:35:52.790Z,1492144552.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:53.023Z,1492144553.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:53.374Z,1492144553.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:58.305Z,1492144558.305 [NAL9602](INFO): Powering down
2017-04-14T04:35:58.408Z,1492144558.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:58.696Z,1492144558.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:59.031Z,1492144559.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:59.418Z,1492144559.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:35:59.768Z,1492144559.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:00.151Z,1492144560.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:03.733Z,1492144563.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:03.850Z,1492144563.850 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0049.lzma
2017-04-14T04:36:03.944Z,1492144563.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:04.220Z,1492144564.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:04.566Z,1492144564.566 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0049.lzma.bak
2017-04-14T04:36:04.566Z,1492144564.566 [DataOverHttps](INFO): SBD MOMSN=4885160
2017-04-14T04:36:04.633Z,1492144564.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:05.030Z,1492144565.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:05.052Z,1492144565.053 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:36:05.053Z,1492144565.053 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:36:05.053Z,1492144565.053 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:36:05.417Z,1492144565.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:09.576Z,1492144569.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:09.757Z,1492144569.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:10.178Z,1492144570.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:10.593Z,1492144570.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:10.940Z,1492144570.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:11.354Z,1492144571.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:11.709Z,1492144571.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:12.134Z,1492144572.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:12.546Z,1492144572.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:12.974Z,1492144572.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:13.318Z,1492144573.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:13.724Z,1492144573.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:14.115Z,1492144574.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:14.515Z,1492144574.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:14.912Z,1492144574.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:15.320Z,1492144575.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:15.716Z,1492144575.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:16.113Z,1492144576.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:16.514Z,1492144576.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:16.919Z,1492144576.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:17.327Z,1492144577.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:17.711Z,1492144577.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:18.113Z,1492144578.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:18.529Z,1492144578.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:18.928Z,1492144578.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:19.317Z,1492144579.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:19.723Z,1492144579.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:20.129Z,1492144580.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:20.509Z,1492144580.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:21.045Z,1492144581.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:21.391Z,1492144581.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:21.768Z,1492144581.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:22.117Z,1492144582.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:22.518Z,1492144582.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:22.965Z,1492144582.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:23.397Z,1492144583.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:23.723Z,1492144583.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:24.129Z,1492144584.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:24.565Z,1492144584.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:24.936Z,1492144584.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:25.355Z,1492144585.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:25.740Z,1492144585.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:26.117Z,1492144586.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:26.534Z,1492144586.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:26.986Z,1492144586.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:27.308Z,1492144587.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:27.702Z,1492144587.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:28.116Z,1492144588.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:28.507Z,1492144588.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:28.906Z,1492144588.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:29.323Z,1492144589.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:29.712Z,1492144589.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:30.107Z,1492144590.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:30.514Z,1492144590.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:30.908Z,1492144590.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:31.306Z,1492144591.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:31.704Z,1492144591.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:32.107Z,1492144592.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:32.501Z,1492144592.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:32.902Z,1492144592.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:33.342Z,1492144593.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:33.706Z,1492144593.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:34.106Z,1492144594.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:34.513Z,1492144594.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:34.928Z,1492144594.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:35.315Z,1492144595.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:35.721Z,1492144595.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:36.118Z,1492144596.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:36.506Z,1492144596.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:36.927Z,1492144596.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:37.317Z,1492144597.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:37.723Z,1492144597.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:38.147Z,1492144598.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:38.533Z,1492144598.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:38.986Z,1492144598.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:39.314Z,1492144599.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:39.738Z,1492144599.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:40.101Z,1492144600.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:40.538Z,1492144600.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:40.993Z,1492144600.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:41.310Z,1492144601.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:41.718Z,1492144601.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:42.107Z,1492144602.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:42.513Z,1492144602.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:42.910Z,1492144602.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:43.306Z,1492144603.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:43.710Z,1492144603.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:44.161Z,1492144604.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:44.512Z,1492144604.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:44.914Z,1492144604.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:45.323Z,1492144605.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:45.780Z,1492144605.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:46.174Z,1492144606.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:46.542Z,1492144606.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:46.937Z,1492144606.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:47.332Z,1492144607.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:47.703Z,1492144607.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:48.097Z,1492144608.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:48.549Z,1492144608.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:48.924Z,1492144608.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:49.314Z,1492144609.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:49.693Z,1492144609.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:50.138Z,1492144610.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:50.523Z,1492144610.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:50.934Z,1492144610.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:51.319Z,1492144611.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:51.698Z,1492144611.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:52.108Z,1492144612.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:52.503Z,1492144612.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:52.958Z,1492144612.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:53.318Z,1492144613.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:53.734Z,1492144613.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:54.106Z,1492144614.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:54.510Z,1492144614.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:54.954Z,1492144614.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:55.310Z,1492144615.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:55.701Z,1492144615.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:56.103Z,1492144616.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:56.504Z,1492144616.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:56.901Z,1492144616.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:57.299Z,1492144617.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:57.698Z,1492144617.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:58.105Z,1492144618.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:58.516Z,1492144618.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:58.907Z,1492144618.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:59.312Z,1492144619.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:36:59.697Z,1492144619.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:00.093Z,1492144620.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:00.509Z,1492144620.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:00.941Z,1492144620.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:01.313Z,1492144621.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:01.708Z,1492144621.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:02.105Z,1492144622.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:02.507Z,1492144622.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:02.913Z,1492144622.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:03.310Z,1492144623.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:03.710Z,1492144623.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:04.108Z,1492144624.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:04.513Z,1492144624.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:04.925Z,1492144624.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:05.314Z,1492144625.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:05.715Z,1492144625.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:06.112Z,1492144626.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:06.513Z,1492144626.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:06.933Z,1492144626.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:11.518Z,1492144631.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:11.635Z,1492144631.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:12.039Z,1492144632.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:12.434Z,1492144632.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:12.842Z,1492144632.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:13.251Z,1492144633.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:13.655Z,1492144633.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:14.015Z,1492144634.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:14.463Z,1492144634.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:14.887Z,1492144634.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:15.248Z,1492144635.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:15.680Z,1492144635.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:16.050Z,1492144636.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:16.447Z,1492144636.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:16.873Z,1492144636.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:17.237Z,1492144637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:17.627Z,1492144637.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:18.023Z,1492144638.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:18.426Z,1492144638.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:18.851Z,1492144638.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:19.241Z,1492144639.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:19.680Z,1492144639.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:20.029Z,1492144640.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:20.433Z,1492144640.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:20.845Z,1492144640.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:21.234Z,1492144641.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:21.634Z,1492144641.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:22.031Z,1492144642.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:22.433Z,1492144642.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:22.879Z,1492144642.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:23.232Z,1492144643.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:23.621Z,1492144643.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:24.021Z,1492144644.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:24.420Z,1492144644.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:24.827Z,1492144644.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:25.228Z,1492144645.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:25.623Z,1492144645.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:26.021Z,1492144646.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:26.423Z,1492144646.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:26.894Z,1492144646.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:27.236Z,1492144647.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:27.669Z,1492144647.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:28.027Z,1492144648.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:28.458Z,1492144648.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:28.866Z,1492144648.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:29.236Z,1492144649.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:29.625Z,1492144649.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:30.020Z,1492144650.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:30.436Z,1492144650.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:30.851Z,1492144650.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:31.236Z,1492144651.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:31.632Z,1492144651.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:32.083Z,1492144652.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:32.442Z,1492144652.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:32.934Z,1492144652.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:33.231Z,1492144653.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:33.659Z,1492144653.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:34.031Z,1492144654.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:34.421Z,1492144654.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:34.827Z,1492144654.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:35.252Z,1492144655.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:35.661Z,1492144655.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:36.017Z,1492144656.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:36.422Z,1492144656.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:36.863Z,1492144656.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:37.240Z,1492144657.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:37.619Z,1492144657.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:38.014Z,1492144658.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:38.424Z,1492144658.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:38.820Z,1492144658.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:39.231Z,1492144659.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:39.618Z,1492144659.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:40.026Z,1492144660.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:40.408Z,1492144660.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:40.850Z,1492144660.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:40.857Z,1492144660.857 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:40.857Z,1492144660.857 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:37:40.857Z,1492144660.857 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:37:40.871Z,1492144660.871 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:37:41.222Z,1492144661.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:41.240Z,1492144661.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:37:41.241Z,1492144661.240 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:37:41.614Z,1492144661.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:41.619Z,1492144661.619 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:37:41.620Z,1492144661.620 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:37:41.620Z,1492144661.620 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:37:42.034Z,1492144662.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:42.435Z,1492144662.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:42.918Z,1492144662.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:43.278Z,1492144663.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:43.704Z,1492144663.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:44.018Z,1492144664.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:44.422Z,1492144664.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:44.938Z,1492144664.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:45.214Z,1492144665.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:45.612Z,1492144665.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:46.050Z,1492144666.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:46.417Z,1492144666.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:46.861Z,1492144666.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:47.223Z,1492144667.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:47.613Z,1492144667.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:48.014Z,1492144668.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:48.427Z,1492144668.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:48.833Z,1492144668.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:49.221Z,1492144669.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:49.622Z,1492144669.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:50.021Z,1492144670.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:50.413Z,1492144670.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:50.834Z,1492144670.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:51.230Z,1492144671.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:51.633Z,1492144671.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:52.031Z,1492144672.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:52.418Z,1492144672.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:52.818Z,1492144672.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:53.219Z,1492144673.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:53.616Z,1492144673.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:54.031Z,1492144674.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:54.426Z,1492144674.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:54.814Z,1492144674.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:55.267Z,1492144675.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:55.665Z,1492144675.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:56.028Z,1492144676.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:56.450Z,1492144676.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:56.854Z,1492144676.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:57.220Z,1492144677.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:57.650Z,1492144677.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:58.058Z,1492144678.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:58.434Z,1492144678.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:58.827Z,1492144678.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:59.234Z,1492144679.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:37:59.636Z,1492144679.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:00.048Z,1492144680.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:00.444Z,1492144680.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:00.942Z,1492144680.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:01.301Z,1492144681.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:01.634Z,1492144681.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:02.027Z,1492144682.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:02.434Z,1492144682.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:02.927Z,1492144682.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:03.240Z,1492144683.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:03.674Z,1492144683.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:04.064Z,1492144684.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:04.445Z,1492144684.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:04.875Z,1492144684.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:05.244Z,1492144685.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:05.646Z,1492144685.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:06.018Z,1492144686.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:10.496Z,1492144690.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:10.705Z,1492144690.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:11.022Z,1492144691.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:11.466Z,1492144691.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:11.825Z,1492144691.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:12.230Z,1492144692.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:12.697Z,1492144692.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:13.013Z,1492144693.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:13.413Z,1492144693.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:13.818Z,1492144693.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:14.218Z,1492144694.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:14.704Z,1492144694.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:15.079Z,1492144695.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:15.415Z,1492144695.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:15.817Z,1492144695.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:16.247Z,1492144696.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:16.719Z,1492144696.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:17.070Z,1492144697.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:17.418Z,1492144697.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:17.818Z,1492144697.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:18.215Z,1492144698.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:18.627Z,1492144698.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:19.030Z,1492144699.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:19.422Z,1492144699.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:19.818Z,1492144699.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:20.214Z,1492144700.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:20.664Z,1492144700.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:21.076Z,1492144701.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:21.426Z,1492144701.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:21.820Z,1492144701.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:22.213Z,1492144702.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:22.618Z,1492144702.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:23.052Z,1492144703.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:23.414Z,1492144703.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:23.816Z,1492144703.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:24.216Z,1492144704.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:24.766Z,1492144704.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:25.028Z,1492144705.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:25.430Z,1492144705.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:25.853Z,1492144705.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:26.235Z,1492144706.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:26.708Z,1492144706.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:27.042Z,1492144707.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:27.418Z,1492144707.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:27.813Z,1492144707.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:28.216Z,1492144708.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:28.752Z,1492144708.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:29.034Z,1492144709.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:29.417Z,1492144709.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:29.813Z,1492144709.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:30.209Z,1492144710.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:30.700Z,1492144710.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:31.018Z,1492144711.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:31.412Z,1492144711.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:31.810Z,1492144711.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:32.212Z,1492144712.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:32.614Z,1492144712.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:33.004Z,1492144713.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:33.409Z,1492144713.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:33.812Z,1492144713.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:34.205Z,1492144714.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:34.609Z,1492144714.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:35.044Z,1492144715.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:35.412Z,1492144715.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:35.817Z,1492144715.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:36.216Z,1492144716.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:36.618Z,1492144716.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:37.069Z,1492144717.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:37.420Z,1492144717.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:37.814Z,1492144717.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:38.221Z,1492144718.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:38.710Z,1492144718.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:39.062Z,1492144719.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:39.449Z,1492144719.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:39.825Z,1492144719.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:40.242Z,1492144720.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:40.666Z,1492144720.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:41.038Z,1492144721.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:41.446Z,1492144721.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:41.824Z,1492144721.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:42.215Z,1492144722.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:42.692Z,1492144722.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:43.030Z,1492144723.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:43.424Z,1492144723.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:43.805Z,1492144723.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:44.232Z,1492144724.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:44.680Z,1492144724.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:45.013Z,1492144725.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:45.426Z,1492144725.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:45.810Z,1492144725.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:46.213Z,1492144726.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:46.689Z,1492144726.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:47.025Z,1492144727.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:47.025Z,1492144727.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:38:47.025Z,1492144727.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:38:47.032Z,1492144727.032 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:47.032Z,1492144727.032 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:38:47.032Z,1492144727.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:38:47.046Z,1492144727.046 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:38:47.047Z,1492144727.046 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:38:47.460Z,1492144727.460 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:38:47.460Z,1492144727.460 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:38:47.461Z,1492144727.461 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:38:47.461Z,1492144727.461 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:38:47.839Z,1492144727.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:38:47.840Z,1492144727.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:38:47.840Z,1492144727.840 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:38:47.845Z,1492144727.845 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:38:47.845Z,1492144727.845 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:38:47.846Z,1492144727.846 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:38:48.229Z,1492144728.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:48.622Z,1492144728.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:49.073Z,1492144729.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:49.417Z,1492144729.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:49.824Z,1492144729.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:50.227Z,1492144730.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:50.616Z,1492144730.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:51.020Z,1492144731.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:51.421Z,1492144731.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:51.826Z,1492144731.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:52.226Z,1492144732.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:52.688Z,1492144732.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:53.037Z,1492144733.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:53.478Z,1492144733.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:53.814Z,1492144733.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:54.214Z,1492144734.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:54.710Z,1492144734.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:55.044Z,1492144735.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:55.452Z,1492144735.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:55.861Z,1492144735.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:56.218Z,1492144736.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:56.671Z,1492144736.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:57.018Z,1492144737.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:57.423Z,1492144737.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:57.813Z,1492144737.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:58.215Z,1492144738.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:58.691Z,1492144738.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:59.050Z,1492144739.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:59.412Z,1492144739.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:38:59.812Z,1492144739.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:00.212Z,1492144740.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:00.689Z,1492144740.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:01.027Z,1492144741.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:01.427Z,1492144741.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:01.805Z,1492144741.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:02.208Z,1492144742.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:02.614Z,1492144742.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:03.012Z,1492144743.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:03.418Z,1492144743.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:03.840Z,1492144743.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:04.228Z,1492144744.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:04.617Z,1492144744.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:05.047Z,1492144745.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:05.420Z,1492144745.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:05.834Z,1492144745.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:06.227Z,1492144746.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:09.810Z,1492144749.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:10.022Z,1492144750.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:10.338Z,1492144750.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:10.718Z,1492144750.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:11.134Z,1492144751.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:11.527Z,1492144751.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:11.914Z,1492144751.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:12.321Z,1492144752.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:12.717Z,1492144752.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:13.116Z,1492144753.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:13.521Z,1492144753.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:13.918Z,1492144753.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:14.314Z,1492144754.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:14.766Z,1492144754.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:15.133Z,1492144755.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:15.526Z,1492144755.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:15.928Z,1492144755.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:16.335Z,1492144756.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:16.704Z,1492144756.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:17.109Z,1492144757.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:17.510Z,1492144757.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:17.906Z,1492144757.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:18.313Z,1492144758.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:18.711Z,1492144758.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:19.109Z,1492144759.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:19.518Z,1492144759.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:19.912Z,1492144759.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:20.313Z,1492144760.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:20.712Z,1492144760.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:21.114Z,1492144761.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:21.514Z,1492144761.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:21.922Z,1492144761.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:22.314Z,1492144762.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:22.717Z,1492144762.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:23.166Z,1492144763.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:23.574Z,1492144763.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:23.909Z,1492144763.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:24.334Z,1492144764.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:24.842Z,1492144764.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:25.141Z,1492144765.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:25.578Z,1492144765.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:25.934Z,1492144765.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:26.314Z,1492144766.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:26.709Z,1492144766.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:27.114Z,1492144767.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:27.521Z,1492144767.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:27.926Z,1492144767.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:28.315Z,1492144768.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:28.717Z,1492144768.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:29.118Z,1492144769.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:29.521Z,1492144769.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:29.908Z,1492144769.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:30.326Z,1492144770.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:30.734Z,1492144770.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:31.114Z,1492144771.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:31.534Z,1492144771.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:31.992Z,1492144771.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:32.342Z,1492144772.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:32.721Z,1492144772.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:33.139Z,1492144773.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:33.533Z,1492144773.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:33.942Z,1492144773.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:34.350Z,1492144774.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:34.710Z,1492144774.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:35.108Z,1492144775.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:35.511Z,1492144775.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:35.914Z,1492144775.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:36.318Z,1492144776.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:36.724Z,1492144776.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:37.118Z,1492144777.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:37.534Z,1492144777.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:37.979Z,1492144777.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:38.315Z,1492144778.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:38.758Z,1492144778.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:39.115Z,1492144779.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:39.537Z,1492144779.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:39.946Z,1492144779.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:40.300Z,1492144780.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:40.729Z,1492144780.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:41.106Z,1492144781.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:41.509Z,1492144781.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:41.911Z,1492144781.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:42.318Z,1492144782.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:42.720Z,1492144782.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:43.129Z,1492144783.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:43.534Z,1492144783.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:43.918Z,1492144783.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:44.318Z,1492144784.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:44.724Z,1492144784.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:45.122Z,1492144785.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:45.501Z,1492144785.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:45.932Z,1492144785.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:46.330Z,1492144786.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:46.703Z,1492144786.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:47.107Z,1492144787.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:47.510Z,1492144787.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:47.912Z,1492144787.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:48.308Z,1492144788.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:48.714Z,1492144788.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:49.113Z,1492144789.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:49.519Z,1492144789.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:49.913Z,1492144789.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:50.317Z,1492144790.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:50.718Z,1492144790.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:51.117Z,1492144791.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:51.516Z,1492144791.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:51.974Z,1492144791.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:52.331Z,1492144792.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:52.710Z,1492144792.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:53.120Z,1492144793.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:53.538Z,1492144793.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:53.916Z,1492144793.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:54.342Z,1492144794.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:54.714Z,1492144794.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:55.154Z,1492144795.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:55.508Z,1492144795.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:55.912Z,1492144795.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:56.309Z,1492144796.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:56.714Z,1492144796.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:57.111Z,1492144797.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:57.509Z,1492144797.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:57.914Z,1492144797.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:58.314Z,1492144798.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:58.716Z,1492144798.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:59.126Z,1492144799.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:59.510Z,1492144799.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:39:59.958Z,1492144799.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:00.310Z,1492144800.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:00.859Z,1492144800.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:01.103Z,1492144801.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:01.510Z,1492144801.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:01.937Z,1492144801.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:02.306Z,1492144802.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:02.710Z,1492144802.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:03.113Z,1492144803.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:03.520Z,1492144803.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:03.916Z,1492144803.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:04.330Z,1492144804.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:04.727Z,1492144804.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:05.126Z,1492144805.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:05.544Z,1492144805.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:05.944Z,1492144805.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:06.309Z,1492144806.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:09.925Z,1492144809.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:10.077Z,1492144810.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:10.460Z,1492144810.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:10.885Z,1492144810.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:11.246Z,1492144811.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:11.685Z,1492144811.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:12.040Z,1492144812.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:12.461Z,1492144812.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:12.901Z,1492144812.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:13.246Z,1492144813.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:13.647Z,1492144813.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:14.044Z,1492144814.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:14.496Z,1492144814.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:14.899Z,1492144814.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:15.247Z,1492144815.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:15.650Z,1492144815.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:16.067Z,1492144816.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:16.500Z,1492144816.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:16.836Z,1492144816.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:17.238Z,1492144817.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:17.643Z,1492144817.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:18.031Z,1492144818.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:18.553Z,1492144818.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:18.833Z,1492144818.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:19.269Z,1492144819.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:19.636Z,1492144819.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:20.052Z,1492144820.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:20.526Z,1492144820.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:20.852Z,1492144820.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:21.255Z,1492144821.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:21.657Z,1492144821.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:22.051Z,1492144822.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:22.542Z,1492144822.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:22.859Z,1492144822.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:23.236Z,1492144823.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:23.665Z,1492144823.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:24.038Z,1492144824.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:24.570Z,1492144824.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:24.871Z,1492144824.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:25.258Z,1492144825.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:25.644Z,1492144825.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:25.784Z,1492144825.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:40:26.054Z,1492144826.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:26.486Z,1492144826.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:26.580Z,1492144826.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:40:26.974Z,1492144826.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:27.250Z,1492144827.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:27.665Z,1492144827.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:28.050Z,1492144828.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:28.448Z,1492144828.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:28.865Z,1492144828.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:29.275Z,1492144829.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:29.656Z,1492144829.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:30.041Z,1492144830.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:30.526Z,1492144830.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:30.845Z,1492144830.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:31.254Z,1492144831.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:31.627Z,1492144831.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:32.030Z,1492144832.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:32.525Z,1492144832.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:32.836Z,1492144832.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:33.255Z,1492144833.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:33.694Z,1492144833.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:34.050Z,1492144834.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:34.552Z,1492144834.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:34.854Z,1492144834.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:35.243Z,1492144835.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:35.653Z,1492144835.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:36.065Z,1492144836.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:36.561Z,1492144836.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:36.885Z,1492144836.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:37.234Z,1492144837.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:37.631Z,1492144837.631 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T04:40:37.631Z,1492144837.631 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:40:37.631Z,1492144837.631 [BPC1](ERROR): Data Fault
2017-04-14T04:40:37.678Z,1492144837.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:37.721Z,1492144837.721 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:40:38.035Z,1492144838.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:38.505Z,1492144838.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:38.918Z,1492144838.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:38.997Z,1492144838.997 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:40:38.997Z,1492144838.997 [BPC1] No Fault, FailCount= 1
2017-04-14T04:40:39.327Z,1492144839.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:39.744Z,1492144839.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:40.099Z,1492144840.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:40.525Z,1492144840.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:40.908Z,1492144840.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:41.264Z,1492144841.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:41.656Z,1492144841.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:41.663Z,1492144841.663 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:41.663Z,1492144841.663 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:40:41.663Z,1492144841.663 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:40:41.720Z,1492144841.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:40:42.046Z,1492144842.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:42.065Z,1492144842.065 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:40:42.065Z,1492144842.065 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:40:42.440Z,1492144842.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:42.450Z,1492144842.450 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:40:42.450Z,1492144842.450 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:40:42.451Z,1492144842.451 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:40:42.850Z,1492144842.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:43.247Z,1492144843.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:43.642Z,1492144843.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:44.043Z,1492144844.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:44.531Z,1492144844.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:44.847Z,1492144844.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:45.225Z,1492144845.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:45.646Z,1492144845.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:46.032Z,1492144846.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:46.515Z,1492144846.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:46.850Z,1492144846.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:47.238Z,1492144847.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:47.638Z,1492144847.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:48.041Z,1492144848.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:48.485Z,1492144848.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:48.835Z,1492144848.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:49.242Z,1492144849.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:49.692Z,1492144849.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:50.056Z,1492144850.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:50.547Z,1492144850.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:50.840Z,1492144850.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:51.300Z,1492144851.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:51.691Z,1492144851.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:52.099Z,1492144852.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:52.503Z,1492144852.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:52.884Z,1492144852.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:53.242Z,1492144853.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:53.668Z,1492144853.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:54.085Z,1492144854.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:54.440Z,1492144854.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:54.874Z,1492144854.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:55.250Z,1492144855.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:55.637Z,1492144855.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:56.056Z,1492144856.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:56.458Z,1492144856.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:56.859Z,1492144856.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:57.244Z,1492144857.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:57.666Z,1492144857.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:58.036Z,1492144858.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:58.523Z,1492144858.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:58.895Z,1492144858.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:59.261Z,1492144859.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:40:59.648Z,1492144859.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:00.087Z,1492144860.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:00.583Z,1492144860.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:00.876Z,1492144860.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:01.283Z,1492144861.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:01.636Z,1492144861.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:02.039Z,1492144862.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:02.490Z,1492144862.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:02.878Z,1492144862.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:03.243Z,1492144863.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:03.637Z,1492144863.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:04.086Z,1492144864.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:04.494Z,1492144864.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:04.870Z,1492144864.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:05.253Z,1492144865.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:05.717Z,1492144865.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:05.766Z,1492144865.766 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:41:05.766Z,1492144865.766 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:41:05.766Z,1492144865.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:41:05.766Z,1492144865.766 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:41:06.115Z,1492144866.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:06.140Z,1492144866.141 [Default:CheckIn:D] Stopped
2017-04-14T04:41:06.141Z,1492144866.141 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:41:06.721Z,1492144866.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:06.798Z,1492144866.798 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 75.013696 min 
2017-04-14T04:41:06.798Z,1492144866.798 [Default:CheckIn:E] Stopped
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn] Stopped
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn](INFO): Running loop #12
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn] Running Loop=12
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:41:06.799Z,1492144866.799 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:41:11.901Z,1492144871.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:11.969Z,1492144871.969 [NAL9602](INFO): Powering up
2017-04-14T04:41:12.040Z,1492144872.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:12.539Z,1492144872.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:12.799Z,1492144872.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:13.278Z,1492144873.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:13.615Z,1492144873.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:14.009Z,1492144874.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:14.653Z,1492144874.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:14.871Z,1492144874.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:15.230Z,1492144875.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:15.717Z,1492144875.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:16.124Z,1492144876.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:16.557Z,1492144876.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:16.876Z,1492144876.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:17.225Z,1492144877.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:17.614Z,1492144877.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:18.046Z,1492144878.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:18.514Z,1492144878.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:18.849Z,1492144878.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:19.249Z,1492144879.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:19.664Z,1492144879.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:20.026Z,1492144880.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:20.518Z,1492144880.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:20.999Z,1492144880.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:21.324Z,1492144881.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:21.667Z,1492144881.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:22.087Z,1492144882.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:22.486Z,1492144882.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:22.840Z,1492144882.840 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:41:22.949Z,1492144882.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:23.449Z,1492144883.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:23.810Z,1492144883.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:24.185Z,1492144884.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:24.558Z,1492144884.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:25.142Z,1492144885.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:25.682Z,1492144885.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:26.486Z,1492144886.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:26.994Z,1492144886.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:27.366Z,1492144887.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:27.826Z,1492144887.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:28.116Z,1492144888.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:28.483Z,1492144888.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:28.875Z,1492144888.875 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:41:28.875Z,1492144888.875 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:41:28.876Z,1492144888.875 [BPC1](ERROR): Communications Fault
2017-04-14T04:41:28.946Z,1492144888.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:29.053Z,1492144889.053 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:41:29.348Z,1492144889.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:29.691Z,1492144889.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:30.091Z,1492144890.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:30.145Z,1492144890.145 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:41:30.145Z,1492144890.145 [BPC1] No Fault, FailCount= 1
2017-04-14T04:41:30.550Z,1492144890.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:30.955Z,1492144890.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:31.304Z,1492144891.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:31.676Z,1492144891.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:32.058Z,1492144892.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:32.530Z,1492144892.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:32.858Z,1492144892.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:33.284Z,1492144893.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:33.662Z,1492144893.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:34.122Z,1492144894.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:34.544Z,1492144894.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:34.885Z,1492144894.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:35.297Z,1492144895.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:35.677Z,1492144895.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:36.076Z,1492144896.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:36.470Z,1492144896.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:36.882Z,1492144896.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:37.120Z,1492144897.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:41:37.261Z,1492144897.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:37.673Z,1492144897.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:37.916Z,1492144897.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:41:38.067Z,1492144898.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:38.462Z,1492144898.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:38.878Z,1492144898.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:39.282Z,1492144899.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:39.651Z,1492144899.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:40.054Z,1492144900.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:40.424Z,1492144900.424 [NAL9602](INFO): SBD MO Status=0, MOMSN=2105, MT Status=0, MTMSN=0
2017-04-14T04:41:40.425Z,1492144900.425 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:41:40.462Z,1492144900.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:40.859Z,1492144900.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:41.269Z,1492144901.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:41.666Z,1492144901.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:42.074Z,1492144902.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:42.480Z,1492144902.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:42.866Z,1492144902.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:43.288Z,1492144903.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:43.674Z,1492144903.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:44.072Z,1492144904.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:44.474Z,1492144904.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:44.851Z,1492144904.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:45.255Z,1492144905.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:45.658Z,1492144905.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:46.101Z,1492144906.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:46.450Z,1492144906.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:46.863Z,1492144906.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:47.291Z,1492144907.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:47.664Z,1492144907.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:48.062Z,1492144908.062 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:48.062Z,1492144908.062 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:41:48.063Z,1492144908.063 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:41:48.069Z,1492144908.069 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:48.069Z,1492144908.069 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:41:48.069Z,1492144908.069 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:41:48.120Z,1492144908.120 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:41:48.120Z,1492144908.120 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:41:48.537Z,1492144908.537 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:41:48.537Z,1492144908.537 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:41:48.538Z,1492144908.538 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:41:48.538Z,1492144908.538 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:41:48.838Z,1492144908.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:41:48.838Z,1492144908.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:41:48.838Z,1492144908.838 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:41:48.865Z,1492144908.865 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:41:48.866Z,1492144908.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:41:48.866Z,1492144908.866 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:41:49.238Z,1492144909.239 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:41:49.239Z,1492144909.239 [BPC1] Communications Fault, FailCount= 2
2017-04-14T04:41:49.239Z,1492144909.239 [BPC1](ERROR): Communications Fault
2017-04-14T04:41:49.282Z,1492144909.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:49.314Z,1492144909.314 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:41:49.669Z,1492144909.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:50.012Z,1492144910.012 [NAL9602](INFO): GPS fix at 20170414T044156: (36.802310, -121.787117)
2017-04-14T04:41:50.153Z,1492144910.153 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:41:50.153Z,1492144910.153 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:41:50.450Z,1492144910.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:50.450Z,1492144910.450 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:41:50.450Z,1492144910.450 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:41:50.478Z,1492144910.478 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:50.478Z,1492144910.478 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:41:50.478Z,1492144910.478 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:41:50.521Z,1492144910.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:41:50.521Z,1492144910.522 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:41:50.522Z,1492144910.522 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:41:50.522Z,1492144910.522 [BPC1] No Fault, FailCount= 2
2017-04-14T04:41:51.457Z,1492144911.457 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:41:51.457Z,1492144911.457 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:41:51.458Z,1492144911.458 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:41:51.458Z,1492144911.458 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:41:51.730Z,1492144911.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:41:51.731Z,1492144911.731 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:41:51.747Z,1492144911.747 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:41:51.758Z,1492144911.759 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:41:51.759Z,1492144911.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:41:51.760Z,1492144911.760 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:41:55.877Z,1492144915.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:55.954Z,1492144915.954 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20170414T032153/Courier0052.lzma
2017-04-14T04:41:56.022Z,1492144916.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:56.512Z,1492144916.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:56.734Z,1492144916.734 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0052.lzma.bak
2017-04-14T04:41:56.734Z,1492144916.734 [DataOverHttps](INFO): SBD MOMSN=4885164
2017-04-14T04:41:56.890Z,1492144916.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:57.224Z,1492144917.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:41:57.626Z,1492144917.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:01.238Z,1492144921.238 [NAL9602](INFO): Powering down
2017-04-14T04:42:01.339Z,1492144921.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:01.462Z,1492144921.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:01.836Z,1492144921.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:02.230Z,1492144922.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:02.637Z,1492144922.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:03.046Z,1492144923.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:03.434Z,1492144923.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:07.901Z,1492144927.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:07.969Z,1492144927.969 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0053.lzma
2017-04-14T04:42:08.016Z,1492144928.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:08.434Z,1492144928.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:08.766Z,1492144928.766 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0053.lzma.bak
2017-04-14T04:42:08.766Z,1492144928.766 [DataOverHttps](INFO): SBD MOMSN=4885167
2017-04-14T04:42:08.977Z,1492144928.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:09.414Z,1492144929.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:09.514Z,1492144929.514 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:42:09.514Z,1492144929.514 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:42:09.514Z,1492144929.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:42:09.735Z,1492144929.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:14.529Z,1492144934.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:14.661Z,1492144934.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:15.038Z,1492144935.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:15.078Z,1492144935.078 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:42:15.462Z,1492144935.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:15.858Z,1492144935.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:16.240Z,1492144936.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:16.659Z,1492144936.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:17.052Z,1492144937.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:17.445Z,1492144937.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:17.588Z,1492144937.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:17.850Z,1492144937.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:18.241Z,1492144938.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:18.385Z,1492144938.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:18.702Z,1492144938.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:19.043Z,1492144939.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:19.453Z,1492144939.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:19.848Z,1492144939.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:20.245Z,1492144940.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:20.730Z,1492144940.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:21.047Z,1492144941.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:21.454Z,1492144941.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:21.848Z,1492144941.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:22.330Z,1492144942.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:22.654Z,1492144942.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:23.046Z,1492144943.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:23.459Z,1492144943.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:23.856Z,1492144943.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:24.320Z,1492144944.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:24.631Z,1492144944.631 [BPC1](ERROR): Failed to parse message.
2017-04-14T04:42:24.632Z,1492144944.632 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:42:24.632Z,1492144944.632 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:42:24.632Z,1492144944.632 [BPC1](ERROR): Data Fault
2017-04-14T04:42:24.659Z,1492144944.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:24.703Z,1492144944.703 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:42:25.050Z,1492144945.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:25.451Z,1492144945.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:25.844Z,1492144945.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:25.864Z,1492144945.864 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:42:25.864Z,1492144945.864 [BPC1] No Fault, FailCount= 1
2017-04-14T04:42:26.487Z,1492144946.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:26.734Z,1492144946.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:27.043Z,1492144947.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:27.501Z,1492144947.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:27.842Z,1492144947.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:28.329Z,1492144948.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:28.644Z,1492144948.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:29.049Z,1492144949.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:29.448Z,1492144949.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:29.857Z,1492144949.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:30.262Z,1492144950.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:30.664Z,1492144950.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:31.064Z,1492144951.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:31.473Z,1492144951.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:31.871Z,1492144951.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:32.278Z,1492144952.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:32.703Z,1492144952.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:33.062Z,1492144953.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:33.461Z,1492144953.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:33.842Z,1492144953.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:34.246Z,1492144954.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:34.695Z,1492144954.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:35.053Z,1492144955.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:35.444Z,1492144955.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:35.846Z,1492144955.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:36.316Z,1492144956.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:36.658Z,1492144956.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:37.086Z,1492144957.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:37.438Z,1492144957.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:37.866Z,1492144957.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:38.333Z,1492144958.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:38.682Z,1492144958.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:39.079Z,1492144959.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:39.442Z,1492144959.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:39.852Z,1492144959.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:40.298Z,1492144960.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:40.638Z,1492144960.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:41.061Z,1492144961.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:41.440Z,1492144961.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:41.839Z,1492144961.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:42.312Z,1492144962.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:42.674Z,1492144962.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:43.068Z,1492144963.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:43.439Z,1492144963.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:43.839Z,1492144963.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:44.238Z,1492144964.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:44.632Z,1492144964.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:45.070Z,1492144965.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:45.474Z,1492144965.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:45.855Z,1492144965.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:46.293Z,1492144966.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:46.627Z,1492144966.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:46.676Z,1492144966.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:47.023Z,1492144967.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:47.064Z,1492144967.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:47.428Z,1492144967.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:47.444Z,1492144967.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:47.819Z,1492144967.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:47.862Z,1492144967.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:48.223Z,1492144968.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:48.259Z,1492144968.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:48.623Z,1492144968.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:48.714Z,1492144968.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:49.019Z,1492144969.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:49.063Z,1492144969.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:49.428Z,1492144969.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:49.487Z,1492144969.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:49.827Z,1492144969.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:49.882Z,1492144969.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:50.274Z,1492144970.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:50.360Z,1492144970.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:50.617Z,1492144970.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:50.666Z,1492144970.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:51.025Z,1492144971.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:51.058Z,1492144971.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:51.421Z,1492144971.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:51.466Z,1492144971.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:51.821Z,1492144971.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:51.874Z,1492144971.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:52.285Z,1492144972.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:52.314Z,1492144972.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:52.621Z,1492144972.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:52.658Z,1492144972.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:53.025Z,1492144973.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:53.070Z,1492144973.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:53.422Z,1492144973.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:53.438Z,1492144973.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:53.826Z,1492144973.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:53.845Z,1492144973.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:54.281Z,1492144974.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:54.325Z,1492144974.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:54.626Z,1492144974.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:54.663Z,1492144974.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:55.027Z,1492144975.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:55.043Z,1492144975.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:55.428Z,1492144975.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:55.444Z,1492144975.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:55.825Z,1492144975.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:55.840Z,1492144975.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:56.264Z,1492144976.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:56.301Z,1492144976.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:56.617Z,1492144976.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:56.649Z,1492144976.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:57.028Z,1492144977.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:57.069Z,1492144977.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:57.425Z,1492144977.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:57.440Z,1492144977.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:57.826Z,1492144977.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:57.844Z,1492144977.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:58.245Z,1492144978.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:58.338Z,1492144978.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:58.627Z,1492144978.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:58.677Z,1492144978.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:59.034Z,1492144979.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:59.076Z,1492144979.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:59.429Z,1492144979.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:59.462Z,1492144979.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:42:59.832Z,1492144979.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:42:59.847Z,1492144979.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:00.222Z,1492144980.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:00.258Z,1492144980.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:00.624Z,1492144980.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:00.702Z,1492144980.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:01.017Z,1492144981.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:01.064Z,1492144981.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:01.417Z,1492144981.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:01.463Z,1492144981.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:01.821Z,1492144981.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:01.848Z,1492144981.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:02.217Z,1492144982.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:02.278Z,1492144982.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:02.625Z,1492144982.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:02.696Z,1492144982.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:03.029Z,1492144983.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:03.067Z,1492144983.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:03.423Z,1492144983.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:03.478Z,1492144983.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:03.821Z,1492144983.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:03.842Z,1492144983.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:04.283Z,1492144984.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:04.338Z,1492144984.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:04.626Z,1492144984.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:04.674Z,1492144984.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:05.027Z,1492144985.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:05.090Z,1492144985.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:05.430Z,1492144985.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:05.452Z,1492144985.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:05.825Z,1492144985.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:05.840Z,1492144985.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:06.250Z,1492144986.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:06.308Z,1492144986.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:06.618Z,1492144986.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:06.666Z,1492144986.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:07.025Z,1492144987.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:07.063Z,1492144987.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:07.425Z,1492144987.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:07.457Z,1492144987.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:07.817Z,1492144987.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:07.832Z,1492144987.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:08.264Z,1492144988.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:08.280Z,1492144988.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:08.629Z,1492144988.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:08.669Z,1492144988.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:09.061Z,1492144989.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:09.073Z,1492144989.073 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T04:43:09.098Z,1492144989.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:09.425Z,1492144989.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:09.477Z,1492144989.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:09.885Z,1492144989.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:09.901Z,1492144989.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:15.076Z,1492144995.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:15.388Z,1492144995.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:15.418Z,1492144995.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:15.589Z,1492144995.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:15.613Z,1492144995.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:15.872Z,1492144995.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:15.993Z,1492144995.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:16.106Z,1492144996.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:16.374Z,1492144996.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:16.389Z,1492144996.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:16.770Z,1492144996.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:16.815Z,1492144996.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:17.162Z,1492144997.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:17.250Z,1492144997.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:17.565Z,1492144997.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:17.597Z,1492144997.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:17.955Z,1492144997.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:17.995Z,1492144997.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:18.361Z,1492144998.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:18.438Z,1492144998.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:18.770Z,1492144998.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:18.797Z,1492144998.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:19.165Z,1492144999.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:19.193Z,1492144999.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:19.569Z,1492144999.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:19.614Z,1492144999.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:19.961Z,1492144999.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:19.998Z,1492144999.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:20.377Z,1492145000.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:20.394Z,1492145000.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:20.777Z,1492145000.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:20.799Z,1492145000.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:21.158Z,1492145001.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:21.193Z,1492145001.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:21.561Z,1492145001.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:21.594Z,1492145001.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:21.977Z,1492145001.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:21.993Z,1492145001.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:22.361Z,1492145002.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:22.388Z,1492145002.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:22.758Z,1492145002.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:22.794Z,1492145002.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:23.178Z,1492145003.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:23.198Z,1492145003.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:23.561Z,1492145003.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:23.594Z,1492145003.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:23.958Z,1492145003.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:23.982Z,1492145003.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:24.362Z,1492145004.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:24.391Z,1492145004.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:24.763Z,1492145004.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:24.814Z,1492145004.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:25.167Z,1492145005.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:25.184Z,1492145005.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:25.574Z,1492145005.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:25.590Z,1492145005.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:25.965Z,1492145005.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:25.989Z,1492145005.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:26.364Z,1492145006.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:26.401Z,1492145006.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:26.763Z,1492145006.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:26.812Z,1492145006.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:27.163Z,1492145007.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:27.211Z,1492145007.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:27.561Z,1492145007.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:27.602Z,1492145007.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:27.964Z,1492145007.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:28.010Z,1492145008.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:28.390Z,1492145008.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:28.408Z,1492145008.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:28.780Z,1492145008.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:28.834Z,1492145008.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:29.169Z,1492145009.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:29.221Z,1492145009.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:29.570Z,1492145009.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:29.586Z,1492145009.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:29.973Z,1492145009.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:30.029Z,1492145010.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:30.370Z,1492145010.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:30.387Z,1492145010.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:30.769Z,1492145010.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:30.826Z,1492145010.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:31.175Z,1492145011.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:31.241Z,1492145011.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:31.570Z,1492145011.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:31.591Z,1492145011.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:31.985Z,1492145011.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:32.050Z,1492145012.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:32.366Z,1492145012.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:32.386Z,1492145012.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:32.773Z,1492145012.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:32.789Z,1492145012.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:33.170Z,1492145013.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:33.185Z,1492145013.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:33.569Z,1492145013.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:33.585Z,1492145013.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:33.973Z,1492145013.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:33.988Z,1492145013.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:34.361Z,1492145014.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:34.398Z,1492145014.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:34.775Z,1492145014.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:34.791Z,1492145014.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:35.165Z,1492145015.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:35.191Z,1492145015.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:35.565Z,1492145015.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:35.591Z,1492145015.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:35.955Z,1492145015.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:35.979Z,1492145015.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:36.361Z,1492145016.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:36.393Z,1492145016.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:36.769Z,1492145016.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:36.822Z,1492145016.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:37.162Z,1492145017.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:37.177Z,1492145017.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:37.573Z,1492145017.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:37.588Z,1492145017.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:37.966Z,1492145017.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:37.981Z,1492145017.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:38.369Z,1492145018.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:38.390Z,1492145018.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:38.775Z,1492145018.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:38.802Z,1492145018.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:39.172Z,1492145019.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:39.188Z,1492145019.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:39.573Z,1492145019.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:39.598Z,1492145019.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:39.968Z,1492145019.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:39.988Z,1492145019.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:40.361Z,1492145020.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:40.387Z,1492145020.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:40.777Z,1492145020.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:40.793Z,1492145020.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:41.161Z,1492145021.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:41.195Z,1492145021.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:41.590Z,1492145021.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:41.654Z,1492145021.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:41.961Z,1492145021.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:41.994Z,1492145021.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:42.361Z,1492145022.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:42.415Z,1492145022.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:42.473Z,1492145022.473 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:42.473Z,1492145022.473 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:43:42.474Z,1492145022.474 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:43:42.521Z,1492145022.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:43:42.778Z,1492145022.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:42.818Z,1492145022.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:42.837Z,1492145022.837 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:43:42.837Z,1492145022.837 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:43:43.165Z,1492145023.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:43.188Z,1492145023.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:43.195Z,1492145023.195 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:43:43.195Z,1492145023.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:43:43.196Z,1492145023.196 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:43:43.569Z,1492145023.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:43.622Z,1492145023.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:43.972Z,1492145023.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:43.987Z,1492145023.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:44.370Z,1492145024.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:44.476Z,1492145024.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:44.765Z,1492145024.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:44.847Z,1492145024.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:45.161Z,1492145025.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:45.187Z,1492145025.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:45.562Z,1492145025.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:45.578Z,1492145025.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:45.972Z,1492145025.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:45.988Z,1492145025.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:46.377Z,1492145026.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:46.393Z,1492145026.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:46.774Z,1492145026.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:46.794Z,1492145026.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:47.169Z,1492145027.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:47.185Z,1492145027.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:47.570Z,1492145027.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:47.585Z,1492145027.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:47.961Z,1492145027.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:47.988Z,1492145027.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:48.361Z,1492145028.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:48.395Z,1492145028.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:48.761Z,1492145028.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:48.788Z,1492145028.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:49.183Z,1492145029.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:49.198Z,1492145029.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:49.561Z,1492145029.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:49.594Z,1492145029.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:49.966Z,1492145029.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:49.992Z,1492145029.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:50.361Z,1492145030.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:50.393Z,1492145030.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:50.766Z,1492145030.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:50.798Z,1492145030.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:51.166Z,1492145031.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:51.198Z,1492145031.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:51.568Z,1492145031.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:51.584Z,1492145031.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:51.970Z,1492145031.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:51.986Z,1492145031.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:52.362Z,1492145032.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:52.383Z,1492145032.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:52.765Z,1492145032.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:52.796Z,1492145032.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:53.161Z,1492145033.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:53.199Z,1492145033.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:53.579Z,1492145033.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:53.613Z,1492145033.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:53.961Z,1492145033.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:53.990Z,1492145033.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:54.361Z,1492145034.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:54.390Z,1492145034.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:54.778Z,1492145034.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:54.795Z,1492145034.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:55.161Z,1492145035.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:55.222Z,1492145035.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:55.562Z,1492145035.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:55.590Z,1492145035.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:55.963Z,1492145035.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:56.026Z,1492145036.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:56.361Z,1492145036.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:56.377Z,1492145036.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:56.764Z,1492145036.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:43:56.839Z,1492145036.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:57.226Z,1492145037.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:57.624Z,1492145037.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:58.023Z,1492145038.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:58.483Z,1492145038.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:58.796Z,1492145038.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:59.190Z,1492145039.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:59.636Z,1492145039.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:43:59.994Z,1492145039.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:00.392Z,1492145040.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:00.804Z,1492145040.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:01.188Z,1492145041.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:01.597Z,1492145041.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:01.997Z,1492145041.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:02.385Z,1492145042.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:02.819Z,1492145042.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:03.191Z,1492145043.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:03.590Z,1492145043.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:04.031Z,1492145044.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:04.394Z,1492145044.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:04.794Z,1492145044.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:05.190Z,1492145045.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:05.589Z,1492145045.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:05.986Z,1492145045.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:06.400Z,1492145046.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:06.803Z,1492145046.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:07.189Z,1492145047.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:07.610Z,1492145047.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:08.006Z,1492145048.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:08.418Z,1492145048.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:08.799Z,1492145048.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:09.278Z,1492145049.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:09.587Z,1492145049.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:10.014Z,1492145050.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:13.603Z,1492145053.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:13.749Z,1492145053.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:14.206Z,1492145054.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:14.554Z,1492145054.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:14.909Z,1492145054.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:15.309Z,1492145055.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:15.710Z,1492145055.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:16.178Z,1492145056.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:16.514Z,1492145056.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:16.914Z,1492145056.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:17.315Z,1492145057.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:17.717Z,1492145057.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:18.140Z,1492145058.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:18.186Z,1492145058.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:18.483Z,1492145058.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:18.499Z,1492145058.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:18.894Z,1492145058.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:18.939Z,1492145058.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:19.287Z,1492145059.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:19.302Z,1492145059.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:19.688Z,1492145059.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:19.704Z,1492145059.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:20.129Z,1492145060.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:20.155Z,1492145060.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:20.485Z,1492145060.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:20.511Z,1492145060.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:20.911Z,1492145060.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:20.951Z,1492145060.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:21.290Z,1492145061.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:21.307Z,1492145061.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:21.690Z,1492145061.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:21.706Z,1492145061.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:22.081Z,1492145062.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:22.185Z,1492145062.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:22.493Z,1492145062.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:22.542Z,1492145062.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:22.889Z,1492145062.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:22.910Z,1492145062.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:23.289Z,1492145063.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:23.305Z,1492145063.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:23.688Z,1492145063.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:23.704Z,1492145063.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:24.089Z,1492145064.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:24.106Z,1492145064.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:24.490Z,1492145064.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:24.522Z,1492145064.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:24.901Z,1492145064.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:24.917Z,1492145064.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:25.292Z,1492145065.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:25.331Z,1492145065.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:25.681Z,1492145065.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:25.723Z,1492145065.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:26.104Z,1492145066.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:26.133Z,1492145066.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:26.482Z,1492145066.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:26.546Z,1492145066.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:26.890Z,1492145066.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:26.927Z,1492145066.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:27.289Z,1492145067.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:27.338Z,1492145067.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:27.689Z,1492145067.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:27.728Z,1492145067.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:28.134Z,1492145068.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:28.190Z,1492145068.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:28.486Z,1492145068.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:28.535Z,1492145068.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:28.890Z,1492145068.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:28.947Z,1492145068.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:29.286Z,1492145069.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:29.302Z,1492145069.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:29.693Z,1492145069.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:29.709Z,1492145069.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:30.130Z,1492145070.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:30.159Z,1492145070.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:30.490Z,1492145070.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:30.537Z,1492145070.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:30.889Z,1492145070.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:30.907Z,1492145070.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:31.289Z,1492145071.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:31.305Z,1492145071.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:31.689Z,1492145071.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:31.705Z,1492145071.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:32.124Z,1492145072.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:32.164Z,1492145072.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:32.497Z,1492145072.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:32.527Z,1492145072.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:32.881Z,1492145072.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:32.910Z,1492145072.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:33.297Z,1492145073.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:33.319Z,1492145073.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:33.756Z,1492145073.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:33.855Z,1492145073.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:34.188Z,1492145074.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:34.232Z,1492145074.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:34.505Z,1492145074.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:34.556Z,1492145074.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:34.888Z,1492145074.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:34.931Z,1492145074.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:35.281Z,1492145075.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:35.325Z,1492145075.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:35.686Z,1492145075.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:35.706Z,1492145075.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:36.199Z,1492145076.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:36.556Z,1492145076.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:36.914Z,1492145076.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:37.281Z,1492145077.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:37.335Z,1492145077.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:37.690Z,1492145077.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:37.706Z,1492145077.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:38.091Z,1492145078.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:38.113Z,1492145078.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:38.498Z,1492145078.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:38.513Z,1492145078.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:38.906Z,1492145078.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:38.948Z,1492145078.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:39.296Z,1492145079.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:39.317Z,1492145079.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:39.693Z,1492145079.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:39.717Z,1492145079.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:40.094Z,1492145080.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:40.147Z,1492145080.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:40.487Z,1492145080.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:40.569Z,1492145080.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:40.926Z,1492145080.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:41.315Z,1492145081.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:41.747Z,1492145081.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:42.110Z,1492145082.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:42.161Z,1492145082.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:42.494Z,1492145082.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:42.561Z,1492145082.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:42.912Z,1492145082.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:42.920Z,1492145082.920 [PNI_TCM](ERROR): CRC does not match. Expected:0x5497 got:0x31618
2017-04-14T04:44:42.967Z,1492145082.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:43.292Z,1492145083.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:43.321Z,1492145083.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:43.681Z,1492145083.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:43.717Z,1492145083.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:44.129Z,1492145084.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:44.159Z,1492145084.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:44.509Z,1492145084.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:44.568Z,1492145084.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:44.892Z,1492145084.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:44.934Z,1492145084.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:45.338Z,1492145085.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:44:45.405Z,1492145085.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:45.782Z,1492145085.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:46.141Z,1492145086.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:46.569Z,1492145086.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:46.921Z,1492145086.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:47.316Z,1492145087.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:47.718Z,1492145087.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:48.209Z,1492145088.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:48.555Z,1492145088.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:48.932Z,1492145088.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:49.336Z,1492145089.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:49.774Z,1492145089.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:50.215Z,1492145090.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:50.542Z,1492145090.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:50.944Z,1492145090.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:51.333Z,1492145091.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:51.719Z,1492145091.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:52.110Z,1492145092.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:52.110Z,1492145092.110 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:44:52.110Z,1492145092.110 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:44:52.117Z,1492145092.117 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:52.117Z,1492145092.117 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:44:52.117Z,1492145092.117 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:44:52.150Z,1492145092.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:44:52.150Z,1492145092.150 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:44:52.548Z,1492145092.548 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:44:52.548Z,1492145092.548 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:44:52.549Z,1492145092.549 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:44:52.549Z,1492145092.549 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:44:52.929Z,1492145092.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:44:52.929Z,1492145092.929 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:44:52.930Z,1492145092.930 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:44:52.934Z,1492145092.934 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:44:52.959Z,1492145092.959 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:44:52.960Z,1492145092.960 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:44:53.313Z,1492145093.313 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-04-14T04:44:53.342Z,1492145093.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:53.726Z,1492145093.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:54.126Z,1492145094.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:54.528Z,1492145094.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:54.950Z,1492145094.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:55.353Z,1492145095.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:55.714Z,1492145095.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:56.146Z,1492145096.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:56.516Z,1492145096.516 [PNI_TCM](ERROR): CRC does not match. Expected:0x38769 got:0x6593
2017-04-14T04:44:56.553Z,1492145096.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:56.954Z,1492145096.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:57.331Z,1492145097.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:57.738Z,1492145097.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:58.145Z,1492145098.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:58.525Z,1492145098.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:58.918Z,1492145098.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:59.331Z,1492145099.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:44:59.728Z,1492145099.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:00.128Z,1492145100.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:00.514Z,1492145100.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:00.911Z,1492145100.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:01.305Z,1492145101.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:01.733Z,1492145101.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:02.119Z,1492145102.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:02.546Z,1492145102.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:02.914Z,1492145102.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:03.365Z,1492145103.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:03.734Z,1492145103.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:04.164Z,1492145104.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:04.515Z,1492145104.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:04.945Z,1492145104.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:05.322Z,1492145105.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:05.720Z,1492145105.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:06.119Z,1492145106.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:06.521Z,1492145106.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:06.913Z,1492145106.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:07.349Z,1492145107.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:07.714Z,1492145107.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:08.125Z,1492145108.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:08.539Z,1492145108.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:08.930Z,1492145108.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:09.341Z,1492145109.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:09.739Z,1492145109.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:10.102Z,1492145110.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:14.487Z,1492145114.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:14.803Z,1492145114.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:15.161Z,1492145115.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:15.711Z,1492145115.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:16.118Z,1492145116.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:16.405Z,1492145116.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:16.766Z,1492145116.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:17.178Z,1492145117.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:17.612Z,1492145117.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:18.087Z,1492145118.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:18.369Z,1492145118.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:18.836Z,1492145118.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:19.150Z,1492145119.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:19.553Z,1492145119.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:19.957Z,1492145119.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:20.428Z,1492145120.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:20.786Z,1492145120.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:21.184Z,1492145121.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:21.581Z,1492145121.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:21.959Z,1492145121.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:22.424Z,1492145122.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:22.781Z,1492145122.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:23.183Z,1492145123.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:23.563Z,1492145123.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:24.055Z,1492145124.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:24.356Z,1492145124.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:24.752Z,1492145124.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:25.148Z,1492145125.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:25.562Z,1492145125.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:26.052Z,1492145126.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:26.383Z,1492145126.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:26.772Z,1492145126.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:27.201Z,1492145127.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:27.601Z,1492145127.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:28.071Z,1492145128.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:28.350Z,1492145128.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:28.748Z,1492145128.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:29.189Z,1492145129.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:29.555Z,1492145129.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:30.072Z,1492145130.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:30.406Z,1492145130.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:30.771Z,1492145130.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:31.142Z,1492145131.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:31.548Z,1492145131.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:32.213Z,1492145132.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:32.576Z,1492145132.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:32.884Z,1492145132.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:33.280Z,1492145133.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:33.717Z,1492145133.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:34.061Z,1492145134.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:34.486Z,1492145134.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:34.886Z,1492145134.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:35.240Z,1492145135.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:35.629Z,1492145135.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:35.995Z,1492145135.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:36.448Z,1492145136.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:36.841Z,1492145136.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:37.226Z,1492145137.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:37.603Z,1492145137.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:38.044Z,1492145138.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:38.406Z,1492145138.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:38.796Z,1492145138.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:39.212Z,1492145139.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:39.599Z,1492145139.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:40.063Z,1492145140.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:40.426Z,1492145140.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:40.819Z,1492145140.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:41.230Z,1492145141.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:41.609Z,1492145141.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:42.082Z,1492145142.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:42.426Z,1492145142.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:42.906Z,1492145142.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:43.219Z,1492145143.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:43.678Z,1492145143.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:44.074Z,1492145144.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:44.429Z,1492145144.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:44.828Z,1492145144.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:45.199Z,1492145145.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:45.602Z,1492145145.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:46.063Z,1492145146.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:46.412Z,1492145146.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:46.815Z,1492145146.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:47.212Z,1492145147.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:47.303Z,1492145147.303 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:47.620Z,1492145147.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:48.100Z,1492145148.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:48.129Z,1492145148.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:48.556Z,1492145148.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:48.975Z,1492145148.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:49.421Z,1492145149.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:49.703Z,1492145149.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:50.058Z,1492145150.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:50.468Z,1492145150.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:50.831Z,1492145150.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:51.332Z,1492145151.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:51.682Z,1492145151.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:52.172Z,1492145152.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:52.438Z,1492145152.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:52.858Z,1492145152.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:53.237Z,1492145153.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:53.640Z,1492145153.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:54.042Z,1492145154.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:54.416Z,1492145154.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:54.845Z,1492145154.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:55.200Z,1492145155.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:55.227Z,1492145155.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:55.602Z,1492145155.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:55.622Z,1492145155.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:56.005Z,1492145156.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:56.028Z,1492145156.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:56.408Z,1492145156.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:56.461Z,1492145156.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:56.784Z,1492145156.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:56.866Z,1492145156.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:57.188Z,1492145157.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:57.244Z,1492145157.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:57.602Z,1492145157.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:57.629Z,1492145157.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:57.994Z,1492145157.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:58.046Z,1492145158.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:58.392Z,1492145158.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:45:58.450Z,1492145158.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:58.821Z,1492145158.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:59.253Z,1492145159.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:45:59.657Z,1492145159.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:00.075Z,1492145160.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:00.481Z,1492145160.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:00.816Z,1492145160.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:01.228Z,1492145161.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:01.628Z,1492145161.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:02.022Z,1492145162.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:02.429Z,1492145162.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:02.837Z,1492145162.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:03.225Z,1492145163.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:03.620Z,1492145163.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:04.094Z,1492145164.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:04.504Z,1492145164.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:04.835Z,1492145164.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:05.211Z,1492145165.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:05.626Z,1492145165.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:06.096Z,1492145166.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:06.450Z,1492145166.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:06.881Z,1492145166.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:07.229Z,1492145167.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:07.614Z,1492145167.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:08.019Z,1492145168.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:08.428Z,1492145168.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:08.806Z,1492145168.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:09.213Z,1492145169.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:09.646Z,1492145169.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:10.072Z,1492145170.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:10.459Z,1492145170.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:15.389Z,1492145175.389 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T04:46:15.389Z,1492145175.389 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:46:15.389Z,1492145175.389 [BPC1](ERROR): Data Fault
2017-04-14T04:46:15.413Z,1492145175.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:15.458Z,1492145175.458 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:46:15.560Z,1492145175.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:15.953Z,1492145175.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:16.308Z,1492145176.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:16.451Z,1492145176.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:16.471Z,1492145176.471 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:46:16.471Z,1492145176.471 [BPC1] No Fault, FailCount= 1
2017-04-14T04:46:16.703Z,1492145176.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:16.792Z,1492145176.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:17.109Z,1492145177.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:17.159Z,1492145177.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:17.502Z,1492145177.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:17.518Z,1492145177.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:17.907Z,1492145177.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:17.929Z,1492145177.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:18.310Z,1492145178.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:18.375Z,1492145178.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:18.732Z,1492145178.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:18.762Z,1492145178.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:19.119Z,1492145179.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:19.134Z,1492145179.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:19.513Z,1492145179.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:19.537Z,1492145179.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:19.948Z,1492145179.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:20.010Z,1492145180.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:20.314Z,1492145180.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:20.355Z,1492145180.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:20.697Z,1492145180.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:20.724Z,1492145180.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:21.097Z,1492145181.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:21.130Z,1492145181.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:21.518Z,1492145181.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:21.540Z,1492145181.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:21.973Z,1492145181.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:22.008Z,1492145182.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:22.297Z,1492145182.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:22.335Z,1492145182.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:22.705Z,1492145182.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:22.732Z,1492145182.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:23.137Z,1492145183.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:23.160Z,1492145183.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:23.506Z,1492145183.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:23.521Z,1492145183.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:24.012Z,1492145184.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:24.070Z,1492145184.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:24.315Z,1492145184.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:24.363Z,1492145184.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:24.697Z,1492145184.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:24.739Z,1492145184.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:25.101Z,1492145185.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:25.145Z,1492145185.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:25.506Z,1492145185.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:25.550Z,1492145185.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:25.961Z,1492145185.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:26.002Z,1492145186.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:26.313Z,1492145186.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:26.354Z,1492145186.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:26.709Z,1492145186.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:26.725Z,1492145186.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:27.106Z,1492145187.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:27.122Z,1492145187.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:27.506Z,1492145187.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:27.522Z,1492145187.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:27.968Z,1492145187.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:28.018Z,1492145188.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:28.301Z,1492145188.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:28.389Z,1492145188.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:28.711Z,1492145188.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:28.728Z,1492145188.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:29.111Z,1492145189.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:29.217Z,1492145189.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:29.505Z,1492145189.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:29.520Z,1492145189.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:29.908Z,1492145189.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:29.931Z,1492145189.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:30.313Z,1492145190.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:30.380Z,1492145190.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:30.697Z,1492145190.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:30.733Z,1492145190.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:31.098Z,1492145191.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:31.154Z,1492145191.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:31.515Z,1492145191.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:31.578Z,1492145191.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:31.901Z,1492145191.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:31.928Z,1492145191.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:32.297Z,1492145192.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:32.337Z,1492145192.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:32.722Z,1492145192.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:32.745Z,1492145192.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:33.098Z,1492145193.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:33.118Z,1492145193.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:33.506Z,1492145193.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:33.534Z,1492145193.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:33.950Z,1492145193.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:34.058Z,1492145194.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:34.299Z,1492145194.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:34.366Z,1492145194.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:34.710Z,1492145194.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:34.730Z,1492145194.730 [PNI_TCM](ERROR): CRC does not match. Expected:0x11998 got:0x44060
2017-04-14T04:46:34.839Z,1492145194.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:35.124Z,1492145195.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:35.223Z,1492145195.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:35.507Z,1492145195.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:35.522Z,1492145195.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:35.956Z,1492145195.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:36.026Z,1492145196.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:36.373Z,1492145196.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:36.422Z,1492145196.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:36.707Z,1492145196.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:36.738Z,1492145196.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:37.100Z,1492145197.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:37.133Z,1492145197.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:37.561Z,1492145197.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:37.717Z,1492145197.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:38.031Z,1492145198.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:38.122Z,1492145198.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:38.358Z,1492145198.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:38.428Z,1492145198.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:38.744Z,1492145198.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:38.795Z,1492145198.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:39.154Z,1492145199.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:39.230Z,1492145199.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:39.562Z,1492145199.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:39.615Z,1492145199.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:39.967Z,1492145199.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:40.060Z,1492145200.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:40.379Z,1492145200.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:40.419Z,1492145200.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:40.742Z,1492145200.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:40.770Z,1492145200.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:41.141Z,1492145201.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:41.167Z,1492145201.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:41.541Z,1492145201.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:41.573Z,1492145201.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:41.986Z,1492145201.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:42.024Z,1492145202.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:42.349Z,1492145202.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:42.394Z,1492145202.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:42.751Z,1492145202.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:42.768Z,1492145202.768 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T04:46:42.768Z,1492145202.768 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:46:42.768Z,1492145202.769 [BPC1](ERROR): Data Fault
2017-04-14T04:46:42.777Z,1492145202.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:42.796Z,1492145202.796 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:46:43.140Z,1492145203.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:43.171Z,1492145203.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:43.548Z,1492145203.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:43.586Z,1492145203.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:43.593Z,1492145203.593 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:43.593Z,1492145203.593 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:46:43.593Z,1492145203.593 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:46:43.607Z,1492145203.607 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:46:43.946Z,1492145203.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:44.001Z,1492145204.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:44.051Z,1492145204.050 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:46:44.051Z,1492145204.051 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:46:44.051Z,1492145204.051 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:46:44.052Z,1492145204.052 [BPC1] No Fault, FailCount= 1
2017-04-14T04:46:44.349Z,1492145204.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:44.464Z,1492145204.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:44.470Z,1492145204.470 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:46:44.470Z,1492145204.470 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:46:44.470Z,1492145204.470 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:46:44.754Z,1492145204.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:44.818Z,1492145204.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:45.151Z,1492145205.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:45.245Z,1492145205.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:45.547Z,1492145205.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:45.569Z,1492145205.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:45.951Z,1492145205.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:45.974Z,1492145205.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:46.362Z,1492145206.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:46.380Z,1492145206.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:46.751Z,1492145206.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:46.768Z,1492145206.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:47.155Z,1492145207.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:47.178Z,1492145207.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:47.538Z,1492145207.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:47.565Z,1492145207.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:47.942Z,1492145207.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:47.969Z,1492145207.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:48.354Z,1492145208.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:48.370Z,1492145208.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:48.741Z,1492145208.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:48.770Z,1492145208.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:49.135Z,1492145209.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:49.174Z,1492145209.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:49.547Z,1492145209.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:49.574Z,1492145209.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:49.942Z,1492145209.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:49.977Z,1492145209.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:50.347Z,1492145210.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:50.364Z,1492145210.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:50.748Z,1492145210.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:50.770Z,1492145210.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:51.161Z,1492145211.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:51.203Z,1492145211.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:51.548Z,1492145211.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:51.566Z,1492145211.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:51.948Z,1492145211.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:51.978Z,1492145211.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:52.347Z,1492145212.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:52.371Z,1492145212.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:52.751Z,1492145212.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:52.769Z,1492145212.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:53.149Z,1492145213.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:53.232Z,1492145213.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:53.546Z,1492145213.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:53.561Z,1492145213.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:53.989Z,1492145213.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:54.005Z,1492145214.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:54.350Z,1492145214.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:54.383Z,1492145214.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:54.750Z,1492145214.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:54.765Z,1492145214.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:55.149Z,1492145215.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:55.165Z,1492145215.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:55.580Z,1492145215.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:55.625Z,1492145215.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:55.947Z,1492145215.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:55.987Z,1492145215.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:56.368Z,1492145216.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:56.455Z,1492145216.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:56.746Z,1492145216.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:56.837Z,1492145216.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:57.139Z,1492145217.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:57.170Z,1492145217.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:57.553Z,1492145217.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:57.609Z,1492145217.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:57.981Z,1492145217.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:58.021Z,1492145218.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:58.448Z,1492145218.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:58.576Z,1492145218.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:58.799Z,1492145218.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:58.870Z,1492145218.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:59.147Z,1492145219.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:59.222Z,1492145219.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:59.548Z,1492145219.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:59.589Z,1492145219.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:46:59.953Z,1492145219.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:46:59.989Z,1492145219.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:00.358Z,1492145220.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:00.374Z,1492145220.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:00.753Z,1492145220.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:00.798Z,1492145220.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:01.198Z,1492145221.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:01.226Z,1492145221.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:01.555Z,1492145221.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:01.580Z,1492145221.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:01.983Z,1492145221.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:02.121Z,1492145222.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:02.357Z,1492145222.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:02.383Z,1492145222.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:02.760Z,1492145222.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:02.793Z,1492145222.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:03.145Z,1492145223.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:03.181Z,1492145223.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:03.545Z,1492145223.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:03.577Z,1492145223.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:03.944Z,1492145223.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:03.960Z,1492145223.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:04.358Z,1492145224.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:04.393Z,1492145224.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:04.752Z,1492145224.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:04.769Z,1492145224.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:05.194Z,1492145225.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:05.247Z,1492145225.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:05.552Z,1492145225.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:05.567Z,1492145225.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:05.957Z,1492145225.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:05.978Z,1492145225.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:06.349Z,1492145226.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:06.371Z,1492145226.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:06.755Z,1492145226.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:06.805Z,1492145226.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:07.147Z,1492145227.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:07.191Z,1492145227.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:07.553Z,1492145227.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:07.574Z,1492145227.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:07.953Z,1492145227.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:07.975Z,1492145227.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:08.375Z,1492145228.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:08.436Z,1492145228.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:08.788Z,1492145228.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:08.849Z,1492145228.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:09.147Z,1492145229.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:09.163Z,1492145229.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:09.596Z,1492145229.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:09.625Z,1492145229.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:09.965Z,1492145229.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:10.148Z,1492145230.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:10.197Z,1492145230.197 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:47:10.197Z,1492145230.197 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:47:10.197Z,1492145230.197 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:47:10.197Z,1492145230.197 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:47:10.396Z,1492145230.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:10.530Z,1492145230.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:10.578Z,1492145230.578 [Default:CheckIn:D] Stopped
2017-04-14T04:47:10.578Z,1492145230.578 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:47:10.764Z,1492145230.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:10.974Z,1492145230.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:11.044Z,1492145231.044 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 81.087655 min 
2017-04-14T04:47:11.080Z,1492145231.080 [Default:CheckIn:E] Stopped
2017-04-14T04:47:11.080Z,1492145231.080 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:47:11.080Z,1492145231.080 [Default:CheckIn] Stopped
2017-04-14T04:47:11.081Z,1492145231.081 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:47:11.081Z,1492145231.081 [Default:CheckIn](INFO): Running loop #13
2017-04-14T04:47:11.081Z,1492145231.081 [Default:CheckIn] Running Loop=13
2017-04-14T04:47:11.081Z,1492145231.081 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:47:11.081Z,1492145231.081 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:47:19.064Z,1492145239.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:19.095Z,1492145239.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:19.196Z,1492145239.196 [NAL9602](INFO): Powering up
2017-04-14T04:47:19.213Z,1492145239.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:19.286Z,1492145239.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:19.556Z,1492145239.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:19.572Z,1492145239.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:19.991Z,1492145239.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:20.065Z,1492145240.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:20.363Z,1492145240.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:20.422Z,1492145240.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:20.756Z,1492145240.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:20.807Z,1492145240.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:21.174Z,1492145241.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:21.194Z,1492145241.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:21.561Z,1492145241.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:21.581Z,1492145241.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:21.967Z,1492145241.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:21.992Z,1492145241.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:22.388Z,1492145242.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:22.447Z,1492145242.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:22.753Z,1492145242.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:22.780Z,1492145242.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:23.153Z,1492145243.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:23.170Z,1492145243.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:23.555Z,1492145243.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:23.571Z,1492145243.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:23.954Z,1492145243.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:23.975Z,1492145243.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:24.358Z,1492145244.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:24.378Z,1492145244.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:24.759Z,1492145244.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:24.775Z,1492145244.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:25.160Z,1492145245.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:25.176Z,1492145245.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:25.178Z,1492145245.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:25.564Z,1492145245.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:25.581Z,1492145245.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:25.962Z,1492145245.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:25.972Z,1492145245.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:25.979Z,1492145245.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:26.350Z,1492145246.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:26.380Z,1492145246.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:26.580Z,1492145246.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:26.773Z,1492145246.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:26.798Z,1492145246.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:27.149Z,1492145247.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:27.170Z,1492145247.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:27.376Z,1492145247.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:27.562Z,1492145247.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:27.577Z,1492145247.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:28.002Z,1492145248.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:28.074Z,1492145248.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:28.359Z,1492145248.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:28.412Z,1492145248.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:28.760Z,1492145248.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:28.829Z,1492145248.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:29.160Z,1492145249.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:29.176Z,1492145249.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:29.551Z,1492145249.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:29.569Z,1492145249.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:29.968Z,1492145249.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:30.020Z,1492145250.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:30.333Z,1492145250.333 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:47:30.355Z,1492145250.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:30.439Z,1492145250.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:30.763Z,1492145250.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:30.820Z,1492145250.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:31.172Z,1492145251.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:31.189Z,1492145251.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:31.602Z,1492145251.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:31.711Z,1492145251.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:32.000Z,1492145252.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:32.105Z,1492145252.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:32.374Z,1492145252.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:32.518Z,1492145252.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:32.765Z,1492145252.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:32.806Z,1492145252.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:33.161Z,1492145253.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:33.246Z,1492145253.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:33.555Z,1492145253.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:33.620Z,1492145253.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:33.964Z,1492145253.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:34.060Z,1492145254.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:34.352Z,1492145254.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:34.426Z,1492145254.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:34.749Z,1492145254.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:34.782Z,1492145254.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:35.151Z,1492145255.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:35.170Z,1492145255.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:35.589Z,1492145255.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:35.614Z,1492145255.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:35.960Z,1492145255.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:35.978Z,1492145255.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:36.366Z,1492145256.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:36.386Z,1492145256.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:36.758Z,1492145256.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:36.777Z,1492145256.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:37.168Z,1492145257.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:37.185Z,1492145257.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:37.556Z,1492145257.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:37.584Z,1492145257.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:37.963Z,1492145257.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:37.986Z,1492145257.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:38.396Z,1492145258.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:38.435Z,1492145258.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:38.750Z,1492145258.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:38.766Z,1492145258.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:39.155Z,1492145259.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:39.193Z,1492145259.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:39.557Z,1492145259.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:39.593Z,1492145259.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:39.953Z,1492145259.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:39.974Z,1492145259.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:40.351Z,1492145260.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:40.387Z,1492145260.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:40.753Z,1492145260.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:40.789Z,1492145260.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:41.138Z,1492145261.138 [NAL9602](INFO): SBD MO Status=0, MOMSN=2106, MT Status=0, MTMSN=0
2017-04-14T04:47:41.138Z,1492145261.138 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:47:41.155Z,1492145261.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:41.203Z,1492145261.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:41.559Z,1492145261.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:41.594Z,1492145261.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:41.985Z,1492145261.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:42.001Z,1492145262.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:42.366Z,1492145262.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:42.383Z,1492145262.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:42.767Z,1492145262.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:42.782Z,1492145262.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:43.162Z,1492145263.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:43.179Z,1492145263.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:43.572Z,1492145263.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:43.597Z,1492145263.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:43.970Z,1492145263.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:43.986Z,1492145263.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:44.375Z,1492145264.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:44.423Z,1492145264.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:44.776Z,1492145264.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:44.806Z,1492145264.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:45.169Z,1492145265.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:45.208Z,1492145265.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:45.577Z,1492145265.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:45.595Z,1492145265.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:46.001Z,1492145266.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:46.010Z,1492145266.010 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T04:47:46.010Z,1492145266.010 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:47:46.010Z,1492145266.010 [BPC1](ERROR): Data Fault
2017-04-14T04:47:46.070Z,1492145266.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:46.189Z,1492145266.188 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:47:46.413Z,1492145266.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:46.504Z,1492145266.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:46.782Z,1492145266.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:46.860Z,1492145266.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:47.152Z,1492145267.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:47.228Z,1492145267.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:47.316Z,1492145267.316 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:47:47.316Z,1492145267.316 [BPC1] No Fault, FailCount= 1
2017-04-14T04:47:47.578Z,1492145267.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:47.793Z,1492145267.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:47.973Z,1492145267.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:48.050Z,1492145268.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:48.395Z,1492145268.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:48.424Z,1492145268.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:48.758Z,1492145268.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:48.773Z,1492145268.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:49.161Z,1492145269.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:49.182Z,1492145269.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:49.560Z,1492145269.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:49.582Z,1492145269.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:49.959Z,1492145269.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:49.982Z,1492145269.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:50.380Z,1492145270.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:50.401Z,1492145270.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:50.780Z,1492145270.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:50.828Z,1492145270.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:51.172Z,1492145271.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:51.201Z,1492145271.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:51.597Z,1492145271.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:51.638Z,1492145271.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:51.956Z,1492145271.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:51.997Z,1492145271.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:52.372Z,1492145272.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:52.399Z,1492145272.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:52.762Z,1492145272.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:52.806Z,1492145272.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:53.170Z,1492145273.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:53.200Z,1492145273.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:53.200Z,1492145273.200 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:47:53.200Z,1492145273.200 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:47:53.206Z,1492145273.207 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:53.207Z,1492145273.207 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:47:53.207Z,1492145273.207 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:47:53.223Z,1492145273.223 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:47:53.223Z,1492145273.223 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:47:53.568Z,1492145273.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:53.631Z,1492145273.631 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:47:53.631Z,1492145273.631 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:47:53.631Z,1492145273.631 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:47:53.632Z,1492145273.632 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:47:53.982Z,1492145273.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:54.013Z,1492145274.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:47:54.014Z,1492145274.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:47:54.014Z,1492145274.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:47:54.022Z,1492145274.022 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:47:54.022Z,1492145274.022 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:47:54.023Z,1492145274.023 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:47:54.361Z,1492145274.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:54.412Z,1492145274.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:54.769Z,1492145274.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:54.812Z,1492145274.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:55.192Z,1492145275.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:55.226Z,1492145275.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:55.593Z,1492145275.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:55.661Z,1492145275.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:55.970Z,1492145275.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:55.000Z,1492145276.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:56.376Z,1492145276.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:56.425Z,1492145276.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:56.766Z,1492145276.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:56.817Z,1492145276.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:57.170Z,1492145277.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:57.220Z,1492145277.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:57.604Z,1492145277.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:57.643Z,1492145277.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:57.973Z,1492145277.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:58.015Z,1492145278.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:58.362Z,1492145278.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:58.412Z,1492145278.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:58.769Z,1492145278.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:58.790Z,1492145278.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:59.166Z,1492145279.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:59.209Z,1492145279.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:59.565Z,1492145279.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:47:59.604Z,1492145279.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:47:59.965Z,1492145279.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:00.003Z,1492145280.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:00.365Z,1492145280.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:00.425Z,1492145280.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:00.770Z,1492145280.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:00.818Z,1492145280.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:01.169Z,1492145281.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:01.222Z,1492145281.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:01.570Z,1492145281.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:01.586Z,1492145281.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:01.958Z,1492145281.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:02.017Z,1492145282.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:02.370Z,1492145282.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:02.422Z,1492145282.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:02.788Z,1492145282.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:02.859Z,1492145282.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:03.169Z,1492145283.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:03.186Z,1492145283.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:03.551Z,1492145283.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:03.588Z,1492145283.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:03.958Z,1492145283.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:03.987Z,1492145283.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:04.351Z,1492145284.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:04.384Z,1492145284.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:04.759Z,1492145284.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:04.790Z,1492145284.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:05.154Z,1492145285.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:05.184Z,1492145285.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:05.567Z,1492145285.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:05.590Z,1492145285.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:05.965Z,1492145285.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:06.018Z,1492145286.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:06.371Z,1492145286.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:06.442Z,1492145286.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:06.763Z,1492145286.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:06.778Z,1492145286.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:07.160Z,1492145287.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:07.191Z,1492145287.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:07.573Z,1492145287.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:07.594Z,1492145287.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:07.971Z,1492145287.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:07.999Z,1492145288.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:08.407Z,1492145288.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:08.468Z,1492145288.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:08.773Z,1492145288.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:08.789Z,1492145288.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:09.173Z,1492145289.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:09.203Z,1492145289.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:09.580Z,1492145289.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:09.605Z,1492145289.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:09.971Z,1492145289.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:10.096Z,1492145290.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:10.409Z,1492145290.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:10.462Z,1492145290.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:10.759Z,1492145290.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:10.808Z,1492145290.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:11.181Z,1492145291.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:11.197Z,1492145291.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:18.911Z,1492145298.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:19.036Z,1492145299.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:19.184Z,1492145299.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:19.210Z,1492145299.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:19.550Z,1492145299.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:19.589Z,1492145299.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:19.946Z,1492145299.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:19.999Z,1492145299.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:20.344Z,1492145300.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:20.382Z,1492145300.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:20.754Z,1492145300.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:20.809Z,1492145300.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:21.151Z,1492145301.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:21.246Z,1492145301.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:21.562Z,1492145301.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:21.605Z,1492145301.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:21.961Z,1492145301.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:22.098Z,1492145302.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:22.343Z,1492145302.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:22.397Z,1492145302.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:22.757Z,1492145302.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:22.798Z,1492145302.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:23.146Z,1492145303.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:23.166Z,1492145303.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:23.556Z,1492145303.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:23.578Z,1492145303.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:23.961Z,1492145303.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:23.976Z,1492145303.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:24.344Z,1492145304.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:24.380Z,1492145304.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:24.738Z,1492145304.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:24.771Z,1492145304.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:25.135Z,1492145305.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:25.163Z,1492145305.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:25.544Z,1492145305.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:25.580Z,1492145305.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:25.938Z,1492145305.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:25.965Z,1492145305.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:26.356Z,1492145306.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:26.372Z,1492145306.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:26.758Z,1492145306.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:26.774Z,1492145306.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:27.157Z,1492145307.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:27.172Z,1492145307.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:27.538Z,1492145307.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:27.566Z,1492145307.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:27.933Z,1492145307.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:27.961Z,1492145307.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:28.336Z,1492145308.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:28.374Z,1492145308.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:28.751Z,1492145308.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:28.781Z,1492145308.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:29.168Z,1492145309.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:29.192Z,1492145309.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:29.564Z,1492145309.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:29.586Z,1492145309.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:29.952Z,1492145309.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:29.970Z,1492145309.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:30.350Z,1492145310.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:30.381Z,1492145310.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:30.784Z,1492145310.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:30.851Z,1492145310.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:31.149Z,1492145311.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:31.215Z,1492145311.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:31.554Z,1492145311.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:31.577Z,1492145311.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:31.980Z,1492145311.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:32.033Z,1492145312.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:32.407Z,1492145312.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:32.429Z,1492145312.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:32.761Z,1492145312.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:32.783Z,1492145312.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:33.172Z,1492145313.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:33.188Z,1492145313.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:33.537Z,1492145313.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:33.571Z,1492145313.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:33.939Z,1492145313.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:33.970Z,1492145313.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:34.359Z,1492145314.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:34.423Z,1492145314.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:34.750Z,1492145314.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:34.894Z,1492145314.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:35.148Z,1492145315.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:35.186Z,1492145315.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:35.591Z,1492145315.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:35.630Z,1492145315.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:35.949Z,1492145315.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:36.025Z,1492145316.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:36.368Z,1492145316.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:36.433Z,1492145316.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:36.520Z,1492145316.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:36.752Z,1492145316.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:36.825Z,1492145316.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:37.147Z,1492145317.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:37.195Z,1492145317.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:37.320Z,1492145317.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:37.562Z,1492145317.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:37.606Z,1492145317.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:37.945Z,1492145317.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:37.966Z,1492145317.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:38.368Z,1492145318.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:38.384Z,1492145318.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:38.755Z,1492145318.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:38.788Z,1492145318.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:39.172Z,1492145319.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:39.198Z,1492145319.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:39.534Z,1492145319.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:39.567Z,1492145319.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:39.933Z,1492145319.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:39.974Z,1492145319.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:40.337Z,1492145320.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:40.381Z,1492145320.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:40.740Z,1492145320.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:40.772Z,1492145320.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:41.152Z,1492145321.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:41.181Z,1492145321.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:41.556Z,1492145321.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:41.582Z,1492145321.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:41.948Z,1492145321.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:41.970Z,1492145321.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:42.336Z,1492145322.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:42.397Z,1492145322.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:42.744Z,1492145322.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:42.766Z,1492145322.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:43.147Z,1492145323.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:43.164Z,1492145323.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:43.536Z,1492145323.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:43.562Z,1492145323.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:43.940Z,1492145323.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:43.964Z,1492145323.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:44.365Z,1492145324.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:44.381Z,1492145324.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:44.750Z,1492145324.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:44.790Z,1492145324.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:45.154Z,1492145325.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:45.190Z,1492145325.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:45.542Z,1492145325.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:45.565Z,1492145325.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:45.933Z,1492145325.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:45.966Z,1492145325.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:46.364Z,1492145326.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:46.381Z,1492145326.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:46.733Z,1492145326.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:46.770Z,1492145326.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:47.144Z,1492145327.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:47.178Z,1492145327.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:47.561Z,1492145327.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:47.578Z,1492145327.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:47.944Z,1492145327.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:47.965Z,1492145327.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:48.376Z,1492145328.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:48.420Z,1492145328.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:48.771Z,1492145328.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:48.839Z,1492145328.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:49.138Z,1492145329.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:49.182Z,1492145329.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:49.541Z,1492145329.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:49.557Z,1492145329.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:49.942Z,1492145329.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:50.001Z,1492145330.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:50.356Z,1492145330.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:50.406Z,1492145330.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:50.759Z,1492145330.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:50.774Z,1492145330.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:51.157Z,1492145331.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:51.202Z,1492145331.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:51.534Z,1492145331.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:51.583Z,1492145331.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:51.935Z,1492145331.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:52.039Z,1492145332.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:52.353Z,1492145332.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:52.402Z,1492145332.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:52.781Z,1492145332.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:52.845Z,1492145332.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:53.153Z,1492145333.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:53.194Z,1492145333.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:53.538Z,1492145333.538 [NAL9602](INFO): GPS fix at 20170414T044900: (36.802325, -121.786966)
2017-04-14T04:48:53.557Z,1492145333.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:53.746Z,1492145333.746 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:48:53.746Z,1492145333.746 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:48:53.953Z,1492145333.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:54.002Z,1492145334.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:54.002Z,1492145334.002 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:48:54.002Z,1492145334.002 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:48:54.010Z,1492145334.010 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:54.010Z,1492145334.010 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:48:54.010Z,1492145334.010 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:48:54.026Z,1492145334.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:48:54.026Z,1492145334.026 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:48:54.581Z,1492145334.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:54.636Z,1492145334.636 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:48:54.636Z,1492145334.636 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:48:54.637Z,1492145334.637 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:48:54.637Z,1492145334.637 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:48:54.967Z,1492145334.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:54.994Z,1492145334.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:48:54.995Z,1492145334.995 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:48:55.016Z,1492145335.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:48:55.029Z,1492145335.029 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:48:55.030Z,1492145335.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:48:55.030Z,1492145335.030 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:48:55.353Z,1492145335.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:55.387Z,1492145335.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:48:55.778Z,1492145335.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:48:55.848Z,1492145335.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:02.739Z,1492145342.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:02.789Z,1492145342.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:02.910Z,1492145342.910 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0056.lzma
2017-04-14T04:49:02.926Z,1492145342.926 [NAL9602](INFO): Powering down
2017-04-14T04:49:02.966Z,1492145342.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:03.048Z,1492145343.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:03.327Z,1492145343.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:03.364Z,1492145343.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:03.702Z,1492145343.702 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0056.lzma.bak
2017-04-14T04:49:03.702Z,1492145343.702 [DataOverHttps](INFO): SBD MOMSN=4885172
2017-04-14T04:49:03.765Z,1492145343.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:03.847Z,1492145343.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:04.255Z,1492145344.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:04.376Z,1492145344.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:04.616Z,1492145344.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:04.718Z,1492145344.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:09.342Z,1492145349.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:09.394Z,1492145349.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:09.502Z,1492145349.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:09.541Z,1492145349.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:09.857Z,1492145349.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:09.917Z,1492145349.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:10.262Z,1492145350.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:10.317Z,1492145350.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:10.658Z,1492145350.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:10.674Z,1492145350.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:11.059Z,1492145351.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:11.075Z,1492145351.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:15.578Z,1492145355.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:15.654Z,1492145355.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:15.840Z,1492145355.839 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0057.lzma
2017-04-14T04:49:15.876Z,1492145355.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:15.948Z,1492145355.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:16.213Z,1492145356.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:16.241Z,1492145356.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:16.562Z,1492145356.562 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0057.lzma.bak
2017-04-14T04:49:16.562Z,1492145356.562 [DataOverHttps](INFO): SBD MOMSN=4885176
2017-04-14T04:49:16.608Z,1492145356.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:16.624Z,1492145356.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:16.944Z,1492145356.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:17.007Z,1492145357.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:17.041Z,1492145357.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:17.049Z,1492145357.049 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:49:17.049Z,1492145357.049 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:49:17.049Z,1492145357.049 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:49:17.400Z,1492145357.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:17.437Z,1492145357.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:17.740Z,1492145357.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:21.008Z,1492145361.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:21.032Z,1492145361.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:21.133Z,1492145361.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:21.174Z,1492145361.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:21.532Z,1492145361.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:21.564Z,1492145361.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:21.939Z,1492145361.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:22.000Z,1492145362.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:22.330Z,1492145362.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:22.363Z,1492145362.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:22.766Z,1492145362.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:22.813Z,1492145362.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:23.129Z,1492145363.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:23.170Z,1492145363.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:23.533Z,1492145363.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:23.640Z,1492145363.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:23.929Z,1492145363.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:23.944Z,1492145363.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:24.337Z,1492145364.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:24.387Z,1492145364.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:24.737Z,1492145364.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:24.780Z,1492145364.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:25.137Z,1492145365.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:25.152Z,1492145365.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:25.535Z,1492145365.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:25.551Z,1492145365.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:25.929Z,1492145365.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:25.963Z,1492145365.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:26.345Z,1492145366.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:26.362Z,1492145366.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:26.745Z,1492145366.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:26.761Z,1492145366.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:27.139Z,1492145367.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:27.163Z,1492145367.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:27.652Z,1492145367.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:27.725Z,1492145367.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:27.950Z,1492145367.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:27.967Z,1492145367.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:28.346Z,1492145368.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:28.362Z,1492145368.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:28.733Z,1492145368.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:28.759Z,1492145368.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:29.129Z,1492145369.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:29.157Z,1492145369.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:29.533Z,1492145369.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:29.559Z,1492145369.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:29.933Z,1492145369.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:29.969Z,1492145369.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:30.331Z,1492145370.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:30.346Z,1492145370.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:30.737Z,1492145370.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:30.775Z,1492145370.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:31.145Z,1492145371.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:31.171Z,1492145371.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:31.570Z,1492145371.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:31.589Z,1492145371.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:32.002Z,1492145372.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:32.040Z,1492145372.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:32.339Z,1492145372.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:32.384Z,1492145372.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:32.766Z,1492145372.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:32.790Z,1492145372.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:33.197Z,1492145373.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:33.260Z,1492145373.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:33.548Z,1492145373.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:33.571Z,1492145373.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:33.978Z,1492145373.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:34.042Z,1492145374.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:34.344Z,1492145374.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:34.394Z,1492145374.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:34.729Z,1492145374.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:34.762Z,1492145374.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:35.140Z,1492145375.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:35.166Z,1492145375.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:35.529Z,1492145375.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:35.575Z,1492145375.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:35.938Z,1492145375.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:35.954Z,1492145375.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:36.337Z,1492145376.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:36.358Z,1492145376.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:36.738Z,1492145376.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:36.810Z,1492145376.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:37.141Z,1492145377.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:37.175Z,1492145377.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:37.526Z,1492145377.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:37.624Z,1492145377.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:37.941Z,1492145377.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:37.984Z,1492145377.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:38.346Z,1492145378.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:38.366Z,1492145378.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:38.743Z,1492145378.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:38.798Z,1492145378.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:39.138Z,1492145379.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:39.158Z,1492145379.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:39.561Z,1492145379.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:39.663Z,1492145379.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:39.940Z,1492145379.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:39.956Z,1492145379.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:40.346Z,1492145380.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:40.366Z,1492145380.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:40.740Z,1492145380.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:40.762Z,1492145380.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:41.143Z,1492145381.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:41.159Z,1492145381.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:41.529Z,1492145381.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:41.609Z,1492145381.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:41.946Z,1492145381.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:41.963Z,1492145381.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:42.326Z,1492145382.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:42.359Z,1492145382.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:42.729Z,1492145382.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:42.756Z,1492145382.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:43.147Z,1492145383.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:43.163Z,1492145383.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:43.530Z,1492145383.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:43.562Z,1492145383.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:43.945Z,1492145383.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:43.960Z,1492145383.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:44.370Z,1492145384.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:44.406Z,1492145384.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:44.730Z,1492145384.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:44.778Z,1492145384.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:44.814Z,1492145384.814 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:44.814Z,1492145384.814 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:49:44.814Z,1492145384.814 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:49:44.892Z,1492145384.892 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:49:45.138Z,1492145385.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:45.153Z,1492145385.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:45.192Z,1492145385.192 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:49:45.192Z,1492145385.192 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:49:45.538Z,1492145385.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:45.558Z,1492145385.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:45.564Z,1492145385.564 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:49:45.565Z,1492145385.565 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:49:45.565Z,1492145385.565 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:49:45.968Z,1492145385.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:46.005Z,1492145386.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:46.337Z,1492145386.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:46.360Z,1492145386.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:46.740Z,1492145386.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:46.771Z,1492145386.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:47.131Z,1492145387.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:47.151Z,1492145387.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:47.536Z,1492145387.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:47.568Z,1492145387.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:47.971Z,1492145387.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:48.008Z,1492145388.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:48.344Z,1492145388.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:48.366Z,1492145388.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:48.729Z,1492145388.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:48.764Z,1492145388.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:49.142Z,1492145389.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:49.168Z,1492145389.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:49.598Z,1492145389.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:49.666Z,1492145389.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:49.953Z,1492145389.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:49.991Z,1492145389.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:50.330Z,1492145390.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:50.408Z,1492145390.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:50.734Z,1492145390.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:50.743Z,1492145390.743 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T04:49:50.743Z,1492145390.743 [BPC1] Data Fault, FailCount= 1
2017-04-14T04:49:50.743Z,1492145390.743 [BPC1](ERROR): Data Fault
2017-04-14T04:49:50.752Z,1492145390.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:50.803Z,1492145390.803 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T04:49:51.137Z,1492145391.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:51.184Z,1492145391.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:51.586Z,1492145391.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:51.664Z,1492145391.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:51.926Z,1492145391.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:52.077Z,1492145392.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:52.156Z,1492145392.156 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:49:52.156Z,1492145392.156 [BPC1] No Fault, FailCount= 1
2017-04-14T04:49:52.365Z,1492145392.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:52.519Z,1492145392.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:52.733Z,1492145392.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:52.761Z,1492145392.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:53.130Z,1492145393.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:53.202Z,1492145393.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:53.639Z,1492145393.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:53.694Z,1492145393.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:53.943Z,1492145393.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:53.982Z,1492145393.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:54.350Z,1492145394.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:54.424Z,1492145394.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:54.737Z,1492145394.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:54.766Z,1492145394.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:55.146Z,1492145395.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:55.189Z,1492145395.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:55.588Z,1492145395.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:55.672Z,1492145395.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:55.932Z,1492145395.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:55.978Z,1492145395.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:56.361Z,1492145396.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:56.396Z,1492145396.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:56.795Z,1492145396.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:56.851Z,1492145396.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:57.126Z,1492145397.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:57.159Z,1492145397.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:57.537Z,1492145397.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:57.554Z,1492145397.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:57.948Z,1492145397.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:58.019Z,1492145398.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:58.358Z,1492145398.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:58.375Z,1492145398.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:58.730Z,1492145398.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:58.757Z,1492145398.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:59.131Z,1492145399.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:59.166Z,1492145399.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:59.533Z,1492145399.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:49:59.576Z,1492145399.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:49:59.944Z,1492145399.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:00.034Z,1492145400.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:00.370Z,1492145400.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:00.387Z,1492145400.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:00.751Z,1492145400.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:00.808Z,1492145400.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:01.143Z,1492145401.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:01.160Z,1492145401.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:01.538Z,1492145401.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:01.564Z,1492145401.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:01.961Z,1492145401.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:02.015Z,1492145402.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:02.331Z,1492145402.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:02.359Z,1492145402.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:02.745Z,1492145402.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:02.774Z,1492145402.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:03.129Z,1492145403.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:03.150Z,1492145403.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:03.601Z,1492145403.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:03.680Z,1492145403.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:03.938Z,1492145403.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:03.985Z,1492145403.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:04.343Z,1492145404.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:04.359Z,1492145404.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:04.733Z,1492145404.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:04.775Z,1492145404.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:05.145Z,1492145405.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:05.265Z,1492145405.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:05.587Z,1492145405.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:05.677Z,1492145405.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:05.971Z,1492145405.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:06.058Z,1492145406.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:06.346Z,1492145406.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:06.398Z,1492145406.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:06.740Z,1492145406.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:06.830Z,1492145406.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:07.129Z,1492145407.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:07.228Z,1492145407.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:07.606Z,1492145407.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:07.682Z,1492145407.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:07.934Z,1492145407.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:07.969Z,1492145407.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:08.336Z,1492145408.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:08.368Z,1492145408.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:08.731Z,1492145408.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:08.810Z,1492145408.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:09.149Z,1492145409.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:09.184Z,1492145409.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:09.594Z,1492145409.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:09.646Z,1492145409.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:09.929Z,1492145409.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:09.959Z,1492145409.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:10.338Z,1492145410.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:10.353Z,1492145410.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:10.742Z,1492145410.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:10.759Z,1492145410.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:11.142Z,1492145411.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:11.157Z,1492145411.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:11.538Z,1492145411.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:11.644Z,1492145411.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:11.939Z,1492145411.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:11.968Z,1492145411.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:12.363Z,1492145412.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:12.380Z,1492145412.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:12.727Z,1492145412.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:12.743Z,1492145412.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:13.138Z,1492145413.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:13.154Z,1492145413.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:13.538Z,1492145413.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:13.562Z,1492145413.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:13.952Z,1492145413.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:14.042Z,1492145414.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:14.342Z,1492145414.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:14.358Z,1492145414.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:14.464Z,1492145414.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:14.747Z,1492145414.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:14.767Z,1492145414.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:15.153Z,1492145415.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:15.255Z,1492145415.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:15.260Z,1492145415.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:15.574Z,1492145415.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:15.624Z,1492145415.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:15.976Z,1492145415.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:16.089Z,1492145416.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:16.336Z,1492145416.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:16.392Z,1492145416.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:16.833Z,1492145416.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:16.922Z,1492145416.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:17.186Z,1492145417.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:17.270Z,1492145417.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:17.610Z,1492145417.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:17.706Z,1492145417.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:22.488Z,1492145422.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:22.581Z,1492145422.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:22.673Z,1492145422.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:22.710Z,1492145422.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:23.063Z,1492145423.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:23.103Z,1492145423.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:23.465Z,1492145423.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:23.584Z,1492145423.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:23.857Z,1492145423.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:23.892Z,1492145423.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:24.255Z,1492145424.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:24.306Z,1492145424.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:24.683Z,1492145424.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:24.746Z,1492145424.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:25.069Z,1492145425.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:25.097Z,1492145425.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:25.461Z,1492145425.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:25.483Z,1492145425.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:25.856Z,1492145425.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:25.881Z,1492145425.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:26.272Z,1492145426.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:26.287Z,1492145426.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:26.674Z,1492145426.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:26.690Z,1492145426.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:27.053Z,1492145427.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:27.092Z,1492145427.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:27.456Z,1492145427.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:27.485Z,1492145427.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:27.912Z,1492145427.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:27.983Z,1492145427.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:28.290Z,1492145428.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:28.347Z,1492145428.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:28.664Z,1492145428.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:28.689Z,1492145428.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:29.055Z,1492145429.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:29.085Z,1492145429.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:29.453Z,1492145429.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:29.482Z,1492145429.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:29.912Z,1492145429.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:29.977Z,1492145429.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:30.259Z,1492145430.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:30.286Z,1492145430.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:30.657Z,1492145430.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:30.691Z,1492145430.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:31.058Z,1492145431.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:31.090Z,1492145431.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:31.454Z,1492145431.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:31.554Z,1492145431.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:31.870Z,1492145431.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:31.886Z,1492145431.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:32.267Z,1492145432.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:32.287Z,1492145432.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:32.654Z,1492145432.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:32.682Z,1492145432.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:33.055Z,1492145433.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:33.091Z,1492145433.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:33.453Z,1492145433.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:33.606Z,1492145433.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:33.867Z,1492145433.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:33.890Z,1492145433.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:34.255Z,1492145434.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:34.301Z,1492145434.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:34.692Z,1492145434.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:34.708Z,1492145434.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:35.054Z,1492145435.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:35.164Z,1492145435.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:35.589Z,1492145435.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:35.663Z,1492145435.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:35.957Z,1492145435.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:36.030Z,1492145436.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:36.342Z,1492145436.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:36.464Z,1492145436.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:36.774Z,1492145436.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:36.912Z,1492145436.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:37.156Z,1492145437.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:37.243Z,1492145437.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:37.688Z,1492145437.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:37.928Z,1492145437.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:38.118Z,1492145438.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:38.208Z,1492145438.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:38.472Z,1492145438.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:38.641Z,1492145438.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:38.884Z,1492145438.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:38.984Z,1492145438.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:39.267Z,1492145439.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:39.320Z,1492145439.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:39.680Z,1492145439.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:39.814Z,1492145439.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:40.074Z,1492145440.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:40.152Z,1492145440.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:40.466Z,1492145440.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:40.488Z,1492145440.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:40.896Z,1492145440.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:40.929Z,1492145440.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:41.278Z,1492145441.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:41.356Z,1492145441.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:41.668Z,1492145441.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:41.711Z,1492145441.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:42.067Z,1492145442.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:42.137Z,1492145442.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:42.513Z,1492145442.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:42.562Z,1492145442.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:42.879Z,1492145442.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:42.924Z,1492145442.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:43.280Z,1492145443.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:43.374Z,1492145443.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:43.669Z,1492145443.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:43.715Z,1492145443.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:44.068Z,1492145444.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:44.100Z,1492145444.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:44.473Z,1492145444.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:44.490Z,1492145444.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:44.865Z,1492145444.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:44.899Z,1492145444.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:45.266Z,1492145445.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:45.294Z,1492145445.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:45.667Z,1492145445.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:45.693Z,1492145445.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:46.069Z,1492145446.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:46.100Z,1492145446.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:46.483Z,1492145446.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:46.500Z,1492145446.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:46.865Z,1492145446.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:46.892Z,1492145446.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:47.266Z,1492145447.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:47.301Z,1492145447.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:47.674Z,1492145447.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:47.704Z,1492145447.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:48.065Z,1492145448.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:48.102Z,1492145448.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:48.489Z,1492145448.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:48.508Z,1492145448.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:48.895Z,1492145448.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:48.912Z,1492145448.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:49.278Z,1492145449.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:49.308Z,1492145449.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:49.665Z,1492145449.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:49.686Z,1492145449.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:50.081Z,1492145450.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:50.122Z,1492145450.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:50.472Z,1492145450.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:50.491Z,1492145450.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:50.886Z,1492145450.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:50.977Z,1492145450.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:51.275Z,1492145451.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:51.304Z,1492145451.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:51.665Z,1492145451.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:51.751Z,1492145451.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:52.067Z,1492145452.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:52.134Z,1492145452.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:52.487Z,1492145452.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:52.541Z,1492145452.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:52.895Z,1492145452.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:52.964Z,1492145452.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:53.266Z,1492145453.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:53.305Z,1492145453.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:53.669Z,1492145453.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:53.706Z,1492145453.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:54.085Z,1492145454.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:54.159Z,1492145454.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:54.471Z,1492145454.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:54.512Z,1492145454.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:54.761Z,1492145454.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:54.876Z,1492145454.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:54.895Z,1492145454.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:55.279Z,1492145455.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:55.295Z,1492145455.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:55.556Z,1492145455.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:55.682Z,1492145455.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:55.699Z,1492145455.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:56.066Z,1492145456.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:56.099Z,1492145456.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:56.478Z,1492145456.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:56.493Z,1492145456.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:56.878Z,1492145456.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:56.893Z,1492145456.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:57.274Z,1492145457.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:57.290Z,1492145457.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:57.689Z,1492145457.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:57.740Z,1492145457.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:58.072Z,1492145458.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:58.096Z,1492145458.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:58.470Z,1492145458.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:58.500Z,1492145458.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:58.865Z,1492145458.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:58.898Z,1492145458.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:59.266Z,1492145459.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:59.295Z,1492145459.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:50:59.673Z,1492145459.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:50:59.694Z,1492145459.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:00.074Z,1492145460.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:00.091Z,1492145460.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:00.488Z,1492145460.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:00.504Z,1492145460.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:00.865Z,1492145460.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:00.897Z,1492145460.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:01.265Z,1492145461.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:01.301Z,1492145461.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:01.665Z,1492145461.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:01.698Z,1492145461.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:02.069Z,1492145462.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:02.108Z,1492145462.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:02.469Z,1492145462.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:02.502Z,1492145462.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:02.873Z,1492145462.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:02.906Z,1492145462.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:03.269Z,1492145463.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:03.302Z,1492145463.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:03.665Z,1492145463.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:03.702Z,1492145463.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:04.077Z,1492145464.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:04.110Z,1492145464.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:04.469Z,1492145464.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:04.538Z,1492145464.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:04.866Z,1492145464.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:04.927Z,1492145464.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:05.263Z,1492145465.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:05.279Z,1492145465.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:05.695Z,1492145465.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:05.751Z,1492145465.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:06.071Z,1492145466.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:06.095Z,1492145466.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:06.470Z,1492145466.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:06.522Z,1492145466.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:06.872Z,1492145466.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:06.930Z,1492145466.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:07.270Z,1492145467.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:07.307Z,1492145467.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:07.670Z,1492145467.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:07.687Z,1492145467.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:08.085Z,1492145468.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:08.117Z,1492145468.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:08.477Z,1492145468.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:08.518Z,1492145468.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:08.873Z,1492145468.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:08.915Z,1492145468.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:09.274Z,1492145469.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:09.290Z,1492145469.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:09.674Z,1492145469.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:09.689Z,1492145469.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:10.082Z,1492145470.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:10.118Z,1492145470.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:10.467Z,1492145470.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:10.482Z,1492145470.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:10.869Z,1492145470.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:10.884Z,1492145470.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:11.262Z,1492145471.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:11.278Z,1492145471.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:11.677Z,1492145471.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:11.712Z,1492145471.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:12.077Z,1492145472.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:12.109Z,1492145472.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:12.470Z,1492145472.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:12.501Z,1492145472.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:12.867Z,1492145472.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:12.948Z,1492145472.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:13.266Z,1492145473.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:13.363Z,1492145473.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:13.665Z,1492145473.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:13.691Z,1492145473.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:14.076Z,1492145474.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:14.124Z,1492145474.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:14.486Z,1492145474.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:14.577Z,1492145474.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:14.893Z,1492145474.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:14.982Z,1492145474.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:15.295Z,1492145475.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:15.356Z,1492145475.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:15.680Z,1492145475.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:15.736Z,1492145475.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:16.067Z,1492145476.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:16.118Z,1492145476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:16.471Z,1492145476.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:16.504Z,1492145476.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:16.881Z,1492145476.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:16.899Z,1492145476.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:17.278Z,1492145477.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:17.293Z,1492145477.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:17.674Z,1492145477.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:17.738Z,1492145477.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:22.082Z,1492145482.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:22.123Z,1492145482.123 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:51:22.123Z,1492145482.123 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:51:22.123Z,1492145482.123 [BPC1](ERROR): Communications Fault
2017-04-14T04:51:22.132Z,1492145482.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:22.165Z,1492145482.165 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:51:22.244Z,1492145482.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:22.286Z,1492145482.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:22.608Z,1492145482.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:22.631Z,1492145482.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:23.019Z,1492145483.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:23.034Z,1492145483.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:23.090Z,1492145483.090 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:51:23.091Z,1492145483.091 [BPC1] No Fault, FailCount= 1
2017-04-14T04:51:23.403Z,1492145483.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:23.489Z,1492145483.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:23.827Z,1492145483.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:23.887Z,1492145483.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:24.213Z,1492145484.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:24.228Z,1492145484.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:24.625Z,1492145484.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:24.646Z,1492145484.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:25.024Z,1492145485.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:25.040Z,1492145485.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:25.440Z,1492145485.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:25.486Z,1492145485.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:25.831Z,1492145485.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:25.879Z,1492145485.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:26.203Z,1492145486.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:26.235Z,1492145486.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:26.611Z,1492145486.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:26.643Z,1492145486.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:27.031Z,1492145487.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:27.060Z,1492145487.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:27.502Z,1492145487.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:27.556Z,1492145487.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:27.803Z,1492145487.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:27.841Z,1492145487.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:28.209Z,1492145488.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:28.245Z,1492145488.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:28.623Z,1492145488.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:28.660Z,1492145488.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:29.023Z,1492145489.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:29.052Z,1492145489.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:29.532Z,1492145489.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:29.554Z,1492145489.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:29.821Z,1492145489.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:29.847Z,1492145489.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:30.232Z,1492145490.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:30.254Z,1492145490.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:30.632Z,1492145490.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:30.652Z,1492145490.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:31.036Z,1492145491.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:31.065Z,1492145491.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:31.464Z,1492145491.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:31.518Z,1492145491.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:31.811Z,1492145491.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:31.865Z,1492145491.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:32.206Z,1492145492.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:32.245Z,1492145492.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:32.613Z,1492145492.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:32.630Z,1492145492.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:33.019Z,1492145493.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:33.035Z,1492145493.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:33.473Z,1492145493.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:33.518Z,1492145493.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:33.812Z,1492145493.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:33.839Z,1492145493.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:34.203Z,1492145494.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:34.230Z,1492145494.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:34.605Z,1492145494.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:34.656Z,1492145494.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:35.012Z,1492145495.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:35.039Z,1492145495.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:35.411Z,1492145495.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:35.522Z,1492145495.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:35.847Z,1492145495.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:35.905Z,1492145495.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:36.211Z,1492145496.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:36.229Z,1492145496.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:36.612Z,1492145496.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:36.677Z,1492145496.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:37.012Z,1492145497.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:37.060Z,1492145497.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:37.420Z,1492145497.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:37.435Z,1492145497.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:37.812Z,1492145497.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:37.874Z,1492145497.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:38.204Z,1492145498.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:38.238Z,1492145498.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:38.604Z,1492145498.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:38.632Z,1492145498.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:39.003Z,1492145499.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:39.039Z,1492145499.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:39.409Z,1492145499.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:39.426Z,1492145499.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:39.815Z,1492145499.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:39.856Z,1492145499.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:40.212Z,1492145500.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:40.228Z,1492145500.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:40.612Z,1492145500.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:40.628Z,1492145500.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:41.012Z,1492145501.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:41.027Z,1492145501.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:41.444Z,1492145501.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:41.481Z,1492145501.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:41.803Z,1492145501.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:41.849Z,1492145501.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:42.220Z,1492145502.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:42.283Z,1492145502.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:42.636Z,1492145502.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:42.697Z,1492145502.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:43.002Z,1492145503.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:43.061Z,1492145503.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:43.503Z,1492145503.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:43.571Z,1492145503.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:43.844Z,1492145503.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:43.908Z,1492145503.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:44.210Z,1492145504.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:44.234Z,1492145504.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:44.613Z,1492145504.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:44.628Z,1492145504.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:45.001Z,1492145505.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:45.029Z,1492145505.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:45.450Z,1492145505.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:45.481Z,1492145505.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:45.801Z,1492145505.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:45.834Z,1492145505.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:46.202Z,1492145506.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:46.218Z,1492145506.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:46.601Z,1492145506.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:46.692Z,1492145506.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:47.010Z,1492145507.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:47.040Z,1492145507.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:47.482Z,1492145507.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:47.542Z,1492145507.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:47.813Z,1492145507.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:47.894Z,1492145507.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:48.217Z,1492145508.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:48.232Z,1492145508.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:48.601Z,1492145508.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:48.677Z,1492145508.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:49.001Z,1492145509.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:49.030Z,1492145509.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:49.468Z,1492145509.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:49.510Z,1492145509.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:49.809Z,1492145509.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:49.872Z,1492145509.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:50.209Z,1492145510.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:50.224Z,1492145510.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:50.614Z,1492145510.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:50.629Z,1492145510.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:51.006Z,1492145511.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:51.040Z,1492145511.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:51.403Z,1492145511.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:51.450Z,1492145511.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:51.821Z,1492145511.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:51.859Z,1492145511.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:52.208Z,1492145512.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:52.223Z,1492145512.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:52.608Z,1492145512.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:52.656Z,1492145512.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:53.011Z,1492145513.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:53.067Z,1492145513.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:53.410Z,1492145513.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:53.457Z,1492145513.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:53.816Z,1492145513.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:53.833Z,1492145513.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:54.218Z,1492145514.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:54.241Z,1492145514.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:54.613Z,1492145514.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:54.646Z,1492145514.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:55.005Z,1492145515.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:55.031Z,1492145515.030 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:55.031Z,1492145515.031 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:51:55.031Z,1492145515.031 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:51:55.037Z,1492145515.037 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:55.037Z,1492145515.037 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:51:55.038Z,1492145515.037 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:51:55.092Z,1492145515.092 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:51:55.093Z,1492145515.093 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:51:55.439Z,1492145515.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:55.507Z,1492145515.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:51:55.507Z,1492145515.507 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:51:55.508Z,1492145515.508 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:51:55.508Z,1492145515.508 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:51:55.806Z,1492145515.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:55.845Z,1492145515.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:51:55.845Z,1492145515.845 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:51:55.846Z,1492145515.846 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:51:55.861Z,1492145515.861 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:51:55.862Z,1492145515.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:51:55.862Z,1492145515.862 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:51:56.208Z,1492145516.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:56.246Z,1492145516.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:56.611Z,1492145516.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:56.627Z,1492145516.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:57.012Z,1492145517.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:57.032Z,1492145517.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:57.449Z,1492145517.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:57.491Z,1492145517.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:57.805Z,1492145517.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:57.859Z,1492145517.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:58.203Z,1492145518.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:58.261Z,1492145518.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:58.607Z,1492145518.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:58.682Z,1492145518.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:59.033Z,1492145519.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:59.082Z,1492145519.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:59.428Z,1492145519.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:59.461Z,1492145519.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:51:59.817Z,1492145519.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:51:59.858Z,1492145519.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:00.208Z,1492145520.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:00.270Z,1492145520.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:00.613Z,1492145520.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:00.635Z,1492145520.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:01.012Z,1492145521.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:01.083Z,1492145521.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:01.421Z,1492145521.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:01.468Z,1492145521.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:01.817Z,1492145521.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:01.844Z,1492145521.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:02.223Z,1492145522.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:02.266Z,1492145522.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:02.601Z,1492145522.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:02.663Z,1492145522.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:03.001Z,1492145523.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:03.065Z,1492145523.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:03.474Z,1492145523.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:03.533Z,1492145523.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:03.835Z,1492145523.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:03.853Z,1492145523.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:04.207Z,1492145524.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:04.249Z,1492145524.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:04.612Z,1492145524.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:04.655Z,1492145524.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:05.010Z,1492145525.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:05.042Z,1492145525.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:05.401Z,1492145525.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:05.441Z,1492145525.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:05.858Z,1492145525.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:05.910Z,1492145525.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:06.209Z,1492145526.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:06.260Z,1492145526.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:06.625Z,1492145526.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:06.633Z,1492145526.633 [PNI_TCM](ERROR): CRC does not match. Expected:0x25339 got:0x9262
2017-04-14T04:52:06.680Z,1492145526.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:07.007Z,1492145527.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:07.047Z,1492145527.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:07.397Z,1492145527.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:07.446Z,1492145527.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:07.847Z,1492145527.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:07.868Z,1492145527.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:08.214Z,1492145528.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:08.256Z,1492145528.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:08.605Z,1492145528.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:08.644Z,1492145528.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:09.007Z,1492145529.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:09.052Z,1492145529.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:09.412Z,1492145529.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:09.465Z,1492145529.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:09.818Z,1492145529.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:09.834Z,1492145529.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:10.213Z,1492145530.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:10.233Z,1492145530.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:10.613Z,1492145530.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:10.657Z,1492145530.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:11.011Z,1492145531.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:11.038Z,1492145531.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:11.427Z,1492145531.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:11.473Z,1492145531.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:11.815Z,1492145531.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:11.839Z,1492145531.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:12.201Z,1492145532.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:12.246Z,1492145532.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:12.625Z,1492145532.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:12.642Z,1492145532.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:13.028Z,1492145533.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:13.074Z,1492145533.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:13.416Z,1492145533.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:13.454Z,1492145533.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:13.840Z,1492145533.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:13.925Z,1492145533.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:14.206Z,1492145534.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:14.285Z,1492145534.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:14.613Z,1492145534.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:14.628Z,1492145534.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:15.017Z,1492145535.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:15.067Z,1492145535.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:15.120Z,1492145535.120 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T04:52:15.411Z,1492145535.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:15.452Z,1492145535.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:15.816Z,1492145535.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:15.878Z,1492145535.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.425700 seconds old.
2017-04-14T04:52:15.879Z,1492145535.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:15.880Z,1492145535.880 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.426300 seconds old.
2017-04-14T04:52:15.882Z,1492145535.882 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.426700 seconds old.
2017-04-14T04:52:15.885Z,1492145535.885 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.427500 seconds old.
2017-04-14T04:52:15.886Z,1492145535.886 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.428000 seconds old.
2017-04-14T04:52:16.207Z,1492145536.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:16.222Z,1492145536.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.770200 seconds old.
2017-04-14T04:52:16.223Z,1492145536.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:16.224Z,1492145536.224 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.770800 seconds old.
2017-04-14T04:52:16.227Z,1492145536.227 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 0.771200 seconds old.
2017-04-14T04:52:16.229Z,1492145536.229 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.772000 seconds old.
2017-04-14T04:52:16.230Z,1492145536.230 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 0.772400 seconds old.
2017-04-14T04:52:16.628Z,1492145536.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:16.688Z,1492145536.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.236400 seconds old.
2017-04-14T04:52:16.689Z,1492145536.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:16.690Z,1492145536.690 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.237000 seconds old.
2017-04-14T04:52:16.693Z,1492145536.693 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.237400 seconds old.
2017-04-14T04:52:16.695Z,1492145536.695 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.238100 seconds old.
2017-04-14T04:52:16.697Z,1492145536.697 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.238500 seconds old.
2017-04-14T04:52:17.010Z,1492145537.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:17.031Z,1492145537.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.579500 seconds old.
2017-04-14T04:52:17.032Z,1492145537.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:17.033Z,1492145537.033 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.579900 seconds old.
2017-04-14T04:52:17.036Z,1492145537.036 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 1.580300 seconds old.
2017-04-14T04:52:17.038Z,1492145537.038 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.580700 seconds old.
2017-04-14T04:52:17.039Z,1492145537.039 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 1.581200 seconds old.
2017-04-14T04:52:17.465Z,1492145537.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:17.537Z,1492145537.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.085500 seconds old.
2017-04-14T04:52:17.538Z,1492145537.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:17.544Z,1492145537.544 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.090100 seconds old.
2017-04-14T04:52:17.546Z,1492145537.546 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.090500 seconds old.
2017-04-14T04:52:17.553Z,1492145537.553 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.096000 seconds old.
2017-04-14T04:52:17.555Z,1492145537.555 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.096500 seconds old.
2017-04-14T04:52:17.844Z,1492145537.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:17.873Z,1492145537.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.420800 seconds old.
2017-04-14T04:52:17.874Z,1492145537.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:17.875Z,1492145537.875 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.421200 seconds old.
2017-04-14T04:52:17.890Z,1492145537.890 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 2.434100 seconds old.
2017-04-14T04:52:17.896Z,1492145537.897 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.439200 seconds old.
2017-04-14T04:52:17.898Z,1492145537.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 2.439600 seconds old.
2017-04-14T04:52:22.593Z,1492145542.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:22.610Z,1492145542.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.158600 seconds old.
2017-04-14T04:52:22.612Z,1492145542.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:22.612Z,1492145542.612 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.159000 seconds old.
2017-04-14T04:52:22.635Z,1492145542.635 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.159600 seconds old.
2017-04-14T04:52:22.638Z,1492145542.638 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.180400 seconds old.
2017-04-14T04:52:22.639Z,1492145542.639 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.180900 seconds old.
2017-04-14T04:52:22.730Z,1492145542.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:22.761Z,1492145542.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.308900 seconds old.
2017-04-14T04:52:22.762Z,1492145542.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:22.763Z,1492145542.763 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.309200 seconds old.
2017-04-14T04:52:22.765Z,1492145542.765 [DeadReckonWithRespectToWater](DEBUG): Most recent orientation data is 7.309700 seconds old.
2017-04-14T04:52:22.768Z,1492145542.768 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.310300 seconds old.
2017-04-14T04:52:22.769Z,1492145542.769 [DeadReckonUsingDVLWaterTrack](DEBUG): Most recent orientation data is 7.310800 seconds old.
2017-04-14T04:52:23.117Z,1492145543.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:23.144Z,1492145543.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:23.517Z,1492145543.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:23.546Z,1492145543.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:23.913Z,1492145543.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:23.950Z,1492145543.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:24.315Z,1492145544.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:24.350Z,1492145544.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:24.746Z,1492145544.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:24.762Z,1492145544.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:25.123Z,1492145545.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:25.139Z,1492145545.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:25.522Z,1492145545.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:25.538Z,1492145545.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:25.929Z,1492145545.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:25.950Z,1492145545.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:26.320Z,1492145546.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:26.344Z,1492145546.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:26.728Z,1492145546.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:26.748Z,1492145546.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:27.125Z,1492145547.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:27.166Z,1492145547.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:27.513Z,1492145547.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:27.558Z,1492145547.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:27.922Z,1492145547.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:27.975Z,1492145547.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:28.313Z,1492145548.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:28.372Z,1492145548.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:28.715Z,1492145548.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:28.730Z,1492145548.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:29.118Z,1492145549.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:29.159Z,1492145549.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:29.523Z,1492145549.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:29.583Z,1492145549.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:29.939Z,1492145549.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:29.973Z,1492145549.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:30.333Z,1492145550.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:30.437Z,1492145550.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:30.723Z,1492145550.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:30.742Z,1492145550.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:31.122Z,1492145551.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:31.179Z,1492145551.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:31.515Z,1492145551.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:31.579Z,1492145551.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:31.914Z,1492145551.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:31.966Z,1492145551.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:32.321Z,1492145552.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:32.337Z,1492145552.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:32.721Z,1492145552.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:32.737Z,1492145552.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:33.126Z,1492145553.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:33.142Z,1492145553.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:33.510Z,1492145553.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:33.543Z,1492145553.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:33.941Z,1492145553.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:33.985Z,1492145553.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:34.317Z,1492145554.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:34.343Z,1492145554.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:34.717Z,1492145554.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:34.744Z,1492145554.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:35.113Z,1492145555.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:35.149Z,1492145555.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:35.517Z,1492145555.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:35.544Z,1492145555.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:35.929Z,1492145555.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:35.972Z,1492145555.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:36.321Z,1492145556.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:36.365Z,1492145556.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:36.723Z,1492145556.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:36.765Z,1492145556.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:37.130Z,1492145557.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:37.146Z,1492145557.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:37.521Z,1492145557.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:37.537Z,1492145557.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:37.976Z,1492145557.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:38.047Z,1492145558.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:38.321Z,1492145558.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:38.354Z,1492145558.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:38.724Z,1492145558.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:38.781Z,1492145558.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:39.128Z,1492145559.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:39.152Z,1492145559.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:39.517Z,1492145559.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:39.544Z,1492145559.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:39.921Z,1492145559.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:39.954Z,1492145559.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:40.317Z,1492145560.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:40.401Z,1492145560.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:40.717Z,1492145560.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:40.755Z,1492145560.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:41.123Z,1492145561.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:41.174Z,1492145561.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:41.522Z,1492145561.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:41.538Z,1492145561.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:41.931Z,1492145561.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:41.982Z,1492145561.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:42.321Z,1492145562.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:42.371Z,1492145562.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:42.726Z,1492145562.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:42.742Z,1492145562.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:43.123Z,1492145563.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:43.139Z,1492145563.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:43.522Z,1492145563.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:43.542Z,1492145563.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:43.927Z,1492145563.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:43.943Z,1492145563.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:44.322Z,1492145564.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:44.338Z,1492145564.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:44.722Z,1492145564.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:44.738Z,1492145564.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:45.131Z,1492145565.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:45.147Z,1492145565.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:45.513Z,1492145565.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:45.541Z,1492145565.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:45.925Z,1492145565.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:45.955Z,1492145565.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:45.969Z,1492145565.969 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:45.969Z,1492145565.969 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T04:52:45.970Z,1492145565.970 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:52:45.995Z,1492145565.995 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:52:46.313Z,1492145566.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:46.355Z,1492145566.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:46.409Z,1492145566.409 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:52:46.409Z,1492145566.409 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T04:52:46.714Z,1492145566.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:46.730Z,1492145566.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:46.753Z,1492145566.753 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:52:46.753Z,1492145566.753 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:52:46.754Z,1492145566.754 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:52:47.119Z,1492145567.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:47.139Z,1492145567.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:47.521Z,1492145567.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:47.561Z,1492145567.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:47.929Z,1492145567.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:47.973Z,1492145567.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:48.319Z,1492145568.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:48.347Z,1492145568.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:48.730Z,1492145568.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:48.757Z,1492145568.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:49.126Z,1492145569.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:49.151Z,1492145569.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:49.519Z,1492145569.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:49.561Z,1492145569.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:49.938Z,1492145569.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:49.988Z,1492145569.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:50.313Z,1492145570.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:50.340Z,1492145570.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:50.727Z,1492145570.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:50.752Z,1492145570.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:51.130Z,1492145571.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:51.154Z,1492145571.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:51.513Z,1492145571.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:51.540Z,1492145571.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:51.932Z,1492145571.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:51.947Z,1492145571.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:52.314Z,1492145572.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:52.341Z,1492145572.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:52.713Z,1492145572.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:52.807Z,1492145572.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:53.116Z,1492145573.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:53.154Z,1492145573.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:53.526Z,1492145573.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:53.553Z,1492145573.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:53.915Z,1492145573.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:53.970Z,1492145573.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:54.317Z,1492145574.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:54.350Z,1492145574.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:54.717Z,1492145574.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:54.763Z,1492145574.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:55.113Z,1492145575.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:55.166Z,1492145575.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:55.514Z,1492145575.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:55.555Z,1492145575.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:55.920Z,1492145575.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:55.952Z,1492145575.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:56.322Z,1492145576.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:56.338Z,1492145576.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:56.716Z,1492145576.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:56.745Z,1492145576.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:57.121Z,1492145577.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:57.142Z,1492145577.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:57.521Z,1492145577.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:57.537Z,1492145577.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:57.922Z,1492145577.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:57.942Z,1492145577.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:58.325Z,1492145578.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:58.346Z,1492145578.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:58.734Z,1492145578.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:58.786Z,1492145578.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:59.206Z,1492145579.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:59.364Z,1492145579.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:52:59.623Z,1492145579.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:52:59.709Z,1492145579.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:00.006Z,1492145580.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:00.054Z,1492145580.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:00.402Z,1492145580.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:00.476Z,1492145580.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:00.812Z,1492145580.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:00.842Z,1492145580.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:01.183Z,1492145581.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:01.219Z,1492145581.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:01.688Z,1492145581.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:01.802Z,1492145581.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:01.992Z,1492145581.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:02.036Z,1492145582.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:02.432Z,1492145582.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:02.497Z,1492145582.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:02.836Z,1492145582.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:02.910Z,1492145582.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:03.203Z,1492145583.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:03.288Z,1492145583.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:03.621Z,1492145583.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:03.711Z,1492145583.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:03.992Z,1492145583.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:04.026Z,1492145584.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:04.383Z,1492145584.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:04.436Z,1492145584.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:04.780Z,1492145584.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:04.817Z,1492145584.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:05.218Z,1492145585.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:05.318Z,1492145585.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:05.588Z,1492145585.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:05.641Z,1492145585.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:05.990Z,1492145585.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:06.085Z,1492145586.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:06.381Z,1492145586.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:06.416Z,1492145586.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:06.799Z,1492145586.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:06.839Z,1492145586.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:07.191Z,1492145587.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:07.282Z,1492145587.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:07.583Z,1492145587.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:07.622Z,1492145587.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:07.978Z,1492145587.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:08.026Z,1492145588.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:08.401Z,1492145588.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:08.454Z,1492145588.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:08.781Z,1492145588.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:08.860Z,1492145588.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:09.185Z,1492145589.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:09.212Z,1492145589.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:09.607Z,1492145589.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:09.623Z,1492145589.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:09.988Z,1492145589.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:10.019Z,1492145590.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:10.389Z,1492145590.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:10.405Z,1492145590.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:10.788Z,1492145590.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:10.805Z,1492145590.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:11.189Z,1492145591.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:11.204Z,1492145591.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:11.636Z,1492145591.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:11.679Z,1492145591.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:11.986Z,1492145591.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:12.047Z,1492145592.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:12.414Z,1492145592.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:12.483Z,1492145592.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:12.785Z,1492145592.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:12.801Z,1492145592.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:13.191Z,1492145593.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:13.255Z,1492145593.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:13.652Z,1492145593.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:13.688Z,1492145593.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:13.988Z,1492145593.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:14.004Z,1492145594.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:14.389Z,1492145594.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:14.430Z,1492145594.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:14.828Z,1492145594.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:14.880Z,1492145594.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:15.230Z,1492145595.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:15.275Z,1492145595.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:15.748Z,1492145595.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:15.834Z,1492145595.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:16.066Z,1492145596.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:16.147Z,1492145596.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:16.420Z,1492145596.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:16.485Z,1492145596.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:16.822Z,1492145596.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:16.887Z,1492145596.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:17.220Z,1492145597.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:17.283Z,1492145597.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:17.681Z,1492145597.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:17.773Z,1492145597.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:18.058Z,1492145598.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:18.203Z,1492145598.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:24.142Z,1492145604.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:24.179Z,1492145604.179 [BPC1](ERROR): Failed to receive battery data
2017-04-14T04:53:24.179Z,1492145604.179 [BPC1] Communications Fault, FailCount= 1
2017-04-14T04:53:24.179Z,1492145604.180 [BPC1](ERROR): Communications Fault
2017-04-14T04:53:24.194Z,1492145604.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:24.254Z,1492145604.254 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T04:53:24.308Z,1492145604.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:24.343Z,1492145604.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:24.697Z,1492145604.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:24.744Z,1492145604.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:25.105Z,1492145605.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:25.138Z,1492145605.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:25.206Z,1492145605.206 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T04:53:25.206Z,1492145605.207 [BPC1] No Fault, FailCount= 1
2017-04-14T04:53:25.494Z,1492145605.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:25.590Z,1492145605.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:25.898Z,1492145605.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:25.948Z,1492145605.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:26.294Z,1492145606.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:26.338Z,1492145606.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:26.702Z,1492145606.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:26.737Z,1492145606.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:27.103Z,1492145607.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:27.139Z,1492145607.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:27.508Z,1492145607.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:27.536Z,1492145607.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:27.914Z,1492145607.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:27.950Z,1492145607.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:28.298Z,1492145608.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:28.315Z,1492145608.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:28.705Z,1492145608.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:28.721Z,1492145608.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:29.102Z,1492145609.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:29.118Z,1492145609.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:29.510Z,1492145609.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:29.658Z,1492145609.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:29.930Z,1492145609.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:30.009Z,1492145610.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:30.375Z,1492145610.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:30.444Z,1492145610.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:30.707Z,1492145610.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:30.732Z,1492145610.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:31.100Z,1492145611.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:31.132Z,1492145611.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:31.512Z,1492145611.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:31.628Z,1492145611.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:31.897Z,1492145611.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:31.924Z,1492145611.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:32.303Z,1492145612.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:32.348Z,1492145612.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:32.720Z,1492145612.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:32.779Z,1492145612.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:33.158Z,1492145613.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:33.275Z,1492145613.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:33.508Z,1492145613.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:33.537Z,1492145613.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:33.909Z,1492145613.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:33.937Z,1492145613.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:34.301Z,1492145614.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:34.340Z,1492145614.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:34.697Z,1492145614.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:34.743Z,1492145614.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:35.111Z,1492145615.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:35.143Z,1492145615.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:35.504Z,1492145615.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:35.560Z,1492145615.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:35.922Z,1492145615.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:35.968Z,1492145615.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:36.318Z,1492145616.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:36.364Z,1492145616.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:36.704Z,1492145616.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:36.778Z,1492145616.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:37.093Z,1492145617.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:37.130Z,1492145617.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:37.498Z,1492145617.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:37.553Z,1492145617.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:37.911Z,1492145617.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:37.937Z,1492145617.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:38.314Z,1492145618.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:38.380Z,1492145618.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:38.701Z,1492145618.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:38.754Z,1492145618.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:39.094Z,1492145619.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:39.112Z,1492145619.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:39.493Z,1492145619.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:39.530Z,1492145619.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:39.905Z,1492145619.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:39.933Z,1492145619.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:40.295Z,1492145620.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:40.334Z,1492145620.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:40.693Z,1492145620.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:40.722Z,1492145620.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:41.094Z,1492145621.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:41.136Z,1492145621.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:41.493Z,1492145621.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:41.536Z,1492145621.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:41.905Z,1492145621.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:41.941Z,1492145621.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:42.301Z,1492145622.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:42.344Z,1492145622.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:42.706Z,1492145622.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:42.740Z,1492145622.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:43.105Z,1492145623.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:43.137Z,1492145623.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:43.548Z,1492145623.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:43.614Z,1492145623.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:43.909Z,1492145623.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:43.925Z,1492145623.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:44.305Z,1492145624.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:44.377Z,1492145624.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:44.703Z,1492145624.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:44.719Z,1492145624.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:45.096Z,1492145625.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:45.128Z,1492145625.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:45.527Z,1492145625.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:45.593Z,1492145625.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:45.901Z,1492145625.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:45.940Z,1492145625.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:46.293Z,1492145626.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:46.342Z,1492145626.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:46.697Z,1492145626.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:46.734Z,1492145626.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:47.105Z,1492145627.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:47.140Z,1492145627.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:47.502Z,1492145627.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:47.517Z,1492145627.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:47.901Z,1492145627.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:47.917Z,1492145627.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:48.314Z,1492145628.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:48.333Z,1492145628.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:48.709Z,1492145628.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:48.730Z,1492145628.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:49.100Z,1492145629.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:49.225Z,1492145629.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:49.493Z,1492145629.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:49.534Z,1492145629.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:49.907Z,1492145629.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:49.939Z,1492145629.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:50.307Z,1492145630.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:50.345Z,1492145630.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:50.710Z,1492145630.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:50.755Z,1492145630.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:51.099Z,1492145631.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:51.114Z,1492145631.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:51.493Z,1492145631.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:51.562Z,1492145631.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:51.897Z,1492145631.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:51.924Z,1492145631.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:52.293Z,1492145632.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:52.343Z,1492145632.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:52.695Z,1492145632.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:52.734Z,1492145632.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:53.097Z,1492145633.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:53.125Z,1492145633.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:53.504Z,1492145633.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:53.555Z,1492145633.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:53.904Z,1492145633.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:53.944Z,1492145633.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:54.350Z,1492145634.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:54.394Z,1492145634.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:54.713Z,1492145634.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:54.762Z,1492145634.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:55.101Z,1492145635.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:55.117Z,1492145635.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:55.510Z,1492145635.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:55.530Z,1492145635.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:55.901Z,1492145635.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:55.976Z,1492145635.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:56.308Z,1492145636.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:56.341Z,1492145636.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:56.702Z,1492145636.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:56.738Z,1492145636.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:57.095Z,1492145637.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:57.136Z,1492145637.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:57.545Z,1492145637.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:57.582Z,1492145637.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:57.898Z,1492145637.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:57.918Z,1492145637.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:58.301Z,1492145638.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:58.316Z,1492145638.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:58.700Z,1492145638.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:58.722Z,1492145638.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:59.094Z,1492145639.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:59.133Z,1492145639.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:59.557Z,1492145639.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:59.600Z,1492145639.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:53:59.905Z,1492145639.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:53:59.921Z,1492145639.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:00.302Z,1492145640.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:00.318Z,1492145640.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:00.702Z,1492145640.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:00.722Z,1492145640.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:01.108Z,1492145641.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:01.124Z,1492145641.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:01.493Z,1492145641.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:01.531Z,1492145641.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:01.897Z,1492145641.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:01.934Z,1492145641.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:02.297Z,1492145642.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:02.332Z,1492145642.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:02.694Z,1492145642.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:02.770Z,1492145642.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:03.098Z,1492145643.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:03.152Z,1492145643.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:03.530Z,1492145643.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:03.564Z,1492145643.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:03.902Z,1492145643.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:03.921Z,1492145643.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:04.305Z,1492145644.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:04.359Z,1492145644.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:04.691Z,1492145644.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:04.744Z,1492145644.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:05.094Z,1492145645.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:05.204Z,1492145645.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:05.501Z,1492145645.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:05.532Z,1492145645.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:05.898Z,1492145645.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:05.953Z,1492145645.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:06.301Z,1492145646.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:06.352Z,1492145646.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:06.697Z,1492145646.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:06.714Z,1492145646.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:07.097Z,1492145647.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:07.196Z,1492145647.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:07.496Z,1492145647.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:07.525Z,1492145647.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:07.906Z,1492145647.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:07.922Z,1492145647.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:08.305Z,1492145648.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:08.322Z,1492145648.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:08.703Z,1492145648.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:08.724Z,1492145648.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:09.100Z,1492145649.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:09.122Z,1492145649.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:09.493Z,1492145649.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:09.526Z,1492145649.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:09.899Z,1492145649.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:09.930Z,1492145649.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:10.293Z,1492145650.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:10.345Z,1492145650.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:10.693Z,1492145650.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:10.729Z,1492145650.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:11.097Z,1492145651.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:11.130Z,1492145651.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:11.548Z,1492145651.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:11.586Z,1492145651.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:11.893Z,1492145651.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:11.934Z,1492145651.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:12.298Z,1492145652.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:12.313Z,1492145652.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:12.698Z,1492145652.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:12.714Z,1492145652.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:13.105Z,1492145653.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:13.121Z,1492145653.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:13.545Z,1492145653.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:13.566Z,1492145653.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:13.905Z,1492145653.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:13.922Z,1492145653.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:14.305Z,1492145654.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:14.321Z,1492145654.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:14.700Z,1492145654.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:14.721Z,1492145654.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:15.101Z,1492145655.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:15.207Z,1492145655.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:15.493Z,1492145655.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:15.532Z,1492145655.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:15.893Z,1492145655.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:15.946Z,1492145655.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:16.298Z,1492145656.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:16.328Z,1492145656.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:16.702Z,1492145656.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:16.718Z,1492145656.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:17.184Z,1492145657.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:17.230Z,1492145657.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:17.495Z,1492145657.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:17.535Z,1492145657.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:17.553Z,1492145657.553 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T04:54:17.553Z,1492145657.553 [Default:CheckIn:C.Wait] Stopped
2017-04-14T04:54:17.553Z,1492145657.553 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T04:54:17.553Z,1492145657.553 [Default:CheckIn:D] Running Loop=1
2017-04-14T04:54:17.893Z,1492145657.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:17.909Z,1492145657.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:17.935Z,1492145657.935 [Default:CheckIn:D] Stopped
2017-04-14T04:54:17.935Z,1492145657.935 [Default:CheckIn:E] Running Loop=1
2017-04-14T04:54:18.295Z,1492145658.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:18.382Z,1492145658.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:18.403Z,1492145658.402 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 88.210262 min 
2017-04-14T04:54:18.403Z,1492145658.403 [Default:CheckIn:E] Stopped
2017-04-14T04:54:18.403Z,1492145658.403 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T04:54:18.403Z,1492145658.403 [Default:CheckIn] Stopped
2017-04-14T04:54:18.403Z,1492145658.403 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T04:54:18.403Z,1492145658.403 [Default:CheckIn](INFO): Running loop #14
2017-04-14T04:54:18.403Z,1492145658.404 [Default:CheckIn] Running Loop=14
2017-04-14T04:54:18.404Z,1492145658.404 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T04:54:18.404Z,1492145658.404 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T04:54:22.042Z,1492145662.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:22.058Z,1492145662.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:22.145Z,1492145662.145 [NAL9602](INFO): Powering up
2017-04-14T04:54:22.162Z,1492145662.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:22.206Z,1492145662.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:22.521Z,1492145662.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:22.574Z,1492145662.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:22.918Z,1492145662.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:22.955Z,1492145662.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:23.309Z,1492145663.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:23.374Z,1492145663.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:23.710Z,1492145663.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:23.765Z,1492145663.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:24.113Z,1492145664.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:24.130Z,1492145664.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:24.513Z,1492145664.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:24.530Z,1492145664.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:24.916Z,1492145664.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:24.932Z,1492145664.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:25.317Z,1492145665.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:25.333Z,1492145665.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:25.723Z,1492145665.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:25.738Z,1492145665.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:26.121Z,1492145666.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:26.137Z,1492145666.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:26.513Z,1492145666.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:26.538Z,1492145666.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:26.917Z,1492145666.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:26.933Z,1492145666.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:27.317Z,1492145667.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:27.334Z,1492145667.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:27.720Z,1492145667.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:27.740Z,1492145667.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:28.109Z,1492145668.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:28.136Z,1492145668.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:28.510Z,1492145668.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:28.557Z,1492145668.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:28.915Z,1492145668.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:28.978Z,1492145668.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:29.314Z,1492145669.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:29.358Z,1492145669.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:29.717Z,1492145669.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:29.738Z,1492145669.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:30.125Z,1492145670.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:30.140Z,1492145670.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:30.517Z,1492145670.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:30.533Z,1492145670.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:30.916Z,1492145670.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:30.944Z,1492145670.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:31.321Z,1492145671.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:31.342Z,1492145671.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:31.729Z,1492145671.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:31.745Z,1492145671.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:32.129Z,1492145672.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:32.150Z,1492145672.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:32.526Z,1492145672.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:32.542Z,1492145672.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:32.935Z,1492145672.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:32.951Z,1492145672.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:33.293Z,1492145673.293 [NAL9602](INFO): NAL9602 initialized
2017-04-14T04:54:33.312Z,1492145673.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:33.385Z,1492145673.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:33.715Z,1492145673.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:33.777Z,1492145673.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:34.145Z,1492145674.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:34.162Z,1492145674.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:34.554Z,1492145674.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:34.646Z,1492145674.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:34.936Z,1492145674.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:34.997Z,1492145674.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:35.380Z,1492145675.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:35.497Z,1492145675.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:35.786Z,1492145675.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:35.954Z,1492145675.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:36.141Z,1492145676.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:36.206Z,1492145676.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:36.512Z,1492145676.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:36.623Z,1492145676.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:36.930Z,1492145676.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:37.007Z,1492145677.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:37.360Z,1492145677.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:37.482Z,1492145677.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:37.750Z,1492145677.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:37.859Z,1492145677.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:38.152Z,1492145678.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:38.213Z,1492145678.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:38.532Z,1492145678.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:38.601Z,1492145678.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:38.911Z,1492145678.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:38.964Z,1492145678.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:39.334Z,1492145679.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:39.404Z,1492145679.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:39.710Z,1492145679.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:39.784Z,1492145679.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:40.111Z,1492145680.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:40.156Z,1492145680.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:40.512Z,1492145680.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:40.540Z,1492145680.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:40.928Z,1492145680.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:40.944Z,1492145680.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:41.318Z,1492145681.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:41.351Z,1492145681.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:41.709Z,1492145681.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:41.746Z,1492145681.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:42.109Z,1492145682.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:42.145Z,1492145682.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:42.534Z,1492145682.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:42.552Z,1492145682.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:42.934Z,1492145682.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:42.952Z,1492145682.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:43.310Z,1492145683.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:43.346Z,1492145683.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:43.729Z,1492145683.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:43.745Z,1492145683.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:44.128Z,1492145684.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:44.145Z,1492145684.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:44.513Z,1492145684.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:44.545Z,1492145684.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:44.919Z,1492145684.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:44.947Z,1492145684.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:45.333Z,1492145685.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:45.349Z,1492145685.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:45.717Z,1492145685.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:45.745Z,1492145685.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:46.114Z,1492145686.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:46.148Z,1492145686.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:46.510Z,1492145686.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:46.546Z,1492145686.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:46.918Z,1492145686.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:46.944Z,1492145686.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:47.314Z,1492145687.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:47.352Z,1492145687.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:47.718Z,1492145687.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:47.746Z,1492145687.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:48.109Z,1492145688.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:48.148Z,1492145688.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:48.509Z,1492145688.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:48.539Z,1492145688.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:48.917Z,1492145688.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:48.950Z,1492145688.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:49.313Z,1492145689.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:49.352Z,1492145689.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:49.713Z,1492145689.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:49.798Z,1492145689.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:50.117Z,1492145690.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:50.153Z,1492145690.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:50.513Z,1492145690.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:50.558Z,1492145690.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:50.916Z,1492145690.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:50.945Z,1492145690.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:51.319Z,1492145691.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:51.366Z,1492145691.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:51.717Z,1492145691.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:51.770Z,1492145691.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:52.116Z,1492145692.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:52.132Z,1492145692.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:52.519Z,1492145692.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:52.542Z,1492145692.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:52.921Z,1492145692.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:52.937Z,1492145692.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:53.327Z,1492145693.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:53.343Z,1492145693.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:53.709Z,1492145693.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:53.742Z,1492145693.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:54.113Z,1492145694.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:54.139Z,1492145694.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:54.513Z,1492145694.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:54.542Z,1492145694.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:54.917Z,1492145694.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:54.944Z,1492145694.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:55.330Z,1492145695.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:55.350Z,1492145695.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:55.716Z,1492145695.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:55.738Z,1492145695.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:56.122Z,1492145696.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:56.138Z,1492145696.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:56.138Z,1492145696.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T04:54:56.138Z,1492145696.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:54:56.145Z,1492145696.145 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:56.145Z,1492145696.145 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T04:54:56.145Z,1492145696.145 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:54:56.176Z,1492145696.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:54:56.176Z,1492145696.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:54:56.521Z,1492145696.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:56.558Z,1492145696.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:54:56.558Z,1492145696.558 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T04:54:56.559Z,1492145696.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:54:56.559Z,1492145696.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T04:54:56.914Z,1492145696.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:56.942Z,1492145696.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:54:56.943Z,1492145696.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:54:56.943Z,1492145696.943 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:54:56.948Z,1492145696.948 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:54:56.948Z,1492145696.948 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:54:56.949Z,1492145696.949 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:54:57.314Z,1492145697.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:57.341Z,1492145697.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:57.731Z,1492145697.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:57.747Z,1492145697.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:58.110Z,1492145698.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:58.146Z,1492145698.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:58.511Z,1492145698.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:58.540Z,1492145698.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:58.918Z,1492145698.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:58.945Z,1492145698.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:59.311Z,1492145699.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:59.354Z,1492145699.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:54:59.709Z,1492145699.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:54:59.731Z,1492145699.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:00.125Z,1492145700.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:00.162Z,1492145700.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:00.517Z,1492145700.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:00.534Z,1492145700.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:00.919Z,1492145700.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:00.935Z,1492145700.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:01.325Z,1492145701.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:01.346Z,1492145701.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:01.745Z,1492145701.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:01.776Z,1492145701.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:02.117Z,1492145702.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:02.133Z,1492145702.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:02.566Z,1492145702.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:02.594Z,1492145702.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:02.923Z,1492145702.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:02.946Z,1492145702.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:03.319Z,1492145703.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:03.352Z,1492145703.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:03.711Z,1492145703.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:03.810Z,1492145703.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:04.111Z,1492145704.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:04.163Z,1492145704.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:04.509Z,1492145704.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:04.570Z,1492145704.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:04.938Z,1492145704.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:04.959Z,1492145704.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:05.320Z,1492145705.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:05.370Z,1492145705.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:05.721Z,1492145705.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:05.770Z,1492145705.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:06.103Z,1492145706.103 [NAL9602](INFO): SBD MO Status=2, MOMSN=2107, MT Status=2, MTMSN=0
2017-04-14T04:55:06.103Z,1492145706.103 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T04:55:06.120Z,1492145706.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:06.153Z,1492145706.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:06.530Z,1492145706.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:06.570Z,1492145706.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:06.915Z,1492145706.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:06.968Z,1492145706.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:07.317Z,1492145707.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:07.338Z,1492145707.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:07.720Z,1492145707.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:07.740Z,1492145707.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:08.117Z,1492145708.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:08.133Z,1492145708.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:08.518Z,1492145708.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:08.534Z,1492145708.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:08.918Z,1492145708.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:08.934Z,1492145708.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:09.312Z,1492145709.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:09.336Z,1492145709.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:09.709Z,1492145709.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:09.742Z,1492145709.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:10.109Z,1492145710.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:10.137Z,1492145710.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:10.531Z,1492145710.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:10.562Z,1492145710.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:10.913Z,1492145710.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:10.939Z,1492145710.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:11.309Z,1492145711.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:11.341Z,1492145711.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:11.709Z,1492145711.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:11.746Z,1492145711.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:12.135Z,1492145712.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:12.152Z,1492145712.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:12.524Z,1492145712.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:12.558Z,1492145712.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:12.921Z,1492145712.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:12.998Z,1492145712.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:13.311Z,1492145713.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:13.363Z,1492145713.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:13.719Z,1492145713.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:13.764Z,1492145713.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:14.116Z,1492145714.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:14.138Z,1492145714.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:14.539Z,1492145714.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:14.590Z,1492145714.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:14.924Z,1492145714.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:14.969Z,1492145714.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:15.359Z,1492145715.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:15.413Z,1492145715.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:15.719Z,1492145715.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:15.767Z,1492145715.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:16.128Z,1492145716.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:16.148Z,1492145716.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:16.511Z,1492145716.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:16.538Z,1492145716.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:16.930Z,1492145716.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:16.951Z,1492145716.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:17.311Z,1492145717.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:17.371Z,1492145717.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:17.755Z,1492145717.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:17.788Z,1492145717.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:18.115Z,1492145718.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:18.222Z,1492145718.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:18.526Z,1492145718.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:18.580Z,1492145718.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:23.541Z,1492145723.541 [NAL9602](INFO): SBD MO Status=2, MOMSN=2107, MT Status=2, MTMSN=0
2017-04-14T04:55:23.541Z,1492145723.541 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T04:55:23.581Z,1492145723.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:23.647Z,1492145723.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:23.844Z,1492145723.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:23.891Z,1492145723.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:24.280Z,1492145724.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:24.381Z,1492145724.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:24.659Z,1492145724.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:24.726Z,1492145724.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:25.072Z,1492145725.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:25.148Z,1492145725.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:25.416Z,1492145725.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:25.440Z,1492145725.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:25.874Z,1492145725.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:25.902Z,1492145725.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:26.202Z,1492145726.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:26.246Z,1492145726.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:26.613Z,1492145726.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:26.642Z,1492145726.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:27.084Z,1492145727.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:27.153Z,1492145727.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:27.405Z,1492145727.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:27.421Z,1492145727.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:27.813Z,1492145727.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:27.830Z,1492145727.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:28.207Z,1492145728.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:28.223Z,1492145728.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:28.623Z,1492145728.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:28.648Z,1492145728.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:29.068Z,1492145729.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:29.117Z,1492145729.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:29.412Z,1492145729.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:29.428Z,1492145729.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:29.812Z,1492145729.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:29.827Z,1492145729.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:30.226Z,1492145730.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:30.274Z,1492145730.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:30.612Z,1492145730.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:30.644Z,1492145730.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:31.073Z,1492145731.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:31.108Z,1492145731.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:31.405Z,1492145731.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:31.444Z,1492145731.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:31.820Z,1492145731.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:31.838Z,1492145731.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:32.207Z,1492145732.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:32.246Z,1492145732.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:32.612Z,1492145732.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:32.643Z,1492145732.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:33.005Z,1492145733.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:33.120Z,1492145733.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:33.412Z,1492145733.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:33.442Z,1492145733.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:33.817Z,1492145733.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:33.833Z,1492145733.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:34.204Z,1492145734.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:34.245Z,1492145734.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:34.603Z,1492145734.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:34.651Z,1492145734.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:35.007Z,1492145735.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:35.050Z,1492145735.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:35.469Z,1492145735.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:35.501Z,1492145735.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:35.809Z,1492145735.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:35.838Z,1492145735.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:36.205Z,1492145736.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:36.247Z,1492145736.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:36.603Z,1492145736.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:36.670Z,1492145736.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:37.000Z,1492145737.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:37.049Z,1492145737.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:37.438Z,1492145737.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:37.471Z,1492145737.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:37.810Z,1492145737.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:37.862Z,1492145737.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:38.221Z,1492145738.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:38.246Z,1492145738.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:38.616Z,1492145738.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:38.670Z,1492145738.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:39.057Z,1492145739.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:39.102Z,1492145739.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:39.401Z,1492145739.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:39.417Z,1492145739.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:39.814Z,1492145739.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:39.849Z,1492145739.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:40.218Z,1492145740.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:40.248Z,1492145740.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:40.614Z,1492145740.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:40.646Z,1492145740.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:41.079Z,1492145741.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:41.121Z,1492145741.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:41.405Z,1492145741.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:41.450Z,1492145741.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:41.801Z,1492145741.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:41.839Z,1492145741.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:42.201Z,1492145742.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:42.238Z,1492145742.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:42.605Z,1492145742.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:42.685Z,1492145742.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:43.055Z,1492145743.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:43.125Z,1492145743.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:43.401Z,1492145743.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:43.417Z,1492145743.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:43.809Z,1492145743.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:43.850Z,1492145743.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:44.207Z,1492145744.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:44.239Z,1492145744.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:44.614Z,1492145744.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:44.629Z,1492145744.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:45.093Z,1492145745.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:45.134Z,1492145745.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:45.417Z,1492145745.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:45.487Z,1492145745.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:45.825Z,1492145745.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:45.840Z,1492145745.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:46.201Z,1492145746.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:46.238Z,1492145746.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:46.601Z,1492145746.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:46.629Z,1492145746.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:47.007Z,1492145747.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:47.108Z,1492145747.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:47.140Z,1492145747.140 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:47.140Z,1492145747.140 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T04:55:47.140Z,1492145747.140 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:55:47.176Z,1492145747.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:55:47.411Z,1492145747.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:47.428Z,1492145747.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:47.485Z,1492145747.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:55:47.485Z,1492145747.485 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T04:55:47.811Z,1492145747.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:47.827Z,1492145747.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:47.833Z,1492145747.833 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:55:47.834Z,1492145747.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:55:47.834Z,1492145747.834 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:55:48.210Z,1492145748.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:48.243Z,1492145748.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:48.604Z,1492145748.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:48.650Z,1492145748.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:49.018Z,1492145749.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:49.060Z,1492145749.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:49.408Z,1492145749.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:49.469Z,1492145749.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:49.841Z,1492145749.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:49.908Z,1492145749.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:50.209Z,1492145750.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:50.246Z,1492145750.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:50.602Z,1492145750.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:50.622Z,1492145750.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:51.001Z,1492145751.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:51.070Z,1492145751.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:51.421Z,1492145751.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:51.516Z,1492145751.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:51.814Z,1492145751.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:51.830Z,1492145751.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:52.209Z,1492145752.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:52.230Z,1492145752.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:52.610Z,1492145752.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:52.626Z,1492145752.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:53.091Z,1492145753.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:53.143Z,1492145753.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:53.416Z,1492145753.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:53.450Z,1492145753.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:53.809Z,1492145753.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:53.879Z,1492145753.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:54.201Z,1492145754.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:54.247Z,1492145754.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:54.607Z,1492145754.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:54.658Z,1492145754.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:55.053Z,1492145755.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:55.137Z,1492145755.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:55.401Z,1492145755.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:55.434Z,1492145755.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:55.790Z,1492145755.790 [NAL9602](INFO): SBD MO Status=2, MOMSN=2107, MT Status=2, MTMSN=0
2017-04-14T04:55:55.790Z,1492145755.790 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T04:55:55.819Z,1492145755.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:55.846Z,1492145755.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:56.212Z,1492145756.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:56.246Z,1492145756.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:56.601Z,1492145756.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:56.639Z,1492145756.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:57.070Z,1492145757.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:57.111Z,1492145757.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:57.410Z,1492145757.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:57.457Z,1492145757.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:57.829Z,1492145757.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:57.873Z,1492145757.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:58.223Z,1492145758.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:58.242Z,1492145758.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:58.601Z,1492145758.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:58.680Z,1492145758.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:59.036Z,1492145759.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:59.095Z,1492145759.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:59.403Z,1492145759.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:59.435Z,1492145759.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:55:59.808Z,1492145759.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:55:59.844Z,1492145759.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:00.215Z,1492145760.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:00.252Z,1492145760.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:00.624Z,1492145760.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:00.651Z,1492145760.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:01.042Z,1492145761.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:01.106Z,1492145761.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:01.408Z,1492145761.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:01.442Z,1492145761.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:01.814Z,1492145761.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:01.830Z,1492145761.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:02.229Z,1492145762.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:02.284Z,1492145762.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:02.601Z,1492145762.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:02.642Z,1492145762.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:03.001Z,1492145763.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:03.034Z,1492145763.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:03.403Z,1492145763.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:03.450Z,1492145763.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:03.831Z,1492145763.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:03.854Z,1492145763.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:04.209Z,1492145764.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:04.247Z,1492145764.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:04.610Z,1492145764.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:04.626Z,1492145764.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:05.009Z,1492145765.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:05.054Z,1492145765.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:05.403Z,1492145765.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:05.438Z,1492145765.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:05.808Z,1492145765.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:05.874Z,1492145765.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:06.218Z,1492145766.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:06.350Z,1492145766.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:06.602Z,1492145766.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:06.655Z,1492145766.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:07.079Z,1492145767.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:07.145Z,1492145767.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:07.445Z,1492145767.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:07.496Z,1492145767.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:07.810Z,1492145767.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:07.863Z,1492145767.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:08.209Z,1492145768.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:08.258Z,1492145768.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:08.615Z,1492145768.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:08.631Z,1492145768.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:09.035Z,1492145769.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:09.084Z,1492145769.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:09.414Z,1492145769.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:09.482Z,1492145769.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:09.816Z,1492145769.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:09.838Z,1492145769.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:10.208Z,1492145770.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:10.233Z,1492145770.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:10.615Z,1492145770.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:10.632Z,1492145770.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:11.044Z,1492145771.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:11.085Z,1492145771.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:11.438Z,1492145771.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:11.457Z,1492145771.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:11.807Z,1492145771.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:11.846Z,1492145771.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:12.216Z,1492145772.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:12.255Z,1492145772.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:12.610Z,1492145772.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:12.644Z,1492145772.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:13.042Z,1492145773.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:13.099Z,1492145773.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:13.408Z,1492145773.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:13.457Z,1492145773.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:13.814Z,1492145773.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:13.872Z,1492145773.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:14.209Z,1492145774.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:14.230Z,1492145774.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:14.613Z,1492145774.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:14.636Z,1492145774.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:15.071Z,1492145775.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:15.124Z,1492145775.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:15.411Z,1492145775.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:15.453Z,1492145775.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:15.802Z,1492145775.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:15.818Z,1492145775.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:16.207Z,1492145776.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:16.242Z,1492145776.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:16.624Z,1492145776.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:16.664Z,1492145776.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:17.010Z,1492145777.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:17.028Z,1492145777.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:17.410Z,1492145777.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:17.433Z,1492145777.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:17.823Z,1492145777.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:17.840Z,1492145777.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:18.230Z,1492145778.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:18.265Z,1492145778.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:18.605Z,1492145778.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:18.630Z,1492145778.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:22.872Z,1492145782.872 [NAL9602](INFO): SBD MO Status=2, MOMSN=2107, MT Status=2, MTMSN=0
2017-04-14T04:56:22.872Z,1492145782.872 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T04:56:22.888Z,1492145782.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:23.052Z,1492145783.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:23.185Z,1492145783.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:23.211Z,1492145783.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:23.560Z,1492145783.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:23.618Z,1492145783.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:23.962Z,1492145783.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:24.005Z,1492145784.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:24.349Z,1492145784.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:24.401Z,1492145784.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:24.754Z,1492145784.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:24.809Z,1492145784.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:25.155Z,1492145785.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:25.196Z,1492145785.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:25.558Z,1492145785.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:25.600Z,1492145785.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:25.962Z,1492145785.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:26.011Z,1492145786.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:26.345Z,1492145786.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:26.382Z,1492145786.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:26.753Z,1492145786.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:26.794Z,1492145786.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:27.157Z,1492145787.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:27.228Z,1492145787.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:27.608Z,1492145787.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:27.638Z,1492145787.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:27.958Z,1492145787.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:28.016Z,1492145788.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:28.351Z,1492145788.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:28.376Z,1492145788.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:28.757Z,1492145788.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:28.802Z,1492145788.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:29.154Z,1492145789.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:29.172Z,1492145789.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:29.572Z,1492145789.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:29.624Z,1492145789.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:29.945Z,1492145789.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:29.988Z,1492145789.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:30.248Z,1492145790.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:30.345Z,1492145790.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:30.384Z,1492145790.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:30.754Z,1492145790.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:30.775Z,1492145790.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:31.044Z,1492145791.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:31.157Z,1492145791.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:31.204Z,1492145791.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:31.562Z,1492145791.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:31.612Z,1492145791.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:31.982Z,1492145791.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:32.047Z,1492145792.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:32.351Z,1492145792.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:32.388Z,1492145792.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:32.746Z,1492145792.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:32.786Z,1492145792.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:33.154Z,1492145793.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:33.172Z,1492145793.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:33.553Z,1492145793.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:33.579Z,1492145793.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:33.962Z,1492145793.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:33.981Z,1492145793.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:34.357Z,1492145794.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:34.375Z,1492145794.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:34.756Z,1492145794.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:34.784Z,1492145794.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:35.169Z,1492145795.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:35.193Z,1492145795.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:35.562Z,1492145795.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:35.580Z,1492145795.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:35.964Z,1492145795.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:35.991Z,1492145795.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:36.347Z,1492145796.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:36.393Z,1492145796.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:36.762Z,1492145796.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:36.829Z,1492145796.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:37.157Z,1492145797.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:37.204Z,1492145797.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:37.549Z,1492145797.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:37.573Z,1492145797.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:37.946Z,1492145797.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:37.997Z,1492145797.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:38.360Z,1492145798.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:38.394Z,1492145798.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:38.753Z,1492145798.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:38.829Z,1492145798.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:39.145Z,1492145799.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:39.260Z,1492145799.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:39.561Z,1492145799.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:39.590Z,1492145799.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:39.954Z,1492145799.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:39.989Z,1492145799.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:40.349Z,1492145800.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:40.422Z,1492145800.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:40.767Z,1492145800.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:40.838Z,1492145800.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:41.199Z,1492145801.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:41.292Z,1492145801.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:41.588Z,1492145801.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:41.657Z,1492145801.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:41.963Z,1492145801.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:41.998Z,1492145801.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:42.382Z,1492145802.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:42.468Z,1492145802.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:42.763Z,1492145802.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:42.986Z,1492145802.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:43.264Z,1492145803.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:43.357Z,1492145803.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:43.648Z,1492145803.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:43.702Z,1492145803.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:44.054Z,1492145804.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:44.147Z,1492145804.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:44.454Z,1492145804.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:44.470Z,1492145804.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:44.837Z,1492145804.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:44.905Z,1492145804.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:45.319Z,1492145805.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:45.348Z,1492145805.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:45.647Z,1492145805.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:45.663Z,1492145805.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:46.046Z,1492145806.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:46.063Z,1492145806.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:46.449Z,1492145806.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:46.467Z,1492145806.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:46.850Z,1492145806.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:46.896Z,1492145806.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:47.372Z,1492145807.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:47.461Z,1492145807.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:47.662Z,1492145807.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:47.707Z,1492145807.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:48.057Z,1492145808.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:48.109Z,1492145808.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:48.447Z,1492145808.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:48.480Z,1492145808.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:48.842Z,1492145808.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:48.941Z,1492145808.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:49.241Z,1492145809.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:49.288Z,1492145809.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:49.682Z,1492145809.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:49.708Z,1492145809.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:50.073Z,1492145810.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:50.093Z,1492145810.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:50.452Z,1492145810.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:50.493Z,1492145810.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:50.847Z,1492145810.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:50.914Z,1492145810.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:51.270Z,1492145811.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:51.358Z,1492145811.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:51.661Z,1492145811.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:51.688Z,1492145811.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:52.090Z,1492145812.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:52.170Z,1492145812.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:52.431Z,1492145812.431 [NAL9602](INFO): SBD MO Status=0, MOMSN=2107, MT Status=0, MTMSN=0
2017-04-14T04:56:52.431Z,1492145812.431 [NAL9602](INFO): No messages in MT queue
2017-04-14T04:56:52.449Z,1492145812.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:52.486Z,1492145812.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:52.854Z,1492145812.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:52.953Z,1492145812.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:53.251Z,1492145813.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:53.296Z,1492145813.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:53.624Z,1492145813.624 [NAL9602](INFO): GPS fix at 20170414T045701: (36.802330, -121.787103)
2017-04-14T04:56:53.641Z,1492145813.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:53.691Z,1492145813.691 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T04:56:53.691Z,1492145813.691 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T04:56:54.051Z,1492145814.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:54.095Z,1492145814.095 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:54.096Z,1492145814.096 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T04:56:54.096Z,1492145814.096 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:56:54.115Z,1492145814.115 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:54.115Z,1492145814.115 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T04:56:54.115Z,1492145814.115 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:56:54.174Z,1492145814.174 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:56:54.174Z,1492145814.174 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:56:54.467Z,1492145814.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:54.543Z,1492145814.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:56:54.544Z,1492145814.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T04:56:54.544Z,1492145814.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:56:54.544Z,1492145814.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T04:56:54.934Z,1492145814.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:54.966Z,1492145814.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:56:54.966Z,1492145814.966 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:56:54.966Z,1492145814.967 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:56:54.990Z,1492145814.990 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:56:55.015Z,1492145815.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:56:55.016Z,1492145815.016 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:56:59.073Z,1492145819.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:59.093Z,1492145819.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:59.180Z,1492145819.180 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0060.lzma
2017-04-14T04:56:59.258Z,1492145819.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:59.380Z,1492145819.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:59.589Z,1492145819.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:56:59.622Z,1492145819.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:56:59.962Z,1492145819.962 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0060.lzma.bak
2017-04-14T04:56:59.962Z,1492145819.962 [DataOverHttps](INFO): SBD MOMSN=4885183
2017-04-14T04:57:00.032Z,1492145820.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:00.076Z,1492145820.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:00.416Z,1492145820.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:00.461Z,1492145820.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:00.788Z,1492145820.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:00.859Z,1492145820.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:01.259Z,1492145821.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:01.340Z,1492145821.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:01.594Z,1492145821.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:01.610Z,1492145821.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:01.993Z,1492145821.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:02.009Z,1492145822.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:07.782Z,1492145827.782 [NAL9602](INFO): Powering down
2017-04-14T04:57:07.803Z,1492145827.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:07.882Z,1492145827.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:08.024Z,1492145828.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:08.059Z,1492145828.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:08.401Z,1492145828.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:08.438Z,1492145828.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:08.814Z,1492145828.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:08.914Z,1492145828.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:09.201Z,1492145829.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:09.256Z,1492145829.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:09.607Z,1492145829.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:09.699Z,1492145829.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:10.010Z,1492145830.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:10.052Z,1492145830.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:10.419Z,1492145830.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:10.479Z,1492145830.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:10.809Z,1492145830.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:10.827Z,1492145830.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:11.224Z,1492145831.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:11.245Z,1492145831.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:11.601Z,1492145831.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:11.633Z,1492145831.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:12.015Z,1492145832.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:12.040Z,1492145832.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:12.430Z,1492145832.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:12.454Z,1492145832.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:17.547Z,1492145837.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:17.563Z,1492145837.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:17.646Z,1492145837.646 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0061.lzma
2017-04-14T04:57:17.682Z,1492145837.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:17.722Z,1492145837.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:18.069Z,1492145838.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:18.120Z,1492145838.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:18.438Z,1492145838.438 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0061.lzma.bak
2017-04-14T04:57:18.438Z,1492145838.438 [DataOverHttps](INFO): SBD MOMSN=4885186
2017-04-14T04:57:18.482Z,1492145838.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:18.538Z,1492145838.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:19.008Z,1492145839.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:19.047Z,1492145839.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:19.082Z,1492145839.082 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T04:57:19.082Z,1492145839.082 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T04:57:19.082Z,1492145839.082 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T04:57:19.289Z,1492145839.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:19.323Z,1492145839.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:23.610Z,1492145843.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:23.705Z,1492145843.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:23.835Z,1492145843.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:23.853Z,1492145843.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:24.172Z,1492145844.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:24.200Z,1492145844.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:24.586Z,1492145844.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:24.626Z,1492145844.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:24.985Z,1492145844.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:25.064Z,1492145845.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:25.369Z,1492145845.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:25.415Z,1492145845.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:25.771Z,1492145845.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:25.823Z,1492145845.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:26.168Z,1492145846.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:26.189Z,1492145846.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:26.559Z,1492145846.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:26.616Z,1492145846.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:26.971Z,1492145846.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:26.988Z,1492145846.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:27.373Z,1492145847.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:27.418Z,1492145847.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:27.828Z,1492145847.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:27.877Z,1492145847.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:28.173Z,1492145848.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:28.197Z,1492145848.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:28.575Z,1492145848.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:28.592Z,1492145848.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:28.973Z,1492145848.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:29.009Z,1492145849.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:29.396Z,1492145849.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:29.427Z,1492145849.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:29.771Z,1492145849.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:29.823Z,1492145849.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:30.185Z,1492145850.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:30.220Z,1492145850.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:30.567Z,1492145850.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:30.582Z,1492145850.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:30.973Z,1492145850.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:30.989Z,1492145850.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:31.385Z,1492145851.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:31.401Z,1492145851.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:31.784Z,1492145851.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:31.815Z,1492145851.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:32.163Z,1492145852.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:32.203Z,1492145852.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:32.575Z,1492145852.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:32.590Z,1492145852.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:32.978Z,1492145852.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:33.004Z,1492145853.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:33.399Z,1492145853.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:33.481Z,1492145853.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:33.777Z,1492145853.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:33.845Z,1492145853.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:34.214Z,1492145854.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:34.243Z,1492145854.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:34.612Z,1492145854.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:34.652Z,1492145854.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:34.966Z,1492145854.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:35.002Z,1492145855.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:35.371Z,1492145855.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:35.410Z,1492145855.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:35.768Z,1492145855.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:35.814Z,1492145855.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:36.168Z,1492145856.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:36.257Z,1492145856.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:36.565Z,1492145856.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:36.586Z,1492145856.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:36.969Z,1492145856.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:36.985Z,1492145856.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:37.417Z,1492145857.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:37.470Z,1492145857.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:37.759Z,1492145857.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:37.858Z,1492145857.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:38.188Z,1492145858.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:38.227Z,1492145858.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:38.558Z,1492145858.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:38.610Z,1492145858.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:38.959Z,1492145858.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:38.998Z,1492145858.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:39.381Z,1492145859.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:39.438Z,1492145859.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:39.773Z,1492145859.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:39.849Z,1492145859.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:40.167Z,1492145860.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:40.221Z,1492145860.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:40.564Z,1492145860.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:40.640Z,1492145860.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:40.960Z,1492145860.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:41.003Z,1492145861.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:41.357Z,1492145861.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:41.410Z,1492145861.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:41.757Z,1492145861.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:41.793Z,1492145861.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:42.163Z,1492145862.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:42.217Z,1492145862.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:42.559Z,1492145862.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:42.612Z,1492145862.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:42.964Z,1492145862.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:42.980Z,1492145862.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:43.369Z,1492145863.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:43.390Z,1492145863.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:43.817Z,1492145863.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:43.833Z,1492145863.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:44.186Z,1492145864.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:44.233Z,1492145864.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:44.655Z,1492145864.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:44.744Z,1492145864.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:45.068Z,1492145865.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:45.121Z,1492145865.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:45.386Z,1492145865.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:45.418Z,1492145865.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:45.778Z,1492145865.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:45.806Z,1492145865.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:46.179Z,1492145866.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:46.234Z,1492145866.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:46.583Z,1492145866.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:46.640Z,1492145866.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:46.979Z,1492145866.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:46.998Z,1492145866.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:47.425Z,1492145867.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:47.478Z,1492145867.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:47.777Z,1492145867.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:47.798Z,1492145867.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:48.192Z,1492145868.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:48.210Z,1492145868.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:48.613Z,1492145868.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:48.654Z,1492145868.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:49.003Z,1492145869.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:49.046Z,1492145869.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:49.382Z,1492145869.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:49.435Z,1492145869.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:49.781Z,1492145869.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:49.802Z,1492145869.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:50.185Z,1492145870.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:50.203Z,1492145870.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:50.585Z,1492145870.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:50.621Z,1492145870.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:50.998Z,1492145870.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:51.036Z,1492145871.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:51.389Z,1492145871.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:51.410Z,1492145871.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:51.784Z,1492145871.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:51.850Z,1492145871.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:52.197Z,1492145872.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:52.215Z,1492145872.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:52.579Z,1492145872.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:52.655Z,1492145872.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:53.008Z,1492145873.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:53.024Z,1492145873.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:53.384Z,1492145873.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:53.437Z,1492145873.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:53.781Z,1492145873.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:53.841Z,1492145873.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:54.116Z,1492145874.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:54.193Z,1492145874.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:54.239Z,1492145874.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:54.599Z,1492145874.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:54.633Z,1492145874.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:54.912Z,1492145874.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:54.994Z,1492145874.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:55.010Z,1492145875.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:55.400Z,1492145875.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:55.472Z,1492145875.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:55.789Z,1492145875.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:55.806Z,1492145875.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:56.187Z,1492145876.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:56.213Z,1492145876.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:56.595Z,1492145876.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:56.654Z,1492145876.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:56.000Z,1492145877.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:57.042Z,1492145877.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:57.383Z,1492145877.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:57.399Z,1492145877.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:57.806Z,1492145877.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:57.870Z,1492145877.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:58.199Z,1492145878.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:58.275Z,1492145878.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:58.613Z,1492145878.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:58.642Z,1492145878.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:58.986Z,1492145878.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:59.072Z,1492145879.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:59.459Z,1492145879.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:59.512Z,1492145879.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:57:59.782Z,1492145879.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:57:59.896Z,1492145879.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:00.181Z,1492145880.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:00.246Z,1492145880.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:00.579Z,1492145880.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:00.621Z,1492145880.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:00.993Z,1492145880.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:01.010Z,1492145881.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:01.378Z,1492145881.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:01.415Z,1492145881.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:01.802Z,1492145881.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:01.870Z,1492145881.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:02.187Z,1492145882.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:02.251Z,1492145882.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:02.585Z,1492145882.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:02.646Z,1492145882.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:03.077Z,1492145883.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:03.173Z,1492145883.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:03.448Z,1492145883.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:03.671Z,1492145883.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:04.006Z,1492145884.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:04.151Z,1492145884.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:04.428Z,1492145884.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:04.502Z,1492145884.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:04.878Z,1492145884.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:04.971Z,1492145884.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:05.248Z,1492145885.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:05.314Z,1492145885.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:05.595Z,1492145885.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:05.746Z,1492145885.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:06.015Z,1492145886.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:06.115Z,1492145886.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:06.401Z,1492145886.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:06.529Z,1492145886.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:06.977Z,1492145886.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:07.029Z,1492145887.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:07.236Z,1492145887.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:07.335Z,1492145887.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:07.710Z,1492145887.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:07.812Z,1492145887.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:08.037Z,1492145888.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:08.174Z,1492145888.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:08.420Z,1492145888.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:08.515Z,1492145888.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:08.794Z,1492145888.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:08.818Z,1492145888.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:09.193Z,1492145889.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:09.312Z,1492145889.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:09.598Z,1492145889.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:09.656Z,1492145889.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:10.016Z,1492145890.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:10.086Z,1492145890.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:10.410Z,1492145890.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:10.482Z,1492145890.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:10.802Z,1492145890.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:10.822Z,1492145890.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:11.268Z,1492145891.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:11.336Z,1492145891.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:11.673Z,1492145891.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:11.723Z,1492145891.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:12.071Z,1492145892.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:12.144Z,1492145892.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:12.401Z,1492145892.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:12.458Z,1492145892.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:12.828Z,1492145892.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:12.900Z,1492145892.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:13.204Z,1492145893.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:13.284Z,1492145893.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:13.613Z,1492145893.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:13.629Z,1492145893.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:13.994Z,1492145893.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:14.026Z,1492145894.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:14.395Z,1492145894.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:14.410Z,1492145894.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:14.874Z,1492145894.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:14.922Z,1492145894.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:15.203Z,1492145895.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:15.238Z,1492145895.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:15.593Z,1492145895.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:15.630Z,1492145895.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:15.993Z,1492145895.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:16.080Z,1492145896.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:16.405Z,1492145896.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:16.448Z,1492145896.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:16.858Z,1492145896.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:16.917Z,1492145896.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:17.193Z,1492145897.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:17.226Z,1492145897.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:17.626Z,1492145897.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:17.670Z,1492145897.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:17.994Z,1492145897.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:18.073Z,1492145898.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:18.412Z,1492145898.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:18.521Z,1492145898.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:18.897Z,1492145898.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:18.922Z,1492145898.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:19.197Z,1492145899.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:19.268Z,1492145899.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:19.598Z,1492145899.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:19.702Z,1492145899.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:20.006Z,1492145900.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:20.030Z,1492145900.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:20.402Z,1492145900.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:20.446Z,1492145900.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:20.862Z,1492145900.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:20.918Z,1492145900.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:24.730Z,1492145904.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:24.746Z,1492145904.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:24.889Z,1492145904.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:24.945Z,1492145904.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:25.244Z,1492145905.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:25.308Z,1492145905.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:25.657Z,1492145905.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:25.679Z,1492145905.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:26.067Z,1492145906.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:26.106Z,1492145906.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:26.428Z,1492145906.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:26.474Z,1492145906.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:26.836Z,1492145906.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:26.885Z,1492145906.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:27.271Z,1492145907.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:27.302Z,1492145907.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:27.656Z,1492145907.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:27.690Z,1492145907.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:28.058Z,1492145908.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:28.096Z,1492145908.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:28.451Z,1492145908.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:28.469Z,1492145908.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:28.859Z,1492145908.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:28.910Z,1492145908.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:29.250Z,1492145909.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:29.278Z,1492145909.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:29.652Z,1492145909.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:29.674Z,1492145909.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:30.037Z,1492145910.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:30.073Z,1492145910.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:30.445Z,1492145910.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:30.470Z,1492145910.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:30.829Z,1492145910.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:30.870Z,1492145910.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:31.259Z,1492145911.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:31.297Z,1492145911.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:31.645Z,1492145911.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:31.673Z,1492145911.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:32.038Z,1492145912.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:32.056Z,1492145912.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:32.449Z,1492145912.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:32.488Z,1492145912.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:32.845Z,1492145912.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:32.867Z,1492145912.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:33.246Z,1492145913.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:33.264Z,1492145913.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:33.647Z,1492145913.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:33.663Z,1492145913.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:34.047Z,1492145914.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:34.069Z,1492145914.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:34.442Z,1492145914.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:34.460Z,1492145914.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:34.861Z,1492145914.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:34.907Z,1492145914.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:35.237Z,1492145915.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:35.275Z,1492145915.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:35.638Z,1492145915.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:35.722Z,1492145915.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:36.034Z,1492145916.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:36.071Z,1492145916.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:36.440Z,1492145916.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:36.456Z,1492145916.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:36.838Z,1492145916.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:36.853Z,1492145916.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:37.317Z,1492145917.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:37.363Z,1492145917.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:37.694Z,1492145917.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:37.882Z,1492145917.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:38.178Z,1492145918.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:38.257Z,1492145918.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:38.521Z,1492145918.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:38.642Z,1492145918.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:38.888Z,1492145918.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:38.937Z,1492145918.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:39.276Z,1492145919.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:39.379Z,1492145919.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:39.721Z,1492145919.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:39.794Z,1492145919.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:40.070Z,1492145920.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:40.087Z,1492145920.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:40.500Z,1492145920.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:40.639Z,1492145920.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:40.894Z,1492145920.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:41.016Z,1492145921.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:41.269Z,1492145921.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:41.306Z,1492145921.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:41.674Z,1492145921.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:41.702Z,1492145921.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:42.069Z,1492145922.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:42.106Z,1492145922.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:42.469Z,1492145922.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:42.501Z,1492145922.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:42.869Z,1492145922.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:42.902Z,1492145922.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:43.281Z,1492145923.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:43.308Z,1492145923.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:43.669Z,1492145923.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:43.706Z,1492145923.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:44.082Z,1492145924.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:44.118Z,1492145924.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:44.473Z,1492145924.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:44.502Z,1492145924.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:44.879Z,1492145924.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:44.895Z,1492145924.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:45.280Z,1492145925.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:45.296Z,1492145925.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:45.679Z,1492145925.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:45.694Z,1492145925.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:46.078Z,1492145926.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:46.098Z,1492145926.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:46.478Z,1492145926.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:46.493Z,1492145926.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:46.878Z,1492145926.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:46.902Z,1492145926.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:47.278Z,1492145927.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:47.294Z,1492145927.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:47.687Z,1492145927.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:47.702Z,1492145927.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:48.083Z,1492145928.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:48.099Z,1492145928.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:48.106Z,1492145928.106 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:48.107Z,1492145928.107 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T04:58:48.107Z,1492145928.107 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T04:58:48.137Z,1492145928.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T04:58:48.487Z,1492145928.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:48.503Z,1492145928.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:48.539Z,1492145928.539 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T04:58:48.539Z,1492145928.539 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T04:58:48.871Z,1492145928.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:48.900Z,1492145928.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:48.906Z,1492145928.906 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T04:58:48.907Z,1492145928.907 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:58:48.907Z,1492145928.907 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:58:49.271Z,1492145929.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:49.308Z,1492145929.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:49.674Z,1492145929.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:49.703Z,1492145929.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:50.073Z,1492145930.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:50.106Z,1492145930.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:50.470Z,1492145930.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:50.509Z,1492145930.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:50.874Z,1492145930.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:50.913Z,1492145930.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:51.272Z,1492145931.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:51.310Z,1492145931.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:51.504Z,1492145931.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:51.669Z,1492145931.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:51.757Z,1492145931.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:52.069Z,1492145932.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:52.086Z,1492145932.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:52.301Z,1492145932.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:52.479Z,1492145932.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:52.496Z,1492145932.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:52.876Z,1492145932.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:52.929Z,1492145932.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:53.278Z,1492145933.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:53.294Z,1492145933.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:53.681Z,1492145933.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:53.733Z,1492145933.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:54.078Z,1492145934.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:54.137Z,1492145934.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:54.482Z,1492145934.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:54.502Z,1492145934.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:54.878Z,1492145934.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:54.893Z,1492145934.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:55.281Z,1492145935.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:55.297Z,1492145935.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:55.672Z,1492145935.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:55.703Z,1492145935.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:56.069Z,1492145936.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:56.106Z,1492145936.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:56.469Z,1492145936.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:56.495Z,1492145936.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:56.869Z,1492145936.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:56.897Z,1492145936.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:57.270Z,1492145937.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:57.305Z,1492145937.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:57.666Z,1492145937.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:57.705Z,1492145937.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:58.074Z,1492145938.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:58.090Z,1492145938.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:58.474Z,1492145938.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:58.489Z,1492145938.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:58.876Z,1492145938.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:58.891Z,1492145938.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:59.281Z,1492145939.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:59.302Z,1492145939.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:58:59.681Z,1492145939.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:58:59.696Z,1492145939.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:00.079Z,1492145940.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:00.094Z,1492145940.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:00.477Z,1492145940.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:00.493Z,1492145940.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:00.878Z,1492145940.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:00.898Z,1492145940.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:01.269Z,1492145941.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:01.296Z,1492145941.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:01.681Z,1492145941.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:01.697Z,1492145941.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:02.069Z,1492145942.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:02.098Z,1492145942.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:02.469Z,1492145942.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:02.496Z,1492145942.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:02.869Z,1492145942.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:02.904Z,1492145942.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:03.277Z,1492145943.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:03.304Z,1492145943.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:03.669Z,1492145943.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:03.705Z,1492145943.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:04.077Z,1492145944.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:04.104Z,1492145944.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:04.469Z,1492145944.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:04.505Z,1492145944.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:04.878Z,1492145944.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:04.905Z,1492145944.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:05.269Z,1492145945.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:05.306Z,1492145945.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:05.695Z,1492145945.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:05.713Z,1492145945.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:06.069Z,1492145946.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:06.131Z,1492145946.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:06.470Z,1492145946.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:06.518Z,1492145946.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:06.869Z,1492145946.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:06.890Z,1492145946.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:07.269Z,1492145947.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:07.284Z,1492145947.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:07.677Z,1492145947.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:07.734Z,1492145947.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:08.076Z,1492145948.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:08.091Z,1492145948.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:08.476Z,1492145948.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:08.520Z,1492145948.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:08.877Z,1492145948.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:08.929Z,1492145948.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:09.282Z,1492145949.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:09.298Z,1492145949.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:09.677Z,1492145949.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:09.698Z,1492145949.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:10.081Z,1492145950.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:10.097Z,1492145950.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:10.477Z,1492145950.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:10.493Z,1492145950.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:10.877Z,1492145950.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:10.893Z,1492145950.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:11.275Z,1492145951.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:11.304Z,1492145951.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:11.684Z,1492145951.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:11.699Z,1492145951.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:12.078Z,1492145952.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:12.098Z,1492145952.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:12.487Z,1492145952.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:12.537Z,1492145952.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:12.871Z,1492145952.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:12.923Z,1492145952.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:13.271Z,1492145953.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:13.342Z,1492145953.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:13.671Z,1492145953.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:13.711Z,1492145953.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:14.077Z,1492145954.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:14.099Z,1492145954.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:14.483Z,1492145954.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:14.498Z,1492145954.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:14.900Z,1492145954.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:14.926Z,1492145954.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:15.286Z,1492145955.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:15.302Z,1492145955.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:15.677Z,1492145955.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:15.692Z,1492145955.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:16.085Z,1492145956.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:16.106Z,1492145956.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:16.481Z,1492145956.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:16.497Z,1492145956.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:16.878Z,1492145956.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:16.902Z,1492145956.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:17.280Z,1492145957.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:17.301Z,1492145957.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:17.669Z,1492145957.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:17.704Z,1492145957.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:18.071Z,1492145958.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:18.106Z,1492145958.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:18.471Z,1492145958.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:18.498Z,1492145958.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:18.869Z,1492145958.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:18.902Z,1492145958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:19.269Z,1492145959.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:19.336Z,1492145959.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:19.671Z,1492145959.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:19.720Z,1492145959.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:25.196Z,1492145965.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:25.262Z,1492145965.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:25.374Z,1492145965.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:25.418Z,1492145965.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:25.737Z,1492145965.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:25.764Z,1492145965.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:26.137Z,1492145966.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:26.170Z,1492145966.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:26.537Z,1492145966.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:26.567Z,1492145966.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:26.942Z,1492145966.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:26.959Z,1492145966.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:27.341Z,1492145967.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:27.400Z,1492145967.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:27.741Z,1492145967.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:27.757Z,1492145967.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:28.140Z,1492145968.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:28.190Z,1492145968.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:28.541Z,1492145968.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:28.557Z,1492145968.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:28.935Z,1492145968.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:29.001Z,1492145969.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:29.343Z,1492145969.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:29.359Z,1492145969.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:29.748Z,1492145969.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:29.764Z,1492145969.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:30.141Z,1492145970.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:30.157Z,1492145970.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:30.535Z,1492145970.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:30.572Z,1492145970.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:30.933Z,1492145970.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:30.970Z,1492145970.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:31.333Z,1492145971.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:31.365Z,1492145971.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:31.762Z,1492145971.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:31.783Z,1492145971.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:32.140Z,1492145972.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:32.167Z,1492145972.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:32.551Z,1492145972.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:32.640Z,1492145972.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:32.952Z,1492145972.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:33.086Z,1492145973.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:33.398Z,1492145973.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:33.461Z,1492145973.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:33.751Z,1492145973.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:33.790Z,1492145973.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:34.135Z,1492145974.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:34.173Z,1492145974.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:34.536Z,1492145974.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:34.601Z,1492145974.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:35.020Z,1492145975.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:35.054Z,1492145975.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:35.338Z,1492145975.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:35.377Z,1492145975.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:35.741Z,1492145975.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:35.771Z,1492145975.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:36.138Z,1492145976.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:36.154Z,1492145976.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:36.539Z,1492145976.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:36.555Z,1492145976.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:36.957Z,1492145976.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:36.973Z,1492145976.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:37.333Z,1492145977.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:37.364Z,1492145977.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:37.753Z,1492145977.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:37.769Z,1492145977.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:38.133Z,1492145978.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:38.166Z,1492145978.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:38.537Z,1492145978.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:38.566Z,1492145978.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:38.935Z,1492145978.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:38.974Z,1492145978.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:39.338Z,1492145979.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:39.358Z,1492145979.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:39.741Z,1492145979.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:39.782Z,1492145979.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:40.142Z,1492145980.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:40.182Z,1492145980.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:40.711Z,1492145980.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:40.906Z,1492145980.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:41.083Z,1492145981.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:41.222Z,1492145981.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:41.433Z,1492145981.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:41.474Z,1492145981.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:41.845Z,1492145981.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:41.876Z,1492145981.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:42.247Z,1492145982.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:42.309Z,1492145982.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:42.702Z,1492145982.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:42.780Z,1492145982.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:43.052Z,1492145983.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:43.144Z,1492145983.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:43.472Z,1492145983.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:43.536Z,1492145983.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:43.843Z,1492145983.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:43.888Z,1492145983.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:44.246Z,1492145984.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:44.292Z,1492145984.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:44.646Z,1492145984.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:44.760Z,1492145984.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:45.037Z,1492145985.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:45.084Z,1492145985.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:45.442Z,1492145985.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:45.534Z,1492145985.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:45.830Z,1492145985.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:45.847Z,1492145985.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:46.242Z,1492145986.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:46.291Z,1492145986.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:46.637Z,1492145986.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:46.654Z,1492145986.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:47.042Z,1492145987.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:47.140Z,1492145987.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:47.452Z,1492145987.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:47.490Z,1492145987.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:47.845Z,1492145987.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:47.874Z,1492145987.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:48.246Z,1492145988.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:48.273Z,1492145988.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:48.635Z,1492145988.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:48.679Z,1492145988.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:49.035Z,1492145989.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:49.087Z,1492145989.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:49.438Z,1492145989.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:49.466Z,1492145989.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:49.840Z,1492145989.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:49.855Z,1492145989.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:50.240Z,1492145990.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:50.255Z,1492145990.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:50.693Z,1492145990.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:50.742Z,1492145990.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:51.037Z,1492145991.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:51.059Z,1492145991.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:51.445Z,1492145991.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:51.463Z,1492145991.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:51.849Z,1492145991.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:51.892Z,1492145991.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:52.233Z,1492145992.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:52.261Z,1492145992.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:52.714Z,1492145992.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:52.776Z,1492145992.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:53.041Z,1492145993.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:53.085Z,1492145993.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:53.444Z,1492145993.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:53.464Z,1492145993.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:53.835Z,1492145993.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:53.909Z,1492145993.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:54.242Z,1492145994.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:54.258Z,1492145994.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:54.680Z,1492145994.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:54.712Z,1492145994.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:55.045Z,1492145995.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:55.098Z,1492145995.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:55.098Z,1492145995.098 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T04:59:55.098Z,1492145995.098 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T04:59:55.105Z,1492145995.105 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:55.105Z,1492145995.105 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T04:59:55.105Z,1492145995.105 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T04:59:55.132Z,1492145995.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T04:59:55.132Z,1492145995.132 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T04:59:55.442Z,1492145995.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:55.543Z,1492145995.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T04:59:55.544Z,1492145995.543 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T04:59:55.544Z,1492145995.544 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T04:59:55.544Z,1492145995.544 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T04:59:55.833Z,1492145995.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:55.894Z,1492145995.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T04:59:55.895Z,1492145995.895 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:59:55.907Z,1492145995.907 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:59:55.912Z,1492145995.912 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T04:59:55.913Z,1492145995.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T04:59:55.913Z,1492145995.913 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T04:59:56.241Z,1492145996.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:56.280Z,1492145996.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:56.676Z,1492145996.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:56.745Z,1492145996.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:57.041Z,1492145997.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:57.082Z,1492145997.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:57.438Z,1492145997.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:57.502Z,1492145997.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:57.840Z,1492145997.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:57.895Z,1492145997.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:58.240Z,1492145998.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:58.256Z,1492145998.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:58.685Z,1492145998.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:58.740Z,1492145998.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:59.037Z,1492145999.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:59.080Z,1492145999.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:59.437Z,1492145999.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:59.475Z,1492145999.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T04:59:59.837Z,1492145999.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T04:59:59.884Z,1492145999.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:00.230Z,1492146000.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:00.246Z,1492146000.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:00.639Z,1492146000.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:00.670Z,1492146000.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:01.038Z,1492146001.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:01.058Z,1492146001.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:01.433Z,1492146001.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:01.484Z,1492146001.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:01.836Z,1492146001.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:01.873Z,1492146001.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:02.233Z,1492146002.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:02.314Z,1492146002.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:02.633Z,1492146002.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:02.657Z,1492146002.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:03.033Z,1492146003.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:03.079Z,1492146003.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:03.450Z,1492146003.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:03.478Z,1492146003.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:03.831Z,1492146003.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:03.897Z,1492146003.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:04.233Z,1492146004.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:04.287Z,1492146004.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:04.676Z,1492146004.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:04.708Z,1492146004.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:05.038Z,1492146005.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:05.089Z,1492146005.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:05.446Z,1492146005.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:05.496Z,1492146005.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:05.845Z,1492146005.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:05.865Z,1492146005.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:06.239Z,1492146006.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:06.269Z,1492146006.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:06.670Z,1492146006.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:06.715Z,1492146006.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:07.045Z,1492146007.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:07.068Z,1492146007.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:07.449Z,1492146007.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:07.474Z,1492146007.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:07.845Z,1492146007.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:07.869Z,1492146007.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:08.233Z,1492146008.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:08.268Z,1492146008.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:08.656Z,1492146008.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:08.713Z,1492146008.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:09.033Z,1492146009.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:09.085Z,1492146009.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:09.437Z,1492146009.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:09.474Z,1492146009.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:09.837Z,1492146009.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:09.942Z,1492146009.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:10.236Z,1492146010.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:10.277Z,1492146010.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:10.676Z,1492146010.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:10.738Z,1492146010.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:11.039Z,1492146011.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:11.083Z,1492146011.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:11.433Z,1492146011.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:11.490Z,1492146011.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:11.839Z,1492146011.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:11.894Z,1492146011.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:12.234Z,1492146012.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:12.250Z,1492146012.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:12.742Z,1492146012.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:12.776Z,1492146012.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:13.034Z,1492146013.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:13.095Z,1492146013.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:13.474Z,1492146013.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:13.551Z,1492146013.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:13.841Z,1492146013.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:13.872Z,1492146013.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:14.235Z,1492146014.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:14.286Z,1492146014.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:14.635Z,1492146014.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:14.650Z,1492146014.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:15.043Z,1492146015.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:15.173Z,1492146015.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:15.442Z,1492146015.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:15.521Z,1492146015.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:15.839Z,1492146015.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:15.912Z,1492146015.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:16.235Z,1492146016.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:16.297Z,1492146016.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:16.672Z,1492146016.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:16.688Z,1492146016.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:17.121Z,1492146017.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:17.221Z,1492146017.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:17.445Z,1492146017.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:17.464Z,1492146017.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:17.848Z,1492146017.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:17.900Z,1492146017.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:18.235Z,1492146018.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:18.286Z,1492146018.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:18.664Z,1492146018.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:18.682Z,1492146018.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:19.076Z,1492146019.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:19.110Z,1492146019.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:19.476Z,1492146019.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:19.493Z,1492146019.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:19.874Z,1492146019.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:19.892Z,1492146019.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:24.238Z,1492146024.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:24.313Z,1492146024.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:24.413Z,1492146024.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:24.446Z,1492146024.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:24.810Z,1492146024.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:24.827Z,1492146024.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:25.207Z,1492146025.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:25.258Z,1492146025.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:25.589Z,1492146025.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:25.624Z,1492146025.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:25.989Z,1492146025.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:26.061Z,1492146026.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:26.400Z,1492146026.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:26.461Z,1492146026.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:26.818Z,1492146026.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:26.835Z,1492146026.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:27.197Z,1492146027.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:27.230Z,1492146027.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:27.598Z,1492146027.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:27.630Z,1492146027.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:27.990Z,1492146027.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:28.006Z,1492146028.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:28.394Z,1492146028.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:28.432Z,1492146028.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:28.800Z,1492146028.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:28.848Z,1492146028.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:29.200Z,1492146029.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:29.260Z,1492146029.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:29.600Z,1492146029.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:29.623Z,1492146029.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:29.992Z,1492146029.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:30.028Z,1492146030.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:30.391Z,1492146030.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:30.434Z,1492146030.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:30.793Z,1492146030.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:30.850Z,1492146030.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:31.195Z,1492146031.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:31.216Z,1492146031.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:31.606Z,1492146031.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:31.622Z,1492146031.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:31.998Z,1492146031.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:32.026Z,1492146032.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:32.422Z,1492146032.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:32.456Z,1492146032.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:32.812Z,1492146032.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:32.834Z,1492146032.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:33.212Z,1492146033.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:33.234Z,1492146033.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:33.625Z,1492146033.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:33.650Z,1492146033.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:33.999Z,1492146033.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:34.038Z,1492146034.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:34.400Z,1492146034.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:34.431Z,1492146034.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:34.802Z,1492146034.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:34.822Z,1492146034.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:35.189Z,1492146035.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:35.207Z,1492146035.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:35.598Z,1492146035.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:35.646Z,1492146035.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:35.996Z,1492146035.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:36.013Z,1492146036.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:36.402Z,1492146036.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:36.419Z,1492146036.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:36.807Z,1492146036.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:36.824Z,1492146036.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:37.197Z,1492146037.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:37.226Z,1492146037.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:37.589Z,1492146037.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:37.630Z,1492146037.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:38.002Z,1492146038.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:38.032Z,1492146038.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:38.389Z,1492146038.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:38.420Z,1492146038.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:38.813Z,1492146038.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:38.911Z,1492146038.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:39.194Z,1492146039.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:39.210Z,1492146039.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:39.595Z,1492146039.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:39.661Z,1492146039.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:39.994Z,1492146039.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:40.009Z,1492146040.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:40.398Z,1492146040.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:40.473Z,1492146040.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:40.797Z,1492146040.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:40.845Z,1492146040.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:41.197Z,1492146041.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:41.218Z,1492146041.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:41.598Z,1492146041.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:41.613Z,1492146041.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:41.989Z,1492146041.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:42.017Z,1492146042.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:42.389Z,1492146042.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:42.426Z,1492146042.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:42.799Z,1492146042.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:42.830Z,1492146042.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:43.192Z,1492146043.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:43.230Z,1492146043.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:43.601Z,1492146043.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:43.616Z,1492146043.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:43.986Z,1492146043.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:44.019Z,1492146044.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:44.389Z,1492146044.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:44.433Z,1492146044.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:44.794Z,1492146044.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:44.823Z,1492146044.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:45.198Z,1492146045.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:45.257Z,1492146045.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:45.594Z,1492146045.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:45.610Z,1492146045.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:45.997Z,1492146045.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:46.014Z,1492146046.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:46.399Z,1492146046.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:46.427Z,1492146046.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:46.790Z,1492146046.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:46.831Z,1492146046.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:47.202Z,1492146047.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:47.252Z,1492146047.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:47.598Z,1492146047.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:47.613Z,1492146047.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:47.999Z,1492146047.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:48.033Z,1492146048.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:48.400Z,1492146048.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:48.438Z,1492146048.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:48.840Z,1492146048.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:48.917Z,1492146048.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:49.214Z,1492146049.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:49.259Z,1492146049.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:49.599Z,1492146049.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:49.639Z,1492146049.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:49.999Z,1492146049.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:50.021Z,1492146050.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:50.401Z,1492146050.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:50.422Z,1492146050.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:50.807Z,1492146050.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:50.822Z,1492146050.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:51.209Z,1492146051.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:51.225Z,1492146051.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:51.599Z,1492146051.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:51.620Z,1492146051.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:52.001Z,1492146052.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:52.022Z,1492146052.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:52.402Z,1492146052.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:52.417Z,1492146052.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:52.789Z,1492146052.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:52.874Z,1492146052.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:53.189Z,1492146053.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:53.228Z,1492146053.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:53.589Z,1492146053.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:53.646Z,1492146053.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:53.990Z,1492146053.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:54.022Z,1492146054.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:54.416Z,1492146054.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:54.455Z,1492146054.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:54.789Z,1492146054.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:54.838Z,1492146054.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:55.189Z,1492146055.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:55.205Z,1492146055.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:55.597Z,1492146055.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:55.638Z,1492146055.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:55.993Z,1492146055.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:56.008Z,1492146056.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:56.393Z,1492146056.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:56.408Z,1492146056.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:56.793Z,1492146056.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:56.814Z,1492146056.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:57.189Z,1492146057.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:57.225Z,1492146057.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:57.586Z,1492146057.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:57.602Z,1492146057.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:57.993Z,1492146057.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:58.036Z,1492146058.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:58.393Z,1492146058.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:58.408Z,1492146058.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:58.791Z,1492146058.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:58.809Z,1492146058.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:59.198Z,1492146059.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:59.213Z,1492146059.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:59.589Z,1492146059.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:00:59.626Z,1492146059.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:00:59.990Z,1492146059.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:00.018Z,1492146060.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:00.394Z,1492146060.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:00.430Z,1492146060.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:00.801Z,1492146060.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:00.816Z,1492146060.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:01.201Z,1492146061.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:01.223Z,1492146061.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:01.614Z,1492146061.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:01.634Z,1492146061.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:02.009Z,1492146062.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:02.024Z,1492146062.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:02.393Z,1492146062.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:02.421Z,1492146062.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:02.789Z,1492146062.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:02.826Z,1492146062.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:03.193Z,1492146063.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:03.211Z,1492146063.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:03.601Z,1492146063.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:03.633Z,1492146063.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:03.997Z,1492146063.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:04.018Z,1492146064.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:04.399Z,1492146064.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:04.423Z,1492146064.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:04.801Z,1492146064.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:04.838Z,1492146064.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:05.211Z,1492146065.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:05.245Z,1492146065.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:05.635Z,1492146065.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:05.732Z,1492146065.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:06.010Z,1492146066.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:06.065Z,1492146066.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:06.417Z,1492146066.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:06.447Z,1492146066.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:06.806Z,1492146066.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:06.877Z,1492146066.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:07.190Z,1492146067.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:07.218Z,1492146067.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:07.590Z,1492146067.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:07.626Z,1492146067.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:07.989Z,1492146067.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:08.042Z,1492146068.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:08.390Z,1492146068.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:08.424Z,1492146068.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:08.789Z,1492146068.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:08.861Z,1492146068.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:09.192Z,1492146069.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:09.243Z,1492146069.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:09.586Z,1492146069.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:09.602Z,1492146069.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:09.995Z,1492146069.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:10.077Z,1492146070.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:10.391Z,1492146070.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:10.427Z,1492146070.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:10.791Z,1492146070.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:10.903Z,1492146070.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:11.196Z,1492146071.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:11.231Z,1492146071.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:11.594Z,1492146071.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:11.610Z,1492146071.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:12.003Z,1492146072.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:12.027Z,1492146072.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:12.395Z,1492146072.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:12.457Z,1492146072.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:12.798Z,1492146072.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:12.927Z,1492146072.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:13.216Z,1492146073.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:13.299Z,1492146073.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:13.614Z,1492146073.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:13.806Z,1492146073.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:14.016Z,1492146074.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:14.060Z,1492146074.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:14.391Z,1492146074.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:14.460Z,1492146074.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:14.799Z,1492146074.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:14.877Z,1492146074.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:15.212Z,1492146075.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:15.273Z,1492146075.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:15.607Z,1492146075.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:15.812Z,1492146075.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:16.112Z,1492146076.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:16.276Z,1492146076.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:16.689Z,1492146076.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:16.842Z,1492146076.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:17.320Z,1492146077.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:17.521Z,1492146077.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:17.790Z,1492146077.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:17.893Z,1492146077.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:18.154Z,1492146078.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:18.260Z,1492146078.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:18.633Z,1492146078.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:18.714Z,1492146078.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:18.973Z,1492146078.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:19.022Z,1492146079.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:19.377Z,1492146079.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:19.501Z,1492146079.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:19.793Z,1492146079.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:19.919Z,1492146079.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:20.269Z,1492146080.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:20.544Z,1492146080.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:23.820Z,1492146083.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:24.616Z,1492146084.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:26.451Z,1492146086.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:26.460Z,1492146086.460 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:01:26.460Z,1492146086.460 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:01:26.460Z,1492146086.460 [BPC1](ERROR): Communications Fault
2017-04-14T05:01:26.469Z,1492146086.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:26.552Z,1492146086.552 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:01:26.623Z,1492146086.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:26.656Z,1492146086.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:27.006Z,1492146087.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:27.023Z,1492146087.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:27.390Z,1492146087.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:27.418Z,1492146087.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:27.438Z,1492146087.438 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:01:27.438Z,1492146087.438 [BPC1] No Fault, FailCount= 1
2017-04-14T05:01:27.793Z,1492146087.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:27.874Z,1492146087.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:28.190Z,1492146088.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:28.223Z,1492146088.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:28.585Z,1492146088.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:28.623Z,1492146088.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:28.994Z,1492146088.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:29.022Z,1492146089.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:29.388Z,1492146089.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:29.425Z,1492146089.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:29.796Z,1492146089.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:29.832Z,1492146089.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:30.194Z,1492146090.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:30.251Z,1492146090.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:30.606Z,1492146090.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:30.634Z,1492146090.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:30.987Z,1492146090.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:31.035Z,1492146091.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:31.406Z,1492146091.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:31.451Z,1492146091.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:31.807Z,1492146091.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:31.842Z,1492146091.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:32.198Z,1492146092.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:32.214Z,1492146092.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:32.593Z,1492146092.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:32.609Z,1492146092.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:32.997Z,1492146092.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:33.033Z,1492146093.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:33.397Z,1492146093.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:33.434Z,1492146093.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:33.798Z,1492146093.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:33.828Z,1492146093.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:34.190Z,1492146094.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:34.205Z,1492146094.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:34.592Z,1492146094.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:34.607Z,1492146094.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:34.997Z,1492146094.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:35.012Z,1492146095.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:35.391Z,1492146095.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:35.418Z,1492146095.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:35.784Z,1492146095.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:35.820Z,1492146095.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:36.190Z,1492146096.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:36.206Z,1492146096.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:36.605Z,1492146096.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:36.640Z,1492146096.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:36.992Z,1492146096.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:37.012Z,1492146097.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:37.394Z,1492146097.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:37.410Z,1492146097.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:37.798Z,1492146097.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:37.819Z,1492146097.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:38.204Z,1492146098.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:38.220Z,1492146098.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:38.646Z,1492146098.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:38.676Z,1492146098.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:39.026Z,1492146099.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:39.061Z,1492146099.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:39.396Z,1492146099.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:39.414Z,1492146099.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:39.794Z,1492146099.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:39.825Z,1492146099.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:40.211Z,1492146100.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:40.227Z,1492146100.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:40.611Z,1492146100.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:40.629Z,1492146100.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:41.058Z,1492146101.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:41.213Z,1492146101.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:41.413Z,1492146101.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:41.562Z,1492146101.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:41.827Z,1492146101.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:41.952Z,1492146101.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:42.190Z,1492146102.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:42.235Z,1492146102.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:42.603Z,1492146102.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:42.674Z,1492146102.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:43.031Z,1492146103.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:43.110Z,1492146103.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:43.444Z,1492146103.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:43.560Z,1492146103.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:43.819Z,1492146103.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:43.850Z,1492146103.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:44.211Z,1492146104.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:44.300Z,1492146104.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:44.601Z,1492146104.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:44.617Z,1492146104.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:45.024Z,1492146105.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:45.074Z,1492146105.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:45.387Z,1492146105.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:45.419Z,1492146105.419 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:01:45.419Z,1492146105.419 [BPC1] Communications Fault, FailCount= 2
2017-04-14T05:01:45.419Z,1492146105.420 [BPC1](ERROR): Communications Fault
2017-04-14T05:01:45.470Z,1492146105.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:45.524Z,1492146105.524 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:01:45.786Z,1492146105.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:45.833Z,1492146105.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:46.211Z,1492146106.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:46.231Z,1492146106.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:46.603Z,1492146106.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:46.632Z,1492146106.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:46.670Z,1492146106.670 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:01:46.670Z,1492146106.670 [BPC1] No Fault, FailCount= 2
2017-04-14T05:01:46.987Z,1492146106.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:47.092Z,1492146107.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:47.401Z,1492146107.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:47.455Z,1492146107.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:47.800Z,1492146107.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:47.824Z,1492146107.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:48.192Z,1492146108.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:48.214Z,1492146108.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:48.612Z,1492146108.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:48.692Z,1492146108.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:49.008Z,1492146109.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:49.057Z,1492146109.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:49.097Z,1492146109.097 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:49.097Z,1492146109.097 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:01:49.097Z,1492146109.097 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:01:49.168Z,1492146109.168 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:01:49.414Z,1492146109.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:49.505Z,1492146109.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:49.604Z,1492146109.604 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:01:49.604Z,1492146109.604 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:01:49.802Z,1492146109.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:49.860Z,1492146109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:49.866Z,1492146109.866 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:01:49.867Z,1492146109.867 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:01:49.868Z,1492146109.868 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:01:50.227Z,1492146110.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:50.254Z,1492146110.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:50.634Z,1492146110.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:50.678Z,1492146110.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:50.996Z,1492146110.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:51.019Z,1492146111.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:51.397Z,1492146111.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:51.457Z,1492146111.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:51.828Z,1492146111.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:51.939Z,1492146111.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:52.227Z,1492146112.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:52.320Z,1492146112.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:52.592Z,1492146112.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:52.633Z,1492146112.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:53.027Z,1492146113.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:53.112Z,1492146113.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:53.393Z,1492146113.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:53.425Z,1492146113.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:53.808Z,1492146113.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:53.849Z,1492146113.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:54.216Z,1492146114.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:54.344Z,1492146114.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:54.588Z,1492146114.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:54.640Z,1492146114.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:54.989Z,1492146114.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:55.082Z,1492146115.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:55.443Z,1492146115.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:55.584Z,1492146115.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:55.872Z,1492146115.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:55.925Z,1492146115.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:56.304Z,1492146116.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:56.533Z,1492146116.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:56.932Z,1492146116.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:57.029Z,1492146117.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:57.291Z,1492146117.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:57.382Z,1492146117.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:57.706Z,1492146117.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:57.778Z,1492146117.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:58.074Z,1492146118.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:58.156Z,1492146118.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:58.500Z,1492146118.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:58.635Z,1492146118.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:58.910Z,1492146118.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:58.985Z,1492146118.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:59.287Z,1492146119.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:59.361Z,1492146119.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:01:59.676Z,1492146119.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:01:59.710Z,1492146119.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:00.073Z,1492146120.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:00.141Z,1492146120.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:00.588Z,1492146120.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:00.659Z,1492146120.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:00.885Z,1492146120.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:00.923Z,1492146120.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:01.285Z,1492146121.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:01.313Z,1492146121.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:01.674Z,1492146121.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:01.733Z,1492146121.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:02.073Z,1492146122.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:02.106Z,1492146122.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:02.521Z,1492146122.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:02.573Z,1492146122.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:02.893Z,1492146122.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:02.910Z,1492146122.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:03.273Z,1492146123.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:03.312Z,1492146123.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:03.682Z,1492146123.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:03.716Z,1492146123.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:04.071Z,1492146124.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:04.120Z,1492146124.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:04.547Z,1492146124.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:04.598Z,1492146124.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:04.873Z,1492146124.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:04.923Z,1492146124.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:05.278Z,1492146125.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:05.308Z,1492146125.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:05.681Z,1492146125.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:05.722Z,1492146125.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:06.090Z,1492146126.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:06.120Z,1492146126.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:06.474Z,1492146126.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:06.519Z,1492146126.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:06.873Z,1492146126.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:06.923Z,1492146126.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:07.286Z,1492146127.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:07.342Z,1492146127.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:07.685Z,1492146127.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:07.717Z,1492146127.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:08.085Z,1492146128.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:08.130Z,1492146128.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:08.482Z,1492146128.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:08.524Z,1492146128.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:08.887Z,1492146128.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:08.903Z,1492146128.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:09.289Z,1492146129.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:09.314Z,1492146129.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:09.685Z,1492146129.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:09.737Z,1492146129.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:10.080Z,1492146130.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:10.115Z,1492146130.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:10.490Z,1492146130.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:10.513Z,1492146130.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:10.896Z,1492146130.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:10.913Z,1492146130.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:11.276Z,1492146131.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:11.370Z,1492146131.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:11.674Z,1492146131.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:11.777Z,1492146131.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:12.079Z,1492146132.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:12.128Z,1492146132.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:12.479Z,1492146132.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:12.524Z,1492146132.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:12.881Z,1492146132.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:12.957Z,1492146132.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:13.277Z,1492146133.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:13.317Z,1492146133.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:13.686Z,1492146133.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:13.738Z,1492146133.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:14.085Z,1492146134.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:14.139Z,1492146134.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:14.484Z,1492146134.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:14.515Z,1492146134.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:14.890Z,1492146134.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:14.918Z,1492146134.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:15.294Z,1492146135.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:15.309Z,1492146135.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:15.353Z,1492146135.353 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:02:15.685Z,1492146135.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:15.713Z,1492146135.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:16.073Z,1492146136.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:16.118Z,1492146136.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:16.475Z,1492146136.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:16.521Z,1492146136.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:16.883Z,1492146136.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:16.916Z,1492146136.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:17.277Z,1492146137.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:17.305Z,1492146137.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:17.677Z,1492146137.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:17.706Z,1492146137.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:18.075Z,1492146138.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:18.098Z,1492146138.098 [PNI_TCM](ERROR): CRC does not match. Expected:0x3481 got:0x32618
2017-04-14T05:02:18.129Z,1492146138.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:18.530Z,1492146138.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:18.568Z,1492146138.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:18.882Z,1492146138.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:18.928Z,1492146138.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:19.289Z,1492146139.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:19.305Z,1492146139.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:19.683Z,1492146139.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:19.708Z,1492146139.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:19.716Z,1492146139.716 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:02:19.717Z,1492146139.717 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:02:19.717Z,1492146139.717 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:02:19.717Z,1492146139.717 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:02:20.078Z,1492146140.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:20.114Z,1492146140.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:20.122Z,1492146140.122 [Default:CheckIn:D] Stopped
2017-04-14T05:02:20.122Z,1492146140.122 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:02:20.488Z,1492146140.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:20.511Z,1492146140.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:20.520Z,1492146140.520 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 96.246729 min 
2017-04-14T05:02:20.520Z,1492146140.520 [Default:CheckIn:E] Stopped
2017-04-14T05:02:20.520Z,1492146140.520 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:02:20.520Z,1492146140.520 [Default:CheckIn] Stopped
2017-04-14T05:02:20.521Z,1492146140.520 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:02:20.521Z,1492146140.521 [Default:CheckIn](INFO): Running loop #15
2017-04-14T05:02:20.521Z,1492146140.521 [Default:CheckIn] Running Loop=15
2017-04-14T05:02:20.521Z,1492146140.521 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:02:20.521Z,1492146140.521 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:02:24.001Z,1492146144.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:24.022Z,1492146144.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:24.112Z,1492146144.112 [NAL9602](INFO): Powering up
2017-04-14T05:02:24.132Z,1492146144.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:24.159Z,1492146144.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:24.531Z,1492146144.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:24.590Z,1492146144.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:24.937Z,1492146144.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:24.982Z,1492146144.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:25.328Z,1492146145.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:25.352Z,1492146145.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:25.730Z,1492146145.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:25.779Z,1492146145.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:26.129Z,1492146146.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:26.159Z,1492146146.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:26.530Z,1492146146.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:26.588Z,1492146146.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:26.937Z,1492146146.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:26.993Z,1492146146.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:27.333Z,1492146147.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:27.351Z,1492146147.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:27.733Z,1492146147.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:27.758Z,1492146147.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:28.121Z,1492146148.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:28.162Z,1492146148.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:28.521Z,1492146148.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:28.551Z,1492146148.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:28.939Z,1492146148.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:28.968Z,1492146148.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:29.361Z,1492146149.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:29.376Z,1492146149.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:29.718Z,1492146149.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:29.734Z,1492146149.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:30.121Z,1492146150.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:30.170Z,1492146150.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:30.624Z,1492146150.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:30.682Z,1492146150.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:30.934Z,1492146150.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:30.974Z,1492146150.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:31.326Z,1492146151.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:31.341Z,1492146151.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:31.729Z,1492146151.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:31.744Z,1492146151.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:32.132Z,1492146152.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:32.172Z,1492146152.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:32.527Z,1492146152.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:32.581Z,1492146152.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:32.924Z,1492146152.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:32.939Z,1492146152.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:33.330Z,1492146153.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:33.345Z,1492146153.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:33.727Z,1492146153.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:33.750Z,1492146153.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:34.132Z,1492146154.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:34.148Z,1492146154.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:34.533Z,1492146154.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:34.549Z,1492146154.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:34.941Z,1492146154.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:34.956Z,1492146154.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:35.306Z,1492146155.306 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:02:35.332Z,1492146155.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:35.365Z,1492146155.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:35.725Z,1492146155.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:35.753Z,1492146155.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:36.136Z,1492146156.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:36.163Z,1492146156.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:36.540Z,1492146156.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:36.572Z,1492146156.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:36.935Z,1492146156.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:36.968Z,1492146156.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:37.326Z,1492146157.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:37.342Z,1492146157.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:37.739Z,1492146157.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:37.825Z,1492146157.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:38.132Z,1492146158.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:38.153Z,1492146158.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:38.535Z,1492146158.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:38.582Z,1492146158.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:38.940Z,1492146158.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:38.962Z,1492146158.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:39.339Z,1492146159.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:39.395Z,1492146159.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:39.730Z,1492146159.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:39.746Z,1492146159.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:40.130Z,1492146160.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:40.187Z,1492146160.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:40.532Z,1492146160.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:40.548Z,1492146160.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:40.921Z,1492146160.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:40.960Z,1492146160.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:41.334Z,1492146161.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:41.350Z,1492146161.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:41.721Z,1492146161.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:41.748Z,1492146161.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:42.123Z,1492146162.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:42.158Z,1492146162.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:42.521Z,1492146162.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:42.548Z,1492146162.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:42.937Z,1492146162.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:42.953Z,1492146162.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:43.345Z,1492146163.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:43.366Z,1492146163.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:43.748Z,1492146163.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:43.764Z,1492146163.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:44.132Z,1492146164.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:44.168Z,1492146164.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:44.533Z,1492146164.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:44.566Z,1492146164.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:44.925Z,1492146164.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:44.941Z,1492146164.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:45.333Z,1492146165.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:45.368Z,1492146165.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:45.733Z,1492146165.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:45.771Z,1492146165.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:46.129Z,1492146166.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:46.145Z,1492146166.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:46.533Z,1492146166.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:46.549Z,1492146166.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:46.931Z,1492146166.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:46.947Z,1492146166.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:47.333Z,1492146167.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:47.349Z,1492146167.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:47.746Z,1492146167.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:47.762Z,1492146167.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:48.150Z,1492146168.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:48.166Z,1492146168.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:48.540Z,1492146168.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:48.574Z,1492146168.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:48.961Z,1492146168.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:48.982Z,1492146168.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:49.342Z,1492146169.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:49.414Z,1492146169.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:49.737Z,1492146169.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:49.761Z,1492146169.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:50.147Z,1492146170.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:50.230Z,1492146170.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:50.532Z,1492146170.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:50.577Z,1492146170.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:50.921Z,1492146170.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:50.942Z,1492146170.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:51.322Z,1492146171.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:51.390Z,1492146171.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:51.735Z,1492146171.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:51.780Z,1492146171.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:52.127Z,1492146172.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:52.202Z,1492146172.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:52.530Z,1492146172.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:52.546Z,1492146172.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:52.921Z,1492146172.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:52.985Z,1492146172.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:53.333Z,1492146173.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:53.396Z,1492146173.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:53.741Z,1492146173.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:53.756Z,1492146173.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:54.141Z,1492146174.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:54.157Z,1492146174.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:54.545Z,1492146174.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:54.566Z,1492146174.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:54.945Z,1492146174.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:54.961Z,1492146174.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:55.323Z,1492146175.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:55.359Z,1492146175.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:55.726Z,1492146175.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:55.753Z,1492146175.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:56.122Z,1492146176.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:56.154Z,1492146176.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:56.154Z,1492146176.154 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:02:56.154Z,1492146176.154 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:02:56.161Z,1492146176.161 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:56.161Z,1492146176.161 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:02:56.162Z,1492146176.161 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:02:56.176Z,1492146176.176 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:02:56.176Z,1492146176.176 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:02:56.522Z,1492146176.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:56.578Z,1492146176.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:02:56.578Z,1492146176.578 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:02:56.579Z,1492146176.579 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:02:56.579Z,1492146176.579 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:02:56.930Z,1492146176.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:56.961Z,1492146176.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:02:56.961Z,1492146176.961 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:02:56.962Z,1492146176.962 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:02:56.966Z,1492146176.967 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:02:56.967Z,1492146176.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:02:56.967Z,1492146176.967 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:02:57.334Z,1492146177.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:57.366Z,1492146177.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:57.725Z,1492146177.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:57.741Z,1492146177.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:58.125Z,1492146178.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:58.142Z,1492146178.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:58.530Z,1492146178.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:58.567Z,1492146178.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:58.944Z,1492146178.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:58.970Z,1492146178.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:59.340Z,1492146179.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:59.372Z,1492146179.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:02:59.740Z,1492146179.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:02:59.776Z,1492146179.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:00.144Z,1492146180.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:00.176Z,1492146180.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:00.535Z,1492146180.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:00.554Z,1492146180.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:00.927Z,1492146180.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:00.943Z,1492146180.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:01.334Z,1492146181.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:01.350Z,1492146181.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:01.725Z,1492146181.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:01.754Z,1492146181.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:02.134Z,1492146182.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:02.150Z,1492146182.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:02.537Z,1492146182.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:02.553Z,1492146182.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:02.922Z,1492146182.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:02.950Z,1492146182.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:03.335Z,1492146183.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:03.367Z,1492146183.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:03.725Z,1492146183.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:03.850Z,1492146183.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:04.136Z,1492146184.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:04.225Z,1492146184.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:04.540Z,1492146184.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:04.568Z,1492146184.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:04.944Z,1492146184.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:05.014Z,1492146185.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:05.346Z,1492146185.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:05.374Z,1492146185.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:05.724Z,1492146185.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:05.774Z,1492146185.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:06.130Z,1492146186.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:06.174Z,1492146186.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:06.528Z,1492146186.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:06.546Z,1492146186.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:06.932Z,1492146186.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:06.953Z,1492146186.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:07.330Z,1492146187.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:07.345Z,1492146187.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:07.721Z,1492146187.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:07.756Z,1492146187.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:08.123Z,1492146188.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:08.155Z,1492146188.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:08.521Z,1492146188.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:08.561Z,1492146188.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:08.927Z,1492146188.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:08.958Z,1492146188.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:09.356Z,1492146189.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:09.382Z,1492146189.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:09.739Z,1492146189.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:09.783Z,1492146189.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:10.140Z,1492146190.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:10.158Z,1492146190.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:10.556Z,1492146190.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:10.592Z,1492146190.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:10.921Z,1492146190.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:10.956Z,1492146190.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:11.319Z,1492146191.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:11.347Z,1492146191.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:11.725Z,1492146191.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:11.753Z,1492146191.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:12.121Z,1492146192.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:12.162Z,1492146192.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:12.544Z,1492146192.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:12.564Z,1492146192.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:12.933Z,1492146192.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:12.986Z,1492146192.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:13.340Z,1492146193.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:13.371Z,1492146193.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:13.729Z,1492146193.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:13.777Z,1492146193.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:14.129Z,1492146194.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:14.179Z,1492146194.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:14.535Z,1492146194.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:14.554Z,1492146194.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:14.952Z,1492146194.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:14.970Z,1492146194.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:15.367Z,1492146195.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:15.384Z,1492146195.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:15.740Z,1492146195.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:15.784Z,1492146195.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:16.129Z,1492146196.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:16.170Z,1492146196.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:16.535Z,1492146196.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:16.587Z,1492146196.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:16.939Z,1492146196.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:17.006Z,1492146197.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:17.329Z,1492146197.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:17.345Z,1492146197.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:17.738Z,1492146197.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:17.792Z,1492146197.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:18.139Z,1492146198.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:18.154Z,1492146198.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:18.519Z,1492146198.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:18.581Z,1492146198.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:18.921Z,1492146198.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:18.946Z,1492146198.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:19.321Z,1492146199.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:19.367Z,1492146199.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:19.744Z,1492146199.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:19.762Z,1492146199.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:20.149Z,1492146200.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:20.165Z,1492146200.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:20.540Z,1492146200.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:20.574Z,1492146200.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:24.132Z,1492146204.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:24.164Z,1492146204.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:24.274Z,1492146204.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:24.377Z,1492146204.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:24.623Z,1492146204.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:24.638Z,1492146204.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:25.073Z,1492146205.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:25.088Z,1492146205.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:25.456Z,1492146205.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:25.472Z,1492146205.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:25.869Z,1492146205.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:25.918Z,1492146205.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:26.317Z,1492146206.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:26.364Z,1492146206.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:26.627Z,1492146206.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:26.669Z,1492146206.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:27.027Z,1492146207.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:27.058Z,1492146207.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:27.418Z,1492146207.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:27.454Z,1492146207.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:27.846Z,1492146207.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:27.871Z,1492146207.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:28.225Z,1492146208.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:28.253Z,1492146208.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:28.638Z,1492146208.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:28.664Z,1492146208.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:29.033Z,1492146209.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:29.065Z,1492146209.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:29.429Z,1492146209.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:29.469Z,1492146209.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:29.825Z,1492146209.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:29.898Z,1492146209.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:30.240Z,1492146210.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:30.269Z,1492146210.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:30.688Z,1492146210.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:30.747Z,1492146210.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:31.036Z,1492146211.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:31.052Z,1492146211.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:31.439Z,1492146211.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:31.493Z,1492146211.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:31.831Z,1492146211.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:31.889Z,1492146211.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:32.230Z,1492146212.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:32.254Z,1492146212.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:32.691Z,1492146212.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:32.738Z,1492146212.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:33.019Z,1492146213.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:33.056Z,1492146213.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:33.421Z,1492146213.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:33.454Z,1492146213.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:33.825Z,1492146213.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:33.852Z,1492146213.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:34.219Z,1492146214.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:34.312Z,1492146214.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:34.629Z,1492146214.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:34.650Z,1492146214.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:35.030Z,1492146215.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:35.045Z,1492146215.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:35.436Z,1492146215.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:35.458Z,1492146215.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:35.835Z,1492146215.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:35.851Z,1492146215.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:36.259Z,1492146216.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:36.337Z,1492146216.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:36.643Z,1492146216.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:36.696Z,1492146216.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:37.065Z,1492146217.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:37.101Z,1492146217.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:37.417Z,1492146217.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:37.459Z,1492146217.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:37.876Z,1492146217.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:37.905Z,1492146217.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:38.229Z,1492146218.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:38.361Z,1492146218.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:38.640Z,1492146218.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:38.668Z,1492146218.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:39.017Z,1492146219.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:39.079Z,1492146219.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:39.453Z,1492146219.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:39.474Z,1492146219.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:39.827Z,1492146219.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:39.854Z,1492146219.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:40.250Z,1492146220.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:40.350Z,1492146220.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:40.640Z,1492146220.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:40.688Z,1492146220.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:41.050Z,1492146221.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:41.094Z,1492146221.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:41.454Z,1492146221.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:41.489Z,1492146221.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:41.848Z,1492146221.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:41.870Z,1492146221.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:42.242Z,1492146222.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:42.259Z,1492146222.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:42.621Z,1492146222.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:42.701Z,1492146222.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:43.039Z,1492146223.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:43.055Z,1492146223.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:43.419Z,1492146223.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:43.461Z,1492146223.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:43.844Z,1492146223.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:43.859Z,1492146223.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:44.221Z,1492146224.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:44.274Z,1492146224.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:44.697Z,1492146224.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:44.762Z,1492146224.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:45.034Z,1492146225.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:45.070Z,1492146225.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:45.420Z,1492146225.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:45.437Z,1492146225.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:45.834Z,1492146225.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:45.888Z,1492146225.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:46.240Z,1492146226.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:46.286Z,1492146226.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:46.661Z,1492146226.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:46.711Z,1492146226.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:47.036Z,1492146227.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:47.054Z,1492146227.054 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:03:47.054Z,1492146227.055 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:03:47.055Z,1492146227.055 [BPC1](ERROR): Communications Fault
2017-04-14T05:03:47.070Z,1492146227.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:47.090Z,1492146227.090 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:03:47.425Z,1492146227.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:47.469Z,1492146227.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:47.825Z,1492146227.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:47.867Z,1492146227.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:48.243Z,1492146228.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:48.344Z,1492146228.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:48.396Z,1492146228.396 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:03:48.396Z,1492146228.396 [BPC1] No Fault, FailCount= 1
2017-04-14T05:03:48.628Z,1492146228.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:48.717Z,1492146228.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:49.031Z,1492146229.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:49.080Z,1492146229.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:49.438Z,1492146229.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:49.454Z,1492146229.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:49.833Z,1492146229.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:49.870Z,1492146229.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:50.315Z,1492146230.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:50.408Z,1492146230.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:50.634Z,1492146230.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:50.658Z,1492146230.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:51.073Z,1492146231.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:51.136Z,1492146231.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:51.462Z,1492146231.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:51.543Z,1492146231.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:51.897Z,1492146231.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:51.954Z,1492146231.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:52.261Z,1492146232.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:52.366Z,1492146232.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:52.634Z,1492146232.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:52.659Z,1492146232.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:53.038Z,1492146233.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:53.054Z,1492146233.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:53.432Z,1492146233.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:53.448Z,1492146233.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:53.854Z,1492146233.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:53.870Z,1492146233.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:54.335Z,1492146234.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:54.375Z,1492146234.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:54.625Z,1492146234.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:54.669Z,1492146234.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:55.030Z,1492146235.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:55.064Z,1492146235.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:55.428Z,1492146235.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:55.445Z,1492146235.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:55.834Z,1492146235.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:55.850Z,1492146235.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:56.236Z,1492146236.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:56.297Z,1492146236.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:56.644Z,1492146236.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:56.665Z,1492146236.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:57.054Z,1492146237.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:57.074Z,1492146237.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:57.438Z,1492146237.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:57.454Z,1492146237.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:57.862Z,1492146237.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:57.889Z,1492146237.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:58.218Z,1492146238.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:58.255Z,1492146238.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:58.668Z,1492146238.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:58.695Z,1492146238.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:59.030Z,1492146239.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:59.062Z,1492146239.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:59.446Z,1492146239.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:59.488Z,1492146239.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:03:59.842Z,1492146239.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:03:59.891Z,1492146239.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:00.254Z,1492146240.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:00.271Z,1492146240.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:00.655Z,1492146240.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:00.725Z,1492146240.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:01.050Z,1492146241.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:01.086Z,1492146241.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:01.456Z,1492146241.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:01.486Z,1492146241.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:01.844Z,1492146241.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:01.860Z,1492146241.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:02.271Z,1492146242.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:02.399Z,1492146242.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:02.699Z,1492146242.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:02.748Z,1492146242.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:03.019Z,1492146243.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:03.063Z,1492146243.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:03.437Z,1492146243.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:03.469Z,1492146243.469 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:04:03.470Z,1492146243.470 [BPC1] Data Fault, FailCount= 2
2017-04-14T05:04:03.470Z,1492146243.470 [BPC1](ERROR): Data Fault
2017-04-14T05:04:03.483Z,1492146243.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:03.557Z,1492146243.557 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:04:03.841Z,1492146243.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:03.873Z,1492146243.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:04.278Z,1492146244.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:04.319Z,1492146244.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:04.613Z,1492146244.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:04.665Z,1492146244.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:04.706Z,1492146244.706 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:04:04.706Z,1492146244.706 [BPC1] No Fault, FailCount= 2
2017-04-14T05:04:05.044Z,1492146245.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:05.141Z,1492146245.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:05.435Z,1492146245.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:05.458Z,1492146245.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:05.835Z,1492146245.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:05.897Z,1492146245.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:06.286Z,1492146246.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:06.347Z,1492146246.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:06.636Z,1492146246.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:06.672Z,1492146246.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:07.040Z,1492146247.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:07.071Z,1492146247.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:07.440Z,1492146247.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:07.470Z,1492146247.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:07.832Z,1492146247.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:07.882Z,1492146247.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:08.279Z,1492146248.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:08.347Z,1492146248.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:08.621Z,1492146248.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:08.655Z,1492146248.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:09.030Z,1492146249.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:09.058Z,1492146249.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:09.419Z,1492146249.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:09.448Z,1492146249.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:09.832Z,1492146249.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:09.862Z,1492146249.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:10.229Z,1492146250.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:10.341Z,1492146250.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:10.650Z,1492146250.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:10.700Z,1492146250.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:11.054Z,1492146251.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:11.074Z,1492146251.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:11.419Z,1492146251.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:11.434Z,1492146251.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:11.836Z,1492146251.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:11.870Z,1492146251.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:12.240Z,1492146252.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:12.267Z,1492146252.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:12.679Z,1492146252.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:12.725Z,1492146252.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:13.045Z,1492146253.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:13.078Z,1492146253.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:13.425Z,1492146253.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:13.446Z,1492146253.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:13.822Z,1492146253.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:13.866Z,1492146253.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:14.243Z,1492146254.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:14.271Z,1492146254.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:14.648Z,1492146254.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:14.717Z,1492146254.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:15.020Z,1492146255.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:15.060Z,1492146255.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:15.422Z,1492146255.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:15.461Z,1492146255.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:15.844Z,1492146255.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:15.860Z,1492146255.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:16.329Z,1492146256.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:16.388Z,1492146256.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:16.635Z,1492146256.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:16.693Z,1492146256.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:17.035Z,1492146257.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:17.052Z,1492146257.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:17.440Z,1492146257.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:17.462Z,1492146257.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:17.840Z,1492146257.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:17.926Z,1492146257.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:18.304Z,1492146258.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:18.344Z,1492146258.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:18.662Z,1492146258.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:18.718Z,1492146258.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:19.029Z,1492146259.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:19.073Z,1492146259.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:19.425Z,1492146259.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:19.521Z,1492146259.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:19.828Z,1492146259.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:19.888Z,1492146259.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:20.296Z,1492146260.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:20.353Z,1492146260.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:20.651Z,1492146260.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:20.704Z,1492146260.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:25.393Z,1492146265.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:25.412Z,1492146265.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:25.549Z,1492146265.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:25.565Z,1492146265.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:25.952Z,1492146265.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:25.969Z,1492146265.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:26.316Z,1492146266.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:26.333Z,1492146266.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:26.689Z,1492146266.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:26.717Z,1492146266.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:27.115Z,1492146267.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:27.131Z,1492146267.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:27.507Z,1492146267.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:27.565Z,1492146267.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:27.894Z,1492146267.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:27.924Z,1492146267.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:28.291Z,1492146268.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:28.323Z,1492146268.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:28.716Z,1492146268.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:28.734Z,1492146268.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:29.097Z,1492146269.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:29.130Z,1492146269.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:29.497Z,1492146269.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:29.525Z,1492146269.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:29.925Z,1492146269.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:29.946Z,1492146269.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:30.333Z,1492146270.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:30.356Z,1492146270.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:30.719Z,1492146270.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:30.735Z,1492146270.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:31.108Z,1492146271.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:31.142Z,1492146271.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:31.500Z,1492146271.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:31.557Z,1492146271.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:31.906Z,1492146271.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:31.965Z,1492146271.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:32.296Z,1492146272.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:32.316Z,1492146272.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:32.705Z,1492146272.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:32.722Z,1492146272.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:33.101Z,1492146273.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:33.162Z,1492146273.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:33.506Z,1492146273.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:33.521Z,1492146273.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:33.900Z,1492146273.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:33.957Z,1492146273.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:34.292Z,1492146274.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:34.324Z,1492146274.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:34.706Z,1492146274.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:34.762Z,1492146274.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:35.101Z,1492146275.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:35.117Z,1492146275.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:35.504Z,1492146275.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:35.528Z,1492146275.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:35.904Z,1492146275.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:35.937Z,1492146275.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:36.312Z,1492146276.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:36.342Z,1492146276.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:36.708Z,1492146276.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:36.742Z,1492146276.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:37.095Z,1492146277.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:37.110Z,1492146277.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:37.495Z,1492146277.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:37.510Z,1492146277.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:37.900Z,1492146277.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:37.942Z,1492146277.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:38.340Z,1492146278.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:38.393Z,1492146278.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:38.710Z,1492146278.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:38.743Z,1492146278.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:39.114Z,1492146279.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:39.134Z,1492146279.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:39.490Z,1492146279.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:39.538Z,1492146279.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:39.924Z,1492146279.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:39.940Z,1492146279.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:40.298Z,1492146280.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:40.334Z,1492146280.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:40.735Z,1492146280.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:40.760Z,1492146280.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:41.127Z,1492146281.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:41.203Z,1492146281.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:41.519Z,1492146281.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:41.568Z,1492146281.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:41.917Z,1492146281.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:41.943Z,1492146281.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:42.301Z,1492146282.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:42.342Z,1492146282.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:42.705Z,1492146282.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:42.740Z,1492146282.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:43.166Z,1492146283.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:43.223Z,1492146283.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:43.498Z,1492146283.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:43.518Z,1492146283.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:43.899Z,1492146283.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:43.932Z,1492146283.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:44.292Z,1492146284.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:44.343Z,1492146284.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:44.717Z,1492146284.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:44.749Z,1492146284.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:45.094Z,1492146285.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:45.110Z,1492146285.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:45.501Z,1492146285.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:45.529Z,1492146285.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:45.904Z,1492146285.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:45.936Z,1492146285.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:46.351Z,1492146286.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:46.367Z,1492146286.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:46.708Z,1492146286.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:46.804Z,1492146286.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:47.105Z,1492146287.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:47.137Z,1492146287.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:47.495Z,1492146287.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:47.560Z,1492146287.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:47.890Z,1492146287.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:47.919Z,1492146287.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:48.289Z,1492146288.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:48.342Z,1492146288.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:48.701Z,1492146288.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:48.774Z,1492146288.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:49.096Z,1492146289.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:49.127Z,1492146289.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:49.493Z,1492146289.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:49.534Z,1492146289.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:49.901Z,1492146289.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:49.937Z,1492146289.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:49.944Z,1492146289.944 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:49.944Z,1492146289.944 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T05:04:49.944Z,1492146289.944 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:04:49.958Z,1492146289.958 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:04:50.295Z,1492146290.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:50.369Z,1492146290.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:50.465Z,1492146290.465 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:04:50.465Z,1492146290.465 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T05:04:50.690Z,1492146290.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:50.742Z,1492146290.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:50.764Z,1492146290.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:04:50.765Z,1492146290.765 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:04:50.765Z,1492146290.765 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:04:51.111Z,1492146291.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:51.127Z,1492146291.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:51.509Z,1492146291.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:51.530Z,1492146291.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:51.914Z,1492146291.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:51.930Z,1492146291.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:52.308Z,1492146292.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:52.324Z,1492146292.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:52.689Z,1492146292.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:52.726Z,1492146292.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:53.087Z,1492146293.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:53.103Z,1492146293.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:53.497Z,1492146293.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:53.533Z,1492146293.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:53.906Z,1492146293.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:53.983Z,1492146293.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:54.293Z,1492146294.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:54.309Z,1492146294.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:54.696Z,1492146294.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:54.712Z,1492146294.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:55.145Z,1492146295.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:55.160Z,1492146295.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:55.507Z,1492146295.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:55.547Z,1492146295.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:55.724Z,1492146295.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:55.901Z,1492146295.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:55.947Z,1492146295.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:56.306Z,1492146296.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:56.343Z,1492146296.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:56.521Z,1492146296.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:56.703Z,1492146296.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:56.746Z,1492146296.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:56.940Z,1492146296.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:57.106Z,1492146297.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:57.122Z,1492146297.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:57.504Z,1492146297.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:57.520Z,1492146297.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:57.738Z,1492146297.738 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:57.908Z,1492146297.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:57.924Z,1492146297.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:58.324Z,1492146298.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:58.388Z,1492146298.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:58.532Z,1492146298.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:58.695Z,1492146298.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:58.723Z,1492146298.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:58.936Z,1492146298.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:59.115Z,1492146299.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:59.176Z,1492146299.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:59.491Z,1492146299.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:59.507Z,1492146299.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:59.900Z,1492146299.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:04:59.908Z,1492146299.908 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T05:04:59.908Z,1492146299.908 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:04:59.908Z,1492146299.908 [BPC1](ERROR): Data Fault
2017-04-14T05:04:59.921Z,1492146299.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:04:59.973Z,1492146299.973 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:05:00.290Z,1492146300.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:00.323Z,1492146300.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:00.704Z,1492146300.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:00.761Z,1492146300.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:01.094Z,1492146301.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:01.126Z,1492146301.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:01.193Z,1492146301.193 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:05:01.193Z,1492146301.193 [BPC1] No Fault, FailCount= 1
2017-04-14T05:05:01.497Z,1492146301.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:01.623Z,1492146301.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:01.937Z,1492146301.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:02.038Z,1492146302.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:02.318Z,1492146302.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:02.382Z,1492146302.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:02.710Z,1492146302.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:02.737Z,1492146302.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:03.095Z,1492146303.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:03.118Z,1492146303.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:03.497Z,1492146303.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:03.513Z,1492146303.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:03.893Z,1492146303.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:03.945Z,1492146303.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:04.305Z,1492146304.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:04.345Z,1492146304.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:04.703Z,1492146304.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:04.786Z,1492146304.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:05.095Z,1492146305.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:05.136Z,1492146305.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:05.489Z,1492146305.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:05.539Z,1492146305.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:05.922Z,1492146305.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:05.954Z,1492146305.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:06.298Z,1492146306.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:06.314Z,1492146306.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:06.716Z,1492146306.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:06.749Z,1492146306.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:07.143Z,1492146307.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:07.160Z,1492146307.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:07.504Z,1492146307.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:07.544Z,1492146307.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:07.907Z,1492146307.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:07.930Z,1492146307.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:08.299Z,1492146308.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:08.314Z,1492146308.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:08.692Z,1492146308.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:08.722Z,1492146308.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:09.102Z,1492146309.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:09.126Z,1492146309.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:09.507Z,1492146309.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:09.530Z,1492146309.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:09.890Z,1492146309.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:09.917Z,1492146309.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:10.309Z,1492146310.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:10.325Z,1492146310.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:10.689Z,1492146310.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:10.766Z,1492146310.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:11.093Z,1492146311.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:11.121Z,1492146311.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:11.493Z,1492146311.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:11.529Z,1492146311.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:11.920Z,1492146311.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:11.944Z,1492146311.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:12.332Z,1492146312.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:12.364Z,1492146312.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:12.754Z,1492146312.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:12.777Z,1492146312.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:13.122Z,1492146313.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:13.146Z,1492146313.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:13.515Z,1492146313.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:13.556Z,1492146313.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:13.898Z,1492146313.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:13.967Z,1492146313.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:14.311Z,1492146314.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:14.387Z,1492146314.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:14.743Z,1492146314.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:14.759Z,1492146314.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:15.094Z,1492146315.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:15.128Z,1492146315.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:15.511Z,1492146315.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:15.558Z,1492146315.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:15.913Z,1492146315.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:15.936Z,1492146315.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:16.318Z,1492146316.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:16.367Z,1492146316.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:16.694Z,1492146316.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:16.761Z,1492146316.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:17.111Z,1492146317.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:17.130Z,1492146317.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:17.512Z,1492146317.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:17.528Z,1492146317.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:17.910Z,1492146317.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:17.931Z,1492146317.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:18.312Z,1492146318.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:18.328Z,1492146318.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:18.711Z,1492146318.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:18.743Z,1492146318.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:19.090Z,1492146319.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:19.124Z,1492146319.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:19.487Z,1492146319.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:19.502Z,1492146319.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:19.891Z,1492146319.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:19.907Z,1492146319.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:20.301Z,1492146320.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:20.337Z,1492146320.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:20.701Z,1492146320.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:20.736Z,1492146320.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:24.207Z,1492146324.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:24.235Z,1492146324.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:24.386Z,1492146324.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:24.490Z,1492146324.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:24.756Z,1492146324.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:24.772Z,1492146324.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:25.168Z,1492146325.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:25.200Z,1492146325.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:25.554Z,1492146325.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:25.574Z,1492146325.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:25.953Z,1492146325.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:25.974Z,1492146325.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:26.342Z,1492146326.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:26.370Z,1492146326.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:26.754Z,1492146326.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:26.770Z,1492146326.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:27.141Z,1492146327.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:27.168Z,1492146327.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:27.556Z,1492146327.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:27.572Z,1492146327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:27.960Z,1492146327.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:27.982Z,1492146327.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:28.341Z,1492146328.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:28.374Z,1492146328.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:28.742Z,1492146328.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:28.806Z,1492146328.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:29.148Z,1492146329.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:29.210Z,1492146329.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:29.565Z,1492146329.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:29.580Z,1492146329.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:29.974Z,1492146329.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:29.994Z,1492146329.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:30.352Z,1492146330.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:30.406Z,1492146330.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:30.743Z,1492146330.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:30.758Z,1492146330.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:31.150Z,1492146331.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:31.210Z,1492146331.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:31.549Z,1492146331.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:31.586Z,1492146331.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:31.946Z,1492146331.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:31.990Z,1492146331.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:32.341Z,1492146332.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:32.369Z,1492146332.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:32.741Z,1492146332.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:32.774Z,1492146332.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:33.145Z,1492146333.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:33.177Z,1492146333.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:33.545Z,1492146333.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:33.580Z,1492146333.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:33.941Z,1492146333.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:33.978Z,1492146333.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:34.365Z,1492146334.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:34.386Z,1492146334.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:34.766Z,1492146334.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:34.781Z,1492146334.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:35.164Z,1492146335.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:35.185Z,1492146335.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:35.571Z,1492146335.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:35.645Z,1492146335.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:35.957Z,1492146335.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:35.997Z,1492146335.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:36.341Z,1492146336.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:36.378Z,1492146336.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:36.761Z,1492146336.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:36.790Z,1492146336.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:37.164Z,1492146337.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:37.202Z,1492146337.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:37.560Z,1492146337.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:37.604Z,1492146337.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:38.004Z,1492146338.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:38.072Z,1492146338.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:38.432Z,1492146338.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:38.599Z,1492146338.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:38.792Z,1492146338.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:38.837Z,1492146338.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:39.216Z,1492146339.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:39.240Z,1492146339.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:39.594Z,1492146339.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:39.634Z,1492146339.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:39.997Z,1492146339.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:40.026Z,1492146340.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:40.397Z,1492146340.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:40.418Z,1492146340.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:40.793Z,1492146340.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:40.814Z,1492146340.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:41.182Z,1492146341.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:41.204Z,1492146341.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:41.573Z,1492146341.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:41.601Z,1492146341.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:41.975Z,1492146341.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:42.012Z,1492146342.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:42.385Z,1492146342.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:42.413Z,1492146342.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:42.784Z,1492146342.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:42.833Z,1492146342.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:43.181Z,1492146343.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:43.215Z,1492146343.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:43.578Z,1492146343.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:43.612Z,1492146343.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:43.977Z,1492146343.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:44.107Z,1492146344.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:44.385Z,1492146344.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:44.401Z,1492146344.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:44.796Z,1492146344.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:44.866Z,1492146344.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:45.200Z,1492146345.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:45.225Z,1492146345.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:45.588Z,1492146345.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:45.630Z,1492146345.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:45.985Z,1492146345.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:46.101Z,1492146346.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:46.373Z,1492146346.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:46.404Z,1492146346.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:46.773Z,1492146346.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:46.809Z,1492146346.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:47.173Z,1492146347.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:47.201Z,1492146347.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:47.573Z,1492146347.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:47.615Z,1492146347.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:47.972Z,1492146347.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:48.011Z,1492146348.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:48.373Z,1492146348.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:48.407Z,1492146348.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:48.773Z,1492146348.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:48.807Z,1492146348.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:49.176Z,1492146349.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:49.203Z,1492146349.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:49.588Z,1492146349.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:49.622Z,1492146349.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:49.992Z,1492146349.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:50.026Z,1492146350.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:50.439Z,1492146350.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:50.471Z,1492146350.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:50.777Z,1492146350.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:50.800Z,1492146350.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:51.183Z,1492146351.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:51.206Z,1492146351.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:51.585Z,1492146351.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:51.638Z,1492146351.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:51.981Z,1492146351.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:52.002Z,1492146352.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:52.432Z,1492146352.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:52.516Z,1492146352.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:52.783Z,1492146352.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:52.835Z,1492146352.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:53.204Z,1492146353.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:53.220Z,1492146353.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:53.612Z,1492146353.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:53.673Z,1492146353.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:53.992Z,1492146353.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:54.065Z,1492146354.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:54.400Z,1492146354.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:54.433Z,1492146354.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:54.775Z,1492146354.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:54.798Z,1492146354.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:55.194Z,1492146355.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:55.229Z,1492146355.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:55.581Z,1492146355.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:55.602Z,1492146355.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:55.989Z,1492146355.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:56.010Z,1492146356.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:56.383Z,1492146356.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:56.412Z,1492146356.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:56.777Z,1492146356.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:56.801Z,1492146356.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:57.190Z,1492146357.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:57.210Z,1492146357.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:57.210Z,1492146357.210 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-04-14T05:05:57.210Z,1492146357.210 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:05:57.237Z,1492146357.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:57.237Z,1492146357.237 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-04-14T05:05:57.237Z,1492146357.237 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:05:57.278Z,1492146357.277 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:05:57.278Z,1492146357.278 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:05:57.591Z,1492146357.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:57.649Z,1492146357.649 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:05:57.650Z,1492146357.649 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-04-14T05:05:57.650Z,1492146357.650 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:05:57.650Z,1492146357.650 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-04-14T05:05:57.995Z,1492146357.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:58.129Z,1492146358.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:05:58.130Z,1492146358.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:05:58.130Z,1492146358.130 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:05:58.154Z,1492146358.154 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:05:58.154Z,1492146358.154 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:05:58.155Z,1492146358.155 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:05:58.373Z,1492146358.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:58.391Z,1492146358.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:58.778Z,1492146358.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:58.794Z,1492146358.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:59.173Z,1492146359.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:59.232Z,1492146359.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:59.592Z,1492146359.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:05:59.610Z,1492146359.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:05:59.970Z,1492146359.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:00.095Z,1492146360.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:00.391Z,1492146360.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:00.444Z,1492146360.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:00.786Z,1492146360.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:00.807Z,1492146360.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:01.190Z,1492146361.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:01.219Z,1492146361.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:01.573Z,1492146361.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:01.631Z,1492146361.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:01.984Z,1492146361.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:02.012Z,1492146362.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:02.393Z,1492146362.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:02.426Z,1492146362.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:02.799Z,1492146362.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:02.882Z,1492146362.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:03.184Z,1492146363.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:03.219Z,1492146363.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:03.572Z,1492146363.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:03.599Z,1492146363.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:03.974Z,1492146363.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:04.004Z,1492146364.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:04.453Z,1492146364.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:04.490Z,1492146364.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:04.782Z,1492146364.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:04.830Z,1492146364.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:05.188Z,1492146365.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:05.212Z,1492146365.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:05.620Z,1492146365.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:05.706Z,1492146365.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:05.975Z,1492146365.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:06.045Z,1492146366.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:06.477Z,1492146366.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:06.567Z,1492146366.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:06.781Z,1492146366.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:06.831Z,1492146366.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:07.183Z,1492146367.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:07.199Z,1492146367.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:07.588Z,1492146367.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:07.616Z,1492146367.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:07.990Z,1492146367.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:08.080Z,1492146368.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:08.385Z,1492146368.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:08.413Z,1492146368.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:08.789Z,1492146368.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:08.822Z,1492146368.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:09.173Z,1492146369.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:09.190Z,1492146369.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:09.581Z,1492146369.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:09.597Z,1492146369.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:09.983Z,1492146369.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:09.999Z,1492146369.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:10.374Z,1492146370.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:10.412Z,1492146370.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:10.804Z,1492146370.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:10.870Z,1492146370.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:11.234Z,1492146371.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:11.313Z,1492146371.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:11.615Z,1492146371.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:11.652Z,1492146371.652 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:06:11.652Z,1492146371.652 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:06:11.652Z,1492146371.652 [BPC1](ERROR): Data Fault
2017-04-14T05:06:11.712Z,1492146371.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:11.805Z,1492146371.805 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:06:11.987Z,1492146371.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:12.070Z,1492146372.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:12.375Z,1492146372.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:12.420Z,1492146372.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:12.773Z,1492146372.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:12.794Z,1492146372.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:12.842Z,1492146372.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:06:12.842Z,1492146372.842 [BPC1] No Fault, FailCount= 1
2017-04-14T05:06:13.181Z,1492146373.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:13.256Z,1492146373.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:13.579Z,1492146373.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:13.626Z,1492146373.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:14.030Z,1492146374.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:14.087Z,1492146374.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:14.377Z,1492146374.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:14.407Z,1492146374.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:14.774Z,1492146374.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:14.809Z,1492146374.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:15.198Z,1492146375.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:15.222Z,1492146375.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:15.585Z,1492146375.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:15.620Z,1492146375.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:15.969Z,1492146375.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:15.986Z,1492146375.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:16.379Z,1492146376.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:16.405Z,1492146376.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:16.781Z,1492146376.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:16.810Z,1492146376.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:17.171Z,1492146377.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:17.212Z,1492146377.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:17.612Z,1492146377.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:17.628Z,1492146377.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:17.979Z,1492146377.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:18.017Z,1492146378.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:18.420Z,1492146378.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:18.468Z,1492146378.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:18.782Z,1492146378.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:18.807Z,1492146378.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:19.185Z,1492146379.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:19.244Z,1492146379.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:19.590Z,1492146379.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:19.616Z,1492146379.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:19.974Z,1492146379.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:20.007Z,1492146380.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:20.430Z,1492146380.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:20.498Z,1492146380.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:20.781Z,1492146380.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:20.802Z,1492146380.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:27.694Z,1492146387.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:27.879Z,1492146387.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:28.306Z,1492146388.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:28.350Z,1492146388.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:28.626Z,1492146388.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:28.739Z,1492146388.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:29.037Z,1492146389.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:29.131Z,1492146389.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:29.456Z,1492146389.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:29.541Z,1492146389.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:29.800Z,1492146389.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:29.910Z,1492146389.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:30.253Z,1492146390.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:30.331Z,1492146390.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:30.602Z,1492146390.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:30.650Z,1492146390.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:31.016Z,1492146391.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:31.049Z,1492146391.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:31.423Z,1492146391.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:31.478Z,1492146391.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:31.815Z,1492146391.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:31.858Z,1492146391.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:32.199Z,1492146392.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:32.266Z,1492146392.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:32.620Z,1492146392.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:32.681Z,1492146392.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:33.009Z,1492146393.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:33.037Z,1492146393.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:33.397Z,1492146393.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:33.438Z,1492146393.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:33.811Z,1492146393.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:33.840Z,1492146393.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:34.195Z,1492146394.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:34.212Z,1492146394.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:34.608Z,1492146394.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:34.625Z,1492146394.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:35.006Z,1492146395.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:35.022Z,1492146395.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:35.404Z,1492146395.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:35.421Z,1492146395.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:35.810Z,1492146395.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:35.830Z,1492146395.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:36.208Z,1492146396.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:36.223Z,1492146396.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:36.613Z,1492146396.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:36.635Z,1492146396.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:37.004Z,1492146397.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:37.058Z,1492146397.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:37.401Z,1492146397.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:37.441Z,1492146397.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:37.782Z,1492146397.782 [NAL9602](INFO): SBD MO Status=2, MOMSN=2108, MT Status=2, MTMSN=0
2017-04-14T05:06:37.782Z,1492146397.782 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T05:06:37.799Z,1492146397.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:37.815Z,1492146397.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:38.208Z,1492146398.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:38.240Z,1492146398.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:38.607Z,1492146398.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:38.622Z,1492146398.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:39.005Z,1492146399.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:39.046Z,1492146399.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:39.407Z,1492146399.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:39.442Z,1492146399.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:39.803Z,1492146399.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:39.820Z,1492146399.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:40.207Z,1492146400.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:40.230Z,1492146400.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:40.607Z,1492146400.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:40.630Z,1492146400.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:41.007Z,1492146401.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:41.024Z,1492146401.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:41.406Z,1492146401.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:41.430Z,1492146401.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:41.804Z,1492146401.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:41.826Z,1492146401.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:42.216Z,1492146402.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:42.272Z,1492146402.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:42.597Z,1492146402.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:42.654Z,1492146402.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:42.998Z,1492146402.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:43.035Z,1492146403.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:43.419Z,1492146403.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:43.458Z,1492146403.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:43.798Z,1492146403.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:43.831Z,1492146403.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:44.237Z,1492146404.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:44.302Z,1492146404.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:44.598Z,1492146404.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:44.658Z,1492146404.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:45.033Z,1492146405.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:45.051Z,1492146405.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:45.273Z,1492146405.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:45.406Z,1492146405.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:45.436Z,1492146405.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:45.811Z,1492146405.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:45.838Z,1492146405.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:46.073Z,1492146406.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:46.212Z,1492146406.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:46.235Z,1492146406.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:46.600Z,1492146406.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:46.636Z,1492146406.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:47.058Z,1492146407.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:47.151Z,1492146407.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:47.392Z,1492146407.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:47.421Z,1492146407.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:47.810Z,1492146407.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:47.839Z,1492146407.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:48.199Z,1492146408.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:48.247Z,1492146408.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:48.602Z,1492146408.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:48.642Z,1492146408.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:49.006Z,1492146409.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:49.026Z,1492146409.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:49.413Z,1492146409.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:49.428Z,1492146409.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:49.795Z,1492146409.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:49.822Z,1492146409.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:50.244Z,1492146410.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:50.290Z,1492146410.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:50.601Z,1492146410.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:50.638Z,1492146410.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:51.007Z,1492146411.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:51.046Z,1492146411.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:51.409Z,1492146411.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:51.440Z,1492146411.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:51.826Z,1492146411.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:51.850Z,1492146411.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:52.234Z,1492146412.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:52.252Z,1492146412.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:52.606Z,1492146412.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:52.623Z,1492146412.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:53.010Z,1492146413.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:53.028Z,1492146413.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:53.411Z,1492146413.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:53.427Z,1492146413.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:53.816Z,1492146413.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:53.838Z,1492146413.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:54.197Z,1492146414.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:54.224Z,1492146414.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:54.597Z,1492146414.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:54.626Z,1492146414.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:54.986Z,1492146414.986 [NAL9602](INFO): SBD MO Status=2, MOMSN=2108, MT Status=2, MTMSN=0
2017-04-14T05:06:54.986Z,1492146414.986 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T05:06:55.003Z,1492146415.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:55.046Z,1492146415.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:55.407Z,1492146415.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:55.442Z,1492146415.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:55.797Z,1492146415.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:55.837Z,1492146415.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:56.201Z,1492146416.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:56.238Z,1492146416.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:56.599Z,1492146416.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:56.685Z,1492146416.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:56.998Z,1492146416.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:57.018Z,1492146417.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:57.409Z,1492146417.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:57.462Z,1492146417.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:57.805Z,1492146417.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:57.821Z,1492146417.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:58.201Z,1492146418.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:58.266Z,1492146418.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:58.606Z,1492146418.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:58.640Z,1492146418.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:59.006Z,1492146419.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:59.065Z,1492146419.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:59.416Z,1492146419.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:59.456Z,1492146419.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:06:59.812Z,1492146419.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:06:59.828Z,1492146419.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:00.206Z,1492146420.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:00.221Z,1492146420.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:00.613Z,1492146420.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:00.648Z,1492146420.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:01.004Z,1492146421.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:01.020Z,1492146421.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:01.406Z,1492146421.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:01.422Z,1492146421.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:01.799Z,1492146421.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:01.826Z,1492146421.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:02.206Z,1492146422.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:02.222Z,1492146422.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:02.623Z,1492146422.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:02.678Z,1492146422.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:02.000Z,1492146423.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:03.044Z,1492146423.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:03.434Z,1492146423.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:03.460Z,1492146423.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:03.805Z,1492146423.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:03.849Z,1492146423.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:04.212Z,1492146424.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:04.232Z,1492146424.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:04.597Z,1492146424.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:04.636Z,1492146424.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:04.998Z,1492146424.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:05.046Z,1492146425.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:05.405Z,1492146425.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:05.433Z,1492146425.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:05.799Z,1492146425.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:05.827Z,1492146425.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:06.209Z,1492146426.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:06.240Z,1492146426.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:06.606Z,1492146426.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:06.641Z,1492146426.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:07.015Z,1492146427.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:07.048Z,1492146427.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:07.398Z,1492146427.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:07.435Z,1492146427.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:07.830Z,1492146427.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:07.850Z,1492146427.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:08.204Z,1492146428.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:08.252Z,1492146428.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:08.614Z,1492146428.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:08.660Z,1492146428.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:09.012Z,1492146429.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:09.030Z,1492146429.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:09.414Z,1492146429.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:09.450Z,1492146429.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:09.829Z,1492146429.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:09.847Z,1492146429.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:10.201Z,1492146430.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:10.230Z,1492146430.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:10.604Z,1492146430.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:10.674Z,1492146430.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:11.002Z,1492146431.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:11.051Z,1492146431.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:11.400Z,1492146431.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:11.446Z,1492146431.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:11.799Z,1492146431.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:11.846Z,1492146431.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:12.199Z,1492146432.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:12.240Z,1492146432.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:12.607Z,1492146432.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:12.663Z,1492146432.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:13.005Z,1492146433.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:13.058Z,1492146433.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:13.407Z,1492146433.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:13.454Z,1492146433.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:13.806Z,1492146433.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:13.864Z,1492146433.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:14.197Z,1492146434.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:14.230Z,1492146434.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:14.597Z,1492146434.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:14.635Z,1492146434.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:15.003Z,1492146435.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:15.019Z,1492146435.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:15.401Z,1492146435.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:15.428Z,1492146435.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:15.807Z,1492146435.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:15.822Z,1492146435.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:16.200Z,1492146436.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:16.228Z,1492146436.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:16.582Z,1492146436.582 [NAL9602](INFO): SBD MO Status=0, MOMSN=2108, MT Status=0, MTMSN=0
2017-04-14T05:07:16.582Z,1492146436.582 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:07:16.599Z,1492146436.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:16.614Z,1492146436.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:16.997Z,1492146436.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:17.012Z,1492146437.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:17.408Z,1492146437.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:17.436Z,1492146437.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:17.789Z,1492146437.789 [NAL9602](INFO): GPS fix at 20170414T050726: (36.802352, -121.787103)
2017-04-14T05:07:17.806Z,1492146437.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:17.866Z,1492146437.866 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:07:17.866Z,1492146437.866 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:07:18.216Z,1492146438.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:18.232Z,1492146438.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:18.232Z,1492146438.232 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:07:18.232Z,1492146438.232 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:07:18.255Z,1492146438.255 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:18.255Z,1492146438.255 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:07:18.255Z,1492146438.255 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:07:18.275Z,1492146438.275 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:07:18.275Z,1492146438.275 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:07:18.602Z,1492146438.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:18.652Z,1492146438.652 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:07:18.652Z,1492146438.652 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:07:18.652Z,1492146438.652 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:07:18.653Z,1492146438.653 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:07:19.034Z,1492146439.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:19.049Z,1492146439.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:07:19.049Z,1492146439.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:07:19.050Z,1492146439.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:07:19.055Z,1492146439.055 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:07:19.055Z,1492146439.055 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:07:19.056Z,1492146439.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:07:22.587Z,1492146442.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:22.603Z,1492146442.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:22.706Z,1492146442.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:22.783Z,1492146442.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:23.088Z,1492146443.088 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0064.lzma
2017-04-14T05:07:23.113Z,1492146443.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:23.149Z,1492146443.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:23.513Z,1492146443.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:23.549Z,1492146443.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:23.881Z,1492146443.881 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0064.lzma.bak
2017-04-14T05:07:23.882Z,1492146443.882 [DataOverHttps](INFO): SBD MOMSN=4885190
2017-04-14T05:07:23.955Z,1492146443.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:24.048Z,1492146444.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:24.321Z,1492146444.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:24.362Z,1492146444.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:24.709Z,1492146444.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:24.730Z,1492146444.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:28.363Z,1492146448.363 [NAL9602](INFO): Powering down
2017-04-14T05:07:28.387Z,1492146448.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:28.478Z,1492146448.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:28.582Z,1492146448.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:28.613Z,1492146448.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:28.957Z,1492146448.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:29.020Z,1492146449.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:29.369Z,1492146449.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:29.385Z,1492146449.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:29.757Z,1492146449.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:29.810Z,1492146449.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:30.159Z,1492146450.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:30.286Z,1492146450.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:36.016Z,1492146456.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:36.074Z,1492146456.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:36.224Z,1492146456.224 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0065.lzma
2017-04-14T05:07:36.264Z,1492146456.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:36.342Z,1492146456.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:36.615Z,1492146456.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:36.662Z,1492146456.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:36.993Z,1492146456.993 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0065.lzma.bak
2017-04-14T05:07:36.994Z,1492146456.994 [DataOverHttps](INFO): SBD MOMSN=4885193
2017-04-14T05:07:37.019Z,1492146457.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:37.079Z,1492146457.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:37.444Z,1492146457.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:37.469Z,1492146457.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:37.478Z,1492146457.478 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:07:37.478Z,1492146457.478 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:07:37.479Z,1492146457.478 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:07:37.827Z,1492146457.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:37.842Z,1492146457.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:41.712Z,1492146461.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:41.743Z,1492146461.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:41.839Z,1492146461.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:41.877Z,1492146461.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:42.264Z,1492146462.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:42.311Z,1492146462.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:42.614Z,1492146462.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:42.694Z,1492146462.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:43.014Z,1492146463.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:43.037Z,1492146463.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:43.402Z,1492146463.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:43.469Z,1492146463.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:43.814Z,1492146463.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:43.832Z,1492146463.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:44.249Z,1492146464.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:44.330Z,1492146464.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:44.607Z,1492146464.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:44.656Z,1492146464.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:45.005Z,1492146465.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:45.023Z,1492146465.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:45.404Z,1492146465.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:45.421Z,1492146465.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:45.795Z,1492146465.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:45.916Z,1492146465.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:46.201Z,1492146466.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:46.218Z,1492146466.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:46.597Z,1492146466.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:46.619Z,1492146466.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:47.016Z,1492146467.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:47.058Z,1492146467.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:47.399Z,1492146467.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:47.432Z,1492146467.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:47.797Z,1492146467.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:47.970Z,1492146467.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:48.203Z,1492146468.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:48.255Z,1492146468.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:48.604Z,1492146468.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:48.652Z,1492146468.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:49.006Z,1492146469.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:49.023Z,1492146469.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:49.405Z,1492146469.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:49.423Z,1492146469.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:49.799Z,1492146469.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:49.838Z,1492146469.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:50.202Z,1492146470.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:50.218Z,1492146470.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:50.602Z,1492146470.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:50.618Z,1492146470.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:51.012Z,1492146471.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:51.031Z,1492146471.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:51.054Z,1492146471.054 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:51.054Z,1492146471.054 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:07:51.054Z,1492146471.054 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:07:51.080Z,1492146471.080 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:07:51.405Z,1492146471.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:51.463Z,1492146471.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:51.485Z,1492146471.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:07:51.486Z,1492146471.486 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:07:51.804Z,1492146471.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:51.882Z,1492146471.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:51.965Z,1492146471.965 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:07:51.966Z,1492146471.966 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:07:51.966Z,1492146471.966 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:07:52.217Z,1492146472.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:52.327Z,1492146472.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:52.640Z,1492146472.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:52.702Z,1492146472.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:52.000Z,1492146473.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:53.047Z,1492146473.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:53.427Z,1492146473.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:53.468Z,1492146473.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:53.807Z,1492146473.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:53.835Z,1492146473.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:54.244Z,1492146474.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:54.261Z,1492146474.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:54.598Z,1492146474.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:54.650Z,1492146474.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:55.025Z,1492146475.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:55.075Z,1492146475.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:55.414Z,1492146475.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:55.498Z,1492146475.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:55.832Z,1492146475.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:55.918Z,1492146475.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:56.342Z,1492146476.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:56.457Z,1492146476.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:56.607Z,1492146476.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:56.666Z,1492146476.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:57.004Z,1492146477.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:57.115Z,1492146477.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:57.403Z,1492146477.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:57.418Z,1492146477.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:57.816Z,1492146477.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:57.865Z,1492146477.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:58.304Z,1492146478.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:58.406Z,1492146478.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:58.599Z,1492146478.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:58.665Z,1492146478.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:59.062Z,1492146479.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:59.164Z,1492146479.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:59.411Z,1492146479.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:59.470Z,1492146479.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:07:59.798Z,1492146479.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:07:59.896Z,1492146479.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:00.199Z,1492146480.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:00.279Z,1492146480.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:00.606Z,1492146480.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:00.641Z,1492146480.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:01.007Z,1492146481.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:01.022Z,1492146481.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:01.407Z,1492146481.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:01.423Z,1492146481.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:01.799Z,1492146481.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:01.910Z,1492146481.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:02.202Z,1492146482.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:02.217Z,1492146482.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:02.609Z,1492146482.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:02.625Z,1492146482.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:03.009Z,1492146483.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:03.030Z,1492146483.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:03.408Z,1492146483.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:03.424Z,1492146483.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:03.799Z,1492146483.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:03.815Z,1492146483.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:04.204Z,1492146484.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:04.244Z,1492146484.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:04.597Z,1492146484.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:04.628Z,1492146484.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:04.997Z,1492146484.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:05.034Z,1492146485.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:05.409Z,1492146485.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:05.442Z,1492146485.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:05.794Z,1492146485.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:05.810Z,1492146485.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:06.217Z,1492146486.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:06.233Z,1492146486.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:06.608Z,1492146486.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:06.632Z,1492146486.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:07.002Z,1492146487.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:07.026Z,1492146487.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:07.407Z,1492146487.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:07.431Z,1492146487.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:07.797Z,1492146487.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:07.836Z,1492146487.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:08.255Z,1492146488.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:08.316Z,1492146488.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:08.609Z,1492146488.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:08.641Z,1492146488.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:09.028Z,1492146489.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:09.106Z,1492146489.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:09.445Z,1492146489.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:09.496Z,1492146489.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:09.805Z,1492146489.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:09.828Z,1492146489.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:10.239Z,1492146490.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:10.312Z,1492146490.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:10.626Z,1492146490.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:10.671Z,1492146490.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:10.999Z,1492146490.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:11.074Z,1492146491.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:11.407Z,1492146491.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:11.422Z,1492146491.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:11.815Z,1492146491.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:11.888Z,1492146491.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:12.242Z,1492146492.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:12.294Z,1492146492.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:12.599Z,1492146492.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:12.639Z,1492146492.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:12.997Z,1492146492.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:13.038Z,1492146493.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:13.397Z,1492146493.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:13.447Z,1492146493.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:13.851Z,1492146493.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:13.920Z,1492146493.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:14.205Z,1492146494.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:14.266Z,1492146494.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:14.609Z,1492146494.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:14.625Z,1492146494.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:15.004Z,1492146495.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:15.027Z,1492146495.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:15.406Z,1492146495.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:15.426Z,1492146495.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:15.795Z,1492146495.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:15.888Z,1492146495.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:16.195Z,1492146496.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:16.211Z,1492146496.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:16.597Z,1492146496.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:16.618Z,1492146496.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:17.000Z,1492146497.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:17.016Z,1492146497.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:17.413Z,1492146497.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:17.442Z,1492146497.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:17.839Z,1492146497.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:17.916Z,1492146497.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:18.202Z,1492146498.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:18.219Z,1492146498.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:18.605Z,1492146498.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:18.625Z,1492146498.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:19.004Z,1492146499.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:19.026Z,1492146499.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:19.414Z,1492146499.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:19.432Z,1492146499.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:19.814Z,1492146499.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:19.954Z,1492146499.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:20.205Z,1492146500.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:20.237Z,1492146500.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:20.609Z,1492146500.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:20.647Z,1492146500.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:21.011Z,1492146501.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:21.026Z,1492146501.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:21.415Z,1492146501.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:21.456Z,1492146501.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:21.810Z,1492146501.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:21.830Z,1492146501.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:22.200Z,1492146502.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:22.252Z,1492146502.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:22.629Z,1492146502.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:22.646Z,1492146502.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:23.005Z,1492146503.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:23.050Z,1492146503.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:23.402Z,1492146503.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:23.426Z,1492146503.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:23.803Z,1492146503.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:23.824Z,1492146503.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:24.219Z,1492146504.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:24.295Z,1492146504.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:24.597Z,1492146504.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:24.624Z,1492146504.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:24.997Z,1492146504.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:25.035Z,1492146505.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:25.397Z,1492146505.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:25.524Z,1492146505.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:25.794Z,1492146505.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:25.810Z,1492146505.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:26.253Z,1492146506.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:26.309Z,1492146506.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:26.605Z,1492146506.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:26.620Z,1492146506.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:27.007Z,1492146507.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:27.063Z,1492146507.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:27.406Z,1492146507.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:27.463Z,1492146507.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:27.831Z,1492146507.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:27.893Z,1492146507.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:28.248Z,1492146508.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:28.265Z,1492146508.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:28.610Z,1492146508.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:28.647Z,1492146508.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:29.001Z,1492146509.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:29.052Z,1492146509.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:29.406Z,1492146509.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:29.421Z,1492146509.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:29.854Z,1492146509.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:29.929Z,1492146509.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:30.205Z,1492146510.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:30.228Z,1492146510.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:30.612Z,1492146510.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:30.634Z,1492146510.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:31.011Z,1492146511.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:31.044Z,1492146511.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:31.406Z,1492146511.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:31.424Z,1492146511.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:31.887Z,1492146511.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:31.928Z,1492146511.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:32.206Z,1492146512.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:32.233Z,1492146512.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:32.604Z,1492146512.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:32.629Z,1492146512.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:33.016Z,1492146513.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:33.032Z,1492146513.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:33.397Z,1492146513.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:33.440Z,1492146513.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:33.858Z,1492146513.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:33.917Z,1492146513.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:34.205Z,1492146514.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:34.220Z,1492146514.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:34.606Z,1492146514.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:34.627Z,1492146514.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:35.025Z,1492146515.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:35.070Z,1492146515.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:35.414Z,1492146515.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:35.450Z,1492146515.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:35.842Z,1492146515.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:35.925Z,1492146515.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:36.201Z,1492146516.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:36.246Z,1492146516.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:36.597Z,1492146516.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:36.634Z,1492146516.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:37.028Z,1492146517.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:37.055Z,1492146517.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:37.407Z,1492146517.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:37.439Z,1492146517.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:37.816Z,1492146517.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:37.854Z,1492146517.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:38.214Z,1492146518.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:38.280Z,1492146518.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:42.575Z,1492146522.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:42.664Z,1492146522.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:42.744Z,1492146522.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:42.780Z,1492146522.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:43.153Z,1492146523.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:43.185Z,1492146523.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:43.551Z,1492146523.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:43.607Z,1492146523.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:43.957Z,1492146523.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:44.014Z,1492146524.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:44.358Z,1492146524.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:44.423Z,1492146524.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:44.752Z,1492146524.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:44.813Z,1492146524.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:45.157Z,1492146525.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:45.175Z,1492146525.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:45.550Z,1492146525.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:45.585Z,1492146525.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:45.965Z,1492146525.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:45.989Z,1492146525.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:46.369Z,1492146526.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:46.389Z,1492146526.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:46.745Z,1492146526.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:46.775Z,1492146526.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:47.147Z,1492146527.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:47.190Z,1492146527.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:47.550Z,1492146527.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:47.582Z,1492146527.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:47.947Z,1492146527.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:47.987Z,1492146527.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:48.353Z,1492146528.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:48.380Z,1492146528.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:48.753Z,1492146528.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:48.783Z,1492146528.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:49.153Z,1492146529.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:49.184Z,1492146529.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:49.554Z,1492146529.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:49.585Z,1492146529.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:49.947Z,1492146529.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:49.991Z,1492146529.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:50.358Z,1492146530.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:50.392Z,1492146530.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:50.752Z,1492146530.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:50.784Z,1492146530.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:51.150Z,1492146531.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:51.167Z,1492146531.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:51.555Z,1492146531.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:51.571Z,1492146531.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:51.956Z,1492146531.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:51.975Z,1492146531.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:52.358Z,1492146532.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:52.375Z,1492146532.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:52.758Z,1492146532.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:52.822Z,1492146532.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:53.147Z,1492146533.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:53.203Z,1492146533.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:53.557Z,1492146533.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:53.584Z,1492146533.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:53.951Z,1492146533.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:53.967Z,1492146533.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:54.351Z,1492146534.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:54.385Z,1492146534.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:54.764Z,1492146534.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:54.809Z,1492146534.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:55.162Z,1492146535.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:55.196Z,1492146535.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:55.556Z,1492146535.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:55.605Z,1492146535.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:55.956Z,1492146535.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:56.011Z,1492146536.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:56.358Z,1492146536.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:56.389Z,1492146536.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:56.747Z,1492146536.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:56.840Z,1492146536.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:57.150Z,1492146537.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:57.221Z,1492146537.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:57.556Z,1492146537.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:57.592Z,1492146537.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:57.951Z,1492146537.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:58.032Z,1492146538.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:58.361Z,1492146538.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:58.378Z,1492146538.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:58.766Z,1492146538.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:58.813Z,1492146538.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:59.156Z,1492146539.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:59.215Z,1492146539.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:59.555Z,1492146539.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:59.578Z,1492146539.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:08:59.960Z,1492146539.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:08:59.976Z,1492146539.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:00.346Z,1492146540.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:00.390Z,1492146540.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:00.747Z,1492146540.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:00.790Z,1492146540.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:01.149Z,1492146541.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:01.182Z,1492146541.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:01.545Z,1492146541.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:01.573Z,1492146541.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:01.987Z,1492146541.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:02.003Z,1492146542.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:02.351Z,1492146542.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:02.393Z,1492146542.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:02.747Z,1492146542.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:02.796Z,1492146542.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:03.156Z,1492146543.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:03.171Z,1492146543.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:03.553Z,1492146543.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:03.574Z,1492146543.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:03.960Z,1492146543.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:03.988Z,1492146543.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:04.366Z,1492146544.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:04.382Z,1492146544.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:04.763Z,1492146544.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:04.798Z,1492146544.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:05.157Z,1492146545.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:05.210Z,1492146545.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:05.558Z,1492146545.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:05.598Z,1492146545.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:05.973Z,1492146545.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:06.041Z,1492146546.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:06.355Z,1492146546.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:06.405Z,1492146546.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:06.748Z,1492146546.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:06.785Z,1492146546.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:07.147Z,1492146547.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:07.213Z,1492146547.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:07.591Z,1492146547.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:07.720Z,1492146547.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:07.967Z,1492146547.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:08.038Z,1492146548.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:08.363Z,1492146548.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:08.464Z,1492146548.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:08.750Z,1492146548.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:08.839Z,1492146548.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:09.166Z,1492146549.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:09.220Z,1492146549.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:09.546Z,1492146549.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:09.604Z,1492146549.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:09.948Z,1492146549.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:09.985Z,1492146549.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:10.366Z,1492146550.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:10.435Z,1492146550.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:10.766Z,1492146550.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:10.876Z,1492146550.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:11.148Z,1492146551.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:11.246Z,1492146551.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:11.550Z,1492146551.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:11.578Z,1492146551.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:11.976Z,1492146551.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:12.002Z,1492146552.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:12.454Z,1492146552.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:12.632Z,1492146552.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:12.909Z,1492146552.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:13.090Z,1492146553.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:13.423Z,1492146553.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:13.638Z,1492146553.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:14.096Z,1492146554.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:14.255Z,1492146554.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:14.577Z,1492146554.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:14.687Z,1492146554.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:14.966Z,1492146554.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:15.095Z,1492146555.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:15.407Z,1492146555.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:15.588Z,1492146555.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:16.052Z,1492146556.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:16.262Z,1492146556.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:16.720Z,1492146556.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:16.854Z,1492146556.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:17.246Z,1492146557.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:17.330Z,1492146557.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:17.665Z,1492146557.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:17.753Z,1492146557.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:18.109Z,1492146558.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:18.269Z,1492146558.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:18.530Z,1492146558.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:18.599Z,1492146558.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:18.928Z,1492146558.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:19.040Z,1492146559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:19.366Z,1492146559.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:19.562Z,1492146559.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:19.936Z,1492146559.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:20.128Z,1492146560.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:20.383Z,1492146560.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:20.572Z,1492146560.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:20.585Z,1492146560.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:20.859Z,1492146560.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:21.085Z,1492146561.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:21.311Z,1492146561.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:21.384Z,1492146561.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:21.472Z,1492146561.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:21.720Z,1492146561.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:21.757Z,1492146561.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:22.156Z,1492146562.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:22.330Z,1492146562.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:22.605Z,1492146562.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:22.663Z,1492146562.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:22.954Z,1492146562.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:23.037Z,1492146563.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:23.350Z,1492146563.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:23.404Z,1492146563.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:23.805Z,1492146563.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:23.821Z,1492146563.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:24.138Z,1492146564.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:24.197Z,1492146564.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:24.542Z,1492146564.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:24.583Z,1492146564.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:24.941Z,1492146564.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:24.969Z,1492146564.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:25.343Z,1492146565.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:25.364Z,1492146565.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:25.793Z,1492146565.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:25.886Z,1492146565.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:26.136Z,1492146566.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:26.160Z,1492146566.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:26.544Z,1492146566.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:26.627Z,1492146566.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:26.941Z,1492146566.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:26.957Z,1492146566.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:27.342Z,1492146567.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:27.358Z,1492146567.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:27.882Z,1492146567.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:27.966Z,1492146567.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:28.157Z,1492146568.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:28.221Z,1492146568.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:28.537Z,1492146568.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:28.610Z,1492146568.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:28.938Z,1492146568.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:28.981Z,1492146568.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:29.365Z,1492146569.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:29.423Z,1492146569.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:29.791Z,1492146569.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:29.856Z,1492146569.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:30.158Z,1492146570.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:30.252Z,1492146570.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:30.554Z,1492146570.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:30.604Z,1492146570.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:30.942Z,1492146570.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:31.019Z,1492146571.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:31.341Z,1492146571.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:31.387Z,1492146571.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:31.767Z,1492146571.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:31.891Z,1492146571.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:32.135Z,1492146572.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:32.196Z,1492146572.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:32.553Z,1492146572.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:32.597Z,1492146572.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:32.948Z,1492146572.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:32.966Z,1492146572.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:33.347Z,1492146573.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:33.376Z,1492146573.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:33.743Z,1492146573.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:33.763Z,1492146573.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:34.148Z,1492146574.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:34.182Z,1492146574.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:34.544Z,1492146574.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:34.562Z,1492146574.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:34.935Z,1492146574.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:35.033Z,1492146575.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:35.342Z,1492146575.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:35.415Z,1492146575.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:35.734Z,1492146575.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:35.784Z,1492146575.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:36.147Z,1492146576.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:36.179Z,1492146576.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:36.542Z,1492146576.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:36.600Z,1492146576.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:36.942Z,1492146576.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:37.010Z,1492146577.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:37.349Z,1492146577.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:37.381Z,1492146577.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:37.768Z,1492146577.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:37.805Z,1492146577.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:38.165Z,1492146578.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:38.199Z,1492146578.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:38.539Z,1492146578.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:38.622Z,1492146578.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:43.152Z,1492146583.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:43.262Z,1492146583.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:43.383Z,1492146583.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:43.452Z,1492146583.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:43.773Z,1492146583.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:43.842Z,1492146583.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:44.168Z,1492146584.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:44.215Z,1492146584.215 [PNI_TCM](ERROR): CRC does not match. Expected:0x22551 got:0x22148
2017-04-14T05:09:44.283Z,1492146584.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:44.570Z,1492146584.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:44.613Z,1492146584.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:44.964Z,1492146584.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:45.062Z,1492146585.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:45.400Z,1492146585.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:45.460Z,1492146585.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:45.827Z,1492146585.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:45.868Z,1492146585.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:46.177Z,1492146586.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:46.225Z,1492146586.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:46.570Z,1492146586.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:46.613Z,1492146586.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:46.965Z,1492146586.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:47.012Z,1492146587.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:47.376Z,1492146587.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:47.415Z,1492146587.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:47.787Z,1492146587.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:47.842Z,1492146587.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:48.181Z,1492146588.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:48.276Z,1492146588.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:48.560Z,1492146588.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:48.611Z,1492146588.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:48.959Z,1492146588.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:49.010Z,1492146589.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:49.367Z,1492146589.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:49.423Z,1492146589.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:49.763Z,1492146589.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:49.825Z,1492146589.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:50.166Z,1492146590.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:50.215Z,1492146590.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:50.597Z,1492146590.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:50.722Z,1492146590.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:51.000Z,1492146591.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:51.033Z,1492146591.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:51.354Z,1492146591.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:51.430Z,1492146591.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:51.839Z,1492146591.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:51.892Z,1492146591.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:52.185Z,1492146592.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:52.218Z,1492146592.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:52.570Z,1492146592.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:52.640Z,1492146592.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:52.970Z,1492146592.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:53.031Z,1492146593.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:53.378Z,1492146593.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:53.421Z,1492146593.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:53.770Z,1492146593.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:53.823Z,1492146593.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:54.177Z,1492146594.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:54.194Z,1492146594.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:54.558Z,1492146594.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:54.599Z,1492146594.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:54.968Z,1492146594.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:55.013Z,1492146595.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:55.371Z,1492146595.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:55.420Z,1492146595.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:55.768Z,1492146595.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:55.822Z,1492146595.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:56.195Z,1492146596.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:56.262Z,1492146596.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:56.576Z,1492146596.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:56.648Z,1492146596.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:56.968Z,1492146596.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:57.004Z,1492146597.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:57.407Z,1492146597.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:57.467Z,1492146597.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:57.796Z,1492146597.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:57.913Z,1492146597.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:58.165Z,1492146598.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:58.199Z,1492146598.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:58.562Z,1492146598.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:58.592Z,1492146598.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:58.963Z,1492146598.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:59.037Z,1492146599.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:59.409Z,1492146599.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:59.449Z,1492146599.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:09:59.846Z,1492146599.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:09:59.912Z,1492146599.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:00.173Z,1492146600.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:00.211Z,1492146600.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:00.566Z,1492146600.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:00.660Z,1492146600.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:00.957Z,1492146600.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:00.991Z,1492146600.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:01.361Z,1492146601.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:01.370Z,1492146601.370 [PNI_TCM](ERROR): CRC does not match. Expected:0x2232 got:0x49450
2017-04-14T05:10:01.404Z,1492146601.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:01.762Z,1492146601.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:01.793Z,1492146601.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:02.166Z,1492146602.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:02.209Z,1492146602.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:02.567Z,1492146602.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:02.607Z,1492146602.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:02.980Z,1492146602.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:03.019Z,1492146603.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:03.256Z,1492146603.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:03.378Z,1492146603.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:03.434Z,1492146603.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:03.816Z,1492146603.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:03.877Z,1492146603.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:04.052Z,1492146604.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:04.293Z,1492146604.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:04.419Z,1492146604.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:04.464Z,1492146604.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:04.681Z,1492146604.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:04.765Z,1492146604.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:05.134Z,1492146605.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:05.245Z,1492146605.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:05.260Z,1492146605.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:05.528Z,1492146605.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:05.621Z,1492146605.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:05.887Z,1492146605.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:05.979Z,1492146605.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:06.056Z,1492146606.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:06.302Z,1492146606.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:06.343Z,1492146606.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:06.460Z,1492146606.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:06.697Z,1492146606.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:06.751Z,1492146606.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:07.079Z,1492146607.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:07.163Z,1492146607.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:07.484Z,1492146607.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:07.537Z,1492146607.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:07.908Z,1492146607.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:07.952Z,1492146607.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:08.281Z,1492146608.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:08.306Z,1492146608.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:08.689Z,1492146608.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:08.718Z,1492146608.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:09.090Z,1492146609.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:09.119Z,1492146609.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:09.485Z,1492146609.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:09.532Z,1492146609.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:09.885Z,1492146609.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:09.923Z,1492146609.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:10.287Z,1492146610.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:10.320Z,1492146610.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:10.689Z,1492146610.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:10.734Z,1492146610.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:11.108Z,1492146611.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:11.174Z,1492146611.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:11.505Z,1492146611.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:11.568Z,1492146611.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:11.898Z,1492146611.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:11.918Z,1492146611.918 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:10:11.918Z,1492146611.918 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:10:11.919Z,1492146611.918 [BPC1](ERROR): Data Fault
2017-04-14T05:10:11.989Z,1492146611.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:12.164Z,1492146612.164 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:10:12.342Z,1492146612.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:12.410Z,1492146612.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:12.828Z,1492146612.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:12.909Z,1492146612.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:13.133Z,1492146613.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:13.181Z,1492146613.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:13.297Z,1492146613.297 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:10:13.297Z,1492146613.297 [BPC1] No Fault, FailCount= 1
2017-04-14T05:10:13.513Z,1492146613.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:13.749Z,1492146613.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:14.013Z,1492146614.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:14.122Z,1492146614.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:14.372Z,1492146614.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:14.414Z,1492146614.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:14.785Z,1492146614.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:14.822Z,1492146614.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:15.178Z,1492146615.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:15.199Z,1492146615.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:15.577Z,1492146615.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:15.605Z,1492146615.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:15.986Z,1492146615.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:16.066Z,1492146616.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:16.380Z,1492146616.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:16.420Z,1492146616.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:16.769Z,1492146616.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:16.790Z,1492146616.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:17.203Z,1492146617.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:17.231Z,1492146617.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:17.569Z,1492146617.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:17.596Z,1492146617.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:18.030Z,1492146618.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:18.074Z,1492146618.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:18.365Z,1492146618.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:18.382Z,1492146618.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:18.777Z,1492146618.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:18.794Z,1492146618.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:19.178Z,1492146619.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:19.194Z,1492146619.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:19.194Z,1492146619.194 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:10:19.194Z,1492146619.194 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:10:19.224Z,1492146619.224 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:19.224Z,1492146619.224 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:10:19.224Z,1492146619.224 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:10:19.292Z,1492146619.292 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:10:19.292Z,1492146619.292 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:10:19.578Z,1492146619.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:19.719Z,1492146619.719 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:10:19.719Z,1492146619.719 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:10:19.720Z,1492146619.720 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:10:19.720Z,1492146619.720 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:10:19.970Z,1492146619.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:20.000Z,1492146620.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:10:20.001Z,1492146620.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:10:20.001Z,1492146620.001 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:10:20.010Z,1492146620.010 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:10:20.011Z,1492146620.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:10:20.015Z,1492146620.015 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:10:20.368Z,1492146620.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:20.448Z,1492146620.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:20.773Z,1492146620.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:20.789Z,1492146620.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:21.171Z,1492146621.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:21.187Z,1492146621.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:21.576Z,1492146621.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:21.684Z,1492146621.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:22.004Z,1492146622.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:22.089Z,1492146622.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:22.450Z,1492146622.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:22.544Z,1492146622.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:22.787Z,1492146622.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:22.838Z,1492146622.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:23.168Z,1492146623.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:23.243Z,1492146623.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:23.577Z,1492146623.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:23.697Z,1492146623.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:23.967Z,1492146623.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:24.013Z,1492146624.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:24.375Z,1492146624.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:24.425Z,1492146624.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:24.782Z,1492146624.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:24.798Z,1492146624.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:25.176Z,1492146625.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:25.262Z,1492146625.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:25.613Z,1492146625.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:25.867Z,1492146625.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:26.066Z,1492146626.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:26.120Z,1492146626.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:26.441Z,1492146626.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:26.559Z,1492146626.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:26.848Z,1492146626.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:26.878Z,1492146626.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:27.250Z,1492146627.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:27.266Z,1492146627.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:27.639Z,1492146627.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:27.746Z,1492146627.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:28.040Z,1492146628.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:28.080Z,1492146628.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:28.439Z,1492146628.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:28.525Z,1492146628.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:28.839Z,1492146628.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:28.891Z,1492146628.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:29.237Z,1492146629.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:29.253Z,1492146629.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:29.642Z,1492146629.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:29.681Z,1492146629.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:30.054Z,1492146630.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:30.139Z,1492146630.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:30.447Z,1492146630.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:30.464Z,1492146630.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:30.847Z,1492146630.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:30.870Z,1492146630.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:31.246Z,1492146631.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:31.261Z,1492146631.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:31.647Z,1492146631.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:31.663Z,1492146631.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:32.051Z,1492146632.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:32.083Z,1492146632.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:32.446Z,1492146632.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:32.480Z,1492146632.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:32.835Z,1492146632.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:32.944Z,1492146632.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:33.237Z,1492146633.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:33.271Z,1492146633.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:33.713Z,1492146633.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:33.740Z,1492146633.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:34.032Z,1492146634.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:34.090Z,1492146634.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:34.442Z,1492146634.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:34.478Z,1492146634.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:34.842Z,1492146634.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:34.876Z,1492146634.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:35.241Z,1492146635.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:35.266Z,1492146635.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:35.701Z,1492146635.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:35.724Z,1492146635.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:36.046Z,1492146636.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:36.071Z,1492146636.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:36.448Z,1492146636.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:36.465Z,1492146636.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:36.845Z,1492146636.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:36.862Z,1492146636.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:37.256Z,1492146637.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:37.271Z,1492146637.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:37.682Z,1492146637.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:37.734Z,1492146637.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:38.053Z,1492146638.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:38.085Z,1492146638.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:38.441Z,1492146638.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:38.524Z,1492146638.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:38.844Z,1492146638.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:38.873Z,1492146638.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:42.619Z,1492146642.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:42.710Z,1492146642.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:42.821Z,1492146642.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:42.872Z,1492146642.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:43.182Z,1492146643.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:43.202Z,1492146643.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:43.580Z,1492146643.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:43.627Z,1492146643.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:44.014Z,1492146644.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:44.054Z,1492146644.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:44.373Z,1492146644.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:44.445Z,1492146644.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:44.771Z,1492146644.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:44.836Z,1492146644.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:45.173Z,1492146645.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:45.200Z,1492146645.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:45.595Z,1492146645.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:45.618Z,1492146645.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:46.014Z,1492146646.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:46.063Z,1492146646.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:46.373Z,1492146646.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:46.400Z,1492146646.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:46.787Z,1492146646.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:46.805Z,1492146646.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:47.201Z,1492146647.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:47.222Z,1492146647.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:47.583Z,1492146647.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:47.673Z,1492146647.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:47.979Z,1492146647.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:47.995Z,1492146647.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:48.378Z,1492146648.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:48.394Z,1492146648.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:48.777Z,1492146648.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:48.793Z,1492146648.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:49.182Z,1492146649.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:49.199Z,1492146649.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:49.638Z,1492146649.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:49.699Z,1492146649.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:49.975Z,1492146649.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:49.994Z,1492146649.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:50.376Z,1492146650.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:50.407Z,1492146650.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:50.781Z,1492146650.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:50.796Z,1492146650.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:51.199Z,1492146651.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:51.244Z,1492146651.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:51.603Z,1492146651.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:51.678Z,1492146651.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:51.970Z,1492146651.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:52.018Z,1492146652.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:52.042Z,1492146652.042 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:52.042Z,1492146652.042 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:10:52.042Z,1492146652.042 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:10:52.079Z,1492146652.079 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:10:52.405Z,1492146652.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:52.421Z,1492146652.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:52.440Z,1492146652.440 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:10:52.440Z,1492146652.441 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:10:52.785Z,1492146652.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:52.826Z,1492146652.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:52.832Z,1492146652.832 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:10:52.832Z,1492146652.832 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:10:52.833Z,1492146652.833 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:10:53.177Z,1492146653.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:53.195Z,1492146653.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:53.602Z,1492146653.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:53.689Z,1492146653.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:53.973Z,1492146653.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:53.993Z,1492146653.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:54.371Z,1492146654.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:54.386Z,1492146654.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:54.779Z,1492146654.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:54.796Z,1492146654.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:55.169Z,1492146655.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:55.204Z,1492146655.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:55.583Z,1492146655.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:55.599Z,1492146655.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:55.970Z,1492146655.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:55.989Z,1492146655.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:56.375Z,1492146656.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:56.392Z,1492146656.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:56.781Z,1492146656.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:56.797Z,1492146656.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:57.173Z,1492146657.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:57.226Z,1492146657.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:57.577Z,1492146657.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:57.598Z,1492146657.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:58.003Z,1492146658.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:58.077Z,1492146658.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:58.390Z,1492146658.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:58.427Z,1492146658.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:58.765Z,1492146658.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:58.830Z,1492146658.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:59.188Z,1492146659.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:59.231Z,1492146659.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:10:59.575Z,1492146659.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:10:59.601Z,1492146659.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:00.051Z,1492146660.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:00.128Z,1492146660.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:00.373Z,1492146660.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:00.412Z,1492146660.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:00.770Z,1492146660.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:00.812Z,1492146660.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:01.172Z,1492146661.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:01.212Z,1492146661.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:01.666Z,1492146661.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:01.740Z,1492146661.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:01.971Z,1492146661.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:02.038Z,1492146662.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:02.407Z,1492146662.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:02.423Z,1492146662.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:02.812Z,1492146662.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:02.873Z,1492146662.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:03.177Z,1492146663.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:03.196Z,1492146663.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:03.666Z,1492146663.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:03.714Z,1492146663.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:04.079Z,1492146664.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:04.190Z,1492146664.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:04.404Z,1492146664.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:04.477Z,1492146664.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:04.771Z,1492146664.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:04.809Z,1492146664.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:05.171Z,1492146665.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:05.210Z,1492146665.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:05.640Z,1492146665.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:05.695Z,1492146665.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:05.991Z,1492146665.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:06.026Z,1492146666.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:06.387Z,1492146666.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:06.404Z,1492146666.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:06.780Z,1492146666.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:06.796Z,1492146666.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:07.179Z,1492146667.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:07.195Z,1492146667.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:07.628Z,1492146667.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:07.693Z,1492146667.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:07.985Z,1492146667.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:08.026Z,1492146668.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:08.373Z,1492146668.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:08.399Z,1492146668.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:08.769Z,1492146668.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:08.808Z,1492146668.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:09.177Z,1492146669.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:09.204Z,1492146669.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:09.576Z,1492146669.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:09.700Z,1492146669.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:09.978Z,1492146669.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:10.046Z,1492146670.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:10.375Z,1492146670.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:10.391Z,1492146670.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:10.777Z,1492146670.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:10.835Z,1492146670.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:11.169Z,1492146671.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:11.195Z,1492146671.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:11.569Z,1492146671.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:11.638Z,1492146671.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:11.993Z,1492146671.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:12.070Z,1492146672.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:12.396Z,1492146672.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:12.449Z,1492146672.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:12.771Z,1492146672.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:12.811Z,1492146672.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:13.179Z,1492146673.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:13.214Z,1492146673.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:13.584Z,1492146673.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:13.640Z,1492146673.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:13.992Z,1492146673.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:14.060Z,1492146674.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:14.381Z,1492146674.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:14.408Z,1492146674.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:14.782Z,1492146674.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:14.810Z,1492146674.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:15.163Z,1492146675.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:15.195Z,1492146675.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:15.666Z,1492146675.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:15.722Z,1492146675.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:15.969Z,1492146675.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:16.014Z,1492146676.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:16.377Z,1492146676.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:16.406Z,1492146676.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:16.766Z,1492146676.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:16.794Z,1492146676.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:17.173Z,1492146677.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:17.212Z,1492146677.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:17.614Z,1492146677.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:17.664Z,1492146677.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:17.969Z,1492146677.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:17.984Z,1492146677.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:18.381Z,1492146678.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:18.413Z,1492146678.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:18.776Z,1492146678.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:18.813Z,1492146678.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:19.170Z,1492146679.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:19.186Z,1492146679.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:19.626Z,1492146679.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:19.681Z,1492146679.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:19.978Z,1492146679.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:20.023Z,1492146680.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:20.394Z,1492146680.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:20.436Z,1492146680.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:20.775Z,1492146680.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:20.791Z,1492146680.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:21.174Z,1492146681.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:21.201Z,1492146681.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:21.616Z,1492146681.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:21.674Z,1492146681.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:21.979Z,1492146681.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:22.035Z,1492146682.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:22.390Z,1492146682.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:22.498Z,1492146682.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:22.776Z,1492146682.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:22.794Z,1492146682.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:23.182Z,1492146683.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:23.239Z,1492146683.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:23.638Z,1492146683.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:23.688Z,1492146683.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:23.975Z,1492146683.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:24.041Z,1492146684.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:24.382Z,1492146684.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:24.438Z,1492146684.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:24.781Z,1492146684.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:24.796Z,1492146684.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:25.178Z,1492146685.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:25.202Z,1492146685.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:25.582Z,1492146685.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:25.602Z,1492146685.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:25.987Z,1492146685.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:26.003Z,1492146686.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:26.369Z,1492146686.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:26.402Z,1492146686.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:26.780Z,1492146686.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:26.805Z,1492146686.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:27.173Z,1492146687.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:27.194Z,1492146687.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:27.577Z,1492146687.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:27.592Z,1492146687.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:27.979Z,1492146687.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:28.026Z,1492146688.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:28.380Z,1492146688.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:28.395Z,1492146688.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:28.780Z,1492146688.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:28.795Z,1492146688.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:29.174Z,1492146689.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:29.200Z,1492146689.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:29.621Z,1492146689.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:29.644Z,1492146689.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:29.976Z,1492146689.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:30.009Z,1492146690.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:30.388Z,1492146690.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:30.403Z,1492146690.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:30.769Z,1492146690.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:30.802Z,1492146690.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:31.170Z,1492146691.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:31.213Z,1492146691.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:31.599Z,1492146691.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:31.651Z,1492146691.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:31.976Z,1492146691.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:32.012Z,1492146692.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:32.374Z,1492146692.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:32.407Z,1492146692.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:32.774Z,1492146692.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:32.813Z,1492146692.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:33.174Z,1492146693.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:33.219Z,1492146693.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:33.624Z,1492146693.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:33.678Z,1492146693.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:33.977Z,1492146693.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:34.026Z,1492146694.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:34.380Z,1492146694.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:34.396Z,1492146694.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:34.778Z,1492146694.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:34.802Z,1492146694.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:35.183Z,1492146695.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:35.265Z,1492146695.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:35.611Z,1492146695.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:35.649Z,1492146695.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:35.992Z,1492146695.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:36.050Z,1492146696.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:36.384Z,1492146696.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:36.408Z,1492146696.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:36.787Z,1492146696.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:36.838Z,1492146696.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:37.185Z,1492146697.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:37.239Z,1492146697.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:37.644Z,1492146697.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:37.695Z,1492146697.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:37.973Z,1492146697.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:38.027Z,1492146698.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:38.381Z,1492146698.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:38.414Z,1492146698.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:38.777Z,1492146698.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:38.793Z,1492146698.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:39.189Z,1492146699.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:39.234Z,1492146699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:43.400Z,1492146703.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:43.423Z,1492146703.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:43.647Z,1492146703.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:43.779Z,1492146703.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:43.996Z,1492146703.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:44.036Z,1492146704.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:44.368Z,1492146704.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:44.406Z,1492146704.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:44.760Z,1492146704.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:44.798Z,1492146704.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:45.202Z,1492146705.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:45.349Z,1492146705.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:45.600Z,1492146705.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:45.669Z,1492146705.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:45.962Z,1492146705.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:46.068Z,1492146706.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:46.381Z,1492146706.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:46.447Z,1492146706.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:46.799Z,1492146706.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:46.852Z,1492146706.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:47.192Z,1492146707.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:47.244Z,1492146707.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:47.592Z,1492146707.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:47.663Z,1492146707.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:47.964Z,1492146707.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:48.057Z,1492146708.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:48.383Z,1492146708.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:48.438Z,1492146708.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:48.753Z,1492146708.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:48.798Z,1492146708.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:49.173Z,1492146709.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:49.230Z,1492146709.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:49.587Z,1492146709.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:49.646Z,1492146709.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:49.975Z,1492146709.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:50.042Z,1492146710.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:50.414Z,1492146710.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:50.421Z,1492146710.421 [PNI_TCM](ERROR): CRC does not match. Expected:0x25884 got:0x10732
2017-04-14T05:11:50.476Z,1492146710.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:50.776Z,1492146710.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:50.845Z,1492146710.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:51.160Z,1492146711.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:51.207Z,1492146711.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:51.636Z,1492146711.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:51.676Z,1492146711.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:51.980Z,1492146711.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:52.001Z,1492146712.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:52.372Z,1492146712.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:52.400Z,1492146712.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:52.753Z,1492146712.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:52.779Z,1492146712.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:53.157Z,1492146713.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:53.193Z,1492146713.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:53.581Z,1492146713.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:53.602Z,1492146713.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:53.980Z,1492146713.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:54.008Z,1492146714.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:54.410Z,1492146714.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:54.445Z,1492146714.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:54.757Z,1492146714.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:54.805Z,1492146714.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:55.163Z,1492146715.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:55.201Z,1492146715.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:55.572Z,1492146715.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:55.600Z,1492146715.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:56.011Z,1492146716.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:56.051Z,1492146716.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:56.363Z,1492146716.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:56.397Z,1492146716.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:56.761Z,1492146716.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:56.800Z,1492146716.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:57.170Z,1492146717.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:57.204Z,1492146717.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:57.570Z,1492146717.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:57.618Z,1492146717.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:57.961Z,1492146717.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:58.003Z,1492146718.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:58.366Z,1492146718.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:58.401Z,1492146718.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:58.766Z,1492146718.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:58.782Z,1492146718.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:59.162Z,1492146719.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:59.207Z,1492146719.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:59.573Z,1492146719.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:59.618Z,1492146719.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:11:59.969Z,1492146719.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:11:59.985Z,1492146719.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:00.364Z,1492146720.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:00.388Z,1492146720.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:00.767Z,1492146720.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:00.810Z,1492146720.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:01.160Z,1492146721.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:01.222Z,1492146721.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:01.568Z,1492146721.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:01.638Z,1492146721.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:01.957Z,1492146721.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:01.990Z,1492146721.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:02.353Z,1492146722.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:02.418Z,1492146722.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:02.761Z,1492146722.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:02.797Z,1492146722.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:03.153Z,1492146723.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:03.199Z,1492146723.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:03.563Z,1492146723.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:03.628Z,1492146723.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:03.961Z,1492146723.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:03.998Z,1492146723.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:04.361Z,1492146724.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:04.393Z,1492146724.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:04.769Z,1492146724.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:04.792Z,1492146724.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:05.165Z,1492146725.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:05.196Z,1492146725.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:05.606Z,1492146725.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:05.650Z,1492146725.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:05.953Z,1492146725.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:05.987Z,1492146725.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:06.353Z,1492146726.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:06.371Z,1492146726.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T05:12:06.391Z,1492146726.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:06.775Z,1492146726.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:06.792Z,1492146726.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:07.202Z,1492146727.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:07.241Z,1492146727.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:07.568Z,1492146727.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:07.598Z,1492146727.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:07.970Z,1492146727.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:07.987Z,1492146727.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:08.371Z,1492146728.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:08.387Z,1492146728.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:08.772Z,1492146728.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:08.790Z,1492146728.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:09.176Z,1492146729.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:09.192Z,1492146729.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:09.557Z,1492146729.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:09.584Z,1492146729.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:09.957Z,1492146729.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:09.984Z,1492146729.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:10.366Z,1492146730.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:10.401Z,1492146730.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:10.777Z,1492146730.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:10.793Z,1492146730.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:11.201Z,1492146731.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:11.241Z,1492146731.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:11.556Z,1492146731.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:11.594Z,1492146731.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:11.964Z,1492146731.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:12.001Z,1492146732.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:12.373Z,1492146732.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:12.401Z,1492146732.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:12.806Z,1492146732.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:12.846Z,1492146732.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:13.168Z,1492146733.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:13.193Z,1492146733.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:13.558Z,1492146733.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:13.597Z,1492146733.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:13.969Z,1492146733.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:13.992Z,1492146733.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:14.368Z,1492146734.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:14.423Z,1492146734.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:14.773Z,1492146734.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:14.801Z,1492146734.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:15.170Z,1492146735.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:15.218Z,1492146735.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:15.570Z,1492146735.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:15.586Z,1492146735.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:15.633Z,1492146735.633 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:12:15.965Z,1492146735.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:16.014Z,1492146736.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:16.368Z,1492146736.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:16.418Z,1492146736.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:16.763Z,1492146736.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:16.788Z,1492146736.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:17.172Z,1492146737.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:17.189Z,1492146737.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:17.567Z,1492146737.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:17.582Z,1492146737.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:17.969Z,1492146737.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:17.989Z,1492146737.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:18.370Z,1492146738.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:18.386Z,1492146738.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:18.772Z,1492146738.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:18.787Z,1492146738.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:19.165Z,1492146739.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:19.186Z,1492146739.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:19.634Z,1492146739.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:19.654Z,1492146739.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:19.960Z,1492146739.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:20.005Z,1492146740.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:20.367Z,1492146740.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:20.414Z,1492146740.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:20.766Z,1492146740.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:20.814Z,1492146740.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:21.174Z,1492146741.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:21.190Z,1492146741.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:21.563Z,1492146741.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:21.594Z,1492146741.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:21.962Z,1492146741.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:21.986Z,1492146741.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:22.370Z,1492146742.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:22.385Z,1492146742.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:22.762Z,1492146742.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:22.787Z,1492146742.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:23.167Z,1492146743.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:23.185Z,1492146743.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:23.578Z,1492146743.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:23.594Z,1492146743.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:24.015Z,1492146744.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:24.043Z,1492146744.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:24.372Z,1492146744.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:24.394Z,1492146744.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:24.764Z,1492146744.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:24.792Z,1492146744.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:25.165Z,1492146745.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:25.194Z,1492146745.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:25.559Z,1492146745.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:25.591Z,1492146745.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:25.961Z,1492146745.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:25.993Z,1492146745.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:26.356Z,1492146746.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:26.390Z,1492146746.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:26.757Z,1492146746.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:26.785Z,1492146746.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:27.169Z,1492146747.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:27.259Z,1492146747.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:27.565Z,1492146747.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:27.600Z,1492146747.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:27.996Z,1492146747.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:28.047Z,1492146748.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:28.365Z,1492146748.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:28.402Z,1492146748.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:28.769Z,1492146748.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:28.818Z,1492146748.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:29.166Z,1492146749.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:29.218Z,1492146749.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:29.598Z,1492146749.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:29.650Z,1492146749.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:29.965Z,1492146749.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:29.993Z,1492146749.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:30.358Z,1492146750.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:30.374Z,1492146750.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:30.769Z,1492146750.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:30.809Z,1492146750.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:31.166Z,1492146751.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:31.182Z,1492146751.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:31.562Z,1492146751.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:31.578Z,1492146751.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:31.956Z,1492146751.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:31.992Z,1492146751.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:32.357Z,1492146752.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:32.384Z,1492146752.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:32.757Z,1492146752.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:32.793Z,1492146752.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:33.161Z,1492146753.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:33.187Z,1492146753.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:33.577Z,1492146753.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:33.604Z,1492146753.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:33.953Z,1492146753.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:33.986Z,1492146753.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:34.362Z,1492146754.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:34.391Z,1492146754.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:34.761Z,1492146754.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:34.792Z,1492146754.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:35.158Z,1492146755.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:35.186Z,1492146755.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:35.557Z,1492146755.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:35.594Z,1492146755.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:35.966Z,1492146755.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:36.018Z,1492146756.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:36.362Z,1492146756.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:36.378Z,1492146756.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:36.767Z,1492146756.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:36.783Z,1492146756.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:37.161Z,1492146757.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:37.182Z,1492146757.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:37.610Z,1492146757.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:37.717Z,1492146757.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:37.953Z,1492146757.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:37.990Z,1492146757.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:37.999Z,1492146758.000 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:12:37.000Z,1492146758.000 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:12:37.000Z,1492146758.000 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:12:37.000Z,1492146758.000 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:12:38.353Z,1492146758.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:38.382Z,1492146758.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:38.403Z,1492146758.403 [Default:CheckIn:D] Stopped
2017-04-14T05:12:38.403Z,1492146758.403 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:12:38.753Z,1492146758.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:38.790Z,1492146758.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 106.551343 min 
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn:E] Stopped
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn] Stopped
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:12:38.800Z,1492146758.800 [Default:CheckIn](INFO): Running loop #16
2017-04-14T05:12:38.801Z,1492146758.801 [Default:CheckIn] Running Loop=16
2017-04-14T05:12:38.801Z,1492146758.801 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:12:38.801Z,1492146758.801 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:12:39.165Z,1492146759.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:39.188Z,1492146759.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:39.580Z,1492146759.580 [NAL9602](INFO): Powering up
2017-04-14T05:12:39.614Z,1492146759.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:39.675Z,1492146759.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:43.742Z,1492146763.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:43.834Z,1492146763.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:43.961Z,1492146763.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:43.982Z,1492146763.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:44.316Z,1492146764.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:44.417Z,1492146764.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:44.725Z,1492146764.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:44.742Z,1492146764.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:45.106Z,1492146765.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:45.158Z,1492146765.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:45.504Z,1492146765.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:45.576Z,1492146765.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:45.912Z,1492146765.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:45.964Z,1492146765.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:46.323Z,1492146766.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:46.346Z,1492146766.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:46.713Z,1492146766.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:46.743Z,1492146766.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:47.126Z,1492146767.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:47.148Z,1492146767.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:47.540Z,1492146767.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:47.583Z,1492146767.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:47.911Z,1492146767.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:47.983Z,1492146767.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:48.314Z,1492146768.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:48.333Z,1492146768.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:48.717Z,1492146768.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:48.745Z,1492146768.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:49.111Z,1492146769.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:49.136Z,1492146769.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:49.542Z,1492146769.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:49.580Z,1492146769.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:49.944Z,1492146769.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:49.980Z,1492146769.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:50.320Z,1492146770.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:50.365Z,1492146770.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:50.689Z,1492146770.689 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:12:50.714Z,1492146770.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:50.746Z,1492146770.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:51.131Z,1492146771.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:51.163Z,1492146771.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:51.527Z,1492146771.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:51.581Z,1492146771.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:51.933Z,1492146771.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:51.974Z,1492146771.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:52.368Z,1492146772.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:52.432Z,1492146772.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:52.734Z,1492146772.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:52.755Z,1492146772.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:53.109Z,1492146773.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:53.164Z,1492146773.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:53.563Z,1492146773.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:53.609Z,1492146773.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:53.921Z,1492146773.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:53.960Z,1492146773.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:54.317Z,1492146774.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:54.335Z,1492146774.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:54.714Z,1492146774.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:54.732Z,1492146774.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:55.120Z,1492146775.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:55.137Z,1492146775.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:55.517Z,1492146775.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:55.536Z,1492146775.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:55.925Z,1492146775.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:55.993Z,1492146775.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:56.305Z,1492146776.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:56.355Z,1492146776.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:56.710Z,1492146776.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:56.744Z,1492146776.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:57.107Z,1492146777.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:57.187Z,1492146777.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:57.556Z,1492146777.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:57.602Z,1492146777.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:57.907Z,1492146777.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:57.949Z,1492146777.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:58.316Z,1492146778.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:58.387Z,1492146778.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:58.717Z,1492146778.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:58.751Z,1492146778.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:59.113Z,1492146779.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:59.162Z,1492146779.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:59.510Z,1492146779.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:59.549Z,1492146779.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:12:59.918Z,1492146779.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:12:59.946Z,1492146779.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:00.315Z,1492146780.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:00.362Z,1492146780.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:00.718Z,1492146780.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:00.799Z,1492146780.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:01.112Z,1492146781.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:01.143Z,1492146781.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:01.519Z,1492146781.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:01.571Z,1492146781.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:01.921Z,1492146781.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:01.949Z,1492146781.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:02.372Z,1492146782.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:02.399Z,1492146782.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:02.710Z,1492146782.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:02.748Z,1492146782.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:03.123Z,1492146783.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:03.140Z,1492146783.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:03.503Z,1492146783.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:03.545Z,1492146783.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:03.905Z,1492146783.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:03.934Z,1492146783.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:04.307Z,1492146784.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:04.347Z,1492146784.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:04.706Z,1492146784.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:04.747Z,1492146784.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:05.107Z,1492146785.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:05.160Z,1492146785.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:05.512Z,1492146785.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:05.530Z,1492146785.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:05.930Z,1492146785.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:05.946Z,1492146785.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:06.322Z,1492146786.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:06.353Z,1492146786.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:06.707Z,1492146786.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:06.759Z,1492146786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:07.114Z,1492146787.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:07.150Z,1492146787.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:07.514Z,1492146787.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:07.532Z,1492146787.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:07.918Z,1492146787.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:07.936Z,1492146787.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:08.314Z,1492146788.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:08.332Z,1492146788.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:08.705Z,1492146788.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:08.746Z,1492146788.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:09.109Z,1492146789.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:09.126Z,1492146789.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:09.514Z,1492146789.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:09.582Z,1492146789.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:09.921Z,1492146789.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:09.962Z,1492146789.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:10.312Z,1492146790.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:10.369Z,1492146790.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:10.710Z,1492146790.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:10.741Z,1492146790.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:11.147Z,1492146791.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:11.163Z,1492146791.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:11.510Z,1492146791.510 [NAL9602](INFO): SBD MO Status=0, MOMSN=2109, MT Status=0, MTMSN=0
2017-04-14T05:13:11.510Z,1492146791.510 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:13:11.597Z,1492146791.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:11.712Z,1492146791.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:11.936Z,1492146791.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:11.984Z,1492146791.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:12.335Z,1492146792.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:12.382Z,1492146792.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:12.727Z,1492146792.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:12.801Z,1492146792.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:13.183Z,1492146793.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:13.207Z,1492146793.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:13.612Z,1492146793.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:13.685Z,1492146793.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:13.964Z,1492146793.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:14.013Z,1492146794.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:14.412Z,1492146794.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:14.501Z,1492146794.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:14.718Z,1492146794.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:14.811Z,1492146794.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:15.131Z,1492146795.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:15.199Z,1492146795.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:15.496Z,1492146795.497 [NAL9602](INFO): GPS fix at 20170414T051324: (36.802366, -121.787164)
2017-04-14T05:13:15.520Z,1492146795.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:15.661Z,1492146795.661 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:13:15.661Z,1492146795.661 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:13:15.918Z,1492146795.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:15.947Z,1492146795.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:15.967Z,1492146795.967 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:13:15.967Z,1492146795.967 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:13:16.008Z,1492146796.008 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:16.008Z,1492146796.008 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:13:16.008Z,1492146796.008 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:13:16.089Z,1492146796.089 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:13:16.089Z,1492146796.089 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:13:17.113Z,1492146797.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:17.270Z,1492146797.270 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:13:17.270Z,1492146797.270 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:13:17.279Z,1492146797.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:13:17.279Z,1492146797.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:13:17.502Z,1492146797.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:17.518Z,1492146797.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:13:17.518Z,1492146797.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:13:17.519Z,1492146797.519 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:13:17.524Z,1492146797.524 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:13:17.525Z,1492146797.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:13:17.525Z,1492146797.525 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:13:21.056Z,1492146801.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:21.146Z,1492146801.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:21.215Z,1492146801.215 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0068.lzma
2017-04-14T05:13:21.257Z,1492146801.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:21.318Z,1492146801.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:21.613Z,1492146801.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:21.629Z,1492146801.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:21.991Z,1492146801.991 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0068.lzma.bak
2017-04-14T05:13:21.991Z,1492146801.991 [DataOverHttps](INFO): SBD MOMSN=4885197
2017-04-14T05:13:22.012Z,1492146802.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:22.065Z,1492146802.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:22.432Z,1492146802.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:22.457Z,1492146802.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:22.795Z,1492146802.795 [NAL9602](INFO): Powering down
2017-04-14T05:13:22.814Z,1492146802.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:22.831Z,1492146802.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:26.577Z,1492146806.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:26.639Z,1492146806.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:26.738Z,1492146806.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:26.770Z,1492146806.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:27.134Z,1492146807.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:27.175Z,1492146807.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:27.529Z,1492146807.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:27.594Z,1492146807.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:27.930Z,1492146807.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:27.979Z,1492146807.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:28.340Z,1492146808.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:28.391Z,1492146808.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:30.640Z,1492146810.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:31.436Z,1492146811.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:32.133Z,1492146812.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:32.181Z,1492146812.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:32.279Z,1492146812.279 [DataOverHttps](INFO): Sending 124 bytes from file Logs/20170414T032153/Express0069.lzma
2017-04-14T05:13:32.300Z,1492146812.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:32.343Z,1492146812.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:32.663Z,1492146812.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:32.678Z,1492146812.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:33.022Z,1492146813.022 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0069.lzma.bak
2017-04-14T05:13:33.022Z,1492146813.022 [DataOverHttps](INFO): SBD MOMSN=4885200
2017-04-14T05:13:33.054Z,1492146813.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:33.080Z,1492146813.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:33.466Z,1492146813.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:33.484Z,1492146813.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:33.521Z,1492146813.521 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:13:33.521Z,1492146813.521 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:13:33.521Z,1492146813.521 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:13:33.837Z,1492146813.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:33.870Z,1492146813.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:37.543Z,1492146817.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:37.570Z,1492146817.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:37.678Z,1492146817.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:37.753Z,1492146817.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:38.032Z,1492146818.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:38.059Z,1492146818.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:38.434Z,1492146818.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:38.454Z,1492146818.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:38.829Z,1492146818.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:38.849Z,1492146818.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:39.232Z,1492146819.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:39.252Z,1492146819.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:39.629Z,1492146819.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:39.650Z,1492146819.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:40.038Z,1492146820.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:40.055Z,1492146820.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:40.421Z,1492146820.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:40.449Z,1492146820.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:40.821Z,1492146820.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:40.862Z,1492146820.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:41.225Z,1492146821.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:41.256Z,1492146821.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:41.630Z,1492146821.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:41.661Z,1492146821.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:42.030Z,1492146822.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:42.050Z,1492146822.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:42.435Z,1492146822.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:42.455Z,1492146822.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:42.841Z,1492146822.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:42.863Z,1492146822.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:43.249Z,1492146823.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:43.318Z,1492146823.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:43.630Z,1492146823.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:43.662Z,1492146823.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:44.048Z,1492146824.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:44.108Z,1492146824.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:44.421Z,1492146824.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:44.437Z,1492146824.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:44.831Z,1492146824.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:44.982Z,1492146824.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:45.248Z,1492146825.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:45.303Z,1492146825.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:45.684Z,1492146825.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:45.803Z,1492146825.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:46.047Z,1492146826.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:46.134Z,1492146826.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:46.444Z,1492146826.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:46.546Z,1492146826.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:46.831Z,1492146826.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:46.862Z,1492146826.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:47.229Z,1492146827.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:47.246Z,1492146827.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:47.648Z,1492146827.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:47.796Z,1492146827.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:48.034Z,1492146828.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:48.051Z,1492146828.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:48.457Z,1492146828.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:48.492Z,1492146828.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:48.822Z,1492146828.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:48.883Z,1492146828.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:49.229Z,1492146829.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:49.244Z,1492146829.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:49.622Z,1492146829.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:49.642Z,1492146829.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:50.049Z,1492146830.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:50.084Z,1492146830.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:50.423Z,1492146830.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:50.462Z,1492146830.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:50.826Z,1492146830.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:50.866Z,1492146830.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:51.231Z,1492146831.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:51.260Z,1492146831.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:51.630Z,1492146831.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:51.756Z,1492146831.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:52.023Z,1492146832.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:52.056Z,1492146832.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:52.421Z,1492146832.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:52.454Z,1492146832.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:52.829Z,1492146832.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:52.859Z,1492146832.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:52.866Z,1492146832.866 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:52.866Z,1492146832.866 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:13:52.866Z,1492146832.866 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:13:52.880Z,1492146832.880 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:13:53.229Z,1492146833.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:53.263Z,1492146833.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:53.360Z,1492146833.360 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:13:53.360Z,1492146833.360 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:13:53.633Z,1492146833.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:53.672Z,1492146833.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:53.680Z,1492146833.680 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:13:53.680Z,1492146833.680 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:13:53.680Z,1492146833.680 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:13:54.024Z,1492146834.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:54.058Z,1492146834.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:54.426Z,1492146834.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:54.464Z,1492146834.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:54.823Z,1492146834.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:54.858Z,1492146834.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:55.226Z,1492146835.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:55.250Z,1492146835.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:55.621Z,1492146835.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:55.654Z,1492146835.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:56.029Z,1492146836.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:56.066Z,1492146836.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:56.425Z,1492146836.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:56.458Z,1492146836.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:56.821Z,1492146836.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:56.859Z,1492146836.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:57.229Z,1492146837.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:57.256Z,1492146837.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:57.629Z,1492146837.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:57.650Z,1492146837.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:58.029Z,1492146838.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:58.098Z,1492146838.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:58.443Z,1492146838.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:58.459Z,1492146838.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:58.836Z,1492146838.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:58.888Z,1492146838.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:59.235Z,1492146839.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:59.251Z,1492146839.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:13:59.664Z,1492146839.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:13:59.761Z,1492146839.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:00.025Z,1492146840.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:00.071Z,1492146840.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:00.425Z,1492146840.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:00.465Z,1492146840.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:00.825Z,1492146840.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:00.862Z,1492146840.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:01.221Z,1492146841.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:01.259Z,1492146841.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:01.683Z,1492146841.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:01.722Z,1492146841.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:02.038Z,1492146842.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:02.073Z,1492146842.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:02.433Z,1492146842.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:02.471Z,1492146842.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:02.829Z,1492146842.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:02.845Z,1492146842.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:03.227Z,1492146843.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:03.243Z,1492146843.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:03.627Z,1492146843.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:03.654Z,1492146843.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:04.027Z,1492146844.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:04.049Z,1492146844.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:04.426Z,1492146844.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:04.454Z,1492146844.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:04.821Z,1492146844.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:04.858Z,1492146844.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:05.219Z,1492146845.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:05.258Z,1492146845.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:05.627Z,1492146845.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:05.643Z,1492146845.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:06.027Z,1492146846.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:06.055Z,1492146846.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:06.426Z,1492146846.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:06.447Z,1492146846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:06.836Z,1492146846.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:06.885Z,1492146846.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:07.243Z,1492146847.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:07.351Z,1492146847.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:07.618Z,1492146847.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:07.635Z,1492146847.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:08.021Z,1492146848.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:08.058Z,1492146848.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:08.426Z,1492146848.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:08.442Z,1492146848.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:08.829Z,1492146848.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:08.863Z,1492146848.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:09.231Z,1492146849.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:09.331Z,1492146849.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:09.621Z,1492146849.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:09.648Z,1492146849.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:10.043Z,1492146850.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:10.060Z,1492146850.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:10.421Z,1492146850.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:10.465Z,1492146850.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:10.832Z,1492146850.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:10.858Z,1492146850.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:11.247Z,1492146851.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:11.264Z,1492146851.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:11.632Z,1492146851.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:11.694Z,1492146851.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:12.032Z,1492146852.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:12.178Z,1492146852.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:12.443Z,1492146852.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:12.544Z,1492146852.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:12.839Z,1492146852.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:12.904Z,1492146852.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:13.237Z,1492146853.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:13.266Z,1492146853.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:13.689Z,1492146853.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:13.755Z,1492146853.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:14.021Z,1492146854.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:14.086Z,1492146854.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:14.427Z,1492146854.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:14.443Z,1492146854.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:14.820Z,1492146854.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:14.836Z,1492146854.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:15.241Z,1492146855.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:15.267Z,1492146855.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:15.672Z,1492146855.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:15.705Z,1492146855.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:16.021Z,1492146856.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:16.054Z,1492146856.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:16.421Z,1492146856.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:16.455Z,1492146856.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:16.833Z,1492146856.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:16.848Z,1492146856.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:17.221Z,1492146857.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:17.317Z,1492146857.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:17.618Z,1492146857.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:17.634Z,1492146857.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:18.029Z,1492146858.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:18.066Z,1492146858.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:18.423Z,1492146858.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:18.439Z,1492146858.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:18.829Z,1492146858.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:18.845Z,1492146858.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:19.228Z,1492146859.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:19.341Z,1492146859.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:19.632Z,1492146859.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:19.668Z,1492146859.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:20.032Z,1492146860.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:20.069Z,1492146860.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:20.433Z,1492146860.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:20.470Z,1492146860.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:20.829Z,1492146860.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:20.845Z,1492146860.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:21.229Z,1492146861.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:21.334Z,1492146861.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:21.631Z,1492146861.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:21.647Z,1492146861.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:22.029Z,1492146862.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:22.045Z,1492146862.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:22.429Z,1492146862.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:22.445Z,1492146862.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:22.833Z,1492146862.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:22.849Z,1492146862.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:23.255Z,1492146863.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:23.382Z,1492146863.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:23.621Z,1492146863.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:23.664Z,1492146863.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:24.030Z,1492146864.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:24.046Z,1492146864.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:24.429Z,1492146864.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:24.450Z,1492146864.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:24.826Z,1492146864.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:24.846Z,1492146864.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:25.237Z,1492146865.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:25.253Z,1492146865.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:25.628Z,1492146865.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:25.637Z,1492146865.637 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T05:14:25.637Z,1492146865.637 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:14:25.637Z,1492146865.637 [BPC1](ERROR): Data Fault
2017-04-14T05:14:25.658Z,1492146865.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:25.707Z,1492146865.707 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:14:26.026Z,1492146866.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:26.062Z,1492146866.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:26.423Z,1492146866.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:26.493Z,1492146866.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:26.825Z,1492146866.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:26.852Z,1492146866.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:26.872Z,1492146866.872 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:14:26.872Z,1492146866.872 [BPC1] No Fault, FailCount= 1
2017-04-14T05:14:27.226Z,1492146867.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:27.294Z,1492146867.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:27.669Z,1492146867.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:27.729Z,1492146867.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:28.025Z,1492146868.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:28.057Z,1492146868.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:28.421Z,1492146868.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:28.436Z,1492146868.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:28.826Z,1492146868.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:28.843Z,1492146868.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:29.221Z,1492146869.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:29.237Z,1492146869.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:29.683Z,1492146869.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:29.704Z,1492146869.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:30.026Z,1492146870.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:30.047Z,1492146870.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:30.429Z,1492146870.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:30.445Z,1492146870.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:30.828Z,1492146870.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:30.850Z,1492146870.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:31.259Z,1492146871.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:31.342Z,1492146871.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:31.618Z,1492146871.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:31.658Z,1492146871.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:32.021Z,1492146872.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:32.052Z,1492146872.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:32.425Z,1492146872.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:32.458Z,1492146872.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:32.821Z,1492146872.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:32.850Z,1492146872.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:33.258Z,1492146873.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:33.335Z,1492146873.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:33.637Z,1492146873.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:33.653Z,1492146873.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:34.029Z,1492146874.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:34.050Z,1492146874.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:39.215Z,1492146879.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:39.241Z,1492146879.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:39.381Z,1492146879.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:39.462Z,1492146879.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:39.777Z,1492146879.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:39.819Z,1492146879.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:40.173Z,1492146880.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:40.251Z,1492146880.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:40.573Z,1492146880.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:40.589Z,1492146880.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:40.969Z,1492146880.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:41.033Z,1492146881.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:41.384Z,1492146881.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:41.399Z,1492146881.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:41.797Z,1492146881.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:41.858Z,1492146881.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:42.169Z,1492146882.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:42.201Z,1492146882.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:42.569Z,1492146882.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:42.603Z,1492146882.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:42.983Z,1492146882.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:42.998Z,1492146882.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:43.384Z,1492146883.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:43.408Z,1492146883.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:43.770Z,1492146883.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:43.797Z,1492146883.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:44.169Z,1492146884.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:44.205Z,1492146884.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:44.573Z,1492146884.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:44.600Z,1492146884.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:44.997Z,1492146884.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:45.025Z,1492146885.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:45.369Z,1492146885.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:45.401Z,1492146885.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:45.773Z,1492146885.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:45.806Z,1492146885.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:46.169Z,1492146886.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:46.205Z,1492146886.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:46.567Z,1492146886.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:46.582Z,1492146886.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:46.979Z,1492146886.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:47.010Z,1492146887.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:47.369Z,1492146887.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:47.384Z,1492146887.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:47.778Z,1492146887.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:47.795Z,1492146887.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:48.177Z,1492146888.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:48.198Z,1492146888.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:48.578Z,1492146888.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:48.594Z,1492146888.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:48.976Z,1492146888.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:48.993Z,1492146888.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:49.378Z,1492146889.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:49.398Z,1492146889.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:49.782Z,1492146889.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:49.801Z,1492146889.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:50.185Z,1492146890.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:50.201Z,1492146890.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:50.576Z,1492146890.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:50.604Z,1492146890.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:50.969Z,1492146890.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:51.002Z,1492146891.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:51.369Z,1492146891.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:51.396Z,1492146891.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:51.785Z,1492146891.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:51.802Z,1492146891.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:52.169Z,1492146892.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:52.205Z,1492146892.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:52.573Z,1492146892.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:52.600Z,1492146892.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:52.990Z,1492146892.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:53.006Z,1492146893.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:53.369Z,1492146893.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:53.401Z,1492146893.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:53.773Z,1492146893.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:53.826Z,1492146893.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:54.173Z,1492146894.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:54.233Z,1492146894.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:54.573Z,1492146894.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:54.614Z,1492146894.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:54.977Z,1492146894.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:55.009Z,1492146895.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:55.373Z,1492146895.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:55.434Z,1492146895.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:55.789Z,1492146895.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:55.818Z,1492146895.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:56.166Z,1492146896.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:56.218Z,1492146896.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:56.580Z,1492146896.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:56.639Z,1492146896.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:56.972Z,1492146896.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:57.006Z,1492146897.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:57.381Z,1492146897.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:57.397Z,1492146897.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:57.790Z,1492146897.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:57.810Z,1492146897.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:58.186Z,1492146898.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:58.207Z,1492146898.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:58.571Z,1492146898.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:58.588Z,1492146898.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:58.973Z,1492146898.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:59.003Z,1492146899.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:59.378Z,1492146899.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:59.394Z,1492146899.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:14:59.782Z,1492146899.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:14:59.834Z,1492146899.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:00.208Z,1492146900.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:00.241Z,1492146900.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:00.570Z,1492146900.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:00.601Z,1492146900.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:00.983Z,1492146900.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:00.998Z,1492146900.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:01.369Z,1492146901.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:01.406Z,1492146901.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:01.769Z,1492146901.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:01.807Z,1492146901.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:02.166Z,1492146902.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:02.202Z,1492146902.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:02.573Z,1492146902.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:02.600Z,1492146902.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:02.969Z,1492146902.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:03.008Z,1492146903.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:03.392Z,1492146903.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:03.426Z,1492146903.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:03.779Z,1492146903.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:03.815Z,1492146903.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:04.181Z,1492146904.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:04.207Z,1492146904.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:04.569Z,1492146904.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:04.610Z,1492146904.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:04.971Z,1492146904.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:05.024Z,1492146905.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:05.384Z,1492146905.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:05.417Z,1492146905.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:05.778Z,1492146905.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:05.794Z,1492146905.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:06.181Z,1492146906.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:06.196Z,1492146906.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:06.577Z,1492146906.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:06.592Z,1492146906.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:06.975Z,1492146906.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:06.996Z,1492146906.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:07.378Z,1492146907.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:07.398Z,1492146907.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:07.785Z,1492146907.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:07.801Z,1492146907.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:08.172Z,1492146908.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:08.200Z,1492146908.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:08.500Z,1492146908.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:08.569Z,1492146908.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:08.614Z,1492146908.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:08.969Z,1492146908.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:09.036Z,1492146909.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:09.296Z,1492146909.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:09.385Z,1492146909.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:09.406Z,1492146909.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:09.769Z,1492146909.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:09.803Z,1492146909.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:10.173Z,1492146910.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:10.222Z,1492146910.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:10.563Z,1492146910.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:10.587Z,1492146910.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:10.975Z,1492146910.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:11.031Z,1492146911.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:11.375Z,1492146911.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:11.427Z,1492146911.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:11.780Z,1492146911.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:11.834Z,1492146911.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:12.180Z,1492146912.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:12.239Z,1492146912.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:12.574Z,1492146912.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:12.611Z,1492146912.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:12.970Z,1492146912.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:13.017Z,1492146913.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:13.377Z,1492146913.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:13.419Z,1492146913.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:13.773Z,1492146913.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:13.810Z,1492146913.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:14.169Z,1492146914.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:14.185Z,1492146914.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:14.577Z,1492146914.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:14.617Z,1492146914.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:14.969Z,1492146914.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:14.990Z,1492146914.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:15.373Z,1492146915.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:15.388Z,1492146915.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:15.781Z,1492146915.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:15.816Z,1492146915.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:16.175Z,1492146916.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:16.190Z,1492146916.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:16.575Z,1492146916.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:16.591Z,1492146916.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:17.005Z,1492146917.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:17.034Z,1492146917.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:17.377Z,1492146917.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:17.398Z,1492146917.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:17.782Z,1492146917.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:17.827Z,1492146917.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:18.175Z,1492146918.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:18.190Z,1492146918.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:18.585Z,1492146918.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:18.610Z,1492146918.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:19.018Z,1492146919.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:19.073Z,1492146919.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:19.385Z,1492146919.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:19.401Z,1492146919.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:19.776Z,1492146919.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:19.809Z,1492146919.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:20.171Z,1492146920.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:20.211Z,1492146920.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:20.575Z,1492146920.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:20.615Z,1492146920.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:20.977Z,1492146920.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:21.018Z,1492146921.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:21.385Z,1492146921.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:21.416Z,1492146921.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:21.775Z,1492146921.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:21.791Z,1492146921.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:22.175Z,1492146922.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:22.191Z,1492146922.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:22.575Z,1492146922.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:22.591Z,1492146922.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:22.977Z,1492146922.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:23.018Z,1492146923.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:23.371Z,1492146923.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:23.422Z,1492146923.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:23.774Z,1492146923.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:23.790Z,1492146923.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:24.174Z,1492146924.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:24.229Z,1492146924.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:24.577Z,1492146924.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:24.598Z,1492146924.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:24.975Z,1492146924.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:25.034Z,1492146925.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:25.377Z,1492146925.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:25.426Z,1492146925.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:25.772Z,1492146925.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:25.806Z,1492146925.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:26.183Z,1492146926.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:26.199Z,1492146926.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:26.569Z,1492146926.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:26.595Z,1492146926.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:26.982Z,1492146926.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:27.010Z,1492146927.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:27.369Z,1492146927.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:27.396Z,1492146927.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:27.785Z,1492146927.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:27.801Z,1492146927.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:28.212Z,1492146928.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:28.242Z,1492146928.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:28.569Z,1492146928.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:28.597Z,1492146928.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:28.971Z,1492146928.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:29.064Z,1492146929.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:29.422Z,1492146929.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:29.467Z,1492146929.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:29.804Z,1492146929.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:29.869Z,1492146929.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:30.179Z,1492146930.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:30.211Z,1492146930.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:30.636Z,1492146930.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:30.714Z,1492146930.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:31.003Z,1492146931.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:31.097Z,1492146931.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:31.452Z,1492146931.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:31.553Z,1492146931.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:31.828Z,1492146931.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:31.884Z,1492146931.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:32.248Z,1492146932.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:32.306Z,1492146932.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:32.602Z,1492146932.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:32.623Z,1492146932.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:33.014Z,1492146933.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:33.071Z,1492146933.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:33.454Z,1492146933.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:33.555Z,1492146933.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:33.808Z,1492146933.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:33.868Z,1492146933.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:34.204Z,1492146934.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:34.249Z,1492146934.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:38.152Z,1492146938.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:38.242Z,1492146938.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:38.349Z,1492146938.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:38.375Z,1492146938.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:38.720Z,1492146938.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:38.738Z,1492146938.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:39.125Z,1492146939.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:39.186Z,1492146939.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:39.560Z,1492146939.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:39.587Z,1492146939.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:39.925Z,1492146939.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:39.967Z,1492146939.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:40.320Z,1492146940.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:40.378Z,1492146940.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:40.719Z,1492146940.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:40.734Z,1492146940.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:41.132Z,1492146941.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:41.225Z,1492146941.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:41.522Z,1492146941.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:41.542Z,1492146941.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:41.936Z,1492146941.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:41.969Z,1492146941.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:42.309Z,1492146942.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:42.342Z,1492146942.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:42.735Z,1492146942.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:42.830Z,1492146942.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:43.147Z,1492146943.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:43.283Z,1492146943.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:43.511Z,1492146943.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:43.538Z,1492146943.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:43.928Z,1492146943.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:43.944Z,1492146943.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:44.393Z,1492146944.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:44.500Z,1492146944.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:44.709Z,1492146944.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:44.848Z,1492146944.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:45.142Z,1492146945.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:45.260Z,1492146945.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:45.521Z,1492146945.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:45.546Z,1492146945.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:45.915Z,1492146945.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:45.931Z,1492146945.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:46.322Z,1492146946.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:46.347Z,1492146946.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:46.712Z,1492146946.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:46.751Z,1492146946.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:47.220Z,1492146947.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:47.277Z,1492146947.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:47.537Z,1492146947.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:47.586Z,1492146947.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:47.921Z,1492146947.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:47.976Z,1492146947.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:48.311Z,1492146948.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:48.380Z,1492146948.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:48.747Z,1492146948.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:48.800Z,1492146948.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:49.118Z,1492146949.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:49.209Z,1492146949.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:49.509Z,1492146949.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:49.552Z,1492146949.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:49.919Z,1492146949.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:49.949Z,1492146949.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:50.328Z,1492146950.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:50.345Z,1492146950.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:50.725Z,1492146950.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:50.743Z,1492146950.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:51.124Z,1492146951.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:51.140Z,1492146951.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:51.562Z,1492146951.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:51.633Z,1492146951.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:51.937Z,1492146951.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:51.988Z,1492146951.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:52.314Z,1492146952.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:52.378Z,1492146952.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:52.719Z,1492146952.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:52.775Z,1492146952.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:53.114Z,1492146953.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:53.130Z,1492146953.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:53.554Z,1492146953.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:53.613Z,1492146953.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:53.926Z,1492146953.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:53.979Z,1492146953.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:54.317Z,1492146954.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:54.333Z,1492146954.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:54.718Z,1492146954.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:54.776Z,1492146954.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:55.175Z,1492146955.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:55.235Z,1492146955.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:55.507Z,1492146955.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:55.535Z,1492146955.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:55.909Z,1492146955.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:55.946Z,1492146955.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:56.321Z,1492146956.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:56.356Z,1492146956.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:56.717Z,1492146956.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:56.732Z,1492146956.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:57.187Z,1492146957.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:57.232Z,1492146957.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:57.526Z,1492146957.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:57.542Z,1492146957.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:57.909Z,1492146957.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:57.944Z,1492146957.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:58.309Z,1492146958.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:58.346Z,1492146958.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:58.717Z,1492146958.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:58.750Z,1492146958.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:59.179Z,1492146959.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:59.221Z,1492146959.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:59.503Z,1492146959.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:59.519Z,1492146959.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:15:59.913Z,1492146959.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:15:59.950Z,1492146959.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:00.309Z,1492146960.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:00.352Z,1492146960.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:00.713Z,1492146960.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:00.745Z,1492146960.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:01.163Z,1492146961.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:01.197Z,1492146961.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:01.523Z,1492146961.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:01.572Z,1492146961.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:01.917Z,1492146961.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:01.942Z,1492146961.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:02.317Z,1492146962.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:02.338Z,1492146962.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:02.721Z,1492146962.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:02.741Z,1492146962.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:03.116Z,1492146963.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:03.210Z,1492146963.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:03.515Z,1492146963.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:03.540Z,1492146963.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:03.911Z,1492146963.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:03.974Z,1492146963.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:04.311Z,1492146964.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:04.344Z,1492146964.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:04.709Z,1492146964.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:04.765Z,1492146964.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:05.149Z,1492146965.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:05.164Z,1492146965.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:05.515Z,1492146965.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:05.571Z,1492146965.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:05.919Z,1492146965.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:05.935Z,1492146965.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:06.309Z,1492146966.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:06.342Z,1492146966.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:06.725Z,1492146966.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:06.742Z,1492146966.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:07.109Z,1492146967.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:07.162Z,1492146967.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:07.510Z,1492146967.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:07.562Z,1492146967.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:07.918Z,1492146967.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:07.938Z,1492146967.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:08.322Z,1492146968.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:08.338Z,1492146968.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:08.742Z,1492146968.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:08.793Z,1492146968.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:09.161Z,1492146969.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:09.219Z,1492146969.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:09.517Z,1492146969.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:09.591Z,1492146969.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:09.920Z,1492146969.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:09.985Z,1492146969.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:10.345Z,1492146970.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:10.366Z,1492146970.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:10.715Z,1492146970.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:10.730Z,1492146970.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:11.174Z,1492146971.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:11.215Z,1492146971.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:11.511Z,1492146971.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:11.561Z,1492146971.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:11.929Z,1492146971.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:11.960Z,1492146971.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:12.314Z,1492146972.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:12.349Z,1492146972.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:12.714Z,1492146972.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:12.730Z,1492146972.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:13.163Z,1492146973.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:13.214Z,1492146973.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:13.514Z,1492146973.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:13.533Z,1492146973.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:13.917Z,1492146973.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:13.934Z,1492146973.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:14.322Z,1492146974.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:14.342Z,1492146974.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:14.717Z,1492146974.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:14.734Z,1492146974.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:15.189Z,1492146975.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:15.254Z,1492146975.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:15.509Z,1492146975.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:15.558Z,1492146975.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:15.921Z,1492146975.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:15.938Z,1492146975.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:16.309Z,1492146976.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:16.325Z,1492146976.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:16.721Z,1492146976.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:16.757Z,1492146976.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:17.134Z,1492146977.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:17.252Z,1492146977.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:17.525Z,1492146977.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:17.576Z,1492146977.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:17.576Z,1492146977.576 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:16:17.576Z,1492146977.576 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:16:17.582Z,1492146977.582 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:17.582Z,1492146977.582 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:16:17.583Z,1492146977.583 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:16:17.598Z,1492146977.598 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:16:17.598Z,1492146977.598 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:16:17.932Z,1492146977.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:18.087Z,1492146978.087 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:16:18.087Z,1492146978.087 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:16:18.088Z,1492146978.088 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:16:18.088Z,1492146978.088 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:16:18.311Z,1492146978.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:18.329Z,1492146978.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:16:18.329Z,1492146978.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:16:18.329Z,1492146978.329 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:16:18.391Z,1492146978.391 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:16:18.392Z,1492146978.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:16:18.392Z,1492146978.392 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:16:18.720Z,1492146978.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:18.772Z,1492146978.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:19.123Z,1492146979.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:19.168Z,1492146979.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:19.528Z,1492146979.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:19.567Z,1492146979.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:19.911Z,1492146979.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:19.993Z,1492146979.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:20.330Z,1492146980.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:20.346Z,1492146980.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:20.732Z,1492146980.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:20.775Z,1492146980.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:21.117Z,1492146981.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:21.137Z,1492146981.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:21.542Z,1492146981.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:21.641Z,1492146981.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:21.910Z,1492146981.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:21.980Z,1492146981.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:22.309Z,1492146982.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:22.366Z,1492146982.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:22.734Z,1492146982.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:22.766Z,1492146982.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:23.251Z,1492146983.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:23.349Z,1492146983.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:23.589Z,1492146983.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:23.654Z,1492146983.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:23.938Z,1492146983.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:23.990Z,1492146983.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:24.312Z,1492146984.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:24.399Z,1492146984.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:24.719Z,1492146984.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:24.735Z,1492146984.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:25.164Z,1492146985.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:25.211Z,1492146985.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:25.525Z,1492146985.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:25.577Z,1492146985.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:25.930Z,1492146985.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:25.976Z,1492146985.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:26.324Z,1492146986.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:26.341Z,1492146986.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:26.723Z,1492146986.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:26.779Z,1492146986.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:27.174Z,1492146987.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:27.200Z,1492146987.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:27.524Z,1492146987.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:27.618Z,1492146987.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:27.944Z,1492146987.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:27.992Z,1492146987.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:28.319Z,1492146988.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:28.372Z,1492146988.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:28.720Z,1492146988.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:28.749Z,1492146988.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:29.142Z,1492146989.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:29.201Z,1492146989.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:29.506Z,1492146989.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:29.540Z,1492146989.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:29.916Z,1492146989.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:29.957Z,1492146989.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:30.309Z,1492146990.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:30.325Z,1492146990.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:30.718Z,1492146990.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:30.734Z,1492146990.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:31.186Z,1492146991.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:31.230Z,1492146991.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:31.515Z,1492146991.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:31.561Z,1492146991.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:31.914Z,1492146991.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:31.953Z,1492146991.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:32.318Z,1492146992.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:32.361Z,1492146992.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:32.718Z,1492146992.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:32.767Z,1492146992.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:33.124Z,1492146993.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:33.165Z,1492146993.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:33.524Z,1492146993.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:33.579Z,1492146993.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:33.927Z,1492146993.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:33.966Z,1492146993.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:34.322Z,1492146994.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:34.338Z,1492146994.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:38.174Z,1492146998.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:38.277Z,1492146998.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:38.384Z,1492146998.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:38.404Z,1492146998.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:38.791Z,1492146998.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:38.840Z,1492146998.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:39.228Z,1492146999.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:39.261Z,1492146999.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:39.580Z,1492146999.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:39.637Z,1492146999.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:39.983Z,1492146999.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:40.040Z,1492147000.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:40.373Z,1492147000.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:40.406Z,1492147000.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:40.790Z,1492147000.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:40.850Z,1492147000.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:41.168Z,1492147001.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:41.211Z,1492147001.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:41.594Z,1492147001.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:41.612Z,1492147001.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:41.968Z,1492147001.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:42.006Z,1492147002.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:42.391Z,1492147002.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:42.422Z,1492147002.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:42.806Z,1492147002.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:42.885Z,1492147002.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:43.173Z,1492147003.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:43.191Z,1492147003.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:43.584Z,1492147003.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:43.612Z,1492147003.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:43.988Z,1492147003.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:44.031Z,1492147004.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:44.373Z,1492147004.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:44.402Z,1492147004.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:44.792Z,1492147004.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:44.811Z,1492147004.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:45.205Z,1492147005.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:45.320Z,1492147005.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:45.570Z,1492147005.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:45.616Z,1492147005.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:45.967Z,1492147005.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:46.025Z,1492147006.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:46.377Z,1492147006.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:46.415Z,1492147006.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:46.781Z,1492147006.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:46.810Z,1492147006.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:47.176Z,1492147007.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:47.226Z,1492147007.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:47.584Z,1492147007.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:47.621Z,1492147007.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:47.975Z,1492147007.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:47.995Z,1492147007.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:48.382Z,1492147008.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:48.400Z,1492147008.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:48.784Z,1492147008.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:48.804Z,1492147008.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:49.186Z,1492147009.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:49.206Z,1492147009.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:49.567Z,1492147009.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:49.603Z,1492147009.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:49.969Z,1492147009.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:50.006Z,1492147010.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:50.366Z,1492147010.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:50.397Z,1492147010.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:50.774Z,1492147010.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:50.803Z,1492147010.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:51.168Z,1492147011.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:51.222Z,1492147011.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:51.568Z,1492147011.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:51.597Z,1492147011.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:51.965Z,1492147011.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:52.004Z,1492147012.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:52.366Z,1492147012.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:52.449Z,1492147012.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:52.779Z,1492147012.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:52.817Z,1492147012.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:53.175Z,1492147013.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:53.226Z,1492147013.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:53.581Z,1492147013.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:53.613Z,1492147013.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:53.972Z,1492147013.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:54.029Z,1492147014.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:54.037Z,1492147014.037 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:54.037Z,1492147014.037 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:16:54.037Z,1492147014.037 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:16:54.073Z,1492147014.073 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:16:54.382Z,1492147014.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:54.438Z,1492147014.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:54.487Z,1492147014.487 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:16:54.487Z,1492147014.487 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:16:54.775Z,1492147014.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:54.793Z,1492147014.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:54.831Z,1492147014.831 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:16:54.832Z,1492147014.832 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:16:54.832Z,1492147014.832 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:16:55.181Z,1492147015.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:55.204Z,1492147015.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:55.584Z,1492147015.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:55.614Z,1492147015.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:55.978Z,1492147015.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:56.009Z,1492147016.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:56.368Z,1492147016.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:56.412Z,1492147016.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:56.779Z,1492147016.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:56.813Z,1492147016.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:57.176Z,1492147017.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:57.194Z,1492147017.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:57.579Z,1492147017.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:57.619Z,1492147017.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:57.974Z,1492147017.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:58.011Z,1492147018.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:58.373Z,1492147018.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:58.393Z,1492147018.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:58.776Z,1492147018.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:58.799Z,1492147018.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:59.176Z,1492147019.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:59.231Z,1492147019.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:59.591Z,1492147019.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:16:59.644Z,1492147019.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:16:59.969Z,1492147019.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:00.011Z,1492147020.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:00.373Z,1492147020.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:00.405Z,1492147020.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:00.775Z,1492147020.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:00.806Z,1492147020.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:01.205Z,1492147021.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:01.247Z,1492147021.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:01.600Z,1492147021.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:01.622Z,1492147021.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:01.977Z,1492147021.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:02.016Z,1492147022.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:02.377Z,1492147022.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:02.423Z,1492147022.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:02.781Z,1492147022.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:02.825Z,1492147022.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:03.175Z,1492147023.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:03.197Z,1492147023.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:03.577Z,1492147023.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:03.604Z,1492147023.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:03.973Z,1492147023.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:04.001Z,1492147024.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:04.384Z,1492147024.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:04.401Z,1492147024.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:04.788Z,1492147024.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:04.805Z,1492147024.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:05.170Z,1492147025.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:05.201Z,1492147025.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:05.569Z,1492147025.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:05.624Z,1492147025.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:05.982Z,1492147025.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:06.014Z,1492147026.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:06.368Z,1492147026.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:06.488Z,1492147026.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:06.777Z,1492147026.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:06.811Z,1492147026.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:07.181Z,1492147027.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:07.256Z,1492147027.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:07.585Z,1492147027.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:07.621Z,1492147027.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:07.976Z,1492147027.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:08.029Z,1492147028.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:08.375Z,1492147028.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:08.394Z,1492147028.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:08.778Z,1492147028.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:08.845Z,1492147028.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:09.184Z,1492147029.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:09.224Z,1492147029.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:09.577Z,1492147029.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:09.602Z,1492147029.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:09.988Z,1492147029.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:10.008Z,1492147030.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:10.368Z,1492147030.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:10.398Z,1492147030.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:10.770Z,1492147030.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:10.813Z,1492147030.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:11.168Z,1492147031.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:11.220Z,1492147031.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:11.576Z,1492147031.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:11.607Z,1492147031.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:11.975Z,1492147031.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:11.994Z,1492147031.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:12.382Z,1492147032.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:12.469Z,1492147032.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:12.768Z,1492147032.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:12.851Z,1492147032.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:13.176Z,1492147033.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:13.281Z,1492147033.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:13.622Z,1492147033.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:13.698Z,1492147033.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:14.007Z,1492147034.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:14.082Z,1492147034.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:14.375Z,1492147034.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:14.470Z,1492147034.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:14.810Z,1492147034.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:14.883Z,1492147034.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:15.177Z,1492147035.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:15.243Z,1492147035.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:15.569Z,1492147035.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:15.620Z,1492147035.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:15.976Z,1492147035.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:15.993Z,1492147035.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:16.445Z,1492147036.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:16.521Z,1492147036.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:16.770Z,1492147036.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:16.868Z,1492147036.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:17.172Z,1492147037.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:17.224Z,1492147037.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:17.604Z,1492147037.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:17.635Z,1492147037.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:17.977Z,1492147037.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:18.031Z,1492147038.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:18.377Z,1492147038.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:18.397Z,1492147038.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:18.779Z,1492147038.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:18.845Z,1492147038.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:19.177Z,1492147039.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:19.220Z,1492147039.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:19.607Z,1492147039.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:19.641Z,1492147039.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:19.975Z,1492147039.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:19.991Z,1492147039.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:20.374Z,1492147040.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:20.390Z,1492147040.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:20.773Z,1492147040.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:20.858Z,1492147040.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:21.185Z,1492147041.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:21.200Z,1492147041.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:21.586Z,1492147041.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:21.654Z,1492147041.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:21.967Z,1492147041.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:22.031Z,1492147042.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:22.377Z,1492147042.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:22.435Z,1492147042.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:22.780Z,1492147042.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:22.838Z,1492147042.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:23.165Z,1492147043.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:23.192Z,1492147043.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:23.574Z,1492147043.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:23.590Z,1492147043.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:23.979Z,1492147043.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:23.995Z,1492147043.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:24.373Z,1492147044.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:24.390Z,1492147044.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:24.774Z,1492147044.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:24.794Z,1492147044.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:25.176Z,1492147045.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:25.193Z,1492147045.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:25.577Z,1492147045.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:25.603Z,1492147045.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:25.980Z,1492147045.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:26.009Z,1492147046.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:26.373Z,1492147046.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:26.399Z,1492147046.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:26.766Z,1492147046.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:26.799Z,1492147046.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:27.183Z,1492147047.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:27.201Z,1492147047.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:27.567Z,1492147047.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:27.597Z,1492147047.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:27.973Z,1492147047.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:28.003Z,1492147048.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:28.371Z,1492147048.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:28.409Z,1492147048.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:28.775Z,1492147048.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:28.820Z,1492147048.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:29.189Z,1492147049.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:29.231Z,1492147049.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:29.587Z,1492147049.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:29.645Z,1492147049.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:29.976Z,1492147049.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:30.001Z,1492147050.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:30.365Z,1492147050.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:30.407Z,1492147050.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:30.766Z,1492147050.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:30.800Z,1492147050.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:31.167Z,1492147051.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:31.184Z,1492147051.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:31.565Z,1492147051.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:31.586Z,1492147051.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:31.968Z,1492147051.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:32.002Z,1492147052.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:32.380Z,1492147052.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:32.396Z,1492147052.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:32.773Z,1492147052.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:32.806Z,1492147052.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:33.166Z,1492147053.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:33.221Z,1492147053.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:33.574Z,1492147053.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:33.617Z,1492147053.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:33.973Z,1492147053.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:33.991Z,1492147053.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:34.390Z,1492147054.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:34.438Z,1492147054.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:39.033Z,1492147059.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:39.123Z,1492147059.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:39.222Z,1492147059.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:39.256Z,1492147059.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:39.609Z,1492147059.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:39.648Z,1492147059.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:40.006Z,1492147060.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:40.052Z,1492147060.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:40.410Z,1492147060.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:40.451Z,1492147060.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:40.818Z,1492147060.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:40.834Z,1492147060.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:41.212Z,1492147061.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:41.270Z,1492147061.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:41.612Z,1492147061.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:41.629Z,1492147061.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:42.014Z,1492147062.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:42.054Z,1492147062.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:42.415Z,1492147062.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:42.462Z,1492147062.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:42.816Z,1492147062.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:42.838Z,1492147062.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:43.234Z,1492147063.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:43.356Z,1492147063.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:43.626Z,1492147063.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:43.642Z,1492147063.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:44.013Z,1492147064.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:44.048Z,1492147064.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:44.408Z,1492147064.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:44.447Z,1492147064.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:44.850Z,1492147064.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:44.874Z,1492147064.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:45.211Z,1492147065.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:45.230Z,1492147065.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:45.605Z,1492147065.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:45.652Z,1492147065.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:45.999Z,1492147065.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:46.032Z,1492147066.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:46.405Z,1492147066.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:46.442Z,1492147066.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:46.808Z,1492147066.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:46.839Z,1492147066.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:47.202Z,1492147067.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:47.263Z,1492147067.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:47.615Z,1492147067.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:47.667Z,1492147067.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:48.026Z,1492147068.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:48.091Z,1492147068.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:48.398Z,1492147068.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:48.431Z,1492147068.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:48.812Z,1492147068.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:48.839Z,1492147068.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:49.211Z,1492147069.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:49.249Z,1492147069.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:49.607Z,1492147069.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:49.644Z,1492147069.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:50.007Z,1492147070.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:50.052Z,1492147070.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:50.410Z,1492147070.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:50.426Z,1492147070.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:50.811Z,1492147070.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:50.827Z,1492147070.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:51.213Z,1492147071.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:51.249Z,1492147071.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:51.622Z,1492147071.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:51.638Z,1492147071.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:52.007Z,1492147072.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:52.041Z,1492147072.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:52.425Z,1492147072.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:52.476Z,1492147072.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:52.810Z,1492147072.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:52.845Z,1492147072.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:53.209Z,1492147073.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:53.275Z,1492147073.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:53.610Z,1492147073.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:53.652Z,1492147073.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:54.010Z,1492147074.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:54.046Z,1492147074.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:54.406Z,1492147074.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:54.472Z,1492147074.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:54.804Z,1492147074.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:54.867Z,1492147074.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:55.206Z,1492147075.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:55.223Z,1492147075.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:55.610Z,1492147075.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:55.655Z,1492147075.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:56.012Z,1492147076.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:56.071Z,1492147076.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:56.401Z,1492147076.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:56.459Z,1492147076.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:56.805Z,1492147076.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:56.876Z,1492147076.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:57.223Z,1492147077.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:57.305Z,1492147077.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:57.614Z,1492147077.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:57.656Z,1492147077.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:58.010Z,1492147078.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:58.027Z,1492147078.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:58.410Z,1492147078.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:58.427Z,1492147078.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:58.810Z,1492147078.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:58.830Z,1492147078.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:59.206Z,1492147079.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:59.222Z,1492147079.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:17:59.601Z,1492147079.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:17:59.637Z,1492147079.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:00.001Z,1492147080.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:00.039Z,1492147080.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:00.398Z,1492147080.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:00.422Z,1492147080.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:00.801Z,1492147080.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:00.840Z,1492147080.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:01.210Z,1492147081.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:01.226Z,1492147081.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:01.606Z,1492147081.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:01.650Z,1492147081.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:02.010Z,1492147082.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:02.025Z,1492147082.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:02.409Z,1492147082.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:02.426Z,1492147082.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:02.813Z,1492147082.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:02.829Z,1492147082.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:03.206Z,1492147083.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:03.243Z,1492147083.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:03.615Z,1492147083.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:03.632Z,1492147083.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:04.011Z,1492147084.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:04.040Z,1492147084.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:04.401Z,1492147084.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:04.427Z,1492147084.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:04.817Z,1492147084.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:04.838Z,1492147084.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:05.218Z,1492147085.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:05.242Z,1492147085.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:05.618Z,1492147085.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:05.645Z,1492147085.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:06.003Z,1492147086.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:06.058Z,1492147086.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:06.409Z,1492147086.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:06.445Z,1492147086.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:06.814Z,1492147086.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:06.845Z,1492147086.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:07.217Z,1492147087.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:07.258Z,1492147087.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:07.635Z,1492147087.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:07.667Z,1492147087.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:08.010Z,1492147088.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:08.027Z,1492147088.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:08.418Z,1492147088.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:08.434Z,1492147088.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:08.816Z,1492147088.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:08.885Z,1492147088.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:09.203Z,1492147089.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:09.286Z,1492147089.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:09.601Z,1492147089.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:09.622Z,1492147089.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:10.019Z,1492147090.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:10.074Z,1492147090.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:10.412Z,1492147090.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:10.454Z,1492147090.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:10.809Z,1492147090.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:10.876Z,1492147090.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:11.209Z,1492147091.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:11.347Z,1492147091.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:11.609Z,1492147091.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:11.647Z,1492147091.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:12.012Z,1492147092.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:12.029Z,1492147092.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:12.410Z,1492147092.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:12.429Z,1492147092.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:12.812Z,1492147092.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:12.832Z,1492147092.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:13.269Z,1492147093.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:13.330Z,1492147093.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:13.613Z,1492147093.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:13.645Z,1492147093.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:14.006Z,1492147094.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:14.022Z,1492147094.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:14.417Z,1492147094.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:14.458Z,1492147094.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:14.812Z,1492147094.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:14.828Z,1492147094.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:15.209Z,1492147095.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:15.229Z,1492147095.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:15.620Z,1492147095.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:15.642Z,1492147095.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:16.011Z,1492147096.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:16.028Z,1492147096.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:16.408Z,1492147096.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:16.436Z,1492147096.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:16.824Z,1492147096.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:16.841Z,1492147096.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:17.209Z,1492147097.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:17.233Z,1492147097.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:17.610Z,1492147097.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:17.640Z,1492147097.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:18.015Z,1492147098.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:18.043Z,1492147098.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:18.408Z,1492147098.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:18.440Z,1492147098.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:18.811Z,1492147098.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:18.848Z,1492147098.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:19.209Z,1492147099.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:19.236Z,1492147099.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:19.601Z,1492147099.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:19.639Z,1492147099.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:20.009Z,1492147100.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:20.042Z,1492147100.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:20.402Z,1492147100.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:20.443Z,1492147100.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:20.804Z,1492147100.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:20.850Z,1492147100.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:21.223Z,1492147101.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:21.246Z,1492147101.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:21.617Z,1492147101.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:21.634Z,1492147101.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:22.025Z,1492147102.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:22.041Z,1492147102.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:22.404Z,1492147102.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:22.458Z,1492147102.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:22.821Z,1492147102.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:22.876Z,1492147102.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:23.201Z,1492147103.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:23.242Z,1492147103.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:23.655Z,1492147103.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:23.799Z,1492147103.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:24.120Z,1492147104.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:24.200Z,1492147104.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:24.416Z,1492147104.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:24.483Z,1492147104.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:24.819Z,1492147104.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:24.863Z,1492147104.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:25.259Z,1492147105.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:25.397Z,1492147105.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:25.610Z,1492147105.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:25.666Z,1492147105.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:26.003Z,1492147106.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:26.055Z,1492147106.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:26.401Z,1492147106.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:26.439Z,1492147106.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:26.847Z,1492147106.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:26.890Z,1492147106.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:27.277Z,1492147107.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:27.343Z,1492147107.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:27.646Z,1492147107.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:27.719Z,1492147107.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:28.030Z,1492147108.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:28.074Z,1492147108.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:28.416Z,1492147108.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:28.468Z,1492147108.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:28.803Z,1492147108.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:28.840Z,1492147108.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:29.201Z,1492147109.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:29.217Z,1492147109.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:29.611Z,1492147109.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:29.629Z,1492147109.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:30.004Z,1492147110.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:30.021Z,1492147110.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:30.408Z,1492147110.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:30.431Z,1492147110.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:30.811Z,1492147110.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:30.829Z,1492147110.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:31.210Z,1492147111.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:31.251Z,1492147111.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:31.613Z,1492147111.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:31.649Z,1492147111.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:32.009Z,1492147112.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:32.026Z,1492147112.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:32.412Z,1492147112.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:32.429Z,1492147112.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:32.818Z,1492147112.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:32.838Z,1492147112.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:33.216Z,1492147113.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:33.250Z,1492147113.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:33.609Z,1492147113.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:33.650Z,1492147113.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:34.015Z,1492147114.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:34.056Z,1492147114.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:34.090Z,1492147114.090 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:18:34.091Z,1492147114.091 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:18:34.091Z,1492147114.091 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:18:34.091Z,1492147114.091 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:18:34.410Z,1492147114.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:34.430Z,1492147114.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:34.462Z,1492147114.462 [Default:CheckIn:D] Stopped
2017-04-14T05:18:34.462Z,1492147114.462 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:18:38.152Z,1492147118.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:38.957Z,1492147118.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:40.851Z,1492147120.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:40.984Z,1492147120.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:41.006Z,1492147121.006 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 112.485718 min 
2017-04-14T05:18:41.007Z,1492147121.007 [Default:CheckIn:E] Stopped
2017-04-14T05:18:41.007Z,1492147121.007 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:18:41.007Z,1492147121.007 [Default:CheckIn] Stopped
2017-04-14T05:18:41.007Z,1492147121.007 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:18:41.009Z,1492147121.009 [Default:CheckIn](INFO): Running loop #17
2017-04-14T05:18:41.009Z,1492147121.009 [Default:CheckIn] Running Loop=17
2017-04-14T05:18:41.009Z,1492147121.009 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:18:41.009Z,1492147121.009 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:18:41.076Z,1492147121.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:41.117Z,1492147121.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:41.452Z,1492147121.452 [NAL9602](INFO): Powering up
2017-04-14T05:18:41.475Z,1492147121.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:41.530Z,1492147121.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:41.966Z,1492147121.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:42.023Z,1492147122.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:42.281Z,1492147122.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:42.330Z,1492147122.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:42.677Z,1492147122.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:42.743Z,1492147122.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:43.069Z,1492147123.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:43.116Z,1492147123.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:43.486Z,1492147123.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:43.504Z,1492147123.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:43.890Z,1492147123.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:43.913Z,1492147123.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:44.274Z,1492147124.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:44.306Z,1492147124.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:44.670Z,1492147124.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:44.720Z,1492147124.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:45.073Z,1492147125.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:45.129Z,1492147125.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:45.474Z,1492147125.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:45.506Z,1492147125.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:45.870Z,1492147125.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:45.907Z,1492147125.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:46.274Z,1492147126.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:46.303Z,1492147126.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:46.668Z,1492147126.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:46.705Z,1492147126.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:47.069Z,1492147127.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:47.102Z,1492147127.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:47.477Z,1492147127.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:47.517Z,1492147127.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:47.884Z,1492147127.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:47.903Z,1492147127.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:48.303Z,1492147128.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:48.345Z,1492147128.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:48.678Z,1492147128.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:48.701Z,1492147128.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:49.070Z,1492147129.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:49.109Z,1492147129.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:49.470Z,1492147129.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:49.507Z,1492147129.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:49.874Z,1492147129.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:49.915Z,1492147129.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:50.276Z,1492147130.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:50.332Z,1492147130.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:50.682Z,1492147130.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:50.727Z,1492147130.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:51.075Z,1492147131.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:51.134Z,1492147131.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:51.492Z,1492147131.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:51.511Z,1492147131.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:51.890Z,1492147131.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:51.936Z,1492147131.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:52.261Z,1492147132.261 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:18:52.277Z,1492147132.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:52.318Z,1492147132.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:52.670Z,1492147132.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:52.716Z,1492147132.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:53.100Z,1492147133.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:53.117Z,1492147133.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:53.492Z,1492147133.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:53.523Z,1492147133.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:53.894Z,1492147133.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:53.974Z,1492147133.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:54.279Z,1492147134.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:54.304Z,1492147134.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:54.672Z,1492147134.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:54.774Z,1492147134.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:55.074Z,1492147135.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:55.120Z,1492147135.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:55.486Z,1492147135.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:55.536Z,1492147135.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:55.887Z,1492147135.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:55.984Z,1492147135.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:56.294Z,1492147136.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:56.362Z,1492147136.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:56.675Z,1492147136.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:56.740Z,1492147136.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:57.079Z,1492147137.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:57.136Z,1492147137.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:57.480Z,1492147137.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:57.567Z,1492147137.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:57.877Z,1492147137.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:57.902Z,1492147137.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:58.282Z,1492147138.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:58.332Z,1492147138.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:58.725Z,1492147138.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:58.798Z,1492147138.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:59.133Z,1492147139.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:59.193Z,1492147139.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:59.493Z,1492147139.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:59.526Z,1492147139.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:18:59.917Z,1492147139.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:18:59.956Z,1492147139.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:00.272Z,1492147140.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:00.312Z,1492147140.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:00.753Z,1492147140.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:00.782Z,1492147140.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:01.178Z,1492147141.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:01.272Z,1492147141.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:01.512Z,1492147141.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:01.588Z,1492147141.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:01.873Z,1492147141.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:01.936Z,1492147141.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:02.283Z,1492147142.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:02.344Z,1492147142.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:02.677Z,1492147142.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:02.694Z,1492147142.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:03.086Z,1492147143.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:03.149Z,1492147143.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:03.491Z,1492147143.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:03.518Z,1492147143.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:03.912Z,1492147143.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:03.955Z,1492147143.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:04.308Z,1492147144.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:04.345Z,1492147144.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:04.669Z,1492147144.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:04.710Z,1492147144.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:05.093Z,1492147145.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:05.119Z,1492147145.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:05.501Z,1492147145.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:05.525Z,1492147145.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:05.874Z,1492147145.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:05.909Z,1492147145.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:06.281Z,1492147146.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:06.301Z,1492147146.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:06.678Z,1492147146.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:06.713Z,1492147146.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:07.069Z,1492147147.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:07.111Z,1492147147.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:07.489Z,1492147147.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:07.508Z,1492147147.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:07.869Z,1492147147.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:07.910Z,1492147147.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:08.274Z,1492147148.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:08.290Z,1492147148.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:08.712Z,1492147148.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:08.728Z,1492147148.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:09.077Z,1492147149.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:09.212Z,1492147149.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:09.563Z,1492147149.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:09.607Z,1492147149.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:09.921Z,1492147149.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:09.969Z,1492147149.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:10.275Z,1492147150.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:10.348Z,1492147150.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:10.679Z,1492147150.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:10.747Z,1492147150.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:11.075Z,1492147151.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:11.175Z,1492147151.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:11.501Z,1492147151.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:11.554Z,1492147151.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:11.872Z,1492147151.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:11.931Z,1492147151.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:12.313Z,1492147152.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:12.424Z,1492147152.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:12.672Z,1492147152.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:12.729Z,1492147152.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:13.076Z,1492147153.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:13.124Z,1492147153.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:13.470Z,1492147153.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:13.515Z,1492147153.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:13.891Z,1492147153.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:13.908Z,1492147153.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:14.296Z,1492147154.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:14.338Z,1492147154.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:14.682Z,1492147154.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:14.727Z,1492147154.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:15.090Z,1492147155.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:15.148Z,1492147155.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:15.466Z,1492147155.466 [NAL9602](INFO): SBD MO Status=0, MOMSN=2110, MT Status=0, MTMSN=0
2017-04-14T05:19:15.466Z,1492147155.466 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:19:15.502Z,1492147155.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:15.518Z,1492147155.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:15.883Z,1492147155.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:15.904Z,1492147155.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:16.310Z,1492147156.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:16.360Z,1492147156.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:16.694Z,1492147156.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:16.713Z,1492147156.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:17.086Z,1492147157.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:17.118Z,1492147157.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:17.485Z,1492147157.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:17.519Z,1492147157.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:17.883Z,1492147157.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:17.920Z,1492147157.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:18.282Z,1492147158.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:18.320Z,1492147158.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:18.688Z,1492147158.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:18.742Z,1492147158.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:18.742Z,1492147158.742 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:19:18.742Z,1492147158.742 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:19:18.761Z,1492147158.761 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:18.761Z,1492147158.761 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:19:18.762Z,1492147158.761 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:19:18.814Z,1492147158.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:19:18.814Z,1492147158.815 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:19:19.093Z,1492147159.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:19.189Z,1492147159.189 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:19:19.189Z,1492147159.189 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:19:19.190Z,1492147159.190 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:19:19.190Z,1492147159.190 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:19:19.499Z,1492147159.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:19.532Z,1492147159.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:19:19.532Z,1492147159.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:19:19.532Z,1492147159.532 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:19:19.541Z,1492147159.541 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:19:19.542Z,1492147159.542 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:19:19.543Z,1492147159.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:19:19.905Z,1492147159.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:19.922Z,1492147159.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:20.271Z,1492147160.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:20.307Z,1492147160.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:20.674Z,1492147160.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:20.705Z,1492147160.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:21.078Z,1492147161.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:21.106Z,1492147161.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:21.477Z,1492147161.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:21.513Z,1492147161.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:21.883Z,1492147161.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:21.916Z,1492147161.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:22.292Z,1492147162.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:22.324Z,1492147162.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:22.696Z,1492147162.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:22.750Z,1492147162.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:23.093Z,1492147163.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:23.222Z,1492147163.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:23.495Z,1492147163.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:23.511Z,1492147163.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:23.869Z,1492147163.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:23.907Z,1492147163.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:24.269Z,1492147164.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:24.322Z,1492147164.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:24.674Z,1492147164.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:24.726Z,1492147164.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:25.078Z,1492147165.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:25.131Z,1492147165.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:25.492Z,1492147165.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:25.546Z,1492147165.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:25.892Z,1492147165.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:25.925Z,1492147165.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:26.284Z,1492147166.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:26.308Z,1492147166.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:26.683Z,1492147166.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:26.699Z,1492147166.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:27.080Z,1492147167.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:27.131Z,1492147167.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:27.489Z,1492147167.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:27.516Z,1492147167.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:27.878Z,1492147167.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:27.955Z,1492147167.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:28.287Z,1492147168.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:28.310Z,1492147168.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:28.696Z,1492147168.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:28.727Z,1492147168.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:29.114Z,1492147169.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:29.135Z,1492147169.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:29.477Z,1492147169.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:29.503Z,1492147169.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:29.885Z,1492147169.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:29.901Z,1492147169.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:30.279Z,1492147170.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:30.378Z,1492147170.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:30.712Z,1492147170.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:30.822Z,1492147170.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:31.070Z,1492147171.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:31.103Z,1492147171.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:31.489Z,1492147171.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:31.515Z,1492147171.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:31.921Z,1492147171.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:31.962Z,1492147171.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:32.325Z,1492147172.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:32.345Z,1492147172.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:32.696Z,1492147172.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:32.745Z,1492147172.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:33.156Z,1492147173.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:33.236Z,1492147173.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:33.535Z,1492147173.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:33.584Z,1492147173.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:33.930Z,1492147173.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:34.007Z,1492147174.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:34.347Z,1492147174.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:34.396Z,1492147174.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:34.771Z,1492147174.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:34.826Z,1492147174.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:39.094Z,1492147179.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:39.174Z,1492147179.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:39.284Z,1492147179.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:39.306Z,1492147179.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:39.666Z,1492147179.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:39.694Z,1492147179.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:40.076Z,1492147180.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:40.131Z,1492147180.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:40.480Z,1492147180.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:40.499Z,1492147180.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:40.858Z,1492147180.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:40.933Z,1492147180.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:41.266Z,1492147181.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:41.333Z,1492147181.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:41.650Z,1492147181.651 [NAL9602](INFO): GPS fix at 20170414T051951: (36.802305, -121.787144)
2017-04-14T05:19:41.689Z,1492147181.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:41.747Z,1492147181.747 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:19:41.747Z,1492147181.747 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:19:42.093Z,1492147182.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:42.117Z,1492147182.117 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:42.117Z,1492147182.117 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:19:42.117Z,1492147182.117 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:19:42.150Z,1492147182.150 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:42.150Z,1492147182.150 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:19:42.150Z,1492147182.150 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:19:42.190Z,1492147182.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:19:42.190Z,1492147182.190 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:19:42.497Z,1492147182.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:42.571Z,1492147182.571 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:19:42.572Z,1492147182.572 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:19:42.572Z,1492147182.572 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:19:42.572Z,1492147182.572 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:19:42.897Z,1492147182.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:42.985Z,1492147182.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:19:42.986Z,1492147182.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:19:42.986Z,1492147182.986 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:19:42.995Z,1492147182.995 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:19:42.996Z,1492147182.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:19:42.996Z,1492147182.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:19:43.304Z,1492147183.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:43.353Z,1492147183.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:47.711Z,1492147187.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:47.751Z,1492147187.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:47.836Z,1492147187.836 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0072.lzma
2017-04-14T05:19:47.867Z,1492147187.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:47.906Z,1492147187.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:48.224Z,1492147188.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:48.264Z,1492147188.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:48.599Z,1492147188.599 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0072.lzma.bak
2017-04-14T05:19:48.599Z,1492147188.599 [DataOverHttps](INFO): SBD MOMSN=4885204
2017-04-14T05:19:48.621Z,1492147188.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:48.661Z,1492147188.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:49.029Z,1492147189.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:49.045Z,1492147189.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:49.407Z,1492147189.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:49.493Z,1492147189.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:53.487Z,1492147193.487 [NAL9602](INFO): Powering down
2017-04-14T05:19:53.507Z,1492147193.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:53.630Z,1492147193.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:53.744Z,1492147193.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:53.769Z,1492147193.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:54.131Z,1492147194.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:54.175Z,1492147194.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:54.535Z,1492147194.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:54.551Z,1492147194.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:54.999Z,1492147195.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:55.058Z,1492147195.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:55.080Z,1492147195.080 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:55.080Z,1492147195.080 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:19:55.080Z,1492147195.080 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:19:55.094Z,1492147195.094 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:19:55.332Z,1492147195.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:19:55.388Z,1492147195.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:19:55.408Z,1492147195.408 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:19:55.408Z,1492147195.408 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:19:59.968Z,1492147199.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:00.007Z,1492147200.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:00.014Z,1492147200.014 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:20:00.015Z,1492147200.015 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:20:00.015Z,1492147200.016 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:20:00.085Z,1492147200.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:00.107Z,1492147200.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:00.456Z,1492147200.456 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0073.lzma
2017-04-14T05:20:00.492Z,1492147200.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:00.525Z,1492147200.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:00.884Z,1492147200.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:00.955Z,1492147200.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:01.262Z,1492147201.262 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0073.lzma.bak
2017-04-14T05:20:01.262Z,1492147201.263 [DataOverHttps](INFO): SBD MOMSN=4885207
2017-04-14T05:20:01.305Z,1492147201.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:01.334Z,1492147201.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:01.703Z,1492147201.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:01.726Z,1492147201.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:01.748Z,1492147201.748 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:20:01.748Z,1492147201.749 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:20:01.749Z,1492147201.749 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:20:02.081Z,1492147202.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:02.098Z,1492147202.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:06.282Z,1492147206.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:06.298Z,1492147206.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:06.417Z,1492147206.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:06.479Z,1492147206.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:06.808Z,1492147206.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:06.851Z,1492147206.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:07.210Z,1492147207.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:07.309Z,1492147207.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:07.611Z,1492147207.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:07.629Z,1492147207.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:07.987Z,1492147207.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:08.027Z,1492147208.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:08.386Z,1492147208.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:08.452Z,1492147208.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:08.793Z,1492147208.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:08.844Z,1492147208.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:09.218Z,1492147209.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:09.271Z,1492147209.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:09.598Z,1492147209.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:09.653Z,1492147209.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:09.993Z,1492147209.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:10.022Z,1492147210.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:10.385Z,1492147210.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:10.424Z,1492147210.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:10.787Z,1492147210.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:10.887Z,1492147210.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:11.211Z,1492147211.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:11.270Z,1492147211.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:11.585Z,1492147211.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:11.637Z,1492147211.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:11.987Z,1492147211.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:12.037Z,1492147212.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:12.396Z,1492147212.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:12.434Z,1492147212.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:12.790Z,1492147212.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:12.874Z,1492147212.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:13.193Z,1492147213.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:13.237Z,1492147213.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:13.605Z,1492147213.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:13.640Z,1492147213.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:13.000Z,1492147214.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:14.050Z,1492147214.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:14.395Z,1492147214.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:14.428Z,1492147214.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:14.863Z,1492147214.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:14.908Z,1492147214.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:15.189Z,1492147215.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:15.239Z,1492147215.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:15.594Z,1492147215.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:15.628Z,1492147215.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:15.986Z,1492147215.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:16.051Z,1492147216.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:16.388Z,1492147216.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:16.412Z,1492147216.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:16.806Z,1492147216.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:16.846Z,1492147216.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:17.200Z,1492147217.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:17.235Z,1492147217.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:17.586Z,1492147217.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:17.630Z,1492147217.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:18.010Z,1492147218.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:18.026Z,1492147218.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:18.409Z,1492147218.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:18.434Z,1492147218.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:18.797Z,1492147218.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:18.829Z,1492147218.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:19.236Z,1492147219.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:19.278Z,1492147219.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:19.622Z,1492147219.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:19.643Z,1492147219.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:19.998Z,1492147219.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:20.029Z,1492147220.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:20.398Z,1492147220.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:20.479Z,1492147220.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:20.796Z,1492147220.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:20.862Z,1492147220.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:21.212Z,1492147221.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:21.243Z,1492147221.243 [PNI_TCM](ERROR): CRC does not match. Expected:0x29690 got:0x10102
2017-04-14T05:20:21.293Z,1492147221.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:21.601Z,1492147221.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:21.651Z,1492147221.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:22.005Z,1492147222.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:22.090Z,1492147222.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:22.396Z,1492147222.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:22.423Z,1492147222.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:22.846Z,1492147222.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:22.928Z,1492147222.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:23.202Z,1492147223.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:23.218Z,1492147223.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:23.593Z,1492147223.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:23.676Z,1492147223.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:23.989Z,1492147223.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:24.069Z,1492147224.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:24.393Z,1492147224.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:24.425Z,1492147224.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:24.804Z,1492147224.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:24.839Z,1492147224.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:25.190Z,1492147225.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:25.206Z,1492147225.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:25.636Z,1492147225.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:25.657Z,1492147225.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:25.996Z,1492147225.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:26.026Z,1492147226.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:26.398Z,1492147226.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:26.413Z,1492147226.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:26.797Z,1492147226.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:26.813Z,1492147226.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:27.185Z,1492147227.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:27.222Z,1492147227.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:27.594Z,1492147227.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:27.610Z,1492147227.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:27.997Z,1492147227.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:28.057Z,1492147228.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:28.394Z,1492147228.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:28.410Z,1492147228.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:28.814Z,1492147228.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:28.865Z,1492147228.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:29.199Z,1492147229.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:29.241Z,1492147229.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:29.594Z,1492147229.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:29.650Z,1492147229.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:29.989Z,1492147229.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:30.027Z,1492147230.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:30.385Z,1492147230.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:30.424Z,1492147230.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:30.790Z,1492147230.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:30.807Z,1492147230.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:31.191Z,1492147231.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:31.207Z,1492147231.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:31.591Z,1492147231.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:31.616Z,1492147231.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:31.995Z,1492147231.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:32.054Z,1492147232.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:32.389Z,1492147232.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:32.430Z,1492147232.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:32.819Z,1492147232.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:32.904Z,1492147232.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:33.192Z,1492147233.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:33.239Z,1492147233.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:33.606Z,1492147233.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:33.638Z,1492147233.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:34.014Z,1492147234.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:34.054Z,1492147234.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:34.401Z,1492147234.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:34.500Z,1492147234.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:34.802Z,1492147234.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:34.818Z,1492147234.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:35.207Z,1492147235.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:35.238Z,1492147235.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:35.598Z,1492147235.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:35.625Z,1492147235.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:35.997Z,1492147235.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:36.045Z,1492147236.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:36.396Z,1492147236.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:36.435Z,1492147236.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:36.797Z,1492147236.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:36.842Z,1492147236.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:37.205Z,1492147237.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:37.240Z,1492147237.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:37.595Z,1492147237.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:37.612Z,1492147237.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:37.998Z,1492147237.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:38.014Z,1492147238.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:38.386Z,1492147238.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:38.428Z,1492147238.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:38.792Z,1492147238.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:38.822Z,1492147238.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:39.190Z,1492147239.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:39.200Z,1492147239.200 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:20:39.200Z,1492147239.200 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:20:39.200Z,1492147239.200 [BPC1](ERROR): Communications Fault
2017-04-14T05:20:39.225Z,1492147239.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:39.261Z,1492147239.261 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:20:39.596Z,1492147239.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:39.613Z,1492147239.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:39.999Z,1492147239.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:40.040Z,1492147240.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:40.414Z,1492147240.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:40.457Z,1492147240.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:40.516Z,1492147240.516 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:20:40.516Z,1492147240.516 [BPC1] No Fault, FailCount= 1
2017-04-14T05:20:40.790Z,1492147240.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:40.934Z,1492147240.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:41.190Z,1492147241.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:41.250Z,1492147241.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:41.603Z,1492147241.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:41.632Z,1492147241.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:41.997Z,1492147241.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:42.033Z,1492147242.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:42.397Z,1492147242.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:42.437Z,1492147242.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:42.799Z,1492147242.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:42.848Z,1492147242.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:43.205Z,1492147243.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:43.235Z,1492147243.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:43.604Z,1492147243.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:43.620Z,1492147243.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:43.993Z,1492147243.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:44.021Z,1492147244.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:44.390Z,1492147244.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:44.426Z,1492147244.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:44.800Z,1492147244.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:44.823Z,1492147244.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:45.201Z,1492147245.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:45.218Z,1492147245.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:45.612Z,1492147245.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:45.658Z,1492147245.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:45.995Z,1492147245.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:46.041Z,1492147246.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:46.390Z,1492147246.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:46.444Z,1492147246.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:46.789Z,1492147246.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:46.838Z,1492147246.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:47.208Z,1492147247.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:47.249Z,1492147247.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:47.603Z,1492147247.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:47.653Z,1492147247.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:47.000Z,1492147248.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:48.019Z,1492147248.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:48.403Z,1492147248.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:48.422Z,1492147248.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:48.786Z,1492147248.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:48.834Z,1492147248.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:49.219Z,1492147249.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:49.260Z,1492147249.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:49.636Z,1492147249.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:49.684Z,1492147249.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:49.998Z,1492147249.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:50.041Z,1492147250.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:50.396Z,1492147250.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:50.472Z,1492147250.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:50.787Z,1492147250.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:50.831Z,1492147250.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:51.248Z,1492147251.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:51.320Z,1492147251.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:51.606Z,1492147251.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:51.634Z,1492147251.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:51.993Z,1492147251.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:52.051Z,1492147252.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:52.395Z,1492147252.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:52.416Z,1492147252.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:52.795Z,1492147252.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:52.827Z,1492147252.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:53.192Z,1492147253.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:53.263Z,1492147253.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:53.588Z,1492147253.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:53.618Z,1492147253.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:53.986Z,1492147253.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:54.031Z,1492147254.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:54.385Z,1492147254.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:54.428Z,1492147254.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:54.789Z,1492147254.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:54.878Z,1492147254.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:55.194Z,1492147255.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:55.244Z,1492147255.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:55.594Z,1492147255.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:55.610Z,1492147255.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:55.995Z,1492147255.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:56.019Z,1492147256.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:56.400Z,1492147256.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:56.459Z,1492147256.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:56.795Z,1492147256.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:56.877Z,1492147256.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:57.201Z,1492147257.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:57.220Z,1492147257.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:57.606Z,1492147257.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:57.622Z,1492147257.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:57.988Z,1492147257.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:58.024Z,1492147258.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:58.388Z,1492147258.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:58.430Z,1492147258.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:58.794Z,1492147258.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:58.810Z,1492147258.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:59.206Z,1492147259.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:59.256Z,1492147259.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:59.605Z,1492147259.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:20:59.623Z,1492147259.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:20:59.993Z,1492147259.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:00.019Z,1492147260.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:00.424Z,1492147260.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:00.470Z,1492147260.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:00.794Z,1492147260.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:00.821Z,1492147260.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:01.222Z,1492147261.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:01.239Z,1492147261.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:01.604Z,1492147261.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:01.630Z,1492147261.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:01.997Z,1492147261.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:02.032Z,1492147262.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:02.401Z,1492147262.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:02.443Z,1492147262.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:06.503Z,1492147266.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:06.590Z,1492147266.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:06.776Z,1492147266.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:06.796Z,1492147266.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:07.162Z,1492147267.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:07.218Z,1492147267.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:07.566Z,1492147267.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:07.582Z,1492147267.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:07.959Z,1492147267.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:08.020Z,1492147268.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:08.380Z,1492147268.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:08.461Z,1492147268.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:08.762Z,1492147268.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:08.778Z,1492147268.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:09.189Z,1492147269.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:09.226Z,1492147269.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:09.555Z,1492147269.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:09.572Z,1492147269.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:09.967Z,1492147269.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:09.999Z,1492147270.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:10.376Z,1492147270.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:10.458Z,1492147270.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:10.761Z,1492147270.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:10.817Z,1492147270.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:11.174Z,1492147271.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:11.222Z,1492147271.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:11.610Z,1492147271.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:11.659Z,1492147271.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:12.002Z,1492147272.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:12.053Z,1492147272.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:12.362Z,1492147272.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:12.414Z,1492147272.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:12.756Z,1492147272.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:12.800Z,1492147272.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:13.155Z,1492147273.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:13.193Z,1492147273.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:13.557Z,1492147273.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:13.588Z,1492147273.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:13.963Z,1492147273.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:14.004Z,1492147274.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:14.351Z,1492147274.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:14.367Z,1492147274.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:14.762Z,1492147274.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:14.778Z,1492147274.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:15.163Z,1492147275.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:15.180Z,1492147275.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:15.562Z,1492147275.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:15.582Z,1492147275.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:15.962Z,1492147275.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:15.986Z,1492147275.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:16.366Z,1492147276.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:16.384Z,1492147276.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:16.753Z,1492147276.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:16.790Z,1492147276.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:17.175Z,1492147277.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:17.191Z,1492147277.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:17.555Z,1492147277.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:17.596Z,1492147277.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:17.953Z,1492147277.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:17.988Z,1492147277.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:18.373Z,1492147278.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:18.391Z,1492147278.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:18.759Z,1492147278.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:18.834Z,1492147278.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:19.162Z,1492147279.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:19.222Z,1492147279.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:19.559Z,1492147279.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:19.583Z,1492147279.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:19.975Z,1492147279.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:20.036Z,1492147280.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:20.357Z,1492147280.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:20.399Z,1492147280.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:20.756Z,1492147280.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:20.820Z,1492147280.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:21.161Z,1492147281.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:21.219Z,1492147281.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:21.575Z,1492147281.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:21.631Z,1492147281.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:21.974Z,1492147281.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:22.004Z,1492147282.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:22.365Z,1492147282.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:22.413Z,1492147282.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:22.759Z,1492147282.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:22.808Z,1492147282.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:23.174Z,1492147283.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:23.192Z,1492147283.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:23.601Z,1492147283.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:23.644Z,1492147283.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:23.958Z,1492147283.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:23.988Z,1492147283.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:24.350Z,1492147284.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:24.388Z,1492147284.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:24.753Z,1492147284.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:24.779Z,1492147284.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:25.173Z,1492147285.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:25.195Z,1492147285.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:25.553Z,1492147285.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:25.569Z,1492147285.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:25.957Z,1492147285.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:25.973Z,1492147285.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:26.359Z,1492147286.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:26.375Z,1492147286.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:26.761Z,1492147286.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:26.806Z,1492147286.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:27.167Z,1492147287.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:27.184Z,1492147287.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:27.564Z,1492147287.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:27.592Z,1492147287.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:27.963Z,1492147287.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:27.992Z,1492147287.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:28.353Z,1492147288.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:28.390Z,1492147288.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:28.783Z,1492147288.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:28.801Z,1492147288.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:29.164Z,1492147289.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:29.189Z,1492147289.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:29.566Z,1492147289.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:29.591Z,1492147289.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:29.965Z,1492147289.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:29.980Z,1492147289.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:30.360Z,1492147290.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:30.380Z,1492147290.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:30.761Z,1492147290.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:30.782Z,1492147290.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:31.170Z,1492147291.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:31.186Z,1492147291.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:31.562Z,1492147291.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:31.578Z,1492147291.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:31.963Z,1492147291.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:32.042Z,1492147292.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:32.355Z,1492147292.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:32.449Z,1492147292.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:32.755Z,1492147292.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:32.803Z,1492147292.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:33.159Z,1492147293.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:33.223Z,1492147293.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:33.561Z,1492147293.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:33.586Z,1492147293.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:33.951Z,1492147293.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:34.035Z,1492147294.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:34.357Z,1492147294.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:34.410Z,1492147294.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:34.753Z,1492147294.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:34.791Z,1492147294.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:35.155Z,1492147295.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:35.179Z,1492147295.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:35.561Z,1492147295.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:35.591Z,1492147295.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:35.961Z,1492147295.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:35.991Z,1492147295.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:36.357Z,1492147296.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:36.381Z,1492147296.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:36.760Z,1492147296.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:36.788Z,1492147296.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:37.161Z,1492147297.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:37.201Z,1492147297.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:37.558Z,1492147297.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:37.574Z,1492147297.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:37.961Z,1492147297.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:37.976Z,1492147297.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:38.354Z,1492147298.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:38.369Z,1492147298.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:38.758Z,1492147298.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:38.778Z,1492147298.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:39.161Z,1492147299.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:39.182Z,1492147299.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:39.559Z,1492147299.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:39.586Z,1492147299.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:39.964Z,1492147299.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:40.020Z,1492147300.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:40.363Z,1492147300.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:40.414Z,1492147300.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:40.782Z,1492147300.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:40.825Z,1492147300.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:41.158Z,1492147301.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:41.174Z,1492147301.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:41.564Z,1492147301.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:41.580Z,1492147301.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:41.964Z,1492147301.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:42.019Z,1492147302.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:42.363Z,1492147302.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:42.388Z,1492147302.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:42.753Z,1492147302.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:42.779Z,1492147302.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:43.153Z,1492147303.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:43.191Z,1492147303.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:43.557Z,1492147303.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:43.584Z,1492147303.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:43.953Z,1492147303.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:43.988Z,1492147303.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:44.370Z,1492147304.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:44.386Z,1492147304.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:44.757Z,1492147304.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:44.838Z,1492147304.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:45.163Z,1492147305.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:45.192Z,1492147305.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:45.561Z,1492147305.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:45.592Z,1492147305.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:45.959Z,1492147305.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:46.006Z,1492147306.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:46.362Z,1492147306.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:46.391Z,1492147306.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:46.780Z,1492147306.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:46.843Z,1492147306.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:47.153Z,1492147307.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:47.218Z,1492147307.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:47.558Z,1492147307.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:47.596Z,1492147307.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:47.954Z,1492147307.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:47.970Z,1492147307.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:48.363Z,1492147308.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:48.380Z,1492147308.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:48.775Z,1492147308.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:48.811Z,1492147308.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:49.155Z,1492147309.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:49.186Z,1492147309.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:49.555Z,1492147309.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:49.596Z,1492147309.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:49.957Z,1492147309.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:49.990Z,1492147309.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:50.358Z,1492147310.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:50.394Z,1492147310.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:50.758Z,1492147310.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:50.790Z,1492147310.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:51.153Z,1492147311.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:51.190Z,1492147311.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:51.561Z,1492147311.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:51.607Z,1492147311.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:51.953Z,1492147311.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:51.987Z,1492147311.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:52.364Z,1492147312.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:52.391Z,1492147312.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:52.812Z,1492147312.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:52.849Z,1492147312.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:53.165Z,1492147313.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:53.197Z,1492147313.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:53.561Z,1492147313.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:53.616Z,1492147313.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:53.964Z,1492147313.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:53.993Z,1492147313.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:54.357Z,1492147314.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:54.384Z,1492147314.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:54.753Z,1492147314.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:54.786Z,1492147314.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:55.154Z,1492147315.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:55.202Z,1492147315.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:55.565Z,1492147315.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:55.593Z,1492147315.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:55.967Z,1492147315.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:55.999Z,1492147315.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:56.360Z,1492147316.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:56.376Z,1492147316.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:56.763Z,1492147316.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:56.779Z,1492147316.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:57.164Z,1492147317.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:57.182Z,1492147317.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:57.565Z,1492147317.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:57.625Z,1492147317.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:57.966Z,1492147317.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:58.046Z,1492147318.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:58.355Z,1492147318.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:58.395Z,1492147318.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:58.760Z,1492147318.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:58.821Z,1492147318.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:59.162Z,1492147319.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:59.214Z,1492147319.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:59.562Z,1492147319.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:21:59.603Z,1492147319.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:21:59.964Z,1492147319.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:00.022Z,1492147320.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:00.361Z,1492147320.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:00.418Z,1492147320.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:00.775Z,1492147320.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:00.803Z,1492147320.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:01.170Z,1492147321.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:01.212Z,1492147321.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:01.568Z,1492147321.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:01.605Z,1492147321.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:01.982Z,1492147321.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:02.014Z,1492147322.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:02.355Z,1492147322.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:02.406Z,1492147322.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:02.753Z,1492147322.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:02.798Z,1492147322.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:06.268Z,1492147326.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:06.294Z,1492147326.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:06.405Z,1492147326.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:06.472Z,1492147326.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:06.777Z,1492147326.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:06.800Z,1492147326.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:07.158Z,1492147327.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:07.193Z,1492147327.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:07.556Z,1492147327.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:07.572Z,1492147327.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:07.959Z,1492147327.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:08.021Z,1492147328.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:08.358Z,1492147328.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:08.374Z,1492147328.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:08.771Z,1492147328.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:08.790Z,1492147328.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:09.149Z,1492147329.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:09.175Z,1492147329.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:09.549Z,1492147329.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:09.594Z,1492147329.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:09.953Z,1492147329.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:09.989Z,1492147329.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:10.124Z,1492147330.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:10.349Z,1492147330.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:10.384Z,1492147330.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:10.749Z,1492147330.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:10.793Z,1492147330.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:10.920Z,1492147330.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:11.149Z,1492147331.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:11.206Z,1492147331.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:11.328Z,1492147331.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:11.549Z,1492147331.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:11.629Z,1492147331.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:11.949Z,1492147331.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:11.991Z,1492147331.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:12.124Z,1492147332.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:12.353Z,1492147332.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:12.385Z,1492147332.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:12.754Z,1492147332.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:12.802Z,1492147332.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:12.920Z,1492147332.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:13.149Z,1492147333.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:13.170Z,1492147333.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:13.324Z,1492147333.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:13.550Z,1492147333.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:13.595Z,1492147333.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:13.957Z,1492147333.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:14.007Z,1492147334.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:14.361Z,1492147334.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:14.396Z,1492147334.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:14.758Z,1492147334.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:14.774Z,1492147334.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:15.158Z,1492147335.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:15.217Z,1492147335.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:15.558Z,1492147335.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:15.574Z,1492147335.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:15.963Z,1492147335.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:15.979Z,1492147335.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:16.022Z,1492147336.022 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:22:16.357Z,1492147336.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:16.372Z,1492147336.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:16.757Z,1492147336.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:16.774Z,1492147336.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:17.161Z,1492147337.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:17.185Z,1492147337.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:17.551Z,1492147337.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:17.620Z,1492147337.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:17.949Z,1492147337.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:17.982Z,1492147337.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:18.349Z,1492147338.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:18.381Z,1492147338.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:18.749Z,1492147338.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:18.812Z,1492147338.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:19.158Z,1492147339.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:19.173Z,1492147339.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:19.552Z,1492147339.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:19.568Z,1492147339.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:19.951Z,1492147339.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:19.979Z,1492147339.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:20.351Z,1492147340.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:20.403Z,1492147340.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:20.808Z,1492147340.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:20.844Z,1492147340.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:21.150Z,1492147341.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:21.170Z,1492147341.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:21.549Z,1492147341.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:21.570Z,1492147341.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:21.953Z,1492147341.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:21.994Z,1492147341.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:22.356Z,1492147342.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:22.372Z,1492147342.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:22.758Z,1492147342.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:22.796Z,1492147342.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:23.155Z,1492147343.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:23.187Z,1492147343.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:23.565Z,1492147343.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:23.580Z,1492147343.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:23.949Z,1492147343.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:23.975Z,1492147343.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:24.370Z,1492147344.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:24.449Z,1492147344.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:24.749Z,1492147344.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:24.770Z,1492147344.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:25.157Z,1492147345.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:25.202Z,1492147345.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:25.556Z,1492147345.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:25.580Z,1492147345.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:25.961Z,1492147345.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:26.010Z,1492147346.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:26.349Z,1492147346.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:26.399Z,1492147346.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:26.749Z,1492147346.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:26.777Z,1492147346.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:27.149Z,1492147347.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:27.189Z,1492147347.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:27.550Z,1492147347.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:27.582Z,1492147347.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:27.949Z,1492147347.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:27.980Z,1492147347.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:28.349Z,1492147348.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:28.379Z,1492147348.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:28.749Z,1492147348.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:28.782Z,1492147348.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:29.157Z,1492147349.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:29.190Z,1492147349.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:29.549Z,1492147349.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:29.577Z,1492147349.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:29.949Z,1492147349.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:29.977Z,1492147349.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:30.357Z,1492147350.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:30.389Z,1492147350.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:30.749Z,1492147350.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:30.793Z,1492147350.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:31.149Z,1492147351.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:31.164Z,1492147351.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:31.565Z,1492147351.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:31.590Z,1492147351.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:31.949Z,1492147351.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:31.970Z,1492147351.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:32.346Z,1492147352.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:32.362Z,1492147352.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:32.755Z,1492147352.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:32.796Z,1492147352.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:33.155Z,1492147353.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:33.194Z,1492147353.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:33.558Z,1492147353.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:33.574Z,1492147353.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:33.956Z,1492147353.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:33.972Z,1492147353.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:34.354Z,1492147354.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:34.380Z,1492147354.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:34.760Z,1492147354.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:34.775Z,1492147354.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:35.164Z,1492147355.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:35.180Z,1492147355.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:35.559Z,1492147355.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:35.575Z,1492147355.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:35.963Z,1492147355.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:35.979Z,1492147355.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:36.358Z,1492147356.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:36.374Z,1492147356.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:36.758Z,1492147356.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:36.852Z,1492147356.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:37.157Z,1492147357.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:37.211Z,1492147357.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:37.547Z,1492147357.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:37.563Z,1492147357.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:37.957Z,1492147357.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:37.998Z,1492147357.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:38.357Z,1492147358.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:38.396Z,1492147358.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:38.745Z,1492147358.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:38.804Z,1492147358.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:39.153Z,1492147359.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:39.206Z,1492147359.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:39.557Z,1492147359.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:39.572Z,1492147359.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:39.957Z,1492147359.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:39.973Z,1492147359.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:40.359Z,1492147360.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:40.375Z,1492147360.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:40.758Z,1492147360.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:40.777Z,1492147360.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:41.162Z,1492147361.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:41.180Z,1492147361.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:41.564Z,1492147361.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:41.581Z,1492147361.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:41.946Z,1492147361.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:41.984Z,1492147361.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:42.358Z,1492147362.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:42.378Z,1492147362.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:42.774Z,1492147362.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:42.790Z,1492147362.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:43.149Z,1492147363.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:43.175Z,1492147363.175 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:43.175Z,1492147363.175 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:22:43.175Z,1492147363.175 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:22:43.183Z,1492147363.183 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:43.183Z,1492147363.183 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:22:43.183Z,1492147363.183 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:22:43.198Z,1492147363.197 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:22:43.198Z,1492147363.198 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:22:43.549Z,1492147363.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:43.620Z,1492147363.620 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:22:43.620Z,1492147363.620 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:22:43.620Z,1492147363.620 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:22:43.621Z,1492147363.621 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:22:43.949Z,1492147363.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:44.008Z,1492147364.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:22:44.009Z,1492147364.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:22:44.009Z,1492147364.009 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:22:44.043Z,1492147364.043 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:22:44.044Z,1492147364.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:22:44.044Z,1492147364.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:22:44.354Z,1492147364.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:44.383Z,1492147364.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:44.757Z,1492147364.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:44.773Z,1492147364.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:45.162Z,1492147365.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:45.182Z,1492147365.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:45.557Z,1492147365.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:45.573Z,1492147365.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:45.956Z,1492147365.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:45.984Z,1492147365.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:46.365Z,1492147366.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:46.386Z,1492147366.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:46.757Z,1492147366.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:46.778Z,1492147366.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:47.157Z,1492147367.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:47.173Z,1492147367.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:47.557Z,1492147367.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:47.578Z,1492147367.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:47.949Z,1492147367.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:47.975Z,1492147367.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:48.349Z,1492147368.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:48.382Z,1492147368.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:48.749Z,1492147368.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:48.782Z,1492147368.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:49.149Z,1492147369.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:49.186Z,1492147369.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:49.566Z,1492147369.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:49.582Z,1492147369.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:49.950Z,1492147369.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:50.015Z,1492147370.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:50.343Z,1492147370.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:50.359Z,1492147370.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:50.804Z,1492147370.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:50.906Z,1492147370.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:51.152Z,1492147371.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:51.176Z,1492147371.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:51.557Z,1492147371.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:51.607Z,1492147371.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:51.956Z,1492147371.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:52.017Z,1492147372.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:52.357Z,1492147372.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:52.378Z,1492147372.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:52.759Z,1492147372.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:52.775Z,1492147372.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:53.149Z,1492147373.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:53.182Z,1492147373.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:53.553Z,1492147373.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:53.578Z,1492147373.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:53.953Z,1492147373.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:53.979Z,1492147373.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:54.346Z,1492147374.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:54.370Z,1492147374.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:54.755Z,1492147374.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:54.788Z,1492147374.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:55.149Z,1492147375.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:55.164Z,1492147375.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:55.549Z,1492147375.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:55.566Z,1492147375.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:55.956Z,1492147375.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:55.972Z,1492147375.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:56.350Z,1492147376.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:56.365Z,1492147376.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:56.753Z,1492147376.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:56.769Z,1492147376.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:57.158Z,1492147377.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:57.178Z,1492147377.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:57.559Z,1492147377.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:57.575Z,1492147377.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:57.960Z,1492147377.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:57.976Z,1492147377.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:58.361Z,1492147378.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:58.382Z,1492147378.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:58.765Z,1492147378.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:58.809Z,1492147378.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:59.148Z,1492147379.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:59.164Z,1492147379.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:59.557Z,1492147379.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:59.573Z,1492147379.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:22:59.965Z,1492147379.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:22:59.996Z,1492147379.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:00.358Z,1492147380.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:00.374Z,1492147380.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:00.400Z,1492147380.400 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:00.400Z,1492147380.400 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:23:00.400Z,1492147380.400 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:23:00.423Z,1492147380.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:23:00.761Z,1492147380.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:00.794Z,1492147380.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:00.829Z,1492147380.829 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:23:00.829Z,1492147380.829 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:23:01.153Z,1492147381.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:01.184Z,1492147381.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:01.194Z,1492147381.194 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:23:01.195Z,1492147381.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:23:01.195Z,1492147381.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:23:01.557Z,1492147381.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:01.593Z,1492147381.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:01.957Z,1492147381.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:01.972Z,1492147381.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:02.356Z,1492147382.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:02.374Z,1492147382.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:02.754Z,1492147382.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:02.817Z,1492147382.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:03.161Z,1492147383.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:03.200Z,1492147383.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:03.558Z,1492147383.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:03.574Z,1492147383.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:03.954Z,1492147383.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:03.970Z,1492147383.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:04.353Z,1492147384.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:04.384Z,1492147384.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:07.854Z,1492147387.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:07.863Z,1492147387.863 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:23:07.863Z,1492147387.863 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:23:07.863Z,1492147387.863 [BPC1](ERROR): Communications Fault
2017-04-14T05:23:07.872Z,1492147387.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:07.920Z,1492147387.921 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:23:07.984Z,1492147387.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:08.030Z,1492147388.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:08.363Z,1492147388.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:08.378Z,1492147388.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:08.757Z,1492147388.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:08.784Z,1492147388.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:08.803Z,1492147388.803 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:23:08.803Z,1492147388.803 [BPC1] No Fault, FailCount= 1
2017-04-14T05:23:09.153Z,1492147389.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:09.238Z,1492147389.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:09.561Z,1492147389.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:09.588Z,1492147389.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:09.956Z,1492147389.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:09.984Z,1492147389.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:10.395Z,1492147390.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:10.496Z,1492147390.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:10.755Z,1492147390.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:10.791Z,1492147390.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:11.154Z,1492147391.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:11.194Z,1492147391.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:11.555Z,1492147391.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:11.601Z,1492147391.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:11.953Z,1492147391.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:11.993Z,1492147391.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:12.371Z,1492147392.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:12.474Z,1492147392.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:12.753Z,1492147392.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:12.834Z,1492147392.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:13.169Z,1492147393.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:13.186Z,1492147393.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:13.553Z,1492147393.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:13.586Z,1492147393.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:13.969Z,1492147393.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:13.990Z,1492147393.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:14.357Z,1492147394.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:14.383Z,1492147394.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:14.753Z,1492147394.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:14.785Z,1492147394.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:15.161Z,1492147395.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:15.177Z,1492147395.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:15.561Z,1492147395.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:15.582Z,1492147395.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:15.962Z,1492147395.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:15.978Z,1492147395.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:16.350Z,1492147396.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:16.386Z,1492147396.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:16.753Z,1492147396.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:16.790Z,1492147396.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:17.153Z,1492147397.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:17.186Z,1492147397.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:17.551Z,1492147397.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:17.579Z,1492147397.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:17.957Z,1492147397.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:17.990Z,1492147397.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:18.350Z,1492147398.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:18.367Z,1492147398.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:18.789Z,1492147398.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:18.838Z,1492147398.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:19.159Z,1492147399.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:19.192Z,1492147399.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:19.561Z,1492147399.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:19.577Z,1492147399.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:19.960Z,1492147399.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:19.981Z,1492147399.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:20.369Z,1492147400.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:20.385Z,1492147400.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:20.819Z,1492147400.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:20.855Z,1492147400.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:21.161Z,1492147401.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:21.177Z,1492147401.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:21.562Z,1492147401.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:21.582Z,1492147401.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:21.966Z,1492147401.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:21.981Z,1492147401.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:22.365Z,1492147402.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:22.381Z,1492147402.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:22.753Z,1492147402.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:22.786Z,1492147402.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:23.170Z,1492147403.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:23.194Z,1492147403.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:23.553Z,1492147403.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:23.586Z,1492147403.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:23.957Z,1492147403.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:23.983Z,1492147403.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:24.353Z,1492147404.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:24.378Z,1492147404.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:24.759Z,1492147404.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:24.821Z,1492147404.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:25.161Z,1492147405.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:25.225Z,1492147405.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:25.561Z,1492147405.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:25.576Z,1492147405.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:25.953Z,1492147405.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:26.009Z,1492147406.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:26.361Z,1492147406.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:26.376Z,1492147406.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:26.753Z,1492147406.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:26.802Z,1492147406.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:27.153Z,1492147407.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:27.210Z,1492147407.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:27.551Z,1492147407.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:27.566Z,1492147407.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:27.953Z,1492147407.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:27.981Z,1492147407.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:28.353Z,1492147408.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:28.421Z,1492147408.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:28.758Z,1492147408.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:28.773Z,1492147408.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:29.158Z,1492147409.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:29.182Z,1492147409.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:29.557Z,1492147409.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:29.574Z,1492147409.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:29.962Z,1492147409.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:29.977Z,1492147409.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:30.359Z,1492147410.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:30.374Z,1492147410.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:30.753Z,1492147410.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:30.777Z,1492147410.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:31.161Z,1492147411.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:31.192Z,1492147411.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:31.558Z,1492147411.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:31.589Z,1492147411.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:31.950Z,1492147411.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:31.966Z,1492147411.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:32.361Z,1492147412.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:32.382Z,1492147412.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:32.804Z,1492147412.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:32.830Z,1492147412.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:33.160Z,1492147413.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:33.180Z,1492147413.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:33.573Z,1492147413.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:33.589Z,1492147413.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:33.962Z,1492147413.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:33.977Z,1492147413.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:34.360Z,1492147414.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:34.376Z,1492147414.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:34.794Z,1492147414.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:34.846Z,1492147414.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:35.186Z,1492147415.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:35.241Z,1492147415.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:35.553Z,1492147415.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:35.590Z,1492147415.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:35.955Z,1492147415.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:35.991Z,1492147415.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:36.353Z,1492147416.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:36.450Z,1492147416.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:36.765Z,1492147416.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:36.781Z,1492147416.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:37.162Z,1492147417.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:37.182Z,1492147417.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:37.556Z,1492147417.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:37.580Z,1492147417.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:37.962Z,1492147417.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:37.978Z,1492147417.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:38.394Z,1492147418.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:38.522Z,1492147418.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:38.747Z,1492147418.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:38.762Z,1492147418.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:39.186Z,1492147419.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:39.267Z,1492147419.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:39.563Z,1492147419.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:39.666Z,1492147419.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:39.958Z,1492147419.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:39.973Z,1492147419.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:40.358Z,1492147420.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:40.471Z,1492147420.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:40.766Z,1492147420.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:40.786Z,1492147420.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:41.165Z,1492147421.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:41.211Z,1492147421.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:41.553Z,1492147421.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:41.616Z,1492147421.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:41.953Z,1492147421.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:41.981Z,1492147421.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:42.353Z,1492147422.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:42.449Z,1492147422.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:42.761Z,1492147422.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:42.777Z,1492147422.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:43.158Z,1492147423.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:43.183Z,1492147423.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:43.562Z,1492147423.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:43.578Z,1492147423.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:43.962Z,1492147423.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:43.977Z,1492147423.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:44.361Z,1492147424.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:44.377Z,1492147424.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:44.757Z,1492147424.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:44.781Z,1492147424.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:45.161Z,1492147425.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:45.180Z,1492147425.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:45.567Z,1492147425.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:45.584Z,1492147425.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:45.959Z,1492147425.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:45.983Z,1492147425.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:46.357Z,1492147426.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:46.382Z,1492147426.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:46.800Z,1492147426.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:46.845Z,1492147426.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:47.157Z,1492147427.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:47.191Z,1492147427.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:47.550Z,1492147427.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:47.576Z,1492147427.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:47.958Z,1492147427.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:47.997Z,1492147427.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:48.353Z,1492147428.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:48.370Z,1492147428.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:48.807Z,1492147428.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:48.828Z,1492147428.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:49.162Z,1492147429.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:49.179Z,1492147429.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:49.558Z,1492147429.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:49.574Z,1492147429.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:49.965Z,1492147429.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:49.983Z,1492147429.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:50.410Z,1492147430.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:50.463Z,1492147430.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:50.758Z,1492147430.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:50.773Z,1492147430.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:51.167Z,1492147431.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:51.184Z,1492147431.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:51.567Z,1492147431.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:51.583Z,1492147431.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:51.961Z,1492147431.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:51.982Z,1492147431.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:52.403Z,1492147432.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:52.474Z,1492147432.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:52.755Z,1492147432.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:52.771Z,1492147432.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:53.169Z,1492147433.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:53.287Z,1492147433.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:53.559Z,1492147433.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:53.575Z,1492147433.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:53.958Z,1492147433.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:53.986Z,1492147433.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:54.421Z,1492147434.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:54.480Z,1492147434.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:54.763Z,1492147434.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:54.781Z,1492147434.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:55.161Z,1492147435.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:55.221Z,1492147435.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:55.559Z,1492147435.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:55.604Z,1492147435.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:55.961Z,1492147435.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:55.979Z,1492147435.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:56.405Z,1492147436.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:56.459Z,1492147436.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:56.761Z,1492147436.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:56.780Z,1492147436.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:57.158Z,1492147437.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:57.182Z,1492147437.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:57.562Z,1492147437.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:57.577Z,1492147437.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:57.959Z,1492147437.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:57.986Z,1492147437.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:58.353Z,1492147438.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:58.380Z,1492147438.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:58.753Z,1492147438.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:58.771Z,1492147438.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:59.158Z,1492147439.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:59.178Z,1492147439.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:59.554Z,1492147439.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:59.570Z,1492147439.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:23:59.965Z,1492147439.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:23:59.981Z,1492147439.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:00.361Z,1492147440.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:00.376Z,1492147440.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:00.788Z,1492147440.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:00.827Z,1492147440.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:01.165Z,1492147441.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:01.181Z,1492147441.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:01.561Z,1492147441.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:01.576Z,1492147441.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:01.961Z,1492147441.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:01.985Z,1492147441.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:02.361Z,1492147442.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:02.376Z,1492147442.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:02.781Z,1492147442.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:02.814Z,1492147442.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:03.157Z,1492147443.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:03.185Z,1492147443.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:03.569Z,1492147443.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:03.585Z,1492147443.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:03.953Z,1492147443.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:03.988Z,1492147443.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:04.440Z,1492147444.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:04.502Z,1492147444.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:07.896Z,1492147447.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:07.991Z,1492147447.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:08.098Z,1492147448.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:08.118Z,1492147448.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:08.465Z,1492147448.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:08.530Z,1492147448.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:08.873Z,1492147448.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:08.889Z,1492147448.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:09.271Z,1492147449.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:09.329Z,1492147449.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:09.670Z,1492147449.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:09.714Z,1492147449.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:10.068Z,1492147450.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:10.083Z,1492147450.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:10.469Z,1492147450.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:10.490Z,1492147450.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:10.878Z,1492147450.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:10.894Z,1492147450.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:11.273Z,1492147451.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:11.288Z,1492147451.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:11.669Z,1492147451.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:11.685Z,1492147451.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:12.069Z,1492147452.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:12.090Z,1492147452.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:12.481Z,1492147452.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:12.525Z,1492147452.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:12.876Z,1492147452.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:12.892Z,1492147452.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:13.269Z,1492147453.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:13.284Z,1492147453.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:13.669Z,1492147453.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:13.684Z,1492147453.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:14.072Z,1492147454.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:14.088Z,1492147454.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:14.477Z,1492147454.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:14.492Z,1492147454.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:14.861Z,1492147454.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:14.888Z,1492147454.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:15.270Z,1492147455.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:15.286Z,1492147455.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:15.673Z,1492147455.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:15.689Z,1492147455.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:16.077Z,1492147456.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:16.092Z,1492147456.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:16.458Z,1492147456.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:16.486Z,1492147456.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:16.861Z,1492147456.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:16.888Z,1492147456.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:17.269Z,1492147457.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:17.289Z,1492147457.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:17.673Z,1492147457.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:17.694Z,1492147457.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:18.077Z,1492147458.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:18.092Z,1492147458.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:18.461Z,1492147458.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:18.494Z,1492147458.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:18.874Z,1492147458.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:18.898Z,1492147458.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:19.261Z,1492147459.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:19.287Z,1492147459.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:19.677Z,1492147459.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:19.693Z,1492147459.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:20.077Z,1492147460.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:20.093Z,1492147460.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:20.473Z,1492147460.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:20.488Z,1492147460.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:20.882Z,1492147460.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:20.902Z,1492147460.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:21.265Z,1492147461.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:21.292Z,1492147461.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:21.661Z,1492147461.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:21.706Z,1492147461.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:22.065Z,1492147462.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:22.111Z,1492147462.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:22.461Z,1492147462.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:22.500Z,1492147462.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:22.861Z,1492147462.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:22.914Z,1492147462.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:23.265Z,1492147463.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:23.299Z,1492147463.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:23.658Z,1492147463.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:23.710Z,1492147463.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:24.064Z,1492147464.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:24.111Z,1492147464.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:24.461Z,1492147464.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:24.499Z,1492147464.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:24.861Z,1492147464.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:24.898Z,1492147464.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:25.261Z,1492147465.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:25.303Z,1492147465.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:25.661Z,1492147465.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:25.704Z,1492147465.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:26.065Z,1492147466.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:26.097Z,1492147466.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:26.478Z,1492147466.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:26.501Z,1492147466.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:26.873Z,1492147466.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:26.903Z,1492147466.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:27.262Z,1492147467.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:27.278Z,1492147467.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:27.667Z,1492147467.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:27.683Z,1492147467.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:28.069Z,1492147468.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:28.086Z,1492147468.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:28.470Z,1492147468.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:28.486Z,1492147468.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:28.869Z,1492147468.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:28.890Z,1492147468.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:29.270Z,1492147469.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:29.290Z,1492147469.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:29.666Z,1492147469.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:29.682Z,1492147469.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:30.069Z,1492147470.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:30.090Z,1492147470.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:30.473Z,1492147470.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:30.494Z,1492147470.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:30.870Z,1492147470.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:30.886Z,1492147470.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:31.264Z,1492147471.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:31.296Z,1492147471.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:31.674Z,1492147471.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:31.690Z,1492147471.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:32.069Z,1492147472.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:32.085Z,1492147472.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:32.470Z,1492147472.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:32.486Z,1492147472.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:32.875Z,1492147472.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:32.891Z,1492147472.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:33.269Z,1492147473.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:33.286Z,1492147473.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:33.678Z,1492147473.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:33.693Z,1492147473.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:34.079Z,1492147474.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:34.095Z,1492147474.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:34.461Z,1492147474.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:34.489Z,1492147474.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:34.862Z,1492147474.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:34.890Z,1492147474.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:35.266Z,1492147475.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:35.293Z,1492147475.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:35.683Z,1492147475.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:35.699Z,1492147475.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:36.062Z,1492147476.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:36.118Z,1492147476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:36.462Z,1492147476.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:36.518Z,1492147476.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:36.875Z,1492147476.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:36.905Z,1492147476.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:37.270Z,1492147477.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:37.298Z,1492147477.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:37.668Z,1492147477.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:37.721Z,1492147477.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:38.065Z,1492147478.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:38.090Z,1492147478.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:38.470Z,1492147478.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:38.512Z,1492147478.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:38.871Z,1492147478.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:38.925Z,1492147478.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:39.269Z,1492147479.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:39.285Z,1492147479.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:39.670Z,1492147479.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:39.686Z,1492147479.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:40.070Z,1492147480.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:40.086Z,1492147480.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:40.470Z,1492147480.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:40.485Z,1492147480.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:40.877Z,1492147480.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:40.933Z,1492147480.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:41.274Z,1492147481.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:41.290Z,1492147481.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:41.670Z,1492147481.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:41.686Z,1492147481.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:42.079Z,1492147482.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:42.094Z,1492147482.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:42.467Z,1492147482.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:42.487Z,1492147482.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:42.863Z,1492147482.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:42.902Z,1492147482.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:43.299Z,1492147483.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:43.331Z,1492147483.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:43.688Z,1492147483.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:43.712Z,1492147483.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:44.066Z,1492147484.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:44.085Z,1492147484.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:44.471Z,1492147484.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:44.531Z,1492147484.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:44.863Z,1492147484.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:44.908Z,1492147484.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:45.261Z,1492147485.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:45.293Z,1492147485.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:45.664Z,1492147485.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:45.714Z,1492147485.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:46.065Z,1492147486.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:46.104Z,1492147486.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:46.461Z,1492147486.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:46.502Z,1492147486.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:46.866Z,1492147486.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:46.906Z,1492147486.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:47.270Z,1492147487.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:47.285Z,1492147487.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:47.670Z,1492147487.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:47.686Z,1492147487.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:48.069Z,1492147488.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:48.084Z,1492147488.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:48.469Z,1492147488.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:48.490Z,1492147488.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:48.879Z,1492147488.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:48.895Z,1492147488.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:49.274Z,1492147489.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:49.290Z,1492147489.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:49.668Z,1492147489.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:49.690Z,1492147489.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:50.064Z,1492147490.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:50.090Z,1492147490.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:50.470Z,1492147490.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:50.490Z,1492147490.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:50.877Z,1492147490.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:50.910Z,1492147490.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:51.261Z,1492147491.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:51.314Z,1492147491.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:51.661Z,1492147491.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:51.687Z,1492147491.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:52.061Z,1492147492.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:52.094Z,1492147492.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:52.461Z,1492147492.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:52.518Z,1492147492.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:52.861Z,1492147492.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:52.898Z,1492147492.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:53.258Z,1492147493.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:53.302Z,1492147493.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:53.665Z,1492147493.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:53.718Z,1492147493.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:54.064Z,1492147494.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:54.103Z,1492147494.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:54.461Z,1492147494.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:54.503Z,1492147494.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:54.869Z,1492147494.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:54.902Z,1492147494.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:55.261Z,1492147495.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:55.276Z,1492147495.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:55.669Z,1492147495.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:55.684Z,1492147495.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:56.068Z,1492147496.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:56.084Z,1492147496.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:56.468Z,1492147496.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:56.483Z,1492147496.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:56.869Z,1492147496.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:56.885Z,1492147496.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:57.269Z,1492147497.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:57.285Z,1492147497.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:57.669Z,1492147497.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:57.690Z,1492147497.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:58.069Z,1492147498.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:58.084Z,1492147498.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:58.473Z,1492147498.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:58.489Z,1492147498.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:58.878Z,1492147498.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:58.893Z,1492147498.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:59.255Z,1492147499.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:59.289Z,1492147499.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:24:59.673Z,1492147499.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:24:59.689Z,1492147499.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:00.069Z,1492147500.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:00.090Z,1492147500.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:00.469Z,1492147500.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:00.484Z,1492147500.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:00.874Z,1492147500.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:00.890Z,1492147500.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:01.276Z,1492147501.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:01.292Z,1492147501.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:01.670Z,1492147501.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:01.685Z,1492147501.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:02.069Z,1492147502.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:02.085Z,1492147502.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:02.467Z,1492147502.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:02.490Z,1492147502.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:02.498Z,1492147502.499 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:25:02.499Z,1492147502.499 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:25:02.499Z,1492147502.499 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:25:02.499Z,1492147502.499 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:25:02.869Z,1492147502.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:02.890Z,1492147502.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:02.899Z,1492147502.899 [Default:CheckIn:D] Stopped
2017-04-14T05:25:02.899Z,1492147502.899 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:25:03.261Z,1492147503.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:03.288Z,1492147503.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:03.297Z,1492147503.297 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 118.959676 min 
2017-04-14T05:25:03.297Z,1492147503.297 [Default:CheckIn:E] Stopped
2017-04-14T05:25:03.297Z,1492147503.297 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:25:03.297Z,1492147503.297 [Default:CheckIn] Stopped
2017-04-14T05:25:03.298Z,1492147503.297 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:25:03.298Z,1492147503.298 [Default:CheckIn](INFO): Running loop #18
2017-04-14T05:25:03.298Z,1492147503.298 [Default:CheckIn] Running Loop=18
2017-04-14T05:25:03.298Z,1492147503.298 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:25:03.298Z,1492147503.298 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:25:06.787Z,1492147506.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:06.874Z,1492147506.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:06.957Z,1492147506.957 [NAL9602](INFO): Powering up
2017-04-14T05:25:06.974Z,1492147506.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:07.009Z,1492147507.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:07.364Z,1492147507.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:07.416Z,1492147507.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:07.761Z,1492147507.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:07.776Z,1492147507.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:08.161Z,1492147508.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:08.226Z,1492147508.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:08.562Z,1492147508.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:08.577Z,1492147508.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:08.973Z,1492147508.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:09.043Z,1492147509.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:09.365Z,1492147509.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:09.381Z,1492147509.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:09.768Z,1492147509.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:09.783Z,1492147509.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:10.153Z,1492147510.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:10.185Z,1492147510.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:10.555Z,1492147510.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:10.680Z,1492147510.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:10.986Z,1492147510.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:11.004Z,1492147511.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:11.355Z,1492147511.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:11.370Z,1492147511.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:11.774Z,1492147511.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:11.829Z,1492147511.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:12.158Z,1492147512.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:12.205Z,1492147512.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:12.561Z,1492147512.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:12.654Z,1492147512.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:12.958Z,1492147512.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:13.021Z,1492147513.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:13.357Z,1492147513.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:13.372Z,1492147513.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:13.754Z,1492147513.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:13.769Z,1492147513.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:14.173Z,1492147514.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:14.194Z,1492147514.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:14.553Z,1492147514.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:14.574Z,1492147514.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:14.957Z,1492147514.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:14.972Z,1492147514.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:15.362Z,1492147515.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:15.378Z,1492147515.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:15.758Z,1492147515.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:15.778Z,1492147515.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:16.163Z,1492147516.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:16.294Z,1492147516.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:16.555Z,1492147516.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:16.596Z,1492147516.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:16.955Z,1492147516.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:17.004Z,1492147517.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:17.355Z,1492147517.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:17.394Z,1492147517.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:17.802Z,1492147517.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:17.820Z,1492147517.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:18.137Z,1492147518.137 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:25:18.156Z,1492147518.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:18.198Z,1492147518.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:18.553Z,1492147518.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:18.592Z,1492147518.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:18.972Z,1492147518.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:19.001Z,1492147519.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:19.377Z,1492147519.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:19.393Z,1492147519.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:19.781Z,1492147519.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:19.802Z,1492147519.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:20.158Z,1492147520.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:20.196Z,1492147520.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:20.563Z,1492147520.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:20.621Z,1492147520.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:20.965Z,1492147520.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:21.029Z,1492147521.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:21.368Z,1492147521.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:21.385Z,1492147521.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:21.765Z,1492147521.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:21.826Z,1492147521.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:22.162Z,1492147522.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:22.182Z,1492147522.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:22.587Z,1492147522.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:22.657Z,1492147522.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:22.972Z,1492147522.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:23.020Z,1492147523.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:23.355Z,1492147523.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:23.391Z,1492147523.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:23.754Z,1492147523.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:23.807Z,1492147523.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:24.154Z,1492147524.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:24.196Z,1492147524.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:24.590Z,1492147524.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:24.665Z,1492147524.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:24.959Z,1492147524.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:24.975Z,1492147524.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:25.361Z,1492147525.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:25.377Z,1492147525.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:25.760Z,1492147525.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:25.786Z,1492147525.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:26.167Z,1492147526.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:26.183Z,1492147526.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:26.575Z,1492147526.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:26.673Z,1492147526.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:26.957Z,1492147526.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:26.995Z,1492147526.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:27.357Z,1492147527.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:27.396Z,1492147527.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:27.753Z,1492147527.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:27.794Z,1492147527.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:28.153Z,1492147528.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:28.169Z,1492147528.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:28.556Z,1492147528.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:28.580Z,1492147528.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:28.956Z,1492147528.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:28.986Z,1492147528.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:29.353Z,1492147529.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:29.389Z,1492147529.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:29.787Z,1492147529.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:29.830Z,1492147529.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:30.154Z,1492147530.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:30.170Z,1492147530.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:30.553Z,1492147530.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:30.590Z,1492147530.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:30.954Z,1492147530.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:30.990Z,1492147530.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:31.354Z,1492147531.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:31.390Z,1492147531.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:31.762Z,1492147531.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:31.778Z,1492147531.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:32.162Z,1492147532.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:32.178Z,1492147532.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:32.562Z,1492147532.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:32.578Z,1492147532.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:32.971Z,1492147532.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:32.987Z,1492147532.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:33.363Z,1492147533.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:33.380Z,1492147533.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:33.769Z,1492147533.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:33.794Z,1492147533.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:34.165Z,1492147534.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:34.182Z,1492147534.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:34.553Z,1492147534.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:34.592Z,1492147534.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:34.961Z,1492147534.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:35.050Z,1492147535.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:35.353Z,1492147535.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:35.398Z,1492147535.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:35.751Z,1492147535.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:35.767Z,1492147535.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:36.153Z,1492147536.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:36.215Z,1492147536.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:36.565Z,1492147536.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:36.600Z,1492147536.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:36.961Z,1492147536.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:37.025Z,1492147537.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:37.362Z,1492147537.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:37.423Z,1492147537.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:37.524Z,1492147537.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:37.760Z,1492147537.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:37.777Z,1492147537.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:38.160Z,1492147538.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:38.180Z,1492147538.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:38.320Z,1492147538.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:38.632Z,1492147538.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:38.656Z,1492147538.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:38.953Z,1492147538.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:38.985Z,1492147538.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:39.357Z,1492147539.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:39.385Z,1492147539.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:39.753Z,1492147539.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:39.786Z,1492147539.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:40.173Z,1492147540.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:40.194Z,1492147540.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:40.646Z,1492147540.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:40.681Z,1492147540.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:40.961Z,1492147540.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:40.988Z,1492147540.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:41.373Z,1492147541.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:41.394Z,1492147541.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:41.753Z,1492147541.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:41.777Z,1492147541.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:42.153Z,1492147542.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:42.270Z,1492147542.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:42.562Z,1492147542.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:42.577Z,1492147542.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:42.962Z,1492147542.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:42.978Z,1492147542.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:43.366Z,1492147543.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:43.382Z,1492147543.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:43.738Z,1492147543.738 [NAL9602](INFO): SBD MO Status=2, MOMSN=2111, MT Status=2, MTMSN=0
2017-04-14T05:25:43.738Z,1492147543.738 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T05:25:43.755Z,1492147543.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:43.818Z,1492147543.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:44.163Z,1492147544.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:44.258Z,1492147544.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:44.258Z,1492147544.258 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:25:44.258Z,1492147544.258 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:25:44.293Z,1492147544.293 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:44.293Z,1492147544.293 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:25:44.293Z,1492147544.293 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:25:44.336Z,1492147544.336 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:25:44.336Z,1492147544.336 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:25:44.571Z,1492147544.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:44.632Z,1492147544.632 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:25:44.632Z,1492147544.632 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:25:44.633Z,1492147544.633 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:25:44.633Z,1492147544.633 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:25:44.969Z,1492147544.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:44.984Z,1492147544.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:25:44.984Z,1492147544.984 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:25:44.985Z,1492147544.985 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:25:44.989Z,1492147544.989 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:25:44.990Z,1492147544.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:25:44.990Z,1492147544.990 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:25:45.361Z,1492147545.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:45.381Z,1492147545.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:45.753Z,1492147545.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:45.790Z,1492147545.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:46.158Z,1492147546.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:46.233Z,1492147546.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:46.553Z,1492147546.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:46.569Z,1492147546.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:46.965Z,1492147546.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:46.000Z,1492147547.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:47.361Z,1492147547.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:47.402Z,1492147547.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:47.758Z,1492147547.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:47.774Z,1492147547.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:48.225Z,1492147548.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:48.278Z,1492147548.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:48.569Z,1492147548.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:48.586Z,1492147548.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:48.962Z,1492147548.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:49.022Z,1492147549.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:49.373Z,1492147549.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:49.433Z,1492147549.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:49.753Z,1492147549.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:49.787Z,1492147549.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:50.153Z,1492147550.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:50.181Z,1492147550.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:50.574Z,1492147550.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:50.631Z,1492147550.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:50.953Z,1492147550.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:50.989Z,1492147550.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:51.367Z,1492147551.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:51.438Z,1492147551.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:51.764Z,1492147551.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:51.829Z,1492147551.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:52.155Z,1492147552.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:52.199Z,1492147552.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:52.595Z,1492147552.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:52.648Z,1492147552.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:52.962Z,1492147552.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:52.982Z,1492147552.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:53.364Z,1492147553.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:53.393Z,1492147553.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:53.768Z,1492147553.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:53.794Z,1492147553.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:54.156Z,1492147554.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:54.200Z,1492147554.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:54.629Z,1492147554.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:54.723Z,1492147554.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:54.977Z,1492147554.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:55.067Z,1492147555.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:55.355Z,1492147555.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:55.400Z,1492147555.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:55.753Z,1492147555.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:55.768Z,1492147555.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:56.224Z,1492147556.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:56.248Z,1492147556.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:56.567Z,1492147556.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:56.583Z,1492147556.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:56.971Z,1492147556.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:56.987Z,1492147556.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:57.354Z,1492147557.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:57.388Z,1492147557.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:57.771Z,1492147557.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:57.787Z,1492147557.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:58.153Z,1492147558.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:58.272Z,1492147558.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:58.558Z,1492147558.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:58.575Z,1492147558.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:58.975Z,1492147558.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:59.062Z,1492147559.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:59.372Z,1492147559.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:59.394Z,1492147559.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:25:59.816Z,1492147559.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:25:59.841Z,1492147559.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:00.211Z,1492147560.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:00.297Z,1492147560.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:00.563Z,1492147560.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:00.580Z,1492147560.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:00.964Z,1492147560.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:00.981Z,1492147560.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:01.356Z,1492147561.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:01.395Z,1492147561.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:01.408Z,1492147561.408 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:01.408Z,1492147561.408 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T05:26:01.408Z,1492147561.408 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:26:01.480Z,1492147561.480 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:26:01.759Z,1492147561.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:01.794Z,1492147561.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:01.854Z,1492147561.854 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:26:01.855Z,1492147561.855 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T05:26:02.213Z,1492147562.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:02.286Z,1492147562.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:02.309Z,1492147562.309 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:26:02.309Z,1492147562.309 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:26:02.310Z,1492147562.310 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:26:02.559Z,1492147562.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:02.606Z,1492147562.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:02.969Z,1492147562.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:03.009Z,1492147563.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:03.367Z,1492147563.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:03.403Z,1492147563.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:07.562Z,1492147567.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:07.646Z,1492147567.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:07.750Z,1492147567.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:07.796Z,1492147567.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:08.143Z,1492147568.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:08.188Z,1492147568.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:08.616Z,1492147568.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:08.753Z,1492147568.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:08.935Z,1492147568.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:08.973Z,1492147568.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:09.339Z,1492147569.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:09.409Z,1492147569.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:09.734Z,1492147569.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:09.798Z,1492147569.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:10.156Z,1492147570.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:10.248Z,1492147570.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:10.547Z,1492147570.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:10.565Z,1492147570.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:10.945Z,1492147570.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:10.995Z,1492147570.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:11.343Z,1492147571.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:11.359Z,1492147571.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:11.739Z,1492147571.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:11.762Z,1492147571.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:12.133Z,1492147572.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:12.277Z,1492147572.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:12.541Z,1492147572.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:12.562Z,1492147572.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:12.960Z,1492147572.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:12.991Z,1492147572.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:13.333Z,1492147573.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:13.372Z,1492147573.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:13.729Z,1492147573.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:13.756Z,1492147573.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:14.161Z,1492147574.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:14.249Z,1492147574.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:14.539Z,1492147574.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:14.555Z,1492147574.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:14.932Z,1492147574.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:14.956Z,1492147574.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:15.340Z,1492147575.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:15.362Z,1492147575.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:15.738Z,1492147575.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:15.754Z,1492147575.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:16.152Z,1492147576.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:16.249Z,1492147576.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:16.551Z,1492147576.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:16.577Z,1492147576.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:16.941Z,1492147576.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:16.957Z,1492147576.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:17.341Z,1492147577.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:17.362Z,1492147577.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:17.738Z,1492147577.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:17.754Z,1492147577.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:18.140Z,1492147578.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:18.156Z,1492147578.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:18.529Z,1492147578.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:18.562Z,1492147578.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:18.954Z,1492147578.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:19.004Z,1492147579.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:19.329Z,1492147579.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:19.366Z,1492147579.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:19.733Z,1492147579.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:19.766Z,1492147579.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:20.133Z,1492147580.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:20.156Z,1492147580.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:20.552Z,1492147580.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:20.609Z,1492147580.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:20.929Z,1492147580.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:20.962Z,1492147580.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:21.337Z,1492147581.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:21.379Z,1492147581.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:21.732Z,1492147581.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:21.790Z,1492147581.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:22.145Z,1492147582.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:22.223Z,1492147582.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:22.568Z,1492147582.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:22.610Z,1492147582.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:22.929Z,1492147582.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:22.982Z,1492147582.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:23.333Z,1492147583.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:23.360Z,1492147583.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:23.733Z,1492147583.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:23.783Z,1492147583.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:24.210Z,1492147584.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:24.282Z,1492147584.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:24.559Z,1492147584.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:24.620Z,1492147584.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:24.933Z,1492147584.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:24.959Z,1492147584.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:25.329Z,1492147585.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:25.357Z,1492147585.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:25.715Z,1492147585.715 [NAL9602](INFO): SBD MO Status=0, MOMSN=2111, MT Status=0, MTMSN=0
2017-04-14T05:26:25.715Z,1492147585.715 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:26:25.732Z,1492147585.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:25.774Z,1492147585.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:26.199Z,1492147586.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:26.262Z,1492147586.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:26.546Z,1492147586.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:26.566Z,1492147586.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:26.924Z,1492147586.924 [NAL9602](INFO): GPS fix at 20170414T052637: (36.802356, -121.787136)
2017-04-14T05:26:26.956Z,1492147586.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:27.006Z,1492147587.006 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:26:27.006Z,1492147587.006 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:26:27.359Z,1492147587.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:27.408Z,1492147587.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:27.408Z,1492147587.408 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:26:27.408Z,1492147587.408 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:26:27.421Z,1492147587.421 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:27.421Z,1492147587.421 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:26:27.422Z,1492147587.422 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:26:27.466Z,1492147587.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:26:27.466Z,1492147587.466 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:26:27.814Z,1492147587.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:27.967Z,1492147587.967 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:26:27.967Z,1492147587.967 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:26:27.968Z,1492147587.968 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:26:27.968Z,1492147587.968 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:26:28.228Z,1492147588.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:28.299Z,1492147588.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:26:28.300Z,1492147588.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:26:28.300Z,1492147588.300 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:26:28.320Z,1492147588.320 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:26:28.321Z,1492147588.321 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:26:28.321Z,1492147588.321 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:26:33.723Z,1492147593.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:33.749Z,1492147593.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:33.840Z,1492147593.840 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0076.lzma
2017-04-14T05:26:33.884Z,1492147593.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:33.913Z,1492147593.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:34.220Z,1492147594.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:34.247Z,1492147594.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:34.598Z,1492147594.598 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0076.lzma.bak
2017-04-14T05:26:34.598Z,1492147594.598 [DataOverHttps](INFO): SBD MOMSN=4885211
2017-04-14T05:26:34.629Z,1492147594.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:34.670Z,1492147594.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:35.034Z,1492147595.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:35.059Z,1492147595.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:35.426Z,1492147595.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:35.458Z,1492147595.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:39.062Z,1492147599.062 [NAL9602](INFO): Powering down
2017-04-14T05:26:39.081Z,1492147599.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:39.189Z,1492147599.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:39.293Z,1492147599.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:39.332Z,1492147599.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:39.673Z,1492147599.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:39.737Z,1492147599.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:40.077Z,1492147600.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:40.173Z,1492147600.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:40.465Z,1492147600.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:40.517Z,1492147600.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:40.881Z,1492147600.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:40.953Z,1492147600.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:41.273Z,1492147601.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:41.288Z,1492147601.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:41.665Z,1492147601.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:41.681Z,1492147601.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:42.077Z,1492147602.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:42.156Z,1492147602.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:42.477Z,1492147602.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:42.493Z,1492147602.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:42.865Z,1492147602.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:42.892Z,1492147602.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:43.265Z,1492147603.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:43.299Z,1492147603.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:43.663Z,1492147603.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:43.697Z,1492147603.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:44.077Z,1492147604.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:44.168Z,1492147604.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:44.465Z,1492147604.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:44.480Z,1492147604.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:44.885Z,1492147604.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:44.926Z,1492147604.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:45.270Z,1492147605.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:45.290Z,1492147605.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:45.674Z,1492147605.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:45.689Z,1492147605.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:46.073Z,1492147606.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:46.089Z,1492147606.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:46.469Z,1492147606.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:46.499Z,1492147606.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:46.865Z,1492147606.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:46.894Z,1492147606.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:47.263Z,1492147607.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:47.278Z,1492147607.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:47.665Z,1492147607.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:47.681Z,1492147607.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:48.070Z,1492147608.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:48.094Z,1492147608.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:48.505Z,1492147608.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:48.551Z,1492147608.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:48.883Z,1492147608.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:48.899Z,1492147608.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:49.292Z,1492147609.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:49.338Z,1492147609.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:49.665Z,1492147609.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:49.698Z,1492147609.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:50.082Z,1492147610.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:50.098Z,1492147610.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:50.549Z,1492147610.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:50.570Z,1492147610.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:50.869Z,1492147610.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:50.896Z,1492147610.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:51.290Z,1492147611.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:51.310Z,1492147611.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:51.669Z,1492147611.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:51.684Z,1492147611.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:52.108Z,1492147612.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:52.183Z,1492147612.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:52.478Z,1492147612.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:52.494Z,1492147612.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:52.874Z,1492147612.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:52.961Z,1492147612.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:53.265Z,1492147613.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:53.301Z,1492147613.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:53.665Z,1492147613.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:53.730Z,1492147613.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:54.065Z,1492147614.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:54.172Z,1492147614.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:54.469Z,1492147614.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:54.511Z,1492147614.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:54.878Z,1492147614.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:54.950Z,1492147614.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:55.273Z,1492147615.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:55.289Z,1492147615.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:55.673Z,1492147615.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:55.688Z,1492147615.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:56.111Z,1492147616.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:56.192Z,1492147616.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:56.465Z,1492147616.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:56.481Z,1492147616.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:56.872Z,1492147616.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:56.931Z,1492147616.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:57.267Z,1492147617.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:57.316Z,1492147617.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:57.671Z,1492147617.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:57.690Z,1492147617.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:58.090Z,1492147618.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:58.177Z,1492147618.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:26:58.473Z,1492147618.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:26:58.493Z,1492147618.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:01.983Z,1492147621.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:02.001Z,1492147622.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:02.100Z,1492147622.100 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0077.lzma
2017-04-14T05:27:02.126Z,1492147622.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:02.171Z,1492147622.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:02.513Z,1492147622.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:02.582Z,1492147622.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:02.862Z,1492147622.862 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0077.lzma.bak
2017-04-14T05:27:02.862Z,1492147622.862 [DataOverHttps](INFO): SBD MOMSN=4885214
2017-04-14T05:27:02.885Z,1492147622.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:02.933Z,1492147622.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:03.297Z,1492147623.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:03.330Z,1492147623.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:03.340Z,1492147623.339 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:27:03.340Z,1492147623.340 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:27:03.340Z,1492147623.340 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:27:03.689Z,1492147623.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:03.724Z,1492147623.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:07.568Z,1492147627.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:07.695Z,1492147627.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:07.839Z,1492147627.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:07.876Z,1492147627.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:08.226Z,1492147628.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:08.293Z,1492147628.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:08.619Z,1492147628.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:08.664Z,1492147628.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:09.012Z,1492147629.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:09.054Z,1492147629.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:09.407Z,1492147629.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:09.478Z,1492147629.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:09.807Z,1492147629.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:09.862Z,1492147629.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:10.234Z,1492147630.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:10.263Z,1492147630.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:10.608Z,1492147630.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:10.651Z,1492147630.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:11.028Z,1492147631.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:11.065Z,1492147631.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:11.412Z,1492147631.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:11.461Z,1492147631.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:11.824Z,1492147631.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:11.873Z,1492147631.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:12.213Z,1492147632.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:12.228Z,1492147632.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:12.628Z,1492147632.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:12.674Z,1492147632.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:13.013Z,1492147633.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:13.034Z,1492147633.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:13.417Z,1492147633.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:13.433Z,1492147633.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:13.813Z,1492147633.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:13.829Z,1492147633.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:14.218Z,1492147634.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:14.236Z,1492147634.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:14.622Z,1492147634.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:14.638Z,1492147634.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:15.005Z,1492147635.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:15.039Z,1492147635.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:15.418Z,1492147635.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:15.438Z,1492147635.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:15.805Z,1492147635.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:15.831Z,1492147635.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:16.205Z,1492147636.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:16.234Z,1492147636.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:16.605Z,1492147636.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:16.632Z,1492147636.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:17.005Z,1492147637.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:17.040Z,1492147637.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:17.406Z,1492147637.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:17.438Z,1492147637.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:17.810Z,1492147637.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:17.842Z,1492147637.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:18.213Z,1492147638.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:18.240Z,1492147638.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:18.614Z,1492147638.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:18.641Z,1492147638.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:19.005Z,1492147639.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:19.038Z,1492147639.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:19.418Z,1492147639.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:19.445Z,1492147639.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:19.809Z,1492147639.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:19.842Z,1492147639.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:20.211Z,1492147640.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:20.240Z,1492147640.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:20.611Z,1492147640.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:20.628Z,1492147640.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:21.015Z,1492147641.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:21.051Z,1492147641.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:21.414Z,1492147641.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:21.493Z,1492147641.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:21.814Z,1492147641.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:21.829Z,1492147641.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:22.215Z,1492147642.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:22.231Z,1492147642.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:22.614Z,1492147642.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:22.671Z,1492147642.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:23.014Z,1492147643.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:23.030Z,1492147643.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:23.409Z,1492147643.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:23.473Z,1492147643.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:23.814Z,1492147643.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:23.877Z,1492147643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:24.208Z,1492147644.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:24.240Z,1492147644.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:24.602Z,1492147644.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:24.638Z,1492147644.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:25.021Z,1492147645.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:25.038Z,1492147645.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:25.405Z,1492147645.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:25.432Z,1492147645.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:25.809Z,1492147645.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:25.836Z,1492147645.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:26.205Z,1492147646.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:26.232Z,1492147646.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:26.605Z,1492147646.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:26.638Z,1492147646.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:27.009Z,1492147647.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:27.036Z,1492147647.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:27.405Z,1492147647.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:27.431Z,1492147647.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:27.805Z,1492147647.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:27.834Z,1492147647.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:28.205Z,1492147648.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:28.232Z,1492147648.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:28.605Z,1492147648.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:28.631Z,1492147648.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:29.005Z,1492147649.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:29.031Z,1492147649.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:29.334Z,1492147649.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:29.405Z,1492147649.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:29.438Z,1492147649.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:29.805Z,1492147649.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:29.841Z,1492147649.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:30.128Z,1492147650.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:30.209Z,1492147650.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:30.235Z,1492147650.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:30.605Z,1492147650.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:30.637Z,1492147650.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:31.005Z,1492147651.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:31.038Z,1492147651.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:31.413Z,1492147651.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:31.444Z,1492147651.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:31.807Z,1492147651.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:31.823Z,1492147651.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:32.213Z,1492147652.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:32.248Z,1492147652.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:32.614Z,1492147652.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:32.629Z,1492147652.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:33.014Z,1492147653.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:33.034Z,1492147653.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:33.414Z,1492147653.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:33.429Z,1492147653.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:33.813Z,1492147653.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:33.834Z,1492147653.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:34.213Z,1492147654.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:34.234Z,1492147654.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:34.626Z,1492147654.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:34.641Z,1492147654.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:35.005Z,1492147655.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:35.043Z,1492147655.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:35.405Z,1492147655.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:35.438Z,1492147655.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:35.805Z,1492147655.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:35.898Z,1492147655.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:36.205Z,1492147656.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:36.241Z,1492147656.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:36.617Z,1492147656.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:36.645Z,1492147656.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:37.005Z,1492147657.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:37.050Z,1492147657.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:37.405Z,1492147657.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:37.441Z,1492147657.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:37.802Z,1492147657.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:37.854Z,1492147657.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:38.205Z,1492147658.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:38.257Z,1492147658.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:38.610Z,1492147658.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:38.626Z,1492147658.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:39.014Z,1492147659.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:39.030Z,1492147659.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:39.413Z,1492147659.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:39.429Z,1492147659.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:39.811Z,1492147659.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:39.838Z,1492147659.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:40.213Z,1492147660.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:40.234Z,1492147660.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:40.625Z,1492147660.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:40.640Z,1492147660.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:41.021Z,1492147661.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:41.036Z,1492147661.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:41.402Z,1492147661.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:41.430Z,1492147661.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:41.805Z,1492147661.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:41.831Z,1492147661.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:42.205Z,1492147662.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:42.231Z,1492147662.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:42.609Z,1492147662.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:42.646Z,1492147662.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:43.013Z,1492147663.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:43.049Z,1492147663.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:43.413Z,1492147663.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:43.447Z,1492147663.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:43.806Z,1492147663.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:43.822Z,1492147663.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:44.205Z,1492147664.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:44.220Z,1492147664.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:44.616Z,1492147664.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:44.660Z,1492147664.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:45.026Z,1492147665.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:45.056Z,1492147665.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:45.414Z,1492147665.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:45.441Z,1492147665.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:45.816Z,1492147665.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:45.834Z,1492147665.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:46.215Z,1492147666.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:46.240Z,1492147666.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:46.611Z,1492147666.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:46.656Z,1492147666.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:47.011Z,1492147667.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:47.060Z,1492147667.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:47.414Z,1492147667.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:47.429Z,1492147667.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:47.818Z,1492147667.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:47.833Z,1492147667.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:48.223Z,1492147668.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:48.239Z,1492147668.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:48.613Z,1492147668.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:48.629Z,1492147668.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:49.005Z,1492147669.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:49.038Z,1492147669.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:49.422Z,1492147669.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:49.442Z,1492147669.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:49.805Z,1492147669.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:49.837Z,1492147669.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:50.205Z,1492147670.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:50.258Z,1492147670.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:50.613Z,1492147670.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:50.666Z,1492147670.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:51.014Z,1492147671.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:51.047Z,1492147671.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:51.405Z,1492147671.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:51.457Z,1492147671.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:51.814Z,1492147671.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:51.846Z,1492147671.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:52.205Z,1492147672.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:52.266Z,1492147672.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:52.607Z,1492147672.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:52.651Z,1492147672.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:53.013Z,1492147673.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:53.045Z,1492147673.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:53.410Z,1492147673.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:53.438Z,1492147673.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:53.809Z,1492147673.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:53.824Z,1492147673.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:54.211Z,1492147674.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:54.253Z,1492147674.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:54.609Z,1492147674.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:54.625Z,1492147674.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:55.013Z,1492147675.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:55.065Z,1492147675.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:55.415Z,1492147675.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:55.430Z,1492147675.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:55.816Z,1492147675.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:55.832Z,1492147675.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:56.214Z,1492147676.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:56.230Z,1492147676.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:56.609Z,1492147676.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:56.629Z,1492147676.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:57.019Z,1492147677.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:57.035Z,1492147677.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:57.421Z,1492147677.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:57.436Z,1492147677.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:57.808Z,1492147677.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:57.833Z,1492147677.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:58.216Z,1492147678.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:58.232Z,1492147678.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:58.627Z,1492147678.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:58.643Z,1492147678.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:59.005Z,1492147679.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:59.044Z,1492147679.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:59.405Z,1492147679.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:59.440Z,1492147679.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:27:59.818Z,1492147679.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:27:59.839Z,1492147679.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:00.205Z,1492147680.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:00.278Z,1492147680.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:00.628Z,1492147680.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:00.679Z,1492147680.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:01.021Z,1492147681.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:01.065Z,1492147681.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:01.415Z,1492147681.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:01.442Z,1492147681.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:01.807Z,1492147681.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:01.858Z,1492147681.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:02.207Z,1492147682.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:02.261Z,1492147682.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:02.621Z,1492147682.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:02.653Z,1492147682.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:03.017Z,1492147683.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:03.101Z,1492147683.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:03.410Z,1492147683.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:03.437Z,1492147683.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:03.813Z,1492147683.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:03.834Z,1492147683.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:07.449Z,1492147687.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:07.546Z,1492147687.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:07.682Z,1492147687.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:07.706Z,1492147687.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:08.057Z,1492147688.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:08.097Z,1492147688.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:08.462Z,1492147688.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:08.533Z,1492147688.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:08.861Z,1492147688.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:08.896Z,1492147688.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:09.249Z,1492147689.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:09.325Z,1492147689.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:09.653Z,1492147689.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:09.714Z,1492147689.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:10.116Z,1492147690.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:10.153Z,1492147690.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:10.517Z,1492147690.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:10.552Z,1492147690.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:10.869Z,1492147690.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:10.906Z,1492147690.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:11.306Z,1492147691.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:11.334Z,1492147691.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:11.657Z,1492147691.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:11.674Z,1492147691.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:12.058Z,1492147692.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:12.102Z,1492147692.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:12.467Z,1492147692.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:12.493Z,1492147692.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:12.897Z,1492147692.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:12.913Z,1492147692.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:13.258Z,1492147693.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:13.273Z,1492147693.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:13.651Z,1492147693.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:13.692Z,1492147693.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:14.054Z,1492147694.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:14.076Z,1492147694.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:14.459Z,1492147694.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:14.475Z,1492147694.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:14.868Z,1492147694.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:14.886Z,1492147694.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:15.242Z,1492147695.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:15.282Z,1492147695.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:15.654Z,1492147695.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:15.677Z,1492147695.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:16.063Z,1492147696.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:16.085Z,1492147696.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:16.449Z,1492147696.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:16.478Z,1492147696.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:16.849Z,1492147696.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:16.898Z,1492147696.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:17.249Z,1492147697.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:17.275Z,1492147697.275 [PNI_TCM](ERROR): CRC does not match. Expected:0x31942 got:0x1857
2017-04-14T05:28:17.302Z,1492147697.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:17.657Z,1492147697.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:17.684Z,1492147697.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:18.061Z,1492147698.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:18.094Z,1492147698.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:18.451Z,1492147698.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:18.487Z,1492147698.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:18.864Z,1492147698.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:18.883Z,1492147698.883 [PNI_TCM](ERROR): CRC does not match. Expected:0x48094 got:0x47110
2017-04-14T05:28:18.932Z,1492147698.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:19.266Z,1492147699.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:19.282Z,1492147699.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:19.657Z,1492147699.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:19.681Z,1492147699.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:20.045Z,1492147700.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:20.086Z,1492147700.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:20.446Z,1492147700.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:20.489Z,1492147700.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:20.849Z,1492147700.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:20.882Z,1492147700.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:21.251Z,1492147701.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:21.286Z,1492147701.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:21.645Z,1492147701.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:21.733Z,1492147701.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:22.049Z,1492147702.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:22.093Z,1492147702.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:22.451Z,1492147702.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:22.480Z,1492147702.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:22.849Z,1492147702.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:22.902Z,1492147702.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:23.258Z,1492147703.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:23.288Z,1492147703.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:23.664Z,1492147703.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:23.711Z,1492147703.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:24.141Z,1492147704.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:24.206Z,1492147704.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:24.458Z,1492147704.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:24.474Z,1492147704.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:24.879Z,1492147704.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:24.906Z,1492147704.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:25.256Z,1492147705.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:25.272Z,1492147705.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:25.654Z,1492147705.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:25.674Z,1492147705.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:26.061Z,1492147706.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:26.078Z,1492147706.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:26.460Z,1492147706.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:26.478Z,1492147706.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:26.850Z,1492147706.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:26.890Z,1492147706.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:27.266Z,1492147707.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:27.282Z,1492147707.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:27.669Z,1492147707.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:27.685Z,1492147707.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:28.093Z,1492147708.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:28.134Z,1492147708.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:28.451Z,1492147708.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:28.481Z,1492147708.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:28.868Z,1492147708.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:28.889Z,1492147708.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:29.270Z,1492147709.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:29.285Z,1492147709.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:29.703Z,1492147709.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:29.744Z,1492147709.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:30.058Z,1492147710.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:30.109Z,1492147710.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:30.450Z,1492147710.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:30.502Z,1492147710.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:30.863Z,1492147710.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:30.902Z,1492147710.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:31.265Z,1492147711.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:31.304Z,1492147711.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:31.666Z,1492147711.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:31.701Z,1492147711.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:32.060Z,1492147712.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:32.094Z,1492147712.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:32.460Z,1492147712.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:32.476Z,1492147712.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:32.859Z,1492147712.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:32.878Z,1492147712.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:33.270Z,1492147713.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:33.305Z,1492147713.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:33.673Z,1492147713.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:33.701Z,1492147713.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:34.049Z,1492147714.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:34.076Z,1492147714.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:34.464Z,1492147714.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:34.490Z,1492147714.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:34.876Z,1492147714.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:34.906Z,1492147714.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:35.262Z,1492147715.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:35.294Z,1492147715.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:35.655Z,1492147715.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:35.684Z,1492147715.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:36.065Z,1492147716.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:36.216Z,1492147716.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:36.452Z,1492147716.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:36.506Z,1492147716.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:36.893Z,1492147716.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:36.917Z,1492147716.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:37.252Z,1492147717.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:37.314Z,1492147717.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:37.660Z,1492147717.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:37.710Z,1492147717.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:38.078Z,1492147718.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:38.122Z,1492147718.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:38.467Z,1492147718.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:38.521Z,1492147718.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:38.853Z,1492147718.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:38.869Z,1492147718.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:39.257Z,1492147719.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:39.278Z,1492147719.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:39.665Z,1492147719.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:39.681Z,1492147719.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:40.045Z,1492147720.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:40.078Z,1492147720.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:40.470Z,1492147720.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:40.486Z,1492147720.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:40.928Z,1492147720.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:40.986Z,1492147720.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:41.272Z,1492147721.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:41.297Z,1492147721.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:41.654Z,1492147721.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:41.695Z,1492147721.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:42.053Z,1492147722.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:42.085Z,1492147722.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:42.460Z,1492147722.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:42.492Z,1492147722.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:42.859Z,1492147722.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:42.891Z,1492147722.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:43.254Z,1492147723.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:43.270Z,1492147723.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:43.656Z,1492147723.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:43.672Z,1492147723.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:44.077Z,1492147724.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:44.127Z,1492147724.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:44.484Z,1492147724.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:44.530Z,1492147724.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:44.899Z,1492147724.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:44.924Z,1492147724.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:45.247Z,1492147725.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:45.279Z,1492147725.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:45.670Z,1492147725.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:45.689Z,1492147725.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:46.057Z,1492147726.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:46.084Z,1492147726.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:46.486Z,1492147726.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:46.568Z,1492147726.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:46.858Z,1492147726.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:46.896Z,1492147726.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:47.257Z,1492147727.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:47.290Z,1492147727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:47.679Z,1492147727.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:47.702Z,1492147727.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:48.062Z,1492147728.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:48.088Z,1492147728.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:48.456Z,1492147728.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:48.484Z,1492147728.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:48.855Z,1492147728.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:48.890Z,1492147728.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:49.253Z,1492147729.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:49.271Z,1492147729.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:49.651Z,1492147729.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:49.675Z,1492147729.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:50.055Z,1492147730.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:50.072Z,1492147730.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:50.461Z,1492147730.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:50.544Z,1492147730.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:50.857Z,1492147730.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:50.891Z,1492147730.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:51.245Z,1492147731.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:51.287Z,1492147731.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:51.653Z,1492147731.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:51.686Z,1492147731.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:52.054Z,1492147732.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:52.099Z,1492147732.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:52.450Z,1492147732.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:52.478Z,1492147732.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:52.853Z,1492147732.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:52.907Z,1492147732.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:53.256Z,1492147733.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:53.300Z,1492147733.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:53.658Z,1492147733.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:53.704Z,1492147733.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:54.053Z,1492147734.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:54.081Z,1492147734.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:54.455Z,1492147734.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:54.472Z,1492147734.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:54.856Z,1492147734.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:54.880Z,1492147734.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:55.254Z,1492147735.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:55.270Z,1492147735.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:55.492Z,1492147735.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:55.645Z,1492147735.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:55.681Z,1492147735.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:56.059Z,1492147736.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:56.074Z,1492147736.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:56.288Z,1492147736.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:56.472Z,1492147736.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:56.494Z,1492147736.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:56.692Z,1492147736.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:56.860Z,1492147736.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:56.876Z,1492147736.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:57.263Z,1492147737.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:57.278Z,1492147737.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:57.488Z,1492147737.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:57.717Z,1492147737.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:57.742Z,1492147737.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:58.054Z,1492147738.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:58.094Z,1492147738.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:58.284Z,1492147738.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:58.450Z,1492147738.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:58.494Z,1492147738.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:58.688Z,1492147738.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:58.850Z,1492147738.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:58.901Z,1492147738.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:59.250Z,1492147739.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:59.295Z,1492147739.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:28:59.650Z,1492147739.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:28:59.679Z,1492147739.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:00.050Z,1492147740.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:00.067Z,1492147740.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:00.453Z,1492147740.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:00.494Z,1492147740.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:00.859Z,1492147740.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:00.893Z,1492147740.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:01.262Z,1492147741.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:01.293Z,1492147741.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:01.704Z,1492147741.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:01.741Z,1492147741.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:02.052Z,1492147742.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:02.070Z,1492147742.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:02.462Z,1492147742.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:02.498Z,1492147742.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:02.505Z,1492147742.505 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:02.506Z,1492147742.506 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:29:02.506Z,1492147742.506 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:29:02.521Z,1492147742.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:29:02.857Z,1492147742.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:02.902Z,1492147742.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:02.921Z,1492147742.921 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:29:02.921Z,1492147742.921 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:29:03.292Z,1492147743.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:03.321Z,1492147743.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:03.357Z,1492147743.357 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:29:03.357Z,1492147743.358 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:29:03.358Z,1492147743.358 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:29:03.660Z,1492147743.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:03.676Z,1492147743.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:04.053Z,1492147744.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:04.079Z,1492147744.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:07.505Z,1492147747.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:07.594Z,1492147747.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:07.703Z,1492147747.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:07.723Z,1492147747.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:08.085Z,1492147748.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:08.130Z,1492147748.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:08.486Z,1492147748.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:08.518Z,1492147748.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:08.876Z,1492147748.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:08.929Z,1492147748.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:09.277Z,1492147749.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:09.319Z,1492147749.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:09.680Z,1492147749.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:09.695Z,1492147749.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:10.079Z,1492147750.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:10.095Z,1492147750.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:10.475Z,1492147750.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:10.491Z,1492147750.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:10.875Z,1492147750.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:10.905Z,1492147750.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:11.275Z,1492147751.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:11.371Z,1492147751.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:11.680Z,1492147751.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:11.728Z,1492147751.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:12.078Z,1492147752.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:12.093Z,1492147752.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:12.492Z,1492147752.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:12.545Z,1492147752.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:12.877Z,1492147752.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:12.910Z,1492147752.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:13.275Z,1492147753.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:13.322Z,1492147753.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:13.674Z,1492147753.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:13.723Z,1492147753.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:14.075Z,1492147754.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:14.091Z,1492147754.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:14.486Z,1492147754.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:14.550Z,1492147754.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:14.881Z,1492147754.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:14.896Z,1492147754.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:15.281Z,1492147755.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:15.296Z,1492147755.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:15.681Z,1492147755.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:15.702Z,1492147755.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:16.081Z,1492147756.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:16.097Z,1492147756.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:16.479Z,1492147756.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:16.508Z,1492147756.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:16.881Z,1492147756.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:16.897Z,1492147756.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:17.276Z,1492147757.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:17.309Z,1492147757.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:17.681Z,1492147757.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:17.702Z,1492147757.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:18.080Z,1492147758.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:18.138Z,1492147758.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:18.484Z,1492147758.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:18.505Z,1492147758.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:18.881Z,1492147758.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:18.897Z,1492147758.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:19.276Z,1492147759.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:19.301Z,1492147759.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:19.695Z,1492147759.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:19.719Z,1492147759.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:20.073Z,1492147760.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:20.110Z,1492147760.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:20.484Z,1492147760.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:20.506Z,1492147760.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:20.873Z,1492147760.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:20.900Z,1492147760.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:21.273Z,1492147761.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:21.354Z,1492147761.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:21.673Z,1492147761.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:21.716Z,1492147761.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:22.077Z,1492147762.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:22.109Z,1492147762.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:22.474Z,1492147762.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:22.514Z,1492147762.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:22.877Z,1492147762.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:22.898Z,1492147762.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:23.274Z,1492147763.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:23.362Z,1492147763.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:23.677Z,1492147763.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:23.727Z,1492147763.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:24.081Z,1492147764.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:24.116Z,1492147764.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:24.479Z,1492147764.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:24.507Z,1492147764.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:24.882Z,1492147764.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:24.897Z,1492147764.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:25.286Z,1492147765.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:25.302Z,1492147765.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:25.686Z,1492147765.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:25.702Z,1492147765.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:26.082Z,1492147766.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:26.101Z,1492147766.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:26.481Z,1492147766.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:26.510Z,1492147766.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:26.874Z,1492147766.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:26.901Z,1492147766.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:27.273Z,1492147767.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:27.299Z,1492147767.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:27.686Z,1492147767.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:27.702Z,1492147767.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:28.073Z,1492147768.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:28.106Z,1492147768.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:28.473Z,1492147768.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:28.510Z,1492147768.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:28.510Z,1492147768.510 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:29:28.510Z,1492147768.510 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:29:28.517Z,1492147768.517 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:28.517Z,1492147768.517 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:29:28.517Z,1492147768.517 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:29:28.559Z,1492147768.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:29:28.560Z,1492147768.560 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:29:28.873Z,1492147768.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:28.938Z,1492147768.938 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:29:28.938Z,1492147768.938 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:29:28.947Z,1492147768.947 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:29:28.947Z,1492147768.947 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:29:29.270Z,1492147769.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:29.285Z,1492147769.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:29:29.285Z,1492147769.285 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:29:29.286Z,1492147769.286 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:29:29.302Z,1492147769.302 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:29:29.303Z,1492147769.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:29:29.303Z,1492147769.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:29:29.673Z,1492147769.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:29.694Z,1492147769.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:30.089Z,1492147770.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:30.114Z,1492147770.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:30.478Z,1492147770.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:30.494Z,1492147770.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:30.889Z,1492147770.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:30.929Z,1492147770.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:31.279Z,1492147771.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:31.295Z,1492147771.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:31.683Z,1492147771.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:31.698Z,1492147771.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:32.081Z,1492147772.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:32.103Z,1492147772.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:32.476Z,1492147772.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:32.506Z,1492147772.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:32.886Z,1492147772.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:32.904Z,1492147772.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:33.289Z,1492147773.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:33.304Z,1492147773.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:33.690Z,1492147773.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:33.710Z,1492147773.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:34.073Z,1492147774.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:34.100Z,1492147774.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:34.488Z,1492147774.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:34.519Z,1492147774.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:34.878Z,1492147774.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:34.905Z,1492147774.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:35.300Z,1492147775.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:35.345Z,1492147775.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:35.674Z,1492147775.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:35.726Z,1492147775.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:36.097Z,1492147776.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:36.226Z,1492147776.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:36.482Z,1492147776.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:36.498Z,1492147776.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:36.885Z,1492147776.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:36.934Z,1492147776.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:37.284Z,1492147777.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:37.299Z,1492147777.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:37.681Z,1492147777.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:37.733Z,1492147777.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:38.084Z,1492147778.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:38.130Z,1492147778.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:38.480Z,1492147778.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:38.513Z,1492147778.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:38.875Z,1492147778.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:38.941Z,1492147778.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:39.287Z,1492147779.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:39.322Z,1492147779.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:39.681Z,1492147779.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:39.697Z,1492147779.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:40.118Z,1492147780.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:40.134Z,1492147780.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:40.485Z,1492147780.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:40.505Z,1492147780.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:40.908Z,1492147780.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:40.964Z,1492147780.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:41.284Z,1492147781.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:41.333Z,1492147781.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:41.674Z,1492147781.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:41.758Z,1492147781.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:42.082Z,1492147782.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:42.146Z,1492147782.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:42.485Z,1492147782.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:42.508Z,1492147782.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:42.873Z,1492147782.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:42.899Z,1492147782.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:43.270Z,1492147783.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:43.297Z,1492147783.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:43.673Z,1492147783.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:43.706Z,1492147783.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:44.151Z,1492147784.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:44.166Z,1492147784.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:44.507Z,1492147784.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:44.533Z,1492147784.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:44.886Z,1492147784.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:44.920Z,1492147784.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:45.273Z,1492147785.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:45.333Z,1492147785.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:45.683Z,1492147785.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:45.701Z,1492147785.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:46.084Z,1492147786.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:46.100Z,1492147786.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:46.492Z,1492147786.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:46.531Z,1492147786.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:46.882Z,1492147786.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:46.898Z,1492147786.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:47.289Z,1492147787.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:47.309Z,1492147787.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:47.682Z,1492147787.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:47.702Z,1492147787.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:48.073Z,1492147788.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:48.100Z,1492147788.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:48.489Z,1492147788.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:48.506Z,1492147788.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:48.898Z,1492147788.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:48.914Z,1492147788.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:49.275Z,1492147789.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:49.319Z,1492147789.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:49.711Z,1492147789.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:49.792Z,1492147789.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:50.073Z,1492147790.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:50.115Z,1492147790.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:50.481Z,1492147790.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:50.515Z,1492147790.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:50.892Z,1492147790.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:50.916Z,1492147790.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:51.287Z,1492147791.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:51.303Z,1492147791.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:51.685Z,1492147791.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:51.726Z,1492147791.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:52.077Z,1492147792.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:52.104Z,1492147792.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:52.506Z,1492147792.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:52.561Z,1492147792.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:52.881Z,1492147792.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:52.923Z,1492147792.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:53.278Z,1492147793.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:53.302Z,1492147793.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:53.678Z,1492147793.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:53.693Z,1492147793.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:54.082Z,1492147794.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:54.097Z,1492147794.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:54.481Z,1492147794.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:54.522Z,1492147794.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:54.885Z,1492147794.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:54.917Z,1492147794.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:55.274Z,1492147795.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:55.289Z,1492147795.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:55.682Z,1492147795.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:55.698Z,1492147795.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:56.082Z,1492147796.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:56.102Z,1492147796.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:56.480Z,1492147796.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:56.496Z,1492147796.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:56.882Z,1492147796.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:56.897Z,1492147796.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:57.281Z,1492147797.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:57.297Z,1492147797.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:57.681Z,1492147797.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:57.696Z,1492147797.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:58.090Z,1492147798.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:58.106Z,1492147798.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:58.481Z,1492147798.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:58.496Z,1492147798.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:58.879Z,1492147798.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:58.895Z,1492147798.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:59.285Z,1492147799.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:59.301Z,1492147799.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:29:59.680Z,1492147799.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:29:59.695Z,1492147799.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:00.079Z,1492147800.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:00.106Z,1492147800.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:00.477Z,1492147800.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:00.498Z,1492147800.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:00.896Z,1492147800.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:00.914Z,1492147800.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:01.281Z,1492147801.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:01.314Z,1492147801.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:01.677Z,1492147801.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:01.704Z,1492147801.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:02.102Z,1492147802.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:02.122Z,1492147802.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:02.477Z,1492147802.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:02.510Z,1492147802.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:02.878Z,1492147802.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:02.905Z,1492147802.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:03.273Z,1492147803.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:03.313Z,1492147803.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:03.678Z,1492147803.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:03.721Z,1492147803.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:04.106Z,1492147804.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:04.199Z,1492147804.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:04.485Z,1492147804.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:04.506Z,1492147804.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:04.885Z,1492147804.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:04.952Z,1492147804.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:05.286Z,1492147805.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:05.345Z,1492147805.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:05.691Z,1492147805.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:05.708Z,1492147805.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:06.085Z,1492147806.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:06.100Z,1492147806.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:06.473Z,1492147806.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:06.543Z,1492147806.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:06.889Z,1492147806.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:06.910Z,1492147806.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:07.271Z,1492147807.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:07.314Z,1492147807.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:07.678Z,1492147807.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:07.753Z,1492147807.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:08.078Z,1492147808.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:08.111Z,1492147808.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:08.479Z,1492147808.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:08.494Z,1492147808.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:08.883Z,1492147808.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:08.901Z,1492147808.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:09.298Z,1492147809.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:09.338Z,1492147809.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:09.686Z,1492147809.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:09.702Z,1492147809.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:10.094Z,1492147810.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:10.116Z,1492147810.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:10.478Z,1492147810.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:10.505Z,1492147810.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:10.874Z,1492147810.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:10.909Z,1492147810.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:11.278Z,1492147811.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:11.305Z,1492147811.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:11.676Z,1492147811.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:11.711Z,1492147811.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:12.078Z,1492147812.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:12.094Z,1492147812.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:12.484Z,1492147812.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:12.500Z,1492147812.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:12.883Z,1492147812.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:12.913Z,1492147812.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:13.275Z,1492147813.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:13.302Z,1492147813.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:13.684Z,1492147813.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:13.701Z,1492147813.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:14.073Z,1492147814.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:14.106Z,1492147814.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:14.477Z,1492147814.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:14.503Z,1492147814.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:14.877Z,1492147814.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:14.904Z,1492147814.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:15.293Z,1492147815.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:15.309Z,1492147815.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:15.673Z,1492147815.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:15.711Z,1492147815.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:16.073Z,1492147816.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:16.109Z,1492147816.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:16.475Z,1492147816.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:16.514Z,1492147816.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:16.881Z,1492147816.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:16.908Z,1492147816.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:17.274Z,1492147817.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:17.310Z,1492147817.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:17.673Z,1492147817.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:17.689Z,1492147817.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:18.076Z,1492147818.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:18.156Z,1492147818.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:18.484Z,1492147818.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:18.525Z,1492147818.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:18.910Z,1492147818.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:18.926Z,1492147818.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:19.281Z,1492147819.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:19.297Z,1492147819.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:19.684Z,1492147819.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:19.725Z,1492147819.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:20.082Z,1492147820.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:20.189Z,1492147820.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:20.490Z,1492147820.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:20.537Z,1492147820.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:20.873Z,1492147820.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:20.954Z,1492147820.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:21.283Z,1492147821.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:21.306Z,1492147821.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:21.671Z,1492147821.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:21.707Z,1492147821.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:22.073Z,1492147822.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:22.094Z,1492147822.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:22.485Z,1492147822.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:22.520Z,1492147822.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:22.878Z,1492147822.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:22.886Z,1492147822.886 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:30:22.887Z,1492147822.886 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:30:22.887Z,1492147822.887 [BPC1](ERROR): Communications Fault
2017-04-14T05:30:22.895Z,1492147822.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:22.938Z,1492147822.938 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:30:23.285Z,1492147823.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:23.326Z,1492147823.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:23.681Z,1492147823.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:23.696Z,1492147823.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:24.104Z,1492147824.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:24.128Z,1492147824.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:24.184Z,1492147824.184 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:30:24.184Z,1492147824.184 [BPC1] No Fault, FailCount= 1
2017-04-14T05:30:24.481Z,1492147824.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:24.566Z,1492147824.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:24.878Z,1492147824.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:24.919Z,1492147824.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:25.280Z,1492147825.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:25.295Z,1492147825.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:25.697Z,1492147825.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:25.728Z,1492147825.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:26.101Z,1492147826.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:26.132Z,1492147826.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:26.489Z,1492147826.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:26.504Z,1492147826.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:26.884Z,1492147826.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:26.900Z,1492147826.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:27.283Z,1492147827.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:27.298Z,1492147827.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:27.683Z,1492147827.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:27.698Z,1492147827.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:28.081Z,1492147828.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:28.097Z,1492147828.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:28.490Z,1492147828.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:28.506Z,1492147828.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:28.885Z,1492147828.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:28.906Z,1492147828.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:29.285Z,1492147829.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:29.301Z,1492147829.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:29.681Z,1492147829.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:29.702Z,1492147829.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:30.082Z,1492147830.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:30.114Z,1492147830.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:30.473Z,1492147830.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:30.500Z,1492147830.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:30.873Z,1492147830.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:30.909Z,1492147830.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:31.271Z,1492147831.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:31.313Z,1492147831.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:31.673Z,1492147831.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:31.706Z,1492147831.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:32.126Z,1492147832.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:32.182Z,1492147832.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:32.488Z,1492147832.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:32.511Z,1492147832.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:32.881Z,1492147832.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:32.912Z,1492147832.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:33.278Z,1492147833.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:33.306Z,1492147833.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:33.677Z,1492147833.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:33.693Z,1492147833.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:34.091Z,1492147834.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:34.184Z,1492147834.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:34.485Z,1492147834.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:34.501Z,1492147834.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:34.884Z,1492147834.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:34.935Z,1492147834.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:35.278Z,1492147835.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:35.299Z,1492147835.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:35.709Z,1492147835.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:35.849Z,1492147835.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:36.073Z,1492147836.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:36.109Z,1492147836.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:36.473Z,1492147836.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:36.527Z,1492147836.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:36.886Z,1492147836.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:36.942Z,1492147836.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:37.273Z,1492147837.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:37.318Z,1492147837.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:37.673Z,1492147837.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:37.793Z,1492147837.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:38.082Z,1492147838.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:38.112Z,1492147838.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:38.489Z,1492147838.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:38.510Z,1492147838.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:38.881Z,1492147838.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:38.897Z,1492147838.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:39.283Z,1492147839.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:39.299Z,1492147839.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:39.691Z,1492147839.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:39.707Z,1492147839.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:40.075Z,1492147840.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:40.103Z,1492147840.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:40.487Z,1492147840.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:40.503Z,1492147840.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:40.910Z,1492147840.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:40.956Z,1492147840.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:41.267Z,1492147841.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:41.303Z,1492147841.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:41.704Z,1492147841.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:41.813Z,1492147841.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:42.081Z,1492147842.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:42.097Z,1492147842.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:42.482Z,1492147842.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:42.526Z,1492147842.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:42.883Z,1492147842.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:42.920Z,1492147842.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:43.281Z,1492147843.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:43.296Z,1492147843.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:43.681Z,1492147843.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:43.697Z,1492147843.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:44.080Z,1492147844.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:44.125Z,1492147844.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:44.475Z,1492147844.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:44.517Z,1492147844.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:44.873Z,1492147844.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:44.907Z,1492147844.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:45.281Z,1492147845.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:45.318Z,1492147845.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:45.673Z,1492147845.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:45.710Z,1492147845.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:46.176Z,1492147846.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:46.233Z,1492147846.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:46.497Z,1492147846.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:46.538Z,1492147846.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:46.892Z,1492147846.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:46.908Z,1492147846.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:47.284Z,1492147847.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:47.300Z,1492147847.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:47.731Z,1492147847.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:47.805Z,1492147847.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:48.161Z,1492147848.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:48.285Z,1492147848.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:48.485Z,1492147848.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:48.575Z,1492147848.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:48.876Z,1492147848.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:48.920Z,1492147848.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:49.281Z,1492147849.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:49.297Z,1492147849.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:49.677Z,1492147849.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:49.777Z,1492147849.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:50.086Z,1492147850.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:50.110Z,1492147850.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:50.482Z,1492147850.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:50.537Z,1492147850.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:50.879Z,1492147850.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:50.938Z,1492147850.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:51.273Z,1492147851.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:51.309Z,1492147851.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:51.686Z,1492147851.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:51.753Z,1492147851.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:52.085Z,1492147852.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:52.112Z,1492147852.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:52.478Z,1492147852.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:52.495Z,1492147852.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:52.882Z,1492147852.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:52.900Z,1492147852.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:53.286Z,1492147853.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:53.302Z,1492147853.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:53.746Z,1492147853.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:53.840Z,1492147853.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:54.073Z,1492147854.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:54.115Z,1492147854.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:54.473Z,1492147854.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:54.502Z,1492147854.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:54.873Z,1492147854.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:54.889Z,1492147854.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:55.273Z,1492147855.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:55.317Z,1492147855.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:55.681Z,1492147855.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:55.769Z,1492147855.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:56.087Z,1492147856.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:56.104Z,1492147856.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:56.482Z,1492147856.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:56.502Z,1492147856.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:56.879Z,1492147856.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:56.903Z,1492147856.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:57.295Z,1492147857.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:57.321Z,1492147857.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:57.717Z,1492147857.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:57.839Z,1492147857.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:58.081Z,1492147858.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:58.097Z,1492147858.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:58.483Z,1492147858.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:58.498Z,1492147858.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:58.887Z,1492147858.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:58.902Z,1492147858.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:59.296Z,1492147859.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:59.339Z,1492147859.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:30:59.673Z,1492147859.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:30:59.699Z,1492147859.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:00.117Z,1492147860.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:00.154Z,1492147860.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:00.474Z,1492147860.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:00.504Z,1492147860.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:00.875Z,1492147860.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:00.902Z,1492147860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:01.273Z,1492147861.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:01.366Z,1492147861.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:01.674Z,1492147861.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:01.705Z,1492147861.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:02.141Z,1492147862.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:02.199Z,1492147862.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:02.492Z,1492147862.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:02.508Z,1492147862.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:02.874Z,1492147862.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:02.927Z,1492147862.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:03.277Z,1492147863.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:03.348Z,1492147863.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:03.674Z,1492147863.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:03.772Z,1492147863.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:04.084Z,1492147864.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:04.100Z,1492147864.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:04.480Z,1492147864.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:04.509Z,1492147864.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:08.078Z,1492147868.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:08.094Z,1492147868.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:08.213Z,1492147868.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:08.243Z,1492147868.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:08.558Z,1492147868.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:08.602Z,1492147868.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:08.978Z,1492147868.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:09.002Z,1492147869.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:09.362Z,1492147869.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:09.411Z,1492147869.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:09.773Z,1492147869.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:09.832Z,1492147869.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:10.175Z,1492147870.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:10.253Z,1492147870.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:10.573Z,1492147870.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:10.650Z,1492147870.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:10.970Z,1492147870.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:11.022Z,1492147871.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:11.375Z,1492147871.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:11.399Z,1492147871.399 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T05:31:11.450Z,1492147871.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:11.824Z,1492147871.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:11.864Z,1492147871.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:12.187Z,1492147872.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:12.203Z,1492147872.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:12.564Z,1492147872.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:12.592Z,1492147872.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:12.959Z,1492147872.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:12.975Z,1492147872.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:13.361Z,1492147873.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:13.404Z,1492147873.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:13.777Z,1492147873.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:13.875Z,1492147873.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:14.174Z,1492147874.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:14.206Z,1492147874.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:14.555Z,1492147874.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:14.654Z,1492147874.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:14.957Z,1492147874.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:14.984Z,1492147874.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:15.372Z,1492147875.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:15.426Z,1492147875.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:15.773Z,1492147875.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:15.830Z,1492147875.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:16.205Z,1492147876.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:16.229Z,1492147876.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:16.579Z,1492147876.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:16.607Z,1492147876.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:16.952Z,1492147876.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:16.988Z,1492147876.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:17.350Z,1492147877.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:17.397Z,1492147877.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:17.788Z,1492147877.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:17.823Z,1492147877.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:18.153Z,1492147878.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:18.198Z,1492147878.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:18.560Z,1492147878.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:18.588Z,1492147878.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:18.953Z,1492147878.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:18.989Z,1492147878.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:19.352Z,1492147879.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:19.393Z,1492147879.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:19.769Z,1492147879.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:19.798Z,1492147879.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:20.161Z,1492147880.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:20.176Z,1492147880.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:20.560Z,1492147880.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:20.601Z,1492147880.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:20.961Z,1492147880.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:21.004Z,1492147881.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:21.351Z,1492147881.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:21.377Z,1492147881.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:21.761Z,1492147881.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:21.824Z,1492147881.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:22.163Z,1492147882.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:22.204Z,1492147882.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:22.564Z,1492147882.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:22.588Z,1492147882.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:22.972Z,1492147882.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:22.994Z,1492147882.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:23.375Z,1492147883.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:23.392Z,1492147883.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:23.763Z,1492147883.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:23.811Z,1492147883.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:24.153Z,1492147884.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:24.194Z,1492147884.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:24.597Z,1492147884.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:24.639Z,1492147884.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:24.980Z,1492147884.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:24.996Z,1492147884.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:25.359Z,1492147885.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:25.394Z,1492147885.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:25.808Z,1492147885.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:25.840Z,1492147885.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:26.163Z,1492147886.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:26.210Z,1492147886.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:26.570Z,1492147886.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:26.638Z,1492147886.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:26.949Z,1492147886.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:26.990Z,1492147886.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:27.349Z,1492147887.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:27.398Z,1492147887.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:27.767Z,1492147887.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:27.842Z,1492147887.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:28.164Z,1492147888.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:28.179Z,1492147888.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:28.448Z,1492147888.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:28.560Z,1492147888.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:28.622Z,1492147888.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:28.974Z,1492147888.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:28.981Z,1492147888.981 [PNI_TCM](ERROR): CRC does not match. Expected:0x20561 got:0x45593
2017-04-14T05:31:29.038Z,1492147889.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:29.244Z,1492147889.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:29.369Z,1492147889.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:29.386Z,1492147889.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:29.769Z,1492147889.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:29.786Z,1492147889.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:30.170Z,1492147890.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:30.195Z,1492147890.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:30.581Z,1492147890.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:30.621Z,1492147890.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:30.984Z,1492147890.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:31.031Z,1492147891.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:31.358Z,1492147891.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:31.386Z,1492147891.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:31.751Z,1492147891.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:31.795Z,1492147891.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:32.149Z,1492147892.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:32.197Z,1492147892.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:32.596Z,1492147892.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:32.634Z,1492147892.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:32.974Z,1492147892.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:32.989Z,1492147892.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:33.350Z,1492147893.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:33.388Z,1492147893.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:33.753Z,1492147893.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:33.798Z,1492147893.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:34.160Z,1492147894.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:34.198Z,1492147894.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:34.553Z,1492147894.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:34.582Z,1492147894.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:34.985Z,1492147894.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:35.007Z,1492147895.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:35.374Z,1492147895.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:35.402Z,1492147895.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:35.765Z,1492147895.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:35.797Z,1492147895.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:36.160Z,1492147896.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:36.188Z,1492147896.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:36.566Z,1492147896.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:36.581Z,1492147896.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:36.965Z,1492147896.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:36.993Z,1492147896.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:37.370Z,1492147897.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:37.386Z,1492147897.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:37.764Z,1492147897.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:37.784Z,1492147897.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:38.152Z,1492147898.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:38.194Z,1492147898.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:38.559Z,1492147898.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:38.586Z,1492147898.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:38.958Z,1492147898.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:38.992Z,1492147898.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:39.363Z,1492147899.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:39.447Z,1492147899.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:39.771Z,1492147899.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:39.820Z,1492147899.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:40.169Z,1492147900.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:40.222Z,1492147900.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:40.570Z,1492147900.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:40.586Z,1492147900.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:40.965Z,1492147900.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:41.025Z,1492147901.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:41.369Z,1492147901.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:41.419Z,1492147901.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:41.767Z,1492147901.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:41.783Z,1492147901.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:42.180Z,1492147902.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:42.197Z,1492147902.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:42.549Z,1492147902.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:42.580Z,1492147902.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:42.970Z,1492147902.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:42.986Z,1492147902.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:43.371Z,1492147903.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:43.391Z,1492147903.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:43.750Z,1492147903.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:43.830Z,1492147903.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:44.171Z,1492147904.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:44.208Z,1492147904.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:44.559Z,1492147904.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:44.597Z,1492147904.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:44.974Z,1492147904.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:45.000Z,1492147905.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:45.363Z,1492147905.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:45.379Z,1492147905.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:45.758Z,1492147905.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:45.810Z,1492147905.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:46.172Z,1492147906.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:46.188Z,1492147906.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:46.555Z,1492147906.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:46.605Z,1492147906.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:46.982Z,1492147906.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:47.036Z,1492147907.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:47.401Z,1492147907.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:47.441Z,1492147907.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:47.753Z,1492147907.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:47.786Z,1492147907.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:48.153Z,1492147908.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:48.204Z,1492147908.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:48.587Z,1492147908.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:48.606Z,1492147908.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:48.954Z,1492147908.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:49.006Z,1492147909.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:49.371Z,1492147909.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:49.397Z,1492147909.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:49.766Z,1492147909.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:49.816Z,1492147909.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:50.154Z,1492147910.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:50.176Z,1492147910.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:50.561Z,1492147910.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:50.582Z,1492147910.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:50.967Z,1492147910.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:50.982Z,1492147910.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:51.368Z,1492147911.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:51.384Z,1492147911.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:51.760Z,1492147911.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:51.782Z,1492147911.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:52.164Z,1492147912.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:52.222Z,1492147912.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:52.552Z,1492147912.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:52.602Z,1492147912.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:52.953Z,1492147912.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:52.986Z,1492147912.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:53.353Z,1492147913.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:53.386Z,1492147913.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:53.773Z,1492147913.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:53.826Z,1492147913.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:54.174Z,1492147914.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:54.193Z,1492147914.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:54.553Z,1492147914.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:54.598Z,1492147914.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:54.953Z,1492147914.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:55.002Z,1492147915.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:55.353Z,1492147915.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:55.391Z,1492147915.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:55.757Z,1492147915.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:55.788Z,1492147915.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:56.159Z,1492147916.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:56.188Z,1492147916.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:56.557Z,1492147916.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:56.592Z,1492147916.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:56.953Z,1492147916.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:56.993Z,1492147916.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:57.353Z,1492147917.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:57.384Z,1492147917.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:57.759Z,1492147917.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:57.792Z,1492147917.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:58.159Z,1492147918.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:58.192Z,1492147918.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:58.554Z,1492147918.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:58.584Z,1492147918.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:58.974Z,1492147918.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:59.009Z,1492147919.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:59.354Z,1492147919.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:59.427Z,1492147919.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:31:59.753Z,1492147919.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:31:59.836Z,1492147919.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:00.194Z,1492147920.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:00.259Z,1492147920.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:00.583Z,1492147920.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:00.652Z,1492147920.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:00.952Z,1492147920.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:01.004Z,1492147921.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:01.359Z,1492147921.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:01.408Z,1492147921.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:01.761Z,1492147921.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:01.795Z,1492147921.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:02.155Z,1492147922.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:02.187Z,1492147922.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:02.557Z,1492147922.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:02.572Z,1492147922.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:02.959Z,1492147922.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:02.975Z,1492147922.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:03.361Z,1492147923.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:03.382Z,1492147923.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:03.405Z,1492147923.405 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:03.405Z,1492147923.405 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:32:03.405Z,1492147923.405 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:32:03.431Z,1492147923.431 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:32:03.749Z,1492147923.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:03.782Z,1492147923.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:03.790Z,1492147923.790 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:32:03.790Z,1492147923.790 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:32:03.790Z,1492147923.790 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:32:03.790Z,1492147923.790 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:32:03.800Z,1492147923.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:32:03.800Z,1492147923.800 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:32:04.162Z,1492147924.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:04.201Z,1492147924.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:04.206Z,1492147924.206 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:32:04.207Z,1492147924.207 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:32:04.207Z,1492147924.207 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:32:04.210Z,1492147924.210 [Default:CheckIn:D] Stopped
2017-04-14T05:32:04.210Z,1492147924.210 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:32:04.549Z,1492147924.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:04.582Z,1492147924.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:04.599Z,1492147924.599 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 125.981519 min 
2017-04-14T05:32:04.604Z,1492147924.603 [Default:CheckIn:E] Stopped
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn] Stopped
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn](INFO): Running loop #19
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn] Running Loop=19
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:32:04.604Z,1492147924.604 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:32:08.220Z,1492147928.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:08.295Z,1492147928.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:08.389Z,1492147928.389 [NAL9602](INFO): Powering up
2017-04-14T05:32:08.410Z,1492147928.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:08.450Z,1492147928.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:08.787Z,1492147928.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:08.832Z,1492147928.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:09.192Z,1492147929.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:09.212Z,1492147929.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:09.591Z,1492147929.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:09.649Z,1492147929.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:10.032Z,1492147930.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:10.104Z,1492147930.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:10.381Z,1492147930.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:10.413Z,1492147930.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:10.794Z,1492147930.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:10.812Z,1492147930.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:11.201Z,1492147931.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:11.219Z,1492147931.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:11.581Z,1492147931.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:11.617Z,1492147931.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:12.035Z,1492147932.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:12.088Z,1492147932.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:12.382Z,1492147932.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:12.398Z,1492147932.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:12.786Z,1492147932.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:12.801Z,1492147932.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:13.188Z,1492147933.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:13.204Z,1492147933.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:13.635Z,1492147933.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:13.707Z,1492147933.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:13.981Z,1492147933.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:14.011Z,1492147934.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:14.381Z,1492147934.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:14.414Z,1492147934.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:14.780Z,1492147934.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:14.816Z,1492147934.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:15.181Z,1492147935.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:15.219Z,1492147935.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:15.697Z,1492147935.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:15.734Z,1492147935.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:15.992Z,1492147935.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:16.058Z,1492147936.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:16.119Z,1492147936.119 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:32:16.381Z,1492147936.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:16.459Z,1492147936.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:16.783Z,1492147936.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:16.859Z,1492147936.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:17.221Z,1492147937.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:17.279Z,1492147937.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:17.684Z,1492147937.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:17.736Z,1492147937.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:17.988Z,1492147937.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:18.088Z,1492147938.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:18.396Z,1492147938.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:18.448Z,1492147938.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:18.794Z,1492147938.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:18.844Z,1492147938.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:19.196Z,1492147939.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:19.212Z,1492147939.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:19.584Z,1492147939.584 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:32:19.619Z,1492147939.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:19.739Z,1492147939.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:19.993Z,1492147939.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:20.014Z,1492147940.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:20.396Z,1492147940.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:20.412Z,1492147940.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:20.806Z,1492147940.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:20.891Z,1492147940.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:21.207Z,1492147941.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:21.230Z,1492147941.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:21.585Z,1492147941.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:21.699Z,1492147941.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:21.981Z,1492147941.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:22.010Z,1492147942.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:22.383Z,1492147942.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:22.423Z,1492147942.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:22.792Z,1492147942.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:22.846Z,1492147942.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:23.181Z,1492147943.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:23.218Z,1492147943.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:23.589Z,1492147943.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:23.616Z,1492147943.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:24.016Z,1492147944.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:24.039Z,1492147944.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:24.389Z,1492147944.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:24.420Z,1492147944.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:24.810Z,1492147944.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:24.828Z,1492147944.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:25.182Z,1492147945.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:25.198Z,1492147945.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:25.589Z,1492147945.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:25.605Z,1492147945.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:25.995Z,1492147945.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:26.054Z,1492147946.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:26.397Z,1492147946.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:26.416Z,1492147946.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:26.789Z,1492147946.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:26.837Z,1492147946.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:27.181Z,1492147947.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:27.210Z,1492147947.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:27.650Z,1492147947.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:27.693Z,1492147947.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:27.985Z,1492147947.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:28.034Z,1492147948.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:28.388Z,1492147948.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:28.406Z,1492147948.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:28.791Z,1492147948.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:28.807Z,1492147948.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:29.187Z,1492147949.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:29.207Z,1492147949.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:29.655Z,1492147949.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:29.704Z,1492147949.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:29.704Z,1492147949.704 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:32:29.704Z,1492147949.704 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:32:29.720Z,1492147949.720 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:29.720Z,1492147949.720 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:32:29.720Z,1492147949.720 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:32:29.734Z,1492147949.734 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:32:29.735Z,1492147949.735 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:32:29.981Z,1492147949.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:30.066Z,1492147950.066 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:32:30.066Z,1492147950.066 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:32:30.071Z,1492147950.071 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:32:30.071Z,1492147950.071 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:32:30.389Z,1492147950.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:30.416Z,1492147950.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:32:30.417Z,1492147950.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:32:30.417Z,1492147950.417 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:32:30.422Z,1492147950.422 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:32:30.423Z,1492147950.422 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:32:30.423Z,1492147950.423 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:32:30.784Z,1492147950.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:30.816Z,1492147950.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:31.200Z,1492147951.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:31.225Z,1492147951.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:31.641Z,1492147951.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:31.677Z,1492147951.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:31.994Z,1492147951.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:32.033Z,1492147952.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:32.394Z,1492147952.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:32.410Z,1492147952.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:32.807Z,1492147952.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:32.816Z,1492147952.816 [BPC1](ERROR): Failed to parse message.
2017-04-14T05:32:32.816Z,1492147952.816 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:32:32.816Z,1492147952.816 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:32:32.816Z,1492147952.816 [BPC1](ERROR): Data Fault
2017-04-14T05:32:32.875Z,1492147952.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:32.916Z,1492147952.916 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:32:33.209Z,1492147953.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:33.226Z,1492147953.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:33.645Z,1492147953.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:33.705Z,1492147953.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:33.983Z,1492147953.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:34.030Z,1492147954.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:34.066Z,1492147954.066 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:32:34.067Z,1492147954.067 [BPC1] No Fault, FailCount= 1
2017-04-14T05:32:34.381Z,1492147954.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:34.470Z,1492147954.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:34.790Z,1492147954.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:34.862Z,1492147954.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:35.185Z,1492147955.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:35.232Z,1492147955.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:35.659Z,1492147955.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:35.718Z,1492147955.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:36.006Z,1492147956.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:36.063Z,1492147956.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:36.402Z,1492147956.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:36.429Z,1492147956.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:36.797Z,1492147956.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:36.822Z,1492147956.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:37.200Z,1492147957.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:37.246Z,1492147957.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:37.594Z,1492147957.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:37.618Z,1492147957.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:38.003Z,1492147958.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:38.024Z,1492147958.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:38.392Z,1492147958.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:38.461Z,1492147958.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:38.796Z,1492147958.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:38.822Z,1492147958.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:39.181Z,1492147959.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:39.220Z,1492147959.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:39.585Z,1492147959.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:39.622Z,1492147959.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:39.983Z,1492147959.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:40.020Z,1492147960.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:40.389Z,1492147960.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:40.427Z,1492147960.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:40.793Z,1492147960.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:40.836Z,1492147960.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:41.189Z,1492147961.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:41.205Z,1492147961.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:41.649Z,1492147961.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:41.665Z,1492147961.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:41.990Z,1492147961.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:42.038Z,1492147962.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:42.394Z,1492147962.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:42.411Z,1492147962.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:42.797Z,1492147962.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:42.812Z,1492147962.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:43.199Z,1492147963.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:43.214Z,1492147963.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:43.622Z,1492147963.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:43.649Z,1492147963.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:44.008Z,1492147964.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:44.031Z,1492147964.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:44.389Z,1492147964.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:44.441Z,1492147964.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:44.786Z,1492147964.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:44.822Z,1492147964.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:45.188Z,1492147965.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:45.243Z,1492147965.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:45.627Z,1492147965.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:45.674Z,1492147965.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:45.981Z,1492147965.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:45.000Z,1492147966.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:46.390Z,1492147966.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:46.430Z,1492147966.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:46.791Z,1492147966.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:46.807Z,1492147966.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:47.189Z,1492147967.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:47.210Z,1492147967.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:47.641Z,1492147967.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:47.662Z,1492147967.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:47.996Z,1492147967.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:48.030Z,1492147968.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:48.399Z,1492147968.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:48.415Z,1492147968.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:48.781Z,1492147968.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:48.819Z,1492147968.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:49.166Z,1492147969.166 [NAL9602](INFO): SBD MO Status=0, MOMSN=2112, MT Status=0, MTMSN=0
2017-04-14T05:32:49.166Z,1492147969.166 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:32:49.183Z,1492147969.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:49.220Z,1492147969.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:49.653Z,1492147969.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:49.693Z,1492147969.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:50.008Z,1492147970.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:50.028Z,1492147970.028 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:32:50.028Z,1492147970.028 [BPC1] Communications Fault, FailCount= 2
2017-04-14T05:32:50.028Z,1492147970.028 [BPC1](ERROR): Communications Fault
2017-04-14T05:32:50.054Z,1492147970.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:50.106Z,1492147970.106 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:32:50.368Z,1492147970.368 [NAL9602](INFO): GPS fix at 20170414T053301: (36.802373, -121.787117)
2017-04-14T05:32:50.402Z,1492147970.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:50.460Z,1492147970.460 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:32:50.460Z,1492147970.460 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:32:50.812Z,1492147970.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:50.846Z,1492147970.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:50.846Z,1492147970.846 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:32:50.846Z,1492147970.846 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:32:50.854Z,1492147970.853 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:50.854Z,1492147970.854 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:32:50.854Z,1492147970.854 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:32:50.869Z,1492147970.869 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:32:50.870Z,1492147970.870 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:32:51.252Z,1492147971.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:51.298Z,1492147971.298 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:32:51.298Z,1492147971.298 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:32:51.299Z,1492147971.299 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:32:51.299Z,1492147971.299 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:32:51.300Z,1492147971.300 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:32:51.300Z,1492147971.300 [BPC1] No Fault, FailCount= 2
2017-04-14T05:32:51.655Z,1492147971.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:51.741Z,1492147971.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:32:51.741Z,1492147971.741 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:32:51.742Z,1492147971.742 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:32:51.747Z,1492147971.747 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:32:51.748Z,1492147971.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:32:51.748Z,1492147971.748 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:32:55.217Z,1492147975.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:55.278Z,1492147975.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:55.364Z,1492147975.365 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20170414T032153/Courier0080.lzma
2017-04-14T05:32:55.394Z,1492147975.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:55.427Z,1492147975.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:55.751Z,1492147975.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:55.786Z,1492147975.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:56.130Z,1492147976.130 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0080.lzma.bak
2017-04-14T05:32:56.130Z,1492147976.130 [DataOverHttps](INFO): SBD MOMSN=4885218
2017-04-14T05:32:56.153Z,1492147976.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:56.200Z,1492147976.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:56.687Z,1492147976.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:56.712Z,1492147976.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:32:56.954Z,1492147976.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:32:56.970Z,1492147976.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:00.505Z,1492147980.505 [NAL9602](INFO): Powering down
2017-04-14T05:33:00.525Z,1492147980.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:00.562Z,1492147980.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:00.665Z,1492147980.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:00.710Z,1492147980.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:01.060Z,1492147981.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:01.089Z,1492147981.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:01.471Z,1492147981.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:01.490Z,1492147981.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:01.854Z,1492147981.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:01.870Z,1492147981.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:02.263Z,1492147982.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:02.292Z,1492147982.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:05.973Z,1492147985.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:06.003Z,1492147986.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:06.075Z,1492147986.075 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0081.lzma
2017-04-14T05:33:06.120Z,1492147986.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:06.161Z,1492147986.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:06.487Z,1492147986.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:06.496Z,1492147986.496 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T05:33:06.496Z,1492147986.496 [BPC1] Data Fault, FailCount= 3
2017-04-14T05:33:06.496Z,1492147986.496 [BPC1](ERROR): Data Fault
2017-04-14T05:33:06.523Z,1492147986.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:06.554Z,1492147986.554 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:33:06.875Z,1492147986.875 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0081.lzma.bak
2017-04-14T05:33:06.875Z,1492147986.875 [DataOverHttps](INFO): SBD MOMSN=4885221
2017-04-14T05:33:06.904Z,1492147986.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:06.956Z,1492147986.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:07.331Z,1492147987.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:07.347Z,1492147987.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:07.356Z,1492147987.356 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:33:07.357Z,1492147987.357 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:33:07.357Z,1492147987.357 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:33:07.701Z,1492147987.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:07.716Z,1492147987.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:07.766Z,1492147987.766 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:33:07.766Z,1492147987.766 [BPC1] No Fault, FailCount= 3
2017-04-14T05:33:12.700Z,1492147992.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:12.775Z,1492147992.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:12.885Z,1492147992.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:12.901Z,1492147992.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:13.255Z,1492147993.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:13.302Z,1492147993.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:13.659Z,1492147993.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:13.674Z,1492147993.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:14.057Z,1492147994.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:14.098Z,1492147994.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:14.457Z,1492147994.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:14.505Z,1492147994.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:14.859Z,1492147994.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:14.896Z,1492147994.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:15.261Z,1492147995.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:15.293Z,1492147995.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:15.659Z,1492147995.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:15.675Z,1492147995.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:16.055Z,1492147996.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:16.071Z,1492147996.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:16.456Z,1492147996.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:16.472Z,1492147996.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:16.857Z,1492147996.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:16.877Z,1492147996.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:17.258Z,1492147997.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:17.278Z,1492147997.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:17.661Z,1492147997.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:17.683Z,1492147997.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:18.050Z,1492147998.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:18.086Z,1492147998.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:18.454Z,1492147998.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:18.480Z,1492147998.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:18.846Z,1492147998.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:18.880Z,1492147998.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:19.269Z,1492147999.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:19.285Z,1492147999.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:19.649Z,1492147999.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:19.687Z,1492147999.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:20.049Z,1492148000.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:20.088Z,1492148000.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:20.454Z,1492148000.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:20.500Z,1492148000.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:20.849Z,1492148000.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:20.887Z,1492148000.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:21.257Z,1492148001.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:21.290Z,1492148001.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:21.653Z,1492148001.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:21.698Z,1492148001.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:22.049Z,1492148002.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:22.087Z,1492148002.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:22.454Z,1492148002.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:22.502Z,1492148002.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:22.861Z,1492148002.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:22.906Z,1492148002.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:23.258Z,1492148003.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:23.277Z,1492148003.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:23.651Z,1492148003.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:23.683Z,1492148003.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:24.102Z,1492148004.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:24.167Z,1492148004.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:24.484Z,1492148004.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:24.602Z,1492148004.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:24.863Z,1492148004.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:24.949Z,1492148004.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:25.258Z,1492148005.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:25.315Z,1492148005.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:25.661Z,1492148005.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:25.775Z,1492148005.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:26.062Z,1492148006.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:26.098Z,1492148006.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:26.458Z,1492148006.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:26.522Z,1492148006.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:26.860Z,1492148006.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:26.882Z,1492148006.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:27.256Z,1492148007.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:27.321Z,1492148007.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:27.657Z,1492148007.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:27.722Z,1492148007.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:28.060Z,1492148008.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:28.082Z,1492148008.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:28.456Z,1492148008.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:28.490Z,1492148008.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:28.851Z,1492148008.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:28.895Z,1492148008.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:29.255Z,1492148009.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:29.342Z,1492148009.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:29.668Z,1492148009.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:29.717Z,1492148009.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:30.067Z,1492148010.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:30.147Z,1492148010.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:30.456Z,1492148010.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:30.472Z,1492148010.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:30.860Z,1492148010.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:30.913Z,1492148010.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:31.283Z,1492148011.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:31.322Z,1492148011.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:31.659Z,1492148011.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:31.675Z,1492148011.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:32.059Z,1492148012.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:32.076Z,1492148012.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:32.451Z,1492148012.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:32.504Z,1492148012.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:32.857Z,1492148012.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:32.888Z,1492148012.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:33.259Z,1492148013.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:33.290Z,1492148013.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:33.654Z,1492148013.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:33.670Z,1492148013.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:34.065Z,1492148014.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:34.097Z,1492148014.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:34.458Z,1492148014.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:34.475Z,1492148014.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:34.862Z,1492148014.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:34.878Z,1492148014.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:35.274Z,1492148015.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:35.326Z,1492148015.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:35.661Z,1492148015.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:35.687Z,1492148015.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:36.057Z,1492148016.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:36.089Z,1492148016.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:36.467Z,1492148016.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:36.519Z,1492148016.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:36.849Z,1492148016.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:36.878Z,1492148016.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:37.250Z,1492148017.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:37.287Z,1492148017.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:37.649Z,1492148017.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:37.685Z,1492148017.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:38.049Z,1492148018.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:38.080Z,1492148018.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:38.450Z,1492148018.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:38.502Z,1492148018.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:38.859Z,1492148018.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:38.886Z,1492148018.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:39.249Z,1492148019.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:39.282Z,1492148019.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:39.649Z,1492148019.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:39.710Z,1492148019.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:40.049Z,1492148020.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:40.117Z,1492148020.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:40.457Z,1492148020.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:40.473Z,1492148020.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:40.861Z,1492148020.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:40.877Z,1492148020.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:41.263Z,1492148021.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:41.335Z,1492148021.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:41.653Z,1492148021.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:41.705Z,1492148021.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:42.060Z,1492148022.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:42.111Z,1492148022.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:42.468Z,1492148022.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:42.518Z,1492148022.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:42.861Z,1492148022.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:42.877Z,1492148022.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:43.258Z,1492148023.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:43.282Z,1492148023.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:43.658Z,1492148023.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:43.678Z,1492148023.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:44.062Z,1492148024.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:44.078Z,1492148024.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:44.449Z,1492148024.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:44.482Z,1492148024.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:44.866Z,1492148024.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:44.928Z,1492148024.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:45.254Z,1492148025.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:45.298Z,1492148025.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:45.661Z,1492148025.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:45.677Z,1492148025.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:46.066Z,1492148026.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:46.091Z,1492148026.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:46.452Z,1492148026.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:46.488Z,1492148026.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:46.852Z,1492148026.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:46.871Z,1492148026.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:47.279Z,1492148027.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:47.317Z,1492148027.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:47.652Z,1492148027.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:47.694Z,1492148027.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:48.071Z,1492148028.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:48.111Z,1492148028.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:48.463Z,1492148028.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:48.481Z,1492148028.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:48.857Z,1492148028.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:48.876Z,1492148028.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:49.265Z,1492148029.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:49.313Z,1492148029.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:49.670Z,1492148029.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:49.688Z,1492148029.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:50.076Z,1492148030.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:50.092Z,1492148030.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:50.449Z,1492148030.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:50.493Z,1492148030.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:50.881Z,1492148030.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:50.899Z,1492148030.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:51.255Z,1492148031.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:51.297Z,1492148031.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:51.655Z,1492148031.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:51.674Z,1492148031.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:52.062Z,1492148032.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:52.104Z,1492148032.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:52.459Z,1492148032.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:52.476Z,1492148032.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:52.860Z,1492148032.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:52.898Z,1492148032.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:53.261Z,1492148033.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:53.279Z,1492148033.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:53.660Z,1492148033.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:53.677Z,1492148033.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:54.066Z,1492148034.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:54.083Z,1492148034.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:54.472Z,1492148034.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:54.539Z,1492148034.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:54.850Z,1492148034.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:54.941Z,1492148034.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:55.267Z,1492148035.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:55.322Z,1492148035.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:55.661Z,1492148035.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:55.722Z,1492148035.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:56.059Z,1492148036.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:56.081Z,1492148036.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:56.460Z,1492148036.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:56.509Z,1492148036.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:56.858Z,1492148036.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:56.874Z,1492148036.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:57.250Z,1492148037.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:57.308Z,1492148037.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:57.650Z,1492148037.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:57.697Z,1492148037.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:58.079Z,1492148038.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:58.096Z,1492148038.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:58.451Z,1492148038.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:58.488Z,1492148038.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:58.851Z,1492148038.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:58.911Z,1492148038.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:59.261Z,1492148039.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:59.293Z,1492148039.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:33:59.662Z,1492148039.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:33:59.696Z,1492148039.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:00.100Z,1492148040.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:00.141Z,1492148040.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:00.454Z,1492148040.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:00.470Z,1492148040.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:00.855Z,1492148040.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:00.876Z,1492148040.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:01.258Z,1492148041.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:01.273Z,1492148041.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:01.669Z,1492148041.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:01.688Z,1492148041.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:02.085Z,1492148042.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:02.148Z,1492148042.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:02.456Z,1492148042.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:02.476Z,1492148042.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:02.854Z,1492148042.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:02.871Z,1492148042.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:03.016Z,1492148043.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:03.256Z,1492148043.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:03.272Z,1492148043.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:03.656Z,1492148043.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:03.672Z,1492148043.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:03.812Z,1492148043.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:04.063Z,1492148044.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:04.099Z,1492148044.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:04.226Z,1492148044.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:04.461Z,1492148044.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:04.497Z,1492148044.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:04.887Z,1492148044.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:04.918Z,1492148044.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:05.249Z,1492148045.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:05.285Z,1492148045.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:05.664Z,1492148045.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:05.680Z,1492148045.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:06.049Z,1492148046.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:06.122Z,1492148046.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:06.470Z,1492148046.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:06.486Z,1492148046.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:06.849Z,1492148046.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:06.877Z,1492148046.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:07.253Z,1492148047.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:07.324Z,1492148047.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:07.652Z,1492148047.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:07.677Z,1492148047.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:08.072Z,1492148048.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:08.088Z,1492148048.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:12.090Z,1492148052.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:12.183Z,1492148052.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:12.314Z,1492148052.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:12.338Z,1492148052.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:12.676Z,1492148052.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:12.766Z,1492148052.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:13.126Z,1492148053.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:13.141Z,1492148053.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:13.558Z,1492148053.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:13.711Z,1492148053.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:13.948Z,1492148053.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:14.065Z,1492148054.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:14.350Z,1492148054.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:14.458Z,1492148054.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:14.768Z,1492148054.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:14.865Z,1492148054.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:15.130Z,1492148055.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:15.271Z,1492148055.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:15.508Z,1492148055.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:15.556Z,1492148055.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:15.912Z,1492148055.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:15.958Z,1492148055.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:16.287Z,1492148056.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:16.334Z,1492148056.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:16.693Z,1492148056.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:16.722Z,1492148056.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:17.103Z,1492148057.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:17.126Z,1492148057.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:17.538Z,1492148057.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:17.565Z,1492148057.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:17.894Z,1492148057.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:17.970Z,1492148057.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:18.293Z,1492148058.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:18.326Z,1492148058.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:18.706Z,1492148058.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:18.737Z,1492148058.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:19.112Z,1492148059.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:19.134Z,1492148059.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:19.498Z,1492148059.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:19.530Z,1492148059.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:19.886Z,1492148059.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:19.938Z,1492148059.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:20.297Z,1492148060.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:20.344Z,1492148060.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:20.694Z,1492148060.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:20.733Z,1492148060.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:21.096Z,1492148061.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:21.127Z,1492148061.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:21.509Z,1492148061.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:21.540Z,1492148061.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:21.909Z,1492148061.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:21.959Z,1492148061.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:22.301Z,1492148062.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:22.319Z,1492148062.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:22.711Z,1492148062.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:22.747Z,1492148062.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:23.104Z,1492148063.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:23.123Z,1492148063.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:23.541Z,1492148063.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:23.570Z,1492148063.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:23.908Z,1492148063.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:23.988Z,1492148063.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:24.291Z,1492148064.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:24.334Z,1492148064.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:24.722Z,1492148064.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:24.744Z,1492148064.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:25.105Z,1492148065.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:25.142Z,1492148065.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:25.535Z,1492148065.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:25.598Z,1492148065.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:25.922Z,1492148065.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:25.943Z,1492148065.943 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:34:25.952Z,1492148065.952 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:34:25.952Z,1492148065.952 [BPC1](ERROR): Data Fault
2017-04-14T05:34:25.975Z,1492148065.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:26.078Z,1492148066.078 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:34:26.304Z,1492148066.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:26.374Z,1492148066.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:26.707Z,1492148066.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:26.752Z,1492148066.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:27.128Z,1492148067.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:27.208Z,1492148067.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:27.281Z,1492148067.281 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:34:27.281Z,1492148067.281 [BPC1] No Fault, FailCount= 1
2017-04-14T05:34:27.593Z,1492148067.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:27.686Z,1492148067.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:27.906Z,1492148067.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:27.975Z,1492148067.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:28.310Z,1492148068.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:28.333Z,1492148068.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:28.706Z,1492148068.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:28.749Z,1492148068.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:29.139Z,1492148069.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:29.155Z,1492148069.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:29.498Z,1492148069.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:29.528Z,1492148069.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:29.903Z,1492148069.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:29.936Z,1492148069.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:30.294Z,1492148070.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:30.310Z,1492148070.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:30.735Z,1492148070.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:30.766Z,1492148070.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:31.096Z,1492148071.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:31.124Z,1492148071.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:31.508Z,1492148071.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:31.528Z,1492148071.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:31.898Z,1492148071.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:31.915Z,1492148071.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:32.291Z,1492148072.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:32.319Z,1492148072.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:32.692Z,1492148072.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:32.732Z,1492148072.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:33.088Z,1492148073.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:33.120Z,1492148073.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:33.504Z,1492148073.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:33.557Z,1492148073.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:33.932Z,1492148073.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:33.978Z,1492148073.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:34.316Z,1492148074.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:34.332Z,1492148074.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:34.695Z,1492148074.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:34.723Z,1492148074.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:35.112Z,1492148075.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:35.130Z,1492148075.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:35.488Z,1492148075.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:35.526Z,1492148075.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:35.891Z,1492148075.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:35.943Z,1492148075.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:36.294Z,1492148076.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:36.334Z,1492148076.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:36.697Z,1492148076.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:36.726Z,1492148076.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:37.100Z,1492148077.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:37.142Z,1492148077.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:37.509Z,1492148077.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:37.535Z,1492148077.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:37.898Z,1492148077.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:37.936Z,1492148077.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:38.304Z,1492148078.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:38.344Z,1492148078.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:38.701Z,1492148078.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:38.730Z,1492148078.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:39.105Z,1492148079.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:39.121Z,1492148079.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:39.509Z,1492148079.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:39.526Z,1492148079.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:39.898Z,1492148079.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:39.961Z,1492148079.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:40.296Z,1492148080.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:40.376Z,1492148080.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:40.694Z,1492148080.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:40.710Z,1492148080.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:41.086Z,1492148081.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:41.131Z,1492148081.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:41.488Z,1492148081.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:41.539Z,1492148081.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:41.915Z,1492148081.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:41.973Z,1492148081.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:42.310Z,1492148082.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:42.370Z,1492148082.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:42.700Z,1492148082.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:42.727Z,1492148082.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:43.116Z,1492148083.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:43.133Z,1492148083.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:43.499Z,1492148083.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:43.530Z,1492148083.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:43.915Z,1492148083.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:43.987Z,1492148083.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:44.285Z,1492148084.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:44.338Z,1492148084.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:44.701Z,1492148084.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:44.718Z,1492148084.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:45.099Z,1492148085.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:45.199Z,1492148085.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:45.510Z,1492148085.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:45.528Z,1492148085.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:45.931Z,1492148085.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:45.970Z,1492148085.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:46.285Z,1492148086.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:46.339Z,1492148086.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:46.750Z,1492148086.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:46.789Z,1492148086.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:47.087Z,1492148087.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:47.114Z,1492148087.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:47.508Z,1492148087.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:47.601Z,1492148087.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:47.924Z,1492148087.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:47.987Z,1492148087.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:48.306Z,1492148088.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:48.383Z,1492148088.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:48.696Z,1492148088.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:48.762Z,1492148088.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:49.118Z,1492148089.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:49.211Z,1492148089.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:49.501Z,1492148089.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:49.555Z,1492148089.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:49.898Z,1492148089.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:49.988Z,1492148089.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:50.302Z,1492148090.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:50.352Z,1492148090.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:50.704Z,1492148090.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:50.750Z,1492148090.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:51.085Z,1492148091.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:51.126Z,1492148091.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:51.498Z,1492148091.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:51.562Z,1492148091.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:51.892Z,1492148091.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:51.940Z,1492148091.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:52.303Z,1492148092.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:52.355Z,1492148092.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:52.694Z,1492148092.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:52.710Z,1492148092.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:53.097Z,1492148093.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:53.130Z,1492148093.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:53.490Z,1492148093.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:53.582Z,1492148093.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:53.886Z,1492148093.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:53.994Z,1492148093.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:54.297Z,1492148094.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:54.337Z,1492148094.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:54.690Z,1492148094.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:54.741Z,1492148094.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:55.090Z,1492148095.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:55.108Z,1492148095.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:55.501Z,1492148095.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:55.521Z,1492148095.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:55.901Z,1492148095.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:55.953Z,1492148095.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:56.298Z,1492148096.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:56.317Z,1492148096.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:56.697Z,1492148096.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:56.758Z,1492148096.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:57.093Z,1492148097.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:57.148Z,1492148097.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:57.497Z,1492148097.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:57.512Z,1492148097.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:57.895Z,1492148097.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:57.911Z,1492148097.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:58.297Z,1492148098.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:58.313Z,1492148098.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:58.697Z,1492148098.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:58.712Z,1492148098.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:59.092Z,1492148099.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:59.122Z,1492148099.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:59.498Z,1492148099.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:59.513Z,1492148099.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:34:59.885Z,1492148099.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:34:59.912Z,1492148099.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:00.297Z,1492148100.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:00.318Z,1492148100.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:00.685Z,1492148100.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:00.711Z,1492148100.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:01.085Z,1492148101.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:01.111Z,1492148101.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:01.506Z,1492148101.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:01.524Z,1492148101.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:01.903Z,1492148101.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:01.919Z,1492148101.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:02.285Z,1492148102.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:02.315Z,1492148102.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:02.700Z,1492148102.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:02.722Z,1492148102.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:03.085Z,1492148103.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:03.118Z,1492148103.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:03.485Z,1492148103.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:03.523Z,1492148103.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:03.901Z,1492148103.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:03.924Z,1492148103.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:04.302Z,1492148104.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:04.324Z,1492148104.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:04.331Z,1492148104.331 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:04.331Z,1492148104.331 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:35:04.331Z,1492148104.331 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:35:04.364Z,1492148104.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:35:04.685Z,1492148104.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:04.718Z,1492148104.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:04.742Z,1492148104.742 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:35:04.742Z,1492148104.742 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:35:05.093Z,1492148105.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:05.136Z,1492148105.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:05.146Z,1492148105.146 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:35:05.146Z,1492148105.146 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:35:05.147Z,1492148105.147 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:35:05.485Z,1492148105.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:05.533Z,1492148105.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:05.888Z,1492148105.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:05.918Z,1492148105.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:06.298Z,1492148106.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:06.318Z,1492148106.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:06.692Z,1492148106.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:06.720Z,1492148106.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:07.092Z,1492148107.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:07.119Z,1492148107.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:07.485Z,1492148107.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:07.512Z,1492148107.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:07.901Z,1492148107.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:07.922Z,1492148107.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:08.297Z,1492148108.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:08.316Z,1492148108.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:13.317Z,1492148113.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:13.401Z,1492148113.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:13.486Z,1492148113.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:13.520Z,1492148113.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:13.889Z,1492148113.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:13.905Z,1492148113.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:14.292Z,1492148114.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:14.308Z,1492148114.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:14.686Z,1492148114.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:14.702Z,1492148114.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:15.089Z,1492148115.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:15.145Z,1492148115.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:15.488Z,1492148115.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:15.503Z,1492148115.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:15.894Z,1492148115.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:15.946Z,1492148115.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:16.285Z,1492148116.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:16.343Z,1492148116.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:16.691Z,1492148116.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:16.706Z,1492148116.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:17.084Z,1492148117.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:17.106Z,1492148117.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:17.486Z,1492148117.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:17.503Z,1492148117.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:17.894Z,1492148117.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:17.946Z,1492148117.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:18.280Z,1492148118.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:18.321Z,1492148118.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:18.678Z,1492148118.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:18.717Z,1492148118.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:19.086Z,1492148119.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:19.102Z,1492148119.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:19.484Z,1492148119.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:19.500Z,1492148119.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:19.885Z,1492148119.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:19.906Z,1492148119.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:20.284Z,1492148120.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:20.302Z,1492148120.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:20.687Z,1492148120.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:20.703Z,1492148120.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:21.086Z,1492148121.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:21.102Z,1492148121.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:21.487Z,1492148121.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:21.503Z,1492148121.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:21.885Z,1492148121.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:21.913Z,1492148121.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:22.277Z,1492148122.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:22.309Z,1492148122.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:22.680Z,1492148122.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:22.697Z,1492148122.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:23.081Z,1492148123.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:23.097Z,1492148123.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:23.488Z,1492148123.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:23.505Z,1492148123.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:23.889Z,1492148123.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:23.906Z,1492148123.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:24.293Z,1492148124.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:24.311Z,1492148124.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:24.695Z,1492148124.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:24.712Z,1492148124.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:25.077Z,1492148125.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:25.111Z,1492148125.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:25.477Z,1492148125.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:25.506Z,1492148125.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:25.877Z,1492148125.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:25.922Z,1492148125.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:26.287Z,1492148126.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:26.322Z,1492148126.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:26.693Z,1492148126.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:26.718Z,1492148126.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:27.077Z,1492148127.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:27.098Z,1492148127.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:27.492Z,1492148127.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:27.508Z,1492148127.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:27.892Z,1492148127.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:27.908Z,1492148127.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:28.292Z,1492148128.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:28.396Z,1492148128.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:28.671Z,1492148128.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:28.707Z,1492148128.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:29.077Z,1492148129.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:29.130Z,1492148129.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:29.477Z,1492148129.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:29.513Z,1492148129.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:29.899Z,1492148129.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:29.964Z,1492148129.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:30.277Z,1492148130.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:30.323Z,1492148130.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:30.677Z,1492148130.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:30.713Z,1492148130.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:31.081Z,1492148131.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:31.114Z,1492148131.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:31.477Z,1492148131.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:31.514Z,1492148131.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:31.881Z,1492148131.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:31.914Z,1492148131.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:32.277Z,1492148132.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:32.309Z,1492148132.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:32.684Z,1492148132.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:32.716Z,1492148132.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:33.085Z,1492148133.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:33.116Z,1492148133.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:33.483Z,1492148133.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:33.512Z,1492148133.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:33.893Z,1492148133.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:33.920Z,1492148133.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:34.281Z,1492148134.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:34.296Z,1492148134.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:34.678Z,1492148134.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:34.694Z,1492148134.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:35.086Z,1492148135.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:35.101Z,1492148135.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:35.494Z,1492148135.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:35.544Z,1492148135.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:35.888Z,1492148135.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:35.908Z,1492148135.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:36.284Z,1492148136.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:36.305Z,1492148136.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:36.691Z,1492148136.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:36.707Z,1492148136.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:37.089Z,1492148137.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:37.108Z,1492148137.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:37.477Z,1492148137.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:37.513Z,1492148137.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:37.885Z,1492148137.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:37.912Z,1492148137.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:38.277Z,1492148138.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:38.314Z,1492148138.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:38.677Z,1492148138.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:38.714Z,1492148138.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:39.085Z,1492148139.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:39.116Z,1492148139.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:39.490Z,1492148139.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:39.517Z,1492148139.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:39.885Z,1492148139.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:39.900Z,1492148139.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:40.286Z,1492148140.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:40.303Z,1492148140.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:40.687Z,1492148140.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:40.703Z,1492148140.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:41.083Z,1492148141.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:41.113Z,1492148141.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:41.488Z,1492148141.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:41.528Z,1492148141.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:41.886Z,1492148141.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:41.914Z,1492148141.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:42.283Z,1492148142.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:42.358Z,1492148142.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:42.685Z,1492148142.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:42.749Z,1492148142.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:43.090Z,1492148143.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:43.106Z,1492148143.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:43.486Z,1492148143.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:43.502Z,1492148143.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:43.877Z,1492148143.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:43.933Z,1492148143.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:44.281Z,1492148144.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:44.314Z,1492148144.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:44.677Z,1492148144.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:44.723Z,1492148144.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:45.081Z,1492148145.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:45.134Z,1492148145.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:45.485Z,1492148145.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:45.516Z,1492148145.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:45.889Z,1492148145.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:45.918Z,1492148145.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:46.279Z,1492148146.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:46.295Z,1492148146.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:46.689Z,1492148146.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:46.720Z,1492148146.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:47.077Z,1492148147.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:47.098Z,1492148147.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:47.487Z,1492148147.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:47.524Z,1492148147.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:47.885Z,1492148147.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:47.900Z,1492148147.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:48.289Z,1492148148.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:48.304Z,1492148148.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:48.685Z,1492148148.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:48.706Z,1492148148.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:49.084Z,1492148149.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:49.103Z,1492148149.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:49.485Z,1492148149.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:49.500Z,1492148149.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:49.899Z,1492148149.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:49.914Z,1492148149.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:50.289Z,1492148150.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:50.306Z,1492148150.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:50.685Z,1492148150.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:50.706Z,1492148150.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:51.089Z,1492148151.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:51.105Z,1492148151.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:51.477Z,1492148151.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:51.504Z,1492148151.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:51.918Z,1492148151.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:51.947Z,1492148151.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:51.947Z,1492148151.947 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:35:51.947Z,1492148151.947 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:35:51.954Z,1492148151.954 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:51.954Z,1492148151.954 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:35:51.954Z,1492148151.954 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:35:51.970Z,1492148151.970 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:35:51.970Z,1492148151.970 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:35:52.294Z,1492148152.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:52.327Z,1492148152.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:35:52.328Z,1492148152.328 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:35:52.328Z,1492148152.328 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:35:52.329Z,1492148152.329 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:35:52.677Z,1492148152.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:52.708Z,1492148152.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:35:52.708Z,1492148152.708 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:35:52.709Z,1492148152.709 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:35:52.718Z,1492148152.718 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:35:52.718Z,1492148152.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:35:52.718Z,1492148152.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:35:53.085Z,1492148153.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:53.119Z,1492148153.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:53.482Z,1492148153.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:53.526Z,1492148153.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:53.886Z,1492148153.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:53.906Z,1492148153.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:54.284Z,1492148154.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:54.312Z,1492148154.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:54.690Z,1492148154.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:54.713Z,1492148154.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:55.077Z,1492148155.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:55.110Z,1492148155.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:55.502Z,1492148155.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:55.528Z,1492148155.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:55.883Z,1492148155.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:55.929Z,1492148155.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:56.308Z,1492148156.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:56.354Z,1492148156.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:56.688Z,1492148156.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:56.705Z,1492148156.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:57.104Z,1492148157.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:57.293Z,1492148157.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:57.486Z,1492148157.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:57.533Z,1492148157.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:57.881Z,1492148157.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:57.930Z,1492148157.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:58.308Z,1492148158.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:58.335Z,1492148158.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:58.680Z,1492148158.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:58.733Z,1492148158.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:59.085Z,1492148159.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:59.139Z,1492148159.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:59.481Z,1492148159.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:59.498Z,1492148159.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:35:59.878Z,1492148159.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:35:59.921Z,1492148159.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:00.284Z,1492148160.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:00.318Z,1492148160.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:00.697Z,1492148160.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:00.725Z,1492148160.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:01.100Z,1492148161.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:01.117Z,1492148161.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:01.494Z,1492148161.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:01.529Z,1492148161.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:01.880Z,1492148161.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:01.916Z,1492148161.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:02.280Z,1492148162.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:02.327Z,1492148162.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:02.684Z,1492148162.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:02.701Z,1492148162.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:03.078Z,1492148163.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:03.093Z,1492148163.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:03.486Z,1492148163.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:03.502Z,1492148163.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:03.885Z,1492148163.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:03.913Z,1492148163.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:04.277Z,1492148164.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:04.312Z,1492148164.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:04.677Z,1492148164.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:04.714Z,1492148164.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:05.089Z,1492148165.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:05.105Z,1492148165.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:05.477Z,1492148165.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:05.507Z,1492148165.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:05.893Z,1492148165.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:05.909Z,1492148165.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:06.277Z,1492148166.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:06.310Z,1492148166.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:06.681Z,1492148166.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:06.708Z,1492148166.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:07.085Z,1492148167.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:07.112Z,1492148167.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:07.477Z,1492148167.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:07.511Z,1492148167.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:07.893Z,1492148167.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:07.913Z,1492148167.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:08.289Z,1492148168.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:08.310Z,1492148168.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:08.678Z,1492148168.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:08.712Z,1492148168.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:12.545Z,1492148172.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:12.613Z,1492148172.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:12.709Z,1492148172.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:12.751Z,1492148172.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:13.102Z,1492148173.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:13.118Z,1492148173.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:13.508Z,1492148173.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:13.528Z,1492148173.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:13.902Z,1492148173.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:13.918Z,1492148173.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:14.293Z,1492148174.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:14.316Z,1492148174.316 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:36:14.316Z,1492148174.316 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:36:14.316Z,1492148174.316 [BPC1](ERROR): Communications Fault
2017-04-14T05:36:14.326Z,1492148174.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:14.345Z,1492148174.345 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:36:14.693Z,1492148174.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:14.719Z,1492148174.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:15.093Z,1492148175.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:15.117Z,1492148175.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:15.492Z,1492148175.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:15.535Z,1492148175.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:15.554Z,1492148175.554 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:36:15.554Z,1492148175.554 [BPC1] No Fault, FailCount= 1
2017-04-14T05:36:15.893Z,1492148175.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:15.985Z,1492148175.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:16.293Z,1492148176.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:16.340Z,1492148176.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:16.710Z,1492148176.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:16.742Z,1492148176.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:17.098Z,1492148177.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:17.125Z,1492148177.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:17.498Z,1492148177.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:17.514Z,1492148177.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:17.902Z,1492148177.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:17.918Z,1492148177.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:18.302Z,1492148178.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:18.317Z,1492148178.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:18.698Z,1492148178.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:18.714Z,1492148178.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:19.093Z,1492148179.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:19.126Z,1492148179.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:19.493Z,1492148179.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:19.526Z,1492148179.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:19.897Z,1492148179.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:19.924Z,1492148179.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:20.293Z,1492148180.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:20.326Z,1492148180.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:20.690Z,1492148180.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:20.728Z,1492148180.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:21.097Z,1492148181.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:21.124Z,1492148181.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:21.513Z,1492148181.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:21.600Z,1492148181.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:21.893Z,1492148181.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:21.932Z,1492148181.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:22.297Z,1492148182.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:22.329Z,1492148182.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:22.695Z,1492148182.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:22.744Z,1492148182.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:23.098Z,1492148183.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:23.142Z,1492148183.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:23.601Z,1492148183.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:23.661Z,1492148183.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:23.899Z,1492148183.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:23.947Z,1492148183.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:24.303Z,1492148184.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:24.357Z,1492148184.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:24.703Z,1492148184.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:24.732Z,1492148184.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:25.093Z,1492148185.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:25.126Z,1492148185.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:25.501Z,1492148185.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:25.522Z,1492148185.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:25.902Z,1492148185.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:25.918Z,1492148185.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:26.303Z,1492148186.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:26.319Z,1492148186.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:26.731Z,1492148186.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:26.755Z,1492148186.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:27.101Z,1492148187.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:27.117Z,1492148187.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:27.513Z,1492148187.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:27.534Z,1492148187.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:27.928Z,1492148187.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:27.944Z,1492148187.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:28.297Z,1492148188.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:28.342Z,1492148188.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:28.705Z,1492148188.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:28.785Z,1492148188.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:29.101Z,1492148189.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:29.116Z,1492148189.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:29.505Z,1492148189.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:29.537Z,1492148189.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:29.907Z,1492148189.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:29.958Z,1492148189.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:30.302Z,1492148190.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:30.318Z,1492148190.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:30.696Z,1492148190.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:30.746Z,1492148190.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:31.098Z,1492148191.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:31.122Z,1492148191.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:31.501Z,1492148191.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:31.551Z,1492148191.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:31.893Z,1492148191.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:31.931Z,1492148191.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:32.307Z,1492148192.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:32.323Z,1492148192.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:32.710Z,1492148192.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:32.725Z,1492148192.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:33.097Z,1492148193.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:33.138Z,1492148193.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:33.517Z,1492148193.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:33.544Z,1492148193.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:33.903Z,1492148193.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:33.918Z,1492148193.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:34.295Z,1492148194.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:34.311Z,1492148194.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:34.698Z,1492148194.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:34.722Z,1492148194.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:35.103Z,1492148195.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:35.118Z,1492148195.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:35.499Z,1492148195.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:35.611Z,1492148195.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:35.893Z,1492148195.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:35.931Z,1492148195.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:36.293Z,1492148196.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:36.320Z,1492148196.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:36.690Z,1492148196.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:36.724Z,1492148196.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:37.097Z,1492148197.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:37.124Z,1492148197.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:37.493Z,1492148197.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:37.583Z,1492148197.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:37.913Z,1492148197.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:37.941Z,1492148197.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:38.303Z,1492148198.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:38.318Z,1492148198.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:38.700Z,1492148198.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:38.732Z,1492148198.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:39.104Z,1492148199.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:39.120Z,1492148199.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:39.496Z,1492148199.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:39.531Z,1492148199.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:39.894Z,1492148199.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:39.935Z,1492148199.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:40.294Z,1492148200.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:40.336Z,1492148200.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:40.693Z,1492148200.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:40.731Z,1492148200.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:41.093Z,1492148201.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:41.126Z,1492148201.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:41.493Z,1492148201.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:41.529Z,1492148201.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:41.903Z,1492148201.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:41.932Z,1492148201.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:42.305Z,1492148202.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:42.322Z,1492148202.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:42.706Z,1492148202.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:42.724Z,1492148202.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:43.093Z,1492148203.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:43.121Z,1492148203.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:43.493Z,1492148203.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:43.558Z,1492148203.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:43.898Z,1492148203.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:43.950Z,1492148203.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:44.298Z,1492148204.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:44.314Z,1492148204.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:44.718Z,1492148204.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:44.791Z,1492148204.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:45.108Z,1492148205.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:45.124Z,1492148205.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:45.499Z,1492148205.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:45.548Z,1492148205.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:45.901Z,1492148205.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:45.961Z,1492148205.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:46.307Z,1492148206.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:46.349Z,1492148206.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:46.705Z,1492148206.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:46.740Z,1492148206.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:47.104Z,1492148207.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:47.120Z,1492148207.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:47.502Z,1492148207.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:47.522Z,1492148207.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:47.893Z,1492148207.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:47.929Z,1492148207.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:48.293Z,1492148208.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:48.335Z,1492148208.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:48.693Z,1492148208.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:48.709Z,1492148208.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:49.093Z,1492148209.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:49.114Z,1492148209.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:49.558Z,1492148209.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:49.646Z,1492148209.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:49.893Z,1492148209.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:49.921Z,1492148209.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:50.293Z,1492148210.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:50.335Z,1492148210.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:50.693Z,1492148210.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:50.735Z,1492148210.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:51.093Z,1492148211.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:51.109Z,1492148211.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:51.545Z,1492148211.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:51.594Z,1492148211.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:51.893Z,1492148211.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:51.930Z,1492148211.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:52.293Z,1492148212.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:52.322Z,1492148212.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:52.698Z,1492148212.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:52.725Z,1492148212.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:53.105Z,1492148213.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:53.207Z,1492148213.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:53.496Z,1492148213.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:53.520Z,1492148213.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:53.909Z,1492148213.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:53.930Z,1492148213.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:54.297Z,1492148214.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:54.326Z,1492148214.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:54.697Z,1492148214.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:54.728Z,1492148214.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:55.093Z,1492148215.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:55.132Z,1492148215.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:55.509Z,1492148215.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:55.538Z,1492148215.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:55.905Z,1492148215.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:55.941Z,1492148215.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:56.303Z,1492148216.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:56.341Z,1492148216.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:56.701Z,1492148216.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:56.742Z,1492148216.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:57.102Z,1492148217.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:57.118Z,1492148217.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:57.493Z,1492148217.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:57.530Z,1492148217.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:57.914Z,1492148217.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:57.994Z,1492148217.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:58.293Z,1492148218.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:58.326Z,1492148218.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:58.700Z,1492148218.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:58.742Z,1492148218.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:59.101Z,1492148219.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:59.203Z,1492148219.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:59.494Z,1492148219.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:59.553Z,1492148219.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:36:59.900Z,1492148219.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:36:59.915Z,1492148219.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:00.308Z,1492148220.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:00.384Z,1492148220.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:00.702Z,1492148220.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:00.718Z,1492148220.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:01.093Z,1492148221.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:01.127Z,1492148221.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:01.504Z,1492148221.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:01.551Z,1492148221.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:01.894Z,1492148221.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:01.930Z,1492148221.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:02.332Z,1492148222.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:02.347Z,1492148222.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:02.704Z,1492148222.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:02.724Z,1492148222.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:03.095Z,1492148223.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:03.134Z,1492148223.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:03.589Z,1492148223.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:03.657Z,1492148223.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:03.898Z,1492148223.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:03.938Z,1492148223.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:04.301Z,1492148224.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:04.317Z,1492148224.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:04.701Z,1492148224.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:04.720Z,1492148224.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:05.105Z,1492148225.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:05.132Z,1492148225.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:05.559Z,1492148225.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:05.601Z,1492148225.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:05.904Z,1492148225.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:05.925Z,1492148225.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:06.297Z,1492148226.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:06.324Z,1492148226.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:06.693Z,1492148226.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:06.732Z,1492148226.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:07.097Z,1492148227.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:07.190Z,1492148227.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:07.505Z,1492148227.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:07.544Z,1492148227.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:07.898Z,1492148227.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:07.932Z,1492148227.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:08.298Z,1492148228.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:08.332Z,1492148228.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:08.703Z,1492148228.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:08.719Z,1492148228.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:14.900Z,1492148234.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:15.014Z,1492148235.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:15.122Z,1492148235.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:15.154Z,1492148235.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:15.474Z,1492148235.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:15.489Z,1492148235.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:15.872Z,1492148235.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:15.937Z,1492148235.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:16.282Z,1492148236.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:16.297Z,1492148236.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:16.670Z,1492148236.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:16.711Z,1492148236.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:17.077Z,1492148237.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:17.132Z,1492148237.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:17.536Z,1492148237.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:17.631Z,1492148237.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:17.869Z,1492148237.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:17.943Z,1492148237.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:18.270Z,1492148238.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:18.304Z,1492148238.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:18.672Z,1492148238.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:18.733Z,1492148238.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:19.074Z,1492148239.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:19.121Z,1492148239.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:19.566Z,1492148239.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:19.675Z,1492148239.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:19.900Z,1492148239.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:19.922Z,1492148239.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:20.285Z,1492148240.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:20.391Z,1492148240.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:20.677Z,1492148240.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:20.693Z,1492148240.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:21.091Z,1492148241.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:21.216Z,1492148241.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:21.483Z,1492148241.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:21.507Z,1492148241.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:21.889Z,1492148241.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:21.926Z,1492148241.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:22.276Z,1492148242.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:22.298Z,1492148242.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:22.676Z,1492148242.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:22.692Z,1492148242.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:23.077Z,1492148243.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:23.093Z,1492148243.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:23.469Z,1492148243.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:23.503Z,1492148243.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:23.868Z,1492148243.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:23.905Z,1492148243.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:24.269Z,1492148244.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:24.301Z,1492148244.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:24.669Z,1492148244.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:24.685Z,1492148244.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:25.078Z,1492148245.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:25.159Z,1492148245.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:25.485Z,1492148245.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:25.501Z,1492148245.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:25.869Z,1492148245.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:25.902Z,1492148245.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:26.269Z,1492148246.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:26.306Z,1492148246.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:26.677Z,1492148246.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:26.704Z,1492148246.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:27.080Z,1492148247.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:27.242Z,1492148247.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:27.482Z,1492148247.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:27.500Z,1492148247.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:27.883Z,1492148247.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:27.899Z,1492148247.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:28.286Z,1492148248.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:28.306Z,1492148248.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:28.688Z,1492148248.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:28.704Z,1492148248.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:29.091Z,1492148249.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:29.207Z,1492148249.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:29.481Z,1492148249.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:29.535Z,1492148249.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:29.917Z,1492148249.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:29.943Z,1492148249.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:30.277Z,1492148250.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:30.294Z,1492148250.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:30.682Z,1492148250.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:30.740Z,1492148250.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:31.081Z,1492148251.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:31.097Z,1492148251.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:31.502Z,1492148251.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:31.600Z,1492148251.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:31.886Z,1492148251.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:31.902Z,1492148251.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:32.301Z,1492148252.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:32.351Z,1492148252.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:32.666Z,1492148252.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:32.716Z,1492148252.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:33.100Z,1492148253.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:33.144Z,1492148253.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:33.525Z,1492148253.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:33.566Z,1492148253.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:33.870Z,1492148253.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:33.922Z,1492148253.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:34.282Z,1492148254.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:34.306Z,1492148254.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:34.705Z,1492148254.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:34.748Z,1492148254.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:35.094Z,1492148255.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:35.227Z,1492148255.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:35.479Z,1492148255.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:35.494Z,1492148255.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:35.877Z,1492148255.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:35.893Z,1492148255.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:36.278Z,1492148256.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:36.301Z,1492148256.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:36.680Z,1492148256.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:36.701Z,1492148256.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:37.102Z,1492148257.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:37.182Z,1492148257.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:37.475Z,1492148257.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:37.491Z,1492148257.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:37.883Z,1492148257.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:37.919Z,1492148257.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:38.280Z,1492148258.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:38.318Z,1492148258.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:38.681Z,1492148258.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:38.714Z,1492148258.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:39.102Z,1492148259.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:39.170Z,1492148259.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:39.489Z,1492148259.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:39.520Z,1492148259.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:39.886Z,1492148259.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:39.932Z,1492148259.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:40.287Z,1492148260.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:40.318Z,1492148260.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:40.681Z,1492148260.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:40.724Z,1492148260.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:41.089Z,1492148261.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:41.163Z,1492148261.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:41.481Z,1492148261.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:41.502Z,1492148261.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:41.893Z,1492148261.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:41.941Z,1492148261.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:42.271Z,1492148262.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:42.310Z,1492148262.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:42.689Z,1492148262.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:42.707Z,1492148262.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:43.071Z,1492148263.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:43.098Z,1492148263.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:43.476Z,1492148263.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:43.492Z,1492148263.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:43.880Z,1492148263.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:43.957Z,1492148263.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:44.285Z,1492148264.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:44.371Z,1492148264.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:44.669Z,1492148264.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:44.691Z,1492148264.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:45.079Z,1492148265.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:45.137Z,1492148265.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:45.520Z,1492148265.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:45.541Z,1492148265.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:45.902Z,1492148265.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:46.002Z,1492148266.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:46.284Z,1492148266.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:46.358Z,1492148266.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:46.697Z,1492148266.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:46.741Z,1492148266.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:47.071Z,1492148267.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:47.113Z,1492148267.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:47.511Z,1492148267.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:47.550Z,1492148267.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:47.876Z,1492148267.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:47.913Z,1492148267.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:48.295Z,1492148268.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:48.311Z,1492148268.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:48.681Z,1492148268.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:48.713Z,1492148268.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:49.138Z,1492148269.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:49.183Z,1492148269.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:49.485Z,1492148269.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:49.514Z,1492148269.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:49.870Z,1492148269.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:49.933Z,1492148269.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:50.269Z,1492148270.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:50.297Z,1492148270.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:50.669Z,1492148270.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:50.698Z,1492148270.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:51.139Z,1492148271.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:51.220Z,1492148271.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:51.471Z,1492148271.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:51.518Z,1492148271.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:51.875Z,1492148271.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:51.908Z,1492148271.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:52.291Z,1492148272.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:52.307Z,1492148272.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:52.674Z,1492148272.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:52.690Z,1492148272.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:53.146Z,1492148273.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:53.193Z,1492148273.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:53.480Z,1492148273.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:53.518Z,1492148273.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:53.889Z,1492148273.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:53.917Z,1492148273.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:54.300Z,1492148274.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:54.337Z,1492148274.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:54.690Z,1492148274.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:54.722Z,1492148274.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:55.145Z,1492148275.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:55.194Z,1492148275.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:55.496Z,1492148275.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:55.545Z,1492148275.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:55.895Z,1492148275.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:55.910Z,1492148275.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:56.353Z,1492148276.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:56.415Z,1492148276.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:56.706Z,1492148276.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:56.809Z,1492148276.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:57.072Z,1492148277.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:57.218Z,1492148277.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:57.491Z,1492148277.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:57.511Z,1492148277.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:57.901Z,1492148277.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:57.918Z,1492148277.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:58.285Z,1492148278.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:58.316Z,1492148278.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:58.683Z,1492148278.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:58.806Z,1492148278.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:59.080Z,1492148279.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:59.116Z,1492148279.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:59.474Z,1492148279.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:59.570Z,1492148279.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:37:59.871Z,1492148279.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:37:59.934Z,1492148279.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:00.282Z,1492148280.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:00.346Z,1492148280.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:00.676Z,1492148280.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:00.721Z,1492148280.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:01.078Z,1492148281.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:01.093Z,1492148281.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:01.477Z,1492148281.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:01.506Z,1492148281.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:01.885Z,1492148281.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:01.902Z,1492148281.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:02.277Z,1492148282.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:02.314Z,1492148282.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:02.680Z,1492148282.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:02.697Z,1492148282.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:03.137Z,1492148283.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:03.180Z,1492148283.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:03.474Z,1492148283.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:03.492Z,1492148283.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:03.879Z,1492148283.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:03.901Z,1492148283.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:04.281Z,1492148284.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:04.297Z,1492148284.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:04.686Z,1492148284.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:04.705Z,1492148284.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:05.108Z,1492148285.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:05.154Z,1492148285.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:05.192Z,1492148285.192 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:05.193Z,1492148285.193 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:38:05.193Z,1492148285.193 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:38:05.207Z,1492148285.207 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:38:05.475Z,1492148285.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:05.502Z,1492148285.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:05.554Z,1492148285.554 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:38:05.554Z,1492148285.554 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:38:05.884Z,1492148285.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:05.906Z,1492148285.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:05.911Z,1492148285.911 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:38:05.912Z,1492148285.912 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:38:05.912Z,1492148285.912 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:38:06.267Z,1492148286.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:06.299Z,1492148286.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:06.677Z,1492148286.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:06.711Z,1492148286.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:07.108Z,1492148287.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:07.163Z,1492148287.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:07.466Z,1492148287.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:07.497Z,1492148287.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:07.881Z,1492148287.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:07.899Z,1492148287.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:07.932Z,1492148287.932 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:38:07.932Z,1492148287.932 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:38:07.932Z,1492148287.932 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:38:07.932Z,1492148287.932 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:38:08.283Z,1492148288.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:08.299Z,1492148288.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:08.328Z,1492148288.328 [Default:CheckIn:D] Stopped
2017-04-14T05:38:08.328Z,1492148288.328 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:38:08.677Z,1492148288.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:08.694Z,1492148288.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:08.703Z,1492148288.704 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 132.050155 min 
2017-04-14T05:38:08.704Z,1492148288.704 [Default:CheckIn:E] Stopped
2017-04-14T05:38:08.704Z,1492148288.704 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:38:08.704Z,1492148288.704 [Default:CheckIn] Stopped
2017-04-14T05:38:08.704Z,1492148288.704 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:38:08.704Z,1492148288.704 [Default:CheckIn](INFO): Running loop #20
2017-04-14T05:38:08.705Z,1492148288.704 [Default:CheckIn] Running Loop=20
2017-04-14T05:38:08.705Z,1492148288.705 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:38:08.705Z,1492148288.705 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:38:09.113Z,1492148289.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:09.151Z,1492148289.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:14.805Z,1492148294.805 [NAL9602](INFO): Powering up
2017-04-14T05:38:14.838Z,1492148294.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:14.963Z,1492148294.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:15.148Z,1492148295.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:15.186Z,1492148295.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:15.520Z,1492148295.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:15.549Z,1492148295.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:15.879Z,1492148295.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:15.953Z,1492148295.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:16.284Z,1492148296.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:16.301Z,1492148296.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:16.689Z,1492148296.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:16.746Z,1492148296.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:17.122Z,1492148297.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:17.152Z,1492148297.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:17.470Z,1492148297.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:17.545Z,1492148297.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:17.869Z,1492148297.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:17.908Z,1492148297.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:18.269Z,1492148298.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:18.306Z,1492148298.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:18.673Z,1492148298.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:18.710Z,1492148298.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:19.117Z,1492148299.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:19.160Z,1492148299.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:19.482Z,1492148299.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:19.533Z,1492148299.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:19.866Z,1492148299.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:19.900Z,1492148299.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:20.271Z,1492148300.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:20.305Z,1492148300.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:20.673Z,1492148300.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:20.707Z,1492148300.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:21.171Z,1492148301.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:21.264Z,1492148301.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:21.476Z,1492148301.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:21.536Z,1492148301.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:21.882Z,1492148301.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:21.938Z,1492148301.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:22.280Z,1492148302.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:22.351Z,1492148302.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:22.669Z,1492148302.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:22.699Z,1492148302.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:23.089Z,1492148303.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:23.141Z,1492148303.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:23.473Z,1492148303.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:23.489Z,1492148303.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:23.999Z,1492148304.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:24.124Z,1492148304.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:24.351Z,1492148304.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:24.497Z,1492148304.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:24.735Z,1492148304.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:24.814Z,1492148304.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:25.155Z,1492148305.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:25.213Z,1492148305.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:25.558Z,1492148305.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:25.584Z,1492148305.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:25.905Z,1492148305.905 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:38:25.937Z,1492148305.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:25.986Z,1492148305.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:26.324Z,1492148306.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:26.367Z,1492148306.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:26.736Z,1492148306.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:26.757Z,1492148306.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:27.152Z,1492148307.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:27.170Z,1492148307.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:27.540Z,1492148307.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:27.571Z,1492148307.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:27.929Z,1492148307.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:27.973Z,1492148307.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:28.327Z,1492148308.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:28.343Z,1492148308.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:28.729Z,1492148308.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:28.746Z,1492148308.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:29.141Z,1492148309.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:29.199Z,1492148309.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:29.536Z,1492148309.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:29.634Z,1492148309.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:29.926Z,1492148309.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:29.964Z,1492148309.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:30.329Z,1492148310.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:30.386Z,1492148310.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:30.734Z,1492148310.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:30.775Z,1492148310.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:31.133Z,1492148311.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:31.184Z,1492148311.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:31.519Z,1492148311.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:31.591Z,1492148311.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:31.932Z,1492148311.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:31.953Z,1492148311.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:32.318Z,1492148312.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:32.352Z,1492148312.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:32.739Z,1492148312.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:32.763Z,1492148312.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:33.119Z,1492148313.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:33.157Z,1492148313.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:33.532Z,1492148313.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:33.582Z,1492148313.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:33.928Z,1492148313.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:33.961Z,1492148313.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:34.322Z,1492148314.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:34.338Z,1492148314.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:34.721Z,1492148314.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:34.742Z,1492148314.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:35.126Z,1492148315.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:35.150Z,1492148315.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:35.548Z,1492148315.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:35.585Z,1492148315.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:35.929Z,1492148315.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:35.945Z,1492148315.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:36.324Z,1492148316.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:36.346Z,1492148316.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:36.728Z,1492148316.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:36.747Z,1492148316.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:37.129Z,1492148317.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:37.157Z,1492148317.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:37.528Z,1492148317.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:37.544Z,1492148317.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:37.942Z,1492148317.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:37.966Z,1492148317.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:38.334Z,1492148318.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:38.350Z,1492148318.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:38.734Z,1492148318.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:38.759Z,1492148318.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:39.120Z,1492148319.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:39.206Z,1492148319.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:39.522Z,1492148319.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:39.557Z,1492148319.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:39.945Z,1492148319.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:39.961Z,1492148319.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:40.346Z,1492148320.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:40.381Z,1492148320.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:40.715Z,1492148320.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:40.754Z,1492148320.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:41.139Z,1492148321.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:41.156Z,1492148321.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:41.534Z,1492148321.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:41.568Z,1492148321.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:41.933Z,1492148321.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:41.960Z,1492148321.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:42.323Z,1492148322.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:42.360Z,1492148322.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:42.733Z,1492148322.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:42.818Z,1492148322.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:43.132Z,1492148323.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:43.158Z,1492148323.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:43.517Z,1492148323.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:43.602Z,1492148323.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:43.940Z,1492148323.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:43.956Z,1492148323.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:44.317Z,1492148324.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:44.354Z,1492148324.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:44.713Z,1492148324.713 [NAL9602](INFO): SBD MO Status=0, MOMSN=2113, MT Status=0, MTMSN=0
2017-04-14T05:38:44.713Z,1492148324.713 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:38:44.756Z,1492148324.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:44.809Z,1492148324.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:45.123Z,1492148325.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:45.177Z,1492148325.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:45.546Z,1492148325.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:45.601Z,1492148325.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:45.942Z,1492148325.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:46.001Z,1492148326.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:46.337Z,1492148326.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:46.353Z,1492148326.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:46.718Z,1492148326.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:46.783Z,1492148326.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:47.113Z,1492148327.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:47.141Z,1492148327.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:47.539Z,1492148327.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:47.558Z,1492148327.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:47.939Z,1492148327.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:47.955Z,1492148327.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:48.317Z,1492148328.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:48.350Z,1492148328.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:48.754Z,1492148328.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:48.807Z,1492148328.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:49.101Z,1492148329.101 [NAL9602](INFO): GPS fix at 20170414T053900: (36.802389, -121.787175)
2017-04-14T05:38:49.117Z,1492148329.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:49.179Z,1492148329.179 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:38:49.179Z,1492148329.180 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:38:49.536Z,1492148329.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:49.566Z,1492148329.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:49.566Z,1492148329.566 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:38:49.567Z,1492148329.566 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:38:49.574Z,1492148329.574 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:49.574Z,1492148329.574 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:38:49.574Z,1492148329.574 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:38:49.590Z,1492148329.589 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:38:49.590Z,1492148329.590 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:38:49.966Z,1492148329.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:50.015Z,1492148330.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:38:50.015Z,1492148330.016 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:38:50.016Z,1492148330.016 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:38:50.016Z,1492148330.016 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:38:50.366Z,1492148330.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:50.381Z,1492148330.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:38:50.382Z,1492148330.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:38:50.382Z,1492148330.382 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:38:50.387Z,1492148330.387 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:38:50.388Z,1492148330.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:38:50.388Z,1492148330.388 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:38:54.515Z,1492148334.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:54.532Z,1492148334.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:54.621Z,1492148334.621 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0084.lzma
2017-04-14T05:38:54.651Z,1492148334.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:54.706Z,1492148334.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:55.048Z,1492148335.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:55.082Z,1492148335.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:55.422Z,1492148335.422 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0084.lzma.bak
2017-04-14T05:38:55.422Z,1492148335.422 [DataOverHttps](INFO): SBD MOMSN=4885233
2017-04-14T05:38:55.476Z,1492148335.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:55.530Z,1492148335.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:55.857Z,1492148335.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:55.890Z,1492148335.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:38:56.242Z,1492148336.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:38:56.258Z,1492148336.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:00.042Z,1492148340.042 [NAL9602](INFO): Powering down
2017-04-14T05:39:00.061Z,1492148340.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:00.145Z,1492148340.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:00.248Z,1492148340.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:00.301Z,1492148340.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:00.625Z,1492148340.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:00.664Z,1492148340.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:01.052Z,1492148341.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:01.122Z,1492148341.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:01.437Z,1492148341.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:01.482Z,1492148341.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:01.825Z,1492148341.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:01.882Z,1492148341.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:02.226Z,1492148342.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:02.286Z,1492148342.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:02.629Z,1492148342.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:02.644Z,1492148342.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:07.374Z,1492148347.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:07.390Z,1492148347.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:07.476Z,1492148347.476 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0085.lzma
2017-04-14T05:39:07.502Z,1492148347.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:07.530Z,1492148347.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:07.885Z,1492148347.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:07.906Z,1492148347.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:08.250Z,1492148348.250 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0085.lzma.bak
2017-04-14T05:39:08.250Z,1492148348.250 [DataOverHttps](INFO): SBD MOMSN=4885236
2017-04-14T05:39:08.282Z,1492148348.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:08.312Z,1492148348.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:08.743Z,1492148348.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:08.769Z,1492148348.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:08.802Z,1492148348.802 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:39:08.802Z,1492148348.802 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:39:08.802Z,1492148348.802 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:39:09.079Z,1492148349.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:09.118Z,1492148349.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:14.690Z,1492148354.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:14.795Z,1492148354.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:14.885Z,1492148354.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:14.992Z,1492148354.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:15.289Z,1492148355.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:15.349Z,1492148355.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:15.673Z,1492148355.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:15.699Z,1492148355.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:16.066Z,1492148356.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:16.114Z,1492148356.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:16.479Z,1492148356.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:16.547Z,1492148356.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:16.898Z,1492148356.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:16.998Z,1492148356.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:17.281Z,1492148357.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:17.313Z,1492148357.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:17.683Z,1492148357.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:17.698Z,1492148357.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:18.079Z,1492148358.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:18.094Z,1492148358.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:18.481Z,1492148358.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:18.497Z,1492148358.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:18.878Z,1492148358.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:18.894Z,1492148358.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:19.271Z,1492148359.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:19.309Z,1492148359.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:19.669Z,1492148359.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:19.701Z,1492148359.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:20.080Z,1492148360.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:20.118Z,1492148360.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:20.470Z,1492148360.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:20.486Z,1492148360.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:20.872Z,1492148360.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:20.902Z,1492148360.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:21.290Z,1492148361.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:21.322Z,1492148361.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:21.678Z,1492148361.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:21.693Z,1492148361.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:22.078Z,1492148362.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:22.094Z,1492148362.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:22.477Z,1492148362.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:22.492Z,1492148362.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:22.877Z,1492148362.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:22.893Z,1492148362.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:23.366Z,1492148363.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:23.405Z,1492148363.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:23.677Z,1492148363.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:23.703Z,1492148363.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:24.071Z,1492148364.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:24.087Z,1492148364.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:24.477Z,1492148364.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:24.498Z,1492148364.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:24.881Z,1492148364.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:24.896Z,1492148364.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:25.341Z,1492148365.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:25.382Z,1492148365.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:25.677Z,1492148365.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:25.698Z,1492148365.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:26.085Z,1492148366.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:26.106Z,1492148366.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:26.481Z,1492148366.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:26.497Z,1492148366.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:26.869Z,1492148366.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:26.965Z,1492148366.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:27.281Z,1492148367.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:27.317Z,1492148367.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:27.677Z,1492148367.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:27.692Z,1492148367.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:28.076Z,1492148368.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:28.092Z,1492148368.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:28.475Z,1492148368.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:28.553Z,1492148368.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:28.878Z,1492148368.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:28.988Z,1492148368.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:29.269Z,1492148369.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:29.285Z,1492148369.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:29.677Z,1492148369.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:29.758Z,1492148369.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:30.081Z,1492148370.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:30.117Z,1492148370.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:30.477Z,1492148370.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:30.534Z,1492148370.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:30.881Z,1492148370.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:30.966Z,1492148370.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:31.269Z,1492148371.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:31.303Z,1492148371.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:31.669Z,1492148371.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:31.696Z,1492148371.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:32.069Z,1492148372.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:32.105Z,1492148372.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:32.473Z,1492148372.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:32.499Z,1492148372.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:32.873Z,1492148372.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:32.973Z,1492148372.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:33.278Z,1492148373.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:33.302Z,1492148373.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:33.676Z,1492148373.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:33.698Z,1492148373.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:34.071Z,1492148374.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:34.087Z,1492148374.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:34.477Z,1492148374.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:34.498Z,1492148374.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:34.880Z,1492148374.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:34.896Z,1492148374.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:35.269Z,1492148375.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:35.302Z,1492148375.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:35.673Z,1492148375.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:35.700Z,1492148375.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:36.069Z,1492148376.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:36.105Z,1492148376.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:36.477Z,1492148376.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:36.504Z,1492148376.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:36.869Z,1492148376.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:36.885Z,1492148376.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:37.316Z,1492148377.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:37.376Z,1492148377.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:37.674Z,1492148377.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:37.690Z,1492148377.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:38.073Z,1492148378.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:38.094Z,1492148378.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:38.478Z,1492148378.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:38.498Z,1492148378.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:38.881Z,1492148378.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:38.897Z,1492148378.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:39.318Z,1492148379.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:39.382Z,1492148379.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:39.669Z,1492148379.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:39.706Z,1492148379.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:40.069Z,1492148380.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:40.105Z,1492148380.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:40.469Z,1492148380.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:40.497Z,1492148380.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:40.869Z,1492148380.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:41.008Z,1492148381.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:41.277Z,1492148381.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:41.293Z,1492148381.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:41.683Z,1492148381.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:41.701Z,1492148381.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:42.071Z,1492148382.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:42.105Z,1492148382.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:42.486Z,1492148382.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:42.502Z,1492148382.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:42.869Z,1492148382.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:43.062Z,1492148383.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:43.274Z,1492148383.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:43.323Z,1492148383.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:43.674Z,1492148383.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:43.690Z,1492148383.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:44.075Z,1492148384.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:44.091Z,1492148384.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:44.475Z,1492148384.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:44.526Z,1492148384.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:44.895Z,1492148384.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:44.992Z,1492148384.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:45.274Z,1492148385.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:45.354Z,1492148385.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:45.678Z,1492148385.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:45.719Z,1492148385.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:46.074Z,1492148386.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:46.105Z,1492148386.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:46.486Z,1492148386.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:46.520Z,1492148386.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:46.912Z,1492148386.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:46.976Z,1492148386.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:47.275Z,1492148387.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:47.292Z,1492148387.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:47.677Z,1492148387.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:47.698Z,1492148387.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:48.077Z,1492148388.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:48.094Z,1492148388.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:48.476Z,1492148388.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:48.498Z,1492148388.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:48.876Z,1492148388.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:48.900Z,1492148388.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:49.270Z,1492148389.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:49.306Z,1492148389.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:49.679Z,1492148389.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:49.695Z,1492148389.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:50.077Z,1492148390.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:50.101Z,1492148390.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:50.478Z,1492148390.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:50.494Z,1492148390.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:50.867Z,1492148390.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:50.905Z,1492148390.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:51.305Z,1492148391.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:51.362Z,1492148391.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:51.673Z,1492148391.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:51.706Z,1492148391.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:52.066Z,1492148392.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:52.082Z,1492148392.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:52.469Z,1492148392.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:52.491Z,1492148392.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:52.875Z,1492148392.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:52.890Z,1492148392.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:53.308Z,1492148393.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:53.340Z,1492148393.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:53.677Z,1492148393.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:53.694Z,1492148393.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:54.076Z,1492148394.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:54.092Z,1492148394.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:54.478Z,1492148394.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:54.495Z,1492148394.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:54.928Z,1492148394.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:55.002Z,1492148395.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:55.273Z,1492148395.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:55.306Z,1492148395.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:55.690Z,1492148395.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:55.729Z,1492148395.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:56.132Z,1492148396.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:56.225Z,1492148396.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:56.516Z,1492148396.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:56.565Z,1492148396.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:56.924Z,1492148396.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:56.993Z,1492148396.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:57.277Z,1492148397.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:57.307Z,1492148397.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:57.669Z,1492148397.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:57.789Z,1492148397.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:58.068Z,1492148398.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:58.093Z,1492148398.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:58.477Z,1492148398.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:58.526Z,1492148398.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:59.000Z,1492148399.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:59.085Z,1492148399.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:59.273Z,1492148399.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:59.342Z,1492148399.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:39:59.689Z,1492148399.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:39:59.738Z,1492148399.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:00.069Z,1492148400.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:00.111Z,1492148400.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:00.473Z,1492148400.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:00.497Z,1492148400.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:00.957Z,1492148400.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:00.994Z,1492148400.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:01.290Z,1492148401.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:01.322Z,1492148401.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:01.707Z,1492148401.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:01.723Z,1492148401.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:02.100Z,1492148402.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:02.145Z,1492148402.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:02.473Z,1492148402.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:02.506Z,1492148402.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:02.869Z,1492148402.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:02.946Z,1492148402.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:03.272Z,1492148403.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:03.300Z,1492148403.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:03.677Z,1492148403.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:03.693Z,1492148403.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:04.078Z,1492148404.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:04.094Z,1492148404.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:04.469Z,1492148404.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:04.504Z,1492148404.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:04.869Z,1492148404.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:04.896Z,1492148404.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:05.292Z,1492148405.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:05.361Z,1492148405.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:05.673Z,1492148405.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:05.706Z,1492148405.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:06.072Z,1492148406.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:06.106Z,1492148406.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:06.477Z,1492148406.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:06.504Z,1492148406.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:06.869Z,1492148406.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:06.905Z,1492148406.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:07.279Z,1492148407.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:07.322Z,1492148407.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:07.674Z,1492148407.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:07.690Z,1492148407.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:08.074Z,1492148408.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:08.090Z,1492148408.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:08.477Z,1492148408.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:08.493Z,1492148408.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:08.916Z,1492148408.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:08.974Z,1492148408.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:09.280Z,1492148409.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:09.312Z,1492148409.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:12.657Z,1492148412.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:12.715Z,1492148412.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:12.817Z,1492148412.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:12.910Z,1492148412.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:13.184Z,1492148413.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:13.220Z,1492148413.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:13.608Z,1492148413.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:13.670Z,1492148413.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:13.988Z,1492148413.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:14.016Z,1492148414.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:14.386Z,1492148414.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:14.449Z,1492148414.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:14.789Z,1492148414.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:14.899Z,1492148414.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:15.188Z,1492148415.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:15.207Z,1492148415.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:15.594Z,1492148415.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:15.610Z,1492148415.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:15.991Z,1492148415.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:16.006Z,1492148416.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:16.392Z,1492148416.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:16.408Z,1492148416.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:16.790Z,1492148416.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:16.807Z,1492148416.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:17.181Z,1492148417.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:17.197Z,1492148417.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:17.591Z,1492148417.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:17.620Z,1492148417.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:17.989Z,1492148417.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:18.011Z,1492148418.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:18.391Z,1492148418.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:18.409Z,1492148418.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:18.792Z,1492148418.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:18.808Z,1492148418.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:19.242Z,1492148419.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:19.321Z,1492148419.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:19.581Z,1492148419.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:19.608Z,1492148419.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:19.981Z,1492148419.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:20.013Z,1492148420.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:20.381Z,1492148420.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:20.417Z,1492148420.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:20.781Z,1492148420.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:20.820Z,1492148420.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:21.262Z,1492148421.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:21.292Z,1492148421.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:21.589Z,1492148421.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:21.623Z,1492148421.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:21.981Z,1492148421.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:22.024Z,1492148422.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:22.385Z,1492148422.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:22.424Z,1492148422.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:22.781Z,1492148422.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:22.796Z,1492148422.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:23.193Z,1492148423.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:23.210Z,1492148423.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:23.589Z,1492148423.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:23.605Z,1492148423.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:23.988Z,1492148423.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:24.009Z,1492148424.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:24.394Z,1492148424.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:24.410Z,1492148424.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:24.781Z,1492148424.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:24.868Z,1492148424.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:25.184Z,1492148425.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:25.209Z,1492148425.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:25.581Z,1492148425.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:25.648Z,1492148425.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:25.978Z,1492148425.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:26.036Z,1492148426.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:26.384Z,1492148426.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:26.411Z,1492148426.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:26.781Z,1492148426.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:26.897Z,1492148426.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:27.181Z,1492148427.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:27.209Z,1492148427.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:27.584Z,1492148427.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:27.632Z,1492148427.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:27.981Z,1492148427.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:28.032Z,1492148428.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:28.385Z,1492148428.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:28.417Z,1492148428.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:28.789Z,1492148428.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:28.872Z,1492148428.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:29.189Z,1492148429.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:29.205Z,1492148429.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:29.581Z,1492148429.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:29.614Z,1492148429.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:29.981Z,1492148429.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:30.015Z,1492148430.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:30.385Z,1492148430.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:30.412Z,1492148430.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:30.778Z,1492148430.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:30.802Z,1492148430.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:31.181Z,1492148431.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:31.196Z,1492148431.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:31.589Z,1492148431.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:31.636Z,1492148431.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:31.982Z,1492148431.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:31.998Z,1492148431.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:32.385Z,1492148432.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:32.401Z,1492148432.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:32.788Z,1492148432.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:32.803Z,1492148432.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:33.222Z,1492148433.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:33.295Z,1492148433.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:33.596Z,1492148433.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:33.617Z,1492148433.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:33.985Z,1492148433.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:34.011Z,1492148434.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:34.385Z,1492148434.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:34.412Z,1492148434.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:34.781Z,1492148434.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:34.817Z,1492148434.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:35.260Z,1492148435.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:35.315Z,1492148435.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:35.586Z,1492148435.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:35.610Z,1492148435.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:35.989Z,1492148435.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:36.026Z,1492148436.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:36.389Z,1492148436.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:36.426Z,1492148436.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:36.785Z,1492148436.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:36.883Z,1492148436.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:37.189Z,1492148437.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:37.205Z,1492148437.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:37.602Z,1492148437.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:37.618Z,1492148437.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:37.981Z,1492148437.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:38.014Z,1492148438.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:38.381Z,1492148438.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:38.459Z,1492148438.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:38.781Z,1492148438.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:38.925Z,1492148438.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:39.181Z,1492148439.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:39.213Z,1492148439.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:39.583Z,1492148439.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:39.638Z,1492148439.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:40.001Z,1492148440.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:40.022Z,1492148440.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:40.381Z,1492148440.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:40.432Z,1492148440.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:40.781Z,1492148440.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:40.910Z,1492148440.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:41.187Z,1492148441.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:41.208Z,1492148441.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:41.590Z,1492148441.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:41.605Z,1492148441.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:41.989Z,1492148441.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:42.010Z,1492148442.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:42.394Z,1492148442.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:42.410Z,1492148442.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:42.798Z,1492148442.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:42.886Z,1492148442.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:43.179Z,1492148443.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:43.210Z,1492148443.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:43.590Z,1492148443.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:43.610Z,1492148443.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:43.992Z,1492148443.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:44.008Z,1492148444.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:44.388Z,1492148444.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:44.417Z,1492148444.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:44.797Z,1492148444.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:44.812Z,1492148444.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:45.181Z,1492148445.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:45.213Z,1492148445.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:45.581Z,1492148445.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:45.606Z,1492148445.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:45.981Z,1492148445.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:46.015Z,1492148446.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:46.381Z,1492148446.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:46.397Z,1492148446.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:46.786Z,1492148446.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:46.823Z,1492148446.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:47.212Z,1492148447.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:47.237Z,1492148447.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:47.593Z,1492148447.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:47.625Z,1492148447.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:47.989Z,1492148447.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:48.004Z,1492148448.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:48.387Z,1492148448.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:48.403Z,1492148448.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:48.789Z,1492148448.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:48.804Z,1492148448.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:49.207Z,1492148449.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:49.271Z,1492148449.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:49.592Z,1492148449.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:49.616Z,1492148449.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:49.981Z,1492148449.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:50.014Z,1492148450.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:50.401Z,1492148450.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:50.422Z,1492148450.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:50.861Z,1492148450.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:50.912Z,1492148450.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:51.185Z,1492148451.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:51.281Z,1492148451.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:51.592Z,1492148451.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:51.608Z,1492148451.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:51.990Z,1492148451.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:52.045Z,1492148452.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:52.390Z,1492148452.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:52.406Z,1492148452.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:52.842Z,1492148452.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:52.904Z,1492148452.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:53.186Z,1492148453.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:53.213Z,1492148453.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:53.582Z,1492148453.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:53.644Z,1492148453.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:53.989Z,1492148453.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:54.033Z,1492148454.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:54.390Z,1492148454.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:54.421Z,1492148454.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:54.841Z,1492148454.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:54.893Z,1492148454.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:55.189Z,1492148455.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:55.207Z,1492148455.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:55.588Z,1492148455.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:55.605Z,1492148455.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:55.989Z,1492148455.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:56.006Z,1492148456.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:56.389Z,1492148456.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:56.405Z,1492148456.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:56.852Z,1492148456.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:56.897Z,1492148456.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:57.188Z,1492148457.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:57.234Z,1492148457.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:57.598Z,1492148457.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:57.613Z,1492148457.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:57.981Z,1492148457.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:58.014Z,1492148458.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:58.393Z,1492148458.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:58.408Z,1492148458.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:58.781Z,1492148458.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:58.880Z,1492148458.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:59.186Z,1492148459.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:59.201Z,1492148459.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:59.586Z,1492148459.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:40:59.613Z,1492148459.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:40:59.993Z,1492148459.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:00.008Z,1492148460.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:00.389Z,1492148460.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:00.404Z,1492148460.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:00.781Z,1492148460.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:00.814Z,1492148460.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:01.194Z,1492148461.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:01.218Z,1492148461.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:01.581Z,1492148461.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:01.614Z,1492148461.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:01.997Z,1492148461.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:02.018Z,1492148462.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:02.381Z,1492148462.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:02.413Z,1492148462.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:02.786Z,1492148462.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:02.802Z,1492148462.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:03.192Z,1492148463.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:03.216Z,1492148463.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:03.589Z,1492148463.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:03.604Z,1492148463.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:03.981Z,1492148463.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:04.010Z,1492148464.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:04.389Z,1492148464.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:04.447Z,1492148464.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:04.868Z,1492148464.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:04.919Z,1492148464.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:05.186Z,1492148465.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:05.214Z,1492148465.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:05.587Z,1492148465.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:05.622Z,1492148465.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:05.986Z,1492148465.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:06.094Z,1492148466.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:06.101Z,1492148466.101 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:06.101Z,1492148466.101 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:41:06.101Z,1492148466.101 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:41:06.154Z,1492148466.154 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:41:06.389Z,1492148466.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:06.405Z,1492148466.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:06.481Z,1492148466.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:41:06.481Z,1492148466.481 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:41:06.841Z,1492148466.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:06.890Z,1492148466.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:06.905Z,1492148466.905 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:41:06.905Z,1492148466.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:41:06.905Z,1492148466.905 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:41:07.193Z,1492148467.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:07.250Z,1492148467.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:07.586Z,1492148467.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:07.618Z,1492148467.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:07.989Z,1492148467.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:08.005Z,1492148468.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:08.381Z,1492148468.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:08.414Z,1492148468.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:08.833Z,1492148468.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:08.895Z,1492148468.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:09.181Z,1492148469.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:09.197Z,1492148469.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:09.592Z,1492148469.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:09.620Z,1492148469.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:14.609Z,1492148474.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:14.648Z,1492148474.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:14.749Z,1492148474.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:14.793Z,1492148474.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:15.196Z,1492148475.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:15.261Z,1492148475.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:15.525Z,1492148475.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:15.552Z,1492148475.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:15.921Z,1492148475.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:15.948Z,1492148475.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:16.347Z,1492148476.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:16.363Z,1492148476.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:16.717Z,1492148476.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:16.750Z,1492148476.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:17.171Z,1492148477.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:17.216Z,1492148477.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:17.525Z,1492148477.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:17.558Z,1492148477.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:17.918Z,1492148477.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:17.978Z,1492148477.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:18.317Z,1492148478.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:18.371Z,1492148478.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:18.752Z,1492148478.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:18.820Z,1492148478.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:19.126Z,1492148479.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:19.141Z,1492148479.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:19.524Z,1492148479.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:19.582Z,1492148479.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:19.940Z,1492148479.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:19.989Z,1492148479.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:20.318Z,1492148480.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:20.358Z,1492148480.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:20.718Z,1492148480.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:20.880Z,1492148480.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:21.117Z,1492148481.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:21.138Z,1492148481.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:21.518Z,1492148481.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:21.534Z,1492148481.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:21.930Z,1492148481.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:21.954Z,1492148481.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:22.317Z,1492148482.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:22.344Z,1492148482.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:22.717Z,1492148482.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:22.862Z,1492148482.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:23.124Z,1492148483.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:23.140Z,1492148483.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:23.528Z,1492148483.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:23.544Z,1492148483.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:23.927Z,1492148483.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:23.950Z,1492148483.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:24.331Z,1492148484.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:24.347Z,1492148484.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:24.756Z,1492148484.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:24.819Z,1492148484.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:25.115Z,1492148485.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:25.151Z,1492148485.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:25.517Z,1492148485.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:25.553Z,1492148485.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:25.918Z,1492148485.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:25.968Z,1492148485.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:26.317Z,1492148486.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:26.357Z,1492148486.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:26.718Z,1492148486.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:26.735Z,1492148486.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:27.122Z,1492148487.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:27.161Z,1492148487.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:27.530Z,1492148487.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:27.546Z,1492148487.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:27.930Z,1492148487.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:27.947Z,1492148487.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:28.325Z,1492148488.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:28.341Z,1492148488.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:28.725Z,1492148488.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:28.742Z,1492148488.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:29.150Z,1492148489.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:29.195Z,1492148489.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:29.521Z,1492148489.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:29.549Z,1492148489.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:29.917Z,1492148489.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:29.955Z,1492148489.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:30.317Z,1492148490.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:30.350Z,1492148490.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:30.737Z,1492148490.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:30.753Z,1492148490.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:31.146Z,1492148491.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:31.240Z,1492148491.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:31.521Z,1492148491.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:31.580Z,1492148491.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:31.924Z,1492148491.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:31.956Z,1492148491.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:32.324Z,1492148492.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:32.374Z,1492148492.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:32.780Z,1492148492.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:32.841Z,1492148492.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:33.124Z,1492148493.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:33.178Z,1492148493.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:33.530Z,1492148493.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:33.575Z,1492148493.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:33.928Z,1492148493.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:33.945Z,1492148493.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:34.325Z,1492148494.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:34.340Z,1492148494.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:34.770Z,1492148494.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:34.801Z,1492148494.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:35.117Z,1492148495.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:35.147Z,1492148495.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:35.517Z,1492148495.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:35.555Z,1492148495.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:35.921Z,1492148495.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:35.947Z,1492148495.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:36.317Z,1492148496.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:36.333Z,1492148496.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:36.798Z,1492148496.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:36.832Z,1492148496.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:37.125Z,1492148497.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:37.176Z,1492148497.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:37.529Z,1492148497.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:37.566Z,1492148497.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:37.926Z,1492148497.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:37.942Z,1492148497.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:38.326Z,1492148498.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:38.343Z,1492148498.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:38.797Z,1492148498.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:38.843Z,1492148498.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:39.117Z,1492148499.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:39.144Z,1492148499.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:39.517Z,1492148499.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:39.556Z,1492148499.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:39.917Z,1492148499.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:39.954Z,1492148499.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:40.321Z,1492148500.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:40.354Z,1492148500.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:40.725Z,1492148500.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:40.821Z,1492148500.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:41.126Z,1492148501.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:41.145Z,1492148501.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:41.517Z,1492148501.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:41.553Z,1492148501.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:41.919Z,1492148501.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:41.950Z,1492148501.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:42.321Z,1492148502.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:42.350Z,1492148502.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:42.737Z,1492148502.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:42.752Z,1492148502.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:43.123Z,1492148503.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:43.182Z,1492148503.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:43.525Z,1492148503.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:43.557Z,1492148503.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:43.933Z,1492148503.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:43.962Z,1492148503.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:44.322Z,1492148504.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:44.412Z,1492148504.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:44.721Z,1492148504.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:44.737Z,1492148504.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:45.131Z,1492148505.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:45.194Z,1492148505.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:45.530Z,1492148505.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:45.545Z,1492148505.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:45.923Z,1492148505.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:45.981Z,1492148505.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:46.326Z,1492148506.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:46.368Z,1492148506.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:46.774Z,1492148506.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:46.842Z,1492148506.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:47.120Z,1492148507.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:47.148Z,1492148507.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:47.526Z,1492148507.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:47.541Z,1492148507.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:47.933Z,1492148507.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:47.949Z,1492148507.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:48.318Z,1492148508.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:48.355Z,1492148508.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:48.768Z,1492148508.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:48.820Z,1492148508.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:49.139Z,1492148509.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:49.154Z,1492148509.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:49.517Z,1492148509.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:49.553Z,1492148509.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:49.921Z,1492148509.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:49.960Z,1492148509.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:50.323Z,1492148510.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:50.359Z,1492148510.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:50.768Z,1492148510.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:50.815Z,1492148510.815 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:50.816Z,1492148510.816 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:41:50.816Z,1492148510.816 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:41:50.822Z,1492148510.822 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:50.822Z,1492148510.822 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:41:50.822Z,1492148510.822 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:41:50.883Z,1492148510.883 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:41:50.895Z,1492148510.895 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:41:51.134Z,1492148511.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:51.202Z,1492148511.202 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:41:51.202Z,1492148511.202 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:41:51.219Z,1492148511.219 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:41:51.219Z,1492148511.219 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:41:51.519Z,1492148511.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:51.546Z,1492148511.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:41:51.547Z,1492148511.547 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:41:51.551Z,1492148511.551 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:41:51.560Z,1492148511.560 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:41:51.561Z,1492148511.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:41:51.561Z,1492148511.561 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:41:51.914Z,1492148511.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:51.947Z,1492148511.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:52.321Z,1492148512.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:52.348Z,1492148512.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:52.769Z,1492148512.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:52.817Z,1492148512.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:53.123Z,1492148513.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:53.169Z,1492148513.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:53.525Z,1492148513.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:53.554Z,1492148513.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:53.929Z,1492148513.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:53.964Z,1492148513.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:54.330Z,1492148514.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:54.362Z,1492148514.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:54.766Z,1492148514.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:54.860Z,1492148514.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:55.129Z,1492148515.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:55.178Z,1492148515.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:55.525Z,1492148515.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:55.541Z,1492148515.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:55.930Z,1492148515.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:55.950Z,1492148515.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:56.320Z,1492148516.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:56.352Z,1492148516.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:56.737Z,1492148516.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:56.753Z,1492148516.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:57.140Z,1492148517.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:57.158Z,1492148517.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:57.517Z,1492148517.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:57.602Z,1492148517.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:57.917Z,1492148517.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:57.933Z,1492148517.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:58.333Z,1492148518.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:58.374Z,1492148518.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:58.723Z,1492148518.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:58.741Z,1492148518.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:59.132Z,1492148519.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:59.190Z,1492148519.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:59.526Z,1492148519.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:59.568Z,1492148519.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:41:59.925Z,1492148519.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:41:59.952Z,1492148519.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:00.330Z,1492148520.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:00.348Z,1492148520.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:00.759Z,1492148520.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:00.810Z,1492148520.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:01.118Z,1492148521.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:01.152Z,1492148521.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:01.521Z,1492148521.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:01.557Z,1492148521.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:01.925Z,1492148521.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:01.958Z,1492148521.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:02.322Z,1492148522.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:02.363Z,1492148522.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:02.769Z,1492148522.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:02.808Z,1492148522.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:03.131Z,1492148523.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:03.164Z,1492148523.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:03.535Z,1492148523.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:03.551Z,1492148523.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:03.934Z,1492148523.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:03.960Z,1492148523.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:04.332Z,1492148524.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:04.348Z,1492148524.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:04.753Z,1492148524.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:04.799Z,1492148524.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:05.122Z,1492148525.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:05.170Z,1492148525.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:05.522Z,1492148525.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:05.563Z,1492148525.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:05.946Z,1492148525.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:05.973Z,1492148525.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:06.329Z,1492148526.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:06.345Z,1492148526.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:06.751Z,1492148526.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:06.795Z,1492148526.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:07.138Z,1492148527.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:07.178Z,1492148527.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:07.529Z,1492148527.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:07.562Z,1492148527.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:07.920Z,1492148527.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:07.957Z,1492148527.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:08.334Z,1492148528.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:08.358Z,1492148528.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:08.769Z,1492148528.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:08.802Z,1492148528.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:09.125Z,1492148529.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:09.151Z,1492148529.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:09.529Z,1492148529.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:09.561Z,1492148529.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:09.921Z,1492148529.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:09.990Z,1492148529.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:13.567Z,1492148533.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:13.584Z,1492148533.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:13.694Z,1492148533.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:13.731Z,1492148533.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:14.093Z,1492148534.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:14.142Z,1492148534.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:14.493Z,1492148534.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:14.533Z,1492148534.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:14.890Z,1492148534.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:14.942Z,1492148534.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:15.293Z,1492148535.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:15.346Z,1492148535.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:15.690Z,1492148535.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:15.706Z,1492148535.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:16.092Z,1492148536.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:16.108Z,1492148536.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:16.155Z,1492148536.155 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:42:16.491Z,1492148536.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:16.507Z,1492148536.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:16.900Z,1492148536.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:16.916Z,1492148536.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:17.294Z,1492148537.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:17.310Z,1492148537.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:17.691Z,1492148537.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:17.707Z,1492148537.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:18.094Z,1492148538.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:18.111Z,1492148538.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:18.508Z,1492148538.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:18.549Z,1492148538.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:18.886Z,1492148538.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:18.901Z,1492148538.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:19.294Z,1492148539.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:19.310Z,1492148539.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:19.689Z,1492148539.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:19.705Z,1492148539.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:20.093Z,1492148540.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:20.108Z,1492148540.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:20.490Z,1492148540.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:20.506Z,1492148540.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:20.889Z,1492148540.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:20.906Z,1492148540.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:21.288Z,1492148541.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:21.315Z,1492148541.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:21.693Z,1492148541.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:21.709Z,1492148541.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:22.089Z,1492148542.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:22.111Z,1492148542.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:22.497Z,1492148542.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:22.514Z,1492148542.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:22.890Z,1492148542.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:22.906Z,1492148542.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:23.281Z,1492148543.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:23.317Z,1492148543.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:23.689Z,1492148543.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:23.717Z,1492148543.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:24.093Z,1492148544.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:24.110Z,1492148544.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:24.486Z,1492148544.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:24.502Z,1492148544.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:24.891Z,1492148544.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:24.906Z,1492148544.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:25.299Z,1492148545.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:25.323Z,1492148545.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:25.688Z,1492148545.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:25.712Z,1492148545.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:26.085Z,1492148546.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:26.101Z,1492148546.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:26.490Z,1492148546.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:26.570Z,1492148546.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:26.886Z,1492148546.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:26.902Z,1492148546.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:27.288Z,1492148547.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:27.343Z,1492148547.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:27.692Z,1492148547.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:27.708Z,1492148547.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:28.094Z,1492148548.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:28.149Z,1492148548.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:28.497Z,1492148548.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:28.541Z,1492148548.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:28.922Z,1492148548.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:28.965Z,1492148548.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:29.281Z,1492148549.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:29.326Z,1492148549.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:29.718Z,1492148549.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:29.734Z,1492148549.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:30.109Z,1492148550.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:30.130Z,1492148550.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:30.489Z,1492148550.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:30.520Z,1492148550.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:30.903Z,1492148550.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:30.940Z,1492148550.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:31.292Z,1492148551.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:31.335Z,1492148551.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:31.691Z,1492148551.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:31.707Z,1492148551.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:32.089Z,1492148552.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:32.108Z,1492148552.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:32.488Z,1492148552.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:32.504Z,1492148552.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:32.891Z,1492148552.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:32.908Z,1492148552.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:33.298Z,1492148553.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:33.361Z,1492148553.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:33.689Z,1492148553.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:33.758Z,1492148553.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:34.083Z,1492148554.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:34.112Z,1492148554.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:34.487Z,1492148554.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:34.518Z,1492148554.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:34.898Z,1492148554.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:34.954Z,1492148554.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:35.305Z,1492148555.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:35.339Z,1492148555.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:35.686Z,1492148555.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:35.761Z,1492148555.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:36.086Z,1492148556.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:36.132Z,1492148556.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:36.495Z,1492148556.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:36.541Z,1492148556.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:36.891Z,1492148556.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:36.932Z,1492148556.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:37.290Z,1492148557.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:37.306Z,1492148557.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:37.682Z,1492148557.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:37.713Z,1492148557.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:38.081Z,1492148558.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:38.118Z,1492148558.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:38.481Z,1492148558.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:38.519Z,1492148558.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:38.908Z,1492148558.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:39.049Z,1492148559.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:39.282Z,1492148559.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:39.298Z,1492148559.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:39.686Z,1492148559.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:39.703Z,1492148559.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:40.093Z,1492148560.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:40.138Z,1492148560.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:40.485Z,1492148560.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:40.500Z,1492148560.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:40.881Z,1492148560.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:40.896Z,1492148560.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:41.281Z,1492148561.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:41.302Z,1492148561.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:41.678Z,1492148561.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:41.694Z,1492148561.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:42.075Z,1492148562.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:42.090Z,1492148562.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:42.498Z,1492148562.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:42.556Z,1492148562.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:42.881Z,1492148562.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:42.898Z,1492148562.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:43.285Z,1492148563.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:43.306Z,1492148563.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:43.698Z,1492148563.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:43.738Z,1492148563.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:44.090Z,1492148564.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:44.110Z,1492148564.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:44.493Z,1492148564.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:44.509Z,1492148564.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:44.881Z,1492148564.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:44.908Z,1492148564.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:45.281Z,1492148565.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:45.317Z,1492148565.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:45.682Z,1492148565.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:45.730Z,1492148565.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:46.096Z,1492148566.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:46.137Z,1492148566.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:46.536Z,1492148566.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:46.699Z,1492148566.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:46.881Z,1492148566.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:46.915Z,1492148566.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:47.281Z,1492148567.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:47.352Z,1492148567.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:47.683Z,1492148567.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:47.741Z,1492148567.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:48.090Z,1492148568.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:48.197Z,1492148568.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:48.481Z,1492148568.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:48.514Z,1492148568.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:48.886Z,1492148568.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:48.926Z,1492148568.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:49.289Z,1492148569.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:49.317Z,1492148569.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:49.696Z,1492148569.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:49.794Z,1492148569.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:50.090Z,1492148570.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:50.153Z,1492148570.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:50.490Z,1492148570.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:50.510Z,1492148570.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:50.890Z,1492148570.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:50.910Z,1492148570.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:51.287Z,1492148571.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:51.315Z,1492148571.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:51.693Z,1492148571.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:51.709Z,1492148571.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:52.098Z,1492148572.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:52.118Z,1492148572.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:52.481Z,1492148572.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:52.518Z,1492148572.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:52.879Z,1492148572.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:52.951Z,1492148572.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:53.290Z,1492148573.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:53.317Z,1492148573.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:53.682Z,1492148573.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:53.718Z,1492148573.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:54.075Z,1492148574.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:54.091Z,1492148574.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:54.490Z,1492148574.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:54.522Z,1492148574.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:54.885Z,1492148574.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:55.013Z,1492148575.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:55.285Z,1492148575.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:55.318Z,1492148575.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:55.681Z,1492148575.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:55.706Z,1492148575.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:56.081Z,1492148576.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:56.119Z,1492148576.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:56.515Z,1492148576.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:56.542Z,1492148576.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:56.883Z,1492148576.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:56.928Z,1492148576.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:57.290Z,1492148577.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:57.306Z,1492148577.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:57.701Z,1492148577.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:57.716Z,1492148577.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:58.085Z,1492148578.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:58.121Z,1492148578.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:58.501Z,1492148578.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:58.516Z,1492148578.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:58.887Z,1492148578.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:58.945Z,1492148578.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:59.304Z,1492148579.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:59.336Z,1492148579.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:42:59.693Z,1492148579.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:42:59.733Z,1492148579.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:00.087Z,1492148580.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:00.102Z,1492148580.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:00.498Z,1492148580.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:00.534Z,1492148580.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:00.885Z,1492148580.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:00.918Z,1492148580.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:01.281Z,1492148581.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:01.310Z,1492148581.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:01.685Z,1492148581.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:01.718Z,1492148581.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:02.092Z,1492148582.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:02.185Z,1492148582.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:02.486Z,1492148582.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:02.502Z,1492148582.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:02.887Z,1492148582.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:02.903Z,1492148582.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:03.289Z,1492148583.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:03.346Z,1492148583.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:03.704Z,1492148583.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:03.728Z,1492148583.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:04.087Z,1492148584.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:04.145Z,1492148584.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:04.496Z,1492148584.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:04.536Z,1492148584.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:04.896Z,1492148584.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:04.951Z,1492148584.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:05.288Z,1492148585.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:05.309Z,1492148585.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:05.696Z,1492148585.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:05.738Z,1492148585.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:06.082Z,1492148586.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:06.115Z,1492148586.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:06.481Z,1492148586.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:06.517Z,1492148586.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:06.943Z,1492148586.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:07.002Z,1492148587.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:07.286Z,1492148587.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:07.311Z,1492148587.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:07.685Z,1492148587.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:07.704Z,1492148587.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:08.089Z,1492148588.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:08.110Z,1492148588.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:08.493Z,1492148588.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:08.519Z,1492148588.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:08.911Z,1492148588.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:09.017Z,1492148589.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:09.302Z,1492148589.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:09.318Z,1492148589.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:09.683Z,1492148589.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:09.721Z,1492148589.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:10.104Z,1492148590.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:10.129Z,1492148590.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:14.688Z,1492148594.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:14.738Z,1492148594.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:14.873Z,1492148594.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:14.910Z,1492148594.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:15.241Z,1492148595.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:15.257Z,1492148595.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:15.642Z,1492148595.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:15.657Z,1492148595.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:16.047Z,1492148596.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:16.067Z,1492148596.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:16.447Z,1492148596.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:16.469Z,1492148596.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:16.862Z,1492148596.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:16.958Z,1492148596.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:17.226Z,1492148597.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:17.270Z,1492148597.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:17.664Z,1492148597.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:17.690Z,1492148597.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:18.045Z,1492148598.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:18.090Z,1492148598.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:18.467Z,1492148598.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:18.495Z,1492148598.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:18.840Z,1492148598.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:18.886Z,1492148598.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:19.246Z,1492148599.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:19.298Z,1492148599.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:19.636Z,1492148599.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:19.652Z,1492148599.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:20.036Z,1492148600.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:20.060Z,1492148600.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:20.436Z,1492148600.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:20.462Z,1492148600.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:20.837Z,1492148600.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:20.859Z,1492148600.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:21.248Z,1492148601.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:21.264Z,1492148601.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:21.625Z,1492148601.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:21.666Z,1492148601.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:22.022Z,1492148602.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:22.048Z,1492148602.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:22.435Z,1492148602.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:22.463Z,1492148602.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:22.825Z,1492148602.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:22.864Z,1492148602.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:23.244Z,1492148603.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:23.260Z,1492148603.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:23.645Z,1492148603.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:23.660Z,1492148603.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:24.026Z,1492148604.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:24.062Z,1492148604.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:24.440Z,1492148604.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:24.456Z,1492148604.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:24.841Z,1492148604.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:24.862Z,1492148604.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:25.226Z,1492148605.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:25.262Z,1492148605.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:25.625Z,1492148605.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:25.661Z,1492148605.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:26.025Z,1492148606.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:26.066Z,1492148606.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:26.449Z,1492148606.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:26.465Z,1492148606.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:26.837Z,1492148606.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:26.876Z,1492148606.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:27.233Z,1492148607.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:27.250Z,1492148607.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:27.636Z,1492148607.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:27.653Z,1492148607.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:28.036Z,1492148608.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:28.089Z,1492148608.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:28.437Z,1492148608.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:28.492Z,1492148608.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:28.842Z,1492148608.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:28.880Z,1492148608.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:29.249Z,1492148609.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:29.291Z,1492148609.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:29.653Z,1492148609.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:29.691Z,1492148609.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:30.040Z,1492148610.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:30.108Z,1492148610.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:30.451Z,1492148610.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:30.470Z,1492148610.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:30.838Z,1492148610.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:30.861Z,1492148610.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:31.225Z,1492148611.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:31.302Z,1492148611.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:31.644Z,1492148611.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:31.702Z,1492148611.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:32.032Z,1492148612.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:32.068Z,1492148612.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:32.435Z,1492148612.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:32.451Z,1492148612.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:32.867Z,1492148612.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:32.925Z,1492148612.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:33.245Z,1492148613.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:33.278Z,1492148613.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:33.671Z,1492148613.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:33.727Z,1492148613.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:34.035Z,1492148614.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:34.051Z,1492148614.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:34.447Z,1492148614.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:34.498Z,1492148614.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:34.845Z,1492148614.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:34.938Z,1492148614.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:35.226Z,1492148615.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:35.309Z,1492148615.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:35.635Z,1492148615.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:35.674Z,1492148615.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:36.035Z,1492148616.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:36.069Z,1492148616.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:36.438Z,1492148616.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:36.469Z,1492148616.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:36.839Z,1492148616.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:36.948Z,1492148616.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:37.251Z,1492148617.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:37.267Z,1492148617.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:37.625Z,1492148617.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:37.662Z,1492148617.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:38.049Z,1492148618.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:38.079Z,1492148618.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:38.431Z,1492148618.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:38.502Z,1492148618.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:38.832Z,1492148618.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:38.848Z,1492148618.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:39.234Z,1492148619.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:39.249Z,1492148619.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:39.635Z,1492148619.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:39.650Z,1492148619.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:40.032Z,1492148620.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:40.048Z,1492148620.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:40.435Z,1492148620.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:40.458Z,1492148620.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:40.825Z,1492148620.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:40.862Z,1492148620.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:41.225Z,1492148621.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:41.251Z,1492148621.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:41.625Z,1492148621.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:41.666Z,1492148621.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:42.031Z,1492148622.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:42.062Z,1492148622.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:42.431Z,1492148622.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:42.463Z,1492148622.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:42.836Z,1492148622.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:42.871Z,1492148622.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:43.240Z,1492148623.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:43.256Z,1492148623.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:43.638Z,1492148623.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:43.654Z,1492148623.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:44.039Z,1492148624.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:44.054Z,1492148624.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:44.436Z,1492148624.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:44.458Z,1492148624.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:44.849Z,1492148624.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:44.865Z,1492148624.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:45.234Z,1492148625.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:45.266Z,1492148625.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:45.625Z,1492148625.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:45.654Z,1492148625.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:46.025Z,1492148626.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:46.064Z,1492148626.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:46.425Z,1492148626.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:46.534Z,1492148626.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:46.844Z,1492148626.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:46.870Z,1492148626.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:47.225Z,1492148627.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:47.274Z,1492148627.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:47.629Z,1492148627.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:47.662Z,1492148627.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:48.025Z,1492148628.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:48.074Z,1492148628.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:48.425Z,1492148628.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:48.487Z,1492148628.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:48.894Z,1492148628.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:48.957Z,1492148628.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:49.231Z,1492148629.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:49.276Z,1492148629.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:49.635Z,1492148629.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:49.668Z,1492148629.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:50.029Z,1492148630.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:50.055Z,1492148630.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:50.445Z,1492148630.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:50.466Z,1492148630.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:50.928Z,1492148630.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:50.981Z,1492148630.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:51.229Z,1492148631.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:51.250Z,1492148631.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:51.640Z,1492148631.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:51.714Z,1492148631.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:52.029Z,1492148632.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:52.045Z,1492148632.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:52.443Z,1492148632.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:52.458Z,1492148632.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:52.835Z,1492148632.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:52.896Z,1492148632.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:53.227Z,1492148633.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:53.264Z,1492148633.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:53.625Z,1492148633.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:53.664Z,1492148633.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:54.029Z,1492148634.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:54.060Z,1492148634.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:54.473Z,1492148634.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:54.578Z,1492148634.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:54.822Z,1492148634.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:54.877Z,1492148634.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:55.237Z,1492148635.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:55.276Z,1492148635.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:55.634Z,1492148635.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:55.650Z,1492148635.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:56.034Z,1492148636.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:56.053Z,1492148636.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:56.434Z,1492148636.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:56.450Z,1492148636.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:56.847Z,1492148636.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:56.866Z,1492148636.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:57.242Z,1492148637.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:57.258Z,1492148637.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:57.644Z,1492148637.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:57.671Z,1492148637.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:58.025Z,1492148638.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:58.052Z,1492148638.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:58.428Z,1492148638.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:58.463Z,1492148638.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:58.829Z,1492148638.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:58.878Z,1492148638.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:59.236Z,1492148639.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:59.278Z,1492148639.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:43:59.638Z,1492148639.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:43:59.674Z,1492148639.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:00.025Z,1492148640.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:00.062Z,1492148640.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:00.425Z,1492148640.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:00.486Z,1492148640.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:00.862Z,1492148640.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:00.946Z,1492148640.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:01.243Z,1492148641.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:01.260Z,1492148641.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:01.629Z,1492148641.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:01.696Z,1492148641.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:02.026Z,1492148642.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:02.054Z,1492148642.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:02.431Z,1492148642.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:02.501Z,1492148642.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:02.889Z,1492148642.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:02.975Z,1492148642.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:03.233Z,1492148643.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:03.263Z,1492148643.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:03.635Z,1492148643.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:03.672Z,1492148643.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:04.035Z,1492148644.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:04.056Z,1492148644.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:04.451Z,1492148644.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:04.526Z,1492148644.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:04.897Z,1492148644.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:04.939Z,1492148644.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:05.225Z,1492148645.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:05.288Z,1492148645.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:05.642Z,1492148645.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:05.658Z,1492148645.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:06.027Z,1492148646.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:06.062Z,1492148646.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:06.442Z,1492148646.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:06.601Z,1492148646.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:06.877Z,1492148646.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:06.939Z,1492148646.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:06.977Z,1492148646.977 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:06.977Z,1492148646.977 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:44:06.978Z,1492148646.977 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:44:07.023Z,1492148647.023 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:44:07.227Z,1492148647.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:07.280Z,1492148647.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:07.348Z,1492148647.348 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:44:07.348Z,1492148647.348 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:44:07.631Z,1492148647.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:07.684Z,1492148647.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:07.697Z,1492148647.697 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:44:07.697Z,1492148647.697 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:44:07.698Z,1492148647.698 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:44:08.025Z,1492148648.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:08.055Z,1492148648.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:08.430Z,1492148648.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:08.506Z,1492148648.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:08.839Z,1492148648.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:08.856Z,1492148648.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:09.247Z,1492148649.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:09.262Z,1492148649.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:09.271Z,1492148649.271 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:44:09.271Z,1492148649.271 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:44:09.271Z,1492148649.271 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:44:09.271Z,1492148649.271 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:44:09.625Z,1492148649.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:09.653Z,1492148649.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:09.662Z,1492148649.662 [Default:CheckIn:D] Stopped
2017-04-14T05:44:09.662Z,1492148649.662 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:44:10.025Z,1492148650.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:10.063Z,1492148650.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:10.072Z,1492148650.072 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 138.072380 min 
2017-04-14T05:44:10.072Z,1492148650.072 [Default:CheckIn:E] Stopped
2017-04-14T05:44:10.072Z,1492148650.072 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn] Stopped
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn](INFO): Running loop #21
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn] Running Loop=21
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:44:10.073Z,1492148650.073 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:44:10.425Z,1492148650.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:10.548Z,1492148650.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:13.901Z,1492148653.901 [NAL9602](INFO): Powering up
2017-04-14T05:44:13.928Z,1492148653.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:13.950Z,1492148653.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:14.058Z,1492148654.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:14.086Z,1492148654.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:14.434Z,1492148654.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:14.458Z,1492148654.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:14.837Z,1492148654.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:14.913Z,1492148654.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:15.253Z,1492148655.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:15.294Z,1492148655.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:15.634Z,1492148655.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:15.682Z,1492148655.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:16.059Z,1492148656.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:16.082Z,1492148656.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:16.432Z,1492148656.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:16.487Z,1492148656.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:16.932Z,1492148656.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:17.016Z,1492148657.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:17.225Z,1492148657.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:17.241Z,1492148657.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:17.635Z,1492148657.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:17.659Z,1492148657.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:18.033Z,1492148658.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:18.048Z,1492148658.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:18.436Z,1492148658.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:18.452Z,1492148658.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:18.880Z,1492148658.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:18.917Z,1492148658.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:19.225Z,1492148659.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:19.255Z,1492148659.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:19.648Z,1492148659.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:19.668Z,1492148659.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:20.024Z,1492148660.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:20.061Z,1492148660.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:20.428Z,1492148660.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:20.496Z,1492148660.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:20.834Z,1492148660.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:20.850Z,1492148660.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:21.241Z,1492148661.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:21.256Z,1492148661.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:21.633Z,1492148661.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:21.649Z,1492148661.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:22.037Z,1492148662.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:22.053Z,1492148662.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:22.434Z,1492148662.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:22.598Z,1492148662.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:22.833Z,1492148662.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:22.848Z,1492148662.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:23.236Z,1492148663.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:23.251Z,1492148663.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:23.633Z,1492148663.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:23.648Z,1492148663.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:24.032Z,1492148664.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:24.062Z,1492148664.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:24.454Z,1492148664.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:24.547Z,1492148664.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:24.813Z,1492148664.813 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:44:24.842Z,1492148664.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:24.859Z,1492148664.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:25.234Z,1492148665.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:25.254Z,1492148665.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:25.644Z,1492148665.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:25.666Z,1492148665.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:26.050Z,1492148666.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:26.070Z,1492148666.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:26.477Z,1492148666.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:26.580Z,1492148666.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:26.831Z,1492148666.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:26.847Z,1492148666.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:27.231Z,1492148667.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:27.247Z,1492148667.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:27.634Z,1492148667.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:27.650Z,1492148667.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:28.046Z,1492148668.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:28.088Z,1492148668.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:28.447Z,1492148668.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:28.470Z,1492148668.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:28.850Z,1492148668.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:28.960Z,1492148668.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:29.241Z,1492148669.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:29.262Z,1492148669.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:29.632Z,1492148669.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:29.670Z,1492148669.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:30.027Z,1492148670.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:30.071Z,1492148670.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:30.442Z,1492148670.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:30.458Z,1492148670.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:30.860Z,1492148670.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:30.926Z,1492148670.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:31.229Z,1492148671.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:31.283Z,1492148671.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:31.654Z,1492148671.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:31.670Z,1492148671.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:32.033Z,1492148672.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:32.062Z,1492148672.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:32.441Z,1492148672.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:32.474Z,1492148672.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:32.881Z,1492148672.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:32.921Z,1492148672.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:33.234Z,1492148673.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:33.250Z,1492148673.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:33.634Z,1492148673.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:33.649Z,1492148673.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:34.034Z,1492148674.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:34.049Z,1492148674.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:34.446Z,1492148674.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:34.537Z,1492148674.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:34.829Z,1492148674.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:34.908Z,1492148674.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:35.234Z,1492148675.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:35.254Z,1492148675.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:35.654Z,1492148675.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:35.793Z,1492148675.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:36.113Z,1492148676.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:36.229Z,1492148676.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:36.513Z,1492148676.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:36.610Z,1492148676.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:36.853Z,1492148676.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:36.898Z,1492148676.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:37.236Z,1492148677.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:37.289Z,1492148677.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:37.632Z,1492148677.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:37.730Z,1492148677.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:38.085Z,1492148678.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:38.157Z,1492148678.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:38.477Z,1492148678.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:38.565Z,1492148678.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:38.859Z,1492148678.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:38.956Z,1492148678.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:39.227Z,1492148679.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:39.310Z,1492148679.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:39.631Z,1492148679.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:39.686Z,1492148679.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:40.085Z,1492148680.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:40.129Z,1492148680.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:40.509Z,1492148680.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:40.559Z,1492148680.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:40.829Z,1492148680.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:40.869Z,1492148680.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:41.256Z,1492148681.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:41.279Z,1492148681.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:41.635Z,1492148681.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:41.651Z,1492148681.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:42.035Z,1492148682.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:42.051Z,1492148682.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:42.430Z,1492148682.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:42.505Z,1492148682.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:42.833Z,1492148682.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:42.861Z,1492148682.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:43.225Z,1492148683.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:43.321Z,1492148683.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:43.616Z,1492148683.616 [NAL9602](INFO): SBD MO Status=0, MOMSN=2114, MT Status=0, MTMSN=0
2017-04-14T05:44:43.616Z,1492148683.616 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:44:43.633Z,1492148683.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:43.686Z,1492148683.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:44.052Z,1492148684.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:44.112Z,1492148684.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:44.453Z,1492148684.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:44.469Z,1492148684.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:44.862Z,1492148684.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:44.934Z,1492148684.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:45.259Z,1492148685.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:45.276Z,1492148685.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:45.652Z,1492148685.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:45.710Z,1492148685.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:46.035Z,1492148686.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:46.116Z,1492148686.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:46.442Z,1492148686.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:46.479Z,1492148686.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:46.863Z,1492148686.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:46.894Z,1492148686.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:47.249Z,1492148687.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:47.289Z,1492148687.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:47.672Z,1492148687.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:47.699Z,1492148687.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:48.035Z,1492148688.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:48.050Z,1492148688.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:48.493Z,1492148688.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:48.550Z,1492148688.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:48.846Z,1492148688.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:48.899Z,1492148688.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:49.239Z,1492148689.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:49.255Z,1492148689.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:49.625Z,1492148689.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:49.658Z,1492148689.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:50.065Z,1492148690.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:50.114Z,1492148690.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:50.487Z,1492148690.487 [NAL9602](INFO): GPS fix at 20170414T054502: (36.802376, -121.787181)
2017-04-14T05:44:50.505Z,1492148690.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:50.577Z,1492148690.577 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:44:50.577Z,1492148690.577 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:44:50.847Z,1492148690.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:50.877Z,1492148690.877 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:50.877Z,1492148690.877 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:44:50.877Z,1492148690.877 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:44:50.925Z,1492148690.925 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:50.925Z,1492148690.925 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:44:50.925Z,1492148690.925 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:44:51.013Z,1492148691.013 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:44:51.014Z,1492148691.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:44:51.665Z,1492148691.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:51.806Z,1492148691.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:44:51.806Z,1492148691.806 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:44:51.806Z,1492148691.806 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:44:51.807Z,1492148691.806 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:44:51.997Z,1492148691.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:52.013Z,1492148692.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:44:52.013Z,1492148692.013 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:44:52.014Z,1492148692.014 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:44:52.060Z,1492148692.060 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:44:52.061Z,1492148692.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:44:52.061Z,1492148692.061 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:44:57.018Z,1492148697.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:57.042Z,1492148697.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:57.122Z,1492148697.122 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0088.lzma
2017-04-14T05:44:57.189Z,1492148697.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:57.234Z,1492148697.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:57.558Z,1492148697.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:57.637Z,1492148697.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:57.918Z,1492148697.918 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0088.lzma.bak
2017-04-14T05:44:57.918Z,1492148697.918 [DataOverHttps](INFO): SBD MOMSN=4885241
2017-04-14T05:44:57.948Z,1492148697.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:57.990Z,1492148697.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:58.376Z,1492148698.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:58.433Z,1492148698.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:58.880Z,1492148698.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:58.922Z,1492148698.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:44:59.175Z,1492148699.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:44:59.234Z,1492148699.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:03.307Z,1492148703.307 [NAL9602](INFO): Powering down
2017-04-14T05:45:03.348Z,1492148703.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:03.394Z,1492148703.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:03.504Z,1492148703.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:03.549Z,1492148703.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:03.854Z,1492148703.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:03.869Z,1492148703.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:04.258Z,1492148704.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:04.274Z,1492148704.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:04.659Z,1492148704.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:04.675Z,1492148704.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:05.064Z,1492148705.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:05.108Z,1492148705.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:05.465Z,1492148705.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:05.507Z,1492148705.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:05.860Z,1492148705.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:05.910Z,1492148705.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:06.258Z,1492148706.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:06.274Z,1492148706.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:12.365Z,1492148712.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:12.407Z,1492148712.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:12.513Z,1492148712.513 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0089.lzma
2017-04-14T05:45:12.543Z,1492148712.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:12.583Z,1492148712.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:12.949Z,1492148712.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:12.970Z,1492148712.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:13.318Z,1492148713.318 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0089.lzma.bak
2017-04-14T05:45:13.318Z,1492148713.318 [DataOverHttps](INFO): SBD MOMSN=4885244
2017-04-14T05:45:13.359Z,1492148713.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:13.375Z,1492148713.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:13.757Z,1492148713.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:13.773Z,1492148713.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:13.799Z,1492148713.799 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:45:13.799Z,1492148713.799 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:45:13.799Z,1492148713.799 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:45:14.157Z,1492148714.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:14.176Z,1492148714.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:18.651Z,1492148718.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:18.742Z,1492148718.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:18.822Z,1492148718.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:18.872Z,1492148718.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:19.235Z,1492148719.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:19.293Z,1492148719.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:19.639Z,1492148719.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:19.654Z,1492148719.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:20.046Z,1492148720.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:20.109Z,1492148720.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:20.477Z,1492148720.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:20.541Z,1492148720.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:20.838Z,1492148720.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:20.890Z,1492148720.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:21.236Z,1492148721.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:21.259Z,1492148721.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:21.645Z,1492148721.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:21.673Z,1492148721.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:22.024Z,1492148722.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:22.065Z,1492148722.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:22.461Z,1492148722.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:22.516Z,1492148722.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:22.829Z,1492148722.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:22.859Z,1492148722.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:23.224Z,1492148723.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:23.282Z,1492148723.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:23.619Z,1492148723.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:23.636Z,1492148723.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:24.038Z,1492148724.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:24.083Z,1492148724.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:24.491Z,1492148724.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:24.524Z,1492148724.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:24.842Z,1492148724.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:24.900Z,1492148724.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:25.232Z,1492148725.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:25.252Z,1492148725.252 [PNI_TCM](ERROR): CRC does not match. Expected:0x64920 got:0x12056
2017-04-14T05:45:25.304Z,1492148725.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:25.643Z,1492148725.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:25.710Z,1492148725.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:26.021Z,1492148726.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:26.049Z,1492148726.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:26.423Z,1492148726.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:26.470Z,1492148726.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:26.859Z,1492148726.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:26.875Z,1492148726.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:27.233Z,1492148727.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:27.290Z,1492148727.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:27.629Z,1492148727.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:27.678Z,1492148727.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:28.030Z,1492148728.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:28.086Z,1492148728.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:28.454Z,1492148728.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:28.485Z,1492148728.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:28.838Z,1492148728.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:28.907Z,1492148728.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:29.221Z,1492148729.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:29.248Z,1492148729.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:29.625Z,1492148729.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:29.658Z,1492148729.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:30.023Z,1492148730.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:30.108Z,1492148730.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:30.454Z,1492148730.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:30.493Z,1492148730.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:30.825Z,1492148730.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:30.874Z,1492148730.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:31.253Z,1492148731.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:31.273Z,1492148731.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:31.621Z,1492148731.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:31.665Z,1492148731.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:32.021Z,1492148732.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:32.078Z,1492148732.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:32.427Z,1492148732.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:32.489Z,1492148732.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:32.848Z,1492148732.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:32.924Z,1492148732.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:33.221Z,1492148733.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:33.262Z,1492148733.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:33.621Z,1492148733.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:33.668Z,1492148733.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:34.020Z,1492148734.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:34.076Z,1492148734.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:34.428Z,1492148734.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:34.474Z,1492148734.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:34.838Z,1492148734.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:34.894Z,1492148734.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:35.238Z,1492148735.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:35.299Z,1492148735.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:35.631Z,1492148735.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:35.672Z,1492148735.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:36.060Z,1492148736.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:36.088Z,1492148736.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:36.447Z,1492148736.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:36.493Z,1492148736.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:36.846Z,1492148736.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:36.898Z,1492148736.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:37.225Z,1492148737.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:37.285Z,1492148737.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:37.625Z,1492148737.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:37.666Z,1492148737.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:38.032Z,1492148738.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:38.056Z,1492148738.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:38.485Z,1492148738.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:38.534Z,1492148738.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:38.833Z,1492148738.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:38.864Z,1492148738.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:39.230Z,1492148739.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:39.275Z,1492148739.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:39.635Z,1492148739.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:39.669Z,1492148739.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:40.035Z,1492148740.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:40.087Z,1492148740.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:40.433Z,1492148740.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:40.482Z,1492148740.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:40.836Z,1492148740.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:40.873Z,1492148740.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:41.246Z,1492148741.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:41.268Z,1492148741.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:41.623Z,1492148741.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:41.674Z,1492148741.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:42.026Z,1492148742.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:42.070Z,1492148742.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:42.428Z,1492148742.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:42.486Z,1492148742.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:42.860Z,1492148742.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:42.910Z,1492148742.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:43.225Z,1492148743.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:43.265Z,1492148743.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:43.623Z,1492148743.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:43.668Z,1492148743.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:44.029Z,1492148744.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:44.061Z,1492148744.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:44.427Z,1492148744.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:44.475Z,1492148744.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:44.829Z,1492148744.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:44.870Z,1492148744.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:45.250Z,1492148745.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:45.276Z,1492148745.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:45.631Z,1492148745.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:45.692Z,1492148745.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:46.033Z,1492148746.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:46.054Z,1492148746.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:46.431Z,1492148746.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:46.458Z,1492148746.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:46.850Z,1492148746.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:46.868Z,1492148746.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:47.238Z,1492148747.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:47.298Z,1492148747.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:47.635Z,1492148747.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:47.706Z,1492148747.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:48.035Z,1492148748.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:48.058Z,1492148748.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:48.421Z,1492148748.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:48.486Z,1492148748.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:48.844Z,1492148748.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:48.860Z,1492148748.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:49.245Z,1492148749.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:49.306Z,1492148749.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:49.621Z,1492148749.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:49.700Z,1492148749.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:50.024Z,1492148750.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:50.067Z,1492148750.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:50.430Z,1492148750.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:50.457Z,1492148750.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:50.835Z,1492148750.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:50.883Z,1492148750.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:51.241Z,1492148751.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:51.286Z,1492148751.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:51.641Z,1492148751.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:51.660Z,1492148751.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:52.037Z,1492148752.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:52.066Z,1492148752.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:52.459Z,1492148752.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:52.494Z,1492148752.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:52.825Z,1492148752.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:52.867Z,1492148752.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:53.225Z,1492148753.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:53.258Z,1492148753.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:53.624Z,1492148753.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:53.652Z,1492148753.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:54.031Z,1492148754.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:54.063Z,1492148754.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:54.431Z,1492148754.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:54.461Z,1492148754.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:54.850Z,1492148754.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:54.878Z,1492148754.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:55.249Z,1492148755.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:55.280Z,1492148755.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:55.632Z,1492148755.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:55.648Z,1492148755.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:56.038Z,1492148756.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:56.056Z,1492148756.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:56.440Z,1492148756.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:56.460Z,1492148756.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:56.834Z,1492148756.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:56.854Z,1492148756.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:57.226Z,1492148757.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:57.266Z,1492148757.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:57.651Z,1492148757.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:57.676Z,1492148757.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:58.037Z,1492148758.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:58.080Z,1492148758.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:58.439Z,1492148758.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:58.469Z,1492148758.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:58.841Z,1492148758.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:58.873Z,1492148758.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:59.226Z,1492148759.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:59.250Z,1492148759.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:45:59.636Z,1492148759.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:45:59.660Z,1492148759.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:00.021Z,1492148760.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:00.058Z,1492148760.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:00.450Z,1492148760.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:00.481Z,1492148760.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:00.827Z,1492148760.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:00.864Z,1492148760.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:01.236Z,1492148761.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:01.263Z,1492148761.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:01.629Z,1492148761.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:01.663Z,1492148761.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:02.021Z,1492148762.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:02.094Z,1492148762.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:02.437Z,1492148762.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:02.462Z,1492148762.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:02.824Z,1492148762.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:02.886Z,1492148762.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:03.230Z,1492148763.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:03.265Z,1492148763.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:03.628Z,1492148763.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:03.684Z,1492148763.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:04.037Z,1492148764.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:04.080Z,1492148764.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:04.433Z,1492148764.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:04.449Z,1492148764.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:04.836Z,1492148764.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:04.860Z,1492148764.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:05.225Z,1492148765.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:05.252Z,1492148765.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:05.625Z,1492148765.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:05.654Z,1492148765.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:06.041Z,1492148766.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:06.056Z,1492148766.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:06.432Z,1492148766.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:06.472Z,1492148766.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:06.829Z,1492148766.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:06.845Z,1492148766.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:07.233Z,1492148767.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:07.249Z,1492148767.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:07.642Z,1492148767.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:07.680Z,1492148767.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:08.029Z,1492148768.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:08.045Z,1492148768.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:08.442Z,1492148768.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:08.458Z,1492148768.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:08.851Z,1492148768.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:08.898Z,1492148768.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:09.228Z,1492148769.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:09.265Z,1492148769.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:09.626Z,1492148769.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:09.641Z,1492148769.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:10.029Z,1492148770.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:10.076Z,1492148770.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:10.435Z,1492148770.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:10.467Z,1492148770.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:10.832Z,1492148770.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:10.848Z,1492148770.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:11.233Z,1492148771.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:11.254Z,1492148771.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:11.645Z,1492148771.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:11.661Z,1492148771.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:12.033Z,1492148772.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:12.053Z,1492148772.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:12.432Z,1492148772.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:12.450Z,1492148772.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:12.821Z,1492148772.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:12.848Z,1492148772.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:13.235Z,1492148773.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:13.258Z,1492148773.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:13.650Z,1492148773.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:13.672Z,1492148773.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:14.021Z,1492148774.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:14.058Z,1492148774.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:14.423Z,1492148774.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:14.497Z,1492148774.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:19.679Z,1492148779.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:19.785Z,1492148779.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:19.898Z,1492148779.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:19.960Z,1492148779.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:20.283Z,1492148780.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:20.298Z,1492148780.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:20.684Z,1492148780.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:20.738Z,1492148780.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:21.091Z,1492148781.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:21.107Z,1492148781.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:21.488Z,1492148781.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:21.526Z,1492148781.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:21.886Z,1492148781.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:21.908Z,1492148781.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:22.273Z,1492148782.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:22.322Z,1492148782.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:22.704Z,1492148782.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:22.729Z,1492148782.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:23.078Z,1492148783.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:23.116Z,1492148783.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:23.479Z,1492148783.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:23.511Z,1492148783.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:23.876Z,1492148783.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:23.902Z,1492148783.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:24.281Z,1492148784.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:24.302Z,1492148784.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:24.708Z,1492148784.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:24.747Z,1492148784.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:25.073Z,1492148785.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:25.110Z,1492148785.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:25.477Z,1492148785.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:25.503Z,1492148785.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:25.873Z,1492148785.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:25.913Z,1492148785.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:26.339Z,1492148786.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:26.371Z,1492148786.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:26.681Z,1492148786.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:26.697Z,1492148786.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:27.081Z,1492148787.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:27.097Z,1492148787.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:27.479Z,1492148787.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:27.506Z,1492148787.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:27.877Z,1492148787.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:27.899Z,1492148787.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:28.352Z,1492148788.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:28.397Z,1492148788.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:28.684Z,1492148788.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:28.708Z,1492148788.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:29.077Z,1492148789.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:29.108Z,1492148789.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:29.485Z,1492148789.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:29.501Z,1492148789.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:29.896Z,1492148789.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:29.918Z,1492148789.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:30.324Z,1492148790.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:30.348Z,1492148790.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:30.688Z,1492148790.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:30.728Z,1492148790.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:31.081Z,1492148791.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:31.097Z,1492148791.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:31.489Z,1492148791.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:31.510Z,1492148791.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:31.880Z,1492148791.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:31.910Z,1492148791.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:32.344Z,1492148792.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:32.395Z,1492148792.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:32.679Z,1492148792.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:32.733Z,1492148792.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:33.078Z,1492148793.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:33.094Z,1492148793.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:33.482Z,1492148793.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:33.497Z,1492148793.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:33.882Z,1492148793.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:33.898Z,1492148793.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:34.300Z,1492148794.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:34.446Z,1492148794.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:34.677Z,1492148794.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:34.714Z,1492148794.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:35.073Z,1492148795.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:35.109Z,1492148795.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:35.473Z,1492148795.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:35.545Z,1492148795.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:35.877Z,1492148795.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:35.905Z,1492148795.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:36.273Z,1492148796.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:36.318Z,1492148796.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:36.678Z,1492148796.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:36.745Z,1492148796.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:37.079Z,1492148797.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:37.111Z,1492148797.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:37.485Z,1492148797.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:37.518Z,1492148797.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:37.874Z,1492148797.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:37.902Z,1492148797.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:38.289Z,1492148798.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:38.318Z,1492148798.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:38.701Z,1492148798.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:38.720Z,1492148798.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:39.073Z,1492148799.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:39.089Z,1492148799.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:39.477Z,1492148799.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:39.493Z,1492148799.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:39.879Z,1492148799.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:39.894Z,1492148799.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:40.331Z,1492148800.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:40.376Z,1492148800.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:40.678Z,1492148800.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:40.716Z,1492148800.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:41.084Z,1492148801.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:41.100Z,1492148801.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:41.485Z,1492148801.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:41.506Z,1492148801.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:41.890Z,1492148801.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:41.906Z,1492148801.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:42.341Z,1492148802.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:42.363Z,1492148802.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:42.692Z,1492148802.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:42.709Z,1492148802.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:43.073Z,1492148803.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:43.108Z,1492148803.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:43.473Z,1492148803.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:43.506Z,1492148803.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:43.886Z,1492148803.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:43.902Z,1492148803.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:44.313Z,1492148804.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:44.370Z,1492148804.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:44.673Z,1492148804.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:44.710Z,1492148804.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:45.077Z,1492148805.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:45.111Z,1492148805.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:45.481Z,1492148805.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:45.507Z,1492148805.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:45.873Z,1492148805.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:45.911Z,1492148805.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:46.316Z,1492148806.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:46.364Z,1492148806.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:46.681Z,1492148806.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:46.729Z,1492148806.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:47.081Z,1492148807.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:47.106Z,1492148807.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:47.481Z,1492148807.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:47.512Z,1492148807.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:47.881Z,1492148807.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:47.909Z,1492148807.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:48.340Z,1492148808.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:48.376Z,1492148808.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:48.673Z,1492148808.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:48.754Z,1492148808.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:49.094Z,1492148809.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:49.162Z,1492148809.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:49.478Z,1492148809.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:49.506Z,1492148809.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:49.880Z,1492148809.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:49.896Z,1492148809.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:50.282Z,1492148810.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:50.324Z,1492148810.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:50.676Z,1492148810.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:50.700Z,1492148810.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:51.084Z,1492148811.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:51.145Z,1492148811.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:51.481Z,1492148811.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:51.531Z,1492148811.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:51.885Z,1492148811.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:51.901Z,1492148811.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:52.299Z,1492148812.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:52.354Z,1492148812.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:52.687Z,1492148812.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:52.743Z,1492148812.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:53.100Z,1492148813.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:53.123Z,1492148813.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:53.485Z,1492148813.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:53.521Z,1492148813.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:53.874Z,1492148813.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:53.892Z,1492148813.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:54.319Z,1492148814.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:54.367Z,1492148814.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:54.682Z,1492148814.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:54.746Z,1492148814.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:55.075Z,1492148815.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:55.112Z,1492148815.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:55.485Z,1492148815.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:55.502Z,1492148815.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:55.896Z,1492148815.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:55.920Z,1492148815.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:56.320Z,1492148816.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:56.349Z,1492148816.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:56.670Z,1492148816.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:56.704Z,1492148816.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:57.073Z,1492148817.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:57.112Z,1492148817.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:57.495Z,1492148817.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:57.517Z,1492148817.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:57.873Z,1492148817.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:57.916Z,1492148817.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:58.334Z,1492148818.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:58.373Z,1492148818.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:58.682Z,1492148818.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:58.734Z,1492148818.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:59.088Z,1492148819.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:59.128Z,1492148819.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:59.480Z,1492148819.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:59.504Z,1492148819.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:46:59.883Z,1492148819.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:46:59.900Z,1492148819.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:00.300Z,1492148820.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:00.335Z,1492148820.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:00.674Z,1492148820.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:00.721Z,1492148820.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:01.073Z,1492148821.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:01.123Z,1492148821.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:01.488Z,1492148821.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:01.531Z,1492148821.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:01.881Z,1492148821.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:01.898Z,1492148821.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:02.350Z,1492148822.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:02.407Z,1492148822.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:02.673Z,1492148822.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:02.710Z,1492148822.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:03.077Z,1492148823.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:03.105Z,1492148823.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:03.473Z,1492148823.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:03.561Z,1492148823.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:03.870Z,1492148823.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:03.886Z,1492148823.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:04.284Z,1492148824.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:04.362Z,1492148824.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:04.689Z,1492148824.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:04.759Z,1492148824.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:05.079Z,1492148825.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:05.139Z,1492148825.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:05.481Z,1492148825.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:05.517Z,1492148825.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:05.881Z,1492148825.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:05.942Z,1492148825.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:06.282Z,1492148826.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:06.326Z,1492148826.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:06.682Z,1492148826.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:06.698Z,1492148826.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:07.078Z,1492148827.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:07.104Z,1492148827.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:07.502Z,1492148827.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:07.538Z,1492148827.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:07.880Z,1492148827.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:07.936Z,1492148827.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:07.953Z,1492148827.953 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:07.953Z,1492148827.953 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:47:07.953Z,1492148827.953 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:47:08.008Z,1492148828.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:47:08.313Z,1492148828.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:08.389Z,1492148828.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:08.438Z,1492148828.438 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:47:08.438Z,1492148828.438 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:47:08.739Z,1492148828.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:08.773Z,1492148828.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:08.788Z,1492148828.788 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:47:08.788Z,1492148828.788 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:47:08.788Z,1492148828.788 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:47:09.102Z,1492148829.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:09.163Z,1492148829.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:09.484Z,1492148829.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:09.549Z,1492148829.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:09.878Z,1492148829.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:09.934Z,1492148829.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:10.282Z,1492148830.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:10.340Z,1492148830.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:10.693Z,1492148830.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:10.742Z,1492148830.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:11.073Z,1492148831.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:11.136Z,1492148831.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:11.505Z,1492148831.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:11.522Z,1492148831.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:11.884Z,1492148831.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:11.919Z,1492148831.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:12.272Z,1492148832.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:12.325Z,1492148832.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:12.698Z,1492148832.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:12.737Z,1492148832.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:13.076Z,1492148833.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:13.121Z,1492148833.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:13.478Z,1492148833.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:13.510Z,1492148833.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:13.887Z,1492148833.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:13.923Z,1492148833.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:14.280Z,1492148834.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:14.325Z,1492148834.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:14.691Z,1492148834.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:14.722Z,1492148834.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:15.092Z,1492148835.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:15.128Z,1492148835.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:15.484Z,1492148835.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:15.520Z,1492148835.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:15.878Z,1492148835.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:15.918Z,1492148835.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:19.529Z,1492148839.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:19.646Z,1492148839.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:19.746Z,1492148839.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:19.778Z,1492148839.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:20.131Z,1492148840.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:20.164Z,1492148840.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:20.629Z,1492148840.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:20.713Z,1492148840.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:20.952Z,1492148840.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:20.972Z,1492148840.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:21.344Z,1492148841.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:21.406Z,1492148841.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:21.733Z,1492148841.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:21.777Z,1492148841.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:22.137Z,1492148842.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:22.260Z,1492148842.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:22.539Z,1492148842.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:22.566Z,1492148842.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:22.965Z,1492148842.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:23.010Z,1492148843.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:23.342Z,1492148843.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:23.362Z,1492148843.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:23.742Z,1492148843.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:23.762Z,1492148843.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:24.133Z,1492148844.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:24.232Z,1492148844.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:24.536Z,1492148844.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:24.579Z,1492148844.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:24.948Z,1492148844.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:25.017Z,1492148845.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:25.335Z,1492148845.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:25.362Z,1492148845.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:25.736Z,1492148845.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:25.785Z,1492148845.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:26.133Z,1492148846.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:26.215Z,1492148846.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:26.539Z,1492148846.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:26.554Z,1492148846.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:26.945Z,1492148846.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:26.960Z,1492148846.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:27.357Z,1492148847.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:27.401Z,1492148847.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:27.741Z,1492148847.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:27.762Z,1492148847.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:28.140Z,1492148848.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:28.245Z,1492148848.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:28.545Z,1492148848.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:28.561Z,1492148848.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:28.958Z,1492148848.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:28.975Z,1492148848.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:29.333Z,1492148849.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:29.370Z,1492148849.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:29.749Z,1492148849.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:29.772Z,1492148849.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:30.149Z,1492148850.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:30.183Z,1492148850.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:30.559Z,1492148850.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:30.617Z,1492148850.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:30.950Z,1492148850.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:30.972Z,1492148850.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:31.335Z,1492148851.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:31.381Z,1492148851.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:31.756Z,1492148851.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:31.779Z,1492148851.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:32.137Z,1492148852.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:32.164Z,1492148852.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:32.585Z,1492148852.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:32.636Z,1492148852.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:32.941Z,1492148852.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:32.978Z,1492148852.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:33.339Z,1492148853.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:33.367Z,1492148853.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:33.733Z,1492148853.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:33.810Z,1492148853.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:34.141Z,1492148854.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:34.172Z,1492148854.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:34.557Z,1492148854.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:34.614Z,1492148854.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:34.939Z,1492148854.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:35.029Z,1492148855.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:35.333Z,1492148855.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:35.383Z,1492148855.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:35.733Z,1492148855.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:35.790Z,1492148855.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:36.198Z,1492148856.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:36.290Z,1492148856.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:36.538Z,1492148856.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:36.555Z,1492148856.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:36.942Z,1492148856.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:36.957Z,1492148856.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:37.347Z,1492148857.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:37.362Z,1492148857.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:37.752Z,1492148857.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:37.769Z,1492148857.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:38.161Z,1492148858.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:38.250Z,1492148858.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:38.557Z,1492148858.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:38.608Z,1492148858.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:38.960Z,1492148858.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:38.981Z,1492148858.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:39.338Z,1492148859.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:39.353Z,1492148859.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:39.743Z,1492148859.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:39.774Z,1492148859.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:40.218Z,1492148860.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:40.233Z,1492148860.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:40.540Z,1492148860.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:40.558Z,1492148860.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:40.939Z,1492148860.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:40.972Z,1492148860.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:41.348Z,1492148861.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:41.364Z,1492148861.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:41.746Z,1492148861.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:41.776Z,1492148861.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:42.183Z,1492148862.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:42.265Z,1492148862.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:42.578Z,1492148862.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:42.621Z,1492148862.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:42.941Z,1492148862.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:42.956Z,1492148862.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:43.335Z,1492148863.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:43.351Z,1492148863.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:43.745Z,1492148863.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:43.760Z,1492148863.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:44.233Z,1492148864.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:44.259Z,1492148864.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:44.541Z,1492148864.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:44.578Z,1492148864.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:44.945Z,1492148864.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:44.984Z,1492148864.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:45.338Z,1492148865.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:45.374Z,1492148865.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:45.746Z,1492148865.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:45.761Z,1492148865.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:46.140Z,1492148866.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:46.172Z,1492148866.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:46.551Z,1492148866.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:46.569Z,1492148866.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:46.933Z,1492148866.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:46.960Z,1492148866.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:47.350Z,1492148867.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:47.371Z,1492148867.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:47.751Z,1492148867.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:47.766Z,1492148867.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:48.150Z,1492148868.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:48.221Z,1492148868.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:48.563Z,1492148868.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:48.643Z,1492148868.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:48.933Z,1492148868.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:48.975Z,1492148868.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:49.341Z,1492148869.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:49.394Z,1492148869.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:49.737Z,1492148869.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:49.753Z,1492148869.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:50.187Z,1492148870.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:50.251Z,1492148870.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:50.543Z,1492148870.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:50.600Z,1492148870.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:50.946Z,1492148870.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:50.962Z,1492148870.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:51.344Z,1492148871.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:51.366Z,1492148871.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:51.743Z,1492148871.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:51.759Z,1492148871.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:52.192Z,1492148872.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:52.231Z,1492148872.231 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:52.235Z,1492148872.235 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:47:52.235Z,1492148872.235 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:47:52.252Z,1492148872.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:52.252Z,1492148872.253 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:47:52.253Z,1492148872.253 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:47:52.288Z,1492148872.288 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:47:52.288Z,1492148872.288 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:47:52.534Z,1492148872.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:52.584Z,1492148872.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:47:52.584Z,1492148872.584 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:47:52.585Z,1492148872.585 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:47:52.585Z,1492148872.585 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:47:52.933Z,1492148872.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:52.972Z,1492148872.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:47:52.973Z,1492148872.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:47:52.973Z,1492148872.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:47:52.978Z,1492148872.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:47:52.978Z,1492148872.978 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:47:52.979Z,1492148872.978 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:47:53.336Z,1492148873.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:53.363Z,1492148873.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:53.731Z,1492148873.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:53.768Z,1492148873.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:54.201Z,1492148874.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:54.261Z,1492148874.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:54.538Z,1492148874.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:54.574Z,1492148874.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:54.939Z,1492148874.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:54.983Z,1492148874.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:55.334Z,1492148875.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:55.363Z,1492148875.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:55.771Z,1492148875.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:55.786Z,1492148875.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:56.204Z,1492148876.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:56.254Z,1492148876.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:56.535Z,1492148876.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:56.573Z,1492148876.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:56.941Z,1492148876.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:56.962Z,1492148876.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:57.342Z,1492148877.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:57.359Z,1492148877.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:57.741Z,1492148877.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:57.759Z,1492148877.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:58.170Z,1492148878.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:58.258Z,1492148878.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:58.547Z,1492148878.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:58.628Z,1492148878.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:58.933Z,1492148878.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:58.964Z,1492148878.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:59.333Z,1492148879.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:59.371Z,1492148879.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:47:59.765Z,1492148879.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:47:59.822Z,1492148879.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:00.137Z,1492148880.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:00.165Z,1492148880.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:00.564Z,1492148880.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:00.581Z,1492148880.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:00.942Z,1492148880.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:00.973Z,1492148880.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:01.390Z,1492148881.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:01.458Z,1492148881.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:01.751Z,1492148881.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:01.790Z,1492148881.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:02.175Z,1492148882.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:02.297Z,1492148882.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:02.538Z,1492148882.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:02.695Z,1492148882.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:02.934Z,1492148882.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:03.024Z,1492148883.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:03.340Z,1492148883.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:03.422Z,1492148883.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:03.735Z,1492148883.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:03.790Z,1492148883.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:04.178Z,1492148884.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:04.241Z,1492148884.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:04.548Z,1492148884.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:04.596Z,1492148884.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:04.942Z,1492148884.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:04.958Z,1492148884.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:05.351Z,1492148885.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:05.366Z,1492148885.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:05.733Z,1492148885.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:05.769Z,1492148885.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:06.179Z,1492148886.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:06.224Z,1492148886.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:06.547Z,1492148886.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:06.577Z,1492148886.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:06.933Z,1492148886.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:06.954Z,1492148886.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:07.373Z,1492148887.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:07.389Z,1492148887.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:07.749Z,1492148887.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:07.794Z,1492148887.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:08.174Z,1492148888.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:08.262Z,1492148888.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:08.537Z,1492148888.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:08.553Z,1492148888.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:08.939Z,1492148888.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:08.955Z,1492148888.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:09.337Z,1492148889.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:09.364Z,1492148889.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:09.738Z,1492148889.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:09.758Z,1492148889.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:10.170Z,1492148890.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:10.226Z,1492148890.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:10.545Z,1492148890.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:10.564Z,1492148890.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:10.933Z,1492148890.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:10.970Z,1492148890.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:11.337Z,1492148891.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:11.363Z,1492148891.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:11.737Z,1492148891.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:11.764Z,1492148891.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:12.156Z,1492148892.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:12.252Z,1492148892.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:12.593Z,1492148892.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:12.645Z,1492148892.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:12.941Z,1492148892.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:12.986Z,1492148892.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:13.338Z,1492148893.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:13.355Z,1492148893.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:13.743Z,1492148893.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:13.788Z,1492148893.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:14.142Z,1492148894.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:14.158Z,1492148894.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:14.542Z,1492148894.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:14.564Z,1492148894.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:14.951Z,1492148894.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:14.969Z,1492148894.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:18.754Z,1492148898.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:18.848Z,1492148898.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:18.954Z,1492148898.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:19.005Z,1492148899.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:19.329Z,1492148899.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:19.375Z,1492148899.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:19.752Z,1492148899.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:19.768Z,1492148899.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:20.160Z,1492148900.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:20.215Z,1492148900.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:20.529Z,1492148900.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:20.563Z,1492148900.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:20.929Z,1492148900.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:20.986Z,1492148900.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:21.334Z,1492148901.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:21.350Z,1492148901.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:21.734Z,1492148901.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:21.775Z,1492148901.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:22.166Z,1492148902.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:22.214Z,1492148902.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:22.537Z,1492148902.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:22.586Z,1492148902.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:22.937Z,1492148902.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:22.958Z,1492148902.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:23.343Z,1492148903.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:23.359Z,1492148903.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:23.732Z,1492148903.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:23.764Z,1492148903.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:24.177Z,1492148904.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:24.202Z,1492148904.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:24.537Z,1492148904.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:24.582Z,1492148904.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:24.933Z,1492148904.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:24.965Z,1492148904.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:25.337Z,1492148905.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:25.379Z,1492148905.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:25.743Z,1492148905.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:25.784Z,1492148905.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:26.205Z,1492148906.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:26.242Z,1492148906.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:26.536Z,1492148906.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:26.563Z,1492148906.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:26.935Z,1492148906.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:26.974Z,1492148906.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:27.337Z,1492148907.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:27.369Z,1492148907.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:27.740Z,1492148907.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:27.755Z,1492148907.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:28.136Z,1492148908.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:28.185Z,1492148908.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:28.551Z,1492148908.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:28.584Z,1492148908.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:28.942Z,1492148908.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:28.979Z,1492148908.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:29.346Z,1492148909.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:29.399Z,1492148909.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:29.757Z,1492148909.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:29.795Z,1492148909.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:30.144Z,1492148910.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:30.160Z,1492148910.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:30.536Z,1492148910.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:30.564Z,1492148910.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:30.947Z,1492148910.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:30.963Z,1492148910.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:31.340Z,1492148911.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:31.377Z,1492148911.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:31.729Z,1492148911.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:31.757Z,1492148911.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:32.156Z,1492148912.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:32.182Z,1492148912.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:32.550Z,1492148912.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:32.606Z,1492148912.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:32.938Z,1492148912.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:33.026Z,1492148913.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:33.343Z,1492148913.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:33.389Z,1492148913.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:33.736Z,1492148913.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:33.775Z,1492148913.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:34.164Z,1492148914.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:34.234Z,1492148914.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:34.551Z,1492148914.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:34.582Z,1492148914.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:34.966Z,1492148914.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:35.018Z,1492148915.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:35.343Z,1492148915.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:35.395Z,1492148915.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:35.737Z,1492148915.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:35.786Z,1492148915.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:36.147Z,1492148916.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:36.190Z,1492148916.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:36.542Z,1492148916.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:36.566Z,1492148916.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:36.944Z,1492148916.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:36.965Z,1492148916.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:37.329Z,1492148917.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:37.363Z,1492148917.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:37.729Z,1492148917.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:37.755Z,1492148917.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:38.159Z,1492148918.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:38.200Z,1492148918.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:38.529Z,1492148918.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:38.569Z,1492148918.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:38.929Z,1492148918.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:38.970Z,1492148918.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:39.333Z,1492148919.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:39.368Z,1492148919.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:39.729Z,1492148919.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:39.764Z,1492148919.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:40.184Z,1492148920.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:40.238Z,1492148920.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:40.539Z,1492148920.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:40.586Z,1492148920.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:40.941Z,1492148920.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:40.959Z,1492148920.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:41.336Z,1492148921.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:41.358Z,1492148921.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:41.743Z,1492148921.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:41.759Z,1492148921.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:42.145Z,1492148922.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:42.196Z,1492148922.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:42.556Z,1492148922.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:42.576Z,1492148922.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:42.929Z,1492148922.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:42.965Z,1492148922.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:43.329Z,1492148923.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:43.366Z,1492148923.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:43.733Z,1492148923.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:43.778Z,1492148923.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:44.133Z,1492148924.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:44.169Z,1492148924.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:44.558Z,1492148924.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:44.574Z,1492148924.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:44.938Z,1492148924.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:44.965Z,1492148924.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:45.329Z,1492148925.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:45.370Z,1492148925.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:45.734Z,1492148925.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:45.776Z,1492148925.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:46.148Z,1492148926.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:46.192Z,1492148926.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:46.561Z,1492148926.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:46.592Z,1492148926.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:46.938Z,1492148926.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:46.985Z,1492148926.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:47.335Z,1492148927.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:47.394Z,1492148927.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:47.747Z,1492148927.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:47.763Z,1492148927.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:48.145Z,1492148928.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:48.203Z,1492148928.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:48.550Z,1492148928.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:48.574Z,1492148928.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:48.933Z,1492148928.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:49.006Z,1492148929.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:49.335Z,1492148929.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:49.375Z,1492148929.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:49.735Z,1492148929.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:49.786Z,1492148929.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:50.136Z,1492148930.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:50.194Z,1492148930.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:50.577Z,1492148930.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:50.630Z,1492148930.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:50.945Z,1492148930.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:50.976Z,1492148930.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:51.358Z,1492148931.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:51.374Z,1492148931.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:51.766Z,1492148931.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:51.803Z,1492148931.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:52.157Z,1492148932.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:52.232Z,1492148932.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:52.560Z,1492148932.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:52.598Z,1492148932.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:52.943Z,1492148932.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:53.001Z,1492148933.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:53.333Z,1492148933.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:53.361Z,1492148933.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:53.747Z,1492148933.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:53.763Z,1492148933.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:54.206Z,1492148934.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:54.249Z,1492148934.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:54.543Z,1492148934.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:54.563Z,1492148934.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:54.950Z,1492148934.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:54.967Z,1492148934.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:55.329Z,1492148935.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:55.363Z,1492148935.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:55.742Z,1492148935.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:55.757Z,1492148935.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:56.134Z,1492148936.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:56.162Z,1492148936.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:56.565Z,1492148936.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:56.586Z,1492148936.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:56.942Z,1492148936.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:56.971Z,1492148936.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:57.342Z,1492148937.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:57.373Z,1492148937.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:57.732Z,1492148937.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:57.748Z,1492148937.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:58.137Z,1492148938.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:58.177Z,1492148938.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:58.546Z,1492148938.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:58.576Z,1492148938.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:58.941Z,1492148938.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:58.976Z,1492148938.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:59.358Z,1492148939.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:59.382Z,1492148939.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:48:59.750Z,1492148939.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:48:59.766Z,1492148939.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:00.143Z,1492148940.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:00.166Z,1492148940.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:00.537Z,1492148940.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:00.561Z,1492148940.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:00.946Z,1492148940.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:00.966Z,1492148940.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:01.329Z,1492148941.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:01.351Z,1492148941.351 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T05:49:01.351Z,1492148941.351 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:49:01.352Z,1492148941.352 [BPC1](ERROR): Data Fault
2017-04-14T05:49:01.387Z,1492148941.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:01.422Z,1492148941.422 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:49:01.738Z,1492148941.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:01.765Z,1492148941.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:02.133Z,1492148942.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:02.161Z,1492148942.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:02.548Z,1492148942.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:02.570Z,1492148942.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:02.589Z,1492148942.589 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:49:02.589Z,1492148942.589 [BPC1] No Fault, FailCount= 1
2017-04-14T05:49:02.941Z,1492148942.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:03.010Z,1492148943.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:03.362Z,1492148943.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:03.424Z,1492148943.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:03.736Z,1492148943.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:03.779Z,1492148943.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:04.149Z,1492148944.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:04.164Z,1492148944.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:04.546Z,1492148944.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:04.581Z,1492148944.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:04.944Z,1492148944.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:04.966Z,1492148944.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:05.349Z,1492148945.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:05.366Z,1492148945.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:05.749Z,1492148945.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:05.770Z,1492148945.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:06.134Z,1492148946.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:06.166Z,1492148946.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:06.548Z,1492148946.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:06.570Z,1492148946.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:06.951Z,1492148946.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:06.979Z,1492148946.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:07.366Z,1492148947.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:07.416Z,1492148947.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:07.729Z,1492148947.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:07.767Z,1492148947.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:08.175Z,1492148948.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:08.244Z,1492148948.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:08.557Z,1492148948.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:08.591Z,1492148948.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:08.942Z,1492148948.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:08.958Z,1492148948.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:09.349Z,1492148949.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:09.370Z,1492148949.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:09.736Z,1492148949.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:09.774Z,1492148949.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:10.175Z,1492148950.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:10.227Z,1492148950.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:10.550Z,1492148950.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:10.582Z,1492148950.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:10.972Z,1492148950.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:11.032Z,1492148951.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:11.354Z,1492148951.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:11.425Z,1492148951.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:11.600Z,1492148951.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:11.749Z,1492148951.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:11.786Z,1492148951.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:12.137Z,1492148952.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:12.158Z,1492148952.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:12.396Z,1492148952.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:12.543Z,1492148952.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:12.578Z,1492148952.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:12.800Z,1492148952.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:12.951Z,1492148952.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:12.967Z,1492148952.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:13.351Z,1492148953.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:13.367Z,1492148953.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:13.731Z,1492148953.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:13.776Z,1492148953.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:14.136Z,1492148954.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:14.170Z,1492148954.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:14.544Z,1492148954.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:14.594Z,1492148954.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:14.942Z,1492148954.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:14.958Z,1492148954.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:15.329Z,1492148955.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:15.363Z,1492148955.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:19.259Z,1492148959.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:19.355Z,1492148959.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:19.453Z,1492148959.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:19.481Z,1492148959.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:19.846Z,1492148959.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:19.867Z,1492148959.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:20.243Z,1492148960.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:20.298Z,1492148960.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:20.651Z,1492148960.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:20.698Z,1492148960.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:21.041Z,1492148961.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:21.089Z,1492148961.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:21.444Z,1492148961.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:21.490Z,1492148961.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:21.841Z,1492148961.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:21.857Z,1492148961.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:22.241Z,1492148962.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:22.265Z,1492148962.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:22.643Z,1492148962.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:22.658Z,1492148962.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:23.045Z,1492148963.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:23.060Z,1492148963.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:23.441Z,1492148963.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:23.462Z,1492148963.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:23.830Z,1492148963.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:23.865Z,1492148963.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:24.242Z,1492148964.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:24.258Z,1492148964.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:24.633Z,1492148964.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:24.669Z,1492148964.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:25.037Z,1492148965.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:25.063Z,1492148965.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:25.433Z,1492148965.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:25.466Z,1492148965.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:25.833Z,1492148965.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:25.865Z,1492148965.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:26.230Z,1492148966.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:26.258Z,1492148966.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:26.642Z,1492148966.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:26.680Z,1492148966.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:27.045Z,1492148967.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:27.081Z,1492148967.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:27.441Z,1492148967.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:27.456Z,1492148967.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:27.841Z,1492148967.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:27.857Z,1492148967.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:28.241Z,1492148968.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:28.256Z,1492148968.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:28.646Z,1492148968.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:28.662Z,1492148968.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:29.046Z,1492148969.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:29.066Z,1492148969.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:29.447Z,1492148969.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:29.463Z,1492148969.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:29.847Z,1492148969.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:29.862Z,1492148969.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:30.243Z,1492148970.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:30.265Z,1492148970.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:30.637Z,1492148970.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:30.669Z,1492148970.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:31.040Z,1492148971.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:31.071Z,1492148971.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:31.446Z,1492148971.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:31.462Z,1492148971.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:31.854Z,1492148971.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:31.870Z,1492148971.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:32.233Z,1492148972.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:32.266Z,1492148972.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:32.650Z,1492148972.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:32.659Z,1492148972.659 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:49:32.659Z,1492148972.659 [BPC1] Data Fault, FailCount= 1
2017-04-14T05:49:32.659Z,1492148972.659 [BPC1](ERROR): Data Fault
2017-04-14T05:49:32.668Z,1492148972.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:32.704Z,1492148972.704 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:49:33.033Z,1492148973.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:33.088Z,1492148973.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:33.433Z,1492148973.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:33.462Z,1492148973.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:33.838Z,1492148973.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:33.854Z,1492148973.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:33.874Z,1492148973.874 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:49:33.874Z,1492148973.874 [BPC1] No Fault, FailCount= 1
2017-04-14T05:49:34.233Z,1492148974.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:34.310Z,1492148974.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:34.633Z,1492148974.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:34.676Z,1492148974.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:35.037Z,1492148975.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:35.064Z,1492148975.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:35.435Z,1492148975.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:35.470Z,1492148975.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:35.839Z,1492148975.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:35.865Z,1492148975.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:36.253Z,1492148976.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:36.269Z,1492148976.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:36.633Z,1492148976.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:36.682Z,1492148976.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:37.033Z,1492148977.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:37.048Z,1492148977.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:37.438Z,1492148977.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:37.454Z,1492148977.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:37.845Z,1492148977.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:37.860Z,1492148977.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:38.234Z,1492148978.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:38.249Z,1492148978.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:38.633Z,1492148978.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:38.678Z,1492148978.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:39.033Z,1492148979.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:39.074Z,1492148979.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:39.437Z,1492148979.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:39.476Z,1492148979.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:39.835Z,1492148979.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:39.884Z,1492148979.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:40.238Z,1492148980.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:40.253Z,1492148980.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:40.633Z,1492148980.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:40.668Z,1492148980.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:41.033Z,1492148981.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:41.060Z,1492148981.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:41.433Z,1492148981.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:41.470Z,1492148981.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:41.833Z,1492148981.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:41.866Z,1492148981.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:42.253Z,1492148982.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:42.274Z,1492148982.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:42.637Z,1492148982.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:42.664Z,1492148982.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:43.033Z,1492148983.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:43.069Z,1492148983.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:43.433Z,1492148983.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:43.466Z,1492148983.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:43.833Z,1492148983.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:43.878Z,1492148983.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:44.237Z,1492148984.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:44.271Z,1492148984.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:44.653Z,1492148984.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:44.674Z,1492148984.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:45.037Z,1492148985.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:45.070Z,1492148985.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:45.449Z,1492148985.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:45.465Z,1492148985.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:45.849Z,1492148985.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:45.866Z,1492148985.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:46.238Z,1492148986.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:46.276Z,1492148986.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:46.633Z,1492148986.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:46.648Z,1492148986.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:47.041Z,1492148987.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:47.082Z,1492148987.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:47.438Z,1492148987.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:47.458Z,1492148987.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:47.838Z,1492148987.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:47.853Z,1492148987.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:48.249Z,1492148988.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:48.280Z,1492148988.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:48.641Z,1492148988.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:48.682Z,1492148988.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:49.041Z,1492148989.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:49.056Z,1492148989.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:49.434Z,1492148989.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:49.450Z,1492148989.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:49.845Z,1492148989.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:49.853Z,1492148989.853 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:49:49.853Z,1492148989.853 [BPC1] Communications Fault, FailCount= 2
2017-04-14T05:49:49.853Z,1492148989.853 [BPC1](ERROR): Communications Fault
2017-04-14T05:49:49.862Z,1492148989.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:49.917Z,1492148989.917 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:49:50.242Z,1492148990.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:50.262Z,1492148990.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:50.647Z,1492148990.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:50.663Z,1492148990.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:51.041Z,1492148991.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:51.056Z,1492148991.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:51.095Z,1492148991.095 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:49:51.096Z,1492148991.096 [BPC1] No Fault, FailCount= 2
2017-04-14T05:49:51.448Z,1492148991.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:51.526Z,1492148991.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:51.849Z,1492148991.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:51.865Z,1492148991.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:52.233Z,1492148992.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:52.333Z,1492148992.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:52.633Z,1492148992.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:52.677Z,1492148992.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:53.038Z,1492148993.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:53.070Z,1492148993.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:53.443Z,1492148993.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:53.463Z,1492148993.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:53.846Z,1492148993.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:53.866Z,1492148993.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:54.249Z,1492148994.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:54.345Z,1492148994.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:54.638Z,1492148994.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:54.674Z,1492148994.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:55.038Z,1492148995.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:55.071Z,1492148995.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:55.434Z,1492148995.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:55.489Z,1492148995.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:55.845Z,1492148995.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:55.872Z,1492148995.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:56.243Z,1492148996.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:56.258Z,1492148996.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:56.638Z,1492148996.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:56.669Z,1492148996.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:57.053Z,1492148997.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:57.085Z,1492148997.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:57.450Z,1492148997.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:57.488Z,1492148997.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:57.838Z,1492148997.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:57.854Z,1492148997.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:58.253Z,1492148998.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:58.288Z,1492148998.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:58.643Z,1492148998.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:58.659Z,1492148998.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:59.043Z,1492148999.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:59.059Z,1492148999.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:59.445Z,1492148999.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:59.468Z,1492148999.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:49:59.851Z,1492148999.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:49:59.891Z,1492148999.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:00.243Z,1492149000.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:00.264Z,1492149000.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:00.641Z,1492149000.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:00.661Z,1492149000.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:01.045Z,1492149001.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:01.062Z,1492149001.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:01.445Z,1492149001.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:01.472Z,1492149001.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:01.874Z,1492149001.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:01.985Z,1492149001.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:02.235Z,1492149002.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:02.278Z,1492149002.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:02.654Z,1492149002.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:02.672Z,1492149002.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:03.040Z,1492149003.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:03.072Z,1492149003.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:03.434Z,1492149003.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:03.450Z,1492149003.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:03.848Z,1492149003.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:03.886Z,1492149003.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:04.247Z,1492149004.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:04.311Z,1492149004.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:04.635Z,1492149004.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:04.670Z,1492149004.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:05.038Z,1492149005.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:05.084Z,1492149005.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:05.439Z,1492149005.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:05.462Z,1492149005.462 [BPC1](ERROR): Failed to parse message.
2017-04-14T05:50:05.462Z,1492149005.462 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T05:50:05.462Z,1492149005.462 [BPC1] Data Fault, FailCount= 3
2017-04-14T05:50:05.462Z,1492149005.462 [BPC1](ERROR): Data Fault
2017-04-14T05:50:05.487Z,1492149005.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:05.569Z,1492149005.569 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T05:50:05.863Z,1492149005.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:05.902Z,1492149005.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:06.242Z,1492149006.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:06.402Z,1492149006.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:06.649Z,1492149006.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:06.665Z,1492149006.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:06.706Z,1492149006.706 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:50:06.706Z,1492149006.706 [BPC1] No Fault, FailCount= 3
2017-04-14T05:50:07.042Z,1492149007.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:07.107Z,1492149007.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:07.441Z,1492149007.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:07.502Z,1492149007.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:07.841Z,1492149007.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:07.857Z,1492149007.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:08.256Z,1492149008.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:08.369Z,1492149008.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:08.641Z,1492149008.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:08.666Z,1492149008.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:09.058Z,1492149009.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:09.082Z,1492149009.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:09.117Z,1492149009.117 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:09.117Z,1492149009.117 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:50:09.117Z,1492149009.117 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:50:09.132Z,1492149009.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:50:09.445Z,1492149009.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:09.461Z,1492149009.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:09.479Z,1492149009.479 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:50:09.479Z,1492149009.479 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:50:09.830Z,1492149009.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:09.867Z,1492149009.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:09.873Z,1492149009.873 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:50:09.873Z,1492149009.874 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:50:09.874Z,1492149009.874 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:50:10.241Z,1492149010.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:10.257Z,1492149010.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:10.642Z,1492149010.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:10.657Z,1492149010.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:11.034Z,1492149011.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:11.050Z,1492149011.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:11.444Z,1492149011.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:11.460Z,1492149011.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:11.834Z,1492149011.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:11.849Z,1492149011.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:12.233Z,1492149012.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:12.261Z,1492149012.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:12.647Z,1492149012.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:12.663Z,1492149012.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:13.033Z,1492149013.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:13.059Z,1492149013.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:13.433Z,1492149013.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:13.459Z,1492149013.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:13.833Z,1492149013.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:13.859Z,1492149013.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:14.236Z,1492149014.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:14.268Z,1492149014.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:14.288Z,1492149014.288 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:50:14.289Z,1492149014.289 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:50:14.289Z,1492149014.289 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:50:14.289Z,1492149014.289 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:50:14.642Z,1492149014.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:14.658Z,1492149014.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:14.667Z,1492149014.667 [Default:CheckIn:D] Stopped
2017-04-14T05:50:14.667Z,1492149014.667 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:50:15.042Z,1492149015.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:15.062Z,1492149015.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:15.072Z,1492149015.072 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.155811 min 
2017-04-14T05:50:15.072Z,1492149015.072 [Default:CheckIn:E] Stopped
2017-04-14T05:50:15.072Z,1492149015.072 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:50:15.072Z,1492149015.072 [Default:CheckIn] Stopped
2017-04-14T05:50:15.072Z,1492149015.072 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:50:15.073Z,1492149015.073 [Default:CheckIn](INFO): Running loop #22
2017-04-14T05:50:15.073Z,1492149015.073 [Default:CheckIn] Running Loop=22
2017-04-14T05:50:15.073Z,1492149015.073 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:50:15.073Z,1492149015.073 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:50:15.470Z,1492149015.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:15.518Z,1492149015.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:20.426Z,1492149020.426 [NAL9602](INFO): Powering up
2017-04-14T05:50:20.458Z,1492149020.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:20.566Z,1492149020.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:20.664Z,1492149020.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:20.698Z,1492149020.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:21.061Z,1492149021.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:21.122Z,1492149021.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:21.473Z,1492149021.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:21.510Z,1492149021.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:21.883Z,1492149021.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:21.931Z,1492149021.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:22.329Z,1492149022.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:22.420Z,1492149022.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:22.643Z,1492149022.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:22.684Z,1492149022.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:23.062Z,1492149023.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:23.079Z,1492149023.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:23.456Z,1492149023.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:23.505Z,1492149023.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:23.864Z,1492149023.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:23.970Z,1492149023.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:24.262Z,1492149024.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:24.304Z,1492149024.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:24.662Z,1492149024.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:24.735Z,1492149024.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:25.050Z,1492149025.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:25.101Z,1492149025.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:25.465Z,1492149025.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:25.518Z,1492149025.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:25.942Z,1492149025.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:25.982Z,1492149025.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:26.248Z,1492149026.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:26.277Z,1492149026.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:26.683Z,1492149026.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:26.731Z,1492149026.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:27.068Z,1492149027.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:27.102Z,1492149027.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:27.476Z,1492149027.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:27.525Z,1492149027.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:27.911Z,1492149027.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:28.088Z,1492149028.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:28.302Z,1492149028.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:28.356Z,1492149028.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:28.686Z,1492149028.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:28.744Z,1492149028.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:29.080Z,1492149029.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:29.152Z,1492149029.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:29.494Z,1492149029.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:29.527Z,1492149029.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:29.955Z,1492149029.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:30.010Z,1492149030.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:30.285Z,1492149030.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:30.308Z,1492149030.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:30.690Z,1492149030.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:30.706Z,1492149030.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:31.106Z,1492149031.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:31.141Z,1492149031.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:31.461Z,1492149031.461 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:50:31.489Z,1492149031.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:31.514Z,1492149031.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:31.895Z,1492149031.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:31.987Z,1492149031.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:32.306Z,1492149032.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:32.354Z,1492149032.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:32.700Z,1492149032.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:32.728Z,1492149032.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:33.107Z,1492149033.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:33.195Z,1492149033.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:33.481Z,1492149033.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:33.517Z,1492149033.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:33.891Z,1492149033.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:33.970Z,1492149033.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:34.296Z,1492149034.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:34.330Z,1492149034.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:34.698Z,1492149034.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:34.744Z,1492149034.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:35.096Z,1492149035.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:35.155Z,1492149035.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:35.481Z,1492149035.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:35.514Z,1492149035.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:35.907Z,1492149035.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:35.930Z,1492149035.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:36.316Z,1492149036.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:36.384Z,1492149036.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:36.691Z,1492149036.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:36.727Z,1492149036.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:37.100Z,1492149037.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:37.145Z,1492149037.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:37.496Z,1492149037.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:37.512Z,1492149037.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:37.958Z,1492149037.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:38.025Z,1492149038.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:38.278Z,1492149038.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:38.331Z,1492149038.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:38.677Z,1492149038.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:38.717Z,1492149038.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:39.092Z,1492149039.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:39.122Z,1492149039.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:39.483Z,1492149039.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:39.504Z,1492149039.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:39.977Z,1492149039.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:40.017Z,1492149040.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:40.296Z,1492149040.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:40.342Z,1492149040.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:40.689Z,1492149040.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:40.738Z,1492149040.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:41.086Z,1492149041.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:41.147Z,1492149041.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:41.502Z,1492149041.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:41.557Z,1492149041.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:41.964Z,1492149041.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:41.997Z,1492149041.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:42.280Z,1492149042.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:42.331Z,1492149042.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:42.677Z,1492149042.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:42.698Z,1492149042.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:43.087Z,1492149043.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:43.121Z,1492149043.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:43.485Z,1492149043.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:43.526Z,1492149043.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:43.955Z,1492149043.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:44.014Z,1492149044.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:44.304Z,1492149044.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:44.352Z,1492149044.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:44.706Z,1492149044.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:44.726Z,1492149044.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:45.086Z,1492149045.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:45.130Z,1492149045.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:45.481Z,1492149045.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:45.540Z,1492149045.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:45.885Z,1492149045.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:46.015Z,1492149046.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:46.297Z,1492149046.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:46.318Z,1492149046.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:46.681Z,1492149046.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:46.706Z,1492149046.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:47.084Z,1492149047.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:47.153Z,1492149047.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:47.180Z,1492149047.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:47.485Z,1492149047.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:47.507Z,1492149047.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:47.890Z,1492149047.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:47.960Z,1492149047.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:47.976Z,1492149047.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:48.340Z,1492149048.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:48.414Z,1492149048.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:48.709Z,1492149048.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:48.724Z,1492149048.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:49.098Z,1492149049.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:49.114Z,1492149049.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:49.478Z,1492149049.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:49.505Z,1492149049.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:49.913Z,1492149049.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:49.931Z,1492149049.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:50.280Z,1492149050.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:50.367Z,1492149050.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:50.686Z,1492149050.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:50.710Z,1492149050.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:51.077Z,1492149051.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:51.097Z,1492149051.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:51.481Z,1492149051.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:51.514Z,1492149051.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:51.924Z,1492149051.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:51.982Z,1492149051.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:52.312Z,1492149052.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:52.361Z,1492149052.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:52.720Z,1492149052.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:52.757Z,1492149052.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:53.089Z,1492149053.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:53.105Z,1492149053.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:53.105Z,1492149053.105 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:50:53.105Z,1492149053.105 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:50:53.112Z,1492149053.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:53.112Z,1492149053.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:50:53.112Z,1492149053.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:50:53.176Z,1492149053.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:50:53.177Z,1492149053.177 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:50:53.477Z,1492149053.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:53.531Z,1492149053.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:50:53.531Z,1492149053.531 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:50:53.532Z,1492149053.532 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:50:53.532Z,1492149053.532 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:50:53.921Z,1492149053.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:53.964Z,1492149053.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:50:53.965Z,1492149053.964 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:50:53.965Z,1492149053.965 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:50:53.978Z,1492149053.978 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:50:53.978Z,1492149053.978 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:50:53.979Z,1492149053.979 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:50:54.284Z,1492149054.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:54.349Z,1492149054.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:54.686Z,1492149054.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:54.710Z,1492149054.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:55.089Z,1492149055.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:55.135Z,1492149055.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:55.502Z,1492149055.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:55.554Z,1492149055.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:55.922Z,1492149055.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:55.987Z,1492149055.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:56.320Z,1492149056.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:56.378Z,1492149056.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:56.728Z,1492149056.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:56.782Z,1492149056.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:57.098Z,1492149057.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:57.146Z,1492149057.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:57.486Z,1492149057.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:57.550Z,1492149057.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:57.924Z,1492149057.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:58.008Z,1492149058.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:58.288Z,1492149058.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:58.337Z,1492149058.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:58.685Z,1492149058.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:58.714Z,1492149058.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:59.078Z,1492149059.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:59.156Z,1492149059.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:59.480Z,1492149059.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:50:59.531Z,1492149059.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:50:59.890Z,1492149059.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:00.000Z,1492149060.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:00.289Z,1492149060.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:00.362Z,1492149060.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:00.685Z,1492149060.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:00.706Z,1492149060.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:01.088Z,1492149061.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:01.146Z,1492149061.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:01.491Z,1492149061.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:01.549Z,1492149061.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:01.889Z,1492149061.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:01.904Z,1492149061.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:02.291Z,1492149062.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:02.358Z,1492149062.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:02.678Z,1492149062.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:02.718Z,1492149062.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:03.083Z,1492149063.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:03.124Z,1492149063.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:03.486Z,1492149063.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:03.538Z,1492149063.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:03.883Z,1492149063.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:03.899Z,1492149063.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:04.292Z,1492149064.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:04.314Z,1492149064.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:04.684Z,1492149064.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:04.716Z,1492149064.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:05.082Z,1492149065.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:05.109Z,1492149065.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:05.505Z,1492149065.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:05.528Z,1492149065.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:05.922Z,1492149065.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:05.959Z,1492149065.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:06.280Z,1492149066.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:06.320Z,1492149066.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:06.677Z,1492149066.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:06.714Z,1492149066.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:07.082Z,1492149067.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:07.118Z,1492149067.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:07.507Z,1492149067.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:07.577Z,1492149067.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:07.945Z,1492149067.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:08.007Z,1492149068.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:08.328Z,1492149068.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:08.368Z,1492149068.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:08.688Z,1492149068.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:08.734Z,1492149068.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:09.091Z,1492149069.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:09.108Z,1492149069.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:09.501Z,1492149069.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:09.557Z,1492149069.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:09.942Z,1492149069.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:09.979Z,1492149069.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:10.312Z,1492149070.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:10.333Z,1492149070.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:10.682Z,1492149070.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:10.718Z,1492149070.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:11.085Z,1492149071.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:11.112Z,1492149071.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:11.481Z,1492149071.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:11.527Z,1492149071.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:11.928Z,1492149071.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:11.987Z,1492149071.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:12.297Z,1492149072.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:12.354Z,1492149072.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:12.692Z,1492149072.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:12.708Z,1492149072.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:13.088Z,1492149073.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:13.145Z,1492149073.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:13.504Z,1492149073.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:13.543Z,1492149073.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:13.955Z,1492149073.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:13.962Z,1492149073.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x2431 got:0x31031
2017-04-14T05:51:14.006Z,1492149074.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:14.293Z,1492149074.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:14.329Z,1492149074.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:14.697Z,1492149074.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:14.754Z,1492149074.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:15.088Z,1492149075.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:15.110Z,1492149075.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:15.489Z,1492149075.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:15.505Z,1492149075.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:19.332Z,1492149079.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:19.354Z,1492149079.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:19.468Z,1492149079.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:19.528Z,1492149079.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:19.910Z,1492149079.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:19.958Z,1492149079.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:20.257Z,1492149080.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:20.287Z,1492149080.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:20.666Z,1492149080.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:20.682Z,1492149080.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:21.064Z,1492149081.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:21.080Z,1492149081.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:21.454Z,1492149081.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:21.543Z,1492149081.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:21.926Z,1492149081.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:22.008Z,1492149082.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:22.322Z,1492149082.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:22.373Z,1492149082.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:22.669Z,1492149082.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:22.723Z,1492149082.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:23.087Z,1492149083.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:23.136Z,1492149083.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:23.492Z,1492149083.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:23.545Z,1492149083.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:23.889Z,1492149083.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:23.957Z,1492149083.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:24.261Z,1492149084.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:24.310Z,1492149084.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:24.661Z,1492149084.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:24.709Z,1492149084.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:25.056Z,1492149085.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:25.105Z,1492149085.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:25.469Z,1492149085.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:25.594Z,1492149085.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:25.969Z,1492149085.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:26.062Z,1492149086.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:26.275Z,1492149086.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:26.371Z,1492149086.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:26.687Z,1492149086.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:26.735Z,1492149086.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:27.113Z,1492149087.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:27.223Z,1492149087.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:27.478Z,1492149087.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:27.562Z,1492149087.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:27.941Z,1492149087.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:27.985Z,1492149087.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:28.262Z,1492149088.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:28.318Z,1492149088.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:28.676Z,1492149088.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:28.722Z,1492149088.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:29.071Z,1492149089.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:29.094Z,1492149089.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:29.484Z,1492149089.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:29.529Z,1492149089.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:29.865Z,1492149089.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:29.921Z,1492149089.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:30.272Z,1492149090.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:30.322Z,1492149090.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:30.693Z,1492149090.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:30.708Z,1492149090.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:31.051Z,1492149091.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:31.098Z,1492149091.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:31.460Z,1492149091.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:31.492Z,1492149091.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:31.858Z,1492149091.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:31.874Z,1492149091.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:32.261Z,1492149092.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:32.320Z,1492149092.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:32.658Z,1492149092.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:32.693Z,1492149092.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:33.053Z,1492149093.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:33.086Z,1492149093.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:33.455Z,1492149093.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:33.471Z,1492149093.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:33.865Z,1492149093.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:33.938Z,1492149093.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:34.270Z,1492149094.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:34.301Z,1492149094.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:34.670Z,1492149094.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:34.713Z,1492149094.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:35.062Z,1492149095.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:35.080Z,1492149095.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:35.465Z,1492149095.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:35.534Z,1492149095.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:35.893Z,1492149095.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:35.958Z,1492149095.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:36.288Z,1492149096.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:36.323Z,1492149096.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:36.654Z,1492149096.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:36.706Z,1492149096.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:37.081Z,1492149097.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:37.117Z,1492149097.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:37.497Z,1492149097.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:37.542Z,1492149097.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:37.931Z,1492149097.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:37.966Z,1492149097.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:38.255Z,1492149098.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:38.355Z,1492149098.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:38.654Z,1492149098.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:38.717Z,1492149098.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:39.069Z,1492149099.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:39.114Z,1492149099.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:39.506Z,1492149099.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:39.547Z,1492149099.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:39.856Z,1492149099.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:39.937Z,1492149099.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:40.275Z,1492149100.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:40.334Z,1492149100.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:40.661Z,1492149100.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:40.706Z,1492149100.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:41.059Z,1492149101.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:41.093Z,1492149101.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:41.482Z,1492149101.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:41.518Z,1492149101.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:41.906Z,1492149101.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:41.956Z,1492149101.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:42.268Z,1492149102.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:42.308Z,1492149102.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:42.667Z,1492149102.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:42.711Z,1492149102.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:43.062Z,1492149103.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:43.100Z,1492149103.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:43.453Z,1492149103.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:43.507Z,1492149103.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:43.869Z,1492149103.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:43.894Z,1492149103.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:44.265Z,1492149104.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:44.311Z,1492149104.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:44.674Z,1492149104.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:44.718Z,1492149104.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:45.107Z,1492149105.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:45.166Z,1492149105.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:45.465Z,1492149105.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:45.507Z,1492149105.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:45.865Z,1492149105.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:45.915Z,1492149105.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:46.256Z,1492149106.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:46.324Z,1492149106.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:46.655Z,1492149106.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:46.744Z,1492149106.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:47.085Z,1492149107.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:47.137Z,1492149107.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:47.453Z,1492149107.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:47.518Z,1492149107.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:47.863Z,1492149107.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:47.930Z,1492149107.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:48.299Z,1492149108.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:48.333Z,1492149108.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:48.721Z,1492149108.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:48.785Z,1492149108.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:49.088Z,1492149109.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:49.125Z,1492149109.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:49.542Z,1492149109.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:49.600Z,1492149109.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:49.892Z,1492149109.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:49.964Z,1492149109.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:50.274Z,1492149110.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:50.332Z,1492149110.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:50.660Z,1492149110.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:50.726Z,1492149110.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:51.094Z,1492149111.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:51.210Z,1492149111.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:51.474Z,1492149111.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:51.498Z,1492149111.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:51.879Z,1492149111.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:51.974Z,1492149111.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:52.258Z,1492149112.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:52.302Z,1492149112.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:52.653Z,1492149112.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:52.736Z,1492149112.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:53.067Z,1492149113.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:53.120Z,1492149113.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:53.468Z,1492149113.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:53.498Z,1492149113.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:53.856Z,1492149113.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:53.938Z,1492149113.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:54.268Z,1492149114.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:54.294Z,1492149114.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:54.669Z,1492149114.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:54.701Z,1492149114.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:55.065Z,1492149115.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:55.110Z,1492149115.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:55.468Z,1492149115.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:55.504Z,1492149115.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:55.903Z,1492149115.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:55.940Z,1492149115.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:56.269Z,1492149116.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:56.285Z,1492149116.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:56.659Z,1492149116.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:56.698Z,1492149116.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:57.058Z,1492149117.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:57.112Z,1492149117.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:57.495Z,1492149117.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:57.518Z,1492149117.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:57.892Z,1492149117.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:57.908Z,1492149117.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:58.268Z,1492149118.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:58.330Z,1492149118.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:58.672Z,1492149118.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:58.703Z,1492149118.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:59.064Z,1492149119.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:59.114Z,1492149119.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:59.486Z,1492149119.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:59.525Z,1492149119.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:51:59.871Z,1492149119.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:51:59.888Z,1492149119.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:00.284Z,1492149120.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:00.299Z,1492149120.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:00.658Z,1492149120.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:00.686Z,1492149120.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:01.084Z,1492149121.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:01.125Z,1492149121.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:01.471Z,1492149121.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:01.503Z,1492149121.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:01.884Z,1492149121.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:01.918Z,1492149121.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:02.269Z,1492149122.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:02.298Z,1492149122.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:02.665Z,1492149122.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:02.701Z,1492149122.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:03.065Z,1492149123.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:03.110Z,1492149123.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:03.468Z,1492149123.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:03.501Z,1492149123.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:03.895Z,1492149123.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:04.063Z,1492149124.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:04.273Z,1492149124.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:04.337Z,1492149124.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:04.662Z,1492149124.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:04.774Z,1492149124.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:05.070Z,1492149125.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:05.122Z,1492149125.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:05.513Z,1492149125.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:05.636Z,1492149125.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:05.922Z,1492149125.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:06.019Z,1492149126.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:06.272Z,1492149126.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:06.309Z,1492149126.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:06.690Z,1492149126.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:06.777Z,1492149126.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:07.132Z,1492149127.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:07.194Z,1492149127.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:07.484Z,1492149127.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:07.604Z,1492149127.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:07.946Z,1492149127.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:08.068Z,1492149128.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:08.380Z,1492149128.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:08.469Z,1492149128.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:08.740Z,1492149128.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:08.789Z,1492149128.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:09.087Z,1492149129.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:09.156Z,1492149129.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:09.471Z,1492149129.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:09.608Z,1492149129.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:09.881Z,1492149129.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:09.949Z,1492149129.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:10.273Z,1492149130.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:10.322Z,1492149130.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:10.683Z,1492149130.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:10.721Z,1492149130.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:11.079Z,1492149131.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:11.112Z,1492149131.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:11.502Z,1492149131.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:11.518Z,1492149131.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:11.869Z,1492149131.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:11.925Z,1492149131.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:12.278Z,1492149132.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:12.328Z,1492149132.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:12.690Z,1492149132.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:12.731Z,1492149132.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:13.098Z,1492149133.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:13.139Z,1492149133.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:13.501Z,1492149133.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:13.559Z,1492149133.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:13.882Z,1492149133.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:13.905Z,1492149133.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:14.284Z,1492149134.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:14.310Z,1492149134.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:14.671Z,1492149134.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:14.710Z,1492149134.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:15.104Z,1492149135.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:15.128Z,1492149135.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:15.498Z,1492149135.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:15.554Z,1492149135.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:15.894Z,1492149135.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:15.961Z,1492149135.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:21.408Z,1492149141.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:21.464Z,1492149141.464 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:52:21.464Z,1492149141.464 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:52:21.464Z,1492149141.464 [BPC1](ERROR): Communications Fault
2017-04-14T05:52:21.533Z,1492149141.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:21.607Z,1492149141.607 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:52:21.607Z,1492149141.607 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T05:52:21.801Z,1492149141.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:21.912Z,1492149141.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:22.124Z,1492149142.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:22.213Z,1492149142.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:22.467Z,1492149142.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:22.556Z,1492149142.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:22.646Z,1492149142.646 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:52:22.646Z,1492149142.646 [BPC1] No Fault, FailCount= 1
2017-04-14T05:52:22.872Z,1492149142.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:22.954Z,1492149142.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:23.334Z,1492149143.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:23.377Z,1492149143.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:23.674Z,1492149143.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:23.835Z,1492149143.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:24.095Z,1492149144.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:24.174Z,1492149144.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:24.484Z,1492149144.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:24.559Z,1492149144.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:24.931Z,1492149144.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:24.956Z,1492149144.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:25.291Z,1492149145.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:25.381Z,1492149145.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:25.712Z,1492149145.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:25.839Z,1492149145.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:26.298Z,1492149146.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:26.452Z,1492149146.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:26.762Z,1492149146.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:26.892Z,1492149146.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:27.174Z,1492149147.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:27.254Z,1492149147.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:27.528Z,1492149147.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:27.582Z,1492149147.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:27.930Z,1492149147.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:27.967Z,1492149147.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:28.346Z,1492149148.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:28.386Z,1492149148.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:28.739Z,1492149148.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:28.812Z,1492149148.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:29.226Z,1492149149.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:29.358Z,1492149149.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:29.807Z,1492149149.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:29.980Z,1492149149.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:30.243Z,1492149150.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:30.343Z,1492149150.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:30.618Z,1492149150.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:30.691Z,1492149150.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:30.990Z,1492149150.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:31.070Z,1492149151.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:31.368Z,1492149151.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:31.410Z,1492149151.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x37118 got:0x44352
2017-04-14T05:52:31.467Z,1492149151.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:31.782Z,1492149151.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:31.829Z,1492149151.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:32.180Z,1492149152.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:32.229Z,1492149152.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:32.586Z,1492149152.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:32.630Z,1492149152.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:32.995Z,1492149152.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:33.027Z,1492149153.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:33.381Z,1492149153.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:33.422Z,1492149153.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:33.789Z,1492149153.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:33.874Z,1492149153.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:34.252Z,1492149154.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:34.297Z,1492149154.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:34.567Z,1492149154.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:34.610Z,1492149154.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:34.994Z,1492149154.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:35.033Z,1492149155.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:35.375Z,1492149155.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:35.433Z,1492149155.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:35.854Z,1492149155.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:36.118Z,1492149156.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:36.288Z,1492149156.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:36.372Z,1492149156.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:36.688Z,1492149156.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:36.852Z,1492149156.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:37.094Z,1492149157.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:37.140Z,1492149157.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:37.518Z,1492149157.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:37.582Z,1492149157.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:37.899Z,1492149157.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:37.960Z,1492149157.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:38.303Z,1492149158.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:38.390Z,1492149158.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:38.665Z,1492149158.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:38.747Z,1492149158.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:39.077Z,1492149159.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:39.110Z,1492149159.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:39.478Z,1492149159.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:39.507Z,1492149159.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:39.873Z,1492149159.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:39.889Z,1492149159.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:40.268Z,1492149160.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:40.336Z,1492149160.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:40.669Z,1492149160.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:40.702Z,1492149160.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:41.068Z,1492149161.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:41.101Z,1492149161.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:41.491Z,1492149161.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:41.539Z,1492149161.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:41.892Z,1492149161.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:41.922Z,1492149161.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:42.276Z,1492149162.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:42.297Z,1492149162.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:42.685Z,1492149162.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:42.718Z,1492149162.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:43.115Z,1492149163.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:43.184Z,1492149163.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:43.469Z,1492149163.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:43.510Z,1492149163.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:43.892Z,1492149163.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:43.950Z,1492149163.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:44.271Z,1492149164.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:44.336Z,1492149164.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:44.674Z,1492149164.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:44.751Z,1492149164.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:45.065Z,1492149165.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:45.109Z,1492149165.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:45.509Z,1492149165.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:45.570Z,1492149165.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:45.881Z,1492149165.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:45.916Z,1492149165.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:46.278Z,1492149166.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:46.305Z,1492149166.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:46.681Z,1492149166.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:46.706Z,1492149166.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:47.081Z,1492149167.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:47.112Z,1492149167.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:47.476Z,1492149167.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:47.509Z,1492149167.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:47.875Z,1492149167.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:47.891Z,1492149167.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:48.273Z,1492149168.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:48.289Z,1492149168.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:48.685Z,1492149168.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:48.713Z,1492149168.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:49.066Z,1492149169.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:49.093Z,1492149169.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:49.466Z,1492149169.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:49.504Z,1492149169.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:49.902Z,1492149169.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:49.944Z,1492149169.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:50.297Z,1492149170.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:50.316Z,1492149170.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:50.673Z,1492149170.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:50.716Z,1492149170.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:51.069Z,1492149171.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:51.168Z,1492149171.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:51.473Z,1492149171.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:51.514Z,1492149171.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:51.877Z,1492149171.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:51.932Z,1492149171.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:52.278Z,1492149172.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:52.309Z,1492149172.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:52.689Z,1492149172.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:52.758Z,1492149172.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:53.077Z,1492149173.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:53.128Z,1492149173.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:53.479Z,1492149173.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:53.516Z,1492149173.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:53.875Z,1492149173.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:53.894Z,1492149173.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:54.292Z,1492149174.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:54.308Z,1492149174.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:54.668Z,1492149174.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:54.706Z,1492149174.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:55.070Z,1492149175.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:55.117Z,1492149175.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:55.482Z,1492149175.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:55.502Z,1492149175.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:55.879Z,1492149175.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:55.895Z,1492149175.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:56.265Z,1492149176.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:56.299Z,1492149176.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:56.688Z,1492149176.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:56.710Z,1492149176.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:57.073Z,1492149177.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:57.106Z,1492149177.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:57.476Z,1492149177.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:57.520Z,1492149177.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:57.878Z,1492149177.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:57.907Z,1492149177.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:58.278Z,1492149178.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:58.310Z,1492149178.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:58.676Z,1492149178.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:58.692Z,1492149178.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:59.072Z,1492149179.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:59.088Z,1492149179.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:59.478Z,1492149179.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:59.498Z,1492149179.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:52:59.887Z,1492149179.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:52:59.903Z,1492149179.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:00.273Z,1492149180.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:00.314Z,1492149180.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:00.689Z,1492149180.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:00.705Z,1492149180.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:01.067Z,1492149181.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:01.104Z,1492149181.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:01.471Z,1492149181.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:01.500Z,1492149181.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:01.868Z,1492149181.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:01.906Z,1492149181.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:02.278Z,1492149182.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:02.311Z,1492149182.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:02.682Z,1492149182.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:02.721Z,1492149182.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:03.072Z,1492149183.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:03.109Z,1492149183.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:03.477Z,1492149183.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:03.511Z,1492149183.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:03.876Z,1492149183.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:03.913Z,1492149183.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:04.269Z,1492149184.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:04.291Z,1492149184.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:04.683Z,1492149184.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:04.707Z,1492149184.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:05.066Z,1492149185.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:05.162Z,1492149185.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:05.469Z,1492149185.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:05.505Z,1492149185.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:05.865Z,1492149185.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:05.912Z,1492149185.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:06.269Z,1492149186.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:06.296Z,1492149186.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:06.684Z,1492149186.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:06.745Z,1492149186.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:07.067Z,1492149187.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:07.118Z,1492149187.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:07.466Z,1492149187.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:07.547Z,1492149187.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:07.867Z,1492149187.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:07.930Z,1492149187.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:08.279Z,1492149188.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:08.295Z,1492149188.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:08.684Z,1492149188.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:08.728Z,1492149188.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:09.067Z,1492149189.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:09.131Z,1492149189.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:09.488Z,1492149189.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:09.559Z,1492149189.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:09.907Z,1492149189.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:10.025Z,1492149190.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:10.079Z,1492149190.079 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:10.079Z,1492149190.079 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T05:53:10.079Z,1492149190.079 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:53:10.177Z,1492149190.177 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:53:10.285Z,1492149190.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:10.322Z,1492149190.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:10.406Z,1492149190.406 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:53:10.406Z,1492149190.406 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T05:53:10.679Z,1492149190.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:10.711Z,1492149190.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:10.717Z,1492149190.717 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:53:10.717Z,1492149190.717 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:53:10.718Z,1492149190.718 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:53:11.073Z,1492149191.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:11.121Z,1492149191.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:11.493Z,1492149191.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:11.571Z,1492149191.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:11.882Z,1492149191.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:11.952Z,1492149191.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:12.282Z,1492149192.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:12.333Z,1492149192.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:12.691Z,1492149192.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:12.740Z,1492149192.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:13.066Z,1492149193.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:13.095Z,1492149193.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:13.476Z,1492149193.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:13.497Z,1492149193.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:13.868Z,1492149193.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:13.897Z,1492149193.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:14.250Z,1492149194.250 [NAL9602](INFO): SBD MO Status=0, MOMSN=2115, MT Status=0, MTMSN=0
2017-04-14T05:53:14.250Z,1492149194.250 [NAL9602](INFO): No messages in MT queue
2017-04-14T05:53:14.267Z,1492149194.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:14.350Z,1492149194.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:14.678Z,1492149194.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:14.706Z,1492149194.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:15.076Z,1492149195.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:15.110Z,1492149195.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:15.457Z,1492149195.457 [NAL9602](INFO): GPS fix at 20170414T055328: (36.802346, -121.787127)
2017-04-14T05:53:15.474Z,1492149195.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:15.555Z,1492149195.555 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T05:53:15.555Z,1492149195.555 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T05:53:15.903Z,1492149195.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:15.919Z,1492149195.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:15.919Z,1492149195.919 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T05:53:15.919Z,1492149195.919 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:53:15.939Z,1492149195.939 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:15.939Z,1492149195.939 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T05:53:15.955Z,1492149195.955 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:53:15.979Z,1492149195.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:53:15.979Z,1492149195.980 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:53:16.352Z,1492149196.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:16.401Z,1492149196.401 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:53:16.402Z,1492149196.402 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T05:53:16.402Z,1492149196.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:53:16.402Z,1492149196.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T05:53:20.876Z,1492149200.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:20.940Z,1492149200.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:53:20.940Z,1492149200.940 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:53:20.941Z,1492149200.941 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:53:20.946Z,1492149200.945 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:53:20.946Z,1492149200.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:53:20.946Z,1492149200.946 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:53:21.396Z,1492149201.396 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0092.lzma
2017-04-14T05:53:21.426Z,1492149201.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:21.454Z,1492149201.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:21.574Z,1492149201.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:21.614Z,1492149201.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:21.906Z,1492149201.906 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0092.lzma.bak
2017-04-14T05:53:21.906Z,1492149201.906 [DataOverHttps](INFO): SBD MOMSN=4885257
2017-04-14T05:53:21.977Z,1492149201.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:22.076Z,1492149202.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:22.401Z,1492149202.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:22.425Z,1492149202.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:22.743Z,1492149202.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:22.783Z,1492149202.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:27.024Z,1492149207.024 [NAL9602](INFO): Powering down
2017-04-14T05:53:27.045Z,1492149207.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:27.127Z,1492149207.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:27.229Z,1492149207.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:27.292Z,1492149207.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:27.637Z,1492149207.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:27.709Z,1492149207.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:28.001Z,1492149208.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:28.054Z,1492149208.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:28.393Z,1492149208.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:28.435Z,1492149208.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:28.802Z,1492149208.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:28.819Z,1492149208.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:32.672Z,1492149212.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:32.702Z,1492149212.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:32.797Z,1492149212.797 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0093.lzma
2017-04-14T05:53:32.824Z,1492149212.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:32.869Z,1492149212.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:33.224Z,1492149213.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:33.239Z,1492149213.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:33.594Z,1492149213.594 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0093.lzma.bak
2017-04-14T05:53:33.594Z,1492149213.594 [DataOverHttps](INFO): SBD MOMSN=4885260
2017-04-14T05:53:33.673Z,1492149213.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:33.747Z,1492149213.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:34.044Z,1492149214.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:34.089Z,1492149214.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:34.100Z,1492149214.100 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T05:53:34.100Z,1492149214.100 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T05:53:34.100Z,1492149214.100 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T05:53:34.448Z,1492149214.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:34.486Z,1492149214.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:38.890Z,1492149218.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:38.963Z,1492149218.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:39.084Z,1492149219.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:39.192Z,1492149219.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:39.481Z,1492149219.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:39.501Z,1492149219.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:39.878Z,1492149219.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:39.948Z,1492149219.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:40.277Z,1492149220.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:40.314Z,1492149220.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:40.680Z,1492149220.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:40.732Z,1492149220.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:41.080Z,1492149221.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:41.140Z,1492149221.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:41.485Z,1492149221.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:41.503Z,1492149221.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:41.869Z,1492149221.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:41.904Z,1492149221.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:42.270Z,1492149222.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:42.305Z,1492149222.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:42.666Z,1492149222.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:42.715Z,1492149222.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:43.069Z,1492149223.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:43.130Z,1492149223.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:43.469Z,1492149223.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:43.485Z,1492149223.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:43.874Z,1492149223.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:43.891Z,1492149223.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:44.278Z,1492149224.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:44.295Z,1492149224.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:44.667Z,1492149224.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:44.702Z,1492149224.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:45.066Z,1492149225.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:45.094Z,1492149225.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:45.465Z,1492149225.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:45.500Z,1492149225.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:45.875Z,1492149225.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:45.911Z,1492149225.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:46.281Z,1492149226.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:46.308Z,1492149226.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:46.709Z,1492149226.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:46.729Z,1492149226.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:47.078Z,1492149227.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:47.121Z,1492149227.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:47.479Z,1492149227.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:47.517Z,1492149227.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:47.876Z,1492149227.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:47.894Z,1492149227.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:48.289Z,1492149228.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:48.310Z,1492149228.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:48.685Z,1492149228.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:48.740Z,1492149228.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:49.085Z,1492149229.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:49.101Z,1492149229.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:49.468Z,1492149229.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:49.502Z,1492149229.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:49.867Z,1492149229.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:49.992Z,1492149229.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:50.288Z,1492149230.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:50.311Z,1492149230.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:50.676Z,1492149230.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:50.694Z,1492149230.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:51.081Z,1492149231.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:51.103Z,1492149231.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:51.483Z,1492149231.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:51.508Z,1492149231.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:51.886Z,1492149231.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:51.986Z,1492149231.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:52.271Z,1492149232.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:52.313Z,1492149232.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:52.670Z,1492149232.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:52.704Z,1492149232.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:53.071Z,1492149233.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:53.114Z,1492149233.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:53.475Z,1492149233.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:53.591Z,1492149233.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:53.871Z,1492149233.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:53.887Z,1492149233.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:54.284Z,1492149234.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:54.371Z,1492149234.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:54.678Z,1492149234.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:54.694Z,1492149234.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:55.084Z,1492149235.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:55.138Z,1492149235.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:55.484Z,1492149235.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:55.503Z,1492149235.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:55.871Z,1492149235.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:55.962Z,1492149235.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:56.280Z,1492149236.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:56.297Z,1492149236.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:56.682Z,1492149236.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:56.701Z,1492149236.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:57.091Z,1492149237.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:57.108Z,1492149237.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:57.468Z,1492149237.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:57.498Z,1492149237.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:57.874Z,1492149237.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:57.904Z,1492149237.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:58.280Z,1492149238.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:58.300Z,1492149238.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:58.686Z,1492149238.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:58.701Z,1492149238.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:59.082Z,1492149239.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:59.097Z,1492149239.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:59.480Z,1492149239.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:59.497Z,1492149239.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:53:59.890Z,1492149239.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:53:59.911Z,1492149239.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:00.272Z,1492149240.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:00.303Z,1492149240.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:00.678Z,1492149240.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:00.694Z,1492149240.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:01.065Z,1492149241.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:01.106Z,1492149241.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:01.466Z,1492149241.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:01.509Z,1492149241.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:01.873Z,1492149241.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:01.906Z,1492149241.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:02.265Z,1492149242.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:02.303Z,1492149242.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:02.669Z,1492149242.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:02.701Z,1492149242.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:03.069Z,1492149243.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:03.102Z,1492149243.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:03.465Z,1492149243.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:03.496Z,1492149243.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:03.915Z,1492149243.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:03.984Z,1492149243.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:04.295Z,1492149244.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:04.312Z,1492149244.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:04.684Z,1492149244.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:04.701Z,1492149244.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:05.068Z,1492149245.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:05.096Z,1492149245.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:05.465Z,1492149245.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:05.492Z,1492149245.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:05.865Z,1492149245.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:05.976Z,1492149245.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:06.274Z,1492149246.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:06.290Z,1492149246.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:06.707Z,1492149246.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:06.780Z,1492149246.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:07.076Z,1492149247.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:07.140Z,1492149247.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:07.507Z,1492149247.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:07.647Z,1492149247.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:07.874Z,1492149247.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:07.964Z,1492149247.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:08.268Z,1492149248.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:08.305Z,1492149248.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:08.665Z,1492149248.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:08.682Z,1492149248.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:09.084Z,1492149249.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:09.154Z,1492149249.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:09.472Z,1492149249.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:09.488Z,1492149249.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:09.880Z,1492149249.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:09.935Z,1492149249.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:10.290Z,1492149250.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:10.338Z,1492149250.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:10.680Z,1492149250.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:10.744Z,1492149250.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:11.066Z,1492149251.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:11.097Z,1492149251.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:11.468Z,1492149251.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:11.506Z,1492149251.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:11.877Z,1492149251.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:11.913Z,1492149251.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:12.311Z,1492149252.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:12.363Z,1492149252.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:12.679Z,1492149252.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:12.757Z,1492149252.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:13.074Z,1492149253.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:13.095Z,1492149253.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:13.463Z,1492149253.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:13.502Z,1492149253.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:13.866Z,1492149253.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:13.882Z,1492149253.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:14.270Z,1492149254.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:14.286Z,1492149254.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:14.671Z,1492149254.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:14.686Z,1492149254.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:15.074Z,1492149255.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:15.091Z,1492149255.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:15.473Z,1492149255.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:15.488Z,1492149255.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:15.874Z,1492149255.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:15.890Z,1492149255.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:16.274Z,1492149256.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:16.290Z,1492149256.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:16.682Z,1492149256.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:16.697Z,1492149256.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:17.080Z,1492149257.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:17.098Z,1492149257.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:17.465Z,1492149257.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:17.497Z,1492149257.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:17.947Z,1492149257.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:17.997Z,1492149257.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:18.267Z,1492149258.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:18.313Z,1492149258.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:18.700Z,1492149258.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:18.732Z,1492149258.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:19.083Z,1492149259.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:19.100Z,1492149259.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:19.471Z,1492149259.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:19.495Z,1492149259.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:19.919Z,1492149259.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:19.979Z,1492149259.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:20.276Z,1492149260.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:20.309Z,1492149260.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:20.677Z,1492149260.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:20.709Z,1492149260.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:21.076Z,1492149261.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:21.101Z,1492149261.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:21.473Z,1492149261.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:21.547Z,1492149261.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:21.869Z,1492149261.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:21.892Z,1492149261.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:22.273Z,1492149262.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:22.289Z,1492149262.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:22.665Z,1492149262.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:22.734Z,1492149262.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:23.065Z,1492149263.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:23.128Z,1492149263.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:23.462Z,1492149263.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:23.478Z,1492149263.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:23.868Z,1492149263.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:23.902Z,1492149263.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:24.277Z,1492149264.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:24.430Z,1492149264.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:24.705Z,1492149264.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:24.738Z,1492149264.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:25.079Z,1492149265.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:25.135Z,1492149265.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:25.467Z,1492149265.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:25.599Z,1492149265.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:25.879Z,1492149265.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:25.905Z,1492149265.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:26.287Z,1492149266.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:26.307Z,1492149266.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:26.666Z,1492149266.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:26.697Z,1492149266.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:27.073Z,1492149267.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:27.102Z,1492149267.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:27.484Z,1492149267.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:27.585Z,1492149267.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:27.882Z,1492149267.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:27.962Z,1492149267.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:28.269Z,1492149268.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:28.305Z,1492149268.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:28.701Z,1492149268.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:28.760Z,1492149268.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:29.075Z,1492149269.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:29.091Z,1492149269.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:29.483Z,1492149269.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:29.508Z,1492149269.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:29.879Z,1492149269.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:29.906Z,1492149269.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:30.283Z,1492149270.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:30.329Z,1492149270.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:30.671Z,1492149270.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:30.687Z,1492149270.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:31.074Z,1492149271.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:31.102Z,1492149271.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:31.467Z,1492149271.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:31.501Z,1492149271.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:31.944Z,1492149271.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:31.992Z,1492149271.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:32.277Z,1492149272.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:32.311Z,1492149272.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:32.680Z,1492149272.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:32.713Z,1492149272.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:33.077Z,1492149273.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:33.117Z,1492149273.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:33.476Z,1492149273.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:33.494Z,1492149273.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:33.920Z,1492149273.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:33.993Z,1492149273.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:34.277Z,1492149274.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:34.300Z,1492149274.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:34.684Z,1492149274.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:34.751Z,1492149274.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:41.602Z,1492149281.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:41.790Z,1492149281.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:41.946Z,1492149281.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:42.029Z,1492149282.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:42.327Z,1492149282.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:42.345Z,1492149282.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:42.735Z,1492149282.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:42.764Z,1492149282.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:43.137Z,1492149283.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:43.163Z,1492149283.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:43.565Z,1492149283.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:43.680Z,1492149283.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:43.925Z,1492149283.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:44.001Z,1492149284.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:44.325Z,1492149284.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:44.388Z,1492149284.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:44.728Z,1492149284.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:44.780Z,1492149284.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:45.127Z,1492149285.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:45.144Z,1492149285.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:45.526Z,1492149285.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:45.554Z,1492149285.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:45.938Z,1492149285.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:45.983Z,1492149285.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:46.317Z,1492149286.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:46.352Z,1492149286.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:46.733Z,1492149286.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:46.754Z,1492149286.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:47.120Z,1492149287.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:47.156Z,1492149287.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:47.517Z,1492149287.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:47.553Z,1492149287.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:47.934Z,1492149287.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:47.979Z,1492149287.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:48.329Z,1492149288.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:48.369Z,1492149288.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:48.728Z,1492149288.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:48.788Z,1492149288.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:49.136Z,1492149289.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:49.152Z,1492149289.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:49.551Z,1492149289.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:49.599Z,1492149289.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:49.917Z,1492149289.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:49.944Z,1492149289.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:50.317Z,1492149290.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:50.354Z,1492149290.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:50.718Z,1492149290.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:50.751Z,1492149290.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:51.115Z,1492149291.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:51.142Z,1492149291.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:51.576Z,1492149291.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:51.660Z,1492149291.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:51.927Z,1492149291.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:51.967Z,1492149291.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:52.329Z,1492149292.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:52.368Z,1492149292.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:52.737Z,1492149292.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:52.775Z,1492149292.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:53.128Z,1492149293.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:53.150Z,1492149293.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:53.548Z,1492149293.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:53.641Z,1492149293.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:53.965Z,1492149293.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:54.014Z,1492149294.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:54.323Z,1492149294.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:54.384Z,1492149294.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:54.761Z,1492149294.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:54.816Z,1492149294.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:55.130Z,1492149295.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:55.189Z,1492149295.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:55.550Z,1492149295.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:55.641Z,1492149295.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:55.927Z,1492149295.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:55.964Z,1492149295.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:56.322Z,1492149296.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:56.426Z,1492149296.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:56.721Z,1492149296.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:56.772Z,1492149296.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:57.129Z,1492149297.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:57.145Z,1492149297.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:57.578Z,1492149297.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:57.723Z,1492149297.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:57.924Z,1492149297.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:57.995Z,1492149297.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:58.336Z,1492149298.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:58.413Z,1492149298.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:58.723Z,1492149298.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:58.770Z,1492149298.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:59.127Z,1492149299.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:59.162Z,1492149299.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:59.533Z,1492149299.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:59.562Z,1492149299.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:54:59.921Z,1492149299.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:54:59.981Z,1492149299.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:00.326Z,1492149300.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:00.368Z,1492149300.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:00.726Z,1492149300.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:00.757Z,1492149300.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:01.121Z,1492149301.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:01.138Z,1492149301.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:01.530Z,1492149301.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:01.547Z,1492149301.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:01.924Z,1492149301.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:01.969Z,1492149301.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:02.329Z,1492149302.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:02.362Z,1492149302.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:02.724Z,1492149302.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:02.758Z,1492149302.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:03.117Z,1492149303.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:03.133Z,1492149303.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:03.560Z,1492149303.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:03.601Z,1492149303.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:03.924Z,1492149303.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:03.959Z,1492149303.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:04.319Z,1492149304.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:04.396Z,1492149304.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:04.729Z,1492149304.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:04.745Z,1492149304.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:05.134Z,1492149305.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:05.162Z,1492149305.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:05.548Z,1492149305.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:05.614Z,1492149305.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:05.926Z,1492149305.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:06.014Z,1492149306.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:06.329Z,1492149306.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:06.371Z,1492149306.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:06.726Z,1492149306.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:06.826Z,1492149306.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:07.186Z,1492149307.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:07.260Z,1492149307.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:07.571Z,1492149307.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:07.641Z,1492149307.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:07.956Z,1492149307.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:08.005Z,1492149308.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:08.335Z,1492149308.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:08.404Z,1492149308.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:08.719Z,1492149308.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:08.785Z,1492149308.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:09.118Z,1492149309.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:09.150Z,1492149309.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:09.556Z,1492149309.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:09.654Z,1492149309.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:09.948Z,1492149309.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:09.989Z,1492149309.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:10.319Z,1492149310.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:10.390Z,1492149310.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:10.757Z,1492149310.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:10.869Z,1492149310.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:11.121Z,1492149311.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:11.215Z,1492149311.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:11.600Z,1492149311.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:11.689Z,1492149311.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:11.919Z,1492149311.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:11.000Z,1492149312.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:12.327Z,1492149312.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:12.394Z,1492149312.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:12.726Z,1492149312.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:12.785Z,1492149312.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:13.132Z,1492149313.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:13.202Z,1492149313.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:13.525Z,1492149313.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:13.580Z,1492149313.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:13.945Z,1492149313.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:14.010Z,1492149314.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:14.317Z,1492149314.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:14.361Z,1492149314.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:14.741Z,1492149314.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:14.762Z,1492149314.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:15.116Z,1492149315.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:15.159Z,1492149315.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:15.517Z,1492149315.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:15.560Z,1492149315.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:15.917Z,1492149315.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:16.011Z,1492149316.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:16.318Z,1492149316.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:16.340Z,1492149316.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:16.766Z,1492149316.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:16.806Z,1492149316.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:17.134Z,1492149317.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:17.165Z,1492149317.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:17.559Z,1492149317.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:17.585Z,1492149317.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:17.928Z,1492149317.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:17.945Z,1492149317.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:18.329Z,1492149318.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:18.378Z,1492149318.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:18.729Z,1492149318.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:18.774Z,1492149318.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:19.125Z,1492149319.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:19.149Z,1492149319.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:19.534Z,1492149319.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:19.599Z,1492149319.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:19.926Z,1492149319.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:19.968Z,1492149319.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:20.318Z,1492149320.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:20.352Z,1492149320.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:20.720Z,1492149320.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:20.799Z,1492149320.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:21.133Z,1492149321.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:21.165Z,1492149321.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:21.519Z,1492149321.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:21.573Z,1492149321.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:21.919Z,1492149321.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:21.982Z,1492149321.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:22.317Z,1492149322.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:22.378Z,1492149322.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:22.730Z,1492149322.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:22.746Z,1492149322.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:23.122Z,1492149323.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:23.160Z,1492149323.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:23.524Z,1492149323.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:23.571Z,1492149323.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:23.931Z,1492149323.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:23.980Z,1492149323.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:24.340Z,1492149324.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:24.375Z,1492149324.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:24.727Z,1492149324.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:24.762Z,1492149324.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:25.124Z,1492149325.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:25.152Z,1492149325.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:25.562Z,1492149325.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:25.702Z,1492149325.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:25.948Z,1492149325.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:26.062Z,1492149326.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:26.327Z,1492149326.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:26.358Z,1492149326.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:26.720Z,1492149326.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:26.818Z,1492149326.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:27.123Z,1492149327.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:27.162Z,1492149327.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:27.526Z,1492149327.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:27.578Z,1492149327.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:27.970Z,1492149327.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:28.026Z,1492149328.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:28.333Z,1492149328.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:28.370Z,1492149328.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:28.735Z,1492149328.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:28.771Z,1492149328.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:29.128Z,1492149329.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:29.160Z,1492149329.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:29.518Z,1492149329.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:29.554Z,1492149329.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:29.919Z,1492149329.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:29.970Z,1492149329.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:30.341Z,1492149330.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:30.358Z,1492149330.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:30.722Z,1492149330.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:30.748Z,1492149330.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:31.119Z,1492149331.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:31.154Z,1492149331.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:31.518Z,1492149331.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:31.556Z,1492149331.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:31.931Z,1492149331.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:31.963Z,1492149331.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:32.328Z,1492149332.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:32.345Z,1492149332.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:32.726Z,1492149332.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:32.748Z,1492149332.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:33.130Z,1492149333.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:33.146Z,1492149333.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:33.534Z,1492149333.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:33.550Z,1492149333.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:33.942Z,1492149333.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:33.992Z,1492149333.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:34.332Z,1492149334.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:34.358Z,1492149334.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:34.732Z,1492149334.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:34.749Z,1492149334.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:38.706Z,1492149338.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:38.741Z,1492149338.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:38.821Z,1492149338.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:38.862Z,1492149338.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:39.205Z,1492149339.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:39.221Z,1492149339.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:39.608Z,1492149339.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:39.624Z,1492149339.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:40.006Z,1492149340.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:40.087Z,1492149340.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:40.406Z,1492149340.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:40.467Z,1492149340.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:40.793Z,1492149340.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:40.829Z,1492149340.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:41.194Z,1492149341.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:41.299Z,1492149341.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:41.620Z,1492149341.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:41.666Z,1492149341.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:41.993Z,1492149341.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:42.076Z,1492149342.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:42.409Z,1492149342.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:42.455Z,1492149342.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:42.804Z,1492149342.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:42.866Z,1492149342.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:43.001Z,1492149343.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:43.195Z,1492149343.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:43.253Z,1492149343.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:43.609Z,1492149343.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:43.641Z,1492149343.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:43.796Z,1492149343.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:44.005Z,1492149344.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:44.061Z,1492149344.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:44.216Z,1492149344.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:44.403Z,1492149344.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:44.419Z,1492149344.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:44.801Z,1492149344.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:44.817Z,1492149344.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:45.202Z,1492149345.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:45.222Z,1492149345.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:45.602Z,1492149345.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:45.622Z,1492149345.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:46.009Z,1492149346.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:46.025Z,1492149346.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:46.404Z,1492149346.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:46.420Z,1492149346.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:46.806Z,1492149346.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:46.821Z,1492149346.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:47.203Z,1492149347.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:47.228Z,1492149347.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:47.617Z,1492149347.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:47.632Z,1492149347.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:48.016Z,1492149348.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:48.032Z,1492149348.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:48.392Z,1492149348.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:48.421Z,1492149348.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:48.793Z,1492149348.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:48.831Z,1492149348.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:49.195Z,1492149349.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:49.239Z,1492149349.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:49.593Z,1492149349.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:49.626Z,1492149349.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:50.001Z,1492149350.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:50.035Z,1492149350.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:50.414Z,1492149350.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:50.429Z,1492149350.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:50.793Z,1492149350.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:50.828Z,1492149350.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:51.201Z,1492149351.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:51.227Z,1492149351.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:51.593Z,1492149351.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:51.631Z,1492149351.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:52.001Z,1492149352.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:52.028Z,1492149352.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:52.405Z,1492149352.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:52.453Z,1492149352.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:52.797Z,1492149352.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:52.830Z,1492149352.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:53.193Z,1492149353.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:53.225Z,1492149353.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:53.619Z,1492149353.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:53.635Z,1492149353.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:54.001Z,1492149354.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:54.032Z,1492149354.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:54.409Z,1492149354.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:54.499Z,1492149354.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:54.805Z,1492149354.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:54.821Z,1492149354.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:55.198Z,1492149355.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:55.214Z,1492149355.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:55.593Z,1492149355.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:55.642Z,1492149355.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:56.006Z,1492149356.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:56.038Z,1492149356.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:56.402Z,1492149356.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:56.534Z,1492149356.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:56.806Z,1492149356.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:56.863Z,1492149356.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:57.040Z,1492149357.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:57.220Z,1492149357.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:57.273Z,1492149357.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:57.600Z,1492149357.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:57.622Z,1492149357.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:57.836Z,1492149357.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:57.993Z,1492149357.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:58.030Z,1492149358.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:58.240Z,1492149358.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:58.397Z,1492149358.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:58.427Z,1492149358.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:58.794Z,1492149358.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:58.825Z,1492149358.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:59.191Z,1492149359.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:59.215Z,1492149359.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:55:59.595Z,1492149359.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:55:59.644Z,1492149359.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:00.004Z,1492149360.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:00.045Z,1492149360.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:00.400Z,1492149360.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:00.452Z,1492149360.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:00.801Z,1492149360.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:00.822Z,1492149360.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:01.195Z,1492149361.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:01.210Z,1492149361.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:01.637Z,1492149361.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:01.658Z,1492149361.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:01.993Z,1492149361.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:02.026Z,1492149362.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:02.393Z,1492149362.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:02.419Z,1492149362.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:02.793Z,1492149362.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:02.828Z,1492149362.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:03.209Z,1492149363.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:03.225Z,1492149363.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:03.602Z,1492149363.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:03.669Z,1492149363.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:03.998Z,1492149363.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:04.013Z,1492149364.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:04.402Z,1492149364.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:04.422Z,1492149364.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:04.806Z,1492149364.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:04.822Z,1492149364.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:05.201Z,1492149365.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:05.217Z,1492149365.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:05.610Z,1492149365.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:05.634Z,1492149365.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:05.996Z,1492149365.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:06.026Z,1492149366.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:06.397Z,1492149366.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:06.425Z,1492149366.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:06.793Z,1492149366.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:06.826Z,1492149366.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:07.193Z,1492149367.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:07.225Z,1492149367.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:07.593Z,1492149367.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:07.626Z,1492149367.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:07.993Z,1492149367.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:08.026Z,1492149368.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:08.393Z,1492149368.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:08.430Z,1492149368.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:08.797Z,1492149368.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:08.886Z,1492149368.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:09.201Z,1492149369.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:09.228Z,1492149369.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:09.593Z,1492149369.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:09.630Z,1492149369.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:09.993Z,1492149369.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:10.049Z,1492149370.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:10.401Z,1492149370.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:10.436Z,1492149370.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:10.793Z,1492149370.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:10.840Z,1492149370.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:10.846Z,1492149370.846 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:10.847Z,1492149370.847 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T05:56:10.847Z,1492149370.847 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:56:10.860Z,1492149370.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:56:11.205Z,1492149371.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:11.262Z,1492149371.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:11.301Z,1492149371.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:56:11.301Z,1492149371.301 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T05:56:11.605Z,1492149371.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:11.625Z,1492149371.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:11.651Z,1492149371.651 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:56:11.652Z,1492149371.652 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:56:11.652Z,1492149371.652 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:56:11.998Z,1492149371.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:12.018Z,1492149372.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:12.402Z,1492149372.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:12.418Z,1492149372.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:12.797Z,1492149372.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:12.865Z,1492149372.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:13.193Z,1492149373.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:13.240Z,1492149373.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:13.593Z,1492149373.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:13.630Z,1492149373.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:14.005Z,1492149374.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:14.032Z,1492149374.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:14.393Z,1492149374.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:14.430Z,1492149374.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:14.793Z,1492149374.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:14.821Z,1492149374.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:15.195Z,1492149375.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:15.243Z,1492149375.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:15.598Z,1492149375.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:15.627Z,1492149375.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:16.011Z,1492149376.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:16.052Z,1492149376.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:16.408Z,1492149376.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:16.456Z,1492149376.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:16.806Z,1492149376.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:16.898Z,1492149376.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:17.208Z,1492149377.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:17.228Z,1492149377.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:17.594Z,1492149377.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:17.636Z,1492149377.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:18.002Z,1492149378.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:18.043Z,1492149378.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:18.403Z,1492149378.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:18.435Z,1492149378.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:18.804Z,1492149378.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:18.820Z,1492149378.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:19.202Z,1492149379.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:19.218Z,1492149379.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:19.601Z,1492149379.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:19.626Z,1492149379.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:20.003Z,1492149380.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:20.024Z,1492149380.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:20.396Z,1492149380.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:20.430Z,1492149380.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:20.804Z,1492149380.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:20.828Z,1492149380.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:21.193Z,1492149381.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:21.230Z,1492149381.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:21.230Z,1492149381.230 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T05:56:21.230Z,1492149381.230 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:56:21.237Z,1492149381.237 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:21.237Z,1492149381.237 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T05:56:21.237Z,1492149381.237 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:56:21.264Z,1492149381.264 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:56:21.264Z,1492149381.264 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:56:21.593Z,1492149381.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:21.648Z,1492149381.648 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:56:21.648Z,1492149381.648 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T05:56:21.649Z,1492149381.649 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:56:21.649Z,1492149381.649 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T05:56:21.993Z,1492149381.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:22.028Z,1492149382.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:56:22.029Z,1492149382.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:56:22.029Z,1492149382.029 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:56:22.043Z,1492149382.043 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:56:22.044Z,1492149382.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:56:22.044Z,1492149382.044 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:56:22.401Z,1492149382.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:22.443Z,1492149382.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:22.802Z,1492149382.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:22.817Z,1492149382.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:23.201Z,1492149383.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:23.280Z,1492149383.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:23.604Z,1492149383.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:23.735Z,1492149383.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:24.020Z,1492149384.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:24.036Z,1492149384.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:24.401Z,1492149384.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:24.417Z,1492149384.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:24.799Z,1492149384.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:24.858Z,1492149384.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:25.202Z,1492149385.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:25.222Z,1492149385.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:25.593Z,1492149385.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:25.732Z,1492149385.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:26.005Z,1492149386.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:26.077Z,1492149386.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:26.393Z,1492149386.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:26.435Z,1492149386.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:26.790Z,1492149386.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:26.806Z,1492149386.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:27.193Z,1492149387.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:27.213Z,1492149387.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:27.599Z,1492149387.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:27.615Z,1492149387.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:27.997Z,1492149387.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:28.013Z,1492149388.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:28.393Z,1492149388.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:28.414Z,1492149388.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:28.800Z,1492149388.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:28.815Z,1492149388.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:29.201Z,1492149389.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:29.217Z,1492149389.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:29.610Z,1492149389.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:29.666Z,1492149389.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:29.993Z,1492149389.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:30.020Z,1492149390.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:30.393Z,1492149390.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:30.431Z,1492149390.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:30.793Z,1492149390.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:30.826Z,1492149390.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:31.195Z,1492149391.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:31.226Z,1492149391.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:31.593Z,1492149391.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:31.620Z,1492149391.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:31.993Z,1492149391.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:32.029Z,1492149392.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:32.397Z,1492149392.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:32.423Z,1492149392.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:32.790Z,1492149392.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:32.818Z,1492149392.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:33.193Z,1492149393.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:33.229Z,1492149393.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:33.593Z,1492149393.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:33.629Z,1492149393.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:33.993Z,1492149393.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:34.026Z,1492149394.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:34.393Z,1492149394.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:34.426Z,1492149394.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:34.793Z,1492149394.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:34.826Z,1492149394.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:38.617Z,1492149398.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:38.721Z,1492149398.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:38.830Z,1492149398.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:38.856Z,1492149398.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:39.199Z,1492149399.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:39.234Z,1492149399.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:39.621Z,1492149399.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:39.724Z,1492149399.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:40.003Z,1492149400.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:40.068Z,1492149400.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:40.399Z,1492149400.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:40.447Z,1492149400.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:40.806Z,1492149400.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:40.862Z,1492149400.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:41.204Z,1492149401.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:41.219Z,1492149401.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:41.605Z,1492149401.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:41.626Z,1492149401.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:42.005Z,1492149402.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:42.026Z,1492149402.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:42.409Z,1492149402.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:42.424Z,1492149402.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:42.805Z,1492149402.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:42.820Z,1492149402.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:43.213Z,1492149403.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:43.229Z,1492149403.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:43.597Z,1492149403.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:43.633Z,1492149403.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:44.001Z,1492149404.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:44.033Z,1492149404.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:44.401Z,1492149404.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:44.434Z,1492149404.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:44.797Z,1492149404.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:44.833Z,1492149404.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:45.194Z,1492149405.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:45.209Z,1492149405.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:45.602Z,1492149405.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:45.640Z,1492149405.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:46.002Z,1492149406.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:46.026Z,1492149406.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:46.402Z,1492149406.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:46.417Z,1492149406.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:46.809Z,1492149406.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:46.825Z,1492149406.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:47.197Z,1492149407.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:47.233Z,1492149407.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:47.597Z,1492149407.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:47.642Z,1492149407.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:48.001Z,1492149408.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:48.038Z,1492149408.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:48.397Z,1492149408.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:48.434Z,1492149408.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:48.805Z,1492149408.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:48.820Z,1492149408.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:49.207Z,1492149409.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:49.222Z,1492149409.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:49.605Z,1492149409.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:49.626Z,1492149409.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:50.005Z,1492149410.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:50.025Z,1492149410.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:50.400Z,1492149410.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:50.424Z,1492149410.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:50.812Z,1492149410.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:50.836Z,1492149410.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:51.208Z,1492149411.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:51.223Z,1492149411.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:51.613Z,1492149411.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:51.718Z,1492149411.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:52.031Z,1492149412.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:52.052Z,1492149412.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:52.400Z,1492149412.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:52.480Z,1492149412.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:52.805Z,1492149412.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:52.934Z,1492149412.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:53.229Z,1492149413.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:53.292Z,1492149413.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:53.634Z,1492149413.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:53.727Z,1492149413.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:54.014Z,1492149414.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:54.033Z,1492149414.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:54.409Z,1492149414.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:54.478Z,1492149414.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:54.808Z,1492149414.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:54.863Z,1492149414.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:55.204Z,1492149415.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:55.245Z,1492149415.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:55.610Z,1492149415.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:55.633Z,1492149415.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:55.998Z,1492149415.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:56.026Z,1492149416.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:56.426Z,1492149416.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:56.442Z,1492149416.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:56.824Z,1492149416.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:56.840Z,1492149416.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:57.207Z,1492149417.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:57.236Z,1492149417.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:57.608Z,1492149417.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:57.646Z,1492149417.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:58.019Z,1492149418.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:58.045Z,1492149418.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:58.406Z,1492149418.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:58.447Z,1492149418.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:58.815Z,1492149418.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:58.831Z,1492149418.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:59.221Z,1492149419.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:59.236Z,1492149419.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:59.599Z,1492149419.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:56:59.655Z,1492149419.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:56:59.997Z,1492149419.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:00.014Z,1492149420.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:00.401Z,1492149420.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:00.418Z,1492149420.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:00.808Z,1492149420.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:00.825Z,1492149420.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:01.205Z,1492149421.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:01.221Z,1492149421.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:01.618Z,1492149421.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:01.634Z,1492149421.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:02.001Z,1492149422.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:02.035Z,1492149422.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:02.397Z,1492149422.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:02.424Z,1492149422.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:02.797Z,1492149422.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:02.834Z,1492149422.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:03.197Z,1492149423.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:03.236Z,1492149423.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:03.626Z,1492149423.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:03.642Z,1492149423.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:04.006Z,1492149424.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:04.049Z,1492149424.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:04.401Z,1492149424.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:04.417Z,1492149424.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:04.806Z,1492149424.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:04.822Z,1492149424.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:05.213Z,1492149425.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:05.228Z,1492149425.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:05.650Z,1492149425.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:05.716Z,1492149425.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:06.005Z,1492149426.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:06.021Z,1492149426.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:06.416Z,1492149426.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:06.432Z,1492149426.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:06.813Z,1492149426.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:06.861Z,1492149426.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:07.197Z,1492149427.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:07.265Z,1492149427.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:07.606Z,1492149427.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:07.698Z,1492149427.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:08.004Z,1492149428.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:08.045Z,1492149428.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:08.401Z,1492149428.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:08.470Z,1492149428.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:08.797Z,1492149428.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:08.818Z,1492149428.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:09.202Z,1492149429.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:09.314Z,1492149429.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:09.620Z,1492149429.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:09.674Z,1492149429.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:10.013Z,1492149430.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:10.034Z,1492149430.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:10.413Z,1492149430.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:10.428Z,1492149430.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:10.811Z,1492149430.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:10.827Z,1492149430.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:11.217Z,1492149431.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:11.304Z,1492149431.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:11.606Z,1492149431.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:11.621Z,1492149431.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:12.014Z,1492149432.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:12.030Z,1492149432.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:12.410Z,1492149432.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:12.425Z,1492149432.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:12.805Z,1492149432.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:12.820Z,1492149432.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:13.208Z,1492149433.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:13.224Z,1492149433.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:13.617Z,1492149433.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:13.633Z,1492149433.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:13.997Z,1492149433.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:14.031Z,1492149434.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:14.394Z,1492149434.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:14.422Z,1492149434.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:14.801Z,1492149434.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:14.834Z,1492149434.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:15.194Z,1492149435.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:15.222Z,1492149435.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:15.597Z,1492149435.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:15.613Z,1492149435.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:16.008Z,1492149436.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:16.057Z,1492149436.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:16.406Z,1492149436.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:16.422Z,1492149436.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:16.808Z,1492149436.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:16.836Z,1492149436.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:17.213Z,1492149437.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:17.250Z,1492149437.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:17.624Z,1492149437.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:17.662Z,1492149437.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:18.038Z,1492149438.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:18.075Z,1492149438.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:18.427Z,1492149438.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:18.485Z,1492149438.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:18.802Z,1492149438.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:18.829Z,1492149438.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:19.197Z,1492149439.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:19.224Z,1492149439.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:19.659Z,1492149439.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:19.700Z,1492149439.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:20.005Z,1492149440.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:20.036Z,1492149440.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:20.398Z,1492149440.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:20.425Z,1492149440.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:20.805Z,1492149440.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:20.832Z,1492149440.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:21.197Z,1492149441.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:21.234Z,1492149441.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:21.662Z,1492149441.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:21.766Z,1492149441.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:21.997Z,1492149441.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:22.030Z,1492149442.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:22.397Z,1492149442.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:22.446Z,1492149442.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:22.808Z,1492149442.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:22.824Z,1492149442.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:23.205Z,1492149443.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:23.314Z,1492149443.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:23.608Z,1492149443.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:23.702Z,1492149443.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:24.014Z,1492149444.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:24.064Z,1492149444.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:24.421Z,1492149444.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:24.444Z,1492149444.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:24.800Z,1492149444.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:24.877Z,1492149444.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:25.197Z,1492149445.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:25.296Z,1492149445.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:25.619Z,1492149445.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:25.637Z,1492149445.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:26.029Z,1492149446.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:26.090Z,1492149446.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:26.408Z,1492149446.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:26.486Z,1492149446.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:26.806Z,1492149446.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:26.876Z,1492149446.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:27.205Z,1492149447.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:27.283Z,1492149447.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:27.607Z,1492149447.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:27.631Z,1492149447.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:28.048Z,1492149448.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:28.141Z,1492149448.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:28.426Z,1492149448.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:28.475Z,1492149448.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:28.826Z,1492149448.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:28.887Z,1492149448.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:29.314Z,1492149449.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:29.423Z,1492149449.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:29.688Z,1492149449.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:29.749Z,1492149449.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:30.245Z,1492149450.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:30.408Z,1492149450.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:30.669Z,1492149450.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:30.778Z,1492149450.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:31.032Z,1492149451.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:31.089Z,1492149451.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:31.407Z,1492149451.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:31.508Z,1492149451.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:31.784Z,1492149451.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:31.864Z,1492149451.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:32.179Z,1492149452.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:32.215Z,1492149452.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:32.583Z,1492149452.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:32.652Z,1492149452.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:32.977Z,1492149452.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:33.014Z,1492149453.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:33.377Z,1492149453.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:33.450Z,1492149453.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:33.830Z,1492149453.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:33.868Z,1492149453.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:34.177Z,1492149454.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:34.211Z,1492149454.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:34.606Z,1492149454.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:34.696Z,1492149454.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:35.019Z,1492149455.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:35.069Z,1492149455.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:40.680Z,1492149460.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:40.707Z,1492149460.707 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:57:40.707Z,1492149460.707 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:57:40.707Z,1492149460.707 [BPC1](ERROR): Communications Fault
2017-04-14T05:57:40.719Z,1492149460.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:40.799Z,1492149460.799 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:57:40.886Z,1492149460.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:40.916Z,1492149460.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:41.319Z,1492149461.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:41.416Z,1492149461.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:41.649Z,1492149461.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:41.725Z,1492149461.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:41.801Z,1492149461.801 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:57:41.802Z,1492149461.802 [BPC1] No Fault, FailCount= 1
2017-04-14T05:57:42.036Z,1492149462.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:42.158Z,1492149462.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:42.435Z,1492149462.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:42.504Z,1492149462.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:42.836Z,1492149462.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:42.873Z,1492149462.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:43.313Z,1492149463.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:43.377Z,1492149463.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:43.638Z,1492149463.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:43.683Z,1492149463.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:44.041Z,1492149464.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:44.068Z,1492149464.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:44.438Z,1492149464.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:44.471Z,1492149464.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:44.835Z,1492149464.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:44.851Z,1492149464.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:45.262Z,1492149465.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:45.343Z,1492149465.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:45.651Z,1492149465.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:45.667Z,1492149465.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:46.051Z,1492149466.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:46.069Z,1492149466.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:46.442Z,1492149466.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:46.458Z,1492149466.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:46.855Z,1492149466.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:46.884Z,1492149466.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:47.257Z,1492149467.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:47.283Z,1492149467.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:47.640Z,1492149467.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:47.725Z,1492149467.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:48.048Z,1492149468.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:48.102Z,1492149468.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:48.440Z,1492149468.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:48.457Z,1492149468.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:48.845Z,1492149468.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:48.862Z,1492149468.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:49.275Z,1492149469.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:49.357Z,1492149469.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:49.645Z,1492149469.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:49.711Z,1492149469.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:50.095Z,1492149470.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:50.125Z,1492149470.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:50.445Z,1492149470.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:50.481Z,1492149470.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:50.845Z,1492149470.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:50.864Z,1492149470.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:51.347Z,1492149471.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:51.372Z,1492149471.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:51.656Z,1492149471.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:51.741Z,1492149471.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:52.049Z,1492149472.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:52.066Z,1492149472.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:52.433Z,1492149472.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:52.459Z,1492149472.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:52.834Z,1492149472.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:52.866Z,1492149472.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:53.300Z,1492149473.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:53.332Z,1492149473.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:53.637Z,1492149473.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:53.678Z,1492149473.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:54.048Z,1492149474.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:54.081Z,1492149474.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:54.451Z,1492149474.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:54.526Z,1492149474.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:54.865Z,1492149474.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:54.964Z,1492149474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:55.282Z,1492149475.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:55.368Z,1492149475.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:55.635Z,1492149475.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:55.683Z,1492149475.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:56.035Z,1492149476.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:56.091Z,1492149476.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:56.437Z,1492149476.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:56.470Z,1492149476.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:56.833Z,1492149476.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:56.882Z,1492149476.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:57.278Z,1492149477.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:57.342Z,1492149477.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:57.645Z,1492149477.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:57.682Z,1492149477.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:58.033Z,1492149478.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:58.093Z,1492149478.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:58.438Z,1492149478.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:58.473Z,1492149478.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:58.843Z,1492149478.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:58.859Z,1492149478.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:59.306Z,1492149479.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:59.351Z,1492149479.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:57:59.641Z,1492149479.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:57:59.686Z,1492149479.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:00.034Z,1492149480.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:00.057Z,1492149480.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:00.440Z,1492149480.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:00.469Z,1492149480.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:00.835Z,1492149480.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:00.850Z,1492149480.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:01.234Z,1492149481.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:01.252Z,1492149481.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:01.662Z,1492149481.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:01.710Z,1492149481.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:02.039Z,1492149482.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:02.055Z,1492149482.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:02.440Z,1492149482.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:02.456Z,1492149482.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:02.841Z,1492149482.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:02.881Z,1492149482.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:03.241Z,1492149483.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:03.262Z,1492149483.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:03.641Z,1492149483.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:03.657Z,1492149483.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:04.049Z,1492149484.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:04.075Z,1492149484.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:04.437Z,1492149484.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:04.464Z,1492149484.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:04.833Z,1492149484.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:04.863Z,1492149484.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:05.265Z,1492149485.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:05.314Z,1492149485.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:05.640Z,1492149485.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:05.670Z,1492149485.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:06.033Z,1492149486.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:06.066Z,1492149486.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:06.433Z,1492149486.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:06.473Z,1492149486.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:06.842Z,1492149486.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:06.876Z,1492149486.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:07.270Z,1492149487.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:07.294Z,1492149487.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:07.660Z,1492149487.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:07.710Z,1492149487.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:08.040Z,1492149488.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:08.093Z,1492149488.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:08.439Z,1492149488.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:08.477Z,1492149488.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:08.845Z,1492149488.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:08.896Z,1492149488.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:09.245Z,1492149489.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:09.351Z,1492149489.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:09.646Z,1492149489.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:09.670Z,1492149489.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:10.043Z,1492149490.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:10.114Z,1492149490.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:10.443Z,1492149490.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:10.466Z,1492149490.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:10.846Z,1492149490.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:10.909Z,1492149490.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:11.255Z,1492149491.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:11.297Z,1492149491.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:11.647Z,1492149491.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:11.706Z,1492149491.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:12.042Z,1492149492.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:12.065Z,1492149492.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:12.442Z,1492149492.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:12.462Z,1492149492.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:12.848Z,1492149492.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:12.885Z,1492149492.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:13.304Z,1492149493.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:13.325Z,1492149493.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:13.638Z,1492149493.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:13.678Z,1492149493.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:14.033Z,1492149494.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:14.071Z,1492149494.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:14.434Z,1492149494.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:14.489Z,1492149494.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:14.834Z,1492149494.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:14.849Z,1492149494.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:15.234Z,1492149495.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:15.257Z,1492149495.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:15.642Z,1492149495.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:15.659Z,1492149495.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:16.040Z,1492149496.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:16.057Z,1492149496.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:16.438Z,1492149496.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:16.461Z,1492149496.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:16.849Z,1492149496.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:16.868Z,1492149496.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:17.241Z,1492149497.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:17.267Z,1492149497.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:17.640Z,1492149497.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:17.671Z,1492149497.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:18.033Z,1492149498.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:18.068Z,1492149498.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:18.452Z,1492149498.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:18.468Z,1492149498.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:18.833Z,1492149498.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:18.883Z,1492149498.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:19.235Z,1492149499.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:19.310Z,1492149499.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:19.633Z,1492149499.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:19.671Z,1492149499.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:20.034Z,1492149500.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:20.067Z,1492149500.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:20.441Z,1492149500.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:20.486Z,1492149500.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:20.837Z,1492149500.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:20.873Z,1492149500.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:21.235Z,1492149501.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:21.280Z,1492149501.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:21.641Z,1492149501.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:21.674Z,1492149501.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:22.036Z,1492149502.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:22.076Z,1492149502.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:22.437Z,1492149502.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:22.476Z,1492149502.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:22.841Z,1492149502.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:22.880Z,1492149502.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:23.248Z,1492149503.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:23.280Z,1492149503.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:23.645Z,1492149503.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:23.730Z,1492149503.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:24.042Z,1492149504.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:24.103Z,1492149504.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:24.442Z,1492149504.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:24.461Z,1492149504.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:24.840Z,1492149504.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:24.879Z,1492149504.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:25.241Z,1492149505.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:25.294Z,1492149505.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:25.652Z,1492149505.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:25.663Z,1492149505.662 [PNI_TCM](ERROR): CRC does not match. Expected:0x55950 got:0x3415
2017-04-14T05:58:25.714Z,1492149505.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:26.052Z,1492149506.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:26.100Z,1492149506.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:26.451Z,1492149506.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:26.467Z,1492149506.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:26.833Z,1492149506.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:26.878Z,1492149506.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:27.279Z,1492149507.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:27.316Z,1492149507.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:27.652Z,1492149507.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:27.668Z,1492149507.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:28.045Z,1492149508.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:28.064Z,1492149508.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:28.430Z,1492149508.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:28.469Z,1492149508.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:28.850Z,1492149508.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:28.868Z,1492149508.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:29.247Z,1492149509.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:29.274Z,1492149509.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:29.644Z,1492149509.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:29.665Z,1492149509.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:30.034Z,1492149510.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:30.078Z,1492149510.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:30.433Z,1492149510.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:30.496Z,1492149510.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:30.838Z,1492149510.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:30.877Z,1492149510.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:31.241Z,1492149511.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:31.268Z,1492149511.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:31.633Z,1492149511.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:31.670Z,1492149511.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:32.030Z,1492149512.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:32.064Z,1492149512.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:32.445Z,1492149512.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:32.480Z,1492149512.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:32.845Z,1492149512.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:32.872Z,1492149512.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:33.241Z,1492149513.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:33.281Z,1492149513.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:33.640Z,1492149513.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:33.650Z,1492149513.650 [PNI_TCM](ERROR): CRC does not match. Expected:0x40927 got:0x7361
2017-04-14T05:58:33.693Z,1492149513.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:34.047Z,1492149514.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:34.063Z,1492149514.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:34.447Z,1492149514.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:34.462Z,1492149514.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:34.849Z,1492149514.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:34.868Z,1492149514.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:34.889Z,1492149514.889 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T05:58:34.889Z,1492149514.889 [Default:CheckIn:C.Wait] Stopped
2017-04-14T05:58:34.889Z,1492149514.889 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T05:58:34.889Z,1492149514.889 [Default:CheckIn:D] Running Loop=1
2017-04-14T05:58:35.248Z,1492149515.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:35.288Z,1492149515.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:35.301Z,1492149515.301 [Default:CheckIn:D] Stopped
2017-04-14T05:58:35.301Z,1492149515.302 [Default:CheckIn:E] Running Loop=1
2017-04-14T05:58:38.672Z,1492149518.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:38.777Z,1492149518.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:38.786Z,1492149518.786 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 152.499707 min 
2017-04-14T05:58:38.786Z,1492149518.786 [Default:CheckIn:E] Stopped
2017-04-14T05:58:38.786Z,1492149518.786 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T05:58:38.786Z,1492149518.786 [Default:CheckIn] Stopped
2017-04-14T05:58:38.787Z,1492149518.787 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T05:58:38.787Z,1492149518.787 [Default:CheckIn](INFO): Running loop #23
2017-04-14T05:58:38.787Z,1492149518.787 [Default:CheckIn] Running Loop=23
2017-04-14T05:58:38.787Z,1492149518.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T05:58:38.787Z,1492149518.787 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T05:58:38.882Z,1492149518.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:38.911Z,1492149518.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:39.228Z,1492149519.228 [NAL9602](INFO): Powering up
2017-04-14T05:58:39.245Z,1492149519.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:39.302Z,1492149519.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:39.651Z,1492149519.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:39.667Z,1492149519.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:40.052Z,1492149520.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:40.102Z,1492149520.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:40.449Z,1492149520.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:40.492Z,1492149520.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:40.850Z,1492149520.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:40.866Z,1492149520.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:41.261Z,1492149521.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:41.302Z,1492149521.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:41.652Z,1492149521.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:41.674Z,1492149521.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:42.055Z,1492149522.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:42.071Z,1492149522.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:42.444Z,1492149522.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:42.476Z,1492149522.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:42.860Z,1492149522.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:42.890Z,1492149522.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:43.255Z,1492149523.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:43.278Z,1492149523.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:43.654Z,1492149523.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:43.674Z,1492149523.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:44.053Z,1492149524.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:44.068Z,1492149524.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:44.459Z,1492149524.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:44.475Z,1492149524.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:44.858Z,1492149524.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:44.874Z,1492149524.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:45.261Z,1492149525.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:45.276Z,1492149525.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:45.641Z,1492149525.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:45.668Z,1492149525.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:46.054Z,1492149526.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:46.071Z,1492149526.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:46.454Z,1492149526.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:46.513Z,1492149526.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:46.841Z,1492149526.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:46.869Z,1492149526.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:47.242Z,1492149527.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:47.271Z,1492149527.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:47.673Z,1492149527.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:47.705Z,1492149527.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:48.049Z,1492149528.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:48.077Z,1492149528.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:48.443Z,1492149528.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:48.493Z,1492149528.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:48.843Z,1492149528.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:48.901Z,1492149528.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:49.265Z,1492149529.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:49.290Z,1492149529.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:49.683Z,1492149529.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:49.727Z,1492149529.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:50.041Z,1492149530.040 [NAL9602](INFO): NAL9602 initialized
2017-04-14T05:58:50.060Z,1492149530.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:50.109Z,1492149530.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:50.455Z,1492149530.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:50.471Z,1492149530.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:50.861Z,1492149530.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:50.877Z,1492149530.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:51.265Z,1492149531.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:51.312Z,1492149531.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:51.666Z,1492149531.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:51.690Z,1492149531.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:52.041Z,1492149532.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:52.098Z,1492149532.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:52.449Z,1492149532.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:52.530Z,1492149532.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:52.844Z,1492149532.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:52.880Z,1492149532.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:53.256Z,1492149533.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:53.285Z,1492149533.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:53.642Z,1492149533.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:53.698Z,1492149533.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:54.047Z,1492149534.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:54.062Z,1492149534.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:54.450Z,1492149534.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:54.506Z,1492149534.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:54.850Z,1492149534.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:54.901Z,1492149534.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:55.262Z,1492149535.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:55.286Z,1492149535.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:55.658Z,1492149535.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:55.689Z,1492149535.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:56.053Z,1492149536.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:56.089Z,1492149536.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:56.451Z,1492149536.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:56.488Z,1492149536.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:56.853Z,1492149536.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:56.887Z,1492149536.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:57.247Z,1492149537.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:57.263Z,1492149537.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:57.650Z,1492149537.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:57.670Z,1492149537.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:58.046Z,1492149538.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:58.062Z,1492149538.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:58.456Z,1492149538.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:58.472Z,1492149538.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:58.857Z,1492149538.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:58.872Z,1492149538.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:59.255Z,1492149539.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:59.271Z,1492149539.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:58:59.650Z,1492149539.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:58:59.666Z,1492149539.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:00.122Z,1492149540.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:00.139Z,1492149540.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:00.455Z,1492149540.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:00.471Z,1492149540.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:00.841Z,1492149540.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:00.874Z,1492149540.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:01.241Z,1492149541.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:01.278Z,1492149541.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:01.653Z,1492149541.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:01.673Z,1492149541.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:02.041Z,1492149542.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:02.074Z,1492149542.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:02.441Z,1492149542.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:02.475Z,1492149542.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:02.866Z,1492149542.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:02.882Z,1492149542.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:03.261Z,1492149543.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:03.282Z,1492149543.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:03.649Z,1492149543.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:03.682Z,1492149543.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:04.041Z,1492149544.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:04.069Z,1492149544.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:04.441Z,1492149544.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:04.473Z,1492149544.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:04.845Z,1492149544.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:04.886Z,1492149544.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:05.249Z,1492149545.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:05.265Z,1492149545.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:05.646Z,1492149545.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:05.662Z,1492149545.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:06.049Z,1492149546.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:06.065Z,1492149546.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:06.451Z,1492149546.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:06.467Z,1492149546.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:06.845Z,1492149546.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:06.913Z,1492149546.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:07.250Z,1492149547.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:07.283Z,1492149547.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:07.645Z,1492149547.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:07.696Z,1492149547.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:08.045Z,1492149548.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:08.098Z,1492149548.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:08.445Z,1492149548.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:08.478Z,1492149548.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:08.845Z,1492149548.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:08.898Z,1492149548.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:09.241Z,1492149549.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:09.298Z,1492149549.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:09.641Z,1492149549.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:09.683Z,1492149549.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:10.045Z,1492149550.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:10.083Z,1492149550.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:10.449Z,1492149550.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:10.482Z,1492149550.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:10.841Z,1492149550.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:10.857Z,1492149550.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:11.259Z,1492149551.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:11.294Z,1492149551.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:11.652Z,1492149551.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:11.684Z,1492149551.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:11.695Z,1492149551.695 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:11.695Z,1492149551.695 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T05:59:11.699Z,1492149551.699 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T05:59:11.733Z,1492149551.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T05:59:12.049Z,1492149552.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:12.064Z,1492149552.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:12.115Z,1492149552.115 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T05:59:12.115Z,1492149552.115 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T05:59:12.450Z,1492149552.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:12.466Z,1492149552.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:12.488Z,1492149552.488 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T05:59:12.488Z,1492149552.488 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:59:12.489Z,1492149552.489 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:59:12.661Z,1492149552.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:12.846Z,1492149552.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:12.866Z,1492149552.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:13.250Z,1492149553.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:13.265Z,1492149553.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:13.457Z,1492149553.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:13.650Z,1492149553.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:13.666Z,1492149553.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:13.864Z,1492149553.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:14.049Z,1492149554.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:14.065Z,1492149554.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:14.449Z,1492149554.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:14.464Z,1492149554.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:14.660Z,1492149554.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:14.845Z,1492149554.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:14.868Z,1492149554.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:15.249Z,1492149555.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:15.270Z,1492149555.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:15.457Z,1492149555.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:15.659Z,1492149555.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:15.674Z,1492149555.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:15.860Z,1492149555.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:16.064Z,1492149556.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:16.080Z,1492149556.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:16.441Z,1492149556.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:16.468Z,1492149556.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:16.862Z,1492149556.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:16.878Z,1492149556.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:17.242Z,1492149557.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:17.270Z,1492149557.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:17.641Z,1492149557.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:17.673Z,1492149557.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:18.054Z,1492149558.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:18.084Z,1492149558.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:18.458Z,1492149558.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:18.494Z,1492149558.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:18.856Z,1492149558.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:18.905Z,1492149558.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:19.255Z,1492149559.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:19.300Z,1492149559.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:19.652Z,1492149559.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:19.696Z,1492149559.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:20.068Z,1492149560.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:20.099Z,1492149560.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:20.455Z,1492149560.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:20.470Z,1492149560.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:20.854Z,1492149560.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:20.870Z,1492149560.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:21.250Z,1492149561.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:21.310Z,1492149561.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:21.649Z,1492149561.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:21.683Z,1492149561.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:22.041Z,1492149562.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:22.069Z,1492149562.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:22.069Z,1492149562.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T05:59:22.069Z,1492149562.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T05:59:22.076Z,1492149562.076 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:22.077Z,1492149562.077 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T05:59:22.077Z,1492149562.077 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T05:59:22.091Z,1492149562.091 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T05:59:22.092Z,1492149562.092 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T05:59:22.462Z,1492149562.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:22.495Z,1492149562.495 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T05:59:22.495Z,1492149562.495 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T05:59:22.496Z,1492149562.496 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T05:59:22.496Z,1492149562.496 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T05:59:22.845Z,1492149562.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:22.910Z,1492149562.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T05:59:22.911Z,1492149562.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:59:22.911Z,1492149562.911 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:59:22.916Z,1492149562.916 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T05:59:22.916Z,1492149562.916 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T05:59:22.916Z,1492149562.917 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T05:59:23.250Z,1492149563.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:23.282Z,1492149563.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:23.655Z,1492149563.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:23.713Z,1492149563.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:24.059Z,1492149564.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:24.110Z,1492149564.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:24.461Z,1492149564.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:24.477Z,1492149564.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:24.848Z,1492149564.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:24.880Z,1492149564.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:25.253Z,1492149565.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:25.274Z,1492149565.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:25.662Z,1492149565.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:25.678Z,1492149565.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:26.041Z,1492149566.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:26.074Z,1492149566.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:26.445Z,1492149566.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:26.473Z,1492149566.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:26.842Z,1492149566.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:26.874Z,1492149566.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:27.244Z,1492149567.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:27.279Z,1492149567.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:27.649Z,1492149567.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:27.678Z,1492149567.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:28.047Z,1492149568.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:28.076Z,1492149568.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:28.463Z,1492149568.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:28.479Z,1492149568.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:28.845Z,1492149568.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:28.913Z,1492149568.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:29.242Z,1492149569.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:29.298Z,1492149569.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:29.646Z,1492149569.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:29.686Z,1492149569.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:30.074Z,1492149570.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:30.090Z,1492149570.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:30.457Z,1492149570.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:30.485Z,1492149570.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:30.847Z,1492149570.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:30.863Z,1492149570.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:31.249Z,1492149571.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:31.265Z,1492149571.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:31.646Z,1492149571.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:31.663Z,1492149571.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:32.055Z,1492149572.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:32.071Z,1492149572.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:32.451Z,1492149572.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:32.467Z,1492149572.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:32.861Z,1492149572.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:32.877Z,1492149572.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:33.258Z,1492149573.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:33.297Z,1492149573.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:33.653Z,1492149573.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:33.668Z,1492149573.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:34.052Z,1492149574.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:34.068Z,1492149574.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:34.462Z,1492149574.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:34.483Z,1492149574.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:34.841Z,1492149574.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:34.894Z,1492149574.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:35.241Z,1492149575.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:35.271Z,1492149575.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:39.024Z,1492149579.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:39.040Z,1492149579.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:39.172Z,1492149579.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:39.181Z,1492149579.181 [BPC1](ERROR): Failed to receive battery data
2017-04-14T05:59:39.181Z,1492149579.181 [BPC1] Communications Fault, FailCount= 1
2017-04-14T05:59:39.181Z,1492149579.181 [BPC1](ERROR): Communications Fault
2017-04-14T05:59:39.190Z,1492149579.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:39.234Z,1492149579.234 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T05:59:39.582Z,1492149579.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:39.629Z,1492149579.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:39.945Z,1492149579.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:39.977Z,1492149579.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:40.339Z,1492149580.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:40.377Z,1492149580.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:40.396Z,1492149580.396 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T05:59:40.396Z,1492149580.397 [BPC1] No Fault, FailCount= 1
2017-04-14T05:59:40.747Z,1492149580.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:40.822Z,1492149580.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:41.146Z,1492149581.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:41.194Z,1492149581.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:41.546Z,1492149581.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:41.582Z,1492149581.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:41.937Z,1492149581.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:41.981Z,1492149581.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:42.342Z,1492149582.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:42.358Z,1492149582.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:42.749Z,1492149582.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:42.777Z,1492149582.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:43.147Z,1492149583.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:43.165Z,1492149583.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:43.551Z,1492149583.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:43.567Z,1492149583.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:43.946Z,1492149583.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:43.970Z,1492149583.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:44.341Z,1492149584.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:44.357Z,1492149584.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:44.739Z,1492149584.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:44.758Z,1492149584.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:45.144Z,1492149585.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:45.160Z,1492149585.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:45.548Z,1492149585.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:45.563Z,1492149585.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:45.931Z,1492149585.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:45.958Z,1492149585.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:46.348Z,1492149586.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:46.364Z,1492149586.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:46.727Z,1492149586.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:46.769Z,1492149586.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:47.155Z,1492149587.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:47.171Z,1492149587.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:47.552Z,1492149587.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:47.568Z,1492149587.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:47.947Z,1492149587.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:47.962Z,1492149587.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:48.328Z,1492149588.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:48.365Z,1492149588.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:48.737Z,1492149588.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:48.765Z,1492149588.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:49.133Z,1492149589.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:49.161Z,1492149589.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:49.549Z,1492149589.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:49.565Z,1492149589.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:49.929Z,1492149589.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:49.963Z,1492149589.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:50.337Z,1492149590.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:50.374Z,1492149590.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:50.763Z,1492149590.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:50.790Z,1492149590.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:51.167Z,1492149591.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:51.194Z,1492149591.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:51.551Z,1492149591.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:51.583Z,1492149591.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:51.939Z,1492149591.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:51.998Z,1492149591.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:52.342Z,1492149592.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:52.363Z,1492149592.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:52.749Z,1492149592.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:52.766Z,1492149592.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:53.140Z,1492149593.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:53.185Z,1492149593.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:53.536Z,1492149593.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:53.558Z,1492149593.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:53.948Z,1492149593.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:53.998Z,1492149593.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:54.323Z,1492149594.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:54.390Z,1492149594.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:54.767Z,1492149594.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:54.804Z,1492149594.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:55.144Z,1492149595.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:55.159Z,1492149595.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:55.545Z,1492149595.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:55.567Z,1492149595.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:55.947Z,1492149595.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:55.963Z,1492149595.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:56.363Z,1492149596.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:56.399Z,1492149596.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:56.749Z,1492149596.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:56.765Z,1492149596.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:57.132Z,1492149597.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:57.159Z,1492149597.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:57.550Z,1492149597.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:57.566Z,1492149597.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:57.933Z,1492149597.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:57.974Z,1492149597.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:58.345Z,1492149598.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:58.361Z,1492149598.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:58.746Z,1492149598.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:58.762Z,1492149598.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:59.127Z,1492149599.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:59.163Z,1492149599.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:59.534Z,1492149599.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:59.568Z,1492149599.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T05:59:59.935Z,1492149599.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T05:59:59.965Z,1492149599.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:00.325Z,1492149600.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:00.350Z,1492149600.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:00.728Z,1492149600.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:00.756Z,1492149600.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:01.181Z,1492149601.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:01.217Z,1492149601.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:01.536Z,1492149601.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:01.561Z,1492149601.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:01.936Z,1492149601.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:01.972Z,1492149601.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:02.337Z,1492149602.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:02.352Z,1492149602.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:02.743Z,1492149602.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:02.760Z,1492149602.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:03.140Z,1492149603.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:03.156Z,1492149603.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:03.545Z,1492149603.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:03.566Z,1492149603.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:03.938Z,1492149603.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:03.955Z,1492149603.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:04.350Z,1492149604.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:04.374Z,1492149604.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:04.746Z,1492149604.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:04.762Z,1492149604.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:05.129Z,1492149605.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:05.241Z,1492149605.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:05.527Z,1492149605.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:05.560Z,1492149605.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:05.940Z,1492149605.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:05.994Z,1492149605.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:06.332Z,1492149606.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:06.364Z,1492149606.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:06.732Z,1492149606.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:06.779Z,1492149606.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:07.133Z,1492149607.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:07.183Z,1492149607.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:07.577Z,1492149607.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:07.627Z,1492149607.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:07.926Z,1492149607.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:07.999Z,1492149607.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:08.341Z,1492149608.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:08.356Z,1492149608.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:08.737Z,1492149608.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:08.757Z,1492149608.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:09.147Z,1492149609.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:09.163Z,1492149609.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:09.537Z,1492149609.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:09.561Z,1492149609.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:09.923Z,1492149609.923 [NAL9602](INFO): SBD MO Status=2, MOMSN=2116, MT Status=2, MTMSN=0
2017-04-14T06:00:09.925Z,1492149609.925 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:00:09.967Z,1492149609.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:10.000Z,1492149610.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:10.349Z,1492149610.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:10.377Z,1492149610.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:10.772Z,1492149610.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:10.790Z,1492149610.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:11.140Z,1492149611.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:11.168Z,1492149611.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:11.566Z,1492149611.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:11.595Z,1492149611.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:11.936Z,1492149611.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:11.951Z,1492149611.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:12.342Z,1492149612.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:12.357Z,1492149612.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:12.744Z,1492149612.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:12.760Z,1492149612.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:13.170Z,1492149613.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:13.206Z,1492149613.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:13.540Z,1492149613.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:13.564Z,1492149613.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:13.941Z,1492149613.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:13.956Z,1492149613.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:14.354Z,1492149614.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:14.374Z,1492149614.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:14.749Z,1492149614.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:14.772Z,1492149614.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:15.130Z,1492149615.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:15.157Z,1492149615.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:15.545Z,1492149615.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:15.561Z,1492149615.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:15.944Z,1492149615.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:15.966Z,1492149615.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:16.327Z,1492149616.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:16.355Z,1492149616.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:16.745Z,1492149616.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:16.766Z,1492149616.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:17.127Z,1492149617.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:17.158Z,1492149617.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:17.550Z,1492149617.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:17.613Z,1492149617.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:17.928Z,1492149617.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:17.983Z,1492149617.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:18.326Z,1492149618.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:18.362Z,1492149618.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:18.727Z,1492149618.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:18.768Z,1492149618.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:19.155Z,1492149619.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:19.208Z,1492149619.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:19.536Z,1492149619.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:19.570Z,1492149619.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:19.927Z,1492149619.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:19.986Z,1492149619.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:20.336Z,1492149620.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:20.364Z,1492149620.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:20.735Z,1492149620.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:20.794Z,1492149620.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:21.132Z,1492149621.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:21.168Z,1492149621.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:21.545Z,1492149621.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:21.571Z,1492149621.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:21.928Z,1492149621.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:21.966Z,1492149621.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:22.327Z,1492149622.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:22.344Z,1492149622.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:22.736Z,1492149622.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:22.779Z,1492149622.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:23.129Z,1492149623.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:23.145Z,1492149623.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:23.537Z,1492149623.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:23.558Z,1492149623.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:23.944Z,1492149623.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:23.975Z,1492149623.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:24.348Z,1492149624.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:24.396Z,1492149624.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:24.741Z,1492149624.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:24.765Z,1492149624.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:25.152Z,1492149625.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:25.168Z,1492149625.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:25.535Z,1492149625.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:25.570Z,1492149625.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:25.936Z,1492149625.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:25.964Z,1492149625.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:26.328Z,1492149626.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:26.365Z,1492149626.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:26.732Z,1492149626.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:26.767Z,1492149626.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:27.136Z,1492149627.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:27.166Z,1492149627.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:27.536Z,1492149627.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:27.573Z,1492149627.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:27.972Z,1492149627.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:28.006Z,1492149628.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:28.334Z,1492149628.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:28.370Z,1492149628.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:28.744Z,1492149628.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:28.776Z,1492149628.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:29.146Z,1492149629.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:29.181Z,1492149629.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:29.572Z,1492149629.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:29.600Z,1492149629.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:29.945Z,1492149629.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:29.980Z,1492149629.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:30.334Z,1492149630.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:30.359Z,1492149630.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:30.744Z,1492149630.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:30.760Z,1492149630.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:31.135Z,1492149631.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:31.176Z,1492149631.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:31.542Z,1492149631.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:31.625Z,1492149631.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:31.914Z,1492149631.914 [NAL9602](INFO): SBD MO Status=2, MOMSN=2116, MT Status=2, MTMSN=0
2017-04-14T06:00:31.914Z,1492149631.914 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:00:31.952Z,1492149631.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:31.968Z,1492149631.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:32.353Z,1492149632.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:32.406Z,1492149632.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:32.727Z,1492149632.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:32.754Z,1492149632.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:33.127Z,1492149633.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:33.196Z,1492149633.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:33.543Z,1492149633.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:33.601Z,1492149633.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:33.927Z,1492149633.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:33.955Z,1492149633.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:34.327Z,1492149634.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:34.364Z,1492149634.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:34.742Z,1492149634.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:34.758Z,1492149634.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:35.149Z,1492149635.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:35.165Z,1492149635.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:35.560Z,1492149635.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:35.576Z,1492149635.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:38.960Z,1492149638.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:39.050Z,1492149639.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:39.169Z,1492149639.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:39.185Z,1492149639.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:39.529Z,1492149639.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:39.566Z,1492149639.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:39.930Z,1492149639.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:39.967Z,1492149639.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:40.314Z,1492149640.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:40.337Z,1492149640.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:40.718Z,1492149640.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:40.774Z,1492149640.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:41.111Z,1492149641.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:41.150Z,1492149641.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:41.513Z,1492149641.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:41.530Z,1492149641.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:41.901Z,1492149641.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:41.939Z,1492149641.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:42.315Z,1492149642.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:42.339Z,1492149642.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:42.705Z,1492149642.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:42.732Z,1492149642.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:43.101Z,1492149643.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:43.138Z,1492149643.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:43.521Z,1492149643.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:43.541Z,1492149643.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:43.922Z,1492149643.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:43.996Z,1492149643.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:44.311Z,1492149644.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:44.360Z,1492149644.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:44.726Z,1492149644.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:44.741Z,1492149644.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:45.116Z,1492149645.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:45.173Z,1492149645.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:45.513Z,1492149645.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:45.544Z,1492149645.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:45.913Z,1492149645.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:45.966Z,1492149645.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:46.309Z,1492149646.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:46.366Z,1492149646.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:46.713Z,1492149646.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:46.728Z,1492149646.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:47.114Z,1492149647.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:47.158Z,1492149647.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:47.514Z,1492149647.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:47.576Z,1492149647.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:48.019Z,1492149648.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:48.071Z,1492149648.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:48.312Z,1492149648.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:48.341Z,1492149648.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:48.703Z,1492149648.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:48.744Z,1492149648.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:49.120Z,1492149649.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:49.187Z,1492149649.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:49.520Z,1492149649.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:49.552Z,1492149649.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:49.932Z,1492149649.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:49.970Z,1492149649.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:50.315Z,1492149650.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:50.331Z,1492149650.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:50.540Z,1492149650.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:50.716Z,1492149650.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:50.732Z,1492149650.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:51.109Z,1492149651.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:51.130Z,1492149651.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:51.336Z,1492149651.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:51.504Z,1492149651.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:51.528Z,1492149651.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:51.740Z,1492149651.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:51.922Z,1492149651.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:51.942Z,1492149651.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:52.318Z,1492149652.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:52.338Z,1492149652.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:52.718Z,1492149652.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:52.738Z,1492149652.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:53.101Z,1492149653.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:53.128Z,1492149653.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:53.516Z,1492149653.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:53.537Z,1492149653.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:53.921Z,1492149653.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:53.950Z,1492149653.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:54.324Z,1492149654.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:54.340Z,1492149654.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:54.701Z,1492149654.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:54.738Z,1492149654.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:55.101Z,1492149655.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:55.134Z,1492149655.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:55.509Z,1492149655.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:55.543Z,1492149655.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:55.913Z,1492149655.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:55.942Z,1492149655.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:56.305Z,1492149656.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:56.342Z,1492149656.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:56.713Z,1492149656.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:56.809Z,1492149656.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:57.142Z,1492149657.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:57.158Z,1492149657.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:57.520Z,1492149657.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:57.578Z,1492149657.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:57.924Z,1492149657.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:57.954Z,1492149657.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:58.324Z,1492149658.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:58.396Z,1492149658.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:58.710Z,1492149658.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:58.759Z,1492149658.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:59.112Z,1492149659.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:59.127Z,1492149659.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:59.513Z,1492149659.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:59.529Z,1492149659.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:00:59.905Z,1492149659.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:00:59.938Z,1492149659.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:00.314Z,1492149660.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:00.334Z,1492149660.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:00.722Z,1492149660.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:00.738Z,1492149660.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:01.115Z,1492149661.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:01.130Z,1492149661.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:01.506Z,1492149661.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:01.539Z,1492149661.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:01.923Z,1492149661.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:01.938Z,1492149661.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:02.326Z,1492149662.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:02.341Z,1492149662.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:02.729Z,1492149662.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:02.750Z,1492149662.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:03.106Z,1492149663.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:03.146Z,1492149663.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:03.510Z,1492149663.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:03.534Z,1492149663.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:03.908Z,1492149663.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:03.934Z,1492149663.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:04.313Z,1492149664.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:04.334Z,1492149664.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:04.714Z,1492149664.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:04.730Z,1492149664.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:05.113Z,1492149665.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:05.130Z,1492149665.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:05.517Z,1492149665.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:05.534Z,1492149665.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:05.925Z,1492149665.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:05.941Z,1492149665.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:06.327Z,1492149666.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:06.344Z,1492149666.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:06.735Z,1492149666.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:06.752Z,1492149666.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:07.112Z,1492149667.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:07.150Z,1492149667.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:07.503Z,1492149667.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:07.538Z,1492149667.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:07.913Z,1492149667.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:07.940Z,1492149667.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:08.313Z,1492149668.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:08.340Z,1492149668.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:08.709Z,1492149668.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:08.736Z,1492149668.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:09.101Z,1492149669.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:09.179Z,1492149669.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:09.506Z,1492149669.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:09.535Z,1492149669.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:09.905Z,1492149669.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:09.961Z,1492149669.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:10.313Z,1492149670.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:10.354Z,1492149670.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:10.723Z,1492149670.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:10.774Z,1492149670.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:11.124Z,1492149671.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:11.198Z,1492149671.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:11.511Z,1492149671.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:11.526Z,1492149671.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:11.906Z,1492149671.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:11.933Z,1492149671.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:12.310Z,1492149672.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:12.326Z,1492149672.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:12.711Z,1492149672.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:12.727Z,1492149672.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:13.112Z,1492149673.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:13.127Z,1492149673.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:13.515Z,1492149673.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:13.531Z,1492149673.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:13.918Z,1492149673.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:13.934Z,1492149673.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:14.311Z,1492149674.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:14.327Z,1492149674.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:14.699Z,1492149674.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:14.734Z,1492149674.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:15.125Z,1492149675.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:15.146Z,1492149675.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:15.523Z,1492149675.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:15.552Z,1492149675.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:15.921Z,1492149675.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:15.942Z,1492149675.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:16.342Z,1492149676.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:16.366Z,1492149676.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:16.710Z,1492149676.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:16.749Z,1492149676.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:17.110Z,1492149677.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:17.145Z,1492149677.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:17.510Z,1492149677.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:17.540Z,1492149677.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:17.901Z,1492149677.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:17.931Z,1492149677.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:18.301Z,1492149678.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:18.329Z,1492149678.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:18.717Z,1492149678.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:18.734Z,1492149678.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:19.105Z,1492149679.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:19.133Z,1492149679.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:19.508Z,1492149679.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:19.528Z,1492149679.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:19.904Z,1492149679.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:19.934Z,1492149679.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:20.328Z,1492149680.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:20.344Z,1492149680.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:20.705Z,1492149680.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:20.732Z,1492149680.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:21.101Z,1492149681.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:21.128Z,1492149681.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:21.522Z,1492149681.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:21.559Z,1492149681.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:21.895Z,1492149681.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:21.938Z,1492149681.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:22.303Z,1492149682.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:22.319Z,1492149682.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:22.701Z,1492149682.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:22.749Z,1492149682.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:23.108Z,1492149683.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:23.130Z,1492149683.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:23.514Z,1492149683.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:23.574Z,1492149683.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:23.913Z,1492149683.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:23.960Z,1492149683.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:24.301Z,1492149684.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:24.329Z,1492149684.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:24.713Z,1492149684.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:24.729Z,1492149684.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:25.111Z,1492149685.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:25.126Z,1492149685.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:25.508Z,1492149685.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:25.537Z,1492149685.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:25.922Z,1492149685.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:25.937Z,1492149685.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:26.301Z,1492149686.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:26.328Z,1492149686.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:26.714Z,1492149686.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:26.730Z,1492149686.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:27.101Z,1492149687.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:27.128Z,1492149687.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:27.501Z,1492149687.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:27.536Z,1492149687.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:27.901Z,1492149687.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:27.928Z,1492149687.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:28.321Z,1492149688.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:28.342Z,1492149688.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:28.705Z,1492149688.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:28.732Z,1492149688.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:29.105Z,1492149689.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:29.132Z,1492149689.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:29.520Z,1492149689.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:29.542Z,1492149689.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:29.909Z,1492149689.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:29.936Z,1492149689.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:30.309Z,1492149690.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:30.336Z,1492149690.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:30.713Z,1492149690.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:30.740Z,1492149690.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:31.113Z,1492149691.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:31.140Z,1492149691.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:31.504Z,1492149691.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:31.532Z,1492149691.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:31.913Z,1492149691.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:31.929Z,1492149691.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:32.309Z,1492149692.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:32.329Z,1492149692.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:32.717Z,1492149692.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:32.733Z,1492149692.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:33.122Z,1492149693.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:33.142Z,1492149693.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:33.504Z,1492149693.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:33.536Z,1492149693.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:33.914Z,1492149693.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:33.930Z,1492149693.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:34.322Z,1492149694.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:34.337Z,1492149694.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:34.705Z,1492149694.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:34.784Z,1492149694.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:35.105Z,1492149695.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:35.121Z,1492149695.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:35.511Z,1492149695.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:35.562Z,1492149695.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:35.913Z,1492149695.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:35.928Z,1492149695.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:39.402Z,1492149699.402 [NAL9602](INFO): SBD MO Status=2, MOMSN=2116, MT Status=2, MTMSN=0
2017-04-14T06:01:39.402Z,1492149699.402 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:01:39.434Z,1492149699.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:39.486Z,1492149699.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:39.604Z,1492149699.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:39.638Z,1492149699.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:39.953Z,1492149699.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:40.007Z,1492149700.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:40.354Z,1492149700.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:40.391Z,1492149700.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:40.751Z,1492149700.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:40.774Z,1492149700.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:41.150Z,1492149701.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:41.166Z,1492149701.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:41.545Z,1492149701.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:41.582Z,1492149701.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:41.964Z,1492149701.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:41.988Z,1492149701.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:42.357Z,1492149702.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:42.383Z,1492149702.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:42.768Z,1492149702.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:42.786Z,1492149702.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:43.152Z,1492149703.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:43.181Z,1492149703.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:43.541Z,1492149703.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:43.582Z,1492149703.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:43.945Z,1492149703.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:43.978Z,1492149703.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:44.345Z,1492149704.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:44.378Z,1492149704.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:44.742Z,1492149704.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:44.782Z,1492149704.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:45.146Z,1492149705.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:45.271Z,1492149705.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:45.547Z,1492149705.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:45.563Z,1492149705.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:45.949Z,1492149705.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:45.965Z,1492149705.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:46.352Z,1492149706.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:46.368Z,1492149706.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:46.751Z,1492149706.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:46.767Z,1492149706.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:47.229Z,1492149707.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:47.264Z,1492149707.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:47.553Z,1492149707.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:47.594Z,1492149707.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:47.960Z,1492149707.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:47.990Z,1492149707.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:48.361Z,1492149708.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:48.390Z,1492149708.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:48.749Z,1492149708.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:48.790Z,1492149708.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:49.146Z,1492149709.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:49.179Z,1492149709.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:49.541Z,1492149709.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:49.581Z,1492149709.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:49.955Z,1492149709.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:49.970Z,1492149709.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:50.341Z,1492149710.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:50.410Z,1492149710.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:50.745Z,1492149710.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:50.885Z,1492149710.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:51.155Z,1492149711.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:51.171Z,1492149711.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:51.559Z,1492149711.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:51.613Z,1492149711.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:51.952Z,1492149711.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:51.967Z,1492149711.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:52.364Z,1492149712.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:52.418Z,1492149712.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:52.754Z,1492149712.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:52.882Z,1492149712.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:53.149Z,1492149713.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:53.164Z,1492149713.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:53.545Z,1492149713.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:53.569Z,1492149713.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:53.954Z,1492149713.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:53.970Z,1492149713.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:54.352Z,1492149714.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:54.374Z,1492149714.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:54.756Z,1492149714.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:54.771Z,1492149714.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:55.142Z,1492149715.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:55.178Z,1492149715.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:55.547Z,1492149715.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:55.586Z,1492149715.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:55.950Z,1492149715.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:55.986Z,1492149715.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:56.348Z,1492149716.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:56.382Z,1492149716.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:56.750Z,1492149716.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:56.794Z,1492149716.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:57.151Z,1492149717.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:57.188Z,1492149717.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:57.549Z,1492149717.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:57.570Z,1492149717.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:57.949Z,1492149717.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:57.965Z,1492149717.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:58.356Z,1492149718.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:58.410Z,1492149718.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:58.761Z,1492149718.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:58.807Z,1492149718.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:59.203Z,1492149719.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:59.264Z,1492149719.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:59.551Z,1492149719.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:59.567Z,1492149719.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:01:59.951Z,1492149719.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:01:59.967Z,1492149719.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:00.342Z,1492149720.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:00.382Z,1492149720.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:00.742Z,1492149720.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:00.779Z,1492149720.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:01.176Z,1492149721.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:01.234Z,1492149721.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:01.554Z,1492149721.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:01.593Z,1492149721.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:01.949Z,1492149721.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:01.990Z,1492149721.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:02.359Z,1492149722.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:02.410Z,1492149722.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:02.772Z,1492149722.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:02.877Z,1492149722.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:03.151Z,1492149723.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:03.185Z,1492149723.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:03.538Z,1492149723.538 [NAL9602](INFO): SBD MO Status=2, MOMSN=2116, MT Status=2, MTMSN=0
2017-04-14T06:02:03.538Z,1492149723.538 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:02:03.574Z,1492149723.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:03.595Z,1492149723.595 [BPC1](ERROR): Failed to parse message.
2017-04-14T06:02:03.595Z,1492149723.595 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:02:03.595Z,1492149723.595 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:02:03.595Z,1492149723.595 [BPC1](ERROR): Data Fault
2017-04-14T06:02:03.604Z,1492149723.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:03.641Z,1492149723.641 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:02:04.026Z,1492149724.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:04.065Z,1492149724.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:04.350Z,1492149724.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:04.366Z,1492149724.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:04.761Z,1492149724.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:04.777Z,1492149724.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:04.888Z,1492149724.888 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:02:04.888Z,1492149724.888 [BPC1] No Fault, FailCount= 1
2017-04-14T06:02:05.143Z,1492149725.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:05.328Z,1492149725.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:05.543Z,1492149725.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:05.625Z,1492149725.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:05.950Z,1492149725.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:05.970Z,1492149725.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:06.351Z,1492149726.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:06.367Z,1492149726.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:06.770Z,1492149726.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:06.940Z,1492149726.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:07.163Z,1492149727.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:07.336Z,1492149727.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:07.574Z,1492149727.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:07.687Z,1492149727.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:07.954Z,1492149727.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:07.979Z,1492149727.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:08.343Z,1492149728.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:08.432Z,1492149728.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:08.771Z,1492149728.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:08.932Z,1492149728.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:09.141Z,1492149729.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:09.212Z,1492149729.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:09.543Z,1492149729.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:09.600Z,1492149729.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:09.965Z,1492149729.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:10.053Z,1492149730.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:10.349Z,1492149730.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:10.375Z,1492149730.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:10.754Z,1492149730.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:10.778Z,1492149730.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:11.170Z,1492149731.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:11.209Z,1492149731.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:11.541Z,1492149731.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:11.574Z,1492149731.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:11.930Z,1492149731.930 [NAL9602](INFO): SBD MO Status=0, MOMSN=2116, MT Status=0, MTMSN=0
2017-04-14T06:02:11.930Z,1492149731.930 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:02:11.947Z,1492149731.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:11.998Z,1492149731.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:12.348Z,1492149732.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:12.387Z,1492149732.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:12.761Z,1492149732.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:12.806Z,1492149732.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:12.812Z,1492149732.812 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:12.813Z,1492149732.813 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T06:02:12.813Z,1492149732.813 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:02:12.859Z,1492149732.859 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:02:13.197Z,1492149733.197 [NAL9602](INFO): GPS fix at 20170414T060226: (36.802326, -121.787148)
2017-04-14T06:02:13.242Z,1492149733.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:13.320Z,1492149733.320 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:02:13.321Z,1492149733.321 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:02:13.344Z,1492149733.344 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:02:13.344Z,1492149733.344 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T06:02:13.560Z,1492149733.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:13.600Z,1492149733.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:13.600Z,1492149733.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:02:13.600Z,1492149733.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:02:13.607Z,1492149733.607 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:13.607Z,1492149733.607 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:02:13.607Z,1492149733.607 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:02:13.608Z,1492149733.608 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:02:13.609Z,1492149733.609 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:02:13.609Z,1492149733.609 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:02:13.622Z,1492149733.622 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:02:13.622Z,1492149733.622 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:02:13.947Z,1492149733.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:14.024Z,1492149734.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:02:14.024Z,1492149734.024 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:02:14.025Z,1492149734.025 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:02:14.025Z,1492149734.025 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:02:14.360Z,1492149734.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:14.433Z,1492149734.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:02:14.434Z,1492149734.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:02:14.434Z,1492149734.434 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:02:14.447Z,1492149734.447 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:02:14.448Z,1492149734.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:02:14.448Z,1492149734.448 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:02:17.961Z,1492149737.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:18.068Z,1492149738.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:18.181Z,1492149738.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:18.206Z,1492149738.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:18.565Z,1492149738.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:18.623Z,1492149738.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:18.970Z,1492149738.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:18.985Z,1492149738.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:19.376Z,1492149739.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:19.426Z,1492149739.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:19.775Z,1492149739.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:19.819Z,1492149739.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:20.175Z,1492149740.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:20.192Z,1492149740.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:20.575Z,1492149740.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:20.591Z,1492149740.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:20.973Z,1492149740.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:20.994Z,1492149740.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:21.367Z,1492149741.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:21.403Z,1492149741.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:21.748Z,1492149741.748 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0096.lzma
2017-04-14T06:02:21.787Z,1492149741.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:21.803Z,1492149741.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:21.835Z,1492149741.835 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:02:22.165Z,1492149742.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:22.193Z,1492149742.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:22.546Z,1492149742.546 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0096.lzma.bak
2017-04-14T06:02:22.546Z,1492149742.546 [DataOverHttps](INFO): SBD MOMSN=4885317
2017-04-14T06:02:22.567Z,1492149742.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:22.607Z,1492149742.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:22.968Z,1492149742.968 [NAL9602](INFO): Powering down
2017-04-14T06:02:23.012Z,1492149743.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:23.028Z,1492149743.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:23.373Z,1492149743.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:23.405Z,1492149743.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:26.813Z,1492149746.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:26.834Z,1492149746.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:26.952Z,1492149746.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:26.968Z,1492149746.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:27.349Z,1492149747.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:27.370Z,1492149747.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:27.733Z,1492149747.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:27.759Z,1492149747.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:28.129Z,1492149748.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:28.166Z,1492149748.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:28.533Z,1492149748.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:28.569Z,1492149748.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:32.244Z,1492149752.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:32.359Z,1492149752.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:32.436Z,1492149752.436 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0097.lzma
2017-04-14T06:02:32.466Z,1492149752.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:32.486Z,1492149752.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:32.854Z,1492149752.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:32.902Z,1492149752.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:33.226Z,1492149753.226 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0097.lzma.bak
2017-04-14T06:02:33.226Z,1492149753.226 [DataOverHttps](INFO): SBD MOMSN=4885320
2017-04-14T06:02:33.271Z,1492149753.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:33.297Z,1492149753.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:33.671Z,1492149753.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:33.726Z,1492149753.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:33.735Z,1492149753.735 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:02:33.735Z,1492149753.735 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:02:33.735Z,1492149753.736 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:02:34.057Z,1492149754.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:34.107Z,1492149754.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:37.680Z,1492149757.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:37.711Z,1492149757.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:37.802Z,1492149757.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:37.831Z,1492149757.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:38.173Z,1492149758.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:38.188Z,1492149758.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:38.578Z,1492149758.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:38.602Z,1492149758.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:38.976Z,1492149758.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:39.000Z,1492149759.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:39.377Z,1492149759.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:39.392Z,1492149759.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:39.781Z,1492149759.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:39.797Z,1492149759.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:40.053Z,1492149760.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:40.172Z,1492149760.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:40.203Z,1492149760.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:40.568Z,1492149760.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:40.595Z,1492149760.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:40.848Z,1492149760.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:40.967Z,1492149760.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:41.003Z,1492149761.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:41.368Z,1492149761.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:41.402Z,1492149761.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:41.775Z,1492149761.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:41.806Z,1492149761.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:42.172Z,1492149762.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:42.204Z,1492149762.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:42.565Z,1492149762.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:42.598Z,1492149762.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:42.971Z,1492149762.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:43.006Z,1492149763.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:43.377Z,1492149763.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:43.412Z,1492149763.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:43.816Z,1492149763.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:43.832Z,1492149763.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:44.170Z,1492149764.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:44.194Z,1492149764.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:44.579Z,1492149764.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:44.595Z,1492149764.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:44.974Z,1492149764.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:44.990Z,1492149764.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:45.381Z,1492149765.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:45.397Z,1492149765.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:45.781Z,1492149765.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:45.798Z,1492149765.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:46.165Z,1492149766.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:46.230Z,1492149766.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:46.565Z,1492149766.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:46.611Z,1492149766.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:46.965Z,1492149766.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:47.000Z,1492149767.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:47.365Z,1492149767.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:47.414Z,1492149767.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:47.768Z,1492149767.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:47.804Z,1492149767.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:48.163Z,1492149768.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:48.214Z,1492149768.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:48.569Z,1492149768.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:48.625Z,1492149768.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:48.974Z,1492149768.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:49.003Z,1492149769.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:49.366Z,1492149769.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:49.382Z,1492149769.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:49.765Z,1492149769.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:49.781Z,1492149769.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:50.170Z,1492149770.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:50.186Z,1492149770.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:50.573Z,1492149770.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:50.590Z,1492149770.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:50.973Z,1492149770.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:50.994Z,1492149770.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:51.377Z,1492149771.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:51.393Z,1492149771.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:51.773Z,1492149771.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:51.789Z,1492149771.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:52.173Z,1492149772.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:52.190Z,1492149772.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:52.565Z,1492149772.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:52.596Z,1492149772.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:52.965Z,1492149772.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:53.002Z,1492149773.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:53.368Z,1492149773.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:53.401Z,1492149773.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:53.768Z,1492149773.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:53.810Z,1492149773.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:54.162Z,1492149774.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:54.177Z,1492149774.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:54.569Z,1492149774.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:54.585Z,1492149774.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:54.970Z,1492149774.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:54.985Z,1492149774.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:55.373Z,1492149775.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:55.391Z,1492149775.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:55.772Z,1492149775.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:55.793Z,1492149775.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:56.172Z,1492149776.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:56.203Z,1492149776.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:56.581Z,1492149776.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:56.602Z,1492149776.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:56.969Z,1492149776.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:56.996Z,1492149776.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:57.385Z,1492149777.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:57.416Z,1492149777.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:57.772Z,1492149777.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:57.806Z,1492149777.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:58.174Z,1492149778.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:58.206Z,1492149778.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:58.574Z,1492149778.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:58.614Z,1492149778.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:58.974Z,1492149778.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:58.990Z,1492149778.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:59.370Z,1492149779.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:59.391Z,1492149779.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:02:59.772Z,1492149779.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:02:59.791Z,1492149779.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:00.178Z,1492149780.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:00.194Z,1492149780.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:00.575Z,1492149780.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:00.641Z,1492149780.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:00.966Z,1492149780.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:01.032Z,1492149781.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:01.370Z,1492149781.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:01.390Z,1492149781.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:01.780Z,1492149781.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:01.839Z,1492149781.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:02.175Z,1492149782.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:02.216Z,1492149782.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:02.586Z,1492149782.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:02.658Z,1492149782.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:02.998Z,1492149782.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:03.135Z,1492149783.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:03.394Z,1492149783.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:03.487Z,1492149783.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:03.776Z,1492149783.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:03.870Z,1492149783.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:04.192Z,1492149784.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:04.241Z,1492149784.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:04.572Z,1492149784.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:04.587Z,1492149784.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:04.967Z,1492149784.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:05.003Z,1492149785.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:05.421Z,1492149785.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:05.470Z,1492149785.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:05.820Z,1492149785.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:05.853Z,1492149785.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:06.206Z,1492149786.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:06.258Z,1492149786.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:06.678Z,1492149786.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:06.702Z,1492149786.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:06.964Z,1492149786.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:06.982Z,1492149786.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:07.382Z,1492149787.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:07.462Z,1492149787.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:07.775Z,1492149787.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:07.791Z,1492149787.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:08.172Z,1492149788.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:08.194Z,1492149788.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:08.562Z,1492149788.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:08.594Z,1492149788.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:08.969Z,1492149788.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:08.996Z,1492149788.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:09.368Z,1492149789.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:09.392Z,1492149789.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:09.773Z,1492149789.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:09.794Z,1492149789.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:10.178Z,1492149790.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:10.194Z,1492149790.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:10.581Z,1492149790.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:10.596Z,1492149790.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:10.965Z,1492149790.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:10.998Z,1492149790.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:11.370Z,1492149791.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:11.406Z,1492149791.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:11.762Z,1492149791.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:11.778Z,1492149791.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:12.177Z,1492149792.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:12.192Z,1492149792.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:12.573Z,1492149792.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:12.594Z,1492149792.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:12.973Z,1492149792.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:12.994Z,1492149792.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:13.373Z,1492149793.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:13.397Z,1492149793.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:13.781Z,1492149793.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:13.798Z,1492149793.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:14.204Z,1492149794.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:14.245Z,1492149794.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:14.601Z,1492149794.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:14.617Z,1492149794.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:14.974Z,1492149794.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:15.086Z,1492149795.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:15.384Z,1492149795.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:15.463Z,1492149795.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:15.773Z,1492149795.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:15.804Z,1492149795.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:16.165Z,1492149796.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:16.209Z,1492149796.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:16.575Z,1492149796.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:16.645Z,1492149796.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:16.990Z,1492149796.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:17.042Z,1492149797.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:17.365Z,1492149797.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:17.441Z,1492149797.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:17.765Z,1492149797.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:17.815Z,1492149797.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:18.166Z,1492149798.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:18.192Z,1492149798.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:18.565Z,1492149798.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:18.592Z,1492149798.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:18.974Z,1492149798.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:18.990Z,1492149798.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:19.376Z,1492149799.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:19.413Z,1492149799.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:19.774Z,1492149799.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:19.802Z,1492149799.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:20.177Z,1492149800.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:20.194Z,1492149800.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:20.577Z,1492149800.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:20.628Z,1492149800.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:20.975Z,1492149800.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:21.020Z,1492149801.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:21.380Z,1492149801.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:21.396Z,1492149801.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:21.803Z,1492149801.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:21.850Z,1492149801.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:22.174Z,1492149802.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:22.222Z,1492149802.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:22.616Z,1492149802.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:22.659Z,1492149802.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:22.972Z,1492149802.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:23.074Z,1492149803.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:23.370Z,1492149803.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:23.428Z,1492149803.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:23.810Z,1492149803.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:23.903Z,1492149803.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:24.182Z,1492149804.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:24.231Z,1492149804.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:24.583Z,1492149804.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:24.652Z,1492149804.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:24.977Z,1492149804.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:25.102Z,1492149805.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:25.390Z,1492149805.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:25.454Z,1492149805.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:25.766Z,1492149805.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:25.799Z,1492149805.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:26.201Z,1492149806.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:26.254Z,1492149806.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:26.575Z,1492149806.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:26.591Z,1492149806.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:27.002Z,1492149807.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:27.018Z,1492149807.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:27.383Z,1492149807.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:27.415Z,1492149807.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:27.776Z,1492149807.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:27.800Z,1492149807.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:28.166Z,1492149808.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:28.193Z,1492149808.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:28.583Z,1492149808.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:28.599Z,1492149808.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:28.978Z,1492149808.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:29.014Z,1492149809.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:29.384Z,1492149809.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:29.410Z,1492149809.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:29.784Z,1492149809.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:29.839Z,1492149809.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:30.178Z,1492149810.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:30.251Z,1492149810.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:30.573Z,1492149810.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:30.591Z,1492149810.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:30.965Z,1492149810.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:31.003Z,1492149811.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:31.366Z,1492149811.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:31.418Z,1492149811.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:31.769Z,1492149811.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:31.800Z,1492149811.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:32.178Z,1492149812.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:32.219Z,1492149812.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:32.565Z,1492149812.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:32.620Z,1492149812.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:32.980Z,1492149812.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:32.996Z,1492149812.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:33.385Z,1492149813.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:33.406Z,1492149813.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:33.769Z,1492149813.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:33.795Z,1492149813.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:34.184Z,1492149814.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:34.201Z,1492149814.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:37.899Z,1492149817.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:37.922Z,1492149817.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:38.033Z,1492149818.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:38.061Z,1492149818.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:38.394Z,1492149818.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:38.410Z,1492149818.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:38.793Z,1492149818.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:38.808Z,1492149818.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:39.197Z,1492149819.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:39.238Z,1492149819.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:39.601Z,1492149819.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:39.647Z,1492149819.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:39.998Z,1492149819.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:40.037Z,1492149820.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:40.398Z,1492149820.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:40.414Z,1492149820.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:40.794Z,1492149820.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:40.814Z,1492149820.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:41.184Z,1492149821.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:41.212Z,1492149821.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:41.592Z,1492149821.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:41.626Z,1492149821.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:41.985Z,1492149821.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:42.013Z,1492149822.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:42.381Z,1492149822.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:42.408Z,1492149822.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:42.785Z,1492149822.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:42.813Z,1492149822.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:43.185Z,1492149823.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:43.210Z,1492149823.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:43.601Z,1492149823.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:43.618Z,1492149823.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:43.981Z,1492149823.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:43.989Z,1492149823.989 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:03:43.990Z,1492149823.990 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:03:43.990Z,1492149823.990 [BPC1](ERROR): Data Fault
2017-04-14T06:03:44.011Z,1492149824.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:44.057Z,1492149824.057 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:03:44.393Z,1492149824.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:44.425Z,1492149824.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:44.786Z,1492149824.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:44.801Z,1492149824.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:45.185Z,1492149825.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:45.222Z,1492149825.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:45.262Z,1492149825.263 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:03:45.263Z,1492149825.263 [BPC1] No Fault, FailCount= 1
2017-04-14T06:03:45.589Z,1492149825.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:45.673Z,1492149825.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:45.985Z,1492149825.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:46.041Z,1492149826.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:46.393Z,1492149826.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:46.417Z,1492149826.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:46.794Z,1492149826.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:46.809Z,1492149826.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:47.190Z,1492149827.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:47.206Z,1492149827.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:47.589Z,1492149827.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:47.604Z,1492149827.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:47.992Z,1492149827.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:48.014Z,1492149828.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:48.390Z,1492149828.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:48.406Z,1492149828.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:48.791Z,1492149828.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:48.814Z,1492149828.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:49.197Z,1492149829.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:49.213Z,1492149829.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:49.590Z,1492149829.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:49.606Z,1492149829.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:49.978Z,1492149829.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:50.006Z,1492149830.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:50.381Z,1492149830.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:50.419Z,1492149830.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:50.785Z,1492149830.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:50.811Z,1492149830.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:51.201Z,1492149831.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:51.223Z,1492149831.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:51.589Z,1492149831.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:51.616Z,1492149831.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:51.981Z,1492149831.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:52.018Z,1492149832.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:52.378Z,1492149832.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:52.394Z,1492149832.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:52.789Z,1492149832.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:52.822Z,1492149832.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:53.181Z,1492149833.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:53.225Z,1492149833.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:53.581Z,1492149833.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:53.624Z,1492149833.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:53.989Z,1492149833.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:54.022Z,1492149834.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:54.389Z,1492149834.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:54.420Z,1492149834.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:54.786Z,1492149834.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:54.802Z,1492149834.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:55.189Z,1492149835.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:55.210Z,1492149835.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:55.593Z,1492149835.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:55.608Z,1492149835.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:55.988Z,1492149835.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:56.004Z,1492149836.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:56.393Z,1492149836.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:56.409Z,1492149836.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:56.791Z,1492149836.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:56.807Z,1492149836.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:57.181Z,1492149837.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:57.202Z,1492149837.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:57.585Z,1492149837.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:57.601Z,1492149837.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:57.986Z,1492149837.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:58.081Z,1492149838.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:58.389Z,1492149838.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:58.405Z,1492149838.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:58.781Z,1492149838.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:58.808Z,1492149838.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:59.181Z,1492149839.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:59.230Z,1492149839.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:59.581Z,1492149839.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:03:59.608Z,1492149839.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:03:59.985Z,1492149839.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:00.056Z,1492149840.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:00.385Z,1492149840.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:00.411Z,1492149840.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:00.801Z,1492149840.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:00.862Z,1492149840.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:01.181Z,1492149841.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:01.218Z,1492149841.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:01.581Z,1492149841.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:01.628Z,1492149841.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:01.981Z,1492149841.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:02.009Z,1492149842.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:02.381Z,1492149842.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:02.417Z,1492149842.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:02.781Z,1492149842.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:02.824Z,1492149842.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:03.181Z,1492149843.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:03.209Z,1492149843.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:03.585Z,1492149843.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:03.622Z,1492149843.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:03.978Z,1492149843.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:03.993Z,1492149843.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:04.378Z,1492149844.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:04.394Z,1492149844.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:04.789Z,1492149844.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:04.830Z,1492149844.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:05.186Z,1492149845.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:05.201Z,1492149845.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:05.583Z,1492149845.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:05.599Z,1492149845.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:05.990Z,1492149845.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:06.006Z,1492149846.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:06.387Z,1492149846.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:06.407Z,1492149846.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:06.789Z,1492149846.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:06.805Z,1492149846.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:07.188Z,1492149847.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:07.209Z,1492149847.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:07.593Z,1492149847.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:07.613Z,1492149847.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:08.014Z,1492149848.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:08.042Z,1492149848.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:08.416Z,1492149848.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:08.432Z,1492149848.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:08.793Z,1492149848.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:08.820Z,1492149848.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:09.189Z,1492149849.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:09.271Z,1492149849.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:09.583Z,1492149849.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:09.636Z,1492149849.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:09.998Z,1492149849.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:10.057Z,1492149850.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:10.392Z,1492149850.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:10.420Z,1492149850.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:10.781Z,1492149850.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:10.808Z,1492149850.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:11.181Z,1492149851.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:11.210Z,1492149851.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:11.597Z,1492149851.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:11.621Z,1492149851.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:11.981Z,1492149851.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:12.014Z,1492149852.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:12.381Z,1492149852.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:12.422Z,1492149852.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:12.786Z,1492149852.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:12.838Z,1492149852.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:13.190Z,1492149853.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:13.262Z,1492149853.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:13.589Z,1492149853.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:13.604Z,1492149853.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:13.993Z,1492149853.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:14.009Z,1492149854.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:14.397Z,1492149854.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:14.450Z,1492149854.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:14.789Z,1492149854.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:14.804Z,1492149854.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:15.189Z,1492149855.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:15.249Z,1492149855.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:15.600Z,1492149855.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:15.646Z,1492149855.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:15.994Z,1492149855.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:16.009Z,1492149856.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:16.398Z,1492149856.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:16.414Z,1492149856.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:16.798Z,1492149856.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:16.818Z,1492149856.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:17.185Z,1492149857.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:17.213Z,1492149857.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:17.581Z,1492149857.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:17.623Z,1492149857.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:17.985Z,1492149857.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:18.013Z,1492149858.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:18.386Z,1492149858.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:18.412Z,1492149858.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:18.783Z,1492149858.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:18.819Z,1492149858.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:19.191Z,1492149859.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:19.219Z,1492149859.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:19.581Z,1492149859.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:19.618Z,1492149859.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:19.978Z,1492149859.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:20.008Z,1492149860.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:20.387Z,1492149860.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:20.404Z,1492149860.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:20.790Z,1492149860.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:20.806Z,1492149860.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:21.190Z,1492149861.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:21.207Z,1492149861.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:21.589Z,1492149861.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:21.605Z,1492149861.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:21.989Z,1492149861.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:22.005Z,1492149862.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:22.386Z,1492149862.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:22.403Z,1492149862.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:22.789Z,1492149862.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:22.811Z,1492149862.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:23.184Z,1492149863.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:23.210Z,1492149863.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:23.588Z,1492149863.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:23.609Z,1492149863.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:23.988Z,1492149863.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:24.009Z,1492149864.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:24.384Z,1492149864.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:24.408Z,1492149864.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:24.790Z,1492149864.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:24.814Z,1492149864.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:25.197Z,1492149865.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:25.213Z,1492149865.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:25.581Z,1492149865.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:25.613Z,1492149865.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:25.981Z,1492149865.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:26.017Z,1492149866.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:26.381Z,1492149866.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:26.417Z,1492149866.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:26.781Z,1492149866.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:26.814Z,1492149866.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:27.185Z,1492149867.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:27.212Z,1492149867.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:27.581Z,1492149867.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:27.681Z,1492149867.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:27.983Z,1492149867.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:28.018Z,1492149868.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:28.389Z,1492149868.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:28.425Z,1492149868.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:28.795Z,1492149868.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:28.834Z,1492149868.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:29.193Z,1492149869.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:29.228Z,1492149869.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:29.588Z,1492149869.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:29.634Z,1492149869.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:29.985Z,1492149869.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:30.039Z,1492149870.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:30.391Z,1492149870.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:30.406Z,1492149870.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:30.793Z,1492149870.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:30.826Z,1492149870.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:31.192Z,1492149871.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:31.233Z,1492149871.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:31.590Z,1492149871.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:31.608Z,1492149871.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:31.990Z,1492149871.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:32.006Z,1492149872.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:32.388Z,1492149872.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:32.403Z,1492149872.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:32.789Z,1492149872.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:32.810Z,1492149872.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:33.192Z,1492149873.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:33.208Z,1492149873.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:33.593Z,1492149873.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:33.608Z,1492149873.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:33.989Z,1492149873.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:34.010Z,1492149874.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:34.389Z,1492149874.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:34.405Z,1492149874.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:38.096Z,1492149878.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:38.112Z,1492149878.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:38.228Z,1492149878.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:38.273Z,1492149878.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:38.678Z,1492149878.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:38.718Z,1492149878.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:39.020Z,1492149879.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:39.054Z,1492149879.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:39.426Z,1492149879.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:39.442Z,1492149879.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:39.827Z,1492149879.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:39.843Z,1492149879.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:40.218Z,1492149880.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:40.242Z,1492149880.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:40.657Z,1492149880.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:40.697Z,1492149880.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:41.014Z,1492149881.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:41.050Z,1492149881.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:41.406Z,1492149881.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:41.454Z,1492149881.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:41.806Z,1492149881.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:41.930Z,1492149881.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:42.209Z,1492149882.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:42.274Z,1492149882.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:42.653Z,1492149882.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:42.688Z,1492149882.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:43.005Z,1492149883.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:43.072Z,1492149883.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:43.405Z,1492149883.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:43.440Z,1492149883.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:43.807Z,1492149883.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:43.862Z,1492149883.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:44.209Z,1492149884.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:44.285Z,1492149884.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:44.675Z,1492149884.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:44.741Z,1492149884.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:45.025Z,1492149885.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:45.066Z,1492149885.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:45.413Z,1492149885.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:45.440Z,1492149885.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:45.813Z,1492149885.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:45.882Z,1492149885.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:46.219Z,1492149886.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:46.234Z,1492149886.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:46.630Z,1492149886.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:46.653Z,1492149886.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:47.029Z,1492149887.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:47.045Z,1492149887.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:47.405Z,1492149887.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:47.489Z,1492149887.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:47.824Z,1492149887.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:47.869Z,1492149887.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:48.213Z,1492149888.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:48.231Z,1492149888.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:48.639Z,1492149888.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:48.658Z,1492149888.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:49.044Z,1492149889.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:49.186Z,1492149889.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:49.447Z,1492149889.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:49.586Z,1492149889.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:49.838Z,1492149889.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:49.887Z,1492149889.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:50.207Z,1492149890.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:50.325Z,1492149890.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:50.672Z,1492149890.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:50.745Z,1492149890.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:51.070Z,1492149891.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:51.110Z,1492149891.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:51.440Z,1492149891.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:51.493Z,1492149891.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:51.826Z,1492149891.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:51.908Z,1492149891.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:52.206Z,1492149892.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:52.282Z,1492149892.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:52.664Z,1492149892.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:52.748Z,1492149892.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:53.006Z,1492149893.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:53.058Z,1492149893.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:53.414Z,1492149893.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:53.461Z,1492149893.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:53.805Z,1492149893.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:53.831Z,1492149893.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:54.205Z,1492149894.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:54.228Z,1492149894.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:54.614Z,1492149894.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:54.659Z,1492149894.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:55.022Z,1492149895.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:55.050Z,1492149895.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:55.405Z,1492149895.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:55.428Z,1492149895.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:55.810Z,1492149895.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:55.869Z,1492149895.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:56.206Z,1492149896.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:56.297Z,1492149896.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:56.618Z,1492149896.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:56.634Z,1492149896.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:57.040Z,1492149897.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:57.064Z,1492149897.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:57.405Z,1492149897.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:57.462Z,1492149897.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:57.811Z,1492149897.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:57.851Z,1492149897.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:58.213Z,1492149898.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:58.263Z,1492149898.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:58.672Z,1492149898.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:58.755Z,1492149898.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:59.013Z,1492149899.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:59.069Z,1492149899.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:59.430Z,1492149899.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:59.446Z,1492149899.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:04:59.813Z,1492149899.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:04:59.864Z,1492149899.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:00.213Z,1492149900.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:00.237Z,1492149900.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:00.619Z,1492149900.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:00.641Z,1492149900.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:01.005Z,1492149901.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:01.041Z,1492149901.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:01.405Z,1492149901.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:01.458Z,1492149901.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:01.833Z,1492149901.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:01.856Z,1492149901.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:02.244Z,1492149902.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:02.280Z,1492149902.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:02.609Z,1492149902.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:02.643Z,1492149902.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:03.005Z,1492149903.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:03.056Z,1492149903.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:03.413Z,1492149903.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:03.462Z,1492149903.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:03.812Z,1492149903.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:03.894Z,1492149903.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:04.227Z,1492149904.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:04.252Z,1492149904.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:04.607Z,1492149904.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:04.655Z,1492149904.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:05.014Z,1492149905.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:05.059Z,1492149905.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:05.426Z,1492149905.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:05.461Z,1492149905.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:05.823Z,1492149905.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:05.859Z,1492149905.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:06.214Z,1492149906.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:06.261Z,1492149906.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:06.617Z,1492149906.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:06.666Z,1492149906.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:07.029Z,1492149907.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:07.084Z,1492149907.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:07.424Z,1492149907.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:07.475Z,1492149907.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:07.807Z,1492149907.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:07.875Z,1492149907.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:08.205Z,1492149908.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:08.256Z,1492149908.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:08.608Z,1492149908.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:08.694Z,1492149908.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:09.012Z,1492149909.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:09.063Z,1492149909.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:09.421Z,1492149909.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:09.459Z,1492149909.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:09.814Z,1492149909.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:09.856Z,1492149909.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:10.225Z,1492149910.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:10.257Z,1492149910.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:10.619Z,1492149910.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:10.686Z,1492149910.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:11.014Z,1492149911.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:11.076Z,1492149911.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:11.414Z,1492149911.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:11.440Z,1492149911.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:11.826Z,1492149911.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:11.843Z,1492149911.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:12.223Z,1492149912.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:12.266Z,1492149912.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:12.647Z,1492149912.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:12.737Z,1492149912.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:13.005Z,1492149913.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:13.099Z,1492149913.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:13.410Z,1492149913.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:13.481Z,1492149913.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:13.819Z,1492149913.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:13.904Z,1492149913.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:13.919Z,1492149913.919 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:13.919Z,1492149913.919 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:05:13.919Z,1492149913.919 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:05:13.933Z,1492149913.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:05:14.231Z,1492149914.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:14.249Z,1492149914.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:14.316Z,1492149914.316 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:05:14.317Z,1492149914.316 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:05:14.608Z,1492149914.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:14.675Z,1492149914.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:14.675Z,1492149914.675 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:05:14.675Z,1492149914.675 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:05:14.690Z,1492149914.690 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:14.690Z,1492149914.690 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:05:14.690Z,1492149914.690 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:05:14.703Z,1492149914.703 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:05:14.704Z,1492149914.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:05:14.704Z,1492149914.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:05:14.749Z,1492149914.749 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:05:14.749Z,1492149914.749 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:05:15.044Z,1492149915.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:15.147Z,1492149915.147 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:05:15.147Z,1492149915.147 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:05:15.160Z,1492149915.160 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:05:15.160Z,1492149915.160 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:05:15.428Z,1492149915.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:15.520Z,1492149915.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:05:15.521Z,1492149915.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:05:15.521Z,1492149915.521 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:05:15.535Z,1492149915.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:05:15.543Z,1492149915.543 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:05:15.544Z,1492149915.544 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:05:15.815Z,1492149915.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:15.851Z,1492149915.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:16.217Z,1492149916.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:16.226Z,1492149916.226 [PNI_TCM](ERROR): CRC does not match. Expected:0x44002 got:0x31489
2017-04-14T06:05:16.268Z,1492149916.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:16.621Z,1492149916.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:16.637Z,1492149916.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:17.030Z,1492149917.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:17.066Z,1492149917.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:17.411Z,1492149917.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:17.446Z,1492149917.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:17.821Z,1492149917.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:17.837Z,1492149917.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:18.220Z,1492149918.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:18.237Z,1492149918.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:18.620Z,1492149918.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:18.637Z,1492149918.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:19.005Z,1492149919.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:19.064Z,1492149919.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:19.412Z,1492149919.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:19.443Z,1492149919.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:19.810Z,1492149919.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:19.848Z,1492149919.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:20.212Z,1492149920.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:20.249Z,1492149920.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:20.605Z,1492149920.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:20.660Z,1492149920.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:21.014Z,1492149921.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:21.048Z,1492149921.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:21.428Z,1492149921.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:21.446Z,1492149921.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:21.818Z,1492149921.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:21.835Z,1492149921.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:22.213Z,1492149922.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:22.241Z,1492149922.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:22.621Z,1492149922.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:22.650Z,1492149922.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:23.036Z,1492149923.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:23.060Z,1492149923.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:23.412Z,1492149923.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:23.462Z,1492149923.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:23.881Z,1492149923.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:23.957Z,1492149923.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:24.215Z,1492149924.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:24.282Z,1492149924.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:24.676Z,1492149924.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:24.773Z,1492149924.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:25.098Z,1492149925.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:25.157Z,1492149925.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:25.435Z,1492149925.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:25.651Z,1492149925.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:25.938Z,1492149925.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:26.049Z,1492149926.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:26.316Z,1492149926.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:26.382Z,1492149926.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:26.682Z,1492149926.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:26.729Z,1492149926.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:27.086Z,1492149927.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:27.185Z,1492149927.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:27.473Z,1492149927.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:27.522Z,1492149927.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:27.900Z,1492149927.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:27.965Z,1492149927.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:28.272Z,1492149928.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:28.316Z,1492149928.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:28.680Z,1492149928.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:28.723Z,1492149928.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:29.081Z,1492149929.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:29.122Z,1492149929.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:29.479Z,1492149929.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:29.501Z,1492149929.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:29.877Z,1492149929.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:29.898Z,1492149929.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:30.276Z,1492149930.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:30.292Z,1492149930.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:30.677Z,1492149930.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:30.692Z,1492149930.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:31.076Z,1492149931.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:31.131Z,1492149931.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:31.469Z,1492149931.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:31.516Z,1492149931.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:31.877Z,1492149931.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:31.914Z,1492149931.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:32.275Z,1492149932.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:32.308Z,1492149932.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:32.676Z,1492149932.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:32.691Z,1492149932.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:33.074Z,1492149933.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:33.090Z,1492149933.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:33.474Z,1492149933.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:33.490Z,1492149933.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:33.874Z,1492149933.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:33.897Z,1492149933.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:34.278Z,1492149934.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:34.300Z,1492149934.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:34.680Z,1492149934.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:34.696Z,1492149934.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:38.401Z,1492149938.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:38.439Z,1492149938.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:38.600Z,1492149938.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:38.629Z,1492149938.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:38.956Z,1492149938.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:38.997Z,1492149938.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:39.347Z,1492149939.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:39.410Z,1492149939.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:39.752Z,1492149939.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:39.800Z,1492149939.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:40.144Z,1492149940.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:40.173Z,1492149940.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:40.614Z,1492149940.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:40.658Z,1492149940.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:40.973Z,1492149940.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:41.049Z,1492149941.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:41.347Z,1492149941.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:41.403Z,1492149941.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:41.750Z,1492149941.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:41.806Z,1492149941.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:42.155Z,1492149942.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:42.230Z,1492149942.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:42.545Z,1492149942.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:42.575Z,1492149942.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:42.956Z,1492149942.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:42.990Z,1492149942.990 [PNI_TCM](ERROR): CRC does not match. Expected:0x11197 got:0x49444
2017-04-14T06:05:43.020Z,1492149943.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:43.341Z,1492149943.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:43.405Z,1492149943.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:43.736Z,1492149943.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:43.795Z,1492149943.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:44.171Z,1492149944.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:44.190Z,1492149944.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:44.553Z,1492149944.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:44.598Z,1492149944.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:44.981Z,1492149944.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:45.002Z,1492149945.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:45.344Z,1492149945.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:45.385Z,1492149945.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:45.742Z,1492149945.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:45.769Z,1492149945.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:46.138Z,1492149946.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:46.228Z,1492149946.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:46.539Z,1492149946.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:46.602Z,1492149946.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:46.941Z,1492149946.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:46.980Z,1492149946.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:47.341Z,1492149947.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:47.366Z,1492149947.366 [PNI_TCM](ERROR): CRC does not match. Expected:0x52094 got:0x9301
2017-04-14T06:05:47.409Z,1492149947.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:47.743Z,1492149947.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:47.801Z,1492149947.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:48.145Z,1492149948.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:48.175Z,1492149948.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:48.561Z,1492149948.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:48.590Z,1492149948.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:48.951Z,1492149948.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:48.987Z,1492149948.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:49.355Z,1492149949.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:49.434Z,1492149949.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:49.749Z,1492149949.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:49.798Z,1492149949.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:50.178Z,1492149950.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:50.198Z,1492149950.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:50.591Z,1492149950.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:50.644Z,1492149950.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:50.963Z,1492149950.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:50.999Z,1492149950.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:51.351Z,1492149951.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:51.396Z,1492149951.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:51.745Z,1492149951.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:51.774Z,1492149951.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:52.150Z,1492149952.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:52.175Z,1492149952.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:52.549Z,1492149952.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:52.602Z,1492149952.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:52.937Z,1492149952.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:52.972Z,1492149952.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:53.338Z,1492149953.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:53.386Z,1492149953.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:53.742Z,1492149953.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:53.776Z,1492149953.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:54.137Z,1492149954.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:54.225Z,1492149954.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:54.581Z,1492149954.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:54.665Z,1492149954.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:54.963Z,1492149954.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:54.979Z,1492149954.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:55.350Z,1492149955.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:55.396Z,1492149955.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:55.745Z,1492149955.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:55.818Z,1492149955.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:56.147Z,1492149956.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:56.202Z,1492149956.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:56.582Z,1492149956.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:56.638Z,1492149956.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:56.944Z,1492149956.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:56.992Z,1492149956.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:57.350Z,1492149957.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:57.428Z,1492149957.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:57.741Z,1492149957.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:57.766Z,1492149957.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T06:05:57.803Z,1492149957.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:58.150Z,1492149958.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:58.185Z,1492149958.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:58.551Z,1492149958.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:58.605Z,1492149958.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:58.943Z,1492149958.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:58.998Z,1492149958.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:59.345Z,1492149959.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:59.366Z,1492149959.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:05:59.757Z,1492149959.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:05:59.786Z,1492149959.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:00.149Z,1492149960.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:00.165Z,1492149960.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:00.547Z,1492149960.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:00.595Z,1492149960.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:00.952Z,1492149960.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:00.959Z,1492149960.959 [PNI_TCM](ERROR): CRC does not match. Expected:0x39284 got:0x7361
2017-04-14T06:06:00.984Z,1492149960.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:01.351Z,1492149961.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:01.367Z,1492149961.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:01.752Z,1492149961.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:01.768Z,1492149961.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:02.168Z,1492149962.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:02.248Z,1492149962.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:02.552Z,1492149962.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:02.570Z,1492149962.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:02.944Z,1492149962.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:02.974Z,1492149962.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:03.339Z,1492149963.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:03.365Z,1492149963.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:03.739Z,1492149963.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:03.809Z,1492149963.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:04.138Z,1492149964.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:04.174Z,1492149964.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:04.545Z,1492149964.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:04.575Z,1492149964.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:04.943Z,1492149964.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:04.978Z,1492149964.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:05.337Z,1492149965.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:05.382Z,1492149965.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:05.740Z,1492149965.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:05.774Z,1492149965.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:06.145Z,1492149966.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:06.174Z,1492149966.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:06.539Z,1492149966.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:06.576Z,1492149966.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:06.960Z,1492149966.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:06.994Z,1492149966.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:07.369Z,1492149967.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:07.384Z,1492149967.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:07.752Z,1492149967.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:07.773Z,1492149967.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:08.145Z,1492149968.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:08.176Z,1492149968.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:08.570Z,1492149968.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:08.630Z,1492149968.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:08.941Z,1492149968.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:08.982Z,1492149968.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:09.350Z,1492149969.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:09.402Z,1492149969.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:09.747Z,1492149969.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:09.798Z,1492149969.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:10.148Z,1492149970.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:10.163Z,1492149970.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:10.546Z,1492149970.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:10.598Z,1492149970.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:10.948Z,1492149970.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:10.986Z,1492149970.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:11.346Z,1492149971.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:11.390Z,1492149971.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:11.751Z,1492149971.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:11.803Z,1492149971.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:12.151Z,1492149972.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:12.185Z,1492149972.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:12.550Z,1492149972.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:12.565Z,1492149972.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:12.953Z,1492149972.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:12.974Z,1492149972.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:13.356Z,1492149973.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:13.376Z,1492149973.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:13.756Z,1492149973.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:13.773Z,1492149973.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:14.145Z,1492149974.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:14.161Z,1492149974.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:14.545Z,1492149974.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:14.566Z,1492149974.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:14.942Z,1492149974.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:14.977Z,1492149974.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:15.339Z,1492149975.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:15.365Z,1492149975.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:15.753Z,1492149975.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:15.774Z,1492149975.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:16.137Z,1492149976.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:16.163Z,1492149976.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:16.541Z,1492149976.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:16.572Z,1492149976.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:16.942Z,1492149976.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:16.969Z,1492149976.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:17.353Z,1492149977.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:17.374Z,1492149977.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:17.737Z,1492149977.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:17.770Z,1492149977.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:18.156Z,1492149978.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:18.172Z,1492149978.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:18.539Z,1492149978.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:18.570Z,1492149978.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:18.943Z,1492149978.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:18.970Z,1492149978.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:19.352Z,1492149979.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:19.373Z,1492149979.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:19.747Z,1492149979.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:19.785Z,1492149979.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:20.182Z,1492149980.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:20.198Z,1492149980.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:20.565Z,1492149980.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:20.589Z,1492149980.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:20.951Z,1492149980.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:21.001Z,1492149981.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:21.408Z,1492149981.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:21.460Z,1492149981.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:21.754Z,1492149981.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:21.778Z,1492149981.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:22.138Z,1492149982.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:22.200Z,1492149982.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:22.562Z,1492149982.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:22.610Z,1492149982.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:22.979Z,1492149982.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:23.016Z,1492149983.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:23.343Z,1492149983.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:23.379Z,1492149983.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:23.757Z,1492149983.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:23.796Z,1492149983.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:24.142Z,1492149984.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:24.225Z,1492149984.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:24.550Z,1492149984.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:24.566Z,1492149984.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:24.955Z,1492149984.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:25.013Z,1492149985.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:25.358Z,1492149985.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:25.407Z,1492149985.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:25.751Z,1492149985.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:25.795Z,1492149985.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:26.151Z,1492149986.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:26.197Z,1492149986.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:26.544Z,1492149986.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:26.561Z,1492149986.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:26.955Z,1492149986.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:26.972Z,1492149986.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:27.345Z,1492149987.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:27.363Z,1492149987.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:27.757Z,1492149987.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:27.774Z,1492149987.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:28.152Z,1492149988.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:28.169Z,1492149988.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:28.540Z,1492149988.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:28.585Z,1492149988.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:28.941Z,1492149988.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:28.969Z,1492149988.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:29.344Z,1492149989.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:29.377Z,1492149989.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:29.748Z,1492149989.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:29.783Z,1492149989.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:30.137Z,1492149990.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:30.161Z,1492149990.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:30.537Z,1492149990.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:30.586Z,1492149990.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:30.951Z,1492149990.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:30.967Z,1492149990.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:31.345Z,1492149991.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:31.361Z,1492149991.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:31.746Z,1492149991.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:31.766Z,1492149991.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:32.134Z,1492149992.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:32.165Z,1492149992.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:32.548Z,1492149992.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:32.581Z,1492149992.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:32.968Z,1492149992.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:32.984Z,1492149992.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:33.337Z,1492149993.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:33.369Z,1492149993.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:33.759Z,1492149993.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:33.775Z,1492149993.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:34.145Z,1492149994.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:34.172Z,1492149994.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:34.537Z,1492149994.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:34.574Z,1492149994.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:34.941Z,1492149994.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:34.974Z,1492149994.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:38.645Z,1492149998.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:38.786Z,1492149998.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:38.901Z,1492149998.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:38.927Z,1492149998.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:39.281Z,1492149999.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:39.358Z,1492149999.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:39.711Z,1492149999.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:39.726Z,1492149999.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:40.132Z,1492150000.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:40.198Z,1492150000.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:40.481Z,1492150000.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:40.518Z,1492150000.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:40.884Z,1492150000.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:40.958Z,1492150000.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:41.315Z,1492150001.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:41.331Z,1492150001.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:41.684Z,1492150001.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:41.768Z,1492150001.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:42.081Z,1492150002.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:42.122Z,1492150002.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:42.495Z,1492150002.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:42.523Z,1492150002.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:42.898Z,1492150002.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:42.924Z,1492150002.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:43.282Z,1492150003.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:43.325Z,1492150003.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:43.686Z,1492150003.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:43.727Z,1492150003.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:44.086Z,1492150004.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:44.123Z,1492150004.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:44.487Z,1492150004.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:44.525Z,1492150004.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:44.900Z,1492150004.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:44.916Z,1492150004.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:45.296Z,1492150005.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:45.328Z,1492150005.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:45.706Z,1492150005.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:45.722Z,1492150005.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:46.104Z,1492150006.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:46.120Z,1492150006.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:46.485Z,1492150006.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:46.513Z,1492150006.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:46.889Z,1492150006.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:46.924Z,1492150006.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:47.289Z,1492150007.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:47.329Z,1492150007.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:47.696Z,1492150007.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:47.721Z,1492150007.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:48.086Z,1492150008.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:48.121Z,1492150008.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:48.520Z,1492150008.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:48.536Z,1492150008.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:48.896Z,1492150008.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:48.930Z,1492150008.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:49.289Z,1492150009.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:49.329Z,1492150009.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:49.689Z,1492150009.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:49.723Z,1492150009.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:50.097Z,1492150010.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:50.128Z,1492150010.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:50.510Z,1492150010.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:50.538Z,1492150010.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:50.894Z,1492150010.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:50.910Z,1492150010.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:51.290Z,1492150011.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:51.308Z,1492150011.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:51.701Z,1492150011.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:51.722Z,1492150011.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:52.100Z,1492150012.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:52.119Z,1492150012.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:52.508Z,1492150012.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:52.524Z,1492150012.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:52.924Z,1492150012.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:53.045Z,1492150013.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:53.287Z,1492150013.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:53.346Z,1492150013.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:53.690Z,1492150013.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:53.731Z,1492150013.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:54.098Z,1492150014.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:54.150Z,1492150014.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:54.498Z,1492150014.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:54.522Z,1492150014.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:54.937Z,1492150014.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:55.022Z,1492150015.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:55.302Z,1492150015.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:55.347Z,1492150015.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:55.701Z,1492150015.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:55.717Z,1492150015.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:56.083Z,1492150016.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:56.137Z,1492150016.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:56.502Z,1492150016.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:56.548Z,1492150016.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:56.924Z,1492150016.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:56.973Z,1492150016.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:57.281Z,1492150017.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:57.311Z,1492150017.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:57.682Z,1492150017.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:57.726Z,1492150017.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:58.084Z,1492150018.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:58.128Z,1492150018.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:58.486Z,1492150018.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:58.567Z,1492150018.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:58.887Z,1492150018.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:58.924Z,1492150018.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:59.278Z,1492150019.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:59.298Z,1492150019.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:06:59.697Z,1492150019.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:06:59.726Z,1492150019.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:00.086Z,1492150020.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:00.105Z,1492150020.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:00.486Z,1492150020.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:00.507Z,1492150020.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:00.889Z,1492150020.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:00.914Z,1492150020.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:01.299Z,1492150021.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:01.316Z,1492150021.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:01.679Z,1492150021.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:01.710Z,1492150021.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:02.093Z,1492150022.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:02.117Z,1492150022.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:02.481Z,1492150022.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:02.526Z,1492150022.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:02.889Z,1492150022.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:02.929Z,1492150022.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:03.289Z,1492150023.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:03.360Z,1492150023.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:03.684Z,1492150023.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:03.738Z,1492150023.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:04.088Z,1492150024.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:04.106Z,1492150024.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:04.497Z,1492150024.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:04.512Z,1492150024.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:04.883Z,1492150024.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:04.919Z,1492150024.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:05.293Z,1492150025.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:05.338Z,1492150025.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:05.701Z,1492150025.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:05.717Z,1492150025.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:06.094Z,1492150026.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:06.114Z,1492150026.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:06.489Z,1492150026.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:06.515Z,1492150026.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:06.887Z,1492150026.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:06.947Z,1492150026.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:07.291Z,1492150027.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:07.389Z,1492150027.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:07.701Z,1492150027.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:07.796Z,1492150027.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:08.093Z,1492150028.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:08.114Z,1492150028.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:08.500Z,1492150028.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:08.550Z,1492150028.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:08.894Z,1492150028.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:08.918Z,1492150028.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:09.306Z,1492150029.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:09.354Z,1492150029.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:09.688Z,1492150029.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:09.770Z,1492150029.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:10.081Z,1492150030.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:10.126Z,1492150030.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:10.481Z,1492150030.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:10.518Z,1492150030.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:10.901Z,1492150030.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:10.925Z,1492150030.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:11.283Z,1492150031.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:11.347Z,1492150031.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:11.691Z,1492150031.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:11.745Z,1492150031.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:12.089Z,1492150032.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:12.106Z,1492150032.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:12.486Z,1492150032.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:12.512Z,1492150032.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:12.887Z,1492150032.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:12.926Z,1492150032.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:13.337Z,1492150033.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:13.357Z,1492150033.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:13.678Z,1492150033.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:13.715Z,1492150033.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:14.081Z,1492150034.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:14.116Z,1492150034.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:14.478Z,1492150034.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:14.525Z,1492150034.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:14.881Z,1492150034.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:15.006Z,1492150035.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:15.314Z,1492150035.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:15.342Z,1492150035.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:15.681Z,1492150035.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:15.717Z,1492150035.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:16.082Z,1492150036.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:16.123Z,1492150036.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:16.482Z,1492150036.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:16.518Z,1492150036.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:16.900Z,1492150036.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:16.922Z,1492150036.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:17.285Z,1492150037.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:17.322Z,1492150037.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:17.685Z,1492150037.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:17.722Z,1492150037.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:18.081Z,1492150038.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:18.114Z,1492150038.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:18.504Z,1492150038.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:18.520Z,1492150038.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:18.891Z,1492150038.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:18.929Z,1492150038.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:19.285Z,1492150039.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:19.314Z,1492150039.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:19.685Z,1492150039.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:19.714Z,1492150039.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:20.081Z,1492150040.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:20.117Z,1492150040.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:20.481Z,1492150040.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:20.520Z,1492150040.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:20.905Z,1492150040.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:20.921Z,1492150040.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:21.289Z,1492150041.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:21.326Z,1492150041.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:21.681Z,1492150041.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:21.742Z,1492150041.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:22.075Z,1492150042.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:22.122Z,1492150042.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:22.495Z,1492150042.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:22.511Z,1492150042.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:22.890Z,1492150042.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:22.907Z,1492150042.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:23.289Z,1492150043.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:23.349Z,1492150043.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:23.689Z,1492150043.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:23.714Z,1492150043.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:23.896Z,1492150043.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:24.089Z,1492150044.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:24.143Z,1492150044.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:24.490Z,1492150044.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:24.546Z,1492150044.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:24.692Z,1492150044.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:24.894Z,1492150044.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:24.910Z,1492150044.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:25.096Z,1492150045.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:25.289Z,1492150045.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:25.306Z,1492150045.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:25.681Z,1492150045.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:25.721Z,1492150045.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:26.126Z,1492150046.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:26.158Z,1492150046.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:26.481Z,1492150046.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:26.536Z,1492150046.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:26.881Z,1492150046.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:26.922Z,1492150046.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:27.283Z,1492150047.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:27.315Z,1492150047.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:27.685Z,1492150047.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:27.726Z,1492150047.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:27.888Z,1492150047.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:28.079Z,1492150048.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:28.097Z,1492150048.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:28.489Z,1492150048.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:28.507Z,1492150048.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:28.685Z,1492150048.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:28.889Z,1492150048.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:28.929Z,1492150048.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:29.092Z,1492150049.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:29.287Z,1492150049.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:29.314Z,1492150049.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:29.727Z,1492150049.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:29.759Z,1492150049.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:29.888Z,1492150049.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:30.096Z,1492150050.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:30.111Z,1492150050.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:30.481Z,1492150050.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:30.522Z,1492150050.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:30.684Z,1492150050.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:30.910Z,1492150050.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:30.926Z,1492150050.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:31.089Z,1492150051.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:31.282Z,1492150051.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:31.373Z,1492150051.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:31.686Z,1492150051.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:31.722Z,1492150051.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:32.086Z,1492150052.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:32.117Z,1492150052.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:32.481Z,1492150052.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:32.520Z,1492150052.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:32.886Z,1492150052.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:32.927Z,1492150052.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:33.283Z,1492150053.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:33.321Z,1492150053.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:33.686Z,1492150053.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:33.718Z,1492150053.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:34.081Z,1492150054.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:34.101Z,1492150054.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:34.126Z,1492150054.126 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:07:34.126Z,1492150054.126 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:07:34.126Z,1492150054.126 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:07:34.126Z,1492150054.126 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:07:34.500Z,1492150054.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:34.528Z,1492150054.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:34.538Z,1492150054.538 [Default:CheckIn:D] Stopped
2017-04-14T06:07:34.538Z,1492150054.538 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:07:34.885Z,1492150054.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:34.904Z,1492150054.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:34.944Z,1492150054.944 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 161.486979 min 
2017-04-14T06:07:34.945Z,1492150054.944 [Default:CheckIn:E] Stopped
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn] Stopped
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn](INFO): Running loop #24
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn] Running Loop=24
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:07:34.945Z,1492150054.945 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:07:35.293Z,1492150055.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:35.310Z,1492150055.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:35.876Z,1492150055.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:36.672Z,1492150056.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:37.076Z,1492150057.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:37.872Z,1492150057.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:38.669Z,1492150058.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:38.855Z,1492150058.855 [NAL9602](INFO): Powering up
2017-04-14T06:07:38.882Z,1492150058.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:38.918Z,1492150058.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:39.042Z,1492150059.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:39.074Z,1492150059.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:39.076Z,1492150059.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:39.429Z,1492150059.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:39.462Z,1492150059.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:39.829Z,1492150059.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:39.837Z,1492150059.837 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:07:39.837Z,1492150059.837 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:07:39.837Z,1492150059.837 [BPC1](ERROR): Communications Fault
2017-04-14T06:07:39.872Z,1492150059.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:39.876Z,1492150059.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:39.907Z,1492150059.907 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:07:40.222Z,1492150060.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:40.238Z,1492150060.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:40.669Z,1492150060.669 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:40.702Z,1492150060.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:40.754Z,1492150060.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:41.033Z,1492150061.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:41.048Z,1492150061.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:41.080Z,1492150061.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:41.091Z,1492150061.091 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:07:41.091Z,1492150061.091 [BPC1] No Fault, FailCount= 1
2017-04-14T06:07:41.433Z,1492150061.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:41.506Z,1492150061.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:41.832Z,1492150061.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:41.853Z,1492150061.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:41.876Z,1492150061.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:42.233Z,1492150062.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:42.290Z,1492150062.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:42.675Z,1492150062.675 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:42.690Z,1492150062.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:42.730Z,1492150062.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:43.034Z,1492150063.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:43.054Z,1492150063.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:43.080Z,1492150063.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:43.436Z,1492150063.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:43.452Z,1492150063.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:43.833Z,1492150063.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:43.849Z,1492150063.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:43.876Z,1492150063.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:44.242Z,1492150064.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:44.307Z,1492150064.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:44.623Z,1492150064.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:44.658Z,1492150064.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:44.673Z,1492150064.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:45.026Z,1492150065.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:45.060Z,1492150065.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:45.076Z,1492150065.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:45.434Z,1492150065.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:45.464Z,1492150065.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:45.831Z,1492150065.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:45.859Z,1492150065.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:46.219Z,1492150066.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:46.243Z,1492150066.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:46.625Z,1492150066.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:46.662Z,1492150066.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:47.029Z,1492150067.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:47.056Z,1492150067.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:47.425Z,1492150067.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:47.461Z,1492150067.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:47.829Z,1492150067.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:47.870Z,1492150067.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:48.228Z,1492150068.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:48.298Z,1492150068.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:48.634Z,1492150068.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:48.650Z,1492150068.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:49.028Z,1492150069.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:49.058Z,1492150069.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:49.448Z,1492150069.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:49.464Z,1492150069.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:49.809Z,1492150069.809 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:07:49.826Z,1492150069.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:49.870Z,1492150069.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:50.230Z,1492150070.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:50.329Z,1492150070.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:50.650Z,1492150070.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:50.669Z,1492150070.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:51.048Z,1492150071.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:51.073Z,1492150071.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:51.453Z,1492150071.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:51.474Z,1492150071.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:51.831Z,1492150071.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:51.858Z,1492150071.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:52.234Z,1492150072.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:52.272Z,1492150072.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:52.641Z,1492150072.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:52.685Z,1492150072.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:53.041Z,1492150073.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:53.056Z,1492150073.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:53.440Z,1492150073.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:53.457Z,1492150073.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:53.841Z,1492150073.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:53.858Z,1492150073.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:54.234Z,1492150074.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:54.307Z,1492150074.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:54.688Z,1492150074.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:54.725Z,1492150074.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:55.029Z,1492150075.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:55.078Z,1492150075.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:55.425Z,1492150075.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:55.470Z,1492150075.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:55.825Z,1492150075.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:55.882Z,1492150075.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:56.226Z,1492150076.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:56.276Z,1492150076.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:56.679Z,1492150076.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:56.732Z,1492150076.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:57.052Z,1492150077.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:57.083Z,1492150077.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:57.447Z,1492150077.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:57.475Z,1492150077.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:57.837Z,1492150077.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:57.853Z,1492150077.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:58.226Z,1492150078.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:58.324Z,1492150078.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:58.633Z,1492150078.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:58.658Z,1492150078.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:59.025Z,1492150079.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:59.053Z,1492150079.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:59.425Z,1492150079.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:59.452Z,1492150079.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:07:59.825Z,1492150079.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:07:59.862Z,1492150079.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:00.350Z,1492150080.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:00.437Z,1492150080.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:00.628Z,1492150080.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:00.659Z,1492150080.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:01.031Z,1492150081.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:01.072Z,1492150081.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:01.450Z,1492150081.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:01.504Z,1492150081.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:01.848Z,1492150081.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:01.864Z,1492150081.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:02.264Z,1492150082.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:02.337Z,1492150082.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:02.631Z,1492150082.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:02.708Z,1492150082.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:03.040Z,1492150083.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:03.062Z,1492150083.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:03.439Z,1492150083.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:03.462Z,1492150083.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:03.834Z,1492150083.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:03.850Z,1492150083.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:04.282Z,1492150084.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:04.327Z,1492150084.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:04.628Z,1492150084.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:04.666Z,1492150084.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:05.025Z,1492150085.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:05.058Z,1492150085.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:05.439Z,1492150085.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:05.454Z,1492150085.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:05.854Z,1492150085.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:05.906Z,1492150085.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:06.234Z,1492150086.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:06.249Z,1492150086.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:06.627Z,1492150086.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:06.676Z,1492150086.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:07.027Z,1492150087.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:07.080Z,1492150087.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:07.442Z,1492150087.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:07.472Z,1492150087.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:07.834Z,1492150087.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:07.851Z,1492150087.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:08.230Z,1492150088.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:08.323Z,1492150088.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:08.673Z,1492150088.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:08.697Z,1492150088.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:09.025Z,1492150089.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:09.093Z,1492150089.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:09.425Z,1492150089.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:09.488Z,1492150089.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:09.829Z,1492150089.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:09.869Z,1492150089.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:10.224Z,1492150090.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:10.278Z,1492150090.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:10.674Z,1492150090.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:10.731Z,1492150090.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:11.031Z,1492150091.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:11.071Z,1492150091.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:11.429Z,1492150091.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:11.476Z,1492150091.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:11.840Z,1492150091.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:11.872Z,1492150091.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:12.292Z,1492150092.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:12.322Z,1492150092.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:12.630Z,1492150092.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:12.665Z,1492150092.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:13.032Z,1492150093.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:13.050Z,1492150093.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:13.435Z,1492150093.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:13.451Z,1492150093.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:13.834Z,1492150093.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:13.857Z,1492150093.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:14.261Z,1492150094.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:14.305Z,1492150094.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:14.625Z,1492150094.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:14.690Z,1492150094.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:14.713Z,1492150094.713 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:14.713Z,1492150094.713 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:08:14.713Z,1492150094.713 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:08:14.752Z,1492150094.752 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:08:15.031Z,1492150095.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:15.068Z,1492150095.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:15.088Z,1492150095.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:08:15.088Z,1492150095.088 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:08:15.437Z,1492150095.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:15.474Z,1492150095.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:15.479Z,1492150095.480 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:08:15.480Z,1492150095.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:08:15.480Z,1492150095.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:08:15.847Z,1492150095.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:15.878Z,1492150095.878 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:15.878Z,1492150095.878 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:08:15.878Z,1492150095.878 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:08:15.885Z,1492150095.885 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:15.885Z,1492150095.885 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:08:15.885Z,1492150095.885 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:08:15.900Z,1492150095.900 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:08:15.900Z,1492150095.900 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:08:16.275Z,1492150096.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:16.372Z,1492150096.372 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:08:16.373Z,1492150096.372 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:08:16.373Z,1492150096.373 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:08:16.373Z,1492150096.373 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:08:16.628Z,1492150096.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:16.643Z,1492150096.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:08:16.659Z,1492150096.659 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:08:16.660Z,1492150096.660 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:08:16.669Z,1492150096.669 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:08:16.669Z,1492150096.669 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:08:16.669Z,1492150096.670 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:08:17.039Z,1492150097.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:17.068Z,1492150097.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:17.431Z,1492150097.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:17.455Z,1492150097.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:17.839Z,1492150097.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:17.871Z,1492150097.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:18.297Z,1492150098.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:18.361Z,1492150098.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:18.650Z,1492150098.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:18.687Z,1492150098.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:19.041Z,1492150099.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:19.057Z,1492150099.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:19.462Z,1492150099.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:19.512Z,1492150099.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:19.830Z,1492150099.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:19.882Z,1492150099.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:20.249Z,1492150100.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:20.363Z,1492150100.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:20.658Z,1492150100.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:20.709Z,1492150100.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:21.035Z,1492150101.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:21.069Z,1492150101.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:21.426Z,1492150101.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:21.463Z,1492150101.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:21.834Z,1492150101.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:21.873Z,1492150101.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:22.239Z,1492150102.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:22.268Z,1492150102.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:22.671Z,1492150102.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:22.786Z,1492150102.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:23.034Z,1492150103.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:23.071Z,1492150103.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:23.437Z,1492150103.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:23.489Z,1492150103.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:23.837Z,1492150103.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:23.877Z,1492150103.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:24.234Z,1492150104.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:24.290Z,1492150104.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:24.653Z,1492150104.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:24.678Z,1492150104.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:25.038Z,1492150105.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:25.097Z,1492150105.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:25.442Z,1492150105.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:25.491Z,1492150105.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:25.830Z,1492150105.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:25.861Z,1492150105.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:26.344Z,1492150106.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:26.395Z,1492150106.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:26.688Z,1492150106.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:26.743Z,1492150106.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:27.040Z,1492150107.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:27.058Z,1492150107.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:27.460Z,1492150107.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:27.517Z,1492150107.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:27.835Z,1492150107.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:27.892Z,1492150107.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:28.285Z,1492150108.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:28.351Z,1492150108.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:28.627Z,1492150108.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:28.686Z,1492150108.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:29.050Z,1492150109.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:29.066Z,1492150109.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:29.441Z,1492150109.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:29.457Z,1492150109.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:29.830Z,1492150109.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:29.868Z,1492150109.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:30.325Z,1492150110.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:30.358Z,1492150110.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:30.630Z,1492150110.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:30.681Z,1492150110.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:31.047Z,1492150111.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:31.075Z,1492150111.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:31.436Z,1492150111.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:31.452Z,1492150111.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:31.835Z,1492150111.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:31.869Z,1492150111.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:32.270Z,1492150112.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:32.314Z,1492150112.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:32.633Z,1492150112.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:32.673Z,1492150112.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:33.034Z,1492150113.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:33.064Z,1492150113.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:33.425Z,1492150113.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:33.462Z,1492150113.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:33.826Z,1492150113.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:33.865Z,1492150113.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:34.251Z,1492150114.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:34.343Z,1492150114.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:34.638Z,1492150114.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:34.686Z,1492150114.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:35.036Z,1492150115.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:35.052Z,1492150115.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:35.458Z,1492150115.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:35.511Z,1492150115.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:39.762Z,1492150119.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:39.831Z,1492150119.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:39.952Z,1492150119.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:39.986Z,1492150119.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:40.301Z,1492150120.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:40.344Z,1492150120.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:40.723Z,1492150120.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:40.781Z,1492150120.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:41.117Z,1492150121.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:41.134Z,1492150121.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:41.517Z,1492150121.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:41.577Z,1492150121.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:41.902Z,1492150121.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:41.969Z,1492150121.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:42.306Z,1492150122.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:42.333Z,1492150122.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:42.721Z,1492150122.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:42.738Z,1492150122.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:43.105Z,1492150123.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:43.140Z,1492150123.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:43.516Z,1492150123.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:43.538Z,1492150123.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:43.917Z,1492150123.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:43.934Z,1492150123.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:44.323Z,1492150124.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:44.339Z,1492150124.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:44.705Z,1492150124.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:44.732Z,1492150124.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:45.106Z,1492150125.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:45.141Z,1492150125.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:45.505Z,1492150125.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:45.532Z,1492150125.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:45.909Z,1492150125.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:45.936Z,1492150125.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:46.301Z,1492150126.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:46.337Z,1492150126.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:46.710Z,1492150126.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:46.737Z,1492150126.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:47.109Z,1492150127.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:47.146Z,1492150127.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:47.490Z,1492150127.490 [NAL9602](INFO): SBD MO Status=2, MOMSN=2117, MT Status=2, MTMSN=0
2017-04-14T06:08:47.490Z,1492150127.490 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:08:47.507Z,1492150127.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:47.544Z,1492150127.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:47.928Z,1492150127.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:47.944Z,1492150127.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:48.337Z,1492150128.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:48.363Z,1492150128.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:48.707Z,1492150128.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:48.735Z,1492150128.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:49.109Z,1492150129.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:49.137Z,1492150129.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:49.506Z,1492150129.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:49.534Z,1492150129.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:49.922Z,1492150129.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:49.939Z,1492150129.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:50.322Z,1492150130.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:50.340Z,1492150130.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:50.705Z,1492150130.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:50.738Z,1492150130.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:51.109Z,1492150131.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:51.136Z,1492150131.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:51.526Z,1492150131.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:51.546Z,1492150131.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:51.932Z,1492150131.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:51.948Z,1492150131.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:52.309Z,1492150132.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:52.342Z,1492150132.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:52.702Z,1492150132.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:52.742Z,1492150132.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:53.112Z,1492150133.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:53.148Z,1492150133.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:53.509Z,1492150133.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:53.530Z,1492150133.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:53.908Z,1492150133.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:53.965Z,1492150133.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:54.310Z,1492150134.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:54.365Z,1492150134.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:54.728Z,1492150134.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:54.762Z,1492150134.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:55.127Z,1492150135.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:55.159Z,1492150135.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:55.510Z,1492150135.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:55.566Z,1492150135.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:55.911Z,1492150135.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:55.927Z,1492150135.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:56.314Z,1492150136.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:56.359Z,1492150136.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:56.715Z,1492150136.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:56.772Z,1492150136.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:57.115Z,1492150137.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:57.131Z,1492150137.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:57.511Z,1492150137.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:57.526Z,1492150137.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:57.912Z,1492150137.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:57.928Z,1492150137.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:58.314Z,1492150138.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:58.329Z,1492150138.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:58.704Z,1492150138.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:58.737Z,1492150138.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:59.101Z,1492150139.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:59.139Z,1492150139.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:59.509Z,1492150139.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:59.542Z,1492150139.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:08:59.901Z,1492150139.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:08:59.934Z,1492150139.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:00.301Z,1492150140.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:00.334Z,1492150140.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:00.701Z,1492150140.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:00.733Z,1492150140.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:01.106Z,1492150141.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:01.145Z,1492150141.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:01.499Z,1492150141.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:01.523Z,1492150141.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:01.901Z,1492150141.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:01.938Z,1492150141.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:02.302Z,1492150142.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:02.342Z,1492150142.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:02.707Z,1492150142.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:02.738Z,1492150142.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:03.105Z,1492150143.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:03.133Z,1492150143.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:03.501Z,1492150143.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:03.517Z,1492150143.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:03.920Z,1492150143.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:03.946Z,1492150143.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:04.324Z,1492150144.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:04.358Z,1492150144.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:04.712Z,1492150144.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:04.729Z,1492150144.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:05.117Z,1492150145.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:05.156Z,1492150145.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:05.506Z,1492150145.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:05.538Z,1492150145.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:05.916Z,1492150145.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:05.961Z,1492150145.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:06.328Z,1492150146.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:06.370Z,1492150146.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:06.703Z,1492150146.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:06.744Z,1492150146.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:07.112Z,1492150147.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:07.161Z,1492150147.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:07.520Z,1492150147.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:07.549Z,1492150147.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:07.927Z,1492150147.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:07.942Z,1492150147.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:08.347Z,1492150148.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:08.400Z,1492150148.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:08.724Z,1492150148.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:08.802Z,1492150148.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:09.116Z,1492150149.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:09.132Z,1492150149.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:09.515Z,1492150149.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:09.530Z,1492150149.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:09.916Z,1492150149.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:09.932Z,1492150149.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:10.311Z,1492150150.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:10.327Z,1492150150.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:10.720Z,1492150150.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:10.736Z,1492150150.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:11.101Z,1492150151.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:11.137Z,1492150151.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:11.501Z,1492150151.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:11.538Z,1492150151.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:11.905Z,1492150151.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:11.913Z,1492150151.913 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:09:11.913Z,1492150151.913 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:09:11.913Z,1492150151.913 [BPC1](ERROR): Communications Fault
2017-04-14T06:09:11.948Z,1492150151.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:11.991Z,1492150151.991 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:09:12.339Z,1492150152.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:12.355Z,1492150152.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:12.720Z,1492150152.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:12.747Z,1492150152.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:13.117Z,1492150153.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:13.149Z,1492150153.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:13.167Z,1492150153.167 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:09:13.167Z,1492150153.167 [BPC1] No Fault, FailCount= 1
2017-04-14T06:09:13.509Z,1492150153.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:13.594Z,1492150153.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:13.909Z,1492150153.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:13.949Z,1492150153.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:14.317Z,1492150154.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:14.349Z,1492150154.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:14.709Z,1492150154.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:14.726Z,1492150154.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:15.110Z,1492150155.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:15.130Z,1492150155.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:15.506Z,1492150155.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:15.540Z,1492150155.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:15.910Z,1492150155.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:15.939Z,1492150155.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:16.309Z,1492150156.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:16.330Z,1492150156.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:16.723Z,1492150156.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:16.771Z,1492150156.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:17.112Z,1492150157.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:17.128Z,1492150157.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:17.508Z,1492150157.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:17.528Z,1492150157.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:17.913Z,1492150157.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:17.928Z,1492150157.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:18.315Z,1492150158.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:18.331Z,1492150158.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:18.709Z,1492150158.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:18.725Z,1492150158.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:19.110Z,1492150159.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:19.125Z,1492150159.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:19.514Z,1492150159.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:19.530Z,1492150159.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:19.917Z,1492150159.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:19.933Z,1492150159.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:20.311Z,1492150160.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:20.326Z,1492150160.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:20.711Z,1492150160.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:20.727Z,1492150160.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:21.117Z,1492150161.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:21.133Z,1492150161.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:21.519Z,1492150161.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:21.550Z,1492150161.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:21.910Z,1492150161.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:21.950Z,1492150161.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:22.310Z,1492150162.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:22.325Z,1492150162.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:22.715Z,1492150162.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:22.730Z,1492150162.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:23.110Z,1492150163.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:23.126Z,1492150163.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:23.518Z,1492150163.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:23.534Z,1492150163.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:23.910Z,1492150163.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:23.934Z,1492150163.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:24.311Z,1492150164.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:24.327Z,1492150164.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:24.701Z,1492150164.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:24.730Z,1492150164.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:25.130Z,1492150165.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:25.146Z,1492150165.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:25.521Z,1492150165.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:25.537Z,1492150165.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:25.901Z,1492150165.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:25.933Z,1492150165.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:26.301Z,1492150166.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:26.340Z,1492150166.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:26.705Z,1492150166.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:26.742Z,1492150166.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:27.101Z,1492150167.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:27.143Z,1492150167.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:27.505Z,1492150167.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:27.545Z,1492150167.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:27.905Z,1492150167.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:27.942Z,1492150167.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:28.301Z,1492150168.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:28.343Z,1492150168.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:28.706Z,1492150168.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:28.738Z,1492150168.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:29.105Z,1492150169.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:29.142Z,1492150169.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:29.520Z,1492150169.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:29.547Z,1492150169.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:29.909Z,1492150169.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:29.950Z,1492150169.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:30.305Z,1492150170.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:30.326Z,1492150170.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:30.710Z,1492150170.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:30.750Z,1492150170.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:31.117Z,1492150171.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:31.158Z,1492150171.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:31.500Z,1492150171.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:31.528Z,1492150171.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:31.910Z,1492150171.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:31.918Z,1492150171.918 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:09:31.918Z,1492150171.918 [BPC1] Communications Fault, FailCount= 2
2017-04-14T06:09:31.918Z,1492150171.918 [BPC1](ERROR): Communications Fault
2017-04-14T06:09:31.927Z,1492150171.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:31.990Z,1492150171.990 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:09:32.308Z,1492150172.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:32.330Z,1492150172.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:32.711Z,1492150172.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:32.726Z,1492150172.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:33.117Z,1492150173.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:33.132Z,1492150173.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:33.175Z,1492150173.175 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:09:33.175Z,1492150173.175 [BPC1] No Fault, FailCount= 2
2017-04-14T06:09:33.508Z,1492150173.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:33.574Z,1492150173.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:33.914Z,1492150173.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:33.973Z,1492150173.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:34.308Z,1492150174.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:34.334Z,1492150174.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:34.711Z,1492150174.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:34.727Z,1492150174.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:35.108Z,1492150175.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:35.137Z,1492150175.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:35.501Z,1492150175.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:35.527Z,1492150175.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:39.218Z,1492150179.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:39.234Z,1492150179.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:39.338Z,1492150179.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:39.376Z,1492150179.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:39.691Z,1492150179.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:39.718Z,1492150179.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:40.169Z,1492150180.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:40.219Z,1492150180.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:40.522Z,1492150180.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:40.569Z,1492150180.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:40.898Z,1492150180.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:40.914Z,1492150180.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:41.316Z,1492150181.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:41.331Z,1492150181.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:41.704Z,1492150181.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:41.746Z,1492150181.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:42.137Z,1492150182.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:42.198Z,1492150182.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:42.507Z,1492150182.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:42.532Z,1492150182.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:42.896Z,1492150182.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:42.914Z,1492150182.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:43.305Z,1492150183.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:43.321Z,1492150183.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:43.694Z,1492150183.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:43.729Z,1492150183.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:44.102Z,1492150184.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:44.118Z,1492150184.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:44.485Z,1492150184.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:44.542Z,1492150184.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:44.885Z,1492150184.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:44.966Z,1492150184.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:45.287Z,1492150185.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:45.317Z,1492150185.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:45.678Z,1492150185.678 [NAL9602](INFO): SBD MO Status=2, MOMSN=2117, MT Status=2, MTMSN=0
2017-04-14T06:09:45.678Z,1492150185.678 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:09:45.697Z,1492150185.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:45.746Z,1492150185.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:46.109Z,1492150186.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:46.158Z,1492150186.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:46.520Z,1492150186.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:46.560Z,1492150186.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:46.901Z,1492150186.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:46.962Z,1492150186.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:47.296Z,1492150187.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:47.346Z,1492150187.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:47.696Z,1492150187.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:47.714Z,1492150187.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:48.099Z,1492150188.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:48.115Z,1492150188.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:48.520Z,1492150188.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:48.554Z,1492150188.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:48.885Z,1492150188.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:48.921Z,1492150188.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:49.299Z,1492150189.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:49.322Z,1492150189.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:49.685Z,1492150189.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:49.716Z,1492150189.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:50.182Z,1492150190.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:50.212Z,1492150190.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:50.515Z,1492150190.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:50.557Z,1492150190.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:50.885Z,1492150190.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:50.933Z,1492150190.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:51.285Z,1492150191.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:51.321Z,1492150191.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:51.689Z,1492150191.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:51.722Z,1492150191.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:52.170Z,1492150192.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:52.189Z,1492150192.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:52.479Z,1492150192.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:52.512Z,1492150192.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:52.914Z,1492150192.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:52.929Z,1492150192.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:53.289Z,1492150193.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:53.364Z,1492150193.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:53.697Z,1492150193.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:53.738Z,1492150193.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:54.156Z,1492150194.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:54.192Z,1492150194.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:54.516Z,1492150194.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:54.538Z,1492150194.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:54.908Z,1492150194.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:54.924Z,1492150194.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:55.285Z,1492150195.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:55.326Z,1492150195.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:55.700Z,1492150195.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:55.730Z,1492150195.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:56.151Z,1492150196.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:56.193Z,1492150196.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:56.493Z,1492150196.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:56.537Z,1492150196.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:56.889Z,1492150196.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:56.935Z,1492150196.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:57.320Z,1492150197.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:57.358Z,1492150197.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:57.690Z,1492150197.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:57.750Z,1492150197.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:58.132Z,1492150198.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:58.234Z,1492150198.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:58.483Z,1492150198.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:58.526Z,1492150198.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:58.920Z,1492150198.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:58.993Z,1492150198.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:59.289Z,1492150199.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:59.335Z,1492150199.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:09:59.697Z,1492150199.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:09:59.786Z,1492150199.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:00.089Z,1492150200.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:00.170Z,1492150200.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:00.495Z,1492150200.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:00.543Z,1492150200.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:00.890Z,1492150200.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:00.928Z,1492150200.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:01.298Z,1492150201.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:01.314Z,1492150201.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:01.697Z,1492150201.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:01.722Z,1492150201.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:02.096Z,1492150202.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:02.120Z,1492150202.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:02.474Z,1492150202.474 [NAL9602](INFO): SBD MO Status=2, MOMSN=2117, MT Status=2, MTMSN=0
2017-04-14T06:10:02.474Z,1492150202.474 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:10:02.531Z,1492150202.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:02.579Z,1492150202.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:02.934Z,1492150202.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:02.974Z,1492150202.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:03.297Z,1492150203.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:03.318Z,1492150203.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:03.708Z,1492150203.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:03.751Z,1492150203.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:04.149Z,1492150204.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:04.192Z,1492150204.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:04.498Z,1492150204.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:04.525Z,1492150204.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:04.905Z,1492150204.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:04.921Z,1492150204.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:05.287Z,1492150205.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:05.342Z,1492150205.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:05.737Z,1492150205.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:05.796Z,1492150205.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:06.132Z,1492150206.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:06.179Z,1492150206.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:06.486Z,1492150206.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:06.527Z,1492150206.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:06.915Z,1492150206.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:07.012Z,1492150207.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:07.307Z,1492150207.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:07.348Z,1492150207.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:07.690Z,1492150207.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:07.750Z,1492150207.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:08.159Z,1492150208.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:08.221Z,1492150208.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:08.502Z,1492150208.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:08.549Z,1492150208.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:08.906Z,1492150208.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:08.931Z,1492150208.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:09.298Z,1492150209.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:09.335Z,1492150209.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:09.709Z,1492150209.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:09.725Z,1492150209.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:10.180Z,1492150210.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:10.230Z,1492150210.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:10.526Z,1492150210.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:10.562Z,1492150210.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:10.910Z,1492150210.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:10.997Z,1492150210.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:11.285Z,1492150211.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:11.326Z,1492150211.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:11.689Z,1492150211.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:11.726Z,1492150211.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:12.156Z,1492150212.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:12.238Z,1492150212.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:12.490Z,1492150212.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:12.545Z,1492150212.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:12.896Z,1492150212.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:12.951Z,1492150212.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:13.326Z,1492150213.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:13.378Z,1492150213.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:13.708Z,1492150213.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:13.724Z,1492150213.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:14.146Z,1492150214.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:14.172Z,1492150214.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:14.485Z,1492150214.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:14.579Z,1492150214.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:14.917Z,1492150214.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:14.947Z,1492150214.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:15.317Z,1492150215.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:15.349Z,1492150215.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:15.707Z,1492150215.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:15.747Z,1492150215.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:16.127Z,1492150216.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:16.182Z,1492150216.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:16.502Z,1492150216.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:16.521Z,1492150216.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:16.927Z,1492150216.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:16.970Z,1492150216.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:17.309Z,1492150217.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:17.342Z,1492150217.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:17.686Z,1492150217.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:17.724Z,1492150217.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:18.141Z,1492150218.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:18.178Z,1492150218.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:18.513Z,1492150218.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:18.551Z,1492150218.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:18.913Z,1492150218.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:18.938Z,1492150218.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:19.295Z,1492150219.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:19.329Z,1492150219.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:19.697Z,1492150219.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:19.734Z,1492150219.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:20.133Z,1492150220.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:20.182Z,1492150220.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:20.497Z,1492150220.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:20.546Z,1492150220.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:20.897Z,1492150220.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:20.913Z,1492150220.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:21.294Z,1492150221.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:21.316Z,1492150221.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:21.708Z,1492150221.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:21.753Z,1492150221.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:22.124Z,1492150222.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:22.176Z,1492150222.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:22.504Z,1492150222.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:22.553Z,1492150222.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:22.914Z,1492150222.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:22.930Z,1492150222.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:23.312Z,1492150223.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:23.335Z,1492150223.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:23.685Z,1492150223.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:23.754Z,1492150223.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:24.136Z,1492150224.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:24.201Z,1492150224.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:24.495Z,1492150224.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:24.533Z,1492150224.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:24.895Z,1492150224.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:24.941Z,1492150224.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:25.291Z,1492150225.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:25.344Z,1492150225.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:25.696Z,1492150225.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:25.711Z,1492150225.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:26.177Z,1492150226.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:26.253Z,1492150226.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:26.504Z,1492150226.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:26.558Z,1492150226.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:26.922Z,1492150226.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:26.963Z,1492150226.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:27.337Z,1492150227.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:27.375Z,1492150227.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:27.705Z,1492150227.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:27.747Z,1492150227.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:28.099Z,1492150228.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:28.145Z,1492150228.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:28.497Z,1492150228.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:28.542Z,1492150228.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:28.898Z,1492150228.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:28.914Z,1492150228.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:29.297Z,1492150229.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:29.313Z,1492150229.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:29.694Z,1492150229.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:29.710Z,1492150229.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:30.115Z,1492150230.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:30.144Z,1492150230.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:30.507Z,1492150230.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:30.549Z,1492150230.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:30.920Z,1492150230.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:30.972Z,1492150230.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:31.308Z,1492150231.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:31.350Z,1492150231.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:31.722Z,1492150231.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:31.729Z,1492150231.729 [PNI_TCM](ERROR): CRC does not match. Expected:0x39106 got:0x1857
2017-04-14T06:10:31.756Z,1492150231.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:32.116Z,1492150232.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:32.168Z,1492150232.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:32.487Z,1492150232.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:32.546Z,1492150232.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:32.901Z,1492150232.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:32.950Z,1492150232.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:33.289Z,1492150233.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:33.340Z,1492150233.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:33.687Z,1492150233.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:33.730Z,1492150233.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:34.100Z,1492150234.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:34.146Z,1492150234.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:34.503Z,1492150234.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:34.538Z,1492150234.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:34.904Z,1492150234.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:34.932Z,1492150234.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:35.310Z,1492150235.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:35.370Z,1492150235.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:35.719Z,1492150235.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:35.735Z,1492150235.735 [PNI_TCM](ERROR): CRC does not match. Expected:0x39556 got:0x54509
2017-04-14T06:10:35.776Z,1492150235.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:39.224Z,1492150239.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:39.317Z,1492150239.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:39.442Z,1492150239.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:39.458Z,1492150239.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:39.816Z,1492150239.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:39.847Z,1492150239.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:40.202Z,1492150240.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:40.257Z,1492150240.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:40.604Z,1492150240.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:40.619Z,1492150240.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:41.002Z,1492150241.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:41.054Z,1492150241.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:41.410Z,1492150241.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:41.465Z,1492150241.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:41.802Z,1492150241.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:41.822Z,1492150241.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:42.200Z,1492150242.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:42.216Z,1492150242.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:42.611Z,1492150242.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:42.635Z,1492150242.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:43.007Z,1492150243.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:43.023Z,1492150243.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:43.406Z,1492150243.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:43.421Z,1492150243.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:43.812Z,1492150243.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:43.838Z,1492150243.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:44.212Z,1492150244.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:44.233Z,1492150244.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:44.626Z,1492150244.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:44.642Z,1492150244.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:44.994Z,1492150244.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:45.038Z,1492150245.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:45.397Z,1492150245.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:45.418Z,1492150245.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:45.800Z,1492150245.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:45.816Z,1492150245.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:46.204Z,1492150246.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:46.226Z,1492150246.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:46.603Z,1492150246.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:46.620Z,1492150246.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:47.003Z,1492150247.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:47.023Z,1492150247.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:47.412Z,1492150247.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:47.429Z,1492150247.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:47.811Z,1492150247.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:47.828Z,1492150247.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:48.232Z,1492150248.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:48.268Z,1492150248.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:48.616Z,1492150248.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:48.634Z,1492150248.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:48.993Z,1492150248.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:49.035Z,1492150249.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:49.393Z,1492150249.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:49.421Z,1492150249.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:49.793Z,1492150249.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:49.829Z,1492150249.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:50.193Z,1492150250.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:50.222Z,1492150250.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:50.614Z,1492150250.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:50.631Z,1492150250.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:50.993Z,1492150250.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:51.033Z,1492150251.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:51.393Z,1492150251.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:51.427Z,1492150251.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:51.797Z,1492150251.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:51.843Z,1492150251.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:52.193Z,1492150252.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:52.273Z,1492150252.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:52.620Z,1492150252.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:52.642Z,1492150252.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:53.008Z,1492150253.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:53.075Z,1492150253.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:53.397Z,1492150253.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:53.437Z,1492150253.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:53.796Z,1492150253.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:53.858Z,1492150253.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:54.193Z,1492150254.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:54.234Z,1492150254.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:54.601Z,1492150254.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:54.656Z,1492150254.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:55.001Z,1492150255.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:55.022Z,1492150255.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:55.402Z,1492150255.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:55.417Z,1492150255.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:55.800Z,1492150255.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:55.827Z,1492150255.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:56.205Z,1492150256.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:56.221Z,1492150256.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:56.611Z,1492150256.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:56.627Z,1492150256.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:57.002Z,1492150257.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:57.018Z,1492150257.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:57.405Z,1492150257.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:57.421Z,1492150257.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:57.572Z,1492150257.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:57.809Z,1492150257.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:57.830Z,1492150257.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:58.187Z,1492150258.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:58.214Z,1492150258.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:58.369Z,1492150258.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:58.596Z,1492150258.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:58.627Z,1492150258.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:58.776Z,1492150258.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:59.001Z,1492150259.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:59.022Z,1492150259.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:59.413Z,1492150259.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:59.458Z,1492150259.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:10:59.572Z,1492150259.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:59.805Z,1492150259.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:10:59.869Z,1492150259.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:00.203Z,1492150260.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:00.265Z,1492150260.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:00.368Z,1492150260.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:00.602Z,1492150260.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:00.622Z,1492150260.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:00.774Z,1492150260.774 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:01.001Z,1492150261.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:01.022Z,1492150261.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:01.400Z,1492150261.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:01.422Z,1492150261.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:01.880Z,1492150261.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:01.931Z,1492150261.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:02.252Z,1492150262.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:02.301Z,1492150262.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:02.595Z,1492150262.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:02.635Z,1492150262.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:03.030Z,1492150263.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:03.087Z,1492150263.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:03.405Z,1492150263.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:03.446Z,1492150263.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:03.804Z,1492150263.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:03.870Z,1492150263.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:04.195Z,1492150264.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:04.243Z,1492150264.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:04.604Z,1492150264.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:04.649Z,1492150264.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:05.005Z,1492150265.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:05.054Z,1492150265.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:05.401Z,1492150265.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:05.471Z,1492150265.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:05.815Z,1492150265.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:05.831Z,1492150265.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:06.201Z,1492150266.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:06.274Z,1492150266.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:06.628Z,1492150266.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:06.717Z,1492150266.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:07.005Z,1492150267.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:07.034Z,1492150267.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:07.395Z,1492150267.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:07.450Z,1492150267.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:07.793Z,1492150267.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:07.867Z,1492150267.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:08.196Z,1492150268.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:08.225Z,1492150268.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:08.605Z,1492150268.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:08.642Z,1492150268.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:08.993Z,1492150268.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:09.009Z,1492150269.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:09.401Z,1492150269.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:09.432Z,1492150269.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:09.805Z,1492150269.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:09.830Z,1492150269.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:10.200Z,1492150270.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:10.227Z,1492150270.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:10.596Z,1492150270.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:10.662Z,1492150270.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:10.997Z,1492150270.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:11.023Z,1492150271.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:11.378Z,1492150271.378 [NAL9602](INFO): SBD MO Status=2, MOMSN=2117, MT Status=2, MTMSN=0
2017-04-14T06:11:11.378Z,1492150271.378 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:11:11.395Z,1492150271.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:11.438Z,1492150271.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:11.816Z,1492150271.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:11.832Z,1492150271.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:12.201Z,1492150272.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:12.227Z,1492150272.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:12.593Z,1492150272.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:12.614Z,1492150272.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:12.994Z,1492150272.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:13.010Z,1492150273.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:13.401Z,1492150273.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:13.441Z,1492150273.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:13.802Z,1492150273.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:13.818Z,1492150273.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:14.201Z,1492150274.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:14.224Z,1492150274.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:14.605Z,1492150274.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:14.622Z,1492150274.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:15.003Z,1492150275.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:15.026Z,1492150275.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:15.417Z,1492150275.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:15.465Z,1492150275.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:15.828Z,1492150275.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:15.844Z,1492150275.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:15.871Z,1492150275.871 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:15.871Z,1492150275.871 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T06:11:15.871Z,1492150275.871 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:11:15.919Z,1492150275.920 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:11:16.204Z,1492150276.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:16.232Z,1492150276.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:16.253Z,1492150276.253 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:11:16.253Z,1492150276.253 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T06:11:16.637Z,1492150276.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:16.662Z,1492150276.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:16.662Z,1492150276.662 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-04-14T06:11:16.662Z,1492150276.662 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:11:16.697Z,1492150276.697 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:16.697Z,1492150276.697 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-04-14T06:11:16.697Z,1492150276.697 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:11:16.699Z,1492150276.699 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:11:16.703Z,1492150276.703 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:11:16.704Z,1492150276.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:11:16.733Z,1492150276.733 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:11:16.733Z,1492150276.733 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:11:17.016Z,1492150277.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:17.060Z,1492150277.060 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:11:17.060Z,1492150277.060 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-04-14T06:11:17.060Z,1492150277.060 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:11:17.060Z,1492150277.060 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-04-14T06:11:17.405Z,1492150277.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:17.420Z,1492150277.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:11:17.420Z,1492150277.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:11:17.420Z,1492150277.420 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:11:17.449Z,1492150277.449 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:11:17.450Z,1492150277.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:11:17.450Z,1492150277.450 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:11:17.805Z,1492150277.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:17.821Z,1492150277.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:18.202Z,1492150278.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:18.222Z,1492150278.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:18.597Z,1492150278.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:18.671Z,1492150278.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:19.002Z,1492150279.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:19.062Z,1492150279.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:19.397Z,1492150279.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:19.433Z,1492150279.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:19.793Z,1492150279.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:19.821Z,1492150279.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:20.228Z,1492150280.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:20.277Z,1492150280.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:20.622Z,1492150280.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:20.638Z,1492150280.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:21.017Z,1492150281.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:21.073Z,1492150281.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:21.401Z,1492150281.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:21.477Z,1492150281.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:21.793Z,1492150281.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:21.827Z,1492150281.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:22.193Z,1492150282.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:22.232Z,1492150282.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:22.599Z,1492150282.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:22.626Z,1492150282.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:22.993Z,1492150282.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:23.026Z,1492150283.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:23.393Z,1492150283.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:23.427Z,1492150283.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:23.792Z,1492150283.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:23.824Z,1492150283.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:24.205Z,1492150284.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:24.234Z,1492150284.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:24.594Z,1492150284.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:24.661Z,1492150284.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:25.009Z,1492150285.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:25.053Z,1492150285.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:25.406Z,1492150285.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:25.426Z,1492150285.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:25.816Z,1492150285.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:25.831Z,1492150285.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:26.231Z,1492150286.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:26.349Z,1492150286.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:26.636Z,1492150286.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:26.697Z,1492150286.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:27.035Z,1492150287.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:27.079Z,1492150287.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:27.450Z,1492150287.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:27.503Z,1492150287.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:27.804Z,1492150287.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:27.848Z,1492150287.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:28.213Z,1492150288.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:28.269Z,1492150288.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:28.595Z,1492150288.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:28.673Z,1492150288.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:28.994Z,1492150288.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:29.014Z,1492150289.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:29.427Z,1492150289.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:29.525Z,1492150289.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:29.824Z,1492150289.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:29.895Z,1492150289.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:30.219Z,1492150290.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:30.376Z,1492150290.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:30.612Z,1492150290.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:30.671Z,1492150290.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:30.995Z,1492150290.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:31.030Z,1492150291.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:31.417Z,1492150291.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:31.456Z,1492150291.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:31.799Z,1492150291.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:31.854Z,1492150291.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:32.202Z,1492150292.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:32.250Z,1492150292.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:32.603Z,1492150292.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:32.666Z,1492150292.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:32.998Z,1492150292.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:33.030Z,1492150293.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:33.393Z,1492150293.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:33.426Z,1492150293.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:33.794Z,1492150293.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:33.860Z,1492150293.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:34.203Z,1492150294.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:34.218Z,1492150294.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:34.598Z,1492150294.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:34.650Z,1492150294.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:35.000Z,1492150295.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:35.057Z,1492150295.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:35.398Z,1492150295.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:35.424Z,1492150295.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:35.803Z,1492150295.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:35.819Z,1492150295.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:39.458Z,1492150299.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:39.474Z,1492150299.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:39.576Z,1492150299.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:39.622Z,1492150299.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:39.977Z,1492150299.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:40.037Z,1492150300.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:40.374Z,1492150300.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:40.420Z,1492150300.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:40.767Z,1492150300.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:40.834Z,1492150300.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:41.170Z,1492150301.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:41.190Z,1492150301.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:41.580Z,1492150301.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:41.622Z,1492150301.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:41.998Z,1492150301.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:42.049Z,1492150302.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:42.370Z,1492150302.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:42.418Z,1492150302.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:42.761Z,1492150302.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:42.797Z,1492150302.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:43.165Z,1492150303.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:43.182Z,1492150303.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:43.564Z,1492150303.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:43.581Z,1492150303.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:44.018Z,1492150304.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:44.078Z,1492150304.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:44.381Z,1492150304.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:44.425Z,1492150304.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:44.766Z,1492150304.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:44.783Z,1492150304.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:45.167Z,1492150305.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:45.184Z,1492150305.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:45.570Z,1492150305.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:45.586Z,1492150305.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:45.989Z,1492150305.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:46.078Z,1492150306.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:46.363Z,1492150306.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:46.401Z,1492150306.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:46.742Z,1492150306.742 [NAL9602](INFO): SBD MO Status=0, MOMSN=2117, MT Status=0, MTMSN=0
2017-04-14T06:11:46.742Z,1492150306.742 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:11:46.762Z,1492150306.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:46.811Z,1492150306.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:47.158Z,1492150307.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:47.228Z,1492150307.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:47.576Z,1492150307.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:47.657Z,1492150307.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:47.978Z,1492150307.978 [NAL9602](INFO): GPS fix at 20170414T061203: (36.802332, -121.787144)
2017-04-14T06:11:48.020Z,1492150308.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:48.107Z,1492150308.107 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:11:48.111Z,1492150308.111 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:11:48.376Z,1492150308.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:48.438Z,1492150308.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:48.438Z,1492150308.438 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:11:48.438Z,1492150308.438 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:11:48.462Z,1492150308.462 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:48.462Z,1492150308.462 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:11:48.462Z,1492150308.462 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:11:48.526Z,1492150308.526 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:11:48.526Z,1492150308.526 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:11:48.845Z,1492150308.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:48.852Z,1492150308.852 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T06:11:48.890Z,1492150308.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:11:48.891Z,1492150308.891 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:11:48.891Z,1492150308.891 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:11:48.892Z,1492150308.892 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:11:49.256Z,1492150309.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:49.288Z,1492150309.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:11:49.289Z,1492150309.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:11:49.289Z,1492150309.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:11:49.299Z,1492150309.299 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:11:49.303Z,1492150309.303 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:11:49.304Z,1492150309.304 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:11:54.166Z,1492150314.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:54.350Z,1492150314.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:54.437Z,1492150314.437 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0100.lzma
2017-04-14T06:11:54.469Z,1492150314.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:54.510Z,1492150314.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:54.877Z,1492150314.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:54.970Z,1492150314.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:55.218Z,1492150315.218 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0100.lzma.bak
2017-04-14T06:11:55.218Z,1492150315.218 [DataOverHttps](INFO): SBD MOMSN=4885341
2017-04-14T06:11:55.287Z,1492150315.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:55.321Z,1492150315.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:55.705Z,1492150315.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:55.724Z,1492150315.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:56.038Z,1492150316.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:56.070Z,1492150316.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:59.518Z,1492150319.518 [NAL9602](INFO): Powering down
2017-04-14T06:11:59.548Z,1492150319.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:59.564Z,1492150319.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:11:59.695Z,1492150319.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:11:59.711Z,1492150319.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:00.071Z,1492150320.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:00.086Z,1492150320.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:00.466Z,1492150320.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:00.482Z,1492150320.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:00.876Z,1492150320.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:00.996Z,1492150320.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:01.271Z,1492150321.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:01.315Z,1492150321.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:07.119Z,1492150327.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:07.178Z,1492150327.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:07.258Z,1492150327.258 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0101.lzma
2017-04-14T06:12:07.286Z,1492150327.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:07.342Z,1492150327.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:07.669Z,1492150327.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:07.754Z,1492150327.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:08.012Z,1492150328.012 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0101.lzma.bak
2017-04-14T06:12:08.013Z,1492150328.013 [DataOverHttps](INFO): SBD MOMSN=4885344
2017-04-14T06:12:08.065Z,1492150328.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:08.108Z,1492150328.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:08.490Z,1492150328.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:08.522Z,1492150328.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:08.531Z,1492150328.532 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:12:08.531Z,1492150328.532 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:12:08.532Z,1492150328.532 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:12:08.830Z,1492150328.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:08.868Z,1492150328.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:12.694Z,1492150332.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:12.719Z,1492150332.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:12.828Z,1492150332.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:12.845Z,1492150332.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:13.187Z,1492150333.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:13.221Z,1492150333.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:13.587Z,1492150333.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:13.615Z,1492150333.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:13.978Z,1492150333.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:13.994Z,1492150333.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:14.389Z,1492150334.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:14.405Z,1492150334.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:14.793Z,1492150334.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:14.809Z,1492150334.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:15.190Z,1492150335.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:15.206Z,1492150335.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:15.592Z,1492150335.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:15.611Z,1492150335.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:15.995Z,1492150335.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:16.016Z,1492150336.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:16.391Z,1492150336.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:16.425Z,1492150336.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:16.790Z,1492150336.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:16.806Z,1492150336.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:17.176Z,1492150337.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:17.227Z,1492150337.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:17.595Z,1492150337.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:17.611Z,1492150337.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:17.985Z,1492150337.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:18.017Z,1492150338.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:18.387Z,1492150338.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:18.406Z,1492150338.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:18.788Z,1492150338.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:18.804Z,1492150338.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:19.181Z,1492150339.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:19.210Z,1492150339.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:19.456Z,1492150339.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:19.590Z,1492150339.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:19.606Z,1492150339.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:19.990Z,1492150339.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:20.067Z,1492150340.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:20.252Z,1492150340.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:20.400Z,1492150340.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:20.458Z,1492150340.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:20.656Z,1492150340.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:20.780Z,1492150340.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:20.804Z,1492150340.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:21.183Z,1492150341.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:21.234Z,1492150341.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:21.586Z,1492150341.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:21.624Z,1492150341.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:21.978Z,1492150341.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:22.034Z,1492150342.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:22.070Z,1492150342.070 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:12:22.385Z,1492150342.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:22.452Z,1492150342.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:22.782Z,1492150342.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:22.799Z,1492150342.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:23.185Z,1492150343.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:23.201Z,1492150343.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:23.580Z,1492150343.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:23.604Z,1492150343.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:23.984Z,1492150343.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:24.006Z,1492150344.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:24.380Z,1492150344.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:24.413Z,1492150344.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:24.777Z,1492150344.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:24.804Z,1492150344.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:25.173Z,1492150345.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:25.209Z,1492150345.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:25.579Z,1492150345.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:25.613Z,1492150345.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:25.982Z,1492150345.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:25.998Z,1492150345.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:26.378Z,1492150346.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:26.398Z,1492150346.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:26.778Z,1492150346.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:26.794Z,1492150346.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:27.186Z,1492150347.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:27.202Z,1492150347.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:27.588Z,1492150347.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:27.605Z,1492150347.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:27.981Z,1492150347.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:27.996Z,1492150347.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:28.384Z,1492150348.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:28.405Z,1492150348.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:28.784Z,1492150348.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:28.800Z,1492150348.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:29.174Z,1492150349.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:29.209Z,1492150349.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:29.575Z,1492150349.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:29.613Z,1492150349.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:29.973Z,1492150349.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:30.017Z,1492150350.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:30.381Z,1492150350.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:30.408Z,1492150350.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:30.773Z,1492150350.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:30.810Z,1492150350.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:31.173Z,1492150351.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:31.210Z,1492150351.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:31.573Z,1492150351.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:31.610Z,1492150351.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:31.977Z,1492150351.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:32.010Z,1492150352.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:32.381Z,1492150352.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:32.408Z,1492150352.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:32.773Z,1492150352.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:32.809Z,1492150352.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:33.178Z,1492150353.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:33.223Z,1492150353.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:33.582Z,1492150353.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:33.618Z,1492150353.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:33.977Z,1492150353.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:33.992Z,1492150353.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:34.389Z,1492150354.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:34.447Z,1492150354.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:34.780Z,1492150354.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:34.840Z,1492150354.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:35.177Z,1492150355.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:35.193Z,1492150355.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:35.432Z,1492150355.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:35.580Z,1492150355.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:35.596Z,1492150355.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:35.980Z,1492150355.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:35.996Z,1492150355.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:36.228Z,1492150356.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:36.390Z,1492150356.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:36.442Z,1492150356.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:36.632Z,1492150356.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:36.784Z,1492150356.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:36.799Z,1492150356.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:37.181Z,1492150357.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:37.219Z,1492150357.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:37.430Z,1492150357.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:37.585Z,1492150357.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:37.644Z,1492150357.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:37.973Z,1492150357.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:38.000Z,1492150358.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:38.224Z,1492150358.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:38.373Z,1492150358.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:38.406Z,1492150358.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:38.628Z,1492150358.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:38.772Z,1492150358.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:38.810Z,1492150358.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:39.185Z,1492150359.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:39.201Z,1492150359.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:39.573Z,1492150359.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:39.607Z,1492150359.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:39.973Z,1492150359.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:40.006Z,1492150360.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:40.377Z,1492150360.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:40.404Z,1492150360.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:40.781Z,1492150360.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:40.814Z,1492150360.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:41.171Z,1492150361.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:41.199Z,1492150361.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:41.582Z,1492150361.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:41.618Z,1492150361.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:41.978Z,1492150361.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:41.994Z,1492150361.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:42.379Z,1492150362.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:42.395Z,1492150362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:42.783Z,1492150362.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:42.825Z,1492150362.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:43.177Z,1492150363.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:43.205Z,1492150363.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:43.581Z,1492150363.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:43.597Z,1492150363.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:43.980Z,1492150363.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:44.002Z,1492150364.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:44.394Z,1492150364.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:44.409Z,1492150364.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:44.773Z,1492150364.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:44.807Z,1492150364.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:45.181Z,1492150365.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:45.209Z,1492150365.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:45.579Z,1492150365.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:45.608Z,1492150365.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:45.973Z,1492150365.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:45.994Z,1492150365.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:46.381Z,1492150366.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:46.423Z,1492150366.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:46.785Z,1492150366.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:46.821Z,1492150366.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:47.185Z,1492150367.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:47.221Z,1492150367.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:47.582Z,1492150367.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:47.602Z,1492150367.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:47.982Z,1492150367.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:47.997Z,1492150367.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:48.381Z,1492150368.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:48.402Z,1492150368.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:48.785Z,1492150368.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:48.794Z,1492150368.793 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:12:48.794Z,1492150368.794 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:12:48.794Z,1492150368.794 [BPC1](ERROR): Data Fault
2017-04-14T06:12:48.803Z,1492150368.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:48.840Z,1492150368.840 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:12:49.176Z,1492150369.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:49.202Z,1492150369.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:49.580Z,1492150369.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:49.606Z,1492150369.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:49.980Z,1492150369.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:50.001Z,1492150370.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:50.021Z,1492150370.021 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:12:50.021Z,1492150370.021 [BPC1] No Fault, FailCount= 1
2017-04-14T06:12:50.373Z,1492150370.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:50.442Z,1492150370.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:50.774Z,1492150370.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:50.815Z,1492150370.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:51.177Z,1492150371.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:51.198Z,1492150371.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:51.575Z,1492150371.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:51.591Z,1492150371.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:51.980Z,1492150371.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:52.021Z,1492150372.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:52.390Z,1492150372.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:52.410Z,1492150372.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:52.775Z,1492150372.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:52.808Z,1492150372.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:53.170Z,1492150373.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:53.204Z,1492150373.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:53.576Z,1492150373.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:53.608Z,1492150373.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:53.973Z,1492150373.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:54.010Z,1492150374.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:54.384Z,1492150374.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:54.405Z,1492150374.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:54.773Z,1492150374.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:54.800Z,1492150374.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:55.173Z,1492150375.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:55.206Z,1492150375.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:55.570Z,1492150375.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:55.622Z,1492150375.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:55.973Z,1492150375.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:56.010Z,1492150376.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:56.381Z,1492150376.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:56.407Z,1492150376.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:56.773Z,1492150376.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:56.794Z,1492150376.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:57.177Z,1492150377.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:57.220Z,1492150377.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:57.392Z,1492150377.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:57.573Z,1492150377.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:57.588Z,1492150377.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:57.983Z,1492150377.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:58.022Z,1492150378.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:58.188Z,1492150378.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:58.382Z,1492150378.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:58.398Z,1492150378.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:58.592Z,1492150378.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:58.782Z,1492150378.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:58.797Z,1492150378.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:59.182Z,1492150379.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:59.197Z,1492150379.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:59.388Z,1492150379.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:59.581Z,1492150379.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:12:59.601Z,1492150379.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:12:59.982Z,1492150379.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:00.006Z,1492150380.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:00.184Z,1492150380.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:00.394Z,1492150380.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:00.414Z,1492150380.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:00.588Z,1492150380.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:00.773Z,1492150380.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:00.814Z,1492150380.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:01.173Z,1492150381.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:01.208Z,1492150381.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:01.386Z,1492150381.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:01.577Z,1492150381.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:01.607Z,1492150381.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:01.973Z,1492150381.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:02.013Z,1492150382.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:02.180Z,1492150382.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:02.373Z,1492150382.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:02.412Z,1492150382.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:02.584Z,1492150382.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:02.785Z,1492150382.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:02.858Z,1492150382.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:03.177Z,1492150383.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:03.238Z,1492150383.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:03.380Z,1492150383.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:03.573Z,1492150383.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:03.588Z,1492150383.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:03.973Z,1492150383.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:04.025Z,1492150384.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:04.176Z,1492150384.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:04.378Z,1492150384.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:04.402Z,1492150384.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:04.580Z,1492150384.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:04.780Z,1492150384.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:04.827Z,1492150384.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:05.181Z,1492150385.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:05.232Z,1492150385.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:05.376Z,1492150385.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:05.581Z,1492150385.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:05.597Z,1492150385.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:05.973Z,1492150385.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:06.056Z,1492150386.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:06.172Z,1492150386.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:06.391Z,1492150386.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:06.461Z,1492150386.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:06.576Z,1492150386.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:06.775Z,1492150386.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:06.814Z,1492150386.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:07.175Z,1492150387.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:07.234Z,1492150387.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:07.372Z,1492150387.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:07.572Z,1492150387.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:07.615Z,1492150387.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:07.981Z,1492150387.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:08.029Z,1492150388.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:08.168Z,1492150388.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:08.381Z,1492150388.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:08.402Z,1492150388.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:08.572Z,1492150388.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:08.781Z,1492150388.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:08.796Z,1492150388.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:09.181Z,1492150389.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:09.197Z,1492150389.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:09.369Z,1492150389.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:10.164Z,1492150390.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:10.568Z,1492150390.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:11.364Z,1492150391.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:12.160Z,1492150392.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:12.564Z,1492150392.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:12.888Z,1492150392.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:12.913Z,1492150392.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:13.072Z,1492150393.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:13.105Z,1492150393.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:13.362Z,1492150393.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:13.445Z,1492150393.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:13.487Z,1492150393.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:13.920Z,1492150393.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:13.964Z,1492150393.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:14.156Z,1492150394.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:14.255Z,1492150394.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:14.309Z,1492150394.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:14.560Z,1492150394.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:14.633Z,1492150394.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:14.686Z,1492150394.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:15.038Z,1492150395.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:15.106Z,1492150395.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:15.356Z,1492150395.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:15.437Z,1492150395.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:15.454Z,1492150395.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:15.841Z,1492150395.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:15.858Z,1492150395.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:16.152Z,1492150396.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:16.237Z,1492150396.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:16.270Z,1492150396.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:16.564Z,1492150396.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:16.640Z,1492150396.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:16.661Z,1492150396.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:17.045Z,1492150397.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:17.081Z,1492150397.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:17.360Z,1492150397.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:17.448Z,1492150397.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:17.509Z,1492150397.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:17.837Z,1492150397.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:17.887Z,1492150397.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:18.156Z,1492150398.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:18.241Z,1492150398.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:18.276Z,1492150398.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:18.560Z,1492150398.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:18.637Z,1492150398.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:18.682Z,1492150398.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:19.041Z,1492150399.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:19.082Z,1492150399.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:19.356Z,1492150399.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:19.464Z,1492150399.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:19.529Z,1492150399.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:19.885Z,1492150399.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:19.911Z,1492150399.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:20.152Z,1492150400.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:20.235Z,1492150400.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:20.309Z,1492150400.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:20.556Z,1492150400.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:20.654Z,1492150400.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:20.686Z,1492150400.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:21.039Z,1492150401.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:21.061Z,1492150401.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:21.352Z,1492150401.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:21.440Z,1492150401.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:21.496Z,1492150401.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:21.841Z,1492150401.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:21.871Z,1492150401.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:22.148Z,1492150402.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:22.230Z,1492150402.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:22.266Z,1492150402.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:22.552Z,1492150402.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:22.630Z,1492150402.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:22.661Z,1492150402.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:23.030Z,1492150403.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:23.064Z,1492150403.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:23.348Z,1492150403.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:23.426Z,1492150403.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:23.464Z,1492150403.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:23.837Z,1492150403.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:23.884Z,1492150403.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:24.144Z,1492150404.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:24.255Z,1492150404.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:24.271Z,1492150404.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:24.549Z,1492150404.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:24.637Z,1492150404.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:24.663Z,1492150404.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:25.037Z,1492150405.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:25.081Z,1492150405.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:25.344Z,1492150405.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:25.437Z,1492150405.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:25.470Z,1492150405.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:25.831Z,1492150405.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:25.844Z,1492150405.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x16298 got:0x32611
2017-04-14T06:13:25.872Z,1492150405.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:26.140Z,1492150406.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:26.237Z,1492150406.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:26.286Z,1492150406.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:26.544Z,1492150406.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:26.637Z,1492150406.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:26.682Z,1492150406.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:27.037Z,1492150407.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:27.084Z,1492150407.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:27.340Z,1492150407.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:27.442Z,1492150407.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:27.489Z,1492150407.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:27.882Z,1492150407.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:27.935Z,1492150407.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:28.136Z,1492150408.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:28.232Z,1492150408.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:28.272Z,1492150408.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:28.540Z,1492150408.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:28.638Z,1492150408.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:28.660Z,1492150408.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:29.045Z,1492150409.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:29.061Z,1492150409.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:29.336Z,1492150409.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:29.437Z,1492150409.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:29.484Z,1492150409.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:29.836Z,1492150409.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:29.859Z,1492150409.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:30.132Z,1492150410.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:30.241Z,1492150410.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:30.268Z,1492150410.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:30.540Z,1492150410.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:30.642Z,1492150410.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:30.670Z,1492150410.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:31.029Z,1492150411.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:31.074Z,1492150411.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:31.337Z,1492150411.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:31.433Z,1492150411.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:31.466Z,1492150411.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:31.829Z,1492150411.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:31.890Z,1492150411.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:32.132Z,1492150412.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:32.235Z,1492150412.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:32.314Z,1492150412.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:32.540Z,1492150412.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:32.634Z,1492150412.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:32.678Z,1492150412.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:33.033Z,1492150413.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:33.075Z,1492150413.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:33.336Z,1492150413.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:33.435Z,1492150413.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:33.486Z,1492150413.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:33.834Z,1492150413.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:33.874Z,1492150413.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:34.132Z,1492150414.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:34.233Z,1492150414.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:34.298Z,1492150414.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:34.536Z,1492150414.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:34.645Z,1492150414.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:34.706Z,1492150414.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:35.105Z,1492150415.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:35.128Z,1492150415.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:35.332Z,1492150415.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:35.435Z,1492150415.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:35.450Z,1492150415.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:35.837Z,1492150415.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:35.877Z,1492150415.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:36.128Z,1492150416.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:36.232Z,1492150416.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:36.262Z,1492150416.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:36.532Z,1492150416.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:36.649Z,1492150416.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:36.664Z,1492150416.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:37.041Z,1492150417.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:37.057Z,1492150417.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:37.328Z,1492150417.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:37.441Z,1492150417.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:37.464Z,1492150417.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:37.844Z,1492150417.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:37.859Z,1492150417.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:38.124Z,1492150418.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:38.251Z,1492150418.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:38.266Z,1492150418.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:38.528Z,1492150418.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:38.646Z,1492150418.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:38.662Z,1492150418.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:39.029Z,1492150419.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:39.064Z,1492150419.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:39.324Z,1492150419.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:39.426Z,1492150419.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:39.470Z,1492150419.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:39.832Z,1492150419.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:39.866Z,1492150419.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:40.120Z,1492150420.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:40.233Z,1492150420.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:40.266Z,1492150420.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:40.524Z,1492150420.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:40.626Z,1492150420.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:40.665Z,1492150420.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:41.048Z,1492150421.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:41.070Z,1492150421.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:41.320Z,1492150421.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:41.431Z,1492150421.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:41.462Z,1492150421.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:41.853Z,1492150421.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:41.882Z,1492150421.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:42.116Z,1492150422.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:42.229Z,1492150422.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:42.274Z,1492150422.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:42.520Z,1492150422.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:42.650Z,1492150422.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:42.666Z,1492150422.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:43.032Z,1492150423.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:43.060Z,1492150423.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:43.316Z,1492150423.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:43.433Z,1492150423.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:43.472Z,1492150423.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:43.836Z,1492150423.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:43.873Z,1492150423.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:44.115Z,1492150424.115 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:44.243Z,1492150424.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:44.259Z,1492150424.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:44.520Z,1492150424.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:44.644Z,1492150424.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:44.660Z,1492150424.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:45.038Z,1492150425.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:45.058Z,1492150425.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:45.316Z,1492150425.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:45.448Z,1492150425.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:45.464Z,1492150425.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:45.849Z,1492150425.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:45.865Z,1492150425.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:46.112Z,1492150426.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:46.244Z,1492150426.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:46.260Z,1492150426.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:46.516Z,1492150426.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:46.646Z,1492150426.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:46.705Z,1492150426.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:47.030Z,1492150427.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:47.117Z,1492150427.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:47.312Z,1492150427.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:47.431Z,1492150427.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:47.467Z,1492150427.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:47.835Z,1492150427.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:47.890Z,1492150427.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:48.108Z,1492150428.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:48.241Z,1492150428.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:48.276Z,1492150428.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:48.512Z,1492150428.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:48.638Z,1492150428.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:48.683Z,1492150428.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:49.039Z,1492150429.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:49.093Z,1492150429.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:49.310Z,1492150429.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:49.441Z,1492150429.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:49.476Z,1492150429.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:49.840Z,1492150429.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:49.872Z,1492150429.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:50.104Z,1492150430.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:50.244Z,1492150430.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:50.269Z,1492150430.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:50.508Z,1492150430.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:50.646Z,1492150430.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:50.688Z,1492150430.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:51.040Z,1492150431.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:51.055Z,1492150431.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:51.304Z,1492150431.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:51.434Z,1492150431.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:51.450Z,1492150431.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:51.852Z,1492150431.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:51.868Z,1492150431.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:52.100Z,1492150432.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:52.246Z,1492150432.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:52.266Z,1492150432.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:52.504Z,1492150432.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:52.639Z,1492150432.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:52.655Z,1492150432.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:53.045Z,1492150433.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:53.061Z,1492150433.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:53.300Z,1492150433.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:53.442Z,1492150433.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:53.457Z,1492150433.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:53.841Z,1492150433.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:53.858Z,1492150433.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:54.096Z,1492150434.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:54.240Z,1492150434.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:54.271Z,1492150434.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:54.500Z,1492150434.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:54.633Z,1492150434.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:54.659Z,1492150434.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:55.038Z,1492150435.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:55.066Z,1492150435.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:55.296Z,1492150435.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:55.434Z,1492150435.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:55.462Z,1492150435.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:55.835Z,1492150435.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:55.884Z,1492150435.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:56.094Z,1492150436.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:56.237Z,1492150436.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:56.264Z,1492150436.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:56.500Z,1492150436.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:56.635Z,1492150436.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:56.663Z,1492150436.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:57.038Z,1492150437.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:57.065Z,1492150437.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:57.296Z,1492150437.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:57.437Z,1492150437.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:57.474Z,1492150437.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:57.841Z,1492150437.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:57.883Z,1492150437.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:58.092Z,1492150438.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:58.246Z,1492150438.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:58.279Z,1492150438.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:58.496Z,1492150438.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:58.642Z,1492150438.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:58.658Z,1492150438.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:59.042Z,1492150439.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:59.058Z,1492150439.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:59.292Z,1492150439.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:59.438Z,1492150439.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:59.461Z,1492150439.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:13:59.842Z,1492150439.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:13:59.859Z,1492150439.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:00.088Z,1492150440.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:00.242Z,1492150440.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:00.258Z,1492150440.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:00.492Z,1492150440.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:00.647Z,1492150440.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:00.662Z,1492150440.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:01.029Z,1492150441.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:01.102Z,1492150441.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:01.290Z,1492150441.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:01.437Z,1492150441.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:01.467Z,1492150441.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:01.833Z,1492150441.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:01.870Z,1492150441.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:02.084Z,1492150442.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:02.233Z,1492150442.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:02.302Z,1492150442.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:02.490Z,1492150442.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:02.629Z,1492150442.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:02.662Z,1492150442.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:03.031Z,1492150443.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:03.075Z,1492150443.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:03.284Z,1492150443.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:03.433Z,1492150443.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:03.505Z,1492150443.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:03.829Z,1492150443.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:03.860Z,1492150443.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:04.080Z,1492150444.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:04.248Z,1492150444.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:04.269Z,1492150444.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:04.484Z,1492150444.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:04.629Z,1492150444.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:04.662Z,1492150444.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:05.029Z,1492150445.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:05.068Z,1492150445.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:05.280Z,1492150445.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:05.429Z,1492150445.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:05.462Z,1492150445.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:05.829Z,1492150445.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:05.866Z,1492150445.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:06.076Z,1492150446.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:06.233Z,1492150446.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:06.266Z,1492150446.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:06.480Z,1492150446.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:06.632Z,1492150446.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:06.666Z,1492150446.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:07.033Z,1492150447.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:07.065Z,1492150447.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:07.278Z,1492150447.278 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:07.429Z,1492150447.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:07.444Z,1492150447.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:07.833Z,1492150447.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:07.871Z,1492150447.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:08.072Z,1492150448.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:08.241Z,1492150448.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:08.268Z,1492150448.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:08.476Z,1492150448.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:08.629Z,1492150448.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:08.671Z,1492150448.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:09.033Z,1492150449.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:09.072Z,1492150449.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:09.272Z,1492150449.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:09.428Z,1492150449.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:09.444Z,1492150449.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:10.068Z,1492150450.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:10.472Z,1492150450.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:11.268Z,1492150451.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:12.064Z,1492150452.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:12.472Z,1492150452.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:12.870Z,1492150452.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:12.888Z,1492150452.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:12.996Z,1492150452.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:13.020Z,1492150453.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:13.268Z,1492150453.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:13.386Z,1492150453.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:13.401Z,1492150453.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:13.790Z,1492150453.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:13.806Z,1492150453.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:14.064Z,1492150454.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:14.176Z,1492150454.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:14.214Z,1492150454.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:14.468Z,1492150454.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:14.569Z,1492150454.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:14.621Z,1492150454.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:14.988Z,1492150454.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:15.052Z,1492150455.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:15.264Z,1492150455.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:15.375Z,1492150455.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:15.410Z,1492150455.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:15.815Z,1492150455.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:15.958Z,1492150455.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:16.060Z,1492150456.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:16.203Z,1492150456.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:16.276Z,1492150456.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:16.464Z,1492150456.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:16.579Z,1492150456.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:16.638Z,1492150456.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:16.984Z,1492150456.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:17.010Z,1492150457.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:17.053Z,1492150457.053 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:17.053Z,1492150457.053 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:14:17.053Z,1492150457.053 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:14:17.127Z,1492150457.128 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:14:17.260Z,1492150457.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:17.371Z,1492150457.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:17.451Z,1492150457.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:17.470Z,1492150457.470 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:14:17.470Z,1492150457.470 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:14:17.770Z,1492150457.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:17.846Z,1492150457.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:17.852Z,1492150457.852 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:14:17.853Z,1492150457.853 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:14:17.853Z,1492150457.853 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:14:18.056Z,1492150458.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:18.175Z,1492150458.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:18.214Z,1492150458.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:18.460Z,1492150458.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:18.582Z,1492150458.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:18.609Z,1492150458.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:18.973Z,1492150458.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:19.029Z,1492150459.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:19.256Z,1492150459.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:19.370Z,1492150459.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:19.391Z,1492150459.391 [PNI_TCM](ERROR): CRC does not match. Expected:0x30757 got:0x6593
2017-04-14T06:14:19.411Z,1492150459.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:19.773Z,1492150459.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:19.816Z,1492150459.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:20.052Z,1492150460.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:20.173Z,1492150460.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:20.212Z,1492150460.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:20.456Z,1492150460.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:20.569Z,1492150460.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:20.610Z,1492150460.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:20.978Z,1492150460.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:21.011Z,1492150461.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:21.252Z,1492150461.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:21.374Z,1492150461.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:21.417Z,1492150461.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:21.771Z,1492150461.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:21.787Z,1492150461.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:22.048Z,1492150462.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:22.186Z,1492150462.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:22.214Z,1492150462.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:22.452Z,1492150462.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:22.574Z,1492150462.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:22.598Z,1492150462.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:22.983Z,1492150462.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:22.998Z,1492150462.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:23.248Z,1492150463.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:23.378Z,1492150463.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:23.398Z,1492150463.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:23.806Z,1492150463.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:23.832Z,1492150463.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:24.044Z,1492150464.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:24.176Z,1492150464.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:24.200Z,1492150464.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:24.448Z,1492150464.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:24.583Z,1492150464.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:24.599Z,1492150464.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:24.985Z,1492150464.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:25.001Z,1492150465.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:25.244Z,1492150465.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:25.377Z,1492150465.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:25.414Z,1492150465.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:25.787Z,1492150465.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:25.803Z,1492150465.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:26.041Z,1492150466.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:26.174Z,1492150466.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:26.201Z,1492150466.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:26.444Z,1492150466.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:26.573Z,1492150466.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:26.606Z,1492150466.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:26.984Z,1492150466.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:27.006Z,1492150467.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:27.240Z,1492150467.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:27.391Z,1492150467.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:27.407Z,1492150467.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:27.774Z,1492150467.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:27.810Z,1492150467.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:28.038Z,1492150468.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:28.205Z,1492150468.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:28.221Z,1492150468.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:28.444Z,1492150468.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:28.596Z,1492150468.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:28.612Z,1492150468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:28.976Z,1492150468.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:29.012Z,1492150469.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:29.240Z,1492150469.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:29.372Z,1492150469.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:29.442Z,1492150469.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:29.769Z,1492150469.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:29.807Z,1492150469.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:30.036Z,1492150470.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:30.174Z,1492150470.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:30.239Z,1492150470.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:30.440Z,1492150470.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:30.572Z,1492150470.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:30.600Z,1492150470.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:30.978Z,1492150470.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:31.015Z,1492150471.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:31.236Z,1492150471.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:31.377Z,1492150471.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:31.426Z,1492150471.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:31.777Z,1492150471.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:31.794Z,1492150471.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:32.032Z,1492150472.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:32.186Z,1492150472.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:32.245Z,1492150472.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:32.436Z,1492150472.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:32.585Z,1492150472.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:32.638Z,1492150472.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:32.969Z,1492150472.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:32.999Z,1492150472.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:33.233Z,1492150473.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:33.378Z,1492150473.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:33.405Z,1492150473.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:33.772Z,1492150473.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:33.806Z,1492150473.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:34.028Z,1492150474.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:34.173Z,1492150474.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:34.206Z,1492150474.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:34.432Z,1492150474.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:34.569Z,1492150474.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:34.602Z,1492150474.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:34.973Z,1492150474.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:35.006Z,1492150475.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:35.228Z,1492150475.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:35.370Z,1492150475.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:35.401Z,1492150475.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:35.775Z,1492150475.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:35.811Z,1492150475.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:36.024Z,1492150476.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:36.169Z,1492150476.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:36.210Z,1492150476.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:36.428Z,1492150476.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:36.568Z,1492150476.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:36.583Z,1492150476.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:37.000Z,1492150477.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:37.018Z,1492150477.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:37.224Z,1492150477.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:37.377Z,1492150477.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:37.408Z,1492150477.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:37.796Z,1492150477.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:37.871Z,1492150477.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:38.020Z,1492150478.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:38.189Z,1492150478.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:38.218Z,1492150478.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:38.424Z,1492150478.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:38.579Z,1492150478.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:38.606Z,1492150478.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:38.976Z,1492150478.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:39.011Z,1492150479.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:39.221Z,1492150479.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:39.377Z,1492150479.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:39.416Z,1492150479.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:39.786Z,1492150479.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:39.806Z,1492150479.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:40.018Z,1492150480.018 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:40.203Z,1492150480.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:40.219Z,1492150480.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:40.428Z,1492150480.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:40.583Z,1492150480.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:40.611Z,1492150480.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:40.979Z,1492150480.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:41.011Z,1492150481.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:41.224Z,1492150481.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:41.381Z,1492150481.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:41.413Z,1492150481.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:41.777Z,1492150481.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:41.813Z,1492150481.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:42.020Z,1492150482.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:42.175Z,1492150482.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:42.191Z,1492150482.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:42.424Z,1492150482.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:42.577Z,1492150482.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:42.592Z,1492150482.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:42.978Z,1492150482.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:42.994Z,1492150482.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:43.221Z,1492150483.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:43.378Z,1492150483.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:43.393Z,1492150483.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:43.777Z,1492150483.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:43.798Z,1492150483.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:44.016Z,1492150484.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:44.183Z,1492150484.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:44.203Z,1492150484.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:44.420Z,1492150484.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:44.584Z,1492150484.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:44.652Z,1492150484.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:44.981Z,1492150484.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:45.015Z,1492150485.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:45.216Z,1492150485.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:45.381Z,1492150485.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:45.397Z,1492150485.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:45.769Z,1492150485.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:45.795Z,1492150485.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:46.012Z,1492150486.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:46.176Z,1492150486.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:46.233Z,1492150486.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:46.416Z,1492150486.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:46.581Z,1492150486.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:46.597Z,1492150486.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:46.969Z,1492150486.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:47.018Z,1492150487.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:47.212Z,1492150487.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:47.381Z,1492150487.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:47.441Z,1492150487.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:47.781Z,1492150487.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:47.802Z,1492150487.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:48.008Z,1492150488.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:48.189Z,1492150488.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:48.205Z,1492150488.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:48.412Z,1492150488.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:48.569Z,1492150488.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:48.605Z,1492150488.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:48.969Z,1492150488.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:49.008Z,1492150489.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:49.208Z,1492150489.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:49.369Z,1492150489.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:49.401Z,1492150489.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:49.402Z,1492150489.402 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:14:49.402Z,1492150489.402 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:14:49.409Z,1492150489.409 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:49.409Z,1492150489.409 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:14:49.409Z,1492150489.409 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:14:49.423Z,1492150489.423 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:14:49.423Z,1492150489.423 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:14:49.769Z,1492150489.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:49.819Z,1492150489.819 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:14:49.819Z,1492150489.819 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:14:49.820Z,1492150489.820 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:14:49.820Z,1492150489.820 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:14:50.004Z,1492150490.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:50.169Z,1492150490.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:50.201Z,1492150490.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:14:50.201Z,1492150490.201 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:14:50.202Z,1492150490.202 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:14:50.207Z,1492150490.207 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:14:50.207Z,1492150490.207 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:14:50.208Z,1492150490.208 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:14:50.408Z,1492150490.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:50.569Z,1492150490.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:50.605Z,1492150490.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:50.969Z,1492150490.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:51.001Z,1492150491.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:51.204Z,1492150491.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:51.382Z,1492150491.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:51.398Z,1492150491.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:51.780Z,1492150491.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:51.796Z,1492150491.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:52.000Z,1492150492.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:52.175Z,1492150492.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:52.196Z,1492150492.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:52.404Z,1492150492.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:52.587Z,1492150492.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:52.609Z,1492150492.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:52.981Z,1492150492.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:52.997Z,1492150492.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:53.200Z,1492150493.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:53.376Z,1492150493.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:53.392Z,1492150493.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:53.786Z,1492150493.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:53.802Z,1492150493.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:53.998Z,1492150493.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:54.194Z,1492150494.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:54.213Z,1492150494.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:54.404Z,1492150494.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:54.570Z,1492150494.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:54.598Z,1492150494.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:54.974Z,1492150494.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:55.001Z,1492150495.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:55.200Z,1492150495.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:55.391Z,1492150495.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:55.406Z,1492150495.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:55.769Z,1492150495.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:55.793Z,1492150495.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:55.997Z,1492150495.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:56.169Z,1492150496.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:56.206Z,1492150496.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:56.400Z,1492150496.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:56.576Z,1492150496.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:56.610Z,1492150496.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:56.974Z,1492150496.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:56.991Z,1492150496.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:57.197Z,1492150497.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:57.377Z,1492150497.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:57.415Z,1492150497.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:57.778Z,1492150497.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:57.840Z,1492150497.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:57.992Z,1492150497.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:58.181Z,1492150498.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:58.223Z,1492150498.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:58.396Z,1492150498.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:58.578Z,1492150498.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:58.598Z,1492150498.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:58.978Z,1492150498.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:58.994Z,1492150498.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:59.192Z,1492150499.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:59.381Z,1492150499.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:59.481Z,1492150499.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:14:59.777Z,1492150499.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:14:59.798Z,1492150499.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:00.013Z,1492150500.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:00.172Z,1492150500.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:00.202Z,1492150500.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:00.420Z,1492150500.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:00.577Z,1492150500.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:00.626Z,1492150500.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:00.969Z,1492150500.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:01.006Z,1492150501.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:01.216Z,1492150501.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:01.373Z,1492150501.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:01.422Z,1492150501.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:01.769Z,1492150501.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:01.823Z,1492150501.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:02.012Z,1492150502.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:02.169Z,1492150502.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:02.206Z,1492150502.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:02.416Z,1492150502.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:02.577Z,1492150502.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:02.610Z,1492150502.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:02.969Z,1492150502.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:03.002Z,1492150503.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:03.212Z,1492150503.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:03.377Z,1492150503.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:03.405Z,1492150503.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:03.801Z,1492150503.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:03.816Z,1492150503.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:04.008Z,1492150504.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:04.169Z,1492150504.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:04.206Z,1492150504.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:04.412Z,1492150504.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:04.566Z,1492150504.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:04.583Z,1492150504.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:04.969Z,1492150504.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:04.984Z,1492150504.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:05.208Z,1492150505.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:05.386Z,1492150505.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:05.437Z,1492150505.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:05.773Z,1492150505.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:05.790Z,1492150505.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:06.004Z,1492150506.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:06.171Z,1492150506.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:06.217Z,1492150506.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:06.408Z,1492150506.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:06.571Z,1492150506.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:06.633Z,1492150506.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:06.975Z,1492150506.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:07.020Z,1492150507.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:07.204Z,1492150507.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:07.364Z,1492150507.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:07.393Z,1492150507.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:07.780Z,1492150507.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:07.823Z,1492150507.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:08.000Z,1492150508.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:08.182Z,1492150508.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:08.230Z,1492150508.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:08.404Z,1492150508.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:08.582Z,1492150508.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:08.599Z,1492150508.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:08.981Z,1492150508.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:08.000Z,1492150509.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:09.200Z,1492150509.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:09.380Z,1492150509.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:09.398Z,1492150509.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:09.777Z,1492150509.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:09.799Z,1492150509.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:09.996Z,1492150509.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:10.404Z,1492150510.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:11.208Z,1492150511.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:12.004Z,1492150512.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:12.408Z,1492150512.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:13.204Z,1492150513.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:13.000Z,1492150514.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:14.234Z,1492150514.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:14.318Z,1492150514.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:14.404Z,1492150514.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:14.424Z,1492150514.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:14.462Z,1492150514.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:14.810Z,1492150514.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:14.870Z,1492150514.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:15.201Z,1492150515.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:15.208Z,1492150515.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:15.224Z,1492150515.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:15.658Z,1492150515.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:15.734Z,1492150515.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:16.004Z,1492150516.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:16.024Z,1492150516.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:16.077Z,1492150516.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:16.410Z,1492150516.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:16.415Z,1492150516.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:16.430Z,1492150516.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:16.815Z,1492150516.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:16.831Z,1492150516.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:17.201Z,1492150517.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:17.212Z,1492150517.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:17.240Z,1492150517.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:17.656Z,1492150517.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:17.683Z,1492150517.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:18.009Z,1492150518.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:18.017Z,1492150518.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:18.062Z,1492150518.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:18.412Z,1492150518.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:18.420Z,1492150518.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:18.435Z,1492150518.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:18.801Z,1492150518.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:18.828Z,1492150518.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:19.205Z,1492150519.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:19.208Z,1492150519.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:19.238Z,1492150519.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:19.601Z,1492150519.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:19.732Z,1492150519.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:19.998Z,1492150519.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:20.004Z,1492150520.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:20.017Z,1492150520.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:20.407Z,1492150520.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:20.408Z,1492150520.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:20.424Z,1492150520.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:20.809Z,1492150520.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:20.824Z,1492150520.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:21.195Z,1492150521.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:21.204Z,1492150521.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:21.211Z,1492150521.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:21.603Z,1492150521.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:21.619Z,1492150521.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:21.000Z,1492150522.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:22.004Z,1492150522.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:22.063Z,1492150522.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:22.401Z,1492150522.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:22.404Z,1492150522.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:22.439Z,1492150522.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:22.805Z,1492150522.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:22.832Z,1492150522.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:23.200Z,1492150523.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:23.210Z,1492150523.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:23.246Z,1492150523.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:23.601Z,1492150523.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:23.638Z,1492150523.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:23.996Z,1492150523.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:24.004Z,1492150524.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:24.046Z,1492150524.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:24.400Z,1492150524.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:24.406Z,1492150524.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:24.440Z,1492150524.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:24.809Z,1492150524.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:24.853Z,1492150524.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:25.198Z,1492150525.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:25.210Z,1492150525.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:25.230Z,1492150525.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:25.657Z,1492150525.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:25.682Z,1492150525.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:25.993Z,1492150525.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:26.021Z,1492150526.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:26.047Z,1492150526.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:26.396Z,1492150526.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:26.409Z,1492150526.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:26.437Z,1492150526.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:26.820Z,1492150526.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:26.835Z,1492150526.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:27.192Z,1492150527.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:27.209Z,1492150527.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:27.233Z,1492150527.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:27.636Z,1492150527.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:27.723Z,1492150527.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:27.993Z,1492150527.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:28.004Z,1492150528.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:28.082Z,1492150528.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:28.400Z,1492150528.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:28.406Z,1492150528.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:28.442Z,1492150528.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:28.810Z,1492150528.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:28.862Z,1492150528.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:29.197Z,1492150529.197 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:29.204Z,1492150529.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:29.219Z,1492150529.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:29.643Z,1492150529.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:29.701Z,1492150529.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:29.992Z,1492150529.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:30.013Z,1492150530.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:30.065Z,1492150530.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:30.398Z,1492150530.398 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:30.410Z,1492150530.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:30.451Z,1492150530.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:30.805Z,1492150530.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:30.821Z,1492150530.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:31.192Z,1492150531.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:31.207Z,1492150531.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:31.224Z,1492150531.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:31.650Z,1492150531.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:31.680Z,1492150531.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:31.988Z,1492150531.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:32.021Z,1492150532.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:32.070Z,1492150532.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:32.392Z,1492150532.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:32.412Z,1492150532.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:32.428Z,1492150532.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:32.814Z,1492150532.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:32.829Z,1492150532.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:33.189Z,1492150533.189 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:33.212Z,1492150533.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:33.227Z,1492150533.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:33.655Z,1492150533.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:33.679Z,1492150533.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:33.984Z,1492150533.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:34.017Z,1492150534.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:34.043Z,1492150534.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:34.388Z,1492150534.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:34.406Z,1492150534.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:34.433Z,1492150534.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:34.803Z,1492150534.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:34.819Z,1492150534.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:35.184Z,1492150535.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:35.214Z,1492150535.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:35.257Z,1492150535.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:35.607Z,1492150535.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:35.622Z,1492150535.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:35.980Z,1492150535.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:36.018Z,1492150536.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:36.045Z,1492150536.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:36.384Z,1492150536.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:36.409Z,1492150536.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:36.431Z,1492150536.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:36.801Z,1492150536.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:36.827Z,1492150536.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:37.180Z,1492150537.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:37.215Z,1492150537.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:37.232Z,1492150537.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:37.621Z,1492150537.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:37.642Z,1492150537.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:37.976Z,1492150537.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:38.001Z,1492150538.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:38.060Z,1492150538.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:38.380Z,1492150538.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:38.417Z,1492150538.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:38.449Z,1492150538.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:38.809Z,1492150538.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:38.837Z,1492150538.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:39.176Z,1492150539.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:39.201Z,1492150539.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:39.248Z,1492150539.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:39.637Z,1492150539.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:39.668Z,1492150539.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:39.968Z,1492150539.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:40.009Z,1492150540.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:40.057Z,1492150540.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:40.409Z,1492150540.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:40.425Z,1492150540.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:40.764Z,1492150540.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:40.812Z,1492150540.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:40.828Z,1492150540.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:41.214Z,1492150541.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:41.229Z,1492150541.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:41.562Z,1492150541.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:41.633Z,1492150541.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:41.665Z,1492150541.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:42.009Z,1492150542.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:42.012Z,1492150542.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:42.077Z,1492150542.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:42.414Z,1492150542.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:42.469Z,1492150542.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:42.808Z,1492150542.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:42.812Z,1492150542.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:42.829Z,1492150542.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:43.209Z,1492150543.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:43.232Z,1492150543.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:43.605Z,1492150543.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:43.630Z,1492150543.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:43.689Z,1492150543.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:44.008Z,1492150544.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:44.016Z,1492150544.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:44.032Z,1492150544.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:44.413Z,1492150544.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:44.470Z,1492150544.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:44.801Z,1492150544.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:44.812Z,1492150544.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:44.867Z,1492150544.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:45.213Z,1492150545.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:45.228Z,1492150545.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:45.608Z,1492150545.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:45.626Z,1492150545.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:45.669Z,1492150545.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:46.009Z,1492150546.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:46.012Z,1492150546.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:46.046Z,1492150546.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:46.405Z,1492150546.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:46.438Z,1492150546.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:46.801Z,1492150546.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:46.808Z,1492150546.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:46.851Z,1492150546.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:47.205Z,1492150547.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:47.245Z,1492150547.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:47.606Z,1492150547.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:47.656Z,1492150547.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:47.696Z,1492150547.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:48.001Z,1492150548.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:48.045Z,1492150548.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:48.068Z,1492150548.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:48.409Z,1492150548.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:48.453Z,1492150548.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:48.798Z,1492150548.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:48.813Z,1492150548.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:48.864Z,1492150548.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:49.206Z,1492150549.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:49.243Z,1492150549.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:49.610Z,1492150549.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:49.648Z,1492150549.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:49.660Z,1492150549.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:50.008Z,1492150550.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:50.035Z,1492150550.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:50.292Z,1492150550.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:50.406Z,1492150550.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:50.422Z,1492150550.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:50.813Z,1492150550.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:50.837Z,1492150550.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:51.088Z,1492150551.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:51.220Z,1492150551.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:51.242Z,1492150551.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:51.598Z,1492150551.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:51.649Z,1492150551.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:51.886Z,1492150551.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:52.019Z,1492150552.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:52.047Z,1492150552.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:52.324Z,1492150552.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:52.423Z,1492150552.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:52.440Z,1492150552.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:52.825Z,1492150552.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:52.840Z,1492150552.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:53.120Z,1492150553.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:53.201Z,1492150553.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:53.249Z,1492150553.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:53.603Z,1492150553.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:53.660Z,1492150553.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:53.918Z,1492150553.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:54.034Z,1492150554.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:54.057Z,1492150554.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:54.324Z,1492150554.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:54.416Z,1492150554.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:54.441Z,1492150554.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:54.813Z,1492150554.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:54.848Z,1492150554.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:55.123Z,1492150555.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:55.210Z,1492150555.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:55.246Z,1492150555.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:55.604Z,1492150555.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:55.653Z,1492150555.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:55.916Z,1492150555.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:56.018Z,1492150556.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:56.046Z,1492150556.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:56.320Z,1492150556.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:56.409Z,1492150556.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:56.445Z,1492150556.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:56.809Z,1492150556.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:56.906Z,1492150556.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:57.116Z,1492150557.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:57.205Z,1492150557.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:57.228Z,1492150557.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:57.614Z,1492150557.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:57.634Z,1492150557.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:57.912Z,1492150557.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:58.007Z,1492150558.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:58.073Z,1492150558.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:58.316Z,1492150558.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:58.410Z,1492150558.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:58.432Z,1492150558.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:58.813Z,1492150558.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:58.869Z,1492150558.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:59.112Z,1492150559.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:59.209Z,1492150559.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:59.253Z,1492150559.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:59.612Z,1492150559.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:15:59.641Z,1492150559.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:15:59.908Z,1492150559.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:00.023Z,1492150560.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:00.039Z,1492150560.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:00.312Z,1492150560.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:00.420Z,1492150560.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:00.436Z,1492150560.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:00.819Z,1492150560.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:00.834Z,1492150560.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:01.108Z,1492150561.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:01.214Z,1492150561.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:01.250Z,1492150561.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:01.636Z,1492150561.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:01.646Z,1492150561.646 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T06:16:01.689Z,1492150561.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:01.904Z,1492150561.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:02.018Z,1492150562.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:02.043Z,1492150562.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:02.308Z,1492150562.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:02.411Z,1492150562.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:02.431Z,1492150562.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:02.810Z,1492150562.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:02.842Z,1492150562.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:03.104Z,1492150563.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:03.218Z,1492150563.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:03.233Z,1492150563.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:03.611Z,1492150563.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:03.650Z,1492150563.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:03.900Z,1492150563.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:04.016Z,1492150564.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:04.032Z,1492150564.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:04.304Z,1492150564.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:04.401Z,1492150564.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:04.438Z,1492150564.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:04.795Z,1492150564.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:04.830Z,1492150564.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:05.100Z,1492150565.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:05.218Z,1492150565.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:05.234Z,1492150565.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:05.605Z,1492150565.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:05.638Z,1492150565.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:05.896Z,1492150565.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:06.001Z,1492150566.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:06.046Z,1492150566.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:06.300Z,1492150566.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:06.403Z,1492150566.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:06.437Z,1492150566.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:06.825Z,1492150566.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:06.841Z,1492150566.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:07.096Z,1492150567.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:07.213Z,1492150567.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:07.242Z,1492150567.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:07.601Z,1492150567.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:07.643Z,1492150567.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:07.892Z,1492150567.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:08.005Z,1492150568.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:08.042Z,1492150568.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:08.296Z,1492150568.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:08.409Z,1492150568.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:08.479Z,1492150568.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:08.805Z,1492150568.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:08.838Z,1492150568.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:09.092Z,1492150569.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:09.227Z,1492150569.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:09.243Z,1492150569.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:09.606Z,1492150569.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:09.637Z,1492150569.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:09.888Z,1492150569.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:10.005Z,1492150570.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:10.046Z,1492150570.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:10.292Z,1492150570.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:11.088Z,1492150571.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:11.884Z,1492150571.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:12.288Z,1492150572.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:13.084Z,1492150573.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:13.540Z,1492150573.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:13.657Z,1492150573.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:13.738Z,1492150573.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:13.771Z,1492150573.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:13.881Z,1492150573.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:14.149Z,1492150574.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:14.166Z,1492150574.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:14.288Z,1492150574.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:14.548Z,1492150574.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:14.595Z,1492150574.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:14.933Z,1492150574.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:14.966Z,1492150574.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:15.084Z,1492150575.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:15.333Z,1492150575.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:15.394Z,1492150575.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:15.734Z,1492150575.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:15.794Z,1492150575.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:15.880Z,1492150575.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:16.133Z,1492150576.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:16.170Z,1492150576.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:16.284Z,1492150576.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:16.541Z,1492150576.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:16.580Z,1492150576.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:16.937Z,1492150576.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:16.953Z,1492150576.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:17.080Z,1492150577.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:17.333Z,1492150577.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:17.350Z,1492150577.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:17.738Z,1492150577.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:17.758Z,1492150577.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:17.876Z,1492150577.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:18.145Z,1492150578.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:18.161Z,1492150578.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:18.284Z,1492150578.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:18.539Z,1492150578.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:18.555Z,1492150578.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:18.957Z,1492150578.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:18.978Z,1492150578.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:19.081Z,1492150579.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:19.327Z,1492150579.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:19.359Z,1492150579.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:19.734Z,1492150579.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:19.763Z,1492150579.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:19.876Z,1492150579.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:20.154Z,1492150580.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:20.180Z,1492150580.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:20.280Z,1492150580.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:20.538Z,1492150580.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:20.554Z,1492150580.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:20.938Z,1492150580.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:20.955Z,1492150580.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:21.076Z,1492150581.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:21.342Z,1492150581.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:21.358Z,1492150581.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:21.741Z,1492150581.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:21.756Z,1492150581.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:21.872Z,1492150581.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:22.141Z,1492150582.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:22.157Z,1492150582.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:22.276Z,1492150582.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:22.541Z,1492150582.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:22.556Z,1492150582.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:22.965Z,1492150582.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:22.998Z,1492150582.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:23.072Z,1492150583.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:23.345Z,1492150583.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:23.361Z,1492150583.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:23.742Z,1492150583.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:23.762Z,1492150583.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:23.868Z,1492150583.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:24.133Z,1492150584.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:24.168Z,1492150584.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:24.272Z,1492150584.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:24.550Z,1492150584.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:24.566Z,1492150584.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:24.933Z,1492150584.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:24.966Z,1492150584.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:25.068Z,1492150585.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:25.352Z,1492150585.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:25.368Z,1492150585.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:25.733Z,1492150585.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:25.760Z,1492150585.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:25.864Z,1492150585.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:26.152Z,1492150586.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:26.174Z,1492150586.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:26.268Z,1492150586.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:26.533Z,1492150586.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:26.570Z,1492150586.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:26.938Z,1492150586.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:26.955Z,1492150586.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:27.065Z,1492150587.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:27.345Z,1492150587.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:27.385Z,1492150587.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:27.742Z,1492150587.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:27.821Z,1492150587.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:27.860Z,1492150587.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:28.145Z,1492150588.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:28.190Z,1492150588.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:28.264Z,1492150588.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:28.537Z,1492150588.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:28.563Z,1492150588.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:28.942Z,1492150588.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:28.990Z,1492150588.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:29.060Z,1492150589.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:29.340Z,1492150589.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:29.356Z,1492150589.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:29.742Z,1492150589.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:29.795Z,1492150589.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:29.856Z,1492150589.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:30.144Z,1492150590.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:30.192Z,1492150590.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:30.260Z,1492150590.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:30.541Z,1492150590.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:30.557Z,1492150590.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:30.954Z,1492150590.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:31.010Z,1492150591.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:31.056Z,1492150591.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:31.345Z,1492150591.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:31.361Z,1492150591.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:31.733Z,1492150591.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:31.766Z,1492150591.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:31.853Z,1492150591.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:32.138Z,1492150592.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:32.174Z,1492150592.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:32.272Z,1492150592.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:32.541Z,1492150592.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:32.556Z,1492150592.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:32.934Z,1492150592.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:32.950Z,1492150592.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:33.068Z,1492150593.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:33.345Z,1492150593.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:33.360Z,1492150593.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:33.734Z,1492150593.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:33.749Z,1492150593.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:33.864Z,1492150593.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:34.133Z,1492150594.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:34.166Z,1492150594.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:34.272Z,1492150594.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:34.533Z,1492150594.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:34.559Z,1492150594.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:34.933Z,1492150594.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:34.969Z,1492150594.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:35.068Z,1492150595.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:35.330Z,1492150595.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:35.355Z,1492150595.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:35.733Z,1492150595.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:35.767Z,1492150595.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:35.864Z,1492150595.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:36.133Z,1492150596.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:36.159Z,1492150596.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:36.268Z,1492150596.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:36.530Z,1492150596.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:36.570Z,1492150596.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:36.937Z,1492150596.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:36.970Z,1492150596.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:37.064Z,1492150597.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:37.333Z,1492150597.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:37.360Z,1492150597.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:37.742Z,1492150597.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:37.758Z,1492150597.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:37.860Z,1492150597.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:38.141Z,1492150598.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:38.166Z,1492150598.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:38.264Z,1492150598.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:38.541Z,1492150598.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:38.562Z,1492150598.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:38.945Z,1492150598.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:38.961Z,1492150598.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:39.060Z,1492150599.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:39.352Z,1492150599.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:39.374Z,1492150599.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:39.740Z,1492150599.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:39.756Z,1492150599.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:39.857Z,1492150599.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:40.135Z,1492150600.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:40.190Z,1492150600.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:40.260Z,1492150600.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:40.535Z,1492150600.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:40.566Z,1492150600.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:40.933Z,1492150600.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:40.959Z,1492150600.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:41.056Z,1492150601.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:41.333Z,1492150601.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:41.360Z,1492150601.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:41.733Z,1492150601.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:41.770Z,1492150601.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:41.852Z,1492150601.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:42.133Z,1492150602.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:42.207Z,1492150602.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:42.256Z,1492150602.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:42.526Z,1492150602.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:42.582Z,1492150602.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:42.941Z,1492150602.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:42.979Z,1492150602.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:43.060Z,1492150603.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:43.341Z,1492150603.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:43.390Z,1492150603.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:43.742Z,1492150603.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:43.762Z,1492150603.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:43.856Z,1492150603.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:44.148Z,1492150604.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:44.202Z,1492150604.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:44.260Z,1492150604.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:44.542Z,1492150604.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:44.587Z,1492150604.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:44.946Z,1492150604.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:44.961Z,1492150604.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:45.056Z,1492150605.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:45.347Z,1492150605.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:45.370Z,1492150605.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:45.771Z,1492150605.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:45.852Z,1492150605.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:45.872Z,1492150605.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:46.133Z,1492150606.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:46.170Z,1492150606.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:46.256Z,1492150606.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:46.549Z,1492150606.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:46.571Z,1492150606.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:46.933Z,1492150606.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:46.960Z,1492150606.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:47.052Z,1492150607.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:47.333Z,1492150607.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:47.362Z,1492150607.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:47.737Z,1492150607.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:47.840Z,1492150607.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:47.850Z,1492150607.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:48.133Z,1492150608.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:48.167Z,1492150608.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:48.256Z,1492150608.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:48.530Z,1492150608.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:48.558Z,1492150608.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:48.933Z,1492150608.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:48.970Z,1492150608.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:49.052Z,1492150609.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:49.337Z,1492150609.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:49.370Z,1492150609.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:49.738Z,1492150609.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:49.754Z,1492150609.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:49.848Z,1492150609.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:50.136Z,1492150610.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:50.160Z,1492150610.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:50.252Z,1492150610.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:50.542Z,1492150610.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:50.566Z,1492150610.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:50.940Z,1492150610.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:50.956Z,1492150610.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:51.048Z,1492150611.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:51.354Z,1492150611.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:51.370Z,1492150611.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:51.733Z,1492150611.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:51.770Z,1492150611.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:51.845Z,1492150611.845 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:52.133Z,1492150612.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:52.166Z,1492150612.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:52.253Z,1492150612.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:52.541Z,1492150612.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:52.572Z,1492150612.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:52.941Z,1492150612.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:52.965Z,1492150612.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:53.048Z,1492150613.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:53.338Z,1492150613.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:53.354Z,1492150613.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:53.734Z,1492150613.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:53.761Z,1492150613.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:53.844Z,1492150613.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:54.133Z,1492150614.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:54.160Z,1492150614.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:54.248Z,1492150614.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:54.533Z,1492150614.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:54.571Z,1492150614.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:54.933Z,1492150614.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:54.972Z,1492150614.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:55.044Z,1492150615.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:55.337Z,1492150615.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:55.365Z,1492150615.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:55.740Z,1492150615.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:55.765Z,1492150615.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:55.840Z,1492150615.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:56.139Z,1492150616.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:56.156Z,1492150616.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:56.244Z,1492150616.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:56.541Z,1492150616.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:56.638Z,1492150616.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:56.946Z,1492150616.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:56.967Z,1492150616.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:57.040Z,1492150617.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:57.333Z,1492150617.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:57.360Z,1492150617.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:57.733Z,1492150617.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:57.807Z,1492150617.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:57.865Z,1492150617.865 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:58.146Z,1492150618.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:58.162Z,1492150618.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:58.268Z,1492150618.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:58.533Z,1492150618.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:58.587Z,1492150618.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:58.938Z,1492150618.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:59.008Z,1492150619.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:59.064Z,1492150619.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:59.337Z,1492150619.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:59.364Z,1492150619.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:59.733Z,1492150619.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:16:59.830Z,1492150619.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:16:59.860Z,1492150619.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:00.133Z,1492150620.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:00.161Z,1492150620.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:00.264Z,1492150620.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:00.533Z,1492150620.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:00.567Z,1492150620.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:00.934Z,1492150620.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:00.970Z,1492150620.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:01.060Z,1492150621.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:01.337Z,1492150621.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:01.362Z,1492150621.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:01.747Z,1492150621.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:01.862Z,1492150621.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:01.880Z,1492150621.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:02.142Z,1492150622.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:02.158Z,1492150622.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:02.269Z,1492150622.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:02.541Z,1492150622.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:02.562Z,1492150622.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:02.931Z,1492150622.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:02.959Z,1492150622.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:03.064Z,1492150623.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:03.333Z,1492150623.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:03.366Z,1492150623.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:03.733Z,1492150623.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:03.775Z,1492150623.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:03.876Z,1492150623.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:04.143Z,1492150624.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:04.176Z,1492150624.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:04.280Z,1492150624.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:04.543Z,1492150624.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:04.570Z,1492150624.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:04.957Z,1492150624.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:04.973Z,1492150624.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:05.076Z,1492150625.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:05.330Z,1492150625.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:05.361Z,1492150625.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:05.735Z,1492150625.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:05.782Z,1492150625.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:05.872Z,1492150625.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:06.169Z,1492150626.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:06.195Z,1492150626.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:06.276Z,1492150626.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:06.544Z,1492150626.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:06.593Z,1492150626.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:06.943Z,1492150626.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:06.959Z,1492150626.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:07.073Z,1492150627.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:07.342Z,1492150627.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:07.359Z,1492150627.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:07.757Z,1492150627.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:07.773Z,1492150627.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:07.860Z,1492150627.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:08.135Z,1492150628.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:08.169Z,1492150628.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:08.533Z,1492150628.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:08.565Z,1492150628.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:08.656Z,1492150628.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:08.933Z,1492150628.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:08.961Z,1492150628.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:08.978Z,1492150628.978 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:17:08.978Z,1492150628.978 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:17:08.979Z,1492150628.978 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:17:08.979Z,1492150628.979 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:17:09.338Z,1492150629.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:09.373Z,1492150629.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:09.452Z,1492150629.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:09.458Z,1492150629.458 [Default:CheckIn:D] Stopped
2017-04-14T06:17:09.458Z,1492150629.458 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:17:09.745Z,1492150629.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:09.766Z,1492150629.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 171.068994 min 
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn:E] Stopped
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn] Stopped
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:17:09.801Z,1492150629.801 [Default:CheckIn](INFO): Running loop #25
2017-04-14T06:17:09.802Z,1492150629.802 [Default:CheckIn] Running Loop=25
2017-04-14T06:17:09.802Z,1492150629.802 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:17:09.802Z,1492150629.802 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:17:09.856Z,1492150629.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:10.140Z,1492150630.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:10.156Z,1492150630.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:10.652Z,1492150630.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:11.450Z,1492150631.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:11.900Z,1492150631.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:12.696Z,1492150632.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:13.492Z,1492150633.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:13.548Z,1492150633.548 [NAL9602](INFO): Powering up
2017-04-14T06:17:13.565Z,1492150633.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:13.642Z,1492150633.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:13.822Z,1492150633.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:13.858Z,1492150633.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:14.133Z,1492150634.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:14.148Z,1492150634.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:14.184Z,1492150634.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:14.529Z,1492150634.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:14.578Z,1492150634.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:14.929Z,1492150634.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:14.946Z,1492150634.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:14.980Z,1492150634.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:15.325Z,1492150635.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:15.366Z,1492150635.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:15.776Z,1492150635.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:15.812Z,1492150635.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:15.868Z,1492150635.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:16.130Z,1492150636.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:16.146Z,1492150636.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:16.188Z,1492150636.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:16.528Z,1492150636.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:16.550Z,1492150636.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:16.921Z,1492150636.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:16.959Z,1492150636.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:16.984Z,1492150636.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:17.329Z,1492150637.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:17.360Z,1492150637.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:17.730Z,1492150637.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:17.746Z,1492150637.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:17.780Z,1492150637.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:18.129Z,1492150638.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:18.166Z,1492150638.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:18.184Z,1492150638.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:18.186Z,1492150638.186 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:18.186Z,1492150638.186 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:17:18.186Z,1492150638.187 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:17:18.220Z,1492150638.220 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:17:18.527Z,1492150638.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:18.558Z,1492150638.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:18.603Z,1492150638.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:17:18.604Z,1492150638.603 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:17:18.929Z,1492150638.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:18.945Z,1492150638.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:18.951Z,1492150638.951 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:17:18.951Z,1492150638.951 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:17:18.951Z,1492150638.951 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:17:18.980Z,1492150638.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:19.339Z,1492150639.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:19.354Z,1492150639.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:19.721Z,1492150639.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:19.737Z,1492150639.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:19.776Z,1492150639.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:20.126Z,1492150640.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:20.158Z,1492150640.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:20.180Z,1492150640.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:20.522Z,1492150640.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:20.560Z,1492150640.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:20.922Z,1492150640.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:20.954Z,1492150640.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:20.976Z,1492150640.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:21.324Z,1492150641.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:21.428Z,1492150641.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:21.734Z,1492150641.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:21.766Z,1492150641.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:21.772Z,1492150641.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:22.134Z,1492150642.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:22.150Z,1492150642.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:22.176Z,1492150642.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:22.521Z,1492150642.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:22.548Z,1492150642.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:22.942Z,1492150642.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:22.961Z,1492150642.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:22.972Z,1492150642.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:23.345Z,1492150643.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:23.439Z,1492150643.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:23.721Z,1492150643.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:23.737Z,1492150643.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:23.768Z,1492150643.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:24.140Z,1492150644.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:24.172Z,1492150644.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:24.175Z,1492150644.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:24.510Z,1492150644.510 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:17:24.527Z,1492150644.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:24.543Z,1492150644.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:24.927Z,1492150644.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:24.943Z,1492150644.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:24.968Z,1492150644.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:25.340Z,1492150645.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:25.372Z,1492150645.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:25.749Z,1492150645.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:25.764Z,1492150645.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:25.769Z,1492150645.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:26.136Z,1492150646.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:26.162Z,1492150646.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:26.168Z,1492150646.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:26.538Z,1492150646.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:26.566Z,1492150646.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:26.929Z,1492150646.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:26.964Z,1492150646.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:26.965Z,1492150646.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:27.340Z,1492150647.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:27.370Z,1492150647.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:27.760Z,1492150647.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:27.784Z,1492150647.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:27.891Z,1492150647.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:28.132Z,1492150648.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:28.212Z,1492150648.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:28.216Z,1492150648.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:28.522Z,1492150648.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:28.567Z,1492150648.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:28.925Z,1492150648.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:28.978Z,1492150648.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:29.012Z,1492150649.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:29.325Z,1492150649.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:29.358Z,1492150649.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:29.792Z,1492150649.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:29.809Z,1492150649.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:29.843Z,1492150649.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:30.125Z,1492150650.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:30.157Z,1492150650.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:30.226Z,1492150650.226 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:30.522Z,1492150650.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:30.574Z,1492150650.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:30.925Z,1492150650.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:30.959Z,1492150650.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:31.021Z,1492150651.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:31.330Z,1492150651.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:31.437Z,1492150651.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:31.732Z,1492150651.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:31.748Z,1492150651.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:31.816Z,1492150651.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:32.125Z,1492150652.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:32.154Z,1492150652.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:32.220Z,1492150652.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:32.545Z,1492150652.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:32.566Z,1492150652.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:32.945Z,1492150652.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:32.961Z,1492150652.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:33.016Z,1492150653.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:33.410Z,1492150653.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:33.468Z,1492150653.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:33.719Z,1492150653.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:33.749Z,1492150653.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:33.812Z,1492150653.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:34.129Z,1492150654.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:34.169Z,1492150654.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:34.216Z,1492150654.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:34.521Z,1492150654.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:34.537Z,1492150654.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:34.928Z,1492150654.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:34.945Z,1492150654.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:35.012Z,1492150655.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:35.328Z,1492150655.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:35.420Z,1492150655.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:35.729Z,1492150655.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:35.745Z,1492150655.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:35.808Z,1492150655.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:36.130Z,1492150656.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:36.146Z,1492150656.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:36.212Z,1492150656.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:36.525Z,1492150656.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:36.548Z,1492150656.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:36.944Z,1492150656.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:36.960Z,1492150656.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:37.008Z,1492150657.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:37.354Z,1492150657.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:37.436Z,1492150657.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:37.738Z,1492150657.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:37.758Z,1492150657.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:37.804Z,1492150657.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:38.121Z,1492150658.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:38.154Z,1492150658.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:38.208Z,1492150658.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:38.521Z,1492150658.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:38.557Z,1492150658.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:38.921Z,1492150658.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:38.959Z,1492150658.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:39.004Z,1492150659.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:39.321Z,1492150659.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:39.357Z,1492150659.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:39.721Z,1492150659.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:39.758Z,1492150659.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:39.800Z,1492150659.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:40.129Z,1492150660.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:40.164Z,1492150660.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:40.204Z,1492150660.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:40.529Z,1492150660.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:40.566Z,1492150660.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:40.966Z,1492150660.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:40.986Z,1492150660.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:40.000Z,1492150661.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:41.323Z,1492150661.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:41.339Z,1492150661.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:41.762Z,1492150661.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:41.790Z,1492150661.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:41.798Z,1492150661.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:42.122Z,1492150662.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:42.157Z,1492150662.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:42.204Z,1492150662.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:42.521Z,1492150662.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:42.601Z,1492150662.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:42.930Z,1492150662.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:42.946Z,1492150662.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:42.000Z,1492150663.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:43.331Z,1492150663.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:43.375Z,1492150663.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:43.770Z,1492150663.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:43.786Z,1492150663.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:43.798Z,1492150663.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:44.133Z,1492150664.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:44.199Z,1492150664.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:44.204Z,1492150664.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:44.533Z,1492150664.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:44.576Z,1492150664.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:44.929Z,1492150664.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:44.950Z,1492150664.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:45.000Z,1492150665.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:45.352Z,1492150665.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:45.454Z,1492150665.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:45.730Z,1492150665.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:45.750Z,1492150665.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:45.798Z,1492150665.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:46.129Z,1492150666.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:46.145Z,1492150666.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:46.204Z,1492150666.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:46.528Z,1492150666.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:46.550Z,1492150666.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:46.940Z,1492150666.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:46.000Z,1492150667.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:47.001Z,1492150667.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:47.375Z,1492150667.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:47.471Z,1492150667.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:47.728Z,1492150667.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:47.758Z,1492150667.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:47.798Z,1492150667.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:48.121Z,1492150668.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:48.154Z,1492150668.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:48.204Z,1492150668.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:48.534Z,1492150668.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:48.558Z,1492150668.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:48.921Z,1492150668.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:48.947Z,1492150668.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:48.000Z,1492150669.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:49.339Z,1492150669.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:49.463Z,1492150669.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:49.725Z,1492150669.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:49.742Z,1492150669.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:49.824Z,1492150669.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:50.130Z,1492150670.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:50.146Z,1492150670.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:50.228Z,1492150670.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:50.521Z,1492150670.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:50.559Z,1492150670.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:50.559Z,1492150670.559 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:17:50.559Z,1492150670.559 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:17:50.565Z,1492150670.565 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:50.565Z,1492150670.565 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:17:50.566Z,1492150670.566 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:17:50.580Z,1492150670.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:17:50.580Z,1492150670.580 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:17:50.929Z,1492150670.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:50.975Z,1492150670.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:17:50.975Z,1492150670.976 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:17:50.976Z,1492150670.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:17:50.976Z,1492150670.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:17:51.026Z,1492150671.026 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:51.343Z,1492150671.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:51.422Z,1492150671.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:17:51.423Z,1492150671.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:17:51.423Z,1492150671.423 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:17:51.440Z,1492150671.440 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:17:51.440Z,1492150671.440 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:17:51.441Z,1492150671.441 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:17:51.730Z,1492150671.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:51.746Z,1492150671.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:51.798Z,1492150671.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:52.138Z,1492150672.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:52.154Z,1492150672.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:52.533Z,1492150672.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:52.554Z,1492150672.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:52.592Z,1492150672.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:52.921Z,1492150672.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:52.949Z,1492150672.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:53.321Z,1492150673.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:53.348Z,1492150673.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:53.390Z,1492150673.390 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:53.730Z,1492150673.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:53.746Z,1492150673.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:53.856Z,1492150673.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:54.129Z,1492150674.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:54.145Z,1492150674.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:54.534Z,1492150674.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:54.558Z,1492150674.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:54.653Z,1492150674.653 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:54.948Z,1492150674.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:54.964Z,1492150674.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:55.306Z,1492150675.306 [NAL9602](INFO): SBD MO Status=2, MOMSN=2118, MT Status=2, MTMSN=0
2017-04-14T06:17:55.306Z,1492150675.306 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:17:55.323Z,1492150675.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:55.373Z,1492150675.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:55.448Z,1492150675.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:55.763Z,1492150675.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:55.805Z,1492150675.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:56.120Z,1492150676.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:56.126Z,1492150676.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:56.204Z,1492150676.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:56.521Z,1492150676.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:56.558Z,1492150676.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:56.918Z,1492150676.918 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:56.930Z,1492150676.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:56.986Z,1492150676.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:57.331Z,1492150677.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:57.346Z,1492150677.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:57.712Z,1492150677.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:57.773Z,1492150677.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:57.789Z,1492150677.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:58.116Z,1492150678.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:58.138Z,1492150678.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:58.194Z,1492150678.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:58.533Z,1492150678.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:58.554Z,1492150678.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:58.923Z,1492150678.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:58.934Z,1492150678.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:58.981Z,1492150678.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:59.374Z,1492150679.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:59.450Z,1492150679.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:17:59.720Z,1492150679.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:59.739Z,1492150679.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:17:59.773Z,1492150679.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:00.124Z,1492150680.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:00.168Z,1492150680.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:00.183Z,1492150680.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:00.540Z,1492150680.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:00.573Z,1492150680.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:00.921Z,1492150680.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:00.945Z,1492150680.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:00.973Z,1492150680.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:01.392Z,1492150681.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:01.430Z,1492150681.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:01.718Z,1492150681.718 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:01.733Z,1492150681.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:01.769Z,1492150681.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:02.124Z,1492150682.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:02.135Z,1492150682.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:02.151Z,1492150682.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:02.529Z,1492150682.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:02.545Z,1492150682.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:02.920Z,1492150682.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:02.935Z,1492150682.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:02.952Z,1492150682.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:03.400Z,1492150683.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:03.438Z,1492150683.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:03.716Z,1492150683.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:03.722Z,1492150683.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:03.746Z,1492150683.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:04.122Z,1492150684.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:04.134Z,1492150684.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:04.164Z,1492150684.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:04.521Z,1492150684.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:04.562Z,1492150684.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:04.916Z,1492150684.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:04.954Z,1492150684.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:04.970Z,1492150684.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:05.405Z,1492150685.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:05.448Z,1492150685.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:05.712Z,1492150685.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:05.735Z,1492150685.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:05.763Z,1492150685.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:06.116Z,1492150686.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:06.133Z,1492150686.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:06.158Z,1492150686.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:06.521Z,1492150686.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:06.555Z,1492150686.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:06.912Z,1492150686.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:06.955Z,1492150686.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:06.971Z,1492150686.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:07.413Z,1492150687.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:07.443Z,1492150687.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:07.709Z,1492150687.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:07.742Z,1492150687.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:07.766Z,1492150687.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:08.112Z,1492150688.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:08.131Z,1492150688.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:08.165Z,1492150688.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:08.522Z,1492150688.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:08.564Z,1492150688.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:08.908Z,1492150688.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:08.924Z,1492150688.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:08.954Z,1492150688.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:09.326Z,1492150689.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:09.368Z,1492150689.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:09.704Z,1492150689.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:09.728Z,1492150689.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:09.786Z,1492150689.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:10.108Z,1492150690.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:10.135Z,1492150690.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:10.152Z,1492150690.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:10.531Z,1492150690.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:10.554Z,1492150690.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:10.904Z,1492150690.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:11.700Z,1492150691.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:12.104Z,1492150692.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:12.900Z,1492150692.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:13.696Z,1492150693.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:14.094Z,1492150694.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:14.100Z,1492150694.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:14.190Z,1492150694.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:14.291Z,1492150694.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:14.311Z,1492150694.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:14.690Z,1492150694.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:14.705Z,1492150694.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:14.896Z,1492150694.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:15.094Z,1492150695.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:15.149Z,1492150695.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:15.508Z,1492150695.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:15.539Z,1492150695.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:15.692Z,1492150695.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:15.904Z,1492150695.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:15.950Z,1492150695.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:16.096Z,1492150696.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:16.296Z,1492150696.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:16.353Z,1492150696.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:16.677Z,1492150696.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:16.714Z,1492150696.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:16.892Z,1492150696.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:17.077Z,1492150697.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:17.104Z,1492150697.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:17.477Z,1492150697.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:17.505Z,1492150697.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:17.688Z,1492150697.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:17.879Z,1492150697.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:17.916Z,1492150697.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:18.092Z,1492150698.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:18.277Z,1492150698.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:18.303Z,1492150698.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:18.695Z,1492150698.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:18.711Z,1492150698.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:18.888Z,1492150698.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:19.077Z,1492150699.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:19.104Z,1492150699.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:19.477Z,1492150699.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:19.511Z,1492150699.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:19.685Z,1492150699.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:19.900Z,1492150699.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:19.920Z,1492150699.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:20.092Z,1492150700.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:20.300Z,1492150700.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:20.316Z,1492150700.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:20.681Z,1492150700.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:20.708Z,1492150700.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:20.888Z,1492150700.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:21.081Z,1492150701.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:21.109Z,1492150701.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:21.477Z,1492150701.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:21.504Z,1492150701.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:21.685Z,1492150701.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:21.895Z,1492150701.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:21.911Z,1492150701.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:22.092Z,1492150702.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:22.278Z,1492150702.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:22.306Z,1492150702.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:22.678Z,1492150702.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:22.714Z,1492150702.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:22.888Z,1492150702.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:23.078Z,1492150703.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:23.115Z,1492150703.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:23.482Z,1492150703.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:23.518Z,1492150703.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:23.684Z,1492150703.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:23.918Z,1492150703.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:23.938Z,1492150703.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:24.088Z,1492150704.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:24.297Z,1492150704.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:24.323Z,1492150704.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:24.682Z,1492150704.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:24.698Z,1492150704.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:24.884Z,1492150704.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:25.086Z,1492150705.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:25.103Z,1492150705.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:25.486Z,1492150705.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:25.502Z,1492150705.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:25.680Z,1492150705.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:25.887Z,1492150705.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:25.903Z,1492150705.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:26.084Z,1492150706.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:26.287Z,1492150706.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:26.303Z,1492150706.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:26.691Z,1492150706.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:26.706Z,1492150706.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:26.880Z,1492150706.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:27.090Z,1492150707.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:27.106Z,1492150707.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:27.487Z,1492150707.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:27.503Z,1492150707.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:27.677Z,1492150707.677 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:27.897Z,1492150707.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:27.914Z,1492150707.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:28.084Z,1492150708.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:28.292Z,1492150708.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:28.360Z,1492150708.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:28.677Z,1492150708.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:28.711Z,1492150708.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:28.880Z,1492150708.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:29.077Z,1492150709.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:29.110Z,1492150709.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:29.477Z,1492150709.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:29.530Z,1492150709.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:29.676Z,1492150709.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:29.897Z,1492150709.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:29.913Z,1492150709.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:30.080Z,1492150710.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:30.277Z,1492150710.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:30.330Z,1492150710.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:30.681Z,1492150710.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:30.732Z,1492150710.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:30.876Z,1492150710.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:31.081Z,1492150711.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:31.114Z,1492150711.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:31.498Z,1492150711.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:31.513Z,1492150711.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:31.672Z,1492150711.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:31.877Z,1492150711.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:31.914Z,1492150711.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:32.076Z,1492150712.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:32.280Z,1492150712.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:32.314Z,1492150712.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:32.700Z,1492150712.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:32.716Z,1492150712.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:32.872Z,1492150712.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:33.100Z,1492150713.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:33.115Z,1492150713.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:33.477Z,1492150713.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:33.510Z,1492150713.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:33.668Z,1492150713.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:33.900Z,1492150713.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:33.915Z,1492150713.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:34.072Z,1492150714.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:34.277Z,1492150714.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:34.310Z,1492150714.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:34.681Z,1492150714.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:34.714Z,1492150714.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:34.868Z,1492150714.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:35.077Z,1492150715.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:35.109Z,1492150715.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:35.477Z,1492150715.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:35.510Z,1492150715.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:35.664Z,1492150715.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:35.898Z,1492150715.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:35.918Z,1492150715.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:36.068Z,1492150716.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:36.281Z,1492150716.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:36.314Z,1492150716.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:36.677Z,1492150716.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:36.710Z,1492150716.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:36.864Z,1492150716.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:37.081Z,1492150717.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:37.114Z,1492150717.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:37.477Z,1492150717.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:37.514Z,1492150717.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:37.660Z,1492150717.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:37.877Z,1492150717.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:37.914Z,1492150717.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:38.064Z,1492150718.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:38.277Z,1492150718.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:38.310Z,1492150718.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:38.677Z,1492150718.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:38.714Z,1492150718.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:38.861Z,1492150718.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:39.082Z,1492150719.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:39.113Z,1492150719.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:39.487Z,1492150719.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:39.503Z,1492150719.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:39.656Z,1492150719.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:39.886Z,1492150719.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:39.910Z,1492150719.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:40.060Z,1492150720.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:40.286Z,1492150720.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:40.302Z,1492150720.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:40.691Z,1492150720.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:40.707Z,1492150720.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:40.859Z,1492150720.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:41.085Z,1492150721.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:41.106Z,1492150721.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:41.486Z,1492150721.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:41.502Z,1492150721.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:41.656Z,1492150721.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:41.908Z,1492150721.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:41.940Z,1492150721.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:42.060Z,1492150722.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:42.300Z,1492150722.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:42.316Z,1492150722.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:42.690Z,1492150722.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:42.714Z,1492150722.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:42.857Z,1492150722.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:43.089Z,1492150723.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:43.162Z,1492150723.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:43.501Z,1492150723.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:43.517Z,1492150723.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:43.652Z,1492150723.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:43.877Z,1492150723.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:43.922Z,1492150723.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:44.056Z,1492150724.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:44.281Z,1492150724.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:44.314Z,1492150724.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:44.677Z,1492150724.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:44.726Z,1492150724.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:44.852Z,1492150724.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:45.081Z,1492150725.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:45.127Z,1492150725.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:45.477Z,1492150725.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:45.514Z,1492150725.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:45.648Z,1492150725.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:45.900Z,1492150725.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:45.922Z,1492150725.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:46.052Z,1492150726.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:46.287Z,1492150726.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:46.314Z,1492150726.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:46.695Z,1492150726.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:46.711Z,1492150726.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:46.848Z,1492150726.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:47.093Z,1492150727.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:47.109Z,1492150727.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:47.486Z,1492150727.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:47.506Z,1492150727.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:47.644Z,1492150727.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:47.884Z,1492150727.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:47.912Z,1492150727.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:48.048Z,1492150728.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:48.281Z,1492150728.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:48.308Z,1492150728.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:48.677Z,1492150728.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:48.710Z,1492150728.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:48.844Z,1492150728.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:49.081Z,1492150729.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:49.108Z,1492150729.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:49.477Z,1492150729.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:49.504Z,1492150729.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:49.640Z,1492150729.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:49.877Z,1492150729.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:49.913Z,1492150729.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:50.044Z,1492150730.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:50.277Z,1492150730.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:50.330Z,1492150730.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:50.685Z,1492150730.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:50.712Z,1492150730.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:50.841Z,1492150730.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:51.101Z,1492150731.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:51.118Z,1492150731.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:51.501Z,1492150731.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:51.516Z,1492150731.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:51.636Z,1492150731.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:51.884Z,1492150731.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:51.906Z,1492150731.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:52.040Z,1492150732.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:52.287Z,1492150732.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:52.303Z,1492150732.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:52.689Z,1492150732.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:52.706Z,1492150732.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:52.836Z,1492150732.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:53.095Z,1492150733.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:53.111Z,1492150733.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:53.486Z,1492150733.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:53.506Z,1492150733.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:53.632Z,1492150733.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:53.883Z,1492150733.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:53.912Z,1492150733.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:54.036Z,1492150734.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:54.285Z,1492150734.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:54.302Z,1492150734.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:54.684Z,1492150734.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:54.729Z,1492150734.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:54.832Z,1492150734.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:55.086Z,1492150735.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:55.107Z,1492150735.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:55.495Z,1492150735.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:55.512Z,1492150735.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:55.629Z,1492150735.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:55.877Z,1492150735.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:55.904Z,1492150735.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:56.036Z,1492150736.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:56.286Z,1492150736.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:56.302Z,1492150736.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:56.698Z,1492150736.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:56.714Z,1492150736.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:56.833Z,1492150736.833 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:57.077Z,1492150737.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:57.114Z,1492150737.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:57.477Z,1492150737.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:57.531Z,1492150737.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:57.628Z,1492150737.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:57.908Z,1492150737.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:57.924Z,1492150737.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:58.032Z,1492150738.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:58.278Z,1492150738.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:58.326Z,1492150738.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:58.678Z,1492150738.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:58.717Z,1492150738.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:58.828Z,1492150738.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:59.079Z,1492150739.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:59.130Z,1492150739.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:59.483Z,1492150739.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:59.523Z,1492150739.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:18:59.624Z,1492150739.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:59.887Z,1492150739.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:18:59.903Z,1492150739.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:00.028Z,1492150740.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:00.289Z,1492150740.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:00.310Z,1492150740.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:00.687Z,1492150740.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:00.710Z,1492150740.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:00.824Z,1492150740.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:01.089Z,1492150741.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:01.110Z,1492150741.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:01.486Z,1492150741.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:01.503Z,1492150741.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:01.620Z,1492150741.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:01.891Z,1492150741.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:01.907Z,1492150741.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:02.024Z,1492150742.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:02.283Z,1492150742.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:02.312Z,1492150742.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:02.690Z,1492150742.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:02.706Z,1492150742.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:02.820Z,1492150742.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:03.077Z,1492150743.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:03.105Z,1492150743.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:03.477Z,1492150743.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:03.510Z,1492150743.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:03.616Z,1492150743.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:03.877Z,1492150743.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:03.915Z,1492150743.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:04.020Z,1492150744.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:04.292Z,1492150744.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:04.307Z,1492150744.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:04.675Z,1492150744.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:04.707Z,1492150744.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:04.816Z,1492150744.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:05.077Z,1492150745.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:05.114Z,1492150745.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:05.481Z,1492150745.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:05.515Z,1492150745.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:05.612Z,1492150745.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:05.878Z,1492150745.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:05.927Z,1492150745.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:06.016Z,1492150746.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:06.287Z,1492150746.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:06.303Z,1492150746.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:06.696Z,1492150746.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:06.748Z,1492150746.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:06.812Z,1492150746.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:07.087Z,1492150747.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:07.134Z,1492150747.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:07.487Z,1492150747.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:07.503Z,1492150747.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:07.608Z,1492150747.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:07.901Z,1492150747.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:07.956Z,1492150747.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:08.024Z,1492150748.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:08.286Z,1492150748.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:08.302Z,1492150748.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:08.677Z,1492150748.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:08.714Z,1492150748.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:08.820Z,1492150748.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:09.077Z,1492150749.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:09.105Z,1492150749.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:09.482Z,1492150749.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:09.520Z,1492150749.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:09.616Z,1492150749.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:09.906Z,1492150749.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:09.922Z,1492150749.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:10.020Z,1492150750.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:10.285Z,1492150750.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:10.359Z,1492150750.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:10.679Z,1492150750.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:10.703Z,1492150750.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:10.816Z,1492150750.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:11.612Z,1492150751.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:12.016Z,1492150752.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:12.812Z,1492150752.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:13.608Z,1492150753.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:14.012Z,1492150754.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:14.228Z,1492150754.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:14.283Z,1492150754.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:14.388Z,1492150754.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:14.438Z,1492150754.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:14.749Z,1492150754.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:14.803Z,1492150754.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:14.808Z,1492150754.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:15.126Z,1492150755.126 [NAL9602](INFO): SBD MO Status=2, MOMSN=2118, MT Status=2, MTMSN=0
2017-04-14T06:19:15.126Z,1492150755.126 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:19:15.162Z,1492150755.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:15.269Z,1492150755.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:15.555Z,1492150755.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:15.571Z,1492150755.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:15.604Z,1492150755.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:15.947Z,1492150755.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:15.970Z,1492150755.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:16.008Z,1492150756.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:16.337Z,1492150756.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:16.366Z,1492150756.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:16.749Z,1492150756.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:16.770Z,1492150756.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:16.804Z,1492150756.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:17.154Z,1492150757.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:17.169Z,1492150757.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:17.538Z,1492150757.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:17.553Z,1492150757.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:17.600Z,1492150757.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:17.939Z,1492150757.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:17.984Z,1492150757.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:18.004Z,1492150758.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:18.347Z,1492150758.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:18.363Z,1492150758.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:18.746Z,1492150758.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:18.761Z,1492150758.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:18.800Z,1492150758.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:19.151Z,1492150759.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:19.167Z,1492150759.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:19.597Z,1492150759.597 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:19.604Z,1492150759.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:19.674Z,1492150759.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:19.949Z,1492150759.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:19.964Z,1492150759.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:20.020Z,1492150760.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:20.337Z,1492150760.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:20.370Z,1492150760.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:20.753Z,1492150760.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:20.769Z,1492150760.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:20.816Z,1492150760.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:21.148Z,1492150761.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:21.163Z,1492150761.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:21.612Z,1492150761.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:21.689Z,1492150761.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:21.756Z,1492150761.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:21.952Z,1492150761.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:21.990Z,1492150761.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:22.036Z,1492150762.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:22.345Z,1492150762.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:22.373Z,1492150762.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:22.746Z,1492150762.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:22.766Z,1492150762.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:22.832Z,1492150762.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:23.154Z,1492150763.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:23.210Z,1492150763.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:23.537Z,1492150763.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:23.552Z,1492150763.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:23.628Z,1492150763.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:23.945Z,1492150763.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:23.966Z,1492150763.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:24.032Z,1492150764.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:24.347Z,1492150764.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:24.363Z,1492150764.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:24.746Z,1492150764.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:24.761Z,1492150764.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:24.828Z,1492150764.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:25.149Z,1492150765.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:25.165Z,1492150765.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:25.537Z,1492150765.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:25.553Z,1492150765.553 [BPC1](ERROR): Failed to parse message.
2017-04-14T06:19:25.554Z,1492150765.554 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:19:25.554Z,1492150765.554 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:19:25.554Z,1492150765.554 [BPC1](ERROR): Data Fault
2017-04-14T06:19:25.576Z,1492150765.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:25.615Z,1492150765.615 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:19:25.624Z,1492150765.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:25.967Z,1492150765.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:25.983Z,1492150765.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:26.028Z,1492150766.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:26.341Z,1492150766.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:26.378Z,1492150766.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:26.737Z,1492150766.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:26.780Z,1492150766.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:26.820Z,1492150766.820 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:19:26.820Z,1492150766.820 [BPC1] No Fault, FailCount= 1
2017-04-14T06:19:26.824Z,1492150766.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:27.137Z,1492150767.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:27.326Z,1492150767.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:27.549Z,1492150767.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:27.602Z,1492150767.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:27.620Z,1492150767.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:27.946Z,1492150767.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:27.966Z,1492150767.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:28.024Z,1492150768.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:28.346Z,1492150768.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:28.361Z,1492150768.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:28.744Z,1492150768.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:28.761Z,1492150768.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:28.820Z,1492150768.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:29.145Z,1492150769.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:29.231Z,1492150769.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:29.537Z,1492150769.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:29.572Z,1492150769.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:29.616Z,1492150769.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:29.937Z,1492150769.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:29.970Z,1492150769.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:30.020Z,1492150770.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:30.353Z,1492150770.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:30.374Z,1492150770.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:30.741Z,1492150770.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:30.772Z,1492150770.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:30.816Z,1492150770.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:31.122Z,1492150771.122 [NAL9602](INFO): SBD MO Status=2, MOMSN=2118, MT Status=2, MTMSN=0
2017-04-14T06:19:31.122Z,1492150771.122 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:19:31.139Z,1492150771.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:31.171Z,1492150771.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:31.570Z,1492150771.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:31.585Z,1492150771.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:31.624Z,1492150771.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:31.949Z,1492150771.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:31.987Z,1492150771.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:32.028Z,1492150772.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:32.338Z,1492150772.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:32.359Z,1492150772.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:32.745Z,1492150772.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:32.766Z,1492150772.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:32.824Z,1492150772.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:33.147Z,1492150773.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:33.162Z,1492150773.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:33.578Z,1492150773.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:33.618Z,1492150773.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:33.620Z,1492150773.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:33.937Z,1492150773.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:33.964Z,1492150773.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:34.024Z,1492150774.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:34.337Z,1492150774.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:34.372Z,1492150774.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:34.754Z,1492150774.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:34.771Z,1492150774.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:34.820Z,1492150774.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:35.155Z,1492150775.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:35.171Z,1492150775.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:35.597Z,1492150775.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:35.616Z,1492150775.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:35.632Z,1492150775.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:35.960Z,1492150775.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:35.987Z,1492150775.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:36.020Z,1492150776.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:36.344Z,1492150776.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:36.360Z,1492150776.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:36.748Z,1492150776.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:36.763Z,1492150776.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:36.816Z,1492150776.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:37.147Z,1492150777.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:37.241Z,1492150777.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:37.551Z,1492150777.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:37.566Z,1492150777.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:37.612Z,1492150777.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:37.942Z,1492150777.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:37.966Z,1492150777.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:38.016Z,1492150778.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:38.361Z,1492150778.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:38.425Z,1492150778.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:38.765Z,1492150778.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:38.812Z,1492150778.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:38.834Z,1492150778.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:39.182Z,1492150779.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:39.275Z,1492150779.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:39.561Z,1492150779.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:39.608Z,1492150779.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:39.616Z,1492150779.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:39.937Z,1492150779.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:39.974Z,1492150779.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:40.012Z,1492150780.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:40.341Z,1492150780.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:40.390Z,1492150780.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:40.739Z,1492150780.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:40.808Z,1492150780.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:40.812Z,1492150780.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:41.169Z,1492150781.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:41.258Z,1492150781.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:41.544Z,1492150781.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:41.559Z,1492150781.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:41.604Z,1492150781.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:41.948Z,1492150781.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:41.970Z,1492150781.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:42.008Z,1492150782.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:42.347Z,1492150782.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:42.366Z,1492150782.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:42.748Z,1492150782.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:42.763Z,1492150782.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:42.804Z,1492150782.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:43.179Z,1492150783.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:43.259Z,1492150783.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:43.558Z,1492150783.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:43.577Z,1492150783.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:43.600Z,1492150783.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:43.959Z,1492150783.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:43.986Z,1492150783.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:44.004Z,1492150784.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:44.339Z,1492150784.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:44.358Z,1492150784.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:44.741Z,1492150784.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:44.757Z,1492150784.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:44.800Z,1492150784.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:45.142Z,1492150785.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:45.178Z,1492150785.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:45.543Z,1492150785.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:45.568Z,1492150785.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:45.600Z,1492150785.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:45.959Z,1492150785.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:45.975Z,1492150785.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:46.004Z,1492150786.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:46.342Z,1492150786.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:46.372Z,1492150786.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:46.737Z,1492150786.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:46.776Z,1492150786.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:46.800Z,1492150786.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:47.169Z,1492150787.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:47.185Z,1492150787.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:47.584Z,1492150787.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:47.596Z,1492150787.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:47.629Z,1492150787.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:47.944Z,1492150787.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:47.960Z,1492150787.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:47.000Z,1492150788.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:48.349Z,1492150788.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:48.386Z,1492150788.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:48.746Z,1492150788.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:48.766Z,1492150788.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:48.796Z,1492150788.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:49.145Z,1492150789.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:49.160Z,1492150789.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:49.577Z,1492150789.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:49.592Z,1492150789.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:49.638Z,1492150789.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:49.938Z,1492150789.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:49.970Z,1492150789.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:49.996Z,1492150789.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:50.342Z,1492150790.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:50.372Z,1492150790.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:50.746Z,1492150790.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:50.775Z,1492150790.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:50.792Z,1492150790.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:51.182Z,1492150791.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:51.258Z,1492150791.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:51.548Z,1492150791.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:51.588Z,1492150791.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:51.636Z,1492150791.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:51.939Z,1492150791.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:51.975Z,1492150791.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:51.992Z,1492150791.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:52.337Z,1492150792.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:52.353Z,1492150792.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:52.746Z,1492150792.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:52.792Z,1492150792.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:52.805Z,1492150792.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:53.210Z,1492150793.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:53.276Z,1492150793.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:53.588Z,1492150793.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:53.590Z,1492150793.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:53.655Z,1492150793.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:53.946Z,1492150793.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:53.992Z,1492150793.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:53.000Z,1492150794.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:54.344Z,1492150794.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:54.359Z,1492150794.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:54.745Z,1492150794.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:54.766Z,1492150794.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:54.788Z,1492150794.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:55.192Z,1492150795.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:55.225Z,1492150795.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:55.545Z,1492150795.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:55.584Z,1492150795.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:55.589Z,1492150795.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:55.952Z,1492150795.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:55.986Z,1492150795.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:55.988Z,1492150795.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:56.348Z,1492150796.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:56.382Z,1492150796.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:56.741Z,1492150796.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:56.779Z,1492150796.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:56.784Z,1492150796.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:57.191Z,1492150797.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:57.253Z,1492150797.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:57.538Z,1492150797.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:57.560Z,1492150797.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:57.580Z,1492150797.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:57.949Z,1492150797.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:57.970Z,1492150797.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:57.984Z,1492150797.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:58.346Z,1492150798.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:58.361Z,1492150798.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:58.743Z,1492150798.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:58.758Z,1492150798.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:58.788Z,1492150798.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:59.145Z,1492150799.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:59.264Z,1492150799.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:59.542Z,1492150799.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:59.562Z,1492150799.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:59.588Z,1492150799.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:59.943Z,1492150799.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:19:59.959Z,1492150799.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:19:59.992Z,1492150799.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:00.360Z,1492150800.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:00.388Z,1492150800.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:00.764Z,1492150800.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:00.788Z,1492150800.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:00.795Z,1492150800.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:01.145Z,1492150801.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:01.161Z,1492150801.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:01.554Z,1492150801.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:01.569Z,1492150801.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:01.584Z,1492150801.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:01.953Z,1492150801.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:01.974Z,1492150801.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:01.992Z,1492150801.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:02.349Z,1492150802.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:02.368Z,1492150802.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:02.754Z,1492150802.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:02.774Z,1492150802.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:02.788Z,1492150802.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:03.155Z,1492150803.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:03.178Z,1492150803.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:03.565Z,1492150803.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:03.584Z,1492150803.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:03.586Z,1492150803.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:03.954Z,1492150803.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:03.974Z,1492150803.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:03.988Z,1492150803.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:04.370Z,1492150804.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:04.385Z,1492150804.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:04.752Z,1492150804.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:04.784Z,1492150804.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:04.853Z,1492150804.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:05.227Z,1492150805.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:05.251Z,1492150805.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:05.539Z,1492150805.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:05.580Z,1492150805.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:05.598Z,1492150805.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:05.938Z,1492150805.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:05.953Z,1492150805.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:06.345Z,1492150806.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:06.376Z,1492150806.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:06.396Z,1492150806.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:06.758Z,1492150806.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:06.823Z,1492150806.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:07.173Z,1492150807.173 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:07.216Z,1492150807.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:07.262Z,1492150807.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:07.554Z,1492150807.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:07.571Z,1492150807.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:07.612Z,1492150807.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:07.937Z,1492150807.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:07.977Z,1492150807.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:08.341Z,1492150808.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:08.368Z,1492150808.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:08.409Z,1492150808.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:08.747Z,1492150808.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:08.778Z,1492150808.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:09.193Z,1492150809.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:09.204Z,1492150809.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:09.245Z,1492150809.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:09.537Z,1492150809.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:09.579Z,1492150809.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:09.617Z,1492150809.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:09.937Z,1492150809.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:09.963Z,1492150809.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:10.354Z,1492150810.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:10.371Z,1492150810.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:10.412Z,1492150810.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:10.737Z,1492150810.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:10.774Z,1492150810.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:11.208Z,1492150811.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:11.613Z,1492150811.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:12.408Z,1492150812.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:13.208Z,1492150813.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:13.620Z,1492150813.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:14.283Z,1492150814.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:14.321Z,1492150814.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:14.418Z,1492150814.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:14.424Z,1492150814.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:14.440Z,1492150814.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:14.789Z,1492150814.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:14.830Z,1492150814.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:15.194Z,1492150815.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:15.212Z,1492150815.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:15.242Z,1492150815.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:15.586Z,1492150815.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:15.635Z,1492150815.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:15.896Z,1492150815.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:15.989Z,1492150815.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:16.031Z,1492150816.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:16.384Z,1492150816.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:16.416Z,1492150816.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:16.692Z,1492150816.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:16.788Z,1492150816.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:16.810Z,1492150816.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:17.190Z,1492150817.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:17.215Z,1492150817.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:17.490Z,1492150817.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:17.611Z,1492150817.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:17.712Z,1492150817.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:17.900Z,1492150817.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:18.006Z,1492150818.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:18.022Z,1492150818.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:18.390Z,1492150818.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:18.450Z,1492150818.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:18.696Z,1492150818.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:18.797Z,1492150818.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:18.816Z,1492150818.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:19.193Z,1492150819.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:19.258Z,1492150819.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:19.265Z,1492150819.265 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:19.265Z,1492150819.265 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T06:20:19.265Z,1492150819.265 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:20:19.279Z,1492150819.279 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:20:19.494Z,1492150819.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:19.587Z,1492150819.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:19.619Z,1492150819.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:19.654Z,1492150819.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:20:19.654Z,1492150819.654 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T06:20:19.902Z,1492150819.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:19.986Z,1492150819.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:20.046Z,1492150820.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:20.068Z,1492150820.068 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:20:20.068Z,1492150820.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:20:20.068Z,1492150820.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:20:20.379Z,1492150820.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:20.396Z,1492150820.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:20.696Z,1492150820.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:20.794Z,1492150820.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:20.828Z,1492150820.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:21.205Z,1492150821.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:21.235Z,1492150821.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:21.492Z,1492150821.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:21.601Z,1492150821.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:21.642Z,1492150821.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:21.896Z,1492150821.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:21.984Z,1492150821.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:22.000Z,1492150822.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:22.387Z,1492150822.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:22.427Z,1492150822.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:22.692Z,1492150822.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:22.809Z,1492150822.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:22.842Z,1492150822.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:23.184Z,1492150823.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:23.281Z,1492150823.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:23.488Z,1492150823.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:23.591Z,1492150823.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:23.614Z,1492150823.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:23.892Z,1492150823.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:24.037Z,1492150824.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:24.060Z,1492150824.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:24.409Z,1492150824.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:24.433Z,1492150824.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:24.689Z,1492150824.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:24.772Z,1492150824.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:24.823Z,1492150824.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:25.181Z,1492150825.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:25.228Z,1492150825.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:25.484Z,1492150825.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:25.583Z,1492150825.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:25.620Z,1492150825.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:25.888Z,1492150825.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:25.978Z,1492150825.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:26.022Z,1492150826.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:26.408Z,1492150826.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:26.432Z,1492150826.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:26.684Z,1492150826.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:26.788Z,1492150826.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:26.826Z,1492150826.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:27.234Z,1492150827.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:27.282Z,1492150827.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:27.480Z,1492150827.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:27.582Z,1492150827.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:27.636Z,1492150827.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:27.884Z,1492150827.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:27.989Z,1492150827.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:28.038Z,1492150828.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:28.390Z,1492150828.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:28.431Z,1492150828.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:28.680Z,1492150828.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:28.785Z,1492150828.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:28.809Z,1492150828.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:29.200Z,1492150829.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:29.256Z,1492150829.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:29.477Z,1492150829.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:29.582Z,1492150829.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:29.639Z,1492150829.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:29.916Z,1492150829.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:29.989Z,1492150829.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:30.018Z,1492150830.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:30.402Z,1492150830.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:30.469Z,1492150830.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:30.724Z,1492150830.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:30.805Z,1492150830.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:30.880Z,1492150830.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:31.188Z,1492150831.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:31.226Z,1492150831.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:31.520Z,1492150831.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:31.585Z,1492150831.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:31.622Z,1492150831.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:31.924Z,1492150831.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:31.977Z,1492150831.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:31.990Z,1492150831.990 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-04-14T06:20:32.060Z,1492150832.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:32.384Z,1492150832.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:32.395Z,1492150832.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x36115 got:0x43904
2017-04-14T06:20:32.440Z,1492150832.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:32.720Z,1492150832.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:32.783Z,1492150832.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:32.839Z,1492150832.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:33.186Z,1492150833.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:33.235Z,1492150833.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:33.512Z,1492150833.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:33.625Z,1492150833.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:33.644Z,1492150833.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:33.992Z,1492150833.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:34.008Z,1492150834.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:34.308Z,1492150834.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:34.385Z,1492150834.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:34.429Z,1492150834.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:34.786Z,1492150834.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:34.809Z,1492150834.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:35.106Z,1492150835.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:35.212Z,1492150835.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:35.238Z,1492150835.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:35.532Z,1492150835.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:35.580Z,1492150835.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:35.620Z,1492150835.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:35.989Z,1492150835.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:36.030Z,1492150836.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:36.328Z,1492150836.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:36.398Z,1492150836.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:36.404Z,1492150836.404 [PNI_TCM](ERROR): CRC does not match. Expected:0x25572 got:0x32563
2017-04-14T06:20:36.428Z,1492150836.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:36.782Z,1492150836.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:36.805Z,1492150836.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:37.126Z,1492150837.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:37.197Z,1492150837.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:37.225Z,1492150837.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:37.532Z,1492150837.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:37.587Z,1492150837.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:37.633Z,1492150837.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:37.999Z,1492150837.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:38.019Z,1492150838.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:38.393Z,1492150838.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:38.416Z,1492150838.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:38.792Z,1492150838.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:38.807Z,1492150838.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:39.204Z,1492150839.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:39.220Z,1492150839.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:39.607Z,1492150839.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:39.623Z,1492150839.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:39.982Z,1492150839.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:40.016Z,1492150840.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:40.324Z,1492150840.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:40.395Z,1492150840.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:40.411Z,1492150840.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:40.781Z,1492150840.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:40.822Z,1492150840.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:41.122Z,1492150841.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:41.215Z,1492150841.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:41.256Z,1492150841.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:41.586Z,1492150841.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:41.602Z,1492150841.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:41.604Z,1492150841.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:41.981Z,1492150841.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:41.998Z,1492150841.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:42.388Z,1492150842.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:42.422Z,1492150842.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:42.792Z,1492150842.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:42.824Z,1492150842.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:43.194Z,1492150843.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:43.231Z,1492150843.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:43.591Z,1492150843.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:43.653Z,1492150843.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:43.864Z,1492150843.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:43.994Z,1492150843.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:44.009Z,1492150844.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:44.390Z,1492150844.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:44.461Z,1492150844.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:44.660Z,1492150844.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:44.793Z,1492150844.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:44.814Z,1492150844.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:45.190Z,1492150845.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:45.234Z,1492150845.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:45.591Z,1492150845.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:45.618Z,1492150845.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:45.991Z,1492150845.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:46.047Z,1492150846.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:46.399Z,1492150846.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:46.447Z,1492150846.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:46.791Z,1492150846.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:46.807Z,1492150846.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:47.203Z,1492150847.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:47.219Z,1492150847.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:47.588Z,1492150847.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:47.651Z,1492150847.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:47.999Z,1492150847.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:48.015Z,1492150848.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:48.403Z,1492150848.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:48.418Z,1492150848.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:48.780Z,1492150848.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:48.810Z,1492150848.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:49.179Z,1492150849.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:49.206Z,1492150849.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:49.596Z,1492150849.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:49.620Z,1492150849.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:49.983Z,1492150849.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:50.019Z,1492150850.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:50.394Z,1492150850.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:50.441Z,1492150850.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:50.797Z,1492150850.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:50.838Z,1492150850.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:51.188Z,1492150851.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:51.203Z,1492150851.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:51.591Z,1492150851.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:51.607Z,1492150851.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:51.607Z,1492150851.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-04-14T06:20:51.607Z,1492150851.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:20:51.613Z,1492150851.613 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:51.613Z,1492150851.613 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-04-14T06:20:51.613Z,1492150851.613 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:20:51.656Z,1492150851.656 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:20:51.656Z,1492150851.656 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:20:52.023Z,1492150852.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:52.064Z,1492150852.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:20:52.064Z,1492150852.065 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-04-14T06:20:52.065Z,1492150852.065 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:20:52.065Z,1492150852.065 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-04-14T06:20:52.393Z,1492150852.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:52.407Z,1492150852.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:20:52.407Z,1492150852.407 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:20:52.407Z,1492150852.408 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:20:52.412Z,1492150852.412 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:20:52.412Z,1492150852.412 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:20:52.413Z,1492150852.413 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:20:52.799Z,1492150852.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:52.814Z,1492150852.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:53.198Z,1492150853.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:53.218Z,1492150853.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:53.591Z,1492150853.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:53.620Z,1492150853.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:53.984Z,1492150853.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:54.013Z,1492150854.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:54.386Z,1492150854.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:54.413Z,1492150854.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:54.778Z,1492150854.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:54.814Z,1492150854.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:55.203Z,1492150855.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:55.236Z,1492150855.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:55.590Z,1492150855.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:55.617Z,1492150855.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:55.989Z,1492150855.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:56.010Z,1492150856.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:56.409Z,1492150856.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:56.425Z,1492150856.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:56.810Z,1492150856.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:56.825Z,1492150856.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:57.181Z,1492150857.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:57.274Z,1492150857.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:57.581Z,1492150857.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:57.619Z,1492150857.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:57.977Z,1492150857.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:58.023Z,1492150858.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:58.385Z,1492150858.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:58.421Z,1492150858.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:58.652Z,1492150858.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:58.780Z,1492150858.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:58.823Z,1492150858.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:59.182Z,1492150859.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:59.234Z,1492150859.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:59.449Z,1492150859.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:59.580Z,1492150859.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:59.621Z,1492150859.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:20:59.856Z,1492150859.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:20:59.983Z,1492150859.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:00.015Z,1492150860.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:00.386Z,1492150860.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:00.418Z,1492150860.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:00.799Z,1492150860.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:00.835Z,1492150860.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:01.191Z,1492150861.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:01.237Z,1492150861.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:01.592Z,1492150861.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:01.627Z,1492150861.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:01.994Z,1492150861.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:02.009Z,1492150862.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:02.375Z,1492150862.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:02.413Z,1492150862.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:02.777Z,1492150862.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:02.817Z,1492150862.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:03.179Z,1492150863.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:03.195Z,1492150863.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:03.626Z,1492150863.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:03.642Z,1492150863.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:03.984Z,1492150863.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:04.024Z,1492150864.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:04.386Z,1492150864.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:04.402Z,1492150864.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:04.787Z,1492150864.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:04.837Z,1492150864.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:05.210Z,1492150865.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:05.248Z,1492150865.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:05.619Z,1492150865.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:05.655Z,1492150865.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:05.989Z,1492150865.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:06.018Z,1492150866.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:06.393Z,1492150866.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:06.417Z,1492150866.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:06.794Z,1492150866.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:06.879Z,1492150866.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:07.178Z,1492150867.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:07.218Z,1492150867.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:07.578Z,1492150867.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:07.610Z,1492150867.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:07.982Z,1492150867.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:08.022Z,1492150868.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:08.377Z,1492150868.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:08.398Z,1492150868.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:08.789Z,1492150868.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:08.821Z,1492150868.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:09.189Z,1492150869.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:09.205Z,1492150869.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:09.594Z,1492150869.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:09.609Z,1492150869.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:09.980Z,1492150869.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:10.067Z,1492150870.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:10.377Z,1492150870.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:10.404Z,1492150870.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:10.790Z,1492150870.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:10.846Z,1492150870.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:14.315Z,1492150874.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:14.352Z,1492150874.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:14.456Z,1492150874.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:14.509Z,1492150874.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:14.844Z,1492150874.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:14.902Z,1492150874.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:15.243Z,1492150875.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:15.266Z,1492150875.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:15.649Z,1492150875.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:15.664Z,1492150875.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:16.030Z,1492150876.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:16.060Z,1492150876.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:16.453Z,1492150876.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:16.469Z,1492150876.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:16.829Z,1492150876.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:16.856Z,1492150876.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:17.231Z,1492150877.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:17.258Z,1492150877.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:17.629Z,1492150877.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:17.662Z,1492150877.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:18.054Z,1492150878.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:18.073Z,1492150878.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:18.457Z,1492150878.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:18.472Z,1492150878.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:18.829Z,1492150878.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:18.868Z,1492150878.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:19.234Z,1492150879.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:19.261Z,1492150879.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:19.637Z,1492150879.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:19.670Z,1492150879.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:20.037Z,1492150880.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:20.132Z,1492150880.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:20.429Z,1492150880.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:20.466Z,1492150880.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:20.837Z,1492150880.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:20.864Z,1492150880.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:21.234Z,1492150881.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:21.254Z,1492150881.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:21.636Z,1492150881.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:21.663Z,1492150881.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:22.041Z,1492150882.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:22.058Z,1492150882.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:22.452Z,1492150882.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:22.467Z,1492150882.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:22.847Z,1492150882.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:22.867Z,1492150882.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:23.229Z,1492150883.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:23.256Z,1492150883.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:23.629Z,1492150883.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:23.665Z,1492150883.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:24.029Z,1492150884.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:24.056Z,1492150884.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:24.429Z,1492150884.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:24.466Z,1492150884.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:24.829Z,1492150884.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:24.857Z,1492150884.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:25.229Z,1492150885.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:25.256Z,1492150885.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:25.629Z,1492150885.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:25.682Z,1492150885.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:26.033Z,1492150886.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:26.060Z,1492150886.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:26.433Z,1492150886.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:26.460Z,1492150886.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:26.849Z,1492150886.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:26.870Z,1492150886.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:27.229Z,1492150887.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:27.274Z,1492150887.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:27.638Z,1492150887.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:27.654Z,1492150887.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:28.038Z,1492150888.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:28.090Z,1492150888.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:28.438Z,1492150888.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:28.483Z,1492150888.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:28.838Z,1492150888.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:28.859Z,1492150888.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:29.245Z,1492150889.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:29.262Z,1492150889.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:29.642Z,1492150889.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:29.658Z,1492150889.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:30.037Z,1492150890.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:30.053Z,1492150890.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:30.445Z,1492150890.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:30.461Z,1492150890.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:30.851Z,1492150890.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:30.868Z,1492150890.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:31.247Z,1492150891.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:31.264Z,1492150891.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:31.645Z,1492150891.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:31.662Z,1492150891.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:32.029Z,1492150892.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:32.057Z,1492150892.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:32.429Z,1492150892.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:32.463Z,1492150892.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:32.842Z,1492150892.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:32.859Z,1492150892.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:33.229Z,1492150893.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:33.262Z,1492150893.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:33.640Z,1492150893.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:33.663Z,1492150893.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:34.052Z,1492150894.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:34.074Z,1492150894.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:34.452Z,1492150894.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:34.486Z,1492150894.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:34.829Z,1492150894.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:34.862Z,1492150894.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:35.229Z,1492150895.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:35.266Z,1492150895.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:35.629Z,1492150895.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:35.653Z,1492150895.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:36.029Z,1492150896.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:36.070Z,1492150896.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:36.437Z,1492150896.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:36.478Z,1492150896.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:36.845Z,1492150896.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:36.876Z,1492150896.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:37.239Z,1492150897.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:37.254Z,1492150897.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:37.635Z,1492150897.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:37.658Z,1492150897.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:38.034Z,1492150898.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:38.050Z,1492150898.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:38.443Z,1492150898.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:38.462Z,1492150898.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:38.836Z,1492150898.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:38.864Z,1492150898.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:39.244Z,1492150899.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:39.259Z,1492150899.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:39.634Z,1492150899.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:39.661Z,1492150899.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:40.038Z,1492150900.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:40.069Z,1492150900.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:40.429Z,1492150900.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:40.490Z,1492150900.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:40.823Z,1492150900.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:40.852Z,1492150900.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:41.229Z,1492150901.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:41.267Z,1492150901.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:41.636Z,1492150901.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:41.690Z,1492150901.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:42.043Z,1492150902.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:42.060Z,1492150902.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:42.453Z,1492150902.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:42.506Z,1492150902.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:42.843Z,1492150902.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:42.892Z,1492150902.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:43.240Z,1492150903.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:43.256Z,1492150903.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:43.639Z,1492150903.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:43.656Z,1492150903.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:44.039Z,1492150904.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:44.054Z,1492150904.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:44.436Z,1492150904.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:44.458Z,1492150904.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:44.833Z,1492150904.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:44.858Z,1492150904.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:45.244Z,1492150905.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:45.259Z,1492150905.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:45.634Z,1492150905.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:45.665Z,1492150905.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:46.040Z,1492150906.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:46.056Z,1492150906.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:46.441Z,1492150906.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:46.456Z,1492150906.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:46.827Z,1492150906.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:46.860Z,1492150906.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:47.229Z,1492150907.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:47.266Z,1492150907.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:47.634Z,1492150907.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:47.668Z,1492150907.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:48.027Z,1492150908.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:48.059Z,1492150908.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:48.433Z,1492150908.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:48.473Z,1492150908.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:48.837Z,1492150908.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:48.877Z,1492150908.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:49.246Z,1492150909.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:49.271Z,1492150909.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:49.641Z,1492150909.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:49.657Z,1492150909.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:50.032Z,1492150910.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:50.061Z,1492150910.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:50.433Z,1492150910.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:50.461Z,1492150910.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:50.845Z,1492150910.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:50.861Z,1492150910.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:51.229Z,1492150911.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:51.257Z,1492150911.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:51.629Z,1492150911.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:51.656Z,1492150911.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:52.029Z,1492150912.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:52.062Z,1492150912.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:52.429Z,1492150912.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:52.462Z,1492150912.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:52.829Z,1492150912.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:52.857Z,1492150912.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:53.226Z,1492150913.226 [NAL9602](INFO): SBD MO Status=0, MOMSN=2118, MT Status=0, MTMSN=0
2017-04-14T06:21:53.226Z,1492150913.226 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:21:53.255Z,1492150913.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:53.352Z,1492150913.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:53.638Z,1492150913.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:53.654Z,1492150913.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:54.056Z,1492150914.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:54.087Z,1492150914.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:54.426Z,1492150914.427 [NAL9602](INFO): GPS fix at 20170414T062209: (36.802333, -121.787127)
2017-04-14T06:21:54.444Z,1492150914.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:54.502Z,1492150914.503 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:21:54.502Z,1492150914.503 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:21:54.856Z,1492150914.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:54.930Z,1492150914.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:54.930Z,1492150914.930 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:21:54.930Z,1492150914.930 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:21:54.950Z,1492150914.950 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:54.950Z,1492150914.950 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:21:54.950Z,1492150914.950 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:21:54.987Z,1492150914.987 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:21:54.988Z,1492150914.987 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:21:55.363Z,1492150915.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:55.504Z,1492150915.504 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:21:55.504Z,1492150915.504 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:21:55.505Z,1492150915.505 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:21:55.505Z,1492150915.505 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:21:55.686Z,1492150915.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:55.751Z,1492150915.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:21:55.752Z,1492150915.751 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:21:55.752Z,1492150915.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:21:55.758Z,1492150915.758 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:21:55.758Z,1492150915.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:21:55.759Z,1492150915.759 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:21:59.221Z,1492150919.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:59.237Z,1492150919.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:59.314Z,1492150919.314 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0104.lzma
2017-04-14T06:21:59.354Z,1492150919.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:59.422Z,1492150919.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:21:59.737Z,1492150919.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:21:59.793Z,1492150919.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:00.118Z,1492150920.118 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0104.lzma.bak
2017-04-14T06:22:00.118Z,1492150920.118 [DataOverHttps](INFO): SBD MOMSN=4885354
2017-04-14T06:22:00.141Z,1492150920.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:00.182Z,1492150920.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:00.559Z,1492150920.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:00.591Z,1492150920.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:00.961Z,1492150920.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:01.034Z,1492150921.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:05.425Z,1492150925.425 [NAL9602](INFO): Powering down
2017-04-14T06:22:05.444Z,1492150925.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:05.486Z,1492150925.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:05.599Z,1492150925.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:05.634Z,1492150925.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:05.958Z,1492150925.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:06.014Z,1492150926.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:06.357Z,1492150926.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:06.393Z,1492150926.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:06.772Z,1492150926.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:06.800Z,1492150926.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:07.175Z,1492150927.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:07.208Z,1492150927.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:10.727Z,1492150930.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:10.737Z,1492150930.737 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:22:10.737Z,1492150930.737 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:22:10.737Z,1492150930.737 [BPC1](ERROR): Data Fault
2017-04-14T06:22:10.750Z,1492150930.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:10.830Z,1492150930.830 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:22:10.841Z,1492150930.841 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0105.lzma
2017-04-14T06:22:10.876Z,1492150930.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:10.906Z,1492150930.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:11.267Z,1492150931.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:11.308Z,1492150931.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:11.654Z,1492150931.654 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0105.lzma.bak
2017-04-14T06:22:11.658Z,1492150931.658 [DataOverHttps](INFO): SBD MOMSN=4885357
2017-04-14T06:22:11.695Z,1492150931.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:11.722Z,1492150931.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:11.773Z,1492150931.773 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:22:11.773Z,1492150931.773 [BPC1] No Fault, FailCount= 1
2017-04-14T06:22:12.090Z,1492150932.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:12.162Z,1492150932.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:12.171Z,1492150932.171 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:22:12.171Z,1492150932.171 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:22:12.172Z,1492150932.172 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:22:12.465Z,1492150932.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:12.523Z,1492150932.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:16.079Z,1492150936.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:16.112Z,1492150936.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:16.222Z,1492150936.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:16.242Z,1492150936.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:16.578Z,1492150936.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:16.626Z,1492150936.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:17.035Z,1492150937.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:17.114Z,1492150937.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:17.380Z,1492150937.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:17.433Z,1492150937.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:17.772Z,1492150937.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:17.789Z,1492150937.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:18.170Z,1492150938.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:18.205Z,1492150938.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:18.576Z,1492150938.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:18.595Z,1492150938.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:19.052Z,1492150939.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:19.068Z,1492150939.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:19.377Z,1492150939.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:19.422Z,1492150939.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:19.765Z,1492150939.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:19.803Z,1492150939.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:20.173Z,1492150940.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:20.206Z,1492150940.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:20.573Z,1492150940.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:20.606Z,1492150940.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:20.970Z,1492150940.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:20.994Z,1492150940.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:21.397Z,1492150941.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:21.414Z,1492150941.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:21.771Z,1492150941.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:21.834Z,1492150941.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:22.174Z,1492150942.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:22.190Z,1492150942.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:22.248Z,1492150942.248 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:22:22.574Z,1492150942.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:22.594Z,1492150942.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:22.972Z,1492150942.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:23.005Z,1492150943.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:23.386Z,1492150943.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:23.457Z,1492150943.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:23.774Z,1492150943.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:23.790Z,1492150943.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:24.175Z,1492150944.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:24.229Z,1492150944.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:24.577Z,1492150944.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:24.657Z,1492150944.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:24.994Z,1492150944.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:25.045Z,1492150945.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:25.378Z,1492150945.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:25.413Z,1492150945.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:25.793Z,1492150945.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:25.860Z,1492150945.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:26.177Z,1492150946.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:26.230Z,1492150946.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:26.577Z,1492150946.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:26.629Z,1492150946.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:26.976Z,1492150946.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:27.034Z,1492150947.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:27.371Z,1492150947.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:27.401Z,1492150947.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:27.773Z,1492150947.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:27.816Z,1492150947.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:28.169Z,1492150948.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:28.241Z,1492150948.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:28.573Z,1492150948.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:28.616Z,1492150948.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:29.010Z,1492150949.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:29.030Z,1492150949.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:29.375Z,1492150949.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:29.417Z,1492150949.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:29.770Z,1492150949.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:29.821Z,1492150949.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:30.172Z,1492150950.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:30.187Z,1492150950.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:30.572Z,1492150950.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:30.615Z,1492150950.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:30.981Z,1492150950.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:31.043Z,1492150951.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:31.377Z,1492150951.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:31.421Z,1492150951.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:31.776Z,1492150951.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:31.793Z,1492150951.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:32.166Z,1492150952.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:32.204Z,1492150952.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:32.565Z,1492150952.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:32.608Z,1492150952.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:33.039Z,1492150953.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:33.068Z,1492150953.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:33.369Z,1492150953.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:33.437Z,1492150953.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:33.765Z,1492150953.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:33.814Z,1492150953.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:34.170Z,1492150954.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:34.199Z,1492150954.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:34.573Z,1492150954.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:34.613Z,1492150954.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:34.973Z,1492150954.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:35.022Z,1492150955.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:35.390Z,1492150955.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:35.426Z,1492150955.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:35.772Z,1492150955.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:35.817Z,1492150955.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:36.165Z,1492150956.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:36.210Z,1492150956.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:36.573Z,1492150956.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:36.611Z,1492150956.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:36.967Z,1492150956.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:37.022Z,1492150957.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:37.365Z,1492150957.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:37.386Z,1492150957.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:37.770Z,1492150957.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:37.790Z,1492150957.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:38.182Z,1492150958.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:38.266Z,1492150958.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:38.573Z,1492150958.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:38.609Z,1492150958.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:38.971Z,1492150958.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:39.106Z,1492150959.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:39.388Z,1492150959.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:39.425Z,1492150959.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:39.777Z,1492150959.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:39.830Z,1492150959.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:40.178Z,1492150960.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:40.188Z,1492150960.188 [PNI_TCM](ERROR): CRC does not match. Expected:0x30766 got:0x6593
2017-04-14T06:22:40.214Z,1492150960.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:40.565Z,1492150960.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:40.630Z,1492150960.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:40.983Z,1492150960.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:41.036Z,1492150961.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:41.376Z,1492150961.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:41.405Z,1492150961.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:41.765Z,1492150961.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:41.804Z,1492150961.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:42.170Z,1492150962.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:42.201Z,1492150962.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:42.573Z,1492150962.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:42.613Z,1492150962.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:42.972Z,1492150962.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:43.009Z,1492150963.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:43.378Z,1492150963.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:43.405Z,1492150963.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:43.772Z,1492150963.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:43.813Z,1492150963.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:44.169Z,1492150964.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:44.214Z,1492150964.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:44.570Z,1492150964.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:44.658Z,1492150964.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:44.970Z,1492150964.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:45.025Z,1492150965.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:45.377Z,1492150965.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:45.429Z,1492150965.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:45.770Z,1492150965.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:45.790Z,1492150965.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:46.170Z,1492150966.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:46.193Z,1492150966.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:46.576Z,1492150966.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:46.604Z,1492150966.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:47.015Z,1492150967.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:47.045Z,1492150967.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:47.375Z,1492150967.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:47.421Z,1492150967.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:47.784Z,1492150967.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:47.809Z,1492150967.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:48.174Z,1492150968.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:48.221Z,1492150968.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:48.565Z,1492150968.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:48.602Z,1492150968.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:48.965Z,1492150968.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:49.014Z,1492150969.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:49.377Z,1492150969.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:49.394Z,1492150969.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:49.776Z,1492150969.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:49.817Z,1492150969.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:50.165Z,1492150970.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:50.215Z,1492150970.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:50.569Z,1492150970.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:50.604Z,1492150970.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:50.965Z,1492150970.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:51.011Z,1492150971.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:51.389Z,1492150971.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:51.407Z,1492150971.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:51.765Z,1492150971.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:51.813Z,1492150971.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:52.169Z,1492150972.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:52.206Z,1492150972.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:52.577Z,1492150972.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:52.605Z,1492150972.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:52.970Z,1492150972.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:53.077Z,1492150973.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:53.373Z,1492150973.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:53.411Z,1492150973.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:53.774Z,1492150973.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:53.830Z,1492150973.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:54.178Z,1492150974.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:54.217Z,1492150974.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:54.575Z,1492150974.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:54.630Z,1492150974.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:54.969Z,1492150974.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:55.010Z,1492150975.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:55.379Z,1492150975.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:55.430Z,1492150975.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:55.776Z,1492150975.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:55.816Z,1492150975.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:56.177Z,1492150976.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:56.200Z,1492150976.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:56.567Z,1492150976.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:56.615Z,1492150976.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:56.984Z,1492150976.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:57.032Z,1492150977.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:57.386Z,1492150977.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:57.426Z,1492150977.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:57.783Z,1492150977.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:57.833Z,1492150977.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:58.177Z,1492150978.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:58.209Z,1492150978.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:58.583Z,1492150978.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:58.600Z,1492150978.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:58.988Z,1492150978.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:59.005Z,1492150979.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:59.384Z,1492150979.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:59.407Z,1492150979.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:22:59.770Z,1492150979.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:22:59.845Z,1492150979.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:00.176Z,1492150980.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:00.213Z,1492150980.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:00.568Z,1492150980.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:00.584Z,1492150980.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:00.987Z,1492150980.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:01.068Z,1492150981.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:01.383Z,1492150981.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:01.426Z,1492150981.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:01.782Z,1492150981.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:01.806Z,1492150981.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:02.172Z,1492150982.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:02.190Z,1492150982.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:02.582Z,1492150982.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:02.609Z,1492150982.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:02.965Z,1492150982.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:03.007Z,1492150983.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:03.440Z,1492150983.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:03.497Z,1492150983.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:03.842Z,1492150983.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:03.883Z,1492150983.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:04.223Z,1492150984.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:04.296Z,1492150984.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:04.575Z,1492150984.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:04.676Z,1492150984.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:05.006Z,1492150985.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:05.093Z,1492150985.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:05.414Z,1492150985.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:05.451Z,1492150985.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:05.775Z,1492150985.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:05.878Z,1492150985.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:06.180Z,1492150986.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:06.270Z,1492150986.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:06.581Z,1492150986.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:06.635Z,1492150986.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:07.002Z,1492150987.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:07.036Z,1492150987.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:07.394Z,1492150987.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:07.494Z,1492150987.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:07.808Z,1492150987.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:07.836Z,1492150987.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:08.180Z,1492150988.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:08.231Z,1492150988.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:08.586Z,1492150988.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:08.604Z,1492150988.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:08.982Z,1492150988.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:09.054Z,1492150989.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:09.389Z,1492150989.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:09.445Z,1492150989.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:09.781Z,1492150989.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:09.799Z,1492150989.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:10.182Z,1492150990.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:10.200Z,1492150990.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:10.565Z,1492150990.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:10.601Z,1492150990.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:10.969Z,1492150990.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:10.999Z,1492150990.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:11.369Z,1492150991.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:11.400Z,1492150991.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:11.769Z,1492150991.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:11.807Z,1492150991.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:12.165Z,1492150992.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:12.198Z,1492150992.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:12.570Z,1492150992.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:12.602Z,1492150992.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:16.018Z,1492150996.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:16.034Z,1492150996.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:16.133Z,1492150996.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:16.174Z,1492150996.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:16.538Z,1492150996.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:16.564Z,1492150996.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:16.941Z,1492150996.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:16.969Z,1492150996.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:17.363Z,1492150997.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:17.379Z,1492150997.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:17.735Z,1492150997.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:17.773Z,1492150997.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:18.144Z,1492150998.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:18.160Z,1492150998.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:18.545Z,1492150998.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:18.561Z,1492150998.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:18.950Z,1492150998.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:18.967Z,1492150998.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:19.329Z,1492150999.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:19.363Z,1492150999.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:19.752Z,1492150999.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:19.768Z,1492150999.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:20.140Z,1492151000.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:20.163Z,1492151000.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:20.170Z,1492151000.170 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:20.170Z,1492151000.170 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:23:20.170Z,1492151000.170 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:23:20.212Z,1492151000.212 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:23:20.529Z,1492151000.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:20.566Z,1492151000.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:20.584Z,1492151000.584 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:23:20.584Z,1492151000.584 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:23:20.933Z,1492151000.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:20.964Z,1492151000.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:20.970Z,1492151000.970 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:23:20.971Z,1492151000.971 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:23:20.971Z,1492151000.971 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:23:21.331Z,1492151001.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:21.389Z,1492151001.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:21.733Z,1492151001.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:21.813Z,1492151001.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:22.133Z,1492151002.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:22.166Z,1492151002.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:22.537Z,1492151002.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:22.544Z,1492151002.544 [PNI_TCM](ERROR): CRC does not match. Expected:0x42104 got:0x7489
2017-04-14T06:23:22.574Z,1492151002.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:22.934Z,1492151002.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:22.982Z,1492151002.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:23.334Z,1492151003.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:23.358Z,1492151003.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:23.734Z,1492151003.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:23.786Z,1492151003.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:24.138Z,1492151004.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:24.154Z,1492151004.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:24.545Z,1492151004.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:24.603Z,1492151004.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:24.937Z,1492151004.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:24.953Z,1492151004.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:25.345Z,1492151005.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:25.361Z,1492151005.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:25.744Z,1492151005.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:25.761Z,1492151005.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:26.142Z,1492151006.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:26.162Z,1492151006.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:26.542Z,1492151006.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:26.558Z,1492151006.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:26.964Z,1492151006.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:26.987Z,1492151006.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:27.342Z,1492151007.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:27.374Z,1492151007.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:27.740Z,1492151007.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:27.766Z,1492151007.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:28.136Z,1492151008.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:28.164Z,1492151008.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:28.533Z,1492151008.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:28.575Z,1492151008.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:28.962Z,1492151008.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:28.987Z,1492151008.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:29.338Z,1492151009.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:29.362Z,1492151009.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:29.745Z,1492151009.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:29.775Z,1492151009.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:30.141Z,1492151010.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:30.178Z,1492151010.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:30.540Z,1492151010.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:30.572Z,1492151010.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:30.938Z,1492151010.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:30.953Z,1492151010.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:31.339Z,1492151011.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:31.355Z,1492151011.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:31.743Z,1492151011.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:31.761Z,1492151011.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:32.145Z,1492151012.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:32.166Z,1492151012.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:32.543Z,1492151012.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:32.558Z,1492151012.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:32.942Z,1492151012.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:32.958Z,1492151012.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:33.355Z,1492151013.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:33.371Z,1492151013.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:33.733Z,1492151013.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:33.766Z,1492151013.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:34.140Z,1492151014.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:34.173Z,1492151014.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:34.541Z,1492151014.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:34.576Z,1492151014.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:34.944Z,1492151014.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:34.976Z,1492151014.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:35.346Z,1492151015.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:35.381Z,1492151015.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:35.744Z,1492151015.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:35.762Z,1492151015.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:36.148Z,1492151016.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:36.256Z,1492151016.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:36.538Z,1492151016.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:36.614Z,1492151016.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:36.946Z,1492151016.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:36.975Z,1492151016.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:37.342Z,1492151017.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:37.422Z,1492151017.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:37.734Z,1492151017.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:37.769Z,1492151017.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:38.154Z,1492151018.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:38.219Z,1492151018.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:38.535Z,1492151018.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:38.588Z,1492151018.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:38.942Z,1492151018.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:38.987Z,1492151018.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:39.344Z,1492151019.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:39.381Z,1492151019.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:39.754Z,1492151019.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:39.807Z,1492151019.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:40.148Z,1492151020.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:40.173Z,1492151020.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:40.541Z,1492151020.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:40.558Z,1492151020.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:40.931Z,1492151020.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:40.960Z,1492151020.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:41.367Z,1492151021.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:41.407Z,1492151021.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:41.736Z,1492151021.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:41.764Z,1492151021.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:42.126Z,1492151022.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:42.143Z,1492151022.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:42.544Z,1492151022.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:42.574Z,1492151022.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:42.934Z,1492151022.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:42.976Z,1492151022.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:43.341Z,1492151023.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:43.373Z,1492151023.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:43.726Z,1492151023.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:43.776Z,1492151023.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:44.141Z,1492151024.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:44.178Z,1492151024.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:44.534Z,1492151024.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:44.549Z,1492151024.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:44.938Z,1492151024.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:44.956Z,1492151024.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:45.341Z,1492151025.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:45.357Z,1492151025.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:45.737Z,1492151025.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:45.753Z,1492151025.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:46.141Z,1492151026.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:46.167Z,1492151026.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:46.544Z,1492151026.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:46.560Z,1492151026.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:46.937Z,1492151026.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:46.953Z,1492151026.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:47.338Z,1492151027.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:47.354Z,1492151027.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:47.745Z,1492151027.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:47.766Z,1492151027.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:48.141Z,1492151028.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:48.158Z,1492151028.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:48.529Z,1492151028.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:48.556Z,1492151028.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:48.929Z,1492151028.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:48.966Z,1492151028.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:49.337Z,1492151029.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:49.364Z,1492151029.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:49.729Z,1492151029.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:49.745Z,1492151029.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:50.134Z,1492151030.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:50.150Z,1492151030.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:50.535Z,1492151030.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:50.558Z,1492151030.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:50.929Z,1492151030.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:50.990Z,1492151030.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:51.331Z,1492151031.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:51.347Z,1492151031.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:51.730Z,1492151031.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:51.831Z,1492151031.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:52.129Z,1492151032.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:52.161Z,1492151032.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:52.529Z,1492151032.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:52.570Z,1492151032.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:52.929Z,1492151032.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:52.982Z,1492151032.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:53.333Z,1492151033.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:53.360Z,1492151033.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:53.729Z,1492151033.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:53.765Z,1492151033.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:54.143Z,1492151034.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:54.176Z,1492151034.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:54.538Z,1492151034.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:54.561Z,1492151034.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:54.937Z,1492151034.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:54.958Z,1492151034.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:55.341Z,1492151035.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:55.362Z,1492151035.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:55.729Z,1492151035.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:55.757Z,1492151035.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:56.129Z,1492151036.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:56.165Z,1492151036.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:56.526Z,1492151036.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:56.554Z,1492151036.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:56.929Z,1492151036.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:56.945Z,1492151036.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:57.334Z,1492151037.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:57.354Z,1492151037.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:57.732Z,1492151037.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:57.747Z,1492151037.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:58.139Z,1492151038.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:58.185Z,1492151038.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:58.546Z,1492151038.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:58.599Z,1492151038.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:58.937Z,1492151038.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:58.958Z,1492151038.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:59.337Z,1492151039.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:59.358Z,1492151039.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:23:59.746Z,1492151039.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:23:59.761Z,1492151039.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:00.141Z,1492151040.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:00.160Z,1492151040.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:00.528Z,1492151040.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:00.560Z,1492151040.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:00.946Z,1492151040.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:00.962Z,1492151040.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:01.329Z,1492151041.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:01.362Z,1492151041.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:01.729Z,1492151041.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:01.766Z,1492151041.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:02.138Z,1492151042.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:02.164Z,1492151042.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:02.529Z,1492151042.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:02.565Z,1492151042.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:02.929Z,1492151042.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:02.966Z,1492151042.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:03.341Z,1492151043.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:03.368Z,1492151043.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:03.741Z,1492151043.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:03.767Z,1492151043.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:04.129Z,1492151044.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:04.137Z,1492151044.137 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:24:04.138Z,1492151044.138 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:24:04.138Z,1492151044.138 [BPC1](ERROR): Data Fault
2017-04-14T06:24:04.159Z,1492151044.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:04.182Z,1492151044.182 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:24:04.541Z,1492151044.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:04.576Z,1492151044.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:04.934Z,1492151044.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:04.954Z,1492151044.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:05.341Z,1492151045.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:05.376Z,1492151045.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:05.397Z,1492151045.397 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:24:05.398Z,1492151045.398 [BPC1] No Fault, FailCount= 1
2017-04-14T06:24:05.737Z,1492151045.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:05.812Z,1492151045.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:06.129Z,1492151046.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:06.182Z,1492151046.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:06.530Z,1492151046.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:06.546Z,1492151046.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:06.967Z,1492151046.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:07.027Z,1492151047.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:07.331Z,1492151047.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:07.346Z,1492151047.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:07.741Z,1492151047.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:07.757Z,1492151047.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:08.137Z,1492151048.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:08.158Z,1492151048.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:08.526Z,1492151048.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:08.563Z,1492151048.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:08.932Z,1492151048.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:08.964Z,1492151048.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:09.337Z,1492151049.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:09.374Z,1492151049.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:09.734Z,1492151049.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:09.749Z,1492151049.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:10.127Z,1492151050.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:10.143Z,1492151050.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:10.537Z,1492151050.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:10.553Z,1492151050.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:10.929Z,1492151050.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:10.956Z,1492151050.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:11.349Z,1492151051.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:11.367Z,1492151051.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:11.765Z,1492151051.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:11.789Z,1492151051.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:12.134Z,1492151052.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:12.149Z,1492151052.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:12.528Z,1492151052.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:12.562Z,1492151052.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:12.939Z,1492151052.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:12.956Z,1492151052.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:16.384Z,1492151056.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:16.400Z,1492151056.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:16.505Z,1492151056.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:16.534Z,1492151056.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:16.920Z,1492151056.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:16.946Z,1492151056.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:17.349Z,1492151057.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:17.357Z,1492151057.358 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:24:17.358Z,1492151057.358 [BPC1] Data Fault, FailCount= 2
2017-04-14T06:24:17.358Z,1492151057.358 [BPC1](ERROR): Data Fault
2017-04-14T06:24:17.375Z,1492151057.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:17.451Z,1492151057.451 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:24:17.729Z,1492151057.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:17.770Z,1492151057.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:18.122Z,1492151058.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:18.186Z,1492151058.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:18.501Z,1492151058.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:18.534Z,1492151058.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:18.553Z,1492151058.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:24:18.553Z,1492151058.553 [BPC1] No Fault, FailCount= 2
2017-04-14T06:24:18.924Z,1492151058.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:19.019Z,1492151059.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:19.319Z,1492151059.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:19.375Z,1492151059.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:19.704Z,1492151059.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:19.738Z,1492151059.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:20.101Z,1492151060.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:20.139Z,1492151060.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:20.501Z,1492151060.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:20.534Z,1492151060.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:20.903Z,1492151060.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:20.942Z,1492151060.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:21.305Z,1492151061.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:21.333Z,1492151061.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:21.701Z,1492151061.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:21.738Z,1492151061.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:22.101Z,1492151062.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:22.137Z,1492151062.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:22.499Z,1492151062.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:22.515Z,1492151062.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:22.906Z,1492151062.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:22.942Z,1492151062.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:23.305Z,1492151063.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:23.344Z,1492151063.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:23.706Z,1492151063.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:23.733Z,1492151063.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:24.109Z,1492151064.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:24.150Z,1492151064.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:24.501Z,1492151064.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:24.517Z,1492151064.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:24.913Z,1492151064.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:24.929Z,1492151064.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:25.309Z,1492151065.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:25.330Z,1492151065.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:25.710Z,1492151065.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:25.725Z,1492151065.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:26.112Z,1492151066.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:26.128Z,1492151066.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:26.515Z,1492151066.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:26.530Z,1492151066.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:26.908Z,1492151066.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:26.928Z,1492151066.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:27.310Z,1492151067.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:27.326Z,1492151067.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:27.710Z,1492151067.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:27.725Z,1492151067.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:28.107Z,1492151068.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:28.123Z,1492151068.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:28.507Z,1492151068.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:28.533Z,1492151068.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:28.909Z,1492151068.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:28.926Z,1492151068.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:29.309Z,1492151069.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:29.330Z,1492151069.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:29.709Z,1492151069.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:29.725Z,1492151069.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:30.108Z,1492151070.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:30.130Z,1492151070.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:30.509Z,1492151070.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:30.524Z,1492151070.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:30.910Z,1492151070.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:30.926Z,1492151070.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:31.304Z,1492151071.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:31.385Z,1492151071.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:31.701Z,1492151071.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:31.727Z,1492151071.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:32.101Z,1492151072.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:32.170Z,1492151072.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:32.503Z,1492151072.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:32.571Z,1492151072.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:32.901Z,1492151072.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:32.954Z,1492151072.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:33.301Z,1492151073.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:33.370Z,1492151073.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:33.699Z,1492151073.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:33.732Z,1492151073.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:34.098Z,1492151074.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:34.133Z,1492151074.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:34.501Z,1492151074.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:34.527Z,1492151074.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:34.902Z,1492151074.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:34.938Z,1492151074.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:35.322Z,1492151075.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:35.342Z,1492151075.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:35.698Z,1492151075.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:35.722Z,1492151075.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:36.147Z,1492151076.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:36.203Z,1492151076.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:36.507Z,1492151076.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:36.549Z,1492151076.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:36.910Z,1492151076.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:36.959Z,1492151076.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:37.309Z,1492151077.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:37.330Z,1492151077.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:37.713Z,1492151077.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:37.729Z,1492151077.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:38.109Z,1492151078.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:38.125Z,1492151078.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:38.527Z,1492151078.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:38.543Z,1492151078.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:38.910Z,1492151078.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:38.930Z,1492151078.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:39.301Z,1492151079.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:39.328Z,1492151079.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:39.721Z,1492151079.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:39.742Z,1492151079.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:40.108Z,1492151080.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:40.139Z,1492151080.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:40.506Z,1492151080.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:40.522Z,1492151080.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:40.909Z,1492151080.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:40.950Z,1492151080.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:41.310Z,1492151081.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:41.349Z,1492151081.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:41.706Z,1492151081.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:41.726Z,1492151081.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:42.109Z,1492151082.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:42.130Z,1492151082.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:42.509Z,1492151082.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:42.525Z,1492151082.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:42.910Z,1492151082.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:42.934Z,1492151082.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:43.325Z,1492151083.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:43.366Z,1492151083.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:43.701Z,1492151083.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:43.744Z,1492151083.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:44.113Z,1492151084.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:44.139Z,1492151084.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:44.513Z,1492151084.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:44.539Z,1492151084.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:44.906Z,1492151084.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:44.942Z,1492151084.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:45.310Z,1492151085.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:45.373Z,1492151085.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:45.710Z,1492151085.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:45.781Z,1492151085.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:46.114Z,1492151086.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:46.138Z,1492151086.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:46.506Z,1492151086.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:46.523Z,1492151086.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:46.918Z,1492151086.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:46.974Z,1492151086.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:47.331Z,1492151087.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:47.346Z,1492151087.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:47.712Z,1492151087.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:47.782Z,1492151087.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:48.101Z,1492151088.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:48.165Z,1492151088.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:48.501Z,1492151088.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:48.528Z,1492151088.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:48.901Z,1492151088.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:48.928Z,1492151088.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:49.312Z,1492151089.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:49.333Z,1492151089.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:49.702Z,1492151089.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:49.736Z,1492151089.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:50.102Z,1492151090.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:50.138Z,1492151090.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:50.506Z,1492151090.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:50.533Z,1492151090.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:50.902Z,1492151090.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:50.931Z,1492151090.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:51.302Z,1492151091.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:51.326Z,1492151091.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:51.714Z,1492151091.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:51.739Z,1492151091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:52.101Z,1492151092.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:52.122Z,1492151092.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:52.502Z,1492151092.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:52.519Z,1492151092.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:52.907Z,1492151092.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:52.924Z,1492151092.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:53.310Z,1492151093.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:53.326Z,1492151093.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:53.707Z,1492151093.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:53.724Z,1492151093.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:54.107Z,1492151094.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:54.128Z,1492151094.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:54.509Z,1492151094.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:54.525Z,1492151094.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:54.909Z,1492151094.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:54.925Z,1492151094.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:55.314Z,1492151095.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:55.334Z,1492151095.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:55.725Z,1492151095.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:55.818Z,1492151095.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:55.818Z,1492151095.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:24:55.818Z,1492151095.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:24:55.826Z,1492151095.826 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:55.826Z,1492151095.826 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:24:55.826Z,1492151095.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:24:55.840Z,1492151095.840 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:24:55.841Z,1492151095.841 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:24:56.102Z,1492151096.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:56.172Z,1492151096.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:24:56.173Z,1492151096.173 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:24:56.173Z,1492151096.173 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:24:56.173Z,1492151096.173 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:24:56.511Z,1492151096.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:56.526Z,1492151096.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:24:56.526Z,1492151096.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:24:56.527Z,1492151096.527 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:24:56.548Z,1492151096.548 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:24:56.549Z,1492151096.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:24:56.549Z,1492151096.549 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:24:56.909Z,1492151096.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:56.924Z,1492151096.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:57.313Z,1492151097.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:57.329Z,1492151097.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:57.715Z,1492151097.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:57.731Z,1492151097.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:58.117Z,1492151098.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:58.134Z,1492151098.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:58.513Z,1492151098.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:58.530Z,1492151098.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:58.901Z,1492151098.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:58.938Z,1492151098.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:59.317Z,1492151099.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:59.338Z,1492151099.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:24:59.701Z,1492151099.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:24:59.734Z,1492151099.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:00.101Z,1492151100.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:00.174Z,1492151100.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:00.501Z,1492151100.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:00.522Z,1492151100.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:00.906Z,1492151100.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:00.988Z,1492151100.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:01.309Z,1492151101.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:01.346Z,1492151101.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:01.709Z,1492151101.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:01.770Z,1492151101.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:02.106Z,1492151102.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:02.166Z,1492151102.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:02.509Z,1492151102.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:02.525Z,1492151102.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:02.909Z,1492151102.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:02.926Z,1492151102.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:03.310Z,1492151103.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:03.326Z,1492151103.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:03.708Z,1492151103.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:03.734Z,1492151103.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:04.109Z,1492151104.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:04.125Z,1492151104.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:04.506Z,1492151104.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:04.523Z,1492151104.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:04.911Z,1492151104.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:04.936Z,1492151104.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:05.311Z,1492151105.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:05.335Z,1492151105.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:05.703Z,1492151105.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:05.747Z,1492151105.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:06.101Z,1492151106.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:06.117Z,1492151106.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:06.501Z,1492151106.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:06.574Z,1492151106.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:06.914Z,1492151106.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:06.944Z,1492151106.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:07.306Z,1492151107.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:07.344Z,1492151107.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:07.709Z,1492151107.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:07.745Z,1492151107.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:08.098Z,1492151108.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:08.114Z,1492151108.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:08.508Z,1492151108.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:08.524Z,1492151108.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:08.905Z,1492151108.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:08.920Z,1492151108.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:09.301Z,1492151109.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:09.337Z,1492151109.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:09.712Z,1492151109.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:09.728Z,1492151109.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:10.108Z,1492151110.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:10.128Z,1492151110.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:10.509Z,1492151110.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:10.525Z,1492151110.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:10.908Z,1492151110.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:10.928Z,1492151110.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:11.315Z,1492151111.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:11.342Z,1492151111.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:11.702Z,1492151111.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:11.744Z,1492151111.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:12.101Z,1492151112.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:12.118Z,1492151112.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:12.506Z,1492151112.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:12.542Z,1492151112.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:12.913Z,1492151112.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:12.950Z,1492151112.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:13.313Z,1492151113.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:13.350Z,1492151113.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:16.845Z,1492151116.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:16.952Z,1492151116.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:17.038Z,1492151117.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:17.074Z,1492151117.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:17.431Z,1492151117.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:17.474Z,1492151117.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:17.840Z,1492151117.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:17.892Z,1492151117.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:18.226Z,1492151118.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:18.243Z,1492151118.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:18.619Z,1492151118.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:18.724Z,1492151118.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:19.023Z,1492151119.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:19.085Z,1492151119.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:19.420Z,1492151119.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:19.436Z,1492151119.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:19.825Z,1492151119.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:19.840Z,1492151119.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:20.219Z,1492151120.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:20.235Z,1492151120.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:20.612Z,1492151120.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:20.634Z,1492151120.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:21.006Z,1492151121.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:21.042Z,1492151121.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:21.406Z,1492151121.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:21.444Z,1492151121.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:21.809Z,1492151121.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:21.850Z,1492151121.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:22.208Z,1492151122.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:22.266Z,1492151122.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:22.609Z,1492151122.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:22.626Z,1492151122.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:23.035Z,1492151123.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:23.104Z,1492151123.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:23.409Z,1492151123.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:23.467Z,1492151123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:23.808Z,1492151123.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:23.865Z,1492151123.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:24.214Z,1492151124.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:24.238Z,1492151124.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:24.622Z,1492151124.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:24.638Z,1492151124.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:25.062Z,1492151125.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:25.090Z,1492151125.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:25.418Z,1492151125.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:25.442Z,1492151125.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:25.808Z,1492151125.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:25.878Z,1492151125.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:26.209Z,1492151126.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:26.247Z,1492151126.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:26.609Z,1492151126.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:26.732Z,1492151126.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:27.018Z,1492151127.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:27.094Z,1492151127.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:27.418Z,1492151127.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:27.509Z,1492151127.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:27.830Z,1492151127.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:27.910Z,1492151127.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:28.223Z,1492151128.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:28.238Z,1492151128.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:28.643Z,1492151128.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:28.760Z,1492151128.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:29.123Z,1492151129.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:29.178Z,1492151129.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:29.438Z,1492151129.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:29.524Z,1492151129.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:29.826Z,1492151129.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:29.862Z,1492151129.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:30.211Z,1492151130.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:30.250Z,1492151130.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:30.671Z,1492151130.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:30.752Z,1492151130.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:31.036Z,1492151131.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:31.158Z,1492151131.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:31.408Z,1492151131.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:31.447Z,1492151131.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:31.810Z,1492151131.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:31.889Z,1492151131.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:32.206Z,1492151132.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:32.244Z,1492151132.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:32.635Z,1492151132.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:32.720Z,1492151132.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:33.051Z,1492151133.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:33.157Z,1492151133.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:33.407Z,1492151133.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:33.441Z,1492151133.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:33.818Z,1492151133.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:33.850Z,1492151133.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:34.236Z,1492151134.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:34.345Z,1492151134.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:34.623Z,1492151134.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:34.725Z,1492151134.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:35.014Z,1492151135.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:35.068Z,1492151135.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:35.406Z,1492151135.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:35.470Z,1492151135.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:35.807Z,1492151135.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:35.866Z,1492151135.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:36.206Z,1492151136.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:36.222Z,1492151136.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:36.610Z,1492151136.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:36.626Z,1492151136.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:37.042Z,1492151137.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:37.067Z,1492151137.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:37.413Z,1492151137.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:37.429Z,1492151137.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:37.824Z,1492151137.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:37.864Z,1492151137.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:38.214Z,1492151138.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:38.229Z,1492151138.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:38.613Z,1492151138.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:38.630Z,1492151138.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:39.060Z,1492151139.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:39.118Z,1492151139.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:39.417Z,1492151139.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:39.433Z,1492151139.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:39.802Z,1492151139.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:39.835Z,1492151139.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:40.218Z,1492151140.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:40.235Z,1492151140.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:40.653Z,1492151140.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:40.711Z,1492151140.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:41.009Z,1492151141.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:41.042Z,1492151141.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:41.451Z,1492151141.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:41.503Z,1492151141.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:41.810Z,1492151141.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:41.826Z,1492151141.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:42.215Z,1492151142.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:42.232Z,1492151142.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:42.654Z,1492151142.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:42.691Z,1492151142.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:43.005Z,1492151143.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:43.043Z,1492151143.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:43.405Z,1492151143.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:43.442Z,1492151143.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:43.813Z,1492151143.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:43.840Z,1492151143.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:44.205Z,1492151144.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:44.242Z,1492151144.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:44.704Z,1492151144.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:44.780Z,1492151144.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:45.005Z,1492151145.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:45.065Z,1492151145.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:45.409Z,1492151145.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:45.443Z,1492151145.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:45.814Z,1492151145.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:45.831Z,1492151145.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:46.213Z,1492151146.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:46.230Z,1492151146.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:46.677Z,1492151146.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:46.734Z,1492151146.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:47.005Z,1492151147.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:47.020Z,1492151147.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:47.405Z,1492151147.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:47.458Z,1492151147.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:47.809Z,1492151147.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:47.859Z,1492151147.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:48.210Z,1492151148.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:48.226Z,1492151148.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:48.613Z,1492151148.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:48.663Z,1492151148.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:49.005Z,1492151149.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:49.038Z,1492151149.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:49.405Z,1492151149.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:49.438Z,1492151149.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:49.805Z,1492151149.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:49.839Z,1492151149.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:50.205Z,1492151150.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:50.231Z,1492151150.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:50.605Z,1492151150.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:50.699Z,1492151150.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:51.011Z,1492151151.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:51.090Z,1492151151.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:51.409Z,1492151151.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:51.435Z,1492151151.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:51.802Z,1492151151.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:51.843Z,1492151151.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:52.209Z,1492151152.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:52.236Z,1492151152.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:52.625Z,1492151152.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:52.646Z,1492151152.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:53.007Z,1492151153.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:53.045Z,1492151153.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:53.405Z,1492151153.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:53.441Z,1492151153.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:53.813Z,1492151153.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:53.849Z,1492151153.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:54.206Z,1492151154.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:54.222Z,1492151154.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:54.662Z,1492151154.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:54.697Z,1492151154.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:55.032Z,1492151155.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:55.065Z,1492151155.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:55.456Z,1492151155.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:55.485Z,1492151155.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:55.835Z,1492151155.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:55.877Z,1492151155.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:56.213Z,1492151156.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:56.234Z,1492151156.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:56.654Z,1492151156.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:56.734Z,1492151156.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:57.005Z,1492151157.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:57.037Z,1492151157.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:57.405Z,1492151157.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:57.443Z,1492151157.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:57.805Z,1492151157.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:57.837Z,1492151157.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:58.259Z,1492151158.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:58.345Z,1492151158.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:58.658Z,1492151158.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:58.711Z,1492151158.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:59.007Z,1492151159.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:59.062Z,1492151159.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:59.415Z,1492151159.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:59.465Z,1492151159.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:25:59.813Z,1492151159.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:25:59.909Z,1492151159.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:00.211Z,1492151160.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:00.228Z,1492151160.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:00.648Z,1492151160.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:00.712Z,1492151160.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:01.009Z,1492151161.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:01.045Z,1492151161.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:01.413Z,1492151161.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:01.512Z,1492151161.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:01.808Z,1492151161.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:01.870Z,1492151161.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:02.213Z,1492151162.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:02.229Z,1492151162.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:02.628Z,1492151162.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:02.714Z,1492151162.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:03.013Z,1492151163.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:03.069Z,1492151163.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:03.414Z,1492151163.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:03.446Z,1492151163.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:03.817Z,1492151163.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:03.833Z,1492151163.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:04.218Z,1492151164.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:04.234Z,1492151164.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:04.622Z,1492151164.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:04.637Z,1492151164.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:05.007Z,1492151165.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:05.037Z,1492151165.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:05.405Z,1492151165.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:05.441Z,1492151165.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:05.805Z,1492151165.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:05.838Z,1492151165.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:06.202Z,1492151166.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:06.230Z,1492151166.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:06.602Z,1492151166.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:06.618Z,1492151166.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:07.006Z,1492151167.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:07.049Z,1492151167.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:07.411Z,1492151167.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:07.427Z,1492151167.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:07.812Z,1492151167.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:07.827Z,1492151167.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:08.209Z,1492151168.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:08.238Z,1492151168.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:08.638Z,1492151168.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:08.693Z,1492151168.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:09.005Z,1492151169.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:09.054Z,1492151169.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:09.413Z,1492151169.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:09.452Z,1492151169.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:09.809Z,1492151169.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:09.825Z,1492151169.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:10.213Z,1492151170.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:10.234Z,1492151170.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:10.647Z,1492151170.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:10.708Z,1492151170.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:11.016Z,1492151171.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:11.071Z,1492151171.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:11.414Z,1492151171.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:11.430Z,1492151171.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:11.811Z,1492151171.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:11.827Z,1492151171.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:12.215Z,1492151172.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:12.231Z,1492151172.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:12.666Z,1492151172.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:12.682Z,1492151172.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:13.017Z,1492151173.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:13.057Z,1492151173.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:13.420Z,1492151173.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:13.436Z,1492151173.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:17.069Z,1492151177.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:17.169Z,1492151177.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:17.275Z,1492151177.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:17.310Z,1492151177.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:17.649Z,1492151177.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:17.690Z,1492151177.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:18.093Z,1492151178.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:18.110Z,1492151178.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:18.455Z,1492151178.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:18.514Z,1492151178.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:18.849Z,1492151178.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:18.957Z,1492151178.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:19.262Z,1492151179.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:19.278Z,1492151179.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:19.641Z,1492151179.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:19.673Z,1492151179.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:20.049Z,1492151180.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:20.074Z,1492151180.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:20.441Z,1492151180.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:20.479Z,1492151180.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:20.847Z,1492151180.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:20.955Z,1492151180.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:20.986Z,1492151180.986 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:20.986Z,1492151180.986 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:26:20.986Z,1492151180.986 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:26:21.021Z,1492151181.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:26:21.247Z,1492151181.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:21.302Z,1492151181.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:21.332Z,1492151181.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:26:21.332Z,1492151181.332 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:26:21.645Z,1492151181.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:21.685Z,1492151181.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:21.691Z,1492151181.691 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:26:21.691Z,1492151181.691 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:26:21.692Z,1492151181.692 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:26:22.086Z,1492151182.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:22.112Z,1492151182.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:22.449Z,1492151182.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:22.465Z,1492151182.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:22.850Z,1492151182.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:22.870Z,1492151182.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:23.257Z,1492151183.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:23.273Z,1492151183.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:23.674Z,1492151183.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:23.720Z,1492151183.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:24.051Z,1492151184.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:24.068Z,1492151184.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:24.447Z,1492151184.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:24.464Z,1492151184.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:24.855Z,1492151184.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:24.872Z,1492151184.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:25.252Z,1492151185.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:25.280Z,1492151185.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:25.641Z,1492151185.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:25.670Z,1492151185.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:26.045Z,1492151186.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:26.078Z,1492151186.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:26.446Z,1492151186.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:26.479Z,1492151186.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:26.861Z,1492151186.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:26.885Z,1492151186.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:27.247Z,1492151187.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:27.277Z,1492151187.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:27.641Z,1492151187.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:27.676Z,1492151187.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:28.041Z,1492151188.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:28.077Z,1492151188.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:28.441Z,1492151188.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:28.468Z,1492151188.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:28.846Z,1492151188.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:28.866Z,1492151188.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:29.250Z,1492151189.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:29.266Z,1492151189.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:29.661Z,1492151189.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:29.676Z,1492151189.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:30.051Z,1492151190.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:30.071Z,1492151190.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:30.450Z,1492151190.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:30.466Z,1492151190.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:30.861Z,1492151190.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:30.929Z,1492151190.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:31.248Z,1492151191.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:31.287Z,1492151191.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:31.641Z,1492151191.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:31.665Z,1492151191.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:32.041Z,1492151192.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:32.078Z,1492151192.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:32.445Z,1492151192.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:32.513Z,1492151192.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:32.873Z,1492151192.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:32.941Z,1492151192.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:33.246Z,1492151193.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:33.298Z,1492151193.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:33.647Z,1492151193.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:33.694Z,1492151193.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:34.049Z,1492151194.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:34.065Z,1492151194.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:34.451Z,1492151194.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:34.466Z,1492151194.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:34.937Z,1492151194.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:35.032Z,1492151195.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:35.242Z,1492151195.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:35.286Z,1492151195.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:35.650Z,1492151195.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:35.666Z,1492151195.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:36.051Z,1492151196.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:36.067Z,1492151196.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:36.449Z,1492151196.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:36.465Z,1492151196.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:36.850Z,1492151196.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:36.870Z,1492151196.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:37.250Z,1492151197.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:37.266Z,1492151197.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:37.651Z,1492151197.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:37.667Z,1492151197.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:38.060Z,1492151198.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:38.125Z,1492151198.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:38.443Z,1492151198.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:38.484Z,1492151198.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:38.850Z,1492151198.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:38.875Z,1492151198.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:39.247Z,1492151199.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:39.265Z,1492151199.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:39.656Z,1492151199.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:39.673Z,1492151199.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:40.049Z,1492151200.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:40.069Z,1492151200.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:40.449Z,1492151200.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:40.467Z,1492151200.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:40.841Z,1492151200.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:40.908Z,1492151200.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:41.250Z,1492151201.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:41.266Z,1492151201.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:41.651Z,1492151201.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:41.668Z,1492151201.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:42.075Z,1492151202.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:42.120Z,1492151202.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:42.453Z,1492151202.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:42.469Z,1492151202.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:42.841Z,1492151202.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:42.878Z,1492151202.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:43.254Z,1492151203.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:43.281Z,1492151203.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:43.641Z,1492151203.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:43.687Z,1492151203.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:44.049Z,1492151204.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:44.084Z,1492151204.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:44.449Z,1492151204.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:44.484Z,1492151204.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:44.850Z,1492151204.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:44.870Z,1492151204.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:45.258Z,1492151205.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:45.282Z,1492151205.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:45.642Z,1492151205.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:45.719Z,1492151205.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:46.041Z,1492151206.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:46.069Z,1492151206.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:46.441Z,1492151206.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:46.490Z,1492151206.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:46.900Z,1492151206.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:46.944Z,1492151206.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:47.253Z,1492151207.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:47.306Z,1492151207.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:47.650Z,1492151207.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:47.692Z,1492151207.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:48.054Z,1492151208.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:48.071Z,1492151208.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:48.450Z,1492151208.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:48.467Z,1492151208.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:48.908Z,1492151208.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:48.966Z,1492151208.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:49.250Z,1492151209.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:49.265Z,1492151209.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:49.650Z,1492151209.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:49.666Z,1492151209.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:50.049Z,1492151210.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:50.095Z,1492151210.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:50.441Z,1492151210.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:50.575Z,1492151210.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:50.850Z,1492151210.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:50.867Z,1492151210.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:51.245Z,1492151211.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:51.269Z,1492151211.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:51.648Z,1492151211.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:51.705Z,1492151211.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:52.051Z,1492151212.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:52.075Z,1492151212.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:52.453Z,1492151212.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:52.468Z,1492151212.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:52.840Z,1492151212.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:52.881Z,1492151212.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:53.243Z,1492151213.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:53.290Z,1492151213.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:53.641Z,1492151213.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:53.679Z,1492151213.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:54.038Z,1492151214.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:54.054Z,1492151214.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:54.441Z,1492151214.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:54.457Z,1492151214.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:54.841Z,1492151214.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:54.874Z,1492151214.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:55.241Z,1492151215.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:55.278Z,1492151215.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:55.677Z,1492151215.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:55.693Z,1492151215.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:56.041Z,1492151216.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:56.062Z,1492151216.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:56.455Z,1492151216.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:56.557Z,1492151216.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:56.910Z,1492151216.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:56.976Z,1492151216.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:57.257Z,1492151217.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:57.281Z,1492151217.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:57.652Z,1492151217.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:57.682Z,1492151217.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:58.069Z,1492151218.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:58.085Z,1492151218.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:58.445Z,1492151218.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:58.472Z,1492151218.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:58.854Z,1492151218.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:58.886Z,1492151218.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:59.254Z,1492151219.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:59.321Z,1492151219.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:26:59.648Z,1492151219.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:26:59.699Z,1492151219.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:00.041Z,1492151220.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:00.068Z,1492151220.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:00.445Z,1492151220.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:00.513Z,1492151220.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:00.886Z,1492151220.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:00.915Z,1492151220.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:01.245Z,1492151221.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:01.298Z,1492151221.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:01.642Z,1492151221.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:01.698Z,1492151221.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:02.045Z,1492151222.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:02.078Z,1492151222.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:02.449Z,1492151222.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:02.481Z,1492151222.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:02.893Z,1492151222.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:02.944Z,1492151222.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:03.254Z,1492151223.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:03.269Z,1492151223.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:03.653Z,1492151223.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:03.669Z,1492151223.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:04.052Z,1492151224.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:04.068Z,1492151224.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:04.495Z,1492151224.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:04.575Z,1492151224.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:04.852Z,1492151224.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:04.934Z,1492151224.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:05.243Z,1492151225.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:05.282Z,1492151225.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:05.641Z,1492151225.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:05.681Z,1492151225.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:06.041Z,1492151226.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:06.091Z,1492151226.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:06.441Z,1492151226.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:06.535Z,1492151226.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:06.848Z,1492151226.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:06.869Z,1492151226.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:07.253Z,1492151227.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:07.268Z,1492151227.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:07.658Z,1492151227.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:07.674Z,1492151227.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:08.041Z,1492151228.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:08.079Z,1492151228.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:08.441Z,1492151228.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:08.522Z,1492151228.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:08.862Z,1492151228.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:08.886Z,1492151228.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:09.249Z,1492151229.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:09.276Z,1492151229.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:09.641Z,1492151229.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:09.673Z,1492151229.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:10.041Z,1492151230.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:10.081Z,1492151230.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:10.441Z,1492151230.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:10.527Z,1492151230.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:10.850Z,1492151230.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:10.885Z,1492151230.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:11.256Z,1492151231.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:11.286Z,1492151231.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:11.650Z,1492151231.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:11.678Z,1492151231.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:12.046Z,1492151232.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:12.067Z,1492151232.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:12.454Z,1492151232.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:12.471Z,1492151232.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:12.844Z,1492151232.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:12.881Z,1492151232.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:12.889Z,1492151232.889 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:27:12.890Z,1492151232.890 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:27:12.890Z,1492151232.890 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:27:12.890Z,1492151232.890 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:27:13.241Z,1492151233.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:13.268Z,1492151233.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:13.277Z,1492151233.277 [Default:CheckIn:D] Stopped
2017-04-14T06:27:13.277Z,1492151233.277 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:27:13.658Z,1492151233.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:13.678Z,1492151233.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:13.688Z,1492151233.688 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 181.132650 min 
2017-04-14T06:27:13.689Z,1492151233.689 [Default:CheckIn:E] Stopped
2017-04-14T06:27:13.689Z,1492151233.689 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:27:13.689Z,1492151233.689 [Default:CheckIn] Stopped
2017-04-14T06:27:13.689Z,1492151233.689 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:27:13.690Z,1492151233.690 [Default:CheckIn](INFO): Running loop #26
2017-04-14T06:27:13.690Z,1492151233.690 [Default:CheckIn] Running Loop=26
2017-04-14T06:27:13.690Z,1492151233.690 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:27:13.690Z,1492151233.690 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:27:18.165Z,1492151238.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:18.242Z,1492151238.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:18.354Z,1492151238.354 [NAL9602](INFO): Powering up
2017-04-14T06:27:18.385Z,1492151238.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:18.422Z,1492151238.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:18.753Z,1492151238.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:18.770Z,1492151238.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:19.131Z,1492151239.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:19.158Z,1492151239.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:19.528Z,1492151239.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:19.560Z,1492151239.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:19.928Z,1492151239.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:19.964Z,1492151239.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:20.328Z,1492151240.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:20.386Z,1492151240.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:20.722Z,1492151240.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:20.750Z,1492151240.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:21.123Z,1492151241.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:21.174Z,1492151241.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:21.525Z,1492151241.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:21.575Z,1492151241.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:21.925Z,1492151241.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:21.969Z,1492151241.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:22.326Z,1492151242.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:22.342Z,1492151242.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:22.753Z,1492151242.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:22.769Z,1492151242.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:23.122Z,1492151243.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:23.138Z,1492151243.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:23.531Z,1492151243.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:23.571Z,1492151243.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:23.938Z,1492151243.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:23.969Z,1492151243.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:24.357Z,1492151244.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:24.381Z,1492151244.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:24.728Z,1492151244.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:24.768Z,1492151244.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:25.125Z,1492151245.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:25.158Z,1492151245.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:25.525Z,1492151245.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:25.549Z,1492151245.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:25.929Z,1492151245.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:25.965Z,1492151245.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:26.320Z,1492151246.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:26.336Z,1492151246.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:26.728Z,1492151246.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:26.760Z,1492151246.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:27.138Z,1492151247.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:27.169Z,1492151247.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:27.536Z,1492151247.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:27.571Z,1492151247.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:27.960Z,1492151247.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:27.984Z,1492151247.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:28.330Z,1492151248.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:28.346Z,1492151248.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:28.740Z,1492151248.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:28.835Z,1492151248.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:29.148Z,1492151249.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:29.165Z,1492151249.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:29.508Z,1492151249.508 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:27:29.551Z,1492151249.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:29.572Z,1492151249.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:29.928Z,1492151249.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:29.962Z,1492151249.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:30.332Z,1492151250.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:30.364Z,1492151250.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:30.776Z,1492151250.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:30.853Z,1492151250.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:31.144Z,1492151251.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:31.174Z,1492151251.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:31.530Z,1492151251.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:31.546Z,1492151251.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:31.936Z,1492151251.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:31.971Z,1492151251.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:32.336Z,1492151252.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:32.359Z,1492151252.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:32.736Z,1492151252.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:32.744Z,1492151252.744 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:27:32.744Z,1492151252.744 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:27:32.744Z,1492151252.744 [BPC1](ERROR): Data Fault
2017-04-14T06:27:32.753Z,1492151252.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:32.814Z,1492151252.814 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:27:33.148Z,1492151253.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:33.179Z,1492151253.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:33.533Z,1492151253.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:33.554Z,1492151253.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:33.933Z,1492151253.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:33.949Z,1492151253.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:33.984Z,1492151253.984 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:27:33.984Z,1492151253.984 [BPC1] No Fault, FailCount= 1
2017-04-14T06:27:34.340Z,1492151254.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:34.481Z,1492151254.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:34.723Z,1492151254.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:34.751Z,1492151254.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:35.124Z,1492151255.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:35.184Z,1492151255.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:35.541Z,1492151255.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:35.558Z,1492151255.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:35.924Z,1492151255.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:35.951Z,1492151255.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:36.324Z,1492151256.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:36.361Z,1492151256.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:36.723Z,1492151256.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:36.740Z,1492151256.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:37.141Z,1492151257.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:37.174Z,1492151257.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:37.544Z,1492151257.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:37.571Z,1492151257.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:37.964Z,1492151257.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:37.986Z,1492151257.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:38.344Z,1492151258.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:38.370Z,1492151258.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:38.733Z,1492151258.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:38.749Z,1492151258.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:39.139Z,1492151259.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:39.156Z,1492151259.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:39.535Z,1492151259.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:39.551Z,1492151259.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:39.924Z,1492151259.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:39.955Z,1492151259.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:40.340Z,1492151260.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:40.356Z,1492151260.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:40.761Z,1492151260.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:40.803Z,1492151260.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:41.142Z,1492151261.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:41.164Z,1492151261.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:41.526Z,1492151261.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:41.566Z,1492151261.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:41.928Z,1492151261.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:41.956Z,1492151261.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:42.350Z,1492151262.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:42.366Z,1492151262.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:42.787Z,1492151262.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:42.854Z,1492151262.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:43.131Z,1492151263.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:43.147Z,1492151263.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:43.542Z,1492151263.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:43.558Z,1492151263.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:43.943Z,1492151263.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:43.963Z,1492151263.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:44.347Z,1492151264.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:44.383Z,1492151264.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:44.755Z,1492151264.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:44.822Z,1492151264.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:45.148Z,1492151265.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:45.164Z,1492151265.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:45.548Z,1492151265.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:45.564Z,1492151265.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:45.960Z,1492151265.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:46.000Z,1492151266.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:46.330Z,1492151266.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:46.358Z,1492151266.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:46.745Z,1492151266.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:46.778Z,1492151266.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:47.138Z,1492151267.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:47.201Z,1492151267.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:47.524Z,1492151267.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:47.555Z,1492151267.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:47.928Z,1492151267.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:48.009Z,1492151268.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:48.324Z,1492151268.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:48.358Z,1492151268.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:48.723Z,1492151268.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:48.782Z,1492151268.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:49.132Z,1492151269.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:49.190Z,1492151269.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:49.530Z,1492151269.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:49.548Z,1492151269.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:49.934Z,1492151269.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:49.955Z,1492151269.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:50.323Z,1492151270.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:50.354Z,1492151270.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:50.723Z,1492151270.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:50.739Z,1492151270.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:51.131Z,1492151271.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:51.168Z,1492151271.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:51.537Z,1492151271.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:51.574Z,1492151271.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:51.928Z,1492151271.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:51.944Z,1492151271.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:52.327Z,1492151272.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:52.356Z,1492151272.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:52.722Z,1492151272.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:52.754Z,1492151272.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:53.134Z,1492151273.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:53.150Z,1492151273.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:53.531Z,1492151273.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:53.553Z,1492151273.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:53.941Z,1492151273.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:53.962Z,1492151273.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:54.332Z,1492151274.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:54.360Z,1492151274.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:54.723Z,1492151274.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:54.759Z,1492151274.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:55.127Z,1492151275.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:55.156Z,1492151275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:55.531Z,1492151275.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:55.567Z,1492151275.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:55.932Z,1492151275.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:55.964Z,1492151275.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:56.328Z,1492151276.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:56.344Z,1492151276.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:56.810Z,1492151276.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:56.862Z,1492151276.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:56.862Z,1492151276.862 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:27:56.862Z,1492151276.862 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:27:56.869Z,1492151276.869 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:56.869Z,1492151276.869 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:27:56.869Z,1492151276.869 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:27:56.909Z,1492151276.908 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:27:56.909Z,1492151276.909 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:27:57.135Z,1492151277.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:57.238Z,1492151277.238 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:27:57.238Z,1492151277.238 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:27:57.243Z,1492151277.243 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:27:57.243Z,1492151277.243 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:27:57.548Z,1492151277.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:57.571Z,1492151277.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:27:57.572Z,1492151277.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:27:57.572Z,1492151277.572 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:27:57.585Z,1492151277.585 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:27:57.586Z,1492151277.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:27:57.586Z,1492151277.586 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:27:57.947Z,1492151277.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:57.978Z,1492151277.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:58.342Z,1492151278.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:58.375Z,1492151278.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:58.815Z,1492151278.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:58.897Z,1492151278.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:59.166Z,1492151279.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:59.202Z,1492151279.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:59.523Z,1492151279.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:59.564Z,1492151279.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:27:59.931Z,1492151279.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:27:59.956Z,1492151279.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:00.333Z,1492151280.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:00.359Z,1492151280.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:00.731Z,1492151280.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:00.748Z,1492151280.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:01.127Z,1492151281.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:01.193Z,1492151281.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:01.535Z,1492151281.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:01.589Z,1492151281.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:01.930Z,1492151281.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:01.954Z,1492151281.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:02.339Z,1492151282.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:02.435Z,1492151282.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:02.734Z,1492151282.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:02.762Z,1492151282.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:03.153Z,1492151283.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:03.211Z,1492151283.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:03.527Z,1492151283.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:03.575Z,1492151283.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:03.930Z,1492151283.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:03.962Z,1492151283.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:04.331Z,1492151284.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:04.397Z,1492151284.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:04.721Z,1492151284.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:04.758Z,1492151284.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:05.125Z,1492151285.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:05.162Z,1492151285.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:05.555Z,1492151285.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:05.572Z,1492151285.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:05.925Z,1492151285.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:05.954Z,1492151285.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:06.326Z,1492151286.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:06.354Z,1492151286.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:06.721Z,1492151286.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:06.742Z,1492151286.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:07.130Z,1492151287.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:07.170Z,1492151287.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:07.529Z,1492151287.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:07.545Z,1492151287.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:07.933Z,1492151287.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:07.949Z,1492151287.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:08.333Z,1492151288.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:08.354Z,1492151288.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:08.731Z,1492151288.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:08.778Z,1492151288.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:09.129Z,1492151289.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:09.150Z,1492151289.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:09.535Z,1492151289.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:09.551Z,1492151289.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:09.921Z,1492151289.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:09.962Z,1492151289.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:10.335Z,1492151290.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:10.351Z,1492151290.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:10.778Z,1492151290.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:10.836Z,1492151290.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:11.140Z,1492151291.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:11.174Z,1492151291.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:11.544Z,1492151291.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:11.580Z,1492151291.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:11.932Z,1492151291.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:11.964Z,1492151291.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:12.327Z,1492151292.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:12.344Z,1492151292.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:12.784Z,1492151292.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:12.804Z,1492151292.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:13.136Z,1492151293.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:13.158Z,1492151293.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:13.531Z,1492151293.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:13.548Z,1492151293.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:13.925Z,1492151293.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:13.956Z,1492151293.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:17.676Z,1492151297.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:17.776Z,1492151297.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:17.875Z,1492151297.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:17.912Z,1492151297.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:18.239Z,1492151298.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:18.300Z,1492151298.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:18.635Z,1492151298.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:18.672Z,1492151298.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:19.033Z,1492151299.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:19.086Z,1492151299.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:19.429Z,1492151299.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:19.490Z,1492151299.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:19.837Z,1492151299.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:19.869Z,1492151299.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:20.237Z,1492151300.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:20.268Z,1492151300.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:20.656Z,1492151300.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:20.672Z,1492151300.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:21.041Z,1492151301.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:21.066Z,1492151301.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:21.444Z,1492151301.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:21.470Z,1492151301.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:21.854Z,1492151301.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:22.015Z,1492151302.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:22.231Z,1492151302.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:22.246Z,1492151302.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:22.634Z,1492151302.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:22.650Z,1492151302.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:23.029Z,1492151303.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:23.050Z,1492151303.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:23.434Z,1492151303.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:23.449Z,1492151303.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:23.828Z,1492151303.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:23.854Z,1492151303.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:24.238Z,1492151304.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:24.258Z,1492151304.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:24.643Z,1492151304.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:24.658Z,1492151304.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:25.039Z,1492151305.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:25.070Z,1492151305.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:25.445Z,1492151305.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:25.470Z,1492151305.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:25.843Z,1492151305.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:25.878Z,1492151305.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:26.246Z,1492151306.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:26.273Z,1492151306.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:26.637Z,1492151306.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:26.745Z,1492151306.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:27.041Z,1492151307.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:27.076Z,1492151307.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:27.433Z,1492151307.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:27.454Z,1492151307.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:27.841Z,1492151307.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:27.878Z,1492151307.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:28.238Z,1492151308.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:28.258Z,1492151308.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:28.637Z,1492151308.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:28.653Z,1492151308.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:29.043Z,1492151309.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:29.060Z,1492151309.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:29.439Z,1492151309.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:29.471Z,1492151309.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:29.834Z,1492151309.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:29.902Z,1492151309.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:30.269Z,1492151310.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:30.412Z,1492151310.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:30.691Z,1492151310.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:30.712Z,1492151310.712 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:28:30.712Z,1492151310.712 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:28:30.712Z,1492151310.712 [BPC1](ERROR): Data Fault
2017-04-14T06:28:30.753Z,1492151310.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:30.868Z,1492151310.868 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:28:31.080Z,1492151311.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:31.129Z,1492151311.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:31.448Z,1492151311.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:31.477Z,1492151311.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:31.835Z,1492151311.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:31.881Z,1492151311.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:31.932Z,1492151311.932 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:28:31.932Z,1492151311.932 [BPC1] No Fault, FailCount= 1
2017-04-14T06:28:32.238Z,1492151312.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:32.400Z,1492151312.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:32.636Z,1492151312.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:32.669Z,1492151312.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:33.030Z,1492151313.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:33.094Z,1492151313.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:33.442Z,1492151313.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:33.458Z,1492151313.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:33.847Z,1492151313.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:33.864Z,1492151313.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:34.229Z,1492151314.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:34.263Z,1492151314.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:34.636Z,1492151314.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:34.689Z,1492151314.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:35.038Z,1492151315.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:35.060Z,1492151315.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:35.447Z,1492151315.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:35.463Z,1492151315.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:35.851Z,1492151315.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:35.868Z,1492151315.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:36.252Z,1492151316.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:36.274Z,1492151316.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:36.648Z,1492151316.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:36.670Z,1492151316.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:37.029Z,1492151317.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:37.062Z,1492151317.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:37.437Z,1492151317.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:37.473Z,1492151317.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:37.829Z,1492151317.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:37.886Z,1492151317.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:38.227Z,1492151318.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:38.243Z,1492151318.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:38.634Z,1492151318.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:38.758Z,1492151318.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:39.033Z,1492151319.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:39.066Z,1492151319.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:39.440Z,1492151319.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:39.456Z,1492151319.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:39.844Z,1492151319.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:39.860Z,1492151319.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:40.241Z,1492151320.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:40.292Z,1492151320.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:40.691Z,1492151320.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:40.750Z,1492151320.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:41.066Z,1492151321.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:41.082Z,1492151321.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:41.452Z,1492151321.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:41.486Z,1492151321.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:41.849Z,1492151321.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:41.874Z,1492151321.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:42.233Z,1492151322.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:42.282Z,1492151322.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:42.632Z,1492151322.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:42.660Z,1492151322.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:43.033Z,1492151323.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:43.056Z,1492151323.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:43.445Z,1492151323.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:43.467Z,1492151323.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:43.842Z,1492151323.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:43.953Z,1492151323.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:44.229Z,1492151324.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:44.256Z,1492151324.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:44.632Z,1492151324.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:44.652Z,1492151324.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:45.038Z,1492151325.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:45.095Z,1492151325.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:45.429Z,1492151325.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:45.462Z,1492151325.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:45.856Z,1492151325.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:45.902Z,1492151325.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:46.249Z,1492151326.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:46.264Z,1492151326.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:46.629Z,1492151326.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:46.694Z,1492151326.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:47.049Z,1492151327.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:47.106Z,1492151327.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:47.429Z,1492151327.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:47.456Z,1492151327.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:47.829Z,1492151327.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:47.856Z,1492151327.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:48.250Z,1492151328.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:48.270Z,1492151328.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:48.635Z,1492151328.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:48.670Z,1492151328.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:49.033Z,1492151329.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:49.049Z,1492151329.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:49.437Z,1492151329.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:49.477Z,1492151329.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:49.836Z,1492151329.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:49.852Z,1492151329.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:50.240Z,1492151330.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:50.256Z,1492151330.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:50.637Z,1492151330.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:50.666Z,1492151330.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:51.029Z,1492151331.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:51.062Z,1492151331.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:51.429Z,1492151331.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:51.457Z,1492151331.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:51.848Z,1492151331.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:51.864Z,1492151331.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:52.229Z,1492151332.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:52.274Z,1492151332.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:52.625Z,1492151332.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:52.721Z,1492151332.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:53.043Z,1492151333.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:53.072Z,1492151333.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:53.430Z,1492151333.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:53.450Z,1492151333.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:53.834Z,1492151333.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:53.850Z,1492151333.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:54.238Z,1492151334.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:54.254Z,1492151334.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:54.677Z,1492151334.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:54.739Z,1492151334.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:55.048Z,1492151335.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:55.070Z,1492151335.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:55.452Z,1492151335.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:55.468Z,1492151335.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:55.829Z,1492151335.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:55.858Z,1492151335.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:56.229Z,1492151336.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:56.270Z,1492151336.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:56.631Z,1492151336.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:56.667Z,1492151336.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:57.051Z,1492151337.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:57.067Z,1492151337.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:57.432Z,1492151337.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:57.461Z,1492151337.461 [BPC1](ERROR): Failed to parse message.
2017-04-14T06:28:57.462Z,1492151337.462 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:28:57.462Z,1492151337.462 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:28:57.462Z,1492151337.462 [BPC1](ERROR): Data Fault
2017-04-14T06:28:57.471Z,1492151337.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:57.531Z,1492151337.531 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:28:57.835Z,1492151337.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:57.873Z,1492151337.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:58.233Z,1492151338.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:58.248Z,1492151338.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:58.654Z,1492151338.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:58.682Z,1492151338.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:58.702Z,1492151338.703 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:28:58.703Z,1492151338.703 [BPC1] No Fault, FailCount= 1
2017-04-14T06:28:59.032Z,1492151339.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:59.114Z,1492151339.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:59.451Z,1492151339.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:59.495Z,1492151339.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:28:59.852Z,1492151339.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:28:59.886Z,1492151339.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:00.237Z,1492151340.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:00.252Z,1492151340.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:00.629Z,1492151340.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:00.664Z,1492151340.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:01.031Z,1492151341.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:01.053Z,1492151341.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:01.429Z,1492151341.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:01.463Z,1492151341.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:01.833Z,1492151341.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:01.861Z,1492151341.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:02.227Z,1492151342.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:02.262Z,1492151342.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:02.629Z,1492151342.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:02.650Z,1492151342.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:03.033Z,1492151343.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:03.076Z,1492151343.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:03.433Z,1492151343.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:03.474Z,1492151343.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:03.859Z,1492151343.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:03.922Z,1492151343.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:04.244Z,1492151344.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:04.315Z,1492151344.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:04.659Z,1492151344.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:04.713Z,1492151344.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:05.064Z,1492151345.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:05.084Z,1492151345.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:05.435Z,1492151345.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:05.479Z,1492151345.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:05.948Z,1492151345.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:05.987Z,1492151345.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:06.270Z,1492151346.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:06.324Z,1492151346.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:06.720Z,1492151346.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:06.796Z,1492151346.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:07.043Z,1492151347.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:07.075Z,1492151347.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:07.448Z,1492151347.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:07.485Z,1492151347.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:07.850Z,1492151347.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:07.875Z,1492151347.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:08.267Z,1492151348.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:08.299Z,1492151348.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:08.706Z,1492151348.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:08.742Z,1492151348.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:09.053Z,1492151349.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:09.074Z,1492151349.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:09.456Z,1492151349.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:09.481Z,1492151349.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:09.857Z,1492151349.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:09.934Z,1492151349.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:10.239Z,1492151350.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:10.306Z,1492151350.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:10.635Z,1492151350.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:10.669Z,1492151350.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:11.049Z,1492151351.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:11.108Z,1492151351.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:11.442Z,1492151351.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:11.458Z,1492151351.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:11.835Z,1492151351.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:11.891Z,1492151351.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:12.237Z,1492151352.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:12.345Z,1492151352.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:12.635Z,1492151352.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:12.672Z,1492151352.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:13.031Z,1492151353.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:13.060Z,1492151353.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:13.435Z,1492151353.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:13.451Z,1492151353.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:13.836Z,1492151353.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:13.852Z,1492151353.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:14.235Z,1492151354.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:14.250Z,1492151354.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:17.667Z,1492151357.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:17.692Z,1492151357.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:17.803Z,1492151357.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:17.847Z,1492151357.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:18.154Z,1492151358.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:18.170Z,1492151358.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:18.555Z,1492151358.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:18.571Z,1492151358.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:18.949Z,1492151358.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:18.978Z,1492151358.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:19.357Z,1492151359.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:19.378Z,1492151359.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:19.752Z,1492151359.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:19.775Z,1492151359.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:20.149Z,1492151360.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:20.172Z,1492151360.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:20.549Z,1492151360.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:20.572Z,1492151360.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:20.946Z,1492151360.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:20.983Z,1492151360.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:21.345Z,1492151361.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:21.382Z,1492151361.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:21.753Z,1492151361.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:21.786Z,1492151361.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:21.792Z,1492151361.792 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:21.793Z,1492151361.793 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T06:29:21.793Z,1492151361.793 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:29:21.806Z,1492151361.806 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:29:22.153Z,1492151362.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:22.185Z,1492151362.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:22.204Z,1492151362.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:29:22.204Z,1492151362.204 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T06:29:22.548Z,1492151362.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:22.658Z,1492151362.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:22.685Z,1492151362.685 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:29:22.685Z,1492151362.685 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:29:22.686Z,1492151362.686 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:29:22.945Z,1492151362.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:22.978Z,1492151362.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:23.349Z,1492151363.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:23.405Z,1492151363.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:23.746Z,1492151363.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:23.774Z,1492151363.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:24.146Z,1492151364.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:24.195Z,1492151364.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:24.547Z,1492151364.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:24.693Z,1492151364.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:24.975Z,1492151364.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:24.991Z,1492151364.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:25.358Z,1492151365.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:25.389Z,1492151365.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:25.738Z,1492151365.738 [NAL9602](INFO): SBD MO Status=2, MOMSN=2119, MT Status=2, MTMSN=0
2017-04-14T06:29:25.738Z,1492151365.738 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:29:25.756Z,1492151365.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:25.792Z,1492151365.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:26.165Z,1492151366.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:26.189Z,1492151366.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:26.548Z,1492151366.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:26.580Z,1492151366.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:26.954Z,1492151366.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:26.978Z,1492151366.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:27.357Z,1492151367.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:27.378Z,1492151367.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:27.757Z,1492151367.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:27.774Z,1492151367.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:28.143Z,1492151368.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:28.182Z,1492151368.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:28.546Z,1492151368.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:28.570Z,1492151368.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:28.955Z,1492151368.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:28.975Z,1492151368.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:29.354Z,1492151369.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:29.370Z,1492151369.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:29.755Z,1492151369.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:29.811Z,1492151369.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:30.168Z,1492151370.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:30.183Z,1492151370.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:30.559Z,1492151370.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:30.588Z,1492151370.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:30.951Z,1492151370.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:30.966Z,1492151370.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:31.353Z,1492151371.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:31.368Z,1492151371.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:31.751Z,1492151371.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:31.767Z,1492151371.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:32.156Z,1492151372.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:32.172Z,1492151372.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:32.554Z,1492151372.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:32.574Z,1492151372.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:32.955Z,1492151372.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:32.971Z,1492151372.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:33.350Z,1492151373.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:33.373Z,1492151373.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:33.770Z,1492151373.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:33.818Z,1492151373.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:34.166Z,1492151374.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:34.186Z,1492151374.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:34.550Z,1492151374.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:34.633Z,1492151374.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:34.961Z,1492151374.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:35.014Z,1492151375.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:35.362Z,1492151375.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:35.463Z,1492151375.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:35.756Z,1492151375.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:35.789Z,1492151375.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:36.145Z,1492151376.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:36.204Z,1492151376.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:36.559Z,1492151376.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:36.674Z,1492151376.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:36.946Z,1492151376.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:37.013Z,1492151377.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:37.345Z,1492151377.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:37.408Z,1492151377.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:37.745Z,1492151377.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:37.782Z,1492151377.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:38.149Z,1492151378.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:38.176Z,1492151378.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:38.550Z,1492151378.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:38.585Z,1492151378.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:38.963Z,1492151378.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:38.996Z,1492151378.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:39.355Z,1492151379.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:39.371Z,1492151379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:39.759Z,1492151379.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:39.804Z,1492151379.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:40.169Z,1492151380.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:40.302Z,1492151380.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:40.553Z,1492151380.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:40.587Z,1492151380.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:40.963Z,1492151380.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:40.979Z,1492151380.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:41.354Z,1492151381.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:41.371Z,1492151381.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:41.796Z,1492151381.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:41.815Z,1492151381.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:42.156Z,1492151382.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:42.180Z,1492151382.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:42.547Z,1492151382.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:42.603Z,1492151382.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:42.945Z,1492151382.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:42.991Z,1492151382.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:43.353Z,1492151383.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:43.386Z,1492151383.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:43.753Z,1492151383.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:43.780Z,1492151383.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:44.153Z,1492151384.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:44.194Z,1492151384.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:44.554Z,1492151384.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:44.572Z,1492151384.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:44.956Z,1492151384.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:44.972Z,1492151384.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:45.353Z,1492151385.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:45.374Z,1492151385.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:45.765Z,1492151385.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:45.780Z,1492151385.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:46.175Z,1492151386.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:46.201Z,1492151386.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:46.551Z,1492151386.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:46.567Z,1492151386.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:46.950Z,1492151386.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:46.994Z,1492151386.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:47.350Z,1492151387.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:47.367Z,1492151387.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:47.753Z,1492151387.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:47.792Z,1492151387.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:48.158Z,1492151388.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:48.241Z,1492151388.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:48.614Z,1492151388.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:48.674Z,1492151388.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:48.962Z,1492151388.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:49.014Z,1492151389.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:49.357Z,1492151389.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:49.373Z,1492151389.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:49.756Z,1492151389.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:49.807Z,1492151389.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:50.156Z,1492151390.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:50.214Z,1492151390.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:50.608Z,1492151390.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:50.660Z,1492151390.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:50.950Z,1492151390.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:50.965Z,1492151390.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:51.357Z,1492151391.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:51.400Z,1492151391.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:51.755Z,1492151391.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:51.771Z,1492151391.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:52.155Z,1492151392.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:52.172Z,1492151392.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:52.562Z,1492151392.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:52.593Z,1492151392.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:52.955Z,1492151392.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:52.974Z,1492151392.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:53.358Z,1492151393.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:53.381Z,1492151393.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:53.748Z,1492151393.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:53.776Z,1492151393.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:54.158Z,1492151394.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:54.174Z,1492151394.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:54.554Z,1492151394.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:54.570Z,1492151394.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:54.930Z,1492151394.930 [NAL9602](INFO): SBD MO Status=2, MOMSN=2119, MT Status=2, MTMSN=0
2017-04-14T06:29:54.930Z,1492151394.930 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:29:54.949Z,1492151394.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:55.003Z,1492151395.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:55.364Z,1492151395.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:55.394Z,1492151395.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:55.747Z,1492151395.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:55.763Z,1492151395.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:56.151Z,1492151396.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:56.167Z,1492151396.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:56.560Z,1492151396.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:56.592Z,1492151396.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:56.953Z,1492151396.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:56.969Z,1492151396.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:57.359Z,1492151397.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:57.375Z,1492151397.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:57.758Z,1492151397.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:57.775Z,1492151397.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:58.153Z,1492151398.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:58.173Z,1492151398.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:58.548Z,1492151398.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:58.581Z,1492151398.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:58.951Z,1492151398.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:58.975Z,1492151398.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:59.364Z,1492151399.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:59.394Z,1492151399.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:29:59.764Z,1492151399.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:29:59.790Z,1492151399.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:00.157Z,1492151400.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:00.189Z,1492151400.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:00.568Z,1492151400.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:00.621Z,1492151400.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:00.958Z,1492151400.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:01.014Z,1492151401.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:01.365Z,1492151401.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:01.386Z,1492151401.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:01.746Z,1492151401.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:01.798Z,1492151401.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:02.150Z,1492151402.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:02.177Z,1492151402.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:02.608Z,1492151402.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:02.699Z,1492151402.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:02.954Z,1492151402.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:02.999Z,1492151402.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:03.354Z,1492151403.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:03.384Z,1492151403.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:03.758Z,1492151403.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:03.784Z,1492151403.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:04.150Z,1492151404.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:04.170Z,1492151404.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:04.604Z,1492151404.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:04.648Z,1492151404.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:04.950Z,1492151404.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:04.983Z,1492151404.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:05.353Z,1492151405.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:05.370Z,1492151405.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:05.746Z,1492151405.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:05.762Z,1492151405.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:06.157Z,1492151406.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:06.252Z,1492151406.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:06.545Z,1492151406.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:06.582Z,1492151406.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:06.945Z,1492151406.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:06.972Z,1492151406.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:07.345Z,1492151407.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:07.378Z,1492151407.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:07.749Z,1492151407.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:07.776Z,1492151407.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:08.145Z,1492151408.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:08.188Z,1492151408.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:08.553Z,1492151408.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:08.581Z,1492151408.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:08.957Z,1492151408.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:08.982Z,1492151408.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:09.357Z,1492151409.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:09.390Z,1492151409.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:09.753Z,1492151409.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:09.784Z,1492151409.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:10.152Z,1492151410.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:10.237Z,1492151410.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:10.546Z,1492151410.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:10.573Z,1492151410.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:10.953Z,1492151410.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:10.981Z,1492151410.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:11.357Z,1492151411.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:11.386Z,1492151411.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:11.755Z,1492151411.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:11.788Z,1492151411.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:12.154Z,1492151412.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:12.250Z,1492151412.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:12.553Z,1492151412.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:12.582Z,1492151412.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:12.966Z,1492151412.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:12.990Z,1492151412.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:13.349Z,1492151413.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:13.402Z,1492151413.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:13.745Z,1492151413.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:13.803Z,1492151413.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:14.143Z,1492151414.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:14.168Z,1492151414.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:14.562Z,1492151414.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:14.622Z,1492151414.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:18.086Z,1492151418.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:18.102Z,1492151418.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:18.214Z,1492151418.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:18.285Z,1492151418.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:18.595Z,1492151418.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:18.676Z,1492151418.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:18.969Z,1492151418.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:18.986Z,1492151418.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:19.365Z,1492151419.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:19.382Z,1492151419.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:19.742Z,1492151419.742 [NAL9602](INFO): SBD MO Status=2, MOMSN=2119, MT Status=2, MTMSN=0
2017-04-14T06:30:19.742Z,1492151419.742 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T06:30:19.767Z,1492151419.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:19.799Z,1492151419.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:20.220Z,1492151420.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:20.296Z,1492151420.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:20.564Z,1492151420.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:20.598Z,1492151420.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:20.964Z,1492151420.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:20.982Z,1492151420.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:21.365Z,1492151421.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:21.381Z,1492151421.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:21.766Z,1492151421.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:21.782Z,1492151421.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:22.206Z,1492151422.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:22.259Z,1492151422.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:22.562Z,1492151422.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:22.593Z,1492151422.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:22.969Z,1492151422.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:22.985Z,1492151422.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:23.360Z,1492151423.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:23.392Z,1492151423.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:23.755Z,1492151423.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:23.790Z,1492151423.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:24.201Z,1492151424.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:24.255Z,1492151424.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:24.584Z,1492151424.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:24.606Z,1492151424.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:24.957Z,1492151424.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:24.993Z,1492151424.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:25.365Z,1492151425.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:25.405Z,1492151425.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:25.761Z,1492151425.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:25.804Z,1492151425.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:26.218Z,1492151426.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:26.269Z,1492151426.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:26.579Z,1492151426.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:26.595Z,1492151426.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:26.973Z,1492151426.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:26.990Z,1492151426.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:27.357Z,1492151427.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:27.386Z,1492151427.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:27.768Z,1492151427.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:27.791Z,1492151427.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:28.157Z,1492151428.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:28.257Z,1492151428.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:28.567Z,1492151428.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:28.595Z,1492151428.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:28.957Z,1492151428.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:28.985Z,1492151428.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:29.357Z,1492151429.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:29.438Z,1492151429.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:29.760Z,1492151429.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:29.824Z,1492151429.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:30.178Z,1492151430.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:30.237Z,1492151430.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:30.613Z,1492151430.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:30.689Z,1492151430.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:30.964Z,1492151430.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:31.017Z,1492151431.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:31.367Z,1492151431.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:31.417Z,1492151431.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:31.793Z,1492151431.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:31.822Z,1492151431.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:32.167Z,1492151432.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:32.183Z,1492151432.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:32.590Z,1492151432.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:32.632Z,1492151432.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:32.974Z,1492151432.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:32.998Z,1492151432.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:33.357Z,1492151433.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:33.385Z,1492151433.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:33.771Z,1492151433.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:33.800Z,1492151433.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:34.224Z,1492151434.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:34.276Z,1492151434.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:34.567Z,1492151434.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:34.582Z,1492151434.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:34.972Z,1492151434.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:34.988Z,1492151434.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:35.372Z,1492151435.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:35.388Z,1492151435.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:35.764Z,1492151435.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:35.780Z,1492151435.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:36.217Z,1492151436.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:36.268Z,1492151436.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:36.568Z,1492151436.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:36.600Z,1492151436.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:36.968Z,1492151436.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:36.983Z,1492151436.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:37.380Z,1492151437.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:37.406Z,1492151437.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:37.769Z,1492151437.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:37.785Z,1492151437.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:38.247Z,1492151438.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:38.306Z,1492151438.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:38.568Z,1492151438.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:38.604Z,1492151438.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:38.959Z,1492151438.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:39.012Z,1492151439.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:39.359Z,1492151439.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:39.407Z,1492151439.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:39.768Z,1492151439.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:39.784Z,1492151439.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:40.219Z,1492151440.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:40.239Z,1492151440.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:40.575Z,1492151440.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:40.591Z,1492151440.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:40.975Z,1492151440.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:40.992Z,1492151440.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:41.371Z,1492151441.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:41.388Z,1492151441.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:41.766Z,1492151441.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:41.819Z,1492151441.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:42.158Z,1492151442.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:42.290Z,1492151442.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:42.573Z,1492151442.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:42.609Z,1492151442.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:42.966Z,1492151442.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:43.006Z,1492151443.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:43.365Z,1492151443.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:43.381Z,1492151443.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:43.765Z,1492151443.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:43.820Z,1492151443.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:44.166Z,1492151444.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:44.216Z,1492151444.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:44.570Z,1492151444.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:44.614Z,1492151444.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:44.976Z,1492151444.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:45.022Z,1492151445.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:45.366Z,1492151445.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:45.382Z,1492151445.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:45.772Z,1492151445.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:45.789Z,1492151445.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:46.165Z,1492151446.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:46.181Z,1492151446.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:46.583Z,1492151446.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:46.616Z,1492151446.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:46.962Z,1492151446.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:46.998Z,1492151446.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:47.361Z,1492151447.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:47.384Z,1492151447.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:47.769Z,1492151447.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:47.789Z,1492151447.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:48.260Z,1492151448.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:48.330Z,1492151448.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:48.562Z,1492151448.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:48.614Z,1492151448.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:48.959Z,1492151448.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:49.005Z,1492151449.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:49.367Z,1492151449.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:49.383Z,1492151449.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:49.769Z,1492151449.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:49.785Z,1492151449.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:50.238Z,1492151450.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:50.269Z,1492151450.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:50.575Z,1492151450.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:50.625Z,1492151450.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:50.964Z,1492151450.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:50.987Z,1492151450.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:51.375Z,1492151451.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:51.391Z,1492151451.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:51.773Z,1492151451.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:51.790Z,1492151451.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:52.223Z,1492151452.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:52.252Z,1492151452.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:52.561Z,1492151452.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:52.599Z,1492151452.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:52.942Z,1492151452.942 [NAL9602](INFO): SBD MO Status=0, MOMSN=2119, MT Status=0, MTMSN=0
2017-04-14T06:30:52.942Z,1492151452.942 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:30:52.961Z,1492151452.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:53.010Z,1492151453.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:53.364Z,1492151453.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:53.396Z,1492151453.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:53.780Z,1492151453.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:53.820Z,1492151453.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:54.195Z,1492151454.195 [NAL9602](INFO): GPS fix at 20170414T063110: (36.802346, -121.787116)
2017-04-14T06:30:54.216Z,1492151454.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:54.291Z,1492151454.291 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:30:54.292Z,1492151454.292 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:30:54.593Z,1492151454.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:54.643Z,1492151454.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:54.643Z,1492151454.643 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:30:54.643Z,1492151454.643 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:30:54.666Z,1492151454.666 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:30:54.666Z,1492151454.666 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:30:54.666Z,1492151454.666 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:30:54.716Z,1492151454.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:30:54.717Z,1492151454.717 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:30:55.029Z,1492151455.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:55.120Z,1492151455.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:30:55.120Z,1492151455.121 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:30:55.121Z,1492151455.121 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:30:55.121Z,1492151455.121 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:30:55.421Z,1492151455.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:30:55.456Z,1492151455.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:30:55.457Z,1492151455.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:30:55.457Z,1492151455.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:30:55.462Z,1492151455.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:30:55.463Z,1492151455.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:30:55.463Z,1492151455.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:31:00.999Z,1492151460.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:01.044Z,1492151461.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:01.124Z,1492151461.124 [DataOverHttps](INFO): Sending 81 bytes from file Logs/20170414T032153/Courier0108.lzma
2017-04-14T06:31:01.144Z,1492151461.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:01.160Z,1492151461.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:01.513Z,1492151461.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:01.558Z,1492151461.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:01.894Z,1492151461.894 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0108.lzma.bak
2017-04-14T06:31:01.894Z,1492151461.894 [DataOverHttps](INFO): SBD MOMSN=4885361
2017-04-14T06:31:01.921Z,1492151461.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:01.965Z,1492151461.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:02.345Z,1492151462.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:02.362Z,1492151462.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:02.721Z,1492151462.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:02.752Z,1492151462.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:07.532Z,1492151467.532 [NAL9602](INFO): Powering down
2017-04-14T06:31:07.570Z,1492151467.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:07.622Z,1492151467.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:07.722Z,1492151467.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:07.762Z,1492151467.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:08.128Z,1492151468.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:08.172Z,1492151468.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:08.501Z,1492151468.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:08.536Z,1492151468.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:08.905Z,1492151468.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:08.933Z,1492151468.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:09.305Z,1492151469.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:09.338Z,1492151469.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:13.054Z,1492151473.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:13.103Z,1492151473.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:13.194Z,1492151473.194 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0109.lzma
2017-04-14T06:31:13.215Z,1492151473.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:13.262Z,1492151473.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:13.601Z,1492151473.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:13.617Z,1492151473.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:13.978Z,1492151473.978 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0109.lzma.bak
2017-04-14T06:31:13.979Z,1492151473.979 [DataOverHttps](INFO): SBD MOMSN=4885364
2017-04-14T06:31:14.006Z,1492151474.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:14.070Z,1492151474.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:14.462Z,1492151474.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:14.530Z,1492151474.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:14.565Z,1492151474.565 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:31:14.565Z,1492151474.565 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:31:14.565Z,1492151474.565 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:31:14.803Z,1492151474.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:14.858Z,1492151474.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:18.732Z,1492151478.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:18.801Z,1492151478.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:18.911Z,1492151478.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:18.960Z,1492151478.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:19.266Z,1492151479.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:19.293Z,1492151479.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:19.673Z,1492151479.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:19.688Z,1492151479.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:20.108Z,1492151480.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:20.170Z,1492151480.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:20.476Z,1492151480.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:20.494Z,1492151480.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:20.872Z,1492151480.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:20.888Z,1492151480.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:21.289Z,1492151481.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:21.337Z,1492151481.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:21.669Z,1492151481.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:21.694Z,1492151481.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:22.093Z,1492151482.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:22.185Z,1492151482.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:22.461Z,1492151482.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:22.485Z,1492151482.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:22.873Z,1492151482.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:22.903Z,1492151482.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:23.261Z,1492151483.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:23.276Z,1492151483.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:23.669Z,1492151483.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:23.705Z,1492151483.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:24.069Z,1492151484.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:24.086Z,1492151484.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:24.461Z,1492151484.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:24.538Z,1492151484.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:24.861Z,1492151484.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:24.903Z,1492151484.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:25.264Z,1492151485.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:25.290Z,1492151485.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:25.665Z,1492151485.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:25.691Z,1492151485.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:26.061Z,1492151486.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:26.089Z,1492151486.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:26.498Z,1492151486.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:26.548Z,1492151486.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:26.869Z,1492151486.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:26.885Z,1492151486.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:27.269Z,1492151487.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:27.285Z,1492151487.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:27.670Z,1492151487.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:27.687Z,1492151487.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:28.065Z,1492151488.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:28.086Z,1492151488.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:28.489Z,1492151488.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:28.534Z,1492151488.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:28.878Z,1492151488.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:28.911Z,1492151488.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:29.261Z,1492151489.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:29.305Z,1492151489.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:29.670Z,1492151489.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:29.686Z,1492151489.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:30.186Z,1492151490.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:30.241Z,1492151490.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:30.462Z,1492151490.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:30.503Z,1492151490.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:30.869Z,1492151490.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:30.946Z,1492151490.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:31.261Z,1492151491.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:31.276Z,1492151491.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:31.669Z,1492151491.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:31.726Z,1492151491.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:32.120Z,1492151492.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:32.154Z,1492151492.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:32.462Z,1492151492.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:32.510Z,1492151492.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:32.924Z,1492151492.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:32.940Z,1492151492.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:33.294Z,1492151493.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:33.354Z,1492151493.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:33.659Z,1492151493.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:33.674Z,1492151493.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:34.132Z,1492151494.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:34.185Z,1492151494.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:34.475Z,1492151494.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:34.518Z,1492151494.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:34.870Z,1492151494.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:34.894Z,1492151494.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:35.265Z,1492151495.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:35.293Z,1492151495.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:35.661Z,1492151495.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:35.688Z,1492151495.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:36.123Z,1492151496.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:36.156Z,1492151496.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:36.461Z,1492151496.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:36.494Z,1492151496.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:36.861Z,1492151496.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:36.902Z,1492151496.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:37.258Z,1492151497.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:37.286Z,1492151497.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:37.669Z,1492151497.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:37.701Z,1492151497.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:38.066Z,1492151498.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:38.186Z,1492151498.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:38.476Z,1492151498.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:38.510Z,1492151498.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:38.870Z,1492151498.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:38.886Z,1492151498.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:39.272Z,1492151499.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:39.296Z,1492151499.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:39.662Z,1492151499.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:39.714Z,1492151499.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:40.070Z,1492151500.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:40.090Z,1492151500.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:40.471Z,1492151500.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:40.507Z,1492151500.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:40.865Z,1492151500.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:40.890Z,1492151500.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:41.281Z,1492151501.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:41.297Z,1492151501.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:41.678Z,1492151501.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:41.694Z,1492151501.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:42.061Z,1492151502.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:42.087Z,1492151502.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:42.478Z,1492151502.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:42.547Z,1492151502.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:42.876Z,1492151502.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:42.892Z,1492151502.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:43.273Z,1492151503.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:43.303Z,1492151503.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:43.663Z,1492151503.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:43.695Z,1492151503.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:44.108Z,1492151504.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:44.159Z,1492151504.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:44.469Z,1492151504.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:44.515Z,1492151504.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:44.884Z,1492151504.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:44.950Z,1492151504.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:45.268Z,1492151505.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:45.297Z,1492151505.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:45.683Z,1492151505.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:45.780Z,1492151505.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:46.138Z,1492151506.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:46.182Z,1492151506.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:46.469Z,1492151506.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:46.541Z,1492151506.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:46.861Z,1492151506.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:46.895Z,1492151506.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:47.259Z,1492151507.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:47.302Z,1492151507.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:47.669Z,1492151507.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:47.748Z,1492151507.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:48.102Z,1492151508.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:48.144Z,1492151508.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:48.461Z,1492151508.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:48.493Z,1492151508.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:48.861Z,1492151508.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:48.882Z,1492151508.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:49.261Z,1492151509.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:49.277Z,1492151509.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:49.690Z,1492151509.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:49.730Z,1492151509.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:50.102Z,1492151510.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:50.124Z,1492151510.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:50.473Z,1492151510.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:50.515Z,1492151510.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:50.870Z,1492151510.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:50.886Z,1492151510.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:51.285Z,1492151511.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:51.341Z,1492151511.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:51.672Z,1492151511.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:51.699Z,1492151511.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:52.111Z,1492151512.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:52.213Z,1492151512.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:52.475Z,1492151512.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:52.503Z,1492151512.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:52.877Z,1492151512.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:52.894Z,1492151512.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:53.262Z,1492151513.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:53.282Z,1492151513.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:53.672Z,1492151513.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:53.725Z,1492151513.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:54.073Z,1492151514.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:54.118Z,1492151514.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:54.473Z,1492151514.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:54.493Z,1492151514.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:54.872Z,1492151514.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:54.894Z,1492151514.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:55.262Z,1492151515.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:55.290Z,1492151515.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:55.666Z,1492151515.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:55.696Z,1492151515.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:56.104Z,1492151516.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:56.143Z,1492151516.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:56.464Z,1492151516.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:56.499Z,1492151516.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:56.862Z,1492151516.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:56.896Z,1492151516.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:57.270Z,1492151517.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:57.297Z,1492151517.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:57.665Z,1492151517.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:57.697Z,1492151517.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:58.116Z,1492151518.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:58.152Z,1492151518.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:58.469Z,1492151518.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:58.498Z,1492151518.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:58.861Z,1492151518.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:58.899Z,1492151518.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:59.265Z,1492151519.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:59.301Z,1492151519.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:31:59.662Z,1492151519.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:31:59.734Z,1492151519.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:00.112Z,1492151520.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:00.135Z,1492151520.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:00.463Z,1492151520.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:00.529Z,1492151520.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:00.874Z,1492151520.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:00.889Z,1492151520.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:01.269Z,1492151521.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:01.316Z,1492151521.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:01.669Z,1492151521.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:01.727Z,1492151521.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:02.107Z,1492151522.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:02.137Z,1492151522.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:02.488Z,1492151522.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:02.535Z,1492151522.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:02.897Z,1492151522.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:02.956Z,1492151522.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:03.262Z,1492151523.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:03.313Z,1492151523.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:03.663Z,1492151523.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:03.722Z,1492151523.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:04.079Z,1492151524.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:04.124Z,1492151524.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:04.469Z,1492151524.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:04.512Z,1492151524.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:04.869Z,1492151524.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:04.909Z,1492151524.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:05.268Z,1492151525.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:05.285Z,1492151525.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:05.669Z,1492151525.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:05.690Z,1492151525.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:06.120Z,1492151526.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:06.170Z,1492151526.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:06.470Z,1492151526.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:06.490Z,1492151526.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:06.869Z,1492151526.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:06.890Z,1492151526.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:07.272Z,1492151527.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:07.305Z,1492151527.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:07.661Z,1492151527.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:07.688Z,1492151527.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:08.061Z,1492151528.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:08.094Z,1492151528.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:08.466Z,1492151528.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:08.524Z,1492151528.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:08.861Z,1492151528.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:08.913Z,1492151528.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:09.286Z,1492151529.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:09.305Z,1492151529.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:09.674Z,1492151529.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:09.707Z,1492151529.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:10.097Z,1492151530.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:10.150Z,1492151530.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:10.521Z,1492151530.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:10.554Z,1492151530.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:10.870Z,1492151530.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:10.914Z,1492151530.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:11.271Z,1492151531.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:11.319Z,1492151531.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:11.673Z,1492151531.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:11.694Z,1492151531.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:12.098Z,1492151532.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:12.172Z,1492151532.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:12.461Z,1492151532.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:12.502Z,1492151532.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:12.865Z,1492151532.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:12.933Z,1492151532.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:13.267Z,1492151533.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:13.319Z,1492151533.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:13.672Z,1492151533.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:13.754Z,1492151533.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:14.083Z,1492151534.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:14.124Z,1492151534.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:14.470Z,1492151534.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:14.581Z,1492151534.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:14.873Z,1492151534.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:14.919Z,1492151534.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:18.432Z,1492151538.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:18.490Z,1492151538.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:18.607Z,1492151538.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:18.663Z,1492151538.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:18.985Z,1492151538.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:19.016Z,1492151539.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:19.525Z,1492151539.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:19.566Z,1492151539.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:19.784Z,1492151539.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:19.836Z,1492151539.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:20.192Z,1492151540.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:20.249Z,1492151540.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:20.577Z,1492151540.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:20.608Z,1492151540.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:20.976Z,1492151540.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:21.017Z,1492151541.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:21.375Z,1492151541.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:21.411Z,1492151541.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:21.777Z,1492151541.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:21.812Z,1492151541.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:22.232Z,1492151542.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:22.383Z,1492151542.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:22.544Z,1492151542.544 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:32:22.604Z,1492151542.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:22.648Z,1492151542.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:23.000Z,1492151543.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:23.052Z,1492151543.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:23.080Z,1492151543.080 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:23.080Z,1492151543.080 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:32:23.080Z,1492151543.080 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:32:23.137Z,1492151543.136 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:32:23.383Z,1492151543.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:23.432Z,1492151543.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:23.500Z,1492151543.500 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:32:23.501Z,1492151543.500 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:32:23.789Z,1492151543.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:23.837Z,1492151543.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:23.852Z,1492151543.852 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:32:23.853Z,1492151543.853 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:32:23.853Z,1492151543.853 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:32:24.197Z,1492151544.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:24.236Z,1492151544.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:24.596Z,1492151544.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:24.701Z,1492151544.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:24.980Z,1492151544.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:25.017Z,1492151545.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:25.376Z,1492151545.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:25.427Z,1492151545.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:25.781Z,1492151545.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:25.815Z,1492151545.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:26.185Z,1492151546.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:26.219Z,1492151546.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:26.586Z,1492151546.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:26.614Z,1492151546.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:26.986Z,1492151546.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:27.022Z,1492151547.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:27.378Z,1492151547.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:27.415Z,1492151547.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:27.780Z,1492151547.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:27.816Z,1492151547.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:28.177Z,1492151548.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:28.221Z,1492151548.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:28.585Z,1492151548.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:28.619Z,1492151548.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:28.990Z,1492151548.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:29.021Z,1492151549.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:29.385Z,1492151549.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:29.413Z,1492151549.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:29.785Z,1492151549.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:29.812Z,1492151549.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:30.186Z,1492151550.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:30.208Z,1492151550.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:30.586Z,1492151550.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:30.649Z,1492151550.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:30.985Z,1492151550.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:31.020Z,1492151551.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:31.374Z,1492151551.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:31.408Z,1492151551.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:31.785Z,1492151551.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:31.843Z,1492151551.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:32.186Z,1492151552.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:32.206Z,1492151552.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:32.590Z,1492151552.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:32.639Z,1492151552.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:32.989Z,1492151552.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:33.048Z,1492151553.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:33.377Z,1492151553.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:33.406Z,1492151553.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:33.789Z,1492151553.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:33.804Z,1492151553.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:34.177Z,1492151554.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:34.204Z,1492151554.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:34.593Z,1492151554.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:34.614Z,1492151554.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:34.981Z,1492151554.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:35.007Z,1492151555.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:35.381Z,1492151555.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:35.408Z,1492151555.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:35.777Z,1492151555.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:35.804Z,1492151555.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:36.174Z,1492151556.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:36.190Z,1492151556.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:36.582Z,1492151556.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:36.606Z,1492151556.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:36.994Z,1492151556.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:37.012Z,1492151557.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:37.374Z,1492151557.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:37.401Z,1492151557.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:37.777Z,1492151557.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:37.810Z,1492151557.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:38.177Z,1492151558.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:38.203Z,1492151558.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:38.577Z,1492151558.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:38.611Z,1492151558.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:38.989Z,1492151558.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:39.005Z,1492151559.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:39.377Z,1492151559.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:39.403Z,1492151559.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:39.775Z,1492151559.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:39.801Z,1492151559.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:40.187Z,1492151560.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:40.219Z,1492151560.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:40.583Z,1492151560.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:40.610Z,1492151560.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:41.033Z,1492151561.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:41.057Z,1492151561.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:41.385Z,1492151561.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:41.413Z,1492151561.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:41.779Z,1492151561.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:41.829Z,1492151561.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:42.178Z,1492151562.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:42.215Z,1492151562.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:42.598Z,1492151562.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:42.618Z,1492151562.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:42.982Z,1492151562.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:43.009Z,1492151563.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:43.378Z,1492151563.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:43.410Z,1492151563.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:43.782Z,1492151563.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:43.810Z,1492151563.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:44.177Z,1492151564.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:44.216Z,1492151564.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:44.577Z,1492151564.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:44.613Z,1492151564.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:44.985Z,1492151564.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:45.079Z,1492151565.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:45.377Z,1492151565.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:45.399Z,1492151565.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:45.781Z,1492151565.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:45.796Z,1492151565.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:46.186Z,1492151566.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:46.241Z,1492151566.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:46.586Z,1492151566.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:46.602Z,1492151566.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:46.987Z,1492151566.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:47.033Z,1492151567.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:47.389Z,1492151567.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:47.438Z,1492151567.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:47.789Z,1492151567.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:47.810Z,1492151567.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:48.185Z,1492151568.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:48.206Z,1492151568.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:48.587Z,1492151568.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:48.611Z,1492151568.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:48.991Z,1492151568.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:49.006Z,1492151569.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:49.389Z,1492151569.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:49.405Z,1492151569.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:49.793Z,1492151569.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:49.814Z,1492151569.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:50.177Z,1492151570.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:50.203Z,1492151570.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:50.577Z,1492151570.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:50.615Z,1492151570.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:50.977Z,1492151570.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:51.014Z,1492151571.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:51.378Z,1492151571.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:51.413Z,1492151571.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:51.781Z,1492151571.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:51.814Z,1492151571.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:52.177Z,1492151572.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:52.214Z,1492151572.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:52.586Z,1492151572.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:52.602Z,1492151572.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:53.003Z,1492151573.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:53.070Z,1492151573.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:53.388Z,1492151573.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:53.404Z,1492151573.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:53.784Z,1492151573.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:53.799Z,1492151573.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:54.185Z,1492151574.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:54.201Z,1492151574.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:54.587Z,1492151574.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:54.619Z,1492151574.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:54.990Z,1492151574.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:55.005Z,1492151575.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:55.385Z,1492151575.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:55.403Z,1492151575.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:55.793Z,1492151575.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:55.808Z,1492151575.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:56.186Z,1492151576.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:56.202Z,1492151576.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:56.592Z,1492151576.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:56.637Z,1492151576.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:56.989Z,1492151576.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:57.010Z,1492151577.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:57.389Z,1492151577.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:57.410Z,1492151577.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:57.789Z,1492151577.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:57.818Z,1492151577.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:58.223Z,1492151578.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:58.280Z,1492151578.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:58.587Z,1492151578.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:58.612Z,1492151578.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:58.989Z,1492151578.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:59.016Z,1492151579.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:59.397Z,1492151579.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:59.414Z,1492151579.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:32:59.800Z,1492151579.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:32:59.896Z,1492151579.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:00.183Z,1492151580.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:00.198Z,1492151580.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:00.585Z,1492151580.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:00.645Z,1492151580.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:00.980Z,1492151580.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:00.995Z,1492151580.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:01.381Z,1492151581.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:01.431Z,1492151581.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:01.785Z,1492151581.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:01.846Z,1492151581.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:02.188Z,1492151582.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:02.206Z,1492151582.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:02.586Z,1492151582.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:02.601Z,1492151582.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:02.987Z,1492151582.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:03.010Z,1492151583.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:03.390Z,1492151583.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:03.405Z,1492151583.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:03.777Z,1492151583.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:03.805Z,1492151583.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:04.179Z,1492151584.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:04.227Z,1492151584.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:04.587Z,1492151584.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:04.632Z,1492151584.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:04.987Z,1492151584.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:05.002Z,1492151585.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:05.391Z,1492151585.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:05.407Z,1492151585.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:05.778Z,1492151585.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:05.853Z,1492151585.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:06.176Z,1492151586.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:06.212Z,1492151586.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:06.578Z,1492151586.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:06.594Z,1492151586.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:06.983Z,1492151586.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:06.999Z,1492151586.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:07.377Z,1492151587.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:07.394Z,1492151587.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:07.790Z,1492151587.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:07.806Z,1492151587.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:08.187Z,1492151588.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:08.203Z,1492151588.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:08.585Z,1492151588.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:08.601Z,1492151588.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:08.985Z,1492151588.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:09.001Z,1492151589.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:09.385Z,1492151589.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:09.414Z,1492151589.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:09.786Z,1492151589.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:09.806Z,1492151589.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:10.185Z,1492151590.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:10.206Z,1492151590.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:10.589Z,1492151590.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:10.605Z,1492151590.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:10.985Z,1492151590.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:11.000Z,1492151591.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:11.393Z,1492151591.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:11.409Z,1492151591.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:11.784Z,1492151591.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:11.804Z,1492151591.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:12.186Z,1492151592.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:12.202Z,1492151592.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:12.584Z,1492151592.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:12.611Z,1492151592.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:12.986Z,1492151592.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:13.010Z,1492151593.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:13.393Z,1492151593.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:13.409Z,1492151593.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:13.777Z,1492151593.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:13.830Z,1492151593.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:14.189Z,1492151594.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:14.242Z,1492151594.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:14.586Z,1492151594.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:14.644Z,1492151594.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:15.003Z,1492151595.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:15.052Z,1492151595.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:19.783Z,1492151599.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:19.846Z,1492151599.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:19.978Z,1492151599.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:20.034Z,1492151600.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:20.359Z,1492151600.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:20.434Z,1492151600.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:20.761Z,1492151600.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:20.815Z,1492151600.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:21.161Z,1492151601.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:21.188Z,1492151601.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:21.557Z,1492151601.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:21.594Z,1492151601.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:21.997Z,1492151601.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:22.084Z,1492151602.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:22.372Z,1492151602.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:22.424Z,1492151602.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:22.759Z,1492151602.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:22.826Z,1492151602.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:23.157Z,1492151603.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:23.208Z,1492151603.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:23.558Z,1492151603.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:23.599Z,1492151603.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:24.001Z,1492151604.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:24.065Z,1492151604.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:24.383Z,1492151604.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:24.442Z,1492151604.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:24.758Z,1492151604.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:24.823Z,1492151604.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:25.159Z,1492151605.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:25.212Z,1492151605.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:25.557Z,1492151605.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:25.591Z,1492151605.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:25.956Z,1492151605.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:25.988Z,1492151605.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:26.364Z,1492151606.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:26.432Z,1492151606.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:26.766Z,1492151606.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:26.786Z,1492151606.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:27.167Z,1492151607.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:27.190Z,1492151607.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:27.557Z,1492151607.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:27.618Z,1492151607.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:27.957Z,1492151607.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:28.007Z,1492151608.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:28.366Z,1492151608.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:28.401Z,1492151608.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:28.766Z,1492151608.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:28.802Z,1492151608.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:29.116Z,1492151609.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:29.170Z,1492151609.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:29.203Z,1492151609.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:29.567Z,1492151609.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:29.599Z,1492151609.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:29.913Z,1492151609.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:30.009Z,1492151610.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:30.038Z,1492151610.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:30.379Z,1492151610.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:30.394Z,1492151610.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:30.444Z,1492151610.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:30.764Z,1492151610.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:30.816Z,1492151610.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:31.173Z,1492151611.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:31.199Z,1492151611.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:31.240Z,1492151611.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:31.575Z,1492151611.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:31.599Z,1492151611.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:31.980Z,1492151611.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:32.008Z,1492151612.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:32.036Z,1492151612.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:32.362Z,1492151612.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:32.407Z,1492151612.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:32.668Z,1492151612.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:32.764Z,1492151612.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:32.807Z,1492151612.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:33.165Z,1492151613.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:33.226Z,1492151613.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:33.464Z,1492151613.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:33.574Z,1492151613.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:33.589Z,1492151613.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:33.969Z,1492151613.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:34.014Z,1492151614.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:34.260Z,1492151614.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:34.366Z,1492151614.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:34.425Z,1492151614.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:34.664Z,1492151614.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:34.776Z,1492151614.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:34.792Z,1492151614.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:35.175Z,1492151615.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:35.223Z,1492151615.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:35.460Z,1492151615.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:35.566Z,1492151615.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:35.626Z,1492151615.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:35.968Z,1492151615.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:35.993Z,1492151615.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:36.256Z,1492151616.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:36.369Z,1492151616.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:36.389Z,1492151616.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:36.660Z,1492151616.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:36.771Z,1492151616.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:36.787Z,1492151616.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:37.171Z,1492151617.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:37.200Z,1492151617.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:37.557Z,1492151617.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:37.598Z,1492151617.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:37.959Z,1492151617.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:37.998Z,1492151617.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:38.365Z,1492151618.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:38.398Z,1492151618.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:38.761Z,1492151618.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:38.793Z,1492151618.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:39.154Z,1492151619.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:39.188Z,1492151619.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:39.564Z,1492151619.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:39.596Z,1492151619.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:39.966Z,1492151619.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:39.993Z,1492151619.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:40.361Z,1492151620.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:40.402Z,1492151620.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:40.761Z,1492151620.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:40.798Z,1492151620.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:41.154Z,1492151621.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:41.177Z,1492151621.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:41.565Z,1492151621.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:41.581Z,1492151621.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:41.973Z,1492151621.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:42.074Z,1492151622.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:42.367Z,1492151622.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:42.388Z,1492151622.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:42.769Z,1492151622.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:42.790Z,1492151622.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:43.175Z,1492151623.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:43.191Z,1492151623.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:43.567Z,1492151623.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:43.637Z,1492151623.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:43.994Z,1492151623.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:44.027Z,1492151624.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:44.362Z,1492151624.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:44.398Z,1492151624.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:44.765Z,1492151624.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:44.798Z,1492151624.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:45.163Z,1492151625.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:45.201Z,1492151625.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:45.566Z,1492151625.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:45.601Z,1492151625.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:45.973Z,1492151625.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:46.029Z,1492151626.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:46.389Z,1492151626.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:46.466Z,1492151626.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:46.767Z,1492151626.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:46.791Z,1492151626.791 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:33:46.799Z,1492151626.799 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:33:46.799Z,1492151626.799 [BPC1](ERROR): Data Fault
2017-04-14T06:33:46.825Z,1492151626.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:46.869Z,1492151626.869 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:33:47.160Z,1492151627.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:47.193Z,1492151627.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:47.562Z,1492151627.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:47.598Z,1492151627.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:48.009Z,1492151628.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:48.041Z,1492151628.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:48.081Z,1492151628.081 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:33:48.081Z,1492151628.081 [BPC1] No Fault, FailCount= 1
2017-04-14T06:33:48.371Z,1492151628.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:48.458Z,1492151628.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:48.768Z,1492151628.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:48.817Z,1492151628.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:49.169Z,1492151629.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:49.200Z,1492151629.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:49.565Z,1492151629.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:49.598Z,1492151629.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:49.971Z,1492151629.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:49.993Z,1492151629.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:50.381Z,1492151630.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:50.397Z,1492151630.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:50.768Z,1492151630.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:50.794Z,1492151630.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:51.159Z,1492151631.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:51.186Z,1492151631.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:51.581Z,1492151631.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:51.597Z,1492151631.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:51.961Z,1492151631.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:51.997Z,1492151631.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:52.372Z,1492151632.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:52.394Z,1492151632.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:52.763Z,1492151632.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:52.790Z,1492151632.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:53.157Z,1492151633.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:53.197Z,1492151633.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:53.575Z,1492151633.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:53.592Z,1492151633.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:53.961Z,1492151633.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:53.995Z,1492151633.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:54.361Z,1492151634.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:54.389Z,1492151634.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:54.762Z,1492151634.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:54.794Z,1492151634.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:55.161Z,1492151635.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:55.198Z,1492151635.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:55.567Z,1492151635.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:55.607Z,1492151635.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:55.607Z,1492151635.607 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:33:55.607Z,1492151635.607 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:33:55.613Z,1492151635.614 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:55.614Z,1492151635.614 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:33:55.614Z,1492151635.614 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:33:55.628Z,1492151635.628 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:33:55.628Z,1492151635.628 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:33:55.961Z,1492151635.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:56.032Z,1492151636.032 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:33:56.032Z,1492151636.033 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:33:56.033Z,1492151636.033 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:33:56.033Z,1492151636.033 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:33:56.372Z,1492151636.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:56.409Z,1492151636.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:33:56.409Z,1492151636.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:33:56.410Z,1492151636.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:33:56.415Z,1492151636.415 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:33:56.416Z,1492151636.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:33:56.416Z,1492151636.416 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:33:56.772Z,1492151636.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:56.809Z,1492151636.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:57.168Z,1492151637.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:57.185Z,1492151637.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:57.566Z,1492151637.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:57.581Z,1492151637.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:57.974Z,1492151637.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:58.035Z,1492151638.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:58.371Z,1492151638.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:58.403Z,1492151638.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:58.774Z,1492151638.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:58.837Z,1492151638.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:59.163Z,1492151639.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:59.205Z,1492151639.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:59.571Z,1492151639.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:59.594Z,1492151639.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:33:59.973Z,1492151639.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:33:59.994Z,1492151639.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:00.369Z,1492151640.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:00.429Z,1492151640.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:00.770Z,1492151640.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:00.838Z,1492151640.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:01.160Z,1492151641.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:01.186Z,1492151641.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:01.424Z,1492151641.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:01.572Z,1492151641.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:01.610Z,1492151641.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:01.965Z,1492151641.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:01.981Z,1492151641.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:02.220Z,1492151642.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:02.366Z,1492151642.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:02.418Z,1492151642.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:02.632Z,1492151642.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:02.765Z,1492151642.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:02.807Z,1492151642.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:03.171Z,1492151643.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:03.186Z,1492151643.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:03.428Z,1492151643.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:03.569Z,1492151643.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:03.592Z,1492151643.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:03.969Z,1492151643.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:03.990Z,1492151643.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:04.224Z,1492151644.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:04.374Z,1492151644.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:04.390Z,1492151644.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:04.628Z,1492151644.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:04.777Z,1492151644.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:04.792Z,1492151644.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:05.157Z,1492151645.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:05.183Z,1492151645.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:05.554Z,1492151645.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:05.586Z,1492151645.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:05.962Z,1492151645.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:05.993Z,1492151645.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:06.381Z,1492151646.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:06.402Z,1492151646.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:06.758Z,1492151646.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:06.790Z,1492151646.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:07.157Z,1492151647.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:07.173Z,1492151647.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:07.568Z,1492151647.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:07.603Z,1492151647.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:07.966Z,1492151647.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:07.982Z,1492151647.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:08.367Z,1492151648.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:08.383Z,1492151648.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:08.765Z,1492151648.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:08.780Z,1492151648.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:09.168Z,1492151649.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:09.184Z,1492151649.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:09.570Z,1492151649.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:09.586Z,1492151649.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:09.965Z,1492151649.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:09.986Z,1492151649.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:10.360Z,1492151650.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:10.384Z,1492151650.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:10.768Z,1492151650.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:10.784Z,1492151650.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:11.166Z,1492151651.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:11.187Z,1492151651.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:11.569Z,1492151651.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:11.591Z,1492151651.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:11.957Z,1492151651.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:11.990Z,1492151651.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:12.378Z,1492151652.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:12.394Z,1492151652.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:12.757Z,1492151652.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:12.784Z,1492151652.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:13.173Z,1492151653.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:13.189Z,1492151653.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:13.557Z,1492151653.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:13.584Z,1492151653.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:13.974Z,1492151653.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:13.990Z,1492151653.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:14.385Z,1492151654.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:14.401Z,1492151654.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:14.761Z,1492151654.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:14.814Z,1492151654.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:15.157Z,1492151655.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:15.230Z,1492151655.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:18.709Z,1492151658.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:18.749Z,1492151658.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:18.841Z,1492151658.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:18.871Z,1492151658.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:19.214Z,1492151659.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:19.234Z,1492151659.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:19.618Z,1492151659.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:19.634Z,1492151659.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:20.009Z,1492151660.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:20.074Z,1492151660.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:20.418Z,1492151660.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:20.433Z,1492151660.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:20.821Z,1492151660.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:20.877Z,1492151660.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:21.210Z,1492151661.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:21.268Z,1492151661.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:21.609Z,1492151661.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:21.630Z,1492151661.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:22.008Z,1492151662.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:22.035Z,1492151662.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:22.409Z,1492151662.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:22.434Z,1492151662.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:22.801Z,1492151662.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:22.836Z,1492151662.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:23.216Z,1492151663.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:23.233Z,1492151663.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:23.388Z,1492151663.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:23.601Z,1492151663.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:23.628Z,1492151663.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:24.002Z,1492151664.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:24.033Z,1492151664.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:24.184Z,1492151664.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:24.403Z,1492151664.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:24.464Z,1492151664.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:24.588Z,1492151664.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:24.817Z,1492151664.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:24.841Z,1492151664.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:25.201Z,1492151665.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:25.239Z,1492151665.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:25.384Z,1492151665.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:25.605Z,1492151665.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:25.633Z,1492151665.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:26.001Z,1492151666.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:26.033Z,1492151666.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:26.180Z,1492151666.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:26.417Z,1492151666.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:26.441Z,1492151666.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:26.584Z,1492151666.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:26.806Z,1492151666.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:26.838Z,1492151666.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:27.206Z,1492151667.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:27.222Z,1492151667.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:27.380Z,1492151667.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:27.617Z,1492151667.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:27.655Z,1492151667.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:28.009Z,1492151668.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:28.050Z,1492151668.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:28.183Z,1492151668.183 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:28.406Z,1492151668.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:28.422Z,1492151668.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:28.588Z,1492151668.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:28.818Z,1492151668.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:28.852Z,1492151668.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:29.213Z,1492151669.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:29.256Z,1492151669.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:29.384Z,1492151669.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:29.618Z,1492151669.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:29.669Z,1492151669.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:30.009Z,1492151670.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:30.042Z,1492151670.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:30.181Z,1492151670.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:30.419Z,1492151670.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:30.436Z,1492151670.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:30.589Z,1492151670.589 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:30.813Z,1492151670.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:30.836Z,1492151670.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:31.211Z,1492151671.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:31.228Z,1492151671.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:31.384Z,1492151671.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:31.615Z,1492151671.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:31.631Z,1492151671.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:32.002Z,1492151672.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:32.030Z,1492151672.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:32.180Z,1492151672.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:32.402Z,1492151672.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:32.468Z,1492151672.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:32.584Z,1492151672.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:32.821Z,1492151672.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:32.886Z,1492151672.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:33.201Z,1492151673.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:33.258Z,1492151673.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:33.380Z,1492151673.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:33.611Z,1492151673.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:33.650Z,1492151673.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:34.013Z,1492151674.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:34.073Z,1492151674.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:34.178Z,1492151674.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:34.413Z,1492151674.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:34.429Z,1492151674.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:34.584Z,1492151674.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:34.811Z,1492151674.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:34.855Z,1492151674.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:35.213Z,1492151675.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:35.260Z,1492151675.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:35.380Z,1492151675.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:35.601Z,1492151675.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:35.638Z,1492151675.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:36.040Z,1492151676.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:36.103Z,1492151676.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:36.177Z,1492151676.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:36.401Z,1492151676.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:36.438Z,1492151676.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:36.584Z,1492151676.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:36.805Z,1492151676.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:36.822Z,1492151676.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:37.201Z,1492151677.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:37.217Z,1492151677.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:37.381Z,1492151677.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:37.610Z,1492151677.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:37.626Z,1492151677.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:38.008Z,1492151678.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:38.024Z,1492151678.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:38.178Z,1492151678.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:38.414Z,1492151678.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:38.433Z,1492151678.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:38.584Z,1492151678.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:38.809Z,1492151678.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:38.824Z,1492151678.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:39.209Z,1492151679.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:39.225Z,1492151679.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:39.380Z,1492151679.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:39.609Z,1492151679.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:39.630Z,1492151679.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:40.017Z,1492151680.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:40.032Z,1492151680.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:40.178Z,1492151680.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:40.404Z,1492151680.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:40.437Z,1492151680.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:40.584Z,1492151680.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:40.809Z,1492151680.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:40.840Z,1492151680.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:41.198Z,1492151681.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:41.233Z,1492151681.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:41.380Z,1492151681.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:41.601Z,1492151681.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:41.627Z,1492151681.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:42.025Z,1492151682.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:42.050Z,1492151682.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:42.178Z,1492151682.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:42.403Z,1492151682.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:42.440Z,1492151682.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:42.584Z,1492151682.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:42.809Z,1492151682.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:42.849Z,1492151682.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:43.201Z,1492151683.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:43.237Z,1492151683.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:43.380Z,1492151683.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:43.605Z,1492151683.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:43.637Z,1492151683.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:44.013Z,1492151684.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:44.044Z,1492151684.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:44.178Z,1492151684.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:44.404Z,1492151684.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:44.437Z,1492151684.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:44.584Z,1492151684.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:44.812Z,1492151684.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:44.828Z,1492151684.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:45.209Z,1492151685.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:45.225Z,1492151685.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:45.613Z,1492151685.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:45.629Z,1492151685.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:46.009Z,1492151686.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:46.025Z,1492151686.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:46.414Z,1492151686.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:46.429Z,1492151686.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:46.804Z,1492151686.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:46.836Z,1492151686.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:47.213Z,1492151687.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:47.308Z,1492151687.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:47.601Z,1492151687.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:47.634Z,1492151687.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:48.001Z,1492151688.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:48.059Z,1492151688.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:48.413Z,1492151688.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:48.434Z,1492151688.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:48.801Z,1492151688.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:48.869Z,1492151688.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:49.201Z,1492151689.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:49.261Z,1492151689.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:49.613Z,1492151689.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:49.634Z,1492151689.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:50.013Z,1492151690.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:50.029Z,1492151690.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:50.422Z,1492151690.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:50.437Z,1492151690.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:50.815Z,1492151690.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:50.830Z,1492151690.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:51.202Z,1492151691.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:51.237Z,1492151691.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:51.609Z,1492151691.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:51.640Z,1492151691.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:52.007Z,1492151692.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:52.034Z,1492151692.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:52.409Z,1492151692.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:52.429Z,1492151692.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:52.813Z,1492151692.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:52.829Z,1492151692.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:53.209Z,1492151693.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:53.225Z,1492151693.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:53.609Z,1492151693.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:53.627Z,1492151693.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:54.012Z,1492151694.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:54.031Z,1492151694.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:54.409Z,1492151694.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:54.425Z,1492151694.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:54.814Z,1492151694.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:54.830Z,1492151694.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:55.210Z,1492151695.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:55.225Z,1492151695.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:55.609Z,1492151695.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:55.625Z,1492151695.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:56.011Z,1492151696.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:56.032Z,1492151696.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:56.405Z,1492151696.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:56.432Z,1492151696.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:56.805Z,1492151696.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:56.832Z,1492151696.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:57.202Z,1492151697.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:57.246Z,1492151697.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:57.606Z,1492151697.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:57.633Z,1492151697.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:58.001Z,1492151698.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:58.033Z,1492151698.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:58.407Z,1492151698.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:58.423Z,1492151698.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:58.809Z,1492151698.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:58.830Z,1492151698.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:59.209Z,1492151699.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:59.225Z,1492151699.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:34:59.610Z,1492151699.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:34:59.634Z,1492151699.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:00.010Z,1492151700.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:00.025Z,1492151700.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:00.408Z,1492151700.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:00.427Z,1492151700.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:00.814Z,1492151700.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:00.835Z,1492151700.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:01.213Z,1492151701.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:01.246Z,1492151701.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:01.610Z,1492151701.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:01.650Z,1492151701.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:02.017Z,1492151702.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:02.059Z,1492151702.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:02.406Z,1492151702.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:02.465Z,1492151702.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:02.808Z,1492151702.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:02.824Z,1492151702.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:03.210Z,1492151703.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:03.266Z,1492151703.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:03.653Z,1492151703.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:03.784Z,1492151703.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:04.001Z,1492151704.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:04.072Z,1492151704.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:04.403Z,1492151704.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:04.438Z,1492151704.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:04.803Z,1492151704.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:04.858Z,1492151704.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:05.202Z,1492151705.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:05.250Z,1492151705.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:05.622Z,1492151705.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:05.662Z,1492151705.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:06.009Z,1492151706.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:06.067Z,1492151706.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:06.401Z,1492151706.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:06.416Z,1492151706.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:06.801Z,1492151706.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:06.835Z,1492151706.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:07.205Z,1492151707.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:07.230Z,1492151707.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:07.604Z,1492151707.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:07.631Z,1492151707.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:08.001Z,1492151708.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:08.028Z,1492151708.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:08.401Z,1492151708.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:08.428Z,1492151708.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:08.801Z,1492151708.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:08.827Z,1492151708.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:09.205Z,1492151709.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:09.232Z,1492151709.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:09.320Z,1492151709.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:09.601Z,1492151709.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:09.630Z,1492151709.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:10.001Z,1492151710.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:10.037Z,1492151710.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:10.116Z,1492151710.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:10.419Z,1492151710.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:10.441Z,1492151710.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:10.520Z,1492151710.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:10.813Z,1492151710.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:10.846Z,1492151710.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:11.210Z,1492151711.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:11.240Z,1492151711.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:11.607Z,1492151711.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:11.634Z,1492151711.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:12.009Z,1492151712.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:12.025Z,1492151712.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:12.401Z,1492151712.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:12.440Z,1492151712.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:12.814Z,1492151712.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:12.830Z,1492151712.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:13.201Z,1492151713.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:13.237Z,1492151713.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:13.613Z,1492151713.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:13.629Z,1492151713.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:14.001Z,1492151714.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:14.031Z,1492151714.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:14.401Z,1492151714.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:14.436Z,1492151714.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:14.801Z,1492151714.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:14.820Z,1492151714.819 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:35:14.820Z,1492151714.820 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:35:14.820Z,1492151714.820 [BPC1](ERROR): Data Fault
2017-04-14T06:35:14.850Z,1492151714.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:14.884Z,1492151714.884 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:35:15.201Z,1492151715.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:15.239Z,1492151715.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:18.735Z,1492151718.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:18.751Z,1492151718.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:18.850Z,1492151718.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:18.886Z,1492151718.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:18.906Z,1492151718.906 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:35:18.906Z,1492151718.906 [BPC1] No Fault, FailCount= 1
2017-04-14T06:35:19.246Z,1492151719.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:19.326Z,1492151719.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:19.649Z,1492151719.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:19.789Z,1492151719.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:20.042Z,1492151720.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:20.058Z,1492151720.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:20.445Z,1492151720.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:20.466Z,1492151720.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:20.850Z,1492151720.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:20.865Z,1492151720.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:21.250Z,1492151721.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:21.266Z,1492151721.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:21.649Z,1492151721.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:21.670Z,1492151721.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:22.047Z,1492151722.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:22.082Z,1492151722.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:22.449Z,1492151722.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:22.466Z,1492151722.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:22.849Z,1492151722.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:22.865Z,1492151722.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:23.250Z,1492151723.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:23.265Z,1492151723.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:23.653Z,1492151723.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:23.669Z,1492151723.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:24.097Z,1492151724.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:24.133Z,1492151724.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:24.157Z,1492151724.157 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:24.157Z,1492151724.157 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:35:24.157Z,1492151724.157 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:35:24.191Z,1492151724.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:35:24.449Z,1492151724.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:24.464Z,1492151724.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:24.506Z,1492151724.506 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:35:24.506Z,1492151724.506 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:35:24.849Z,1492151724.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:24.880Z,1492151724.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:24.899Z,1492151724.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:35:24.903Z,1492151724.903 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:35:24.904Z,1492151724.904 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:35:25.249Z,1492151725.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:25.270Z,1492151725.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:25.649Z,1492151725.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:25.664Z,1492151725.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:26.117Z,1492151726.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:26.145Z,1492151726.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:26.449Z,1492151726.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:26.490Z,1492151726.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:26.850Z,1492151726.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:26.888Z,1492151726.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:27.246Z,1492151727.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:27.262Z,1492151727.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:27.647Z,1492151727.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:27.663Z,1492151727.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:28.043Z,1492151728.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:28.082Z,1492151728.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:28.459Z,1492151728.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:28.475Z,1492151728.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:28.852Z,1492151728.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:28.880Z,1492151728.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:29.255Z,1492151729.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:29.271Z,1492151729.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:29.655Z,1492151729.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:29.671Z,1492151729.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:30.041Z,1492151730.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:30.075Z,1492151730.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:30.446Z,1492151730.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:30.463Z,1492151730.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:30.846Z,1492151730.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:30.884Z,1492151730.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:31.249Z,1492151731.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:31.266Z,1492151731.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:31.650Z,1492151731.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:31.738Z,1492151731.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:32.041Z,1492151732.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:32.094Z,1492151732.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:32.444Z,1492151732.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:32.470Z,1492151732.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:32.849Z,1492151732.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:32.865Z,1492151732.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:33.249Z,1492151733.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:33.309Z,1492151733.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:33.658Z,1492151733.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:33.743Z,1492151733.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:34.038Z,1492151734.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:34.086Z,1492151734.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:34.441Z,1492151734.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:34.473Z,1492151734.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:34.849Z,1492151734.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:34.891Z,1492151734.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:35.248Z,1492151735.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:35.275Z,1492151735.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:35.649Z,1492151735.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:35.679Z,1492151735.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:36.051Z,1492151736.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:36.067Z,1492151736.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:36.448Z,1492151736.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:36.463Z,1492151736.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:36.848Z,1492151736.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:36.872Z,1492151736.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:37.269Z,1492151737.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:37.284Z,1492151737.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:37.653Z,1492151737.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:37.669Z,1492151737.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:38.092Z,1492151738.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:38.129Z,1492151738.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:38.461Z,1492151738.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:38.482Z,1492151738.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:38.853Z,1492151738.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:38.870Z,1492151738.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:39.238Z,1492151739.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:39.278Z,1492151739.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:39.645Z,1492151739.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:39.674Z,1492151739.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:40.114Z,1492151740.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:40.184Z,1492151740.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:40.449Z,1492151740.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:40.465Z,1492151740.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:40.848Z,1492151740.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:40.876Z,1492151740.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:41.238Z,1492151741.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:41.288Z,1492151741.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:41.642Z,1492151741.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:41.722Z,1492151741.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:42.052Z,1492151742.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:42.083Z,1492151742.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:42.450Z,1492151742.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:42.466Z,1492151742.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:42.848Z,1492151742.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:42.876Z,1492151742.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:43.290Z,1492151743.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:43.330Z,1492151743.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:43.641Z,1492151743.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:43.734Z,1492151743.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:44.053Z,1492151744.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:44.069Z,1492151744.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:44.441Z,1492151744.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:44.468Z,1492151744.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:44.841Z,1492151744.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:44.874Z,1492151744.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:45.264Z,1492151745.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:45.289Z,1492151745.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:45.645Z,1492151745.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:45.745Z,1492151745.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:46.050Z,1492151746.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:46.066Z,1492151746.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:46.452Z,1492151746.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:46.468Z,1492151746.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:46.856Z,1492151746.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:46.930Z,1492151746.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:47.241Z,1492151747.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:47.274Z,1492151747.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:47.641Z,1492151747.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:47.777Z,1492151747.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:48.050Z,1492151748.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:48.070Z,1492151748.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:48.449Z,1492151748.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:48.495Z,1492151748.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:48.846Z,1492151748.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:48.902Z,1492151748.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:49.250Z,1492151749.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:49.270Z,1492151749.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:49.650Z,1492151749.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:49.665Z,1492151749.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:50.041Z,1492151750.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:50.078Z,1492151750.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:50.466Z,1492151750.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:50.486Z,1492151750.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:50.857Z,1492151750.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:50.873Z,1492151750.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:51.242Z,1492151751.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:51.270Z,1492151751.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:51.645Z,1492151751.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:51.682Z,1492151751.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:52.076Z,1492151752.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:52.118Z,1492151752.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:52.441Z,1492151752.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:52.472Z,1492151752.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:52.849Z,1492151752.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:52.870Z,1492151752.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:53.254Z,1492151753.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:53.269Z,1492151753.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:53.653Z,1492151753.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:53.734Z,1492151753.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:54.076Z,1492151754.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:54.146Z,1492151754.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:54.486Z,1492151754.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:54.502Z,1492151754.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:54.843Z,1492151754.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:54.859Z,1492151754.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:55.249Z,1492151755.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:55.265Z,1492151755.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:55.690Z,1492151755.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:55.752Z,1492151755.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:56.050Z,1492151756.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:56.082Z,1492151756.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:56.449Z,1492151756.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:56.465Z,1492151756.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:56.849Z,1492151756.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:56.865Z,1492151756.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:57.242Z,1492151757.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:57.258Z,1492151757.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:57.697Z,1492151757.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:57.734Z,1492151757.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:58.050Z,1492151758.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:58.065Z,1492151758.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:58.449Z,1492151758.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:58.465Z,1492151758.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:58.845Z,1492151758.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:58.867Z,1492151758.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:59.246Z,1492151759.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:59.266Z,1492151759.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:35:59.663Z,1492151759.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:35:59.732Z,1492151759.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:00.041Z,1492151760.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:00.056Z,1492151760.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:00.453Z,1492151760.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:00.494Z,1492151760.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:00.853Z,1492151760.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:00.902Z,1492151760.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:01.250Z,1492151761.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:01.306Z,1492151761.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:01.672Z,1492151761.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:01.758Z,1492151761.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:02.045Z,1492151762.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:02.072Z,1492151762.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:02.441Z,1492151762.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:02.490Z,1492151762.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:02.845Z,1492151762.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:02.871Z,1492151762.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:03.238Z,1492151763.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:03.287Z,1492151763.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:03.641Z,1492151763.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:03.748Z,1492151763.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:04.041Z,1492151764.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:04.084Z,1492151764.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:04.445Z,1492151764.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:04.477Z,1492151764.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:04.849Z,1492151764.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:04.884Z,1492151764.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:05.246Z,1492151765.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:05.262Z,1492151765.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:05.647Z,1492151765.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:05.689Z,1492151765.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:06.059Z,1492151766.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:06.087Z,1492151766.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:06.446Z,1492151766.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:06.478Z,1492151766.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:06.847Z,1492151766.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:06.863Z,1492151766.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:07.248Z,1492151767.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:07.301Z,1492151767.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:07.647Z,1492151767.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:07.694Z,1492151767.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:08.068Z,1492151768.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:08.111Z,1492151768.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:08.453Z,1492151768.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:08.469Z,1492151768.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:08.849Z,1492151768.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:08.865Z,1492151768.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:09.263Z,1492151769.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:09.281Z,1492151769.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:09.703Z,1492151769.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:09.754Z,1492151769.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:10.048Z,1492151770.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:10.064Z,1492151770.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:10.445Z,1492151770.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:10.466Z,1492151770.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:10.849Z,1492151770.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:10.870Z,1492151770.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:11.241Z,1492151771.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:11.279Z,1492151771.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:11.718Z,1492151771.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:11.750Z,1492151771.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:12.045Z,1492151772.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:12.077Z,1492151772.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:12.453Z,1492151772.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:12.483Z,1492151772.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:12.846Z,1492151772.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:12.884Z,1492151772.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:13.255Z,1492151773.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:13.286Z,1492151773.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:13.697Z,1492151773.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:13.739Z,1492151773.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:14.054Z,1492151774.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:14.073Z,1492151774.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:14.451Z,1492151774.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:14.466Z,1492151774.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:14.854Z,1492151774.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:14.871Z,1492151774.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:14.879Z,1492151774.879 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:36:14.879Z,1492151774.879 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:36:14.879Z,1492151774.879 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:36:14.879Z,1492151774.879 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:36:15.241Z,1492151775.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:15.302Z,1492151775.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:15.323Z,1492151775.323 [Default:CheckIn:D] Stopped
2017-04-14T06:36:15.323Z,1492151775.323 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:36:18.767Z,1492151778.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:18.819Z,1492151778.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:18.839Z,1492151778.839 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 190.166683 min 
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn:E] Stopped
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn] Stopped
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn](INFO): Running loop #27
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn] Running Loop=27
2017-04-14T06:36:18.840Z,1492151778.840 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:36:18.840Z,1492151778.841 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:36:18.926Z,1492151778.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:18.969Z,1492151778.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:19.296Z,1492151779.296 [NAL9602](INFO): Powering up
2017-04-14T06:36:19.315Z,1492151779.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:19.358Z,1492151779.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:19.728Z,1492151779.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:19.766Z,1492151779.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:20.117Z,1492151780.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:20.169Z,1492151780.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:20.513Z,1492151780.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:20.570Z,1492151780.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:20.921Z,1492151780.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:20.928Z,1492151780.928 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T06:36:20.978Z,1492151780.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:21.322Z,1492151781.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:21.354Z,1492151781.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:21.725Z,1492151781.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:21.755Z,1492151781.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:22.133Z,1492151782.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:22.148Z,1492151782.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x30352 got:0x20743
2017-04-14T06:36:22.174Z,1492151782.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:22.531Z,1492151782.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:22.570Z,1492151782.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:22.927Z,1492151782.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:22.942Z,1492151782.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:23.329Z,1492151783.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:23.349Z,1492151783.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:23.726Z,1492151783.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:23.742Z,1492151783.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:24.129Z,1492151784.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:24.158Z,1492151784.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:24.531Z,1492151784.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:24.547Z,1492151784.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:24.920Z,1492151784.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:24.944Z,1492151784.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:25.330Z,1492151785.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:25.389Z,1492151785.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:25.730Z,1492151785.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:25.788Z,1492151785.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:26.116Z,1492151786.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:26.143Z,1492151786.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:26.513Z,1492151786.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:26.559Z,1492151786.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:26.933Z,1492151786.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:26.965Z,1492151786.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:27.327Z,1492151787.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:27.343Z,1492151787.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:27.726Z,1492151787.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:27.741Z,1492151787.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:28.115Z,1492151788.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:28.149Z,1492151788.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:28.531Z,1492151788.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:28.548Z,1492151788.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:28.945Z,1492151788.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:28.966Z,1492151788.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:29.327Z,1492151789.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:29.350Z,1492151789.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:29.738Z,1492151789.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:29.754Z,1492151789.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:30.101Z,1492151790.102 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:36:30.124Z,1492151790.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:30.164Z,1492151790.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:30.518Z,1492151790.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:30.559Z,1492151790.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:30.944Z,1492151790.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:30.960Z,1492151790.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:31.346Z,1492151791.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:31.362Z,1492151791.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:31.744Z,1492151791.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:31.773Z,1492151791.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:32.117Z,1492151792.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:32.134Z,1492151792.134 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:36:32.134Z,1492151792.134 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:36:32.134Z,1492151792.134 [BPC1](ERROR): Data Fault
2017-04-14T06:36:32.156Z,1492151792.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:32.196Z,1492151792.196 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:36:32.525Z,1492151792.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:32.553Z,1492151792.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:32.924Z,1492151792.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:32.954Z,1492151792.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:33.328Z,1492151793.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:33.356Z,1492151793.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:33.375Z,1492151793.375 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:36:33.375Z,1492151793.375 [BPC1] No Fault, FailCount= 1
2017-04-14T06:36:33.741Z,1492151793.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:33.818Z,1492151793.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:34.129Z,1492151794.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:34.156Z,1492151794.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:34.517Z,1492151794.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:34.566Z,1492151794.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:34.922Z,1492151794.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:34.954Z,1492151794.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:35.321Z,1492151795.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:35.354Z,1492151795.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:35.714Z,1492151795.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:35.729Z,1492151795.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:36.121Z,1492151796.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:36.146Z,1492151796.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:36.531Z,1492151796.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:36.547Z,1492151796.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:36.927Z,1492151796.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:36.943Z,1492151796.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:37.331Z,1492151797.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:37.347Z,1492151797.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:37.728Z,1492151797.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:37.748Z,1492151797.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:38.123Z,1492151798.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:38.162Z,1492151798.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:38.532Z,1492151798.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:38.548Z,1492151798.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:38.913Z,1492151798.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:38.951Z,1492151798.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:39.338Z,1492151799.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:39.354Z,1492151799.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:39.740Z,1492151799.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:39.756Z,1492151799.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:40.122Z,1492151800.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:40.150Z,1492151800.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:40.514Z,1492151800.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:40.552Z,1492151800.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:40.918Z,1492151800.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:40.951Z,1492151800.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:41.317Z,1492151801.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:41.350Z,1492151801.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:41.728Z,1492151801.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:41.759Z,1492151801.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:42.140Z,1492151802.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:42.157Z,1492151802.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:42.519Z,1492151802.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:42.550Z,1492151802.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:42.921Z,1492151802.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:42.953Z,1492151802.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:43.322Z,1492151803.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:43.366Z,1492151803.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:43.723Z,1492151803.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:43.763Z,1492151803.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:44.122Z,1492151804.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:44.142Z,1492151804.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:44.526Z,1492151804.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:44.542Z,1492151804.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:44.925Z,1492151804.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:44.941Z,1492151804.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:45.320Z,1492151805.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:45.352Z,1492151805.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:45.717Z,1492151805.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:45.733Z,1492151805.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:46.118Z,1492151806.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:46.142Z,1492151806.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:46.513Z,1492151806.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:46.555Z,1492151806.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:46.913Z,1492151806.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:46.960Z,1492151806.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:47.326Z,1492151807.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:47.354Z,1492151807.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:47.725Z,1492151807.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:47.782Z,1492151807.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:48.119Z,1492151808.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:48.136Z,1492151808.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:48.522Z,1492151808.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:48.567Z,1492151808.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:48.923Z,1492151808.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:48.977Z,1492151808.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:49.323Z,1492151809.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:49.339Z,1492151809.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:49.721Z,1492151809.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:49.742Z,1492151809.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:50.125Z,1492151810.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:50.141Z,1492151810.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:50.536Z,1492151810.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:50.552Z,1492151810.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:50.952Z,1492151810.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:50.980Z,1492151810.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:51.327Z,1492151811.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:51.343Z,1492151811.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:51.724Z,1492151811.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:51.740Z,1492151811.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:52.127Z,1492151812.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:52.143Z,1492151812.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:52.523Z,1492151812.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:52.539Z,1492151812.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:52.917Z,1492151812.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:52.942Z,1492151812.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:53.321Z,1492151813.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:53.346Z,1492151813.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:53.722Z,1492151813.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:53.739Z,1492151813.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:54.113Z,1492151814.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:54.142Z,1492151814.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:54.513Z,1492151814.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:54.547Z,1492151814.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:54.939Z,1492151814.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:54.955Z,1492151814.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:55.324Z,1492151815.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:55.362Z,1492151815.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:55.720Z,1492151815.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:55.748Z,1492151815.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:56.121Z,1492151816.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:56.162Z,1492151816.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:56.515Z,1492151816.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:56.530Z,1492151816.530 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:56.531Z,1492151816.531 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:36:56.531Z,1492151816.531 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:36:56.537Z,1492151816.537 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:56.538Z,1492151816.538 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:36:56.538Z,1492151816.538 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:36:56.581Z,1492151816.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:36:56.581Z,1492151816.581 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:36:56.919Z,1492151816.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:56.975Z,1492151816.975 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:36:56.975Z,1492151816.975 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:36:56.976Z,1492151816.976 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:36:56.976Z,1492151816.976 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:36:57.327Z,1492151817.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:57.342Z,1492151817.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:36:57.342Z,1492151817.342 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:36:57.343Z,1492151817.343 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:36:57.347Z,1492151817.348 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:36:57.348Z,1492151817.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:36:57.348Z,1492151817.348 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:36:57.713Z,1492151817.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:57.741Z,1492151817.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:58.113Z,1492151818.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:58.150Z,1492151818.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:58.531Z,1492151818.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:58.547Z,1492151818.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:58.913Z,1492151818.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:58.940Z,1492151818.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:59.313Z,1492151819.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:59.349Z,1492151819.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:36:59.735Z,1492151819.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:36:59.751Z,1492151819.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:00.121Z,1492151820.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:00.149Z,1492151820.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:00.514Z,1492151820.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:00.550Z,1492151820.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:00.922Z,1492151820.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:00.994Z,1492151820.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:01.314Z,1492151821.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:01.377Z,1492151821.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:01.717Z,1492151821.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:01.755Z,1492151821.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:02.117Z,1492151822.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:02.178Z,1492151822.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:02.521Z,1492151822.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:02.562Z,1492151822.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:02.914Z,1492151822.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:02.962Z,1492151822.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:03.337Z,1492151823.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:03.419Z,1492151823.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:03.735Z,1492151823.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:03.765Z,1492151823.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:04.124Z,1492151824.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:04.173Z,1492151824.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:04.530Z,1492151824.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:04.575Z,1492151824.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:04.924Z,1492151824.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:04.973Z,1492151824.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:05.315Z,1492151825.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:05.393Z,1492151825.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:05.718Z,1492151825.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:05.753Z,1492151825.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:06.136Z,1492151826.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:06.166Z,1492151826.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:06.528Z,1492151826.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:06.561Z,1492151826.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:06.923Z,1492151826.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:06.938Z,1492151826.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:07.321Z,1492151827.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:07.337Z,1492151827.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:07.727Z,1492151827.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:07.746Z,1492151827.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:08.128Z,1492151828.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:08.144Z,1492151828.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:08.528Z,1492151828.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:08.544Z,1492151828.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:08.921Z,1492151828.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:08.936Z,1492151828.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:09.321Z,1492151829.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:09.341Z,1492151829.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:09.723Z,1492151829.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:09.793Z,1492151829.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:10.142Z,1492151830.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:10.219Z,1492151830.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:10.516Z,1492151830.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:10.545Z,1492151830.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:10.918Z,1492151830.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:10.966Z,1492151830.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:11.317Z,1492151831.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:11.343Z,1492151831.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:11.767Z,1492151831.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:11.848Z,1492151831.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:12.143Z,1492151832.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:12.213Z,1492151832.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:12.545Z,1492151832.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:12.578Z,1492151832.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:13.010Z,1492151833.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:13.095Z,1492151833.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:13.371Z,1492151833.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:13.395Z,1492151833.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:13.744Z,1492151833.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:13.834Z,1492151833.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:14.133Z,1492151834.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:14.190Z,1492151834.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:14.607Z,1492151834.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:14.676Z,1492151834.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:14.942Z,1492151834.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:15.005Z,1492151835.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:15.325Z,1492151835.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:15.454Z,1492151835.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:17.120Z,1492151837.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:17.916Z,1492151837.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:18.328Z,1492151838.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:19.135Z,1492151839.135 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:19.465Z,1492151839.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:19.486Z,1492151839.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:19.688Z,1492151839.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:19.742Z,1492151839.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:19.932Z,1492151839.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:20.086Z,1492151840.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:20.118Z,1492151840.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:20.336Z,1492151840.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:20.496Z,1492151840.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:20.546Z,1492151840.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:20.896Z,1492151840.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:20.942Z,1492151840.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:21.283Z,1492151841.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:21.299Z,1492151841.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:21.683Z,1492151841.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:21.702Z,1492151841.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:22.088Z,1492151842.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:22.104Z,1492151842.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:22.482Z,1492151842.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:22.502Z,1492151842.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:22.889Z,1492151842.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:22.907Z,1492151842.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:23.285Z,1492151843.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:23.302Z,1492151843.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:23.698Z,1492151843.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:23.718Z,1492151843.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:24.089Z,1492151844.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:24.112Z,1492151844.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:24.473Z,1492151844.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:24.500Z,1492151844.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:24.891Z,1492151844.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:24.906Z,1492151844.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:25.277Z,1492151845.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:25.304Z,1492151845.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:25.675Z,1492151845.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:25.717Z,1492151845.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:26.085Z,1492151846.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:26.113Z,1492151846.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:26.473Z,1492151846.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:26.514Z,1492151846.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:26.883Z,1492151846.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:26.919Z,1492151846.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:27.276Z,1492151847.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:27.292Z,1492151847.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:27.688Z,1492151847.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:27.736Z,1492151847.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:28.083Z,1492151848.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:28.124Z,1492151848.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:28.483Z,1492151848.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:28.499Z,1492151848.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:28.877Z,1492151848.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:28.901Z,1492151848.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:29.290Z,1492151849.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:29.306Z,1492151849.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:29.691Z,1492151849.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:29.714Z,1492151849.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:30.074Z,1492151850.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:30.106Z,1492151850.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:30.473Z,1492151850.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:30.506Z,1492151850.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:30.891Z,1492151850.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:30.952Z,1492151850.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:31.275Z,1492151851.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:31.306Z,1492151851.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:31.675Z,1492151851.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:31.691Z,1492151851.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:32.117Z,1492151852.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:32.147Z,1492151852.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:32.484Z,1492151852.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:32.523Z,1492151852.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:32.877Z,1492151852.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:32.974Z,1492151852.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:33.280Z,1492151853.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:33.326Z,1492151853.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:33.712Z,1492151853.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:33.728Z,1492151853.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:34.095Z,1492151854.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:34.164Z,1492151854.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:34.485Z,1492151854.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:34.500Z,1492151854.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:34.881Z,1492151854.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:34.946Z,1492151854.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:35.282Z,1492151855.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:35.342Z,1492151855.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:35.682Z,1492151855.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:35.697Z,1492151855.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:36.082Z,1492151856.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:36.124Z,1492151856.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:36.489Z,1492151856.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:36.524Z,1492151856.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:36.879Z,1492151856.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:36.902Z,1492151856.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:37.279Z,1492151857.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:37.295Z,1492151857.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:37.714Z,1492151857.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:37.730Z,1492151857.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:38.082Z,1492151858.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:38.097Z,1492151858.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:38.484Z,1492151858.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:38.500Z,1492151858.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:38.883Z,1492151858.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:38.899Z,1492151858.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:39.283Z,1492151859.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:39.298Z,1492151859.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:39.686Z,1492151859.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:39.702Z,1492151859.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:40.089Z,1492151860.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:40.105Z,1492151860.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:40.482Z,1492151860.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:40.502Z,1492151860.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:40.886Z,1492151860.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:40.902Z,1492151860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:41.282Z,1492151861.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:41.298Z,1492151861.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:41.676Z,1492151861.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:41.709Z,1492151861.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:42.095Z,1492151862.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:42.111Z,1492151862.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:42.495Z,1492151862.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:42.511Z,1492151862.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:42.897Z,1492151862.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:42.913Z,1492151862.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:43.277Z,1492151863.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:43.305Z,1492151863.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:43.690Z,1492151863.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:43.707Z,1492151863.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:44.075Z,1492151864.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:44.115Z,1492151864.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:44.496Z,1492151864.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:44.530Z,1492151864.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:44.877Z,1492151864.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:44.893Z,1492151864.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:45.296Z,1492151865.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:45.323Z,1492151865.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:45.684Z,1492151865.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:45.708Z,1492151865.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:46.077Z,1492151866.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:46.122Z,1492151866.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:46.490Z,1492151866.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:46.527Z,1492151866.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:46.888Z,1492151866.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:46.918Z,1492151866.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:47.289Z,1492151867.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:47.342Z,1492151867.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:47.681Z,1492151867.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:47.730Z,1492151867.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:48.085Z,1492151868.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:48.101Z,1492151868.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:48.481Z,1492151868.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:48.536Z,1492151868.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:48.880Z,1492151868.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:48.910Z,1492151868.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:49.276Z,1492151869.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:49.322Z,1492151869.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:49.683Z,1492151869.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:49.738Z,1492151869.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:50.082Z,1492151870.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:50.123Z,1492151870.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:50.481Z,1492151870.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:50.524Z,1492151870.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:50.892Z,1492151870.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:50.920Z,1492151870.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:51.296Z,1492151871.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:51.321Z,1492151871.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:51.707Z,1492151871.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:51.726Z,1492151871.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:52.096Z,1492151872.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:52.126Z,1492151872.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:52.487Z,1492151872.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:52.523Z,1492151872.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:52.883Z,1492151872.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:52.919Z,1492151872.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:53.285Z,1492151873.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:53.301Z,1492151873.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:53.683Z,1492151873.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:53.699Z,1492151873.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:54.083Z,1492151874.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:54.098Z,1492151874.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:54.485Z,1492151874.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:54.501Z,1492151874.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:54.883Z,1492151874.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:54.900Z,1492151874.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:55.273Z,1492151875.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:55.319Z,1492151875.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:55.695Z,1492151875.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:55.719Z,1492151875.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:56.102Z,1492151876.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:56.154Z,1492151876.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:56.497Z,1492151876.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:56.514Z,1492151876.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:56.897Z,1492151876.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:56.913Z,1492151876.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:57.274Z,1492151877.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:57.312Z,1492151877.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:57.678Z,1492151877.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:57.715Z,1492151877.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:58.079Z,1492151878.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:58.117Z,1492151878.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:58.505Z,1492151878.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:58.521Z,1492151878.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:58.882Z,1492151878.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:58.902Z,1492151878.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:59.283Z,1492151879.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:59.300Z,1492151879.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:37:59.686Z,1492151879.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:37:59.710Z,1492151879.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:00.143Z,1492151880.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:00.230Z,1492151880.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:00.508Z,1492151880.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:00.558Z,1492151880.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:00.888Z,1492151880.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:00.953Z,1492151880.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:01.288Z,1492151881.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:01.319Z,1492151881.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:01.718Z,1492151881.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:01.801Z,1492151881.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:02.087Z,1492151882.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:02.139Z,1492151882.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:02.494Z,1492151882.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:02.526Z,1492151882.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:02.883Z,1492151882.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:03.002Z,1492151883.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:03.275Z,1492151883.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:03.315Z,1492151883.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:03.675Z,1492151883.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:03.747Z,1492151883.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:04.088Z,1492151884.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:04.150Z,1492151884.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:04.505Z,1492151884.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:04.522Z,1492151884.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:04.921Z,1492151884.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:04.961Z,1492151884.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:05.273Z,1492151885.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:05.312Z,1492151885.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:05.701Z,1492151885.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:05.716Z,1492151885.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:06.088Z,1492151886.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:06.124Z,1492151886.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:06.501Z,1492151886.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:06.517Z,1492151886.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:06.906Z,1492151886.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:06.922Z,1492151886.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:07.311Z,1492151887.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:07.335Z,1492151887.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:07.677Z,1492151887.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:07.701Z,1492151887.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:08.086Z,1492151888.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:08.115Z,1492151888.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:08.476Z,1492151888.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:08.515Z,1492151888.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:08.877Z,1492151888.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:08.914Z,1492151888.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:09.273Z,1492151889.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:09.290Z,1492151889.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:09.678Z,1492151889.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:09.694Z,1492151889.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:10.085Z,1492151890.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:10.120Z,1492151890.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:10.478Z,1492151890.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:10.498Z,1492151890.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:10.893Z,1492151890.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:10.930Z,1492151890.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:11.296Z,1492151891.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:11.322Z,1492151891.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:11.688Z,1492151891.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:11.726Z,1492151891.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:12.094Z,1492151892.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:12.114Z,1492151892.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:12.477Z,1492151892.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:12.504Z,1492151892.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:12.873Z,1492151892.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:12.907Z,1492151892.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:13.281Z,1492151893.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:13.308Z,1492151893.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:13.694Z,1492151893.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:13.710Z,1492151893.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:14.128Z,1492151894.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:14.169Z,1492151894.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:14.477Z,1492151894.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:14.521Z,1492151894.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:14.883Z,1492151894.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:14.908Z,1492151894.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:15.275Z,1492151895.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:15.350Z,1492151895.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:15.689Z,1492151895.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:15.725Z,1492151895.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:19.283Z,1492151899.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:19.327Z,1492151899.327 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:38:19.327Z,1492151899.327 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:38:19.327Z,1492151899.327 [BPC1](ERROR): Communications Fault
2017-04-14T06:38:19.338Z,1492151899.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:19.389Z,1492151899.389 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:38:19.532Z,1492151899.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:19.569Z,1492151899.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:19.852Z,1492151899.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:19.902Z,1492151899.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:20.267Z,1492151900.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:20.328Z,1492151900.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:20.389Z,1492151900.389 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:38:20.390Z,1492151900.390 [BPC1] No Fault, FailCount= 1
2017-04-14T06:38:20.646Z,1492151900.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:20.738Z,1492151900.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:21.036Z,1492151901.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:21.104Z,1492151901.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:21.500Z,1492151901.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:21.572Z,1492151901.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:21.837Z,1492151901.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:21.877Z,1492151901.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:22.243Z,1492151902.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:22.287Z,1492151902.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:22.636Z,1492151902.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:22.652Z,1492151902.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:23.028Z,1492151903.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:23.068Z,1492151903.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:23.426Z,1492151903.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:23.522Z,1492151903.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:23.830Z,1492151903.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:23.873Z,1492151903.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:24.240Z,1492151904.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:24.276Z,1492151904.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:24.640Z,1492151904.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:24.674Z,1492151904.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:25.030Z,1492151905.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:25.106Z,1492151905.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:25.121Z,1492151905.121 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:25.121Z,1492151905.121 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T06:38:25.121Z,1492151905.121 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:38:25.160Z,1492151905.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:38:25.442Z,1492151905.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:25.473Z,1492151905.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:25.496Z,1492151905.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:38:25.496Z,1492151905.496 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T06:38:25.857Z,1492151905.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:25.889Z,1492151905.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:25.904Z,1492151905.904 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:38:25.904Z,1492151905.904 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:38:25.904Z,1492151905.904 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:38:26.235Z,1492151906.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:26.251Z,1492151906.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:26.644Z,1492151906.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:26.660Z,1492151906.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:27.026Z,1492151907.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:27.060Z,1492151907.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:27.423Z,1492151907.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:27.464Z,1492151907.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:27.840Z,1492151907.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:27.880Z,1492151907.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:28.230Z,1492151908.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:28.262Z,1492151908.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:28.637Z,1492151908.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:28.672Z,1492151908.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:29.035Z,1492151909.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:29.051Z,1492151909.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:29.491Z,1492151909.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:29.521Z,1492151909.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:29.850Z,1492151909.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:29.872Z,1492151909.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:30.233Z,1492151910.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:30.269Z,1492151910.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:30.631Z,1492151910.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:30.673Z,1492151910.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:31.034Z,1492151911.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:31.050Z,1492151911.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:31.490Z,1492151911.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:31.541Z,1492151911.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:31.842Z,1492151911.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:31.909Z,1492151911.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:32.246Z,1492151912.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:32.264Z,1492151912.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:32.649Z,1492151912.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:32.706Z,1492151912.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:33.038Z,1492151913.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:33.083Z,1492151913.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:33.477Z,1492151913.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:33.550Z,1492151913.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:33.836Z,1492151913.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:33.868Z,1492151913.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:34.234Z,1492151914.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:34.290Z,1492151914.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:34.671Z,1492151914.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:34.687Z,1492151914.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:35.037Z,1492151915.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:35.075Z,1492151915.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:35.474Z,1492151915.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:35.502Z,1492151915.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:35.827Z,1492151915.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:35.844Z,1492151915.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:36.225Z,1492151916.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:36.265Z,1492151916.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:36.625Z,1492151916.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:36.669Z,1492151916.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:37.030Z,1492151917.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:37.058Z,1492151917.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:37.467Z,1492151917.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:37.540Z,1492151917.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:37.848Z,1492151917.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:37.871Z,1492151917.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:38.235Z,1492151918.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:38.280Z,1492151918.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:38.636Z,1492151918.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:38.661Z,1492151918.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:39.039Z,1492151919.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:39.109Z,1492151919.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:39.440Z,1492151919.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:39.456Z,1492151919.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:39.840Z,1492151919.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:39.868Z,1492151919.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:40.229Z,1492151920.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:40.257Z,1492151920.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:40.625Z,1492151920.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:40.658Z,1492151920.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:41.025Z,1492151921.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:41.064Z,1492151921.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:41.436Z,1492151921.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:41.464Z,1492151921.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:41.857Z,1492151921.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:41.924Z,1492151921.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:42.229Z,1492151922.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:42.270Z,1492151922.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:42.633Z,1492151922.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:42.648Z,1492151922.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:43.033Z,1492151923.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:43.049Z,1492151923.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:43.486Z,1492151923.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:43.548Z,1492151923.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:43.832Z,1492151923.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:43.859Z,1492151923.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:44.235Z,1492151924.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:44.251Z,1492151924.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:44.646Z,1492151924.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:44.710Z,1492151924.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:45.029Z,1492151925.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:45.055Z,1492151925.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:45.472Z,1492151925.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:45.545Z,1492151925.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:45.857Z,1492151925.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:45.878Z,1492151925.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:46.236Z,1492151926.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:46.307Z,1492151926.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:46.629Z,1492151926.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:46.685Z,1492151926.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:47.029Z,1492151927.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:47.066Z,1492151927.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:47.468Z,1492151927.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:47.501Z,1492151927.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:47.830Z,1492151927.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:47.847Z,1492151927.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:48.231Z,1492151928.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:48.252Z,1492151928.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:48.635Z,1492151928.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:48.651Z,1492151928.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:49.035Z,1492151929.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:49.051Z,1492151929.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:49.459Z,1492151929.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:49.502Z,1492151929.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:49.839Z,1492151929.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:49.858Z,1492151929.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:50.241Z,1492151930.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:50.257Z,1492151930.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:50.625Z,1492151930.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:50.658Z,1492151930.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:51.025Z,1492151931.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:51.059Z,1492151931.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:51.484Z,1492151931.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:51.552Z,1492151931.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:51.833Z,1492151931.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:51.874Z,1492151931.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:52.233Z,1492151932.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:52.248Z,1492151932.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:52.626Z,1492151932.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:52.642Z,1492151932.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:53.033Z,1492151933.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:53.049Z,1492151933.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:53.435Z,1492151933.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:53.450Z,1492151933.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:53.845Z,1492151933.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:53.860Z,1492151933.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:54.236Z,1492151934.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:54.252Z,1492151934.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:54.643Z,1492151934.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:54.695Z,1492151934.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:55.046Z,1492151935.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:55.062Z,1492151935.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:55.425Z,1492151935.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:55.466Z,1492151935.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:55.825Z,1492151935.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:55.852Z,1492151935.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:56.239Z,1492151936.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:56.255Z,1492151936.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:56.629Z,1492151936.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:56.657Z,1492151936.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:57.025Z,1492151937.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:57.054Z,1492151937.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:57.438Z,1492151937.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:57.554Z,1492151937.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:57.837Z,1492151937.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:57.875Z,1492151937.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:58.243Z,1492151938.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:58.269Z,1492151938.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:58.657Z,1492151938.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:58.721Z,1492151938.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:59.034Z,1492151939.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:59.074Z,1492151939.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:59.474Z,1492151939.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:59.550Z,1492151939.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:38:59.836Z,1492151939.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:38:59.918Z,1492151939.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:00.242Z,1492151940.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:00.292Z,1492151940.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:00.633Z,1492151940.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:00.679Z,1492151940.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:01.036Z,1492151941.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:01.057Z,1492151941.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:01.441Z,1492151941.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:01.504Z,1492151941.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:01.837Z,1492151941.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:01.911Z,1492151941.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:02.276Z,1492151942.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:02.310Z,1492151942.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:02.631Z,1492151942.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:02.677Z,1492151942.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:03.035Z,1492151943.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:03.102Z,1492151943.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:03.490Z,1492151943.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:03.570Z,1492151943.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:03.867Z,1492151943.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:03.952Z,1492151943.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:04.236Z,1492151944.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:04.290Z,1492151944.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:04.637Z,1492151944.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:04.693Z,1492151944.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:05.034Z,1492151945.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:05.055Z,1492151945.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:05.479Z,1492151945.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:05.541Z,1492151945.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:05.857Z,1492151945.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:05.893Z,1492151945.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:06.250Z,1492151946.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:06.297Z,1492151946.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:06.688Z,1492151946.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:06.703Z,1492151946.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:07.055Z,1492151947.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:07.091Z,1492151947.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:07.441Z,1492151947.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:07.464Z,1492151947.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:07.825Z,1492151947.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:07.882Z,1492151947.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:08.227Z,1492151948.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:08.256Z,1492151948.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:08.625Z,1492151948.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:08.673Z,1492151948.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:09.033Z,1492151949.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:09.074Z,1492151949.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:09.429Z,1492151949.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:09.481Z,1492151949.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:09.825Z,1492151949.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:09.865Z,1492151949.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:10.229Z,1492151950.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:10.273Z,1492151950.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:10.626Z,1492151950.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:10.706Z,1492151950.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:11.077Z,1492151951.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:11.094Z,1492151951.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:11.445Z,1492151951.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:11.518Z,1492151951.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:11.826Z,1492151951.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:11.878Z,1492151951.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:12.225Z,1492151952.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:12.244Z,1492151952.244 [PNI_TCM](ERROR): CRC does not match. Expected:0x39007 got:0x46306
2017-04-14T06:39:12.294Z,1492151952.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:12.625Z,1492151952.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:12.689Z,1492151952.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:13.047Z,1492151953.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:13.070Z,1492151953.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:13.452Z,1492151953.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:13.494Z,1492151953.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:13.829Z,1492151953.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:13.863Z,1492151953.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:14.229Z,1492151954.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:14.266Z,1492151954.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:14.628Z,1492151954.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:14.674Z,1492151954.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:15.052Z,1492151955.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:15.076Z,1492151955.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:15.455Z,1492151955.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:15.491Z,1492151955.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:15.827Z,1492151955.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:15.874Z,1492151955.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:19.271Z,1492151959.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:19.304Z,1492151959.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:19.470Z,1492151959.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:19.511Z,1492151959.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:19.772Z,1492151959.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:19.806Z,1492151959.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:20.163Z,1492151960.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:20.181Z,1492151960.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:20.562Z,1492151960.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:20.605Z,1492151960.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:20.962Z,1492151960.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:21.004Z,1492151961.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:21.362Z,1492151961.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:21.402Z,1492151961.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:21.800Z,1492151961.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:21.896Z,1492151961.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:22.225Z,1492151962.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:22.335Z,1492151962.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:22.591Z,1492151962.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:22.622Z,1492151962.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:23.038Z,1492151963.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:23.096Z,1492151963.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:23.359Z,1492151963.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:23.456Z,1492151963.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:23.765Z,1492151963.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:23.889Z,1492151963.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:24.163Z,1492151964.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:24.182Z,1492151964.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:24.567Z,1492151964.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:24.585Z,1492151964.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:25.013Z,1492151965.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:25.076Z,1492151965.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:25.408Z,1492151965.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:25.481Z,1492151965.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:25.789Z,1492151965.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:25.864Z,1492151965.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:26.173Z,1492151966.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:26.220Z,1492151966.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:26.576Z,1492151966.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:26.592Z,1492151966.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:26.971Z,1492151966.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:26.999Z,1492151966.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:27.417Z,1492151967.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:27.466Z,1492151967.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:27.841Z,1492151967.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:27.925Z,1492151967.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:28.188Z,1492151968.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:28.260Z,1492151968.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:28.561Z,1492151968.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:28.588Z,1492151968.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:28.971Z,1492151968.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:28.987Z,1492151968.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:29.409Z,1492151969.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:29.441Z,1492151969.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:29.774Z,1492151969.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:29.828Z,1492151969.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:30.182Z,1492151970.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:30.198Z,1492151970.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:30.570Z,1492151970.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:30.586Z,1492151970.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:30.962Z,1492151970.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:30.992Z,1492151970.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:31.396Z,1492151971.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:31.441Z,1492151971.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:31.784Z,1492151971.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:31.807Z,1492151971.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:32.162Z,1492151972.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:32.191Z,1492151972.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:32.561Z,1492151972.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:32.589Z,1492151972.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:32.958Z,1492151972.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:32.994Z,1492151972.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:33.442Z,1492151973.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:33.489Z,1492151973.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:33.778Z,1492151973.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:33.834Z,1492151973.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:34.146Z,1492151974.146 [NAL9602](INFO): SBD MO Status=0, MOMSN=2120, MT Status=0, MTMSN=0
2017-04-14T06:39:34.146Z,1492151974.146 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:39:34.182Z,1492151974.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:34.198Z,1492151974.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:34.571Z,1492151974.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:34.586Z,1492151974.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:34.983Z,1492151974.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:34.999Z,1492151974.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:35.357Z,1492151975.357 [NAL9602](INFO): GPS fix at 20170414T063952: (36.802353, -121.787115)
2017-04-14T06:39:35.391Z,1492151975.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:35.436Z,1492151975.436 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:39:35.436Z,1492151975.436 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:39:35.785Z,1492151975.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:35.840Z,1492151975.840 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:35.840Z,1492151975.840 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:39:35.840Z,1492151975.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:39:35.864Z,1492151975.864 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:35.864Z,1492151975.865 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:39:35.864Z,1492151975.865 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:39:35.913Z,1492151975.912 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:39:35.913Z,1492151975.913 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:39:36.593Z,1492151976.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:36.737Z,1492151976.737 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:39:36.737Z,1492151976.737 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:39:36.738Z,1492151976.738 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:39:36.738Z,1492151976.738 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:39:36.965Z,1492151976.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:37.041Z,1492151977.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:39:37.042Z,1492151977.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:39:37.042Z,1492151977.042 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:39:37.064Z,1492151977.063 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:39:37.064Z,1492151977.064 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:39:37.064Z,1492151977.064 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:39:40.738Z,1492151980.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:40.780Z,1492151980.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:40.868Z,1492151980.868 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0112.lzma
2017-04-14T06:39:40.905Z,1492151980.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:40.948Z,1492151980.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:41.303Z,1492151981.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:41.403Z,1492151981.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:41.658Z,1492151981.658 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0112.lzma.bak
2017-04-14T06:39:41.658Z,1492151981.658 [DataOverHttps](INFO): SBD MOMSN=4885368
2017-04-14T06:39:41.695Z,1492151981.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:41.741Z,1492151981.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:42.107Z,1492151982.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:42.122Z,1492151982.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:42.477Z,1492151982.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:42.534Z,1492151982.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:45.972Z,1492151985.972 [NAL9602](INFO): Powering down
2017-04-14T06:39:46.010Z,1492151986.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:46.061Z,1492151986.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:46.169Z,1492151986.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:46.226Z,1492151986.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:46.533Z,1492151986.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:46.561Z,1492151986.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:46.933Z,1492151986.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:46.969Z,1492151986.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:47.363Z,1492151987.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:47.419Z,1492151987.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:47.738Z,1492151987.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:47.782Z,1492151987.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:51.438Z,1492151991.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:51.454Z,1492151991.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:51.830Z,1492151991.830 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0113.lzma
2017-04-14T06:39:51.909Z,1492151991.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:51.953Z,1492151991.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:52.090Z,1492151992.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:52.138Z,1492151992.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:52.672Z,1492151992.672 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0113.lzma.bak
2017-04-14T06:39:52.672Z,1492151992.672 [DataOverHttps](INFO): SBD MOMSN=4885371
2017-04-14T06:39:52.698Z,1492151992.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:52.747Z,1492151992.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:53.857Z,1492151993.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:53.893Z,1492151993.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:53.914Z,1492151993.914 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:39:53.915Z,1492151993.915 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:39:53.915Z,1492151993.915 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:39:53.972Z,1492151993.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:54.014Z,1492151994.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:58.760Z,1492151998.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:58.835Z,1492151998.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:59.017Z,1492151999.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:59.090Z,1492151999.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:59.416Z,1492151999.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:59.489Z,1492151999.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:39:59.719Z,1492151999.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:39:59.768Z,1492151999.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:00.115Z,1492152000.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:00.221Z,1492152000.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:00.527Z,1492152000.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:00.621Z,1492152000.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:00.918Z,1492152000.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:00.933Z,1492152000.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:01.343Z,1492152001.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:01.502Z,1492152001.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:01.714Z,1492152001.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:01.768Z,1492152001.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:02.123Z,1492152002.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:02.152Z,1492152002.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:02.549Z,1492152002.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:02.567Z,1492152002.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:02.927Z,1492152002.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:02.958Z,1492152002.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:03.324Z,1492152003.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:03.376Z,1492152003.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:03.725Z,1492152003.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:03.757Z,1492152003.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:04.156Z,1492152004.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:04.173Z,1492152004.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:04.518Z,1492152004.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:04.534Z,1492152004.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:04.923Z,1492152004.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:04.939Z,1492152004.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:05.332Z,1492152005.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:05.348Z,1492152005.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:05.727Z,1492152005.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:05.742Z,1492152005.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:06.121Z,1492152006.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:06.138Z,1492152006.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:06.520Z,1492152006.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:06.546Z,1492152006.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:06.917Z,1492152006.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:06.944Z,1492152006.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:07.349Z,1492152007.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:07.398Z,1492152007.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:07.721Z,1492152007.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:07.744Z,1492152007.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:08.125Z,1492152008.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:08.158Z,1492152008.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:08.520Z,1492152008.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:08.560Z,1492152008.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:08.919Z,1492152008.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:08.936Z,1492152008.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:09.331Z,1492152009.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:09.387Z,1492152009.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:09.723Z,1492152009.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:09.743Z,1492152009.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:10.121Z,1492152010.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:10.142Z,1492152010.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:10.523Z,1492152010.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:10.546Z,1492152010.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:10.913Z,1492152010.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:10.980Z,1492152010.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:11.336Z,1492152011.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:11.420Z,1492152011.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:11.729Z,1492152011.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:11.770Z,1492152011.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:12.114Z,1492152012.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:12.130Z,1492152012.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:12.530Z,1492152012.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:12.585Z,1492152012.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:12.915Z,1492152012.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:12.955Z,1492152012.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:13.366Z,1492152013.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:13.473Z,1492152013.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:13.724Z,1492152013.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:13.834Z,1492152013.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:14.123Z,1492152014.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:14.186Z,1492152014.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:14.522Z,1492152014.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:14.541Z,1492152014.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:14.929Z,1492152014.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:14.947Z,1492152014.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:15.372Z,1492152015.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:15.448Z,1492152015.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:15.718Z,1492152015.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:15.759Z,1492152015.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:16.125Z,1492152016.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:16.165Z,1492152016.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:16.522Z,1492152016.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:16.538Z,1492152016.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:16.922Z,1492152016.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:16.938Z,1492152016.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:17.317Z,1492152017.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:17.340Z,1492152017.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:17.730Z,1492152017.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:17.781Z,1492152017.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:18.122Z,1492152018.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:18.158Z,1492152018.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:18.513Z,1492152018.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:18.541Z,1492152018.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:18.935Z,1492152018.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:18.956Z,1492152018.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:19.314Z,1492152019.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:19.362Z,1492152019.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:19.714Z,1492152019.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:19.752Z,1492152019.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:20.113Z,1492152020.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:20.153Z,1492152020.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:20.518Z,1492152020.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:20.557Z,1492152020.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:20.967Z,1492152020.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:21.008Z,1492152021.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:21.319Z,1492152021.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:21.371Z,1492152021.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:21.718Z,1492152021.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:21.760Z,1492152021.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:22.134Z,1492152022.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:22.167Z,1492152022.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:22.520Z,1492152022.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:22.561Z,1492152022.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:22.922Z,1492152022.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:22.970Z,1492152022.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:23.320Z,1492152023.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:23.361Z,1492152023.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:23.722Z,1492152023.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:23.746Z,1492152023.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:24.130Z,1492152024.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:24.148Z,1492152024.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:24.521Z,1492152024.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:24.600Z,1492152024.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:24.925Z,1492152024.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:24.960Z,1492152024.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:25.324Z,1492152025.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:25.355Z,1492152025.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:25.717Z,1492152025.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:25.752Z,1492152025.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:26.113Z,1492152026.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:26.170Z,1492152026.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:26.517Z,1492152026.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:26.561Z,1492152026.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:26.918Z,1492152026.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:26.974Z,1492152026.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:27.326Z,1492152027.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:27.375Z,1492152027.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:27.713Z,1492152027.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:27.746Z,1492152027.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:28.117Z,1492152028.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:28.149Z,1492152028.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:28.513Z,1492152028.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:28.555Z,1492152028.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:28.929Z,1492152028.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:28.961Z,1492152028.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:29.372Z,1492152029.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:29.418Z,1492152029.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:29.721Z,1492152029.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:29.758Z,1492152029.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:30.119Z,1492152030.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:30.157Z,1492152030.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:30.532Z,1492152030.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:30.547Z,1492152030.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:30.928Z,1492152030.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:30.958Z,1492152030.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:31.308Z,1492152031.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:31.324Z,1492152031.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:31.719Z,1492152031.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:31.745Z,1492152031.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:32.118Z,1492152032.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:32.147Z,1492152032.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:32.519Z,1492152032.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:32.564Z,1492152032.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:32.921Z,1492152032.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:32.956Z,1492152032.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:33.332Z,1492152033.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:33.347Z,1492152033.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:33.729Z,1492152033.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:33.745Z,1492152033.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:34.134Z,1492152034.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:34.162Z,1492152034.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:34.517Z,1492152034.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:34.562Z,1492152034.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:34.921Z,1492152034.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:34.960Z,1492152034.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:35.320Z,1492152035.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:35.352Z,1492152035.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:35.721Z,1492152035.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:35.773Z,1492152035.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:36.117Z,1492152036.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:36.159Z,1492152036.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:36.513Z,1492152036.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:36.526Z,1492152036.526 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T06:40:36.559Z,1492152036.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:36.926Z,1492152036.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:36.953Z,1492152036.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:37.313Z,1492152037.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:37.366Z,1492152037.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:37.722Z,1492152037.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:37.756Z,1492152037.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:38.125Z,1492152038.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:38.195Z,1492152038.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:38.525Z,1492152038.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:38.553Z,1492152038.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:38.920Z,1492152038.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:38.947Z,1492152038.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:39.328Z,1492152039.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:39.350Z,1492152039.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:39.729Z,1492152039.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:39.758Z,1492152039.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:40.139Z,1492152040.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:40.179Z,1492152040.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:40.540Z,1492152040.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:40.555Z,1492152040.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:40.928Z,1492152040.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:40.976Z,1492152040.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:41.350Z,1492152041.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:41.377Z,1492152041.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:41.744Z,1492152041.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:41.788Z,1492152041.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:42.122Z,1492152042.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:42.162Z,1492152042.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:42.555Z,1492152042.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:42.563Z,1492152042.563 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:40:42.564Z,1492152042.564 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:40:42.564Z,1492152042.564 [BPC1](ERROR): Communications Fault
2017-04-14T06:40:42.608Z,1492152042.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:42.671Z,1492152042.671 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:40:42.924Z,1492152042.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:42.967Z,1492152042.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:43.340Z,1492152043.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:43.377Z,1492152043.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:43.724Z,1492152043.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:43.769Z,1492152043.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:43.793Z,1492152043.793 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:40:43.793Z,1492152043.793 [BPC1] No Fault, FailCount= 1
2017-04-14T06:40:44.124Z,1492152044.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:44.194Z,1492152044.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:44.529Z,1492152044.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:44.594Z,1492152044.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:44.927Z,1492152044.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:44.942Z,1492152044.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:45.329Z,1492152045.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:45.346Z,1492152045.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:45.742Z,1492152045.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:45.757Z,1492152045.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:46.132Z,1492152046.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:46.148Z,1492152046.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:46.533Z,1492152046.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:46.554Z,1492152046.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:46.913Z,1492152046.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:46.957Z,1492152046.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:47.321Z,1492152047.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:47.348Z,1492152047.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:47.718Z,1492152047.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:47.748Z,1492152047.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:48.117Z,1492152048.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:48.145Z,1492152048.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:48.513Z,1492152048.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:48.543Z,1492152048.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:48.926Z,1492152048.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:48.953Z,1492152048.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:49.319Z,1492152049.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:49.361Z,1492152049.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:49.717Z,1492152049.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:49.766Z,1492152049.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:50.136Z,1492152050.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:50.177Z,1492152050.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:50.529Z,1492152050.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:50.563Z,1492152050.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:50.956Z,1492152050.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:50.991Z,1492152050.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:51.319Z,1492152051.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:51.367Z,1492152051.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:51.754Z,1492152051.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:51.782Z,1492152051.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:52.125Z,1492152052.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:52.146Z,1492152052.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:52.525Z,1492152052.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:52.541Z,1492152052.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:52.971Z,1492152052.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:53.025Z,1492152053.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:53.348Z,1492152053.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:53.440Z,1492152053.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:53.742Z,1492152053.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:53.795Z,1492152053.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:54.130Z,1492152054.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:54.151Z,1492152054.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:54.515Z,1492152054.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:40:54.594Z,1492152054.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:40:59.998Z,1492152059.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:00.059Z,1492152060.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:00.156Z,1492152060.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:00.185Z,1492152060.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:00.561Z,1492152060.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:00.637Z,1492152060.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:00.939Z,1492152060.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:00.983Z,1492152060.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:01.335Z,1492152061.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:01.386Z,1492152061.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:01.771Z,1492152061.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:01.825Z,1492152061.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:02.137Z,1492152062.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:02.153Z,1492152062.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:02.532Z,1492152062.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:02.560Z,1492152062.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:02.930Z,1492152062.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:03.001Z,1492152063.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:03.331Z,1492152063.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:03.346Z,1492152063.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:03.746Z,1492152063.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:03.810Z,1492152063.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:04.136Z,1492152064.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:04.225Z,1492152064.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:04.541Z,1492152064.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:04.564Z,1492152064.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:04.940Z,1492152064.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:04.962Z,1492152064.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:05.352Z,1492152065.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:05.431Z,1492152065.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:05.742Z,1492152065.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:05.775Z,1492152065.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:06.141Z,1492152066.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:06.186Z,1492152066.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:06.558Z,1492152066.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:06.597Z,1492152066.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:06.944Z,1492152066.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:06.987Z,1492152066.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:07.345Z,1492152067.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:07.410Z,1492152067.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:07.742Z,1492152067.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:07.762Z,1492152067.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:08.134Z,1492152068.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:08.170Z,1492152068.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:08.544Z,1492152068.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:08.562Z,1492152068.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:08.931Z,1492152068.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:08.973Z,1492152068.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:09.329Z,1492152069.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:09.366Z,1492152069.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:09.741Z,1492152069.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:09.772Z,1492152069.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:10.136Z,1492152070.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:10.173Z,1492152070.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:10.536Z,1492152070.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:10.572Z,1492152070.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:10.941Z,1492152070.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:10.977Z,1492152070.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:11.345Z,1492152071.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:11.383Z,1492152071.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:11.745Z,1492152071.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:11.784Z,1492152071.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:12.145Z,1492152072.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:12.177Z,1492152072.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:12.538Z,1492152072.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:12.556Z,1492152072.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:12.940Z,1492152072.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:12.958Z,1492152072.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:13.345Z,1492152073.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:13.413Z,1492152073.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:13.731Z,1492152073.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:13.783Z,1492152073.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:14.135Z,1492152074.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:14.189Z,1492152074.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:14.538Z,1492152074.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:14.624Z,1492152074.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:14.966Z,1492152074.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:15.010Z,1492152075.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:15.334Z,1492152075.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:15.387Z,1492152075.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:15.731Z,1492152075.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:15.822Z,1492152075.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:16.153Z,1492152076.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:16.206Z,1492152076.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:16.539Z,1492152076.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:16.566Z,1492152076.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:16.937Z,1492152076.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:16.958Z,1492152076.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:17.345Z,1492152077.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:17.360Z,1492152077.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:17.746Z,1492152077.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:17.762Z,1492152077.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:18.186Z,1492152078.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:18.223Z,1492152078.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:18.529Z,1492152078.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:18.559Z,1492152078.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:18.931Z,1492152078.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:18.964Z,1492152078.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:19.331Z,1492152079.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:19.375Z,1492152079.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:19.731Z,1492152079.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:19.779Z,1492152079.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:20.138Z,1492152080.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:20.197Z,1492152080.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:20.540Z,1492152080.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:20.575Z,1492152080.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:20.938Z,1492152080.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:20.957Z,1492152080.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:21.337Z,1492152081.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:21.421Z,1492152081.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:21.734Z,1492152081.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:21.770Z,1492152081.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:22.133Z,1492152082.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:22.149Z,1492152082.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:22.536Z,1492152082.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:22.551Z,1492152082.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:22.941Z,1492152082.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:22.957Z,1492152082.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:23.337Z,1492152083.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:23.358Z,1492152083.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:23.735Z,1492152083.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:23.767Z,1492152083.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:24.141Z,1492152084.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:24.162Z,1492152084.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:24.545Z,1492152084.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:24.564Z,1492152084.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:24.929Z,1492152084.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:24.955Z,1492152084.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:25.329Z,1492152085.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:25.356Z,1492152085.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:25.729Z,1492152085.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:25.766Z,1492152085.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:26.129Z,1492152086.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:26.171Z,1492152086.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:26.178Z,1492152086.178 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:26.178Z,1492152086.178 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:41:26.178Z,1492152086.178 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:41:26.192Z,1492152086.192 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:41:26.537Z,1492152086.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:26.568Z,1492152086.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:26.587Z,1492152086.587 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:41:26.587Z,1492152086.587 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:41:26.944Z,1492152086.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:26.976Z,1492152086.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:26.991Z,1492152086.991 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:41:26.992Z,1492152086.991 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:41:26.992Z,1492152086.992 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:41:27.337Z,1492152087.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:27.357Z,1492152087.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:27.736Z,1492152087.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:27.787Z,1492152087.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:28.132Z,1492152088.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:28.253Z,1492152088.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:28.547Z,1492152088.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:28.562Z,1492152088.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:28.946Z,1492152088.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:29.002Z,1492152089.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:29.337Z,1492152089.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:29.352Z,1492152089.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:29.753Z,1492152089.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:29.799Z,1492152089.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:30.151Z,1492152090.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:30.215Z,1492152090.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:30.549Z,1492152090.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:30.565Z,1492152090.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:30.931Z,1492152090.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:30.959Z,1492152090.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:31.329Z,1492152091.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:31.356Z,1492152091.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:31.749Z,1492152091.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:31.770Z,1492152091.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:32.129Z,1492152092.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:32.162Z,1492152092.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:32.529Z,1492152092.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:32.565Z,1492152092.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:32.928Z,1492152092.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:32.965Z,1492152092.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:33.330Z,1492152093.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:33.367Z,1492152093.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:33.734Z,1492152093.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:33.770Z,1492152093.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:34.129Z,1492152094.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:34.171Z,1492152094.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:34.531Z,1492152094.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:34.547Z,1492152094.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:34.937Z,1492152094.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:34.968Z,1492152094.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:35.382Z,1492152095.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:35.421Z,1492152095.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:35.737Z,1492152095.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:35.778Z,1492152095.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:36.123Z,1492152096.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:36.152Z,1492152096.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:36.542Z,1492152096.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:36.561Z,1492152096.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:36.945Z,1492152096.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:36.962Z,1492152096.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:37.339Z,1492152097.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:37.391Z,1492152097.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:37.742Z,1492152097.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:37.766Z,1492152097.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:38.129Z,1492152098.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:38.155Z,1492152098.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:38.540Z,1492152098.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:38.561Z,1492152098.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:38.929Z,1492152098.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:38.972Z,1492152098.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:39.333Z,1492152099.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:39.373Z,1492152099.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:39.729Z,1492152099.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:39.762Z,1492152099.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:40.150Z,1492152100.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:40.170Z,1492152100.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:40.530Z,1492152100.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:40.566Z,1492152100.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:40.938Z,1492152100.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:41.022Z,1492152101.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:41.329Z,1492152101.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:41.362Z,1492152101.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:41.730Z,1492152101.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:41.750Z,1492152101.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:42.131Z,1492152102.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:42.221Z,1492152102.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:42.541Z,1492152102.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:42.557Z,1492152102.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:42.940Z,1492152102.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:42.994Z,1492152102.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:43.345Z,1492152103.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:43.360Z,1492152103.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:43.736Z,1492152103.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:43.790Z,1492152103.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:44.139Z,1492152104.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:44.189Z,1492152104.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:44.539Z,1492152104.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:44.555Z,1492152104.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:44.944Z,1492152104.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:44.962Z,1492152104.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:45.337Z,1492152105.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:45.354Z,1492152105.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:45.742Z,1492152105.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:45.762Z,1492152105.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:46.137Z,1492152106.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:46.155Z,1492152106.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:46.538Z,1492152106.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:46.553Z,1492152106.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:46.938Z,1492152106.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:46.953Z,1492152106.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:47.339Z,1492152107.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:47.354Z,1492152107.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:47.756Z,1492152107.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:47.801Z,1492152107.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:48.137Z,1492152108.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:48.154Z,1492152108.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:48.536Z,1492152108.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:48.562Z,1492152108.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:48.925Z,1492152108.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:48.969Z,1492152108.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:49.338Z,1492152109.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:49.362Z,1492152109.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:49.750Z,1492152109.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:49.797Z,1492152109.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:50.130Z,1492152110.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:50.154Z,1492152110.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:50.538Z,1492152110.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:50.553Z,1492152110.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:50.933Z,1492152110.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:50.966Z,1492152110.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:51.349Z,1492152111.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:51.370Z,1492152111.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:51.729Z,1492152111.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:51.762Z,1492152111.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:52.137Z,1492152112.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:52.170Z,1492152112.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:52.543Z,1492152112.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:52.573Z,1492152112.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:52.934Z,1492152112.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:52.950Z,1492152112.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:53.334Z,1492152113.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:53.378Z,1492152113.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:53.734Z,1492152113.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:53.754Z,1492152113.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:54.137Z,1492152114.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:54.177Z,1492152114.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:54.537Z,1492152114.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:54.574Z,1492152114.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:58.156Z,1492152118.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:58.250Z,1492152118.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:58.358Z,1492152118.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:58.394Z,1492152118.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:58.744Z,1492152118.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:58.800Z,1492152118.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:59.178Z,1492152119.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:59.250Z,1492152119.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:59.544Z,1492152119.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:41:59.584Z,1492152119.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:41:59.930Z,1492152119.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:00.025Z,1492152120.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:00.329Z,1492152120.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:00.391Z,1492152120.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:00.733Z,1492152120.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:00.750Z,1492152120.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:01.193Z,1492152121.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:01.235Z,1492152121.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:01.553Z,1492152121.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:01.603Z,1492152121.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:01.945Z,1492152121.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:01.986Z,1492152121.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:02.337Z,1492152122.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:02.421Z,1492152122.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:02.729Z,1492152122.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:02.764Z,1492152122.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:03.196Z,1492152123.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:03.270Z,1492152123.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:03.571Z,1492152123.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:03.632Z,1492152123.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:03.934Z,1492152123.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:03.979Z,1492152123.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:04.336Z,1492152124.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:04.396Z,1492152124.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:04.735Z,1492152124.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:04.763Z,1492152124.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:05.171Z,1492152125.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:05.325Z,1492152125.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:05.549Z,1492152125.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:05.605Z,1492152125.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:05.932Z,1492152125.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:05.972Z,1492152125.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:06.336Z,1492152126.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:06.367Z,1492152126.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:06.737Z,1492152126.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:06.768Z,1492152126.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:07.236Z,1492152127.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:07.280Z,1492152127.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:07.541Z,1492152127.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:07.570Z,1492152127.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:07.929Z,1492152127.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:07.947Z,1492152127.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:08.340Z,1492152128.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:08.379Z,1492152128.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:08.730Z,1492152128.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:08.746Z,1492152128.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:09.138Z,1492152129.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:09.159Z,1492152129.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:09.535Z,1492152129.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:09.581Z,1492152129.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:09.977Z,1492152129.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:10.005Z,1492152130.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:10.340Z,1492152130.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:10.388Z,1492152130.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:10.735Z,1492152130.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:10.763Z,1492152130.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:11.131Z,1492152131.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:11.169Z,1492152131.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:11.538Z,1492152131.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:11.565Z,1492152131.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:11.935Z,1492152131.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:11.966Z,1492152131.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:12.337Z,1492152132.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:12.419Z,1492152132.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:12.733Z,1492152132.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:12.782Z,1492152132.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:13.154Z,1492152133.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:13.210Z,1492152133.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:13.549Z,1492152133.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:13.603Z,1492152133.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:13.945Z,1492152133.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:13.973Z,1492152133.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:14.332Z,1492152134.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:14.382Z,1492152134.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:14.733Z,1492152134.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:14.794Z,1492152134.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:15.129Z,1492152135.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:15.156Z,1492152135.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:15.530Z,1492152135.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:15.557Z,1492152135.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:15.966Z,1492152135.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:15.994Z,1492152135.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:16.342Z,1492152136.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:16.380Z,1492152136.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:16.741Z,1492152136.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:16.784Z,1492152136.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:17.145Z,1492152137.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:17.183Z,1492152137.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:17.534Z,1492152137.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:17.570Z,1492152137.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:17.934Z,1492152137.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:17.954Z,1492152137.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:18.338Z,1492152138.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:18.358Z,1492152138.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:18.738Z,1492152138.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:18.755Z,1492152138.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:19.143Z,1492152139.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:19.188Z,1492152139.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:19.541Z,1492152139.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:19.592Z,1492152139.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:19.945Z,1492152139.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:19.961Z,1492152139.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:20.337Z,1492152140.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:20.364Z,1492152140.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:20.737Z,1492152140.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:20.759Z,1492152140.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:21.190Z,1492152141.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:21.214Z,1492152141.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:21.547Z,1492152141.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:21.595Z,1492152141.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:21.930Z,1492152141.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:21.968Z,1492152141.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:22.350Z,1492152142.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:22.373Z,1492152142.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:22.729Z,1492152142.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:22.762Z,1492152142.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:22.808Z,1492152142.808 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:42:23.133Z,1492152143.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:23.184Z,1492152143.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:23.532Z,1492152143.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:23.583Z,1492152143.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:23.964Z,1492152143.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:24.008Z,1492152144.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:24.341Z,1492152144.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:24.382Z,1492152144.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:24.745Z,1492152144.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:24.789Z,1492152144.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:25.136Z,1492152145.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:25.176Z,1492152145.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:25.544Z,1492152145.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:25.585Z,1492152145.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:25.950Z,1492152145.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:25.993Z,1492152145.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:26.341Z,1492152146.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:26.390Z,1492152146.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:26.745Z,1492152146.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:26.767Z,1492152146.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:27.143Z,1492152147.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:27.241Z,1492152147.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:27.536Z,1492152147.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:27.596Z,1492152147.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:27.940Z,1492152147.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:27.994Z,1492152147.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:28.351Z,1492152148.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:28.394Z,1492152148.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:28.747Z,1492152148.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:28.795Z,1492152148.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:29.151Z,1492152149.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:29.207Z,1492152149.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:29.544Z,1492152149.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:29.569Z,1492152149.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:29.966Z,1492152149.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:29.998Z,1492152149.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:30.356Z,1492152150.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:30.391Z,1492152150.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:30.744Z,1492152150.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:30.790Z,1492152150.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:31.141Z,1492152151.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:31.236Z,1492152151.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:31.560Z,1492152151.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:31.598Z,1492152151.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:31.970Z,1492152151.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:32.027Z,1492152152.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:32.340Z,1492152152.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:32.396Z,1492152152.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:32.736Z,1492152152.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:32.773Z,1492152152.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:33.181Z,1492152153.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:33.228Z,1492152153.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:33.582Z,1492152153.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:33.641Z,1492152153.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:33.942Z,1492152153.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:33.982Z,1492152153.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:34.343Z,1492152154.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:34.367Z,1492152154.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:34.759Z,1492152154.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:34.779Z,1492152154.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:35.190Z,1492152155.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:35.218Z,1492152155.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:35.535Z,1492152155.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:35.576Z,1492152155.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:35.945Z,1492152155.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:35.971Z,1492152155.971 [PNI_TCM](ERROR): CRC does not match. Expected:0x41342 got:0x37609
2017-04-14T06:42:36.009Z,1492152156.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:36.352Z,1492152156.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:36.378Z,1492152156.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:36.771Z,1492152156.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:36.818Z,1492152156.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:37.138Z,1492152157.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:37.200Z,1492152157.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:37.201Z,1492152157.201 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:42:37.201Z,1492152157.201 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:42:37.212Z,1492152157.211 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:37.212Z,1492152157.212 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:42:37.212Z,1492152157.212 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:42:37.252Z,1492152157.252 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:42:37.252Z,1492152157.252 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:42:37.546Z,1492152157.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:37.563Z,1492152157.563 [PNI_TCM](ERROR): CRC does not match. Expected:0x26723 got:0x9321
2017-04-14T06:42:37.612Z,1492152157.612 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:42:37.612Z,1492152157.612 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:42:37.613Z,1492152157.613 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:42:37.613Z,1492152157.613 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:42:37.000Z,1492152158.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:38.074Z,1492152158.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:42:38.074Z,1492152158.074 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:42:38.075Z,1492152158.075 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:42:38.109Z,1492152158.109 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:42:38.110Z,1492152158.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:42:38.110Z,1492152158.110 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:42:38.361Z,1492152158.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:38.378Z,1492152158.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:38.734Z,1492152158.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:38.791Z,1492152158.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:39.189Z,1492152159.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:39.205Z,1492152159.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:39.561Z,1492152159.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:39.684Z,1492152159.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:39.980Z,1492152159.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:40.018Z,1492152160.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:40.340Z,1492152160.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:40.400Z,1492152160.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:40.790Z,1492152160.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:40.848Z,1492152160.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:41.167Z,1492152161.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:41.311Z,1492152161.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:41.605Z,1492152161.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:41.670Z,1492152161.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:41.945Z,1492152161.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:42.031Z,1492152162.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:42.345Z,1492152162.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:42.443Z,1492152162.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:42.744Z,1492152162.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:42.818Z,1492152162.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:43.223Z,1492152163.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:43.405Z,1492152163.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:43.599Z,1492152163.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:43.696Z,1492152163.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:44.032Z,1492152164.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:44.176Z,1492152164.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:44.449Z,1492152164.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:44.522Z,1492152164.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:44.796Z,1492152164.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:44.825Z,1492152164.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:45.208Z,1492152165.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:45.254Z,1492152165.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:45.583Z,1492152165.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:45.618Z,1492152165.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:45.992Z,1492152165.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:46.042Z,1492152166.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:46.388Z,1492152166.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:46.409Z,1492152166.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:46.794Z,1492152166.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:46.813Z,1492152166.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:47.204Z,1492152167.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:47.220Z,1492152167.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:47.594Z,1492152167.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:47.609Z,1492152167.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:47.995Z,1492152167.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:48.018Z,1492152168.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:48.388Z,1492152168.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:48.426Z,1492152168.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:48.789Z,1492152168.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:48.822Z,1492152168.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:49.217Z,1492152169.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:49.244Z,1492152169.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:49.596Z,1492152169.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:49.653Z,1492152169.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:49.989Z,1492152169.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:50.027Z,1492152170.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:50.386Z,1492152170.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:50.406Z,1492152170.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:50.826Z,1492152170.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:50.842Z,1492152170.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:51.216Z,1492152171.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:51.306Z,1492152171.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:51.585Z,1492152171.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:51.606Z,1492152171.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:52.031Z,1492152172.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:52.049Z,1492152172.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:52.403Z,1492152172.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:52.440Z,1492152172.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:52.802Z,1492152172.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:52.839Z,1492152172.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:53.197Z,1492152173.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:53.214Z,1492152173.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:53.596Z,1492152173.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:53.621Z,1492152173.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:54.001Z,1492152174.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:54.016Z,1492152174.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:54.381Z,1492152174.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:54.463Z,1492152174.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:54.789Z,1492152174.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:54.829Z,1492152174.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:59.272Z,1492152179.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:59.351Z,1492152179.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:59.576Z,1492152179.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:59.634Z,1492152179.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:42:59.900Z,1492152179.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:42:59.941Z,1492152179.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:00.324Z,1492152180.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:00.398Z,1492152180.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:00.705Z,1492152180.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:00.721Z,1492152180.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:01.097Z,1492152181.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:01.198Z,1492152181.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:01.514Z,1492152181.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:01.588Z,1492152181.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:01.883Z,1492152181.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:01.930Z,1492152181.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:02.298Z,1492152182.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:02.325Z,1492152182.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:02.688Z,1492152182.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:02.738Z,1492152182.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:03.128Z,1492152183.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:03.163Z,1492152183.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:03.497Z,1492152183.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:03.513Z,1492152183.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:03.897Z,1492152183.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:03.913Z,1492152183.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:04.294Z,1492152184.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:04.336Z,1492152184.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:04.691Z,1492152184.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:04.710Z,1492152184.710 [PNI_TCM](ERROR): CRC does not match. Expected:0x32481 got:0x19612
2017-04-14T06:43:04.739Z,1492152184.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:05.100Z,1492152185.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:05.131Z,1492152185.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:05.499Z,1492152185.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:05.515Z,1492152185.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:05.894Z,1492152185.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:05.926Z,1492152185.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:06.307Z,1492152186.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:06.322Z,1492152186.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:06.684Z,1492152186.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:06.722Z,1492152186.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:07.101Z,1492152187.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:07.117Z,1492152187.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:07.486Z,1492152187.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:07.547Z,1492152187.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:07.889Z,1492152187.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:07.932Z,1492152187.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:08.300Z,1492152188.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:08.331Z,1492152188.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:08.697Z,1492152188.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:08.733Z,1492152188.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:09.089Z,1492152189.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:09.133Z,1492152189.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:09.500Z,1492152189.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:09.533Z,1492152189.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:09.901Z,1492152189.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:09.941Z,1492152189.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:10.302Z,1492152190.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:10.327Z,1492152190.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:10.717Z,1492152190.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:10.756Z,1492152190.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:11.113Z,1492152191.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:11.157Z,1492152191.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:11.497Z,1492152191.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:11.521Z,1492152191.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:11.891Z,1492152191.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:11.926Z,1492152191.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:12.296Z,1492152192.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:12.322Z,1492152192.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:12.712Z,1492152192.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:12.772Z,1492152192.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:13.092Z,1492152193.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:13.131Z,1492152193.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:13.500Z,1492152193.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:13.574Z,1492152193.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:13.904Z,1492152193.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:13.929Z,1492152193.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:14.307Z,1492152194.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:14.354Z,1492152194.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:14.721Z,1492152194.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:14.770Z,1492152194.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:15.093Z,1492152195.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:15.153Z,1492152195.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:15.500Z,1492152195.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:15.558Z,1492152195.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:15.916Z,1492152195.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:15.950Z,1492152195.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:16.324Z,1492152196.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:16.348Z,1492152196.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:16.716Z,1492152196.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:16.742Z,1492152196.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:17.097Z,1492152197.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:17.125Z,1492152197.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:17.495Z,1492152197.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:17.547Z,1492152197.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:17.897Z,1492152197.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:17.912Z,1492152197.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:18.302Z,1492152198.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:18.319Z,1492152198.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:18.675Z,1492152198.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:18.724Z,1492152198.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:19.097Z,1492152199.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:19.113Z,1492152199.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:19.499Z,1492152199.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:19.528Z,1492152199.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:19.890Z,1492152199.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:19.917Z,1492152199.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:20.292Z,1492152200.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:20.324Z,1492152200.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:20.708Z,1492152200.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:20.724Z,1492152200.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:21.086Z,1492152201.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:21.122Z,1492152201.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:21.489Z,1492152201.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:21.525Z,1492152201.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:21.893Z,1492152201.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:21.924Z,1492152201.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:22.284Z,1492152202.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:22.308Z,1492152202.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:22.714Z,1492152202.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:22.810Z,1492152202.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:23.104Z,1492152203.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:23.145Z,1492152203.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:23.493Z,1492152203.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:23.525Z,1492152203.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:23.900Z,1492152203.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:23.917Z,1492152203.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:24.302Z,1492152204.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:24.322Z,1492152204.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:24.695Z,1492152204.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:24.728Z,1492152204.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:25.096Z,1492152205.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:25.135Z,1492152205.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:25.504Z,1492152205.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:25.520Z,1492152205.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:25.887Z,1492152205.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:25.915Z,1492152205.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:26.285Z,1492152206.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:26.313Z,1492152206.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:26.689Z,1492152206.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:26.710Z,1492152206.710 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:43:26.710Z,1492152206.710 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:43:26.710Z,1492152206.710 [BPC1](ERROR): Data Fault
2017-04-14T06:43:26.720Z,1492152206.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:26.742Z,1492152206.741 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:43:27.111Z,1492152207.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:27.127Z,1492152207.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:27.524Z,1492152207.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:27.542Z,1492152207.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:27.882Z,1492152207.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:27.905Z,1492152207.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:27.982Z,1492152207.982 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:43:27.982Z,1492152207.982 [BPC1] No Fault, FailCount= 1
2017-04-14T06:43:28.334Z,1492152208.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:28.453Z,1492152208.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:28.683Z,1492152208.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:28.757Z,1492152208.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:29.085Z,1492152209.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:29.158Z,1492152209.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:29.485Z,1492152209.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:29.503Z,1492152209.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:29.886Z,1492152209.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:29.937Z,1492152209.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:30.286Z,1492152210.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:30.322Z,1492152210.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:30.684Z,1492152210.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:30.734Z,1492152210.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:31.090Z,1492152211.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:31.106Z,1492152211.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:31.497Z,1492152211.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:31.533Z,1492152211.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:31.890Z,1492152211.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:31.908Z,1492152211.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:32.291Z,1492152212.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:32.308Z,1492152212.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:32.727Z,1492152212.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:32.760Z,1492152212.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:33.085Z,1492152213.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:33.109Z,1492152213.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:33.492Z,1492152213.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:33.523Z,1492152213.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:33.887Z,1492152213.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:33.934Z,1492152213.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:34.286Z,1492152214.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:34.302Z,1492152214.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:34.689Z,1492152214.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:34.705Z,1492152214.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:35.094Z,1492152215.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:35.141Z,1492152215.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:35.491Z,1492152215.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:35.509Z,1492152215.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:35.897Z,1492152215.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:35.948Z,1492152215.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:36.285Z,1492152216.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:36.327Z,1492152216.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:36.681Z,1492152216.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:36.718Z,1492152216.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:37.082Z,1492152217.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:37.115Z,1492152217.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:37.484Z,1492152217.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:37.525Z,1492152217.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:37.896Z,1492152217.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:37.934Z,1492152217.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:38.309Z,1492152218.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:38.385Z,1492152218.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:38.692Z,1492152218.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:38.708Z,1492152218.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:39.109Z,1492152219.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:39.160Z,1492152219.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:39.493Z,1492152219.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:39.514Z,1492152219.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:39.910Z,1492152219.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:39.957Z,1492152219.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:40.297Z,1492152220.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:40.318Z,1492152220.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:40.689Z,1492152220.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:40.738Z,1492152220.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:41.095Z,1492152221.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:41.124Z,1492152221.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:41.481Z,1492152221.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:41.548Z,1492152221.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:41.901Z,1492152221.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:41.928Z,1492152221.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:42.292Z,1492152222.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:42.328Z,1492152222.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:42.694Z,1492152222.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:42.747Z,1492152222.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:43.091Z,1492152223.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:43.129Z,1492152223.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:43.490Z,1492152223.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:43.539Z,1492152223.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:43.885Z,1492152223.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:43.902Z,1492152223.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:44.292Z,1492152224.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:44.343Z,1492152224.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:44.690Z,1492152224.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:44.706Z,1492152224.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:45.086Z,1492152225.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:45.102Z,1492152225.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:45.485Z,1492152225.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:45.510Z,1492152225.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:45.888Z,1492152225.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:45.906Z,1492152225.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:46.290Z,1492152226.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:46.306Z,1492152226.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:46.692Z,1492152226.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:46.707Z,1492152226.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:47.092Z,1492152227.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:47.110Z,1492152227.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:47.492Z,1492152227.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:47.508Z,1492152227.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:47.890Z,1492152227.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:47.917Z,1492152227.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:48.291Z,1492152228.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:48.306Z,1492152228.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:48.691Z,1492152228.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:48.723Z,1492152228.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:49.081Z,1492152229.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:49.114Z,1492152229.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:49.481Z,1492152229.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:49.514Z,1492152229.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:49.899Z,1492152229.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:49.926Z,1492152229.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:50.281Z,1492152230.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:50.315Z,1492152230.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:50.682Z,1492152230.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:50.710Z,1492152230.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:51.081Z,1492152231.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:51.120Z,1492152231.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:51.489Z,1492152231.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:51.516Z,1492152231.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:51.881Z,1492152231.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:51.930Z,1492152231.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:52.281Z,1492152232.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:52.325Z,1492152232.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:52.690Z,1492152232.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:52.717Z,1492152232.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:53.081Z,1492152233.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:53.122Z,1492152233.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:53.485Z,1492152233.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:53.518Z,1492152233.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:53.893Z,1492152233.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:53.920Z,1492152233.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:54.281Z,1492152234.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:54.317Z,1492152234.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:54.681Z,1492152234.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:54.712Z,1492152234.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:55.109Z,1492152235.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:55.125Z,1492152235.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:59.270Z,1492152239.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:59.378Z,1492152239.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:59.473Z,1492152239.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:59.517Z,1492152239.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:43:59.876Z,1492152239.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:43:59.930Z,1492152239.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:00.261Z,1492152240.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:00.292Z,1492152240.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:00.661Z,1492152240.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:00.728Z,1492152240.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:01.062Z,1492152241.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:01.107Z,1492152241.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:01.473Z,1492152241.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:01.511Z,1492152241.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:01.872Z,1492152241.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:01.888Z,1492152241.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:02.272Z,1492152242.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:02.287Z,1492152242.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:02.665Z,1492152242.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:02.686Z,1492152242.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:03.073Z,1492152243.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:03.094Z,1492152243.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:03.457Z,1492152243.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:03.490Z,1492152243.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:03.874Z,1492152243.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:03.890Z,1492152243.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:04.265Z,1492152244.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:04.296Z,1492152244.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:04.659Z,1492152244.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:04.692Z,1492152244.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:05.057Z,1492152245.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:05.088Z,1492152245.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:05.471Z,1492152245.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:05.495Z,1492152245.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:05.859Z,1492152245.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:05.889Z,1492152245.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:06.277Z,1492152246.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:06.329Z,1492152246.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:06.668Z,1492152246.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:06.704Z,1492152246.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:07.075Z,1492152247.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:07.090Z,1492152247.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:07.468Z,1492152247.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:07.501Z,1492152247.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:07.857Z,1492152247.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:07.895Z,1492152247.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:08.286Z,1492152248.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:08.303Z,1492152248.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:08.657Z,1492152248.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:08.696Z,1492152248.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:09.058Z,1492152249.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:09.091Z,1492152249.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:09.494Z,1492152249.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:09.536Z,1492152249.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:09.857Z,1492152249.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:09.902Z,1492152249.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:10.266Z,1492152250.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:10.293Z,1492152250.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:10.657Z,1492152250.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:10.693Z,1492152250.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:11.057Z,1492152251.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:11.092Z,1492152251.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:11.478Z,1492152251.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:11.504Z,1492152251.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:11.865Z,1492152251.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:11.894Z,1492152251.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:12.257Z,1492152252.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:12.295Z,1492152252.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:12.666Z,1492152252.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:12.702Z,1492152252.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:13.061Z,1492152253.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:13.155Z,1492152253.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:13.465Z,1492152253.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:13.486Z,1492152253.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:13.872Z,1492152253.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:13.892Z,1492152253.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:14.258Z,1492152254.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:14.322Z,1492152254.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:14.669Z,1492152254.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:14.685Z,1492152254.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:15.059Z,1492152255.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:15.138Z,1492152255.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:15.463Z,1492152255.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:15.493Z,1492152255.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:15.868Z,1492152255.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:15.923Z,1492152255.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:16.255Z,1492152256.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:16.297Z,1492152256.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:16.670Z,1492152256.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:16.686Z,1492152256.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:17.078Z,1492152257.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:17.153Z,1492152257.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:17.482Z,1492152257.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:17.514Z,1492152257.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:17.877Z,1492152257.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:17.897Z,1492152257.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:18.267Z,1492152258.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:18.295Z,1492152258.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:18.654Z,1492152258.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:18.690Z,1492152258.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:19.057Z,1492152259.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:19.094Z,1492152259.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:19.457Z,1492152259.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:19.485Z,1492152259.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:19.857Z,1492152259.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:19.890Z,1492152259.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:20.266Z,1492152260.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:20.281Z,1492152260.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:20.663Z,1492152260.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:20.678Z,1492152260.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:21.065Z,1492152261.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:21.081Z,1492152261.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:21.463Z,1492152261.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:21.487Z,1492152261.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:21.866Z,1492152261.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:21.886Z,1492152261.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:22.265Z,1492152262.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:22.281Z,1492152262.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:22.670Z,1492152262.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:22.690Z,1492152262.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:23.057Z,1492152263.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:23.084Z,1492152263.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:23.477Z,1492152263.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:23.506Z,1492152263.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:23.862Z,1492152263.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:23.894Z,1492152263.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:24.257Z,1492152264.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:24.284Z,1492152264.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:24.676Z,1492152264.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:24.711Z,1492152264.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:25.067Z,1492152265.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:25.101Z,1492152265.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:25.504Z,1492152265.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:25.520Z,1492152265.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:25.862Z,1492152265.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:25.895Z,1492152265.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:26.258Z,1492152266.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:26.273Z,1492152266.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:26.669Z,1492152266.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:26.677Z,1492152266.677 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:44:26.678Z,1492152266.678 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:44:26.678Z,1492152266.678 [BPC1](ERROR): Data Fault
2017-04-14T06:44:26.687Z,1492152266.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:26.738Z,1492152266.738 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:44:27.065Z,1492152267.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:27.087Z,1492152267.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:27.094Z,1492152267.093 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:27.094Z,1492152267.094 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:44:27.094Z,1492152267.094 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:44:27.132Z,1492152267.132 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:44:27.472Z,1492152267.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:27.488Z,1492152267.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:27.523Z,1492152267.523 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:44:27.523Z,1492152267.523 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:44:27.871Z,1492152267.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:27.886Z,1492152267.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:27.893Z,1492152267.893 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:44:27.893Z,1492152267.893 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:44:27.894Z,1492152267.894 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:44:27.906Z,1492152267.906 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:44:27.906Z,1492152267.906 [BPC1] No Fault, FailCount= 1
2017-04-14T06:44:28.257Z,1492152268.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:28.346Z,1492152268.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:28.661Z,1492152268.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:28.729Z,1492152268.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:29.061Z,1492152269.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:29.088Z,1492152269.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:29.463Z,1492152269.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:29.483Z,1492152269.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:29.877Z,1492152269.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:29.898Z,1492152269.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:30.269Z,1492152270.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:30.300Z,1492152270.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:30.669Z,1492152270.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:30.685Z,1492152270.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:31.057Z,1492152271.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:31.084Z,1492152271.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:31.469Z,1492152271.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:31.485Z,1492152271.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:31.869Z,1492152271.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:31.886Z,1492152271.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:32.257Z,1492152272.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:32.293Z,1492152272.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:32.658Z,1492152272.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:32.694Z,1492152272.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:33.057Z,1492152273.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:33.091Z,1492152273.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:33.461Z,1492152273.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:33.498Z,1492152273.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:33.857Z,1492152273.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:33.874Z,1492152273.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:34.287Z,1492152274.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:34.302Z,1492152274.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:34.662Z,1492152274.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:34.701Z,1492152274.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:35.062Z,1492152275.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:35.102Z,1492152275.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:35.458Z,1492152275.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:35.474Z,1492152275.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:35.869Z,1492152275.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:35.905Z,1492152275.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:36.262Z,1492152276.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:36.303Z,1492152276.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:36.662Z,1492152276.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:36.678Z,1492152276.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:37.073Z,1492152277.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:37.108Z,1492152277.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:37.469Z,1492152277.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:37.484Z,1492152277.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:37.861Z,1492152277.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:37.909Z,1492152277.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:38.265Z,1492152278.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:38.298Z,1492152278.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:38.657Z,1492152278.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:38.696Z,1492152278.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:39.061Z,1492152279.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:39.098Z,1492152279.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:39.456Z,1492152279.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:39.494Z,1492152279.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:39.869Z,1492152279.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:39.902Z,1492152279.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:40.257Z,1492152280.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:40.314Z,1492152280.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:40.659Z,1492152280.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:40.675Z,1492152280.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:41.062Z,1492152281.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:41.123Z,1492152281.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:41.468Z,1492152281.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:41.491Z,1492152281.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:41.863Z,1492152281.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:41.918Z,1492152281.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:42.266Z,1492152282.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:42.283Z,1492152282.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:42.658Z,1492152282.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:42.718Z,1492152282.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:43.062Z,1492152283.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:43.079Z,1492152283.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:43.469Z,1492152283.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:43.519Z,1492152283.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:43.867Z,1492152283.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:43.883Z,1492152283.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:44.270Z,1492152284.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:44.290Z,1492152284.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:44.666Z,1492152284.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:44.686Z,1492152284.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:45.072Z,1492152285.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:45.090Z,1492152285.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:45.473Z,1492152285.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:45.504Z,1492152285.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:45.869Z,1492152285.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:45.906Z,1492152285.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:46.258Z,1492152286.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:46.274Z,1492152286.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:46.669Z,1492152286.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:46.685Z,1492152286.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:47.068Z,1492152287.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:47.084Z,1492152287.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:47.465Z,1492152287.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:47.481Z,1492152287.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:47.865Z,1492152287.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:47.886Z,1492152287.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:48.265Z,1492152288.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:48.281Z,1492152288.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:48.679Z,1492152288.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:48.726Z,1492152288.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:49.072Z,1492152289.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:49.114Z,1492152289.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:49.467Z,1492152289.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:49.483Z,1492152289.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:49.864Z,1492152289.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:49.881Z,1492152289.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:50.302Z,1492152290.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:50.373Z,1492152290.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:50.670Z,1492152290.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:50.686Z,1492152290.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:51.070Z,1492152291.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:51.091Z,1492152291.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:51.457Z,1492152291.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:51.498Z,1492152291.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:51.859Z,1492152291.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:51.896Z,1492152291.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:52.266Z,1492152292.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:52.305Z,1492152292.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:52.660Z,1492152292.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:52.701Z,1492152292.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:53.069Z,1492152293.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:53.100Z,1492152293.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:53.474Z,1492152293.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:53.513Z,1492152293.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:53.873Z,1492152293.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:53.905Z,1492152293.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:54.300Z,1492152294.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:54.365Z,1492152294.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:54.381Z,1492152294.381 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:44:54.381Z,1492152294.381 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:44:54.381Z,1492152294.381 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:44:54.381Z,1492152294.381 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:44:54.669Z,1492152294.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:54.710Z,1492152294.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:54.736Z,1492152294.736 [Default:CheckIn:D] Stopped
2017-04-14T06:44:54.736Z,1492152294.736 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:44:55.077Z,1492152295.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:55.137Z,1492152295.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:55.154Z,1492152295.154 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 198.823617 min 
2017-04-14T06:44:55.154Z,1492152295.154 [Default:CheckIn:E] Stopped
2017-04-14T06:44:55.154Z,1492152295.154 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:44:55.154Z,1492152295.154 [Default:CheckIn] Stopped
2017-04-14T06:44:55.154Z,1492152295.154 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:44:55.155Z,1492152295.155 [Default:CheckIn](INFO): Running loop #28
2017-04-14T06:44:55.155Z,1492152295.155 [Default:CheckIn] Running Loop=28
2017-04-14T06:44:55.155Z,1492152295.155 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:44:55.155Z,1492152295.155 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:44:55.471Z,1492152295.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:55.541Z,1492152295.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:59.027Z,1492152299.027 [NAL9602](INFO): Powering up
2017-04-14T06:44:59.044Z,1492152299.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:59.077Z,1492152299.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:59.234Z,1492152299.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:59.290Z,1492152299.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:59.565Z,1492152299.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:44:59.586Z,1492152299.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:44:59.973Z,1492152299.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:00.030Z,1492152300.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:00.367Z,1492152300.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:00.389Z,1492152300.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:00.764Z,1492152300.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:00.857Z,1492152300.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:01.157Z,1492152301.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:01.213Z,1492152301.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:01.561Z,1492152301.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:01.588Z,1492152301.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:01.957Z,1492152301.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:01.995Z,1492152301.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:02.361Z,1492152302.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:02.388Z,1492152302.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:02.757Z,1492152302.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:02.832Z,1492152302.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:03.168Z,1492152303.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:03.189Z,1492152303.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:03.558Z,1492152303.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:03.621Z,1492152303.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:03.961Z,1492152303.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:04.047Z,1492152304.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:04.398Z,1492152304.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:04.436Z,1492152304.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:04.760Z,1492152304.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:04.938Z,1492152304.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:05.167Z,1492152305.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:05.229Z,1492152305.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:05.572Z,1492152305.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:05.587Z,1492152305.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:05.965Z,1492152305.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:05.982Z,1492152305.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:06.380Z,1492152306.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:06.396Z,1492152306.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:06.754Z,1492152306.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:06.844Z,1492152306.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:07.166Z,1492152307.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:07.191Z,1492152307.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:07.561Z,1492152307.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:07.590Z,1492152307.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:07.965Z,1492152307.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:07.980Z,1492152307.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:08.365Z,1492152308.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:08.383Z,1492152308.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:08.777Z,1492152308.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:08.821Z,1492152308.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:09.164Z,1492152309.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:09.196Z,1492152309.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:09.576Z,1492152309.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:09.602Z,1492152309.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:09.953Z,1492152309.953 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:45:09.970Z,1492152309.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:10.006Z,1492152310.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:10.362Z,1492152310.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:10.397Z,1492152310.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:10.780Z,1492152310.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:10.806Z,1492152310.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:11.214Z,1492152311.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:11.264Z,1492152311.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:11.572Z,1492152311.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:11.594Z,1492152311.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:11.973Z,1492152311.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:11.989Z,1492152311.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:12.376Z,1492152312.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:12.398Z,1492152312.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:12.779Z,1492152312.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:12.802Z,1492152312.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:13.212Z,1492152313.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:13.311Z,1492152313.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:13.575Z,1492152313.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:13.639Z,1492152313.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:13.966Z,1492152313.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:13.993Z,1492152313.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:14.357Z,1492152314.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:14.398Z,1492152314.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:14.783Z,1492152314.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:14.878Z,1492152314.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:15.166Z,1492152315.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:15.228Z,1492152315.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:15.566Z,1492152315.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:15.626Z,1492152315.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:15.969Z,1492152315.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:15.990Z,1492152315.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:16.365Z,1492152316.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:16.386Z,1492152316.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:16.843Z,1492152316.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:16.920Z,1492152316.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:17.174Z,1492152317.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:17.198Z,1492152317.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:17.558Z,1492152317.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:17.594Z,1492152317.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:17.958Z,1492152317.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:17.985Z,1492152317.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:18.378Z,1492152318.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:18.402Z,1492152318.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:18.794Z,1492152318.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:18.872Z,1492152318.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:19.158Z,1492152319.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:19.174Z,1492152319.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:19.569Z,1492152319.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:19.585Z,1492152319.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:19.968Z,1492152319.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:19.983Z,1492152319.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:20.360Z,1492152320.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:20.376Z,1492152320.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:20.787Z,1492152320.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:20.873Z,1492152320.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:21.180Z,1492152321.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:21.284Z,1492152321.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:21.570Z,1492152321.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:21.603Z,1492152321.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:21.967Z,1492152321.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:21.992Z,1492152321.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:22.359Z,1492152322.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:22.403Z,1492152322.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:22.765Z,1492152322.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:22.785Z,1492152322.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:23.166Z,1492152323.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:23.194Z,1492152323.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:23.566Z,1492152323.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:23.582Z,1492152323.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:23.977Z,1492152323.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:23.998Z,1492152323.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:24.373Z,1492152324.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:24.394Z,1492152324.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:24.424Z,1492152324.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:24.757Z,1492152324.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:24.783Z,1492152324.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:25.220Z,1492152325.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:25.245Z,1492152325.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:25.290Z,1492152325.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:25.561Z,1492152325.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:25.595Z,1492152325.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:25.624Z,1492152325.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:25.957Z,1492152325.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:25.995Z,1492152325.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:26.357Z,1492152326.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:26.387Z,1492152326.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:26.763Z,1492152326.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:26.779Z,1492152326.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:27.207Z,1492152327.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:27.225Z,1492152327.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:27.564Z,1492152327.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:27.580Z,1492152327.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:27.954Z,1492152327.954 [NAL9602](INFO): SBD MO Status=0, MOMSN=2121, MT Status=0, MTMSN=0
2017-04-14T06:45:27.954Z,1492152327.954 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:45:27.971Z,1492152327.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:28.038Z,1492152328.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:28.364Z,1492152328.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:28.380Z,1492152328.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:28.807Z,1492152328.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:28.893Z,1492152328.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:29.182Z,1492152329.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:29.198Z,1492152329.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:29.576Z,1492152329.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:29.628Z,1492152329.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:29.959Z,1492152329.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:30.006Z,1492152330.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:30.364Z,1492152330.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:30.393Z,1492152330.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:30.824Z,1492152330.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:30.869Z,1492152330.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:31.185Z,1492152331.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:31.201Z,1492152331.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:31.582Z,1492152331.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:31.598Z,1492152331.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:31.967Z,1492152331.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:32.006Z,1492152332.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:32.357Z,1492152332.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:32.386Z,1492152332.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:32.818Z,1492152332.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:32.854Z,1492152332.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:33.166Z,1492152333.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:33.232Z,1492152333.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:33.568Z,1492152333.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:33.584Z,1492152333.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:33.966Z,1492152333.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:33.986Z,1492152333.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:34.375Z,1492152334.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:34.391Z,1492152334.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:34.851Z,1492152334.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:34.876Z,1492152334.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:35.180Z,1492152335.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:35.207Z,1492152335.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:35.566Z,1492152335.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:35.606Z,1492152335.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:35.966Z,1492152335.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:35.982Z,1492152335.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:36.368Z,1492152336.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:36.384Z,1492152336.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:36.776Z,1492152336.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:36.889Z,1492152336.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:37.168Z,1492152337.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:37.204Z,1492152337.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:37.572Z,1492152337.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:37.622Z,1492152337.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:37.975Z,1492152337.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:38.042Z,1492152338.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:38.359Z,1492152338.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:38.407Z,1492152338.407 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:38.407Z,1492152338.407 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:45:38.411Z,1492152338.411 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:45:38.438Z,1492152338.438 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:38.438Z,1492152338.438 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:45:38.438Z,1492152338.438 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:45:38.539Z,1492152338.539 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:45:38.539Z,1492152338.539 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:45:38.772Z,1492152338.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:38.872Z,1492152338.872 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:45:38.873Z,1492152338.872 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:45:38.873Z,1492152338.873 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:45:38.873Z,1492152338.873 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:45:39.218Z,1492152339.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:39.281Z,1492152339.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:45:39.282Z,1492152339.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:45:39.282Z,1492152339.282 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:45:39.323Z,1492152339.323 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:45:39.324Z,1492152339.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:45:39.324Z,1492152339.324 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:45:39.579Z,1492152339.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:39.595Z,1492152339.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:39.960Z,1492152339.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:39.988Z,1492152339.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:40.394Z,1492152340.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:40.454Z,1492152340.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:40.786Z,1492152340.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:40.819Z,1492152340.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:41.196Z,1492152341.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:41.233Z,1492152341.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:41.566Z,1492152341.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:41.622Z,1492152341.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:41.971Z,1492152341.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:42.086Z,1492152342.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:42.401Z,1492152342.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:42.459Z,1492152342.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:42.835Z,1492152342.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:42.950Z,1492152342.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:43.176Z,1492152343.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:43.226Z,1492152343.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:43.565Z,1492152343.565 [NAL9602](INFO): GPS fix at 20170414T064601: (36.802357, -121.787078)
2017-04-14T06:45:43.594Z,1492152343.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:43.738Z,1492152343.738 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:45:43.738Z,1492152343.738 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:45:43.972Z,1492152343.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:44.038Z,1492152344.038 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:44.038Z,1492152344.038 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:45:44.038Z,1492152344.038 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:45:44.064Z,1492152344.064 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:44.064Z,1492152344.064 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:45:44.064Z,1492152344.064 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:45:44.133Z,1492152344.133 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:45:44.133Z,1492152344.133 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:45:44.669Z,1492152344.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:44.863Z,1492152344.863 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:45:44.863Z,1492152344.863 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:45:44.876Z,1492152344.876 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:45:44.876Z,1492152344.876 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:45:45.068Z,1492152345.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:45.091Z,1492152345.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:45:45.115Z,1492152345.115 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:45:45.116Z,1492152345.116 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:45:45.129Z,1492152345.129 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:45:45.130Z,1492152345.129 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:45:45.130Z,1492152345.130 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:45:48.601Z,1492152348.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:48.627Z,1492152348.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:48.782Z,1492152348.782 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20170414T032153/Courier0116.lzma
2017-04-14T06:45:48.833Z,1492152348.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:48.881Z,1492152348.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:49.093Z,1492152349.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:49.157Z,1492152349.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:49.462Z,1492152349.462 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0116.lzma.bak
2017-04-14T06:45:49.462Z,1492152349.462 [DataOverHttps](INFO): SBD MOMSN=4885375
2017-04-14T06:45:49.501Z,1492152349.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:49.529Z,1492152349.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:49.909Z,1492152349.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:49.949Z,1492152349.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:50.288Z,1492152350.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:50.306Z,1492152350.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:53.877Z,1492152353.877 [NAL9602](INFO): Powering down
2017-04-14T06:45:53.896Z,1492152353.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:53.914Z,1492152353.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:54.053Z,1492152354.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:54.069Z,1492152354.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:54.415Z,1492152354.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:54.452Z,1492152354.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:54.825Z,1492152354.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:54.832Z,1492152354.832 [PNI_TCM](ERROR): CRC does not match. Expected:0x31055 got:0x46269
2017-04-14T06:45:54.865Z,1492152354.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:55.227Z,1492152355.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:55.265Z,1492152355.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:55.633Z,1492152355.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:55.702Z,1492152355.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:59.146Z,1492152359.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:59.236Z,1492152359.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:59.295Z,1492152359.295 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0117.lzma
2017-04-14T06:45:59.322Z,1492152359.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:59.346Z,1492152359.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:45:59.719Z,1492152359.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:45:59.738Z,1492152359.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:00.086Z,1492152360.086 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0117.lzma.bak
2017-04-14T06:46:00.086Z,1492152360.086 [DataOverHttps](INFO): SBD MOMSN=4885378
2017-04-14T06:46:00.134Z,1492152360.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:00.178Z,1492152360.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:00.527Z,1492152360.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:00.544Z,1492152360.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:00.577Z,1492152360.577 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:46:00.577Z,1492152360.577 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:46:00.577Z,1492152360.577 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:46:00.907Z,1492152360.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:00.985Z,1492152360.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:07.735Z,1492152367.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:07.787Z,1492152367.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:07.902Z,1492152367.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:07.946Z,1492152367.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:08.286Z,1492152368.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:08.309Z,1492152368.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:08.729Z,1492152368.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:08.753Z,1492152368.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:09.137Z,1492152369.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:09.157Z,1492152369.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:09.479Z,1492152369.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:09.524Z,1492152369.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:09.889Z,1492152369.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:09.905Z,1492152369.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:10.286Z,1492152370.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:10.304Z,1492152370.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:10.723Z,1492152370.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:10.818Z,1492152370.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:11.078Z,1492152371.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:11.110Z,1492152371.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:11.488Z,1492152371.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:11.528Z,1492152371.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:11.893Z,1492152371.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:11.930Z,1492152371.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:12.290Z,1492152372.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:12.334Z,1492152372.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:12.696Z,1492152372.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:12.794Z,1492152372.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:13.081Z,1492152373.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:13.108Z,1492152373.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:13.479Z,1492152373.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:13.515Z,1492152373.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:13.887Z,1492152373.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:13.903Z,1492152373.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:14.278Z,1492152374.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:14.326Z,1492152374.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:14.736Z,1492152374.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:14.784Z,1492152374.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:15.090Z,1492152375.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:15.144Z,1492152375.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:15.486Z,1492152375.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:15.524Z,1492152375.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:15.896Z,1492152375.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:15.927Z,1492152375.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:16.286Z,1492152376.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:16.303Z,1492152376.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:16.738Z,1492152376.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:16.804Z,1492152376.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:17.088Z,1492152377.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:17.104Z,1492152377.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:17.513Z,1492152377.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:17.573Z,1492152377.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:17.895Z,1492152377.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:17.913Z,1492152377.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:18.280Z,1492152378.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:18.361Z,1492152378.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:18.686Z,1492152378.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:18.906Z,1492152378.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:19.086Z,1492152379.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:19.116Z,1492152379.116 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:46:19.116Z,1492152379.116 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:46:19.116Z,1492152379.116 [BPC1](ERROR): Data Fault
2017-04-14T06:46:19.130Z,1492152379.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:19.198Z,1492152379.198 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:46:19.490Z,1492152379.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:19.527Z,1492152379.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:19.886Z,1492152379.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:19.944Z,1492152379.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:20.296Z,1492152380.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:20.327Z,1492152380.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:20.364Z,1492152380.364 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:46:20.364Z,1492152380.364 [BPC1] No Fault, FailCount= 1
2017-04-14T06:46:20.690Z,1492152380.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:20.774Z,1492152380.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:21.124Z,1492152381.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:21.225Z,1492152381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:21.480Z,1492152381.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:21.514Z,1492152381.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:21.882Z,1492152381.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:21.915Z,1492152381.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:22.291Z,1492152382.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:22.310Z,1492152382.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:22.690Z,1492152382.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:22.734Z,1492152382.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:23.095Z,1492152383.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:23.147Z,1492152383.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:23.474Z,1492152383.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:23.528Z,1492152383.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:23.880Z,1492152383.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:23.928Z,1492152383.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:24.277Z,1492152384.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:24.316Z,1492152384.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:24.756Z,1492152384.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:24.812Z,1492152384.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:25.077Z,1492152385.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:25.113Z,1492152385.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:25.491Z,1492152385.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:25.522Z,1492152385.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:25.890Z,1492152385.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:25.942Z,1492152385.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:26.285Z,1492152386.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:26.300Z,1492152386.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:26.748Z,1492152386.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:26.814Z,1492152386.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:27.084Z,1492152387.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:27.100Z,1492152387.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:27.507Z,1492152387.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:27.550Z,1492152387.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:27.884Z,1492152387.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:27.910Z,1492152387.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:28.292Z,1492152388.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:28.314Z,1492152388.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:28.754Z,1492152388.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:28.810Z,1492152388.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:29.080Z,1492152389.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:29.109Z,1492152389.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:29.477Z,1492152389.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:29.510Z,1492152389.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:29.907Z,1492152389.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:29.923Z,1492152389.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:30.310Z,1492152390.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:30.347Z,1492152390.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:30.732Z,1492152390.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:30.784Z,1492152390.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:31.086Z,1492152391.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:31.102Z,1492152391.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:31.489Z,1492152391.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:31.505Z,1492152391.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:31.902Z,1492152391.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:31.937Z,1492152391.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:32.285Z,1492152392.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:32.306Z,1492152392.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:32.677Z,1492152392.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:32.782Z,1492152392.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:33.113Z,1492152393.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:33.214Z,1492152393.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:33.485Z,1492152393.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:33.525Z,1492152393.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:33.894Z,1492152393.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:33.942Z,1492152393.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:34.278Z,1492152394.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:34.294Z,1492152394.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:34.689Z,1492152394.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:34.738Z,1492152394.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:35.089Z,1492152395.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:35.133Z,1492152395.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:35.482Z,1492152395.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:35.538Z,1492152395.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:35.884Z,1492152395.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:35.902Z,1492152395.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:36.289Z,1492152396.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:36.305Z,1492152396.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:36.689Z,1492152396.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:36.709Z,1492152396.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:37.087Z,1492152397.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:37.106Z,1492152397.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:37.489Z,1492152397.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:37.505Z,1492152397.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:37.886Z,1492152397.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:37.902Z,1492152397.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:38.278Z,1492152398.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:38.314Z,1492152398.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:38.717Z,1492152398.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:38.775Z,1492152398.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:39.077Z,1492152399.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:39.093Z,1492152399.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:39.487Z,1492152399.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:39.528Z,1492152399.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:39.888Z,1492152399.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:39.904Z,1492152399.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:40.282Z,1492152400.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:40.298Z,1492152400.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:40.720Z,1492152400.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:40.774Z,1492152400.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:41.094Z,1492152401.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:41.110Z,1492152401.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:41.482Z,1492152401.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:41.499Z,1492152401.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:41.885Z,1492152401.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:41.901Z,1492152401.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:42.296Z,1492152402.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:42.311Z,1492152402.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:42.725Z,1492152402.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:42.782Z,1492152402.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:43.090Z,1492152403.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:43.123Z,1492152403.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:43.483Z,1492152403.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:43.499Z,1492152403.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:43.883Z,1492152403.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:43.899Z,1492152403.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:44.283Z,1492152404.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:44.300Z,1492152404.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:44.708Z,1492152404.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:44.749Z,1492152404.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:45.081Z,1492152405.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:45.100Z,1492152405.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:45.492Z,1492152405.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:45.523Z,1492152405.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:45.886Z,1492152405.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:45.920Z,1492152405.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:46.290Z,1492152406.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:46.306Z,1492152406.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:46.705Z,1492152406.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:46.784Z,1492152406.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:47.109Z,1492152407.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:47.161Z,1492152407.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:47.490Z,1492152407.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:47.595Z,1492152407.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:47.886Z,1492152407.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:47.965Z,1492152407.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:48.279Z,1492152408.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:48.308Z,1492152408.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:48.677Z,1492152408.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:48.752Z,1492152408.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:49.079Z,1492152409.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:49.114Z,1492152409.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:49.498Z,1492152409.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:49.564Z,1492152409.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:49.881Z,1492152409.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:49.908Z,1492152409.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:50.277Z,1492152410.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:50.321Z,1492152410.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:50.797Z,1492152410.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:50.827Z,1492152410.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:51.097Z,1492152411.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:51.138Z,1492152411.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:51.491Z,1492152411.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:51.514Z,1492152411.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:51.887Z,1492152411.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:51.906Z,1492152411.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:52.287Z,1492152412.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:52.303Z,1492152412.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:52.700Z,1492152412.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:52.757Z,1492152412.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:53.093Z,1492152413.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:53.122Z,1492152413.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:53.482Z,1492152413.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:53.510Z,1492152413.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:53.898Z,1492152413.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:53.914Z,1492152413.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:54.312Z,1492152414.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:54.336Z,1492152414.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:54.723Z,1492152414.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:54.783Z,1492152414.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:55.088Z,1492152415.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:55.130Z,1492152415.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:55.487Z,1492152415.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:55.503Z,1492152415.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:55.887Z,1492152415.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:55.904Z,1492152415.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:56.285Z,1492152416.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:56.300Z,1492152416.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:56.712Z,1492152416.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:56.786Z,1492152416.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:57.078Z,1492152417.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:57.127Z,1492152417.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:57.493Z,1492152417.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:57.523Z,1492152417.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:57.893Z,1492152417.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:57.927Z,1492152417.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:58.285Z,1492152418.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:58.328Z,1492152418.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:58.723Z,1492152418.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:58.750Z,1492152418.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:59.083Z,1492152419.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:59.129Z,1492152419.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:59.486Z,1492152419.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:59.503Z,1492152419.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:46:59.891Z,1492152419.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:46:59.928Z,1492152419.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:00.305Z,1492152420.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:00.354Z,1492152420.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:00.767Z,1492152420.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:00.820Z,1492152420.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:01.106Z,1492152421.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:01.138Z,1492152421.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:05.983Z,1492152425.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:06.091Z,1492152426.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:06.199Z,1492152426.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:06.243Z,1492152426.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:06.570Z,1492152426.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:06.668Z,1492152426.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:06.961Z,1492152426.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:07.018Z,1492152427.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:07.358Z,1492152427.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:07.374Z,1492152427.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:07.763Z,1492152427.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:07.811Z,1492152427.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:08.163Z,1492152428.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:08.229Z,1492152428.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:08.557Z,1492152428.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:08.573Z,1492152428.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:08.967Z,1492152428.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:08.983Z,1492152428.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:09.345Z,1492152429.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:09.386Z,1492152429.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:09.757Z,1492152429.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:09.793Z,1492152429.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:10.150Z,1492152430.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:10.166Z,1492152430.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:10.551Z,1492152430.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:10.567Z,1492152430.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:10.949Z,1492152430.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:10.976Z,1492152430.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:11.345Z,1492152431.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:11.372Z,1492152431.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:11.746Z,1492152431.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:11.773Z,1492152431.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:12.142Z,1492152432.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:12.170Z,1492152432.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:12.545Z,1492152432.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:12.649Z,1492152432.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:12.950Z,1492152432.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:12.970Z,1492152432.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:13.359Z,1492152433.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:13.395Z,1492152433.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:13.751Z,1492152433.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:13.767Z,1492152433.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:14.152Z,1492152434.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:14.167Z,1492152434.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:14.552Z,1492152434.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:14.568Z,1492152434.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:14.946Z,1492152434.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:14.973Z,1492152434.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:15.347Z,1492152435.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:15.380Z,1492152435.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:15.758Z,1492152435.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:15.774Z,1492152435.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:16.146Z,1492152436.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:16.173Z,1492152436.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:16.545Z,1492152436.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:16.581Z,1492152436.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:16.993Z,1492152436.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:17.026Z,1492152437.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:17.354Z,1492152437.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:17.384Z,1492152437.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:17.753Z,1492152437.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:17.786Z,1492152437.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:18.153Z,1492152438.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:18.185Z,1492152438.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:18.553Z,1492152438.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:18.584Z,1492152438.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:19.009Z,1492152439.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:19.046Z,1492152439.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:19.345Z,1492152439.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:19.366Z,1492152439.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:19.751Z,1492152439.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:19.767Z,1492152439.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:20.152Z,1492152440.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:20.206Z,1492152440.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:20.554Z,1492152440.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:20.672Z,1492152440.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:20.958Z,1492152440.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:20.974Z,1492152440.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:21.372Z,1492152441.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:21.388Z,1492152441.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:21.749Z,1492152441.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:21.802Z,1492152441.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:22.161Z,1492152442.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:22.193Z,1492152442.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:22.547Z,1492152442.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:22.651Z,1492152442.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:22.956Z,1492152442.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:23.026Z,1492152443.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:23.345Z,1492152443.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:23.378Z,1492152443.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:23.745Z,1492152443.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:23.772Z,1492152443.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:24.145Z,1492152444.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:24.173Z,1492152444.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:24.595Z,1492152444.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:24.679Z,1492152444.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:24.945Z,1492152444.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:24.979Z,1492152444.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:25.346Z,1492152445.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:25.374Z,1492152445.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:25.782Z,1492152445.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:25.848Z,1492152445.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:26.143Z,1492152446.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:26.158Z,1492152446.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:26.546Z,1492152446.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:26.627Z,1492152446.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:26.957Z,1492152446.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:26.994Z,1492152446.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:27.350Z,1492152447.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:27.379Z,1492152447.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:27.776Z,1492152447.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:27.817Z,1492152447.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:28.161Z,1492152448.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:28.192Z,1492152448.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:28.199Z,1492152448.199 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:28.199Z,1492152448.200 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:47:28.200Z,1492152448.200 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:47:28.214Z,1492152448.214 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:47:28.545Z,1492152448.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:28.566Z,1492152448.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:28.717Z,1492152448.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:47:28.717Z,1492152448.717 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:47:28.947Z,1492152448.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:28.998Z,1492152448.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:29.008Z,1492152449.008 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:47:29.009Z,1492152449.009 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:47:29.009Z,1492152449.009 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:47:29.352Z,1492152449.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:29.393Z,1492152449.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:29.756Z,1492152449.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:29.774Z,1492152449.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:30.151Z,1492152450.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:30.167Z,1492152450.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:30.553Z,1492152450.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:30.610Z,1492152450.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:31.007Z,1492152451.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:31.072Z,1492152451.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:31.350Z,1492152451.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:31.394Z,1492152451.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:31.765Z,1492152451.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:31.798Z,1492152451.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:32.157Z,1492152452.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:32.204Z,1492152452.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:32.554Z,1492152452.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:32.603Z,1492152452.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:33.004Z,1492152453.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:33.023Z,1492152453.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:33.353Z,1492152453.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:33.384Z,1492152453.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:33.757Z,1492152453.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:33.822Z,1492152453.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:34.158Z,1492152454.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:34.178Z,1492152454.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:34.608Z,1492152454.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:34.686Z,1492152454.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:35.038Z,1492152455.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:35.202Z,1492152455.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:35.356Z,1492152455.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:35.418Z,1492152455.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:35.751Z,1492152455.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:35.791Z,1492152455.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:36.147Z,1492152456.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:36.218Z,1492152456.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:36.574Z,1492152456.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:36.738Z,1492152456.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:36.998Z,1492152456.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:37.094Z,1492152457.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:37.363Z,1492152457.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:37.432Z,1492152457.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:37.766Z,1492152457.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:37.783Z,1492152457.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:38.247Z,1492152458.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:38.329Z,1492152458.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:38.684Z,1492152458.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:38.733Z,1492152458.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:38.960Z,1492152458.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:39.006Z,1492152459.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:39.384Z,1492152459.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:39.488Z,1492152459.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:39.758Z,1492152459.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:39.804Z,1492152459.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:40.167Z,1492152460.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:40.183Z,1492152460.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:40.629Z,1492152460.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:40.681Z,1492152460.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:40.967Z,1492152460.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:41.088Z,1492152461.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:41.396Z,1492152461.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:41.438Z,1492152461.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:41.761Z,1492152461.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:41.791Z,1492152461.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:42.158Z,1492152462.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:42.191Z,1492152462.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:42.565Z,1492152462.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:42.693Z,1492152462.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:42.964Z,1492152462.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:42.996Z,1492152462.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:43.357Z,1492152463.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:43.373Z,1492152463.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:43.762Z,1492152463.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:43.782Z,1492152463.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:44.161Z,1492152464.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:44.182Z,1492152464.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:44.569Z,1492152464.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:44.614Z,1492152464.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:44.971Z,1492152464.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:45.027Z,1492152465.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:45.373Z,1492152465.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:45.414Z,1492152465.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:45.785Z,1492152465.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:45.825Z,1492152465.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:46.177Z,1492152466.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:46.237Z,1492152466.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:46.562Z,1492152466.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:46.591Z,1492152466.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:46.960Z,1492152466.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:47.046Z,1492152467.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:47.384Z,1492152467.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:47.451Z,1492152467.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:47.770Z,1492152467.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:47.794Z,1492152467.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:48.165Z,1492152468.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:48.181Z,1492152468.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:48.615Z,1492152468.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:48.646Z,1492152468.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:48.972Z,1492152468.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:49.001Z,1492152469.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:49.357Z,1492152469.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:49.414Z,1492152469.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:49.761Z,1492152469.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:49.797Z,1492152469.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:50.157Z,1492152470.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:50.189Z,1492152470.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:50.626Z,1492152470.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:50.675Z,1492152470.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:50.968Z,1492152470.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:50.984Z,1492152470.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:51.371Z,1492152471.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:51.387Z,1492152471.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:51.768Z,1492152471.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:51.784Z,1492152471.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:52.165Z,1492152472.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:52.181Z,1492152472.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:52.603Z,1492152472.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:52.633Z,1492152472.633 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:47:52.633Z,1492152472.633 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:47:52.633Z,1492152472.633 [BPC1](ERROR): Communications Fault
2017-04-14T06:47:52.677Z,1492152472.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:52.726Z,1492152472.726 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:47:52.957Z,1492152472.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:52.988Z,1492152472.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:53.357Z,1492152473.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:53.391Z,1492152473.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:53.775Z,1492152473.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:53.790Z,1492152473.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:53.810Z,1492152473.810 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:47:53.810Z,1492152473.810 [BPC1] No Fault, FailCount= 1
2017-04-14T06:47:54.162Z,1492152474.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:54.252Z,1492152474.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:54.600Z,1492152474.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:54.677Z,1492152474.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:54.961Z,1492152474.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:54.991Z,1492152474.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:55.357Z,1492152475.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:55.396Z,1492152475.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:55.757Z,1492152475.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:55.794Z,1492152475.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:56.165Z,1492152476.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:56.193Z,1492152476.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:56.598Z,1492152476.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:56.674Z,1492152476.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:56.965Z,1492152476.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:56.983Z,1492152476.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:57.366Z,1492152477.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:57.387Z,1492152477.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:57.766Z,1492152477.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:57.783Z,1492152477.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:58.166Z,1492152478.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:58.182Z,1492152478.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:58.570Z,1492152478.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:58.586Z,1492152478.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:58.965Z,1492152478.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:58.984Z,1492152478.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:59.360Z,1492152479.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:59.392Z,1492152479.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:47:59.757Z,1492152479.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:47:59.817Z,1492152479.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:00.161Z,1492152480.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:00.189Z,1492152480.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:00.577Z,1492152480.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:00.618Z,1492152480.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:00.965Z,1492152480.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:01.025Z,1492152481.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:01.365Z,1492152481.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:01.418Z,1492152481.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:04.951Z,1492152484.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:05.003Z,1492152485.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:05.109Z,1492152485.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:05.208Z,1492152485.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:05.461Z,1492152485.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:05.476Z,1492152485.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:05.869Z,1492152485.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:05.891Z,1492152485.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:06.270Z,1492152486.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:06.286Z,1492152486.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:06.669Z,1492152486.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:06.690Z,1492152486.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:07.084Z,1492152487.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:07.102Z,1492152487.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:07.484Z,1492152487.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:07.502Z,1492152487.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:07.861Z,1492152487.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:07.906Z,1492152487.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:08.279Z,1492152488.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:08.310Z,1492152488.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:08.662Z,1492152488.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:08.694Z,1492152488.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:09.066Z,1492152489.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:09.081Z,1492152489.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:09.472Z,1492152489.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:09.488Z,1492152489.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:09.860Z,1492152489.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:09.912Z,1492152489.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:10.266Z,1492152490.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:10.286Z,1492152490.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:10.672Z,1492152490.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:10.694Z,1492152490.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:11.070Z,1492152491.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:11.086Z,1492152491.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:11.457Z,1492152491.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:11.494Z,1492152491.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:11.871Z,1492152491.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:11.887Z,1492152491.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:12.274Z,1492152492.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:12.290Z,1492152492.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:12.675Z,1492152492.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:12.692Z,1492152492.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:13.057Z,1492152493.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:13.093Z,1492152493.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:13.457Z,1492152493.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:13.495Z,1492152493.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:13.873Z,1492152493.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:13.890Z,1492152493.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:14.269Z,1492152494.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:14.339Z,1492152494.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:14.665Z,1492152494.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:14.704Z,1492152494.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:15.069Z,1492152495.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:15.088Z,1492152495.088 [BPC1](ERROR): Failed to parse message.
2017-04-14T06:48:15.088Z,1492152495.088 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:48:15.089Z,1492152495.089 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:48:15.089Z,1492152495.089 [BPC1](ERROR): Data Fault
2017-04-14T06:48:15.103Z,1492152495.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:15.122Z,1492152495.122 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:48:15.465Z,1492152495.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:15.512Z,1492152495.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:15.865Z,1492152495.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:15.897Z,1492152495.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:16.264Z,1492152496.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:16.308Z,1492152496.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:16.351Z,1492152496.351 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:48:16.352Z,1492152496.352 [BPC1] No Fault, FailCount= 1
2017-04-14T06:48:16.663Z,1492152496.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:16.750Z,1492152496.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:17.065Z,1492152497.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:17.125Z,1492152497.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:17.457Z,1492152497.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:17.472Z,1492152497.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:17.865Z,1492152497.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:17.886Z,1492152497.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:18.268Z,1492152498.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:18.284Z,1492152498.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:18.657Z,1492152498.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:18.691Z,1492152498.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:19.061Z,1492152499.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:19.094Z,1492152499.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:19.457Z,1492152499.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:19.489Z,1492152499.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:19.861Z,1492152499.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:19.897Z,1492152499.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:20.256Z,1492152500.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:20.272Z,1492152500.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:20.675Z,1492152500.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:20.718Z,1492152500.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:21.073Z,1492152501.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:21.108Z,1492152501.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:21.458Z,1492152501.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:21.473Z,1492152501.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:21.898Z,1492152501.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:21.918Z,1492152501.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:22.269Z,1492152502.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:22.284Z,1492152502.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:22.664Z,1492152502.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:22.679Z,1492152502.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:23.066Z,1492152503.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:23.086Z,1492152503.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:23.466Z,1492152503.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:23.482Z,1492152503.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:23.865Z,1492152503.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:23.886Z,1492152503.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:24.269Z,1492152504.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:24.285Z,1492152504.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:24.667Z,1492152504.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:24.727Z,1492152504.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:25.064Z,1492152505.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:25.144Z,1492152505.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:25.469Z,1492152505.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:25.532Z,1492152505.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:25.857Z,1492152505.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:25.894Z,1492152505.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:26.261Z,1492152506.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:26.308Z,1492152506.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:26.657Z,1492152506.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:26.704Z,1492152506.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:27.057Z,1492152507.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:27.111Z,1492152507.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:27.492Z,1492152507.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:27.594Z,1492152507.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:27.868Z,1492152507.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:27.950Z,1492152507.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:28.289Z,1492152508.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:28.338Z,1492152508.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:28.680Z,1492152508.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:28.728Z,1492152508.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:29.135Z,1492152509.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:29.188Z,1492152509.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:29.497Z,1492152509.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:29.571Z,1492152509.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:29.879Z,1492152509.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:29.950Z,1492152509.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:30.285Z,1492152510.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:30.369Z,1492152510.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:30.684Z,1492152510.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:30.757Z,1492152510.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:31.059Z,1492152511.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:31.110Z,1492152511.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:31.457Z,1492152511.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:31.505Z,1492152511.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:31.861Z,1492152511.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:31.898Z,1492152511.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:32.252Z,1492152512.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:32.268Z,1492152512.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:32.663Z,1492152512.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:32.679Z,1492152512.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:33.058Z,1492152513.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:33.090Z,1492152513.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:33.458Z,1492152513.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:33.473Z,1492152513.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:33.866Z,1492152513.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:33.902Z,1492152513.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:34.261Z,1492152514.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:34.277Z,1492152514.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:34.657Z,1492152514.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:34.673Z,1492152514.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:35.065Z,1492152515.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:35.105Z,1492152515.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:35.469Z,1492152515.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:35.510Z,1492152515.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:35.859Z,1492152515.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:35.874Z,1492152515.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:36.265Z,1492152516.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:36.284Z,1492152516.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:36.665Z,1492152516.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:36.687Z,1492152516.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:37.073Z,1492152517.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:37.095Z,1492152517.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:37.480Z,1492152517.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:37.518Z,1492152517.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:37.859Z,1492152517.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:37.891Z,1492152517.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:38.257Z,1492152518.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:38.293Z,1492152518.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:38.734Z,1492152518.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:38.814Z,1492152518.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:39.067Z,1492152519.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:39.085Z,1492152519.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:39.466Z,1492152519.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:39.482Z,1492152519.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:39.907Z,1492152519.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:39.942Z,1492152519.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:40.266Z,1492152520.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:40.289Z,1492152520.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:40.660Z,1492152520.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:40.743Z,1492152520.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:41.057Z,1492152521.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:41.075Z,1492152521.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:41.479Z,1492152521.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:41.538Z,1492152521.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:41.866Z,1492152521.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:41.906Z,1492152521.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:42.268Z,1492152522.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:42.284Z,1492152522.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:42.665Z,1492152522.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:42.718Z,1492152522.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:43.057Z,1492152523.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:43.110Z,1492152523.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:43.461Z,1492152523.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:43.490Z,1492152523.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:43.863Z,1492152523.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:43.899Z,1492152523.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:44.258Z,1492152524.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:44.294Z,1492152524.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:44.665Z,1492152524.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:44.692Z,1492152524.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:45.062Z,1492152525.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:45.089Z,1492152525.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:45.457Z,1492152525.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:45.494Z,1492152525.494 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:45.494Z,1492152525.494 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:48:45.494Z,1492152525.494 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:48:45.500Z,1492152525.500 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:45.500Z,1492152525.500 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:48:45.500Z,1492152525.500 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:48:45.518Z,1492152525.519 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:48:45.519Z,1492152525.519 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:48:45.865Z,1492152525.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:45.912Z,1492152525.912 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:48:45.912Z,1492152525.912 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:48:45.913Z,1492152525.913 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:48:45.913Z,1492152525.913 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:48:46.264Z,1492152526.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:46.286Z,1492152526.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:48:46.287Z,1492152526.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:48:46.287Z,1492152526.287 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:48:46.305Z,1492152526.305 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:48:46.305Z,1492152526.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:48:46.305Z,1492152526.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:48:46.664Z,1492152526.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:46.680Z,1492152526.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:47.076Z,1492152527.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:47.113Z,1492152527.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:47.472Z,1492152527.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:47.553Z,1492152527.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:47.866Z,1492152527.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:47.881Z,1492152527.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:48.268Z,1492152528.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:48.290Z,1492152528.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:48.666Z,1492152528.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:48.690Z,1492152528.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:49.070Z,1492152529.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:49.090Z,1492152529.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:49.463Z,1492152529.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:49.479Z,1492152529.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:49.865Z,1492152529.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:49.888Z,1492152529.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:50.273Z,1492152530.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:50.292Z,1492152530.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:50.659Z,1492152530.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:50.703Z,1492152530.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:51.065Z,1492152531.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:51.118Z,1492152531.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:51.463Z,1492152531.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:51.479Z,1492152531.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:51.865Z,1492152531.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:51.886Z,1492152531.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:52.266Z,1492152532.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:52.286Z,1492152532.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:52.665Z,1492152532.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:52.680Z,1492152532.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:53.070Z,1492152533.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:53.089Z,1492152533.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:53.468Z,1492152533.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:53.484Z,1492152533.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:53.864Z,1492152533.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:53.915Z,1492152533.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:54.259Z,1492152534.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:54.334Z,1492152534.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:54.680Z,1492152534.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:54.708Z,1492152534.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:55.058Z,1492152535.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:55.074Z,1492152535.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:55.466Z,1492152535.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:55.482Z,1492152535.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:55.896Z,1492152535.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:55.939Z,1492152535.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:56.265Z,1492152536.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:56.286Z,1492152536.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:56.665Z,1492152536.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:56.724Z,1492152536.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:57.059Z,1492152537.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:57.116Z,1492152537.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:57.462Z,1492152537.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:57.482Z,1492152537.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:57.857Z,1492152537.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:57.873Z,1492152537.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:58.262Z,1492152538.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:58.278Z,1492152538.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:58.665Z,1492152538.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:58.686Z,1492152538.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:59.073Z,1492152539.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:59.089Z,1492152539.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:59.464Z,1492152539.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:59.480Z,1492152539.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:48:59.865Z,1492152539.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:48:59.880Z,1492152539.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:00.267Z,1492152540.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:00.284Z,1492152540.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:00.672Z,1492152540.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:00.687Z,1492152540.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:01.073Z,1492152541.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:01.090Z,1492152541.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:01.465Z,1492152541.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:01.481Z,1492152541.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:05.234Z,1492152545.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:05.252Z,1492152545.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:05.369Z,1492152545.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:05.397Z,1492152545.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:05.757Z,1492152545.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:05.784Z,1492152545.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:06.161Z,1492152546.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:06.182Z,1492152546.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:06.569Z,1492152546.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:06.610Z,1492152546.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:06.938Z,1492152546.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:06.988Z,1492152546.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:07.342Z,1492152547.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:07.416Z,1492152547.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:07.756Z,1492152547.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:07.814Z,1492152547.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:08.145Z,1492152548.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:08.199Z,1492152548.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:08.538Z,1492152548.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:08.581Z,1492152548.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:08.948Z,1492152548.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:09.030Z,1492152549.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:09.351Z,1492152549.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:09.406Z,1492152549.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:09.751Z,1492152549.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:09.792Z,1492152549.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:10.193Z,1492152550.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:10.242Z,1492152550.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:10.555Z,1492152550.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:10.614Z,1492152550.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:10.942Z,1492152550.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:10.990Z,1492152550.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:11.376Z,1492152551.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:11.393Z,1492152551.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:11.750Z,1492152551.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:11.778Z,1492152551.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:12.150Z,1492152552.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:12.176Z,1492152552.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:12.548Z,1492152552.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:12.579Z,1492152552.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:12.949Z,1492152552.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:12.980Z,1492152552.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:13.348Z,1492152553.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:13.379Z,1492152553.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:13.750Z,1492152553.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:13.776Z,1492152553.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:14.149Z,1492152554.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:14.180Z,1492152554.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:14.542Z,1492152554.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:14.584Z,1492152554.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:14.950Z,1492152554.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:14.978Z,1492152554.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:15.356Z,1492152555.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:15.379Z,1492152555.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:15.741Z,1492152555.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:15.783Z,1492152555.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:16.145Z,1492152556.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:16.184Z,1492152556.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:16.554Z,1492152556.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:16.585Z,1492152556.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:16.949Z,1492152556.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:16.986Z,1492152556.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:17.353Z,1492152557.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:17.385Z,1492152557.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:17.745Z,1492152557.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:17.762Z,1492152557.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:18.150Z,1492152558.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:18.169Z,1492152558.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:18.547Z,1492152558.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:18.565Z,1492152558.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:18.956Z,1492152558.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:18.972Z,1492152558.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:19.337Z,1492152559.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:19.366Z,1492152559.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:19.761Z,1492152559.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:19.777Z,1492152559.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:20.178Z,1492152560.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:20.233Z,1492152560.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:20.539Z,1492152560.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:20.611Z,1492152560.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:20.937Z,1492152560.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:20.998Z,1492152560.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:21.344Z,1492152561.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:21.376Z,1492152561.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:21.738Z,1492152561.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:21.814Z,1492152561.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:22.139Z,1492152562.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:22.172Z,1492152562.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:22.539Z,1492152562.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:22.604Z,1492152562.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:22.944Z,1492152562.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:23.001Z,1492152563.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:23.338Z,1492152563.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:23.413Z,1492152563.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:23.739Z,1492152563.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:23.818Z,1492152563.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:24.138Z,1492152564.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:24.175Z,1492152564.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:24.548Z,1492152564.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:24.579Z,1492152564.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:24.949Z,1492152564.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:25.038Z,1492152565.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:25.342Z,1492152565.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:25.358Z,1492152565.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:25.746Z,1492152565.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:25.794Z,1492152565.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:26.150Z,1492152566.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:26.173Z,1492152566.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:26.544Z,1492152566.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:26.562Z,1492152566.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:26.950Z,1492152566.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:26.972Z,1492152566.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:27.350Z,1492152567.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:27.368Z,1492152567.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:27.746Z,1492152567.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:27.766Z,1492152567.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:28.148Z,1492152568.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:28.166Z,1492152568.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:28.546Z,1492152568.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:28.563Z,1492152568.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:28.942Z,1492152568.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:28.960Z,1492152568.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:29.345Z,1492152569.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:29.363Z,1492152569.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:29.744Z,1492152569.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:29.770Z,1492152569.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:30.145Z,1492152570.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:30.170Z,1492152570.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:30.546Z,1492152570.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:30.564Z,1492152570.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:30.953Z,1492152570.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:30.977Z,1492152570.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:31.354Z,1492152571.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:31.415Z,1492152571.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:31.743Z,1492152571.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:31.782Z,1492152571.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:32.137Z,1492152572.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:32.176Z,1492152572.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:32.540Z,1492152572.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:32.582Z,1492152572.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:32.941Z,1492152572.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:32.987Z,1492152572.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:33.358Z,1492152573.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:33.428Z,1492152573.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:33.743Z,1492152573.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:33.798Z,1492152573.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:34.142Z,1492152574.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:34.178Z,1492152574.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:34.553Z,1492152574.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:34.609Z,1492152574.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:34.945Z,1492152574.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:34.999Z,1492152574.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:35.342Z,1492152575.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:35.376Z,1492152575.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:35.754Z,1492152575.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:35.834Z,1492152575.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:36.160Z,1492152576.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:36.185Z,1492152576.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:36.539Z,1492152576.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:36.589Z,1492152576.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:36.947Z,1492152576.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:37.032Z,1492152577.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:37.342Z,1492152577.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:37.396Z,1492152577.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:37.745Z,1492152577.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:37.766Z,1492152577.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:38.146Z,1492152578.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:38.167Z,1492152578.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:38.547Z,1492152578.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:38.571Z,1492152578.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:38.945Z,1492152578.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:38.963Z,1492152578.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:39.354Z,1492152579.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:39.372Z,1492152579.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:39.734Z,1492152579.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:39.777Z,1492152579.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:40.150Z,1492152580.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:40.190Z,1492152580.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:40.594Z,1492152580.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:40.647Z,1492152580.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:40.941Z,1492152580.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:40.979Z,1492152580.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:41.338Z,1492152581.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:41.376Z,1492152581.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:41.749Z,1492152581.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:41.836Z,1492152581.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:42.144Z,1492152582.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:42.215Z,1492152582.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:42.550Z,1492152582.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:42.588Z,1492152582.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:42.957Z,1492152582.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:43.006Z,1492152583.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:43.350Z,1492152583.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:43.372Z,1492152583.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:43.755Z,1492152583.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:43.771Z,1492152583.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:44.149Z,1492152584.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:44.178Z,1492152584.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:44.558Z,1492152584.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:44.621Z,1492152584.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:44.937Z,1492152584.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:44.983Z,1492152584.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:45.345Z,1492152585.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:45.386Z,1492152585.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:45.738Z,1492152585.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:45.783Z,1492152585.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:46.137Z,1492152586.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:46.179Z,1492152586.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:46.566Z,1492152586.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:46.582Z,1492152586.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:46.960Z,1492152586.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:46.993Z,1492152586.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:47.351Z,1492152587.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:47.442Z,1492152587.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:47.741Z,1492152587.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:47.778Z,1492152587.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:48.146Z,1492152588.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:48.231Z,1492152588.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:48.542Z,1492152588.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:48.607Z,1492152588.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:48.950Z,1492152588.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:49.006Z,1492152589.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:49.345Z,1492152589.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:49.362Z,1492152589.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:49.737Z,1492152589.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:49.818Z,1492152589.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:50.138Z,1492152590.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:50.190Z,1492152590.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:50.541Z,1492152590.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:50.577Z,1492152590.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:50.937Z,1492152590.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:50.978Z,1492152590.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:51.341Z,1492152591.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:51.374Z,1492152591.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:51.741Z,1492152591.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:51.758Z,1492152591.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:52.142Z,1492152592.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:52.162Z,1492152592.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:52.546Z,1492152592.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:52.564Z,1492152592.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:52.970Z,1492152592.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:52.994Z,1492152592.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:53.345Z,1492152593.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:53.382Z,1492152593.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:53.742Z,1492152593.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:53.794Z,1492152593.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:54.145Z,1492152594.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:54.186Z,1492152594.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:54.542Z,1492152594.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:54.562Z,1492152594.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:54.945Z,1492152594.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:54.984Z,1492152594.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:55.345Z,1492152595.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:55.362Z,1492152595.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:55.742Z,1492152595.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:55.760Z,1492152595.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:56.145Z,1492152596.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:56.174Z,1492152596.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:56.545Z,1492152596.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:56.578Z,1492152596.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:56.950Z,1492152596.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:56.998Z,1492152596.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:57.359Z,1492152597.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:57.375Z,1492152597.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:57.741Z,1492152597.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:57.777Z,1492152597.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:58.146Z,1492152598.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:58.219Z,1492152598.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:58.537Z,1492152598.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:58.638Z,1492152598.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:58.945Z,1492152598.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:58.986Z,1492152598.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:59.342Z,1492152599.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:59.384Z,1492152599.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:49:59.745Z,1492152599.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:49:59.780Z,1492152599.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:00.151Z,1492152600.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:00.178Z,1492152600.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:00.543Z,1492152600.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:00.598Z,1492152600.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:00.945Z,1492152600.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:01.003Z,1492152601.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:01.345Z,1492152601.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:01.363Z,1492152601.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:01.740Z,1492152601.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:01.759Z,1492152601.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:05.399Z,1492152605.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:05.488Z,1492152605.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:05.640Z,1492152605.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:05.673Z,1492152605.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:06.006Z,1492152606.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:06.094Z,1492152606.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:06.419Z,1492152606.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:06.510Z,1492152606.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:06.813Z,1492152606.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:06.833Z,1492152606.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:07.192Z,1492152607.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:07.244Z,1492152607.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:07.595Z,1492152607.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:07.648Z,1492152607.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:07.997Z,1492152607.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:08.056Z,1492152608.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:08.407Z,1492152608.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:08.463Z,1492152608.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:08.800Z,1492152608.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:08.873Z,1492152608.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:09.185Z,1492152609.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:09.215Z,1492152609.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:09.606Z,1492152609.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:09.622Z,1492152609.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:09.985Z,1492152609.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:10.021Z,1492152610.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:10.395Z,1492152610.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:10.444Z,1492152610.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:10.802Z,1492152610.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:10.826Z,1492152610.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:11.193Z,1492152611.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:11.228Z,1492152611.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:11.595Z,1492152611.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:11.619Z,1492152611.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:11.991Z,1492152611.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:12.007Z,1492152612.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:12.397Z,1492152612.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:12.456Z,1492152612.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:12.797Z,1492152612.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:12.818Z,1492152612.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:13.202Z,1492152613.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:13.219Z,1492152613.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:13.601Z,1492152613.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:13.623Z,1492152613.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:14.002Z,1492152614.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:14.018Z,1492152614.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:14.404Z,1492152614.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:14.459Z,1492152614.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:14.785Z,1492152614.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:14.814Z,1492152614.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:15.185Z,1492152615.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:15.220Z,1492152615.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:15.609Z,1492152615.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:15.626Z,1492152615.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:16.007Z,1492152616.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:16.024Z,1492152616.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:16.460Z,1492152616.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:16.524Z,1492152616.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:16.793Z,1492152616.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:16.850Z,1492152616.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:17.197Z,1492152617.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:17.297Z,1492152617.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:17.595Z,1492152617.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:17.637Z,1492152617.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:18.021Z,1492152618.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:18.074Z,1492152618.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:18.417Z,1492152618.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:18.436Z,1492152618.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:18.814Z,1492152618.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:18.886Z,1492152618.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:19.188Z,1492152619.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:19.243Z,1492152619.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:19.599Z,1492152619.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:19.654Z,1492152619.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:19.989Z,1492152619.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:20.030Z,1492152620.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:20.397Z,1492152620.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:20.429Z,1492152620.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:20.793Z,1492152620.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:20.835Z,1492152620.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:21.220Z,1492152621.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:21.245Z,1492152621.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:21.599Z,1492152621.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:21.621Z,1492152621.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:22.036Z,1492152622.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:22.069Z,1492152622.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:22.393Z,1492152622.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:22.449Z,1492152622.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:22.795Z,1492152622.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:22.852Z,1492152622.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:23.197Z,1492152623.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:23.216Z,1492152623.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:23.595Z,1492152623.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:23.647Z,1492152623.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:24.001Z,1492152624.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:24.023Z,1492152624.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:24.406Z,1492152624.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:24.468Z,1492152624.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:24.785Z,1492152624.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:24.903Z,1492152624.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:25.249Z,1492152625.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:25.336Z,1492152625.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:25.603Z,1492152625.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:25.651Z,1492152625.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:26.020Z,1492152626.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:26.079Z,1492152626.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:26.424Z,1492152626.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:26.489Z,1492152626.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:26.796Z,1492152626.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:26.842Z,1492152626.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:27.198Z,1492152627.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:27.245Z,1492152627.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:27.613Z,1492152627.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:27.637Z,1492152627.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:28.002Z,1492152628.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:28.036Z,1492152628.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:28.387Z,1492152628.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:28.457Z,1492152628.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:28.785Z,1492152628.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:28.830Z,1492152628.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:29.195Z,1492152629.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:29.236Z,1492152629.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:29.242Z,1492152629.242 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:29.242Z,1492152629.242 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:50:29.242Z,1492152629.242 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:50:29.292Z,1492152629.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:50:29.597Z,1492152629.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:29.650Z,1492152629.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:29.704Z,1492152629.704 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:50:29.705Z,1492152629.704 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:50:29.988Z,1492152629.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:30.039Z,1492152630.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:30.045Z,1492152630.045 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:50:30.045Z,1492152630.045 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:50:30.045Z,1492152630.046 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:50:30.442Z,1492152630.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:30.479Z,1492152630.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:30.799Z,1492152630.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:30.832Z,1492152630.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:31.199Z,1492152631.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:31.242Z,1492152631.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:31.601Z,1492152631.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:31.633Z,1492152631.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:31.990Z,1492152631.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:32.048Z,1492152632.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:32.394Z,1492152632.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:32.454Z,1492152632.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:32.805Z,1492152632.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:32.830Z,1492152632.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:33.197Z,1492152633.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:33.242Z,1492152633.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:33.593Z,1492152633.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:33.632Z,1492152633.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:34.001Z,1492152634.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:34.032Z,1492152634.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:34.398Z,1492152634.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:34.434Z,1492152634.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:34.801Z,1492152634.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:34.842Z,1492152634.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:35.191Z,1492152635.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:35.232Z,1492152635.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:35.597Z,1492152635.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:35.626Z,1492152635.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:36.000Z,1492152636.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:36.036Z,1492152636.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:36.393Z,1492152636.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:36.435Z,1492152636.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:36.803Z,1492152636.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:36.810Z,1492152636.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x24542 got:0x31419
2017-04-14T06:50:36.845Z,1492152636.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:37.196Z,1492152637.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:37.237Z,1492152637.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:37.591Z,1492152637.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:37.608Z,1492152637.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:37.992Z,1492152637.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:38.041Z,1492152638.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:38.398Z,1492152638.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:38.415Z,1492152638.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:38.799Z,1492152638.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:38.841Z,1492152638.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:39.205Z,1492152639.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:39.229Z,1492152639.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:39.592Z,1492152639.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:39.637Z,1492152639.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:39.000Z,1492152640.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:40.006Z,1492152640.006 [PNI_TCM](ERROR): CRC does not match. Expected:0x53909 got:0x36891
2017-04-14T06:50:40.049Z,1492152640.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:40.399Z,1492152640.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:40.421Z,1492152640.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:40.805Z,1492152640.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:40.826Z,1492152640.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:41.206Z,1492152641.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:41.223Z,1492152641.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:41.614Z,1492152641.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:41.630Z,1492152641.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:42.008Z,1492152642.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:42.065Z,1492152642.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:42.428Z,1492152642.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:42.466Z,1492152642.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:42.834Z,1492152642.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:42.942Z,1492152642.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:43.196Z,1492152643.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:43.259Z,1492152643.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:43.631Z,1492152643.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:43.656Z,1492152643.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:43.997Z,1492152643.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:44.018Z,1492152644.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:44.432Z,1492152644.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:44.480Z,1492152644.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:44.797Z,1492152644.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:44.826Z,1492152644.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:45.194Z,1492152645.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:45.222Z,1492152645.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:45.589Z,1492152645.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:45.643Z,1492152645.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:46.014Z,1492152646.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:46.038Z,1492152646.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:46.406Z,1492152646.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:46.461Z,1492152646.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:46.842Z,1492152646.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:46.928Z,1492152646.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:47.197Z,1492152647.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:47.214Z,1492152647.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:47.600Z,1492152647.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:47.637Z,1492152647.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:48.023Z,1492152648.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:48.048Z,1492152648.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:48.453Z,1492152648.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:48.481Z,1492152648.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:48.813Z,1492152648.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:48.850Z,1492152648.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:49.210Z,1492152649.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:49.268Z,1492152649.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:49.600Z,1492152649.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:49.623Z,1492152649.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:49.987Z,1492152649.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:50.022Z,1492152650.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:50.476Z,1492152650.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:50.531Z,1492152650.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:50.801Z,1492152650.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:50.820Z,1492152650.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:51.205Z,1492152651.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:51.245Z,1492152651.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:51.601Z,1492152651.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:51.626Z,1492152651.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:52.019Z,1492152652.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:52.044Z,1492152652.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:52.404Z,1492152652.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:52.498Z,1492152652.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:52.803Z,1492152652.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:52.852Z,1492152652.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:53.200Z,1492152653.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:53.220Z,1492152653.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:53.598Z,1492152653.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:53.616Z,1492152653.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:54.030Z,1492152654.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:54.068Z,1492152654.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:54.398Z,1492152654.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:54.419Z,1492152654.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:54.795Z,1492152654.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:54.827Z,1492152654.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:55.237Z,1492152655.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:55.293Z,1492152655.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:55.596Z,1492152655.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:55.613Z,1492152655.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:55.999Z,1492152655.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:56.015Z,1492152656.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:56.403Z,1492152656.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:56.424Z,1492152656.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:56.793Z,1492152656.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:56.809Z,1492152656.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:57.199Z,1492152657.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:57.216Z,1492152657.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:57.592Z,1492152657.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:57.614Z,1492152657.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:58.008Z,1492152658.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:58.050Z,1492152658.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:58.387Z,1492152658.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:58.420Z,1492152658.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:58.801Z,1492152658.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:58.847Z,1492152658.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:59.232Z,1492152659.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:59.291Z,1492152659.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:50:59.599Z,1492152659.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:50:59.643Z,1492152659.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:00.026Z,1492152660.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:00.066Z,1492152660.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:00.396Z,1492152660.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:00.412Z,1492152660.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:00.789Z,1492152660.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:00.858Z,1492152660.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:01.195Z,1492152661.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:01.244Z,1492152661.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:01.252Z,1492152661.252 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:51:01.252Z,1492152661.252 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:51:01.252Z,1492152661.252 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:51:01.252Z,1492152661.252 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:51:01.601Z,1492152661.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:01.617Z,1492152661.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:01.626Z,1492152661.626 [Default:CheckIn:D] Stopped
2017-04-14T06:51:01.626Z,1492152661.626 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:51:02.004Z,1492152662.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:02.021Z,1492152662.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 204.938444 min 
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn:E] Stopped
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn] Stopped
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:51:02.032Z,1492152662.032 [Default:CheckIn](INFO): Running loop #29
2017-04-14T06:51:02.032Z,1492152662.033 [Default:CheckIn] Running Loop=29
2017-04-14T06:51:02.033Z,1492152662.033 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:51:02.033Z,1492152662.033 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:51:06.777Z,1492152666.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:06.794Z,1492152666.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:06.889Z,1492152666.889 [NAL9602](INFO): Powering up
2017-04-14T06:51:06.912Z,1492152666.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:06.939Z,1492152666.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:07.280Z,1492152667.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:07.296Z,1492152667.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:07.675Z,1492152667.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:07.690Z,1492152667.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:08.078Z,1492152668.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:08.094Z,1492152668.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:08.482Z,1492152668.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:08.497Z,1492152668.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:08.885Z,1492152668.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:08.906Z,1492152668.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:09.281Z,1492152669.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:09.297Z,1492152669.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:09.680Z,1492152669.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:09.706Z,1492152669.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:10.079Z,1492152670.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:10.100Z,1492152670.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:10.481Z,1492152670.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:10.502Z,1492152670.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:10.876Z,1492152670.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:10.907Z,1492152670.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:11.275Z,1492152671.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:11.358Z,1492152671.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:11.675Z,1492152671.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:11.752Z,1492152671.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:12.112Z,1492152672.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:12.127Z,1492152672.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:12.570Z,1492152672.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:12.626Z,1492152672.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:12.900Z,1492152672.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:13.014Z,1492152673.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:13.332Z,1492152673.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:13.447Z,1492152673.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:13.677Z,1492152673.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:13.718Z,1492152673.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:14.126Z,1492152674.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:14.205Z,1492152674.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:14.532Z,1492152674.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:14.680Z,1492152674.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:14.958Z,1492152674.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:15.042Z,1492152675.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:15.350Z,1492152675.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:15.390Z,1492152675.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:15.812Z,1492152675.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:15.930Z,1492152675.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:16.125Z,1492152676.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:16.237Z,1492152676.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:16.506Z,1492152676.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:16.607Z,1492152676.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:16.912Z,1492152676.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:16.985Z,1492152676.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:17.321Z,1492152677.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:17.385Z,1492152677.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:17.754Z,1492152677.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:17.837Z,1492152677.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:18.109Z,1492152678.109 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:51:18.139Z,1492152678.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:18.295Z,1492152678.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:18.524Z,1492152678.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:18.621Z,1492152678.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:18.919Z,1492152678.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:18.959Z,1492152678.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:19.321Z,1492152679.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:19.345Z,1492152679.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:19.747Z,1492152679.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:19.777Z,1492152679.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:20.108Z,1492152680.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:20.150Z,1492152680.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:20.513Z,1492152680.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:20.558Z,1492152680.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:20.915Z,1492152680.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:20.962Z,1492152680.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:21.324Z,1492152681.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:21.364Z,1492152681.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:21.713Z,1492152681.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:21.729Z,1492152681.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:22.159Z,1492152682.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:22.241Z,1492152682.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:22.518Z,1492152682.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:22.546Z,1492152682.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:22.922Z,1492152682.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:22.987Z,1492152682.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:23.317Z,1492152683.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:23.344Z,1492152683.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:23.747Z,1492152683.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:23.764Z,1492152683.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:24.166Z,1492152684.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:24.323Z,1492152684.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:24.505Z,1492152684.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:24.549Z,1492152684.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:24.917Z,1492152684.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:24.954Z,1492152684.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:25.313Z,1492152685.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:25.354Z,1492152685.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:25.709Z,1492152685.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:25.767Z,1492152685.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:26.119Z,1492152686.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:26.155Z,1492152686.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:26.522Z,1492152686.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:26.556Z,1492152686.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:26.919Z,1492152686.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:26.981Z,1492152686.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:27.317Z,1492152687.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:27.342Z,1492152687.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:27.730Z,1492152687.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:27.802Z,1492152687.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:28.143Z,1492152688.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:28.198Z,1492152688.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:28.506Z,1492152688.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:28.605Z,1492152688.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:28.906Z,1492152688.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:28.973Z,1492152688.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:29.336Z,1492152689.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:29.355Z,1492152689.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:29.717Z,1492152689.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:29.799Z,1492152689.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:30.113Z,1492152690.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:30.200Z,1492152690.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:30.567Z,1492152690.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:30.637Z,1492152690.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:30.931Z,1492152690.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:30.947Z,1492152690.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:31.306Z,1492152691.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:31.340Z,1492152691.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:31.709Z,1492152691.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:31.754Z,1492152691.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:32.106Z,1492152692.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:32.158Z,1492152692.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:32.521Z,1492152692.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:32.544Z,1492152692.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:32.929Z,1492152692.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:32.947Z,1492152692.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:33.326Z,1492152693.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:33.354Z,1492152693.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:33.731Z,1492152693.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:33.756Z,1492152693.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:34.131Z,1492152694.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:34.162Z,1492152694.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:34.506Z,1492152694.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:34.561Z,1492152694.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:34.915Z,1492152694.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:34.932Z,1492152694.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:35.316Z,1492152695.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:35.338Z,1492152695.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:35.707Z,1492152695.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:35.828Z,1492152695.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:36.090Z,1492152696.090 [NAL9602](INFO): SBD MO Status=0, MOMSN=2122, MT Status=0, MTMSN=0
2017-04-14T06:51:36.090Z,1492152696.090 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:51:36.124Z,1492152696.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:36.162Z,1492152696.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:36.514Z,1492152696.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:36.533Z,1492152696.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:36.936Z,1492152696.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:36.974Z,1492152696.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:37.341Z,1492152697.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:37.362Z,1492152697.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:37.728Z,1492152697.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:37.762Z,1492152697.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:38.114Z,1492152698.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:38.130Z,1492152698.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:38.515Z,1492152698.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:38.544Z,1492152698.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:38.915Z,1492152698.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:38.944Z,1492152698.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:39.332Z,1492152699.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:39.390Z,1492152699.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:39.716Z,1492152699.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:39.746Z,1492152699.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:40.126Z,1492152700.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:40.184Z,1492152700.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:40.555Z,1492152700.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:40.596Z,1492152700.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:40.914Z,1492152700.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:40.958Z,1492152700.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:41.310Z,1492152701.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:41.329Z,1492152701.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:41.710Z,1492152701.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:41.750Z,1492152701.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:42.148Z,1492152702.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:42.411Z,1492152702.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:42.692Z,1492152702.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:42.752Z,1492152702.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:43.074Z,1492152703.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:43.157Z,1492152703.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:43.456Z,1492152703.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:43.515Z,1492152703.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:43.860Z,1492152703.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:43.918Z,1492152703.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:44.242Z,1492152704.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:44.326Z,1492152704.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:44.639Z,1492152704.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:44.728Z,1492152704.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:45.030Z,1492152705.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:45.097Z,1492152705.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:45.424Z,1492152705.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:45.482Z,1492152705.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:45.838Z,1492152705.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:45.892Z,1492152705.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:46.356Z,1492152706.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:46.385Z,1492152706.385 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:46.386Z,1492152706.385 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:51:46.386Z,1492152706.386 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:51:46.392Z,1492152706.392 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:46.392Z,1492152706.392 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:51:46.392Z,1492152706.392 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:51:46.408Z,1492152706.408 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:51:46.408Z,1492152706.408 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:51:46.646Z,1492152706.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:46.760Z,1492152706.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:51:46.760Z,1492152706.760 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:51:46.761Z,1492152706.761 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:51:46.761Z,1492152706.761 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:51:47.025Z,1492152707.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:47.059Z,1492152707.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:51:47.064Z,1492152707.063 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:51:47.064Z,1492152707.064 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:51:47.072Z,1492152707.072 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:51:47.073Z,1492152707.073 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:51:47.073Z,1492152707.073 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:51:47.435Z,1492152707.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:47.504Z,1492152707.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:47.844Z,1492152707.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:47.892Z,1492152707.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:48.262Z,1492152708.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:48.321Z,1492152708.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:48.641Z,1492152708.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:48.692Z,1492152708.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:49.042Z,1492152709.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:49.059Z,1492152709.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:49.450Z,1492152709.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:49.491Z,1492152709.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:49.837Z,1492152709.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:49.854Z,1492152709.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:50.267Z,1492152710.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:50.344Z,1492152710.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:50.625Z,1492152710.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:50.662Z,1492152710.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:51.030Z,1492152711.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:51.076Z,1492152711.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:51.409Z,1492152711.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:51.444Z,1492152711.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:51.484Z,1492152711.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:51.865Z,1492152711.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:51.927Z,1492152711.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:52.206Z,1492152712.206 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:52.275Z,1492152712.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:52.345Z,1492152712.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:52.628Z,1492152712.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:52.650Z,1492152712.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:52.692Z,1492152712.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:53.051Z,1492152713.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:53.117Z,1492152713.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:53.422Z,1492152713.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:53.424Z,1492152713.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:53.468Z,1492152713.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:53.846Z,1492152713.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:53.920Z,1492152713.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:54.221Z,1492152714.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:54.290Z,1492152714.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:54.355Z,1492152714.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:54.645Z,1492152714.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:54.678Z,1492152714.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:54.728Z,1492152714.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:55.048Z,1492152715.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:55.131Z,1492152715.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:55.441Z,1492152715.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:55.472Z,1492152715.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:55.524Z,1492152715.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:55.823Z,1492152715.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:55.908Z,1492152715.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:56.221Z,1492152716.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:56.260Z,1492152716.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:56.320Z,1492152716.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:56.623Z,1492152716.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:56.725Z,1492152716.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:56.960Z,1492152716.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:57.039Z,1492152717.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:57.118Z,1492152717.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:57.434Z,1492152717.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:57.494Z,1492152717.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:57.756Z,1492152717.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:57.841Z,1492152717.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:57.863Z,1492152717.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:58.245Z,1492152718.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:58.291Z,1492152718.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:58.552Z,1492152718.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:58.642Z,1492152718.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:58.706Z,1492152718.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:58.956Z,1492152718.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:59.021Z,1492152719.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:59.070Z,1492152719.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:59.425Z,1492152719.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:59.452Z,1492152719.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:51:59.752Z,1492152719.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:59.832Z,1492152719.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:51:59.860Z,1492152719.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:00.224Z,1492152720.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:00.271Z,1492152720.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:00.550Z,1492152720.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:00.661Z,1492152720.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:00.677Z,1492152720.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:00.956Z,1492152720.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:01.017Z,1492152721.017 [NAL9602](INFO): GPS fix at 20170414T065219: (36.802349, -121.787107)
2017-04-14T06:52:01.035Z,1492152721.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:01.114Z,1492152721.114 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:52:01.114Z,1492152721.114 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:52:01.444Z,1492152721.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:01.478Z,1492152721.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:01.479Z,1492152721.478 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:52:01.479Z,1492152721.478 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:52:01.494Z,1492152721.494 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:01.494Z,1492152721.494 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:52:01.494Z,1492152721.494 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:52:01.522Z,1492152721.522 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:52:01.522Z,1492152721.523 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:52:01.834Z,1492152721.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:01.905Z,1492152721.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:52:01.905Z,1492152721.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:52:01.906Z,1492152721.906 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:52:01.906Z,1492152721.906 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:52:02.233Z,1492152722.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:02.279Z,1492152722.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:52:02.280Z,1492152722.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:52:02.280Z,1492152722.280 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:52:02.285Z,1492152722.285 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:52:02.286Z,1492152722.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:52:02.286Z,1492152722.286 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:52:05.772Z,1492152725.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:06.568Z,1492152726.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:06.695Z,1492152726.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:06.712Z,1492152726.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:06.863Z,1492152726.863 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0120.lzma
2017-04-14T06:52:06.900Z,1492152726.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:06.938Z,1492152726.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:06.972Z,1492152726.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:07.234Z,1492152727.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:07.251Z,1492152727.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:07.578Z,1492152727.578 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0120.lzma.bak
2017-04-14T06:52:07.578Z,1492152727.578 [DataOverHttps](INFO): SBD MOMSN=4885382
2017-04-14T06:52:07.626Z,1492152727.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:07.652Z,1492152727.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:07.768Z,1492152727.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:08.071Z,1492152728.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:08.098Z,1492152728.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:08.405Z,1492152728.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:08.442Z,1492152728.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:08.565Z,1492152728.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:08.972Z,1492152728.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:09.768Z,1492152729.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:10.566Z,1492152730.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:10.972Z,1492152730.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:11.768Z,1492152731.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:11.987Z,1492152731.987 [NAL9602](INFO): Powering down
2017-04-14T06:52:12.008Z,1492152732.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:12.095Z,1492152732.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:12.192Z,1492152732.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:12.238Z,1492152732.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:12.565Z,1492152732.565 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:12.588Z,1492152732.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:12.656Z,1492152732.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:12.970Z,1492152732.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:12.988Z,1492152732.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:13.003Z,1492152733.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:13.385Z,1492152733.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:13.446Z,1492152733.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:13.764Z,1492152733.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:13.770Z,1492152733.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:13.824Z,1492152733.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:14.560Z,1492152734.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:14.964Z,1492152734.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:15.760Z,1492152735.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:16.556Z,1492152736.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:16.960Z,1492152736.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:17.764Z,1492152737.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:18.560Z,1492152738.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:18.577Z,1492152738.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:18.654Z,1492152738.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:18.741Z,1492152738.741 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0121.lzma
2017-04-14T06:52:18.797Z,1492152738.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:18.879Z,1492152738.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:18.964Z,1492152738.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:19.180Z,1492152739.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:19.271Z,1492152739.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:19.536Z,1492152739.536 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0121.lzma.bak
2017-04-14T06:52:19.536Z,1492152739.536 [DataOverHttps](INFO): SBD MOMSN=4885385
2017-04-14T06:52:19.590Z,1492152739.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:19.655Z,1492152739.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:19.764Z,1492152739.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:19.994Z,1492152739.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:20.031Z,1492152740.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:20.093Z,1492152740.093 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:52:20.093Z,1492152740.093 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:52:20.093Z,1492152740.093 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:52:20.354Z,1492152740.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:20.371Z,1492152740.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:20.560Z,1492152740.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:20.964Z,1492152740.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:21.760Z,1492152741.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:22.556Z,1492152742.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:22.960Z,1492152742.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:23.758Z,1492152743.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.043Z,1492152744.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.068Z,1492152744.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:24.088Z,1492152744.088 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T06:52:24.175Z,1492152744.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.228Z,1492152744.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:24.539Z,1492152744.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.552Z,1492152744.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.600Z,1492152744.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:24.933Z,1492152744.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.956Z,1492152744.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:24.970Z,1492152744.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:25.337Z,1492152745.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:25.368Z,1492152745.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:25.733Z,1492152745.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:25.756Z,1492152745.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:25.794Z,1492152745.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:26.132Z,1492152746.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:26.192Z,1492152746.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:26.530Z,1492152746.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:26.552Z,1492152746.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:26.583Z,1492152746.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:26.930Z,1492152746.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:26.956Z,1492152746.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:26.989Z,1492152746.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:27.328Z,1492152747.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:27.343Z,1492152747.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:27.729Z,1492152747.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:27.752Z,1492152747.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:27.805Z,1492152747.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:28.185Z,1492152748.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:28.246Z,1492152748.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:28.549Z,1492152748.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:28.564Z,1492152748.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:28.594Z,1492152748.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:28.950Z,1492152748.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:28.952Z,1492152748.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:28.968Z,1492152748.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:29.333Z,1492152749.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:29.360Z,1492152749.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:29.730Z,1492152749.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:29.746Z,1492152749.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:29.748Z,1492152749.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:30.242Z,1492152750.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:30.304Z,1492152750.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:30.524Z,1492152750.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:30.544Z,1492152750.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:30.578Z,1492152750.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:30.956Z,1492152750.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:30.967Z,1492152750.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:31.073Z,1492152751.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:31.347Z,1492152751.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:31.398Z,1492152751.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:31.752Z,1492152751.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:31.780Z,1492152751.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:31.884Z,1492152751.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:32.170Z,1492152752.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:32.250Z,1492152752.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:32.526Z,1492152752.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:32.550Z,1492152752.550 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:32.570Z,1492152752.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:32.923Z,1492152752.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:32.956Z,1492152752.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:32.974Z,1492152752.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:33.329Z,1492152753.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:33.346Z,1492152753.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:33.751Z,1492152753.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:33.752Z,1492152753.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:33.779Z,1492152753.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:34.211Z,1492152754.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:34.244Z,1492152754.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:34.521Z,1492152754.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:34.549Z,1492152754.549 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:34.592Z,1492152754.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:34.926Z,1492152754.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:34.942Z,1492152754.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:34.952Z,1492152754.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:35.333Z,1492152755.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:35.350Z,1492152755.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:35.732Z,1492152755.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:35.748Z,1492152755.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:35.751Z,1492152755.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:36.179Z,1492152756.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:36.230Z,1492152756.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:36.521Z,1492152756.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:36.544Z,1492152756.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:36.564Z,1492152756.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:36.921Z,1492152756.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:36.948Z,1492152756.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:36.966Z,1492152756.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:37.329Z,1492152757.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:37.374Z,1492152757.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:37.733Z,1492152757.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:37.744Z,1492152757.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:37.767Z,1492152757.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:38.134Z,1492152758.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:38.173Z,1492152758.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:38.531Z,1492152758.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:38.540Z,1492152758.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:38.570Z,1492152758.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:38.929Z,1492152758.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:38.944Z,1492152758.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:38.951Z,1492152758.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:39.336Z,1492152759.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:39.353Z,1492152759.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:39.728Z,1492152759.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:39.740Z,1492152759.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:39.749Z,1492152759.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:40.124Z,1492152760.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:40.228Z,1492152760.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:40.524Z,1492152760.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:40.536Z,1492152760.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:40.573Z,1492152760.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:40.925Z,1492152760.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:40.940Z,1492152760.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:40.959Z,1492152760.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:41.345Z,1492152761.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:41.412Z,1492152761.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:41.723Z,1492152761.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:41.736Z,1492152761.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:41.770Z,1492152761.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:42.170Z,1492152762.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:42.258Z,1492152762.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:42.522Z,1492152762.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:42.542Z,1492152762.542 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:42.558Z,1492152762.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:42.921Z,1492152762.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:42.948Z,1492152762.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:42.982Z,1492152762.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:43.329Z,1492152763.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:43.361Z,1492152763.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:43.729Z,1492152763.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:43.744Z,1492152763.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:43.774Z,1492152763.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:44.179Z,1492152764.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:44.226Z,1492152764.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:44.530Z,1492152764.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:44.540Z,1492152764.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:44.559Z,1492152764.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:44.927Z,1492152764.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:44.944Z,1492152764.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:44.960Z,1492152764.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:45.322Z,1492152765.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:45.349Z,1492152765.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:45.719Z,1492152765.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:45.740Z,1492152765.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:45.749Z,1492152765.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:46.160Z,1492152766.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:46.207Z,1492152766.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:46.521Z,1492152766.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:46.528Z,1492152766.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:46.557Z,1492152766.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:46.928Z,1492152766.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:46.961Z,1492152766.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:47.325Z,1492152767.325 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:47.331Z,1492152767.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:47.373Z,1492152767.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:47.732Z,1492152767.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:47.749Z,1492152767.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:48.122Z,1492152768.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:48.168Z,1492152768.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:48.220Z,1492152768.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:48.523Z,1492152768.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:48.544Z,1492152768.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:48.597Z,1492152768.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:48.952Z,1492152768.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:49.022Z,1492152769.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:49.325Z,1492152769.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:49.340Z,1492152769.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:49.417Z,1492152769.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:49.754Z,1492152769.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:49.883Z,1492152769.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:50.137Z,1492152770.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:50.194Z,1492152770.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:50.219Z,1492152770.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:50.533Z,1492152770.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:50.578Z,1492152770.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:50.932Z,1492152770.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:50.986Z,1492152770.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:51.067Z,1492152771.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:51.334Z,1492152771.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:51.348Z,1492152771.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:51.375Z,1492152771.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:51.737Z,1492152771.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:51.785Z,1492152771.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:52.134Z,1492152772.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:52.144Z,1492152772.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:52.151Z,1492152772.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:52.533Z,1492152772.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:52.549Z,1492152772.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:52.864Z,1492152772.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:52.935Z,1492152772.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:52.959Z,1492152772.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:53.325Z,1492152773.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:53.352Z,1492152773.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:53.660Z,1492152773.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:53.733Z,1492152773.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:53.750Z,1492152773.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:54.132Z,1492152774.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:54.160Z,1492152774.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:54.456Z,1492152774.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:54.550Z,1492152774.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:54.566Z,1492152774.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:54.864Z,1492152774.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:54.927Z,1492152774.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:55.018Z,1492152775.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:55.322Z,1492152775.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:55.412Z,1492152775.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:55.660Z,1492152775.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:55.745Z,1492152775.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:55.797Z,1492152775.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:56.155Z,1492152776.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:56.217Z,1492152776.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:56.457Z,1492152776.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:56.545Z,1492152776.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:56.612Z,1492152776.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:56.864Z,1492152776.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:56.932Z,1492152776.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:56.948Z,1492152776.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:57.329Z,1492152777.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:57.386Z,1492152777.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:57.730Z,1492152777.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:57.799Z,1492152777.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:58.180Z,1492152778.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:58.216Z,1492152778.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:58.537Z,1492152778.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:58.578Z,1492152778.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:58.926Z,1492152778.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:58.943Z,1492152778.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:59.333Z,1492152779.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:59.354Z,1492152779.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:52:59.739Z,1492152779.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:52:59.766Z,1492152779.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:00.153Z,1492152780.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:00.249Z,1492152780.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:00.537Z,1492152780.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:00.597Z,1492152780.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:00.929Z,1492152780.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:00.950Z,1492152780.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:01.337Z,1492152781.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:01.365Z,1492152781.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:01.723Z,1492152781.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:01.750Z,1492152781.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:02.136Z,1492152782.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:02.203Z,1492152782.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:02.569Z,1492152782.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:02.614Z,1492152782.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:02.944Z,1492152782.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:02.979Z,1492152782.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:03.323Z,1492152783.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:03.393Z,1492152783.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:03.650Z,1492152783.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:03.727Z,1492152783.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:03.799Z,1492152783.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:04.206Z,1492152784.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:04.286Z,1492152784.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:04.444Z,1492152784.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:04.570Z,1492152784.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:04.609Z,1492152784.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:04.848Z,1492152784.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:04.980Z,1492152784.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:05.033Z,1492152785.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:05.328Z,1492152785.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:05.382Z,1492152785.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:05.644Z,1492152785.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:05.737Z,1492152785.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:05.783Z,1492152785.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:06.134Z,1492152786.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:06.184Z,1492152786.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:06.440Z,1492152786.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:06.530Z,1492152786.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:06.548Z,1492152786.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:06.852Z,1492152786.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:06.921Z,1492152786.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:06.951Z,1492152786.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:07.326Z,1492152787.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:07.403Z,1492152787.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:07.648Z,1492152787.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:07.725Z,1492152787.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:07.781Z,1492152787.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:08.177Z,1492152788.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:08.255Z,1492152788.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:08.444Z,1492152788.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:08.536Z,1492152788.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:08.589Z,1492152788.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:08.860Z,1492152788.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:08.930Z,1492152788.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:08.964Z,1492152788.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:09.355Z,1492152789.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:09.413Z,1492152789.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:09.668Z,1492152789.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:09.733Z,1492152789.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:09.794Z,1492152789.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:10.124Z,1492152790.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:10.205Z,1492152790.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:10.465Z,1492152790.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:10.556Z,1492152790.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:10.588Z,1492152790.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:10.872Z,1492152790.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:10.921Z,1492152790.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:10.997Z,1492152790.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:11.338Z,1492152791.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:11.407Z,1492152791.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:11.668Z,1492152791.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:11.728Z,1492152791.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:11.773Z,1492152791.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:12.129Z,1492152792.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:12.214Z,1492152792.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:12.464Z,1492152792.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:12.545Z,1492152792.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:12.591Z,1492152792.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:12.868Z,1492152792.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:12.924Z,1492152792.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:12.983Z,1492152792.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:13.321Z,1492152793.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:13.374Z,1492152793.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:13.664Z,1492152793.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:13.728Z,1492152793.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:13.769Z,1492152793.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:14.138Z,1492152794.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:14.188Z,1492152794.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:14.460Z,1492152794.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:14.540Z,1492152794.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:14.590Z,1492152794.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:14.864Z,1492152794.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:14.935Z,1492152794.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:14.988Z,1492152794.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:15.349Z,1492152795.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:15.388Z,1492152795.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:15.660Z,1492152795.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:15.738Z,1492152795.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:15.764Z,1492152795.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:16.132Z,1492152796.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:16.196Z,1492152796.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:16.456Z,1492152796.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:16.531Z,1492152796.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:16.570Z,1492152796.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:16.860Z,1492152796.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:16.923Z,1492152796.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:16.968Z,1492152796.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:17.336Z,1492152797.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:17.370Z,1492152797.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:17.656Z,1492152797.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:17.733Z,1492152797.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:17.785Z,1492152797.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:18.205Z,1492152798.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:18.230Z,1492152798.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:18.452Z,1492152798.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:18.540Z,1492152798.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:18.574Z,1492152798.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:18.858Z,1492152798.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:18.940Z,1492152798.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:18.966Z,1492152798.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:19.334Z,1492152799.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:19.391Z,1492152799.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:19.652Z,1492152799.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:19.732Z,1492152799.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:19.751Z,1492152799.750 [PNI_TCM](ERROR): CRC does not match. Expected:0x11858 got:0x16853
2017-04-14T06:53:19.793Z,1492152799.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:20.148Z,1492152800.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:20.189Z,1492152800.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:20.448Z,1492152800.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:20.554Z,1492152800.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:20.583Z,1492152800.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:20.852Z,1492152800.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:24.602Z,1492152804.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:24.690Z,1492152804.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:24.794Z,1492152804.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:24.825Z,1492152804.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:25.178Z,1492152805.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:25.194Z,1492152805.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:25.606Z,1492152805.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:25.715Z,1492152805.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:25.988Z,1492152805.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:26.099Z,1492152806.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:26.374Z,1492152806.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:26.480Z,1492152806.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:26.767Z,1492152806.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:26.813Z,1492152806.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:27.192Z,1492152807.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:27.232Z,1492152807.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:27.569Z,1492152807.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:27.649Z,1492152807.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:28.072Z,1492152808.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:28.159Z,1492152808.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:28.373Z,1492152808.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:28.424Z,1492152808.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:28.778Z,1492152808.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:28.827Z,1492152808.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:29.171Z,1492152809.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:29.188Z,1492152809.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:29.558Z,1492152809.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:29.591Z,1492152809.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:29.978Z,1492152809.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:30.059Z,1492152810.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:30.124Z,1492152810.124 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:30.124Z,1492152810.124 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:53:30.124Z,1492152810.125 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:53:30.172Z,1492152810.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:53:30.361Z,1492152810.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:30.377Z,1492152810.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:30.419Z,1492152810.419 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:53:30.419Z,1492152810.419 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:53:30.765Z,1492152810.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:30.781Z,1492152810.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:30.804Z,1492152810.804 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:53:30.804Z,1492152810.804 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:53:30.804Z,1492152810.804 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:53:31.173Z,1492152811.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:31.208Z,1492152811.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:31.567Z,1492152811.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:31.582Z,1492152811.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:31.969Z,1492152811.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:31.985Z,1492152811.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:32.361Z,1492152812.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:32.389Z,1492152812.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:32.762Z,1492152812.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:32.796Z,1492152812.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:33.161Z,1492152813.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:33.194Z,1492152813.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:33.565Z,1492152813.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:33.594Z,1492152813.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:33.961Z,1492152813.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:33.996Z,1492152813.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:34.411Z,1492152814.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:34.440Z,1492152814.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:34.761Z,1492152814.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:34.784Z,1492152814.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:35.173Z,1492152815.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:35.191Z,1492152815.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:35.565Z,1492152815.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:35.582Z,1492152815.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:35.966Z,1492152815.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:35.982Z,1492152815.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:36.427Z,1492152816.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:36.464Z,1492152816.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:36.761Z,1492152816.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:36.794Z,1492152816.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:37.165Z,1492152817.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:37.173Z,1492152817.173 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T06:53:37.174Z,1492152817.174 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:53:37.174Z,1492152817.174 [BPC1](ERROR): Data Fault
2017-04-14T06:53:37.183Z,1492152817.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:37.231Z,1492152817.231 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:53:37.567Z,1492152817.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:37.582Z,1492152817.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:37.969Z,1492152817.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:38.056Z,1492152818.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:38.374Z,1492152818.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:38.398Z,1492152818.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:38.442Z,1492152818.442 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:53:38.442Z,1492152818.442 [BPC1] No Fault, FailCount= 1
2017-04-14T06:53:38.769Z,1492152818.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:38.839Z,1492152818.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:39.174Z,1492152819.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:39.230Z,1492152819.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:39.561Z,1492152819.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:39.594Z,1492152819.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:39.961Z,1492152819.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:40.057Z,1492152820.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:40.365Z,1492152820.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:40.389Z,1492152820.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:40.771Z,1492152820.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:40.788Z,1492152820.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:41.171Z,1492152821.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:41.186Z,1492152821.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:41.558Z,1492152821.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:41.598Z,1492152821.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:41.983Z,1492152821.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:42.076Z,1492152822.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:42.370Z,1492152822.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:42.387Z,1492152822.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:42.762Z,1492152822.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:42.802Z,1492152822.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:43.161Z,1492152823.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:43.190Z,1492152823.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:43.561Z,1492152823.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:43.597Z,1492152823.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:43.961Z,1492152823.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:44.053Z,1492152824.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:44.365Z,1492152824.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:44.381Z,1492152824.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:44.770Z,1492152824.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:44.786Z,1492152824.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:45.172Z,1492152825.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:45.189Z,1492152825.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:45.569Z,1492152825.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:45.585Z,1492152825.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:45.969Z,1492152825.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:45.990Z,1492152825.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:46.361Z,1492152826.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:46.402Z,1492152826.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:46.768Z,1492152826.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:46.803Z,1492152826.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:47.166Z,1492152827.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:47.204Z,1492152827.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:47.569Z,1492152827.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:47.601Z,1492152827.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:47.970Z,1492152827.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:47.985Z,1492152827.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:48.403Z,1492152828.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:48.428Z,1492152828.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:48.767Z,1492152828.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:48.788Z,1492152828.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:49.167Z,1492152829.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:49.199Z,1492152829.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:49.573Z,1492152829.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:49.589Z,1492152829.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:49.961Z,1492152829.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:49.988Z,1492152829.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:50.402Z,1492152830.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:50.443Z,1492152830.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:50.777Z,1492152830.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:50.804Z,1492152830.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:51.165Z,1492152831.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:51.218Z,1492152831.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:51.561Z,1492152831.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:51.635Z,1492152831.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:51.998Z,1492152831.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:52.100Z,1492152832.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:52.365Z,1492152832.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:52.422Z,1492152832.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:52.769Z,1492152832.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:52.803Z,1492152832.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:53.169Z,1492152833.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:53.214Z,1492152833.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:53.566Z,1492152833.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:53.618Z,1492152833.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:54.035Z,1492152834.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:54.085Z,1492152834.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:54.369Z,1492152834.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:54.384Z,1492152834.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:54.770Z,1492152834.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:54.786Z,1492152834.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:55.169Z,1492152835.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:55.190Z,1492152835.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:55.572Z,1492152835.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:55.590Z,1492152835.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:56.005Z,1492152836.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:56.070Z,1492152836.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:56.365Z,1492152836.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:56.404Z,1492152836.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:56.763Z,1492152836.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:56.797Z,1492152836.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:57.161Z,1492152837.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:57.177Z,1492152837.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:57.568Z,1492152837.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:57.584Z,1492152837.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:58.050Z,1492152838.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:58.073Z,1492152838.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:58.369Z,1492152838.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:58.385Z,1492152838.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:58.769Z,1492152838.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:58.785Z,1492152838.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:59.172Z,1492152839.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:59.188Z,1492152839.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:59.569Z,1492152839.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:59.585Z,1492152839.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:53:59.969Z,1492152839.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:53:59.990Z,1492152839.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:00.389Z,1492152840.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:00.410Z,1492152840.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:00.765Z,1492152840.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:00.798Z,1492152840.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:01.164Z,1492152841.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:01.204Z,1492152841.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:01.573Z,1492152841.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:01.600Z,1492152841.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:01.961Z,1492152841.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:01.998Z,1492152841.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:02.390Z,1492152842.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:02.410Z,1492152842.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:02.761Z,1492152842.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:02.798Z,1492152842.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:03.165Z,1492152843.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:03.192Z,1492152843.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:03.582Z,1492152843.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:03.602Z,1492152843.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:03.969Z,1492152843.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:04.002Z,1492152844.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:04.390Z,1492152844.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:04.423Z,1492152844.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:04.765Z,1492152844.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:04.802Z,1492152844.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:05.169Z,1492152845.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:05.237Z,1492152845.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:05.562Z,1492152845.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:05.610Z,1492152845.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:06.034Z,1492152846.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:06.085Z,1492152846.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:06.381Z,1492152846.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:06.438Z,1492152846.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:06.770Z,1492152846.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:06.789Z,1492152846.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:07.168Z,1492152847.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:07.215Z,1492152847.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:07.576Z,1492152847.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:07.592Z,1492152847.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:08.028Z,1492152848.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:08.092Z,1492152848.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:08.376Z,1492152848.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:08.401Z,1492152848.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:08.782Z,1492152848.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:08.798Z,1492152848.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:09.161Z,1492152849.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:09.197Z,1492152849.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:09.565Z,1492152849.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:09.599Z,1492152849.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:10.032Z,1492152850.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:10.063Z,1492152850.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:10.359Z,1492152850.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:10.374Z,1492152850.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:10.761Z,1492152850.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:10.804Z,1492152850.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:11.165Z,1492152851.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:11.202Z,1492152851.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:11.569Z,1492152851.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:11.605Z,1492152851.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:12.015Z,1492152852.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:12.060Z,1492152852.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:12.378Z,1492152852.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:12.406Z,1492152852.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:12.772Z,1492152852.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:12.788Z,1492152852.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:13.169Z,1492152853.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:13.185Z,1492152853.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:13.572Z,1492152853.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:13.588Z,1492152853.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:13.970Z,1492152853.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:14.073Z,1492152854.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:14.380Z,1492152854.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:14.404Z,1492152854.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:14.762Z,1492152854.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:14.794Z,1492152854.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:15.165Z,1492152855.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:15.200Z,1492152855.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:15.572Z,1492152855.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:15.602Z,1492152855.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:15.965Z,1492152855.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:15.000Z,1492152856.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:16.363Z,1492152856.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:16.444Z,1492152856.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:16.775Z,1492152856.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:16.822Z,1492152856.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:17.170Z,1492152857.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:17.186Z,1492152857.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:17.561Z,1492152857.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:17.601Z,1492152857.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:18.027Z,1492152858.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:18.066Z,1492152858.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:18.394Z,1492152858.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:18.476Z,1492152858.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:18.779Z,1492152858.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:18.795Z,1492152858.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:19.180Z,1492152859.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:19.215Z,1492152859.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:19.577Z,1492152859.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:19.615Z,1492152859.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:20.044Z,1492152860.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:20.289Z,1492152860.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:20.443Z,1492152860.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:20.550Z,1492152860.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:20.823Z,1492152860.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:20.902Z,1492152860.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:25.445Z,1492152865.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:25.461Z,1492152865.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:25.573Z,1492152865.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:25.650Z,1492152865.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:25.952Z,1492152865.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:26.044Z,1492152866.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:26.325Z,1492152866.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:26.353Z,1492152866.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:26.726Z,1492152866.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:26.760Z,1492152866.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:27.125Z,1492152867.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:27.160Z,1492152867.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:27.517Z,1492152867.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:27.545Z,1492152867.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:27.924Z,1492152867.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:27.952Z,1492152867.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:28.324Z,1492152868.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:28.339Z,1492152868.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:28.724Z,1492152868.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:28.740Z,1492152868.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:29.124Z,1492152869.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:29.147Z,1492152869.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:29.529Z,1492152869.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:29.545Z,1492152869.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:29.922Z,1492152869.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:29.938Z,1492152869.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:30.336Z,1492152870.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:30.387Z,1492152870.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:30.729Z,1492152870.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:30.750Z,1492152870.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:31.117Z,1492152871.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:31.146Z,1492152871.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:31.517Z,1492152871.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:31.552Z,1492152871.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:31.917Z,1492152871.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:31.950Z,1492152871.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:32.354Z,1492152872.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:32.386Z,1492152872.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:32.733Z,1492152872.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:32.754Z,1492152872.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:33.121Z,1492152873.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:33.147Z,1492152873.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:33.517Z,1492152873.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:33.544Z,1492152873.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:33.000Z,1492152874.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:34.041Z,1492152874.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:34.333Z,1492152874.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:34.366Z,1492152874.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:34.717Z,1492152874.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:34.749Z,1492152874.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:35.126Z,1492152875.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:35.156Z,1492152875.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:35.544Z,1492152875.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:35.560Z,1492152875.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:35.996Z,1492152875.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:36.021Z,1492152876.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:36.326Z,1492152876.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:36.345Z,1492152876.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:36.730Z,1492152876.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:36.750Z,1492152876.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:37.124Z,1492152877.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:37.140Z,1492152877.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:37.523Z,1492152877.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:37.554Z,1492152877.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:37.981Z,1492152877.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:38.048Z,1492152878.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:38.317Z,1492152878.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:38.386Z,1492152878.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:38.717Z,1492152878.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:38.754Z,1492152878.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:39.121Z,1492152879.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:39.174Z,1492152879.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:39.521Z,1492152879.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:39.557Z,1492152879.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:39.974Z,1492152879.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:40.021Z,1492152880.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:40.325Z,1492152880.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:40.392Z,1492152880.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:40.717Z,1492152880.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:40.754Z,1492152880.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:41.121Z,1492152881.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:41.137Z,1492152881.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:41.521Z,1492152881.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:41.539Z,1492152881.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:41.927Z,1492152881.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:42.031Z,1492152882.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:42.340Z,1492152882.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:42.360Z,1492152882.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:42.734Z,1492152882.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:42.750Z,1492152882.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:43.117Z,1492152883.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:43.146Z,1492152883.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:43.517Z,1492152883.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:43.557Z,1492152883.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:43.925Z,1492152883.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:43.952Z,1492152883.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:44.319Z,1492152884.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:44.375Z,1492152884.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:44.722Z,1492152884.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:44.757Z,1492152884.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:45.126Z,1492152885.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:45.166Z,1492152885.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:45.518Z,1492152885.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:45.544Z,1492152885.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:45.918Z,1492152885.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:45.936Z,1492152885.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:46.327Z,1492152886.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:46.380Z,1492152886.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:46.728Z,1492152886.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:46.744Z,1492152886.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:47.124Z,1492152887.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:47.141Z,1492152887.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:47.530Z,1492152887.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:47.548Z,1492152887.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:47.968Z,1492152887.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:48.022Z,1492152888.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:48.335Z,1492152888.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:48.352Z,1492152888.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:48.724Z,1492152888.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:48.747Z,1492152888.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:49.124Z,1492152889.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:49.145Z,1492152889.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:49.539Z,1492152889.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:49.556Z,1492152889.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:49.986Z,1492152889.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:50.033Z,1492152890.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:50.337Z,1492152890.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:50.383Z,1492152890.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:50.734Z,1492152890.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:50.758Z,1492152890.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:51.121Z,1492152891.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:51.148Z,1492152891.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:51.518Z,1492152891.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:51.554Z,1492152891.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:51.971Z,1492152891.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:52.018Z,1492152892.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:52.328Z,1492152892.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:52.414Z,1492152892.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:52.729Z,1492152892.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:52.745Z,1492152892.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:53.127Z,1492152893.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:53.152Z,1492152893.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:53.547Z,1492152893.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:53.629Z,1492152893.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:53.970Z,1492152893.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:54.004Z,1492152894.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:54.324Z,1492152894.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:54.383Z,1492152894.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:54.719Z,1492152894.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:54.786Z,1492152894.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:55.117Z,1492152895.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:55.154Z,1492152895.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:55.518Z,1492152895.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:55.558Z,1492152895.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:55.922Z,1492152895.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:55.950Z,1492152895.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:56.320Z,1492152896.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:56.336Z,1492152896.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:56.722Z,1492152896.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:56.742Z,1492152896.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:57.125Z,1492152897.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:57.142Z,1492152897.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:57.524Z,1492152897.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:57.540Z,1492152897.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:57.927Z,1492152897.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:57.943Z,1492152897.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:58.347Z,1492152898.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:58.459Z,1492152898.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:58.729Z,1492152898.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:58.766Z,1492152898.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:59.129Z,1492152899.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:59.144Z,1492152899.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:59.517Z,1492152899.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:59.552Z,1492152899.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:54:59.921Z,1492152899.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:54:59.948Z,1492152899.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:00.349Z,1492152900.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:00.431Z,1492152900.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:00.725Z,1492152900.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:00.751Z,1492152900.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:01.122Z,1492152901.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:01.146Z,1492152901.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:01.525Z,1492152901.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:01.561Z,1492152901.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:01.965Z,1492152901.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:02.019Z,1492152902.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:02.325Z,1492152902.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:02.358Z,1492152902.358 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:02.359Z,1492152902.359 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T06:55:02.359Z,1492152902.359 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:55:02.382Z,1492152902.382 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:02.382Z,1492152902.382 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T06:55:02.382Z,1492152902.382 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:55:02.409Z,1492152902.409 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:55:02.410Z,1492152902.410 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:55:02.726Z,1492152902.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:02.795Z,1492152902.795 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:55:02.795Z,1492152902.795 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T06:55:02.795Z,1492152902.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:55:02.795Z,1492152902.796 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T06:55:03.125Z,1492152903.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:03.139Z,1492152903.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:55:03.140Z,1492152903.140 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:55:03.140Z,1492152903.140 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:55:03.145Z,1492152903.145 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:55:03.146Z,1492152903.145 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:55:03.146Z,1492152903.146 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:55:03.523Z,1492152903.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:03.543Z,1492152903.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:03.984Z,1492152903.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:04.014Z,1492152904.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:04.326Z,1492152904.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:04.379Z,1492152904.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:04.717Z,1492152904.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:04.751Z,1492152904.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:05.117Z,1492152905.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:05.154Z,1492152905.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:05.522Z,1492152905.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:05.538Z,1492152905.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:05.946Z,1492152905.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:05.998Z,1492152905.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:06.329Z,1492152906.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:06.395Z,1492152906.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:06.722Z,1492152906.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:06.759Z,1492152906.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:07.126Z,1492152907.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:07.142Z,1492152907.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:07.525Z,1492152907.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:07.582Z,1492152907.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:07.950Z,1492152907.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:07.992Z,1492152907.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:08.321Z,1492152908.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:08.392Z,1492152908.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:08.717Z,1492152908.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:08.753Z,1492152908.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:09.117Z,1492152909.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:09.170Z,1492152909.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:09.521Z,1492152909.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:09.548Z,1492152909.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:09.917Z,1492152909.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:10.024Z,1492152910.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:10.319Z,1492152910.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:10.352Z,1492152910.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:10.724Z,1492152910.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:10.744Z,1492152910.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:11.129Z,1492152911.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:11.144Z,1492152911.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:11.517Z,1492152911.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:11.543Z,1492152911.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:11.917Z,1492152911.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:11.944Z,1492152911.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:12.400Z,1492152912.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:12.441Z,1492152912.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:12.714Z,1492152912.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:12.752Z,1492152912.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:13.132Z,1492152913.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:13.154Z,1492152913.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:13.517Z,1492152913.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:13.543Z,1492152913.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:13.914Z,1492152913.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:13.953Z,1492152913.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:14.379Z,1492152914.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:14.443Z,1492152914.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:14.726Z,1492152914.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:14.751Z,1492152914.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:15.129Z,1492152915.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:15.144Z,1492152915.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:15.529Z,1492152915.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:15.552Z,1492152915.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:15.954Z,1492152915.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:15.997Z,1492152915.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:16.318Z,1492152916.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:16.345Z,1492152916.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:16.717Z,1492152916.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:16.761Z,1492152916.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:17.135Z,1492152917.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:17.157Z,1492152917.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:17.517Z,1492152917.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:17.565Z,1492152917.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:17.942Z,1492152917.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:17.993Z,1492152917.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:18.318Z,1492152918.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:18.357Z,1492152918.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:18.717Z,1492152918.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:18.755Z,1492152918.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:19.122Z,1492152919.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:19.150Z,1492152919.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:19.525Z,1492152919.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:19.552Z,1492152919.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:19.934Z,1492152919.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:19.978Z,1492152919.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:20.336Z,1492152920.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:20.366Z,1492152920.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:20.733Z,1492152920.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:20.760Z,1492152920.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:21.125Z,1492152921.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:21.213Z,1492152921.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:24.670Z,1492152924.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:24.687Z,1492152924.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:24.792Z,1492152924.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:24.817Z,1492152924.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:25.182Z,1492152925.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:25.237Z,1492152925.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:25.574Z,1492152925.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:25.601Z,1492152925.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:25.970Z,1492152925.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:26.042Z,1492152926.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:26.418Z,1492152926.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:26.459Z,1492152926.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:26.770Z,1492152926.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:26.797Z,1492152926.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:27.170Z,1492152927.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:27.197Z,1492152927.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:27.570Z,1492152927.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:27.597Z,1492152927.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:27.969Z,1492152927.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:28.005Z,1492152928.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:28.370Z,1492152928.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:28.421Z,1492152928.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:28.775Z,1492152928.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:28.803Z,1492152928.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:29.170Z,1492152929.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:29.202Z,1492152929.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:29.570Z,1492152929.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:29.586Z,1492152929.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:29.966Z,1492152929.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:29.986Z,1492152929.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:30.382Z,1492152930.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:30.410Z,1492152930.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:30.784Z,1492152930.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:30.829Z,1492152930.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:31.173Z,1492152931.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:31.198Z,1492152931.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:31.571Z,1492152931.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:31.593Z,1492152931.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:31.983Z,1492152931.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:32.008Z,1492152932.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:32.380Z,1492152932.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:32.408Z,1492152932.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:32.767Z,1492152932.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:32.816Z,1492152932.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:33.165Z,1492152933.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:33.208Z,1492152933.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:33.569Z,1492152933.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:33.607Z,1492152933.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:33.979Z,1492152933.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:34.008Z,1492152934.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:34.373Z,1492152934.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:34.408Z,1492152934.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:34.771Z,1492152934.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:34.807Z,1492152934.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:35.174Z,1492152935.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:35.190Z,1492152935.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:35.575Z,1492152935.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:35.591Z,1492152935.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:35.982Z,1492152935.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:36.018Z,1492152936.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:36.378Z,1492152936.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:36.394Z,1492152936.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:36.780Z,1492152936.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:36.797Z,1492152936.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:37.188Z,1492152937.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:37.206Z,1492152937.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:37.568Z,1492152937.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:37.594Z,1492152937.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:38.001Z,1492152938.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:38.054Z,1492152938.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:38.379Z,1492152938.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:38.450Z,1492152938.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:38.765Z,1492152938.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:38.838Z,1492152938.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:39.166Z,1492152939.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:39.194Z,1492152939.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:39.565Z,1492152939.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:39.621Z,1492152939.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:39.969Z,1492152939.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:40.008Z,1492152940.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:40.366Z,1492152940.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:40.437Z,1492152940.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:40.769Z,1492152940.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:40.837Z,1492152940.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:41.164Z,1492152941.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:41.200Z,1492152941.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:41.565Z,1492152941.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:41.592Z,1492152941.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:41.983Z,1492152941.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:41.000Z,1492152942.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:42.369Z,1492152942.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:42.402Z,1492152942.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:42.769Z,1492152942.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:42.795Z,1492152942.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:43.169Z,1492152943.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:43.197Z,1492152943.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:43.565Z,1492152943.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:43.598Z,1492152943.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:43.965Z,1492152943.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:43.996Z,1492152943.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:44.377Z,1492152944.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:44.414Z,1492152944.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:44.769Z,1492152944.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:44.801Z,1492152944.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:45.169Z,1492152945.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:45.185Z,1492152945.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:45.562Z,1492152945.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:45.578Z,1492152945.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:45.977Z,1492152945.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:46.012Z,1492152946.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:46.370Z,1492152946.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:46.386Z,1492152946.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:46.769Z,1492152946.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:46.785Z,1492152946.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:47.174Z,1492152947.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:47.190Z,1492152947.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:47.572Z,1492152947.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:47.587Z,1492152947.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:47.973Z,1492152947.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:47.994Z,1492152947.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:48.377Z,1492152948.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:48.393Z,1492152948.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:48.773Z,1492152948.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:48.789Z,1492152948.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:49.165Z,1492152949.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:49.201Z,1492152949.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:49.569Z,1492152949.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:49.596Z,1492152949.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:49.965Z,1492152949.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:49.998Z,1492152949.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:50.369Z,1492152950.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:50.396Z,1492152950.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:50.769Z,1492152950.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:50.796Z,1492152950.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:51.165Z,1492152951.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:51.202Z,1492152951.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:51.565Z,1492152951.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:51.598Z,1492152951.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:51.993Z,1492152951.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:52.042Z,1492152952.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:52.365Z,1492152952.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:52.401Z,1492152952.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:52.765Z,1492152952.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:52.833Z,1492152952.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:53.166Z,1492152953.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:53.222Z,1492152953.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:53.576Z,1492152953.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:53.601Z,1492152953.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:53.973Z,1492152953.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:54.015Z,1492152954.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:54.365Z,1492152954.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:54.386Z,1492152954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:54.779Z,1492152954.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:54.834Z,1492152954.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:55.176Z,1492152955.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:55.224Z,1492152955.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:55.573Z,1492152955.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:55.588Z,1492152955.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:55.972Z,1492152955.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:55.988Z,1492152955.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:56.378Z,1492152956.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:56.398Z,1492152956.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:56.773Z,1492152956.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:56.794Z,1492152956.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:57.173Z,1492152957.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:57.188Z,1492152957.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:57.562Z,1492152957.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:57.588Z,1492152957.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:57.975Z,1492152957.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:57.998Z,1492152957.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:58.378Z,1492152958.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:58.394Z,1492152958.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:58.762Z,1492152958.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:58.797Z,1492152958.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:59.177Z,1492152959.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:59.193Z,1492152959.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:59.573Z,1492152959.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:59.588Z,1492152959.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:55:59.968Z,1492152959.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:55:59.999Z,1492152959.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:00.381Z,1492152960.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:00.397Z,1492152960.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:00.765Z,1492152960.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:00.791Z,1492152960.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:01.177Z,1492152961.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:01.192Z,1492152961.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:01.577Z,1492152961.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:01.598Z,1492152961.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:01.965Z,1492152961.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:01.998Z,1492152961.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:02.362Z,1492152962.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:02.397Z,1492152962.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:02.776Z,1492152962.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:02.793Z,1492152962.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:03.165Z,1492152963.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:03.198Z,1492152963.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:03.565Z,1492152963.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:03.591Z,1492152963.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:03.965Z,1492152963.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:03.993Z,1492152963.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:04.365Z,1492152964.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:04.398Z,1492152964.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:04.777Z,1492152964.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:04.792Z,1492152964.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:05.171Z,1492152965.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:05.186Z,1492152965.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:05.569Z,1492152965.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:05.584Z,1492152965.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:05.977Z,1492152965.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:06.014Z,1492152966.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:06.373Z,1492152966.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:06.401Z,1492152966.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:06.777Z,1492152966.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:06.793Z,1492152966.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:07.182Z,1492152967.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:07.234Z,1492152967.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:07.566Z,1492152967.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:07.630Z,1492152967.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:07.970Z,1492152967.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:07.998Z,1492152967.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:08.390Z,1492152968.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:08.442Z,1492152968.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:08.778Z,1492152968.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:08.805Z,1492152968.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:09.187Z,1492152969.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:09.253Z,1492152969.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:09.573Z,1492152969.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:09.633Z,1492152969.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:09.967Z,1492152969.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:09.984Z,1492152969.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:10.377Z,1492152970.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:10.393Z,1492152970.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:10.772Z,1492152970.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:10.789Z,1492152970.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:11.181Z,1492152971.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:11.199Z,1492152971.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:11.577Z,1492152971.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:11.592Z,1492152971.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:11.975Z,1492152971.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:11.990Z,1492152971.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:12.378Z,1492152972.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:12.398Z,1492152972.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:12.781Z,1492152972.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:12.796Z,1492152972.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:13.180Z,1492152973.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:13.195Z,1492152973.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:13.563Z,1492152973.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:13.599Z,1492152973.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:13.966Z,1492152973.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:14.002Z,1492152974.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:14.365Z,1492152974.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:14.394Z,1492152974.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:14.762Z,1492152974.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:14.800Z,1492152974.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:15.165Z,1492152975.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:15.193Z,1492152975.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:15.565Z,1492152975.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:15.600Z,1492152975.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:15.965Z,1492152975.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:15.993Z,1492152975.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:16.386Z,1492152976.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:16.402Z,1492152976.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:16.769Z,1492152976.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:16.797Z,1492152976.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:17.167Z,1492152977.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:17.208Z,1492152977.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:17.565Z,1492152977.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:17.602Z,1492152977.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:17.965Z,1492152977.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:17.997Z,1492152977.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:18.370Z,1492152978.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:18.386Z,1492152978.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:18.773Z,1492152978.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:18.813Z,1492152978.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:19.174Z,1492152979.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:19.189Z,1492152979.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:19.577Z,1492152979.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:19.598Z,1492152979.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:19.965Z,1492152979.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:19.992Z,1492152979.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:20.365Z,1492152980.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:20.391Z,1492152980.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:20.765Z,1492152980.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:20.805Z,1492152980.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:21.181Z,1492152981.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:21.202Z,1492152981.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:24.739Z,1492152984.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:24.828Z,1492152984.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:24.974Z,1492152984.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:25.023Z,1492152985.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:25.281Z,1492152985.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:25.356Z,1492152985.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:25.703Z,1492152985.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:25.774Z,1492152985.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:26.097Z,1492152986.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:26.150Z,1492152986.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:26.486Z,1492152986.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:26.543Z,1492152986.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:26.890Z,1492152986.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:26.906Z,1492152986.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:27.292Z,1492152987.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:27.308Z,1492152987.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:27.699Z,1492152987.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:27.754Z,1492152987.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:28.081Z,1492152988.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:28.125Z,1492152988.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:28.481Z,1492152988.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:28.541Z,1492152988.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:28.893Z,1492152988.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:28.908Z,1492152988.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:29.302Z,1492152989.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:29.317Z,1492152989.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:29.702Z,1492152989.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:29.781Z,1492152989.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:30.081Z,1492152990.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:30.168Z,1492152990.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:30.478Z,1492152990.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:30.517Z,1492152990.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:30.891Z,1492152990.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:30.918Z,1492152990.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:30.925Z,1492152990.925 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:30.925Z,1492152990.925 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T06:56:30.926Z,1492152990.926 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:56:30.940Z,1492152990.940 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:56:31.281Z,1492152991.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:31.322Z,1492152991.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:31.340Z,1492152991.340 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:56:31.340Z,1492152991.340 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T06:56:31.678Z,1492152991.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:31.733Z,1492152991.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:31.779Z,1492152991.779 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:56:31.780Z,1492152991.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:56:31.780Z,1492152991.780 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:56:32.084Z,1492152992.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:32.124Z,1492152992.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:32.495Z,1492152992.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:32.511Z,1492152992.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:32.878Z,1492152992.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:32.915Z,1492152992.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:33.292Z,1492152993.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:33.308Z,1492152993.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:33.689Z,1492152993.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:33.718Z,1492152993.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:34.091Z,1492152994.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:34.114Z,1492152994.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:34.484Z,1492152994.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:34.508Z,1492152994.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:34.881Z,1492152994.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:34.916Z,1492152994.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:35.300Z,1492152995.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:35.316Z,1492152995.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:35.681Z,1492152995.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:35.716Z,1492152995.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:36.100Z,1492152996.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:36.115Z,1492152996.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:36.481Z,1492152996.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:36.517Z,1492152996.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:36.904Z,1492152996.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:36.920Z,1492152996.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:37.281Z,1492152997.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:37.316Z,1492152997.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:37.685Z,1492152997.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:37.714Z,1492152997.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:38.081Z,1492152998.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:38.110Z,1492152998.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:38.513Z,1492152998.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:38.614Z,1492152998.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:38.895Z,1492152998.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:38.929Z,1492152998.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:39.283Z,1492152999.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:39.301Z,1492152999.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:39.686Z,1492152999.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:39.800Z,1492152999.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:40.081Z,1492153000.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:40.110Z,1492153000.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:40.492Z,1492153000.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:40.550Z,1492153000.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:40.881Z,1492153000.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:40.946Z,1492153000.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:41.283Z,1492153001.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:41.372Z,1492153001.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:41.681Z,1492153001.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:41.805Z,1492153001.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:42.081Z,1492153002.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:42.128Z,1492153002.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:42.481Z,1492153002.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:42.511Z,1492153002.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:42.895Z,1492153002.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:42.928Z,1492153002.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:43.282Z,1492153003.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:43.328Z,1492153003.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:43.681Z,1492153003.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:43.767Z,1492153003.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:44.091Z,1492153004.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:44.123Z,1492153004.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:44.481Z,1492153004.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:44.526Z,1492153004.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:44.875Z,1492153004.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:44.913Z,1492153004.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:45.286Z,1492153005.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:45.360Z,1492153005.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:45.702Z,1492153005.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:45.795Z,1492153005.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:46.098Z,1492153006.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:46.113Z,1492153006.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:46.506Z,1492153006.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:46.521Z,1492153006.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:46.949Z,1492153006.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:46.978Z,1492153006.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:47.320Z,1492153007.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:47.343Z,1492153007.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:47.702Z,1492153007.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:47.718Z,1492153007.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:48.102Z,1492153008.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:48.129Z,1492153008.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:48.520Z,1492153008.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:48.567Z,1492153008.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:48.897Z,1492153008.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:48.933Z,1492153008.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:49.294Z,1492153009.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:49.341Z,1492153009.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:49.681Z,1492153009.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:49.716Z,1492153009.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:50.080Z,1492153010.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:50.117Z,1492153010.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:50.481Z,1492153010.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:50.498Z,1492153010.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:50.895Z,1492153010.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:50.911Z,1492153010.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:51.293Z,1492153011.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:51.314Z,1492153011.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:51.694Z,1492153011.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:51.712Z,1492153011.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:52.091Z,1492153012.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:52.114Z,1492153012.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:52.491Z,1492153012.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:52.523Z,1492153012.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:52.896Z,1492153012.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:52.958Z,1492153012.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:53.293Z,1492153013.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:53.347Z,1492153013.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:53.742Z,1492153013.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:53.783Z,1492153013.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:54.092Z,1492153014.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:54.144Z,1492153014.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:54.493Z,1492153014.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:54.514Z,1492153014.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:54.893Z,1492153014.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:54.946Z,1492153014.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:55.299Z,1492153015.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:55.340Z,1492153015.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:55.728Z,1492153015.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:55.786Z,1492153015.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:56.117Z,1492153016.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:56.149Z,1492153016.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:56.500Z,1492153016.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:56.540Z,1492153016.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:56.891Z,1492153016.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:56.906Z,1492153016.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:57.306Z,1492153017.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:57.347Z,1492153017.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:57.796Z,1492153017.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:57.860Z,1492153017.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:58.106Z,1492153018.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:58.146Z,1492153018.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:58.483Z,1492153018.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:58.556Z,1492153018.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:58.909Z,1492153018.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:58.974Z,1492153018.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:59.281Z,1492153019.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:59.313Z,1492153019.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:56:59.733Z,1492153019.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:56:59.789Z,1492153019.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:00.089Z,1492153020.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:00.125Z,1492153020.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:00.496Z,1492153020.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:00.511Z,1492153020.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:00.887Z,1492153020.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:00.903Z,1492153020.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:01.292Z,1492153021.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:01.318Z,1492153021.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:01.688Z,1492153021.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:01.762Z,1492153021.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:02.088Z,1492153022.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:02.125Z,1492153022.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:02.484Z,1492153022.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:02.536Z,1492153022.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:02.892Z,1492153022.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:02.937Z,1492153022.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:03.293Z,1492153023.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:03.334Z,1492153023.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:03.705Z,1492153023.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:03.729Z,1492153023.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:04.159Z,1492153024.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:04.290Z,1492153024.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:04.489Z,1492153024.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:04.564Z,1492153024.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:04.888Z,1492153024.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:04.937Z,1492153024.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:05.289Z,1492153025.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:05.310Z,1492153025.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:05.693Z,1492153025.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:05.709Z,1492153025.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:06.088Z,1492153026.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:06.150Z,1492153026.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:06.481Z,1492153026.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:06.517Z,1492153026.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:06.893Z,1492153026.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:06.915Z,1492153026.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:07.281Z,1492153027.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:07.419Z,1492153027.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:07.731Z,1492153027.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:07.808Z,1492153027.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:08.085Z,1492153028.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:08.115Z,1492153028.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:08.501Z,1492153028.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:08.560Z,1492153028.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:08.885Z,1492153028.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:08.911Z,1492153028.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:09.285Z,1492153029.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:09.338Z,1492153029.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:09.758Z,1492153029.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:09.821Z,1492153029.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:10.081Z,1492153030.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:10.117Z,1492153030.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:10.479Z,1492153030.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:10.515Z,1492153030.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:10.890Z,1492153030.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:10.905Z,1492153030.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:11.292Z,1492153031.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:11.308Z,1492153031.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:11.743Z,1492153031.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:11.790Z,1492153031.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:12.094Z,1492153032.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:12.109Z,1492153032.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:12.481Z,1492153032.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:12.515Z,1492153032.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:12.878Z,1492153032.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:12.910Z,1492153032.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:13.285Z,1492153033.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:13.311Z,1492153033.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:13.754Z,1492153033.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:13.805Z,1492153033.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:14.081Z,1492153034.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:14.114Z,1492153034.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:14.481Z,1492153034.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:14.517Z,1492153034.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:14.878Z,1492153034.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:14.906Z,1492153034.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:14.948Z,1492153034.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:15.281Z,1492153035.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:15.313Z,1492153035.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:15.693Z,1492153035.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:15.717Z,1492153035.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:15.746Z,1492153035.746 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:16.092Z,1492153036.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:16.108Z,1492153036.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:16.224Z,1492153036.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:16.489Z,1492153036.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:16.505Z,1492153036.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:16.898Z,1492153036.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:16.923Z,1492153036.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:17.020Z,1492153037.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:17.281Z,1492153037.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:17.318Z,1492153037.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:17.693Z,1492153037.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:17.709Z,1492153037.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:17.816Z,1492153037.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:18.081Z,1492153038.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:18.203Z,1492153038.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:18.501Z,1492153038.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:18.522Z,1492153038.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:18.568Z,1492153038.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:18.893Z,1492153038.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:18.920Z,1492153038.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:19.293Z,1492153039.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:19.320Z,1492153039.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:19.364Z,1492153039.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:19.686Z,1492153039.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:19.714Z,1492153039.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:20.117Z,1492153040.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:20.190Z,1492153040.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:20.486Z,1492153040.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:20.526Z,1492153040.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:20.534Z,1492153040.534 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T06:57:20.534Z,1492153040.534 [Default:CheckIn:C.Wait] Stopped
2017-04-14T06:57:20.534Z,1492153040.534 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T06:57:20.534Z,1492153040.534 [Default:CheckIn:D] Running Loop=1
2017-04-14T06:57:20.897Z,1492153040.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:20.912Z,1492153040.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:20.937Z,1492153040.937 [Default:CheckIn:D] Stopped
2017-04-14T06:57:20.937Z,1492153040.937 [Default:CheckIn:E] Running Loop=1
2017-04-14T06:57:21.310Z,1492153041.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:21.352Z,1492153041.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:21.397Z,1492153041.397 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 211.260303 min 
2017-04-14T06:57:21.397Z,1492153041.397 [Default:CheckIn:E] Stopped
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn] Stopped
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn](INFO): Running loop #30
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn] Running Loop=30
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T06:57:21.398Z,1492153041.398 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T06:57:25.664Z,1492153045.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:25.853Z,1492153045.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:25.937Z,1492153045.937 [NAL9602](INFO): Powering up
2017-04-14T06:57:25.954Z,1492153045.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:25.984Z,1492153045.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:26.333Z,1492153046.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:26.372Z,1492153046.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:26.741Z,1492153046.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:26.790Z,1492153046.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:27.133Z,1492153047.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:27.167Z,1492153047.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:27.533Z,1492153047.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:27.574Z,1492153047.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:27.938Z,1492153047.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:27.986Z,1492153047.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:28.341Z,1492153048.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:28.357Z,1492153048.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:28.738Z,1492153048.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:28.754Z,1492153048.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:29.141Z,1492153049.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:29.157Z,1492153049.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:29.543Z,1492153049.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:29.559Z,1492153049.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:29.941Z,1492153049.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:29.962Z,1492153049.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:30.344Z,1492153050.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:30.361Z,1492153050.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:30.739Z,1492153050.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:30.756Z,1492153050.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:31.136Z,1492153051.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:31.185Z,1492153051.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:31.544Z,1492153051.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:31.562Z,1492153051.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:31.947Z,1492153051.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:31.964Z,1492153051.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:32.341Z,1492153052.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:32.362Z,1492153052.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:32.745Z,1492153052.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:32.760Z,1492153052.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:33.141Z,1492153053.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:33.157Z,1492153053.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:33.552Z,1492153053.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:33.567Z,1492153053.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:33.948Z,1492153053.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:33.963Z,1492153053.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:34.343Z,1492153054.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:34.359Z,1492153054.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:34.749Z,1492153054.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:34.806Z,1492153054.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:35.145Z,1492153055.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:35.176Z,1492153055.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:35.533Z,1492153055.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:35.570Z,1492153055.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:35.936Z,1492153055.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:35.966Z,1492153055.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:36.336Z,1492153056.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:36.361Z,1492153056.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:36.757Z,1492153056.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:36.777Z,1492153056.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:37.129Z,1492153057.129 [NAL9602](INFO): NAL9602 initialized
2017-04-14T06:57:37.145Z,1492153057.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:37.177Z,1492153057.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:37.533Z,1492153057.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:37.565Z,1492153057.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:37.968Z,1492153057.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:37.984Z,1492153057.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:38.367Z,1492153058.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:38.383Z,1492153058.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:38.756Z,1492153058.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:38.785Z,1492153058.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:39.145Z,1492153059.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:39.206Z,1492153059.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:39.543Z,1492153059.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:39.559Z,1492153059.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:39.962Z,1492153059.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:40.022Z,1492153060.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:40.338Z,1492153060.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:40.354Z,1492153060.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:40.757Z,1492153060.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:40.790Z,1492153060.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:41.141Z,1492153061.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:41.206Z,1492153061.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:41.538Z,1492153061.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:41.554Z,1492153061.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:41.942Z,1492153061.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:41.998Z,1492153061.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:42.347Z,1492153062.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:42.388Z,1492153062.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:42.747Z,1492153062.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:42.763Z,1492153062.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:43.146Z,1492153063.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:43.162Z,1492153063.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:43.546Z,1492153063.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:43.562Z,1492153063.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:43.945Z,1492153063.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:43.966Z,1492153063.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:44.341Z,1492153064.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:44.360Z,1492153064.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:44.742Z,1492153064.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:44.762Z,1492153064.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:45.143Z,1492153065.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:45.164Z,1492153065.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:45.543Z,1492153065.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:45.559Z,1492153065.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:45.936Z,1492153065.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:45.970Z,1492153065.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:46.333Z,1492153066.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:46.371Z,1492153066.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:46.746Z,1492153066.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:46.764Z,1492153066.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:47.155Z,1492153067.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:47.175Z,1492153067.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:47.554Z,1492153067.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:47.583Z,1492153067.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:47.938Z,1492153067.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:48.014Z,1492153068.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:48.344Z,1492153068.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:48.393Z,1492153068.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:48.745Z,1492153068.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:48.762Z,1492153068.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:49.154Z,1492153069.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:49.194Z,1492153069.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:49.533Z,1492153069.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:49.566Z,1492153069.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:49.949Z,1492153069.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:49.981Z,1492153069.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:50.345Z,1492153070.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:50.393Z,1492153070.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:50.745Z,1492153070.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:50.763Z,1492153070.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:51.143Z,1492153071.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:51.159Z,1492153071.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:51.562Z,1492153071.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:51.670Z,1492153071.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:51.951Z,1492153071.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:51.968Z,1492153071.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:52.347Z,1492153072.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:52.363Z,1492153072.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:52.750Z,1492153072.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:52.774Z,1492153072.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:53.150Z,1492153073.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:53.206Z,1492153073.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:53.534Z,1492153073.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:53.562Z,1492153073.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:53.946Z,1492153073.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:54.002Z,1492153074.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:54.339Z,1492153074.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:54.368Z,1492153074.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:54.743Z,1492153074.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:54.759Z,1492153074.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:55.145Z,1492153075.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:55.198Z,1492153075.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:55.544Z,1492153075.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:55.560Z,1492153075.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:55.933Z,1492153075.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:56.002Z,1492153076.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:56.333Z,1492153076.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:56.405Z,1492153076.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:56.750Z,1492153076.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:56.774Z,1492153076.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:57.171Z,1492153077.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:57.187Z,1492153077.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:57.541Z,1492153077.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:57.570Z,1492153077.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:57.935Z,1492153077.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:57.981Z,1492153077.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:58.335Z,1492153078.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:58.392Z,1492153078.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:58.742Z,1492153078.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:58.762Z,1492153078.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:59.144Z,1492153079.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:59.160Z,1492153079.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:59.546Z,1492153079.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:59.562Z,1492153079.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:57:59.940Z,1492153079.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:57:59.963Z,1492153079.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:00.342Z,1492153080.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:00.362Z,1492153080.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:00.740Z,1492153080.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:00.769Z,1492153080.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:01.137Z,1492153081.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:01.174Z,1492153081.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:01.522Z,1492153081.522 [NAL9602](INFO): SBD MO Status=0, MOMSN=2123, MT Status=0, MTMSN=0
2017-04-14T06:58:01.522Z,1492153081.522 [NAL9602](INFO): No messages in MT queue
2017-04-14T06:58:01.539Z,1492153081.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:01.583Z,1492153081.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:01.939Z,1492153081.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:01.971Z,1492153081.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:02.360Z,1492153082.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:02.390Z,1492153082.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:02.752Z,1492153082.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:02.781Z,1492153082.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:03.156Z,1492153083.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:03.182Z,1492153083.182 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:03.183Z,1492153083.182 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T06:58:03.183Z,1492153083.183 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:58:03.189Z,1492153083.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:03.190Z,1492153083.190 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T06:58:03.190Z,1492153083.190 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:58:03.204Z,1492153083.204 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:58:03.205Z,1492153083.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:58:03.536Z,1492153083.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:03.643Z,1492153083.643 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:58:03.643Z,1492153083.643 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T06:58:03.652Z,1492153083.652 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:58:03.652Z,1492153083.652 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T06:58:03.933Z,1492153083.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:03.973Z,1492153083.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:58:03.973Z,1492153083.973 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:58:03.974Z,1492153083.974 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:58:03.992Z,1492153083.992 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:58:03.993Z,1492153083.993 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:58:03.993Z,1492153083.993 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:58:04.354Z,1492153084.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:04.391Z,1492153084.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:04.741Z,1492153084.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:04.782Z,1492153084.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:05.167Z,1492153085.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:05.184Z,1492153085.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:05.556Z,1492153085.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:05.646Z,1492153085.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:05.960Z,1492153085.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:05.987Z,1492153085.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:06.338Z,1492153086.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:06.358Z,1492153086.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:06.742Z,1492153086.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:06.758Z,1492153086.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:07.142Z,1492153087.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:07.196Z,1492153087.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:07.541Z,1492153087.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:07.562Z,1492153087.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:07.950Z,1492153087.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:07.995Z,1492153087.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:08.386Z,1492153088.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:08.406Z,1492153088.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:08.756Z,1492153088.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:08.780Z,1492153088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:09.141Z,1492153089.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:09.162Z,1492153089.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:09.544Z,1492153089.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:09.655Z,1492153089.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:09.937Z,1492153089.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:09.988Z,1492153089.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:10.352Z,1492153090.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:10.368Z,1492153090.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:10.742Z,1492153090.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:10.758Z,1492153090.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:11.144Z,1492153091.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:11.167Z,1492153091.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:11.526Z,1492153091.526 [NAL9602](INFO): GPS fix at 20170414T065830: (36.802330, -121.787090)
2017-04-14T06:58:11.543Z,1492153091.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:11.552Z,1492153091.552 [BPC1](ERROR): Failed to receive battery data
2017-04-14T06:58:11.552Z,1492153091.552 [BPC1] Communications Fault, FailCount= 1
2017-04-14T06:58:11.552Z,1492153091.552 [BPC1](ERROR): Communications Fault
2017-04-14T06:58:11.598Z,1492153091.598 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T06:58:11.598Z,1492153091.598 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T06:58:11.625Z,1492153091.625 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T06:58:11.959Z,1492153091.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:11.978Z,1492153091.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:11.978Z,1492153091.978 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T06:58:11.978Z,1492153091.978 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T06:58:11.986Z,1492153091.986 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:11.986Z,1492153091.986 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T06:58:11.986Z,1492153091.986 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T06:58:12.035Z,1492153092.035 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T06:58:12.036Z,1492153092.036 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T06:58:12.350Z,1492153092.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:12.395Z,1492153092.395 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T06:58:12.396Z,1492153092.395 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T06:58:12.396Z,1492153092.396 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T06:58:12.396Z,1492153092.396 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T06:58:12.775Z,1492153092.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:12.795Z,1492153092.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T06:58:12.799Z,1492153092.799 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:58:12.800Z,1492153092.800 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:58:12.809Z,1492153092.809 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T06:58:12.809Z,1492153092.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:58:12.809Z,1492153092.809 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:58:12.900Z,1492153092.899 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:58:12.900Z,1492153092.900 [BPC1] No Fault, FailCount= 1
2017-04-14T06:58:16.475Z,1492153096.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:16.555Z,1492153096.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:16.653Z,1492153096.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:16.695Z,1492153096.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:17.012Z,1492153097.012 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0124.lzma
2017-04-14T06:58:17.047Z,1492153097.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:17.102Z,1492153097.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:17.443Z,1492153097.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:17.458Z,1492153097.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:17.810Z,1492153097.810 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0124.lzma.bak
2017-04-14T06:58:17.810Z,1492153097.810 [DataOverHttps](INFO): SBD MOMSN=4885389
2017-04-14T06:58:17.837Z,1492153097.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:17.902Z,1492153097.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:18.255Z,1492153098.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:18.271Z,1492153098.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:18.635Z,1492153098.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:18.662Z,1492153098.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:23.135Z,1492153103.135 [NAL9602](INFO): Powering down
2017-04-14T06:58:23.175Z,1492153103.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:23.220Z,1492153103.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:23.316Z,1492153103.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:23.341Z,1492153103.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:23.693Z,1492153103.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:23.721Z,1492153103.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:24.105Z,1492153104.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:24.122Z,1492153104.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:24.512Z,1492153104.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:24.528Z,1492153104.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:24.920Z,1492153104.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:24.936Z,1492153104.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:28.416Z,1492153108.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:28.481Z,1492153108.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:28.564Z,1492153108.564 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0125.lzma
2017-04-14T06:58:28.587Z,1492153108.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:28.619Z,1492153108.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:28.953Z,1492153108.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:29.002Z,1492153109.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:29.334Z,1492153109.334 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0125.lzma.bak
2017-04-14T06:58:29.334Z,1492153109.334 [DataOverHttps](INFO): SBD MOMSN=4885392
2017-04-14T06:58:29.357Z,1492153109.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:29.433Z,1492153109.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:29.784Z,1492153109.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:29.800Z,1492153109.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:29.809Z,1492153109.809 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T06:58:29.809Z,1492153109.809 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T06:58:29.810Z,1492153109.810 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T06:58:30.153Z,1492153110.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:30.186Z,1492153110.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:33.735Z,1492153113.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:33.752Z,1492153113.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:33.865Z,1492153113.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:33.928Z,1492153113.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:34.242Z,1492153114.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:34.258Z,1492153114.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:34.646Z,1492153114.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:34.662Z,1492153114.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:35.041Z,1492153115.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:35.057Z,1492153115.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:35.433Z,1492153115.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:35.469Z,1492153115.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:35.841Z,1492153115.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:35.859Z,1492153115.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:36.241Z,1492153116.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:36.258Z,1492153116.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:36.643Z,1492153116.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:36.666Z,1492153116.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:37.043Z,1492153117.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:37.068Z,1492153117.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:37.433Z,1492153117.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:37.468Z,1492153117.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:37.833Z,1492153117.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:37.870Z,1492153117.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:38.233Z,1492153118.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:38.265Z,1492153118.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:38.633Z,1492153118.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:38.648Z,1492153118.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:39.038Z,1492153119.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:39.054Z,1492153119.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:39.445Z,1492153119.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:39.461Z,1492153119.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:39.841Z,1492153119.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:39.862Z,1492153119.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:40.088Z,1492153120.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:40.241Z,1492153120.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:40.330Z,1492153120.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:40.646Z,1492153120.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:40.663Z,1492153120.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:40.884Z,1492153120.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:41.035Z,1492153121.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:41.097Z,1492153121.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:41.444Z,1492153121.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:41.460Z,1492153121.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:41.841Z,1492153121.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:41.899Z,1492153121.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:42.233Z,1492153122.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:42.284Z,1492153122.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:42.635Z,1492153122.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:42.666Z,1492153122.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:43.033Z,1492153123.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:43.065Z,1492153123.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:43.441Z,1492153123.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:43.467Z,1492153123.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:43.833Z,1492153123.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:43.868Z,1492153123.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:44.245Z,1492153124.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:44.272Z,1492153124.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:44.641Z,1492153124.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:44.675Z,1492153124.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:45.037Z,1492153125.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:45.075Z,1492153125.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:45.463Z,1492153125.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:45.479Z,1492153125.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:45.833Z,1492153125.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:45.904Z,1492153125.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:46.233Z,1492153126.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:46.270Z,1492153126.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:46.637Z,1492153126.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:46.664Z,1492153126.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:47.033Z,1492153127.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:47.066Z,1492153127.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:47.437Z,1492153127.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:47.463Z,1492153127.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:47.842Z,1492153127.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:47.858Z,1492153127.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:48.238Z,1492153128.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:48.253Z,1492153128.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:48.644Z,1492153128.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:48.660Z,1492153128.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:49.041Z,1492153129.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:49.057Z,1492153129.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:49.435Z,1492153129.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:49.459Z,1492153129.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:49.833Z,1492153129.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:49.873Z,1492153129.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:50.237Z,1492153130.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:50.270Z,1492153130.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:50.633Z,1492153130.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:50.660Z,1492153130.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:51.033Z,1492153131.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:51.054Z,1492153131.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:51.435Z,1492153131.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:51.451Z,1492153131.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:51.841Z,1492153131.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:51.884Z,1492153131.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:52.234Z,1492153132.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:52.249Z,1492153132.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:52.665Z,1492153132.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:52.702Z,1492153132.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:53.033Z,1492153133.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:53.105Z,1492153133.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:53.440Z,1492153133.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:53.456Z,1492153133.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:53.833Z,1492153133.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:53.899Z,1492153133.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:54.242Z,1492153134.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:54.262Z,1492153134.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:54.644Z,1492153134.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:54.682Z,1492153134.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:55.045Z,1492153135.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:55.105Z,1492153135.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:55.441Z,1492153135.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:55.456Z,1492153135.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:55.833Z,1492153135.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:55.859Z,1492153135.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:56.233Z,1492153136.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:56.260Z,1492153136.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:56.633Z,1492153136.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:56.659Z,1492153136.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:57.033Z,1492153137.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:57.060Z,1492153137.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:57.200Z,1492153137.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:57.449Z,1492153137.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:57.465Z,1492153137.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:57.833Z,1492153137.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:57.866Z,1492153137.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:57.998Z,1492153137.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:58.233Z,1492153138.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:58.267Z,1492153138.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:58.408Z,1492153138.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:58.645Z,1492153138.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:58.666Z,1492153138.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:59.036Z,1492153139.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:59.063Z,1492153139.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:59.437Z,1492153139.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:59.463Z,1492153139.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:58:59.833Z,1492153139.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:58:59.870Z,1492153139.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:00.241Z,1492153140.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:00.268Z,1492153140.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:00.633Z,1492153140.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:00.670Z,1492153140.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:01.037Z,1492153141.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:01.071Z,1492153141.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:01.456Z,1492153141.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:01.480Z,1492153141.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:01.835Z,1492153141.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:01.871Z,1492153141.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:02.260Z,1492153142.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:02.285Z,1492153142.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:02.645Z,1492153142.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:02.661Z,1492153142.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:03.034Z,1492153143.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:03.070Z,1492153143.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:03.489Z,1492153143.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:03.622Z,1492153143.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:03.868Z,1492153143.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:03.903Z,1492153143.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:04.246Z,1492153144.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:04.262Z,1492153144.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:04.646Z,1492153144.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:04.663Z,1492153144.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:05.045Z,1492153145.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:05.062Z,1492153145.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:05.436Z,1492153145.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:05.471Z,1492153145.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:05.838Z,1492153145.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:05.906Z,1492153145.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:06.245Z,1492153146.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:06.261Z,1492153146.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:06.641Z,1492153146.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:06.698Z,1492153146.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:07.039Z,1492153147.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:07.059Z,1492153147.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:07.440Z,1492153147.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:07.493Z,1492153147.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:07.882Z,1492153147.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:07.929Z,1492153147.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:08.242Z,1492153148.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:08.258Z,1492153148.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:08.645Z,1492153148.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:08.689Z,1492153148.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:09.060Z,1492153149.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:09.083Z,1492153149.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:09.435Z,1492153149.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:09.471Z,1492153149.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:09.840Z,1492153149.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:09.877Z,1492153149.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:10.241Z,1492153150.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:10.256Z,1492153150.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:10.681Z,1492153150.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:10.705Z,1492153150.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:11.037Z,1492153151.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:11.064Z,1492153151.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:11.433Z,1492153151.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:11.472Z,1492153151.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:11.831Z,1492153151.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:11.855Z,1492153151.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:12.241Z,1492153152.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:12.256Z,1492153152.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:12.641Z,1492153152.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:12.656Z,1492153152.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:13.034Z,1492153153.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:13.050Z,1492153153.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:13.441Z,1492153153.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:13.456Z,1492153153.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:13.841Z,1492153153.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:13.856Z,1492153153.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:14.241Z,1492153154.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:14.257Z,1492153154.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:14.636Z,1492153154.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:14.670Z,1492153154.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:15.040Z,1492153155.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:15.065Z,1492153155.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:15.482Z,1492153155.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:15.558Z,1492153155.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:15.836Z,1492153155.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:15.872Z,1492153155.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:16.250Z,1492153156.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:16.266Z,1492153156.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:16.633Z,1492153156.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:16.660Z,1492153156.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:17.033Z,1492153157.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:17.072Z,1492153157.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:17.433Z,1492153157.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:17.533Z,1492153157.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:17.838Z,1492153157.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:17.862Z,1492153157.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:18.233Z,1492153158.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:18.327Z,1492153158.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:18.642Z,1492153158.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:18.657Z,1492153158.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:19.045Z,1492153159.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:19.061Z,1492153159.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:19.436Z,1492153159.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:19.526Z,1492153159.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:19.833Z,1492153159.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:19.854Z,1492153159.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:20.233Z,1492153160.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:20.290Z,1492153160.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:20.640Z,1492153160.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:20.694Z,1492153160.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:21.030Z,1492153161.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:21.045Z,1492153161.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:21.438Z,1492153161.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:21.454Z,1492153161.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:21.849Z,1492153161.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:21.884Z,1492153161.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:22.245Z,1492153162.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:22.260Z,1492153162.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:22.634Z,1492153162.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:22.650Z,1492153162.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:23.042Z,1492153163.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:23.062Z,1492153163.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:23.440Z,1492153163.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:23.455Z,1492153163.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:23.851Z,1492153163.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:23.867Z,1492153163.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:24.233Z,1492153164.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:24.266Z,1492153164.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:24.632Z,1492153164.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:24.660Z,1492153164.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:25.038Z,1492153165.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:25.064Z,1492153165.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:25.438Z,1492153165.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:25.474Z,1492153165.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:25.834Z,1492153165.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:25.849Z,1492153165.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:26.233Z,1492153166.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:26.265Z,1492153166.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:26.638Z,1492153166.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:26.664Z,1492153166.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:27.033Z,1492153167.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:27.074Z,1492153167.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:27.441Z,1492153167.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:27.547Z,1492153167.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:27.842Z,1492153167.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:27.862Z,1492153167.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:28.240Z,1492153168.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:28.262Z,1492153168.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:28.645Z,1492153168.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:28.661Z,1492153168.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:29.046Z,1492153169.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:29.066Z,1492153169.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:29.462Z,1492153169.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:29.570Z,1492153169.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:29.844Z,1492153169.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:29.861Z,1492153169.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:30.249Z,1492153170.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:30.270Z,1492153170.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:33.818Z,1492153173.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:33.914Z,1492153173.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:33.922Z,1492153173.922 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:33.922Z,1492153173.922 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T06:59:33.922Z,1492153173.922 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T06:59:33.936Z,1492153173.936 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T06:59:34.010Z,1492153174.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:34.051Z,1492153174.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:34.087Z,1492153174.088 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T06:59:34.088Z,1492153174.088 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T06:59:34.373Z,1492153174.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:34.399Z,1492153174.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:34.405Z,1492153174.405 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T06:59:34.405Z,1492153174.405 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T06:59:34.406Z,1492153174.406 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T06:59:34.782Z,1492153174.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:34.834Z,1492153174.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:35.178Z,1492153175.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:35.209Z,1492153175.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:35.621Z,1492153175.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:35.678Z,1492153175.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:36.022Z,1492153176.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:36.071Z,1492153176.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:36.389Z,1492153176.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:36.422Z,1492153176.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:36.783Z,1492153176.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:36.799Z,1492153176.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:37.181Z,1492153177.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:37.196Z,1492153177.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:37.581Z,1492153177.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:37.598Z,1492153177.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:37.985Z,1492153177.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:38.031Z,1492153178.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:38.385Z,1492153178.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:38.401Z,1492153178.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:38.780Z,1492153178.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:38.800Z,1492153178.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:39.177Z,1492153179.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:39.198Z,1492153179.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:39.580Z,1492153179.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:39.596Z,1492153179.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:39.984Z,1492153179.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:40.009Z,1492153180.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:40.384Z,1492153180.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:40.400Z,1492153180.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:40.771Z,1492153180.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:40.797Z,1492153180.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:41.190Z,1492153181.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:41.206Z,1492153181.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:41.572Z,1492153181.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:41.603Z,1492153181.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:41.975Z,1492153181.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:42.002Z,1492153182.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:42.385Z,1492153182.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:42.406Z,1492153182.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:42.789Z,1492153182.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:42.804Z,1492153182.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:43.173Z,1492153183.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:43.200Z,1492153183.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:43.598Z,1492153183.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:43.613Z,1492153183.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:43.969Z,1492153183.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:44.003Z,1492153184.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:44.372Z,1492153184.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:44.406Z,1492153184.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:44.773Z,1492153184.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:44.800Z,1492153184.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:45.172Z,1492153185.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:45.200Z,1492153185.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:45.569Z,1492153185.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:45.603Z,1492153185.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:45.974Z,1492153185.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:46.001Z,1492153186.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:46.373Z,1492153186.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:46.392Z,1492153186.392 [BPC1](ERROR): Failed to parse message.
2017-04-14T06:59:46.392Z,1492153186.392 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T06:59:46.392Z,1492153186.392 [BPC1] Data Fault, FailCount= 1
2017-04-14T06:59:46.393Z,1492153186.392 [BPC1](ERROR): Data Fault
2017-04-14T06:59:46.401Z,1492153186.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:46.421Z,1492153186.421 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T06:59:46.771Z,1492153186.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:46.799Z,1492153186.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:47.177Z,1492153187.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:47.198Z,1492153187.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:47.589Z,1492153187.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:47.610Z,1492153187.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:47.654Z,1492153187.654 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T06:59:47.654Z,1492153187.654 [BPC1] No Fault, FailCount= 1
2017-04-14T06:59:47.981Z,1492153187.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:48.050Z,1492153188.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:48.381Z,1492153188.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:48.439Z,1492153188.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:48.769Z,1492153188.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:48.798Z,1492153188.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:49.182Z,1492153189.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:49.197Z,1492153189.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:49.602Z,1492153189.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:49.655Z,1492153189.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:49.973Z,1492153189.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:50.000Z,1492153190.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:50.369Z,1492153190.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:50.402Z,1492153190.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:50.784Z,1492153190.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:50.805Z,1492153190.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:51.169Z,1492153191.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:51.204Z,1492153191.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:51.569Z,1492153191.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:51.601Z,1492153191.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:51.991Z,1492153191.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:52.007Z,1492153192.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:52.379Z,1492153192.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:52.406Z,1492153192.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:52.770Z,1492153192.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:52.804Z,1492153192.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:53.168Z,1492153193.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:53.192Z,1492153193.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:53.572Z,1492153193.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:53.616Z,1492153193.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:53.985Z,1492153193.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:54.023Z,1492153194.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:54.376Z,1492153194.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:54.392Z,1492153194.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:54.777Z,1492153194.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:54.793Z,1492153194.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:55.182Z,1492153195.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:55.237Z,1492153195.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:55.582Z,1492153195.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:55.642Z,1492153195.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:55.971Z,1492153195.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:56.050Z,1492153196.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:56.373Z,1492153196.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:56.410Z,1492153196.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:56.771Z,1492153196.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:56.828Z,1492153196.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:57.176Z,1492153197.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:57.192Z,1492153197.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:57.614Z,1492153197.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:57.661Z,1492153197.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:57.989Z,1492153197.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:58.013Z,1492153198.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:58.371Z,1492153198.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:58.427Z,1492153198.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:58.769Z,1492153198.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:58.811Z,1492153198.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:59.169Z,1492153199.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:59.249Z,1492153199.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:59.585Z,1492153199.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T06:59:59.614Z,1492153199.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T06:59:59.981Z,1492153199.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:00.027Z,1492153200.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:00.374Z,1492153200.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:00.390Z,1492153200.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:00.776Z,1492153200.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:00.819Z,1492153200.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:01.177Z,1492153201.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:01.226Z,1492153201.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:01.581Z,1492153201.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:01.622Z,1492153201.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:01.973Z,1492153201.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:01.994Z,1492153201.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:02.377Z,1492153202.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:02.392Z,1492153202.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:02.776Z,1492153202.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:02.794Z,1492153202.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:03.178Z,1492153203.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:03.193Z,1492153203.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:03.592Z,1492153203.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:03.632Z,1492153203.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:03.969Z,1492153203.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:04.010Z,1492153204.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:04.382Z,1492153204.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:04.402Z,1492153204.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:04.783Z,1492153204.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:04.799Z,1492153204.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:05.169Z,1492153205.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:05.202Z,1492153205.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:05.573Z,1492153205.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:05.602Z,1492153205.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:05.969Z,1492153205.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:06.009Z,1492153206.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:06.386Z,1492153206.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:06.426Z,1492153206.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:06.769Z,1492153206.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:06.807Z,1492153206.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:07.169Z,1492153207.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:07.201Z,1492153207.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:07.570Z,1492153207.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:07.585Z,1492153207.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:07.969Z,1492153207.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:07.990Z,1492153207.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:08.377Z,1492153208.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:08.392Z,1492153208.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:08.778Z,1492153208.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:08.794Z,1492153208.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:09.172Z,1492153209.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:09.204Z,1492153209.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:09.576Z,1492153209.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:09.598Z,1492153209.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:09.969Z,1492153209.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:10.006Z,1492153210.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:10.407Z,1492153210.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:10.427Z,1492153210.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:10.777Z,1492153210.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:10.803Z,1492153210.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:11.171Z,1492153211.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:11.211Z,1492153211.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:11.576Z,1492153211.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:11.604Z,1492153211.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:11.969Z,1492153211.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:12.001Z,1492153212.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:12.371Z,1492153212.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:12.426Z,1492153212.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:12.771Z,1492153212.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:12.786Z,1492153212.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:13.170Z,1492153213.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:13.186Z,1492153213.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:13.598Z,1492153213.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:13.654Z,1492153213.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:13.989Z,1492153213.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:14.022Z,1492153214.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:14.377Z,1492153214.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:14.415Z,1492153214.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:14.776Z,1492153214.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:14.826Z,1492153214.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:15.178Z,1492153215.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:15.194Z,1492153215.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:15.577Z,1492153215.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:15.622Z,1492153215.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:15.978Z,1492153215.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:15.994Z,1492153215.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:16.378Z,1492153216.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:16.398Z,1492153216.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:16.771Z,1492153216.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:16.786Z,1492153216.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:17.176Z,1492153217.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:17.198Z,1492153217.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:17.582Z,1492153217.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:17.614Z,1492153217.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:17.970Z,1492153217.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:18.002Z,1492153218.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:18.369Z,1492153218.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:18.396Z,1492153218.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:18.790Z,1492153218.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:18.806Z,1492153218.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:19.167Z,1492153219.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:19.201Z,1492153219.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:19.567Z,1492153219.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:19.602Z,1492153219.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:20.002Z,1492153220.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:20.044Z,1492153220.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:20.373Z,1492153220.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:20.412Z,1492153220.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:20.771Z,1492153220.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:20.787Z,1492153220.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:21.177Z,1492153221.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:21.198Z,1492153221.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:21.579Z,1492153221.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:21.595Z,1492153221.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:21.977Z,1492153221.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:21.993Z,1492153221.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:22.378Z,1492153222.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:22.394Z,1492153222.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:22.777Z,1492153222.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:22.798Z,1492153222.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:23.177Z,1492153223.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:23.198Z,1492153223.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:23.587Z,1492153223.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:23.603Z,1492153223.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:23.982Z,1492153223.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:23.998Z,1492153223.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:24.381Z,1492153224.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:24.397Z,1492153224.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:24.786Z,1492153224.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:24.802Z,1492153224.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:25.169Z,1492153225.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:25.202Z,1492153225.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:25.569Z,1492153225.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:25.596Z,1492153225.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:25.986Z,1492153225.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:26.057Z,1492153226.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:26.381Z,1492153226.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:26.396Z,1492153226.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:26.769Z,1492153226.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:26.797Z,1492153226.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:27.190Z,1492153227.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:27.259Z,1492153227.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:27.569Z,1492153227.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:27.597Z,1492153227.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:27.973Z,1492153227.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:28.002Z,1492153228.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:28.386Z,1492153228.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:28.445Z,1492153228.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:28.770Z,1492153228.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:28.797Z,1492153228.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:29.171Z,1492153229.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:29.236Z,1492153229.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:29.608Z,1492153229.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:29.661Z,1492153229.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:29.972Z,1492153229.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:30.019Z,1492153230.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:30.372Z,1492153230.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:30.421Z,1492153230.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:33.937Z,1492153233.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:33.952Z,1492153233.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:34.069Z,1492153234.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:34.117Z,1492153234.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:34.438Z,1492153234.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:34.454Z,1492153234.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:34.838Z,1492153234.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:34.854Z,1492153234.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:35.240Z,1492153235.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:35.255Z,1492153235.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:35.641Z,1492153235.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:35.657Z,1492153235.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:36.043Z,1492153236.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:36.064Z,1492153236.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:36.439Z,1492153236.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:36.456Z,1492153236.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:36.841Z,1492153236.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:36.862Z,1492153236.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:37.249Z,1492153237.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:37.264Z,1492153237.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:37.639Z,1492153237.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:37.661Z,1492153237.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:38.041Z,1492153238.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:38.058Z,1492153238.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:38.436Z,1492153238.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:38.469Z,1492153238.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:38.845Z,1492153238.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:38.867Z,1492153238.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:39.233Z,1492153239.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:39.267Z,1492153239.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:39.642Z,1492153239.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:39.661Z,1492153239.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:40.033Z,1492153240.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:40.066Z,1492153240.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:40.433Z,1492153240.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:40.480Z,1492153240.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:40.833Z,1492153240.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:40.870Z,1492153240.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:41.237Z,1492153241.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:41.264Z,1492153241.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:41.642Z,1492153241.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:41.709Z,1492153241.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:42.040Z,1492153242.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:42.056Z,1492153242.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:42.440Z,1492153242.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:42.456Z,1492153242.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:42.841Z,1492153242.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:42.898Z,1492153242.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:43.245Z,1492153243.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:43.260Z,1492153243.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:43.642Z,1492153243.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:43.698Z,1492153243.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:44.038Z,1492153244.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:44.082Z,1492153244.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:44.441Z,1492153244.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:44.456Z,1492153244.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:44.842Z,1492153244.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:44.863Z,1492153244.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:45.235Z,1492153245.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:45.327Z,1492153245.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:45.636Z,1492153245.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:45.674Z,1492153245.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:46.035Z,1492153246.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:46.079Z,1492153246.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:46.435Z,1492153246.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:46.480Z,1492153246.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:46.839Z,1492153246.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:46.854Z,1492153246.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:47.237Z,1492153247.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:47.254Z,1492153247.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:47.640Z,1492153247.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:47.665Z,1492153247.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:48.079Z,1492153248.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:48.094Z,1492153248.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:48.441Z,1492153248.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:48.457Z,1492153248.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:48.845Z,1492153248.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:48.866Z,1492153248.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:49.241Z,1492153249.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:49.256Z,1492153249.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:49.630Z,1492153249.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:49.667Z,1492153249.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:50.046Z,1492153250.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:50.066Z,1492153250.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:50.445Z,1492153250.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:50.460Z,1492153250.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:50.833Z,1492153250.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:50.860Z,1492153250.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:51.237Z,1492153251.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:51.270Z,1492153251.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:51.634Z,1492153251.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:51.669Z,1492153251.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:52.037Z,1492153252.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:52.069Z,1492153252.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:52.437Z,1492153252.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:52.478Z,1492153252.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:52.837Z,1492153252.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:52.877Z,1492153252.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:53.238Z,1492153253.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:53.254Z,1492153253.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:53.642Z,1492153253.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:53.658Z,1492153253.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:54.042Z,1492153254.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:54.062Z,1492153254.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:54.442Z,1492153254.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:54.466Z,1492153254.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:54.850Z,1492153254.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:54.865Z,1492153254.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:55.245Z,1492153255.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:55.254Z,1492153255.254 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T07:00:55.254Z,1492153255.254 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:00:55.254Z,1492153255.254 [BPC1](ERROR): Data Fault
2017-04-14T07:00:55.263Z,1492153255.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:55.299Z,1492153255.299 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:00:55.639Z,1492153255.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:55.668Z,1492153255.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:56.042Z,1492153256.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:56.058Z,1492153256.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:56.445Z,1492153256.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:56.466Z,1492153256.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:56.516Z,1492153256.516 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:00:56.516Z,1492153256.516 [BPC1] No Fault, FailCount= 1
2017-04-14T07:00:56.830Z,1492153256.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:56.918Z,1492153256.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:57.233Z,1492153257.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:57.283Z,1492153257.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:57.645Z,1492153257.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:57.683Z,1492153257.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:58.042Z,1492153258.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:58.058Z,1492153258.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:58.442Z,1492153258.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:58.457Z,1492153258.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:58.845Z,1492153258.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:58.861Z,1492153258.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:59.245Z,1492153259.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:59.261Z,1492153259.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:00:59.633Z,1492153259.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:00:59.667Z,1492153259.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:00.046Z,1492153260.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:00.062Z,1492153260.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:00.433Z,1492153260.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:00.460Z,1492153260.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:00.833Z,1492153260.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:00.868Z,1492153260.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:01.233Z,1492153261.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:01.266Z,1492153261.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:01.653Z,1492153261.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:01.674Z,1492153261.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:02.041Z,1492153262.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:02.057Z,1492153262.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:02.441Z,1492153262.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:02.462Z,1492153262.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:02.842Z,1492153262.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:02.858Z,1492153262.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:03.240Z,1492153263.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:03.256Z,1492153263.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:03.645Z,1492153263.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:03.661Z,1492153263.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:04.041Z,1492153264.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:04.057Z,1492153264.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:04.445Z,1492153264.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:04.462Z,1492153264.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:04.846Z,1492153264.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:04.873Z,1492153264.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:05.237Z,1492153265.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:05.264Z,1492153265.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:05.649Z,1492153265.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:05.679Z,1492153265.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:06.041Z,1492153266.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:06.058Z,1492153266.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:06.442Z,1492153266.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:06.462Z,1492153266.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:06.837Z,1492153266.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:06.870Z,1492153266.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:07.245Z,1492153267.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:07.262Z,1492153267.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:07.633Z,1492153267.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:07.669Z,1492153267.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:08.033Z,1492153268.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:08.067Z,1492153268.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:08.444Z,1492153268.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:08.465Z,1492153268.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:08.833Z,1492153268.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:08.868Z,1492153268.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:09.250Z,1492153269.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:09.360Z,1492153269.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:09.638Z,1492153269.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:09.690Z,1492153269.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:10.042Z,1492153270.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:10.058Z,1492153270.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:10.443Z,1492153270.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:10.490Z,1492153270.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:10.847Z,1492153270.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:10.863Z,1492153270.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:11.242Z,1492153271.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:11.356Z,1492153271.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:11.638Z,1492153271.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:11.693Z,1492153271.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:12.036Z,1492153272.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:12.052Z,1492153272.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:12.443Z,1492153272.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:12.459Z,1492153272.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:12.841Z,1492153272.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:12.859Z,1492153272.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:12.859Z,1492153272.859 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:01:12.859Z,1492153272.859 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:01:12.865Z,1492153272.865 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:12.866Z,1492153272.866 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:01:12.866Z,1492153272.866 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:01:12.913Z,1492153272.913 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:01:12.913Z,1492153272.913 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:01:13.242Z,1492153273.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:13.291Z,1492153273.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:01:13.292Z,1492153273.292 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:01:13.292Z,1492153273.292 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:01:13.292Z,1492153273.292 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:01:13.640Z,1492153273.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:13.665Z,1492153273.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:01:13.665Z,1492153273.665 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:01:13.665Z,1492153273.665 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:01:13.670Z,1492153273.671 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:01:13.671Z,1492153273.671 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:01:13.672Z,1492153273.672 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:01:14.033Z,1492153274.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:14.070Z,1492153274.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:14.433Z,1492153274.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:14.461Z,1492153274.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:14.833Z,1492153274.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:14.872Z,1492153274.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:15.233Z,1492153275.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:15.260Z,1492153275.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:15.641Z,1492153275.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:15.675Z,1492153275.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:16.041Z,1492153276.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:16.056Z,1492153276.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:16.440Z,1492153276.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:16.456Z,1492153276.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:16.839Z,1492153276.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:16.854Z,1492153276.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:17.249Z,1492153277.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:17.265Z,1492153277.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:17.633Z,1492153277.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:17.666Z,1492153277.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:18.037Z,1492153278.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:18.052Z,1492153278.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:18.445Z,1492153278.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:18.482Z,1492153278.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:18.841Z,1492153278.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:18.857Z,1492153278.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:19.240Z,1492153279.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:19.256Z,1492153279.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:19.633Z,1492153279.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:19.666Z,1492153279.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:20.033Z,1492153280.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:20.072Z,1492153280.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:20.445Z,1492153280.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:20.466Z,1492153280.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:20.845Z,1492153280.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:20.861Z,1492153280.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:21.233Z,1492153281.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:21.337Z,1492153281.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:21.652Z,1492153281.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:21.668Z,1492153281.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:22.033Z,1492153282.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:22.066Z,1492153282.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:22.433Z,1492153282.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:22.467Z,1492153282.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:22.833Z,1492153282.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:22.873Z,1492153282.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:23.232Z,1492153283.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:23.325Z,1492153283.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:23.645Z,1492153283.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:23.690Z,1492153283.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:24.038Z,1492153284.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:24.101Z,1492153284.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:24.441Z,1492153284.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:24.473Z,1492153284.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:24.837Z,1492153284.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:24.898Z,1492153284.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:25.235Z,1492153285.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:25.250Z,1492153285.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:25.636Z,1492153285.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:25.689Z,1492153285.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:26.040Z,1492153286.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:26.084Z,1492153286.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:26.445Z,1492153286.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:26.460Z,1492153286.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:26.845Z,1492153286.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:26.868Z,1492153286.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:27.236Z,1492153287.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:27.268Z,1492153287.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:27.642Z,1492153287.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:27.658Z,1492153287.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:28.045Z,1492153288.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:28.061Z,1492153288.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:28.433Z,1492153288.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:28.468Z,1492153288.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:28.833Z,1492153288.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:28.865Z,1492153288.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:29.237Z,1492153289.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:29.264Z,1492153289.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:29.653Z,1492153289.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:29.669Z,1492153289.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:30.033Z,1492153290.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:30.048Z,1492153290.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:30.437Z,1492153290.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:30.458Z,1492153290.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:34.145Z,1492153294.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:34.168Z,1492153294.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:34.271Z,1492153294.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:34.300Z,1492153294.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:34.665Z,1492153294.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:34.686Z,1492153294.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:35.069Z,1492153295.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:35.085Z,1492153295.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:35.463Z,1492153295.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:35.493Z,1492153295.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:35.870Z,1492153295.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:35.887Z,1492153295.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:36.275Z,1492153296.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:36.292Z,1492153296.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:36.674Z,1492153296.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:36.691Z,1492153296.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:37.057Z,1492153297.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:37.090Z,1492153297.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:37.457Z,1492153297.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:37.484Z,1492153297.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:37.857Z,1492153297.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:37.891Z,1492153297.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:38.269Z,1492153298.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:38.347Z,1492153298.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:38.657Z,1492153298.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:38.680Z,1492153298.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:39.057Z,1492153299.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:39.094Z,1492153299.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:39.457Z,1492153299.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:39.514Z,1492153299.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:39.854Z,1492153299.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:39.892Z,1492153299.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:40.257Z,1492153300.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:40.306Z,1492153300.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:40.661Z,1492153300.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:40.707Z,1492153300.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:41.057Z,1492153301.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:41.095Z,1492153301.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:41.457Z,1492153301.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:41.494Z,1492153301.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:41.860Z,1492153301.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:41.894Z,1492153301.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:42.261Z,1492153302.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:42.294Z,1492153302.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:42.584Z,1492153302.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:42.661Z,1492153302.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:42.695Z,1492153302.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:43.057Z,1492153303.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:43.096Z,1492153303.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:43.380Z,1492153303.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:43.461Z,1492153303.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:43.494Z,1492153303.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:43.857Z,1492153303.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:43.895Z,1492153303.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:44.257Z,1492153304.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:44.296Z,1492153304.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:44.651Z,1492153304.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:44.666Z,1492153304.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:45.057Z,1492153305.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:45.094Z,1492153305.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:45.465Z,1492153305.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:45.486Z,1492153305.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:45.865Z,1492153305.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:45.881Z,1492153305.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:46.266Z,1492153306.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:46.282Z,1492153306.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:46.665Z,1492153306.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:46.681Z,1492153306.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:47.064Z,1492153307.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:47.080Z,1492153307.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:47.465Z,1492153307.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:47.487Z,1492153307.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:47.870Z,1492153307.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:47.886Z,1492153307.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:48.269Z,1492153308.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:48.290Z,1492153308.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:48.666Z,1492153308.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:48.682Z,1492153308.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:49.085Z,1492153309.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:49.107Z,1492153309.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:49.457Z,1492153309.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:49.490Z,1492153309.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:49.864Z,1492153309.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:49.892Z,1492153309.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:50.257Z,1492153310.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:50.290Z,1492153310.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:50.661Z,1492153310.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:50.688Z,1492153310.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:51.060Z,1492153311.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:51.094Z,1492153311.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:51.481Z,1492153311.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:51.538Z,1492153311.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:51.867Z,1492153311.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:51.895Z,1492153311.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:52.268Z,1492153312.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:52.292Z,1492153312.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:52.666Z,1492153312.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:52.757Z,1492153312.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:53.057Z,1492153313.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:53.090Z,1492153313.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:53.457Z,1492153313.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:53.509Z,1492153313.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:53.860Z,1492153313.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:53.894Z,1492153313.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:54.261Z,1492153314.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:54.341Z,1492153314.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:54.659Z,1492153314.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:54.702Z,1492153314.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:55.057Z,1492153315.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:55.094Z,1492153315.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:55.496Z,1492153315.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:55.512Z,1492153315.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:55.866Z,1492153315.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:55.882Z,1492153315.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:56.297Z,1492153316.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:56.318Z,1492153316.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:56.659Z,1492153316.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:56.694Z,1492153316.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:57.059Z,1492153317.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:57.094Z,1492153317.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:57.457Z,1492153317.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:57.499Z,1492153317.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:57.857Z,1492153317.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:57.872Z,1492153317.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:58.300Z,1492153318.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:58.328Z,1492153318.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:58.670Z,1492153318.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:58.686Z,1492153318.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:59.066Z,1492153319.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:59.081Z,1492153319.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:59.466Z,1492153319.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:59.484Z,1492153319.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:01:59.863Z,1492153319.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:01:59.903Z,1492153319.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:00.257Z,1492153320.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:00.294Z,1492153320.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:00.661Z,1492153320.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:00.688Z,1492153320.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:01.057Z,1492153321.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:01.089Z,1492153321.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:01.457Z,1492153321.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:01.513Z,1492153321.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:01.857Z,1492153321.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:01.890Z,1492153321.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:02.257Z,1492153322.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:02.285Z,1492153322.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:02.662Z,1492153322.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:02.690Z,1492153322.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:03.062Z,1492153323.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:03.082Z,1492153323.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:03.473Z,1492153323.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:03.516Z,1492153323.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:03.862Z,1492153323.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:03.877Z,1492153323.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:04.265Z,1492153324.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:04.281Z,1492153324.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:04.670Z,1492153324.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:04.690Z,1492153324.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:05.065Z,1492153325.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:05.081Z,1492153325.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:05.468Z,1492153325.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:05.497Z,1492153325.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:05.857Z,1492153325.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:05.894Z,1492153325.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:06.257Z,1492153326.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:06.293Z,1492153326.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:06.667Z,1492153326.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:06.734Z,1492153326.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:07.065Z,1492153327.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:07.127Z,1492153327.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:07.471Z,1492153327.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:07.523Z,1492153327.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:07.859Z,1492153327.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:07.930Z,1492153327.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:08.257Z,1492153328.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:08.294Z,1492153328.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:08.655Z,1492153328.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:08.698Z,1492153328.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:09.060Z,1492153329.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:09.124Z,1492153329.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:09.486Z,1492153329.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:09.510Z,1492153329.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:09.909Z,1492153329.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:09.933Z,1492153329.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:10.258Z,1492153330.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:10.286Z,1492153330.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:10.666Z,1492153330.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:10.698Z,1492153330.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:11.062Z,1492153331.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:11.078Z,1492153331.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:11.465Z,1492153331.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:11.513Z,1492153331.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:11.864Z,1492153331.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:11.886Z,1492153331.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:12.270Z,1492153332.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:12.291Z,1492153332.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:12.666Z,1492153332.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:12.683Z,1492153332.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:13.057Z,1492153333.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:13.084Z,1492153333.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:13.484Z,1492153333.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:13.532Z,1492153333.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:13.859Z,1492153333.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:13.894Z,1492153333.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:14.259Z,1492153334.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:14.314Z,1492153334.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:14.651Z,1492153334.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:14.666Z,1492153334.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:15.057Z,1492153335.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:15.072Z,1492153335.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:15.462Z,1492153335.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:15.486Z,1492153335.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:15.877Z,1492153335.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:15.915Z,1492153335.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:16.266Z,1492153336.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:16.282Z,1492153336.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:16.707Z,1492153336.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:16.736Z,1492153336.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:17.065Z,1492153337.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:17.091Z,1492153337.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:17.465Z,1492153337.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:17.502Z,1492153337.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:17.883Z,1492153337.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:17.949Z,1492153337.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:18.279Z,1492153338.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:18.333Z,1492153338.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:18.670Z,1492153338.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:18.688Z,1492153338.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:19.070Z,1492153339.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:19.086Z,1492153339.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:19.465Z,1492153339.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:19.486Z,1492153339.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:19.866Z,1492153339.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:19.882Z,1492153339.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:20.274Z,1492153340.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:20.290Z,1492153340.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:20.667Z,1492153340.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:20.690Z,1492153340.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:21.071Z,1492153341.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:21.137Z,1492153341.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:21.482Z,1492153341.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:21.541Z,1492153341.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:21.893Z,1492153341.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:21.910Z,1492153341.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:22.261Z,1492153342.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:22.294Z,1492153342.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:22.664Z,1492153342.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:22.711Z,1492153342.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:23.065Z,1492153343.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:23.107Z,1492153343.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:23.478Z,1492153343.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:23.548Z,1492153343.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:23.864Z,1492153343.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:23.897Z,1492153343.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:24.265Z,1492153344.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:24.315Z,1492153344.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:24.350Z,1492153344.350 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:02:24.665Z,1492153344.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:24.681Z,1492153344.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:25.065Z,1492153345.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:25.081Z,1492153345.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:25.459Z,1492153345.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:25.475Z,1492153345.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:25.866Z,1492153345.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:25.882Z,1492153345.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:26.265Z,1492153346.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:26.281Z,1492153346.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:26.665Z,1492153346.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:26.680Z,1492153346.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:27.069Z,1492153347.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:27.085Z,1492153347.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:27.469Z,1492153347.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:27.484Z,1492153347.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:27.865Z,1492153347.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:27.881Z,1492153347.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:28.274Z,1492153348.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:28.290Z,1492153348.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:28.670Z,1492153348.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:28.685Z,1492153348.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:29.054Z,1492153349.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:29.089Z,1492153349.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:29.466Z,1492153349.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:29.482Z,1492153349.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:29.870Z,1492153349.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:29.886Z,1492153349.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:30.263Z,1492153350.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:30.287Z,1492153350.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:30.665Z,1492153350.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:30.682Z,1492153350.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:34.176Z,1492153354.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:34.198Z,1492153354.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:34.322Z,1492153354.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:34.366Z,1492153354.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:34.701Z,1492153354.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:34.721Z,1492153354.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:34.758Z,1492153354.758 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:34.758Z,1492153354.759 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:02:34.759Z,1492153354.759 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:02:34.816Z,1492153354.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:02:35.105Z,1492153355.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:35.122Z,1492153355.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:35.215Z,1492153355.215 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:02:35.215Z,1492153355.216 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:02:35.493Z,1492153355.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:35.520Z,1492153355.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:35.526Z,1492153355.526 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:02:35.526Z,1492153355.526 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:02:35.527Z,1492153355.527 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:02:35.914Z,1492153355.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:35.985Z,1492153355.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:36.293Z,1492153356.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:36.339Z,1492153356.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:36.693Z,1492153356.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:36.717Z,1492153356.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:37.097Z,1492153357.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:37.150Z,1492153357.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:37.493Z,1492153357.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:37.530Z,1492153357.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:37.891Z,1492153357.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:37.942Z,1492153357.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:38.294Z,1492153358.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:38.335Z,1492153358.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:38.690Z,1492153358.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:38.706Z,1492153358.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:39.101Z,1492153359.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:39.133Z,1492153359.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:39.501Z,1492153359.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:39.517Z,1492153359.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:39.901Z,1492153359.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:39.926Z,1492153359.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:40.305Z,1492153360.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:40.321Z,1492153360.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:40.705Z,1492153360.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:40.721Z,1492153360.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:41.100Z,1492153361.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:41.126Z,1492153361.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:41.502Z,1492153361.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:41.517Z,1492153361.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:41.897Z,1492153361.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:41.920Z,1492153361.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:42.302Z,1492153362.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:42.322Z,1492153362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:42.687Z,1492153362.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:42.723Z,1492153362.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:43.106Z,1492153363.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:43.122Z,1492153363.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:43.493Z,1492153363.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:43.508Z,1492153363.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:43.908Z,1492153363.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:43.940Z,1492153363.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:44.299Z,1492153364.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:44.315Z,1492153364.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:44.702Z,1492153364.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:44.718Z,1492153364.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:45.101Z,1492153365.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:45.117Z,1492153365.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:45.493Z,1492153365.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:45.526Z,1492153365.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:45.893Z,1492153365.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:45.922Z,1492153365.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:46.293Z,1492153366.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:46.330Z,1492153366.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:46.697Z,1492153366.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:46.730Z,1492153366.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:47.101Z,1492153367.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:47.127Z,1492153367.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:47.506Z,1492153367.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:47.536Z,1492153367.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:47.902Z,1492153367.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:47.918Z,1492153367.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:48.303Z,1492153368.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:48.319Z,1492153368.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:48.704Z,1492153368.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:48.720Z,1492153368.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:49.104Z,1492153369.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:49.120Z,1492153369.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:49.493Z,1492153369.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:49.528Z,1492153369.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:49.912Z,1492153369.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:49.928Z,1492153369.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:50.294Z,1492153370.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:50.378Z,1492153370.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:50.693Z,1492153370.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:50.709Z,1492153370.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:51.099Z,1492153371.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:51.154Z,1492153371.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:51.502Z,1492153371.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:51.517Z,1492153371.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:51.913Z,1492153371.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:51.950Z,1492153371.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:52.304Z,1492153372.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:52.357Z,1492153372.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:52.703Z,1492153372.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:52.719Z,1492153372.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:53.102Z,1492153373.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:53.118Z,1492153373.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:53.505Z,1492153373.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:53.522Z,1492153373.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:53.893Z,1492153373.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:53.931Z,1492153373.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:54.044Z,1492153374.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:54.297Z,1492153374.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:54.324Z,1492153374.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:54.693Z,1492153374.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:54.723Z,1492153374.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:54.840Z,1492153374.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:55.093Z,1492153375.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:55.122Z,1492153375.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:55.493Z,1492153375.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:55.519Z,1492153375.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:55.897Z,1492153375.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:55.914Z,1492153375.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:56.302Z,1492153376.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:56.325Z,1492153376.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:56.704Z,1492153376.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:56.720Z,1492153376.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:57.098Z,1492153377.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:57.157Z,1492153377.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:57.493Z,1492153377.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:57.525Z,1492153377.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:57.908Z,1492153377.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:57.923Z,1492153377.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:58.293Z,1492153378.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:58.320Z,1492153378.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:58.693Z,1492153378.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:58.727Z,1492153378.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:59.093Z,1492153379.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:59.188Z,1492153379.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:59.493Z,1492153379.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:59.526Z,1492153379.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:02:59.897Z,1492153379.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:02:59.930Z,1492153379.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:00.297Z,1492153380.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:00.330Z,1492153380.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:00.697Z,1492153380.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:00.733Z,1492153380.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:01.097Z,1492153381.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:01.168Z,1492153381.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:01.511Z,1492153381.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:01.527Z,1492153381.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:01.936Z,1492153381.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:01.957Z,1492153381.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:02.318Z,1492153382.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:02.370Z,1492153382.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:02.695Z,1492153382.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:02.735Z,1492153382.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:03.100Z,1492153383.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:03.209Z,1492153383.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:03.512Z,1492153383.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:03.550Z,1492153383.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:03.904Z,1492153383.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:03.929Z,1492153383.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:04.305Z,1492153384.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:04.382Z,1492153384.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:04.693Z,1492153384.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:04.728Z,1492153384.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:05.105Z,1492153385.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:05.146Z,1492153385.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:05.493Z,1492153385.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:05.530Z,1492153385.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:05.900Z,1492153385.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:05.950Z,1492153385.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:06.298Z,1492153386.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:06.313Z,1492153386.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:06.690Z,1492153386.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:06.748Z,1492153386.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:07.093Z,1492153387.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:07.108Z,1492153387.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:07.502Z,1492153387.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:07.546Z,1492153387.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:07.893Z,1492153387.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:07.920Z,1492153387.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:08.293Z,1492153388.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:08.319Z,1492153388.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:08.697Z,1492153388.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:08.723Z,1492153388.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:09.097Z,1492153389.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:09.124Z,1492153389.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:09.493Z,1492153389.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:09.525Z,1492153389.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:09.904Z,1492153389.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:09.919Z,1492153389.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:10.300Z,1492153390.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:10.316Z,1492153390.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:10.701Z,1492153390.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:10.722Z,1492153390.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:11.162Z,1492153391.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:11.202Z,1492153391.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:11.498Z,1492153391.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:11.514Z,1492153391.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:11.904Z,1492153391.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:11.919Z,1492153391.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:12.306Z,1492153392.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:12.321Z,1492153392.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:12.709Z,1492153392.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:12.725Z,1492153392.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:13.118Z,1492153393.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:13.193Z,1492153393.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:13.509Z,1492153393.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:13.530Z,1492153393.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:13.893Z,1492153393.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:13.920Z,1492153393.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:14.293Z,1492153394.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:14.319Z,1492153394.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:14.693Z,1492153394.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:14.720Z,1492153394.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:15.147Z,1492153395.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:15.178Z,1492153395.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:15.493Z,1492153395.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:15.530Z,1492153395.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:15.897Z,1492153395.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:15.930Z,1492153395.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:16.297Z,1492153396.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:16.333Z,1492153396.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:16.710Z,1492153396.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:16.733Z,1492153396.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:17.143Z,1492153397.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:17.194Z,1492153397.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:17.505Z,1492153397.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:17.546Z,1492153397.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:17.905Z,1492153397.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:17.920Z,1492153397.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:18.301Z,1492153398.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:18.322Z,1492153398.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:18.698Z,1492153398.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:18.785Z,1492153398.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:19.100Z,1492153399.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:19.116Z,1492153399.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:19.493Z,1492153399.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:19.566Z,1492153399.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:19.917Z,1492153399.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:19.932Z,1492153399.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:20.293Z,1492153400.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:20.346Z,1492153400.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:20.697Z,1492153400.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:20.753Z,1492153400.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:21.094Z,1492153401.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:21.122Z,1492153401.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:21.497Z,1492153401.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:21.566Z,1492153401.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:21.907Z,1492153401.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:21.922Z,1492153401.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:22.306Z,1492153402.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:22.322Z,1492153402.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:22.710Z,1492153402.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:22.725Z,1492153402.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:23.105Z,1492153403.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:23.131Z,1492153403.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:23.494Z,1492153403.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:23.576Z,1492153403.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:23.902Z,1492153403.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:23.941Z,1492153403.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:24.293Z,1492153404.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:24.355Z,1492153404.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:24.701Z,1492153404.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:24.733Z,1492153404.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:25.169Z,1492153405.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:25.186Z,1492153405.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:25.496Z,1492153405.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:25.529Z,1492153405.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:25.894Z,1492153405.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:25.938Z,1492153405.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:26.296Z,1492153406.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:26.342Z,1492153406.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:26.701Z,1492153406.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:26.733Z,1492153406.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:27.199Z,1492153407.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:27.236Z,1492153407.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:27.530Z,1492153407.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:27.567Z,1492153407.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:27.905Z,1492153407.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:27.921Z,1492153407.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:28.303Z,1492153408.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:28.319Z,1492153408.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:28.707Z,1492153408.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:28.731Z,1492153408.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:29.164Z,1492153409.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:29.223Z,1492153409.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:29.501Z,1492153409.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:29.533Z,1492153409.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:29.921Z,1492153409.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:29.950Z,1492153409.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:30.303Z,1492153410.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:30.356Z,1492153410.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:30.401Z,1492153410.401 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:03:30.401Z,1492153410.401 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:03:30.401Z,1492153410.401 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:03:30.401Z,1492153410.401 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:03:30.702Z,1492153410.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:30.718Z,1492153410.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:30.748Z,1492153410.748 [Default:CheckIn:D] Stopped
2017-04-14T07:03:30.748Z,1492153410.748 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:03:34.301Z,1492153414.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:34.410Z,1492153414.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:34.420Z,1492153414.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 217.423812 min 
2017-04-14T07:03:34.420Z,1492153414.420 [Default:CheckIn:E] Stopped
2017-04-14T07:03:34.420Z,1492153414.420 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:03:34.420Z,1492153414.420 [Default:CheckIn] Stopped
2017-04-14T07:03:34.420Z,1492153414.420 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:03:34.421Z,1492153414.421 [Default:CheckIn](INFO): Running loop #31
2017-04-14T07:03:34.421Z,1492153414.421 [Default:CheckIn] Running Loop=31
2017-04-14T07:03:34.421Z,1492153414.421 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:03:34.421Z,1492153414.421 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:03:34.541Z,1492153414.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:34.562Z,1492153414.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:34.848Z,1492153414.848 [NAL9602](INFO): Powering up
2017-04-14T07:03:34.868Z,1492153414.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:34.903Z,1492153414.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:35.279Z,1492153415.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:35.334Z,1492153415.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:35.674Z,1492153415.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:35.689Z,1492153415.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:36.073Z,1492153416.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:36.126Z,1492153416.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:36.482Z,1492153416.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:36.537Z,1492153416.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:36.879Z,1492153416.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:36.897Z,1492153416.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:37.265Z,1492153417.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:37.298Z,1492153417.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:37.666Z,1492153417.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:37.694Z,1492153417.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:38.083Z,1492153418.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:38.098Z,1492153418.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:38.465Z,1492153418.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:38.492Z,1492153418.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:38.882Z,1492153418.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:38.898Z,1492153418.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:39.265Z,1492153419.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:39.293Z,1492153419.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:39.681Z,1492153419.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:39.702Z,1492153419.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:40.079Z,1492153420.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:40.096Z,1492153420.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:40.465Z,1492153420.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:40.493Z,1492153420.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:40.879Z,1492153420.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:40.902Z,1492153420.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:41.290Z,1492153421.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:41.307Z,1492153421.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:41.666Z,1492153421.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:41.702Z,1492153421.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:42.070Z,1492153422.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:42.097Z,1492153422.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:42.469Z,1492153422.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:42.497Z,1492153422.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:42.867Z,1492153422.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:42.906Z,1492153422.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:43.265Z,1492153423.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:43.300Z,1492153423.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:43.665Z,1492153423.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:43.698Z,1492153423.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:44.065Z,1492153424.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:44.102Z,1492153424.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:44.465Z,1492153424.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:44.496Z,1492153424.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:44.870Z,1492153424.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:44.898Z,1492153424.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:45.276Z,1492153425.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:45.304Z,1492153425.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:45.657Z,1492153425.657 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:03:45.674Z,1492153425.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:45.714Z,1492153425.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:46.073Z,1492153426.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:46.088Z,1492153426.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:46.484Z,1492153426.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:46.521Z,1492153426.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:46.880Z,1492153426.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:46.918Z,1492153426.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:47.278Z,1492153427.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:47.298Z,1492153427.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:47.678Z,1492153427.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:47.694Z,1492153427.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:48.073Z,1492153428.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:48.089Z,1492153428.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:48.474Z,1492153428.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:48.530Z,1492153428.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:48.877Z,1492153428.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:48.893Z,1492153428.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:49.283Z,1492153429.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:49.299Z,1492153429.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:49.675Z,1492153429.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:49.729Z,1492153429.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:50.068Z,1492153430.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:50.098Z,1492153430.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:50.477Z,1492153430.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:50.532Z,1492153430.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:50.876Z,1492153430.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:50.934Z,1492153430.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:51.273Z,1492153431.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:51.304Z,1492153431.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:51.699Z,1492153431.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:51.715Z,1492153431.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:52.073Z,1492153432.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:52.105Z,1492153432.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:52.471Z,1492153432.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:52.495Z,1492153432.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:52.869Z,1492153432.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:52.911Z,1492153432.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:53.270Z,1492153433.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:53.299Z,1492153433.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:53.671Z,1492153433.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:53.687Z,1492153433.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:54.075Z,1492153434.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:54.091Z,1492153434.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:54.476Z,1492153434.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:54.491Z,1492153434.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:54.874Z,1492153434.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:54.890Z,1492153434.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:55.273Z,1492153435.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:55.296Z,1492153435.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:55.674Z,1492153435.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:55.690Z,1492153435.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:56.075Z,1492153436.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:56.103Z,1492153436.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:56.467Z,1492153436.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:56.518Z,1492153436.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:56.878Z,1492153436.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:56.936Z,1492153436.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:57.291Z,1492153437.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:57.335Z,1492153437.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:57.670Z,1492153437.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:57.706Z,1492153437.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:58.065Z,1492153438.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:58.142Z,1492153438.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:58.493Z,1492153438.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:58.510Z,1492153438.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:58.895Z,1492153438.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:58.911Z,1492153438.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:59.301Z,1492153439.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:59.317Z,1492153439.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:03:59.675Z,1492153439.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:03:59.691Z,1492153439.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:00.081Z,1492153440.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:00.102Z,1492153440.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:00.482Z,1492153440.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:00.549Z,1492153440.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:00.874Z,1492153440.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:00.895Z,1492153440.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:01.275Z,1492153441.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:01.290Z,1492153441.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:01.674Z,1492153441.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:01.698Z,1492153441.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:02.108Z,1492153442.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:02.132Z,1492153442.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:02.465Z,1492153442.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:02.498Z,1492153442.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:02.869Z,1492153442.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:02.921Z,1492153442.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:03.269Z,1492153443.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:03.323Z,1492153443.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:03.655Z,1492153443.655 [NAL9602](INFO): SBD MO Status=0, MOMSN=2124, MT Status=0, MTMSN=0
2017-04-14T07:04:03.655Z,1492153443.655 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:04:03.672Z,1492153443.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:03.718Z,1492153443.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:04.073Z,1492153444.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:04.122Z,1492153444.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:04.484Z,1492153444.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:04.516Z,1492153444.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:04.884Z,1492153444.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:04.930Z,1492153444.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:05.287Z,1492153445.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:05.342Z,1492153445.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:05.681Z,1492153445.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:05.716Z,1492153445.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:06.077Z,1492153446.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:06.118Z,1492153446.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:06.470Z,1492153446.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:06.494Z,1492153446.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:06.876Z,1492153446.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:06.892Z,1492153446.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:07.274Z,1492153447.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:07.290Z,1492153447.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:07.687Z,1492153447.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:07.703Z,1492153447.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:08.088Z,1492153448.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:08.123Z,1492153448.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:08.483Z,1492153448.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:08.499Z,1492153448.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:08.872Z,1492153448.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:08.887Z,1492153448.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:09.282Z,1492153449.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:09.298Z,1492153449.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:09.678Z,1492153449.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:09.698Z,1492153449.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:10.079Z,1492153450.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:10.094Z,1492153450.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:10.482Z,1492153450.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:10.498Z,1492153450.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:10.892Z,1492153450.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:10.908Z,1492153450.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:11.253Z,1492153451.253 [NAL9602](INFO): GPS fix at 20170414T070430: (36.802297, -121.787126)
2017-04-14T07:04:11.283Z,1492153451.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:11.349Z,1492153451.349 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:04:11.349Z,1492153451.349 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:04:11.689Z,1492153451.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:11.706Z,1492153451.705 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:11.706Z,1492153451.706 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:04:11.706Z,1492153451.706 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:04:11.713Z,1492153451.713 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:11.713Z,1492153451.713 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:04:11.713Z,1492153451.713 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:04:11.749Z,1492153451.749 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:04:11.749Z,1492153451.749 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:04:12.077Z,1492153452.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:12.131Z,1492153452.131 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:04:12.131Z,1492153452.131 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:04:12.132Z,1492153452.132 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:04:12.132Z,1492153452.132 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:04:12.470Z,1492153452.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:12.525Z,1492153452.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:04:12.525Z,1492153452.525 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:04:12.526Z,1492153452.526 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:04:12.534Z,1492153452.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:04:12.534Z,1492153452.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:04:12.534Z,1492153452.534 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:04:16.507Z,1492153456.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:16.525Z,1492153456.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:16.609Z,1492153456.609 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0128.lzma
2017-04-14T07:04:16.634Z,1492153456.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:16.668Z,1492153456.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:17.001Z,1492153457.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:17.065Z,1492153457.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:17.377Z,1492153457.377 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0128.lzma.bak
2017-04-14T07:04:17.377Z,1492153457.378 [DataOverHttps](INFO): SBD MOMSN=4885398
2017-04-14T07:04:17.399Z,1492153457.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:17.554Z,1492153457.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:17.823Z,1492153457.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:17.850Z,1492153457.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:18.202Z,1492153458.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:18.253Z,1492153458.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:21.707Z,1492153461.707 [NAL9602](INFO): Powering down
2017-04-14T07:04:21.726Z,1492153461.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:21.764Z,1492153461.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:21.864Z,1492153461.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:21.928Z,1492153461.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:22.264Z,1492153462.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:22.314Z,1492153462.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:22.664Z,1492153462.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:22.680Z,1492153462.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:23.084Z,1492153463.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:23.137Z,1492153463.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:23.471Z,1492153463.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:23.487Z,1492153463.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:27.120Z,1492153467.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:27.154Z,1492153467.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:27.240Z,1492153467.240 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0129.lzma
2017-04-14T07:04:27.266Z,1492153467.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:27.302Z,1492153467.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:27.653Z,1492153467.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:27.674Z,1492153467.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:28.018Z,1492153468.018 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0129.lzma.bak
2017-04-14T07:04:28.018Z,1492153468.018 [DataOverHttps](INFO): SBD MOMSN=4885401
2017-04-14T07:04:28.060Z,1492153468.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:28.095Z,1492153468.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:28.465Z,1492153468.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:28.492Z,1492153468.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:28.514Z,1492153468.514 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:04:28.514Z,1492153468.514 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:04:28.514Z,1492153468.514 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:04:28.850Z,1492153468.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:28.917Z,1492153468.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:32.404Z,1492153472.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:32.420Z,1492153472.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:32.522Z,1492153472.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:32.565Z,1492153472.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:32.905Z,1492153472.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:32.921Z,1492153472.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:33.289Z,1492153473.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:33.313Z,1492153473.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:33.678Z,1492153473.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:33.694Z,1492153473.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:34.083Z,1492153474.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:34.120Z,1492153474.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:34.481Z,1492153474.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:34.565Z,1492153474.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:34.878Z,1492153474.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:34.894Z,1492153474.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:35.282Z,1492153475.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:35.326Z,1492153475.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:35.678Z,1492153475.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:35.694Z,1492153475.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:36.081Z,1492153476.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:36.134Z,1492153476.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:36.482Z,1492153476.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:36.531Z,1492153476.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:36.882Z,1492153476.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:36.937Z,1492153476.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:37.273Z,1492153477.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:37.312Z,1492153477.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:37.700Z,1492153477.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:37.726Z,1492153477.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:38.073Z,1492153478.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:38.094Z,1492153478.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:38.477Z,1492153478.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:38.522Z,1492153478.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:38.883Z,1492153478.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:38.898Z,1492153478.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:39.279Z,1492153479.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:39.306Z,1492153479.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:39.685Z,1492153479.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:39.709Z,1492153479.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:40.079Z,1492153480.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:40.106Z,1492153480.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:40.485Z,1492153480.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:40.501Z,1492153480.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:40.890Z,1492153480.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:40.906Z,1492153480.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:41.285Z,1492153481.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:41.311Z,1492153481.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:41.670Z,1492153481.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:41.686Z,1492153481.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:42.073Z,1492153482.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:42.089Z,1492153482.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:42.481Z,1492153482.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:42.517Z,1492153482.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:42.870Z,1492153482.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:42.905Z,1492153482.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:43.278Z,1492153483.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:43.294Z,1492153483.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:43.678Z,1492153483.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:43.693Z,1492153483.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:44.078Z,1492153484.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:44.093Z,1492153484.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:44.473Z,1492153484.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:44.500Z,1492153484.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:44.873Z,1492153484.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:44.941Z,1492153484.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:45.277Z,1492153485.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:45.489Z,1492153485.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:45.731Z,1492153485.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:45.800Z,1492153485.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:46.083Z,1492153486.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:46.145Z,1492153486.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:46.475Z,1492153486.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:46.506Z,1492153486.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:46.873Z,1492153486.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:46.910Z,1492153486.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:47.273Z,1492153487.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:47.310Z,1492153487.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:47.673Z,1492153487.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:47.716Z,1492153487.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:48.073Z,1492153488.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:48.114Z,1492153488.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:48.481Z,1492153488.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:48.578Z,1492153488.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:48.878Z,1492153488.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:48.894Z,1492153488.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:49.273Z,1492153489.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:49.316Z,1492153489.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:49.673Z,1492153489.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:49.726Z,1492153489.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:50.074Z,1492153490.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:50.112Z,1492153490.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:50.477Z,1492153490.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:50.526Z,1492153490.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:50.897Z,1492153490.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:51.000Z,1492153491.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:51.281Z,1492153491.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:51.296Z,1492153491.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:51.686Z,1492153491.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:51.702Z,1492153491.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:52.082Z,1492153492.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:52.097Z,1492153492.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:52.482Z,1492153492.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:52.498Z,1492153492.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:52.883Z,1492153492.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:52.899Z,1492153492.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:53.274Z,1492153493.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:53.306Z,1492153493.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:53.674Z,1492153493.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:53.710Z,1492153493.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:54.078Z,1492153494.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:54.105Z,1492153494.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:54.473Z,1492153494.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:54.506Z,1492153494.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:54.871Z,1492153494.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:54.895Z,1492153494.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:55.301Z,1492153495.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:55.322Z,1492153495.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:55.681Z,1492153495.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:55.720Z,1492153495.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:56.075Z,1492153496.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:56.090Z,1492153496.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:56.479Z,1492153496.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:56.495Z,1492153496.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:56.881Z,1492153496.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:56.896Z,1492153496.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:57.283Z,1492153497.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:57.306Z,1492153497.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:57.667Z,1492153497.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:57.695Z,1492153497.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:58.089Z,1492153498.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:58.110Z,1492153498.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:58.487Z,1492153498.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:58.502Z,1492153498.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:58.876Z,1492153498.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:58.905Z,1492153498.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:59.286Z,1492153499.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:59.303Z,1492153499.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:04:59.673Z,1492153499.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:04:59.709Z,1492153499.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:00.090Z,1492153500.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:00.109Z,1492153500.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:00.493Z,1492153500.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:00.558Z,1492153500.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:00.873Z,1492153500.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:00.907Z,1492153500.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:01.275Z,1492153501.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:01.320Z,1492153501.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:01.690Z,1492153501.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:01.706Z,1492153501.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:02.083Z,1492153502.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:02.114Z,1492153502.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:02.501Z,1492153502.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:02.561Z,1492153502.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:02.875Z,1492153502.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:03.030Z,1492153503.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:03.290Z,1492153503.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:03.322Z,1492153503.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:03.686Z,1492153503.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:03.717Z,1492153503.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:04.077Z,1492153504.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:04.130Z,1492153504.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:04.473Z,1492153504.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:04.488Z,1492153504.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:04.877Z,1492153504.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:05.010Z,1492153505.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:05.282Z,1492153505.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:05.334Z,1492153505.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:05.681Z,1492153505.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:05.696Z,1492153505.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:06.080Z,1492153506.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:06.096Z,1492153506.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:06.476Z,1492153506.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:06.505Z,1492153506.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:06.882Z,1492153506.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:06.898Z,1492153506.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:07.273Z,1492153507.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:07.310Z,1492153507.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:07.673Z,1492153507.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:07.734Z,1492153507.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:08.073Z,1492153508.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:08.088Z,1492153508.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:08.481Z,1492153508.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:08.497Z,1492153508.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:08.984Z,1492153508.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:09.025Z,1492153509.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:09.282Z,1492153509.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:09.298Z,1492153509.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:09.682Z,1492153509.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:09.698Z,1492153509.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:10.082Z,1492153510.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:10.097Z,1492153510.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:10.485Z,1492153510.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:10.501Z,1492153510.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:10.879Z,1492153510.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:10.900Z,1492153510.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:11.281Z,1492153511.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:11.297Z,1492153511.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:11.681Z,1492153511.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:11.698Z,1492153511.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:12.081Z,1492153512.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:12.097Z,1492153512.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:12.481Z,1492153512.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:12.502Z,1492153512.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:12.882Z,1492153512.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:12.936Z,1492153512.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:13.280Z,1492153513.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:13.306Z,1492153513.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:13.673Z,1492153513.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:13.709Z,1492153513.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:14.081Z,1492153514.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:14.108Z,1492153514.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:14.473Z,1492153514.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:14.509Z,1492153514.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:14.873Z,1492153514.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:14.910Z,1492153514.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:15.273Z,1492153515.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:15.310Z,1492153515.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:15.673Z,1492153515.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:15.694Z,1492153515.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:16.081Z,1492153516.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:16.118Z,1492153516.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:16.478Z,1492153516.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:16.494Z,1492153516.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:16.877Z,1492153516.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:16.965Z,1492153516.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:17.276Z,1492153517.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:17.338Z,1492153517.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:17.685Z,1492153517.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:17.726Z,1492153517.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:18.073Z,1492153518.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:18.112Z,1492153518.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:18.473Z,1492153518.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:18.526Z,1492153518.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:18.873Z,1492153518.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:18.971Z,1492153518.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:19.282Z,1492153519.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:19.334Z,1492153519.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:19.682Z,1492153519.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:19.742Z,1492153519.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:20.080Z,1492153520.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:20.096Z,1492153520.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:20.481Z,1492153520.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:20.496Z,1492153520.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:20.882Z,1492153520.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:20.951Z,1492153520.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:21.279Z,1492153521.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:21.299Z,1492153521.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:21.680Z,1492153521.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:21.696Z,1492153521.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:22.083Z,1492153522.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:22.099Z,1492153522.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:22.480Z,1492153522.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:22.496Z,1492153522.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:22.881Z,1492153522.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:22.963Z,1492153522.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:23.273Z,1492153523.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:23.310Z,1492153523.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:23.673Z,1492153523.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:23.697Z,1492153523.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:24.073Z,1492153524.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:24.135Z,1492153524.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:24.481Z,1492153524.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:24.512Z,1492153524.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:24.878Z,1492153524.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:24.906Z,1492153524.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:25.278Z,1492153525.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:25.307Z,1492153525.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:25.684Z,1492153525.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:25.726Z,1492153525.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:26.083Z,1492153526.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:26.100Z,1492153526.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:26.485Z,1492153526.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:26.504Z,1492153526.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:26.887Z,1492153526.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:26.904Z,1492153526.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:27.284Z,1492153527.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:27.310Z,1492153527.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:27.675Z,1492153527.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:27.730Z,1492153527.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:28.075Z,1492153528.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:28.117Z,1492153528.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:28.477Z,1492153528.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:28.511Z,1492153528.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:28.896Z,1492153528.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:28.925Z,1492153528.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:32.415Z,1492153532.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:32.504Z,1492153532.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:32.605Z,1492153532.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:32.653Z,1492153532.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:32.985Z,1492153532.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:33.055Z,1492153533.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:33.377Z,1492153533.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:33.421Z,1492153533.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:33.770Z,1492153533.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:33.823Z,1492153533.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:34.173Z,1492153534.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:34.234Z,1492153534.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:34.578Z,1492153534.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:34.614Z,1492153534.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:34.985Z,1492153534.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:35.083Z,1492153535.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:35.390Z,1492153535.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:35.406Z,1492153535.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:35.788Z,1492153535.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:35.825Z,1492153535.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:35.847Z,1492153535.847 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:35.848Z,1492153535.848 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:05:35.848Z,1492153535.848 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:05:35.886Z,1492153535.885 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:05:36.175Z,1492153536.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:36.228Z,1492153536.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:36.285Z,1492153536.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:05:36.285Z,1492153536.286 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:05:36.584Z,1492153536.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:36.628Z,1492153536.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:36.643Z,1492153536.643 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:05:36.644Z,1492153536.644 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:05:36.644Z,1492153536.644 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:05:36.997Z,1492153536.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:37.049Z,1492153537.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:37.373Z,1492153537.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:37.410Z,1492153537.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:37.785Z,1492153537.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:37.826Z,1492153537.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:38.182Z,1492153538.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:38.209Z,1492153538.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:38.584Z,1492153538.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:38.608Z,1492153538.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:39.034Z,1492153539.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:39.083Z,1492153539.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:39.373Z,1492153539.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:39.421Z,1492153539.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:39.771Z,1492153539.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:39.801Z,1492153539.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:40.184Z,1492153540.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:40.220Z,1492153540.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:40.582Z,1492153540.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:40.623Z,1492153540.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:40.979Z,1492153540.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:41.019Z,1492153541.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:41.419Z,1492153541.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:41.452Z,1492153541.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:41.801Z,1492153541.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:41.840Z,1492153541.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:42.182Z,1492153542.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:42.217Z,1492153542.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:42.589Z,1492153542.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:42.620Z,1492153542.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:43.012Z,1492153543.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:43.048Z,1492153543.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:43.398Z,1492153543.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:43.426Z,1492153543.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:43.786Z,1492153543.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:43.827Z,1492153543.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:44.194Z,1492153544.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:44.230Z,1492153544.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:44.587Z,1492153544.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:44.622Z,1492153544.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:44.990Z,1492153544.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:45.023Z,1492153545.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:45.390Z,1492153545.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:45.406Z,1492153545.406 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T07:05:45.407Z,1492153545.407 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:05:45.407Z,1492153545.407 [BPC1](ERROR): Data Fault
2017-04-14T07:05:45.421Z,1492153545.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:45.470Z,1492153545.470 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:05:45.799Z,1492153545.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:45.821Z,1492153545.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:46.175Z,1492153546.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:46.208Z,1492153546.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:46.581Z,1492153546.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:46.630Z,1492153546.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:46.697Z,1492153546.697 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:05:46.697Z,1492153546.697 [BPC1] No Fault, FailCount= 1
2017-04-14T07:05:46.983Z,1492153546.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:47.105Z,1492153547.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:47.398Z,1492153547.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:47.419Z,1492153547.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:47.779Z,1492153547.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:47.845Z,1492153547.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:48.194Z,1492153548.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:48.211Z,1492153548.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:48.578Z,1492153548.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:48.612Z,1492153548.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:49.003Z,1492153549.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:49.034Z,1492153549.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:49.399Z,1492153549.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:49.470Z,1492153549.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:49.775Z,1492153549.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:49.799Z,1492153549.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:50.175Z,1492153550.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:50.238Z,1492153550.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:50.589Z,1492153550.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:50.640Z,1492153550.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:51.002Z,1492153551.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:51.042Z,1492153551.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:51.389Z,1492153551.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:51.421Z,1492153551.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:51.773Z,1492153551.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:51.808Z,1492153551.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:52.176Z,1492153552.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:52.196Z,1492153552.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:52.596Z,1492153552.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:52.650Z,1492153552.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:53.085Z,1492153553.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:53.167Z,1492153553.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:53.406Z,1492153553.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:53.469Z,1492153553.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:53.782Z,1492153553.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:53.850Z,1492153553.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:54.177Z,1492153554.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:54.206Z,1492153554.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:54.576Z,1492153554.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:54.605Z,1492153554.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:55.013Z,1492153555.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:55.086Z,1492153555.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:55.430Z,1492153555.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:55.470Z,1492153555.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:55.778Z,1492153555.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:55.794Z,1492153555.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:56.185Z,1492153556.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:56.200Z,1492153556.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:56.626Z,1492153556.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:56.681Z,1492153556.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:56.989Z,1492153556.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:57.035Z,1492153557.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:57.411Z,1492153557.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:57.478Z,1492153557.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:57.819Z,1492153557.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:57.839Z,1492153557.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:58.201Z,1492153558.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:58.245Z,1492153558.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:58.591Z,1492153558.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:58.614Z,1492153558.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:58.977Z,1492153558.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:59.006Z,1492153559.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:59.381Z,1492153559.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:59.421Z,1492153559.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:05:59.784Z,1492153559.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:05:59.871Z,1492153559.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:00.178Z,1492153560.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:00.202Z,1492153560.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:00.582Z,1492153560.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:00.630Z,1492153560.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:00.977Z,1492153560.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:01.021Z,1492153561.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:01.392Z,1492153561.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:01.446Z,1492153561.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:01.789Z,1492153561.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:01.837Z,1492153561.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:02.182Z,1492153562.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:02.197Z,1492153562.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:02.622Z,1492153562.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:02.653Z,1492153562.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:03.019Z,1492153563.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:03.052Z,1492153563.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:03.384Z,1492153563.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:03.424Z,1492153563.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:03.784Z,1492153563.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:03.827Z,1492153563.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:04.181Z,1492153564.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:04.196Z,1492153564.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:04.596Z,1492153564.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:04.612Z,1492153564.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:04.988Z,1492153564.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:05.012Z,1492153565.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:05.393Z,1492153565.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:05.408Z,1492153565.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:05.787Z,1492153565.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:05.803Z,1492153565.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:06.198Z,1492153566.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:06.215Z,1492153566.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:06.576Z,1492153566.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:06.607Z,1492153566.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:07.014Z,1492153567.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:07.055Z,1492153567.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:07.398Z,1492153567.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:07.438Z,1492153567.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:07.805Z,1492153567.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:07.861Z,1492153567.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:08.186Z,1492153568.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:08.206Z,1492153568.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:08.620Z,1492153568.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:08.672Z,1492153568.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:08.979Z,1492153568.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:09.035Z,1492153569.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:09.438Z,1492153569.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:09.510Z,1492153569.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:09.789Z,1492153569.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:09.850Z,1492153569.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:10.184Z,1492153570.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:10.204Z,1492153570.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:10.635Z,1492153570.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:10.685Z,1492153570.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:10.978Z,1492153570.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:11.007Z,1492153571.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:11.376Z,1492153571.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:11.421Z,1492153571.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:11.819Z,1492153571.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:11.871Z,1492153571.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:12.193Z,1492153572.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:12.209Z,1492153572.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:12.578Z,1492153572.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:12.618Z,1492153572.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:12.978Z,1492153572.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:12.987Z,1492153572.987 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T07:06:12.987Z,1492153572.987 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:06:12.987Z,1492153572.987 [BPC1](ERROR): Data Fault
2017-04-14T07:06:13.026Z,1492153573.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:13.064Z,1492153573.063 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:06:13.397Z,1492153573.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:13.418Z,1492153573.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:13.818Z,1492153573.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:13.833Z,1492153573.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:14.182Z,1492153574.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:14.228Z,1492153574.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:14.301Z,1492153574.301 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:06:14.301Z,1492153574.301 [BPC1] No Fault, FailCount= 1
2017-04-14T07:06:14.584Z,1492153574.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:14.674Z,1492153574.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:14.983Z,1492153574.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:15.034Z,1492153575.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:15.379Z,1492153575.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:15.402Z,1492153575.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:15.784Z,1492153575.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:15.799Z,1492153575.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:16.211Z,1492153576.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:16.248Z,1492153576.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:16.577Z,1492153576.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:16.608Z,1492153576.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:16.973Z,1492153576.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:17.011Z,1492153577.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:17.381Z,1492153577.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:17.408Z,1492153577.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:17.781Z,1492153577.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:17.809Z,1492153577.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:18.176Z,1492153578.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:18.206Z,1492153578.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:18.573Z,1492153578.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:18.613Z,1492153578.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:18.979Z,1492153578.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:19.018Z,1492153579.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:19.381Z,1492153579.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:19.410Z,1492153579.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:19.775Z,1492153579.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:19.821Z,1492153579.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:20.199Z,1492153580.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:20.216Z,1492153580.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:20.589Z,1492153580.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:20.610Z,1492153580.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:21.004Z,1492153581.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:21.069Z,1492153581.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:21.382Z,1492153581.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:21.411Z,1492153581.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:21.781Z,1492153581.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:21.826Z,1492153581.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:22.200Z,1492153582.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:22.218Z,1492153582.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:22.574Z,1492153582.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:22.611Z,1492153582.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:22.979Z,1492153582.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:23.010Z,1492153583.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:23.375Z,1492153583.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:23.415Z,1492153583.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:23.806Z,1492153583.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:23.858Z,1492153583.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:24.181Z,1492153584.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:24.212Z,1492153584.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:24.581Z,1492153584.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:24.618Z,1492153584.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:25.009Z,1492153585.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:25.038Z,1492153585.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:25.419Z,1492153585.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:25.483Z,1492153585.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:25.785Z,1492153585.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:25.802Z,1492153585.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:26.182Z,1492153586.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:26.199Z,1492153586.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:26.591Z,1492153586.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:26.628Z,1492153586.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:27.007Z,1492153587.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:27.067Z,1492153587.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:27.400Z,1492153587.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:27.514Z,1492153587.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:27.781Z,1492153587.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:27.817Z,1492153587.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:28.184Z,1492153588.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:28.258Z,1492153588.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:28.595Z,1492153588.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:28.637Z,1492153588.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:29.007Z,1492153589.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:29.154Z,1492153589.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:34.075Z,1492153594.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:34.130Z,1492153594.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:34.268Z,1492153594.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:34.334Z,1492153594.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:34.643Z,1492153594.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:34.659Z,1492153594.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:35.042Z,1492153595.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:35.058Z,1492153595.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:35.442Z,1492153595.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:35.459Z,1492153595.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:35.829Z,1492153595.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:35.855Z,1492153595.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:36.236Z,1492153596.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:36.252Z,1492153596.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:36.634Z,1492153596.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:36.651Z,1492153596.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:37.048Z,1492153597.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:37.098Z,1492153597.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:37.440Z,1492153597.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:37.489Z,1492153597.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:37.842Z,1492153597.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:37.862Z,1492153597.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:38.239Z,1492153598.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:38.303Z,1492153598.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:38.649Z,1492153598.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:38.742Z,1492153598.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:39.037Z,1492153599.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:39.074Z,1492153599.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:39.444Z,1492153599.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:39.535Z,1492153599.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:39.831Z,1492153599.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:39.872Z,1492153599.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:40.229Z,1492153600.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:40.266Z,1492153600.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:40.659Z,1492153600.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:40.678Z,1492153600.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:41.035Z,1492153601.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:41.067Z,1492153601.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:41.434Z,1492153601.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:41.455Z,1492153601.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:41.836Z,1492153601.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:41.852Z,1492153601.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:42.238Z,1492153602.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:42.254Z,1492153602.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:42.637Z,1492153602.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:42.658Z,1492153602.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:43.049Z,1492153603.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:43.068Z,1492153603.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:43.429Z,1492153603.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:43.456Z,1492153603.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:43.845Z,1492153603.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:43.862Z,1492153603.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:44.229Z,1492153604.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:44.268Z,1492153604.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:44.633Z,1492153604.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:44.660Z,1492153604.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:45.031Z,1492153605.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:45.065Z,1492153605.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:45.429Z,1492153605.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:45.461Z,1492153605.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:45.829Z,1492153605.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:45.893Z,1492153605.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:46.229Z,1492153606.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:46.278Z,1492153606.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:46.629Z,1492153606.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:46.644Z,1492153606.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:47.038Z,1492153607.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:47.137Z,1492153607.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:47.441Z,1492153607.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:47.457Z,1492153607.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:47.836Z,1492153607.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:47.885Z,1492153607.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:48.236Z,1492153608.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:48.290Z,1492153608.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:48.638Z,1492153608.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:48.654Z,1492153608.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:49.036Z,1492153609.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:49.052Z,1492153609.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:49.437Z,1492153609.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:49.453Z,1492153609.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:49.837Z,1492153609.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:49.853Z,1492153609.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:50.229Z,1492153610.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:50.266Z,1492153610.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:50.633Z,1492153610.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:50.660Z,1492153610.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:51.049Z,1492153611.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:51.066Z,1492153611.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:51.429Z,1492153611.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:51.462Z,1492153611.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:51.833Z,1492153611.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:51.860Z,1492153611.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:52.229Z,1492153612.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:52.270Z,1492153612.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:52.633Z,1492153612.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:52.666Z,1492153612.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:53.033Z,1492153613.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:53.066Z,1492153613.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:53.429Z,1492153613.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:53.466Z,1492153613.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:53.829Z,1492153613.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:53.864Z,1492153613.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:54.235Z,1492153614.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:54.264Z,1492153614.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:54.633Z,1492153614.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:54.650Z,1492153614.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:55.037Z,1492153615.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:55.052Z,1492153615.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:55.442Z,1492153615.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:55.462Z,1492153615.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:55.841Z,1492153615.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:55.857Z,1492153615.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:56.245Z,1492153616.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:56.260Z,1492153616.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:56.632Z,1492153616.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:56.664Z,1492153616.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:57.029Z,1492153617.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:57.056Z,1492153617.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:57.429Z,1492153617.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:57.462Z,1492153617.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:57.833Z,1492153617.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:57.860Z,1492153617.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:58.229Z,1492153618.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:58.266Z,1492153618.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:58.631Z,1492153618.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:58.670Z,1492153618.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:59.039Z,1492153619.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:59.090Z,1492153619.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:59.434Z,1492153619.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:59.451Z,1492153619.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:06:59.837Z,1492153619.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:06:59.904Z,1492153619.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:00.230Z,1492153620.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:00.314Z,1492153620.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:00.650Z,1492153620.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:00.666Z,1492153620.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:01.067Z,1492153621.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:01.185Z,1492153621.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:01.442Z,1492153621.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:01.458Z,1492153621.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:01.841Z,1492153621.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:01.944Z,1492153621.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:02.241Z,1492153622.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:02.313Z,1492153622.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:02.637Z,1492153622.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:02.662Z,1492153622.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:03.037Z,1492153623.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:03.058Z,1492153623.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:03.442Z,1492153623.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:03.459Z,1492153623.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:03.836Z,1492153623.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:03.858Z,1492153623.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:04.238Z,1492153624.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:04.265Z,1492153624.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:04.639Z,1492153624.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:04.654Z,1492153624.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:05.033Z,1492153625.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:05.075Z,1492153625.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:05.429Z,1492153625.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:05.462Z,1492153625.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:05.834Z,1492153625.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:05.869Z,1492153625.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:06.226Z,1492153626.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:06.243Z,1492153626.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:06.629Z,1492153626.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:06.647Z,1492153626.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:07.036Z,1492153627.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:07.082Z,1492153627.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:07.437Z,1492153627.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:07.469Z,1492153627.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:07.833Z,1492153627.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:07.855Z,1492153627.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:08.237Z,1492153628.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:08.252Z,1492153628.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:08.632Z,1492153628.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:08.647Z,1492153628.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:09.038Z,1492153629.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:09.054Z,1492153629.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:09.448Z,1492153629.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:09.463Z,1492153629.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:09.836Z,1492153629.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:09.862Z,1492153629.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:10.236Z,1492153630.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:10.268Z,1492153630.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:10.629Z,1492153630.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:10.662Z,1492153630.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:11.029Z,1492153631.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:11.066Z,1492153631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:11.429Z,1492153631.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:11.461Z,1492153631.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:11.837Z,1492153631.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:11.869Z,1492153631.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:12.234Z,1492153632.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:12.262Z,1492153632.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:12.634Z,1492153632.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:12.650Z,1492153632.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:12.650Z,1492153632.650 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:07:12.650Z,1492153632.650 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:07:12.673Z,1492153632.673 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:12.673Z,1492153632.673 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:07:12.673Z,1492153632.673 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:07:12.711Z,1492153632.711 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:07:12.711Z,1492153632.711 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:07:13.031Z,1492153633.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:13.089Z,1492153633.089 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:07:13.089Z,1492153633.089 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:07:13.090Z,1492153633.090 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:07:13.090Z,1492153633.090 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:07:13.437Z,1492153633.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:13.456Z,1492153633.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:07:13.457Z,1492153633.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:07:13.457Z,1492153633.457 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:07:13.462Z,1492153633.462 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:07:13.463Z,1492153633.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:07:13.463Z,1492153633.463 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:07:13.829Z,1492153633.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:13.862Z,1492153633.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:14.241Z,1492153634.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:14.319Z,1492153634.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:14.626Z,1492153634.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:14.661Z,1492153634.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:15.031Z,1492153635.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:15.047Z,1492153635.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:15.434Z,1492153635.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:15.459Z,1492153635.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:15.834Z,1492153635.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:15.850Z,1492153635.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:16.235Z,1492153636.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:16.255Z,1492153636.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:16.637Z,1492153636.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:16.652Z,1492153636.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:17.037Z,1492153637.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:17.058Z,1492153637.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:17.438Z,1492153637.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:17.446Z,1492153637.446 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:07:17.447Z,1492153637.447 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:07:17.447Z,1492153637.447 [BPC1](ERROR): Communications Fault
2017-04-14T07:07:17.456Z,1492153637.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:17.516Z,1492153637.516 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:07:17.836Z,1492153637.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:17.862Z,1492153637.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:18.233Z,1492153638.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:18.258Z,1492153638.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:18.629Z,1492153638.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:18.666Z,1492153638.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:18.710Z,1492153638.710 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:07:18.710Z,1492153638.710 [BPC1] No Fault, FailCount= 1
2017-04-14T07:07:19.033Z,1492153639.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:19.114Z,1492153639.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:19.433Z,1492153639.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:19.498Z,1492153639.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:19.838Z,1492153639.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:19.854Z,1492153639.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:20.237Z,1492153640.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:20.253Z,1492153640.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:20.635Z,1492153640.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:20.655Z,1492153640.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:21.037Z,1492153641.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:21.058Z,1492153641.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:21.438Z,1492153641.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:21.458Z,1492153641.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:21.836Z,1492153641.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:21.857Z,1492153641.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:22.229Z,1492153642.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:22.256Z,1492153642.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:22.629Z,1492153642.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:22.662Z,1492153642.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:23.029Z,1492153643.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:23.050Z,1492153643.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:23.433Z,1492153643.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:23.476Z,1492153643.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:23.833Z,1492153643.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:23.870Z,1492153643.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:24.229Z,1492153644.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:24.299Z,1492153644.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:24.637Z,1492153644.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:24.653Z,1492153644.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:25.036Z,1492153645.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:25.064Z,1492153645.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:25.441Z,1492153645.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:25.493Z,1492153645.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:25.836Z,1492153645.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:25.856Z,1492153645.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:26.236Z,1492153646.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:26.286Z,1492153646.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:26.636Z,1492153646.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:26.686Z,1492153646.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:27.029Z,1492153647.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:27.062Z,1492153647.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:27.429Z,1492153647.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:27.470Z,1492153647.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:27.833Z,1492153647.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:27.874Z,1492153647.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:28.231Z,1492153648.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:28.263Z,1492153648.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:28.629Z,1492153648.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:28.671Z,1492153648.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:29.037Z,1492153649.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:29.052Z,1492153649.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:32.614Z,1492153652.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:32.638Z,1492153652.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:32.748Z,1492153652.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:32.784Z,1492153652.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:33.099Z,1492153653.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:33.115Z,1492153653.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:33.507Z,1492153653.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:33.523Z,1492153653.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:33.911Z,1492153653.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:33.927Z,1492153653.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:34.315Z,1492153654.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:34.331Z,1492153654.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:34.754Z,1492153654.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:34.769Z,1492153654.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:35.094Z,1492153655.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:35.144Z,1492153655.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:35.507Z,1492153655.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:35.523Z,1492153655.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:35.977Z,1492153655.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:36.024Z,1492153656.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:36.347Z,1492153656.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:36.373Z,1492153656.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:36.755Z,1492153656.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:36.801Z,1492153656.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:37.100Z,1492153657.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:37.142Z,1492153657.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:37.497Z,1492153657.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:37.526Z,1492153657.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:37.912Z,1492153657.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:37.928Z,1492153657.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:38.303Z,1492153658.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:38.321Z,1492153658.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:38.754Z,1492153658.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:38.836Z,1492153658.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:39.103Z,1492153659.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:39.131Z,1492153659.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:39.503Z,1492153659.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:39.519Z,1492153659.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:39.904Z,1492153659.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:39.961Z,1492153659.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:40.307Z,1492153660.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:40.323Z,1492153660.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:40.772Z,1492153660.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:40.836Z,1492153660.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:41.101Z,1492153661.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:41.116Z,1492153661.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:41.499Z,1492153661.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:41.553Z,1492153661.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:41.905Z,1492153661.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:41.920Z,1492153661.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:42.299Z,1492153662.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:42.314Z,1492153662.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:42.751Z,1492153662.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:42.779Z,1492153662.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:43.095Z,1492153663.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:43.110Z,1492153663.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:43.499Z,1492153663.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:43.515Z,1492153663.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:43.911Z,1492153663.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:43.948Z,1492153663.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:44.302Z,1492153664.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:44.317Z,1492153664.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:44.707Z,1492153664.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:44.723Z,1492153664.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:45.095Z,1492153665.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:45.133Z,1492153665.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:45.508Z,1492153665.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:45.523Z,1492153665.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:45.893Z,1492153665.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:45.927Z,1492153665.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:46.296Z,1492153666.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:46.340Z,1492153666.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:46.700Z,1492153666.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:46.715Z,1492153666.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:47.103Z,1492153667.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:47.188Z,1492153667.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:47.513Z,1492153667.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:47.536Z,1492153667.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:47.926Z,1492153667.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:47.976Z,1492153667.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:48.328Z,1492153668.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:48.345Z,1492153668.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:48.705Z,1492153668.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:48.721Z,1492153668.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:49.108Z,1492153669.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:49.202Z,1492153669.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:49.504Z,1492153669.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:49.530Z,1492153669.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:49.918Z,1492153669.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:49.934Z,1492153669.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:50.298Z,1492153670.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:50.326Z,1492153670.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:50.766Z,1492153670.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:50.813Z,1492153670.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:51.109Z,1492153671.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:51.143Z,1492153671.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:51.509Z,1492153671.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:51.541Z,1492153671.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:51.934Z,1492153671.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:51.959Z,1492153671.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:52.301Z,1492153672.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:52.357Z,1492153672.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:52.763Z,1492153672.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:52.827Z,1492153672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:53.114Z,1492153673.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:53.154Z,1492153673.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:53.529Z,1492153673.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:53.553Z,1492153673.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:53.900Z,1492153673.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:53.932Z,1492153673.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:54.292Z,1492153674.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:54.308Z,1492153674.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:54.755Z,1492153674.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:54.810Z,1492153674.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:55.104Z,1492153675.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:55.120Z,1492153675.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:55.505Z,1492153675.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:55.521Z,1492153675.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:55.906Z,1492153675.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:55.921Z,1492153675.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:56.307Z,1492153676.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:56.322Z,1492153676.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:56.771Z,1492153676.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:56.806Z,1492153676.806 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:07:56.806Z,1492153676.806 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:07:56.806Z,1492153676.806 [BPC1](ERROR): Communications Fault
2017-04-14T07:07:56.815Z,1492153676.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:56.835Z,1492153676.835 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:07:57.095Z,1492153677.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:57.138Z,1492153677.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:57.499Z,1492153677.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:57.525Z,1492153677.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:57.899Z,1492153677.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:57.926Z,1492153677.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:57.946Z,1492153677.946 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:07:57.946Z,1492153677.946 [BPC1] No Fault, FailCount= 1
2017-04-14T07:07:58.305Z,1492153678.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:58.389Z,1492153678.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:58.697Z,1492153678.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:58.725Z,1492153678.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:59.110Z,1492153679.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:59.129Z,1492153679.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:59.503Z,1492153679.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:59.519Z,1492153679.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:07:59.903Z,1492153679.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:07:59.918Z,1492153679.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:00.304Z,1492153680.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:00.319Z,1492153680.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:00.695Z,1492153680.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:00.721Z,1492153680.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:01.118Z,1492153681.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:01.212Z,1492153681.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:01.495Z,1492153681.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:01.523Z,1492153681.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:01.901Z,1492153681.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:01.943Z,1492153681.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:02.295Z,1492153682.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:02.310Z,1492153682.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:02.699Z,1492153682.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:02.715Z,1492153682.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:03.136Z,1492153683.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:03.213Z,1492153683.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:03.505Z,1492153683.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:03.546Z,1492153683.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:03.899Z,1492153683.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:03.914Z,1492153683.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:04.306Z,1492153684.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:04.322Z,1492153684.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:04.786Z,1492153684.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:04.846Z,1492153684.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:05.101Z,1492153685.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:05.140Z,1492153685.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:05.505Z,1492153685.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:05.541Z,1492153685.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:05.901Z,1492153685.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:05.916Z,1492153685.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:06.297Z,1492153686.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:06.313Z,1492153686.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:06.758Z,1492153686.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:06.804Z,1492153686.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:07.105Z,1492153687.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:07.158Z,1492153687.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:07.504Z,1492153687.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:07.520Z,1492153687.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:07.924Z,1492153687.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:07.954Z,1492153687.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:08.334Z,1492153688.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:08.382Z,1492153688.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:08.774Z,1492153688.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:08.826Z,1492153688.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:09.098Z,1492153689.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:09.181Z,1492153689.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:09.508Z,1492153689.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:09.534Z,1492153689.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:09.920Z,1492153689.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:09.938Z,1492153689.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:10.316Z,1492153690.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:10.352Z,1492153690.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:10.744Z,1492153690.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:10.793Z,1492153690.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:11.104Z,1492153691.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:11.122Z,1492153691.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:11.508Z,1492153691.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:11.530Z,1492153691.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:11.901Z,1492153691.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:11.930Z,1492153691.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:12.313Z,1492153692.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:12.329Z,1492153692.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:12.707Z,1492153692.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:12.804Z,1492153692.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:13.097Z,1492153693.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:13.123Z,1492153693.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:13.510Z,1492153693.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:13.527Z,1492153693.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:13.901Z,1492153693.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:13.930Z,1492153693.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:14.299Z,1492153694.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:14.330Z,1492153694.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:14.701Z,1492153694.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:14.735Z,1492153694.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:15.175Z,1492153695.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:15.203Z,1492153695.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:15.511Z,1492153695.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:15.557Z,1492153695.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:15.905Z,1492153695.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:15.921Z,1492153695.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:16.294Z,1492153696.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:16.326Z,1492153696.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:16.708Z,1492153696.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:16.744Z,1492153696.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:17.163Z,1492153697.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:17.188Z,1492153697.188 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:08:17.188Z,1492153697.188 [BPC1] Communications Fault, FailCount= 2
2017-04-14T07:08:17.188Z,1492153697.188 [BPC1](ERROR): Communications Fault
2017-04-14T07:08:17.215Z,1492153697.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:17.257Z,1492153697.257 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:08:17.495Z,1492153697.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:17.534Z,1492153697.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:17.917Z,1492153697.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:17.950Z,1492153697.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:18.302Z,1492153698.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:18.339Z,1492153698.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:18.381Z,1492153698.381 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:08:18.381Z,1492153698.381 [BPC1] No Fault, FailCount= 2
2017-04-14T07:08:18.740Z,1492153698.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:18.818Z,1492153698.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:19.095Z,1492153699.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:19.135Z,1492153699.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:19.499Z,1492153699.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:19.531Z,1492153699.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:19.895Z,1492153699.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:19.938Z,1492153699.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:20.299Z,1492153700.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:20.339Z,1492153700.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:20.730Z,1492153700.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:20.763Z,1492153700.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:21.103Z,1492153701.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:21.143Z,1492153701.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:21.543Z,1492153701.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:21.595Z,1492153701.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:21.910Z,1492153701.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:21.939Z,1492153701.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:22.309Z,1492153702.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:22.352Z,1492153702.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:22.721Z,1492153702.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:22.777Z,1492153702.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:23.111Z,1492153703.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:23.150Z,1492153703.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:23.500Z,1492153703.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:23.538Z,1492153703.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:23.902Z,1492153703.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:23.918Z,1492153703.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:24.312Z,1492153704.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:24.330Z,1492153704.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:24.744Z,1492153704.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:24.776Z,1492153704.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:25.141Z,1492153705.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:25.181Z,1492153705.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:25.495Z,1492153705.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:25.542Z,1492153705.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:25.918Z,1492153705.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:25.941Z,1492153705.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:26.325Z,1492153706.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:26.345Z,1492153706.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:26.743Z,1492153706.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:26.826Z,1492153706.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:27.113Z,1492153707.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:27.149Z,1492153707.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:27.508Z,1492153707.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:27.530Z,1492153707.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:27.909Z,1492153707.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:27.934Z,1492153707.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:27.996Z,1492153707.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:28.301Z,1492153708.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:28.327Z,1492153708.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:28.712Z,1492153708.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:28.729Z,1492153708.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:28.792Z,1492153708.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:29.175Z,1492153709.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:29.217Z,1492153709.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:32.516Z,1492153712.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:32.665Z,1492153712.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:32.793Z,1492153712.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:32.813Z,1492153712.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:33.185Z,1492153713.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:33.238Z,1492153713.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:33.584Z,1492153713.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:33.600Z,1492153713.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:33.983Z,1492153713.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:34.041Z,1492153714.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:34.380Z,1492153714.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:34.427Z,1492153714.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:34.778Z,1492153714.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:34.798Z,1492153714.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:35.184Z,1492153715.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:35.200Z,1492153715.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:35.589Z,1492153715.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:35.604Z,1492153715.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:35.972Z,1492153715.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:36.016Z,1492153716.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:36.387Z,1492153716.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:36.404Z,1492153716.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:36.792Z,1492153716.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:36.814Z,1492153716.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:36.821Z,1492153716.821 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:36.821Z,1492153716.821 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:08:36.821Z,1492153716.821 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:08:36.868Z,1492153716.868 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:08:37.166Z,1492153717.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:37.194Z,1492153717.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:37.221Z,1492153717.221 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:08:37.221Z,1492153717.221 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:08:37.569Z,1492153717.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:37.612Z,1492153717.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:37.618Z,1492153717.618 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:08:37.618Z,1492153717.618 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:08:37.619Z,1492153717.619 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:08:37.969Z,1492153717.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:38.015Z,1492153718.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:38.374Z,1492153718.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:38.405Z,1492153718.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:38.778Z,1492153718.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:38.823Z,1492153718.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:39.174Z,1492153719.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:39.190Z,1492153719.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:39.576Z,1492153719.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:39.592Z,1492153719.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:39.979Z,1492153719.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:40.031Z,1492153720.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:40.370Z,1492153720.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:40.405Z,1492153720.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:40.808Z,1492153720.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:40.931Z,1492153720.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:41.217Z,1492153721.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:41.278Z,1492153721.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:41.611Z,1492153721.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:41.672Z,1492153721.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:42.002Z,1492153722.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:42.028Z,1492153722.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:42.392Z,1492153722.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:42.442Z,1492153722.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:42.783Z,1492153722.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:42.843Z,1492153722.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:43.183Z,1492153723.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:43.265Z,1492153723.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:43.592Z,1492153723.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:43.654Z,1492153723.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:43.970Z,1492153723.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:44.006Z,1492153724.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:44.380Z,1492153724.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:44.408Z,1492153724.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:44.794Z,1492153724.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:44.858Z,1492153724.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:45.188Z,1492153725.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:45.254Z,1492153725.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:45.575Z,1492153725.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:45.602Z,1492153725.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:45.985Z,1492153725.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:46.001Z,1492153726.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:46.382Z,1492153726.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:46.437Z,1492153726.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:46.777Z,1492153726.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:46.798Z,1492153726.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:47.185Z,1492153727.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:47.242Z,1492153727.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:47.577Z,1492153727.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:47.630Z,1492153727.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:47.979Z,1492153727.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:48.003Z,1492153728.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:48.388Z,1492153728.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:48.416Z,1492153728.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:48.769Z,1492153728.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:48.822Z,1492153728.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:49.171Z,1492153729.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:49.206Z,1492153729.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:49.581Z,1492153729.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:49.597Z,1492153729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:49.970Z,1492153729.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:50.009Z,1492153730.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:50.369Z,1492153730.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:50.395Z,1492153730.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:50.790Z,1492153730.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:50.805Z,1492153730.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:51.169Z,1492153731.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:51.195Z,1492153731.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:51.581Z,1492153731.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:51.596Z,1492153731.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:51.969Z,1492153731.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:51.993Z,1492153731.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:52.369Z,1492153732.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:52.407Z,1492153732.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:52.769Z,1492153732.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:52.802Z,1492153732.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:53.177Z,1492153733.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:53.208Z,1492153733.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:53.573Z,1492153733.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:53.605Z,1492153733.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:53.977Z,1492153733.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:54.008Z,1492153734.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:54.377Z,1492153734.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:54.408Z,1492153734.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:54.800Z,1492153734.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:54.857Z,1492153734.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:55.206Z,1492153735.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:55.230Z,1492153735.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:55.577Z,1492153735.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:55.612Z,1492153735.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:55.981Z,1492153735.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:56.013Z,1492153736.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:56.381Z,1492153736.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:56.412Z,1492153736.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:56.774Z,1492153736.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:56.790Z,1492153736.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:57.169Z,1492153737.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:57.190Z,1492153737.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:57.574Z,1492153737.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:57.589Z,1492153737.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:57.980Z,1492153737.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:58.023Z,1492153738.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:58.386Z,1492153738.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:58.457Z,1492153738.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:58.763Z,1492153738.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:58.810Z,1492153738.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:59.169Z,1492153739.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:59.206Z,1492153739.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:59.569Z,1492153739.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:08:59.607Z,1492153739.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:08:59.969Z,1492153739.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:00.014Z,1492153740.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:00.369Z,1492153740.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:00.406Z,1492153740.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:00.771Z,1492153740.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:00.815Z,1492153740.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:01.219Z,1492153741.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:01.278Z,1492153741.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:01.579Z,1492153741.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:01.624Z,1492153741.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:02.022Z,1492153742.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:02.068Z,1492153742.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:02.371Z,1492153742.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:02.458Z,1492153742.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:02.771Z,1492153742.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:02.818Z,1492153742.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:03.184Z,1492153743.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:03.261Z,1492153743.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:03.572Z,1492153743.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:03.599Z,1492153743.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:03.971Z,1492153743.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:04.007Z,1492153744.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:04.377Z,1492153744.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:04.399Z,1492153744.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:04.777Z,1492153744.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:04.805Z,1492153744.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:05.200Z,1492153745.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:05.245Z,1492153745.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:05.581Z,1492153745.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:05.596Z,1492153745.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:05.966Z,1492153745.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:05.992Z,1492153745.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:06.385Z,1492153746.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:06.406Z,1492153746.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:06.769Z,1492153746.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:06.796Z,1492153746.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:07.169Z,1492153747.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:07.203Z,1492153747.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:07.581Z,1492153747.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:07.602Z,1492153747.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:07.985Z,1492153747.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:08.006Z,1492153748.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:08.369Z,1492153748.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:08.395Z,1492153748.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:08.787Z,1492153748.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:08.819Z,1492153748.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:09.173Z,1492153749.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:09.206Z,1492153749.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:09.569Z,1492153749.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:09.602Z,1492153749.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:09.986Z,1492153749.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:10.002Z,1492153750.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:10.373Z,1492153750.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:10.400Z,1492153750.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:10.773Z,1492153750.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:10.842Z,1492153750.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:11.170Z,1492153751.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:11.206Z,1492153751.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:11.574Z,1492153751.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:11.602Z,1492153751.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:11.974Z,1492153751.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:12.057Z,1492153752.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:12.375Z,1492153752.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:12.403Z,1492153752.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:12.773Z,1492153752.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:12.842Z,1492153752.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:13.193Z,1492153753.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:13.209Z,1492153753.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:13.569Z,1492153753.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:13.618Z,1492153753.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:13.973Z,1492153753.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:14.027Z,1492153754.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:14.369Z,1492153754.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:14.405Z,1492153754.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:14.770Z,1492153754.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:14.804Z,1492153754.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:15.169Z,1492153755.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:15.194Z,1492153755.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:15.569Z,1492153755.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:15.611Z,1492153755.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:15.974Z,1492153755.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:16.002Z,1492153756.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:16.373Z,1492153756.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:16.412Z,1492153756.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:16.769Z,1492153756.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:16.813Z,1492153756.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:17.163Z,1492153757.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:17.179Z,1492153757.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:17.573Z,1492153757.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:17.612Z,1492153757.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:17.974Z,1492153757.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:17.989Z,1492153757.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:18.382Z,1492153758.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:18.417Z,1492153758.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:18.785Z,1492153758.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:18.817Z,1492153758.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:19.181Z,1492153759.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:19.218Z,1492153759.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:19.577Z,1492153759.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:19.593Z,1492153759.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:19.976Z,1492153759.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:19.992Z,1492153759.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:20.381Z,1492153760.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:20.396Z,1492153760.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:20.781Z,1492153760.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:20.797Z,1492153760.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:21.180Z,1492153761.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:21.196Z,1492153761.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:21.581Z,1492153761.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:21.596Z,1492153761.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:21.969Z,1492153761.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:21.996Z,1492153761.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:22.369Z,1492153762.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:22.402Z,1492153762.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:22.769Z,1492153762.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:22.796Z,1492153762.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:23.188Z,1492153763.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:23.204Z,1492153763.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:23.569Z,1492153763.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:23.595Z,1492153763.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:23.973Z,1492153763.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:24.000Z,1492153764.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:24.369Z,1492153764.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:24.423Z,1492153764.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:24.773Z,1492153764.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:24.799Z,1492153764.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:25.169Z,1492153765.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:25.219Z,1492153765.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:25.569Z,1492153765.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:25.602Z,1492153765.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:26.055Z,1492153766.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:26.100Z,1492153766.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:26.373Z,1492153766.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:26.398Z,1492153766.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:26.769Z,1492153766.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:26.871Z,1492153766.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:27.207Z,1492153767.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:27.223Z,1492153767.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:27.577Z,1492153767.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:27.619Z,1492153767.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:27.974Z,1492153767.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:27.998Z,1492153767.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:28.377Z,1492153768.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:28.412Z,1492153768.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:28.774Z,1492153768.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:28.804Z,1492153768.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:29.177Z,1492153769.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:29.193Z,1492153769.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:29.221Z,1492153769.221 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:09:29.222Z,1492153769.222 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:09:29.222Z,1492153769.222 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:09:29.222Z,1492153769.222 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:09:32.818Z,1492153772.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:32.834Z,1492153772.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:32.842Z,1492153772.842 [Default:CheckIn:D] Stopped
2017-04-14T07:09:32.843Z,1492153772.843 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:09:32.941Z,1492153772.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:32.979Z,1492153772.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:32.989Z,1492153772.989 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 223.458724 min 
2017-04-14T07:09:32.989Z,1492153772.989 [Default:CheckIn:E] Stopped
2017-04-14T07:09:32.989Z,1492153772.990 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn] Stopped
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn](INFO): Running loop #32
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn] Running Loop=32
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:09:32.990Z,1492153772.990 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:09:33.312Z,1492153773.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:33.347Z,1492153773.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:33.689Z,1492153773.690 [NAL9602](INFO): Powering up
2017-04-14T07:09:33.706Z,1492153773.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:33.745Z,1492153773.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:34.121Z,1492153774.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:34.137Z,1492153774.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:34.548Z,1492153774.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:34.613Z,1492153774.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:34.917Z,1492153774.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:34.950Z,1492153774.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:35.309Z,1492153775.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:35.325Z,1492153775.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:35.721Z,1492153775.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:35.751Z,1492153775.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:36.121Z,1492153776.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:36.152Z,1492153776.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:36.517Z,1492153776.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:36.542Z,1492153776.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:36.917Z,1492153776.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:36.933Z,1492153776.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:37.316Z,1492153777.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:37.334Z,1492153777.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:37.717Z,1492153777.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:37.733Z,1492153777.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:38.111Z,1492153778.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:38.135Z,1492153778.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:38.521Z,1492153778.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:38.612Z,1492153778.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:38.917Z,1492153778.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:38.933Z,1492153778.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:39.321Z,1492153779.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:39.389Z,1492153779.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:39.711Z,1492153779.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:39.748Z,1492153779.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:40.112Z,1492153780.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:40.158Z,1492153780.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:40.517Z,1492153780.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:40.574Z,1492153780.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:40.909Z,1492153780.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:41.013Z,1492153781.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:41.313Z,1492153781.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:41.349Z,1492153781.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:41.717Z,1492153781.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:41.750Z,1492153781.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:42.109Z,1492153782.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:42.146Z,1492153782.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:42.584Z,1492153782.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:42.636Z,1492153782.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:42.913Z,1492153782.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:42.934Z,1492153782.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:43.314Z,1492153783.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:43.330Z,1492153783.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:43.717Z,1492153783.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:43.733Z,1492153783.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:44.124Z,1492153784.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:44.140Z,1492153784.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:44.564Z,1492153784.564 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:09:44.584Z,1492153784.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:44.640Z,1492153784.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:44.917Z,1492153784.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:44.946Z,1492153784.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:45.329Z,1492153785.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:45.345Z,1492153785.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:45.732Z,1492153785.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:45.766Z,1492153785.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:46.128Z,1492153786.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:46.150Z,1492153786.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:46.568Z,1492153786.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:46.612Z,1492153786.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:46.916Z,1492153786.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:46.936Z,1492153786.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:47.321Z,1492153787.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:47.338Z,1492153787.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:47.732Z,1492153787.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:47.748Z,1492153787.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:48.121Z,1492153788.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:48.136Z,1492153788.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:48.567Z,1492153788.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:48.637Z,1492153788.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:48.919Z,1492153788.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:48.935Z,1492153788.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:49.307Z,1492153789.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:49.322Z,1492153789.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:49.718Z,1492153789.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:49.742Z,1492153789.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:50.118Z,1492153790.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:50.162Z,1492153790.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:50.517Z,1492153790.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:50.532Z,1492153790.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:50.909Z,1492153790.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:50.950Z,1492153790.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:51.313Z,1492153791.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:51.374Z,1492153791.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:51.717Z,1492153791.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:51.754Z,1492153791.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:51.848Z,1492153791.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:52.140Z,1492153792.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:52.156Z,1492153792.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:52.521Z,1492153792.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:52.552Z,1492153792.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:52.644Z,1492153792.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:52.914Z,1492153792.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:53.043Z,1492153793.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:53.318Z,1492153793.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:53.334Z,1492153793.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:53.723Z,1492153793.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:53.778Z,1492153793.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:54.117Z,1492153794.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:54.171Z,1492153794.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:54.521Z,1492153794.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:54.537Z,1492153794.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:54.941Z,1492153794.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:55.022Z,1492153795.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:55.317Z,1492153795.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:55.333Z,1492153795.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:55.726Z,1492153795.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:55.743Z,1492153795.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:56.125Z,1492153796.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:56.146Z,1492153796.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:56.551Z,1492153796.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:56.622Z,1492153796.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:56.914Z,1492153796.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:56.930Z,1492153796.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:57.318Z,1492153797.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:57.334Z,1492153797.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:57.717Z,1492153797.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:57.732Z,1492153797.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:58.094Z,1492153798.094 [NAL9602](INFO): SBD MO Status=2, MOMSN=2125, MT Status=2, MTMSN=0
2017-04-14T07:09:58.094Z,1492153798.094 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T07:09:58.130Z,1492153798.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:58.146Z,1492153798.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:58.575Z,1492153798.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:58.626Z,1492153798.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:58.920Z,1492153798.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:58.954Z,1492153798.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:59.313Z,1492153799.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:59.341Z,1492153799.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:09:59.709Z,1492153799.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:09:59.736Z,1492153799.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:00.109Z,1492153800.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:00.147Z,1492153800.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:00.565Z,1492153800.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:00.616Z,1492153800.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:00.928Z,1492153800.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:00.967Z,1492153800.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:01.323Z,1492153801.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:01.340Z,1492153801.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:01.721Z,1492153801.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:01.742Z,1492153801.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:02.123Z,1492153802.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:02.139Z,1492153802.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:02.564Z,1492153802.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:02.618Z,1492153802.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:02.932Z,1492153802.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:02.948Z,1492153802.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:03.311Z,1492153803.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:03.339Z,1492153803.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:03.728Z,1492153803.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:03.744Z,1492153803.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:04.115Z,1492153804.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:04.154Z,1492153804.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:04.510Z,1492153804.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:04.627Z,1492153804.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:04.923Z,1492153804.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:04.940Z,1492153804.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:05.320Z,1492153805.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:05.338Z,1492153805.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:05.718Z,1492153805.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:05.735Z,1492153805.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:05.836Z,1492153805.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:06.117Z,1492153806.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:06.146Z,1492153806.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:06.533Z,1492153806.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:06.597Z,1492153806.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:06.632Z,1492153806.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:06.960Z,1492153806.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:07.023Z,1492153807.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:07.311Z,1492153807.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:07.347Z,1492153807.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:07.709Z,1492153807.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:07.765Z,1492153807.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:08.151Z,1492153808.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:08.211Z,1492153808.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:08.574Z,1492153808.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:08.671Z,1492153808.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:09.042Z,1492153809.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:09.175Z,1492153809.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:09.349Z,1492153809.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:09.407Z,1492153809.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:09.764Z,1492153809.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:09.817Z,1492153809.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:10.172Z,1492153810.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:10.238Z,1492153810.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:10.614Z,1492153810.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:10.640Z,1492153810.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:10.922Z,1492153810.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:10.954Z,1492153810.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:11.334Z,1492153811.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:11.351Z,1492153811.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:11.729Z,1492153811.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:11.745Z,1492153811.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:12.113Z,1492153812.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:12.206Z,1492153812.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:12.557Z,1492153812.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:12.613Z,1492153812.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:12.912Z,1492153812.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:12.979Z,1492153812.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:13.327Z,1492153813.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:13.398Z,1492153813.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:13.711Z,1492153813.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:13.789Z,1492153813.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:13.789Z,1492153813.789 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T07:10:13.789Z,1492153813.789 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:10:13.809Z,1492153813.809 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:13.809Z,1492153813.809 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T07:10:13.809Z,1492153813.809 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:10:13.872Z,1492153813.872 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:10:13.872Z,1492153813.872 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:10:14.107Z,1492153814.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:14.165Z,1492153814.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:10:14.165Z,1492153814.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T07:10:14.166Z,1492153814.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:10:14.166Z,1492153814.166 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T07:10:14.551Z,1492153814.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:14.604Z,1492153814.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:10:14.605Z,1492153814.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:10:14.605Z,1492153814.605 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:10:14.611Z,1492153814.611 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:10:14.612Z,1492153814.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:10:14.612Z,1492153814.612 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:10:14.917Z,1492153814.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:14.967Z,1492153814.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:15.312Z,1492153815.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:15.340Z,1492153815.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:15.720Z,1492153815.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:15.742Z,1492153815.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:16.114Z,1492153816.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:16.146Z,1492153816.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:16.538Z,1492153816.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:16.592Z,1492153816.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:16.919Z,1492153816.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:16.965Z,1492153816.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:17.318Z,1492153817.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:17.334Z,1492153817.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:17.720Z,1492153817.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:17.740Z,1492153817.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:18.123Z,1492153818.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:18.138Z,1492153818.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:18.494Z,1492153818.494 [NAL9602](INFO): SBD MO Status=0, MOMSN=2125, MT Status=0, MTMSN=0
2017-04-14T07:10:18.495Z,1492153818.494 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:10:18.528Z,1492153818.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:18.643Z,1492153818.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:18.917Z,1492153818.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:18.954Z,1492153818.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:19.339Z,1492153819.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:19.361Z,1492153819.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:19.728Z,1492153819.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:19.811Z,1492153819.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:20.124Z,1492153820.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:20.190Z,1492153820.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:20.551Z,1492153820.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:20.600Z,1492153820.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:21.039Z,1492153821.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:21.191Z,1492153821.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:21.346Z,1492153821.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:21.462Z,1492153821.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:21.726Z,1492153821.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:21.782Z,1492153821.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:22.135Z,1492153822.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:22.162Z,1492153822.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:22.528Z,1492153822.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:22.595Z,1492153822.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:22.976Z,1492153822.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:23.055Z,1492153823.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:23.320Z,1492153823.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:23.379Z,1492153823.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:23.730Z,1492153823.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:23.791Z,1492153823.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:24.134Z,1492153824.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:24.184Z,1492153824.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:24.548Z,1492153824.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:24.638Z,1492153824.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:24.919Z,1492153824.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:24.954Z,1492153824.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:25.312Z,1492153825.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:25.342Z,1492153825.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:25.714Z,1492153825.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:25.753Z,1492153825.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:26.120Z,1492153826.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:26.154Z,1492153826.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:26.547Z,1492153826.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:26.596Z,1492153826.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:26.943Z,1492153826.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:26.977Z,1492153826.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:27.316Z,1492153827.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:27.369Z,1492153827.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:27.720Z,1492153827.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:27.758Z,1492153827.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:28.124Z,1492153828.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:28.140Z,1492153828.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:28.567Z,1492153828.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:28.644Z,1492153828.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:28.965Z,1492153828.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:29.006Z,1492153829.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:29.364Z,1492153829.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:29.418Z,1492153829.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:36.616Z,1492153836.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:36.686Z,1492153836.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:36.780Z,1492153836.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:36.822Z,1492153836.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:37.180Z,1492153837.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:37.230Z,1492153837.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:37.586Z,1492153837.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:37.602Z,1492153837.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:37.984Z,1492153837.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:38.034Z,1492153838.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:38.368Z,1492153838.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:38.480Z,1492153838.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:38.772Z,1492153838.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:38.808Z,1492153838.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:39.194Z,1492153839.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:39.210Z,1492153839.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:39.572Z,1492153839.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:39.619Z,1492153839.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:39.964Z,1492153839.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:40.002Z,1492153840.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:40.363Z,1492153840.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:40.379Z,1492153840.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:40.777Z,1492153840.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:40.792Z,1492153840.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:41.166Z,1492153841.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:41.195Z,1492153841.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:41.563Z,1492153841.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:41.595Z,1492153841.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:41.971Z,1492153841.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:42.002Z,1492153842.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:42.389Z,1492153842.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:42.484Z,1492153842.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:42.808Z,1492153842.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:42.826Z,1492153842.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:43.168Z,1492153843.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:43.206Z,1492153843.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:43.571Z,1492153843.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:43.603Z,1492153843.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:43.964Z,1492153843.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:44.002Z,1492153844.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:44.369Z,1492153844.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:44.384Z,1492153844.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:44.793Z,1492153844.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:44.814Z,1492153844.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:45.176Z,1492153845.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:45.198Z,1492153845.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:45.580Z,1492153845.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:45.596Z,1492153845.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:45.976Z,1492153845.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:45.998Z,1492153845.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:46.376Z,1492153846.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:46.392Z,1492153846.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:46.763Z,1492153846.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:46.790Z,1492153846.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:47.181Z,1492153847.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:47.209Z,1492153847.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:47.563Z,1492153847.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:47.595Z,1492153847.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:47.972Z,1492153847.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:48.002Z,1492153848.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:48.376Z,1492153848.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:48.404Z,1492153848.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:48.792Z,1492153848.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:48.808Z,1492153848.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:49.176Z,1492153849.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:49.236Z,1492153849.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:49.563Z,1492153849.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:49.619Z,1492153849.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:49.975Z,1492153849.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:50.015Z,1492153850.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:50.370Z,1492153850.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:50.440Z,1492153850.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:50.780Z,1492153850.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:50.905Z,1492153850.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:51.184Z,1492153851.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:51.201Z,1492153851.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:51.572Z,1492153851.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:51.636Z,1492153851.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:51.961Z,1492153851.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:52.004Z,1492153852.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:52.361Z,1492153852.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:52.459Z,1492153852.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:52.770Z,1492153852.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:52.823Z,1492153852.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:53.174Z,1492153853.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:53.210Z,1492153853.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:53.570Z,1492153853.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:53.586Z,1492153853.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:53.971Z,1492153853.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:53.987Z,1492153853.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:54.391Z,1492153854.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:54.476Z,1492153854.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:54.779Z,1492153854.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:54.795Z,1492153854.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:55.176Z,1492153855.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:55.191Z,1492153855.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:55.577Z,1492153855.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:55.594Z,1492153855.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:55.972Z,1492153855.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:55.988Z,1492153855.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:56.403Z,1492153856.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:56.474Z,1492153856.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:56.795Z,1492153856.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:56.810Z,1492153856.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:57.195Z,1492153857.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:57.210Z,1492153857.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:57.584Z,1492153857.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:57.614Z,1492153857.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:57.968Z,1492153857.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:57.984Z,1492153857.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:58.387Z,1492153858.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:58.457Z,1492153858.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:58.774Z,1492153858.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:58.789Z,1492153858.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:59.179Z,1492153859.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:59.195Z,1492153859.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:59.574Z,1492153859.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:59.590Z,1492153859.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:10:59.983Z,1492153859.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:10:59.999Z,1492153859.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:00.385Z,1492153860.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:00.401Z,1492153860.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:00.775Z,1492153860.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:00.817Z,1492153860.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:01.173Z,1492153861.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:01.206Z,1492153861.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:01.608Z,1492153861.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:02.011Z,1492153862.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:02.398Z,1492153862.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:02.784Z,1492153862.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:02.899Z,1492153862.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:03.152Z,1492153863.152 [NAL9602](INFO): GPS fix at 20170414T071123: (36.802257, -121.787116)
2017-04-14T07:11:03.169Z,1492153863.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:03.219Z,1492153863.219 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:11:03.219Z,1492153863.219 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:11:03.580Z,1492153863.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:03.679Z,1492153863.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:03.679Z,1492153863.679 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:11:03.679Z,1492153863.679 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:11:03.703Z,1492153863.703 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:03.703Z,1492153863.703 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:11:03.703Z,1492153863.703 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:11:03.722Z,1492153863.722 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:11:03.722Z,1492153863.722 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:11:04.168Z,1492153864.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:04.274Z,1492153864.274 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:11:04.275Z,1492153864.274 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:11:04.283Z,1492153864.283 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:11:04.284Z,1492153864.284 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:11:04.586Z,1492153864.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:04.652Z,1492153864.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:11:04.653Z,1492153864.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:11:04.653Z,1492153864.653 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:11:04.663Z,1492153864.662 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:11:04.667Z,1492153864.667 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:11:04.668Z,1492153864.668 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:11:07.985Z,1492153867.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:08.043Z,1492153868.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:08.105Z,1492153868.105 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0132.lzma
2017-04-14T07:11:08.164Z,1492153868.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:08.188Z,1492153868.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:08.529Z,1492153868.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:08.580Z,1492153868.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:08.890Z,1492153868.890 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0132.lzma.bak
2017-04-14T07:11:08.890Z,1492153868.890 [DataOverHttps](INFO): SBD MOMSN=4885405
2017-04-14T07:11:08.970Z,1492153868.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:09.375Z,1492153869.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:09.809Z,1492153869.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:13.242Z,1492153873.242 [NAL9602](INFO): Powering down
2017-04-14T07:11:13.307Z,1492153873.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:13.439Z,1492153873.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:13.856Z,1492153873.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:14.216Z,1492153874.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:14.626Z,1492153874.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:15.022Z,1492153875.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:18.409Z,1492153878.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:18.511Z,1492153878.511 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0133.lzma
2017-04-14T07:11:18.575Z,1492153878.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:18.971Z,1492153878.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:19.242Z,1492153879.242 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0133.lzma.bak
2017-04-14T07:11:19.242Z,1492153879.242 [DataOverHttps](INFO): SBD MOMSN=4885408
2017-04-14T07:11:19.320Z,1492153879.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:19.722Z,1492153879.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:19.731Z,1492153879.731 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:11:19.732Z,1492153879.731 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:11:19.732Z,1492153879.731 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:11:20.060Z,1492153880.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:20.105Z,1492153880.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:20.784Z,1492153880.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:21.580Z,1492153881.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:22.378Z,1492153882.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:22.801Z,1492153882.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:23.596Z,1492153883.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:23.906Z,1492153883.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:24.035Z,1492153884.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:24.392Z,1492153884.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:24.506Z,1492153884.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:24.812Z,1492153884.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:24.813Z,1492153884.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:25.252Z,1492153885.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:25.608Z,1492153885.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:25.643Z,1492153885.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:26.010Z,1492153886.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:26.404Z,1492153886.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:26.470Z,1492153886.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:26.808Z,1492153886.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:26.834Z,1492153886.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:27.208Z,1492153887.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:27.604Z,1492153887.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:27.629Z,1492153887.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:28.016Z,1492153888.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:28.400Z,1492153888.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:28.493Z,1492153888.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:28.800Z,1492153888.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:28.912Z,1492153888.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:29.208Z,1492153889.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:29.624Z,1492153889.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:29.712Z,1492153889.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:30.007Z,1492153890.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:30.443Z,1492153890.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:30.508Z,1492153890.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:30.893Z,1492153890.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:31.221Z,1492153891.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:31.236Z,1492153891.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:31.602Z,1492153891.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:32.006Z,1492153892.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:32.032Z,1492153892.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:32.419Z,1492153892.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:32.828Z,1492153892.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:32.921Z,1492153892.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:33.248Z,1492153893.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:33.276Z,1492153893.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:33.610Z,1492153893.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:34.009Z,1492153894.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:34.072Z,1492153894.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:34.457Z,1492153894.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:34.792Z,1492153894.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:34.820Z,1492153894.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:35.227Z,1492153895.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:35.617Z,1492153895.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:36.029Z,1492153896.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:36.456Z,1492153896.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:36.812Z,1492153896.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:37.244Z,1492153897.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:37.618Z,1492153897.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:37.626Z,1492153897.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:37.626Z,1492153897.626 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:11:37.626Z,1492153897.626 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:11:37.666Z,1492153897.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:11:38.054Z,1492153898.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:38.093Z,1492153898.093 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:11:38.093Z,1492153898.093 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:11:38.465Z,1492153898.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:38.479Z,1492153898.479 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:11:38.480Z,1492153898.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:11:38.480Z,1492153898.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:11:38.804Z,1492153898.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:39.257Z,1492153899.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:39.606Z,1492153899.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:40.038Z,1492153900.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:40.463Z,1492153900.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:40.810Z,1492153900.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:41.243Z,1492153901.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:41.580Z,1492153901.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:41.609Z,1492153901.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:42.007Z,1492153902.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:42.387Z,1492153902.387 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:42.528Z,1492153902.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:42.800Z,1492153902.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:42.830Z,1492153902.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:42.896Z,1492153902.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:43.181Z,1492153903.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:43.205Z,1492153903.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:43.581Z,1492153903.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:43.621Z,1492153903.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:43.692Z,1492153903.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:43.983Z,1492153903.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:44.041Z,1492153904.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:44.382Z,1492153904.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:44.422Z,1492153904.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:44.488Z,1492153904.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:44.893Z,1492153904.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:44.959Z,1492153904.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:45.179Z,1492153905.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:45.236Z,1492153905.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:45.244Z,1492153905.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:45.583Z,1492153905.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:45.630Z,1492153905.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:45.983Z,1492153905.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:46.035Z,1492153906.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:46.389Z,1492153906.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:46.405Z,1492153906.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:46.847Z,1492153906.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:46.892Z,1492153906.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:47.189Z,1492153907.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:47.231Z,1492153907.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:47.592Z,1492153907.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:47.616Z,1492153907.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:47.996Z,1492153907.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:48.012Z,1492153908.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:48.393Z,1492153908.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:48.452Z,1492153908.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:48.781Z,1492153908.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:48.822Z,1492153908.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:49.186Z,1492153909.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:49.224Z,1492153909.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:49.587Z,1492153909.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:49.603Z,1492153909.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:49.990Z,1492153909.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:50.006Z,1492153910.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:50.387Z,1492153910.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:11:50.425Z,1492153910.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:50.812Z,1492153910.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:51.210Z,1492153911.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:51.616Z,1492153911.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:52.026Z,1492153912.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:52.556Z,1492153912.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:52.837Z,1492153912.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:53.238Z,1492153913.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:53.601Z,1492153913.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:54.106Z,1492153914.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:54.505Z,1492153914.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:54.830Z,1492153914.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:55.229Z,1492153915.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:55.625Z,1492153915.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:56.010Z,1492153916.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:56.510Z,1492153916.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:56.821Z,1492153916.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:57.231Z,1492153917.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:57.650Z,1492153917.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:58.016Z,1492153918.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:58.410Z,1492153918.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:58.881Z,1492153918.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:59.239Z,1492153919.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:11:59.622Z,1492153919.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:00.017Z,1492153920.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:00.418Z,1492153920.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:00.869Z,1492153920.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:01.234Z,1492153921.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:01.611Z,1492153921.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x40423 got:0x32768
2017-04-14T07:12:01.656Z,1492153921.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:02.014Z,1492153922.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:02.420Z,1492153922.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:02.817Z,1492153922.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:03.223Z,1492153923.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:03.613Z,1492153923.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:04.022Z,1492153924.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:04.442Z,1492153924.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:04.822Z,1492153924.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:05.222Z,1492153925.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:05.627Z,1492153925.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:06.022Z,1492153926.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:06.422Z,1492153926.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:06.849Z,1492153926.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:07.230Z,1492153927.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:07.627Z,1492153927.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:08.004Z,1492153928.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:08.428Z,1492153928.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:08.826Z,1492153928.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:09.225Z,1492153929.225 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T07:12:09.250Z,1492153929.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:09.610Z,1492153929.610 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:12:09.610Z,1492153929.610 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:12:09.610Z,1492153929.610 [BPC1](ERROR): Communications Fault
2017-04-14T07:12:09.639Z,1492153929.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:09.697Z,1492153929.697 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:12:10.033Z,1492153930.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:10.502Z,1492153930.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:10.821Z,1492153930.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:10.842Z,1492153930.842 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:12:10.842Z,1492153930.842 [BPC1] No Fault, FailCount= 1
2017-04-14T07:12:11.191Z,1492153931.191 [PNI_TCM](ERROR): CRC does not match. Expected:0x57342 got:0x49444
2017-04-14T07:12:11.262Z,1492153931.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:11.631Z,1492153931.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:12.022Z,1492153932.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:12.426Z,1492153932.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:12.846Z,1492153932.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:13.218Z,1492153933.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:13.612Z,1492153933.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:14.014Z,1492153934.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:14.426Z,1492153934.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:14.890Z,1492153934.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:15.260Z,1492153935.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:15.677Z,1492153935.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:16.006Z,1492153936.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:16.436Z,1492153936.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:16.815Z,1492153936.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:17.218Z,1492153937.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:17.613Z,1492153937.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:18.011Z,1492153938.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:18.427Z,1492153938.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:18.822Z,1492153938.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:19.216Z,1492153939.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:19.616Z,1492153939.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:20.020Z,1492153940.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:20.412Z,1492153940.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:23.952Z,1492153943.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:24.088Z,1492153944.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:24.524Z,1492153944.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:24.544Z,1492153944.544 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:12:24.844Z,1492153944.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:25.285Z,1492153945.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:25.683Z,1492153945.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:26.050Z,1492153946.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:26.453Z,1492153946.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:26.853Z,1492153946.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:27.253Z,1492153947.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:27.626Z,1492153947.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:28.058Z,1492153948.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:28.428Z,1492153948.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:28.831Z,1492153948.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:29.235Z,1492153949.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:29.636Z,1492153949.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:30.034Z,1492153950.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:30.442Z,1492153950.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:30.837Z,1492153950.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:31.240Z,1492153951.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:31.642Z,1492153951.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:32.044Z,1492153952.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:32.446Z,1492153952.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:32.844Z,1492153952.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:33.245Z,1492153953.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:33.641Z,1492153953.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:34.038Z,1492153954.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:34.438Z,1492153954.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:34.838Z,1492153954.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:35.244Z,1492153955.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:35.642Z,1492153955.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:36.050Z,1492153956.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:36.444Z,1492153956.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:36.882Z,1492153956.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:37.288Z,1492153957.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:37.744Z,1492153957.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:38.051Z,1492153958.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:38.468Z,1492153958.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:38.867Z,1492153958.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:39.263Z,1492153959.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:39.658Z,1492153959.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:40.070Z,1492153960.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:40.454Z,1492153960.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:40.829Z,1492153960.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:41.252Z,1492153961.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:41.634Z,1492153961.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:42.076Z,1492153962.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:42.446Z,1492153962.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:42.845Z,1492153962.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:43.242Z,1492153963.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:43.637Z,1492153963.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:44.042Z,1492153964.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:44.438Z,1492153964.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:44.848Z,1492153964.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:45.241Z,1492153965.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:45.638Z,1492153965.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:46.042Z,1492153966.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:46.438Z,1492153966.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:46.845Z,1492153966.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:47.250Z,1492153967.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:47.645Z,1492153967.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:48.049Z,1492153968.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:48.442Z,1492153968.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:48.846Z,1492153968.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:49.242Z,1492153969.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:49.652Z,1492153969.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:50.048Z,1492153970.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:50.448Z,1492153970.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:50.851Z,1492153970.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:51.248Z,1492153971.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:51.648Z,1492153971.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:52.086Z,1492153972.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:52.452Z,1492153972.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:52.870Z,1492153972.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:53.252Z,1492153973.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:53.672Z,1492153973.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:54.052Z,1492153974.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:54.466Z,1492153974.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:54.844Z,1492153974.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:55.242Z,1492153975.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:55.643Z,1492153975.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:56.038Z,1492153976.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:56.440Z,1492153976.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:56.840Z,1492153976.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:57.244Z,1492153977.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:57.644Z,1492153977.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:58.041Z,1492153978.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:58.451Z,1492153978.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:58.841Z,1492153978.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:59.250Z,1492153979.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:12:59.643Z,1492153979.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:00.040Z,1492153980.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:00.452Z,1492153980.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:00.851Z,1492153980.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:01.249Z,1492153981.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:01.628Z,1492153981.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:02.034Z,1492153982.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:02.449Z,1492153982.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:02.840Z,1492153982.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:03.238Z,1492153983.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:03.642Z,1492153983.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:04.038Z,1492153984.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:04.443Z,1492153984.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:04.841Z,1492153984.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:05.242Z,1492153985.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:05.642Z,1492153985.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:06.101Z,1492153986.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:06.498Z,1492153986.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:06.841Z,1492153986.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:07.285Z,1492153987.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:07.649Z,1492153987.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:08.070Z,1492153988.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:08.487Z,1492153988.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:08.846Z,1492153988.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:09.246Z,1492153989.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:09.645Z,1492153989.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:10.044Z,1492153990.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:10.437Z,1492153990.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:10.842Z,1492153990.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:11.238Z,1492153991.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:11.641Z,1492153991.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:12.044Z,1492153992.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:12.442Z,1492153992.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:12.846Z,1492153992.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:13.244Z,1492153993.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:13.649Z,1492153993.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:14.049Z,1492153994.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:14.449Z,1492153994.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:14.854Z,1492153994.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:15.236Z,1492153995.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:15.639Z,1492153995.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:16.039Z,1492153996.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:16.437Z,1492153996.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:16.837Z,1492153996.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:17.244Z,1492153997.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:17.650Z,1492153997.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:18.040Z,1492153998.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:18.437Z,1492153998.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:18.838Z,1492153998.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:19.245Z,1492153999.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:19.646Z,1492153999.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:20.049Z,1492154000.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:20.513Z,1492154000.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:24.960Z,1492154004.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:25.078Z,1492154005.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:25.465Z,1492154005.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:25.860Z,1492154005.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:26.337Z,1492154006.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:26.690Z,1492154006.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:27.092Z,1492154007.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:27.457Z,1492154007.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:27.942Z,1492154007.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:28.321Z,1492154008.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:28.761Z,1492154008.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:29.094Z,1492154009.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:29.479Z,1492154009.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:29.858Z,1492154009.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:30.287Z,1492154010.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:30.649Z,1492154010.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:31.117Z,1492154011.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:31.481Z,1492154011.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:31.893Z,1492154011.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:32.318Z,1492154012.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:32.730Z,1492154012.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:33.059Z,1492154013.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:33.479Z,1492154013.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:33.888Z,1492154013.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:34.349Z,1492154014.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:34.677Z,1492154014.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:35.097Z,1492154015.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:35.512Z,1492154015.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:35.842Z,1492154015.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:36.257Z,1492154016.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:36.709Z,1492154016.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:37.114Z,1492154017.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:37.479Z,1492154017.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:37.854Z,1492154017.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:38.279Z,1492154018.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:38.730Z,1492154018.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:39.085Z,1492154019.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:39.456Z,1492154019.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:39.854Z,1492154019.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:40.300Z,1492154020.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:40.682Z,1492154020.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:41.070Z,1492154021.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:41.515Z,1492154021.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:41.873Z,1492154021.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:42.350Z,1492154022.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:42.675Z,1492154022.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:43.070Z,1492154023.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:43.470Z,1492154023.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:43.872Z,1492154023.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:44.273Z,1492154024.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:44.678Z,1492154024.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:45.069Z,1492154025.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:45.475Z,1492154025.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:45.853Z,1492154025.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:46.277Z,1492154026.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:46.663Z,1492154026.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:47.058Z,1492154027.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:47.451Z,1492154027.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:47.861Z,1492154027.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:48.332Z,1492154028.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:48.652Z,1492154028.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:49.057Z,1492154029.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:49.460Z,1492154029.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:49.857Z,1492154029.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:50.262Z,1492154030.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:50.723Z,1492154030.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:51.070Z,1492154031.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:51.482Z,1492154031.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:51.874Z,1492154031.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:52.251Z,1492154032.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:52.727Z,1492154032.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:53.065Z,1492154033.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:53.460Z,1492154033.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:53.867Z,1492154033.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:54.297Z,1492154034.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:54.753Z,1492154034.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:55.062Z,1492154035.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:55.490Z,1492154035.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:55.927Z,1492154035.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:56.310Z,1492154036.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:56.690Z,1492154036.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:57.049Z,1492154037.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:57.475Z,1492154037.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:57.877Z,1492154037.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:58.273Z,1492154038.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:58.651Z,1492154038.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:59.059Z,1492154039.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:59.454Z,1492154039.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:13:59.850Z,1492154039.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:00.267Z,1492154040.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:00.657Z,1492154040.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:01.055Z,1492154041.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:01.457Z,1492154041.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:01.871Z,1492154041.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:02.328Z,1492154042.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:02.674Z,1492154042.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:03.071Z,1492154043.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:03.445Z,1492154043.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:03.878Z,1492154043.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:04.253Z,1492154044.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:04.668Z,1492154044.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:04.668Z,1492154044.668 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:14:04.668Z,1492154044.668 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:14:04.692Z,1492154044.692 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:04.692Z,1492154044.692 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:14:04.692Z,1492154044.692 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:14:04.735Z,1492154044.736 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:14:04.736Z,1492154044.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:14:05.077Z,1492154045.077 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:14:05.077Z,1492154045.077 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:14:05.078Z,1492154045.078 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:14:05.078Z,1492154045.078 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:14:05.470Z,1492154045.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:14:05.471Z,1492154045.471 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:14:05.473Z,1492154045.473 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:14:05.478Z,1492154045.478 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:14:05.479Z,1492154045.478 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:14:05.479Z,1492154045.479 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:14:05.854Z,1492154045.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:06.249Z,1492154046.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:06.686Z,1492154046.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:07.063Z,1492154047.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:07.462Z,1492154047.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:07.866Z,1492154047.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:08.261Z,1492154048.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:08.734Z,1492154048.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:09.064Z,1492154049.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:09.461Z,1492154049.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:09.877Z,1492154049.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:10.278Z,1492154050.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:10.682Z,1492154050.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:11.078Z,1492154051.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:11.477Z,1492154051.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:11.854Z,1492154051.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:12.282Z,1492154052.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:12.651Z,1492154052.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:13.053Z,1492154053.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:13.462Z,1492154053.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:13.862Z,1492154053.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:14.264Z,1492154054.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:14.656Z,1492154054.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:15.054Z,1492154055.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:15.461Z,1492154055.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:15.862Z,1492154055.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:16.286Z,1492154056.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:16.648Z,1492154056.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:17.054Z,1492154057.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:17.440Z,1492154057.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:17.848Z,1492154057.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:18.254Z,1492154058.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:18.656Z,1492154058.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:19.054Z,1492154059.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:19.460Z,1492154059.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:19.862Z,1492154059.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:20.274Z,1492154060.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:20.714Z,1492154060.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:26.490Z,1492154066.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:26.640Z,1492154066.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:26.985Z,1492154066.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:27.415Z,1492154067.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:27.797Z,1492154067.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:28.222Z,1492154068.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:28.615Z,1492154068.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:28.978Z,1492154068.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:29.390Z,1492154069.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:29.769Z,1492154069.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:30.241Z,1492154070.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:30.572Z,1492154070.572 [PNI_TCM](ERROR): CRC does not match. Expected:0x4106 got:0x31084
2017-04-14T07:14:30.598Z,1492154070.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:30.976Z,1492154070.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:31.356Z,1492154071.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:31.777Z,1492154071.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:32.173Z,1492154072.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:32.627Z,1492154072.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:32.989Z,1492154072.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:33.384Z,1492154073.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:33.777Z,1492154073.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:34.169Z,1492154074.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:34.626Z,1492154074.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:34.983Z,1492154074.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:35.380Z,1492154075.380 [PNI_TCM](ERROR): CRC does not match. Expected:0x41592 got:0x51992
2017-04-14T07:14:35.408Z,1492154075.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:35.785Z,1492154075.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:36.261Z,1492154076.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:36.593Z,1492154076.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:37.022Z,1492154077.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:37.412Z,1492154077.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:37.783Z,1492154077.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:38.183Z,1492154078.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:38.575Z,1492154078.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:38.581Z,1492154078.582 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:38.582Z,1492154078.582 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:14:38.582Z,1492154078.582 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:14:38.608Z,1492154078.608 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:14:38.986Z,1492154078.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:39.024Z,1492154079.024 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:14:39.024Z,1492154079.024 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:14:39.377Z,1492154079.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:39.382Z,1492154079.382 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:14:39.383Z,1492154079.383 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:14:39.384Z,1492154079.384 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:14:39.785Z,1492154079.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:40.199Z,1492154080.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:40.742Z,1492154080.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:40.998Z,1492154080.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:41.388Z,1492154081.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:41.810Z,1492154081.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:42.240Z,1492154082.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:42.637Z,1492154082.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:43.027Z,1492154083.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:43.394Z,1492154083.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:43.828Z,1492154083.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:44.274Z,1492154084.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:44.612Z,1492154084.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:44.982Z,1492154084.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:45.377Z,1492154085.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:45.777Z,1492154085.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:46.237Z,1492154086.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:46.620Z,1492154086.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:46.985Z,1492154086.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:47.381Z,1492154087.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:47.782Z,1492154087.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:48.181Z,1492154088.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:48.619Z,1492154088.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:48.970Z,1492154088.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:49.371Z,1492154089.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:49.776Z,1492154089.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:50.173Z,1492154090.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:50.580Z,1492154090.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:51.031Z,1492154091.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:51.376Z,1492154091.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:51.789Z,1492154091.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:52.232Z,1492154092.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:52.605Z,1492154092.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:52.985Z,1492154092.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:53.407Z,1492154093.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:53.792Z,1492154093.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:54.185Z,1492154094.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:54.590Z,1492154094.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:55.059Z,1492154095.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:55.284Z,1492154095.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:55.426Z,1492154095.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:55.780Z,1492154095.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:56.080Z,1492154096.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:56.227Z,1492154096.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:56.484Z,1492154096.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:56.599Z,1492154096.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:57.014Z,1492154097.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:57.280Z,1492154097.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:57.439Z,1492154097.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:57.769Z,1492154097.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:58.079Z,1492154098.079 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:58.262Z,1492154098.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:58.578Z,1492154098.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:58.596Z,1492154098.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:59.026Z,1492154099.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:59.379Z,1492154099.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:14:59.392Z,1492154099.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:14:59.777Z,1492154099.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:00.181Z,1492154100.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:00.188Z,1492154100.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:00.635Z,1492154100.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:00.968Z,1492154100.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:00.996Z,1492154100.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:01.390Z,1492154101.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:01.764Z,1492154101.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:01.780Z,1492154101.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:02.179Z,1492154102.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:02.560Z,1492154102.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:02.614Z,1492154102.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:02.964Z,1492154102.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:02.978Z,1492154102.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:03.378Z,1492154103.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:03.789Z,1492154103.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:04.178Z,1492154104.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:04.589Z,1492154104.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:04.978Z,1492154104.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:05.369Z,1492154105.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:05.787Z,1492154105.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:06.191Z,1492154106.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:06.592Z,1492154106.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:07.014Z,1492154107.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:07.366Z,1492154107.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:07.774Z,1492154107.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:08.170Z,1492154108.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:08.567Z,1492154108.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:08.970Z,1492154108.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:09.252Z,1492154109.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:09.374Z,1492154109.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:09.826Z,1492154109.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:10.048Z,1492154110.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:10.304Z,1492154110.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:10.476Z,1492154110.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:10.623Z,1492154110.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:10.974Z,1492154110.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:11.272Z,1492154111.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:11.430Z,1492154111.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:11.794Z,1492154111.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:12.068Z,1492154112.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:12.221Z,1492154112.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:12.564Z,1492154112.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:12.580Z,1492154112.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:12.976Z,1492154112.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:13.360Z,1492154113.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:13.379Z,1492154113.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:13.788Z,1492154113.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:14.156Z,1492154114.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:14.196Z,1492154114.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:14.564Z,1492154114.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:14.868Z,1492154114.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:14.960Z,1492154114.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:15.434Z,1492154115.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:15.664Z,1492154115.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:15.813Z,1492154115.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:16.166Z,1492154116.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:16.466Z,1492154116.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:16.669Z,1492154116.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:16.966Z,1492154116.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:16.968Z,1492154116.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:17.374Z,1492154117.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:17.764Z,1492154117.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:17.807Z,1492154117.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:18.183Z,1492154118.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:18.436Z,1492154118.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:18.572Z,1492154118.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:18.973Z,1492154118.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:19.232Z,1492154119.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:19.400Z,1492154119.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:19.798Z,1492154119.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:20.031Z,1492154120.030 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:20.178Z,1492154120.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:20.436Z,1492154120.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:20.572Z,1492154120.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:20.972Z,1492154120.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:21.232Z,1492154121.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:22.029Z,1492154122.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:22.436Z,1492154122.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:23.232Z,1492154123.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:24.029Z,1492154124.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:24.440Z,1492154124.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:24.734Z,1492154124.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:24.878Z,1492154124.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:25.236Z,1492154125.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:25.240Z,1492154125.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:25.689Z,1492154125.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:26.032Z,1492154126.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:26.042Z,1492154126.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:26.472Z,1492154126.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:26.828Z,1492154126.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:26.885Z,1492154126.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:27.276Z,1492154127.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:27.472Z,1492154127.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:27.692Z,1492154127.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:28.084Z,1492154128.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:28.268Z,1492154128.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:28.522Z,1492154128.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:28.850Z,1492154128.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:28.940Z,1492154128.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:29.266Z,1492154129.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:29.635Z,1492154129.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:29.740Z,1492154129.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:30.072Z,1492154130.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:30.512Z,1492154130.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:30.536Z,1492154130.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:30.836Z,1492154130.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:30.940Z,1492154130.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:31.313Z,1492154131.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:31.645Z,1492154131.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:31.736Z,1492154131.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:32.107Z,1492154132.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:32.436Z,1492154132.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:32.443Z,1492154132.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:32.842Z,1492154132.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:33.232Z,1492154133.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:33.271Z,1492154133.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:33.643Z,1492154133.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:34.028Z,1492154134.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:34.105Z,1492154134.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:34.436Z,1492154134.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:34.449Z,1492154134.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:34.864Z,1492154134.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:35.240Z,1492154135.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:35.254Z,1492154135.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:35.651Z,1492154135.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:36.037Z,1492154136.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:36.098Z,1492154136.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:36.450Z,1492154136.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:36.464Z,1492154136.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:36.852Z,1492154136.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:37.261Z,1492154137.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:37.270Z,1492154137.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:37.653Z,1492154137.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:38.056Z,1492154138.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:38.074Z,1492154138.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:38.458Z,1492154138.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:38.460Z,1492154138.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:38.897Z,1492154138.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:39.256Z,1492154139.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:39.278Z,1492154139.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:39.638Z,1492154139.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:40.054Z,1492154140.054 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:40.125Z,1492154140.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:40.489Z,1492154140.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:40.516Z,1492154140.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:40.859Z,1492154140.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:41.282Z,1492154141.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:41.312Z,1492154141.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:41.636Z,1492154141.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:42.076Z,1492154142.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:42.108Z,1492154142.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:42.541Z,1492154142.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:42.854Z,1492154142.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:42.864Z,1492154142.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:43.266Z,1492154143.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:43.660Z,1492154143.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:43.667Z,1492154143.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:44.060Z,1492154144.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:44.456Z,1492154144.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:44.557Z,1492154144.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:44.847Z,1492154144.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:44.876Z,1492154144.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:45.238Z,1492154145.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:45.653Z,1492154145.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:45.676Z,1492154145.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:46.086Z,1492154146.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:46.396Z,1492154146.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:46.432Z,1492154146.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:46.856Z,1492154146.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:47.192Z,1492154147.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:47.260Z,1492154147.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:47.652Z,1492154147.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:47.988Z,1492154147.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:48.105Z,1492154148.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:48.416Z,1492154148.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:48.489Z,1492154148.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:48.863Z,1492154148.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:49.212Z,1492154149.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:49.271Z,1492154149.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:49.638Z,1492154149.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:50.008Z,1492154150.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:50.137Z,1492154150.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:50.414Z,1492154150.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:50.451Z,1492154150.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:50.866Z,1492154150.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:51.212Z,1492154151.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:51.253Z,1492154151.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:51.660Z,1492154151.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:52.009Z,1492154152.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:52.076Z,1492154152.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:52.417Z,1492154152.417 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:52.449Z,1492154152.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:52.858Z,1492154152.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:53.212Z,1492154153.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:53.263Z,1492154153.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:53.714Z,1492154153.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:54.010Z,1492154154.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:54.111Z,1492154154.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:54.500Z,1492154154.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:54.502Z,1492154154.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:54.841Z,1492154154.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:55.289Z,1492154155.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:55.304Z,1492154155.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:55.687Z,1492154155.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:56.086Z,1492154156.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:56.124Z,1492154156.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:56.510Z,1492154156.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:56.880Z,1492154156.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:56.888Z,1492154156.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:57.264Z,1492154157.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:57.657Z,1492154157.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:57.676Z,1492154157.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:15:58.054Z,1492154158.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:58.506Z,1492154158.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:58.862Z,1492154158.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:59.271Z,1492154159.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:15:59.652Z,1492154159.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:00.031Z,1492154160.031 [PNI_TCM](ERROR): CRC does not match. Expected:0x52152 got:0x49449
2017-04-14T07:16:00.066Z,1492154160.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:00.466Z,1492154160.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:00.849Z,1492154160.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:01.284Z,1492154161.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:01.620Z,1492154161.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:01.663Z,1492154161.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:02.016Z,1492154162.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:02.075Z,1492154162.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:02.417Z,1492154162.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:02.486Z,1492154162.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:02.813Z,1492154162.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:02.859Z,1492154162.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:03.226Z,1492154163.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:03.264Z,1492154163.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:03.630Z,1492154163.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:03.682Z,1492154163.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:04.034Z,1492154164.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:04.041Z,1492154164.041 [PNI_TCM](ERROR): CRC does not match. Expected:0x7813 got:0x7489
2017-04-14T07:16:04.067Z,1492154164.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:04.414Z,1492154164.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:04.482Z,1492154164.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:04.862Z,1492154164.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:04.899Z,1492154164.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:05.216Z,1492154165.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:05.282Z,1492154165.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:05.624Z,1492154165.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:05.660Z,1492154165.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:06.054Z,1492154166.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:06.071Z,1492154166.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:06.424Z,1492154166.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:06.440Z,1492154166.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:06.869Z,1492154166.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:06.932Z,1492154166.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:07.227Z,1492154167.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:07.250Z,1492154167.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:07.625Z,1492154167.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:07.691Z,1492154167.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:08.104Z,1492154168.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:08.246Z,1492154168.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:08.445Z,1492154168.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:08.481Z,1492154168.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:08.815Z,1492154168.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:08.905Z,1492154168.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:09.250Z,1492154169.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:09.266Z,1492154169.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:09.628Z,1492154169.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:09.683Z,1492154169.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:10.053Z,1492154170.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:10.109Z,1492154170.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:10.432Z,1492154170.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:10.460Z,1492154170.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:10.832Z,1492154170.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:10.848Z,1492154170.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:11.230Z,1492154171.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:11.278Z,1492154171.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:11.633Z,1492154171.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:11.657Z,1492154171.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:12.035Z,1492154172.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:12.085Z,1492154172.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:12.442Z,1492154172.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:12.459Z,1492154172.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:12.818Z,1492154172.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:12.850Z,1492154172.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:13.214Z,1492154173.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:13.247Z,1492154173.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:13.620Z,1492154173.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:13.626Z,1492154173.626 [PNI_TCM](ERROR): CRC does not match. Expected:0x56795 got:0x58392
2017-04-14T07:16:13.656Z,1492154173.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:14.018Z,1492154174.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:14.046Z,1492154174.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:14.425Z,1492154174.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:14.454Z,1492154174.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:14.821Z,1492154174.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:14.848Z,1492154174.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:15.219Z,1492154175.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:15.248Z,1492154175.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:15.624Z,1492154175.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:15.665Z,1492154175.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:16.029Z,1492154176.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:16.061Z,1492154176.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:16.427Z,1492154176.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:16.456Z,1492154176.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:16.821Z,1492154176.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:16.836Z,1492154176.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:17.226Z,1492154177.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:17.242Z,1492154177.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:17.623Z,1492154177.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:17.638Z,1492154177.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:18.053Z,1492154178.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:18.082Z,1492154178.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:18.449Z,1492154178.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:18.474Z,1492154178.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:18.820Z,1492154178.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:18.846Z,1492154178.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:19.229Z,1492154179.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:19.245Z,1492154179.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:19.636Z,1492154179.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:19.652Z,1492154179.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:20.039Z,1492154180.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:20.055Z,1492154180.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:20.415Z,1492154180.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:20.442Z,1492154180.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:20.451Z,1492154180.451 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:16:20.451Z,1492154180.451 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:16:20.451Z,1492154180.451 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:16:20.451Z,1492154180.451 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:16:20.821Z,1492154180.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:20.854Z,1492154180.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:20.863Z,1492154180.863 [Default:CheckIn:D] Stopped
2017-04-14T07:16:20.863Z,1492154180.863 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:16:21.228Z,1492154181.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:21.250Z,1492154181.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:21.259Z,1492154181.259 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 230.259066 min 
2017-04-14T07:16:21.259Z,1492154181.259 [Default:CheckIn:E] Stopped
2017-04-14T07:16:21.259Z,1492154181.259 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:16:21.259Z,1492154181.260 [Default:CheckIn] Stopped
2017-04-14T07:16:21.260Z,1492154181.260 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:16:21.260Z,1492154181.260 [Default:CheckIn](INFO): Running loop #33
2017-04-14T07:16:21.260Z,1492154181.260 [Default:CheckIn] Running Loop=33
2017-04-14T07:16:21.260Z,1492154181.260 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:16:21.260Z,1492154181.260 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:16:22.448Z,1492154182.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:23.244Z,1492154183.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:25.754Z,1492154185.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:25.875Z,1492154185.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:25.978Z,1492154185.978 [NAL9602](INFO): Powering up
2017-04-14T07:16:26.022Z,1492154186.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:26.070Z,1492154186.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:26.421Z,1492154186.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:26.474Z,1492154186.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:26.793Z,1492154186.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:26.818Z,1492154186.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:27.165Z,1492154187.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:27.246Z,1492154187.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:27.566Z,1492154187.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:27.627Z,1492154187.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:28.004Z,1492154188.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:28.020Z,1492154188.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:28.375Z,1492154188.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:28.412Z,1492154188.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:28.765Z,1492154188.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:28.806Z,1492154188.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:29.168Z,1492154189.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:29.212Z,1492154189.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:29.573Z,1492154189.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:29.614Z,1492154189.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:29.997Z,1492154189.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:30.013Z,1492154190.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:30.370Z,1492154190.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:30.406Z,1492154190.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:30.773Z,1492154190.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:30.821Z,1492154190.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:31.172Z,1492154191.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:31.214Z,1492154191.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:31.582Z,1492154191.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:31.609Z,1492154191.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:31.984Z,1492154191.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:32.012Z,1492154192.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:32.373Z,1492154192.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:32.420Z,1492154192.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:32.769Z,1492154192.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:32.809Z,1492154192.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:33.182Z,1492154193.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:33.214Z,1492154193.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:33.586Z,1492154193.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:33.601Z,1492154193.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:33.981Z,1492154193.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:34.020Z,1492154194.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:34.374Z,1492154194.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:34.395Z,1492154194.395 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T07:16:34.435Z,1492154194.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:34.800Z,1492154194.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:34.836Z,1492154194.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:35.187Z,1492154195.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:35.222Z,1492154195.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:35.573Z,1492154195.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:35.610Z,1492154195.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:36.030Z,1492154196.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:36.075Z,1492154196.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:36.388Z,1492154196.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:36.414Z,1492154196.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:36.749Z,1492154196.749 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:16:36.770Z,1492154196.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:36.812Z,1492154196.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:37.173Z,1492154197.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:37.210Z,1492154197.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:37.583Z,1492154197.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:37.621Z,1492154197.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:38.004Z,1492154198.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:38.020Z,1492154198.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:38.417Z,1492154198.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:38.458Z,1492154198.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:38.774Z,1492154198.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:38.838Z,1492154198.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:39.172Z,1492154199.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:39.203Z,1492154199.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:39.592Z,1492154199.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:39.687Z,1492154199.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:39.994Z,1492154199.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:40.025Z,1492154200.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:40.428Z,1492154200.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:40.473Z,1492154200.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:40.770Z,1492154200.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:40.842Z,1492154200.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:41.183Z,1492154201.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:41.199Z,1492154201.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:41.586Z,1492154201.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:41.641Z,1492154201.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:41.974Z,1492154201.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:42.002Z,1492154202.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:42.386Z,1492154202.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:42.442Z,1492154202.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:42.778Z,1492154202.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:42.800Z,1492154202.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:43.168Z,1492154203.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:43.206Z,1492154203.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:43.569Z,1492154203.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:43.605Z,1492154203.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:43.998Z,1492154203.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:44.014Z,1492154204.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:44.377Z,1492154204.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:44.410Z,1492154204.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:44.774Z,1492154204.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:44.801Z,1492154204.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:45.181Z,1492154205.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:45.206Z,1492154205.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:45.578Z,1492154205.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:45.610Z,1492154205.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:46.011Z,1492154206.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:46.027Z,1492154206.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:46.379Z,1492154206.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:46.410Z,1492154206.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:46.774Z,1492154206.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:46.806Z,1492154206.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:47.178Z,1492154207.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:47.207Z,1492154207.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:47.580Z,1492154207.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:47.612Z,1492154207.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:47.988Z,1492154207.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:48.033Z,1492154208.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:48.384Z,1492154208.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:48.400Z,1492154208.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:48.752Z,1492154208.752 [NAL9602](INFO): SBD MO Status=0, MOMSN=2126, MT Status=0, MTMSN=0
2017-04-14T07:16:48.752Z,1492154208.752 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:16:48.774Z,1492154208.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:48.792Z,1492154208.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:49.178Z,1492154209.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:49.194Z,1492154209.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:49.594Z,1492154209.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:49.627Z,1492154209.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:50.037Z,1492154210.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:50.069Z,1492154210.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:50.389Z,1492154210.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:50.434Z,1492154210.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:50.770Z,1492154210.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:50.803Z,1492154210.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:51.192Z,1492154211.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:51.219Z,1492154211.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:51.601Z,1492154211.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:51.630Z,1492154211.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:51.991Z,1492154211.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:52.036Z,1492154212.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:52.398Z,1492154212.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:52.437Z,1492154212.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:52.796Z,1492154212.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:52.818Z,1492154212.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:53.195Z,1492154213.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:53.213Z,1492154213.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:53.571Z,1492154213.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:53.598Z,1492154213.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:53.982Z,1492154213.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:53.998Z,1492154213.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:54.437Z,1492154214.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:54.518Z,1492154214.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:54.790Z,1492154214.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:54.822Z,1492154214.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:55.206Z,1492154215.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:55.226Z,1492154215.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:55.630Z,1492154215.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:55.668Z,1492154215.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:56.014Z,1492154216.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:56.073Z,1492154216.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:56.376Z,1492154216.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:56.406Z,1492154216.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:56.785Z,1492154216.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:56.834Z,1492154216.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:57.211Z,1492154217.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:57.256Z,1492154217.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:57.595Z,1492154217.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:57.609Z,1492154217.609 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:16:57.609Z,1492154217.609 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:16:57.609Z,1492154217.609 [BPC1](ERROR): Communications Fault
2017-04-14T07:16:57.644Z,1492154217.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:57.689Z,1492154217.689 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:16:58.012Z,1492154218.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:58.063Z,1492154218.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:58.391Z,1492154218.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:58.406Z,1492154218.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:58.785Z,1492154218.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:58.805Z,1492154218.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:58.825Z,1492154218.825 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:16:58.825Z,1492154218.825 [BPC1] No Fault, FailCount= 1
2017-04-14T07:16:59.165Z,1492154219.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:59.243Z,1492154219.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:59.607Z,1492154219.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:16:59.638Z,1492154219.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:16:59.976Z,1492154219.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:00.014Z,1492154220.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:00.387Z,1492154220.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:00.445Z,1492154220.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:00.823Z,1492154220.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:00.884Z,1492154220.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:01.253Z,1492154221.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:01.328Z,1492154221.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:01.666Z,1492154221.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:01.726Z,1492154221.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:02.203Z,1492154222.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:02.292Z,1492154222.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:02.627Z,1492154222.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:02.697Z,1492154222.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:02.938Z,1492154222.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:03.065Z,1492154223.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:03.375Z,1492154223.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:03.403Z,1492154223.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:03.744Z,1492154223.744 [NAL9602](INFO): GPS fix at 20170414T071724: (36.802304, -121.787128)
2017-04-14T07:17:03.843Z,1492154223.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:04.165Z,1492154224.165 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:17:04.166Z,1492154224.165 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:17:04.440Z,1492154224.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:04.457Z,1492154224.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:04.457Z,1492154224.457 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:17:04.457Z,1492154224.457 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:17:04.508Z,1492154224.509 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:04.509Z,1492154224.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:17:04.509Z,1492154224.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:17:04.550Z,1492154224.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:17:04.550Z,1492154224.550 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:17:05.684Z,1492154225.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:05.788Z,1492154225.788 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:17:05.788Z,1492154225.788 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:17:05.789Z,1492154225.789 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:17:05.789Z,1492154225.789 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:17:06.018Z,1492154226.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:06.049Z,1492154226.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:17:06.049Z,1492154226.049 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:17:06.050Z,1492154226.050 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:17:06.055Z,1492154226.055 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:17:06.056Z,1492154226.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:17:06.056Z,1492154226.056 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:17:09.747Z,1492154229.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:09.763Z,1492154229.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:09.898Z,1492154229.898 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0136.lzma
2017-04-14T07:17:09.954Z,1492154229.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:09.978Z,1492154229.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:10.325Z,1492154230.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:10.356Z,1492154230.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:10.678Z,1492154230.678 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0136.lzma.bak
2017-04-14T07:17:10.678Z,1492154230.678 [DataOverHttps](INFO): SBD MOMSN=4885412
2017-04-14T07:17:10.767Z,1492154230.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:10.817Z,1492154230.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:11.111Z,1492154231.111 [NAL9602](INFO): Powering down
2017-04-14T07:17:11.158Z,1492154231.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:11.189Z,1492154231.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:11.507Z,1492154231.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:11.541Z,1492154231.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:15.316Z,1492154235.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:15.410Z,1492154235.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:15.516Z,1492154235.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:15.554Z,1492154235.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:15.898Z,1492154235.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:15.943Z,1492154235.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:16.294Z,1492154236.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:16.351Z,1492154236.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:16.681Z,1492154236.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:16.770Z,1492154236.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:17.111Z,1492154237.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:17.174Z,1492154237.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:18.360Z,1492154238.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:19.156Z,1492154239.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:19.952Z,1492154239.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:20.714Z,1492154240.714 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:21.233Z,1492154241.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:21.275Z,1492154241.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:21.356Z,1492154241.356 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0137.lzma
2017-04-14T07:17:21.386Z,1492154241.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:21.422Z,1492154241.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:21.508Z,1492154241.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:21.759Z,1492154241.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:21.782Z,1492154241.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:22.142Z,1492154242.142 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0137.lzma.bak
2017-04-14T07:17:22.142Z,1492154242.142 [DataOverHttps](INFO): SBD MOMSN=4885414
2017-04-14T07:17:22.195Z,1492154242.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:22.210Z,1492154242.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:22.332Z,1492154242.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:22.576Z,1492154242.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:22.604Z,1492154242.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:22.622Z,1492154242.622 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:17:22.622Z,1492154242.622 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:17:22.622Z,1492154242.622 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:17:22.736Z,1492154242.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:22.954Z,1492154242.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:22.995Z,1492154242.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:27.279Z,1492154247.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:27.338Z,1492154247.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:27.416Z,1492154247.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:27.474Z,1492154247.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:27.918Z,1492154247.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:27.945Z,1492154247.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:28.201Z,1492154248.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:28.250Z,1492154248.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:28.589Z,1492154248.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:28.617Z,1492154248.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:29.003Z,1492154249.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:29.033Z,1492154249.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:29.404Z,1492154249.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:29.452Z,1492154249.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:29.878Z,1492154249.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:29.951Z,1492154249.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:30.217Z,1492154250.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:30.261Z,1492154250.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:30.606Z,1492154250.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:30.622Z,1492154250.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:31.019Z,1492154251.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:31.039Z,1492154251.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:31.428Z,1492154251.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:31.450Z,1492154251.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:31.797Z,1492154251.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:31.909Z,1492154251.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:32.206Z,1492154252.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:32.222Z,1492154252.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:32.598Z,1492154252.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:32.630Z,1492154252.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:32.989Z,1492154252.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:33.021Z,1492154253.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:33.397Z,1492154253.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:33.472Z,1492154253.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:33.797Z,1492154253.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:33.839Z,1492154253.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:34.197Z,1492154254.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:34.306Z,1492154254.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:34.595Z,1492154254.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:34.650Z,1492154254.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:34.997Z,1492154254.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:35.017Z,1492154255.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:35.399Z,1492154255.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:35.457Z,1492154255.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:35.807Z,1492154255.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:35.855Z,1492154255.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:36.234Z,1492154256.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:36.325Z,1492154256.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:36.590Z,1492154256.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:36.617Z,1492154256.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:36.989Z,1492154256.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:37.022Z,1492154257.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:37.391Z,1492154257.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:37.426Z,1492154257.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:37.869Z,1492154257.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:37.914Z,1492154257.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:38.193Z,1492154258.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:38.228Z,1492154258.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:38.597Z,1492154258.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:38.618Z,1492154258.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:38.997Z,1492154258.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:39.023Z,1492154259.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:39.405Z,1492154259.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:39.421Z,1492154259.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:39.427Z,1492154259.427 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:39.428Z,1492154259.428 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:17:39.428Z,1492154259.428 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:17:39.461Z,1492154259.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:17:39.833Z,1492154259.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:39.873Z,1492154259.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:39.931Z,1492154259.931 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:17:39.932Z,1492154259.931 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:17:40.189Z,1492154260.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:40.222Z,1492154260.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:40.228Z,1492154260.228 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:17:40.229Z,1492154260.229 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:17:40.229Z,1492154260.229 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:17:40.589Z,1492154260.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:40.625Z,1492154260.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:40.993Z,1492154260.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:41.038Z,1492154261.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:41.390Z,1492154261.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:41.406Z,1492154261.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:41.831Z,1492154261.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:41.891Z,1492154261.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:42.204Z,1492154262.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:42.226Z,1492154262.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:42.589Z,1492154262.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:42.616Z,1492154262.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:42.989Z,1492154262.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:43.025Z,1492154263.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:43.389Z,1492154263.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:43.425Z,1492154263.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:43.825Z,1492154263.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:43.878Z,1492154263.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:44.197Z,1492154264.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:44.237Z,1492154264.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:44.597Z,1492154264.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:44.612Z,1492154264.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:44.990Z,1492154264.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:45.006Z,1492154265.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:45.394Z,1492154265.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:45.419Z,1492154265.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:45.799Z,1492154265.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:45.910Z,1492154265.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:46.206Z,1492154266.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:46.222Z,1492154266.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:46.596Z,1492154266.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:46.630Z,1492154266.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:47.007Z,1492154267.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:47.076Z,1492154267.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:47.140Z,1492154267.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:47.387Z,1492154267.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:47.413Z,1492154267.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:47.823Z,1492154267.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:47.926Z,1492154267.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:47.936Z,1492154267.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:48.231Z,1492154268.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:48.328Z,1492154268.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:48.614Z,1492154268.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:48.697Z,1492154268.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:49.005Z,1492154269.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:49.050Z,1492154269.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:49.400Z,1492154269.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:49.453Z,1492154269.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:49.800Z,1492154269.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:49.816Z,1492154269.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:50.270Z,1492154270.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:50.317Z,1492154270.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:50.593Z,1492154270.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:50.626Z,1492154270.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:50.994Z,1492154270.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:51.010Z,1492154271.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:51.397Z,1492154271.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:51.412Z,1492154271.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:51.832Z,1492154271.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:51.862Z,1492154271.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:52.201Z,1492154272.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:52.230Z,1492154272.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:52.596Z,1492154272.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:52.637Z,1492154272.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:53.009Z,1492154273.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:53.036Z,1492154273.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:53.390Z,1492154273.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:53.406Z,1492154273.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:53.849Z,1492154273.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:53.897Z,1492154273.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:54.201Z,1492154274.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:54.246Z,1492154274.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:54.600Z,1492154274.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:54.616Z,1492154274.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:54.997Z,1492154274.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:55.013Z,1492154275.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:55.401Z,1492154275.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:55.422Z,1492154275.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:55.824Z,1492154275.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:55.880Z,1492154275.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:56.201Z,1492154276.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:56.237Z,1492154276.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:56.595Z,1492154276.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:56.611Z,1492154276.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:57.000Z,1492154277.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:57.016Z,1492154277.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:57.396Z,1492154277.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:57.412Z,1492154277.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:57.813Z,1492154277.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:57.864Z,1492154277.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:58.196Z,1492154278.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:58.218Z,1492154278.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:58.589Z,1492154278.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:17:58.622Z,1492154278.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:59.029Z,1492154279.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:59.434Z,1492154279.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:17:59.931Z,1492154279.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:00.247Z,1492154280.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:00.316Z,1492154280.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:00.638Z,1492154280.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:01.014Z,1492154281.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:01.112Z,1492154281.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:01.470Z,1492154281.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:01.854Z,1492154281.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:02.314Z,1492154282.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:02.672Z,1492154282.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:03.090Z,1492154283.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:03.423Z,1492154283.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:03.828Z,1492154283.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:04.358Z,1492154284.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:04.668Z,1492154284.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:05.026Z,1492154285.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:05.406Z,1492154285.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:05.851Z,1492154285.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:06.238Z,1492154286.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:06.614Z,1492154286.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:07.011Z,1492154287.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:07.414Z,1492154287.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:07.860Z,1492154287.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:08.227Z,1492154288.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:08.649Z,1492154288.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:09.032Z,1492154289.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:09.424Z,1492154289.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:09.853Z,1492154289.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:10.205Z,1492154290.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:10.651Z,1492154290.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:11.074Z,1492154291.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:11.435Z,1492154291.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:11.884Z,1492154291.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:12.245Z,1492154292.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:12.630Z,1492154292.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:13.049Z,1492154293.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:13.498Z,1492154293.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:14.032Z,1492154294.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:14.341Z,1492154294.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:14.653Z,1492154294.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:15.077Z,1492154295.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:15.444Z,1492154295.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:15.878Z,1492154295.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:16.407Z,1492154296.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:16.634Z,1492154296.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:17.036Z,1492154297.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:17.440Z,1492154297.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:17.844Z,1492154297.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:18.286Z,1492154298.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:18.661Z,1492154298.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:19.026Z,1492154299.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:19.452Z,1492154299.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:19.933Z,1492154299.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:20.234Z,1492154300.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:20.639Z,1492154300.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:21.046Z,1492154301.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:21.410Z,1492154301.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:21.878Z,1492154301.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:22.233Z,1492154302.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:22.634Z,1492154302.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:23.041Z,1492154303.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:26.803Z,1492154306.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:26.954Z,1492154306.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:27.358Z,1492154307.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:27.718Z,1492154307.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:28.135Z,1492154308.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:28.500Z,1492154308.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:28.914Z,1492154308.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:29.335Z,1492154309.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:29.689Z,1492154309.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:30.088Z,1492154310.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:30.491Z,1492154310.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:30.890Z,1492154310.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:31.281Z,1492154311.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:31.684Z,1492154311.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:32.092Z,1492154312.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:32.491Z,1492154312.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:32.888Z,1492154312.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:33.294Z,1492154313.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:33.772Z,1492154313.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:34.088Z,1492154314.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:34.503Z,1492154314.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:34.899Z,1492154314.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:35.302Z,1492154315.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:35.770Z,1492154315.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:36.088Z,1492154316.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:36.482Z,1492154316.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:36.890Z,1492154316.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:37.291Z,1492154317.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:37.806Z,1492154317.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:38.106Z,1492154318.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:38.512Z,1492154318.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:38.900Z,1492154318.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:39.290Z,1492154319.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:39.694Z,1492154319.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:39.818Z,1492154319.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:40.064Z,1492154320.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:40.080Z,1492154320.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:40.469Z,1492154320.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:40.543Z,1492154320.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:40.866Z,1492154320.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:40.887Z,1492154320.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:41.268Z,1492154321.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:41.318Z,1492154321.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:41.669Z,1492154321.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:41.718Z,1492154321.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:42.058Z,1492154322.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:42.094Z,1492154322.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:42.457Z,1492154322.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:42.490Z,1492154322.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:42.866Z,1492154322.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:42.910Z,1492154322.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:43.261Z,1492154323.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:43.287Z,1492154323.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:43.653Z,1492154323.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:43.698Z,1492154323.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:44.057Z,1492154324.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:44.090Z,1492154324.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:44.463Z,1492154324.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:44.479Z,1492154324.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:44.865Z,1492154324.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:44.910Z,1492154324.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:45.264Z,1492154325.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:45.312Z,1492154325.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:45.666Z,1492154325.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:45.681Z,1492154325.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:46.062Z,1492154326.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:46.200Z,1492154326.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:46.461Z,1492154326.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:46.494Z,1492154326.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:46.857Z,1492154326.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:46.889Z,1492154326.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:47.257Z,1492154327.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:47.293Z,1492154327.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:47.722Z,1492154327.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:47.774Z,1492154327.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:48.070Z,1492154328.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:48.085Z,1492154328.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:48.459Z,1492154328.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:48.493Z,1492154328.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:48.882Z,1492154328.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:48.905Z,1492154328.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:49.257Z,1492154329.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:49.294Z,1492154329.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:49.714Z,1492154329.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:49.752Z,1492154329.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:50.066Z,1492154330.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:50.090Z,1492154330.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:50.464Z,1492154330.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:50.480Z,1492154330.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:50.869Z,1492154330.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:50.928Z,1492154330.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:51.279Z,1492154331.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:51.331Z,1492154331.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:51.781Z,1492154331.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:51.822Z,1492154331.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:52.106Z,1492154332.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:52.175Z,1492154332.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:52.477Z,1492154332.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:52.594Z,1492154332.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:52.877Z,1492154332.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:52.916Z,1492154332.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:53.273Z,1492154333.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:53.326Z,1492154333.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:53.760Z,1492154333.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:53.813Z,1492154333.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:54.064Z,1492154334.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:54.117Z,1492154334.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:54.471Z,1492154334.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:54.525Z,1492154334.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:54.886Z,1492154334.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:18:54.981Z,1492154334.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:55.339Z,1492154335.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:55.718Z,1492154335.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:56.122Z,1492154336.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:56.496Z,1492154336.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:56.933Z,1492154336.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:57.313Z,1492154337.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:57.733Z,1492154337.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:58.234Z,1492154338.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:58.485Z,1492154338.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:58.876Z,1492154338.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:59.343Z,1492154339.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:18:59.738Z,1492154339.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:00.208Z,1492154340.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:00.507Z,1492154340.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:00.917Z,1492154340.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:01.298Z,1492154341.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:01.753Z,1492154341.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:02.094Z,1492154342.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:02.500Z,1492154342.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:02.898Z,1492154342.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:03.305Z,1492154343.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:03.867Z,1492154343.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:04.106Z,1492154344.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:04.521Z,1492154344.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:04.970Z,1492154344.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:05.346Z,1492154345.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:05.809Z,1492154345.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:06.095Z,1492154346.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:06.571Z,1492154346.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:06.940Z,1492154346.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:07.310Z,1492154347.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:07.810Z,1492154347.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:08.128Z,1492154348.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:08.486Z,1492154348.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:08.890Z,1492154348.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:09.281Z,1492154349.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:09.692Z,1492154349.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:10.072Z,1492154350.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:10.477Z,1492154350.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:10.882Z,1492154350.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:11.273Z,1492154351.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:11.690Z,1492154351.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:12.162Z,1492154352.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:12.484Z,1492154352.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:12.892Z,1492154352.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:13.290Z,1492154353.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:13.690Z,1492154353.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:14.209Z,1492154354.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:14.495Z,1492154354.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:14.893Z,1492154354.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:15.277Z,1492154355.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:15.716Z,1492154355.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:16.131Z,1492154356.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:16.490Z,1492154356.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:16.891Z,1492154356.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:17.290Z,1492154357.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:17.739Z,1492154357.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:18.124Z,1492154358.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:18.529Z,1492154358.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:18.894Z,1492154358.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:19.331Z,1492154359.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:19.748Z,1492154359.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:20.114Z,1492154360.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:20.507Z,1492154360.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:20.901Z,1492154360.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:21.294Z,1492154361.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:21.756Z,1492154361.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:22.101Z,1492154362.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:22.481Z,1492154362.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:22.914Z,1492154362.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:23.276Z,1492154363.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:24.168Z,1492154364.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:24.964Z,1492154364.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:26.974Z,1492154366.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:27.084Z,1492154367.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:27.485Z,1492154367.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:27.880Z,1492154367.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:28.283Z,1492154368.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:28.686Z,1492154368.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:29.078Z,1492154369.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:29.486Z,1492154369.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:29.886Z,1492154369.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:30.286Z,1492154370.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:30.678Z,1492154370.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:31.120Z,1492154371.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:31.485Z,1492154371.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:31.885Z,1492154371.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:32.302Z,1492154372.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:32.682Z,1492154372.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:33.130Z,1492154373.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:33.490Z,1492154373.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:33.946Z,1492154373.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:34.291Z,1492154374.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:34.687Z,1492154374.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:35.091Z,1492154375.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:35.491Z,1492154375.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:35.882Z,1492154375.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:36.282Z,1492154376.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:36.682Z,1492154376.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:37.083Z,1492154377.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:37.480Z,1492154377.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:37.877Z,1492154377.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:38.327Z,1492154378.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:38.677Z,1492154378.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:38.924Z,1492154378.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:39.078Z,1492154379.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:39.479Z,1492154379.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:39.720Z,1492154379.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:39.890Z,1492154379.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:40.287Z,1492154380.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:40.737Z,1492154380.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:41.090Z,1492154381.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:41.490Z,1492154381.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:41.884Z,1492154381.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:42.286Z,1492154382.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:42.682Z,1492154382.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:43.084Z,1492154383.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:43.490Z,1492154383.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:43.905Z,1492154383.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:44.298Z,1492154384.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:44.730Z,1492154384.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:45.085Z,1492154385.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:45.481Z,1492154385.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:45.906Z,1492154385.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:46.285Z,1492154386.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:46.684Z,1492154386.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:47.124Z,1492154387.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:47.490Z,1492154387.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:47.925Z,1492154387.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:48.299Z,1492154388.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:48.706Z,1492154388.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:49.105Z,1492154389.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:49.482Z,1492154389.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:49.894Z,1492154389.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:50.288Z,1492154390.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:50.690Z,1492154390.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:51.084Z,1492154391.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:51.488Z,1492154391.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:51.902Z,1492154391.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:52.292Z,1492154392.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:52.692Z,1492154392.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:52.904Z,1492154392.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:53.089Z,1492154393.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:53.484Z,1492154393.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:53.700Z,1492154393.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:53.892Z,1492154393.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:54.295Z,1492154394.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:54.440Z,1492154394.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:54.693Z,1492154394.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:55.093Z,1492154395.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:55.236Z,1492154395.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:55.493Z,1492154395.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:55.891Z,1492154395.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:56.036Z,1492154396.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:56.297Z,1492154396.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:56.456Z,1492154396.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:56.676Z,1492154396.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:57.075Z,1492154397.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:57.252Z,1492154397.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:57.475Z,1492154397.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:57.881Z,1492154397.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:58.010Z,1492154398.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:58.285Z,1492154398.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:58.687Z,1492154398.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:58.804Z,1492154398.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:59.110Z,1492154399.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:59.481Z,1492154399.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:19:59.600Z,1492154399.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:19:59.899Z,1492154399.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:00.008Z,1492154400.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:00.322Z,1492154400.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:00.675Z,1492154400.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:00.804Z,1492154400.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:01.076Z,1492154401.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:01.507Z,1492154401.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:01.600Z,1492154401.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:01.881Z,1492154401.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:02.008Z,1492154402.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:02.320Z,1492154402.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:02.711Z,1492154402.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:02.804Z,1492154402.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:03.080Z,1492154403.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:03.500Z,1492154403.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:03.600Z,1492154403.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:03.880Z,1492154403.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:04.012Z,1492154404.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:04.277Z,1492154404.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:04.676Z,1492154404.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:04.808Z,1492154404.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:05.080Z,1492154405.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:05.482Z,1492154405.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:05.606Z,1492154405.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:05.882Z,1492154405.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:06.088Z,1492154406.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:06.280Z,1492154406.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:06.280Z,1492154406.280 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:20:06.280Z,1492154406.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:20:06.287Z,1492154406.287 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:06.287Z,1492154406.287 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:20:06.287Z,1492154406.287 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:20:06.303Z,1492154406.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:20:06.303Z,1492154406.303 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:20:06.745Z,1492154406.745 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:20:06.745Z,1492154406.745 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:20:06.746Z,1492154406.746 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:20:06.746Z,1492154406.746 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:20:06.884Z,1492154406.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:07.080Z,1492154407.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:20:07.081Z,1492154407.081 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:20:07.081Z,1492154407.081 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:20:07.086Z,1492154407.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:20:07.087Z,1492154407.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:20:07.087Z,1492154407.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:20:07.484Z,1492154407.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:07.680Z,1492154407.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:07.890Z,1492154407.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:08.306Z,1492154408.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:08.444Z,1492154408.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:08.666Z,1492154408.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:09.072Z,1492154409.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:09.240Z,1492154409.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:09.476Z,1492154409.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:09.878Z,1492154409.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:10.036Z,1492154410.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:10.274Z,1492154410.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:10.441Z,1492154410.441 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:10.676Z,1492154410.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:11.075Z,1492154411.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:11.237Z,1492154411.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:11.474Z,1492154411.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:11.877Z,1492154411.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:11.988Z,1492154411.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:12.278Z,1492154412.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:12.681Z,1492154412.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:12.786Z,1492154412.786 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:13.085Z,1492154413.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:13.486Z,1492154413.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:13.580Z,1492154413.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:13.899Z,1492154413.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:13.992Z,1492154413.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:14.287Z,1492154414.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:14.711Z,1492154414.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:14.788Z,1492154414.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:15.094Z,1492154415.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:15.475Z,1492154415.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:15.586Z,1492154415.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:15.906Z,1492154415.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:15.993Z,1492154415.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:16.286Z,1492154416.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:16.710Z,1492154416.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:16.788Z,1492154416.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:17.110Z,1492154417.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:17.481Z,1492154417.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:17.586Z,1492154417.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:17.891Z,1492154417.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:17.992Z,1492154417.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:18.291Z,1492154418.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:18.690Z,1492154418.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:18.788Z,1492154418.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:19.088Z,1492154419.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:19.469Z,1492154419.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:19.586Z,1492154419.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:19.897Z,1492154419.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:20.072Z,1492154420.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:20.289Z,1492154420.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:20.669Z,1492154420.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:20.868Z,1492154420.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:21.074Z,1492154421.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:21.472Z,1492154421.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:21.666Z,1492154421.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:21.908Z,1492154421.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:22.296Z,1492154422.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:22.428Z,1492154422.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:22.688Z,1492154422.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:23.077Z,1492154423.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:23.224Z,1492154423.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:23.478Z,1492154423.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:24.020Z,1492154424.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:24.425Z,1492154424.425 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:25.220Z,1492154425.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:25.960Z,1492154425.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:26.756Z,1492154426.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:27.554Z,1492154427.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:27.722Z,1492154427.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:27.862Z,1492154427.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:27.960Z,1492154427.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:28.276Z,1492154428.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:28.650Z,1492154428.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:28.756Z,1492154428.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:29.150Z,1492154429.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:29.449Z,1492154429.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:29.552Z,1492154429.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:29.834Z,1492154429.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:29.964Z,1492154429.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:30.278Z,1492154430.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:30.657Z,1492154430.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:30.760Z,1492154430.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:31.066Z,1492154431.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:31.474Z,1492154431.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:31.556Z,1492154431.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:31.853Z,1492154431.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:31.976Z,1492154431.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:32.242Z,1492154432.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:32.642Z,1492154432.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:32.772Z,1492154432.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:33.046Z,1492154433.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:33.438Z,1492154433.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:33.568Z,1492154433.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:33.838Z,1492154433.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:34.052Z,1492154434.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:34.246Z,1492154434.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:34.642Z,1492154434.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:34.848Z,1492154434.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:35.042Z,1492154435.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:35.439Z,1492154435.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:35.644Z,1492154435.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:35.854Z,1492154435.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:36.238Z,1492154436.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:36.372Z,1492154436.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:36.654Z,1492154436.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:37.057Z,1492154437.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:37.168Z,1492154437.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:37.428Z,1492154437.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:37.827Z,1492154437.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:37.967Z,1492154437.967 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:38.237Z,1492154438.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:38.404Z,1492154438.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:38.663Z,1492154438.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:39.061Z,1492154439.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:39.200Z,1492154439.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:39.462Z,1492154439.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:39.840Z,1492154439.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:39.932Z,1492154439.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:40.237Z,1492154440.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:40.244Z,1492154440.244 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:40.244Z,1492154440.244 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:20:40.244Z,1492154440.244 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:20:40.258Z,1492154440.258 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:20:40.648Z,1492154440.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:40.690Z,1492154440.690 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:20:40.690Z,1492154440.690 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:20:40.728Z,1492154440.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:41.042Z,1492154441.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:41.048Z,1492154441.048 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:20:41.048Z,1492154441.048 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:20:41.049Z,1492154441.049 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:20:41.446Z,1492154441.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:41.524Z,1492154441.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:41.834Z,1492154441.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:41.928Z,1492154441.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:42.228Z,1492154442.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:42.636Z,1492154442.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:42.724Z,1492154442.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:43.082Z,1492154443.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:43.520Z,1492154443.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:43.638Z,1492154443.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:43.925Z,1492154443.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:43.952Z,1492154443.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:44.269Z,1492154444.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:44.637Z,1492154444.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:44.748Z,1492154444.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:45.067Z,1492154445.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:45.515Z,1492154445.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:45.544Z,1492154445.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:45.857Z,1492154445.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:46.228Z,1492154446.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:46.340Z,1492154446.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:46.654Z,1492154446.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:46.744Z,1492154446.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:47.050Z,1492154447.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:47.431Z,1492154447.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:47.540Z,1492154447.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:47.833Z,1492154447.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:48.020Z,1492154448.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:48.232Z,1492154448.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:48.634Z,1492154448.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:48.816Z,1492154448.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:49.059Z,1492154449.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:49.429Z,1492154449.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:49.612Z,1492154449.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:49.839Z,1492154449.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:50.245Z,1492154450.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:50.356Z,1492154450.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:50.638Z,1492154450.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:51.049Z,1492154451.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:51.152Z,1492154451.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:51.449Z,1492154451.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:51.844Z,1492154451.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:51.950Z,1492154451.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:52.228Z,1492154452.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:52.368Z,1492154452.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:52.642Z,1492154452.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:53.037Z,1492154453.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:53.164Z,1492154453.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:53.479Z,1492154453.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:53.849Z,1492154453.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:53.929Z,1492154453.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:54.248Z,1492154454.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:54.648Z,1492154454.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:54.724Z,1492154454.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:55.049Z,1492154455.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:55.478Z,1492154455.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:55.520Z,1492154455.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:55.862Z,1492154455.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:55.924Z,1492154455.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:56.265Z,1492154456.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:56.640Z,1492154456.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:56.720Z,1492154456.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:57.040Z,1492154457.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:57.516Z,1492154457.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:57.555Z,1492154457.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:57.889Z,1492154457.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:57.928Z,1492154457.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:58.246Z,1492154458.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:58.691Z,1492154458.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:58.724Z,1492154458.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:59.082Z,1492154459.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:59.520Z,1492154459.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:20:59.528Z,1492154459.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:59.881Z,1492154459.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:20:59.924Z,1492154459.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:00.294Z,1492154460.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:00.665Z,1492154460.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:00.720Z,1492154460.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:01.048Z,1492154461.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:01.459Z,1492154461.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:01.516Z,1492154461.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:01.862Z,1492154461.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:02.020Z,1492154462.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:02.262Z,1492154462.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:02.642Z,1492154462.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:02.818Z,1492154462.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:03.046Z,1492154463.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:03.442Z,1492154463.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:03.612Z,1492154463.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:03.845Z,1492154463.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:04.242Z,1492154464.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:04.344Z,1492154464.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:04.641Z,1492154464.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:05.038Z,1492154465.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:05.142Z,1492154465.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:05.442Z,1492154465.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:05.841Z,1492154465.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:05.937Z,1492154465.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:06.246Z,1492154466.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:06.349Z,1492154466.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:06.650Z,1492154466.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:07.051Z,1492154467.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:07.144Z,1492154467.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:07.520Z,1492154467.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:07.836Z,1492154467.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:07.896Z,1492154467.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:08.238Z,1492154468.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:08.638Z,1492154468.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:08.692Z,1492154468.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:09.038Z,1492154469.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:09.488Z,1492154469.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:09.525Z,1492154469.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:09.849Z,1492154469.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:09.904Z,1492154469.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:10.246Z,1492154470.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:10.646Z,1492154470.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:10.700Z,1492154470.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:11.040Z,1492154471.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:11.496Z,1492154471.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:11.513Z,1492154471.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:11.828Z,1492154471.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:11.904Z,1492154471.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:12.290Z,1492154472.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:12.637Z,1492154472.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:12.701Z,1492154472.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:13.035Z,1492154473.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:13.496Z,1492154473.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:13.550Z,1492154473.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:13.841Z,1492154473.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:13.900Z,1492154473.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:14.258Z,1492154474.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:14.678Z,1492154474.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:14.696Z,1492154474.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:15.045Z,1492154475.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:15.436Z,1492154475.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:15.492Z,1492154475.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:15.854Z,1492154475.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:15.980Z,1492154475.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:16.248Z,1492154476.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:16.651Z,1492154476.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:16.776Z,1492154476.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:17.043Z,1492154477.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:17.431Z,1492154477.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:17.572Z,1492154477.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:17.828Z,1492154477.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:18.236Z,1492154478.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:18.344Z,1492154478.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:18.635Z,1492154478.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:19.034Z,1492154479.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:19.140Z,1492154479.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:19.438Z,1492154479.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:19.836Z,1492154479.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:19.936Z,1492154479.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:20.246Z,1492154480.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:20.341Z,1492154480.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:20.650Z,1492154480.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:21.044Z,1492154481.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:21.136Z,1492154481.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:21.495Z,1492154481.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:21.858Z,1492154481.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:21.904Z,1492154481.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:22.254Z,1492154482.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:22.653Z,1492154482.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:22.700Z,1492154482.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:23.051Z,1492154483.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:23.492Z,1492154483.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:23.496Z,1492154483.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:23.840Z,1492154483.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:23.900Z,1492154483.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:24.696Z,1492154484.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:25.492Z,1492154485.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:25.896Z,1492154485.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:26.692Z,1492154486.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:27.488Z,1492154487.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:27.686Z,1492154487.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:27.827Z,1492154487.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:27.892Z,1492154487.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:28.191Z,1492154488.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:28.633Z,1492154488.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:28.688Z,1492154488.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:29.002Z,1492154489.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:29.406Z,1492154489.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:29.489Z,1492154489.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:29.818Z,1492154489.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:29.956Z,1492154489.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:30.205Z,1492154490.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:30.585Z,1492154490.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:30.752Z,1492154490.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:30.986Z,1492154490.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:31.390Z,1492154491.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:31.548Z,1492154491.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:31.787Z,1492154491.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:32.190Z,1492154492.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:32.305Z,1492154492.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:32.594Z,1492154492.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:32.993Z,1492154492.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:33.100Z,1492154493.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:33.388Z,1492154493.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:33.796Z,1492154493.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:33.901Z,1492154493.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:34.184Z,1492154494.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:34.320Z,1492154494.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:34.586Z,1492154494.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:34.989Z,1492154494.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:35.116Z,1492154495.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:35.481Z,1492154495.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:35.792Z,1492154495.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:35.840Z,1492154495.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:36.193Z,1492154496.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:36.590Z,1492154496.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:36.636Z,1492154496.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:36.989Z,1492154496.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:37.434Z,1492154497.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:37.482Z,1492154497.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:37.801Z,1492154497.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:37.852Z,1492154497.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:38.202Z,1492154498.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:38.598Z,1492154498.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:38.648Z,1492154498.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:38.991Z,1492154498.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:39.444Z,1492154499.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:39.495Z,1492154499.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:39.795Z,1492154499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:39.848Z,1492154499.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:40.202Z,1492154500.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:40.589Z,1492154500.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:40.644Z,1492154500.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:40.987Z,1492154500.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:41.440Z,1492154501.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:41.517Z,1492154501.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:41.844Z,1492154501.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:41.858Z,1492154501.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:42.200Z,1492154502.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:42.640Z,1492154502.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:42.643Z,1492154502.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:42.981Z,1492154502.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:43.424Z,1492154503.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:43.436Z,1492154503.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:43.826Z,1492154503.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:43.940Z,1492154503.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:44.185Z,1492154504.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:44.592Z,1492154504.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:44.736Z,1492154504.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:44.996Z,1492154504.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:45.386Z,1492154505.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:45.532Z,1492154505.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:45.788Z,1492154505.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:46.197Z,1492154506.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:46.289Z,1492154506.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:46.596Z,1492154506.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:46.996Z,1492154506.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:47.084Z,1492154507.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:47.397Z,1492154507.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:47.797Z,1492154507.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:47.880Z,1492154507.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:48.184Z,1492154508.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:48.288Z,1492154508.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:48.583Z,1492154508.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:48.985Z,1492154508.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:49.084Z,1492154509.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:49.462Z,1492154509.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:49.797Z,1492154509.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:49.836Z,1492154509.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:50.209Z,1492154510.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:50.598Z,1492154510.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:50.632Z,1492154510.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:50.997Z,1492154510.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:51.428Z,1492154511.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:51.465Z,1492154511.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:51.790Z,1492154511.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:51.844Z,1492154511.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:52.185Z,1492154512.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:52.585Z,1492154512.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:52.640Z,1492154512.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:52.990Z,1492154512.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:53.436Z,1492154513.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:53.455Z,1492154513.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:53.805Z,1492154513.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:53.848Z,1492154513.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:54.190Z,1492154514.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:54.584Z,1492154514.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:54.644Z,1492154514.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:54.984Z,1492154514.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:55.440Z,1492154515.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:55.457Z,1492154515.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:55.844Z,1492154515.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:55.850Z,1492154515.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:56.182Z,1492154516.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:56.584Z,1492154516.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:56.640Z,1492154516.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:57.021Z,1492154517.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:57.388Z,1492154517.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:57.436Z,1492154517.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:57.811Z,1492154517.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:57.916Z,1492154517.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:58.215Z,1492154518.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:58.596Z,1492154518.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:58.712Z,1492154518.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:58.979Z,1492154518.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:59.382Z,1492154519.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:21:59.508Z,1492154519.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:21:59.778Z,1492154519.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:00.184Z,1492154520.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:00.277Z,1492154520.277 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:00.593Z,1492154520.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:00.988Z,1492154520.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:01.072Z,1492154521.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:01.390Z,1492154521.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:01.868Z,1492154521.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:01.874Z,1492154521.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:02.174Z,1492154522.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:02.276Z,1492154522.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:02.603Z,1492154522.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:02.986Z,1492154522.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:03.072Z,1492154523.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:03.459Z,1492154523.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:03.784Z,1492154523.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:03.812Z,1492154523.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:04.190Z,1492154524.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:04.582Z,1492154524.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:04.608Z,1492154524.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:04.984Z,1492154524.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:05.410Z,1492154525.411 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:05.453Z,1492154525.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:05.785Z,1492154525.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:05.840Z,1492154525.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:06.194Z,1492154526.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:06.593Z,1492154526.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:06.636Z,1492154526.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:06.993Z,1492154526.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:07.426Z,1492154527.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:07.432Z,1492154527.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:07.825Z,1492154527.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:08.128Z,1492154528.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:08.192Z,1492154528.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:08.588Z,1492154528.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:08.924Z,1492154528.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:08.995Z,1492154528.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:09.451Z,1492154529.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:09.720Z,1492154529.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:09.800Z,1492154529.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:10.124Z,1492154530.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:10.262Z,1492154530.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:10.593Z,1492154530.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:10.923Z,1492154530.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:11.010Z,1492154531.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:11.394Z,1492154531.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:11.720Z,1492154531.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:11.859Z,1492154531.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:12.124Z,1492154532.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:12.252Z,1492154532.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:12.674Z,1492154532.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:12.920Z,1492154532.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:13.064Z,1492154533.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:13.471Z,1492154533.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:13.716Z,1492154533.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:13.874Z,1492154533.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:14.256Z,1492154534.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:14.275Z,1492154534.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:14.680Z,1492154534.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:15.056Z,1492154535.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:15.121Z,1492154535.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:15.458Z,1492154535.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:15.862Z,1492154535.862 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:15.932Z,1492154535.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:16.262Z,1492154536.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:16.284Z,1492154536.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:16.657Z,1492154536.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:17.088Z,1492154537.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:17.195Z,1492154537.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:17.653Z,1492154537.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:17.816Z,1492154537.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:17.940Z,1492154537.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:18.331Z,1492154538.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:18.612Z,1492154538.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:18.744Z,1492154538.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:19.090Z,1492154539.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:19.408Z,1492154539.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:19.502Z,1492154539.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:19.844Z,1492154539.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:19.913Z,1492154539.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:20.293Z,1492154540.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:20.640Z,1492154540.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:20.698Z,1492154540.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:21.076Z,1492154541.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:21.437Z,1492154541.437 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:21.472Z,1492154541.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:21.844Z,1492154541.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:21.888Z,1492154541.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:22.277Z,1492154542.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:22.641Z,1492154542.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:22.661Z,1492154542.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:23.114Z,1492154543.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:23.143Z,1492154543.143 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:22:23.151Z,1492154543.151 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:22:23.151Z,1492154543.151 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:22:23.152Z,1492154543.151 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:22:23.436Z,1492154543.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:23.495Z,1492154543.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:23.532Z,1492154543.532 [Default:CheckIn:D] Stopped
2017-04-14T07:22:23.532Z,1492154543.532 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:22:23.840Z,1492154543.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:23.898Z,1492154543.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:23.935Z,1492154543.935 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 236.303548 min 
2017-04-14T07:22:23.935Z,1492154543.935 [Default:CheckIn:E] Stopped
2017-04-14T07:22:23.936Z,1492154543.935 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:22:23.936Z,1492154543.935 [Default:CheckIn] Stopped
2017-04-14T07:22:23.936Z,1492154543.936 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:22:23.936Z,1492154543.936 [Default:CheckIn](INFO): Running loop #34
2017-04-14T07:22:23.936Z,1492154543.936 [Default:CheckIn] Running Loop=34
2017-04-14T07:22:23.936Z,1492154543.936 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:22:23.936Z,1492154543.936 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:22:24.341Z,1492154544.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:24.636Z,1492154544.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:25.434Z,1492154545.434 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:25.884Z,1492154545.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:26.681Z,1492154546.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:27.476Z,1492154547.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:27.939Z,1492154547.939 [NAL9602](INFO): Powering up
2017-04-14T07:22:27.973Z,1492154547.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:28.020Z,1492154548.020 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:22:28.128Z,1492154548.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:28.208Z,1492154548.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:28.512Z,1492154548.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:28.928Z,1492154548.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:29.004Z,1492154549.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:29.278Z,1492154549.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:29.737Z,1492154549.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:29.801Z,1492154549.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:30.094Z,1492154550.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:30.241Z,1492154550.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:30.536Z,1492154550.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:30.900Z,1492154550.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:31.362Z,1492154551.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:31.693Z,1492154551.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:32.090Z,1492154552.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:32.498Z,1492154552.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:32.902Z,1492154552.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:33.365Z,1492154553.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:33.701Z,1492154553.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:34.086Z,1492154554.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:34.516Z,1492154554.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:34.906Z,1492154554.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:35.276Z,1492154555.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:35.697Z,1492154555.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:36.102Z,1492154556.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:36.490Z,1492154556.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:36.961Z,1492154556.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:37.396Z,1492154557.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:37.694Z,1492154557.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:38.093Z,1492154558.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:38.550Z,1492154558.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:38.853Z,1492154558.852 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:22:38.906Z,1492154558.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:39.301Z,1492154559.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:39.718Z,1492154559.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:40.108Z,1492154560.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:40.514Z,1492154560.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:40.902Z,1492154560.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:41.298Z,1492154561.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:41.707Z,1492154561.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:42.154Z,1492154562.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:42.542Z,1492154562.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:42.911Z,1492154562.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:43.334Z,1492154563.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:43.691Z,1492154563.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:44.114Z,1492154564.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:44.502Z,1492154564.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:44.933Z,1492154564.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:45.366Z,1492154565.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:45.718Z,1492154565.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:46.094Z,1492154566.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:46.491Z,1492154566.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:46.896Z,1492154566.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:47.387Z,1492154567.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:47.706Z,1492154567.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:48.093Z,1492154568.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:48.497Z,1492154568.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:48.912Z,1492154568.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:49.383Z,1492154569.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:49.702Z,1492154569.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:50.111Z,1492154570.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:50.505Z,1492154570.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:50.553Z,1492154570.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:50.881Z,1492154570.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:51.348Z,1492154571.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:51.378Z,1492154571.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:51.707Z,1492154571.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:51.756Z,1492154571.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:52.099Z,1492154572.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:52.515Z,1492154572.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:52.552Z,1492154572.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:52.908Z,1492154572.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:53.294Z,1492154573.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:53.348Z,1492154573.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:53.697Z,1492154573.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:53.832Z,1492154573.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:54.097Z,1492154574.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:54.497Z,1492154574.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:54.628Z,1492154574.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:54.898Z,1492154574.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:55.300Z,1492154575.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:55.426Z,1492154575.427 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:22:55.768Z,1492154575.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:56.114Z,1492154576.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:56.510Z,1492154576.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:56.946Z,1492154576.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:57.296Z,1492154577.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:57.693Z,1492154577.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:58.114Z,1492154578.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:58.502Z,1492154578.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:58.936Z,1492154578.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:59.423Z,1492154579.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:22:59.698Z,1492154579.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:00.119Z,1492154580.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:00.516Z,1492154580.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:00.912Z,1492154580.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:01.409Z,1492154581.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:01.725Z,1492154581.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:02.098Z,1492154582.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:02.490Z,1492154582.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:02.890Z,1492154582.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:03.396Z,1492154583.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:03.702Z,1492154583.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:04.088Z,1492154584.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:04.552Z,1492154584.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:04.982Z,1492154584.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:05.504Z,1492154585.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:05.710Z,1492154585.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:06.110Z,1492154586.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:06.501Z,1492154586.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:06.906Z,1492154586.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:07.302Z,1492154587.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:07.302Z,1492154587.302 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T07:23:07.302Z,1492154587.302 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:23:07.308Z,1492154587.309 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:07.309Z,1492154587.309 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T07:23:07.309Z,1492154587.309 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:23:07.324Z,1492154587.323 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:23:07.324Z,1492154587.324 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:23:07.752Z,1492154587.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:23:07.752Z,1492154587.752 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T07:23:07.752Z,1492154587.752 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:23:07.752Z,1492154587.753 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T07:23:08.097Z,1492154588.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:23:08.097Z,1492154588.097 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:23:08.098Z,1492154588.098 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:23:08.102Z,1492154588.102 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:23:08.102Z,1492154588.102 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:23:08.119Z,1492154588.119 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:23:08.494Z,1492154588.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:08.900Z,1492154588.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:09.304Z,1492154589.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:09.770Z,1492154589.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:10.103Z,1492154590.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:10.506Z,1492154590.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:10.898Z,1492154590.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:11.326Z,1492154591.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:11.814Z,1492154591.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:12.091Z,1492154592.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:12.498Z,1492154592.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:12.929Z,1492154592.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:13.380Z,1492154593.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:13.725Z,1492154593.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:14.150Z,1492154594.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:14.512Z,1492154594.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:14.891Z,1492154594.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:15.346Z,1492154595.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:15.693Z,1492154595.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:16.095Z,1492154596.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:16.495Z,1492154596.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:16.890Z,1492154596.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:17.363Z,1492154597.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:17.716Z,1492154597.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:18.087Z,1492154598.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:18.490Z,1492154598.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:18.894Z,1492154598.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:19.373Z,1492154599.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:19.692Z,1492154599.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:20.100Z,1492154600.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:20.498Z,1492154600.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:20.882Z,1492154600.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:21.309Z,1492154601.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:21.701Z,1492154601.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:22.092Z,1492154602.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:22.491Z,1492154602.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:22.893Z,1492154602.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:23.297Z,1492154603.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:23.770Z,1492154603.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:24.111Z,1492154604.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:24.505Z,1492154604.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:28.083Z,1492154608.082 [NAL9602](INFO): SBD MO Status=0, MOMSN=2127, MT Status=0, MTMSN=0
2017-04-14T07:23:28.083Z,1492154608.083 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:23:28.217Z,1492154608.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:28.337Z,1492154608.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:28.696Z,1492154608.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:29.070Z,1492154609.070 [NAL9602](INFO): GPS fix at 20170414T072350: (36.802348, -121.787119)
2017-04-14T07:23:29.180Z,1492154609.180 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:23:29.180Z,1492154609.180 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:23:29.512Z,1492154609.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:29.512Z,1492154609.512 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:23:29.512Z,1492154609.512 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:23:29.524Z,1492154609.524 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:29.525Z,1492154609.524 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:23:29.525Z,1492154609.525 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:23:29.554Z,1492154609.554 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:23:29.554Z,1492154609.554 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:23:29.963Z,1492154609.963 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:23:29.963Z,1492154609.963 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:23:29.964Z,1492154609.964 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:23:29.964Z,1492154609.964 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:23:30.329Z,1492154610.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:23:30.330Z,1492154610.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:23:30.330Z,1492154610.330 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:23:30.336Z,1492154610.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:23:30.336Z,1492154610.336 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:23:30.337Z,1492154610.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:23:33.893Z,1492154613.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:34.057Z,1492154614.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:34.371Z,1492154614.371 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0140.lzma
2017-04-14T07:23:34.410Z,1492154614.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:34.814Z,1492154614.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:35.162Z,1492154615.162 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0140.lzma.bak
2017-04-14T07:23:35.162Z,1492154615.162 [DataOverHttps](INFO): SBD MOMSN=4885418
2017-04-14T07:23:35.239Z,1492154615.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:35.690Z,1492154615.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:36.013Z,1492154616.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:39.392Z,1492154619.392 [NAL9602](INFO): Powering down
2017-04-14T07:23:39.427Z,1492154619.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:39.592Z,1492154619.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:39.964Z,1492154619.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:40.368Z,1492154620.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:40.743Z,1492154620.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:41.144Z,1492154621.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:41.171Z,1492154621.171 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:41.172Z,1492154621.172 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:23:41.172Z,1492154621.172 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:23:41.251Z,1492154621.251 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:23:44.682Z,1492154624.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:44.701Z,1492154624.701 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:23:44.701Z,1492154624.701 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:23:44.773Z,1492154624.773 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0141.lzma
2017-04-14T07:23:44.858Z,1492154624.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:44.874Z,1492154624.874 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:23:44.874Z,1492154624.874 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:23:44.874Z,1492154624.874 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:23:45.250Z,1492154625.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:47.012Z,1492154627.011 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0141.lzma.bak
2017-04-14T07:23:47.012Z,1492154627.012 [DataOverHttps](INFO): SBD MOMSN=4885421
2017-04-14T07:23:47.098Z,1492154627.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:47.366Z,1492154627.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:47.387Z,1492154627.388 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:23:47.388Z,1492154627.388 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:23:47.388Z,1492154627.388 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:23:47.686Z,1492154627.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:51.102Z,1492154631.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:51.246Z,1492154631.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:51.731Z,1492154631.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:52.030Z,1492154632.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:52.102Z,1492154632.102 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:23:52.466Z,1492154632.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:52.827Z,1492154632.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:52.900Z,1492154632.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:23:53.226Z,1492154633.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:53.693Z,1492154633.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:54.007Z,1492154634.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:54.414Z,1492154634.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:54.833Z,1492154634.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:55.317Z,1492154635.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:55.621Z,1492154635.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:56.018Z,1492154636.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:56.426Z,1492154636.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:56.826Z,1492154636.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:57.319Z,1492154637.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:57.626Z,1492154637.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:58.025Z,1492154638.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:58.425Z,1492154638.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:58.824Z,1492154638.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:59.320Z,1492154639.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:23:59.630Z,1492154639.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:00.086Z,1492154640.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:00.417Z,1492154640.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:00.894Z,1492154640.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:01.312Z,1492154641.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:01.642Z,1492154641.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:02.049Z,1492154642.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:02.430Z,1492154642.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:02.831Z,1492154642.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:03.226Z,1492154643.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:03.641Z,1492154643.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:04.059Z,1492154644.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:04.418Z,1492154644.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:04.532Z,1492154644.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:24:04.827Z,1492154644.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:05.224Z,1492154645.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:05.328Z,1492154645.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:24:05.717Z,1492154645.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:06.023Z,1492154646.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:06.411Z,1492154646.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:06.815Z,1492154646.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:07.221Z,1492154647.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:07.664Z,1492154647.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:08.014Z,1492154648.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:08.421Z,1492154648.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:08.818Z,1492154648.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:09.274Z,1492154649.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:09.617Z,1492154649.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:10.026Z,1492154650.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:10.430Z,1492154650.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:10.814Z,1492154650.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:11.296Z,1492154651.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:11.626Z,1492154651.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:12.030Z,1492154652.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:12.424Z,1492154652.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:12.802Z,1492154652.802 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T07:24:12.802Z,1492154652.802 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:24:12.802Z,1492154652.802 [BPC1](ERROR): Data Fault
2017-04-14T07:24:12.836Z,1492154652.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:12.881Z,1492154652.881 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:24:13.266Z,1492154653.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:13.662Z,1492154653.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:14.026Z,1492154654.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:14.067Z,1492154654.066 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:24:14.067Z,1492154654.067 [BPC1] No Fault, FailCount= 1
2017-04-14T07:24:14.481Z,1492154654.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:14.887Z,1492154654.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:15.278Z,1492154655.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:15.618Z,1492154655.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:16.013Z,1492154656.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:16.426Z,1492154656.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:16.820Z,1492154656.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:17.226Z,1492154657.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:17.618Z,1492154657.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:17.744Z,1492154657.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:24:18.013Z,1492154658.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:18.438Z,1492154658.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:18.540Z,1492154658.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:24:18.816Z,1492154658.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:19.218Z,1492154659.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:19.714Z,1492154659.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:20.014Z,1492154660.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:20.414Z,1492154660.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:20.823Z,1492154660.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:21.215Z,1492154661.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:21.758Z,1492154661.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:22.042Z,1492154662.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:22.416Z,1492154662.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:22.814Z,1492154662.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:23.295Z,1492154663.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:23.645Z,1492154663.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:24.071Z,1492154664.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:24.427Z,1492154664.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:24.824Z,1492154664.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:25.270Z,1492154665.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:25.619Z,1492154665.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:26.025Z,1492154666.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:26.428Z,1492154666.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:26.846Z,1492154666.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:27.306Z,1492154667.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:27.648Z,1492154667.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:28.050Z,1492154668.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:28.440Z,1492154668.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:28.857Z,1492154668.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:29.302Z,1492154669.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:29.649Z,1492154669.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:30.013Z,1492154670.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:30.412Z,1492154670.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:30.818Z,1492154670.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:31.320Z,1492154671.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:31.615Z,1492154671.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:32.021Z,1492154672.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:32.420Z,1492154672.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:32.828Z,1492154672.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:33.214Z,1492154673.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:33.702Z,1492154673.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:34.035Z,1492154674.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:34.442Z,1492154674.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:34.840Z,1492154674.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:35.210Z,1492154675.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:35.688Z,1492154675.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:36.032Z,1492154676.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:36.420Z,1492154676.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:36.832Z,1492154676.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:37.260Z,1492154677.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:37.634Z,1492154677.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:38.009Z,1492154678.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:38.441Z,1492154678.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:38.804Z,1492154678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:39.256Z,1492154679.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:39.643Z,1492154679.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:40.018Z,1492154680.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:40.425Z,1492154680.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:40.833Z,1492154680.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:41.302Z,1492154681.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:41.637Z,1492154681.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:42.036Z,1492154682.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:42.446Z,1492154682.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:42.844Z,1492154682.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:43.242Z,1492154683.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:43.639Z,1492154683.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:44.022Z,1492154684.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:44.424Z,1492154684.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:44.826Z,1492154684.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:45.320Z,1492154685.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:45.628Z,1492154685.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:46.032Z,1492154686.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:46.422Z,1492154686.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:46.830Z,1492154686.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:47.222Z,1492154687.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:47.669Z,1492154687.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:48.040Z,1492154688.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:52.000Z,1492154692.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:52.194Z,1492154692.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:52.514Z,1492154692.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:52.966Z,1492154692.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:53.336Z,1492154693.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:53.731Z,1492154693.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:54.120Z,1492154694.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:54.522Z,1492154694.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:54.925Z,1492154694.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:55.346Z,1492154695.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:55.750Z,1492154695.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:56.124Z,1492154696.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:56.569Z,1492154696.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:56.996Z,1492154696.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:57.346Z,1492154697.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:57.742Z,1492154697.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:58.129Z,1492154698.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:58.563Z,1492154698.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:58.928Z,1492154698.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:59.306Z,1492154699.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:24:59.732Z,1492154699.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:00.110Z,1492154700.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:00.507Z,1492154700.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:00.910Z,1492154700.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:01.311Z,1492154701.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:01.710Z,1492154701.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:02.119Z,1492154702.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:02.516Z,1492154702.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:02.927Z,1492154702.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:03.311Z,1492154703.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:03.719Z,1492154703.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:04.130Z,1492154704.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:04.515Z,1492154704.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:04.927Z,1492154704.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:05.329Z,1492154705.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:05.734Z,1492154705.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:06.103Z,1492154706.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:06.511Z,1492154706.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:06.913Z,1492154706.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:07.314Z,1492154707.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:07.758Z,1492154707.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:08.120Z,1492154708.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:08.535Z,1492154708.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:08.921Z,1492154708.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:09.322Z,1492154709.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:09.801Z,1492154709.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:10.178Z,1492154710.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:10.525Z,1492154710.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:10.937Z,1492154710.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:11.310Z,1492154711.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:11.753Z,1492154711.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:12.130Z,1492154712.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:12.519Z,1492154712.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:12.915Z,1492154712.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:13.369Z,1492154713.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:13.760Z,1492154713.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:14.118Z,1492154714.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:14.523Z,1492154714.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:14.932Z,1492154714.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:15.380Z,1492154715.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:15.718Z,1492154715.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:16.121Z,1492154716.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:16.522Z,1492154716.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:16.917Z,1492154716.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:17.314Z,1492154717.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:17.717Z,1492154717.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:18.152Z,1492154718.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:18.524Z,1492154718.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:18.906Z,1492154718.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:19.366Z,1492154719.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:19.717Z,1492154719.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:20.164Z,1492154720.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:20.527Z,1492154720.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:20.918Z,1492154720.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:21.363Z,1492154721.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:21.715Z,1492154721.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:22.114Z,1492154722.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:22.518Z,1492154722.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:22.907Z,1492154722.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:23.342Z,1492154723.342 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T07:25:23.342Z,1492154723.342 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:25:23.342Z,1492154723.342 [BPC1](ERROR): Data Fault
2017-04-14T07:25:23.364Z,1492154723.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:23.449Z,1492154723.449 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:25:23.712Z,1492154723.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:24.120Z,1492154724.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:24.516Z,1492154724.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:24.552Z,1492154724.552 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:25:24.552Z,1492154724.552 [BPC1] No Fault, FailCount= 1
2017-04-14T07:25:24.967Z,1492154724.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:25.382Z,1492154725.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:25.735Z,1492154725.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:26.137Z,1492154726.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:26.593Z,1492154726.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:26.965Z,1492154726.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:27.343Z,1492154727.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:27.770Z,1492154727.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:28.116Z,1492154728.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:28.534Z,1492154728.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:28.906Z,1492154728.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:29.343Z,1492154729.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:29.742Z,1492154729.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:30.130Z,1492154730.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:30.565Z,1492154730.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:30.923Z,1492154730.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:31.335Z,1492154731.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:31.728Z,1492154731.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:32.174Z,1492154732.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:32.535Z,1492154732.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:32.938Z,1492154732.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:33.318Z,1492154733.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:33.722Z,1492154733.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:34.117Z,1492154734.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:34.516Z,1492154734.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:34.919Z,1492154734.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:35.311Z,1492154735.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:35.718Z,1492154735.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:36.111Z,1492154736.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:36.516Z,1492154736.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:36.930Z,1492154736.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:37.395Z,1492154737.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:37.712Z,1492154737.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:38.140Z,1492154738.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:38.555Z,1492154738.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:38.927Z,1492154738.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:39.364Z,1492154739.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:39.761Z,1492154739.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:40.119Z,1492154740.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:40.525Z,1492154740.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:40.927Z,1492154740.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:41.321Z,1492154741.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:41.720Z,1492154741.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:42.112Z,1492154742.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:42.352Z,1492154742.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:25:42.507Z,1492154742.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:42.931Z,1492154742.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:43.148Z,1492154743.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:25:43.384Z,1492154743.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:43.734Z,1492154743.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:44.113Z,1492154744.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:44.523Z,1492154744.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:44.921Z,1492154744.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:45.318Z,1492154745.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:45.717Z,1492154745.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:46.124Z,1492154746.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:46.506Z,1492154746.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:46.906Z,1492154746.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:47.312Z,1492154747.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:47.718Z,1492154747.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:48.115Z,1492154748.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:51.966Z,1492154751.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:52.095Z,1492154752.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:52.452Z,1492154752.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:52.899Z,1492154752.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:53.275Z,1492154753.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:53.679Z,1492154753.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:54.094Z,1492154754.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:54.457Z,1492154754.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:54.885Z,1492154754.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:55.259Z,1492154755.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:55.688Z,1492154755.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:56.065Z,1492154756.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:56.336Z,1492154756.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:25:56.461Z,1492154756.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:56.860Z,1492154756.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:57.132Z,1492154757.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:25:57.264Z,1492154757.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:57.661Z,1492154757.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:58.063Z,1492154758.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:58.464Z,1492154758.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:58.898Z,1492154758.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:59.262Z,1492154759.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:25:59.671Z,1492154759.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:00.075Z,1492154760.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:00.525Z,1492154760.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:00.895Z,1492154760.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:01.336Z,1492154761.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:01.693Z,1492154761.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:02.141Z,1492154762.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:02.488Z,1492154762.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:02.875Z,1492154762.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:03.273Z,1492154763.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:03.699Z,1492154763.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:04.070Z,1492154764.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:04.470Z,1492154764.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:04.872Z,1492154764.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:05.284Z,1492154765.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:05.666Z,1492154765.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:06.090Z,1492154766.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:06.483Z,1492154766.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:06.871Z,1492154766.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:07.272Z,1492154767.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:07.694Z,1492154767.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:08.073Z,1492154768.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:08.486Z,1492154768.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:08.873Z,1492154768.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:09.290Z,1492154769.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:09.672Z,1492154769.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:10.073Z,1492154770.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:10.471Z,1492154770.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:10.887Z,1492154770.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:11.273Z,1492154771.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:11.673Z,1492154771.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:12.068Z,1492154772.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:12.474Z,1492154772.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:12.887Z,1492154772.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:13.298Z,1492154773.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:13.660Z,1492154773.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:14.076Z,1492154774.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:14.468Z,1492154774.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:14.885Z,1492154774.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:15.264Z,1492154775.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:15.661Z,1492154775.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:16.068Z,1492154776.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:16.466Z,1492154776.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:16.870Z,1492154776.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:17.279Z,1492154777.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:17.663Z,1492154777.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:18.065Z,1492154778.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:18.463Z,1492154778.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:18.864Z,1492154778.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:19.262Z,1492154779.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:19.669Z,1492154779.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:20.063Z,1492154780.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:20.481Z,1492154780.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:20.867Z,1492154780.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:21.322Z,1492154781.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:21.746Z,1492154781.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:22.146Z,1492154782.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:22.466Z,1492154782.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:22.902Z,1492154782.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:23.305Z,1492154783.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:23.703Z,1492154783.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:24.070Z,1492154784.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:24.531Z,1492154784.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:24.882Z,1492154784.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:25.288Z,1492154785.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:25.680Z,1492154785.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:26.061Z,1492154786.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:26.474Z,1492154786.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:26.874Z,1492154786.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:27.265Z,1492154787.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:27.665Z,1492154787.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:28.064Z,1492154788.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:28.464Z,1492154788.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:28.868Z,1492154788.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:29.259Z,1492154789.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:29.664Z,1492154789.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:30.058Z,1492154790.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:30.462Z,1492154790.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:30.462Z,1492154790.462 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:26:30.462Z,1492154790.462 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:26:30.468Z,1492154790.468 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:30.469Z,1492154790.469 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:26:30.469Z,1492154790.469 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:26:30.513Z,1492154790.513 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:26:30.513Z,1492154790.513 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:26:30.911Z,1492154790.911 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:26:30.911Z,1492154790.911 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:26:30.912Z,1492154790.912 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:26:30.912Z,1492154790.912 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:26:31.289Z,1492154791.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:26:31.289Z,1492154791.289 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:26:31.290Z,1492154791.290 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:26:31.295Z,1492154791.295 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:26:31.295Z,1492154791.295 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:26:31.296Z,1492154791.296 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:26:31.688Z,1492154791.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:32.096Z,1492154792.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:32.476Z,1492154792.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:32.862Z,1492154792.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:33.344Z,1492154793.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:33.751Z,1492154793.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:34.104Z,1492154794.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:34.512Z,1492154794.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:34.939Z,1492154794.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:35.358Z,1492154795.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:35.672Z,1492154795.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:36.078Z,1492154796.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:36.458Z,1492154796.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:36.857Z,1492154796.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:37.264Z,1492154797.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:37.666Z,1492154797.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:38.066Z,1492154798.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:38.458Z,1492154798.458 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:26:38.458Z,1492154798.458 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:26:38.458Z,1492154798.458 [BPC1](ERROR): Communications Fault
2017-04-14T07:26:38.467Z,1492154798.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:38.498Z,1492154798.498 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:26:38.885Z,1492154798.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:39.267Z,1492154799.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:39.675Z,1492154799.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:39.734Z,1492154799.734 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:26:39.734Z,1492154799.734 [BPC1] No Fault, FailCount= 1
2017-04-14T07:26:40.138Z,1492154800.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:40.477Z,1492154800.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:40.890Z,1492154800.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:41.272Z,1492154801.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:41.673Z,1492154801.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:42.070Z,1492154802.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:42.474Z,1492154802.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:42.854Z,1492154802.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:43.270Z,1492154803.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:43.666Z,1492154803.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:44.095Z,1492154804.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:44.470Z,1492154804.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:44.860Z,1492154804.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:45.273Z,1492154805.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:45.279Z,1492154805.279 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:45.279Z,1492154805.279 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:26:45.279Z,1492154805.279 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:26:45.293Z,1492154805.293 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:26:45.676Z,1492154805.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:45.695Z,1492154805.695 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:26:45.695Z,1492154805.695 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:26:46.069Z,1492154806.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:46.075Z,1492154806.075 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:26:46.075Z,1492154806.075 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:26:46.075Z,1492154806.076 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:26:46.468Z,1492154806.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:46.928Z,1492154806.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:47.266Z,1492154807.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:47.658Z,1492154807.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:48.061Z,1492154808.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:48.462Z,1492154808.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:52.199Z,1492154812.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:52.321Z,1492154812.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:52.686Z,1492154812.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:53.093Z,1492154813.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:53.493Z,1492154813.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:53.916Z,1492154813.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:54.281Z,1492154814.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:54.752Z,1492154814.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:55.074Z,1492154815.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:55.543Z,1492154815.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:55.929Z,1492154815.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:56.284Z,1492154816.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:56.714Z,1492154816.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:57.172Z,1492154817.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:57.518Z,1492154817.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:57.909Z,1492154817.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:58.277Z,1492154818.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:58.669Z,1492154818.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:59.106Z,1492154819.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:59.510Z,1492154819.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:26:59.902Z,1492154819.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:00.312Z,1492154820.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:00.700Z,1492154820.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:01.128Z,1492154821.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:01.521Z,1492154821.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:01.883Z,1492154821.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:02.292Z,1492154822.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:02.688Z,1492154822.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:03.094Z,1492154823.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:03.484Z,1492154823.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:03.886Z,1492154823.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:04.294Z,1492154824.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:04.686Z,1492154824.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:05.101Z,1492154825.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:05.506Z,1492154825.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:05.874Z,1492154825.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:06.304Z,1492154826.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:06.678Z,1492154826.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:07.160Z,1492154827.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:07.506Z,1492154827.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:07.915Z,1492154827.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:08.319Z,1492154828.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:08.703Z,1492154828.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:09.117Z,1492154829.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:09.483Z,1492154829.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:09.914Z,1492154829.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:10.276Z,1492154830.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:10.705Z,1492154830.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:11.079Z,1492154831.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:11.534Z,1492154831.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:11.882Z,1492154831.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:12.290Z,1492154832.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:12.678Z,1492154832.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:13.080Z,1492154833.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:13.482Z,1492154833.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:13.885Z,1492154833.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:14.327Z,1492154834.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:14.684Z,1492154834.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:15.152Z,1492154835.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:15.529Z,1492154835.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:15.874Z,1492154835.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:16.285Z,1492154836.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:16.689Z,1492154836.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:17.082Z,1492154837.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:17.492Z,1492154837.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:17.936Z,1492154837.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:18.323Z,1492154838.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:18.708Z,1492154838.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:19.095Z,1492154839.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:19.481Z,1492154839.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:19.895Z,1492154839.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:20.213Z,1492154840.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:27:20.290Z,1492154840.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:20.679Z,1492154840.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:21.009Z,1492154841.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:27:21.087Z,1492154841.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:21.478Z,1492154841.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:21.878Z,1492154841.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:22.333Z,1492154842.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:22.683Z,1492154842.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:23.086Z,1492154843.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:23.485Z,1492154843.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:23.890Z,1492154843.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:24.291Z,1492154844.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:24.685Z,1492154844.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:25.090Z,1492154845.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:25.493Z,1492154845.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:25.884Z,1492154845.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:26.291Z,1492154846.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:26.658Z,1492154846.658 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:27:26.658Z,1492154846.658 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:27:26.658Z,1492154846.658 [BPC1](ERROR): Communications Fault
2017-04-14T07:27:26.667Z,1492154846.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:26.712Z,1492154846.712 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:27:27.093Z,1492154847.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:27.477Z,1492154847.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:27.877Z,1492154847.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:27.928Z,1492154847.928 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:27:27.928Z,1492154847.928 [BPC1] No Fault, FailCount= 1
2017-04-14T07:27:28.338Z,1492154848.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:28.680Z,1492154848.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:29.132Z,1492154849.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:29.490Z,1492154849.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:29.881Z,1492154849.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:30.293Z,1492154850.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:30.689Z,1492154850.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:31.078Z,1492154851.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:31.482Z,1492154851.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:31.928Z,1492154851.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:32.293Z,1492154852.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:32.690Z,1492154852.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:33.089Z,1492154853.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:33.485Z,1492154853.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:33.872Z,1492154853.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:34.298Z,1492154854.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:34.674Z,1492154854.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:35.099Z,1492154855.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:35.485Z,1492154855.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:35.893Z,1492154855.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:36.270Z,1492154856.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:36.700Z,1492154856.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:37.076Z,1492154857.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:37.473Z,1492154857.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:37.905Z,1492154857.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:38.275Z,1492154858.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:38.675Z,1492154858.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:39.082Z,1492154859.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:39.486Z,1492154859.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:39.882Z,1492154859.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:40.291Z,1492154860.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:40.681Z,1492154860.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:41.089Z,1492154861.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:41.484Z,1492154861.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:41.892Z,1492154861.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:42.301Z,1492154862.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:42.690Z,1492154862.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:43.154Z,1492154863.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:43.472Z,1492154863.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:43.922Z,1492154863.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:44.287Z,1492154864.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:44.714Z,1492154864.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:45.118Z,1492154865.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:45.494Z,1492154865.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:45.898Z,1492154865.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:46.294Z,1492154866.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:46.705Z,1492154866.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:47.078Z,1492154867.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:47.486Z,1492154867.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:47.886Z,1492154867.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:48.298Z,1492154868.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:48.785Z,1492154868.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:52.997Z,1492154872.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:53.163Z,1492154873.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:53.530Z,1492154873.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:53.925Z,1492154873.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:54.333Z,1492154874.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:54.725Z,1492154874.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:55.114Z,1492154875.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:55.535Z,1492154875.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:55.981Z,1492154875.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:56.335Z,1492154876.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:56.735Z,1492154876.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:57.114Z,1492154877.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:57.586Z,1492154877.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:57.918Z,1492154877.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:58.350Z,1492154878.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:58.748Z,1492154878.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:59.118Z,1492154879.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:59.514Z,1492154879.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:27:59.926Z,1492154879.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:00.319Z,1492154880.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:00.720Z,1492154880.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:01.140Z,1492154881.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:01.504Z,1492154881.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:01.909Z,1492154881.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:02.327Z,1492154882.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:02.706Z,1492154882.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:03.110Z,1492154883.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:03.518Z,1492154883.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:03.925Z,1492154883.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:04.327Z,1492154884.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:04.740Z,1492154884.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:05.206Z,1492154885.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:05.650Z,1492154885.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:05.960Z,1492154885.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:06.341Z,1492154886.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:06.804Z,1492154886.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:07.130Z,1492154887.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:07.530Z,1492154887.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:07.930Z,1492154887.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:08.341Z,1492154888.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:08.712Z,1492154888.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:09.122Z,1492154889.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:09.569Z,1492154889.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:09.924Z,1492154889.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:10.346Z,1492154890.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:10.725Z,1492154890.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:11.149Z,1492154891.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:11.546Z,1492154891.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:11.913Z,1492154891.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:12.314Z,1492154892.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:12.718Z,1492154892.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:13.135Z,1492154893.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:13.510Z,1492154893.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:13.912Z,1492154893.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:14.312Z,1492154894.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:14.702Z,1492154894.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:15.113Z,1492154895.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:15.518Z,1492154895.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:15.918Z,1492154895.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:16.317Z,1492154896.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:16.721Z,1492154896.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:17.122Z,1492154897.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:17.524Z,1492154897.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:17.988Z,1492154897.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:18.334Z,1492154898.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:18.714Z,1492154898.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:19.135Z,1492154899.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:19.522Z,1492154899.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:19.926Z,1492154899.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:20.319Z,1492154900.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:20.725Z,1492154900.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:21.130Z,1492154901.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:21.525Z,1492154901.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:21.934Z,1492154901.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:22.439Z,1492154902.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:22.734Z,1492154902.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:23.191Z,1492154903.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:23.518Z,1492154903.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:23.958Z,1492154903.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:24.354Z,1492154904.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:24.712Z,1492154904.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:25.121Z,1492154905.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:25.517Z,1492154905.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:25.930Z,1492154905.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:26.317Z,1492154906.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:26.721Z,1492154906.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:27.138Z,1492154907.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:27.506Z,1492154907.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:27.935Z,1492154907.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:28.314Z,1492154908.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:28.706Z,1492154908.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:29.114Z,1492154909.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:29.514Z,1492154909.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:29.922Z,1492154909.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:30.318Z,1492154910.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:30.728Z,1492154910.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:31.129Z,1492154911.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:31.522Z,1492154911.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:31.932Z,1492154911.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:32.318Z,1492154912.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:32.720Z,1492154912.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:33.122Z,1492154913.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:33.532Z,1492154913.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:33.931Z,1492154913.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:34.330Z,1492154914.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:34.812Z,1492154914.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:35.162Z,1492154915.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:35.520Z,1492154915.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:35.926Z,1492154915.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:36.362Z,1492154916.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:36.719Z,1492154916.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:37.138Z,1492154917.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:37.550Z,1492154917.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:37.933Z,1492154917.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:38.333Z,1492154918.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:38.795Z,1492154918.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:39.138Z,1492154919.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:39.519Z,1492154919.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:39.917Z,1492154919.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:40.314Z,1492154920.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:40.742Z,1492154920.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:41.110Z,1492154921.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:41.505Z,1492154921.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:41.905Z,1492154921.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:42.320Z,1492154922.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:42.713Z,1492154922.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:43.126Z,1492154923.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:43.517Z,1492154923.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:43.918Z,1492154923.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:44.316Z,1492154924.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:44.721Z,1492154924.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:45.117Z,1492154925.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:45.513Z,1492154925.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:45.918Z,1492154925.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:46.321Z,1492154926.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:46.721Z,1492154926.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:47.126Z,1492154927.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:47.513Z,1492154927.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:47.905Z,1492154927.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:47.914Z,1492154927.914 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:28:47.914Z,1492154927.914 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:28:47.914Z,1492154927.914 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:28:47.914Z,1492154927.914 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:28:48.385Z,1492154928.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:48.403Z,1492154928.402 [Default:CheckIn:D] Stopped
2017-04-14T07:28:48.403Z,1492154928.403 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:28:48.822Z,1492154928.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:48.863Z,1492154928.863 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 242.718066 min 
2017-04-14T07:28:48.863Z,1492154928.863 [Default:CheckIn:E] Stopped
2017-04-14T07:28:48.863Z,1492154928.864 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn] Stopped
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn](INFO): Running loop #35
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn] Running Loop=35
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:28:48.864Z,1492154928.864 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:28:52.306Z,1492154932.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:52.385Z,1492154932.385 [NAL9602](INFO): Powering up
2017-04-14T07:28:52.431Z,1492154932.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:52.869Z,1492154932.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:53.225Z,1492154933.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:53.582Z,1492154933.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:53.983Z,1492154933.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:54.391Z,1492154934.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:54.839Z,1492154934.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:55.203Z,1492154935.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:55.586Z,1492154935.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:55.988Z,1492154935.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:56.390Z,1492154936.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:56.833Z,1492154936.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:57.194Z,1492154937.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:57.592Z,1492154937.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:57.990Z,1492154937.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:58.076Z,1492154938.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:28:58.382Z,1492154938.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:58.792Z,1492154938.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:58.873Z,1492154938.873 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:28:59.318Z,1492154939.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:28:59.626Z,1492154939.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:00.022Z,1492154940.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:00.394Z,1492154940.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:00.810Z,1492154940.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:01.305Z,1492154941.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:01.618Z,1492154941.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:02.056Z,1492154942.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:02.411Z,1492154942.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:02.847Z,1492154942.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:03.222Z,1492154943.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:03.541Z,1492154943.541 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:29:03.598Z,1492154943.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:04.001Z,1492154944.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:04.445Z,1492154944.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:04.850Z,1492154944.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:05.237Z,1492154945.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:05.629Z,1492154945.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:06.009Z,1492154946.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:06.400Z,1492154946.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:06.851Z,1492154946.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:07.232Z,1492154947.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:07.618Z,1492154947.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:07.983Z,1492154947.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:08.377Z,1492154948.377 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:29:08.377Z,1492154948.377 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:29:08.377Z,1492154948.378 [BPC1](ERROR): Communications Fault
2017-04-14T07:29:08.386Z,1492154948.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:08.438Z,1492154948.438 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:29:08.822Z,1492154948.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:09.204Z,1492154949.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:09.586Z,1492154949.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:09.605Z,1492154949.605 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:29:09.605Z,1492154949.605 [BPC1] No Fault, FailCount= 1
2017-04-14T07:29:10.042Z,1492154950.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:10.436Z,1492154950.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:10.882Z,1492154950.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:11.210Z,1492154951.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:11.617Z,1492154951.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:12.017Z,1492154952.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:12.048Z,1492154952.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:29:12.408Z,1492154952.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:12.786Z,1492154952.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:12.844Z,1492154952.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:29:13.309Z,1492154953.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:13.610Z,1492154953.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:14.018Z,1492154954.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:14.421Z,1492154954.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:14.785Z,1492154954.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:15.281Z,1492154955.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:15.596Z,1492154955.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:16.046Z,1492154956.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:16.391Z,1492154956.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:16.852Z,1492154956.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:17.207Z,1492154957.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:17.591Z,1492154957.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:18.008Z,1492154958.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:18.435Z,1492154958.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:18.864Z,1492154958.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:19.221Z,1492154959.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:19.619Z,1492154959.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:20.007Z,1492154960.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:20.405Z,1492154960.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:20.817Z,1492154960.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:21.226Z,1492154961.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:21.594Z,1492154961.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:22.013Z,1492154962.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:22.432Z,1492154962.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:22.842Z,1492154962.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:23.208Z,1492154963.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:23.645Z,1492154963.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:24.015Z,1492154964.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:24.415Z,1492154964.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:24.891Z,1492154964.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:25.215Z,1492154965.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:25.612Z,1492154965.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:25.996Z,1492154965.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:26.393Z,1492154966.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:26.746Z,1492154966.746 [NAL9602](INFO): SBD MO Status=2, MOMSN=2128, MT Status=2, MTMSN=0
2017-04-14T07:29:26.746Z,1492154966.746 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T07:29:26.815Z,1492154966.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:27.254Z,1492154967.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:27.602Z,1492154967.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:27.998Z,1492154967.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:28.393Z,1492154968.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:28.802Z,1492154968.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:29.245Z,1492154969.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:29.597Z,1492154969.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:30.002Z,1492154970.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:30.399Z,1492154970.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:30.804Z,1492154970.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:31.204Z,1492154971.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:31.598Z,1492154971.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:31.598Z,1492154971.598 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T07:29:31.598Z,1492154971.598 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:29:31.604Z,1492154971.604 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:31.604Z,1492154971.604 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T07:29:31.604Z,1492154971.604 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:29:31.619Z,1492154971.619 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:29:31.643Z,1492154971.643 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:29:32.015Z,1492154972.015 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:29:32.015Z,1492154972.015 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T07:29:32.016Z,1492154972.016 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:29:32.016Z,1492154972.016 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T07:29:32.398Z,1492154972.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:29:32.398Z,1492154972.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:29:32.398Z,1492154972.398 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:29:32.403Z,1492154972.403 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:29:32.404Z,1492154972.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:29:32.404Z,1492154972.404 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:29:32.802Z,1492154972.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:33.195Z,1492154973.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:33.593Z,1492154973.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:34.023Z,1492154974.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:34.400Z,1492154974.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:34.833Z,1492154974.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:35.243Z,1492154975.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:35.642Z,1492154975.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:36.004Z,1492154976.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:36.421Z,1492154976.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:36.803Z,1492154976.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:37.230Z,1492154977.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:37.591Z,1492154977.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:38.026Z,1492154978.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:38.399Z,1492154978.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:38.913Z,1492154978.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:39.242Z,1492154979.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:39.596Z,1492154979.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:40.003Z,1492154980.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:40.408Z,1492154980.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:40.819Z,1492154980.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:41.218Z,1492154981.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:41.590Z,1492154981.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:41.998Z,1492154981.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:42.393Z,1492154982.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:42.790Z,1492154982.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:43.221Z,1492154983.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:43.594Z,1492154983.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:43.993Z,1492154983.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:44.402Z,1492154984.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:44.797Z,1492154984.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:45.192Z,1492154985.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:45.606Z,1492154985.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:45.994Z,1492154985.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:46.402Z,1492154986.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:46.410Z,1492154986.410 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:46.410Z,1492154986.410 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T07:29:46.410Z,1492154986.410 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:29:46.444Z,1492154986.444 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:29:46.807Z,1492154986.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:46.838Z,1492154986.838 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:29:46.838Z,1492154986.838 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T07:29:47.202Z,1492154987.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:47.208Z,1492154987.208 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:29:47.208Z,1492154987.208 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:29:47.209Z,1492154987.209 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:29:47.600Z,1492154987.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:47.949Z,1492154987.949 [NAL9602](INFO): SBD MO Status=0, MOMSN=2128, MT Status=0, MTMSN=0
2017-04-14T07:29:47.949Z,1492154987.949 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:29:48.006Z,1492154988.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:48.399Z,1492154988.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:48.822Z,1492154988.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:52.905Z,1492154992.905 [NAL9602](INFO): GPS fix at 20170414T073010: (36.802328, -121.787138)
2017-04-14T07:29:53.053Z,1492154993.053 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:29:53.053Z,1492154993.053 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:29:53.178Z,1492154993.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:53.178Z,1492154993.178 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:29:53.178Z,1492154993.178 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:29:53.193Z,1492154993.193 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:53.193Z,1492154993.193 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:29:53.193Z,1492154993.194 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:29:53.272Z,1492154993.272 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:29:53.272Z,1492154993.272 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:29:54.049Z,1492154994.049 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:29:54.050Z,1492154994.050 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:29:54.050Z,1492154994.050 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:29:54.050Z,1492154994.050 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:29:54.274Z,1492154994.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:29:54.274Z,1492154994.274 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:29:54.275Z,1492154994.275 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:29:54.305Z,1492154994.305 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:29:54.305Z,1492154994.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:29:54.305Z,1492154994.305 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:29:54.675Z,1492154994.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:55.148Z,1492154995.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:58.808Z,1492154998.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:58.896Z,1492154998.896 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20170414T032153/Courier0144.lzma
2017-04-14T07:29:58.971Z,1492154998.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:59.305Z,1492154999.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:29:59.666Z,1492154999.666 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0144.lzma.bak
2017-04-14T07:29:59.666Z,1492154999.666 [DataOverHttps](INFO): SBD MOMSN=4885425
2017-04-14T07:29:59.677Z,1492154999.677 [NAL9602](INFO): Powering down
2017-04-14T07:29:59.764Z,1492154999.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:00.176Z,1492155000.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:00.526Z,1492155000.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:03.984Z,1492155003.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:04.134Z,1492155004.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:04.491Z,1492155004.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:04.909Z,1492155004.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:05.300Z,1492155005.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:05.685Z,1492155005.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:09.413Z,1492155009.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:09.484Z,1492155009.484 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0145.lzma
2017-04-14T07:30:09.541Z,1492155009.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:09.946Z,1492155009.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:10.266Z,1492155010.266 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0145.lzma.bak
2017-04-14T07:30:10.266Z,1492155010.266 [DataOverHttps](INFO): SBD MOMSN=4885428
2017-04-14T07:30:10.349Z,1492155010.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:10.806Z,1492155010.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:10.815Z,1492155010.815 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:30:10.815Z,1492155010.815 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:30:10.816Z,1492155010.816 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:30:11.207Z,1492155011.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:14.766Z,1492155014.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:14.906Z,1492155014.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:15.280Z,1492155015.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:15.676Z,1492155015.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:16.081Z,1492155016.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:16.485Z,1492155016.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:16.890Z,1492155016.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:17.303Z,1492155017.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:17.687Z,1492155017.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:18.099Z,1492155018.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:18.498Z,1492155018.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:18.886Z,1492155018.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:19.299Z,1492155019.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:19.681Z,1492155019.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:20.085Z,1492155020.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:20.488Z,1492155020.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:20.878Z,1492155020.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:21.280Z,1492155021.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:21.725Z,1492155021.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:22.090Z,1492155022.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:22.482Z,1492155022.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:22.880Z,1492155022.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:23.334Z,1492155023.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:23.685Z,1492155023.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:24.124Z,1492155024.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:24.490Z,1492155024.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:24.902Z,1492155024.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:25.306Z,1492155025.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:25.690Z,1492155025.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:26.079Z,1492155026.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:26.490Z,1492155026.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:26.877Z,1492155026.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:27.282Z,1492155027.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:27.679Z,1492155027.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:28.076Z,1492155028.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:28.476Z,1492155028.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:28.882Z,1492155028.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:29.277Z,1492155029.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:29.682Z,1492155029.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:30.081Z,1492155030.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:30.476Z,1492155030.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:30.890Z,1492155030.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:31.282Z,1492155031.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:31.674Z,1492155031.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:32.076Z,1492155032.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:32.488Z,1492155032.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:32.885Z,1492155032.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:33.294Z,1492155033.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:33.689Z,1492155033.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:34.089Z,1492155034.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:34.488Z,1492155034.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:34.890Z,1492155034.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:35.288Z,1492155035.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:35.690Z,1492155035.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:35.896Z,1492155035.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:30:36.087Z,1492155036.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:36.489Z,1492155036.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:36.692Z,1492155036.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:30:36.886Z,1492155036.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:37.300Z,1492155037.300 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T07:30:37.301Z,1492155037.300 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:30:37.301Z,1492155037.301 [BPC1](ERROR): Data Fault
2017-04-14T07:30:37.324Z,1492155037.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:37.361Z,1492155037.361 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:30:37.668Z,1492155037.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:38.094Z,1492155038.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:38.473Z,1492155038.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:38.531Z,1492155038.532 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:30:38.532Z,1492155038.532 [BPC1] No Fault, FailCount= 1
2017-04-14T07:30:38.945Z,1492155038.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:39.299Z,1492155039.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:39.679Z,1492155039.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:40.077Z,1492155040.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:40.483Z,1492155040.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:40.890Z,1492155040.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:41.270Z,1492155041.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:41.668Z,1492155041.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:42.074Z,1492155042.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:42.478Z,1492155042.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:42.886Z,1492155042.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:43.279Z,1492155043.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:43.749Z,1492155043.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:44.092Z,1492155044.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:44.496Z,1492155044.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:44.877Z,1492155044.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:45.276Z,1492155045.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:45.673Z,1492155045.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:46.078Z,1492155046.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:46.486Z,1492155046.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:46.889Z,1492155046.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:47.286Z,1492155047.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:47.691Z,1492155047.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:48.089Z,1492155048.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:48.472Z,1492155048.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:48.877Z,1492155048.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:49.277Z,1492155049.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:49.676Z,1492155049.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:49.892Z,1492155049.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:30:50.076Z,1492155050.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:50.477Z,1492155050.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:50.688Z,1492155050.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:30:50.878Z,1492155050.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:51.294Z,1492155051.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:51.699Z,1492155051.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:52.080Z,1492155052.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:52.517Z,1492155052.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:52.888Z,1492155052.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:53.316Z,1492155053.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:53.713Z,1492155053.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:54.086Z,1492155054.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:54.482Z,1492155054.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:54.892Z,1492155054.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:55.275Z,1492155055.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:55.681Z,1492155055.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:56.075Z,1492155056.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:56.474Z,1492155056.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:56.886Z,1492155056.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:57.288Z,1492155057.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:57.669Z,1492155057.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:58.069Z,1492155058.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:58.527Z,1492155058.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:58.879Z,1492155058.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:59.281Z,1492155059.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:30:59.685Z,1492155059.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:00.082Z,1492155060.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:00.478Z,1492155060.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:00.884Z,1492155060.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:01.289Z,1492155061.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:01.686Z,1492155061.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:02.088Z,1492155062.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:02.510Z,1492155062.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:02.905Z,1492155062.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:03.283Z,1492155063.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:03.694Z,1492155063.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:04.074Z,1492155064.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:04.504Z,1492155064.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:04.890Z,1492155064.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:05.271Z,1492155065.271 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T07:31:05.271Z,1492155065.271 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:31:05.271Z,1492155065.271 [BPC1](ERROR): Data Fault
2017-04-14T07:31:05.280Z,1492155065.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:05.340Z,1492155065.339 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:31:05.677Z,1492155065.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:06.082Z,1492155066.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:06.480Z,1492155066.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:06.517Z,1492155066.517 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:31:06.517Z,1492155066.517 [BPC1] No Fault, FailCount= 1
2017-04-14T07:31:06.926Z,1492155066.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:07.302Z,1492155067.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:07.687Z,1492155067.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:08.070Z,1492155068.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:08.517Z,1492155068.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:08.894Z,1492155068.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:09.293Z,1492155069.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:09.670Z,1492155069.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:10.078Z,1492155070.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:10.478Z,1492155070.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:10.885Z,1492155070.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:11.329Z,1492155071.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:15.308Z,1492155075.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:15.425Z,1492155075.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:15.814Z,1492155075.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:16.270Z,1492155076.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:16.670Z,1492155076.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:17.020Z,1492155077.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:17.416Z,1492155077.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:17.797Z,1492155077.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:18.223Z,1492155078.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:18.631Z,1492155078.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:19.100Z,1492155079.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:19.502Z,1492155079.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:19.818Z,1492155079.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:20.253Z,1492155080.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:20.617Z,1492155080.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:21.112Z,1492155081.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:21.419Z,1492155081.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:21.842Z,1492155081.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:22.193Z,1492155082.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:22.598Z,1492155082.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:23.018Z,1492155083.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:23.414Z,1492155083.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:23.806Z,1492155083.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:24.186Z,1492155084.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:24.625Z,1492155084.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:25.011Z,1492155085.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:25.399Z,1492155085.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:25.792Z,1492155085.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:26.194Z,1492155086.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:26.640Z,1492155086.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:27.022Z,1492155087.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:27.401Z,1492155087.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:27.801Z,1492155087.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:28.199Z,1492155088.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:28.617Z,1492155088.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:29.005Z,1492155089.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:29.412Z,1492155089.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:29.810Z,1492155089.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:30.215Z,1492155090.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:30.691Z,1492155090.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:31.020Z,1492155091.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:31.394Z,1492155091.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:31.817Z,1492155091.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:32.197Z,1492155092.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:32.598Z,1492155092.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:33.078Z,1492155093.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:33.421Z,1492155093.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:33.842Z,1492155093.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:34.223Z,1492155094.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:34.601Z,1492155094.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:35.042Z,1492155095.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:35.414Z,1492155095.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:35.809Z,1492155095.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:36.230Z,1492155096.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:36.630Z,1492155096.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:37.014Z,1492155097.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:37.419Z,1492155097.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:37.819Z,1492155097.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:38.226Z,1492155098.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:38.600Z,1492155098.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:38.995Z,1492155098.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:39.397Z,1492155099.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:39.800Z,1492155099.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:40.202Z,1492155100.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:40.596Z,1492155100.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:40.989Z,1492155100.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:41.397Z,1492155101.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:41.796Z,1492155101.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:42.197Z,1492155102.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:42.606Z,1492155102.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:43.002Z,1492155103.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:43.398Z,1492155103.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:43.795Z,1492155103.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:44.194Z,1492155104.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:44.669Z,1492155104.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:45.009Z,1492155105.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:45.388Z,1492155105.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:45.798Z,1492155105.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:46.195Z,1492155106.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:46.598Z,1492155106.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:47.005Z,1492155107.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:47.411Z,1492155107.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:47.801Z,1492155107.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:48.193Z,1492155108.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:48.594Z,1492155108.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:49.089Z,1492155109.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:49.470Z,1492155109.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:49.834Z,1492155109.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:50.216Z,1492155110.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:50.614Z,1492155110.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:51.042Z,1492155111.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:51.398Z,1492155111.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:51.801Z,1492155111.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:52.202Z,1492155112.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:52.621Z,1492155112.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:53.026Z,1492155113.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:53.418Z,1492155113.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:53.814Z,1492155113.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:54.208Z,1492155114.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:54.660Z,1492155114.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:55.007Z,1492155115.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:55.400Z,1492155115.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:55.801Z,1492155115.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:56.201Z,1492155116.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:56.618Z,1492155116.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:56.994Z,1492155116.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:57.402Z,1492155117.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:57.814Z,1492155117.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:58.195Z,1492155118.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:58.638Z,1492155118.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:59.040Z,1492155119.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:59.406Z,1492155119.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:31:59.802Z,1492155119.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:00.208Z,1492155120.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:00.603Z,1492155120.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:01.020Z,1492155121.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:01.472Z,1492155121.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:01.874Z,1492155121.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:02.290Z,1492155122.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:02.623Z,1492155122.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:03.014Z,1492155123.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:03.475Z,1492155123.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:03.831Z,1492155123.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:04.233Z,1492155124.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:04.592Z,1492155124.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:05.032Z,1492155125.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:05.426Z,1492155125.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:05.835Z,1492155125.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:06.220Z,1492155126.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:06.615Z,1492155126.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:07.002Z,1492155127.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:07.406Z,1492155127.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:07.789Z,1492155127.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:08.204Z,1492155128.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:08.611Z,1492155128.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:09.008Z,1492155129.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:09.403Z,1492155129.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:09.823Z,1492155129.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:10.214Z,1492155130.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:10.609Z,1492155130.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:11.026Z,1492155131.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:11.399Z,1492155131.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:12.965Z,1492155132.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:32:13.760Z,1492155133.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:32:15.358Z,1492155135.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:15.487Z,1492155135.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:15.894Z,1492155135.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:16.296Z,1492155136.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:16.694Z,1492155136.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:17.096Z,1492155137.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:17.526Z,1492155137.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:17.871Z,1492155137.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:18.282Z,1492155138.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:18.714Z,1492155138.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:19.076Z,1492155139.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:19.510Z,1492155139.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:19.915Z,1492155139.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:20.272Z,1492155140.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:20.678Z,1492155140.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:21.079Z,1492155141.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:21.478Z,1492155141.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:21.874Z,1492155141.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:22.278Z,1492155142.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:22.684Z,1492155142.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:23.093Z,1492155143.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:23.505Z,1492155143.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:23.900Z,1492155143.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:24.290Z,1492155144.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:24.679Z,1492155144.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:25.105Z,1492155145.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:25.492Z,1492155145.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:25.888Z,1492155145.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:26.299Z,1492155146.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:26.670Z,1492155146.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:27.070Z,1492155147.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:27.481Z,1492155147.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:27.728Z,1492155147.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:32:27.869Z,1492155147.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:28.273Z,1492155148.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:28.317Z,1492155148.317 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:32:28.524Z,1492155148.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:32:28.682Z,1492155148.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:29.078Z,1492155149.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:29.474Z,1492155149.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:29.880Z,1492155149.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:30.286Z,1492155150.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:30.680Z,1492155150.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:31.085Z,1492155151.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:31.486Z,1492155151.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:31.942Z,1492155151.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:32.274Z,1492155152.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:32.683Z,1492155152.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:33.122Z,1492155153.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:33.478Z,1492155153.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:33.902Z,1492155153.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:34.322Z,1492155154.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:34.686Z,1492155154.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:35.090Z,1492155155.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:35.473Z,1492155155.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:35.872Z,1492155155.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:36.275Z,1492155156.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:36.678Z,1492155156.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:37.076Z,1492155157.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:37.482Z,1492155157.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:37.871Z,1492155157.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:38.272Z,1492155158.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:38.682Z,1492155158.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:39.092Z,1492155159.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:39.484Z,1492155159.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:39.894Z,1492155159.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:40.258Z,1492155160.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:40.683Z,1492155160.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:41.111Z,1492155161.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:41.504Z,1492155161.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:41.942Z,1492155161.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:42.326Z,1492155162.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:42.712Z,1492155162.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:43.087Z,1492155163.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:43.482Z,1492155163.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:43.888Z,1492155163.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:44.281Z,1492155164.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:44.730Z,1492155164.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:45.080Z,1492155165.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:45.478Z,1492155165.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:45.888Z,1492155165.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:46.489Z,1492155166.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:46.696Z,1492155166.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:47.114Z,1492155167.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:47.492Z,1492155167.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:47.499Z,1492155167.499 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:47.499Z,1492155167.499 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:32:47.503Z,1492155167.503 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:32:47.529Z,1492155167.529 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:32:47.926Z,1492155167.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:47.993Z,1492155167.993 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:32:47.993Z,1492155167.993 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:32:48.275Z,1492155168.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:48.282Z,1492155168.282 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:32:48.282Z,1492155168.282 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:32:48.283Z,1492155168.283 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:32:48.698Z,1492155168.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:49.094Z,1492155169.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:49.533Z,1492155169.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:49.887Z,1492155169.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:50.295Z,1492155170.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:50.775Z,1492155170.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:51.134Z,1492155171.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:51.488Z,1492155171.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:51.902Z,1492155171.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:52.273Z,1492155172.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:52.702Z,1492155172.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:53.078Z,1492155173.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:53.495Z,1492155173.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:53.880Z,1492155173.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:54.281Z,1492155174.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:54.281Z,1492155174.281 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:32:54.281Z,1492155174.281 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:32:54.303Z,1492155174.303 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:32:54.695Z,1492155174.695 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:54.696Z,1492155174.695 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:32:54.696Z,1492155174.696 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:32:54.711Z,1492155174.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:32:54.711Z,1492155174.711 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:32:54.712Z,1492155174.712 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:32:55.099Z,1492155175.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:32:55.099Z,1492155175.099 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:32:55.100Z,1492155175.100 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:32:55.167Z,1492155175.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:32:55.167Z,1492155175.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:32:55.490Z,1492155175.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:55.502Z,1492155175.502 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:32:55.502Z,1492155175.503 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:32:55.503Z,1492155175.503 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:32:55.888Z,1492155175.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:56.272Z,1492155176.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:56.701Z,1492155176.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:57.078Z,1492155177.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:57.476Z,1492155177.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:57.900Z,1492155177.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:58.294Z,1492155178.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:58.758Z,1492155178.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:59.117Z,1492155179.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:32:59.525Z,1492155179.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:00.003Z,1492155180.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:00.434Z,1492155180.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:00.738Z,1492155180.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:01.101Z,1492155181.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:01.549Z,1492155181.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:01.885Z,1492155181.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:02.295Z,1492155182.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:02.711Z,1492155182.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:03.073Z,1492155183.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:03.476Z,1492155183.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:03.880Z,1492155183.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:04.274Z,1492155184.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:04.690Z,1492155184.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:05.081Z,1492155185.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:05.481Z,1492155185.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:05.880Z,1492155185.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:06.283Z,1492155186.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:06.693Z,1492155186.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:07.090Z,1492155187.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:07.467Z,1492155187.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:07.895Z,1492155187.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:08.273Z,1492155188.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:08.678Z,1492155188.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:09.079Z,1492155189.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:09.476Z,1492155189.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:09.935Z,1492155189.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:10.284Z,1492155190.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:10.688Z,1492155190.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:11.084Z,1492155191.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:11.488Z,1492155191.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:16.226Z,1492155196.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:16.709Z,1492155196.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:16.924Z,1492155196.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:17.310Z,1492155197.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:17.735Z,1492155197.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:18.121Z,1492155198.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:18.522Z,1492155198.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:18.930Z,1492155198.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:19.287Z,1492155199.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:19.711Z,1492155199.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:20.091Z,1492155200.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:20.494Z,1492155200.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:20.904Z,1492155200.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:21.294Z,1492155201.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:21.699Z,1492155201.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:22.091Z,1492155202.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:22.521Z,1492155202.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:22.906Z,1492155202.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:23.276Z,1492155203.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:23.708Z,1492155203.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:24.108Z,1492155204.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:24.482Z,1492155204.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:24.886Z,1492155204.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:25.313Z,1492155205.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:25.690Z,1492155205.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:26.120Z,1492155206.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:26.493Z,1492155206.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:26.937Z,1492155206.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:27.296Z,1492155207.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:27.702Z,1492155207.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:28.102Z,1492155208.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:28.501Z,1492155208.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:28.895Z,1492155208.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:29.298Z,1492155209.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:29.707Z,1492155209.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:30.101Z,1492155210.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:30.522Z,1492155210.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:30.933Z,1492155210.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:31.286Z,1492155211.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:31.717Z,1492155211.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:32.090Z,1492155212.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:32.542Z,1492155212.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:32.922Z,1492155212.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:33.298Z,1492155213.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:33.724Z,1492155213.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:34.098Z,1492155214.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:34.498Z,1492155214.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:34.893Z,1492155214.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:35.288Z,1492155215.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:35.702Z,1492155215.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:36.089Z,1492155216.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:36.512Z,1492155216.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:36.832Z,1492155216.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:33:36.897Z,1492155216.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:37.291Z,1492155217.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:37.628Z,1492155217.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:33:37.699Z,1492155217.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:38.090Z,1492155218.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:38.502Z,1492155218.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:38.895Z,1492155218.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:39.285Z,1492155219.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:39.687Z,1492155219.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:40.088Z,1492155220.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:40.491Z,1492155220.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:40.902Z,1492155220.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:41.294Z,1492155221.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:41.698Z,1492155221.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:42.100Z,1492155222.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:42.502Z,1492155222.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:42.906Z,1492155222.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:43.338Z,1492155223.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:43.752Z,1492155223.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:44.204Z,1492155224.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:44.576Z,1492155224.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:45.105Z,1492155225.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:45.343Z,1492155225.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:45.703Z,1492155225.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:46.156Z,1492155226.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:46.522Z,1492155226.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:46.925Z,1492155226.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:47.326Z,1492155227.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:47.694Z,1492155227.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:48.102Z,1492155228.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:48.500Z,1492155228.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:48.898Z,1492155228.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:49.298Z,1492155229.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:49.696Z,1492155229.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:50.089Z,1492155230.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:50.494Z,1492155230.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:50.898Z,1492155230.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:51.296Z,1492155231.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:51.600Z,1492155231.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:33:51.697Z,1492155231.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:52.094Z,1492155232.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:52.396Z,1492155232.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:33:52.498Z,1492155232.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:52.896Z,1492155232.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:53.305Z,1492155233.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:53.706Z,1492155233.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:54.100Z,1492155234.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:54.501Z,1492155234.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:54.900Z,1492155234.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:55.302Z,1492155235.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:55.698Z,1492155235.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:56.104Z,1492155236.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:56.510Z,1492155236.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:56.903Z,1492155236.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:57.303Z,1492155237.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:57.702Z,1492155237.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:58.102Z,1492155238.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:58.494Z,1492155238.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:58.885Z,1492155238.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:59.319Z,1492155239.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:33:59.741Z,1492155239.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:00.129Z,1492155240.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:00.492Z,1492155240.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:00.933Z,1492155240.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:01.330Z,1492155241.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:01.714Z,1492155241.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:02.138Z,1492155242.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:02.501Z,1492155242.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:02.898Z,1492155242.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:03.295Z,1492155243.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:03.703Z,1492155243.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:04.098Z,1492155244.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:04.497Z,1492155244.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:04.898Z,1492155244.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:05.299Z,1492155245.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:05.688Z,1492155245.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:06.100Z,1492155246.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:06.501Z,1492155246.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:06.899Z,1492155246.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:07.307Z,1492155247.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:07.687Z,1492155247.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:08.111Z,1492155248.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:08.502Z,1492155248.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:08.888Z,1492155248.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:09.298Z,1492155249.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:09.693Z,1492155249.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:10.099Z,1492155250.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:10.532Z,1492155250.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:10.897Z,1492155250.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:11.296Z,1492155251.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:11.693Z,1492155251.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:15.503Z,1492155255.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:15.639Z,1492155255.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:16.002Z,1492155256.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:16.501Z,1492155256.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:16.798Z,1492155256.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:17.252Z,1492155257.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:17.623Z,1492155257.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:18.029Z,1492155258.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:18.484Z,1492155258.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:18.795Z,1492155258.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:19.220Z,1492155259.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:19.642Z,1492155259.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:20.099Z,1492155260.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:20.422Z,1492155260.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:20.933Z,1492155260.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:21.307Z,1492155261.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:21.678Z,1492155261.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:22.077Z,1492155262.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:22.451Z,1492155262.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:22.891Z,1492155262.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:23.270Z,1492155263.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:23.644Z,1492155263.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:24.047Z,1492155264.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:24.414Z,1492155264.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:24.814Z,1492155264.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:25.209Z,1492155265.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:25.606Z,1492155265.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:26.031Z,1492155266.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:26.403Z,1492155266.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:26.857Z,1492155266.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:27.208Z,1492155267.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:27.613Z,1492155267.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:28.020Z,1492155268.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:28.431Z,1492155268.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:28.822Z,1492155268.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:29.223Z,1492155269.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:29.655Z,1492155269.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:30.070Z,1492155270.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:30.424Z,1492155270.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:30.830Z,1492155270.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:31.197Z,1492155271.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:31.638Z,1492155271.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:32.030Z,1492155272.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:32.413Z,1492155272.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:32.804Z,1492155272.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:33.204Z,1492155273.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:33.599Z,1492155273.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:34.002Z,1492155274.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:34.401Z,1492155274.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:34.804Z,1492155274.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:35.214Z,1492155275.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:35.598Z,1492155275.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:36.009Z,1492155276.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:36.407Z,1492155276.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:36.806Z,1492155276.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:37.208Z,1492155277.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:37.609Z,1492155277.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:38.009Z,1492155278.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:38.430Z,1492155278.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:38.818Z,1492155278.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:39.197Z,1492155279.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:39.630Z,1492155279.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:40.004Z,1492155280.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:40.453Z,1492155280.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:40.806Z,1492155280.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:41.207Z,1492155281.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:41.625Z,1492155281.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:42.001Z,1492155282.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:42.399Z,1492155282.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:42.810Z,1492155282.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:43.209Z,1492155283.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:43.601Z,1492155283.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:44.014Z,1492155284.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:44.493Z,1492155284.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:44.818Z,1492155284.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:45.228Z,1492155285.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:45.595Z,1492155285.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:46.037Z,1492155286.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:46.454Z,1492155286.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:46.836Z,1492155286.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:47.213Z,1492155287.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:47.604Z,1492155287.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:48.026Z,1492155288.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:48.424Z,1492155288.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:48.791Z,1492155288.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:49.220Z,1492155289.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:49.592Z,1492155289.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:49.994Z,1492155289.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:50.403Z,1492155290.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:50.830Z,1492155290.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:51.211Z,1492155291.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:51.648Z,1492155291.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:52.017Z,1492155292.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:52.401Z,1492155292.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:52.825Z,1492155292.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:53.204Z,1492155293.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:53.606Z,1492155293.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:54.009Z,1492155294.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:54.407Z,1492155294.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:54.808Z,1492155294.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:55.246Z,1492155295.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:55.676Z,1492155295.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:56.038Z,1492155296.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:56.485Z,1492155296.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:56.807Z,1492155296.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:57.198Z,1492155297.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:57.613Z,1492155297.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:58.056Z,1492155298.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:58.732Z,1492155298.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:58.987Z,1492155298.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:59.363Z,1492155299.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:34:59.714Z,1492155299.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:00.159Z,1492155300.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:00.538Z,1492155300.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:00.938Z,1492155300.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:01.314Z,1492155301.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:01.742Z,1492155301.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:02.094Z,1492155302.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:02.493Z,1492155302.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:02.900Z,1492155302.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:03.309Z,1492155303.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:03.706Z,1492155303.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:04.100Z,1492155304.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:04.503Z,1492155304.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:04.922Z,1492155304.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:05.336Z,1492155305.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:05.698Z,1492155305.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:06.098Z,1492155306.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:06.529Z,1492155306.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:06.925Z,1492155306.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:07.326Z,1492155307.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:07.689Z,1492155307.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:08.178Z,1492155308.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:08.499Z,1492155308.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:08.898Z,1492155308.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:09.303Z,1492155309.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:09.699Z,1492155309.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:10.097Z,1492155310.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:10.539Z,1492155310.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:10.924Z,1492155310.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:11.290Z,1492155311.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:11.327Z,1492155311.327 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:35:11.327Z,1492155311.327 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:35:11.327Z,1492155311.327 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:35:11.327Z,1492155311.328 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:35:11.694Z,1492155311.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:11.712Z,1492155311.712 [Default:CheckIn:D] Stopped
2017-04-14T07:35:11.712Z,1492155311.712 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:35:15.484Z,1492155315.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:35:16.069Z,1492155316.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:16.087Z,1492155316.087 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 249.106559 min 
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn:E] Stopped
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn] Stopped
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn](INFO): Running loop #36
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn] Running Loop=36
2017-04-14T07:35:16.088Z,1492155316.088 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:35:16.089Z,1492155316.089 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:35:16.213Z,1492155316.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:16.280Z,1492155316.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:35:16.536Z,1492155316.536 [NAL9602](INFO): Powering up
2017-04-14T07:35:16.717Z,1492155316.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:16.983Z,1492155316.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:17.391Z,1492155317.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:17.806Z,1492155317.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:18.160Z,1492155318.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:18.669Z,1492155318.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:18.980Z,1492155318.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:19.457Z,1492155319.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:19.824Z,1492155319.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:20.368Z,1492155320.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:20.626Z,1492155320.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:21.135Z,1492155321.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:21.426Z,1492155321.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:21.776Z,1492155321.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:22.250Z,1492155322.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:22.637Z,1492155322.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:22.966Z,1492155322.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:23.377Z,1492155323.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:23.850Z,1492155323.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:24.234Z,1492155324.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:24.576Z,1492155324.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:24.981Z,1492155324.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:25.384Z,1492155325.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:25.760Z,1492155325.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:26.266Z,1492155326.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:26.574Z,1492155326.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:27.016Z,1492155327.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:27.433Z,1492155327.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:27.733Z,1492155327.733 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:35:27.796Z,1492155327.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:28.300Z,1492155328.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:28.661Z,1492155328.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:29.029Z,1492155329.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:29.409Z,1492155329.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:29.480Z,1492155329.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:35:29.865Z,1492155329.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:30.240Z,1492155330.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:30.276Z,1492155330.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:35:30.672Z,1492155330.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:31.032Z,1492155331.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:31.440Z,1492155331.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:31.796Z,1492155331.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:32.214Z,1492155332.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:32.692Z,1492155332.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:32.988Z,1492155332.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:33.390Z,1492155333.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:33.788Z,1492155333.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:34.231Z,1492155334.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:34.610Z,1492155334.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:34.994Z,1492155334.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:35.442Z,1492155335.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:35.775Z,1492155335.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:36.317Z,1492155336.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:36.599Z,1492155336.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:36.000Z,1492155337.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:37.405Z,1492155337.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:37.769Z,1492155337.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:38.214Z,1492155338.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:38.629Z,1492155338.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:38.997Z,1492155338.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:39.363Z,1492155339.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:39.770Z,1492155339.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:40.242Z,1492155340.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:40.601Z,1492155340.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:40.998Z,1492155340.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:41.381Z,1492155341.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:41.777Z,1492155341.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:42.257Z,1492155342.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:42.594Z,1492155342.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:42.978Z,1492155342.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:43.403Z,1492155343.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:43.811Z,1492155343.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:44.198Z,1492155344.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:44.710Z,1492155344.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:45.007Z,1492155345.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:45.380Z,1492155345.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:45.798Z,1492155345.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:46.179Z,1492155346.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:46.650Z,1492155346.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:47.022Z,1492155347.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:47.435Z,1492155347.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:47.856Z,1492155347.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:48.254Z,1492155348.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:48.296Z,1492155348.296 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:48.296Z,1492155348.296 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:35:48.296Z,1492155348.296 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:35:48.343Z,1492155348.343 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:35:48.610Z,1492155348.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:48.678Z,1492155348.678 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:35:48.678Z,1492155348.678 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:35:48.977Z,1492155348.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:48.993Z,1492155348.993 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:35:48.993Z,1492155348.993 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:35:48.994Z,1492155348.994 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:35:49.384Z,1492155349.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:49.761Z,1492155349.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:50.227Z,1492155350.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:50.586Z,1492155350.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:50.970Z,1492155350.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:51.389Z,1492155351.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:51.800Z,1492155351.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:52.220Z,1492155352.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:52.563Z,1492155352.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:52.987Z,1492155352.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:53.393Z,1492155353.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:53.768Z,1492155353.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:54.194Z,1492155354.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:54.583Z,1492155354.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:54.992Z,1492155354.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:55.401Z,1492155355.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:55.401Z,1492155355.401 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T07:35:55.401Z,1492155355.401 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:35:55.458Z,1492155355.458 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:35:55.850Z,1492155355.850 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:55.850Z,1492155355.850 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T07:35:55.850Z,1492155355.850 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:35:55.905Z,1492155355.905 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:35:55.905Z,1492155355.905 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T07:35:55.906Z,1492155355.906 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:35:56.304Z,1492155356.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:35:56.305Z,1492155356.305 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:35:56.307Z,1492155356.307 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:35:56.402Z,1492155356.402 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:35:56.402Z,1492155356.402 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T07:35:56.639Z,1492155356.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:56.657Z,1492155356.657 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:35:56.657Z,1492155356.657 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:35:56.658Z,1492155356.658 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:35:56.934Z,1492155356.934 [NAL9602](INFO): SBD MO Status=0, MOMSN=2129, MT Status=0, MTMSN=0
2017-04-14T07:35:56.934Z,1492155356.934 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:35:57.009Z,1492155357.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:57.363Z,1492155357.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:57.794Z,1492155357.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:58.131Z,1492155358.131 [NAL9602](INFO): GPS fix at 20170414T073620: (36.802337, -121.787136)
2017-04-14T07:35:58.225Z,1492155358.225 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:35:58.225Z,1492155358.225 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:35:58.641Z,1492155358.641 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:58.642Z,1492155358.642 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-04-14T07:35:58.642Z,1492155358.642 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:35:58.661Z,1492155358.661 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:35:58.662Z,1492155358.662 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-04-14T07:35:58.662Z,1492155358.662 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:35:58.686Z,1492155358.686 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:35:58.686Z,1492155358.686 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:35:59.159Z,1492155359.159 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:35:59.159Z,1492155359.159 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-04-14T07:35:59.164Z,1492155359.164 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:35:59.164Z,1492155359.164 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-04-14T07:35:59.469Z,1492155359.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:35:59.470Z,1492155359.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:35:59.470Z,1492155359.470 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:35:59.486Z,1492155359.486 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:35:59.486Z,1492155359.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:35:59.486Z,1492155359.486 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:36:03.818Z,1492155363.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:03.896Z,1492155363.896 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0148.lzma
2017-04-14T07:36:03.948Z,1492155363.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:04.338Z,1492155364.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:04.655Z,1492155364.655 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0148.lzma.bak
2017-04-14T07:36:04.656Z,1492155364.656 [DataOverHttps](INFO): SBD MOMSN=4885435
2017-04-14T07:36:04.764Z,1492155364.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:05.166Z,1492155365.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:05.550Z,1492155365.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:10.352Z,1492155370.352 [NAL9602](INFO): Powering down
2017-04-14T07:36:10.425Z,1492155370.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:10.584Z,1492155370.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:10.951Z,1492155370.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:11.395Z,1492155371.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:11.746Z,1492155371.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:12.160Z,1492155372.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:16.259Z,1492155376.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:16.334Z,1492155376.334 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0149.lzma
2017-04-14T07:36:16.406Z,1492155376.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:16.794Z,1492155376.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:17.118Z,1492155377.118 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0149.lzma.bak
2017-04-14T07:36:17.118Z,1492155377.118 [DataOverHttps](INFO): SBD MOMSN=4885438
2017-04-14T07:36:17.196Z,1492155377.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:17.590Z,1492155377.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:17.602Z,1492155377.602 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:36:17.602Z,1492155377.602 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:36:17.602Z,1492155377.602 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:36:17.960Z,1492155377.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:22.668Z,1492155382.668 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:36:22.668Z,1492155382.668 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:36:22.668Z,1492155382.668 [BPC1](ERROR): Communications Fault
2017-04-14T07:36:22.689Z,1492155382.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:22.815Z,1492155382.815 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:36:23.024Z,1492155383.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:23.328Z,1492155383.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:23.691Z,1492155383.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:23.733Z,1492155383.733 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:36:23.733Z,1492155383.733 [BPC1] No Fault, FailCount= 1
2017-04-14T07:36:24.213Z,1492155384.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:24.492Z,1492155384.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:24.912Z,1492155384.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:25.285Z,1492155385.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:25.724Z,1492155385.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:26.088Z,1492155386.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:26.579Z,1492155386.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:26.900Z,1492155386.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:27.298Z,1492155387.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:27.755Z,1492155387.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:28.222Z,1492155388.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:28.594Z,1492155388.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:28.927Z,1492155388.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:29.446Z,1492155389.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:29.694Z,1492155389.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:30.152Z,1492155390.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:30.476Z,1492155390.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:30.883Z,1492155390.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:31.279Z,1492155391.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:31.683Z,1492155391.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:32.150Z,1492155392.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:32.501Z,1492155392.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:32.940Z,1492155392.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:33.270Z,1492155393.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:33.670Z,1492155393.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:34.197Z,1492155394.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:34.482Z,1492155394.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:34.878Z,1492155394.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:35.275Z,1492155395.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:35.690Z,1492155395.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:36.140Z,1492155396.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:36.575Z,1492155396.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:36.915Z,1492155396.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:37.310Z,1492155397.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:37.727Z,1492155397.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:38.194Z,1492155398.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:38.538Z,1492155398.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:38.952Z,1492155398.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:39.270Z,1492155399.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:39.714Z,1492155399.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:40.134Z,1492155400.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:40.575Z,1492155400.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:40.890Z,1492155400.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:41.285Z,1492155401.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:41.680Z,1492155401.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:42.074Z,1492155402.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:42.560Z,1492155402.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:42.925Z,1492155402.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:43.328Z,1492155403.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:43.710Z,1492155403.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:44.216Z,1492155404.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:44.540Z,1492155404.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:44.927Z,1492155404.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:45.343Z,1492155405.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:45.708Z,1492155405.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:46.103Z,1492155406.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:46.496Z,1492155406.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:46.892Z,1492155406.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:47.325Z,1492155407.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:47.710Z,1492155407.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:48.128Z,1492155408.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:48.528Z,1492155408.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:48.923Z,1492155408.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:49.334Z,1492155409.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:49.719Z,1492155409.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:50.120Z,1492155410.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:50.529Z,1492155410.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:50.989Z,1492155410.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:51.284Z,1492155411.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:51.734Z,1492155411.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:52.174Z,1492155412.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:52.526Z,1492155412.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:52.909Z,1492155412.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:53.308Z,1492155413.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:53.344Z,1492155413.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:36:53.714Z,1492155413.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:54.094Z,1492155414.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:54.140Z,1492155414.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:36:54.544Z,1492155414.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:54.882Z,1492155414.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:55.282Z,1492155415.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:55.680Z,1492155415.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:56.091Z,1492155416.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:56.595Z,1492155416.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:56.904Z,1492155416.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:57.302Z,1492155417.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:57.754Z,1492155417.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:58.197Z,1492155418.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:58.543Z,1492155418.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:58.911Z,1492155418.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:59.285Z,1492155419.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:36:59.734Z,1492155419.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:00.116Z,1492155420.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:00.489Z,1492155420.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:00.912Z,1492155420.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:01.305Z,1492155421.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:01.697Z,1492155421.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:02.109Z,1492155422.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:02.515Z,1492155422.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:02.879Z,1492155422.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:03.324Z,1492155423.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:03.719Z,1492155423.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:04.155Z,1492155424.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:04.521Z,1492155424.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:04.893Z,1492155424.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:05.340Z,1492155425.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:05.728Z,1492155425.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:06.162Z,1492155426.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:06.506Z,1492155426.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:06.612Z,1492155426.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:37:06.894Z,1492155426.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:07.312Z,1492155427.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:07.408Z,1492155427.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:37:07.738Z,1492155427.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:08.108Z,1492155428.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:08.526Z,1492155428.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:08.898Z,1492155428.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:09.299Z,1492155429.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:09.714Z,1492155429.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:10.108Z,1492155430.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:10.525Z,1492155430.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:10.886Z,1492155430.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:11.282Z,1492155431.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:11.766Z,1492155431.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:12.130Z,1492155432.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:12.543Z,1492155432.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:12.869Z,1492155432.869 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T07:37:12.938Z,1492155432.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:13.323Z,1492155433.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:13.742Z,1492155433.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:14.143Z,1492155434.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:14.515Z,1492155434.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:14.890Z,1492155434.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:15.294Z,1492155435.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:15.700Z,1492155435.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:16.126Z,1492155436.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:16.491Z,1492155436.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:16.894Z,1492155436.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:17.294Z,1492155437.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:17.705Z,1492155437.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:18.169Z,1492155438.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:22.275Z,1492155442.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:22.799Z,1492155442.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:23.201Z,1492155443.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:23.622Z,1492155443.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:24.065Z,1492155444.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:24.437Z,1492155444.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:24.764Z,1492155444.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:25.129Z,1492155445.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:25.477Z,1492155445.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:25.865Z,1492155445.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:26.364Z,1492155446.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:26.750Z,1492155446.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:27.085Z,1492155447.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:27.600Z,1492155447.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:28.073Z,1492155448.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:28.367Z,1492155448.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:28.732Z,1492155448.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:29.124Z,1492155449.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:29.537Z,1492155449.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:30.282Z,1492155450.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:30.916Z,1492155450.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:31.234Z,1492155451.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:31.654Z,1492155451.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:32.314Z,1492155452.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:32.929Z,1492155452.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:33.336Z,1492155453.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:33.688Z,1492155453.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:34.114Z,1492155454.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:34.634Z,1492155454.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:34.997Z,1492155454.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:35.352Z,1492155455.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:35.819Z,1492155455.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:36.113Z,1492155456.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:36.530Z,1492155456.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:36.892Z,1492155456.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:37.326Z,1492155457.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:37.681Z,1492155457.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:38.071Z,1492155458.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:38.515Z,1492155458.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:38.872Z,1492155458.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:39.267Z,1492155459.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:39.672Z,1492155459.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:40.124Z,1492155460.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:40.485Z,1492155460.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:40.881Z,1492155460.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:41.262Z,1492155461.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:41.657Z,1492155461.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:42.062Z,1492155462.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:42.457Z,1492155462.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:42.866Z,1492155462.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:43.267Z,1492155463.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:43.667Z,1492155463.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:44.120Z,1492155464.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:44.470Z,1492155464.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:44.857Z,1492155464.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:45.259Z,1492155465.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:45.668Z,1492155465.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:46.082Z,1492155466.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:46.496Z,1492155466.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:46.852Z,1492155466.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:47.268Z,1492155467.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:47.760Z,1492155467.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:48.167Z,1492155468.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:48.505Z,1492155468.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:48.857Z,1492155468.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:49.294Z,1492155469.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:49.754Z,1492155469.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:50.058Z,1492155470.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:50.461Z,1492155470.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:50.861Z,1492155470.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:51.313Z,1492155471.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:51.655Z,1492155471.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:52.069Z,1492155472.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:52.481Z,1492155472.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:52.919Z,1492155472.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:53.269Z,1492155473.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:53.688Z,1492155473.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:54.159Z,1492155474.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:54.517Z,1492155474.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:54.891Z,1492155474.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:55.285Z,1492155475.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:55.656Z,1492155475.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:56.118Z,1492155476.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:56.469Z,1492155476.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:56.936Z,1492155476.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:57.276Z,1492155477.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:57.678Z,1492155477.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:58.076Z,1492155478.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:58.461Z,1492155478.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:58.901Z,1492155478.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:59.311Z,1492155479.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:37:59.665Z,1492155479.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:00.344Z,1492155480.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:00.667Z,1492155480.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:01.090Z,1492155481.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:01.635Z,1492155481.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:02.147Z,1492155482.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:02.544Z,1492155482.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:02.970Z,1492155482.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:03.306Z,1492155483.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:03.743Z,1492155483.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:04.152Z,1492155484.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:04.525Z,1492155484.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:04.924Z,1492155484.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:04.936Z,1492155484.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:05.434Z,1492155485.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:05.667Z,1492155485.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:05.720Z,1492155485.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:06.186Z,1492155486.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:06.618Z,1492155486.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:06.971Z,1492155486.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:07.387Z,1492155487.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:07.771Z,1492155487.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:08.215Z,1492155488.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:08.563Z,1492155488.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:08.986Z,1492155488.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:09.361Z,1492155489.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:09.760Z,1492155489.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:10.154Z,1492155490.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:10.609Z,1492155490.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:10.964Z,1492155490.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:11.370Z,1492155491.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:11.768Z,1492155491.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:12.173Z,1492155492.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:12.550Z,1492155492.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:12.948Z,1492155492.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:13.355Z,1492155493.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:13.902Z,1492155493.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:14.163Z,1492155494.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:14.575Z,1492155494.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:14.965Z,1492155494.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:15.382Z,1492155495.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:15.764Z,1492155495.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:16.144Z,1492155496.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:16.542Z,1492155496.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:16.989Z,1492155496.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:17.409Z,1492155497.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:17.749Z,1492155497.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:18.397Z,1492155498.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:24.766Z,1492155504.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:24.921Z,1492155504.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:25.306Z,1492155505.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:25.734Z,1492155505.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:26.115Z,1492155506.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:26.443Z,1492155506.443 [BPC1](ERROR): Failed to parse message.
2017-04-14T07:38:26.443Z,1492155506.443 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T07:38:26.444Z,1492155506.444 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:38:26.444Z,1492155506.444 [BPC1](ERROR): Data Fault
2017-04-14T07:38:26.452Z,1492155506.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:26.507Z,1492155506.507 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:38:26.854Z,1492155506.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:27.256Z,1492155507.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:27.693Z,1492155507.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:27.760Z,1492155507.760 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:38:27.760Z,1492155507.760 [BPC1] No Fault, FailCount= 1
2017-04-14T07:38:28.118Z,1492155508.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:28.492Z,1492155508.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:28.854Z,1492155508.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:29.250Z,1492155509.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:29.652Z,1492155509.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:30.058Z,1492155510.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:30.450Z,1492155510.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:30.859Z,1492155510.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:31.252Z,1492155511.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:31.263Z,1492155511.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:31.634Z,1492155511.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:32.048Z,1492155512.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:32.064Z,1492155512.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:32.439Z,1492155512.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:32.840Z,1492155512.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:33.273Z,1492155513.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:33.681Z,1492155513.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:34.045Z,1492155514.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:34.482Z,1492155514.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:34.868Z,1492155514.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:35.262Z,1492155515.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:35.644Z,1492155515.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:36.076Z,1492155516.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:36.447Z,1492155516.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:36.850Z,1492155516.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:37.245Z,1492155517.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:37.647Z,1492155517.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:38.096Z,1492155518.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:38.454Z,1492155518.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:38.851Z,1492155518.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:39.326Z,1492155519.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:39.638Z,1492155519.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:40.075Z,1492155520.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:40.472Z,1492155520.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:40.895Z,1492155520.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:41.282Z,1492155521.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:41.642Z,1492155521.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:42.084Z,1492155522.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:42.447Z,1492155522.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:42.854Z,1492155522.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:43.248Z,1492155523.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:43.651Z,1492155523.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:44.066Z,1492155524.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:44.452Z,1492155524.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:44.854Z,1492155524.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:45.176Z,1492155525.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:45.255Z,1492155525.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:45.670Z,1492155525.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:45.972Z,1492155525.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:38:46.052Z,1492155526.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:46.472Z,1492155526.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:46.858Z,1492155526.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:47.271Z,1492155527.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:47.659Z,1492155527.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:48.110Z,1492155528.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:48.466Z,1492155528.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:48.868Z,1492155528.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:49.245Z,1492155529.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:49.278Z,1492155529.278 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:49.278Z,1492155529.278 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:38:49.278Z,1492155529.278 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:38:49.300Z,1492155529.300 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:38:49.680Z,1492155529.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:49.728Z,1492155529.727 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:38:49.728Z,1492155529.728 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:38:50.045Z,1492155530.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:50.051Z,1492155530.051 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:38:50.052Z,1492155530.052 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:38:50.052Z,1492155530.052 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:38:50.459Z,1492155530.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:50.863Z,1492155530.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:51.257Z,1492155531.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:51.648Z,1492155531.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:52.072Z,1492155532.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:52.535Z,1492155532.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:52.860Z,1492155532.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:53.315Z,1492155533.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:53.658Z,1492155533.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:54.098Z,1492155534.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:54.479Z,1492155534.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:54.866Z,1492155534.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:55.325Z,1492155535.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:55.647Z,1492155535.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:56.060Z,1492155536.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:56.501Z,1492155536.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:56.849Z,1492155536.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:57.390Z,1492155537.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:57.837Z,1492155537.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:58.250Z,1492155538.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:58.694Z,1492155538.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:59.034Z,1492155539.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:59.457Z,1492155539.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:59.506Z,1492155539.506 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:59.507Z,1492155539.507 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-04-14T07:38:59.507Z,1492155539.507 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:38:59.653Z,1492155539.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:38:59.848Z,1492155539.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:38:59.848Z,1492155539.848 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-04-14T07:38:59.848Z,1492155539.848 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:38:59.969Z,1492155539.969 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:38:59.969Z,1492155539.969 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:38:59.969Z,1492155539.969 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-04-14T07:39:00.191Z,1492155540.191 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:39:00.192Z,1492155540.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:39:00.192Z,1492155540.192 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:39:00.325Z,1492155540.325 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:39:00.325Z,1492155540.325 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-04-14T07:39:00.593Z,1492155540.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:39:00.594Z,1492155540.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:39:00.594Z,1492155540.594 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:39:01.027Z,1492155541.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:01.396Z,1492155541.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:01.837Z,1492155541.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:02.190Z,1492155542.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:02.589Z,1492155542.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:03.023Z,1492155543.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:03.378Z,1492155543.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:03.923Z,1492155543.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:04.198Z,1492155544.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:04.571Z,1492155544.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:05.019Z,1492155545.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:05.376Z,1492155545.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:05.867Z,1492155545.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:06.184Z,1492155546.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:06.645Z,1492155546.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:06.987Z,1492155546.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:07.384Z,1492155547.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:07.960Z,1492155547.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:08.207Z,1492155548.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:08.623Z,1492155548.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:08.996Z,1492155548.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:09.388Z,1492155549.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:09.870Z,1492155549.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:10.177Z,1492155550.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:10.574Z,1492155550.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:10.978Z,1492155550.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:11.434Z,1492155551.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:11.789Z,1492155551.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:12.173Z,1492155552.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:12.575Z,1492155552.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:12.976Z,1492155552.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:13.400Z,1492155553.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:13.804Z,1492155553.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:14.285Z,1492155554.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:14.576Z,1492155554.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:14.972Z,1492155554.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:15.512Z,1492155555.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:15.838Z,1492155555.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:16.358Z,1492155556.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:16.600Z,1492155556.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:17.027Z,1492155557.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:17.377Z,1492155557.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:17.952Z,1492155557.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:18.311Z,1492155558.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:24.171Z,1492155564.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:24.325Z,1492155564.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:24.737Z,1492155564.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:25.141Z,1492155565.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:25.543Z,1492155565.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:25.967Z,1492155565.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:26.342Z,1492155566.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:26.750Z,1492155566.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:27.147Z,1492155567.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:27.544Z,1492155567.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:27.920Z,1492155567.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:28.375Z,1492155568.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:28.745Z,1492155568.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:29.123Z,1492155569.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:29.529Z,1492155569.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:29.917Z,1492155569.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:30.342Z,1492155570.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:30.722Z,1492155570.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:31.123Z,1492155571.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:31.524Z,1492155571.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:31.928Z,1492155571.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:32.349Z,1492155572.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:32.744Z,1492155572.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:33.119Z,1492155573.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:33.510Z,1492155573.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:33.919Z,1492155573.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:34.319Z,1492155574.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:34.814Z,1492155574.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:35.129Z,1492155575.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:35.545Z,1492155575.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:35.917Z,1492155575.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:36.360Z,1492155576.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:36.723Z,1492155576.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:37.140Z,1492155577.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:37.581Z,1492155577.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:38.046Z,1492155578.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:38.350Z,1492155578.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:38.738Z,1492155578.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:39.154Z,1492155579.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:39.509Z,1492155579.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:39.950Z,1492155579.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:40.310Z,1492155580.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:40.716Z,1492155580.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:41.114Z,1492155581.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:41.509Z,1492155581.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:41.916Z,1492155581.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:42.325Z,1492155582.325 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:39:42.325Z,1492155582.325 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:39:42.325Z,1492155582.325 [BPC1](ERROR): Communications Fault
2017-04-14T07:39:42.391Z,1492155582.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:42.446Z,1492155582.446 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:39:42.634Z,1492155582.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:39:42.749Z,1492155582.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:43.123Z,1492155583.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:43.428Z,1492155583.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:39:43.529Z,1492155583.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:43.582Z,1492155583.582 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:39:43.582Z,1492155583.582 [BPC1] No Fault, FailCount= 1
2017-04-14T07:39:44.074Z,1492155584.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:44.400Z,1492155584.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:44.721Z,1492155584.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:45.134Z,1492155585.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:45.513Z,1492155585.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:45.958Z,1492155585.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:46.326Z,1492155586.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:46.739Z,1492155586.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:47.137Z,1492155587.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:47.507Z,1492155587.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:47.972Z,1492155587.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:48.353Z,1492155588.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:48.700Z,1492155588.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:49.145Z,1492155589.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:49.543Z,1492155589.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:50.019Z,1492155590.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:50.383Z,1492155590.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:50.833Z,1492155590.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:51.147Z,1492155591.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:51.559Z,1492155591.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:51.986Z,1492155591.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:52.339Z,1492155592.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:52.744Z,1492155592.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:53.119Z,1492155593.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:53.522Z,1492155593.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:53.944Z,1492155593.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:54.336Z,1492155594.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:54.779Z,1492155594.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:55.131Z,1492155595.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:55.523Z,1492155595.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:55.933Z,1492155595.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:56.394Z,1492155596.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:56.754Z,1492155596.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:57.114Z,1492155597.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:57.555Z,1492155597.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:57.928Z,1492155597.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:58.378Z,1492155598.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:58.785Z,1492155598.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:59.143Z,1492155599.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:59.543Z,1492155599.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:39:59.922Z,1492155599.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:00.338Z,1492155600.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:00.720Z,1492155600.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:01.133Z,1492155601.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:01.531Z,1492155601.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:01.916Z,1492155601.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:02.325Z,1492155602.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:02.751Z,1492155602.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:03.126Z,1492155603.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:03.527Z,1492155603.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:03.941Z,1492155603.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:04.332Z,1492155604.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:04.708Z,1492155604.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:05.111Z,1492155605.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:05.516Z,1492155605.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:05.914Z,1492155605.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:06.309Z,1492155606.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:06.717Z,1492155606.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:07.128Z,1492155607.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:07.516Z,1492155607.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:07.928Z,1492155607.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:08.318Z,1492155608.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:08.737Z,1492155608.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:09.040Z,1492155609.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:40:09.118Z,1492155609.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:09.533Z,1492155609.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:09.836Z,1492155609.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:40:09.930Z,1492155609.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:10.319Z,1492155610.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:10.787Z,1492155610.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:11.130Z,1492155611.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:11.529Z,1492155611.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:11.945Z,1492155611.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:12.313Z,1492155612.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:12.751Z,1492155612.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:13.171Z,1492155613.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:13.522Z,1492155613.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:13.938Z,1492155613.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:14.458Z,1492155614.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:14.730Z,1492155614.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:15.131Z,1492155615.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:15.524Z,1492155615.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:16.046Z,1492155616.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:16.316Z,1492155616.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:16.772Z,1492155616.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:17.138Z,1492155617.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:17.540Z,1492155617.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:17.917Z,1492155617.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:18.315Z,1492155618.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:22.251Z,1492155622.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:22.393Z,1492155622.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:22.731Z,1492155622.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:23.164Z,1492155623.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:23.556Z,1492155623.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:23.934Z,1492155623.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:24.335Z,1492155624.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:24.792Z,1492155624.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:25.299Z,1492155625.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:25.618Z,1492155625.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:25.949Z,1492155625.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:26.386Z,1492155626.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:26.740Z,1492155626.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:27.178Z,1492155627.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:27.559Z,1492155627.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:27.937Z,1492155627.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:28.348Z,1492155628.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:28.759Z,1492155628.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:29.233Z,1492155629.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:29.527Z,1492155629.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:29.942Z,1492155629.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:30.334Z,1492155630.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:30.727Z,1492155630.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:31.141Z,1492155631.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:31.531Z,1492155631.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:31.990Z,1492155631.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:32.376Z,1492155632.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:32.782Z,1492155632.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:33.168Z,1492155633.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:33.565Z,1492155633.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:33.952Z,1492155633.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:34.343Z,1492155634.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:34.740Z,1492155634.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:35.159Z,1492155635.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:35.542Z,1492155635.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:35.947Z,1492155635.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:36.352Z,1492155636.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:36.752Z,1492155636.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:37.126Z,1492155637.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:37.532Z,1492155637.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:37.952Z,1492155637.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:38.336Z,1492155638.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:38.787Z,1492155638.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:39.158Z,1492155639.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:39.582Z,1492155639.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:39.942Z,1492155639.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:40.325Z,1492155640.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:40.778Z,1492155640.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:41.130Z,1492155641.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:41.562Z,1492155641.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:41.969Z,1492155641.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:42.346Z,1492155642.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:42.740Z,1492155642.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:43.154Z,1492155643.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:43.525Z,1492155643.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:43.944Z,1492155643.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:44.345Z,1492155644.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:44.721Z,1492155644.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:45.153Z,1492155645.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:45.569Z,1492155645.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:45.941Z,1492155645.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:46.345Z,1492155646.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:46.757Z,1492155646.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:47.144Z,1492155647.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:47.521Z,1492155647.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:47.974Z,1492155647.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:48.325Z,1492155648.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:48.732Z,1492155648.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:49.132Z,1492155649.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:49.572Z,1492155649.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:49.935Z,1492155649.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:50.330Z,1492155650.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:50.748Z,1492155650.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:51.141Z,1492155651.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:51.584Z,1492155651.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:51.966Z,1492155651.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:52.351Z,1492155652.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:52.753Z,1492155652.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:53.146Z,1492155653.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:53.544Z,1492155653.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:53.940Z,1492155653.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:54.424Z,1492155654.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:54.762Z,1492155654.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:55.191Z,1492155655.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:55.666Z,1492155655.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:56.041Z,1492155656.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:56.380Z,1492155656.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:56.739Z,1492155656.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:57.142Z,1492155657.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:57.536Z,1492155657.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:57.970Z,1492155657.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:58.348Z,1492155658.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:58.751Z,1492155658.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:59.123Z,1492155659.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:59.539Z,1492155659.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:40:59.936Z,1492155659.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:00.398Z,1492155660.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:00.735Z,1492155660.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:01.179Z,1492155661.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:01.544Z,1492155661.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:01.946Z,1492155661.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:02.335Z,1492155662.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:02.731Z,1492155662.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:03.133Z,1492155663.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:03.568Z,1492155663.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:03.979Z,1492155663.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:04.376Z,1492155664.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:04.730Z,1492155664.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:05.139Z,1492155665.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:05.543Z,1492155665.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:06.056Z,1492155666.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:06.407Z,1492155666.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:06.552Z,1492155666.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:06.771Z,1492155666.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:06.956Z,1492155666.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:07.164Z,1492155667.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:07.591Z,1492155667.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:08.036Z,1492155668.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:08.403Z,1492155668.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:08.761Z,1492155668.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:09.150Z,1492155669.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:09.632Z,1492155669.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:09.933Z,1492155669.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:10.426Z,1492155670.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:10.774Z,1492155670.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:11.151Z,1492155671.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:11.540Z,1492155671.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:11.954Z,1492155671.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:12.340Z,1492155672.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:12.743Z,1492155672.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:13.144Z,1492155673.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:13.620Z,1492155673.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:13.948Z,1492155673.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:14.343Z,1492155674.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:14.742Z,1492155674.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:15.145Z,1492155675.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:15.617Z,1492155675.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:15.944Z,1492155675.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:16.337Z,1492155676.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:16.736Z,1492155676.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:17.162Z,1492155677.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:17.528Z,1492155677.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:17.947Z,1492155677.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:18.337Z,1492155678.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:18.345Z,1492155678.345 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:41:18.345Z,1492155678.345 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:41:18.345Z,1492155678.345 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:41:18.345Z,1492155678.345 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:41:20.496Z,1492155680.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:21.292Z,1492155681.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:22.146Z,1492155682.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:22.156Z,1492155682.156 [Default:CheckIn:D] Stopped
2017-04-14T07:41:22.156Z,1492155682.156 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:41:22.314Z,1492155682.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 255.280615 min 
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn:E] Stopped
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn] Stopped
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:41:22.340Z,1492155682.340 [Default:CheckIn](INFO): Running loop #37
2017-04-14T07:41:22.340Z,1492155682.341 [Default:CheckIn] Running Loop=37
2017-04-14T07:41:22.341Z,1492155682.341 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:41:22.341Z,1492155682.341 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:41:22.702Z,1492155682.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:23.032Z,1492155683.033 [NAL9602](INFO): Powering up
2017-04-14T07:41:23.143Z,1492155683.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:23.455Z,1492155683.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:23.926Z,1492155683.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:24.318Z,1492155684.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:24.692Z,1492155684.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:25.101Z,1492155685.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:25.502Z,1492155685.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:25.880Z,1492155685.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:26.257Z,1492155686.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:26.693Z,1492155686.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:27.086Z,1492155687.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:27.500Z,1492155687.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:27.882Z,1492155687.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:28.296Z,1492155688.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:28.700Z,1492155688.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:29.135Z,1492155689.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:29.509Z,1492155689.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:29.914Z,1492155689.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:30.400Z,1492155690.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:30.713Z,1492155690.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:31.111Z,1492155691.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:31.495Z,1492155691.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:31.897Z,1492155691.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:32.320Z,1492155692.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:32.666Z,1492155692.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:32.996Z,1492155692.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:33.098Z,1492155693.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:33.504Z,1492155693.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:33.792Z,1492155693.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:33.821Z,1492155693.821 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:41:33.896Z,1492155693.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:34.282Z,1492155694.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:34.497Z,1492155694.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:34.699Z,1492155694.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:35.090Z,1492155695.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:35.292Z,1492155695.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:35.488Z,1492155695.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:35.885Z,1492155695.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:36.285Z,1492155696.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:36.673Z,1492155696.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:37.063Z,1492155697.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:37.590Z,1492155697.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:37.919Z,1492155697.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:38.301Z,1492155698.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:38.684Z,1492155698.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:39.142Z,1492155699.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:39.482Z,1492155699.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:39.955Z,1492155699.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:40.306Z,1492155700.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:40.662Z,1492155700.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:41.064Z,1492155701.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:41.476Z,1492155701.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:41.891Z,1492155701.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:42.315Z,1492155702.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:42.770Z,1492155702.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:43.091Z,1492155703.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:43.609Z,1492155703.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:43.935Z,1492155703.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:44.342Z,1492155704.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:44.622Z,1492155704.622 [NAL9602](INFO): SBD MO Status=0, MOMSN=2130, MT Status=0, MTMSN=0
2017-04-14T07:41:44.622Z,1492155704.622 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:41:44.689Z,1492155704.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:45.101Z,1492155705.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:45.518Z,1492155705.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:45.930Z,1492155705.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:46.290Z,1492155706.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:46.711Z,1492155706.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:46.960Z,1492155706.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:47.090Z,1492155707.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:47.470Z,1492155707.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:47.756Z,1492155707.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:41:47.958Z,1492155707.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:48.324Z,1492155708.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:48.711Z,1492155708.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:49.076Z,1492155709.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:49.499Z,1492155709.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:49.887Z,1492155709.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:50.282Z,1492155710.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:50.298Z,1492155710.297 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:50.298Z,1492155710.298 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:41:50.298Z,1492155710.298 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:41:50.344Z,1492155710.344 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:41:50.713Z,1492155710.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:50.791Z,1492155710.791 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:41:50.791Z,1492155710.791 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:41:51.105Z,1492155711.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:51.111Z,1492155711.111 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:41:51.112Z,1492155711.112 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:41:51.112Z,1492155711.112 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:41:51.646Z,1492155711.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:51.888Z,1492155711.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:52.361Z,1492155712.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:52.675Z,1492155712.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:53.114Z,1492155713.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:53.477Z,1492155713.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:53.930Z,1492155713.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:54.346Z,1492155714.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:54.688Z,1492155714.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:55.076Z,1492155715.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:55.587Z,1492155715.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:55.951Z,1492155715.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:56.280Z,1492155716.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:56.659Z,1492155716.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:57.104Z,1492155717.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:57.660Z,1492155717.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:58.053Z,1492155718.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:58.431Z,1492155718.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:58.754Z,1492155718.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:59.186Z,1492155719.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:59.522Z,1492155719.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:41:59.928Z,1492155719.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:00.312Z,1492155720.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:00.424Z,1492155720.424 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:00.424Z,1492155720.424 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-04-14T07:42:00.424Z,1492155720.424 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-04-14T07:42:00.498Z,1492155720.498 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-04-14T07:42:00.699Z,1492155720.699 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:00.700Z,1492155720.700 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-04-14T07:42:00.700Z,1492155720.700 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-04-14T07:42:00.741Z,1492155720.741 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-04-14T07:42:00.741Z,1492155720.741 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-04-14T07:42:00.741Z,1492155720.741 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-04-14T07:42:01.107Z,1492155721.107 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-04-14T07:42:01.108Z,1492155721.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:42:01.108Z,1492155721.108 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:42:01.140Z,1492155721.139 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-04-14T07:42:01.140Z,1492155721.140 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-04-14T07:42:01.482Z,1492155721.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-04-14T07:42:01.482Z,1492155721.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:42:01.483Z,1492155721.483 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:42:01.885Z,1492155721.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:02.294Z,1492155722.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:02.729Z,1492155722.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:03.112Z,1492155723.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:03.507Z,1492155723.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:03.984Z,1492155723.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:04.297Z,1492155724.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:04.700Z,1492155724.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:05.097Z,1492155725.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:05.559Z,1492155725.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:05.919Z,1492155725.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:06.293Z,1492155726.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:06.829Z,1492155726.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:07.191Z,1492155727.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:07.749Z,1492155727.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:07.962Z,1492155727.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:42:08.285Z,1492155728.285 [NAL9602](INFO): GPS fix at 20170414T074231: (36.802387, -121.787238)
2017-04-14T07:42:08.440Z,1492155728.440 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:42:08.440Z,1492155728.440 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:42:14.862Z,1492155734.862 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0152.lzma
2017-04-14T07:42:15.642Z,1492155735.642 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0152.lzma.bak
2017-04-14T07:42:15.642Z,1492155735.642 [DataOverHttps](INFO): SBD MOMSN=4885442
2017-04-14T07:42:21.553Z,1492155741.553 [NAL9602](INFO): Powering down
2017-04-14T07:42:28.142Z,1492155748.142 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0153.lzma
2017-04-14T07:42:28.643Z,1492155748.643 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:42:28.938Z,1492155748.938 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0153.lzma.bak
2017-04-14T07:42:28.938Z,1492155748.938 [DataOverHttps](INFO): SBD MOMSN=4885445
2017-04-14T07:42:29.538Z,1492155749.538 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:42:29.539Z,1492155749.539 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:42:29.539Z,1492155749.539 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:42:44.372Z,1492155764.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:42:45.168Z,1492155765.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:10.192Z,1492155790.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:10.988Z,1492155790.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:11.784Z,1492155791.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:12.552Z,1492155792.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:13.352Z,1492155793.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:14.156Z,1492155794.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:14.564Z,1492155794.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:15.362Z,1492155795.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:15.968Z,1492155795.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:16.764Z,1492155796.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:17.560Z,1492155797.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:17.968Z,1492155797.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:18.764Z,1492155798.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:19.568Z,1492155799.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:19.972Z,1492155799.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:20.777Z,1492155800.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:21.572Z,1492155801.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:21.976Z,1492155801.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:22.772Z,1492155802.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:23.568Z,1492155803.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:24.028Z,1492155804.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:24.824Z,1492155804.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:25.620Z,1492155805.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:26.320Z,1492155806.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:27.116Z,1492155807.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:27.923Z,1492155807.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:28.328Z,1492155808.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:29.125Z,1492155809.125 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:29.832Z,1492155809.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:30.628Z,1492155810.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:31.424Z,1492155811.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:31.928Z,1492155811.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:32.724Z,1492155812.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:33.520Z,1492155813.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:33.924Z,1492155813.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:34.720Z,1492155814.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:35.206Z,1492155815.206 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T07:43:35.206Z,1492155815.206 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:43:35.206Z,1492155815.206 [BPC1](ERROR): Data Fault
2017-04-14T07:43:35.296Z,1492155815.296 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:43:35.516Z,1492155815.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:35.920Z,1492155815.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:36.199Z,1492155816.199 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:43:36.199Z,1492155816.199 [BPC1] No Fault, FailCount= 1
2017-04-14T07:43:36.716Z,1492155816.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:37.512Z,1492155817.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:37.992Z,1492155817.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:38.789Z,1492155818.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:39.584Z,1492155819.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:40.324Z,1492155820.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:41.120Z,1492155821.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:41.916Z,1492155821.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:42.364Z,1492155822.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:43.160Z,1492155823.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:43.840Z,1492155823.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:44.646Z,1492155824.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:45.440Z,1492155825.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:45.860Z,1492155825.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:46.657Z,1492155826.657 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:47.452Z,1492155827.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:47.856Z,1492155827.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:48.652Z,1492155828.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:49.448Z,1492155829.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:49.876Z,1492155829.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:50.672Z,1492155830.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:51.470Z,1492155831.470 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:51.928Z,1492155831.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:52.724Z,1492155832.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:53.520Z,1492155833.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:54.292Z,1492155834.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:55.088Z,1492155835.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:55.884Z,1492155835.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:56.324Z,1492155836.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:57.121Z,1492155837.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:57.884Z,1492155837.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:58.680Z,1492155838.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:59.476Z,1492155839.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:43:59.880Z,1492155839.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:00.676Z,1492155840.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:01.484Z,1492155841.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:01.888Z,1492155841.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:02.684Z,1492155842.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:03.480Z,1492155843.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:03.884Z,1492155843.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:04.680Z,1492155844.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:05.476Z,1492155845.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:05.924Z,1492155845.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:06.720Z,1492155846.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:07.516Z,1492155847.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:08.284Z,1492155848.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:09.080Z,1492155849.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:09.876Z,1492155849.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:10.304Z,1492155850.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:11.100Z,1492155851.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:11.860Z,1492155851.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:12.656Z,1492155852.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:13.452Z,1492155853.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:13.856Z,1492155853.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:14.652Z,1492155854.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:15.448Z,1492155855.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:15.852Z,1492155855.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:16.648Z,1492155856.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:17.444Z,1492155857.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:17.848Z,1492155857.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:18.644Z,1492155858.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:19.440Z,1492155859.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:19.894Z,1492155859.894 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:20.688Z,1492155860.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:21.484Z,1492155861.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:22.256Z,1492155862.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:23.052Z,1492155863.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:23.848Z,1492155863.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:24.276Z,1492155864.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:25.078Z,1492155865.078 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:25.820Z,1492155865.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:26.616Z,1492155866.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:27.412Z,1492155867.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:27.816Z,1492155867.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:28.612Z,1492155868.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:29.408Z,1492155869.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:29.812Z,1492155869.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:30.608Z,1492155870.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:31.406Z,1492155871.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:31.812Z,1492155871.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:32.608Z,1492155872.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:33.408Z,1492155873.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:33.848Z,1492155873.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:34.644Z,1492155874.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:35.440Z,1492155875.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:36.204Z,1492155876.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:37.000Z,1492155877.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:37.796Z,1492155877.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:38.200Z,1492155878.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:38.996Z,1492155878.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:39.748Z,1492155879.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:40.545Z,1492155880.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:41.340Z,1492155881.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:41.744Z,1492155881.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:42.540Z,1492155882.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:43.336Z,1492155883.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:43.744Z,1492155883.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:44.540Z,1492155884.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:45.340Z,1492155885.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:45.748Z,1492155885.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:46.546Z,1492155886.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:47.342Z,1492155887.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:47.812Z,1492155887.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:48.610Z,1492155888.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:49.404Z,1492155889.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:50.156Z,1492155890.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:50.956Z,1492155890.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:44:51.203Z,1492155891.203 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:44:51.203Z,1492155891.203 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:44:51.203Z,1492155891.203 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:44:51.224Z,1492155891.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:44:51.597Z,1492155891.597 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:44:51.598Z,1492155891.598 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:44:51.964Z,1492155891.964 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:44:51.964Z,1492155891.964 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:44:51.965Z,1492155891.964 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:45:01.892Z,1492155901.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:45:02.689Z,1492155902.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:45:46.064Z,1492155946.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:45:46.864Z,1492155946.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:05.478Z,1492155965.478 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:46:05.478Z,1492155965.478 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:46:05.479Z,1492155965.478 [BPC1](ERROR): Communications Fault
2017-04-14T07:46:05.627Z,1492155965.627 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:46:06.864Z,1492155966.864 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:46:06.864Z,1492155966.864 [BPC1] No Fault, FailCount= 1
2017-04-14T07:46:14.017Z,1492155974.017 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:14.812Z,1492155974.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:26.440Z,1492155986.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:27.236Z,1492155987.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:28.020Z,1492155988.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:28.816Z,1492155988.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:29.614Z,1492155989.615 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:30.020Z,1492155990.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:39.708Z,1492155999.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:46:40.505Z,1492156000.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:47:23.956Z,1492156043.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:47:24.752Z,1492156044.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:47:29.946Z,1492156049.946 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:47:29.946Z,1492156049.946 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:47:29.946Z,1492156049.946 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:47:29.946Z,1492156049.946 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:47:30.359Z,1492156050.359 [Default:CheckIn:D] Stopped
2017-04-14T07:47:30.359Z,1492156050.359 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:47:30.723Z,1492156050.723 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 261.417334 min 
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn:E] Stopped
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn] Stopped
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn](INFO): Running loop #38
2017-04-14T07:47:30.740Z,1492156050.740 [Default:CheckIn] Running Loop=38
2017-04-14T07:47:30.741Z,1492156050.741 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:47:30.741Z,1492156050.741 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:47:34.501Z,1492156054.501 [NAL9602](INFO): Powering up
2017-04-14T07:47:44.904Z,1492156064.904 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:47:44.904Z,1492156064.904 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:47:44.904Z,1492156064.904 [BPC1](ERROR): Communications Fault
2017-04-14T07:47:45.196Z,1492156065.196 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:47:45.661Z,1492156065.661 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:47:46.213Z,1492156066.213 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:47:46.213Z,1492156066.213 [BPC1] No Fault, FailCount= 1
2017-04-14T07:47:50.364Z,1492156070.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:47:51.160Z,1492156071.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:47:52.115Z,1492156072.115 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:47:52.115Z,1492156072.115 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:47:52.115Z,1492156072.115 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:47:52.167Z,1492156072.167 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:47:52.531Z,1492156072.531 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:47:52.531Z,1492156072.531 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:47:52.921Z,1492156072.921 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:47:52.922Z,1492156072.922 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:47:52.922Z,1492156072.922 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:48:03.588Z,1492156083.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:48:04.384Z,1492156084.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:48:06.085Z,1492156086.085 [NAL9602](INFO): SBD MO Status=0, MOMSN=2131, MT Status=0, MTMSN=0
2017-04-14T07:48:06.085Z,1492156086.085 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:48:07.264Z,1492156087.264 [NAL9602](INFO): GPS fix at 20170414T074830: (36.802324, -121.787116)
2017-04-14T07:48:07.473Z,1492156087.473 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:48:07.473Z,1492156087.473 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:48:12.792Z,1492156092.792 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0156.lzma
2017-04-14T07:48:13.582Z,1492156093.582 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0156.lzma.bak
2017-04-14T07:48:13.582Z,1492156093.582 [DataOverHttps](INFO): SBD MOMSN=4885450
2017-04-14T07:48:17.917Z,1492156097.917 [NAL9602](INFO): Powering down
2017-04-14T07:48:23.834Z,1492156103.833 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0157.lzma
2017-04-14T07:48:24.618Z,1492156104.618 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0157.lzma.bak
2017-04-14T07:48:24.618Z,1492156104.618 [DataOverHttps](INFO): SBD MOMSN=4885453
2017-04-14T07:48:25.149Z,1492156105.149 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:48:25.149Z,1492156105.149 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:48:25.149Z,1492156105.149 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:48:31.152Z,1492156111.152 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:48:31.152Z,1492156111.152 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:48:31.152Z,1492156111.152 [BPC1](ERROR): Communications Fault
2017-04-14T07:48:31.184Z,1492156111.184 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:48:32.083Z,1492156112.083 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:48:32.083Z,1492156112.083 [BPC1] No Fault, FailCount= 1
2017-04-14T07:49:28.220Z,1492156168.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:49:29.025Z,1492156169.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:49:29.748Z,1492156169.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:49:30.544Z,1492156170.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:49:42.145Z,1492156182.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:49:42.940Z,1492156182.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:50:33.099Z,1492156233.099 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:50:33.100Z,1492156233.099 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:50:33.100Z,1492156233.100 [BPC1](ERROR): Communications Fault
2017-04-14T07:50:33.248Z,1492156233.248 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:50:34.238Z,1492156234.239 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:50:34.239Z,1492156234.239 [BPC1] No Fault, FailCount= 1
2017-04-14T07:50:39.598Z,1492156239.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:50:40.392Z,1492156240.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:50:53.315Z,1492156253.315 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:50:53.315Z,1492156253.315 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:50:53.315Z,1492156253.315 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:50:53.330Z,1492156253.330 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:50:53.731Z,1492156253.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:50:53.731Z,1492156253.731 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:50:54.122Z,1492156254.122 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:50:54.122Z,1492156254.122 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:50:54.123Z,1492156254.122 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:51:06.036Z,1492156266.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:06.832Z,1492156266.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:07.560Z,1492156267.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:08.357Z,1492156268.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:09.152Z,1492156269.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:09.556Z,1492156269.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:10.352Z,1492156270.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:11.096Z,1492156271.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:11.892Z,1492156271.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:12.688Z,1492156272.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:13.332Z,1492156273.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:14.128Z,1492156274.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:14.924Z,1492156274.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:15.328Z,1492156275.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:16.124Z,1492156276.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:16.921Z,1492156276.921 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:17.324Z,1492156277.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:18.120Z,1492156278.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:18.916Z,1492156278.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:19.320Z,1492156279.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:20.116Z,1492156280.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:20.912Z,1492156280.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:21.534Z,1492156281.534 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:22.328Z,1492156282.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:29.896Z,1492156289.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:30.692Z,1492156290.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:31.120Z,1492156291.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:31.916Z,1492156291.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:32.715Z,1492156292.715 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:33.168Z,1492156293.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:33.973Z,1492156293.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:34.773Z,1492156294.773 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:35.544Z,1492156295.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:36.340Z,1492156296.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:37.136Z,1492156297.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:37.540Z,1492156297.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:38.336Z,1492156298.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:39.112Z,1492156299.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:39.908Z,1492156299.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:40.704Z,1492156300.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:41.108Z,1492156301.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:41.908Z,1492156301.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:42.704Z,1492156302.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:43.109Z,1492156303.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:43.904Z,1492156303.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:44.700Z,1492156304.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:45.104Z,1492156305.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:45.908Z,1492156305.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:46.706Z,1492156306.706 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:47.265Z,1492156307.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:48.060Z,1492156308.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:48.856Z,1492156308.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:49.568Z,1492156309.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:50.366Z,1492156310.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:51.160Z,1492156311.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:51.564Z,1492156311.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:52.360Z,1492156312.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:53.068Z,1492156313.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:53.864Z,1492156313.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:54.668Z,1492156314.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:55.172Z,1492156315.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:55.972Z,1492156315.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:56.770Z,1492156316.770 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:57.176Z,1492156317.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:57.985Z,1492156317.985 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:58.780Z,1492156318.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:58.986Z,1492156318.986 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T07:51:58.986Z,1492156318.986 [BPC1] Data Fault, FailCount= 1
2017-04-14T07:51:58.986Z,1492156318.986 [BPC1](ERROR): Data Fault
2017-04-14T07:51:59.041Z,1492156319.041 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T07:51:59.184Z,1492156319.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:51:59.980Z,1492156319.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:00.235Z,1492156320.235 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:52:00.235Z,1492156320.236 [BPC1] No Fault, FailCount= 1
2017-04-14T07:52:00.776Z,1492156320.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:01.180Z,1492156321.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:01.978Z,1492156321.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:02.772Z,1492156322.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:03.524Z,1492156323.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:04.320Z,1492156324.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:17.480Z,1492156337.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:18.276Z,1492156338.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:30.269Z,1492156350.269 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T07:52:43.857Z,1492156363.857 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:52:44.652Z,1492156364.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:53:25.633Z,1492156405.634 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T07:53:25.634Z,1492156405.634 [Default:CheckIn:C.Wait] Stopped
2017-04-14T07:53:25.634Z,1492156405.634 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T07:53:25.634Z,1492156405.634 [Default:CheckIn:D] Running Loop=1
2017-04-14T07:53:25.956Z,1492156405.956 [Default:CheckIn:D] Stopped
2017-04-14T07:53:25.956Z,1492156405.956 [Default:CheckIn:E] Running Loop=1
2017-04-14T07:53:26.402Z,1492156406.402 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 267.343962 min 
2017-04-14T07:53:26.403Z,1492156406.402 [Default:CheckIn:E] Stopped
2017-04-14T07:53:26.403Z,1492156406.403 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T07:53:26.403Z,1492156406.403 [Default:CheckIn] Stopped
2017-04-14T07:53:26.411Z,1492156406.411 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T07:53:26.411Z,1492156406.411 [Default:CheckIn](INFO): Running loop #39
2017-04-14T07:53:26.411Z,1492156406.411 [Default:CheckIn] Running Loop=39
2017-04-14T07:53:26.412Z,1492156406.412 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T07:53:26.412Z,1492156406.412 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T07:53:30.592Z,1492156410.592 [NAL9602](INFO): Powering up
2017-04-14T07:53:41.781Z,1492156421.781 [NAL9602](INFO): NAL9602 initialized
2017-04-14T07:53:54.248Z,1492156434.248 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:53:54.248Z,1492156434.248 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:53:54.248Z,1492156434.248 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:53:54.278Z,1492156434.278 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:53:54.707Z,1492156434.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:53:54.707Z,1492156434.707 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:53:55.090Z,1492156435.091 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:53:55.095Z,1492156435.095 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:53:55.096Z,1492156435.096 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:54:00.982Z,1492156440.982 [NAL9602](INFO): SBD MO Status=2, MOMSN=2132, MT Status=2, MTMSN=0
2017-04-14T07:54:00.982Z,1492156440.982 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T07:54:07.024Z,1492156447.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:54:07.820Z,1492156447.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:54:21.736Z,1492156461.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:54:22.532Z,1492156462.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:54:52.844Z,1492156492.844 [PNI_TCM](ERROR): CRC does not match. Expected:0x9860 got:0x32668
2017-04-14T07:54:54.828Z,1492156494.828 [PNI_TCM](ERROR): CRC does not match. Expected:0x35869 got:0x16820
2017-04-14T07:54:55.609Z,1492156495.609 [PNI_TCM](ERROR): CRC does not match. Expected:0x41380 got:0x54557
2017-04-14T07:54:57.205Z,1492156497.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x51480 got:0x47900
2017-04-14T07:54:59.623Z,1492156499.623 [PNI_TCM](ERROR): CRC does not match. Expected:0x48620 got:0x33262
2017-04-14T07:55:19.160Z,1492156519.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:19.973Z,1492156519.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:30.860Z,1492156530.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:31.656Z,1492156531.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:45.568Z,1492156545.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:46.364Z,1492156546.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:55:48.551Z,1492156548.551 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:55:48.551Z,1492156548.551 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:55:48.551Z,1492156548.551 [BPC1](ERROR): Communications Fault
2017-04-14T07:55:48.613Z,1492156548.612 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:55:49.802Z,1492156549.802 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:55:49.802Z,1492156549.802 [BPC1] No Fault, FailCount= 1
2017-04-14T07:56:47.922Z,1492156607.922 [NAL9602](INFO): SBD MO Status=0, MOMSN=2132, MT Status=0, MTMSN=0
2017-04-14T07:56:47.922Z,1492156607.922 [NAL9602](INFO): No messages in MT queue
2017-04-14T07:56:49.124Z,1492156609.125 [NAL9602](INFO): GPS fix at 20170414T075713: (36.802356, -121.787116)
2017-04-14T07:56:49.183Z,1492156609.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 538.009, recording fix residuals...
2017-04-14T07:56:49.226Z,1492156609.226 [UniversalFixResidualReporter](INFO): Fix residual: 100.6 %DT, over the last 538.0 m. Residual distance 541.2 m at bearing -155.8 degrees. Fix at (36.8024, -121.7871) with 3.5 m made good.
2017-04-14T07:56:49.227Z,1492156609.227 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T07:56:49.227Z,1492156609.227 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T07:56:49.572Z,1492156609.572 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:56:49.572Z,1492156609.572 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:56:49.572Z,1492156609.572 [BPC1](ERROR): Communications Fault
2017-04-14T07:56:49.627Z,1492156609.627 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:56:54.107Z,1492156614.107 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:56:54.107Z,1492156614.107 [BPC1] No Fault, FailCount= 1
2017-04-14T07:56:54.444Z,1492156614.444 [DataOverHttps](INFO): Sending 211 bytes from file Logs/20170414T032153/Courier0160.lzma
2017-04-14T07:56:55.051Z,1492156615.051 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0160.lzma.bak
2017-04-14T07:56:55.051Z,1492156615.051 [DataOverHttps](INFO): SBD MOMSN=4885464
2017-04-14T07:56:55.158Z,1492156615.158 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:56:55.158Z,1492156615.158 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T07:56:55.158Z,1492156615.158 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:56:55.172Z,1492156615.172 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:56:55.532Z,1492156615.532 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:56:55.532Z,1492156615.532 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T07:56:55.965Z,1492156615.965 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:56:55.965Z,1492156615.966 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:56:55.966Z,1492156615.966 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T07:57:03.787Z,1492156623.787 [NAL9602](INFO): Powering down
2017-04-14T07:57:09.488Z,1492156629.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:57:10.292Z,1492156630.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:57:11.782Z,1492156631.782 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:57:11.782Z,1492156631.782 [BPC1] Communications Fault, FailCount= 2
2017-04-14T07:57:11.782Z,1492156631.782 [BPC1](ERROR): Communications Fault
2017-04-14T07:57:11.891Z,1492156631.891 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:57:11.926Z,1492156631.926 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0161.lzma
2017-04-14T07:57:12.714Z,1492156632.714 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0161.lzma.bak
2017-04-14T07:57:12.714Z,1492156632.714 [DataOverHttps](INFO): SBD MOMSN=4885467
2017-04-14T07:57:12.858Z,1492156632.858 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:57:12.858Z,1492156632.858 [BPC1] No Fault, FailCount= 2
2017-04-14T07:57:13.265Z,1492156633.265 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T07:57:13.266Z,1492156633.266 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T07:57:13.266Z,1492156633.266 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T07:57:23.424Z,1492156643.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:57:24.220Z,1492156644.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T07:59:18.458Z,1492156758.458 [BPC1](ERROR): Failed to receive battery data
2017-04-14T07:59:18.458Z,1492156758.458 [BPC1] Communications Fault, FailCount= 1
2017-04-14T07:59:18.458Z,1492156758.458 [BPC1](ERROR): Communications Fault
2017-04-14T07:59:18.538Z,1492156758.537 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T07:59:19.712Z,1492156759.712 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T07:59:19.712Z,1492156759.712 [BPC1] No Fault, FailCount= 1
2017-04-14T07:59:56.134Z,1492156796.134 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T07:59:56.134Z,1492156796.134 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T07:59:56.134Z,1492156796.134 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T07:59:56.164Z,1492156796.164 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T07:59:56.555Z,1492156796.555 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T07:59:56.555Z,1492156796.555 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T07:59:56.922Z,1492156796.921 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T07:59:56.922Z,1492156796.922 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T07:59:56.922Z,1492156796.922 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:02:13.922Z,1492156933.921 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:02:13.922Z,1492156933.922 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:02:13.922Z,1492156933.922 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:02:13.922Z,1492156933.922 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:02:14.212Z,1492156934.212 [Default:CheckIn:D] Stopped
2017-04-14T08:02:14.212Z,1492156934.212 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 276.148210 min 
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn:E] Stopped
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn] Stopped
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:02:14.561Z,1492156934.561 [Default:CheckIn](INFO): Running loop #40
2017-04-14T08:02:14.562Z,1492156934.562 [Default:CheckIn] Running Loop=40
2017-04-14T08:02:14.562Z,1492156934.562 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:02:14.562Z,1492156934.562 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:02:20.225Z,1492156940.225 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:02:20.225Z,1492156940.225 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:02:20.225Z,1492156940.225 [BPC1](ERROR): Communications Fault
2017-04-14T08:02:20.377Z,1492156940.377 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:02:20.425Z,1492156940.425 [NAL9602](INFO): Powering up
2017-04-14T08:02:21.356Z,1492156941.355 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:02:21.356Z,1492156941.356 [BPC1] No Fault, FailCount= 1
2017-04-14T08:02:30.505Z,1492156950.505 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:02:31.609Z,1492156951.609 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:02:57.259Z,1492156977.259 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:02:57.259Z,1492156977.259 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T08:02:57.259Z,1492156977.259 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:02:57.312Z,1492156977.312 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:02:57.800Z,1492156977.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:02:57.800Z,1492156977.800 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T08:02:58.066Z,1492156978.066 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:02:58.066Z,1492156978.066 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:02:58.066Z,1492156978.066 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:03:01.608Z,1492156981.608 [NAL9602](INFO): SBD MO Status=2, MOMSN=2133, MT Status=2, MTMSN=0
2017-04-14T08:03:01.608Z,1492156981.608 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:03:13.648Z,1492156993.648 [PNI_TCM](ERROR): CRC does not match. Expected:0x5899 got:0x45220
2017-04-14T08:03:22.808Z,1492157002.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:23.605Z,1492157003.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:24.012Z,1492157004.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:24.808Z,1492157004.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:25.605Z,1492157005.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:26.072Z,1492157006.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:26.868Z,1492157006.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:27.664Z,1492157007.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:28.432Z,1492157008.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:29.228Z,1492157009.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:30.024Z,1492157010.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:30.444Z,1492157010.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:50.808Z,1492157030.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:51.604Z,1492157031.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:52.104Z,1492157032.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:52.900Z,1492157032.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:53.696Z,1492157033.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:54.100Z,1492157034.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:54.896Z,1492157034.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:55.692Z,1492157035.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:56.461Z,1492157036.461 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:57.256Z,1492157037.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:58.052Z,1492157038.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:58.456Z,1492157038.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:59.252Z,1492157039.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:03:59.962Z,1492157039.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:00.756Z,1492157040.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:01.554Z,1492157041.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:01.976Z,1492157041.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:02.772Z,1492157042.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:03.576Z,1492157043.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:04.088Z,1492157044.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:04.884Z,1492157044.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:05.680Z,1492157045.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:06.084Z,1492157046.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:06.880Z,1492157046.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:07.684Z,1492157047.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:08.088Z,1492157048.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:08.884Z,1492157048.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:09.681Z,1492157049.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:10.424Z,1492157050.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:11.221Z,1492157051.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:12.020Z,1492157052.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:12.448Z,1492157052.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:13.244Z,1492157053.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:14.020Z,1492157054.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:14.816Z,1492157054.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:15.612Z,1492157055.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:16.408Z,1492157056.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:16.812Z,1492157056.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:17.608Z,1492157057.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:18.016Z,1492157058.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:18.812Z,1492157058.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:19.608Z,1492157059.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:20.012Z,1492157060.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:20.808Z,1492157060.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:20.914Z,1492157060.914 [NAL9602](INFO): SBD MO Status=2, MOMSN=2133, MT Status=2, MTMSN=0
2017-04-14T08:04:20.914Z,1492157060.914 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:04:21.604Z,1492157061.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:22.044Z,1492157062.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:22.840Z,1492157062.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:23.638Z,1492157063.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:24.348Z,1492157064.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:25.144Z,1492157065.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:25.940Z,1492157065.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:26.344Z,1492157066.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:38.400Z,1492157078.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:39.196Z,1492157079.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:49.632Z,1492157089.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:50.036Z,1492157090.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:52.340Z,1492157092.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:04:53.136Z,1492157093.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:05:22.163Z,1492157122.163 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:05:22.163Z,1492157122.163 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:05:22.163Z,1492157122.163 [BPC1](ERROR): Communications Fault
2017-04-14T08:05:22.222Z,1492157122.222 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:05:23.163Z,1492157123.164 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:05:23.164Z,1492157123.164 [BPC1] No Fault, FailCount= 1
2017-04-14T08:05:48.180Z,1492157148.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:05:48.977Z,1492157148.977 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:05:58.298Z,1492157158.298 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:05:58.298Z,1492157158.298 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2017-04-14T08:05:58.298Z,1492157158.298 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:05:58.345Z,1492157158.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:05:58.734Z,1492157158.734 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:05:58.734Z,1492157158.734 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2017-04-14T08:05:59.134Z,1492157159.134 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:05:59.135Z,1492157159.135 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:05:59.139Z,1492157159.139 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:06:24.147Z,1492157184.148 [PNI_TCM](ERROR): CRC does not match. Expected:0x31656 got:0x7489
2017-04-14T08:07:14.695Z,1492157234.695 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-04-14T08:02:14.6Z
2017-04-14T08:07:14.696Z,1492157234.695 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:07:14.696Z,1492157234.696 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:07:21.248Z,1492157241.248 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0164.lzma
2017-04-14T08:07:22.014Z,1492157242.014 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0164.lzma.bak
2017-04-14T08:07:22.014Z,1492157242.014 [DataOverHttps](INFO): SBD MOMSN=4885511
2017-04-14T08:07:31.946Z,1492157251.946 [NAL9602](INFO): SBD MO Status=0, MOMSN=2133, MT Status=0, MTMSN=0
2017-04-14T08:07:31.946Z,1492157251.946 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:07:32.120Z,1492157252.120 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0165.lzma
2017-04-14T08:07:32.898Z,1492157252.898 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0165.lzma.bak
2017-04-14T08:07:32.898Z,1492157252.898 [DataOverHttps](INFO): SBD MOMSN=4885513
2017-04-14T08:07:33.389Z,1492157253.389 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:07:33.389Z,1492157253.389 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:07:33.389Z,1492157253.389 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:07:38.321Z,1492157258.321 [NAL9602](INFO): Powering down
2017-04-14T08:08:02.887Z,1492157282.887 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:08:02.887Z,1492157282.887 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:08:02.887Z,1492157282.887 [BPC1](ERROR): Data Fault
2017-04-14T08:08:02.942Z,1492157282.941 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:08:04.159Z,1492157284.159 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:08:04.160Z,1492157284.159 [BPC1] No Fault, FailCount= 1
2017-04-14T08:08:59.359Z,1492157339.359 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:08:59.359Z,1492157339.359 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2017-04-14T08:08:59.359Z,1492157339.359 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:08:59.373Z,1492157339.373 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:08:59.764Z,1492157339.764 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:08:59.764Z,1492157339.764 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2017-04-14T08:09:00.201Z,1492157340.201 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:09:00.201Z,1492157340.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:09:00.202Z,1492157340.202 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:09:03.318Z,1492157343.318 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:09:03.318Z,1492157343.318 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:09:03.318Z,1492157343.318 [BPC1](ERROR): Communications Fault
2017-04-14T08:09:03.380Z,1492157343.381 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:09:04.566Z,1492157344.566 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:09:04.566Z,1492157344.566 [BPC1] No Fault, FailCount= 1
2017-04-14T08:09:31.727Z,1492157371.727 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:09:31.727Z,1492157371.727 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:09:31.727Z,1492157371.727 [BPC1](ERROR): Data Fault
2017-04-14T08:09:31.756Z,1492157371.756 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:09:32.975Z,1492157372.975 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:09:32.975Z,1492157372.976 [BPC1] No Fault, FailCount= 1
2017-04-14T08:12:00.208Z,1492157520.208 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:12:00.208Z,1492157520.208 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2017-04-14T08:12:00.208Z,1492157520.208 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:12:00.271Z,1492157520.271 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:12:00.669Z,1492157520.668 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:12:00.669Z,1492157520.669 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2017-04-14T08:12:00.965Z,1492157520.965 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:12:00.965Z,1492157520.965 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:12:00.966Z,1492157520.966 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:12:08.943Z,1492157528.944 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T08:12:08.944Z,1492157528.944 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:12:08.944Z,1492157528.944 [BPC1](ERROR): Data Fault
2017-04-14T08:12:09.090Z,1492157529.090 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:12:10.237Z,1492157530.237 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:12:10.237Z,1492157530.237 [BPC1] No Fault, FailCount= 1
2017-04-14T08:12:16.980Z,1492157536.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:17.410Z,1492157537.410 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:19.688Z,1492157539.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:20.484Z,1492157540.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:30.695Z,1492157550.695 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:12:33.850Z,1492157553.849 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:12:33.850Z,1492157553.850 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:12:33.850Z,1492157553.850 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:12:33.850Z,1492157553.850 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:12:34.246Z,1492157554.246 [Default:CheckIn:D] Stopped
2017-04-14T08:12:34.246Z,1492157554.246 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:12:34.644Z,1492157554.644 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 286.482129 min 
2017-04-14T08:12:34.644Z,1492157554.644 [Default:CheckIn:E] Stopped
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn] Stopped
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn](INFO): Running loop #41
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn] Running Loop=41
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:12:34.645Z,1492157554.645 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:12:38.955Z,1492157558.955 [NAL9602](INFO): Powering up
2017-04-14T08:12:45.280Z,1492157565.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:46.076Z,1492157566.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:12:48.379Z,1492157568.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T08:12:49.941Z,1492157569.941 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:12:50.757Z,1492157570.757 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-04-14T08:12:50.757Z,1492157570.757 [NAL9602] Data Fault, FailCount= 1
2017-04-14T08:12:50.757Z,1492157570.757 [NAL9602](ERROR): Data Fault
2017-04-14T08:12:50.860Z,1492157570.861 [CBIT](ERROR): Data Fault in component: NAL9602
2017-04-14T08:12:51.144Z,1492157571.144 [NAL9602](INFO): Powering down
2017-04-14T08:12:52.003Z,1492157572.003 [CBIT](INFO): Clearing failed state for component NAL9602
2017-04-14T08:12:52.003Z,1492157572.003 [NAL9602] No Fault, FailCount= 1
2017-04-14T08:12:56.334Z,1492157576.334 [NAL9602](INFO): Powering up NAL9602
2017-04-14T08:13:07.137Z,1492157587.137 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:13:37.232Z,1492157617.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:38.028Z,1492157618.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:38.824Z,1492157618.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:39.228Z,1492157619.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:40.024Z,1492157620.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:40.820Z,1492157620.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:41.224Z,1492157621.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:42.020Z,1492157622.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:42.816Z,1492157622.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:43.616Z,1492157623.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:44.020Z,1492157624.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:44.816Z,1492157624.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:45.612Z,1492157625.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:46.016Z,1492157626.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:46.818Z,1492157626.818 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:47.228Z,1492157627.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:48.028Z,1492157628.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:48.824Z,1492157628.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:49.228Z,1492157629.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:50.024Z,1492157630.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:50.820Z,1492157630.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:51.228Z,1492157631.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:52.032Z,1492157632.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:52.828Z,1492157632.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:53.232Z,1492157633.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:54.028Z,1492157634.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:54.824Z,1492157634.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:55.228Z,1492157635.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:56.024Z,1492157636.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:56.820Z,1492157636.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:57.472Z,1492157637.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:58.268Z,1492157638.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:59.064Z,1492157639.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:13:59.468Z,1492157639.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:00.264Z,1492157640.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:01.060Z,1492157641.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:01.856Z,1492157641.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:02.652Z,1492157642.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:03.056Z,1492157643.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:03.852Z,1492157643.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:04.648Z,1492157644.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:05.052Z,1492157645.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:05.848Z,1492157645.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:06.644Z,1492157646.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:07.048Z,1492157647.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:07.692Z,1492157647.693 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:14:07.693Z,1492157647.693 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:14:07.693Z,1492157647.693 [BPC1](ERROR): Data Fault
2017-04-14T08:14:07.844Z,1492157647.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:07.962Z,1492157647.962 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:14:08.643Z,1492157648.643 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:08.970Z,1492157648.970 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:14:08.970Z,1492157648.970 [BPC1] No Fault, FailCount= 1
2017-04-14T08:14:09.136Z,1492157649.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:09.932Z,1492157649.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:10.728Z,1492157650.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:11.468Z,1492157651.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:12.264Z,1492157652.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:13.060Z,1492157653.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:13.468Z,1492157653.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:14.264Z,1492157654.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:15.012Z,1492157655.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:15.808Z,1492157655.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:16.605Z,1492157656.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:17.012Z,1492157657.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:17.809Z,1492157657.809 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:18.604Z,1492157658.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:19.025Z,1492157659.025 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:19.822Z,1492157659.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:20.619Z,1492157660.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:21.032Z,1492157661.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:21.828Z,1492157661.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:22.626Z,1492157662.626 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:23.120Z,1492157663.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:23.916Z,1492157663.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:24.712Z,1492157664.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:25.480Z,1492157665.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:26.276Z,1492157666.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:27.072Z,1492157667.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:27.476Z,1492157667.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:28.272Z,1492157668.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:28.972Z,1492157668.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:29.769Z,1492157669.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:30.564Z,1492157670.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:30.992Z,1492157670.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:31.788Z,1492157671.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:32.584Z,1492157672.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:32.996Z,1492157672.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:33.792Z,1492157673.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:34.588Z,1492157674.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:34.993Z,1492157674.993 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:35.789Z,1492157675.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:36.586Z,1492157676.586 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:37.056Z,1492157677.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:37.852Z,1492157677.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:38.648Z,1492157678.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:39.452Z,1492157679.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:39.856Z,1492157679.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:40.660Z,1492157680.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:41.412Z,1492157681.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:42.208Z,1492157682.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:43.004Z,1492157683.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:43.408Z,1492157683.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:44.204Z,1492157684.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:45.004Z,1492157685.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:45.800Z,1492157685.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:46.596Z,1492157686.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:46.000Z,1492157687.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:47.796Z,1492157687.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:48.592Z,1492157688.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:48.996Z,1492157688.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:49.792Z,1492157689.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:50.588Z,1492157690.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:51.052Z,1492157691.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:51.848Z,1492157691.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:52.660Z,1492157692.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:53.412Z,1492157693.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:54.208Z,1492157694.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:55.004Z,1492157695.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:55.440Z,1492157695.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:56.236Z,1492157696.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:56.976Z,1492157696.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:57.772Z,1492157697.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:58.568Z,1492157698.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:58.972Z,1492157698.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:14:59.768Z,1492157699.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:00.564Z,1492157700.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:00.968Z,1492157700.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:01.311Z,1492157701.311 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:15:01.311Z,1492157701.311 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 7
2017-04-14T08:15:01.311Z,1492157701.311 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:15:01.325Z,1492157701.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:15:01.731Z,1492157701.731 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:15:01.731Z,1492157701.731 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 7
2017-04-14T08:15:01.764Z,1492157701.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:02.106Z,1492157702.106 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:15:02.107Z,1492157702.107 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:15:02.111Z,1492157702.111 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:15:02.560Z,1492157702.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:02.964Z,1492157702.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:03.760Z,1492157703.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:04.556Z,1492157704.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:05.021Z,1492157705.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:05.816Z,1492157705.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:06.612Z,1492157706.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:07.388Z,1492157707.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:08.184Z,1492157708.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:08.980Z,1492157708.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:09.384Z,1492157709.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:10.180Z,1492157710.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:10.912Z,1492157710.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:11.708Z,1492157711.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:12.504Z,1492157712.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:12.956Z,1492157712.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:13.752Z,1492157713.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:14.548Z,1492157714.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:14.952Z,1492157714.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:15.748Z,1492157715.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:16.544Z,1492157716.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:16.948Z,1492157716.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:17.744Z,1492157717.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:18.540Z,1492157718.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:19.012Z,1492157719.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:19.808Z,1492157719.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:20.604Z,1492157720.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:21.368Z,1492157721.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:22.164Z,1492157722.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:22.961Z,1492157722.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:23.368Z,1492157723.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:24.172Z,1492157724.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:24.916Z,1492157724.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:25.712Z,1492157725.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:26.516Z,1492157726.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:26.920Z,1492157726.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:27.717Z,1492157727.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:28.512Z,1492157728.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:28.936Z,1492157728.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:29.732Z,1492157729.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:30.528Z,1492157730.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:30.927Z,1492157730.927 [PNI_TCM](ERROR): CRC does not match. Expected:0x5448 got:0x16820
2017-04-14T08:15:30.936Z,1492157730.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:31.740Z,1492157731.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:32.537Z,1492157732.537 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:33.008Z,1492157733.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:33.804Z,1492157733.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:34.600Z,1492157734.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:35.336Z,1492157735.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:36.132Z,1492157736.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:36.928Z,1492157736.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:37.332Z,1492157737.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:38.128Z,1492157738.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:38.864Z,1492157738.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:39.660Z,1492157739.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:40.456Z,1492157740.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:40.860Z,1492157740.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:41.656Z,1492157741.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:42.452Z,1492157742.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:42.857Z,1492157742.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:43.652Z,1492157743.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:44.448Z,1492157744.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:44.853Z,1492157744.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:45.648Z,1492157745.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:46.445Z,1492157746.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:46.912Z,1492157746.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:47.708Z,1492157747.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:48.505Z,1492157748.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:49.252Z,1492157749.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:50.048Z,1492157750.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:50.844Z,1492157750.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:51.250Z,1492157751.250 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:52.044Z,1492157752.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:52.847Z,1492157752.847 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:53.252Z,1492157753.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:54.053Z,1492157754.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:54.808Z,1492157754.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:55.604Z,1492157755.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:56.400Z,1492157756.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:56.836Z,1492157756.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:57.634Z,1492157757.634 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:58.428Z,1492157758.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:58.832Z,1492157758.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:15:59.628Z,1492157759.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:00.445Z,1492157760.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:00.892Z,1492157760.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:01.688Z,1492157761.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:02.484Z,1492157762.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:03.272Z,1492157763.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:04.068Z,1492157764.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:04.864Z,1492157764.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:05.276Z,1492157765.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:06.075Z,1492157766.075 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:06.804Z,1492157766.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:07.600Z,1492157767.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:08.396Z,1492157768.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:08.800Z,1492157768.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:09.596Z,1492157769.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:10.392Z,1492157770.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:10.816Z,1492157770.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:11.612Z,1492157771.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:12.408Z,1492157772.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:12.812Z,1492157772.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:13.610Z,1492157773.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:14.406Z,1492157774.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:14.880Z,1492157774.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:15.676Z,1492157775.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:16.472Z,1492157776.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:17.224Z,1492157777.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:18.021Z,1492157778.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:18.816Z,1492157778.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:19.221Z,1492157779.221 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:20.016Z,1492157780.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:20.776Z,1492157780.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:21.572Z,1492157781.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:22.368Z,1492157782.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:22.792Z,1492157782.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:23.588Z,1492157783.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:24.384Z,1492157784.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:24.788Z,1492157784.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:25.584Z,1492157785.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:26.380Z,1492157786.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:26.784Z,1492157786.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:27.580Z,1492157787.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:28.380Z,1492157788.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:28.844Z,1492157788.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:29.640Z,1492157789.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:29.790Z,1492157789.790 [NAL9602](INFO): SBD MO Status=2, MOMSN=2134, MT Status=2, MTMSN=0
2017-04-14T08:16:29.790Z,1492157789.790 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:16:30.436Z,1492157790.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:31.220Z,1492157791.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:32.016Z,1492157792.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:32.812Z,1492157792.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:33.217Z,1492157793.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:34.012Z,1492157794.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:34.788Z,1492157794.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:35.585Z,1492157795.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:36.382Z,1492157796.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:36.788Z,1492157796.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:37.584Z,1492157797.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:38.382Z,1492157798.382 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:38.788Z,1492157798.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:38.909Z,1492157798.909 [NAL9602](INFO): SBD MO Status=0, MOMSN=2134, MT Status=0, MTMSN=0
2017-04-14T08:16:38.909Z,1492157798.909 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:16:39.584Z,1492157799.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:39.929Z,1492157799.929 [NAL9602](INFO): GPS fix at 20170414T081706: (36.802357, -121.787104)
2017-04-14T08:16:40.005Z,1492157800.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 1227.73, recording fix residuals...
2017-04-14T08:16:40.056Z,1492157800.056 [UniversalFixResidualReporter](INFO): Fix residual: 100.0 %DT, over the last 1227.7 m. Residual distance 1228.2 m at bearing -155.6 degrees. Fix at (36.8024, -121.7871) with 1.0 m made good.
2017-04-14T08:16:40.057Z,1492157800.057 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:16:40.057Z,1492157800.057 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:16:40.392Z,1492157800.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:40.856Z,1492157800.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:41.652Z,1492157801.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:42.449Z,1492157802.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:42.856Z,1492157802.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:43.652Z,1492157803.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:44.449Z,1492157804.449 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:45.201Z,1492157805.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:45.570Z,1492157805.570 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0168.lzma
2017-04-14T08:16:45.997Z,1492157805.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:46.346Z,1492157806.346 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0168.lzma.bak
2017-04-14T08:16:46.346Z,1492157806.346 [DataOverHttps](INFO): SBD MOMSN=4885525
2017-04-14T08:16:46.792Z,1492157806.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:47.204Z,1492157807.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:47.000Z,1492157808.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:48.740Z,1492157808.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:49.536Z,1492157809.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:50.332Z,1492157810.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:50.706Z,1492157810.706 [NAL9602](INFO): Powering down
2017-04-14T08:16:50.736Z,1492157810.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:51.533Z,1492157811.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:52.328Z,1492157812.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:52.732Z,1492157812.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:53.528Z,1492157813.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:54.324Z,1492157814.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:54.758Z,1492157814.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:55.552Z,1492157815.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:56.349Z,1492157816.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:56.837Z,1492157816.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:57.304Z,1492157817.304 [DataOverHttps](INFO): Sending 176 bytes from file Logs/20170414T032153/Express0169.lzma
2017-04-14T08:16:57.632Z,1492157817.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:58.038Z,1492157818.038 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0169.lzma.bak
2017-04-14T08:16:58.038Z,1492157818.038 [DataOverHttps](INFO): SBD MOMSN=4885528
2017-04-14T08:16:58.466Z,1492157818.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:58.558Z,1492157818.558 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:16:58.558Z,1492157818.558 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:16:58.558Z,1492157818.558 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:16:59.148Z,1492157819.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:16:59.945Z,1492157819.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:00.740Z,1492157820.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:01.168Z,1492157821.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:01.965Z,1492157821.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:02.712Z,1492157822.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:03.508Z,1492157823.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:04.304Z,1492157824.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:04.708Z,1492157824.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:05.504Z,1492157825.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:06.300Z,1492157826.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:06.704Z,1492157826.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:07.500Z,1492157827.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:08.118Z,1492157828.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:08.296Z,1492157828.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:08.518Z,1492157828.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:08.724Z,1492157828.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:08.909Z,1492157828.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:09.309Z,1492157829.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:09.520Z,1492157829.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:09.709Z,1492157829.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:10.120Z,1492157830.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:10.318Z,1492157830.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:10.509Z,1492157830.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:10.784Z,1492157830.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:10.909Z,1492157830.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:11.309Z,1492157831.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:11.580Z,1492157831.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:11.715Z,1492157831.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:12.119Z,1492157832.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:12.376Z,1492157832.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:12.516Z,1492157832.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:12.924Z,1492157832.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:13.132Z,1492157833.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:13.312Z,1492157833.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:13.726Z,1492157833.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:13.929Z,1492157833.929 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:14.146Z,1492157834.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:14.517Z,1492157834.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:14.725Z,1492157834.725 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:14.942Z,1492157834.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:15.134Z,1492157835.134 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:15.322Z,1492157835.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:15.721Z,1492157835.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:15.928Z,1492157835.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:16.121Z,1492157836.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:16.514Z,1492157836.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:16.688Z,1492157836.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:16.917Z,1492157836.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:17.323Z,1492157837.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:17.484Z,1492157837.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:17.726Z,1492157837.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:18.164Z,1492157838.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:18.280Z,1492157838.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:18.509Z,1492157838.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:18.712Z,1492157838.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:18.924Z,1492157838.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:19.334Z,1492157839.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:19.508Z,1492157839.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:19.750Z,1492157839.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:20.120Z,1492157840.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:20.304Z,1492157840.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:20.520Z,1492157840.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:20.709Z,1492157840.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:20.923Z,1492157840.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:21.317Z,1492157841.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:21.505Z,1492157841.505 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:21.722Z,1492157841.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:22.112Z,1492157842.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:22.300Z,1492157842.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:22.521Z,1492157842.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:22.708Z,1492157842.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:22.914Z,1492157842.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:23.310Z,1492157843.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:23.504Z,1492157843.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:23.713Z,1492157843.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:24.113Z,1492157844.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:24.302Z,1492157844.302 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:24.514Z,1492157844.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:24.764Z,1492157844.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:24.910Z,1492157844.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:25.315Z,1492157845.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:25.560Z,1492157845.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:25.716Z,1492157845.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:26.117Z,1492157846.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:26.358Z,1492157846.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:26.522Z,1492157846.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:26.909Z,1492157846.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:27.112Z,1492157847.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:27.313Z,1492157847.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:27.709Z,1492157847.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:27.908Z,1492157847.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:28.113Z,1492157848.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:28.509Z,1492157848.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:28.704Z,1492157848.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:28.909Z,1492157848.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:29.108Z,1492157849.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:29.309Z,1492157849.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:29.709Z,1492157849.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:29.905Z,1492157849.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:30.113Z,1492157850.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:30.513Z,1492157850.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:30.676Z,1492157850.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:30.946Z,1492157850.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:31.330Z,1492157851.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:31.472Z,1492157851.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:31.709Z,1492157851.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:32.125Z,1492157852.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:32.268Z,1492157852.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:32.513Z,1492157852.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:32.672Z,1492157852.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:32.921Z,1492157852.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:33.317Z,1492157853.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:33.468Z,1492157853.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:33.717Z,1492157853.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:34.125Z,1492157854.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:34.264Z,1492157854.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:34.521Z,1492157854.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:34.676Z,1492157854.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:34.954Z,1492157854.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:35.317Z,1492157855.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:35.472Z,1492157855.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:35.725Z,1492157855.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:36.125Z,1492157856.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:36.268Z,1492157856.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:36.542Z,1492157856.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:36.681Z,1492157856.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:36.922Z,1492157856.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:37.315Z,1492157857.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:37.476Z,1492157857.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:37.721Z,1492157857.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:38.117Z,1492157858.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:38.276Z,1492157858.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:38.521Z,1492157858.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:38.740Z,1492157858.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:38.918Z,1492157858.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:39.317Z,1492157859.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:39.536Z,1492157859.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:39.721Z,1492157859.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:40.109Z,1492157860.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:40.332Z,1492157860.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:40.509Z,1492157860.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:40.914Z,1492157860.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:41.096Z,1492157861.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:41.314Z,1492157861.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:41.719Z,1492157861.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:41.892Z,1492157861.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:42.118Z,1492157862.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:42.517Z,1492157862.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:42.689Z,1492157862.689 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:42.929Z,1492157862.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:43.096Z,1492157863.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:43.317Z,1492157863.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:43.709Z,1492157863.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:43.893Z,1492157863.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:44.118Z,1492157864.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:44.509Z,1492157864.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:44.704Z,1492157864.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:44.926Z,1492157864.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:45.108Z,1492157865.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:45.324Z,1492157865.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:45.731Z,1492157865.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:45.904Z,1492157865.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:46.117Z,1492157866.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:46.512Z,1492157866.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:46.680Z,1492157866.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:46.909Z,1492157866.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:47.329Z,1492157867.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:47.477Z,1492157867.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:47.744Z,1492157867.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:48.130Z,1492157868.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:48.272Z,1492157868.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:48.530Z,1492157868.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:48.676Z,1492157868.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:48.925Z,1492157868.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:49.313Z,1492157869.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:49.473Z,1492157869.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:49.709Z,1492157869.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:50.113Z,1492157870.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:50.268Z,1492157870.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:50.521Z,1492157870.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:50.673Z,1492157870.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:50.921Z,1492157870.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:51.356Z,1492157871.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:51.468Z,1492157871.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:51.718Z,1492157871.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:52.126Z,1492157872.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:52.267Z,1492157872.267 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:52.543Z,1492157872.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:52.728Z,1492157872.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:52.958Z,1492157872.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:53.319Z,1492157873.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:53.524Z,1492157873.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:53.719Z,1492157873.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:54.112Z,1492157874.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:54.320Z,1492157874.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:54.521Z,1492157874.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:54.929Z,1492157874.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:55.092Z,1492157875.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:55.317Z,1492157875.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:55.717Z,1492157875.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:55.888Z,1492157875.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:56.112Z,1492157876.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:56.536Z,1492157876.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:56.684Z,1492157876.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:56.930Z,1492157876.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:57.140Z,1492157877.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:57.316Z,1492157877.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:57.707Z,1492157877.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:57.936Z,1492157877.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:58.109Z,1492157878.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:58.509Z,1492157878.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:58.652Z,1492157878.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:58.910Z,1492157878.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:17:59.448Z,1492157879.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:00.244Z,1492157880.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:00.649Z,1492157880.649 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:01.444Z,1492157881.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:02.246Z,1492157882.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:02.673Z,1492157882.673 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:03.468Z,1492157883.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:03.514Z,1492157883.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:03.588Z,1492157883.588 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:18:03.588Z,1492157883.588 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:18:03.588Z,1492157883.588 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:18:03.615Z,1492157883.615 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:18:03.697Z,1492157883.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:03.751Z,1492157883.751 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:18:03.751Z,1492157883.751 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:18:04.053Z,1492157884.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:04.222Z,1492157884.222 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:18:04.222Z,1492157884.223 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:18:04.223Z,1492157884.223 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:18:04.264Z,1492157884.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:04.465Z,1492157884.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:04.672Z,1492157884.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:04.862Z,1492157884.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:05.269Z,1492157885.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:05.468Z,1492157885.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:05.673Z,1492157885.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:06.066Z,1492157886.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:06.266Z,1492157886.266 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:06.461Z,1492157886.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:06.696Z,1492157886.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:06.864Z,1492157886.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:07.266Z,1492157887.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:07.492Z,1492157887.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:07.662Z,1492157887.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:08.053Z,1492157888.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:08.288Z,1492157888.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:08.464Z,1492157888.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:08.855Z,1492157888.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:09.048Z,1492157889.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:09.254Z,1492157889.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:09.669Z,1492157889.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:09.846Z,1492157889.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:10.053Z,1492157890.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:10.450Z,1492157890.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:10.640Z,1492157890.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:10.887Z,1492157890.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:11.049Z,1492157891.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:11.323Z,1492157891.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:11.680Z,1492157891.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:11.844Z,1492157891.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:12.074Z,1492157892.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:12.480Z,1492157892.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:12.640Z,1492157892.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:12.871Z,1492157892.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:13.044Z,1492157893.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:13.262Z,1492157893.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:13.663Z,1492157893.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:13.840Z,1492157893.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:14.070Z,1492157894.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:14.478Z,1492157894.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:14.620Z,1492157894.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:14.871Z,1492157894.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:15.255Z,1492157895.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:15.416Z,1492157895.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:15.665Z,1492157895.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:16.053Z,1492157896.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:16.212Z,1492157896.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:16.497Z,1492157896.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:16.616Z,1492157896.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:16.855Z,1492157896.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:17.260Z,1492157897.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:17.412Z,1492157897.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:17.665Z,1492157897.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:18.065Z,1492157898.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:18.208Z,1492157898.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:18.453Z,1492157898.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:18.616Z,1492157898.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:18.870Z,1492157898.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:19.257Z,1492157899.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:19.413Z,1492157899.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:19.661Z,1492157899.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:20.060Z,1492157900.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:20.216Z,1492157900.217 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:20.454Z,1492157900.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:20.740Z,1492157900.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:20.853Z,1492157900.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:21.257Z,1492157901.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:21.536Z,1492157901.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:21.659Z,1492157901.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:22.054Z,1492157902.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:22.332Z,1492157902.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:22.457Z,1492157902.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:22.865Z,1492157902.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:23.040Z,1492157903.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:23.264Z,1492157903.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:23.668Z,1492157903.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:23.836Z,1492157903.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:24.062Z,1492157904.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:24.459Z,1492157904.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:24.632Z,1492157904.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:24.865Z,1492157904.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:25.048Z,1492157905.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:25.263Z,1492157905.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:25.662Z,1492157905.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:25.846Z,1492157905.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:26.059Z,1492157906.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:26.453Z,1492157906.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:26.641Z,1492157906.641 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:26.880Z,1492157906.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:27.044Z,1492157907.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:27.253Z,1492157907.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:27.653Z,1492157907.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:27.840Z,1492157907.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:28.061Z,1492157908.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:28.453Z,1492157908.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:28.612Z,1492157908.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:28.853Z,1492157908.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:29.261Z,1492157909.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:29.408Z,1492157909.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:29.665Z,1492157909.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:30.065Z,1492157910.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:30.204Z,1492157910.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:30.474Z,1492157910.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:30.620Z,1492157910.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:30.853Z,1492157910.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:31.307Z,1492157911.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:31.416Z,1492157911.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:31.678Z,1492157911.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:32.057Z,1492157912.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:32.220Z,1492157912.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:32.463Z,1492157912.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:32.624Z,1492157912.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:32.863Z,1492157912.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:33.263Z,1492157913.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:33.420Z,1492157913.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:33.663Z,1492157913.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:34.063Z,1492157914.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:34.218Z,1492157914.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:34.462Z,1492157914.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:34.728Z,1492157914.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:34.885Z,1492157914.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:35.264Z,1492157915.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:35.524Z,1492157915.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:35.653Z,1492157915.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:36.067Z,1492157916.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:36.320Z,1492157916.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:36.481Z,1492157916.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:36.861Z,1492157916.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:37.056Z,1492157917.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:37.261Z,1492157917.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:37.661Z,1492157917.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:37.854Z,1492157917.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:38.065Z,1492157918.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:38.462Z,1492157918.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:38.648Z,1492157918.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:38.863Z,1492157918.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:39.064Z,1492157919.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:39.264Z,1492157919.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:39.653Z,1492157919.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:39.860Z,1492157919.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:40.053Z,1492157920.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:40.457Z,1492157920.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:40.585Z,1492157920.585 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:40.853Z,1492157920.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:41.253Z,1492157921.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:41.650Z,1492157921.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:42.053Z,1492157922.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:42.462Z,1492157922.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:42.863Z,1492157922.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:43.253Z,1492157923.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:43.655Z,1492157923.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:44.086Z,1492157924.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:44.462Z,1492157924.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:44.865Z,1492157924.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:45.262Z,1492157925.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:45.669Z,1492157925.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:46.142Z,1492157926.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:46.459Z,1492157926.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:46.859Z,1492157926.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:47.264Z,1492157927.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:47.660Z,1492157927.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:48.063Z,1492157928.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:48.453Z,1492157928.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:48.853Z,1492157928.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:49.250Z,1492157929.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:49.657Z,1492157929.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:50.053Z,1492157930.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:50.453Z,1492157930.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:50.866Z,1492157930.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:51.260Z,1492157931.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:51.662Z,1492157931.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:52.056Z,1492157932.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:52.453Z,1492157932.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:52.858Z,1492157932.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:53.258Z,1492157933.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:53.660Z,1492157933.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:54.109Z,1492157934.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:54.453Z,1492157934.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:54.853Z,1492157934.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:55.250Z,1492157935.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:55.661Z,1492157935.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:56.117Z,1492157936.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:56.459Z,1492157936.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:56.869Z,1492157936.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:57.275Z,1492157937.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:57.656Z,1492157937.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:58.131Z,1492157938.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:58.473Z,1492157938.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:58.859Z,1492157938.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:18:59.313Z,1492157939.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:04.774Z,1492157944.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:04.977Z,1492157944.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:05.383Z,1492157945.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:05.775Z,1492157945.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:06.175Z,1492157946.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:06.650Z,1492157946.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:06.968Z,1492157946.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:07.364Z,1492157947.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:07.769Z,1492157947.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:08.183Z,1492157948.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:08.561Z,1492157948.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:08.963Z,1492157948.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:09.361Z,1492157949.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:09.757Z,1492157949.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:10.175Z,1492157950.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:10.181Z,1492157950.181 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T08:19:10.570Z,1492157950.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:10.966Z,1492157950.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:11.368Z,1492157951.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:11.772Z,1492157951.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:12.176Z,1492157952.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:12.571Z,1492157952.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:12.975Z,1492157952.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:13.400Z,1492157953.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:13.784Z,1492157953.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:14.176Z,1492157954.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:14.558Z,1492157954.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:14.966Z,1492157954.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:15.397Z,1492157955.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:15.769Z,1492157955.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:16.225Z,1492157956.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:16.570Z,1492157956.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:16.966Z,1492157956.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:17.371Z,1492157957.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:17.774Z,1492157957.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:18.182Z,1492157958.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:18.580Z,1492157958.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:18.968Z,1492157958.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:19.373Z,1492157959.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:19.761Z,1492157959.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:20.164Z,1492157960.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:20.559Z,1492157960.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:20.963Z,1492157960.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:21.365Z,1492157961.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:21.762Z,1492157961.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:22.187Z,1492157962.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:22.568Z,1492157962.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:22.968Z,1492157962.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:23.370Z,1492157963.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:23.765Z,1492157963.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:24.165Z,1492157964.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:24.566Z,1492157964.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:24.992Z,1492157964.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:25.369Z,1492157965.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:25.778Z,1492157965.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:26.222Z,1492157966.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:26.557Z,1492157966.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:26.993Z,1492157966.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:27.369Z,1492157967.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:27.765Z,1492157967.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:28.173Z,1492157968.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:28.569Z,1492157968.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:28.968Z,1492157968.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:29.373Z,1492157969.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:29.757Z,1492157969.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:30.186Z,1492157970.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:30.569Z,1492157970.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:30.961Z,1492157970.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:31.359Z,1492157971.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:31.764Z,1492157971.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:32.163Z,1492157972.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:32.579Z,1492157972.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:32.962Z,1492157972.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:33.394Z,1492157973.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:33.767Z,1492157973.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:34.163Z,1492157974.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:34.579Z,1492157974.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:34.959Z,1492157974.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:35.362Z,1492157975.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:35.776Z,1492157975.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:36.162Z,1492157976.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:36.557Z,1492157976.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:36.961Z,1492157976.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:37.367Z,1492157977.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:37.767Z,1492157977.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:38.184Z,1492157978.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:38.565Z,1492157978.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:38.962Z,1492157978.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:39.413Z,1492157979.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:39.765Z,1492157979.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:40.168Z,1492157980.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:40.563Z,1492157980.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:40.965Z,1492157980.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:41.368Z,1492157981.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:41.773Z,1492157981.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:42.157Z,1492157982.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:42.557Z,1492157982.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:42.959Z,1492157982.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:43.360Z,1492157983.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:43.765Z,1492157983.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:44.166Z,1492157984.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:44.557Z,1492157984.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:44.957Z,1492157984.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:45.361Z,1492157985.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:45.757Z,1492157985.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:46.157Z,1492157986.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:46.557Z,1492157986.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:46.959Z,1492157986.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:47.357Z,1492157987.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:47.759Z,1492157987.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:48.167Z,1492157988.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:48.574Z,1492157988.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:48.973Z,1492157988.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:49.363Z,1492157989.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:49.765Z,1492157989.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:50.175Z,1492157990.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:50.591Z,1492157990.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:50.957Z,1492157990.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:51.224Z,1492157991.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:51.359Z,1492157991.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:51.757Z,1492157991.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:52.020Z,1492157992.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:52.162Z,1492157992.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:52.436Z,1492157992.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:52.559Z,1492157992.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:52.965Z,1492157992.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:53.232Z,1492157993.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:53.408Z,1492157993.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:53.764Z,1492157993.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:54.028Z,1492157994.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:54.172Z,1492157994.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:54.448Z,1492157994.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:54.559Z,1492157994.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:54.963Z,1492157994.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:55.244Z,1492157995.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:55.381Z,1492157995.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:55.766Z,1492157995.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:56.042Z,1492157996.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:56.175Z,1492157996.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:56.448Z,1492157996.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:56.564Z,1492157996.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:56.968Z,1492157996.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:57.244Z,1492157997.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:57.369Z,1492157997.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:57.760Z,1492157997.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:58.044Z,1492157998.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:58.158Z,1492157998.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:58.524Z,1492157998.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:58.557Z,1492157998.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:58.971Z,1492157998.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:59.320Z,1492157999.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:19:59.358Z,1492157999.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:00.117Z,1492158000.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:00.884Z,1492158000.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:01.688Z,1492158001.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:02.488Z,1492158002.487 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:02.912Z,1492158002.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:03.708Z,1492158003.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:04.047Z,1492158004.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:04.238Z,1492158004.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:04.416Z,1492158004.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:04.617Z,1492158004.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:05.014Z,1492158005.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:05.212Z,1492158005.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:05.413Z,1492158005.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:05.814Z,1492158005.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:06.009Z,1492158006.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:06.212Z,1492158006.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:06.413Z,1492158006.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:06.609Z,1492158006.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:07.009Z,1492158007.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:07.208Z,1492158007.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:07.413Z,1492158007.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:07.813Z,1492158007.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:08.004Z,1492158008.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:08.209Z,1492158008.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:08.408Z,1492158008.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:08.613Z,1492158008.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:09.009Z,1492158009.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:09.204Z,1492158009.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:09.412Z,1492158009.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:09.809Z,1492158009.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:10.000Z,1492158010.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:10.218Z,1492158010.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:10.404Z,1492158010.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:10.616Z,1492158010.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:11.016Z,1492158011.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:11.201Z,1492158011.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:11.417Z,1492158011.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:11.817Z,1492158011.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:11.996Z,1492158011.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:12.215Z,1492158012.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:12.496Z,1492158012.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:12.622Z,1492158012.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:13.025Z,1492158013.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:13.292Z,1492158013.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:13.410Z,1492158013.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:13.810Z,1492158013.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:14.089Z,1492158014.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:14.213Z,1492158014.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:14.610Z,1492158014.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:14.837Z,1492158014.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:15.010Z,1492158015.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:15.424Z,1492158015.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:15.632Z,1492158015.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:15.827Z,1492158015.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:16.209Z,1492158016.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:16.428Z,1492158016.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:16.614Z,1492158016.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:16.832Z,1492158016.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:17.017Z,1492158017.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:17.421Z,1492158017.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:17.628Z,1492158017.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:17.821Z,1492158017.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:18.211Z,1492158018.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:18.412Z,1492158018.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:18.617Z,1492158018.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:19.018Z,1492158019.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:19.209Z,1492158019.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:19.421Z,1492158019.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:19.821Z,1492158019.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:20.004Z,1492158020.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:20.210Z,1492158020.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:20.416Z,1492158020.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:20.613Z,1492158020.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:21.009Z,1492158021.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:21.212Z,1492158021.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:21.409Z,1492158021.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:21.817Z,1492158021.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:22.008Z,1492158022.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:22.226Z,1492158022.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:22.412Z,1492158022.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:22.618Z,1492158022.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:23.012Z,1492158023.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:23.209Z,1492158023.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:23.417Z,1492158023.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:23.809Z,1492158023.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:24.004Z,1492158024.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:24.225Z,1492158024.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:24.408Z,1492158024.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:24.621Z,1492158024.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:25.016Z,1492158025.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:25.204Z,1492158025.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:25.413Z,1492158025.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:25.824Z,1492158025.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:26.002Z,1492158026.002 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:26.229Z,1492158026.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:26.476Z,1492158026.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:26.607Z,1492158026.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:27.009Z,1492158027.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:27.274Z,1492158027.274 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:27.413Z,1492158027.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:27.813Z,1492158027.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:28.068Z,1492158028.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:28.221Z,1492158028.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:28.609Z,1492158028.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:28.816Z,1492158028.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:29.009Z,1492158029.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:29.409Z,1492158029.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:29.612Z,1492158029.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:29.813Z,1492158029.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:30.218Z,1492158030.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:30.408Z,1492158030.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:30.609Z,1492158030.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:30.828Z,1492158030.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:31.024Z,1492158031.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:31.409Z,1492158031.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:31.809Z,1492158031.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:32.217Z,1492158032.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:32.616Z,1492158032.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:33.016Z,1492158033.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:33.417Z,1492158033.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:33.829Z,1492158033.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:34.221Z,1492158034.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:34.617Z,1492158034.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:35.017Z,1492158035.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:35.418Z,1492158035.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:35.809Z,1492158035.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:36.209Z,1492158036.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:36.613Z,1492158036.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:37.016Z,1492158037.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:37.196Z,1492158037.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:37.410Z,1492158037.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:37.836Z,1492158037.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:37.992Z,1492158037.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:38.211Z,1492158038.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:38.444Z,1492158038.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:38.609Z,1492158038.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:39.015Z,1492158039.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:39.240Z,1492158039.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:39.409Z,1492158039.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:39.809Z,1492158039.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:40.036Z,1492158040.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:40.209Z,1492158040.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:40.496Z,1492158040.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:40.609Z,1492158040.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:41.009Z,1492158041.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:41.293Z,1492158041.293 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:41.409Z,1492158041.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:41.809Z,1492158041.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:42.088Z,1492158042.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:42.213Z,1492158042.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:42.617Z,1492158042.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:42.804Z,1492158042.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:43.016Z,1492158043.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:43.416Z,1492158043.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:43.601Z,1492158043.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:43.812Z,1492158043.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:44.221Z,1492158044.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:44.396Z,1492158044.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:44.618Z,1492158044.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:44.801Z,1492158044.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:45.017Z,1492158045.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:45.435Z,1492158045.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:45.600Z,1492158045.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:45.817Z,1492158045.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:46.230Z,1492158046.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:46.384Z,1492158046.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:46.609Z,1492158046.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:47.013Z,1492158047.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:47.180Z,1492158047.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:47.409Z,1492158047.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:47.813Z,1492158047.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:47.976Z,1492158047.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:48.212Z,1492158048.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:48.456Z,1492158048.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:48.624Z,1492158048.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:49.018Z,1492158049.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:49.252Z,1492158049.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:49.410Z,1492158049.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:49.815Z,1492158049.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:50.048Z,1492158050.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:50.226Z,1492158050.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:50.452Z,1492158050.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:50.617Z,1492158050.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:51.017Z,1492158051.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:51.248Z,1492158051.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:51.412Z,1492158051.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:51.810Z,1492158051.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:52.044Z,1492158052.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:52.210Z,1492158052.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:52.448Z,1492158052.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:52.617Z,1492158052.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:53.014Z,1492158053.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:53.245Z,1492158053.245 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:53.418Z,1492158053.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:53.826Z,1492158053.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:54.040Z,1492158054.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:54.225Z,1492158054.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:54.464Z,1492158054.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:54.611Z,1492158054.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:55.011Z,1492158055.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:55.260Z,1492158055.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:55.415Z,1492158055.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:55.821Z,1492158055.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:56.056Z,1492158056.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:56.241Z,1492158056.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:56.627Z,1492158056.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:56.852Z,1492158056.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:57.012Z,1492158057.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:57.256Z,1492158057.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:57.418Z,1492158057.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:57.817Z,1492158057.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:58.052Z,1492158058.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:58.230Z,1492158058.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:58.617Z,1492158058.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:58.836Z,1492158058.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:59.024Z,1492158059.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:59.421Z,1492158059.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:20:59.632Z,1492158059.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:00.344Z,1492158060.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:01.140Z,1492158061.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:01.936Z,1492158061.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:02.375Z,1492158062.375 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:03.095Z,1492158063.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:03.172Z,1492158063.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:03.297Z,1492158063.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:03.692Z,1492158063.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:03.970Z,1492158063.970 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:04.128Z,1492158064.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:04.380Z,1492158064.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:04.479Z,1492158064.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:04.550Z,1492158064.550 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:21:04.550Z,1492158064.550 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:21:04.550Z,1492158064.550 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:21:04.596Z,1492158064.596 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:21:04.874Z,1492158064.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:05.009Z,1492158065.009 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:21:05.009Z,1492158065.009 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:21:05.186Z,1492158065.186 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:05.273Z,1492158065.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:05.364Z,1492158065.364 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:21:05.364Z,1492158065.364 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:21:05.365Z,1492158065.365 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:21:05.673Z,1492158065.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:05.980Z,1492158065.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:06.085Z,1492158066.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:06.385Z,1492158066.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:06.485Z,1492158066.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:06.881Z,1492158066.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:07.180Z,1492158067.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:07.282Z,1492158067.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:07.678Z,1492158067.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:07.992Z,1492158067.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:08.087Z,1492158068.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:08.424Z,1492158068.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:08.500Z,1492158068.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:08.880Z,1492158068.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:09.220Z,1492158069.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:09.285Z,1492158069.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:09.670Z,1492158069.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:10.016Z,1492158070.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:10.085Z,1492158070.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:10.482Z,1492158070.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:10.784Z,1492158070.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:10.881Z,1492158070.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:11.276Z,1492158071.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:11.580Z,1492158071.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:11.673Z,1492158071.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:12.073Z,1492158072.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:12.378Z,1492158072.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:12.478Z,1492158072.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:12.784Z,1492158072.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:12.879Z,1492158072.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:13.290Z,1492158073.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:13.580Z,1492158073.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:13.680Z,1492158073.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:14.094Z,1492158074.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:14.296Z,1492158074.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:14.480Z,1492158074.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:14.873Z,1492158074.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:15.092Z,1492158075.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:15.281Z,1492158075.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:15.674Z,1492158075.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:15.889Z,1492158075.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:16.074Z,1492158076.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:16.296Z,1492158076.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:16.482Z,1492158076.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:16.873Z,1492158076.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:17.093Z,1492158077.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:17.270Z,1492158077.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:17.677Z,1492158077.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:17.888Z,1492158077.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:18.081Z,1492158078.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:18.292Z,1492158078.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:18.480Z,1492158078.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:18.880Z,1492158078.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:19.088Z,1492158079.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:19.282Z,1492158079.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:19.680Z,1492158079.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:19.884Z,1492158079.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:20.082Z,1492158080.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:20.288Z,1492158080.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:20.482Z,1492158080.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:20.873Z,1492158080.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:21.084Z,1492158081.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:21.273Z,1492158081.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:21.673Z,1492158081.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:21.880Z,1492158081.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:22.073Z,1492158082.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:22.392Z,1492158082.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:22.477Z,1492158082.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:22.873Z,1492158082.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:23.190Z,1492158083.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:23.281Z,1492158083.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:23.673Z,1492158083.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:23.984Z,1492158083.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:24.073Z,1492158084.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:24.478Z,1492158084.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:24.728Z,1492158084.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:24.891Z,1492158084.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:25.282Z,1492158085.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:25.524Z,1492158085.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:25.673Z,1492158085.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:26.071Z,1492158086.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:26.320Z,1492158086.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:26.473Z,1492158086.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:26.732Z,1492158086.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:26.874Z,1492158086.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:27.273Z,1492158087.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:27.528Z,1492158087.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:27.696Z,1492158087.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:28.073Z,1492158088.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:28.276Z,1492158088.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:28.477Z,1492158088.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:28.897Z,1492158088.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:29.072Z,1492158089.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:29.281Z,1492158089.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:29.673Z,1492158089.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:29.868Z,1492158089.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:30.085Z,1492158090.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:30.276Z,1492158090.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:30.473Z,1492158090.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:30.881Z,1492158090.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:31.072Z,1492158091.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:31.281Z,1492158091.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:31.673Z,1492158091.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:31.868Z,1492158091.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:32.084Z,1492158092.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:32.312Z,1492158092.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:32.489Z,1492158092.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:32.947Z,1492158092.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:33.108Z,1492158093.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:33.278Z,1492158093.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:33.681Z,1492158093.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:33.904Z,1492158093.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:34.098Z,1492158094.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:34.329Z,1492158094.329 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:34.474Z,1492158094.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:34.876Z,1492158094.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:35.126Z,1492158095.126 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:35.272Z,1492158095.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:35.673Z,1492158095.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:35.923Z,1492158095.923 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:36.098Z,1492158096.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:36.368Z,1492158096.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:36.473Z,1492158096.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:36.877Z,1492158096.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:37.164Z,1492158097.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:37.281Z,1492158097.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:37.670Z,1492158097.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:37.960Z,1492158097.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:38.081Z,1492158098.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:38.489Z,1492158098.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:38.712Z,1492158098.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:38.881Z,1492158098.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:39.274Z,1492158099.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:39.509Z,1492158099.509 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:39.682Z,1492158099.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:40.078Z,1492158100.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:40.304Z,1492158100.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:40.481Z,1492158100.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:40.708Z,1492158100.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:40.891Z,1492158100.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:41.288Z,1492158101.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:41.504Z,1492158101.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:41.689Z,1492158101.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:42.083Z,1492158102.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:42.272Z,1492158102.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:42.476Z,1492158102.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:42.882Z,1492158102.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:43.070Z,1492158103.070 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:43.289Z,1492158103.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:43.683Z,1492158103.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:43.864Z,1492158103.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:44.082Z,1492158104.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:44.268Z,1492158104.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:44.479Z,1492158104.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:44.884Z,1492158104.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:45.064Z,1492158105.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:45.282Z,1492158105.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:45.686Z,1492158105.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:45.860Z,1492158105.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:46.089Z,1492158106.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:46.264Z,1492158106.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:46.473Z,1492158106.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:46.880Z,1492158106.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:47.060Z,1492158107.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:47.273Z,1492158107.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:47.681Z,1492158107.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:47.856Z,1492158107.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:48.089Z,1492158108.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:48.269Z,1492158108.269 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:48.481Z,1492158108.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:48.885Z,1492158108.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:49.066Z,1492158109.066 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:49.280Z,1492158109.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:49.682Z,1492158109.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:49.860Z,1492158109.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:50.081Z,1492158110.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:50.352Z,1492158110.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:50.486Z,1492158110.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:50.873Z,1492158110.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:51.148Z,1492158111.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:51.271Z,1492158111.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:51.674Z,1492158111.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:51.944Z,1492158111.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:52.092Z,1492158112.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:52.482Z,1492158112.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:52.740Z,1492158112.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:52.891Z,1492158112.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:53.270Z,1492158113.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:53.536Z,1492158113.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:53.690Z,1492158113.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:54.073Z,1492158114.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:54.332Z,1492158114.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:54.473Z,1492158114.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:54.736Z,1492158114.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:54.888Z,1492158114.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:55.289Z,1492158115.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:55.532Z,1492158115.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:55.673Z,1492158115.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:56.073Z,1492158116.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:56.236Z,1492158116.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:56.481Z,1492158116.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:56.877Z,1492158116.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:57.032Z,1492158117.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:57.281Z,1492158117.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:57.714Z,1492158117.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:57.837Z,1492158117.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:58.080Z,1492158118.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:58.364Z,1492158118.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:58.475Z,1492158118.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:58.880Z,1492158118.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:58.934Z,1492158118.934 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:21:58.934Z,1492158118.934 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:21:58.934Z,1492158118.934 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:21:58.934Z,1492158118.934 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:21:59.160Z,1492158119.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:59.275Z,1492158119.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:59.361Z,1492158119.361 [Default:CheckIn:D] Stopped
2017-04-14T08:21:59.361Z,1492158119.361 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:21:59.705Z,1492158119.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:21:59.847Z,1492158119.847 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 295.900716 min 
2017-04-14T08:21:59.847Z,1492158119.847 [Default:CheckIn:E] Stopped
2017-04-14T08:21:59.859Z,1492158119.859 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:21:59.859Z,1492158119.859 [Default:CheckIn] Stopped
2017-04-14T08:21:59.860Z,1492158119.860 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:21:59.860Z,1492158119.860 [Default:CheckIn](INFO): Running loop #42
2017-04-14T08:21:59.860Z,1492158119.860 [Default:CheckIn] Running Loop=42
2017-04-14T08:21:59.860Z,1492158119.860 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:21:59.860Z,1492158119.860 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:21:59.956Z,1492158119.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:00.360Z,1492158120.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:01.156Z,1492158121.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:01.960Z,1492158121.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:02.364Z,1492158122.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:03.160Z,1492158123.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:03.956Z,1492158123.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:04.360Z,1492158124.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:04.461Z,1492158124.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:04.649Z,1492158124.649 [NAL9602](INFO): Powering up
2017-04-14T08:22:04.666Z,1492158124.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:05.055Z,1492158125.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:05.156Z,1492158125.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:05.450Z,1492158125.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:05.846Z,1492158125.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:05.952Z,1492158125.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:06.292Z,1492158126.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:06.641Z,1492158126.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:06.716Z,1492158126.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:07.046Z,1492158127.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:07.454Z,1492158127.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:07.512Z,1492158127.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:07.841Z,1492158127.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:08.284Z,1492158128.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:08.308Z,1492158128.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:08.650Z,1492158128.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:08.728Z,1492158128.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:09.040Z,1492158129.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:09.442Z,1492158129.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:09.524Z,1492158129.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:09.849Z,1492158129.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:10.242Z,1492158130.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:10.248Z,1492158130.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:10.650Z,1492158130.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:11.044Z,1492158131.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:11.056Z,1492158131.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:11.434Z,1492158131.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:11.838Z,1492158131.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:11.840Z,1492158131.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:12.241Z,1492158132.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:12.244Z,1492158132.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:12.641Z,1492158132.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:13.037Z,1492158133.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:13.040Z,1492158133.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:13.445Z,1492158133.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:13.837Z,1492158133.837 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:13.852Z,1492158133.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:14.249Z,1492158134.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:14.296Z,1492158134.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:14.645Z,1492158134.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:15.092Z,1492158135.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:15.114Z,1492158135.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:15.456Z,1492158135.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:15.829Z,1492158135.829 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:22:15.854Z,1492158135.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:15.892Z,1492158135.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:16.239Z,1492158136.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:16.296Z,1492158136.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:16.654Z,1492158136.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:16.685Z,1492158136.685 [PNI_TCM](ERROR): CRC does not match. Expected:0x27528 got:0x7489
2017-04-14T08:22:17.060Z,1492158137.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:17.092Z,1492158137.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:17.461Z,1492158137.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:17.888Z,1492158137.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:17.904Z,1492158137.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:18.260Z,1492158138.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:18.388Z,1492158138.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:18.666Z,1492158138.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:19.038Z,1492158139.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:19.184Z,1492158139.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:19.438Z,1492158139.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:19.837Z,1492158139.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:19.980Z,1492158139.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:20.269Z,1492158140.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:20.646Z,1492158140.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:20.704Z,1492158140.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:21.057Z,1492158141.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:21.446Z,1492158141.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:21.500Z,1492158141.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:21.876Z,1492158141.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:22.274Z,1492158142.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:22.304Z,1492158142.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:22.643Z,1492158142.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:22.712Z,1492158142.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:23.047Z,1492158143.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:23.447Z,1492158143.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:23.508Z,1492158143.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:23.853Z,1492158143.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:24.243Z,1492158144.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:24.284Z,1492158144.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:24.638Z,1492158144.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:25.072Z,1492158145.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:25.080Z,1492158145.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:25.463Z,1492158145.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:25.850Z,1492158145.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:25.876Z,1492158145.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:26.246Z,1492158146.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:26.280Z,1492158146.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:26.640Z,1492158146.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:27.046Z,1492158147.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:27.076Z,1492158147.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:27.451Z,1492158147.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:27.846Z,1492158147.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:27.872Z,1492158147.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:28.237Z,1492158148.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:28.276Z,1492158148.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:28.641Z,1492158148.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:29.072Z,1492158149.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:29.080Z,1492158149.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:29.461Z,1492158149.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:29.853Z,1492158149.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:29.868Z,1492158149.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:30.252Z,1492158150.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:30.272Z,1492158150.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:30.657Z,1492158150.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:30.726Z,1492158150.726 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:22:31.037Z,1492158151.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:31.068Z,1492158151.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:31.442Z,1492158151.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:31.466Z,1492158151.466 [PNI_TCM](ERROR): CRC does not match. Expected:0x56882 got:0x46275
2017-04-14T08:22:31.864Z,1492158151.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:31.892Z,1492158151.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:32.250Z,1492158152.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:32.348Z,1492158152.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:32.647Z,1492158152.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:33.058Z,1492158153.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:33.144Z,1492158153.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:33.448Z,1492158153.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:33.851Z,1492158153.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:33.940Z,1492158153.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:34.260Z,1492158154.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:34.658Z,1492158154.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:34.708Z,1492158154.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:35.045Z,1492158155.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:35.457Z,1492158155.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:35.504Z,1492158155.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:35.856Z,1492158155.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:36.240Z,1492158156.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:36.300Z,1492158156.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:36.646Z,1492158156.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:36.704Z,1492158156.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:37.040Z,1492158157.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:37.437Z,1492158157.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:37.508Z,1492158157.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:37.875Z,1492158157.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:38.176Z,1492158158.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:38.256Z,1492158158.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:38.641Z,1492158158.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:38.972Z,1492158158.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:39.050Z,1492158159.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:39.442Z,1492158159.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:39.769Z,1492158159.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:39.859Z,1492158159.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:40.176Z,1492158160.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:40.249Z,1492158160.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:40.655Z,1492158160.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:40.973Z,1492158160.973 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:41.055Z,1492158161.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:41.451Z,1492158161.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:41.768Z,1492158161.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:41.851Z,1492158161.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:42.172Z,1492158162.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:42.253Z,1492158162.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:42.658Z,1492158162.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:42.968Z,1492158162.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:43.050Z,1492158163.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:43.438Z,1492158163.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:43.764Z,1492158163.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:43.844Z,1492158163.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:44.204Z,1492158164.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:44.317Z,1492158164.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:44.652Z,1492158164.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:45.001Z,1492158165.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:45.051Z,1492158165.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:45.445Z,1492158165.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:45.798Z,1492158165.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:45.868Z,1492158165.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:46.264Z,1492158166.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:46.340Z,1492158166.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:46.639Z,1492158166.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:47.042Z,1492158167.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:47.136Z,1492158167.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:47.449Z,1492158167.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:47.845Z,1492158167.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:47.932Z,1492158167.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:48.276Z,1492158168.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:48.612Z,1492158168.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:48.644Z,1492158168.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:49.046Z,1492158169.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:49.433Z,1492158169.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:49.446Z,1492158169.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:49.847Z,1492158169.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:50.229Z,1492158170.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:50.260Z,1492158170.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:50.636Z,1492158170.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:50.653Z,1492158170.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:51.055Z,1492158171.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:51.432Z,1492158171.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:51.449Z,1492158171.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:51.849Z,1492158171.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:52.148Z,1492158172.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:52.261Z,1492158172.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:52.641Z,1492158172.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:52.944Z,1492158172.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:53.037Z,1492158173.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:53.443Z,1492158173.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:53.741Z,1492158173.741 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:53.842Z,1492158173.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:54.144Z,1492158174.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:54.245Z,1492158174.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:54.649Z,1492158174.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:54.940Z,1492158174.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:55.075Z,1492158175.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:55.462Z,1492158175.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:55.736Z,1492158175.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:55.891Z,1492158175.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:56.168Z,1492158176.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:56.247Z,1492158176.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:56.683Z,1492158176.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:56.964Z,1492158176.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:57.046Z,1492158177.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:57.450Z,1492158177.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:57.760Z,1492158177.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:57.840Z,1492158177.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:58.164Z,1492158178.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:58.250Z,1492158178.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:58.705Z,1492158178.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:58.961Z,1492158178.961 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:59.041Z,1492158179.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:59.443Z,1492158179.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:59.758Z,1492158179.758 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:22:59.874Z,1492158179.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:00.364Z,1492158180.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:01.161Z,1492158181.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:01.956Z,1492158181.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:02.624Z,1492158182.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:03.420Z,1492158183.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:03.570Z,1492158183.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:03.762Z,1492158183.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:04.201Z,1492158184.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:04.208Z,1492158184.208 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T08:23:04.216Z,1492158184.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:04.535Z,1492158184.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:04.632Z,1492158184.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:04.935Z,1492158184.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:05.334Z,1492158185.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:05.428Z,1492158185.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:05.748Z,1492158185.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:06.134Z,1492158186.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:06.216Z,1492158186.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:06.532Z,1492158186.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:06.938Z,1492158186.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:07.012Z,1492158187.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:07.326Z,1492158187.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:07.757Z,1492158187.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:07.808Z,1492158187.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:08.129Z,1492158188.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:08.212Z,1492158188.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:08.525Z,1492158188.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:08.925Z,1492158188.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:09.008Z,1492158189.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:09.333Z,1492158189.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:09.774Z,1492158189.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:09.804Z,1492158189.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:10.153Z,1492158190.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:10.208Z,1492158190.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:10.533Z,1492158190.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:10.937Z,1492158190.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:11.004Z,1492158191.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:11.337Z,1492158191.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:11.748Z,1492158191.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:11.800Z,1492158191.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:12.139Z,1492158192.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:12.204Z,1492158192.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:12.527Z,1492158192.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:12.925Z,1492158192.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:12.000Z,1492158193.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:13.360Z,1492158193.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:13.733Z,1492158193.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:13.800Z,1492158193.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:14.144Z,1492158194.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:14.288Z,1492158194.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:14.547Z,1492158194.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:14.933Z,1492158194.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:15.084Z,1492158195.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:15.325Z,1492158195.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:15.761Z,1492158195.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:15.880Z,1492158195.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:16.207Z,1492158196.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:16.550Z,1492158196.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:16.676Z,1492158196.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:16.977Z,1492158196.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:17.084Z,1492158197.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:17.342Z,1492158197.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:17.734Z,1492158197.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:17.880Z,1492158197.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:18.210Z,1492158198.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:18.538Z,1492158198.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:18.676Z,1492158198.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:18.948Z,1492158198.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:19.080Z,1492158199.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:19.329Z,1492158199.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:19.731Z,1492158199.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:19.877Z,1492158199.877 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:20.125Z,1492158200.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:20.311Z,1492158200.311 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:20.553Z,1492158200.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:20.951Z,1492158200.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:21.108Z,1492158201.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:21.370Z,1492158201.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:21.754Z,1492158201.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:21.904Z,1492158201.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:22.148Z,1492158202.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:22.308Z,1492158202.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:22.534Z,1492158202.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:22.937Z,1492158202.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:23.104Z,1492158203.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:23.334Z,1492158203.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:23.736Z,1492158203.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:23.900Z,1492158203.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:24.146Z,1492158204.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:24.304Z,1492158204.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:24.539Z,1492158204.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:24.929Z,1492158204.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:25.100Z,1492158205.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:25.329Z,1492158205.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:25.750Z,1492158205.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:25.897Z,1492158205.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:26.154Z,1492158206.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:26.304Z,1492158206.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:26.556Z,1492158206.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:26.935Z,1492158206.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:27.100Z,1492158207.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:27.327Z,1492158207.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:27.809Z,1492158207.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:27.896Z,1492158207.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:28.141Z,1492158208.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:28.300Z,1492158208.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:28.552Z,1492158208.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:28.962Z,1492158208.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:29.096Z,1492158209.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:29.363Z,1492158209.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:29.741Z,1492158209.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:29.892Z,1492158209.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:30.184Z,1492158210.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:30.528Z,1492158210.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:30.639Z,1492158210.639 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:30.948Z,1492158210.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:31.351Z,1492158211.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:31.440Z,1492158211.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:31.740Z,1492158211.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:32.228Z,1492158212.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:32.236Z,1492158212.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:32.536Z,1492158212.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:32.640Z,1492158212.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:32.934Z,1492158212.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:33.327Z,1492158213.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:33.436Z,1492158213.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:33.736Z,1492158213.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:34.088Z,1492158214.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:34.147Z,1492158214.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:34.538Z,1492158214.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:34.884Z,1492158214.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:34.932Z,1492158214.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:35.332Z,1492158215.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:35.680Z,1492158215.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:35.755Z,1492158215.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:36.092Z,1492158216.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:36.156Z,1492158216.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:36.543Z,1492158216.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:36.889Z,1492158216.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:36.925Z,1492158216.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:37.325Z,1492158217.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:37.685Z,1492158217.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:37.735Z,1492158217.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:38.092Z,1492158218.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:38.137Z,1492158218.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:38.533Z,1492158218.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:38.888Z,1492158218.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:38.938Z,1492158218.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:39.332Z,1492158219.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:39.684Z,1492158219.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:39.769Z,1492158219.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:40.088Z,1492158220.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:40.166Z,1492158220.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:40.530Z,1492158220.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:40.886Z,1492158220.886 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:40.933Z,1492158220.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:41.364Z,1492158221.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:41.680Z,1492158221.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:41.835Z,1492158221.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:42.132Z,1492158222.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:42.324Z,1492158222.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:42.550Z,1492158222.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:42.933Z,1492158222.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:43.122Z,1492158223.122 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:43.338Z,1492158223.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:43.744Z,1492158223.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:43.916Z,1492158223.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:44.148Z,1492158224.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:44.525Z,1492158224.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:44.576Z,1492158224.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:44.951Z,1492158224.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:44.957Z,1492158224.957 [PNI_TCM](ERROR): CRC does not match. Expected:0x25937 got:0x10660
2017-04-14T08:23:45.335Z,1492158225.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:45.372Z,1492158225.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:45.738Z,1492158225.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:46.130Z,1492158226.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:46.176Z,1492158226.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:46.532Z,1492158226.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:46.540Z,1492158226.540 [PNI_TCM](ERROR): CRC does not match. Expected:0x13759 got:0x36659
2017-04-14T08:23:46.624Z,1492158226.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:46.937Z,1492158226.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:47.337Z,1492158227.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:47.421Z,1492158227.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:47.742Z,1492158227.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:48.064Z,1492158228.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:48.143Z,1492158228.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:48.556Z,1492158228.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:48.860Z,1492158228.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:48.935Z,1492158228.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:49.328Z,1492158229.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:49.656Z,1492158229.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:49.740Z,1492158229.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:50.072Z,1492158230.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:50.137Z,1492158230.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:50.532Z,1492158230.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:50.868Z,1492158230.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:50.940Z,1492158230.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:51.342Z,1492158231.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:51.664Z,1492158231.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:51.733Z,1492158231.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:52.076Z,1492158232.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:52.139Z,1492158232.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:52.555Z,1492158232.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:52.872Z,1492158232.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:52.959Z,1492158232.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:53.332Z,1492158233.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:53.668Z,1492158233.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:53.733Z,1492158233.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:54.127Z,1492158234.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:54.188Z,1492158234.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:54.542Z,1492158234.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:54.938Z,1492158234.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:54.996Z,1492158234.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:55.332Z,1492158235.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:55.771Z,1492158235.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:55.792Z,1492158235.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:56.140Z,1492158236.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:56.240Z,1492158236.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:56.542Z,1492158236.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:56.950Z,1492158236.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:57.036Z,1492158237.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:57.353Z,1492158237.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:57.753Z,1492158237.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:57.832Z,1492158237.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:58.160Z,1492158238.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:58.520Z,1492158238.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:58.532Z,1492158238.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:58.936Z,1492158238.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:59.316Z,1492158239.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:59.344Z,1492158239.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:23:59.735Z,1492158239.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:00.112Z,1492158240.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:00.136Z,1492158240.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:00.518Z,1492158240.518 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:01.312Z,1492158241.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:02.056Z,1492158242.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:02.852Z,1492158242.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:03.648Z,1492158243.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:04.080Z,1492158244.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:04.451Z,1492158244.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:04.708Z,1492158244.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:04.876Z,1492158244.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:05.069Z,1492158245.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:05.493Z,1492158245.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:05.517Z,1492158245.517 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:24:05.518Z,1492158245.518 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T08:24:05.518Z,1492158245.518 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:24:05.580Z,1492158245.580 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:24:05.672Z,1492158245.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:05.900Z,1492158245.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:05.990Z,1492158245.990 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:24:05.990Z,1492158245.990 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T08:24:06.076Z,1492158246.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:06.279Z,1492158246.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:06.303Z,1492158246.303 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:24:06.303Z,1492158246.303 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:24:06.304Z,1492158246.304 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:24:06.661Z,1492158246.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:06.872Z,1492158246.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:07.061Z,1492158247.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:07.461Z,1492158247.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:07.668Z,1492158247.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:07.861Z,1492158247.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:08.073Z,1492158248.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:08.265Z,1492158248.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:08.667Z,1492158248.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:08.868Z,1492158248.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:09.061Z,1492158249.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:09.459Z,1492158249.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:09.670Z,1492158249.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:09.861Z,1492158249.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:10.136Z,1492158250.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:10.267Z,1492158250.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:10.663Z,1492158250.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:10.932Z,1492158250.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:11.065Z,1492158251.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:11.480Z,1492158251.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:11.728Z,1492158251.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:11.867Z,1492158251.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:12.306Z,1492158252.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:12.482Z,1492158252.482 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:12.671Z,1492158252.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:13.072Z,1492158253.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:13.276Z,1492158253.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:13.473Z,1492158253.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:13.861Z,1492158253.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:14.073Z,1492158254.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:14.276Z,1492158254.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:14.480Z,1492158254.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:14.680Z,1492158254.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:15.067Z,1492158255.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:15.276Z,1492158255.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:15.467Z,1492158255.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:15.866Z,1492158255.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:16.052Z,1492158256.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:16.270Z,1492158256.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:16.663Z,1492158256.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:16.848Z,1492158256.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:17.068Z,1492158257.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:17.470Z,1492158257.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:17.644Z,1492158257.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:17.890Z,1492158257.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:18.090Z,1492158258.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:18.304Z,1492158258.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:18.672Z,1492158258.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:18.884Z,1492158258.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:19.063Z,1492158259.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:19.470Z,1492158259.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:19.680Z,1492158259.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:19.865Z,1492158259.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:20.084Z,1492158260.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:20.275Z,1492158260.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:20.669Z,1492158260.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:20.880Z,1492158260.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:21.074Z,1492158261.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:21.461Z,1492158261.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:21.678Z,1492158261.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:21.861Z,1492158261.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:22.084Z,1492158262.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:22.261Z,1492158262.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:22.684Z,1492158262.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:22.881Z,1492158262.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:23.092Z,1492158263.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:23.488Z,1492158263.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:23.678Z,1492158263.678 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:23.898Z,1492158263.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:24.116Z,1492158264.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:24.273Z,1492158264.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:24.677Z,1492158264.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:24.912Z,1492158264.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:25.061Z,1492158265.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:25.469Z,1492158265.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:25.708Z,1492158265.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:25.863Z,1492158265.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:26.269Z,1492158266.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:26.460Z,1492158266.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:26.669Z,1492158266.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:27.072Z,1492158267.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:27.256Z,1492158267.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:27.485Z,1492158267.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:27.881Z,1492158267.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:28.052Z,1492158268.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:28.265Z,1492158268.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:28.457Z,1492158268.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:28.665Z,1492158268.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:29.065Z,1492158269.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:29.252Z,1492158269.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:29.479Z,1492158269.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:29.862Z,1492158269.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:30.040Z,1492158270.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:30.269Z,1492158270.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:30.673Z,1492158270.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:30.836Z,1492158270.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:31.065Z,1492158271.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:31.485Z,1492158271.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:31.633Z,1492158271.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:31.888Z,1492158271.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:32.037Z,1492158272.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:32.274Z,1492158272.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:32.670Z,1492158272.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:32.832Z,1492158272.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:33.071Z,1492158273.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:33.461Z,1492158273.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:33.628Z,1492158273.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:33.877Z,1492158273.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:34.084Z,1492158274.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:34.261Z,1492158274.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:34.661Z,1492158274.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:34.880Z,1492158274.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:35.096Z,1492158275.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:35.465Z,1492158275.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:35.676Z,1492158275.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:35.870Z,1492158275.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:36.100Z,1492158276.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:36.270Z,1492158276.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:36.678Z,1492158276.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:36.896Z,1492158276.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:37.061Z,1492158277.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:37.461Z,1492158277.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:37.692Z,1492158277.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:37.861Z,1492158277.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:38.096Z,1492158278.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:38.261Z,1492158278.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:38.661Z,1492158278.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:38.892Z,1492158278.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:39.061Z,1492158279.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:39.461Z,1492158279.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:39.688Z,1492158279.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:39.863Z,1492158279.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:40.278Z,1492158280.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:40.484Z,1492158280.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:40.673Z,1492158280.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:40.888Z,1492158280.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:41.062Z,1492158281.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:41.461Z,1492158281.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:41.684Z,1492158281.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:41.862Z,1492158281.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:42.271Z,1492158282.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:42.445Z,1492158282.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:42.669Z,1492158282.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:43.077Z,1492158283.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:43.240Z,1492158283.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:43.470Z,1492158283.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:43.881Z,1492158283.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:44.008Z,1492158284.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:44.292Z,1492158284.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:44.686Z,1492158284.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:44.804Z,1492158284.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:45.074Z,1492158285.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:45.472Z,1492158285.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:45.600Z,1492158285.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:45.861Z,1492158285.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:46.072Z,1492158286.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:46.261Z,1492158286.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:46.661Z,1492158286.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:46.870Z,1492158286.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:47.078Z,1492158287.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:47.465Z,1492158287.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:47.672Z,1492158287.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:47.867Z,1492158287.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:48.077Z,1492158288.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:48.266Z,1492158288.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:48.683Z,1492158288.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:48.872Z,1492158288.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:49.084Z,1492158289.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:49.470Z,1492158289.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:49.668Z,1492158289.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:49.861Z,1492158289.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:50.072Z,1492158290.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:50.272Z,1492158290.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:50.674Z,1492158290.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:50.682Z,1492158290.682 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:24:50.682Z,1492158290.682 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:24:50.682Z,1492158290.682 [BPC1](ERROR): Communications Fault
2017-04-14T08:24:50.711Z,1492158290.711 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:24:50.870Z,1492158290.870 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:51.061Z,1492158291.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:51.463Z,1492158291.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:51.664Z,1492158291.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:51.904Z,1492158291.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:51.984Z,1492158291.984 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:24:51.984Z,1492158291.984 [BPC1] No Fault, FailCount= 1
2017-04-14T08:24:52.112Z,1492158292.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:52.282Z,1492158292.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:52.668Z,1492158292.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:52.908Z,1492158292.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:53.080Z,1492158293.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:53.472Z,1492158293.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:53.705Z,1492158293.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:53.877Z,1492158293.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:54.261Z,1492158294.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:54.452Z,1492158294.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:54.665Z,1492158294.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:55.061Z,1492158295.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:55.248Z,1492158295.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:55.469Z,1492158295.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:55.868Z,1492158295.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:56.044Z,1492158296.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:56.276Z,1492158296.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:56.456Z,1492158296.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:56.676Z,1492158296.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:57.070Z,1492158297.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:57.252Z,1492158297.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:57.499Z,1492158297.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:57.879Z,1492158297.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:57.992Z,1492158297.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:58.261Z,1492158298.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:58.682Z,1492158298.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:58.788Z,1492158298.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:59.061Z,1492158299.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:59.461Z,1492158299.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:59.584Z,1492158299.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:59.882Z,1492158299.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:24:59.992Z,1492158299.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:00.261Z,1492158300.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:00.788Z,1492158300.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:01.584Z,1492158301.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:01.988Z,1492158301.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:02.784Z,1492158302.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:03.580Z,1492158303.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:03.984Z,1492158303.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:04.548Z,1492158304.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:04.717Z,1492158304.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:04.780Z,1492158304.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:05.103Z,1492158305.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:05.510Z,1492158305.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:05.578Z,1492158305.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:05.928Z,1492158305.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:06.076Z,1492158306.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:06.315Z,1492158306.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:06.694Z,1492158306.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:06.872Z,1492158306.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:07.097Z,1492158307.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:07.540Z,1492158307.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:07.680Z,1492158307.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:07.916Z,1492158307.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:08.305Z,1492158308.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:08.468Z,1492158308.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:08.744Z,1492158308.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:09.114Z,1492158309.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:09.272Z,1492158309.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:09.499Z,1492158309.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:09.894Z,1492158309.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:10.068Z,1492158310.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:10.318Z,1492158310.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:10.720Z,1492158310.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:10.864Z,1492158310.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:11.093Z,1492158311.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:11.268Z,1492158311.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:11.575Z,1492158311.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:11.905Z,1492158311.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:12.048Z,1492158312.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:12.313Z,1492158312.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:12.697Z,1492158312.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:12.844Z,1492158312.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:13.102Z,1492158313.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:13.536Z,1492158313.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:13.640Z,1492158313.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:13.900Z,1492158313.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:14.044Z,1492158314.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:14.312Z,1492158314.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:14.705Z,1492158314.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:14.840Z,1492158314.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:15.104Z,1492158315.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:15.543Z,1492158315.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:15.636Z,1492158315.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:15.909Z,1492158315.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:16.040Z,1492158316.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:16.301Z,1492158316.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:16.703Z,1492158316.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:16.836Z,1492158316.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:17.111Z,1492158317.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:17.543Z,1492158317.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:17.632Z,1492158317.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:17.902Z,1492158317.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:18.036Z,1492158318.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:18.302Z,1492158318.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:18.708Z,1492158318.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:18.832Z,1492158318.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:19.094Z,1492158319.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:19.501Z,1492158319.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:19.629Z,1492158319.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:19.893Z,1492158319.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:20.064Z,1492158320.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:20.293Z,1492158320.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:20.697Z,1492158320.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:20.860Z,1492158320.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:21.102Z,1492158321.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:21.500Z,1492158321.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:21.656Z,1492158321.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:21.948Z,1492158321.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:22.293Z,1492158322.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:22.444Z,1492158322.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:22.693Z,1492158322.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:23.110Z,1492158323.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:23.240Z,1492158323.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:23.499Z,1492158323.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:23.952Z,1492158323.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:24.036Z,1492158324.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:24.304Z,1492158324.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:24.440Z,1492158324.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:24.701Z,1492158324.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:25.101Z,1492158325.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:25.236Z,1492158325.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:25.528Z,1492158325.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:25.922Z,1492158325.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:25.956Z,1492158325.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:26.299Z,1492158326.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:26.706Z,1492158326.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:26.752Z,1492158326.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:27.106Z,1492158327.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:27.527Z,1492158327.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:27.548Z,1492158327.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:27.897Z,1492158327.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:27.953Z,1492158327.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:28.297Z,1492158328.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:28.693Z,1492158328.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:28.748Z,1492158328.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:29.124Z,1492158329.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:29.568Z,1492158329.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:29.612Z,1492158329.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:29.925Z,1492158329.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:29.972Z,1492158329.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:30.305Z,1492158330.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:30.715Z,1492158330.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:30.768Z,1492158330.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:31.097Z,1492158331.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:31.527Z,1492158331.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:31.564Z,1492158331.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:31.905Z,1492158331.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:32.044Z,1492158332.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:32.321Z,1492158332.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:32.682Z,1492158332.682 [NAL9602](INFO): SBD MO Status=0, MOMSN=2135, MT Status=0, MTMSN=0
2017-04-14T08:25:32.682Z,1492158332.682 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:25:32.714Z,1492158332.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:32.848Z,1492158332.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:33.095Z,1492158333.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:33.505Z,1492158333.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:33.644Z,1492158333.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:33.880Z,1492158333.880 [NAL9602](INFO): GPS fix at 20170414T082600: (36.802356, -121.787134)
2017-04-14T08:25:33.897Z,1492158333.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:33.942Z,1492158333.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 550.48, recording fix residuals...
2017-04-14T08:25:34.005Z,1492158334.005 [UniversalFixResidualReporter](INFO): Fix residual: 99.8 %DT, over the last 550.5 m. Residual distance 549.4 m at bearing -156.0 degrees. Fix at (36.8024, -121.7871) with 2.6 m made good.
2017-04-14T08:25:34.006Z,1492158334.006 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:25:34.006Z,1492158334.006 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:25:34.064Z,1492158334.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:34.349Z,1492158334.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:34.860Z,1492158334.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:34.909Z,1492158334.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:35.352Z,1492158335.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:35.656Z,1492158335.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:36.452Z,1492158336.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:36.856Z,1492158336.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:37.661Z,1492158337.661 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:38.432Z,1492158338.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:39.228Z,1492158339.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:40.000Z,1492158340.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:40.796Z,1492158340.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:41.592Z,1492158341.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:41.996Z,1492158341.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:42.792Z,1492158342.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:43.588Z,1492158343.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:43.897Z,1492158343.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:43.992Z,1492158343.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:44.002Z,1492158344.002 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20170414T032153/Courier0172.lzma
2017-04-14T08:25:44.042Z,1492158344.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:44.418Z,1492158344.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:44.808Z,1492158344.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:44.811Z,1492158344.811 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0172.lzma.bak
2017-04-14T08:25:44.812Z,1492158344.812 [DataOverHttps](INFO): SBD MOMSN=4885552
2017-04-14T08:25:44.838Z,1492158344.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:45.256Z,1492158345.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:45.605Z,1492158345.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:45.636Z,1492158345.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:46.008Z,1492158346.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:46.804Z,1492158346.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:47.600Z,1492158347.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:48.004Z,1492158348.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:48.810Z,1492158348.810 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:49.608Z,1492158349.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:50.381Z,1492158350.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:51.048Z,1492158351.048 [NAL9602](INFO): Powering down
2017-04-14T08:25:51.088Z,1492158351.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:51.119Z,1492158351.119 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:25:51.119Z,1492158351.119 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:25:51.119Z,1492158351.119 [BPC1](ERROR): Communications Fault
2017-04-14T08:25:51.176Z,1492158351.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:51.198Z,1492158351.198 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:25:51.249Z,1492158351.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:51.645Z,1492158351.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:51.972Z,1492158351.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:52.047Z,1492158352.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:52.108Z,1492158352.109 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:25:52.108Z,1492158352.109 [BPC1] No Fault, FailCount= 1
2017-04-14T08:25:52.376Z,1492158352.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:52.458Z,1492158352.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:52.854Z,1492158352.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:53.172Z,1492158353.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:53.920Z,1492158353.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:54.717Z,1492158354.717 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:55.512Z,1492158355.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:55.916Z,1492158355.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:56.713Z,1492158356.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.073Z,1492158357.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.184Z,1492158357.184 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0173.lzma
2017-04-14T08:25:57.216Z,1492158357.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.508Z,1492158357.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.594Z,1492158357.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.913Z,1492158357.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:57.962Z,1492158357.962 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0173.lzma.bak
2017-04-14T08:25:57.962Z,1492158357.962 [DataOverHttps](INFO): SBD MOMSN=4885555
2017-04-14T08:25:57.994Z,1492158357.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:58.413Z,1492158358.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:58.455Z,1492158358.455 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:25:58.455Z,1492158358.455 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:25:58.456Z,1492158358.455 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:25:58.708Z,1492158358.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:58.789Z,1492158358.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:59.504Z,1492158359.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:25:59.908Z,1492158359.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:00.704Z,1492158360.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:01.503Z,1492158361.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:01.988Z,1492158361.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:02.339Z,1492158362.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:02.466Z,1492158362.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:02.784Z,1492158362.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:02.862Z,1492158362.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:03.261Z,1492158363.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:03.580Z,1492158363.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:03.660Z,1492158363.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:04.058Z,1492158364.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:04.309Z,1492158364.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:04.462Z,1492158364.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:04.864Z,1492158364.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:05.104Z,1492158365.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:05.270Z,1492158365.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:05.661Z,1492158365.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:05.901Z,1492158365.901 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:06.049Z,1492158366.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:06.316Z,1492158366.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:06.465Z,1492158366.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:06.849Z,1492158366.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:07.113Z,1492158367.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:07.249Z,1492158367.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:07.649Z,1492158367.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:07.844Z,1492158367.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:08.053Z,1492158368.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:08.446Z,1492158368.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:08.640Z,1492158368.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:08.849Z,1492158368.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:09.249Z,1492158369.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:09.436Z,1492158369.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:09.649Z,1492158369.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:09.840Z,1492158369.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:10.049Z,1492158370.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:10.449Z,1492158370.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:10.636Z,1492158370.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:10.845Z,1492158370.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:11.261Z,1492158371.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:11.438Z,1492158371.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:11.659Z,1492158371.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:12.054Z,1492158372.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:12.232Z,1492158372.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:12.461Z,1492158372.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:12.636Z,1492158372.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:12.860Z,1492158372.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:13.263Z,1492158373.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:13.432Z,1492158373.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:13.649Z,1492158373.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:13.897Z,1492158373.897 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:14.065Z,1492158374.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:14.449Z,1492158374.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:14.692Z,1492158374.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:14.862Z,1492158374.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:15.256Z,1492158375.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:15.503Z,1492158375.503 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:15.651Z,1492158375.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:15.936Z,1492158375.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:16.056Z,1492158376.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:16.461Z,1492158376.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:16.732Z,1492158376.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:16.849Z,1492158376.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:17.249Z,1492158377.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:17.529Z,1492158377.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:17.649Z,1492158377.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:18.054Z,1492158378.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:18.280Z,1492158378.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:18.449Z,1492158378.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:18.853Z,1492158378.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:19.077Z,1492158379.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:19.251Z,1492158379.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:19.659Z,1492158379.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:19.872Z,1492158379.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:20.067Z,1492158380.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:20.282Z,1492158380.282 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:20.456Z,1492158380.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:20.851Z,1492158380.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:21.076Z,1492158381.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:21.253Z,1492158381.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:21.658Z,1492158381.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:21.832Z,1492158381.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:22.055Z,1492158382.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:22.466Z,1492158382.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:22.628Z,1492158382.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:22.843Z,1492158382.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:23.249Z,1492158383.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:23.424Z,1492158383.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:23.655Z,1492158383.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:23.836Z,1492158383.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:24.061Z,1492158384.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:24.458Z,1492158384.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:24.633Z,1492158384.633 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:24.855Z,1492158384.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:25.257Z,1492158385.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:25.428Z,1492158385.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:25.654Z,1492158385.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:25.841Z,1492158385.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:26.052Z,1492158386.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:26.465Z,1492158386.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:26.636Z,1492158386.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:26.866Z,1492158386.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:27.249Z,1492158387.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:27.432Z,1492158387.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:27.649Z,1492158387.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:27.836Z,1492158387.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:28.049Z,1492158388.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:28.457Z,1492158388.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:28.632Z,1492158388.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:28.859Z,1492158388.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:29.257Z,1492158389.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:29.430Z,1492158389.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:29.658Z,1492158389.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:29.920Z,1492158389.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:30.080Z,1492158390.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:30.452Z,1492158390.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:30.720Z,1492158390.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:30.857Z,1492158390.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:31.251Z,1492158391.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:31.516Z,1492158391.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:31.670Z,1492158391.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:32.067Z,1492158392.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:32.313Z,1492158392.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:32.451Z,1492158392.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:32.720Z,1492158392.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:32.853Z,1492158392.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:33.253Z,1492158393.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:33.516Z,1492158393.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:33.653Z,1492158393.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:34.059Z,1492158394.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:34.252Z,1492158394.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:34.459Z,1492158394.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:34.858Z,1492158394.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:35.049Z,1492158395.049 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:35.259Z,1492158395.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:35.650Z,1492158395.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:35.824Z,1492158395.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:36.053Z,1492158396.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:36.449Z,1492158396.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:36.620Z,1492158396.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:36.849Z,1492158396.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:37.249Z,1492158397.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:37.416Z,1492158397.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:37.657Z,1492158397.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:37.820Z,1492158397.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:38.062Z,1492158398.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:38.457Z,1492158398.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:38.616Z,1492158398.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:38.852Z,1492158398.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:39.250Z,1492158399.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:39.412Z,1492158399.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:39.649Z,1492158399.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:39.816Z,1492158399.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:40.054Z,1492158400.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:40.461Z,1492158400.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:40.612Z,1492158400.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:40.859Z,1492158400.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:41.258Z,1492158401.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:41.408Z,1492158401.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:41.649Z,1492158401.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:41.824Z,1492158401.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:42.049Z,1492158402.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:42.449Z,1492158402.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:42.620Z,1492158402.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:42.849Z,1492158402.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:43.253Z,1492158403.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:43.417Z,1492158403.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:43.657Z,1492158403.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:43.900Z,1492158403.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:44.061Z,1492158404.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:44.461Z,1492158404.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:44.696Z,1492158404.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:44.858Z,1492158404.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:45.256Z,1492158405.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:45.492Z,1492158405.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:45.661Z,1492158405.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:46.058Z,1492158406.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:46.272Z,1492158406.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:46.457Z,1492158406.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:46.857Z,1492158406.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:47.068Z,1492158407.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:47.265Z,1492158407.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:47.649Z,1492158407.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:47.864Z,1492158407.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:48.058Z,1492158408.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:48.272Z,1492158408.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:48.458Z,1492158408.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:48.854Z,1492158408.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:49.068Z,1492158409.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:49.257Z,1492158409.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:49.649Z,1492158409.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:49.804Z,1492158409.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:50.049Z,1492158410.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:50.461Z,1492158410.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:50.600Z,1492158410.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:50.856Z,1492158410.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:51.254Z,1492158411.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:51.396Z,1492158411.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:51.668Z,1492158411.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:51.804Z,1492158411.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:52.057Z,1492158412.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:52.457Z,1492158412.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:52.600Z,1492158412.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:52.853Z,1492158412.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:53.251Z,1492158413.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:53.396Z,1492158413.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:53.657Z,1492158413.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:53.820Z,1492158413.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:54.059Z,1492158414.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:54.454Z,1492158414.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:54.616Z,1492158414.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:54.857Z,1492158414.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:55.251Z,1492158415.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:55.412Z,1492158415.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:55.669Z,1492158415.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:55.868Z,1492158415.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:56.049Z,1492158416.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:56.457Z,1492158416.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:56.667Z,1492158416.667 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:56.849Z,1492158416.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:57.250Z,1492158417.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:57.466Z,1492158417.466 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:57.649Z,1492158417.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:57.872Z,1492158417.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:58.049Z,1492158418.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:58.453Z,1492158418.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:58.670Z,1492158418.670 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:58.853Z,1492158418.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:26:59.464Z,1492158419.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:00.228Z,1492158420.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:01.024Z,1492158421.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:01.823Z,1492158421.823 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:02.232Z,1492158422.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:02.425Z,1492158422.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:02.548Z,1492158422.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:02.906Z,1492158422.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:03.031Z,1492158423.031 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:03.374Z,1492158423.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:03.709Z,1492158423.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:03.792Z,1492158423.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:04.117Z,1492158424.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:04.501Z,1492158424.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:04.588Z,1492158424.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:04.905Z,1492158424.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:05.362Z,1492158425.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:05.384Z,1492158425.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:05.701Z,1492158425.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:05.792Z,1492158425.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:06.110Z,1492158426.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:06.504Z,1492158426.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:06.528Z,1492158426.528 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:27:06.528Z,1492158426.528 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:27:06.528Z,1492158426.528 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:27:06.559Z,1492158426.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:27:06.588Z,1492158426.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:06.905Z,1492158426.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:06.953Z,1492158426.953 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:27:06.953Z,1492158426.953 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:27:07.360Z,1492158427.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:07.384Z,1492158427.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:07.417Z,1492158427.417 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:27:07.418Z,1492158427.418 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:27:07.418Z,1492158427.418 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:27:07.709Z,1492158427.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:07.828Z,1492158427.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:08.102Z,1492158428.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:08.503Z,1492158428.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:08.624Z,1492158428.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:08.901Z,1492158428.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:09.356Z,1492158429.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:09.421Z,1492158429.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:09.738Z,1492158429.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:09.844Z,1492158429.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:10.105Z,1492158430.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:10.503Z,1492158430.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:10.640Z,1492158430.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:10.907Z,1492158430.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:11.308Z,1492158431.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:11.436Z,1492158431.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:11.701Z,1492158431.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:11.872Z,1492158431.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:12.098Z,1492158432.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:12.504Z,1492158432.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:12.668Z,1492158432.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:12.898Z,1492158432.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:13.302Z,1492158433.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:13.464Z,1492158433.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:13.735Z,1492158433.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:14.097Z,1492158434.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:14.260Z,1492158434.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:14.514Z,1492158434.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:14.907Z,1492158434.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:15.056Z,1492158435.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:15.309Z,1492158435.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:15.749Z,1492158435.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:15.859Z,1492158435.859 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:16.108Z,1492158436.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:16.268Z,1492158436.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:16.506Z,1492158436.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:16.938Z,1492158436.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:17.064Z,1492158437.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:17.353Z,1492158437.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:17.708Z,1492158437.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:17.798Z,1492158437.798 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:18.104Z,1492158438.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:18.514Z,1492158438.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:18.592Z,1492158438.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:18.897Z,1492158438.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:19.335Z,1492158439.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:19.395Z,1492158439.395 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:19.709Z,1492158439.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:19.828Z,1492158439.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:20.109Z,1492158440.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:20.497Z,1492158440.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:20.625Z,1492158440.625 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:20.906Z,1492158440.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:21.412Z,1492158441.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:21.429Z,1492158441.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:21.699Z,1492158441.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:21.836Z,1492158441.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:22.099Z,1492158442.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:22.506Z,1492158442.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:22.632Z,1492158442.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:22.905Z,1492158442.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:23.370Z,1492158443.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:23.428Z,1492158443.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:23.711Z,1492158443.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:23.832Z,1492158443.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:24.097Z,1492158444.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:24.516Z,1492158444.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:24.628Z,1492158444.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:24.896Z,1492158444.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:25.297Z,1492158445.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:25.424Z,1492158445.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:25.713Z,1492158445.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:25.868Z,1492158445.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:26.106Z,1492158446.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:26.504Z,1492158446.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:26.664Z,1492158446.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:26.906Z,1492158446.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:27.305Z,1492158447.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:27.460Z,1492158447.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:27.724Z,1492158447.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:28.101Z,1492158448.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:28.240Z,1492158448.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:28.494Z,1492158448.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:28.897Z,1492158448.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:29.036Z,1492158449.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:29.309Z,1492158449.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:29.752Z,1492158449.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:29.832Z,1492158449.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:30.105Z,1492158450.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:30.236Z,1492158450.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:30.497Z,1492158450.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:30.897Z,1492158450.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:31.032Z,1492158451.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:31.325Z,1492158451.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:31.697Z,1492158451.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:31.781Z,1492158451.781 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:32.109Z,1492158452.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:32.505Z,1492158452.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:32.576Z,1492158452.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:32.905Z,1492158452.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:33.337Z,1492158453.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:33.372Z,1492158453.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:33.706Z,1492158453.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:33.780Z,1492158453.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:34.113Z,1492158454.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:34.511Z,1492158454.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:34.576Z,1492158454.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:34.918Z,1492158454.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:35.324Z,1492158455.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:35.372Z,1492158455.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:35.697Z,1492158455.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:35.788Z,1492158455.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:36.105Z,1492158456.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:36.525Z,1492158456.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:36.592Z,1492158456.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:36.931Z,1492158456.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:37.349Z,1492158457.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:37.388Z,1492158457.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:37.706Z,1492158457.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:37.804Z,1492158457.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:38.156Z,1492158458.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:38.521Z,1492158458.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:38.600Z,1492158458.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:38.905Z,1492158458.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:39.305Z,1492158459.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:39.396Z,1492158459.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:39.697Z,1492158459.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:39.888Z,1492158459.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:40.113Z,1492158460.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:40.503Z,1492158460.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:40.686Z,1492158460.686 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:40.905Z,1492158460.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:41.325Z,1492158461.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:41.480Z,1492158461.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:41.761Z,1492158461.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:42.152Z,1492158462.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:42.200Z,1492158462.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:42.499Z,1492158462.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:42.897Z,1492158462.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:42.996Z,1492158462.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:43.304Z,1492158463.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:43.748Z,1492158463.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:43.792Z,1492158463.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:44.122Z,1492158464.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:44.212Z,1492158464.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:44.505Z,1492158464.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:44.899Z,1492158464.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:45.008Z,1492158465.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:45.318Z,1492158465.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:45.738Z,1492158465.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:45.800Z,1492158465.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:46.125Z,1492158466.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:46.542Z,1492158466.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:46.596Z,1492158466.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:46.944Z,1492158466.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:47.314Z,1492158467.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:47.392Z,1492158467.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:47.742Z,1492158467.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:47.796Z,1492158467.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:48.106Z,1492158468.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:48.511Z,1492158468.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:48.592Z,1492158468.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:48.905Z,1492158468.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:49.319Z,1492158469.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:49.388Z,1492158469.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:49.716Z,1492158469.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:49.792Z,1492158469.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:50.101Z,1492158470.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:50.501Z,1492158470.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:50.588Z,1492158470.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:50.897Z,1492158470.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:51.312Z,1492158471.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:51.384Z,1492158471.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:51.710Z,1492158471.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:51.788Z,1492158471.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:52.110Z,1492158472.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:52.505Z,1492158472.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:52.612Z,1492158472.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:52.905Z,1492158472.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:53.322Z,1492158473.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:53.408Z,1492158473.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:53.706Z,1492158473.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:53.850Z,1492158473.850 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:54.110Z,1492158474.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:54.504Z,1492158474.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:54.645Z,1492158474.645 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:54.909Z,1492158474.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:55.305Z,1492158475.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:55.440Z,1492158475.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:55.746Z,1492158475.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:56.094Z,1492158476.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:56.188Z,1492158476.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:56.494Z,1492158476.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:56.901Z,1492158476.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:56.984Z,1492158476.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:57.302Z,1492158477.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:57.744Z,1492158477.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:58.105Z,1492158478.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:58.504Z,1492158478.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:27:58.906Z,1492158478.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:02.407Z,1492158482.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:02.553Z,1492158482.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:02.927Z,1492158482.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:03.342Z,1492158483.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:03.710Z,1492158483.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:04.132Z,1492158484.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:04.514Z,1492158484.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:04.925Z,1492158484.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:05.312Z,1492158485.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:05.709Z,1492158485.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:06.123Z,1492158486.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:06.509Z,1492158486.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:06.909Z,1492158486.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:07.372Z,1492158487.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:07.725Z,1492158487.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:08.117Z,1492158488.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:08.513Z,1492158488.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:08.916Z,1492158488.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:09.325Z,1492158489.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:09.740Z,1492158489.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:10.115Z,1492158490.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:10.527Z,1492158490.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:10.920Z,1492158490.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:11.317Z,1492158491.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:11.730Z,1492158491.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:12.122Z,1492158492.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:12.524Z,1492158492.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:12.909Z,1492158492.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:13.309Z,1492158493.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:13.725Z,1492158493.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:14.130Z,1492158494.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:14.509Z,1492158494.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:14.910Z,1492158494.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:15.343Z,1492158495.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:15.721Z,1492158495.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:16.114Z,1492158496.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:16.520Z,1492158496.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:16.919Z,1492158496.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:17.332Z,1492158497.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:17.725Z,1492158497.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:18.117Z,1492158498.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:18.527Z,1492158498.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:18.922Z,1492158498.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:19.337Z,1492158499.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:19.715Z,1492158499.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:20.114Z,1492158500.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:20.514Z,1492158500.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:20.926Z,1492158500.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:21.351Z,1492158501.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:21.715Z,1492158501.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:22.122Z,1492158502.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:22.519Z,1492158502.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:22.920Z,1492158502.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:23.321Z,1492158503.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:23.733Z,1492158503.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:24.129Z,1492158504.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:24.513Z,1492158504.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:24.913Z,1492158504.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:25.309Z,1492158505.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:25.715Z,1492158505.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:26.119Z,1492158506.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:26.513Z,1492158506.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:26.914Z,1492158506.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:27.329Z,1492158507.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:27.722Z,1492158507.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:28.123Z,1492158508.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:28.511Z,1492158508.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:28.925Z,1492158508.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:29.326Z,1492158509.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:29.719Z,1492158509.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:30.127Z,1492158510.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:30.516Z,1492158510.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:30.933Z,1492158510.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:31.337Z,1492158511.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:31.715Z,1492158511.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:32.124Z,1492158512.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:32.518Z,1492158512.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:32.916Z,1492158512.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:33.323Z,1492158513.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:33.723Z,1492158513.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:34.164Z,1492158514.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:34.509Z,1492158514.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:34.914Z,1492158514.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:35.345Z,1492158515.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:35.721Z,1492158515.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:36.118Z,1492158516.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:36.517Z,1492158516.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:36.919Z,1492158516.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:37.309Z,1492158517.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:37.709Z,1492158517.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:38.113Z,1492158518.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:38.510Z,1492158518.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:38.909Z,1492158518.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:39.309Z,1492158519.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:39.712Z,1492158519.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:40.125Z,1492158520.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:40.509Z,1492158520.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:40.918Z,1492158520.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:41.309Z,1492158521.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:41.715Z,1492158521.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:42.109Z,1492158522.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:42.510Z,1492158522.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:42.917Z,1492158522.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:43.348Z,1492158523.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:43.740Z,1492158523.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:44.116Z,1492158524.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:44.519Z,1492158524.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:44.911Z,1492158524.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:45.311Z,1492158525.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:45.711Z,1492158525.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:46.114Z,1492158526.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:46.514Z,1492158526.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:46.921Z,1492158526.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:47.348Z,1492158527.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:47.710Z,1492158527.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:48.141Z,1492158528.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:48.509Z,1492158528.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:48.921Z,1492158528.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:49.316Z,1492158529.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:49.719Z,1492158529.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:50.119Z,1492158530.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:50.511Z,1492158530.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:50.909Z,1492158530.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:51.329Z,1492158531.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:51.368Z,1492158531.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:51.733Z,1492158531.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:52.121Z,1492158532.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:52.152Z,1492158532.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:52.509Z,1492158532.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:52.909Z,1492158532.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:53.310Z,1492158533.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:53.719Z,1492158533.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:54.120Z,1492158534.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:54.511Z,1492158534.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:54.950Z,1492158534.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:55.349Z,1492158535.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:55.745Z,1492158535.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:56.123Z,1492158536.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:56.534Z,1492158536.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:56.909Z,1492158536.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:57.325Z,1492158537.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:57.723Z,1492158537.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:58.124Z,1492158538.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:58.526Z,1492158538.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:58.910Z,1492158538.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:59.312Z,1492158539.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:28:59.709Z,1492158539.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:00.117Z,1492158540.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:00.509Z,1492158540.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:00.913Z,1492158540.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:01.339Z,1492158541.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:01.714Z,1492158541.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:02.120Z,1492158542.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:02.492Z,1492158542.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:02.519Z,1492158542.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:03.288Z,1492158543.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:03.704Z,1492158543.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:04.500Z,1492158544.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:05.296Z,1492158545.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:06.040Z,1492158546.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:06.060Z,1492158546.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:06.272Z,1492158546.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:06.617Z,1492158546.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:06.836Z,1492158546.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:07.023Z,1492158547.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:07.413Z,1492158547.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:07.637Z,1492158547.637 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:07.809Z,1492158547.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:08.044Z,1492158548.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:08.237Z,1492158548.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:08.615Z,1492158548.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:08.841Z,1492158548.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:09.015Z,1492158549.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:09.424Z,1492158549.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:09.636Z,1492158549.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:09.819Z,1492158549.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:10.040Z,1492158550.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:10.219Z,1492158550.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:10.609Z,1492158550.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:10.836Z,1492158550.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:11.021Z,1492158551.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:11.452Z,1492158551.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:11.588Z,1492158551.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:11.818Z,1492158551.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:12.215Z,1492158552.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:12.386Z,1492158552.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:12.614Z,1492158552.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:13.014Z,1492158553.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:13.180Z,1492158553.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:13.409Z,1492158553.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:13.588Z,1492158553.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:13.826Z,1492158553.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:14.209Z,1492158554.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:14.384Z,1492158554.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:14.609Z,1492158554.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:15.009Z,1492158555.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:15.180Z,1492158555.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:15.423Z,1492158555.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:15.584Z,1492158555.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:15.816Z,1492158555.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:16.217Z,1492158556.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:16.380Z,1492158556.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:16.617Z,1492158556.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:17.016Z,1492158557.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:17.178Z,1492158557.178 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:17.429Z,1492158557.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:17.660Z,1492158557.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:17.825Z,1492158557.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:18.209Z,1492158558.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:18.456Z,1492158558.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:18.609Z,1492158558.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:19.009Z,1492158559.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:19.252Z,1492158559.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:19.409Z,1492158559.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:19.809Z,1492158559.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:20.014Z,1492158560.014 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:20.209Z,1492158560.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:20.606Z,1492158560.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:20.808Z,1492158560.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:21.013Z,1492158561.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:21.414Z,1492158561.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:21.604Z,1492158561.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:21.824Z,1492158561.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:22.028Z,1492158562.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:22.225Z,1492158562.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:22.617Z,1492158562.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:22.824Z,1492158562.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:23.021Z,1492158563.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:23.409Z,1492158563.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:23.568Z,1492158563.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:23.809Z,1492158563.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:24.213Z,1492158564.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:24.364Z,1492158564.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:24.618Z,1492158564.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:25.017Z,1492158565.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:25.160Z,1492158565.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:25.409Z,1492158565.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:25.572Z,1492158565.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:25.813Z,1492158565.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:26.213Z,1492158566.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:26.368Z,1492158566.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:26.607Z,1492158566.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:27.021Z,1492158567.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:27.164Z,1492158567.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:27.418Z,1492158567.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:27.581Z,1492158567.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:27.817Z,1492158567.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:28.218Z,1492158568.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:28.376Z,1492158568.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:28.606Z,1492158568.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:29.017Z,1492158569.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:29.172Z,1492158569.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:29.423Z,1492158569.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:29.581Z,1492158569.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:29.809Z,1492158569.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:30.218Z,1492158570.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:30.376Z,1492158570.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:30.618Z,1492158570.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:31.021Z,1492158571.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:31.175Z,1492158571.175 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:31.417Z,1492158571.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:31.644Z,1492158571.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:31.819Z,1492158571.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:32.218Z,1492158572.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:32.440Z,1492158572.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:32.637Z,1492158572.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:33.011Z,1492158573.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:33.236Z,1492158573.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:33.411Z,1492158573.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:33.811Z,1492158573.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:34.028Z,1492158574.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:34.224Z,1492158574.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:34.616Z,1492158574.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:34.824Z,1492158574.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:35.009Z,1492158575.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:35.409Z,1492158575.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:35.620Z,1492158575.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:35.809Z,1492158575.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:36.024Z,1492158576.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:36.240Z,1492158576.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:36.617Z,1492158576.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:36.820Z,1492158576.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:37.010Z,1492158577.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:37.418Z,1492158577.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:37.594Z,1492158577.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:37.820Z,1492158577.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:38.217Z,1492158578.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:38.388Z,1492158578.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:38.618Z,1492158578.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:39.052Z,1492158579.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:39.184Z,1492158579.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:39.410Z,1492158579.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:39.811Z,1492158579.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:39.980Z,1492158579.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:40.213Z,1492158580.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:40.384Z,1492158580.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:40.629Z,1492158580.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:41.019Z,1492158581.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:41.181Z,1492158581.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:41.457Z,1492158581.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:41.592Z,1492158581.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:41.823Z,1492158581.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:42.218Z,1492158582.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:42.389Z,1492158582.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:42.618Z,1492158582.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:43.017Z,1492158583.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:43.184Z,1492158583.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:43.421Z,1492158583.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:43.588Z,1492158583.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:43.826Z,1492158583.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:44.209Z,1492158584.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:44.384Z,1492158584.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:44.610Z,1492158584.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:45.012Z,1492158585.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:45.182Z,1492158585.182 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:45.411Z,1492158585.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:45.644Z,1492158585.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:45.809Z,1492158585.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:46.209Z,1492158586.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:46.440Z,1492158586.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:46.613Z,1492158586.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:47.015Z,1492158587.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:47.236Z,1492158587.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:47.425Z,1492158587.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:47.822Z,1492158587.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:48.004Z,1492158588.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:48.220Z,1492158588.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:48.617Z,1492158588.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:48.816Z,1492158588.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:49.019Z,1492158589.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:49.433Z,1492158589.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:49.612Z,1492158589.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:49.916Z,1492158589.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:50.132Z,1492158590.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:50.285Z,1492158590.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:50.671Z,1492158590.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:50.928Z,1492158590.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:51.098Z,1492158591.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:51.469Z,1492158591.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:51.592Z,1492158591.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:51.873Z,1492158591.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:52.280Z,1492158592.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:52.388Z,1492158592.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:52.671Z,1492158592.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:53.140Z,1492158593.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:53.184Z,1492158593.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:53.471Z,1492158593.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:53.624Z,1492158593.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:53.871Z,1492158593.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:54.271Z,1492158594.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:54.420Z,1492158594.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:54.677Z,1492158594.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:55.117Z,1492158595.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:55.216Z,1492158595.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:55.475Z,1492158595.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:55.620Z,1492158595.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:55.881Z,1492158595.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:56.275Z,1492158596.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:56.416Z,1492158596.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:56.669Z,1492158596.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:57.103Z,1492158597.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:57.212Z,1492158597.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:57.470Z,1492158597.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:57.616Z,1492158597.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:57.869Z,1492158597.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:58.276Z,1492158598.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:58.412Z,1492158598.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:58.681Z,1492158598.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:59.080Z,1492158599.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:59.208Z,1492158599.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:29:59.664Z,1492158599.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:00.462Z,1492158600.462 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:01.256Z,1492158601.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:01.953Z,1492158601.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:02.748Z,1492158602.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:03.181Z,1492158603.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:03.344Z,1492158603.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:03.545Z,1492158603.546 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:03.733Z,1492158603.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:03.956Z,1492158603.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:04.132Z,1492158604.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:04.530Z,1492158604.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:04.753Z,1492158604.753 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:04.926Z,1492158604.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:05.331Z,1492158605.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:05.512Z,1492158605.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:05.739Z,1492158605.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:06.134Z,1492158606.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:06.308Z,1492158606.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:06.535Z,1492158606.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:06.964Z,1492158606.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:07.108Z,1492158607.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:07.340Z,1492158607.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:07.420Z,1492158607.420 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:30:07.420Z,1492158607.420 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:30:07.420Z,1492158607.420 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:30:07.450Z,1492158607.450 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:30:07.556Z,1492158607.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:07.737Z,1492158607.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:07.805Z,1492158607.805 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:30:07.805Z,1492158607.805 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:30:08.141Z,1492158608.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:08.234Z,1492158608.234 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:30:08.234Z,1492158608.234 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:30:08.235Z,1492158608.234 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:30:08.352Z,1492158608.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:08.525Z,1492158608.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:08.925Z,1492158608.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:09.149Z,1492158609.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:09.355Z,1492158609.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:09.556Z,1492158609.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:09.738Z,1492158609.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:10.137Z,1492158610.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:10.352Z,1492158610.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:10.541Z,1492158610.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:10.939Z,1492158610.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:11.150Z,1492158611.150 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:11.341Z,1492158611.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:11.557Z,1492158611.557 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:11.736Z,1492158611.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:12.141Z,1492158612.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:12.352Z,1492158612.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:12.541Z,1492158612.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:12.966Z,1492158612.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:13.148Z,1492158613.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:13.340Z,1492158613.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:13.640Z,1492158613.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:13.737Z,1492158613.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:14.136Z,1492158614.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:14.436Z,1492158614.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:14.541Z,1492158614.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:14.933Z,1492158614.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:15.232Z,1492158615.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:15.329Z,1492158615.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:15.741Z,1492158615.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:15.933Z,1492158615.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:16.132Z,1492158616.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:16.538Z,1492158616.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:16.728Z,1492158616.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:16.936Z,1492158616.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:17.338Z,1492158617.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:17.524Z,1492158617.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:17.733Z,1492158617.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:17.928Z,1492158617.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:18.133Z,1492158618.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:18.534Z,1492158618.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:18.724Z,1492158618.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:18.929Z,1492158618.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:19.332Z,1492158619.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:19.496Z,1492158619.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:19.738Z,1492158619.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:20.137Z,1492158620.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:20.292Z,1492158620.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:20.541Z,1492158620.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:20.945Z,1492158620.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:21.089Z,1492158621.089 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:21.343Z,1492158621.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:21.540Z,1492158621.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:21.736Z,1492158621.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:22.134Z,1492158622.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:22.336Z,1492158622.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:22.530Z,1492158622.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:22.937Z,1492158622.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:23.132Z,1492158623.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:23.347Z,1492158623.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:23.536Z,1492158623.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:23.725Z,1492158623.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:24.130Z,1492158624.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:24.332Z,1492158624.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:24.525Z,1492158624.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:24.930Z,1492158624.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:25.128Z,1492158625.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:25.325Z,1492158625.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:25.532Z,1492158625.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:25.726Z,1492158625.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:26.125Z,1492158626.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:26.328Z,1492158626.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:26.525Z,1492158626.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:26.929Z,1492158626.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:27.124Z,1492158627.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:27.325Z,1492158627.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:27.544Z,1492158627.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:27.725Z,1492158627.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:28.125Z,1492158628.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:28.342Z,1492158628.342 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:28.529Z,1492158628.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:28.929Z,1492158628.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:29.136Z,1492158629.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:29.329Z,1492158629.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:29.729Z,1492158629.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:29.892Z,1492158629.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:30.141Z,1492158630.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:30.534Z,1492158630.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:30.688Z,1492158630.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:30.932Z,1492158630.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:31.338Z,1492158631.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:31.486Z,1492158631.486 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:31.725Z,1492158631.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:31.919Z,1492158631.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:32.130Z,1492158632.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:32.532Z,1492158632.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:32.712Z,1492158632.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:32.930Z,1492158632.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:33.329Z,1492158633.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:33.468Z,1492158633.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:33.734Z,1492158633.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:34.132Z,1492158634.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:34.265Z,1492158634.265 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:34.530Z,1492158634.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:34.933Z,1492158634.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:35.060Z,1492158635.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:35.326Z,1492158635.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:35.464Z,1492158635.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:35.725Z,1492158635.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:36.138Z,1492158636.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:36.260Z,1492158636.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:36.534Z,1492158636.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:37.005Z,1492158637.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:37.056Z,1492158637.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:37.337Z,1492158637.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:37.476Z,1492158637.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:37.737Z,1492158637.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:38.133Z,1492158638.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:38.272Z,1492158638.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:38.535Z,1492158638.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:38.933Z,1492158638.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:39.068Z,1492158639.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:39.334Z,1492158639.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:39.473Z,1492158639.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:39.741Z,1492158639.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:40.125Z,1492158640.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:40.268Z,1492158640.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:40.522Z,1492158640.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:40.929Z,1492158640.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:41.067Z,1492158641.067 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:41.333Z,1492158641.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:41.532Z,1492158641.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:41.737Z,1492158641.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:42.134Z,1492158642.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:42.328Z,1492158642.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:42.548Z,1492158642.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:42.930Z,1492158642.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:43.124Z,1492158643.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:43.341Z,1492158643.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:43.731Z,1492158643.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:43.912Z,1492158643.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:44.138Z,1492158644.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:44.525Z,1492158644.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:44.708Z,1492158644.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:44.933Z,1492158644.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:45.327Z,1492158645.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:45.504Z,1492158645.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:45.725Z,1492158645.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:45.952Z,1492158645.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:46.135Z,1492158646.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:46.525Z,1492158646.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:46.752Z,1492158646.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:46.950Z,1492158646.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:47.332Z,1492158647.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:47.476Z,1492158647.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:47.733Z,1492158647.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:48.125Z,1492158648.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:48.273Z,1492158648.273 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:48.533Z,1492158648.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:48.994Z,1492158648.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:49.068Z,1492158649.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:49.326Z,1492158649.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:49.485Z,1492158649.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:49.725Z,1492158649.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:50.129Z,1492158650.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:50.280Z,1492158650.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:50.525Z,1492158650.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:50.946Z,1492158650.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:51.077Z,1492158651.077 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:51.344Z,1492158651.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:51.484Z,1492158651.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:51.729Z,1492158651.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:52.127Z,1492158652.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:52.280Z,1492158652.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:52.529Z,1492158652.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:52.989Z,1492158652.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:53.076Z,1492158653.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:53.336Z,1492158653.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:53.492Z,1492158653.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:53.728Z,1492158653.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:54.127Z,1492158654.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:54.288Z,1492158654.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:54.528Z,1492158654.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:54.934Z,1492158654.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:55.084Z,1492158655.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:55.344Z,1492158655.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:55.560Z,1492158655.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:55.725Z,1492158655.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:56.127Z,1492158656.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:56.356Z,1492158656.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:56.525Z,1492158656.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:56.930Z,1492158656.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:57.152Z,1492158657.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:57.330Z,1492158657.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:57.725Z,1492158657.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:57.892Z,1492158657.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:58.141Z,1492158658.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:58.525Z,1492158658.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:58.688Z,1492158658.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:58.925Z,1492158658.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:58.961Z,1492158658.961 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:30:58.961Z,1492158658.961 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:30:58.961Z,1492158658.961 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:30:58.961Z,1492158658.961 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:30:59.325Z,1492158659.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:59.450Z,1492158659.450 [Default:CheckIn:D] Stopped
2017-04-14T08:30:59.450Z,1492158659.450 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:30:59.484Z,1492158659.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:30:59.900Z,1492158659.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:00.696Z,1492158660.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:01.450Z,1492158661.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:02.244Z,1492158662.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:03.043Z,1492158663.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:03.452Z,1492158663.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:03.645Z,1492158663.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:03.765Z,1492158663.765 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 304.902181 min 
2017-04-14T08:31:03.765Z,1492158663.765 [Default:CheckIn:E] Stopped
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn] Stopped
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn](INFO): Running loop #43
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn] Running Loop=43
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:31:03.766Z,1492158663.766 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:31:03.840Z,1492158663.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:04.212Z,1492158664.212 [NAL9602](INFO): Powering up
2017-04-14T08:31:04.235Z,1492158664.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:04.249Z,1492158664.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:04.653Z,1492158664.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:05.044Z,1492158665.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:05.048Z,1492158665.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:05.437Z,1492158665.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:05.448Z,1492158665.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:05.829Z,1492158665.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:06.229Z,1492158666.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:06.244Z,1492158666.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:06.634Z,1492158666.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:07.029Z,1492158667.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:07.040Z,1492158667.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:07.438Z,1492158667.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:07.445Z,1492158667.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:07.836Z,1492158667.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:08.238Z,1492158668.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:08.240Z,1492158668.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:08.629Z,1492158668.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:09.037Z,1492158669.037 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:09.082Z,1492158669.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:09.439Z,1492158669.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:09.544Z,1492158669.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:09.846Z,1492158669.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:10.233Z,1492158670.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:10.341Z,1492158670.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:10.632Z,1492158670.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:11.032Z,1492158671.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:11.136Z,1492158671.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:11.435Z,1492158671.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:11.829Z,1492158671.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:11.872Z,1492158671.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:12.245Z,1492158672.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:12.640Z,1492158672.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:12.668Z,1492158672.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:13.039Z,1492158673.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:13.435Z,1492158673.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:13.464Z,1492158673.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:13.842Z,1492158673.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:13.884Z,1492158673.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:14.244Z,1492158674.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:14.659Z,1492158674.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:14.680Z,1492158674.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:15.013Z,1492158675.013 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:31:15.047Z,1492158675.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:15.364Z,1492158675.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:15.445Z,1492158675.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:15.853Z,1492158675.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:16.160Z,1492158676.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:16.255Z,1492158676.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:16.663Z,1492158676.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:16.956Z,1492158676.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:17.061Z,1492158677.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:17.360Z,1492158677.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:17.444Z,1492158677.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:17.848Z,1492158677.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:18.157Z,1492158678.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:18.246Z,1492158678.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:18.688Z,1492158678.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:18.952Z,1492158678.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:19.065Z,1492158679.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:19.452Z,1492158679.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:19.506Z,1492158679.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:19.846Z,1492158679.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:20.245Z,1492158680.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:20.248Z,1492158680.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:20.717Z,1492158680.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:21.048Z,1492158681.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:21.087Z,1492158681.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:21.448Z,1492158681.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:21.452Z,1492158681.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:21.843Z,1492158681.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:22.238Z,1492158682.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:22.248Z,1492158682.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:22.642Z,1492158682.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:23.045Z,1492158683.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:23.090Z,1492158683.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:23.446Z,1492158683.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:23.536Z,1492158683.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:23.841Z,1492158683.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:24.245Z,1492158684.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:24.332Z,1492158684.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:24.654Z,1492158684.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:25.048Z,1492158685.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:25.128Z,1492158685.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:25.459Z,1492158685.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:25.842Z,1492158685.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:25.892Z,1492158685.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:26.236Z,1492158686.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:26.666Z,1492158686.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:26.688Z,1492158686.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:27.047Z,1492158687.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:27.484Z,1492158687.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:27.516Z,1492158687.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:27.914Z,1492158687.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:28.020Z,1492158688.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:28.284Z,1492158688.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:28.706Z,1492158688.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:28.824Z,1492158688.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:29.164Z,1492158689.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:29.592Z,1492158689.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:29.633Z,1492158689.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:30.027Z,1492158690.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:30.396Z,1492158690.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:30.580Z,1492158690.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:31.164Z,1492158691.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:31.200Z,1492158691.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:31.608Z,1492158691.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:31.623Z,1492158691.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:32.015Z,1492158692.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:32.412Z,1492158692.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:32.633Z,1492158692.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:33.089Z,1492158693.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:33.216Z,1492158693.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:33.474Z,1492158693.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:33.624Z,1492158693.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:33.876Z,1492158693.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:34.237Z,1492158694.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:34.428Z,1492158694.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:34.681Z,1492158694.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:35.148Z,1492158695.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:35.224Z,1492158695.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:35.478Z,1492158695.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:35.628Z,1492158695.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:35.884Z,1492158695.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:36.322Z,1492158696.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:36.426Z,1492158696.426 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:36.676Z,1492158696.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:37.071Z,1492158697.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:37.220Z,1492158697.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:37.474Z,1492158697.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:37.624Z,1492158697.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:37.885Z,1492158697.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:38.289Z,1492158698.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:38.421Z,1492158698.421 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:38.667Z,1492158698.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:39.069Z,1492158699.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:39.216Z,1492158699.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:39.469Z,1492158699.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:39.789Z,1492158699.789 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:39.869Z,1492158699.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:40.269Z,1492158700.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:40.584Z,1492158700.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:40.677Z,1492158700.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:41.069Z,1492158701.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:41.385Z,1492158701.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:41.495Z,1492158701.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:41.792Z,1492158701.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:41.873Z,1492158701.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:42.269Z,1492158702.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:42.599Z,1492158702.599 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:42.673Z,1492158702.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:43.074Z,1492158703.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:43.332Z,1492158703.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:43.479Z,1492158703.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:43.877Z,1492158703.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:44.128Z,1492158704.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:44.284Z,1492158704.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:44.672Z,1492158704.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:44.924Z,1492158704.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:45.069Z,1492158705.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:45.330Z,1492158705.330 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:45.491Z,1492158705.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:45.869Z,1492158705.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:46.124Z,1492158706.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:46.296Z,1492158706.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:46.305Z,1492158706.305 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T08:31:46.305Z,1492158706.305 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:31:46.305Z,1492158706.305 [BPC1](ERROR): Data Fault
2017-04-14T08:31:46.371Z,1492158706.371 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:31:46.679Z,1492158706.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:46.920Z,1492158706.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:47.072Z,1492158707.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:47.324Z,1492158707.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:47.477Z,1492158707.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:47.534Z,1492158707.534 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:31:47.534Z,1492158707.534 [BPC1] No Fault, FailCount= 1
2017-04-14T08:31:47.873Z,1492158707.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:48.120Z,1492158708.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:48.273Z,1492158708.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:48.677Z,1492158708.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:48.916Z,1492158708.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:49.075Z,1492158709.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:49.320Z,1492158709.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:49.469Z,1492158709.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:49.878Z,1492158709.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:50.116Z,1492158710.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:50.274Z,1492158710.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:50.680Z,1492158710.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:50.912Z,1492158710.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:51.085Z,1492158711.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:51.432Z,1492158711.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:51.494Z,1492158711.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:51.867Z,1492158711.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:52.228Z,1492158712.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:52.269Z,1492158712.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:52.669Z,1492158712.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:53.024Z,1492158713.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:53.073Z,1492158713.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:53.469Z,1492158713.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:53.764Z,1492158713.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:53.873Z,1492158713.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:54.273Z,1492158714.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:54.560Z,1492158714.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:54.671Z,1492158714.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:55.094Z,1492158715.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:55.356Z,1492158715.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:55.520Z,1492158715.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:55.766Z,1492158715.766 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:55.879Z,1492158715.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:56.278Z,1492158716.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:56.560Z,1492158716.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:56.674Z,1492158716.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:57.077Z,1492158717.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:57.320Z,1492158717.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:57.484Z,1492158717.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:57.882Z,1492158717.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:58.116Z,1492158718.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:58.286Z,1492158718.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:58.687Z,1492158718.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:58.912Z,1492158718.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:59.069Z,1492158719.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:59.316Z,1492158719.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:31:59.469Z,1492158719.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:00.112Z,1492158720.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:00.908Z,1492158720.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:01.316Z,1492158721.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:02.112Z,1492158722.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:02.908Z,1492158722.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:02.993Z,1492158722.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:03.171Z,1492158723.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:03.316Z,1492158723.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:03.564Z,1492158723.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:03.959Z,1492158723.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:04.112Z,1492158724.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:04.344Z,1492158724.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:04.757Z,1492158724.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:04.910Z,1492158724.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:05.141Z,1492158725.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:05.396Z,1492158725.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:05.553Z,1492158725.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:05.942Z,1492158725.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:06.192Z,1492158726.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:06.341Z,1492158726.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:06.758Z,1492158726.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:06.988Z,1492158726.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:07.158Z,1492158727.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:07.541Z,1492158727.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:07.749Z,1492158727.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:07.939Z,1492158727.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:08.345Z,1492158728.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:08.545Z,1492158728.545 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:08.743Z,1492158728.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:09.145Z,1492158729.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:09.340Z,1492158729.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:09.541Z,1492158729.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:09.744Z,1492158729.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:09.941Z,1492158729.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:10.341Z,1492158730.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:10.540Z,1492158730.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:10.741Z,1492158730.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:11.141Z,1492158731.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:11.312Z,1492158731.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:11.549Z,1492158731.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:11.961Z,1492158731.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:12.108Z,1492158732.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:12.341Z,1492158732.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:12.741Z,1492158732.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:12.904Z,1492158732.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:13.141Z,1492158733.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:13.318Z,1492158733.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:13.549Z,1492158733.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:13.948Z,1492158733.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:14.112Z,1492158734.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:14.357Z,1492158734.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:14.750Z,1492158734.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:14.908Z,1492158734.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:15.141Z,1492158735.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:15.321Z,1492158735.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:15.549Z,1492158735.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:15.946Z,1492158735.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:16.118Z,1492158736.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:16.348Z,1492158736.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:16.749Z,1492158736.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:16.912Z,1492158736.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:17.159Z,1492158737.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:17.320Z,1492158737.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:17.527Z,1492158737.527 [NAL9602](INFO): SBD MO Status=2, MOMSN=2136, MT Status=2, MTMSN=0
2017-04-14T08:32:17.527Z,1492158737.527 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:32:17.554Z,1492158737.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:17.956Z,1492158737.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:18.116Z,1492158738.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:18.344Z,1492158738.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:18.744Z,1492158738.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:18.914Z,1492158738.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:19.149Z,1492158739.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:19.452Z,1492158739.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:19.568Z,1492158739.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:19.954Z,1492158739.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:20.248Z,1492158740.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:20.351Z,1492158740.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:20.751Z,1492158740.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:21.044Z,1492158741.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:21.158Z,1492158741.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:21.568Z,1492158741.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:21.756Z,1492158741.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:21.967Z,1492158741.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:22.361Z,1492158742.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:22.552Z,1492158742.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:22.759Z,1492158742.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:23.152Z,1492158743.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:23.349Z,1492158743.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:23.541Z,1492158743.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:23.752Z,1492158743.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:23.946Z,1492158743.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:24.349Z,1492158744.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:24.548Z,1492158744.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:24.743Z,1492158744.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:25.161Z,1492158745.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:25.320Z,1492158745.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:25.565Z,1492158745.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:25.941Z,1492158745.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:26.118Z,1492158746.118 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:26.357Z,1492158746.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:26.741Z,1492158746.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:26.912Z,1492158746.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:27.144Z,1492158747.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:27.317Z,1492158747.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:27.554Z,1492158747.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:27.941Z,1492158747.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:28.112Z,1492158748.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:28.365Z,1492158748.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:28.741Z,1492158748.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:28.908Z,1492158748.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:29.151Z,1492158749.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:29.313Z,1492158749.313 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:29.549Z,1492158749.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:29.950Z,1492158749.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:30.108Z,1492158750.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:30.383Z,1492158750.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:30.755Z,1492158750.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:30.905Z,1492158750.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:30.922Z,1492158750.922 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:32:31.148Z,1492158751.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:31.549Z,1492158751.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:31.584Z,1492158751.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:31.949Z,1492158751.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:32.360Z,1492158752.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:32.380Z,1492158752.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:32.754Z,1492158752.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:33.150Z,1492158753.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:33.176Z,1492158753.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:33.553Z,1492158753.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:33.580Z,1492158753.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:33.964Z,1492158753.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:34.363Z,1492158754.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:34.376Z,1492158754.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:34.760Z,1492158754.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:35.154Z,1492158755.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:35.172Z,1492158755.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:35.547Z,1492158755.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:35.756Z,1492158755.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:35.951Z,1492158755.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:36.349Z,1492158756.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:36.552Z,1492158756.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:36.747Z,1492158756.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:37.154Z,1492158757.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:37.348Z,1492158757.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:37.541Z,1492158757.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:37.752Z,1492158757.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:37.943Z,1492158757.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:38.367Z,1492158758.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:38.548Z,1492158758.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:38.842Z,1492158758.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:39.158Z,1492158759.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:39.352Z,1492158759.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:39.553Z,1492158759.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:39.756Z,1492158759.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:39.953Z,1492158759.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:40.342Z,1492158760.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:40.552Z,1492158760.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:40.744Z,1492158760.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:41.154Z,1492158761.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:41.348Z,1492158761.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:41.553Z,1492158761.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:41.957Z,1492158761.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:42.048Z,1492158762.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:42.352Z,1492158762.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:42.783Z,1492158762.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:42.844Z,1492158762.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:43.143Z,1492158763.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:43.327Z,1492158763.327 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:43.545Z,1492158763.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:43.978Z,1492158763.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:44.124Z,1492158764.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:44.356Z,1492158764.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:44.774Z,1492158764.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:44.920Z,1492158764.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:45.149Z,1492158765.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:45.324Z,1492158765.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:45.550Z,1492158765.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:45.951Z,1492158765.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:46.120Z,1492158766.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:46.352Z,1492158766.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:46.753Z,1492158766.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:46.916Z,1492158766.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:47.145Z,1492158767.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:47.384Z,1492158767.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:47.550Z,1492158767.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:47.953Z,1492158767.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:48.180Z,1492158768.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:48.355Z,1492158768.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:48.750Z,1492158768.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:48.976Z,1492158768.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:49.144Z,1492158769.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:49.549Z,1492158769.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:49.724Z,1492158769.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:49.946Z,1492158769.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:50.349Z,1492158770.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:50.520Z,1492158770.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:50.744Z,1492158770.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:51.146Z,1492158771.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:51.316Z,1492158771.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:51.541Z,1492158771.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:51.720Z,1492158771.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:51.959Z,1492158771.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:52.341Z,1492158772.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:52.516Z,1492158772.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:52.795Z,1492158772.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:53.155Z,1492158773.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:53.312Z,1492158773.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:53.552Z,1492158773.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:53.716Z,1492158773.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:53.954Z,1492158773.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:54.353Z,1492158774.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:54.512Z,1492158774.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:54.795Z,1492158774.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:55.149Z,1492158775.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:55.292Z,1492158775.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:55.561Z,1492158775.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:55.946Z,1492158775.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:56.090Z,1492158776.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:56.350Z,1492158776.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:56.802Z,1492158776.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:56.884Z,1492158776.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:57.138Z,1492158777.138 [NAL9602](INFO): SBD MO Status=2, MOMSN=2136, MT Status=2, MTMSN=0
2017-04-14T08:32:57.138Z,1492158777.138 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:32:57.156Z,1492158777.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:57.296Z,1492158777.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:57.559Z,1492158777.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:57.956Z,1492158777.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:58.092Z,1492158778.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:58.350Z,1492158778.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:58.806Z,1492158778.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:58.889Z,1492158778.889 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:59.159Z,1492158779.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:59.324Z,1492158779.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:32:59.544Z,1492158779.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:00.120Z,1492158780.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:00.916Z,1492158780.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:01.332Z,1492158781.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:02.128Z,1492158782.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:02.924Z,1492158782.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:03.447Z,1492158783.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:03.720Z,1492158783.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:03.752Z,1492158783.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:04.089Z,1492158784.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:04.124Z,1492158784.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:04.493Z,1492158784.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:04.892Z,1492158784.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:04.920Z,1492158784.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:05.308Z,1492158785.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:05.686Z,1492158785.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:05.716Z,1492158785.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:06.085Z,1492158786.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:06.120Z,1492158786.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:06.503Z,1492158786.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:06.906Z,1492158786.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:06.916Z,1492158786.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:07.304Z,1492158787.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:07.320Z,1492158787.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:07.690Z,1492158787.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.098Z,1492158788.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.132Z,1492158788.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.500Z,1492158788.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.533Z,1492158788.533 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:33:08.533Z,1492158788.533 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T08:33:08.533Z,1492158788.533 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:33:08.563Z,1492158788.563 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:33:08.910Z,1492158788.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.928Z,1492158788.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:08.988Z,1492158788.988 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:33:08.988Z,1492158788.988 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T08:33:09.332Z,1492158789.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:09.355Z,1492158789.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:09.418Z,1492158789.418 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:33:09.418Z,1492158789.418 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:33:09.419Z,1492158789.419 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:33:09.688Z,1492158789.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:10.121Z,1492158790.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:10.128Z,1492158790.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:10.574Z,1492158790.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:10.928Z,1492158790.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:11.041Z,1492158791.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:11.388Z,1492158791.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:11.396Z,1492158791.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:11.772Z,1492158791.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:12.196Z,1492158792.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:12.199Z,1492158792.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:12.628Z,1492158792.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:12.996Z,1492158792.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:12.999Z,1492158792.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:13.395Z,1492158793.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:13.404Z,1492158793.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:13.816Z,1492158793.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:14.208Z,1492158794.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:14.232Z,1492158794.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:14.651Z,1492158794.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:15.004Z,1492158795.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:15.086Z,1492158795.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:15.430Z,1492158795.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:15.460Z,1492158795.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:15.820Z,1492158795.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:16.198Z,1492158796.198 [NAL9602](INFO): SBD MO Status=0, MOMSN=2136, MT Status=0, MTMSN=0
2017-04-14T08:33:16.198Z,1492158796.198 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:33:16.222Z,1492158796.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:16.256Z,1492158796.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:16.617Z,1492158796.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:17.027Z,1492158797.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:17.052Z,1492158797.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:17.404Z,1492158797.404 [NAL9602](INFO): GPS fix at 20170414T083344: (36.802318, -121.787113)
2017-04-14T08:33:17.422Z,1492158797.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:17.484Z,1492158797.484 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:33:17.484Z,1492158797.484 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:33:17.700Z,1492158797.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:17.840Z,1492158797.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:18.229Z,1492158798.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:18.496Z,1492158798.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:18.643Z,1492158798.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:19.292Z,1492158799.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:19.696Z,1492158799.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:20.492Z,1492158800.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:21.184Z,1492158801.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:22.438Z,1492158802.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:22.576Z,1492158802.576 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0176.lzma
2017-04-14T08:33:22.609Z,1492158802.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:22.990Z,1492158802.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:23.358Z,1492158803.358 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0176.lzma.bak
2017-04-14T08:33:23.358Z,1492158803.358 [DataOverHttps](INFO): SBD MOMSN=4885560
2017-04-14T08:33:23.400Z,1492158803.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:23.821Z,1492158803.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:24.056Z,1492158804.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:24.216Z,1492158804.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:24.852Z,1492158804.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:25.256Z,1492158805.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:26.052Z,1492158806.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:26.848Z,1492158806.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:27.252Z,1492158807.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:28.048Z,1492158808.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:28.553Z,1492158808.553 [NAL9602](INFO): Powering down
2017-04-14T08:33:28.612Z,1492158808.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:28.749Z,1492158808.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:28.846Z,1492158808.846 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:29.122Z,1492158809.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:29.316Z,1492158809.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:29.506Z,1492158809.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:29.917Z,1492158809.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:30.112Z,1492158810.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:30.316Z,1492158810.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:30.908Z,1492158810.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:31.636Z,1492158811.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:32.433Z,1492158812.433 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:33.229Z,1492158813.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:33.638Z,1492158813.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:34.432Z,1492158814.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:34.550Z,1492158814.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:34.656Z,1492158814.657 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0177.lzma
2017-04-14T08:33:34.725Z,1492158814.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:35.228Z,1492158815.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:35.245Z,1492158815.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:35.493Z,1492158815.493 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0177.lzma.bak
2017-04-14T08:33:35.493Z,1492158815.493 [DataOverHttps](INFO): SBD MOMSN=4885563
2017-04-14T08:33:35.600Z,1492158815.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:35.640Z,1492158815.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:36.071Z,1492158816.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:36.280Z,1492158816.280 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:33:36.280Z,1492158816.280 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:33:36.280Z,1492158816.280 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:33:36.473Z,1492158816.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:40.875Z,1492158820.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:41.028Z,1492158821.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:41.416Z,1492158821.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:41.818Z,1492158821.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:42.220Z,1492158822.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:42.618Z,1492158822.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:43.019Z,1492158823.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:43.419Z,1492158823.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:43.830Z,1492158823.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:44.218Z,1492158824.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:44.615Z,1492158824.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:45.009Z,1492158825.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:45.419Z,1492158825.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:45.821Z,1492158825.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:46.215Z,1492158826.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:46.618Z,1492158826.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:47.019Z,1492158827.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:47.409Z,1492158827.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:47.845Z,1492158827.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:48.221Z,1492158828.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:48.609Z,1492158828.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:49.018Z,1492158829.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:49.421Z,1492158829.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:49.824Z,1492158829.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:50.227Z,1492158830.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:50.620Z,1492158830.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:51.020Z,1492158831.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:51.432Z,1492158831.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:51.809Z,1492158831.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:52.209Z,1492158832.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:52.710Z,1492158832.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:53.129Z,1492158833.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:53.517Z,1492158833.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:53.871Z,1492158833.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:54.279Z,1492158834.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:54.739Z,1492158834.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:55.075Z,1492158835.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:55.476Z,1492158835.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:55.882Z,1492158835.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:56.282Z,1492158836.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:56.684Z,1492158836.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:57.079Z,1492158837.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:57.475Z,1492158837.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:57.878Z,1492158837.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:58.092Z,1492158838.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:58.278Z,1492158838.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:58.678Z,1492158838.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:58.897Z,1492158838.898 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:59.069Z,1492158839.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:59.469Z,1492158839.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:33:59.869Z,1492158839.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:00.269Z,1492158840.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:00.669Z,1492158840.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:01.069Z,1492158841.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:01.473Z,1492158841.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:01.876Z,1492158841.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:02.277Z,1492158842.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:02.744Z,1492158842.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:03.069Z,1492158843.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:03.469Z,1492158843.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:03.869Z,1492158843.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:04.269Z,1492158844.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:04.724Z,1492158844.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:05.082Z,1492158845.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:05.481Z,1492158845.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:05.876Z,1492158845.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:06.277Z,1492158846.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:06.715Z,1492158846.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:07.077Z,1492158847.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:07.480Z,1492158847.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:07.876Z,1492158847.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:08.270Z,1492158848.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:08.723Z,1492158848.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:09.072Z,1492158849.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:09.484Z,1492158849.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:09.869Z,1492158849.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:10.294Z,1492158850.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:10.677Z,1492158850.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:11.074Z,1492158851.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:11.481Z,1492158851.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:11.877Z,1492158851.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:12.282Z,1492158852.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:12.677Z,1492158852.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:13.105Z,1492158853.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:13.469Z,1492158853.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:13.869Z,1492158853.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:14.269Z,1492158854.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:14.673Z,1492158854.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:15.139Z,1492158855.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:15.490Z,1492158855.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:15.873Z,1492158855.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:16.271Z,1492158856.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:16.723Z,1492158856.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:17.090Z,1492158857.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:17.522Z,1492158857.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:17.878Z,1492158857.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:18.306Z,1492158858.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:18.742Z,1492158858.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:19.075Z,1492158859.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:19.486Z,1492158859.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:19.880Z,1492158859.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:20.016Z,1492158860.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:20.271Z,1492158860.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:20.702Z,1492158860.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:20.813Z,1492158860.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:21.077Z,1492158861.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:21.216Z,1492158861.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:21.477Z,1492158861.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:21.877Z,1492158861.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:22.012Z,1492158862.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:22.280Z,1492158862.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:22.692Z,1492158862.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:22.808Z,1492158862.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:23.081Z,1492158863.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:23.212Z,1492158863.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:23.477Z,1492158863.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:23.872Z,1492158863.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:24.008Z,1492158864.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:24.278Z,1492158864.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:24.691Z,1492158864.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:24.840Z,1492158864.839 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:25.099Z,1492158865.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:25.292Z,1492158865.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:25.478Z,1492158865.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:25.890Z,1492158865.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:25.927Z,1492158865.927 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:34:25.927Z,1492158865.927 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:34:25.927Z,1492158865.927 [BPC1](ERROR): Communications Fault
2017-04-14T08:34:26.076Z,1492158866.076 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:34:26.116Z,1492158866.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:26.274Z,1492158866.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:26.682Z,1492158866.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:26.912Z,1492158866.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:27.192Z,1492158867.192 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:34:27.192Z,1492158867.192 [BPC1] No Fault, FailCount= 1
2017-04-14T08:34:27.708Z,1492158867.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:28.360Z,1492158868.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:29.156Z,1492158869.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:29.612Z,1492158869.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:30.413Z,1492158870.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:31.136Z,1492158871.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:31.933Z,1492158871.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:32.728Z,1492158872.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:33.164Z,1492158873.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:33.960Z,1492158873.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:34.756Z,1492158874.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:35.160Z,1492158875.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:35.956Z,1492158875.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:36.752Z,1492158876.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:37.156Z,1492158877.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:37.952Z,1492158877.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:38.748Z,1492158878.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:39.176Z,1492158879.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:39.972Z,1492158879.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:40.768Z,1492158880.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:41.113Z,1492158881.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:41.480Z,1492158881.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:41.552Z,1492158881.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:41.873Z,1492158881.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:42.277Z,1492158882.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:42.348Z,1492158882.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:42.686Z,1492158882.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:43.107Z,1492158883.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:43.144Z,1492158883.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:43.469Z,1492158883.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:43.560Z,1492158883.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:43.874Z,1492158883.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:44.270Z,1492158884.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:44.356Z,1492158884.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:45.073Z,1492158885.073 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:45.869Z,1492158885.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:46.664Z,1492158886.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:47.136Z,1492158887.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:47.932Z,1492158887.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:48.728Z,1492158888.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:49.132Z,1492158889.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:49.928Z,1492158889.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:50.673Z,1492158890.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:50.724Z,1492158890.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:51.079Z,1492158891.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:51.128Z,1492158891.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:51.477Z,1492158891.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:51.878Z,1492158891.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:51.924Z,1492158891.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:52.288Z,1492158892.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:52.720Z,1492158892.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:52.815Z,1492158892.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:53.086Z,1492158893.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:53.196Z,1492158893.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:53.486Z,1492158893.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:53.887Z,1492158893.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:53.994Z,1492158893.994 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:54.280Z,1492158894.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:54.682Z,1492158894.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:54.788Z,1492158894.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:55.096Z,1492158895.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:55.511Z,1492158895.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:55.560Z,1492158895.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:55.870Z,1492158895.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:56.300Z,1492158896.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:56.364Z,1492158896.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:56.674Z,1492158896.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:57.152Z,1492158897.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:57.160Z,1492158897.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:57.515Z,1492158897.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:57.628Z,1492158897.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:57.944Z,1492158897.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:58.297Z,1492158898.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:58.424Z,1492158898.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:58.719Z,1492158898.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:59.032Z,1492158899.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:59.094Z,1492158899.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:59.490Z,1492158899.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:59.828Z,1492158899.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:34:59.885Z,1492158899.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:00.282Z,1492158900.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:00.624Z,1492158900.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:00.669Z,1492158900.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:01.029Z,1492158901.029 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:01.069Z,1492158901.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:01.474Z,1492158901.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:01.824Z,1492158901.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:01.889Z,1492158901.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:02.292Z,1492158902.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:02.620Z,1492158902.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:02.676Z,1492158902.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.024Z,1492158903.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.088Z,1492158903.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.481Z,1492158903.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.820Z,1492158903.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.890Z,1492158903.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:03.901Z,1492158903.901 [PNI_TCM](ERROR): CRC does not match. Expected:0x3046 got:0x10713
2017-04-14T08:35:04.286Z,1492158904.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:04.616Z,1492158904.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:04.682Z,1492158904.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:05.020Z,1492158905.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:05.073Z,1492158905.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:05.508Z,1492158905.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:05.514Z,1492158905.514 [PNI_TCM](ERROR): CRC does not match. Expected:0x2560 got:0x55324
2017-04-14T08:35:05.816Z,1492158905.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:05.873Z,1492158905.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:06.274Z,1492158906.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:06.612Z,1492158906.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:06.717Z,1492158906.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:07.078Z,1492158907.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:07.184Z,1492158907.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:07.478Z,1492158907.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:07.874Z,1492158907.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:07.980Z,1492158907.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:08.269Z,1492158908.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:08.672Z,1492158908.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:08.776Z,1492158908.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:09.073Z,1492158909.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:09.474Z,1492158909.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:09.504Z,1492158909.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:09.886Z,1492158909.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:10.300Z,1492158910.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:10.312Z,1492158910.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:10.686Z,1492158910.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:11.072Z,1492158911.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:11.096Z,1492158911.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:11.489Z,1492158911.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:11.560Z,1492158911.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:11.886Z,1492158911.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:12.289Z,1492158912.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:12.356Z,1492158912.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:12.679Z,1492158912.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:12.996Z,1492158912.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:13.072Z,1492158913.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:13.476Z,1492158913.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:13.875Z,1492158913.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:14.285Z,1492158914.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:14.687Z,1492158914.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:15.083Z,1492158915.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:15.481Z,1492158915.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:15.878Z,1492158915.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:16.282Z,1492158916.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:16.685Z,1492158916.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:17.071Z,1492158917.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:17.487Z,1492158917.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:17.887Z,1492158917.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:18.284Z,1492158918.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:18.686Z,1492158918.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:19.080Z,1492158919.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:19.479Z,1492158919.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:19.882Z,1492158919.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:20.289Z,1492158920.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:20.714Z,1492158920.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:21.082Z,1492158921.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:21.490Z,1492158921.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:21.886Z,1492158921.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:22.270Z,1492158922.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:22.681Z,1492158922.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:23.112Z,1492158923.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:23.479Z,1492158923.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:23.883Z,1492158923.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:24.299Z,1492158924.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:24.679Z,1492158924.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:25.083Z,1492158925.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:25.479Z,1492158925.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:25.882Z,1492158925.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:26.282Z,1492158926.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:26.677Z,1492158926.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:27.077Z,1492158927.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:27.481Z,1492158927.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:27.873Z,1492158927.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:28.270Z,1492158928.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:28.681Z,1492158928.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:29.089Z,1492158929.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:29.485Z,1492158929.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:29.883Z,1492158929.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:30.269Z,1492158930.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:30.705Z,1492158930.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:31.085Z,1492158931.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:31.473Z,1492158931.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:31.882Z,1492158931.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:32.275Z,1492158932.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:32.671Z,1492158932.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:33.081Z,1492158933.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:33.477Z,1492158933.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:33.874Z,1492158933.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:34.276Z,1492158934.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:34.688Z,1492158934.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:35.082Z,1492158935.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:35.485Z,1492158935.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:35.881Z,1492158935.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:36.309Z,1492158936.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:36.669Z,1492158936.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:40.901Z,1492158940.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:41.062Z,1492158941.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:41.458Z,1492158941.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:41.865Z,1492158941.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:42.260Z,1492158942.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:42.677Z,1492158942.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:43.051Z,1492158943.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:43.464Z,1492158943.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:43.855Z,1492158943.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:44.250Z,1492158944.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:44.259Z,1492158944.259 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:35:44.259Z,1492158944.259 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:35:44.259Z,1492158944.260 [BPC1](ERROR): Communications Fault
2017-04-14T08:35:44.342Z,1492158944.342 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:35:44.673Z,1492158944.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:45.076Z,1492158945.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:45.460Z,1492158945.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:45.521Z,1492158945.522 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:35:45.521Z,1492158945.522 [BPC1] No Fault, FailCount= 1
2017-04-14T08:35:45.854Z,1492158945.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:46.257Z,1492158946.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:46.666Z,1492158946.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:47.062Z,1492158947.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:47.457Z,1492158947.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:47.864Z,1492158947.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:48.274Z,1492158948.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:48.697Z,1492158948.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:49.050Z,1492158949.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:49.469Z,1492158949.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:49.870Z,1492158949.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:50.254Z,1492158950.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:50.659Z,1492158950.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:51.062Z,1492158951.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:51.457Z,1492158951.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:51.866Z,1492158951.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:52.259Z,1492158952.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:52.649Z,1492158952.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:53.063Z,1492158953.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:53.458Z,1492158953.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:53.858Z,1492158953.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:54.284Z,1492158954.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:54.653Z,1492158954.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:55.072Z,1492158955.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:55.452Z,1492158955.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:55.850Z,1492158955.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:56.257Z,1492158956.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:56.699Z,1492158956.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:57.054Z,1492158957.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:57.458Z,1492158957.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:57.860Z,1492158957.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:58.260Z,1492158958.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:58.657Z,1492158958.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:59.060Z,1492158959.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:59.465Z,1492158959.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:35:59.853Z,1492158959.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:00.332Z,1492158960.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:00.894Z,1492158960.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:01.256Z,1492158961.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:01.674Z,1492158961.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:02.073Z,1492158962.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:02.456Z,1492158962.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:02.865Z,1492158962.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:03.270Z,1492158963.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:03.695Z,1492158963.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:04.061Z,1492158964.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:04.461Z,1492158964.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:04.865Z,1492158964.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:04.946Z,1492158964.946 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:36:04.946Z,1492158964.946 [BPC1] Communications Fault, FailCount= 2
2017-04-14T08:36:04.946Z,1492158964.946 [BPC1](ERROR): Communications Fault
2017-04-14T08:36:05.045Z,1492158965.046 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:36:05.253Z,1492158965.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:05.652Z,1492158965.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:06.065Z,1492158966.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:06.191Z,1492158966.191 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:36:06.191Z,1492158966.191 [BPC1] No Fault, FailCount= 2
2017-04-14T08:36:06.453Z,1492158966.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:06.853Z,1492158966.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:07.261Z,1492158967.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:07.671Z,1492158967.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:08.069Z,1492158968.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:08.532Z,1492158968.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:08.860Z,1492158968.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:09.263Z,1492158969.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:09.668Z,1492158969.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:09.798Z,1492158969.798 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:36:09.798Z,1492158969.798 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:36:09.798Z,1492158969.798 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:36:09.876Z,1492158969.876 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:36:10.090Z,1492158970.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:10.329Z,1492158970.329 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:36:10.329Z,1492158970.329 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:36:10.533Z,1492158970.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:10.615Z,1492158970.615 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:36:10.616Z,1492158970.616 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:36:10.616Z,1492158970.616 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:36:10.869Z,1492158970.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:11.258Z,1492158971.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:11.662Z,1492158971.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:12.097Z,1492158972.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:12.590Z,1492158972.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:12.855Z,1492158972.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:13.255Z,1492158973.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:13.653Z,1492158973.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:14.059Z,1492158974.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:14.540Z,1492158974.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:14.876Z,1492158974.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:15.343Z,1492158975.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:15.663Z,1492158975.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:16.062Z,1492158976.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:16.465Z,1492158976.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:16.866Z,1492158976.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:17.268Z,1492158977.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:17.287Z,1492158977.287 [BPC1](ERROR): Failed to parse message.
2017-04-14T08:36:17.288Z,1492158977.288 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T08:36:17.288Z,1492158977.288 [BPC1] Data Fault, FailCount= 3
2017-04-14T08:36:17.288Z,1492158977.288 [BPC1](ERROR): Data Fault
2017-04-14T08:36:17.408Z,1492158977.408 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:36:17.668Z,1492158977.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:18.058Z,1492158978.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:18.463Z,1492158978.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:18.533Z,1492158978.533 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:36:18.533Z,1492158978.533 [BPC1] No Fault, FailCount= 3
2017-04-14T08:36:18.907Z,1492158978.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:19.273Z,1492158979.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:19.656Z,1492158979.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:20.059Z,1492158980.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:20.480Z,1492158980.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:20.916Z,1492158980.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:21.269Z,1492158981.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:21.656Z,1492158981.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:22.071Z,1492158982.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:22.524Z,1492158982.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:22.856Z,1492158982.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:23.256Z,1492158983.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:23.663Z,1492158983.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:24.065Z,1492158984.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:24.535Z,1492158984.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:24.853Z,1492158984.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:25.257Z,1492158985.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:25.655Z,1492158985.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:26.063Z,1492158986.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:26.505Z,1492158986.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:26.865Z,1492158986.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:27.253Z,1492158987.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:27.661Z,1492158987.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:28.082Z,1492158988.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:28.506Z,1492158988.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:28.859Z,1492158988.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:29.266Z,1492158989.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:29.660Z,1492158989.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:30.065Z,1492158990.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:30.463Z,1492158990.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:30.860Z,1492158990.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:31.253Z,1492158991.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:31.666Z,1492158991.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:32.058Z,1492158992.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:32.463Z,1492158992.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:32.953Z,1492158992.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:33.267Z,1492158993.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:33.661Z,1492158993.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:34.069Z,1492158994.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:34.462Z,1492158994.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:34.904Z,1492158994.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:35.264Z,1492158995.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:35.661Z,1492158995.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:36.058Z,1492158996.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:36.476Z,1492158996.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:36.857Z,1492158996.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:42.081Z,1492159002.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:42.220Z,1492159002.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:42.681Z,1492159002.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:43.112Z,1492159003.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:43.458Z,1492159003.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:43.856Z,1492159003.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:44.252Z,1492159004.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:44.665Z,1492159004.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:45.056Z,1492159005.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:45.468Z,1492159005.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:45.853Z,1492159005.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:46.259Z,1492159006.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:46.666Z,1492159006.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:47.056Z,1492159007.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:47.461Z,1492159007.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:47.849Z,1492159007.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:48.269Z,1492159008.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:48.651Z,1492159008.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:49.049Z,1492159009.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:36:49.451Z,1492159009.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:38:36.766Z,1492159116.766 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:38:36.766Z,1492159116.766 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:38:36.766Z,1492159116.766 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:38:36.766Z,1492159116.766 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:38:37.169Z,1492159117.169 [Default:CheckIn:D] Stopped
2017-04-14T08:38:37.169Z,1492159117.169 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:38:41.467Z,1492159121.467 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 312.530827 min 
2017-04-14T08:38:41.467Z,1492159121.467 [Default:CheckIn:E] Stopped
2017-04-14T08:38:41.475Z,1492159121.475 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:38:41.475Z,1492159121.475 [Default:CheckIn] Stopped
2017-04-14T08:38:41.475Z,1492159121.475 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:38:41.475Z,1492159121.476 [Default:CheckIn](INFO): Running loop #44
2017-04-14T08:38:41.476Z,1492159121.476 [Default:CheckIn] Running Loop=44
2017-04-14T08:38:41.476Z,1492159121.476 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:38:41.476Z,1492159121.476 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:38:41.933Z,1492159121.933 [NAL9602](INFO): Powering up
2017-04-14T08:38:53.138Z,1492159133.138 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:39:10.318Z,1492159150.318 [NAL9602](INFO): SBD MO Status=0, MOMSN=2137, MT Status=0, MTMSN=0
2017-04-14T08:39:10.318Z,1492159150.318 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:39:10.796Z,1492159150.796 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:39:10.796Z,1492159150.796 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:39:10.796Z,1492159150.796 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:39:10.822Z,1492159150.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:39:11.226Z,1492159151.226 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:39:11.226Z,1492159151.226 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:39:11.613Z,1492159151.614 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:39:11.614Z,1492159151.614 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:39:11.614Z,1492159151.614 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:39:35.120Z,1492159175.121 [NAL9602](INFO): GPS fix at 20170414T084003: (36.802355, -121.787118)
2017-04-14T08:39:35.204Z,1492159175.204 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:39:35.204Z,1492159175.204 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:39:39.000Z,1492159180.000 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0180.lzma
2017-04-14T08:39:40.758Z,1492159180.759 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0180.lzma.bak
2017-04-14T08:39:40.761Z,1492159180.760 [DataOverHttps](INFO): SBD MOMSN=4885567
2017-04-14T08:39:45.067Z,1492159185.067 [NAL9602](INFO): Powering down
2017-04-14T08:39:50.328Z,1492159190.328 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0181.lzma
2017-04-14T08:39:51.110Z,1492159191.110 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0181.lzma.bak
2017-04-14T08:39:51.110Z,1492159191.110 [DataOverHttps](INFO): SBD MOMSN=4885570
2017-04-14T08:39:51.678Z,1492159191.678 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:39:51.678Z,1492159191.678 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:39:51.678Z,1492159191.678 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:39:56.235Z,1492159196.234 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:39:56.235Z,1492159196.235 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:39:56.235Z,1492159196.235 [BPC1](ERROR): Data Fault
2017-04-14T08:39:56.347Z,1492159196.347 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:39:57.385Z,1492159197.385 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:39:57.385Z,1492159197.385 [BPC1] No Fault, FailCount= 1
2017-04-14T08:40:32.163Z,1492159232.163 [PNI_TCM](ERROR): CRC does not match. Expected:0x61903 got:0x62447
2017-04-14T08:40:48.955Z,1492159248.955 [PNI_TCM](ERROR): CRC does not match. Expected:0x10524 got:0x16384
2017-04-14T08:41:04.950Z,1492159264.950 [PNI_TCM](ERROR): CRC does not match. Expected:0x28976 got:0x9352
2017-04-14T08:41:14.517Z,1492159274.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x21931 got:0x9349
2017-04-14T08:41:57.056Z,1492159317.056 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:41:57.056Z,1492159317.056 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:41:57.056Z,1492159317.056 [BPC1](ERROR): Data Fault
2017-04-14T08:41:57.088Z,1492159317.088 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:41:58.107Z,1492159318.107 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:41:58.107Z,1492159318.107 [BPC1] No Fault, FailCount= 1
2017-04-14T08:42:12.051Z,1492159332.050 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:42:12.051Z,1492159332.051 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:42:12.051Z,1492159332.051 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:42:12.085Z,1492159332.085 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:42:12.364Z,1492159332.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:42:12.364Z,1492159332.364 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:42:12.812Z,1492159332.812 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:42:12.813Z,1492159332.813 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:42:12.813Z,1492159332.813 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:42:31.207Z,1492159351.207 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:44:41.567Z,1492159481.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:41.959Z,1492159481.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:42.359Z,1492159482.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:42.764Z,1492159482.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:43.200Z,1492159483.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:43.562Z,1492159483.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:43.960Z,1492159483.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:44.375Z,1492159484.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:44.776Z,1492159484.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:44:52.172Z,1492159492.172 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:44:52.172Z,1492159492.172 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:44:52.172Z,1492159492.172 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:44:52.173Z,1492159492.173 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:44:52.427Z,1492159492.427 [Default:CheckIn:D] Stopped
2017-04-14T08:44:52.427Z,1492159492.427 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:44:52.000Z,1492159493.000 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 318.785124 min 
2017-04-14T08:44:53.000Z,1492159493.000 [Default:CheckIn:E] Stopped
2017-04-14T08:44:53.000Z,1492159493.000 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:44:53.000Z,1492159493.000 [Default:CheckIn] Stopped
2017-04-14T08:44:53.001Z,1492159493.000 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:44:53.001Z,1492159493.001 [Default:CheckIn](INFO): Running loop #45
2017-04-14T08:44:53.001Z,1492159493.001 [Default:CheckIn] Running Loop=45
2017-04-14T08:44:53.001Z,1492159493.001 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:44:53.001Z,1492159493.001 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:45:00.623Z,1492159500.623 [NAL9602](INFO): Powering up
2017-04-14T08:45:00.697Z,1492159500.697 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:45:00.697Z,1492159500.697 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:45:00.697Z,1492159500.697 [BPC1](ERROR): Communications Fault
2017-04-14T08:45:00.831Z,1492159500.831 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:45:01.873Z,1492159501.873 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:45:01.873Z,1492159501.873 [BPC1] No Fault, FailCount= 1
2017-04-14T08:45:11.693Z,1492159511.693 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:45:12.950Z,1492159512.950 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:45:12.951Z,1492159512.951 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:45:12.951Z,1492159512.951 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:45:12.985Z,1492159512.985 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:45:13.363Z,1492159513.363 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:45:13.379Z,1492159513.379 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:45:13.865Z,1492159513.865 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:45:13.865Z,1492159513.865 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:45:13.865Z,1492159513.865 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:45:24.922Z,1492159524.922 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T08:45:25.330Z,1492159525.330 [PNI_TCM](ERROR): CRC does not match. Expected:0x5003 got:0x59160
2017-04-14T08:45:31.746Z,1492159531.746 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:45:31.746Z,1492159531.746 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:45:31.746Z,1492159531.746 [BPC1](ERROR): Communications Fault
2017-04-14T08:45:31.868Z,1492159531.868 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:45:32.980Z,1492159532.980 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:45:32.981Z,1492159532.981 [BPC1] No Fault, FailCount= 1
2017-04-14T08:45:50.907Z,1492159550.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:51.309Z,1492159551.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:51.716Z,1492159551.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:52.095Z,1492159552.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:52.505Z,1492159552.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:52.897Z,1492159552.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:53.297Z,1492159553.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:58.091Z,1492159558.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:58.269Z,1492159558.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:58.644Z,1492159558.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:59.044Z,1492159559.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:59.444Z,1492159559.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:45:59.858Z,1492159559.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:00.251Z,1492159560.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:00.647Z,1492159560.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:01.049Z,1492159561.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:01.435Z,1492159561.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:01.849Z,1492159561.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:02.237Z,1492159562.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:02.637Z,1492159562.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:03.037Z,1492159563.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:03.442Z,1492159563.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:03.842Z,1492159563.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:04.246Z,1492159564.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:04.646Z,1492159564.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:05.045Z,1492159565.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:05.445Z,1492159565.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:05.840Z,1492159565.839 [NAL9602](INFO): SBD MO Status=2, MOMSN=2138, MT Status=2, MTMSN=0
2017-04-14T08:46:05.840Z,1492159565.840 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T08:46:05.857Z,1492159565.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:06.256Z,1492159566.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:06.642Z,1492159566.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:07.053Z,1492159567.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:07.450Z,1492159567.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:07.842Z,1492159567.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:08.246Z,1492159568.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:08.655Z,1492159568.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:09.052Z,1492159569.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:09.437Z,1492159569.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:09.852Z,1492159569.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:10.256Z,1492159570.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:10.652Z,1492159570.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:11.049Z,1492159571.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:11.454Z,1492159571.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:11.841Z,1492159571.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:12.241Z,1492159572.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:12.641Z,1492159572.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:14.247Z,1492159574.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:14.645Z,1492159574.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:15.044Z,1492159575.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:15.422Z,1492159575.422 [NAL9602](INFO): SBD MO Status=0, MOMSN=2138, MT Status=0, MTMSN=0
2017-04-14T08:46:15.422Z,1492159575.422 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:46:15.451Z,1492159575.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:15.837Z,1492159575.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:16.259Z,1492159576.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:16.632Z,1492159576.632 [NAL9602](INFO): GPS fix at 20170414T084645: (36.802347, -121.787137)
2017-04-14T08:46:16.649Z,1492159576.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:16.715Z,1492159576.715 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:46:16.715Z,1492159576.715 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:46:17.050Z,1492159577.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:17.451Z,1492159577.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:17.846Z,1492159577.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:21.600Z,1492159581.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:21.704Z,1492159581.704 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0184.lzma
2017-04-14T08:46:21.728Z,1492159581.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:22.116Z,1492159582.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:22.486Z,1492159582.486 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0184.lzma.bak
2017-04-14T08:46:22.486Z,1492159582.486 [DataOverHttps](INFO): SBD MOMSN=4885574
2017-04-14T08:46:22.526Z,1492159582.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:22.936Z,1492159582.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:23.315Z,1492159583.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:26.814Z,1492159586.814 [NAL9602](INFO): Powering down
2017-04-14T08:46:26.834Z,1492159586.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:27.006Z,1492159587.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:27.405Z,1492159587.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:27.809Z,1492159587.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:28.212Z,1492159588.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:28.610Z,1492159588.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:32.180Z,1492159592.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:32.278Z,1492159592.278 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0185.lzma
2017-04-14T08:46:32.305Z,1492159592.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:32.697Z,1492159592.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:33.074Z,1492159593.074 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0185.lzma.bak
2017-04-14T08:46:33.074Z,1492159593.074 [DataOverHttps](INFO): SBD MOMSN=4885577
2017-04-14T08:46:33.097Z,1492159593.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:33.544Z,1492159593.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:33.632Z,1492159593.632 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:46:33.632Z,1492159593.632 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:46:33.632Z,1492159593.632 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:46:33.904Z,1492159593.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:39.687Z,1492159599.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:39.844Z,1492159599.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:40.230Z,1492159600.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:40.645Z,1492159600.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:41.039Z,1492159601.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:41.433Z,1492159601.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:41.825Z,1492159601.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:42.229Z,1492159602.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:42.623Z,1492159602.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:43.030Z,1492159603.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:43.433Z,1492159603.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:43.826Z,1492159603.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:44.226Z,1492159604.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:44.629Z,1492159604.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:45.028Z,1492159605.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:45.425Z,1492159605.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:45.834Z,1492159605.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:46.233Z,1492159606.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:46.633Z,1492159606.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:47.041Z,1492159607.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:47.433Z,1492159607.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:47.825Z,1492159607.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:48.233Z,1492159608.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:48.633Z,1492159608.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:49.033Z,1492159609.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:49.428Z,1492159609.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:49.825Z,1492159609.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:50.237Z,1492159610.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:50.637Z,1492159610.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:51.038Z,1492159611.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:51.448Z,1492159611.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:51.826Z,1492159611.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:52.252Z,1492159612.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:52.628Z,1492159612.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:53.043Z,1492159613.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:53.495Z,1492159613.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:53.849Z,1492159613.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:54.236Z,1492159614.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:54.630Z,1492159614.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:55.025Z,1492159615.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:55.473Z,1492159615.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:55.833Z,1492159615.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:56.229Z,1492159616.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:56.628Z,1492159616.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:57.032Z,1492159617.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:57.453Z,1492159617.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:57.826Z,1492159617.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:58.229Z,1492159618.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:58.623Z,1492159618.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:59.034Z,1492159619.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:59.429Z,1492159619.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:46:59.833Z,1492159619.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:00.246Z,1492159620.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:00.625Z,1492159620.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:01.024Z,1492159621.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:01.429Z,1492159621.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:01.825Z,1492159621.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:02.232Z,1492159622.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:02.628Z,1492159622.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:03.029Z,1492159623.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:03.429Z,1492159623.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:03.833Z,1492159623.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:04.236Z,1492159624.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:04.637Z,1492159624.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:05.029Z,1492159625.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:05.496Z,1492159625.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:05.871Z,1492159625.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:06.281Z,1492159626.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:06.627Z,1492159626.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:07.032Z,1492159627.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:07.520Z,1492159627.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:07.827Z,1492159627.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:08.229Z,1492159628.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:08.662Z,1492159628.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:09.027Z,1492159629.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:09.509Z,1492159629.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:09.837Z,1492159629.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:10.230Z,1492159630.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:10.632Z,1492159630.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:11.037Z,1492159631.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:11.503Z,1492159631.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:11.826Z,1492159631.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:12.232Z,1492159632.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:12.625Z,1492159632.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:13.025Z,1492159633.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:13.429Z,1492159633.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:13.830Z,1492159633.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:14.230Z,1492159634.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:14.641Z,1492159634.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:15.035Z,1492159635.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:15.433Z,1492159635.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:15.833Z,1492159635.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:16.230Z,1492159636.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:16.625Z,1492159636.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:17.025Z,1492159637.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:17.426Z,1492159637.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:17.886Z,1492159637.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:18.261Z,1492159638.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:18.633Z,1492159638.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:19.056Z,1492159639.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:19.491Z,1492159639.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:19.825Z,1492159639.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:20.234Z,1492159640.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:20.632Z,1492159640.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:21.037Z,1492159641.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:21.477Z,1492159641.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:21.826Z,1492159641.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:22.235Z,1492159642.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:22.626Z,1492159642.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:23.025Z,1492159643.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:23.481Z,1492159643.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:23.830Z,1492159643.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:24.230Z,1492159644.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:24.626Z,1492159644.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:25.033Z,1492159645.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:25.505Z,1492159645.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:25.838Z,1492159645.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:26.233Z,1492159646.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:26.632Z,1492159646.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:27.037Z,1492159647.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:27.425Z,1492159647.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:27.834Z,1492159647.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:28.235Z,1492159648.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:28.625Z,1492159648.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:29.027Z,1492159649.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:29.482Z,1492159649.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:29.938Z,1492159649.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:30.252Z,1492159650.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:30.686Z,1492159650.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:31.053Z,1492159651.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:31.486Z,1492159651.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:31.919Z,1492159651.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:32.244Z,1492159652.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:32.641Z,1492159652.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:33.042Z,1492159653.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:33.462Z,1492159653.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:33.839Z,1492159653.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:34.246Z,1492159654.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:38.644Z,1492159658.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:38.870Z,1492159658.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:39.251Z,1492159659.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:39.685Z,1492159659.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:40.069Z,1492159660.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:40.457Z,1492159660.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:40.850Z,1492159660.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:41.249Z,1492159661.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:41.653Z,1492159661.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:42.061Z,1492159662.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:42.456Z,1492159662.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:42.867Z,1492159662.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:43.268Z,1492159663.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:43.649Z,1492159663.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:44.049Z,1492159664.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:44.449Z,1492159664.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:44.850Z,1492159664.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:45.261Z,1492159665.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:45.661Z,1492159665.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:46.062Z,1492159666.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:46.458Z,1492159666.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:46.860Z,1492159666.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:47.267Z,1492159667.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:47.649Z,1492159667.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:48.064Z,1492159668.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:48.461Z,1492159668.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:48.866Z,1492159668.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:49.262Z,1492159669.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:49.649Z,1492159669.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:50.049Z,1492159670.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:50.454Z,1492159670.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:50.861Z,1492159670.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:51.256Z,1492159671.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:51.658Z,1492159671.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:52.061Z,1492159672.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:52.484Z,1492159672.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:52.846Z,1492159672.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:53.249Z,1492159673.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:53.657Z,1492159673.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:54.058Z,1492159674.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:54.458Z,1492159674.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:54.863Z,1492159674.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:55.268Z,1492159675.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:55.656Z,1492159675.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:56.076Z,1492159676.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:56.449Z,1492159676.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:56.856Z,1492159676.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:57.257Z,1492159677.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:57.662Z,1492159677.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:58.061Z,1492159678.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:58.466Z,1492159678.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:58.857Z,1492159678.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:59.260Z,1492159679.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:47:59.652Z,1492159679.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:00.049Z,1492159680.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:00.449Z,1492159680.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:00.849Z,1492159680.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:01.247Z,1492159681.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:01.655Z,1492159681.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:02.058Z,1492159682.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:02.461Z,1492159682.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:02.859Z,1492159682.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:03.264Z,1492159683.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:03.649Z,1492159683.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:04.057Z,1492159684.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:04.461Z,1492159684.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:04.849Z,1492159684.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:05.259Z,1492159685.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:05.676Z,1492159685.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:06.049Z,1492159686.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:06.455Z,1492159686.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:06.861Z,1492159686.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:07.259Z,1492159687.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:07.656Z,1492159687.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:08.052Z,1492159688.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:08.467Z,1492159688.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:08.849Z,1492159688.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:09.257Z,1492159689.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:09.659Z,1492159689.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:10.072Z,1492159690.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:10.461Z,1492159690.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:10.858Z,1492159690.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:11.261Z,1492159691.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:11.678Z,1492159691.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:12.049Z,1492159692.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:12.449Z,1492159692.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:12.849Z,1492159692.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:13.266Z,1492159693.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:13.664Z,1492159693.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:14.060Z,1492159694.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:14.130Z,1492159694.130 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:48:14.130Z,1492159694.130 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:48:14.130Z,1492159694.130 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:48:14.173Z,1492159694.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:48:14.473Z,1492159694.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:14.557Z,1492159694.557 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:48:14.557Z,1492159694.557 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:48:14.849Z,1492159694.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:14.897Z,1492159694.897 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:48:14.898Z,1492159694.898 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:48:14.898Z,1492159694.898 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:48:15.249Z,1492159695.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:15.663Z,1492159695.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:16.090Z,1492159696.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:16.458Z,1492159696.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:16.873Z,1492159696.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:17.274Z,1492159697.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:17.652Z,1492159697.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:18.067Z,1492159698.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:18.458Z,1492159698.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:18.861Z,1492159698.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:19.266Z,1492159699.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:19.672Z,1492159699.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:20.063Z,1492159700.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:20.456Z,1492159700.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:20.857Z,1492159700.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:21.259Z,1492159701.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:21.658Z,1492159701.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:22.058Z,1492159702.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:22.496Z,1492159702.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:22.863Z,1492159702.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:23.252Z,1492159703.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:23.670Z,1492159703.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:24.059Z,1492159704.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:24.460Z,1492159704.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:24.855Z,1492159704.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:25.249Z,1492159705.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:25.668Z,1492159705.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:26.052Z,1492159706.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:26.457Z,1492159706.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:26.854Z,1492159706.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:27.257Z,1492159707.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:27.659Z,1492159707.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:28.050Z,1492159708.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:28.449Z,1492159708.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:28.853Z,1492159708.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:29.249Z,1492159709.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:29.649Z,1492159709.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:30.049Z,1492159710.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:30.449Z,1492159710.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:30.849Z,1492159710.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:31.253Z,1492159711.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:31.683Z,1492159711.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:32.049Z,1492159712.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:32.465Z,1492159712.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:32.850Z,1492159712.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:33.251Z,1492159713.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:33.665Z,1492159713.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:34.053Z,1492159714.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:34.466Z,1492159714.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:38.198Z,1492159718.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:38.418Z,1492159718.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:38.765Z,1492159718.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:39.182Z,1492159719.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:39.565Z,1492159719.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:39.969Z,1492159719.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:40.369Z,1492159720.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:40.789Z,1492159720.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:41.165Z,1492159721.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:41.565Z,1492159721.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:41.968Z,1492159721.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:42.371Z,1492159722.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:42.769Z,1492159722.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:48:43.183Z,1492159723.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:50:02.514Z,1492159802.514 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:50:03.309Z,1492159803.309 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:50:16.524Z,1492159816.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:50:17.320Z,1492159817.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:50:51.951Z,1492159851.951 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T08:50:51.952Z,1492159851.952 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:50:51.952Z,1492159851.952 [BPC1](ERROR): Data Fault
2017-04-14T08:50:52.100Z,1492159852.100 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:50:53.306Z,1492159853.306 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:50:53.306Z,1492159853.306 [BPC1] No Fault, FailCount= 1
2017-04-14T08:51:00.072Z,1492159860.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:51:00.868Z,1492159860.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:51:14.028Z,1492159874.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:51:14.432Z,1492159874.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:51:15.179Z,1492159875.179 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:51:15.179Z,1492159875.180 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:51:15.180Z,1492159875.180 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:51:15.226Z,1492159875.226 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:51:15.633Z,1492159875.633 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:51:15.633Z,1492159875.634 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:51:16.022Z,1492159876.022 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:51:16.022Z,1492159876.022 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:51:16.022Z,1492159876.022 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:51:28.388Z,1492159888.388 [PNI_TCM](ERROR): CRC does not match. Expected:0x12856 got:0x45592
2017-04-14T08:51:34.465Z,1492159894.465 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:51:34.465Z,1492159894.466 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:51:34.466Z,1492159894.466 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:51:34.466Z,1492159894.466 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:51:34.928Z,1492159894.928 [Default:CheckIn:D] Stopped
2017-04-14T08:51:34.928Z,1492159894.928 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:51:35.214Z,1492159895.214 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 325.493490 min 
2017-04-14T08:51:35.214Z,1492159895.214 [Default:CheckIn:E] Stopped
2017-04-14T08:51:35.214Z,1492159895.214 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:51:35.214Z,1492159895.214 [Default:CheckIn] Stopped
2017-04-14T08:51:35.214Z,1492159895.214 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:51:35.215Z,1492159895.215 [Default:CheckIn](INFO): Running loop #46
2017-04-14T08:51:35.215Z,1492159895.215 [Default:CheckIn] Running Loop=46
2017-04-14T08:51:35.219Z,1492159895.219 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:51:35.219Z,1492159895.219 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:51:40.535Z,1492159900.535 [NAL9602](INFO): Powering up
2017-04-14T08:51:51.337Z,1492159911.337 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:52:06.974Z,1492159926.974 [NAL9602](INFO): SBD MO Status=0, MOMSN=2139, MT Status=0, MTMSN=0
2017-04-14T08:52:06.974Z,1492159926.974 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:52:19.341Z,1492159939.341 [NAL9602](INFO): GPS fix at 20170414T085248: (36.802271, -121.787148)
2017-04-14T08:52:19.421Z,1492159939.421 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:52:19.422Z,1492159939.422 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:52:24.878Z,1492159944.878 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0188.lzma
2017-04-14T08:52:25.642Z,1492159945.642 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0188.lzma.bak
2017-04-14T08:52:25.642Z,1492159945.642 [DataOverHttps](INFO): SBD MOMSN=4885581
2017-04-14T08:52:31.637Z,1492159951.637 [NAL9602](INFO): Powering down
2017-04-14T08:52:31.748Z,1492159951.748 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T08:52:38.068Z,1492159958.068 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0189.lzma
2017-04-14T08:52:38.822Z,1492159958.822 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0189.lzma.bak
2017-04-14T08:52:38.822Z,1492159958.822 [DataOverHttps](INFO): SBD MOMSN=4885584
2017-04-14T08:52:39.310Z,1492159959.310 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:52:39.310Z,1492159959.310 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:52:39.310Z,1492159959.310 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:53:10.808Z,1492159990.808 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T08:53:10.808Z,1492159990.808 [BPC1] Data Fault, FailCount= 1
2017-04-14T08:53:10.808Z,1492159990.808 [BPC1](ERROR): Data Fault
2017-04-14T08:53:10.839Z,1492159990.839 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T08:53:12.073Z,1492159992.073 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:53:12.073Z,1492159992.073 [BPC1] No Fault, FailCount= 1
2017-04-14T08:53:16.180Z,1492159996.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:16.979Z,1492159996.979 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:17.464Z,1492159997.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:18.260Z,1492159998.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:19.056Z,1492159999.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:19.785Z,1492159999.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:20.581Z,1492160000.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:30.164Z,1492160010.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:30.964Z,1492160010.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:31.396Z,1492160011.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:32.192Z,1492160012.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:32.988Z,1492160012.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:33.769Z,1492160013.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:34.564Z,1492160014.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:35.361Z,1492160015.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:35.772Z,1492160015.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:36.568Z,1492160016.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:37.328Z,1492160017.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:38.124Z,1492160018.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:38.920Z,1492160018.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:39.341Z,1492160019.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:40.136Z,1492160020.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:40.933Z,1492160020.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:41.340Z,1492160021.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:42.136Z,1492160022.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:42.932Z,1492160022.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:43.336Z,1492160023.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:44.133Z,1492160024.133 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:44.934Z,1492160024.934 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:45.380Z,1492160025.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:46.177Z,1492160026.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:46.974Z,1492160026.974 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:47.768Z,1492160027.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:48.172Z,1492160028.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:48.968Z,1492160028.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:49.708Z,1492160029.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:50.504Z,1492160030.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:51.292Z,1492160031.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:52.088Z,1492160032.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:52.884Z,1492160032.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:53.308Z,1492160033.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:54.105Z,1492160034.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:54.900Z,1492160034.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:55.304Z,1492160035.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:56.100Z,1492160036.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:56.896Z,1492160036.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:57.301Z,1492160037.301 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:58.096Z,1492160038.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:58.893Z,1492160038.893 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:53:59.360Z,1492160039.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:00.156Z,1492160040.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:00.952Z,1492160040.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:01.748Z,1492160041.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:02.152Z,1492160042.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:02.948Z,1492160042.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:03.744Z,1492160043.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:04.148Z,1492160044.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:04.944Z,1492160044.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:05.350Z,1492160045.350 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:16.388Z,1492160056.388 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:54:16.388Z,1492160056.388 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T08:54:16.388Z,1492160056.388 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:54:16.426Z,1492160056.426 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:54:16.781Z,1492160056.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:54:16.781Z,1492160056.781 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T08:54:17.171Z,1492160057.171 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:54:17.172Z,1492160057.172 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:54:17.172Z,1492160057.172 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:54:28.136Z,1492160068.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:28.933Z,1492160068.933 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:42.140Z,1492160082.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:54:42.936Z,1492160082.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:55:17.666Z,1492160117.666 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:55:17.666Z,1492160117.666 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:55:17.666Z,1492160117.667 [BPC1](ERROR): Communications Fault
2017-04-14T08:55:17.726Z,1492160117.726 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:55:18.995Z,1492160118.995 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:55:18.995Z,1492160118.995 [BPC1] No Fault, FailCount= 1
2017-04-14T08:56:05.996Z,1492160165.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:06.792Z,1492160166.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:19.960Z,1492160179.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:20.756Z,1492160180.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:41.884Z,1492160201.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:42.681Z,1492160202.681 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:43.088Z,1492160203.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:43.884Z,1492160203.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:44.680Z,1492160204.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:45.084Z,1492160205.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:45.880Z,1492160205.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:46.676Z,1492160206.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:47.180Z,1492160207.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:47.976Z,1492160207.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:48.772Z,1492160208.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:49.564Z,1492160209.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:50.360Z,1492160210.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:51.156Z,1492160211.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:51.560Z,1492160211.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:52.356Z,1492160212.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:53.124Z,1492160213.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:53.920Z,1492160213.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:54.716Z,1492160214.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:55.163Z,1492160215.163 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:55.960Z,1492160215.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:56.756Z,1492160216.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:57.160Z,1492160217.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:57.956Z,1492160217.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:58.752Z,1492160218.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:59.156Z,1492160219.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:56:59.952Z,1492160219.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:00.748Z,1492160220.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:01.156Z,1492160221.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:01.952Z,1492160221.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:02.748Z,1492160222.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:03.516Z,1492160223.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:04.312Z,1492160224.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:04.657Z,1492160224.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:05.058Z,1492160225.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:05.108Z,1492160225.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:05.474Z,1492160225.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:05.512Z,1492160225.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:05.879Z,1492160225.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:06.249Z,1492160226.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:06.308Z,1492160226.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:06.653Z,1492160226.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:06.952Z,1492160226.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:07.070Z,1492160227.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:07.465Z,1492160227.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:07.879Z,1492160227.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:17.491Z,1492160237.490 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T08:57:17.491Z,1492160237.491 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T08:57:17.491Z,1492160237.491 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T08:57:17.520Z,1492160237.520 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T08:57:17.900Z,1492160237.899 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T08:57:17.900Z,1492160237.900 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T08:57:18.281Z,1492160238.281 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T08:57:18.281Z,1492160238.281 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T08:57:18.282Z,1492160238.282 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T08:57:21.453Z,1492160241.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:21.858Z,1492160241.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:22.258Z,1492160242.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:23.864Z,1492160243.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:24.253Z,1492160244.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:24.678Z,1492160244.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:25.045Z,1492160245.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:25.536Z,1492160245.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:25.853Z,1492160245.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:26.298Z,1492160246.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:26.664Z,1492160246.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:27.052Z,1492160247.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:29.141Z,1492160249.141 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:29.936Z,1492160249.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:31.042Z,1492160251.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:31.466Z,1492160251.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:31.848Z,1492160251.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:33.450Z,1492160253.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:33.850Z,1492160253.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:34.252Z,1492160254.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:39.880Z,1492160259.880 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T08:57:39.881Z,1492160259.881 [Default:CheckIn:C.Wait] Stopped
2017-04-14T08:57:39.881Z,1492160259.881 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T08:57:39.881Z,1492160259.881 [Default:CheckIn:D] Running Loop=1
2017-04-14T08:57:40.284Z,1492160260.284 [Default:CheckIn:D] Stopped
2017-04-14T08:57:40.284Z,1492160260.284 [Default:CheckIn:E] Running Loop=1
2017-04-14T08:57:40.741Z,1492160260.741 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 331.582747 min 
2017-04-14T08:57:40.741Z,1492160260.741 [Default:CheckIn:E] Stopped
2017-04-14T08:57:40.741Z,1492160260.741 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T08:57:40.741Z,1492160260.741 [Default:CheckIn] Stopped
2017-04-14T08:57:40.741Z,1492160260.741 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T08:57:40.742Z,1492160260.741 [Default:CheckIn](INFO): Running loop #47
2017-04-14T08:57:40.742Z,1492160260.742 [Default:CheckIn] Running Loop=47
2017-04-14T08:57:40.742Z,1492160260.742 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T08:57:40.742Z,1492160260.742 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T08:57:43.088Z,1492160263.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:43.884Z,1492160263.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T08:57:45.690Z,1492160265.690 [NAL9602](INFO): Powering up
2017-04-14T08:57:45.746Z,1492160265.746 [BPC1](ERROR): Failed to receive battery data
2017-04-14T08:57:45.747Z,1492160265.747 [BPC1] Communications Fault, FailCount= 1
2017-04-14T08:57:45.747Z,1492160265.747 [BPC1](ERROR): Communications Fault
2017-04-14T08:57:45.870Z,1492160265.870 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T08:57:47.052Z,1492160267.052 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T08:57:47.052Z,1492160267.052 [BPC1] No Fault, FailCount= 1
2017-04-14T08:57:56.877Z,1492160276.877 [NAL9602](INFO): NAL9602 initialized
2017-04-14T08:58:11.326Z,1492160291.326 [PNI_TCM](ERROR): CRC does not match. Expected:0x16975 got:0x26375
2017-04-14T08:58:15.282Z,1492160295.282 [NAL9602](INFO): SBD MO Status=0, MOMSN=2140, MT Status=0, MTMSN=0
2017-04-14T08:58:15.282Z,1492160295.282 [NAL9602](INFO): No messages in MT queue
2017-04-14T08:58:16.122Z,1492160296.122 [PNI_TCM](ERROR): CRC does not match. Expected:0x6471 got:0x136
2017-04-14T08:58:26.517Z,1492160306.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T08:58:31.289Z,1492160311.289 [NAL9602](INFO): GPS fix at 20170414T085901: (36.802359, -121.787076)
2017-04-14T08:58:31.401Z,1492160311.401 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T08:58:31.401Z,1492160311.401 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T08:58:36.728Z,1492160316.728 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0192.lzma
2017-04-14T08:58:37.498Z,1492160317.498 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0192.lzma.bak
2017-04-14T08:58:37.498Z,1492160317.498 [DataOverHttps](INFO): SBD MOMSN=4885588
2017-04-14T08:58:42.699Z,1492160322.699 [NAL9602](INFO): Powering down
2017-04-14T08:58:48.220Z,1492160328.220 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0193.lzma
2017-04-14T08:58:48.994Z,1492160328.994 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0193.lzma.bak
2017-04-14T08:58:48.994Z,1492160328.994 [DataOverHttps](INFO): SBD MOMSN=4885591
2017-04-14T08:58:49.517Z,1492160329.517 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T08:58:49.517Z,1492160329.517 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T08:58:49.517Z,1492160329.517 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T08:58:56.054Z,1492160336.054 [PNI_TCM](ERROR): CRC does not match. Expected:0x37114 got:0x37
2017-04-14T08:59:05.253Z,1492160345.253 [PNI_TCM](ERROR): CRC does not match. Expected:0x6542 got:0x43800
2017-04-14T08:59:06.517Z,1492160346.517 [PNI_TCM](ERROR): CRC does not match. Expected:0x60911 got:0x1857
2017-04-14T09:00:18.539Z,1492160418.539 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:00:18.540Z,1492160418.540 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:00:18.540Z,1492160418.540 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:00:18.574Z,1492160418.574 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:00:18.973Z,1492160418.973 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:00:18.973Z,1492160418.973 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:00:19.340Z,1492160419.340 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:00:19.340Z,1492160419.341 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:00:19.341Z,1492160419.341 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:01:25.443Z,1492160485.443 [PNI_TCM](ERROR): CRC does not match. Expected:0x1521 got:0x46288
2017-04-14T09:02:32.137Z,1492160552.137 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:03:19.735Z,1492160599.735 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:03:19.735Z,1492160599.735 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:03:19.735Z,1492160599.735 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:03:19.769Z,1492160599.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:03:20.145Z,1492160600.145 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:03:20.145Z,1492160600.145 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:03:20.536Z,1492160600.536 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:03:20.537Z,1492160600.537 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:03:20.537Z,1492160600.537 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:03:24.899Z,1492160604.899 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T09:03:24.899Z,1492160604.899 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:03:24.899Z,1492160604.899 [BPC1](ERROR): Data Fault
2017-04-14T09:03:24.997Z,1492160604.997 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:03:26.137Z,1492160606.137 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:03:26.137Z,1492160606.137 [BPC1] No Fault, FailCount= 1
2017-04-14T09:03:50.162Z,1492160630.162 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:03:50.163Z,1492160630.163 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:03:50.163Z,1492160630.163 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:03:50.163Z,1492160630.163 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:03:50.563Z,1492160630.563 [Default:CheckIn:D] Stopped
2017-04-14T09:03:50.563Z,1492160630.563 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:03:56.588Z,1492160636.588 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 337.753939 min 
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn:E] Stopped
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn] Stopped
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn](INFO): Running loop #48
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn] Running Loop=48
2017-04-14T09:03:56.589Z,1492160636.589 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:03:56.590Z,1492160636.589 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:03:57.152Z,1492160637.152 [NAL9602](INFO): Powering up
2017-04-14T09:04:08.341Z,1492160648.341 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:04:22.743Z,1492160662.743 [NAL9602](INFO): SBD MO Status=0, MOMSN=2141, MT Status=0, MTMSN=0
2017-04-14T09:04:22.743Z,1492160662.743 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:04:29.945Z,1492160669.945 [NAL9602](INFO): GPS fix at 20170414T090500: (36.802369, -121.787148)
2017-04-14T09:04:30.016Z,1492160670.016 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:04:30.016Z,1492160670.016 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:04:35.276Z,1492160675.276 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20170414T032153/Courier0196.lzma
2017-04-14T09:04:36.066Z,1492160676.066 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0196.lzma.bak
2017-04-14T09:04:36.066Z,1492160676.066 [DataOverHttps](INFO): SBD MOMSN=4885595
2017-04-14T09:04:40.563Z,1492160680.563 [NAL9602](INFO): Powering down
2017-04-14T09:04:46.096Z,1492160686.096 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0197.lzma
2017-04-14T09:04:46.862Z,1492160686.862 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0197.lzma.bak
2017-04-14T09:04:46.862Z,1492160686.862 [DataOverHttps](INFO): SBD MOMSN=4885598
2017-04-14T09:04:47.339Z,1492160687.339 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:04:47.339Z,1492160687.339 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:04:47.339Z,1492160687.339 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:05:01.289Z,1492160701.289 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:05:01.290Z,1492160701.290 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:05:01.290Z,1492160701.290 [BPC1](ERROR): Communications Fault
2017-04-14T09:05:01.366Z,1492160701.366 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:05:02.553Z,1492160702.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:05:02.553Z,1492160702.553 [BPC1] No Fault, FailCount= 1
2017-04-14T09:06:08.975Z,1492160768.975 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T09:06:20.612Z,1492160780.612 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:06:20.612Z,1492160780.612 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:06:20.612Z,1492160780.612 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:06:20.626Z,1492160780.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:06:21.019Z,1492160781.019 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:06:21.019Z,1492160781.019 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:06:21.410Z,1492160781.410 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:06:21.411Z,1492160781.411 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:06:21.411Z,1492160781.411 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:07:18.492Z,1492160838.492 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-04-14T09:07:23.295Z,1492160843.295 [PNI_TCM](ERROR): CRC does not match. Expected:0x52949 got:0x32768
2017-04-14T09:07:24.881Z,1492160844.881 [PNI_TCM](ERROR): CRC does not match. Expected:0x25236 got:0x9357
2017-04-14T09:07:56.218Z,1492160876.218 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:07:56.218Z,1492160876.218 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:07:56.219Z,1492160876.218 [BPC1](ERROR): Communications Fault
2017-04-14T09:07:56.347Z,1492160876.347 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:07:57.270Z,1492160877.270 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:07:57.270Z,1492160877.270 [BPC1] No Fault, FailCount= 1
2017-04-14T09:08:00.810Z,1492160880.810 [PNI_TCM](ERROR): CRC does not match. Expected:0x42910 got:0x52177
2017-04-14T09:09:21.544Z,1492160961.544 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:09:21.544Z,1492160961.544 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:09:21.544Z,1492160961.544 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:09:21.616Z,1492160961.616 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:09:21.914Z,1492160961.914 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:09:21.914Z,1492160961.914 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:09:22.295Z,1492160962.295 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:09:22.296Z,1492160962.296 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:09:22.296Z,1492160962.296 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:09:47.841Z,1492160987.841 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:09:47.841Z,1492160987.841 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:09:47.841Z,1492160987.841 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:09:47.841Z,1492160987.842 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:09:48.242Z,1492160988.242 [Default:CheckIn:D] Stopped
2017-04-14T09:09:48.242Z,1492160988.242 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:09:48.678Z,1492160988.678 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 343.715397 min 
2017-04-14T09:09:48.678Z,1492160988.678 [Default:CheckIn:E] Stopped
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn] Stopped
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn](INFO): Running loop #49
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn] Running Loop=49
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:09:48.679Z,1492160988.679 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:09:52.989Z,1492160992.989 [NAL9602](INFO): Powering up
2017-04-14T09:10:03.962Z,1492161003.962 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:10:14.750Z,1492161014.750 [NAL9602](INFO): SBD MO Status=0, MOMSN=2142, MT Status=0, MTMSN=0
2017-04-14T09:10:14.750Z,1492161014.750 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:10:49.189Z,1492161049.189 [NAL9602](INFO): GPS fix at 20170414T091120: (36.802327, -121.787119)
2017-04-14T09:10:49.424Z,1492161049.424 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:10:49.424Z,1492161049.424 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:10:55.658Z,1492161055.658 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0200.lzma
2017-04-14T09:10:56.446Z,1492161056.446 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0200.lzma.bak
2017-04-14T09:10:56.446Z,1492161056.446 [DataOverHttps](INFO): SBD MOMSN=4885602
2017-04-14T09:11:00.620Z,1492161060.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:11:01.416Z,1492161061.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:11:01.565Z,1492161061.565 [NAL9602](INFO): Powering down
2017-04-14T09:11:08.949Z,1492161068.949 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0201.lzma
2017-04-14T09:11:09.760Z,1492161069.760 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0201.lzma.bak
2017-04-14T09:11:09.761Z,1492161069.761 [DataOverHttps](INFO): SBD MOMSN=4885606
2017-04-14T09:11:10.283Z,1492161070.283 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:11:10.283Z,1492161070.283 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:11:10.283Z,1492161070.283 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:11:14.588Z,1492161074.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:11:15.384Z,1492161075.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:12:22.536Z,1492161142.536 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:12:22.536Z,1492161142.536 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:12:22.536Z,1492161142.536 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:12:22.592Z,1492161142.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:12:22.906Z,1492161142.906 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:12:22.906Z,1492161142.906 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:12:23.368Z,1492161143.368 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:12:23.369Z,1492161143.369 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:12:23.369Z,1492161143.369 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:12:23.754Z,1492161143.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:12:24.548Z,1492161144.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:12:32.143Z,1492161152.143 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:12:37.792Z,1492161157.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:12:38.588Z,1492161158.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:16.664Z,1492161196.664 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:13:16.664Z,1492161196.664 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:13:16.664Z,1492161196.664 [BPC1](ERROR): Communications Fault
2017-04-14T09:13:16.741Z,1492161196.741 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:13:17.903Z,1492161197.903 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:13:17.903Z,1492161197.903 [BPC1] No Fault, FailCount= 1
2017-04-14T09:13:21.980Z,1492161201.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:22.776Z,1492161202.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:35.892Z,1492161215.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:36.688Z,1492161216.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:48.372Z,1492161228.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:49.169Z,1492161229.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:49.916Z,1492161229.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:50.712Z,1492161230.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:51.508Z,1492161231.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:51.912Z,1492161231.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:52.267Z,1492161232.267 [PNI_TCM](ERROR): CRC does not match. Expected:0x16560 got:0x55065
2017-04-14T09:13:52.708Z,1492161232.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:53.408Z,1492161233.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:54.204Z,1492161234.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:55.002Z,1492161235.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:55.408Z,1492161235.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:56.204Z,1492161236.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:57.000Z,1492161237.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:57.432Z,1492161237.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:58.229Z,1492161238.229 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:59.024Z,1492161239.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:13:59.429Z,1492161239.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:00.224Z,1492161240.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:01.021Z,1492161241.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:01.516Z,1492161241.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:02.312Z,1492161242.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:03.108Z,1492161243.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:03.880Z,1492161243.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:04.676Z,1492161244.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:05.472Z,1492161245.473 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:05.876Z,1492161245.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:06.672Z,1492161246.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:07.364Z,1492161247.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:07.867Z,1492161247.867 [PNI_TCM](ERROR): CRC does not match. Expected:0x8336 got:0x31024
2017-04-14T09:14:08.160Z,1492161248.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:08.956Z,1492161248.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:09.392Z,1492161249.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:10.188Z,1492161250.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:10.984Z,1492161250.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:11.388Z,1492161251.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:12.184Z,1492161252.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:12.980Z,1492161252.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:13.384Z,1492161253.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:14.180Z,1492161254.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:14.978Z,1492161254.978 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:15.512Z,1492161255.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:16.308Z,1492161256.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:17.104Z,1492161257.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:17.820Z,1492161257.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:18.616Z,1492161258.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:19.414Z,1492161259.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:19.820Z,1492161259.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:20.619Z,1492161260.619 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:21.360Z,1492161261.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:22.156Z,1492161262.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:22.952Z,1492161262.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:23.384Z,1492161263.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:24.201Z,1492161264.201 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:24.996Z,1492161264.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:25.440Z,1492161265.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:26.236Z,1492161266.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:27.032Z,1492161267.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:27.436Z,1492161267.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:28.232Z,1492161268.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:29.028Z,1492161269.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:29.504Z,1492161269.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:30.300Z,1492161270.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:31.098Z,1492161271.098 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:31.829Z,1492161271.829 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:32.624Z,1492161272.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:33.420Z,1492161273.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:33.824Z,1492161273.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:34.620Z,1492161274.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:35.418Z,1492161275.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:35.824Z,1492161275.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:36.620Z,1492161276.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:37.372Z,1492161277.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:38.168Z,1492161278.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:38.964Z,1492161278.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:39.368Z,1492161279.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:40.164Z,1492161280.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:40.960Z,1492161280.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:41.364Z,1492161281.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:42.160Z,1492161282.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:42.958Z,1492161282.958 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:43.420Z,1492161283.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:44.216Z,1492161284.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:45.012Z,1492161285.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:45.785Z,1492161285.785 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:46.581Z,1492161286.581 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:46.816Z,1492161286.816 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:14:46.816Z,1492161286.816 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:14:46.816Z,1492161286.816 [BPC1](ERROR): Communications Fault
2017-04-14T09:14:46.846Z,1492161286.846 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:14:47.376Z,1492161287.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:47.825Z,1492161287.825 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:48.060Z,1492161288.060 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:14:48.060Z,1492161288.060 [BPC1] No Fault, FailCount= 1
2017-04-14T09:14:48.620Z,1492161288.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:49.393Z,1492161289.393 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:50.190Z,1492161290.190 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:50.984Z,1492161290.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:51.388Z,1492161291.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:58.188Z,1492161298.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:58.984Z,1492161298.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:14:59.777Z,1492161299.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:00.572Z,1492161300.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:01.369Z,1492161301.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:01.776Z,1492161301.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:12.193Z,1492161312.194 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:12.988Z,1492161312.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:23.568Z,1492161323.569 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:15:23.569Z,1492161323.569 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:15:23.569Z,1492161323.569 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:15:23.650Z,1492161323.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:15:23.907Z,1492161323.907 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:15:23.908Z,1492161323.908 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:15:24.264Z,1492161324.264 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:15:24.265Z,1492161324.265 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:15:24.265Z,1492161324.265 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:15:26.148Z,1492161326.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:15:26.944Z,1492161326.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:16:10.732Z,1492161370.732 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:16:10.733Z,1492161370.733 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:16:10.733Z,1492161370.733 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:16:10.733Z,1492161370.733 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:16:11.122Z,1492161371.122 [Default:CheckIn:D] Stopped
2017-04-14T09:16:11.122Z,1492161371.122 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:16:11.498Z,1492161371.498 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.096712 min 
2017-04-14T09:16:11.498Z,1492161371.498 [Default:CheckIn:E] Stopped
2017-04-14T09:16:11.498Z,1492161371.498 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:16:11.498Z,1492161371.499 [Default:CheckIn] Stopped
2017-04-14T09:16:11.499Z,1492161371.499 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:16:11.499Z,1492161371.499 [Default:CheckIn](INFO): Running loop #50
2017-04-14T09:16:11.503Z,1492161371.503 [Default:CheckIn] Running Loop=50
2017-04-14T09:16:11.503Z,1492161371.503 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:16:11.503Z,1492161371.503 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:16:15.477Z,1492161375.477 [NAL9602](INFO): Powering up
2017-04-14T09:16:23.672Z,1492161383.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:16:24.476Z,1492161384.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:16:26.405Z,1492161386.405 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:16:36.040Z,1492161396.040 [PNI_TCM](ERROR): CRC does not match. Expected:0x4385 got:0x30359
2017-04-14T09:16:42.822Z,1492161402.822 [NAL9602](INFO): SBD MO Status=0, MOMSN=2143, MT Status=0, MTMSN=0
2017-04-14T09:16:42.822Z,1492161402.822 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:16:49.312Z,1492161409.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:16:50.108Z,1492161410.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:16:52.800Z,1492161412.800 [NAL9602](INFO): GPS fix at 20170414T091724: (36.802354, -121.787104)
2017-04-14T09:16:52.875Z,1492161412.875 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:16:52.887Z,1492161412.887 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:16:59.618Z,1492161419.618 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0204.lzma
2017-04-14T09:17:00.162Z,1492161420.162 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0204.lzma.bak
2017-04-14T09:17:00.162Z,1492161420.162 [DataOverHttps](INFO): SBD MOMSN=4885610
2017-04-14T09:17:04.061Z,1492161424.061 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:17:04.856Z,1492161424.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:17:04.877Z,1492161424.876 [NAL9602](INFO): Powering down
2017-04-14T09:17:10.508Z,1492161430.508 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0205.lzma
2017-04-14T09:17:11.258Z,1492161431.258 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0205.lzma.bak
2017-04-14T09:17:11.258Z,1492161431.258 [DataOverHttps](INFO): SBD MOMSN=4885613
2017-04-14T09:17:11.734Z,1492161431.734 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:17:11.734Z,1492161431.734 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:17:11.734Z,1492161431.734 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:17:20.617Z,1492161440.617 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:17:20.617Z,1492161440.617 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:17:20.617Z,1492161440.617 [BPC1](ERROR): Communications Fault
2017-04-14T09:17:20.695Z,1492161440.695 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:17:21.858Z,1492161441.858 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:17:21.858Z,1492161441.858 [BPC1] No Fault, FailCount= 1
2017-04-14T09:17:47.556Z,1492161467.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:17:47.960Z,1492161467.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:17:48.238Z,1492161468.238 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T09:17:48.238Z,1492161468.238 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:17:48.238Z,1492161468.238 [BPC1](ERROR): Data Fault
2017-04-14T09:17:48.339Z,1492161468.339 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:17:49.479Z,1492161469.479 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:17:49.479Z,1492161469.479 [BPC1] No Fault, FailCount= 1
2017-04-14T09:18:01.560Z,1492161481.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:18:01.964Z,1492161481.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:18:13.944Z,1492161493.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:18:14.740Z,1492161494.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:18:24.562Z,1492161504.562 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:18:24.563Z,1492161504.563 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:18:24.563Z,1492161504.563 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:18:24.630Z,1492161504.630 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:18:24.943Z,1492161504.943 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:18:24.947Z,1492161504.947 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:18:25.321Z,1492161505.321 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:18:25.321Z,1492161505.321 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:18:25.322Z,1492161505.322 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:18:27.868Z,1492161507.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:18:28.664Z,1492161508.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:11.388Z,1492161551.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:12.185Z,1492161552.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:37.108Z,1492161577.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:37.904Z,1492161577.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:51.048Z,1492161591.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:19:51.844Z,1492161591.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:20:30.281Z,1492161630.281 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T09:20:30.281Z,1492161630.281 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:20:30.281Z,1492161630.281 [BPC1](ERROR): Data Fault
2017-04-14T09:20:30.444Z,1492161630.444 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:20:31.554Z,1492161631.554 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:20:31.554Z,1492161631.554 [BPC1] No Fault, FailCount= 1
2017-04-14T09:20:49.264Z,1492161649.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:20:49.668Z,1492161649.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:21:15.636Z,1492161675.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:21:16.432Z,1492161676.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:21:25.499Z,1492161685.499 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:21:25.499Z,1492161685.499 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:21:25.499Z,1492161685.499 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:21:25.521Z,1492161685.521 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:21:25.904Z,1492161685.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:21:25.904Z,1492161685.904 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:21:26.367Z,1492161686.367 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:21:26.373Z,1492161686.372 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:21:26.373Z,1492161686.373 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:22:12.283Z,1492161732.283 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:22:12.283Z,1492161732.283 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:22:12.283Z,1492161732.283 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:22:12.283Z,1492161732.283 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:22:12.765Z,1492161732.765 [Default:CheckIn:D] Stopped
2017-04-14T09:22:12.765Z,1492161732.765 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:22:13.084Z,1492161733.084 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 356.124089 min 
2017-04-14T09:22:13.084Z,1492161733.085 [Default:CheckIn:E] Stopped
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn] Stopped
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn](INFO): Running loop #51
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn] Running Loop=51
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:22:13.085Z,1492161733.085 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:22:17.082Z,1492161737.082 [NAL9602](INFO): Powering up
2017-04-14T09:22:28.126Z,1492161748.126 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:22:32.252Z,1492161752.252 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:22:38.740Z,1492161758.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:22:39.536Z,1492161759.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:22:52.098Z,1492161772.098 [NAL9602](INFO): SBD MO Status=0, MOMSN=2144, MT Status=0, MTMSN=0
2017-04-14T09:22:52.098Z,1492161772.098 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:23:23.062Z,1492161803.062 [NAL9602](INFO): GPS fix at 20170414T092355: (36.802193, -121.787261)
2017-04-14T09:23:23.152Z,1492161803.152 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:23:23.152Z,1492161803.152 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:23:30.844Z,1492161810.844 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0208.lzma
2017-04-14T09:23:31.594Z,1492161811.594 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0208.lzma.bak
2017-04-14T09:23:31.594Z,1492161811.594 [DataOverHttps](INFO): SBD MOMSN=4885617
2017-04-14T09:23:36.039Z,1492161816.039 [NAL9602](INFO): Powering down
2017-04-14T09:23:36.948Z,1492161816.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:23:37.744Z,1492161817.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:23:42.395Z,1492161822.395 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0209.lzma
2017-04-14T09:23:43.162Z,1492161823.162 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0209.lzma.bak
2017-04-14T09:23:43.162Z,1492161823.162 [DataOverHttps](INFO): SBD MOMSN=4885620
2017-04-14T09:23:43.661Z,1492161823.661 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:23:43.661Z,1492161823.661 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:23:43.661Z,1492161823.661 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:24:02.592Z,1492161842.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:24:03.388Z,1492161843.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:24:17.340Z,1492161857.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:24:18.136Z,1492161858.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:24:26.690Z,1492161866.690 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:24:26.690Z,1492161866.690 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:24:26.690Z,1492161866.690 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:24:26.703Z,1492161866.703 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:24:27.045Z,1492161867.045 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:24:27.045Z,1492161867.045 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:24:27.045Z,1492161867.045 [BPC1](ERROR): Communications Fault
2017-04-14T09:24:27.107Z,1492161867.107 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:24:27.107Z,1492161867.107 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:24:27.108Z,1492161867.108 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:24:27.481Z,1492161867.481 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:24:27.481Z,1492161867.481 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:24:27.481Z,1492161867.481 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:24:28.316Z,1492161868.316 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:24:28.316Z,1492161868.316 [BPC1] No Fault, FailCount= 1
2017-04-14T09:25:27.220Z,1492161927.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:25:28.016Z,1492161928.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:25:41.188Z,1492161941.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:25:41.984Z,1492161941.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:24.744Z,1492161984.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:25.156Z,1492161985.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:38.768Z,1492161998.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:39.564Z,1492161999.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:51.104Z,1492162011.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:26:51.900Z,1492162011.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:27:05.084Z,1492162025.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:27:05.880Z,1492162025.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:27:06.361Z,1492162026.361 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:27:06.361Z,1492162026.361 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:27:06.361Z,1492162026.361 [BPC1](ERROR): Communications Fault
2017-04-14T09:27:06.442Z,1492162026.442 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:27:07.627Z,1492162027.627 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:27:07.627Z,1492162027.627 [BPC1] No Fault, FailCount= 1
2017-04-14T09:27:27.594Z,1492162047.593 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:27:27.594Z,1492162047.594 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:27:27.594Z,1492162047.594 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:27:27.629Z,1492162047.629 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:27:28.030Z,1492162048.030 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:27:28.030Z,1492162048.030 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:27:28.428Z,1492162048.428 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:27:28.429Z,1492162048.429 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:27:28.429Z,1492162048.429 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:28:02.584Z,1492162082.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:03.380Z,1492162083.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:14.984Z,1492162094.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:15.780Z,1492162095.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:16.572Z,1492162096.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:17.368Z,1492162097.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:18.164Z,1492162098.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:18.570Z,1492162098.570 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:19.364Z,1492162099.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:20.160Z,1492162100.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:20.564Z,1492162100.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:21.364Z,1492162101.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:22.160Z,1492162102.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:22.564Z,1492162102.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:23.360Z,1492162103.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:24.156Z,1492162104.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:24.560Z,1492162104.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:25.356Z,1492162105.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:26.044Z,1492162106.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:26.840Z,1492162106.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:27.636Z,1492162107.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:28.208Z,1492162108.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:29.004Z,1492162109.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:29.800Z,1492162109.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:30.548Z,1492162110.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:31.344Z,1492162111.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:32.143Z,1492162112.143 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:32.584Z,1492162112.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:33.380Z,1492162113.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:34.156Z,1492162114.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:34.952Z,1492162114.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:35.748Z,1492162115.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:36.152Z,1492162116.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:36.948Z,1492162116.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:37.752Z,1492162117.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:38.156Z,1492162118.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:38.968Z,1492162118.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:39.764Z,1492162119.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:40.168Z,1492162120.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:40.964Z,1492162120.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:41.760Z,1492162121.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:42.164Z,1492162122.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:42.960Z,1492162122.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:43.756Z,1492162123.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:44.154Z,1492162124.154 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:28:44.154Z,1492162124.154 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:28:44.154Z,1492162124.154 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:28:44.154Z,1492162124.154 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:28:44.508Z,1492162124.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:44.536Z,1492162124.536 [Default:CheckIn:D] Stopped
2017-04-14T09:28:44.536Z,1492162124.536 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:28:44.991Z,1492162124.991 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 362.653613 min 
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn:E] Stopped
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn] Stopped
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn](INFO): Running loop #52
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn] Running Loop=52
2017-04-14T09:28:44.992Z,1492162124.992 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:28:44.993Z,1492162124.993 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:28:45.305Z,1492162125.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:46.100Z,1492162126.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:46.504Z,1492162126.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:47.300Z,1492162127.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:48.044Z,1492162128.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:48.840Z,1492162128.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:49.636Z,1492162129.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:50.048Z,1492162130.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:50.576Z,1492162130.576 [NAL9602](INFO): Powering up
2017-04-14T09:28:50.844Z,1492162130.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:51.648Z,1492162131.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:52.056Z,1492162132.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:52.853Z,1492162132.853 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:53.648Z,1492162133.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:54.052Z,1492162134.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:54.849Z,1492162134.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:55.646Z,1492162135.646 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:56.092Z,1492162136.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:56.888Z,1492162136.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:57.684Z,1492162137.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:58.436Z,1492162138.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:28:59.232Z,1492162139.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:00.028Z,1492162140.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:00.432Z,1492162140.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:01.228Z,1492162141.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:01.769Z,1492162141.769 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:29:01.980Z,1492162141.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:02.776Z,1492162142.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:03.572Z,1492162143.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:03.996Z,1492162143.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:04.792Z,1492162144.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:05.588Z,1492162145.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:05.992Z,1492162145.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:06.788Z,1492162146.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:07.584Z,1492162147.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:07.988Z,1492162147.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:08.787Z,1492162148.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:09.591Z,1492162149.591 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:10.080Z,1492162150.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:10.876Z,1492162150.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:11.672Z,1492162151.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:12.412Z,1492162152.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:13.208Z,1492162153.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:14.004Z,1492162154.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:14.453Z,1492162154.453 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:15.248Z,1492162155.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:15.988Z,1492162155.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:16.562Z,1492162156.562 [NAL9602](INFO): SBD MO Status=0, MOMSN=2145, MT Status=0, MTMSN=0
2017-04-14T09:29:16.562Z,1492162156.562 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:29:16.784Z,1492162156.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:17.580Z,1492162157.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:17.984Z,1492162157.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:18.780Z,1492162158.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:19.576Z,1492162159.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:20.021Z,1492162160.021 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:20.816Z,1492162160.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:21.612Z,1492162161.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:22.040Z,1492162162.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:22.836Z,1492162162.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:23.632Z,1492162163.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:24.048Z,1492162164.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:24.844Z,1492162164.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:25.640Z,1492162165.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:26.392Z,1492162166.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:27.188Z,1492162167.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:27.984Z,1492162167.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:28.392Z,1492162168.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:29.188Z,1492162169.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:29.984Z,1492162169.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:30.432Z,1492162170.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:31.228Z,1492162171.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:31.964Z,1492162171.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:32.761Z,1492162172.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:33.556Z,1492162173.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:34.005Z,1492162174.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:34.800Z,1492162174.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:35.596Z,1492162175.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:36.016Z,1492162176.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:36.813Z,1492162176.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:37.608Z,1492162177.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:38.028Z,1492162178.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:38.827Z,1492162178.827 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:39.624Z,1492162179.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:40.392Z,1492162180.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:41.188Z,1492162181.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:41.984Z,1492162181.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:42.389Z,1492162182.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:43.184Z,1492162183.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:43.968Z,1492162183.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:44.764Z,1492162184.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:45.560Z,1492162185.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:45.969Z,1492162185.969 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:46.764Z,1492162186.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:47.560Z,1492162187.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:47.964Z,1492162187.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:48.760Z,1492162188.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:49.556Z,1492162189.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:49.569Z,1492162189.569 [NAL9602](INFO): GPS fix at 20170414T093022: (36.802347, -121.787097)
2017-04-14T09:29:49.675Z,1492162189.675 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:29:49.675Z,1492162189.675 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:29:49.960Z,1492162189.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:50.756Z,1492162190.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:51.554Z,1492162191.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:52.028Z,1492162192.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:52.824Z,1492162192.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:53.620Z,1492162193.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:54.372Z,1492162194.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:54.500Z,1492162194.500 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0212.lzma
2017-04-14T09:29:55.169Z,1492162195.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:55.275Z,1492162195.275 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0212.lzma.bak
2017-04-14T09:29:55.275Z,1492162195.275 [DataOverHttps](INFO): SBD MOMSN=4885624
2017-04-14T09:29:55.964Z,1492162195.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:56.368Z,1492162196.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:57.164Z,1492162197.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:57.912Z,1492162197.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:58.708Z,1492162198.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:59.504Z,1492162199.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:29:59.641Z,1492162199.641 [NAL9602](INFO): Powering down
2017-04-14T09:29:59.912Z,1492162199.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:05.096Z,1492162205.096 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0213.lzma
2017-04-14T09:30:07.223Z,1492162207.223 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0213.lzma.bak
2017-04-14T09:30:07.224Z,1492162207.224 [DataOverHttps](INFO): SBD MOMSN=4885627
2017-04-14T09:30:07.527Z,1492162207.527 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:30:07.527Z,1492162207.527 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:30:07.527Z,1492162207.527 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:30:16.004Z,1492162216.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:16.801Z,1492162216.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:17.596Z,1492162217.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:17.000Z,1492162218.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:18.796Z,1492162218.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:19.592Z,1492162219.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:20.020Z,1492162220.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:20.816Z,1492162220.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:21.612Z,1492162221.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:22.316Z,1492162222.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:23.112Z,1492162223.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:23.908Z,1492162223.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:24.392Z,1492162224.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:25.188Z,1492162225.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:25.856Z,1492162225.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:26.652Z,1492162226.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:27.448Z,1492162227.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:27.864Z,1492162227.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:28.660Z,1492162228.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:28.741Z,1492162228.741 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:30:28.741Z,1492162228.741 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:30:28.742Z,1492162228.741 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:30:28.784Z,1492162228.783 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:30:29.199Z,1492162229.199 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:30:29.199Z,1492162229.199 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:30:29.456Z,1492162229.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:29.585Z,1492162229.585 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:30:29.586Z,1492162229.586 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:30:29.586Z,1492162229.586 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:30:29.860Z,1492162229.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:30.656Z,1492162230.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:31.452Z,1492162231.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:31.856Z,1492162231.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:32.652Z,1492162232.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:33.448Z,1492162233.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:34.041Z,1492162234.041 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:34.726Z,1492162234.726 [PNI_TCM](ERROR): CRC does not match. Expected:0x11392 got:0x7361
2017-04-14T09:30:34.844Z,1492162234.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:35.640Z,1492162235.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:36.340Z,1492162236.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:37.144Z,1492162237.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:37.932Z,1492162237.932 [PNI_TCM](ERROR): CRC does not match. Expected:0x42426 got:0x6336
2017-04-14T09:30:37.940Z,1492162237.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:38.368Z,1492162238.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:39.164Z,1492162239.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:30:39.518Z,1492162239.518 [PNI_TCM](ERROR): CRC does not match. Expected:0x29251 got:0x100
2017-04-14T09:30:39.828Z,1492162239.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:16.696Z,1492162276.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:17.494Z,1492162277.494 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:30.672Z,1492162290.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:31.468Z,1492162291.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:32.208Z,1492162292.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:33.006Z,1492162293.006 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:33.800Z,1492162293.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:34.204Z,1492162294.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:34.000Z,1492162295.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:35.772Z,1492162295.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:42.568Z,1492162302.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:43.366Z,1492162303.366 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:43.836Z,1492162303.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:44.632Z,1492162304.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:45.428Z,1492162305.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:46.224Z,1492162306.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:46.628Z,1492162306.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:47.424Z,1492162307.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:48.208Z,1492162308.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:49.004Z,1492162309.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:49.752Z,1492162309.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:50.548Z,1492162310.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:51.344Z,1492162311.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:51.764Z,1492162311.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:52.560Z,1492162312.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:53.356Z,1492162313.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:53.760Z,1492162313.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:54.556Z,1492162314.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:55.352Z,1492162315.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:55.764Z,1492162315.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:56.560Z,1492162316.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:57.358Z,1492162317.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:57.824Z,1492162317.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:58.620Z,1492162318.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:31:59.416Z,1492162319.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:00.212Z,1492162320.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:00.616Z,1492162320.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:01.412Z,1492162321.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:02.208Z,1492162322.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:02.612Z,1492162322.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:03.408Z,1492162323.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:03.812Z,1492162323.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:04.608Z,1492162324.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:05.404Z,1492162325.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:05.808Z,1492162325.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:06.604Z,1492162326.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:07.401Z,1492162327.401 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:07.808Z,1492162327.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:08.604Z,1492162328.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:09.400Z,1492162329.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:09.804Z,1492162329.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:10.600Z,1492162330.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:11.396Z,1492162331.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:11.820Z,1492162331.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:12.616Z,1492162332.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:13.412Z,1492162333.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:14.204Z,1492162334.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:14.000Z,1492162335.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:15.796Z,1492162335.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:16.200Z,1492162336.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:16.996Z,1492162336.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:17.760Z,1492162337.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:28.160Z,1492162348.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:28.956Z,1492162348.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:31.292Z,1492162351.292 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:32:31.292Z,1492162351.292 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:32:31.292Z,1492162351.292 [BPC1](ERROR): Communications Fault
2017-04-14T09:32:31.388Z,1492162351.388 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:32:32.477Z,1492162352.477 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:32:32.477Z,1492162352.477 [BPC1] No Fault, FailCount= 1
2017-04-14T09:32:32.478Z,1492162352.478 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:32:40.592Z,1492162360.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:41.388Z,1492162361.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:54.620Z,1492162374.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:55.416Z,1492162375.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:56.068Z,1492162376.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:32:56.864Z,1492162376.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:33:29.638Z,1492162409.638 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:33:29.638Z,1492162409.638 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:33:29.638Z,1492162409.638 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:33:29.681Z,1492162409.681 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:33:30.153Z,1492162410.153 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:33:30.153Z,1492162410.153 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:33:30.434Z,1492162410.434 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:33:30.435Z,1492162410.434 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:33:30.453Z,1492162410.453 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:33:38.114Z,1492162418.114 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:33:38.520Z,1492162418.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:33:52.016Z,1492162432.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:33:52.813Z,1492162432.813 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:34:17.652Z,1492162457.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:34:18.448Z,1492162458.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:35:01.224Z,1492162501.224 [CBIT](IMPORTANT): Beginning ground fault scan
2017-04-14T09:35:07.993Z,1492162507.993 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:35:07.993Z,1492162507.993 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:35:07.993Z,1492162507.993 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:35:07.993Z,1492162507.993 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:35:08.398Z,1492162508.398 [Default:CheckIn:D] Stopped
2017-04-14T09:35:08.398Z,1492162508.398 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:35:08.796Z,1492162508.796 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 369.051335 min 
2017-04-14T09:35:08.796Z,1492162508.796 [Default:CheckIn:E] Stopped
2017-04-14T09:35:08.797Z,1492162508.796 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:35:08.797Z,1492162508.797 [Default:CheckIn] Stopped
2017-04-14T09:35:08.797Z,1492162508.797 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:35:08.797Z,1492162508.797 [Default:CheckIn](INFO): Running loop #53
2017-04-14T09:35:08.797Z,1492162508.797 [Default:CheckIn] Running Loop=53
2017-04-14T09:35:08.797Z,1492162508.797 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:35:08.798Z,1492162508.797 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:35:12.468Z,1492162512.468 [NAL9602](INFO): Powering up
2017-04-14T09:35:14.165Z,1492162514.165 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.005139
CHAN A1 (24V): 0.130621
CHAN A2 (12V): 0.001901
CHAN A3 (5V): 0.000048
CHAN B0 (3.3V): -0.001025
CHAN B1 (3.15aV): -0.001193
CHAN B2 (3.15bV): -0.001581
CHAN B3 (GND): -0.002617
OPEN: 0.003593
Full Scale Calc: 4.765 mA, -1.589 mA
2017-04-14T09:35:23.265Z,1492162523.265 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:35:28.308Z,1492162528.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:35:29.104Z,1492162529.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:35:40.466Z,1492162540.466 [NAL9602](INFO): SBD MO Status=0, MOMSN=2146, MT Status=0, MTMSN=0
2017-04-14T09:35:40.466Z,1492162540.466 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:35:42.300Z,1492162542.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:35:43.096Z,1492162543.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:36:16.740Z,1492162576.740 [NAL9602](INFO): GPS fix at 20170414T093650: (36.802354, -121.787133)
2017-04-14T09:36:16.805Z,1492162576.806 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:36:16.806Z,1492162576.806 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:36:22.635Z,1492162582.635 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0216.lzma
2017-04-14T09:36:23.418Z,1492162583.418 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0216.lzma.bak
2017-04-14T09:36:23.418Z,1492162583.418 [DataOverHttps](INFO): SBD MOMSN=4885631
2017-04-14T09:36:29.135Z,1492162589.135 [NAL9602](INFO): Powering down
2017-04-14T09:36:30.534Z,1492162590.534 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:36:30.534Z,1492162590.534 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:36:30.534Z,1492162590.534 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:36:30.549Z,1492162590.549 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:36:30.994Z,1492162590.994 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:36:30.995Z,1492162590.995 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:36:35.302Z,1492162595.302 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:36:35.303Z,1492162595.303 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:36:35.315Z,1492162595.315 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:36:35.400Z,1492162595.400 [DataOverHttps](INFO): Sending 322 bytes from file Logs/20170414T032153/Express0217.lzma
2017-04-14T09:36:37.528Z,1492162597.528 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0217.lzma.bak
2017-04-14T09:36:37.528Z,1492162597.528 [DataOverHttps](INFO): SBD MOMSN=4885634
2017-04-14T09:36:37.948Z,1492162597.948 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:36:37.948Z,1492162597.948 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:36:37.948Z,1492162597.948 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:37:02.160Z,1492162622.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:02.956Z,1492162622.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:03.360Z,1492162623.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:04.164Z,1492162624.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:04.960Z,1492162624.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:05.424Z,1492162625.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:06.220Z,1492162626.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:07.016Z,1492162627.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:07.760Z,1492162627.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:08.556Z,1492162628.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:09.352Z,1492162629.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:09.760Z,1492162629.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:30.096Z,1492162650.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:30.892Z,1492162650.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:31.296Z,1492162651.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:34.116Z,1492162654.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:34.912Z,1492162654.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:35.692Z,1492162655.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:36.488Z,1492162656.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:37.284Z,1492162657.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:37.688Z,1492162657.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:38.484Z,1492162658.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:39.220Z,1492162659.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:40.016Z,1492162660.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:40.812Z,1492162660.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:41.216Z,1492162661.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:42.012Z,1492162662.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:42.808Z,1492162662.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:43.212Z,1492162663.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:44.033Z,1492162664.033 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:44.838Z,1492162664.838 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:45.248Z,1492162665.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:46.045Z,1492162666.045 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:46.842Z,1492162666.842 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:47.296Z,1492162667.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:48.092Z,1492162668.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:37:48.888Z,1492162668.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:38:30.008Z,1492162710.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:38:30.804Z,1492162710.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:39:27.500Z,1492162767.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:39:28.296Z,1492162768.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:39:35.449Z,1492162775.449 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:39:35.449Z,1492162775.449 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:39:35.449Z,1492162775.449 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:39:35.502Z,1492162775.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:39:35.871Z,1492162775.871 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:39:35.871Z,1492162775.871 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:39:36.266Z,1492162776.266 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:39:36.266Z,1492162776.266 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:39:36.267Z,1492162776.267 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:39:41.436Z,1492162781.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:39:42.232Z,1492162782.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:40:07.848Z,1492162807.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:40:08.644Z,1492162808.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:40:48.168Z,1492162848.168 [PNI_TCM](ERROR): CRC does not match. Expected:0x4134 got:0x28696
2017-04-14T09:40:48.619Z,1492162848.619 [PNI_TCM](ERROR): CRC does not match. Expected:0x7570 got:0x112
2017-04-14T09:40:51.365Z,1492162851.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T09:40:54.566Z,1492162854.566 [PNI_TCM](ERROR): CRC does not match. Expected:0x56213 got:0x1857
2017-04-14T09:41:17.020Z,1492162877.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:41:17.816Z,1492162877.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:41:30.942Z,1492162890.943 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:41:31.736Z,1492162891.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:41:38.593Z,1492162898.593 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:41:38.593Z,1492162898.593 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:41:38.594Z,1492162898.593 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:41:38.594Z,1492162898.594 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:41:38.993Z,1492162898.993 [Default:CheckIn:D] Stopped
2017-04-14T09:41:38.993Z,1492162898.993 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:41:42.542Z,1492162902.542 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 375.561230 min 
2017-04-14T09:41:42.542Z,1492162902.542 [Default:CheckIn:E] Stopped
2017-04-14T09:41:42.542Z,1492162902.542 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:41:42.542Z,1492162902.542 [Default:CheckIn] Stopped
2017-04-14T09:41:42.543Z,1492162902.543 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:41:42.543Z,1492162902.543 [Default:CheckIn](INFO): Running loop #54
2017-04-14T09:41:42.543Z,1492162902.543 [Default:CheckIn] Running Loop=54
2017-04-14T09:41:42.547Z,1492162902.547 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:41:42.547Z,1492162902.547 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:41:42.988Z,1492162902.988 [NAL9602](INFO): Powering up
2017-04-14T09:41:54.197Z,1492162914.197 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:41:55.428Z,1492162915.428 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T09:41:55.428Z,1492162915.428 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:41:55.428Z,1492162915.428 [BPC1](ERROR): Data Fault
2017-04-14T09:41:55.496Z,1492162915.496 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:41:56.677Z,1492162916.677 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:41:56.677Z,1492162916.677 [BPC1] No Fault, FailCount= 1
2017-04-14T09:42:12.621Z,1492162932.621 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:42:12.621Z,1492162932.621 [BPC1] Communications Fault, FailCount= 2
2017-04-14T09:42:12.621Z,1492162932.621 [BPC1](ERROR): Communications Fault
2017-04-14T09:42:12.679Z,1492162932.680 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:42:13.850Z,1492162933.850 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:42:13.850Z,1492162933.851 [BPC1] No Fault, FailCount= 2
2017-04-14T09:42:15.240Z,1492162935.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:16.036Z,1492162936.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:23.390Z,1492162943.390 [NAL9602](INFO): SBD MO Status=2, MOMSN=2147, MT Status=2, MTMSN=0
2017-04-14T09:42:23.390Z,1492162943.390 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T09:42:32.712Z,1492162952.712 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:42:33.394Z,1492162953.394 [NAL9602](INFO): SBD MO Status=0, MOMSN=2147, MT Status=0, MTMSN=0
2017-04-14T09:42:33.394Z,1492162953.394 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:42:34.605Z,1492162954.605 [NAL9602](INFO): GPS fix at 20170414T094308: (36.802362, -121.787155)
2017-04-14T09:42:34.691Z,1492162954.691 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:42:34.691Z,1492162954.691 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:42:39.472Z,1492162959.472 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:42:39.472Z,1492162959.472 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:42:39.472Z,1492162959.472 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:42:39.502Z,1492162959.503 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:42:39.596Z,1492162959.596 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0220.lzma
2017-04-14T09:42:39.699Z,1492162959.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:42:39.699Z,1492162959.699 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:42:40.037Z,1492162960.037 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:42:40.038Z,1492162960.037 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:42:40.038Z,1492162960.038 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:42:40.372Z,1492162960.372 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0220.lzma.bak
2017-04-14T09:42:40.372Z,1492162960.372 [DataOverHttps](INFO): SBD MOMSN=4885654
2017-04-14T09:42:40.928Z,1492162960.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:41.724Z,1492162961.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:44.571Z,1492162964.571 [NAL9602](INFO): Powering down
2017-04-14T09:42:49.896Z,1492162969.896 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0221.lzma
2017-04-14T09:42:51.278Z,1492162971.278 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0221.lzma.bak
2017-04-14T09:42:51.278Z,1492162971.278 [DataOverHttps](INFO): SBD MOMSN=4885657
2017-04-14T09:42:51.570Z,1492162971.570 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:42:51.570Z,1492162971.570 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:42:51.570Z,1492162971.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:42:54.828Z,1492162974.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:55.624Z,1492162975.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:56.420Z,1492162976.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:57.140Z,1492162977.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:57.936Z,1492162977.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:58.732Z,1492162978.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:42:59.136Z,1492162979.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:08.931Z,1492162988.931 [BPC1](ERROR): Failed to parse message.
2017-04-14T09:43:08.931Z,1492162988.931 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T09:43:08.931Z,1492162988.931 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:43:08.931Z,1492162988.931 [BPC1](ERROR): Data Fault
2017-04-14T09:43:09.014Z,1492162989.014 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:43:09.596Z,1492162989.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:10.199Z,1492162990.200 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:43:10.200Z,1492162990.200 [BPC1] No Fault, FailCount= 1
2017-04-14T09:43:10.392Z,1492162990.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:11.136Z,1492162991.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:11.932Z,1492162991.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:12.728Z,1492162992.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:43:13.132Z,1492162993.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:44:21.000Z,1492163061.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:44:21.796Z,1492163061.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:16.980Z,1492163116.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:17.776Z,1492163117.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:28.684Z,1492163128.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:29.480Z,1492163129.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:40.177Z,1492163140.177 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:45:40.177Z,1492163140.177 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:45:40.177Z,1492163140.177 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:45:40.236Z,1492163140.236 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:45:40.558Z,1492163140.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:45:40.558Z,1492163140.558 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:45:40.000Z,1492163141.000 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:45:41.000Z,1492163141.000 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:45:41.001Z,1492163141.001 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:45:43.396Z,1492163143.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:45:44.192Z,1492163144.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:46:11.663Z,1492163171.663 [PNI_TCM](ERROR): CRC does not match. Expected:0x5965 got:0x178
2017-04-14T09:47:07.200Z,1492163227.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:47:07.998Z,1492163227.998 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:47:21.176Z,1492163241.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:47:21.972Z,1492163241.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:47:52.190Z,1492163272.190 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:47:52.190Z,1492163272.190 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:47:52.190Z,1492163272.190 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:47:52.190Z,1492163272.190 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:47:52.601Z,1492163272.601 [Default:CheckIn:D] Stopped
2017-04-14T09:47:52.601Z,1492163272.601 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.788021 min 
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn:E] Stopped
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn] Stopped
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn](INFO): Running loop #55
2017-04-14T09:47:53.024Z,1492163273.024 [Default:CheckIn] Running Loop=55
2017-04-14T09:47:53.025Z,1492163273.025 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:47:53.025Z,1492163273.025 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:47:56.729Z,1492163276.729 [NAL9602](INFO): Powering up
2017-04-14T09:48:07.913Z,1492163287.913 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:48:31.068Z,1492163311.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:48:31.864Z,1492163311.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:48:34.722Z,1492163314.722 [NAL9602](INFO): SBD MO Status=0, MOMSN=2148, MT Status=0, MTMSN=0
2017-04-14T09:48:34.722Z,1492163314.722 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:48:35.928Z,1492163315.928 [NAL9602](INFO): GPS fix at 20170414T094910: (36.802315, -121.787151)
2017-04-14T09:48:36.019Z,1492163316.019 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:48:36.019Z,1492163316.019 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:48:40.883Z,1492163320.883 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20170414T032153/Courier0224.lzma
2017-04-14T09:48:41.367Z,1492163321.367 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:48:41.368Z,1492163321.368 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:48:41.368Z,1492163321.368 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:48:41.405Z,1492163321.405 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:48:42.606Z,1492163322.606 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0224.lzma.bak
2017-04-14T09:48:42.606Z,1492163322.606 [DataOverHttps](INFO): SBD MOMSN=4885663
2017-04-14T09:48:42.730Z,1492163322.730 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:48:42.730Z,1492163322.730 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:48:42.882Z,1492163322.882 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:48:42.883Z,1492163322.883 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:48:42.883Z,1492163322.883 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:48:46.655Z,1492163326.655 [NAL9602](INFO): Powering down
2017-04-14T09:48:52.400Z,1492163332.400 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0225.lzma
2017-04-14T09:48:53.150Z,1492163333.150 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0225.lzma.bak
2017-04-14T09:48:53.150Z,1492163333.150 [DataOverHttps](INFO): SBD MOMSN=4885666
2017-04-14T09:48:53.672Z,1492163333.672 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:48:53.672Z,1492163333.672 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:48:53.672Z,1492163333.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:49:26.575Z,1492163366.575 [PNI_TCM](ERROR): CRC does not match. Expected:0x38336 got:0x49280
2017-04-14T09:49:35.764Z,1492163375.764 [PNI_TCM](ERROR): CRC does not match. Expected:0x58245 got:0x48665
2017-04-14T09:49:38.554Z,1492163378.554 [PNI_TCM](ERROR): CRC does not match. Expected:0x63644 got:0x16852
2017-04-14T09:49:54.192Z,1492163394.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:49:54.988Z,1492163394.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:50:08.984Z,1492163408.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:50:09.780Z,1492163409.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:06.464Z,1492163466.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:07.260Z,1492163467.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:07.664Z,1492163467.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:13.916Z,1492163473.916 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T09:51:13.916Z,1492163473.916 [BPC1] Data Fault, FailCount= 1
2017-04-14T09:51:13.916Z,1492163473.916 [BPC1](ERROR): Data Fault
2017-04-14T09:51:13.998Z,1492163473.998 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T09:51:15.219Z,1492163475.219 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:51:15.227Z,1492163475.227 [BPC1] No Fault, FailCount= 1
2017-04-14T09:51:18.848Z,1492163478.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:19.644Z,1492163479.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:32.860Z,1492163492.861 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:33.656Z,1492163493.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:51:43.126Z,1492163503.126 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:51:43.126Z,1492163503.126 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:51:43.126Z,1492163503.126 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:51:43.153Z,1492163503.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:51:43.580Z,1492163503.580 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:51:43.581Z,1492163503.580 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:51:43.941Z,1492163503.941 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:51:43.941Z,1492163503.941 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:51:43.941Z,1492163503.941 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:52:00.096Z,1492163520.096 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:52:00.096Z,1492163520.096 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:52:00.096Z,1492163520.096 [BPC1](ERROR): Communications Fault
2017-04-14T09:52:00.161Z,1492163520.161 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:52:01.105Z,1492163521.105 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:52:01.105Z,1492163521.105 [BPC1] No Fault, FailCount= 1
2017-04-14T09:52:16.324Z,1492163536.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:17.120Z,1492163537.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:30.292Z,1492163550.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:31.088Z,1492163551.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:33.064Z,1492163553.064 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T09:52:42.708Z,1492163562.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:43.504Z,1492163563.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:56.708Z,1492163576.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:52:57.504Z,1492163577.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:53:54.166Z,1492163634.166 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:53:54.166Z,1492163634.166 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:53:54.166Z,1492163634.166 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:53:54.166Z,1492163634.166 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:53:54.578Z,1492163634.578 [Default:CheckIn:D] Stopped
2017-04-14T09:53:54.578Z,1492163634.578 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:53:54.970Z,1492163634.970 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 387.820996 min 
2017-04-14T09:53:54.971Z,1492163634.971 [Default:CheckIn:E] Stopped
2017-04-14T09:53:54.971Z,1492163634.971 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:53:54.971Z,1492163634.971 [Default:CheckIn] Stopped
2017-04-14T09:53:54.971Z,1492163634.971 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:53:54.971Z,1492163634.971 [Default:CheckIn](INFO): Running loop #56
2017-04-14T09:53:54.972Z,1492163634.972 [Default:CheckIn] Running Loop=56
2017-04-14T09:53:54.972Z,1492163634.972 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:53:54.972Z,1492163634.972 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:53:58.877Z,1492163638.877 [NAL9602](INFO): Powering up
2017-04-14T09:54:06.548Z,1492163646.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:54:07.344Z,1492163647.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:54:09.841Z,1492163649.841 [NAL9602](INFO): NAL9602 initialized
2017-04-14T09:54:20.532Z,1492163660.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:54:21.328Z,1492163661.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:54:25.042Z,1492163665.042 [NAL9602](INFO): SBD MO Status=0, MOMSN=2149, MT Status=0, MTMSN=0
2017-04-14T09:54:25.042Z,1492163665.042 [NAL9602](INFO): No messages in MT queue
2017-04-14T09:54:26.244Z,1492163666.244 [NAL9602](INFO): GPS fix at 20170414T095501: (36.802319, -121.787143)
2017-04-14T09:54:26.322Z,1492163666.322 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T09:54:26.322Z,1492163666.322 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T09:54:31.055Z,1492163671.055 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0228.lzma
2017-04-14T09:54:31.842Z,1492163671.842 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0228.lzma.bak
2017-04-14T09:54:31.842Z,1492163671.842 [DataOverHttps](INFO): SBD MOMSN=4885670
2017-04-14T09:54:36.319Z,1492163676.319 [NAL9602](INFO): Powering down
2017-04-14T09:54:42.177Z,1492163682.177 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0229.lzma
2017-04-14T09:54:43.007Z,1492163683.007 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0229.lzma.bak
2017-04-14T09:54:43.007Z,1492163683.007 [DataOverHttps](INFO): SBD MOMSN=4885673
2017-04-14T09:54:43.370Z,1492163683.370 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T09:54:43.370Z,1492163683.370 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T09:54:43.370Z,1492163683.370 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T09:54:47.378Z,1492163687.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x21623 got:0x16756
2017-04-14T09:54:47.378Z,1492163687.378 [PNI_TCM](ERROR): CRC does not match. Expected:0x39198 got:0x16754
2017-04-14T09:54:47.379Z,1492163687.379 [PNI_TCM](ERROR): CRC does not match. Expected:0x56964 got:0x16755
2017-04-14T09:54:47.383Z,1492163687.383 [PNI_TCM](ERROR): CRC does not match. Expected:0x12320 got:0x16755
2017-04-14T09:54:47.384Z,1492163687.384 [PNI_TCM](ERROR): CRC does not match. Expected:0x12320 got:0x16755
2017-04-14T09:54:47.384Z,1492163687.384 [PNI_TCM](ERROR): CRC does not match. Expected:0x12320 got:0x16755
2017-04-14T09:54:47.384Z,1492163687.384 [PNI_TCM](ERROR): CRC does not match. Expected:0x12320 got:0x16754
2017-04-14T09:54:47.385Z,1492163687.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x56964 got:0x16754
2017-04-14T09:54:47.385Z,1492163687.385 [PNI_TCM](ERROR): CRC does not match. Expected:0x56964 got:0x16754
2017-04-14T09:54:47.471Z,1492163687.471 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:54:47.471Z,1492163687.471 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T09:54:47.471Z,1492163687.471 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:54:47.502Z,1492163687.502 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:54:47.645Z,1492163687.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:54:47.646Z,1492163687.645 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T09:54:47.998Z,1492163687.998 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:54:47.999Z,1492163687.999 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:54:47.999Z,1492163687.999 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:55:30.480Z,1492163730.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:55:31.276Z,1492163731.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:55:32.032Z,1492163732.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:55:32.828Z,1492163732.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:55:43.660Z,1492163743.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:55:44.457Z,1492163744.457 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:56:41.868Z,1492163801.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:56:42.666Z,1492163802.666 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:57:08.272Z,1492163828.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:57:09.069Z,1492163829.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:57:49.383Z,1492163869.383 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T09:57:49.383Z,1492163869.383 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T09:57:49.383Z,1492163869.383 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T09:57:49.421Z,1492163869.421 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T09:57:49.546Z,1492163869.546 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T09:57:49.546Z,1492163869.546 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T09:57:49.938Z,1492163869.938 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T09:57:49.938Z,1492163869.938 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T09:57:49.938Z,1492163869.938 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T09:58:32.132Z,1492163912.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:58:32.928Z,1492163912.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:58:54.299Z,1492163934.299 [BPC1](ERROR): Failed to receive battery data
2017-04-14T09:58:54.299Z,1492163934.299 [BPC1] Communications Fault, FailCount= 1
2017-04-14T09:58:54.299Z,1492163934.299 [BPC1](ERROR): Communications Fault
2017-04-14T09:58:54.409Z,1492163934.409 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T09:58:55.492Z,1492163935.492 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T09:58:55.492Z,1492163935.492 [BPC1] No Fault, FailCount= 1
2017-04-14T09:59:05.671Z,1492163945.671 [PNI_TCM](ERROR): CRC does not match. Expected:0x41998 got:0x49448
2017-04-14T09:59:10.467Z,1492163950.467 [PNI_TCM](ERROR): CRC does not match. Expected:0x26433 got:0x16852
2017-04-14T09:59:15.273Z,1492163955.273 [PNI_TCM](ERROR): CRC does not match. Expected:0x29439 got:0x9421
2017-04-14T09:59:44.123Z,1492163984.123 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T09:59:44.123Z,1492163984.123 [Default:CheckIn:C.Wait] Stopped
2017-04-14T09:59:44.123Z,1492163984.123 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T09:59:44.123Z,1492163984.123 [Default:CheckIn:D] Running Loop=1
2017-04-14T09:59:44.495Z,1492163984.494 [Default:CheckIn:D] Stopped
2017-04-14T09:59:44.495Z,1492163984.495 [Default:CheckIn:E] Running Loop=1
2017-04-14T09:59:44.892Z,1492163984.892 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 393.652930 min 
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn:E] Stopped
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn] Stopped
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn](INFO): Running loop #57
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn] Running Loop=57
2017-04-14T09:59:44.893Z,1492163984.893 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T09:59:44.893Z,1492163984.894 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T09:59:48.402Z,1492163988.402 [NAL9602](INFO): Powering up
2017-04-14T09:59:55.256Z,1492163995.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:59:56.052Z,1492163996.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T09:59:56.794Z,1492163996.794 [PNI_TCM](ERROR): CRC does not match. Expected:0x55469 got:0x7361
2017-04-14T09:59:59.561Z,1492163999.561 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:00:11.162Z,1492164011.162 [NAL9602](INFO): SBD MO Status=0, MOMSN=2150, MT Status=0, MTMSN=0
2017-04-14T10:00:11.162Z,1492164011.162 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:00:24.760Z,1492164024.760 [NAL9602](INFO): GPS fix at 20170414T100100: (36.802323, -121.787169)
2017-04-14T10:00:24.842Z,1492164024.842 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:00:24.842Z,1492164024.842 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:00:30.080Z,1492164030.080 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0232.lzma
2017-04-14T10:00:30.874Z,1492164030.874 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0232.lzma.bak
2017-04-14T10:00:30.874Z,1492164030.874 [DataOverHttps](INFO): SBD MOMSN=4885715
2017-04-14T10:00:35.210Z,1492164035.210 [NAL9602](INFO): Powering down
2017-04-14T10:00:40.888Z,1492164040.888 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0233.lzma
2017-04-14T10:00:41.686Z,1492164041.686 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0233.lzma.bak
2017-04-14T10:00:41.686Z,1492164041.686 [DataOverHttps](INFO): SBD MOMSN=4885718
2017-04-14T10:00:42.172Z,1492164042.172 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:00:42.172Z,1492164042.172 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:00:42.173Z,1492164042.173 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:00:50.120Z,1492164050.120 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:00:50.120Z,1492164050.120 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:00:50.120Z,1492164050.120 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:00:50.134Z,1492164050.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:00:50.571Z,1492164050.570 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:00:50.571Z,1492164050.571 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:00:50.919Z,1492164050.919 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:00:50.919Z,1492164050.920 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:00:50.920Z,1492164050.920 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:01:19.920Z,1492164079.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:01:20.716Z,1492164080.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:01:39.706Z,1492164099.706 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:01:39.706Z,1492164099.706 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:01:39.706Z,1492164099.706 [BPC1](ERROR): Communications Fault
2017-04-14T10:01:39.859Z,1492164099.859 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:01:40.992Z,1492164100.992 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:01:40.992Z,1492164100.992 [BPC1] No Fault, FailCount= 1
2017-04-14T10:02:12.983Z,1492164132.983 [PNI_TCM](ERROR): CRC does not match. Expected:0x25427 got:0x49447
2017-04-14T10:02:17.420Z,1492164137.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:02:18.224Z,1492164138.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:02:22.180Z,1492164142.180 [PNI_TCM](ERROR): CRC does not match. Expected:0x4479 got:0x1857
2017-04-14T10:02:28.593Z,1492164148.593 [PNI_TCM](ERROR): CRC does not match. Expected:0x55496 got:0x46641
2017-04-14T10:02:33.432Z,1492164153.432 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:02:43.004Z,1492164163.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:02:43.800Z,1492164163.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:02:57.744Z,1492164177.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:02:58.540Z,1492164178.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:03:03.532Z,1492164183.532 [BPC1](ERROR): Failed to parse message.
2017-04-14T10:03:03.532Z,1492164183.532 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:03:03.532Z,1492164183.532 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:03:03.532Z,1492164183.532 [BPC1](ERROR): Data Fault
2017-04-14T10:03:03.583Z,1492164183.583 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:03:04.806Z,1492164184.806 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:03:04.806Z,1492164184.806 [BPC1] No Fault, FailCount= 1
2017-04-14T10:03:35.525Z,1492164215.525 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:03:35.525Z,1492164215.525 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:03:35.525Z,1492164215.526 [BPC1](ERROR): Communications Fault
2017-04-14T10:03:35.566Z,1492164215.566 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:03:36.791Z,1492164216.791 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:03:36.791Z,1492164216.792 [BPC1] No Fault, FailCount= 1
2017-04-14T10:03:41.224Z,1492164221.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:03:42.020Z,1492164222.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:03:50.914Z,1492164230.914 [BPC1](ERROR): Failed to parse message.
2017-04-14T10:03:50.914Z,1492164230.914 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:03:50.914Z,1492164230.914 [BPC1] Data Fault, FailCount= 2
2017-04-14T10:03:50.914Z,1492164230.914 [BPC1](ERROR): Data Fault
2017-04-14T10:03:51.036Z,1492164231.036 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:03:51.036Z,1492164231.036 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:03:51.036Z,1492164231.036 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:03:51.131Z,1492164231.131 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:03:51.139Z,1492164231.139 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:03:51.415Z,1492164231.415 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:03:51.415Z,1492164231.415 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:03:51.762Z,1492164231.763 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:03:51.767Z,1492164231.767 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:03:51.768Z,1492164231.768 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:03:52.161Z,1492164232.161 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:03:52.161Z,1492164232.161 [BPC1] No Fault, FailCount= 2
2017-04-14T10:04:03.316Z,1492164243.316 [BPC1](ERROR): Failed to parse message.
2017-04-14T10:04:03.316Z,1492164243.316 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:04:03.316Z,1492164243.316 [BPC1] Data Fault, FailCount= 3
2017-04-14T10:04:03.316Z,1492164243.316 [BPC1](ERROR): Data Fault
2017-04-14T10:04:03.347Z,1492164243.347 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:04:04.567Z,1492164244.567 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:04:04.567Z,1492164244.567 [BPC1] No Fault, FailCount= 3
2017-04-14T10:04:07.620Z,1492164247.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:08.416Z,1492164248.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:09.160Z,1492164249.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:09.956Z,1492164249.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:10.752Z,1492164250.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:11.156Z,1492164251.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:11.952Z,1492164251.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:12.704Z,1492164252.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:13.501Z,1492164253.501 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:14.296Z,1492164254.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:14.728Z,1492164254.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:15.524Z,1492164255.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:16.320Z,1492164256.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:16.793Z,1492164256.793 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:17.588Z,1492164257.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:18.385Z,1492164258.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:18.792Z,1492164258.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:19.588Z,1492164259.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:20.386Z,1492164260.386 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:20.808Z,1492164260.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:21.604Z,1492164261.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:22.400Z,1492164262.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:23.136Z,1492164263.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:23.932Z,1492164263.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:24.728Z,1492164264.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:25.136Z,1492164265.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:25.932Z,1492164265.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:26.684Z,1492164266.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:27.480Z,1492164267.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:28.276Z,1492164268.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:28.688Z,1492164268.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:29.309Z,1492164269.309 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:04:29.309Z,1492164269.309 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:04:29.309Z,1492164269.309 [BPC1](ERROR): Data Fault
2017-04-14T10:04:29.363Z,1492164269.363 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:04:29.484Z,1492164269.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:30.280Z,1492164270.280 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:30.639Z,1492164270.639 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:04:30.639Z,1492164270.639 [BPC1] No Fault, FailCount= 1
2017-04-14T10:04:30.684Z,1492164270.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:31.480Z,1492164271.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:32.289Z,1492164272.289 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:32.720Z,1492164272.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:33.516Z,1492164273.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:34.315Z,1492164274.315 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:34.828Z,1492164274.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:35.624Z,1492164275.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:36.420Z,1492164276.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:37.113Z,1492164277.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:37.908Z,1492164277.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:38.704Z,1492164278.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:39.112Z,1492164279.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:39.908Z,1492164279.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:40.713Z,1492164280.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:41.120Z,1492164281.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:41.919Z,1492164281.919 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:42.696Z,1492164282.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:43.492Z,1492164283.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:44.288Z,1492164284.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:44.692Z,1492164284.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:45.496Z,1492164285.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:46.292Z,1492164286.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:46.696Z,1492164286.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:47.493Z,1492164287.493 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:48.290Z,1492164288.290 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:48.776Z,1492164288.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:49.572Z,1492164289.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:50.370Z,1492164290.370 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:51.093Z,1492164291.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:51.888Z,1492164291.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:52.684Z,1492164292.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:53.112Z,1492164293.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:53.909Z,1492164293.909 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:54.644Z,1492164294.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:55.440Z,1492164295.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:56.236Z,1492164296.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:56.640Z,1492164296.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:57.436Z,1492164297.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:58.232Z,1492164298.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:58.636Z,1492164298.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:04:59.432Z,1492164299.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:00.228Z,1492164300.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:00.632Z,1492164300.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:01.429Z,1492164301.429 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:02.224Z,1492164302.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:02.730Z,1492164302.730 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:03.524Z,1492164303.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:04.320Z,1492164304.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:05.072Z,1492164305.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:05.868Z,1492164305.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:06.664Z,1492164306.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:07.068Z,1492164307.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:07.864Z,1492164307.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:08.616Z,1492164308.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:09.412Z,1492164309.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:10.208Z,1492164310.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:10.616Z,1492164310.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:11.412Z,1492164311.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:12.208Z,1492164312.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:12.612Z,1492164312.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:13.409Z,1492164313.409 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:14.204Z,1492164314.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:14.616Z,1492164314.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:15.412Z,1492164315.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:16.208Z,1492164316.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:16.712Z,1492164316.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:17.508Z,1492164317.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:18.304Z,1492164318.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:19.052Z,1492164319.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:19.848Z,1492164319.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:20.644Z,1492164320.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:21.048Z,1492164321.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:05:42.825Z,1492164342.825 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:05:42.825Z,1492164342.825 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:05:42.825Z,1492164342.825 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:05:42.825Z,1492164342.825 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:05:43.269Z,1492164343.269 [Default:CheckIn:D] Stopped
2017-04-14T10:05:43.269Z,1492164343.269 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:05:43.630Z,1492164343.630 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 399.632487 min 
2017-04-14T10:05:43.630Z,1492164343.630 [Default:CheckIn:E] Stopped
2017-04-14T10:05:43.630Z,1492164343.630 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:05:43.630Z,1492164343.630 [Default:CheckIn] Stopped
2017-04-14T10:05:43.630Z,1492164343.630 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:05:43.631Z,1492164343.631 [Default:CheckIn](INFO): Running loop #58
2017-04-14T10:05:43.631Z,1492164343.631 [Default:CheckIn] Running Loop=58
2017-04-14T10:05:43.631Z,1492164343.631 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:05:43.631Z,1492164343.631 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:05:47.656Z,1492164347.656 [NAL9602](INFO): Powering up
2017-04-14T10:05:58.637Z,1492164358.637 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:06:15.434Z,1492164375.434 [NAL9602](INFO): SBD MO Status=0, MOMSN=2151, MT Status=0, MTMSN=0
2017-04-14T10:06:15.434Z,1492164375.434 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:06:25.832Z,1492164385.832 [NAL9602](INFO): GPS fix at 20170414T100702: (36.802343, -121.787148)
2017-04-14T10:06:25.933Z,1492164385.933 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:06:25.933Z,1492164385.933 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:06:30.940Z,1492164390.940 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0236.lzma
2017-04-14T10:06:31.722Z,1492164391.722 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0236.lzma.bak
2017-04-14T10:06:31.722Z,1492164391.722 [DataOverHttps](INFO): SBD MOMSN=4885731
2017-04-14T10:06:36.085Z,1492164396.085 [NAL9602](INFO): Powering down
2017-04-14T10:06:42.120Z,1492164402.120 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0237.lzma
2017-04-14T10:06:42.898Z,1492164402.898 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0237.lzma.bak
2017-04-14T10:06:42.898Z,1492164402.898 [DataOverHttps](INFO): SBD MOMSN=4885734
2017-04-14T10:06:43.385Z,1492164403.385 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:06:43.385Z,1492164403.385 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:06:43.385Z,1492164403.385 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:06:52.112Z,1492164412.112 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:06:52.112Z,1492164412.112 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:06:52.112Z,1492164412.112 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:06:52.146Z,1492164412.146 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:06:52.426Z,1492164412.426 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:06:52.426Z,1492164412.426 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:06:52.805Z,1492164412.805 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:06:52.805Z,1492164412.805 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:06:52.806Z,1492164412.806 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:06:55.416Z,1492164415.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:06:56.212Z,1492164416.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:07:09.348Z,1492164429.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:07:10.144Z,1492164430.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:07:52.840Z,1492164472.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:07:53.636Z,1492164473.636 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:08:18.540Z,1492164498.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:08:19.337Z,1492164499.337 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:09:16.724Z,1492164556.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:09:17.521Z,1492164557.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:09:30.439Z,1492164570.439 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:09:30.440Z,1492164570.440 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:09:30.440Z,1492164570.440 [BPC1](ERROR): Data Fault
2017-04-14T10:09:30.501Z,1492164570.501 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:09:31.652Z,1492164571.652 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:09:31.653Z,1492164571.653 [BPC1] No Fault, FailCount= 1
2017-04-14T10:09:43.096Z,1492164583.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:09:43.892Z,1492164583.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:09:52.972Z,1492164592.972 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:09:52.973Z,1492164592.973 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:09:52.973Z,1492164592.973 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:09:53.036Z,1492164593.036 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:09:53.366Z,1492164593.366 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:09:53.366Z,1492164593.366 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:09:53.799Z,1492164593.799 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:09:53.800Z,1492164593.800 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:09:53.800Z,1492164593.800 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:10:40.590Z,1492164640.590 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:10:41.384Z,1492164641.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:11:22.641Z,1492164682.641 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:11:22.641Z,1492164682.641 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:11:22.641Z,1492164682.641 [BPC1](ERROR): Communications Fault
2017-04-14T10:11:22.790Z,1492164682.790 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:11:23.990Z,1492164683.990 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:11:23.990Z,1492164683.990 [BPC1] No Fault, FailCount= 1
2017-04-14T10:11:43.861Z,1492164703.861 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:11:43.861Z,1492164703.861 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:11:43.861Z,1492164703.861 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:11:43.861Z,1492164703.861 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:11:44.265Z,1492164704.265 [Default:CheckIn:D] Stopped
2017-04-14T10:11:44.266Z,1492164704.266 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:11:44.667Z,1492164704.667 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 405.649121 min 
2017-04-14T10:11:44.667Z,1492164704.667 [Default:CheckIn:E] Stopped
2017-04-14T10:11:44.667Z,1492164704.667 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:11:44.667Z,1492164704.667 [Default:CheckIn] Stopped
2017-04-14T10:11:44.667Z,1492164704.667 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:11:44.668Z,1492164704.668 [Default:CheckIn](INFO): Running loop #59
2017-04-14T10:11:44.668Z,1492164704.668 [Default:CheckIn] Running Loop=59
2017-04-14T10:11:44.668Z,1492164704.668 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:11:44.668Z,1492164704.668 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:11:49.857Z,1492164709.857 [NAL9602](INFO): Powering up
2017-04-14T10:12:01.053Z,1492164721.053 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:12:22.246Z,1492164742.246 [NAL9602](INFO): SBD MO Status=0, MOMSN=2152, MT Status=0, MTMSN=0
2017-04-14T10:12:22.246Z,1492164742.246 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:12:33.562Z,1492164753.562 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:12:53.938Z,1492164773.938 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:12:53.938Z,1492164773.938 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T10:12:53.938Z,1492164773.938 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:12:53.976Z,1492164773.976 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:12:54.424Z,1492164774.424 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:12:54.424Z,1492164774.424 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T10:12:54.755Z,1492164774.755 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:12:54.756Z,1492164774.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:54.776Z,1492164774.776 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:12:54.777Z,1492164774.777 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:12:55.552Z,1492164775.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:55.964Z,1492164775.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:56.761Z,1492164776.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:57.558Z,1492164777.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:58.052Z,1492164778.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:58.848Z,1492164778.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:12:59.644Z,1492164779.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:00.432Z,1492164780.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:01.228Z,1492164781.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:02.024Z,1492164782.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:02.428Z,1492164782.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:03.233Z,1492164783.233 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:04.008Z,1492164784.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:04.804Z,1492164784.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:05.600Z,1492164785.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:06.004Z,1492164786.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:06.804Z,1492164786.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:07.600Z,1492164787.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:08.004Z,1492164788.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:08.800Z,1492164788.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:09.598Z,1492164789.598 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:10.004Z,1492164790.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:10.800Z,1492164790.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:11.596Z,1492164791.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:12.016Z,1492164792.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:12.812Z,1492164792.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:13.480Z,1492164793.480 [NAL9602](INFO): GPS fix at 20170414T101350: (36.802393, -121.787111)
2017-04-14T10:13:13.608Z,1492164793.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:13.629Z,1492164793.629 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:13:13.629Z,1492164793.629 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:13:14.404Z,1492164794.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:14.808Z,1492164794.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:15.605Z,1492164795.605 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:16.332Z,1492164796.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:19.029Z,1492164799.029 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0240.lzma
2017-04-14T10:13:19.822Z,1492164799.822 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0240.lzma.bak
2017-04-14T10:13:19.822Z,1492164799.822 [DataOverHttps](INFO): SBD MOMSN=4885738
2017-04-14T10:13:20.355Z,1492164800.355 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:13:20.355Z,1492164800.355 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:13:20.355Z,1492164800.355 [BPC1](ERROR): Communications Fault
2017-04-14T10:13:20.423Z,1492164800.423 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:13:24.339Z,1492164804.339 [NAL9602](INFO): Powering down
2017-04-14T10:13:24.580Z,1492164804.580 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:13:24.580Z,1492164804.580 [BPC1] No Fault, FailCount= 1
2017-04-14T10:13:29.757Z,1492164809.757 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0241.lzma
2017-04-14T10:13:30.538Z,1492164810.538 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0241.lzma.bak
2017-04-14T10:13:30.538Z,1492164810.538 [DataOverHttps](INFO): SBD MOMSN=4885741
2017-04-14T10:13:31.025Z,1492164811.025 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:13:31.025Z,1492164811.025 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:13:31.025Z,1492164811.026 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:13:40.724Z,1492164820.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:41.520Z,1492164821.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:54.740Z,1492164834.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:13:55.536Z,1492164835.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:14:38.256Z,1492164878.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:14:38.664Z,1492164878.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:15:04.592Z,1492164904.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:15:05.389Z,1492164905.389 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:15:18.568Z,1492164918.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:15:19.364Z,1492164919.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:15:54.978Z,1492164954.978 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:15:54.978Z,1492164954.978 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:15:54.978Z,1492164954.978 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:15:55.008Z,1492164955.008 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:15:55.452Z,1492164955.452 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:15:55.452Z,1492164955.452 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:15:55.783Z,1492164955.783 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:15:55.784Z,1492164955.784 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:15:55.784Z,1492164955.784 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:16:28.472Z,1492164988.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:16:29.268Z,1492164989.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:16:42.480Z,1492165002.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:16:43.276Z,1492165003.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:26.056Z,1492165046.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:26.460Z,1492165046.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:52.365Z,1492165072.365 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:53.160Z,1492165073.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:53.956Z,1492165073.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:54.360Z,1492165074.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:55.156Z,1492165075.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:17:55.940Z,1492165075.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:18:06.344Z,1492165086.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:18:07.140Z,1492165087.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:18:31.873Z,1492165111.873 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:18:31.873Z,1492165111.873 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:18:31.873Z,1492165111.873 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:18:31.873Z,1492165111.873 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:18:32.262Z,1492165112.262 [Default:CheckIn:D] Stopped
2017-04-14T10:18:32.262Z,1492165112.262 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:18:32.670Z,1492165112.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 412.449056 min 
2017-04-14T10:18:32.670Z,1492165112.670 [Default:CheckIn:E] Stopped
2017-04-14T10:18:32.670Z,1492165112.670 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:18:32.670Z,1492165112.670 [Default:CheckIn] Stopped
2017-04-14T10:18:32.670Z,1492165112.670 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:18:32.670Z,1492165112.671 [Default:CheckIn](INFO): Running loop #60
2017-04-14T10:18:32.670Z,1492165112.671 [Default:CheckIn] Running Loop=60
2017-04-14T10:18:32.671Z,1492165112.671 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:18:32.671Z,1492165112.671 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:18:36.325Z,1492165116.325 [NAL9602](INFO): Powering up
2017-04-14T10:18:47.522Z,1492165127.522 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:18:56.014Z,1492165136.014 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:18:56.014Z,1492165136.014 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:18:56.014Z,1492165136.014 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:18:56.065Z,1492165136.065 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:18:56.569Z,1492165136.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:18:56.569Z,1492165136.569 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:18:56.962Z,1492165136.962 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:18:56.962Z,1492165136.963 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:18:56.989Z,1492165136.989 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:19:12.322Z,1492165152.322 [NAL9602](INFO): SBD MO Status=2, MOMSN=2153, MT Status=2, MTMSN=0
2017-04-14T10:19:12.322Z,1492165152.322 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:19:16.272Z,1492165156.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:17.068Z,1492165157.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:17.804Z,1492165157.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:18.600Z,1492165158.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:30.236Z,1492165170.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:31.032Z,1492165171.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:19:50.880Z,1492165190.880 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:19:50.880Z,1492165190.880 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:19:50.880Z,1492165190.880 [BPC1](ERROR): Data Fault
2017-04-14T10:19:50.983Z,1492165190.983 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:19:52.093Z,1492165192.093 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:19:52.093Z,1492165192.093 [BPC1] No Fault, FailCount= 1
2017-04-14T10:20:13.740Z,1492165213.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:20:14.399Z,1492165214.399 [NAL9602](INFO): SBD MO Status=0, MOMSN=2153, MT Status=0, MTMSN=0
2017-04-14T10:20:14.399Z,1492165214.399 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:20:14.536Z,1492165214.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:20:15.601Z,1492165215.601 [NAL9602](INFO): GPS fix at 20170414T102053: (36.802351, -121.787137)
2017-04-14T10:20:15.694Z,1492165215.694 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:20:15.694Z,1492165215.694 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:20:20.589Z,1492165220.589 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0244.lzma
2017-04-14T10:20:21.370Z,1492165221.370 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0244.lzma.bak
2017-04-14T10:20:21.370Z,1492165221.370 [DataOverHttps](INFO): SBD MOMSN=4885756
2017-04-14T10:20:25.716Z,1492165225.716 [NAL9602](INFO): Powering down
2017-04-14T10:20:31.465Z,1492165231.464 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0245.lzma
2017-04-14T10:20:32.218Z,1492165232.218 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0245.lzma.bak
2017-04-14T10:20:32.218Z,1492165232.218 [DataOverHttps](INFO): SBD MOMSN=4885759
2017-04-14T10:20:32.789Z,1492165232.789 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:20:32.789Z,1492165232.789 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:20:32.789Z,1492165232.789 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:20:40.116Z,1492165240.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:20:40.912Z,1492165240.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:20:53.320Z,1492165253.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:20:54.116Z,1492165254.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:21:08.424Z,1492165268.424 [PNI_TCM](ERROR): CRC does not match. Expected:0x18877 got:0x46365
2017-04-14T10:21:10.035Z,1492165270.035 [PNI_TCM](ERROR): CRC does not match. Expected:0x38654 got:0x49280
2017-04-14T10:21:37.592Z,1492165297.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:21:38.388Z,1492165298.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:21:39.525Z,1492165299.524 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:21:39.525Z,1492165299.525 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:21:39.525Z,1492165299.525 [BPC1](ERROR): Communications Fault
2017-04-14T10:21:39.638Z,1492165299.638 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:21:40.576Z,1492165300.576 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:21:40.576Z,1492165300.576 [BPC1] No Fault, FailCount= 1
2017-04-14T10:21:57.106Z,1492165317.106 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:21:57.107Z,1492165317.107 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:21:57.107Z,1492165317.107 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:21:57.190Z,1492165317.190 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:21:57.412Z,1492165317.411 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:21:57.412Z,1492165317.412 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:21:57.815Z,1492165317.815 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:21:57.824Z,1492165317.824 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:21:57.824Z,1492165317.824 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:22:03.984Z,1492165323.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:22:04.780Z,1492165324.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:22:06.903Z,1492165326.903 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:22:06.903Z,1492165326.903 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:22:06.926Z,1492165326.926 [BPC1](ERROR): Data Fault
2017-04-14T10:22:06.984Z,1492165326.984 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:22:08.176Z,1492165328.177 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:22:08.177Z,1492165328.177 [BPC1] No Fault, FailCount= 1
2017-04-14T10:22:17.940Z,1492165337.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:22:18.736Z,1492165338.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:22:37.537Z,1492165357.537 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:23:01.450Z,1492165381.450 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:02.244Z,1492165382.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:08.806Z,1492165388.806 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:23:08.806Z,1492165388.806 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:23:08.806Z,1492165388.806 [BPC1](ERROR): Communications Fault
2017-04-14T10:23:08.904Z,1492165388.904 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:23:10.246Z,1492165390.246 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:23:10.246Z,1492165390.246 [BPC1] No Fault, FailCount= 1
2017-04-14T10:23:15.497Z,1492165395.497 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:16.300Z,1492165396.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:27.817Z,1492165407.817 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:28.612Z,1492165408.612 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:33.634Z,1492165413.634 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:23:33.634Z,1492165413.634 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:23:33.634Z,1492165413.634 [BPC1](ERROR): Communications Fault
2017-04-14T10:23:33.666Z,1492165413.666 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:23:37.797Z,1492165417.797 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:23:37.797Z,1492165417.797 [BPC1] No Fault, FailCount= 1
2017-04-14T10:23:41.084Z,1492165421.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:23:41.880Z,1492165421.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:24:15.727Z,1492165455.727 [PNI_TCM](ERROR): CRC does not match. Expected:0x50328 got:0x27164
2017-04-14T10:24:21.752Z,1492165461.751 [PNI_TCM](ERROR): CRC does not match. Expected:0x37463 got:0x1857
2017-04-14T10:24:24.925Z,1492165464.925 [PNI_TCM](ERROR): CRC does not match. Expected:0x15490 got:0x49444
2017-04-14T10:24:26.525Z,1492165466.525 [PNI_TCM](ERROR): CRC does not match. Expected:0x52273 got:0x54492
2017-04-14T10:24:51.036Z,1492165491.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:24:51.832Z,1492165491.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:24:58.127Z,1492165498.127 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:24:58.127Z,1492165498.127 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:24:58.127Z,1492165498.128 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:24:58.208Z,1492165498.208 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:24:58.625Z,1492165498.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:24:58.625Z,1492165498.625 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:24:58.898Z,1492165498.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:24:58.898Z,1492165498.898 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:24:58.899Z,1492165498.899 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:25:05.256Z,1492165505.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x4927 got:0x49444
2017-04-14T10:25:05.736Z,1492165505.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:25:06.532Z,1492165506.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:25:11.256Z,1492165511.256 [PNI_TCM](ERROR): CRC does not match. Expected:0x25471 got:0x32758
2017-04-14T10:25:21.261Z,1492165521.261 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:25:21.261Z,1492165521.261 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:25:21.261Z,1492165521.261 [BPC1](ERROR): Data Fault
2017-04-14T10:25:21.351Z,1492165521.351 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:25:22.538Z,1492165522.538 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:25:22.538Z,1492165522.538 [BPC1] No Fault, FailCount= 1
2017-04-14T10:25:33.285Z,1492165533.285 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:25:33.285Z,1492165533.285 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:25:33.285Z,1492165533.285 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:25:33.285Z,1492165533.285 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:25:33.702Z,1492165533.702 [Default:CheckIn:D] Stopped
2017-04-14T10:25:33.702Z,1492165533.702 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:25:34.090Z,1492165534.091 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 419.473047 min 
2017-04-14T10:25:34.091Z,1492165534.091 [Default:CheckIn:E] Stopped
2017-04-14T10:25:34.115Z,1492165534.115 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:25:34.115Z,1492165534.115 [Default:CheckIn] Stopped
2017-04-14T10:25:34.115Z,1492165534.115 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:25:34.116Z,1492165534.116 [Default:CheckIn](INFO): Running loop #61
2017-04-14T10:25:34.116Z,1492165534.116 [Default:CheckIn] Running Loop=61
2017-04-14T10:25:34.116Z,1492165534.116 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:25:34.116Z,1492165534.116 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:25:37.772Z,1492165537.772 [NAL9602](INFO): Powering up
2017-04-14T10:25:48.573Z,1492165548.573 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:25:49.216Z,1492165549.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:25:50.012Z,1492165550.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:26:15.568Z,1492165575.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:26:16.368Z,1492165576.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:26:29.624Z,1492165589.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:26:30.420Z,1492165590.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:26:53.488Z,1492165613.489 [PNI_TCM](ERROR): CRC does not match. Expected:0x2809 got:0x6663
2017-04-14T10:27:04.674Z,1492165624.674 [PNI_TCM](ERROR): CRC does not match. Expected:0x12998 got:0x57843
2017-04-14T10:27:20.238Z,1492165640.238 [NAL9602](INFO): SBD MO Status=0, MOMSN=2154, MT Status=0, MTMSN=0
2017-04-14T10:27:20.238Z,1492165640.238 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:27:21.449Z,1492165641.448 [NAL9602](INFO): GPS fix at 20170414T102759: (36.802330, -121.787117)
2017-04-14T10:27:21.543Z,1492165641.543 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:27:21.543Z,1492165641.543 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:27:26.756Z,1492165646.756 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0248.lzma
2017-04-14T10:27:27.538Z,1492165647.538 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0248.lzma.bak
2017-04-14T10:27:27.538Z,1492165647.538 [DataOverHttps](INFO): SBD MOMSN=4885764
2017-04-14T10:27:32.316Z,1492165652.316 [NAL9602](INFO): Powering down
2017-04-14T10:27:37.660Z,1492165657.660 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0249.lzma
2017-04-14T10:27:38.466Z,1492165658.466 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0249.lzma.bak
2017-04-14T10:27:38.466Z,1492165658.466 [DataOverHttps](INFO): SBD MOMSN=4885767
2017-04-14T10:27:39.031Z,1492165659.031 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:27:39.031Z,1492165659.031 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:27:39.031Z,1492165659.031 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:27:39.448Z,1492165659.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:27:40.244Z,1492165660.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:27:53.460Z,1492165673.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:27:54.256Z,1492165674.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:27:59.052Z,1492165679.052 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:27:59.052Z,1492165679.053 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:27:59.052Z,1492165679.053 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:27:59.066Z,1492165679.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:27:59.493Z,1492165679.493 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:27:59.493Z,1492165679.493 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:27:59.868Z,1492165679.868 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:27:59.868Z,1492165679.868 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:27:59.869Z,1492165679.869 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:28:49.336Z,1492165729.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:28:50.132Z,1492165730.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:29:03.364Z,1492165743.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:29:04.160Z,1492165744.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:29:46.768Z,1492165786.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:29:47.564Z,1492165787.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:00.752Z,1492165800.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:01.548Z,1492165801.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:13.264Z,1492165813.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:14.060Z,1492165814.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:14.728Z,1492165814.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:15.524Z,1492165815.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:27.164Z,1492165827.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:27.960Z,1492165827.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:30:43.887Z,1492165843.887 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:30:43.887Z,1492165843.887 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:30:43.887Z,1492165843.887 [BPC1](ERROR): Communications Fault
2017-04-14T10:30:43.975Z,1492165843.975 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:30:44.888Z,1492165844.888 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:30:44.888Z,1492165844.888 [BPC1] No Fault, FailCount= 1
2017-04-14T10:31:00.062Z,1492165860.062 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:31:00.062Z,1492165860.062 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:31:00.062Z,1492165860.062 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:31:00.075Z,1492165860.075 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:31:00.475Z,1492165860.475 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:31:00.475Z,1492165860.475 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:31:00.871Z,1492165860.871 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:31:00.875Z,1492165860.875 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:31:00.876Z,1492165860.876 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:31:10.668Z,1492165870.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:11.465Z,1492165871.465 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:36.296Z,1492165896.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:37.092Z,1492165897.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:51.106Z,1492165911.106 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:51.902Z,1492165911.902 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:31:57.129Z,1492165917.129 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:31:57.130Z,1492165917.129 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:31:57.130Z,1492165917.129 [BPC1](ERROR): Data Fault
2017-04-14T10:31:57.193Z,1492165917.193 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:31:58.394Z,1492165918.394 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:31:58.394Z,1492165918.395 [BPC1] No Fault, FailCount= 1
2017-04-14T10:32:20.544Z,1492165940.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:21.341Z,1492165941.341 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:22.136Z,1492165942.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:22.548Z,1492165942.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:23.346Z,1492165943.346 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:24.104Z,1492165944.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:24.900Z,1492165944.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:25.696Z,1492165945.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:26.100Z,1492165946.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:26.896Z,1492165946.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:27.692Z,1492165947.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:28.128Z,1492165948.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:28.924Z,1492165948.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:29.720Z,1492165949.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:30.132Z,1492165950.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:30.928Z,1492165950.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:31.726Z,1492165951.726 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:32.184Z,1492165952.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:32.980Z,1492165952.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:33.776Z,1492165953.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:34.524Z,1492165954.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:35.321Z,1492165955.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:36.116Z,1492165956.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:36.520Z,1492165956.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:37.316Z,1492165957.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:37.618Z,1492165957.618 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:32:38.096Z,1492165958.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:39.562Z,1492165959.562 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:32:39.562Z,1492165959.562 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:32:39.562Z,1492165959.562 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:32:39.562Z,1492165959.562 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:32:39.969Z,1492165959.969 [Default:CheckIn:D] Stopped
2017-04-14T10:32:39.969Z,1492165959.969 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:32:40.364Z,1492165960.364 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 426.577507 min 
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn:E] Stopped
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn] Stopped
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn](INFO): Running loop #62
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn] Running Loop=62
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:32:40.365Z,1492165960.365 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:32:44.060Z,1492165964.060 [NAL9602](INFO): Powering up
2017-04-14T10:32:48.560Z,1492165968.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:49.356Z,1492165969.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:32:55.201Z,1492165975.201 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:32:55.695Z,1492165975.695 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:32:55.695Z,1492165975.695 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:32:55.696Z,1492165975.695 [BPC1](ERROR): Data Fault
2017-04-14T10:32:55.767Z,1492165975.767 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:32:56.877Z,1492165976.878 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:32:56.878Z,1492165976.878 [BPC1] No Fault, FailCount= 1
2017-04-14T10:33:00.968Z,1492165980.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:33:01.764Z,1492165981.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:33:08.029Z,1492165988.029 [BPC1](ERROR): Failed to parse message.
2017-04-14T10:33:08.029Z,1492165988.029 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:33:08.029Z,1492165988.029 [BPC1] Data Fault, FailCount= 2
2017-04-14T10:33:08.029Z,1492165988.029 [BPC1](ERROR): Data Fault
2017-04-14T10:33:08.108Z,1492165988.108 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:33:09.320Z,1492165989.320 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:33:09.320Z,1492165989.320 [BPC1] No Fault, FailCount= 2
2017-04-14T10:33:14.984Z,1492165994.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:33:15.780Z,1492165995.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:34:01.086Z,1492166041.086 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:34:01.086Z,1492166041.086 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T10:34:01.086Z,1492166041.086 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:34:01.125Z,1492166041.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:34:01.565Z,1492166041.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:34:01.565Z,1492166041.565 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T10:34:01.865Z,1492166041.865 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:34:01.866Z,1492166041.866 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:34:01.866Z,1492166041.866 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:34:24.808Z,1492166064.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:34:25.604Z,1492166065.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:34:38.796Z,1492166078.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:34:39.592Z,1492166079.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:22.312Z,1492166122.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:23.108Z,1492166123.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:36.284Z,1492166136.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:37.081Z,1492166137.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:48.660Z,1492166148.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:35:49.456Z,1492166149.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:36:02.644Z,1492166162.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:36:03.440Z,1492166163.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:36:45.060Z,1492166205.060 [NAL9602](INFO): SBD MO Status=2, MOMSN=2155, MT Status=2, MTMSN=0
2017-04-14T10:36:45.060Z,1492166205.060 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:36:46.128Z,1492166206.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:36:46.924Z,1492166206.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:37:01.931Z,1492166221.931 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:37:01.931Z,1492166221.931 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2017-04-14T10:37:01.931Z,1492166221.931 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:37:01.945Z,1492166221.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:37:02.262Z,1492166222.262 [NAL9602](INFO): SBD MO Status=2, MOMSN=2155, MT Status=2, MTMSN=0
2017-04-14T10:37:02.262Z,1492166222.262 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:37:02.355Z,1492166222.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:37:02.355Z,1492166222.355 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2017-04-14T10:37:02.764Z,1492166222.764 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:37:02.764Z,1492166222.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:37:02.764Z,1492166222.764 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:37:12.548Z,1492166232.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:37:13.344Z,1492166233.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:37:26.512Z,1492166246.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:37:27.310Z,1492166247.310 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:37:30.658Z,1492166250.658 [NAL9602](INFO): SBD MO Status=2, MOMSN=2155, MT Status=2, MTMSN=0
2017-04-14T10:37:30.658Z,1492166250.658 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:37:40.711Z,1492166260.711 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-04-14T10:32:40.4Z
2017-04-14T10:37:40.711Z,1492166260.711 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:37:40.711Z,1492166260.711 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:37:44.863Z,1492166264.863 [NAL9602](INFO): SBD MO Status=0, MOMSN=2155, MT Status=0, MTMSN=0
2017-04-14T10:37:44.863Z,1492166264.864 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:37:45.056Z,1492166265.056 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0252.lzma
2017-04-14T10:37:45.834Z,1492166265.834 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0252.lzma.bak
2017-04-14T10:37:45.834Z,1492166265.834 [DataOverHttps](INFO): SBD MOMSN=4885794
2017-04-14T10:37:50.319Z,1492166270.319 [NAL9602](INFO): Powering down
2017-04-14T10:37:56.203Z,1492166276.203 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0253.lzma
2017-04-14T10:37:57.002Z,1492166277.002 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0253.lzma.bak
2017-04-14T10:37:57.002Z,1492166277.002 [DataOverHttps](INFO): SBD MOMSN=4885796
2017-04-14T10:37:57.484Z,1492166277.484 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:37:57.484Z,1492166277.484 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:37:57.484Z,1492166277.484 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:38:10.014Z,1492166290.013 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:38:10.808Z,1492166290.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:38:36.406Z,1492166316.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:38:37.200Z,1492166317.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:38:46.645Z,1492166326.645 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:38:46.645Z,1492166326.645 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:38:46.645Z,1492166326.645 [BPC1](ERROR): Data Fault
2017-04-14T10:38:46.702Z,1492166326.702 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:38:47.897Z,1492166327.897 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:38:47.897Z,1492166327.897 [BPC1] No Fault, FailCount= 1
2017-04-14T10:38:50.413Z,1492166330.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:38:51.208Z,1492166331.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:39:43.613Z,1492166383.613 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:39:43.613Z,1492166383.613 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:39:43.613Z,1492166383.614 [BPC1](ERROR): Data Fault
2017-04-14T10:39:43.668Z,1492166383.668 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:39:44.848Z,1492166384.848 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:39:44.848Z,1492166384.848 [BPC1] No Fault, FailCount= 1
2017-04-14T10:39:59.508Z,1492166399.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:40:00.304Z,1492166400.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:40:03.137Z,1492166403.137 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:40:03.137Z,1492166403.137 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2017-04-14T10:40:03.137Z,1492166403.137 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:40:03.159Z,1492166403.159 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:40:03.543Z,1492166403.543 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:40:03.543Z,1492166403.543 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2017-04-14T10:40:03.929Z,1492166403.929 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:40:03.930Z,1492166403.930 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:40:03.930Z,1492166403.930 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:40:13.508Z,1492166413.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:40:14.281Z,1492166414.281 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:40:14.281Z,1492166414.281 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:40:14.281Z,1492166414.281 [BPC1](ERROR): Data Fault
2017-04-14T10:40:14.304Z,1492166414.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:40:14.357Z,1492166414.357 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:40:15.542Z,1492166415.542 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:40:15.542Z,1492166415.542 [BPC1] No Fault, FailCount= 1
2017-04-14T10:41:24.144Z,1492166484.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:41:24.940Z,1492166484.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:41:38.132Z,1492166498.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:41:38.928Z,1492166498.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:42:21.600Z,1492166541.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:42:22.397Z,1492166542.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:42:37.847Z,1492166557.847 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:42:45.814Z,1492166565.815 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:42:45.815Z,1492166565.815 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:42:45.815Z,1492166565.815 [BPC1](ERROR): Communications Fault
2017-04-14T10:42:45.877Z,1492166565.877 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:42:47.068Z,1492166567.068 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:42:47.068Z,1492166567.068 [BPC1] No Fault, FailCount= 1
2017-04-14T10:42:48.028Z,1492166568.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:42:48.826Z,1492166568.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:42:58.227Z,1492166578.227 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:42:58.227Z,1492166578.227 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:42:58.227Z,1492166578.227 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:42:58.227Z,1492166578.227 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:42:58.711Z,1492166578.711 [Default:CheckIn:D] Stopped
2017-04-14T10:42:58.711Z,1492166578.711 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:42:59.065Z,1492166579.065 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 436.889876 min 
2017-04-14T10:42:59.065Z,1492166579.066 [Default:CheckIn:E] Stopped
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn] Stopped
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn](INFO): Running loop #63
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn] Running Loop=63
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:42:59.066Z,1492166579.066 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:43:02.851Z,1492166582.851 [NAL9602](INFO): Powering up
2017-04-14T10:43:04.283Z,1492166584.283 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:43:04.283Z,1492166584.283 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2017-04-14T10:43:04.283Z,1492166584.283 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:43:04.297Z,1492166584.297 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:43:04.699Z,1492166584.699 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:43:04.699Z,1492166584.699 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2017-04-14T10:43:05.161Z,1492166585.161 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:43:05.162Z,1492166585.162 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:43:05.175Z,1492166585.175 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:43:13.789Z,1492166593.789 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:43:14.585Z,1492166594.585 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-04-14T10:43:14.585Z,1492166594.585 [NAL9602] Data Fault, FailCount= 1
2017-04-14T10:43:14.585Z,1492166594.585 [NAL9602](ERROR): Data Fault
2017-04-14T10:43:14.702Z,1492166594.702 [CBIT](ERROR): Data Fault in component: NAL9602
2017-04-14T10:43:14.993Z,1492166594.993 [NAL9602](INFO): Powering down
2017-04-14T10:43:15.950Z,1492166595.950 [CBIT](INFO): Clearing failed state for component NAL9602
2017-04-14T10:43:15.950Z,1492166595.950 [NAL9602] No Fault, FailCount= 1
2017-04-14T10:43:20.192Z,1492166600.193 [NAL9602](INFO): Powering up NAL9602
2017-04-14T10:43:31.394Z,1492166611.394 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:43:45.524Z,1492166625.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:43:46.321Z,1492166626.321 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:43:57.928Z,1492166637.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:43:58.724Z,1492166638.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:44:05.167Z,1492166645.167 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:44:05.167Z,1492166645.167 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:44:05.168Z,1492166645.168 [BPC1](ERROR): Communications Fault
2017-04-14T10:44:05.290Z,1492166645.290 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:44:06.232Z,1492166646.232 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:44:06.232Z,1492166646.232 [BPC1] No Fault, FailCount= 1
2017-04-14T10:44:11.908Z,1492166651.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:44:12.704Z,1492166652.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:44:28.985Z,1492166668.985 [NAL9602](INFO): SBD MO Status=2, MOMSN=2156, MT Status=2, MTMSN=0
2017-04-14T10:44:28.985Z,1492166668.985 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:45:03.345Z,1492166703.345 [NAL9602](INFO): SBD MO Status=2, MOMSN=2156, MT Status=2, MTMSN=0
2017-04-14T10:45:03.346Z,1492166703.346 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:45:09.918Z,1492166709.918 [NAL9602](INFO): SBD MO Status=0, MOMSN=2156, MT Status=0, MTMSN=0
2017-04-14T10:45:09.918Z,1492166709.918 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:45:11.128Z,1492166711.128 [NAL9602](INFO): GPS fix at 20170414T104550: (36.802333, -121.787120)
2017-04-14T10:45:11.211Z,1492166711.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 1102.94, recording fix residuals...
2017-04-14T10:45:11.239Z,1492166711.239 [UniversalFixResidualReporter](INFO): Fix residual: 100.0 %DT, over the last 1102.9 m. Residual distance 1103.2 m at bearing -156.0 degrees. Fix at (36.8023, -121.7871) with 0.4 m made good.
2017-04-14T10:45:11.240Z,1492166711.240 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:45:11.240Z,1492166711.240 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:45:16.924Z,1492166716.924 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0256.lzma
2017-04-14T10:45:17.710Z,1492166717.710 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0256.lzma.bak
2017-04-14T10:45:17.710Z,1492166717.710 [DataOverHttps](INFO): SBD MOMSN=4885801
2017-04-14T10:45:18.146Z,1492166718.146 [NAL9602](INFO): Powering down
2017-04-14T10:45:21.800Z,1492166721.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:45:22.596Z,1492166722.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:45:28.126Z,1492166728.126 [DataOverHttps](INFO): Sending 178 bytes from file Logs/20170414T032153/Express0257.lzma
2017-04-14T10:45:28.899Z,1492166728.899 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0257.lzma.bak
2017-04-14T10:45:28.899Z,1492166728.899 [DataOverHttps](INFO): SBD MOMSN=4885804
2017-04-14T10:45:29.387Z,1492166729.387 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:45:29.387Z,1492166729.387 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:45:29.387Z,1492166729.387 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:45:35.776Z,1492166735.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:45:36.572Z,1492166736.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:03.097Z,1492166763.097 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:46:03.097Z,1492166763.097 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:46:03.097Z,1492166763.098 [BPC1](ERROR): Data Fault
2017-04-14T10:46:03.161Z,1492166763.161 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:46:04.368Z,1492166764.368 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:46:04.368Z,1492166764.368 [BPC1] No Fault, FailCount= 1
2017-04-14T10:46:05.540Z,1492166765.540 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:46:05.540Z,1492166765.540 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:46:05.540Z,1492166765.540 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:46:05.605Z,1492166765.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:46:05.946Z,1492166765.946 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:46:05.946Z,1492166765.946 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:46:06.377Z,1492166766.378 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:46:06.378Z,1492166766.378 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:46:06.378Z,1492166766.378 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:46:33.237Z,1492166793.237 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:34.032Z,1492166794.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:45.744Z,1492166805.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:46.540Z,1492166806.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:47.252Z,1492166807.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:48.048Z,1492166808.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:58.892Z,1492166818.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:46:59.688Z,1492166819.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:47:57.144Z,1492166877.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:47:57.940Z,1492166877.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:48:09.568Z,1492166889.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:48:10.364Z,1492166890.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:48:22.748Z,1492166902.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:48:23.544Z,1492166903.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:48:47.079Z,1492166927.079 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:48:47.079Z,1492166927.079 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:48:47.079Z,1492166927.079 [BPC1](ERROR): Data Fault
2017-04-14T10:48:47.186Z,1492166927.186 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:48:48.426Z,1492166928.426 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:48:48.426Z,1492166928.426 [BPC1] No Fault, FailCount= 1
2017-04-14T10:49:06.695Z,1492166946.695 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:49:06.695Z,1492166946.695 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:49:06.695Z,1492166946.695 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:49:06.710Z,1492166946.710 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:49:07.132Z,1492166947.132 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:49:07.132Z,1492166947.132 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:49:07.499Z,1492166947.499 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:49:07.500Z,1492166947.500 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:49:07.500Z,1492166947.500 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:49:32.680Z,1492166972.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:49:33.484Z,1492166973.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:49:47.360Z,1492166987.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:49:48.157Z,1492166988.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:50:04.668Z,1492167004.668 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:50:04.668Z,1492167004.668 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:50:04.669Z,1492167004.668 [BPC1](ERROR): Communications Fault
2017-04-14T10:50:04.724Z,1492167004.724 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:50:05.896Z,1492167005.896 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:50:05.896Z,1492167005.896 [BPC1] No Fault, FailCount= 1
2017-04-14T10:50:29.911Z,1492167029.911 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:50:29.931Z,1492167029.931 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:50:29.931Z,1492167029.931 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:50:29.931Z,1492167029.931 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:50:30.305Z,1492167030.305 [Default:CheckIn:D] Stopped
2017-04-14T10:50:30.305Z,1492167030.305 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:50:30.713Z,1492167030.713 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 444.416439 min 
2017-04-14T10:50:30.713Z,1492167030.713 [Default:CheckIn:E] Stopped
2017-04-14T10:50:30.713Z,1492167030.713 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:50:30.713Z,1492167030.713 [Default:CheckIn] Stopped
2017-04-14T10:50:30.713Z,1492167030.713 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:50:30.714Z,1492167030.714 [Default:CheckIn](INFO): Running loop #64
2017-04-14T10:50:30.714Z,1492167030.714 [Default:CheckIn] Running Loop=64
2017-04-14T10:50:30.714Z,1492167030.714 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:50:30.714Z,1492167030.714 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:50:35.587Z,1492167035.587 [NAL9602](INFO): Powering up
2017-04-14T10:50:46.794Z,1492167046.793 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:51:10.564Z,1492167070.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:51:11.360Z,1492167071.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:51:12.809Z,1492167072.809 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:51:12.809Z,1492167072.809 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:51:12.809Z,1492167072.809 [BPC1](ERROR): Communications Fault
2017-04-14T10:51:12.873Z,1492167072.873 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:51:14.094Z,1492167074.094 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:51:14.094Z,1492167074.094 [BPC1] No Fault, FailCount= 1
2017-04-14T10:51:30.021Z,1492167090.021 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:51:30.021Z,1492167090.021 [BPC1] Communications Fault, FailCount= 2
2017-04-14T10:51:30.021Z,1492167090.021 [BPC1](ERROR): Communications Fault
2017-04-14T10:51:30.054Z,1492167090.054 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:51:34.955Z,1492167094.955 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:51:34.955Z,1492167094.955 [BPC1] No Fault, FailCount= 2
2017-04-14T10:51:54.784Z,1492167114.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:51:55.188Z,1492167115.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:51:55.786Z,1492167115.786 [NAL9602](INFO): SBD MO Status=2, MOMSN=2157, MT Status=2, MTMSN=0
2017-04-14T10:51:55.786Z,1492167115.786 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T10:52:07.944Z,1492167127.944 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:52:07.944Z,1492167127.944 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T10:52:07.944Z,1492167127.944 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:52:07.999Z,1492167127.999 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:52:08.432Z,1492167128.432 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:52:08.432Z,1492167128.432 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T10:52:08.698Z,1492167128.698 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:52:08.698Z,1492167128.698 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:52:08.699Z,1492167128.699 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:52:21.168Z,1492167141.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:52:21.964Z,1492167141.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:52:34.616Z,1492167154.616 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:52:34.616Z,1492167154.616 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:52:34.616Z,1492167154.616 [BPC1](ERROR): Communications Fault
2017-04-14T10:52:34.702Z,1492167154.702 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:52:35.624Z,1492167155.624 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:52:35.624Z,1492167155.624 [BPC1] No Fault, FailCount= 1
2017-04-14T10:52:37.992Z,1492167157.992 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T10:53:04.608Z,1492167184.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:53:05.404Z,1492167185.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:53:19.133Z,1492167199.133 [NAL9602](INFO): SBD MO Status=0, MOMSN=2157, MT Status=0, MTMSN=0
2017-04-14T10:53:19.133Z,1492167199.133 [NAL9602](INFO): No messages in MT queue
2017-04-14T10:53:20.344Z,1492167200.344 [NAL9602](INFO): GPS fix at 20170414T105400: (36.802349, -121.787134)
2017-04-14T10:53:20.393Z,1492167200.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 504.403, recording fix residuals...
2017-04-14T10:53:20.435Z,1492167200.435 [UniversalFixResidualReporter](INFO): Fix residual: 100.2 %DT, over the last 504.4 m. Residual distance 505.5 m at bearing -156.3 degrees. Fix at (36.8023, -121.7871) with 2.2 m made good.
2017-04-14T10:53:20.436Z,1492167200.436 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T10:53:20.436Z,1492167200.436 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T10:53:25.473Z,1492167205.473 [DataOverHttps](INFO): Sending 88 bytes from file Logs/20170414T032153/Courier0260.lzma
2017-04-14T10:53:26.270Z,1492167206.270 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0260.lzma.bak
2017-04-14T10:53:26.271Z,1492167206.270 [DataOverHttps](INFO): SBD MOMSN=4885809
2017-04-14T10:53:30.587Z,1492167210.587 [NAL9602](INFO): Powering down
2017-04-14T10:53:31.036Z,1492167211.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:53:31.832Z,1492167211.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:53:35.989Z,1492167215.990 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0261.lzma
2017-04-14T10:53:36.758Z,1492167216.758 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0261.lzma.bak
2017-04-14T10:53:36.758Z,1492167216.758 [DataOverHttps](INFO): SBD MOMSN=4885812
2017-04-14T10:53:37.716Z,1492167217.716 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T10:53:37.716Z,1492167217.716 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T10:53:37.716Z,1492167217.716 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T10:53:44.264Z,1492167224.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:53:45.060Z,1492167225.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:54:00.987Z,1492167240.987 [BPC1](ERROR): Failed to parse message.
2017-04-14T10:54:00.987Z,1492167240.987 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T10:54:00.987Z,1492167240.987 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:54:00.987Z,1492167240.987 [BPC1](ERROR): Data Fault
2017-04-14T10:54:01.018Z,1492167241.018 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:54:02.228Z,1492167242.228 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:54:02.228Z,1492167242.228 [BPC1] No Fault, FailCount= 1
2017-04-14T10:54:18.162Z,1492167258.162 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:54:18.162Z,1492167258.162 [BPC1] Communications Fault, FailCount= 2
2017-04-14T10:54:18.162Z,1492167258.162 [BPC1](ERROR): Communications Fault
2017-04-14T10:54:18.234Z,1492167258.234 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:54:19.433Z,1492167259.432 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:54:19.433Z,1492167259.432 [BPC1] No Fault, FailCount= 2
2017-04-14T10:54:54.160Z,1492167294.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:54:54.956Z,1492167294.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:55:08.124Z,1492167308.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:55:08.888Z,1492167308.888 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:55:08.888Z,1492167308.888 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T10:55:08.888Z,1492167308.888 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:55:08.914Z,1492167308.914 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:55:08.920Z,1492167308.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:55:09.294Z,1492167309.294 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:55:09.294Z,1492167309.294 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T10:55:09.697Z,1492167309.697 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:55:09.698Z,1492167309.698 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:55:09.698Z,1492167309.698 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:55:10.062Z,1492167310.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x61278 got:0x49447
2017-04-14T10:55:52.348Z,1492167352.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:55:53.144Z,1492167353.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:56:18.756Z,1492167378.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:56:19.552Z,1492167379.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:56:32.740Z,1492167392.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:56:33.536Z,1492167393.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:56:56.842Z,1492167416.842 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T10:56:56.842Z,1492167416.842 [BPC1] Data Fault, FailCount= 1
2017-04-14T10:56:56.842Z,1492167416.842 [BPC1](ERROR): Data Fault
2017-04-14T10:56:56.898Z,1492167416.898 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T10:56:58.146Z,1492167418.146 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:56:58.146Z,1492167418.146 [BPC1] No Fault, FailCount= 1
2017-04-14T10:57:16.228Z,1492167436.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:17.024Z,1492167437.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:30.208Z,1492167450.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:31.004Z,1492167451.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:41.872Z,1492167461.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:42.668Z,1492167462.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:56.632Z,1492167476.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:57:57.428Z,1492167477.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:58:09.757Z,1492167489.757 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T10:58:09.757Z,1492167489.757 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T10:58:09.757Z,1492167489.757 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T10:58:09.788Z,1492167489.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T10:58:10.205Z,1492167490.204 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T10:58:10.205Z,1492167490.205 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T10:58:10.546Z,1492167490.546 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T10:58:10.546Z,1492167490.546 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T10:58:10.547Z,1492167490.546 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T10:58:38.129Z,1492167518.129 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T10:58:38.129Z,1492167518.129 [Default:CheckIn:C.Wait] Stopped
2017-04-14T10:58:38.129Z,1492167518.129 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T10:58:38.129Z,1492167518.129 [Default:CheckIn:D] Running Loop=1
2017-04-14T10:58:38.546Z,1492167518.546 [Default:CheckIn:D] Stopped
2017-04-14T10:58:38.546Z,1492167518.546 [Default:CheckIn:E] Running Loop=1
2017-04-14T10:58:38.993Z,1492167518.993 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 452.553776 min 
2017-04-14T10:58:38.993Z,1492167518.993 [Default:CheckIn:E] Stopped
2017-04-14T10:58:38.993Z,1492167518.993 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T10:58:38.993Z,1492167518.993 [Default:CheckIn] Stopped
2017-04-14T10:58:38.993Z,1492167518.993 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T10:58:38.994Z,1492167518.994 [Default:CheckIn](INFO): Running loop #65
2017-04-14T10:58:38.994Z,1492167518.994 [Default:CheckIn] Running Loop=65
2017-04-14T10:58:38.994Z,1492167518.994 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T10:58:38.994Z,1492167518.994 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T10:58:43.889Z,1492167523.889 [NAL9602](INFO): Powering up
2017-04-14T10:58:55.065Z,1492167535.065 [NAL9602](INFO): NAL9602 initialized
2017-04-14T10:59:06.492Z,1492167546.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:59:07.288Z,1492167547.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:59:20.474Z,1492167560.474 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:59:21.268Z,1492167561.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T10:59:45.163Z,1492167585.163 [BPC1](ERROR): Failed to receive battery data
2017-04-14T10:59:45.163Z,1492167585.164 [BPC1] Communications Fault, FailCount= 1
2017-04-14T10:59:45.164Z,1492167585.164 [BPC1](ERROR): Communications Fault
2017-04-14T10:59:45.254Z,1492167585.254 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T10:59:46.386Z,1492167586.386 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T10:59:46.387Z,1492167586.386 [BPC1] No Fault, FailCount= 1
2017-04-14T11:00:03.984Z,1492167603.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:00:04.780Z,1492167604.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:00:14.710Z,1492167614.710 [NAL9602](INFO): SBD MO Status=0, MOMSN=2158, MT Status=0, MTMSN=0
2017-04-14T11:00:14.710Z,1492167614.710 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:00:15.937Z,1492167615.937 [NAL9602](INFO): GPS fix at 20170414T110057: (36.802330, -121.787136)
2017-04-14T11:00:16.133Z,1492167616.133 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:00:16.133Z,1492167616.133 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:00:23.060Z,1492167623.060 [DataOverHttps](INFO): Sending 81 bytes from file Logs/20170414T032153/Courier0264.lzma
2017-04-14T11:00:23.786Z,1492167623.786 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0264.lzma.bak
2017-04-14T11:00:23.786Z,1492167623.786 [DataOverHttps](INFO): SBD MOMSN=4885816
2017-04-14T11:00:28.220Z,1492167628.220 [NAL9602](INFO): Powering down
2017-04-14T11:00:29.632Z,1492167629.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:00:30.428Z,1492167630.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:00:34.012Z,1492167634.012 [DataOverHttps](INFO): Sending 137 bytes from file Logs/20170414T032153/Express0265.lzma
2017-04-14T11:00:35.024Z,1492167635.024 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0265.lzma.bak
2017-04-14T11:00:35.025Z,1492167635.025 [DataOverHttps](INFO): SBD MOMSN=4885819
2017-04-14T11:00:35.320Z,1492167635.320 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:00:35.320Z,1492167635.320 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:00:35.320Z,1492167635.320 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:01:10.623Z,1492167670.623 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:01:10.623Z,1492167670.623 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:01:10.623Z,1492167670.624 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:01:10.650Z,1492167670.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:01:11.209Z,1492167671.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:01:11.209Z,1492167671.209 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:01:11.415Z,1492167671.415 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:01:11.415Z,1492167671.415 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:01:11.416Z,1492167671.416 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:01:27.924Z,1492167687.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:01:28.328Z,1492167688.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:01:53.436Z,1492167713.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:01:54.232Z,1492167714.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:02:10.693Z,1492167730.693 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:02:10.693Z,1492167730.693 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:02:10.693Z,1492167730.693 [BPC1](ERROR): Communications Fault
2017-04-14T11:02:10.752Z,1492167730.752 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:02:11.934Z,1492167731.934 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:02:11.934Z,1492167731.934 [BPC1] No Fault, FailCount= 1
2017-04-14T11:02:40.171Z,1492167760.171 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:03:03.364Z,1492167783.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:03:04.164Z,1492167784.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:03:18.105Z,1492167798.105 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:03:18.900Z,1492167798.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:04:11.624Z,1492167851.624 [PNI_TCM](ERROR): CRC does not match. Expected:0x56407 got:0x15387
2017-04-14T11:04:11.670Z,1492167851.671 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:04:11.671Z,1492167851.671 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:04:11.671Z,1492167851.671 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:04:11.700Z,1492167851.700 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:04:12.111Z,1492167852.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:04:12.112Z,1492167852.112 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:04:12.450Z,1492167852.450 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:04:12.451Z,1492167852.451 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:04:12.451Z,1492167852.451 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:04:14.820Z,1492167854.820 [PNI_TCM](ERROR): CRC does not match. Expected:0x43077 got:0x1345
2017-04-14T11:04:18.021Z,1492167858.021 [PNI_TCM](ERROR): CRC does not match. Expected:0x631 got:0x9486
2017-04-14T11:04:28.040Z,1492167868.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:04:28.836Z,1492167868.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:04:42.012Z,1492167882.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:04:42.808Z,1492167882.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:05:35.740Z,1492167935.740 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:05:35.741Z,1492167935.741 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:05:35.741Z,1492167935.741 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:05:35.741Z,1492167935.741 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:05:36.141Z,1492167936.141 [Default:CheckIn:D] Stopped
2017-04-14T11:05:36.141Z,1492167936.141 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:05:36.587Z,1492167936.587 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 459.513704 min 
2017-04-14T11:05:36.595Z,1492167936.595 [Default:CheckIn:E] Stopped
2017-04-14T11:05:36.595Z,1492167936.595 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:05:36.595Z,1492167936.595 [Default:CheckIn] Stopped
2017-04-14T11:05:36.595Z,1492167936.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:05:36.596Z,1492167936.596 [Default:CheckIn](INFO): Running loop #66
2017-04-14T11:05:36.596Z,1492167936.596 [Default:CheckIn] Running Loop=66
2017-04-14T11:05:36.596Z,1492167936.596 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:05:36.596Z,1492167936.596 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:05:41.060Z,1492167941.060 [NAL9602](INFO): Powering up
2017-04-14T11:05:51.913Z,1492167951.913 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:05:52.157Z,1492167952.157 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:05:52.708Z,1492167952.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:06:13.766Z,1492167973.766 [NAL9602](INFO): SBD MO Status=0, MOMSN=2159, MT Status=0, MTMSN=0
2017-04-14T11:06:13.766Z,1492167973.766 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:06:20.562Z,1492167980.562 [NAL9602](INFO): GPS fix at 20170414T110702: (36.802346, -121.787153)
2017-04-14T11:06:20.648Z,1492167980.648 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:06:20.648Z,1492167980.648 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:06:26.205Z,1492167986.204 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0268.lzma
2017-04-14T11:06:27.007Z,1492167987.007 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0268.lzma.bak
2017-04-14T11:06:27.008Z,1492167987.008 [DataOverHttps](INFO): SBD MOMSN=4885823
2017-04-14T11:06:31.276Z,1492167991.276 [NAL9602](INFO): Powering down
2017-04-14T11:06:37.296Z,1492167997.296 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0269.lzma
2017-04-14T11:06:38.117Z,1492167998.117 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0269.lzma.bak
2017-04-14T11:06:38.117Z,1492167998.117 [DataOverHttps](INFO): SBD MOMSN=4885826
2017-04-14T11:06:38.554Z,1492167998.554 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:06:38.554Z,1492167998.554 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:06:38.554Z,1492167998.554 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:06:49.358Z,1492168009.358 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:06:50.153Z,1492168010.153 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:01.828Z,1492168021.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:02.624Z,1492168022.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:03.361Z,1492168023.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:04.156Z,1492168024.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:12.504Z,1492168032.504 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:07:12.505Z,1492168032.505 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:07:12.505Z,1492168032.505 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:07:12.550Z,1492168032.550 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:07:12.883Z,1492168032.883 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:07:12.883Z,1492168032.883 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:07:13.257Z,1492168033.257 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:07:13.258Z,1492168033.258 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:07:13.258Z,1492168033.258 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:07:15.760Z,1492168035.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:16.556Z,1492168036.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:07:59.212Z,1492168079.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:08:00.008Z,1492168080.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:08:27.200Z,1492168107.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:08:28.001Z,1492168108.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:08:39.610Z,1492168119.610 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:08:40.408Z,1492168120.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:09:23.108Z,1492168163.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:09:23.905Z,1492168163.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:09:30.941Z,1492168170.941 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:09:30.941Z,1492168170.941 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:09:30.941Z,1492168170.941 [BPC1](ERROR): Communications Fault
2017-04-14T11:09:31.010Z,1492168171.010 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:09:32.266Z,1492168172.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:09:32.267Z,1492168172.267 [BPC1] No Fault, FailCount= 1
2017-04-14T11:09:49.532Z,1492168189.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:09:50.328Z,1492168190.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:10:03.528Z,1492168203.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:10:04.324Z,1492168204.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:10:13.475Z,1492168213.475 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:10:13.475Z,1492168213.475 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:10:13.475Z,1492168213.475 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:10:13.489Z,1492168213.489 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:10:13.846Z,1492168213.846 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:10:13.846Z,1492168213.846 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:10:14.288Z,1492168214.288 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:10:14.288Z,1492168214.288 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:10:14.289Z,1492168214.289 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:11:13.364Z,1492168273.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:11:14.160Z,1492168274.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:11:39.054Z,1492168299.055 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:11:39.055Z,1492168299.055 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:11:39.055Z,1492168299.055 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:11:39.055Z,1492168299.055 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:11:39.452Z,1492168299.452 [Default:CheckIn:D] Stopped
2017-04-14T11:11:39.452Z,1492168299.453 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:11:43.034Z,1492168303.033 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 465.568913 min 
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn:E] Stopped
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn] Stopped
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn](INFO): Running loop #67
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn] Running Loop=67
2017-04-14T11:11:43.034Z,1492168303.034 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:11:43.035Z,1492168303.035 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:11:43.480Z,1492168303.480 [NAL9602](INFO): Powering up
2017-04-14T11:11:54.281Z,1492168314.281 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:12:00.322Z,1492168320.322 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:12:00.322Z,1492168320.322 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:12:00.322Z,1492168320.322 [BPC1](ERROR): Communications Fault
2017-04-14T11:12:00.404Z,1492168320.404 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:12:01.554Z,1492168321.554 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:12:01.554Z,1492168321.554 [BPC1] No Fault, FailCount= 1
2017-04-14T11:12:22.520Z,1492168342.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:12:23.316Z,1492168343.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:12:35.888Z,1492168355.888 [NAL9602](INFO): SBD MO Status=2, MOMSN=2160, MT Status=2, MTMSN=0
2017-04-14T11:12:35.888Z,1492168355.888 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T11:12:37.296Z,1492168357.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:12:38.093Z,1492168358.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:12:43.232Z,1492168363.232 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:12:53.254Z,1492168373.254 [NAL9602](INFO): SBD MO Status=0, MOMSN=2160, MT Status=0, MTMSN=0
2017-04-14T11:12:53.254Z,1492168373.254 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:12:54.461Z,1492168374.461 [NAL9602](INFO): GPS fix at 20170414T111336: (36.802322, -121.787151)
2017-04-14T11:12:54.527Z,1492168374.527 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:12:54.527Z,1492168374.527 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:12:59.548Z,1492168379.548 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0272.lzma
2017-04-14T11:13:00.310Z,1492168380.310 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0272.lzma.bak
2017-04-14T11:13:00.310Z,1492168380.310 [DataOverHttps](INFO): SBD MOMSN=4885830
2017-04-14T11:13:04.742Z,1492168384.742 [NAL9602](INFO): Powering down
2017-04-14T11:13:10.156Z,1492168390.156 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0273.lzma
2017-04-14T11:13:12.484Z,1492168392.484 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0273.lzma.bak
2017-04-14T11:13:12.484Z,1492168392.484 [DataOverHttps](INFO): SBD MOMSN=4885833
2017-04-14T11:13:12.803Z,1492168392.803 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:13:12.804Z,1492168392.804 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:13:12.804Z,1492168392.804 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:13:16.648Z,1492168396.648 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:13:16.648Z,1492168396.648 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:13:16.648Z,1492168396.648 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:13:16.694Z,1492168396.694 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:13:16.830Z,1492168396.830 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:13:16.830Z,1492168396.830 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:13:17.197Z,1492168397.197 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:13:17.198Z,1492168397.198 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:13:17.198Z,1492168397.198 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:13:18.758Z,1492168398.758 [PNI_TCM](ERROR): CRC does not match. Expected:0x22848 got:0x23579
2017-04-14T11:13:35.547Z,1492168415.547 [PNI_TCM](ERROR): CRC does not match. Expected:0x10485 got:0x2073
2017-04-14T11:13:40.352Z,1492168420.352 [PNI_TCM](ERROR): CRC does not match. Expected:0x51025 got:0x28213
2017-04-14T11:13:46.419Z,1492168426.418 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:13:47.212Z,1492168427.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:15:11.001Z,1492168511.001 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:15:11.796Z,1492168511.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:15:24.972Z,1492168524.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:15:25.769Z,1492168525.769 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:15:31.181Z,1492168531.181 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:15:31.181Z,1492168531.181 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:15:31.181Z,1492168531.181 [BPC1](ERROR): Data Fault
2017-04-14T11:15:31.254Z,1492168531.254 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:15:32.459Z,1492168532.459 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:15:32.459Z,1492168532.459 [BPC1] No Fault, FailCount= 1
2017-04-14T11:16:08.524Z,1492168568.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:16:09.320Z,1492168569.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:16:17.980Z,1492168577.980 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:16:17.980Z,1492168577.980 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:16:17.981Z,1492168577.981 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:16:18.006Z,1492168578.006 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:16:18.223Z,1492168578.223 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:16:18.223Z,1492168578.223 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:16:18.522Z,1492168578.522 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:16:18.522Z,1492168578.522 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:16:18.523Z,1492168578.523 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:16:22.502Z,1492168582.502 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:16:23.320Z,1492168583.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:16:34.156Z,1492168594.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:16:34.952Z,1492168594.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:17:44.760Z,1492168664.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:17:45.556Z,1492168665.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:17:58.748Z,1492168678.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:17:59.544Z,1492168679.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:18:13.336Z,1492168693.336 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:18:13.336Z,1492168693.336 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:18:13.336Z,1492168693.336 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:18:13.336Z,1492168693.336 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:18:13.741Z,1492168693.741 [Default:CheckIn:D] Stopped
2017-04-14T11:18:13.741Z,1492168693.741 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:18:17.275Z,1492168697.275 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 472.140365 min 
2017-04-14T11:18:17.275Z,1492168697.275 [Default:CheckIn:E] Stopped
2017-04-14T11:18:17.275Z,1492168697.276 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn] Stopped
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn](INFO): Running loop #68
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn] Running Loop=68
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:18:17.276Z,1492168697.276 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:18:17.726Z,1492168697.726 [NAL9602](INFO): Powering up
2017-04-14T11:18:28.917Z,1492168708.917 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:18:42.292Z,1492168722.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:18:43.088Z,1492168723.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:18:43.815Z,1492168723.815 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:18:43.816Z,1492168723.816 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:18:43.816Z,1492168723.816 [BPC1](ERROR): Data Fault
2017-04-14T11:18:43.953Z,1492168723.953 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:18:45.138Z,1492168725.138 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:18:45.138Z,1492168725.138 [BPC1] No Fault, FailCount= 1
2017-04-14T11:18:55.342Z,1492168735.342 [NAL9602](INFO): SBD MO Status=0, MOMSN=2161, MT Status=0, MTMSN=0
2017-04-14T11:18:55.342Z,1492168735.342 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:18:56.572Z,1492168736.572 [NAL9602](INFO): GPS fix at 20170414T111939: (36.802335, -121.787109)
2017-04-14T11:18:56.692Z,1492168736.692 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:18:56.692Z,1492168736.692 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:19:03.228Z,1492168743.228 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0276.lzma
2017-04-14T11:19:04.002Z,1492168744.002 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0276.lzma.bak
2017-04-14T11:19:04.002Z,1492168744.002 [DataOverHttps](INFO): SBD MOMSN=4885838
2017-04-14T11:19:08.325Z,1492168748.325 [NAL9602](INFO): Powering down
2017-04-14T11:19:08.656Z,1492168748.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:19:09.452Z,1492168749.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:19:14.398Z,1492168754.398 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0277.lzma
2017-04-14T11:19:15.166Z,1492168755.166 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0277.lzma.bak
2017-04-14T11:19:15.166Z,1492168755.166 [DataOverHttps](INFO): SBD MOMSN=4885841
2017-04-14T11:19:15.650Z,1492168755.650 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:19:15.650Z,1492168755.650 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:19:15.650Z,1492168755.650 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:19:19.695Z,1492168759.695 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:19:19.695Z,1492168759.695 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:19:19.695Z,1492168759.695 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:19:19.712Z,1492168759.713 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:19:19.885Z,1492168759.885 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:19:19.886Z,1492168759.885 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:19:20.194Z,1492168760.194 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:19:20.195Z,1492168760.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:19:20.195Z,1492168760.195 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:19:22.656Z,1492168762.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:19:23.452Z,1492168763.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:20:32.450Z,1492168832.450 [BPC1](ERROR): Failed to parse message.
2017-04-14T11:20:32.450Z,1492168832.450 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:20:32.450Z,1492168832.450 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:20:32.450Z,1492168832.450 [BPC1](ERROR): Data Fault
2017-04-14T11:20:32.482Z,1492168832.482 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:20:32.576Z,1492168832.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:20:33.372Z,1492168833.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:20:33.828Z,1492168833.829 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:20:33.829Z,1492168833.829 [BPC1] No Fault, FailCount= 1
2017-04-14T11:21:32.579Z,1492168892.579 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T11:21:32.579Z,1492168892.579 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:21:32.579Z,1492168892.579 [BPC1](ERROR): Data Fault
2017-04-14T11:21:32.657Z,1492168892.657 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:21:33.855Z,1492168893.855 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:21:33.855Z,1492168893.855 [BPC1] No Fault, FailCount= 1
2017-04-14T11:21:49.785Z,1492168909.785 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:21:49.785Z,1492168909.785 [BPC1] Communications Fault, FailCount= 2
2017-04-14T11:21:49.785Z,1492168909.785 [BPC1](ERROR): Communications Fault
2017-04-14T11:21:49.816Z,1492168909.816 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:21:51.130Z,1492168911.130 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:21:51.130Z,1492168911.130 [BPC1] No Fault, FailCount= 2
2017-04-14T11:21:56.373Z,1492168916.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:21:57.168Z,1492168917.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:22:20.351Z,1492168940.351 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:22:20.352Z,1492168940.352 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:22:20.352Z,1492168940.352 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:22:20.378Z,1492168940.378 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:22:20.508Z,1492168940.508 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:22:20.508Z,1492168940.509 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:22:20.882Z,1492168940.882 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:22:20.882Z,1492168940.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:22:20.882Z,1492168940.882 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:22:43.285Z,1492168963.285 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:22:48.034Z,1492168968.034 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:22:48.034Z,1492168968.034 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:22:48.035Z,1492168968.035 [BPC1](ERROR): Data Fault
2017-04-14T11:22:48.066Z,1492168968.066 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:22:49.296Z,1492168969.296 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:22:49.297Z,1492168969.297 [BPC1] No Fault, FailCount= 1
2017-04-14T11:23:06.272Z,1492168986.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:23:07.068Z,1492168987.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:23:20.252Z,1492169000.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:23:21.050Z,1492169001.050 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:24:16.371Z,1492169056.371 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:24:16.371Z,1492169056.371 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:24:16.371Z,1492169056.371 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:24:16.371Z,1492169056.371 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:24:16.769Z,1492169056.769 [Default:CheckIn:D] Stopped
2017-04-14T11:24:16.769Z,1492169056.769 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:24:17.186Z,1492169057.186 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 478.190853 min 
2017-04-14T11:24:17.186Z,1492169057.186 [Default:CheckIn:E] Stopped
2017-04-14T11:24:17.186Z,1492169057.186 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:24:17.186Z,1492169057.186 [Default:CheckIn] Stopped
2017-04-14T11:24:17.186Z,1492169057.186 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:24:17.186Z,1492169057.187 [Default:CheckIn](INFO): Running loop #69
2017-04-14T11:24:17.187Z,1492169057.187 [Default:CheckIn] Running Loop=69
2017-04-14T11:24:17.187Z,1492169057.187 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:24:17.187Z,1492169057.187 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:24:20.666Z,1492169060.666 [NAL9602](INFO): Powering up
2017-04-14T11:24:30.137Z,1492169070.137 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:24:30.932Z,1492169070.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:24:31.853Z,1492169071.852 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:24:44.108Z,1492169084.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:24:44.905Z,1492169084.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:24:48.658Z,1492169088.658 [NAL9602](INFO): SBD MO Status=0, MOMSN=2162, MT Status=0, MTMSN=0
2017-04-14T11:24:48.658Z,1492169088.658 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:24:49.860Z,1492169089.860 [NAL9602](INFO): GPS fix at 20170414T112533: (36.802231, -121.787033)
2017-04-14T11:24:49.959Z,1492169089.959 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:24:49.959Z,1492169089.959 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:24:54.644Z,1492169094.644 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0280.lzma
2017-04-14T11:24:55.428Z,1492169095.428 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0280.lzma.bak
2017-04-14T11:24:55.428Z,1492169095.428 [DataOverHttps](INFO): SBD MOMSN=4885845
2017-04-14T11:24:59.802Z,1492169099.802 [NAL9602](INFO): Powering down
2017-04-14T11:25:05.200Z,1492169105.201 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0281.lzma
2017-04-14T11:25:06.654Z,1492169106.654 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0281.lzma.bak
2017-04-14T11:25:06.654Z,1492169106.654 [DataOverHttps](INFO): SBD MOMSN=4885848
2017-04-14T11:25:07.011Z,1492169107.011 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:25:07.022Z,1492169107.022 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:25:07.023Z,1492169107.023 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:25:21.045Z,1492169121.045 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:25:21.045Z,1492169121.045 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:25:21.045Z,1492169121.045 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:25:21.075Z,1492169121.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:25:21.477Z,1492169121.477 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:25:21.477Z,1492169121.477 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:25:21.858Z,1492169121.858 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:25:21.859Z,1492169121.859 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:25:21.868Z,1492169121.868 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:25:53.996Z,1492169153.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:25:54.792Z,1492169154.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:26:07.981Z,1492169167.981 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:26:08.776Z,1492169168.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:26:51.544Z,1492169211.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:26:51.950Z,1492169211.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:27:17.920Z,1492169237.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:27:18.716Z,1492169238.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:27:21.857Z,1492169241.857 [PNI_TCM](ERROR): CRC does not match. Expected:0x43643 got:0x33494
2017-04-14T11:28:01.350Z,1492169281.349 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:02.144Z,1492169282.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:15.368Z,1492169295.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:16.165Z,1492169296.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:22.161Z,1492169302.161 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:28:22.162Z,1492169302.162 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:28:22.162Z,1492169302.162 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:28:22.191Z,1492169302.191 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:28:22.615Z,1492169302.615 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:28:22.615Z,1492169302.615 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:28:22.970Z,1492169302.970 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:28:22.970Z,1492169302.970 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:28:22.970Z,1492169302.970 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:28:27.043Z,1492169307.043 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:27.840Z,1492169307.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:40.988Z,1492169320.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:41.784Z,1492169321.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:28:49.331Z,1492169329.331 [PNI_TCM](ERROR): CRC does not match. Expected:0x32087 got:0x39042
2017-04-14T11:28:52.545Z,1492169332.545 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:28:52.545Z,1492169332.545 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:28:52.545Z,1492169332.545 [BPC1](ERROR): Data Fault
2017-04-14T11:28:52.643Z,1492169332.643 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:28:53.779Z,1492169333.779 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:28:53.779Z,1492169333.779 [BPC1] No Fault, FailCount= 1
2017-04-14T11:29:16.504Z,1492169356.504 [PNI_TCM](ERROR): CRC does not match. Expected:0x9511 got:0x7361
2017-04-14T11:29:50.888Z,1492169390.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:29:51.684Z,1492169391.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:30:07.715Z,1492169407.716 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:30:07.716Z,1492169407.716 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:30:07.716Z,1492169407.716 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:30:07.716Z,1492169407.716 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:30:08.149Z,1492169408.149 [Default:CheckIn:D] Stopped
2017-04-14T11:30:08.149Z,1492169408.149 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:30:08.516Z,1492169408.516 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 484.047168 min 
2017-04-14T11:30:08.516Z,1492169408.516 [Default:CheckIn:E] Stopped
2017-04-14T11:30:08.516Z,1492169408.516 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:30:08.516Z,1492169408.516 [Default:CheckIn] Stopped
2017-04-14T11:30:08.517Z,1492169408.517 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:30:08.517Z,1492169408.517 [Default:CheckIn](INFO): Running loop #70
2017-04-14T11:30:08.517Z,1492169408.517 [Default:CheckIn] Running Loop=70
2017-04-14T11:30:08.517Z,1492169408.517 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:30:08.517Z,1492169408.517 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:30:12.339Z,1492169412.339 [NAL9602](INFO): Powering up
2017-04-14T11:30:23.154Z,1492169423.154 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:30:33.587Z,1492169433.587 [PNI_TCM](ERROR): CRC does not match. Expected:0x32232 got:0x62871
2017-04-14T11:30:35.934Z,1492169435.934 [NAL9602](INFO): SBD MO Status=0, MOMSN=2163, MT Status=0, MTMSN=0
2017-04-14T11:30:35.934Z,1492169435.934 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:30:46.355Z,1492169446.355 [NAL9602](INFO): GPS fix at 20170414T113130: (36.802302, -121.787131)
2017-04-14T11:30:46.451Z,1492169446.451 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:30:46.451Z,1492169446.451 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:30:51.315Z,1492169451.316 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20170414T032153/Courier0284.lzma
2017-04-14T11:30:52.110Z,1492169452.110 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0284.lzma.bak
2017-04-14T11:30:52.111Z,1492169452.111 [DataOverHttps](INFO): SBD MOMSN=4885852
2017-04-14T11:31:00.401Z,1492169460.401 [NAL9602](INFO): Powering down
2017-04-14T11:31:00.514Z,1492169460.514 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:31:00.514Z,1492169460.514 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:31:00.514Z,1492169460.514 [BPC1](ERROR): Communications Fault
2017-04-14T11:31:00.665Z,1492169460.665 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:31:00.832Z,1492169460.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:31:01.629Z,1492169461.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:31:01.741Z,1492169461.741 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:31:01.741Z,1492169461.741 [BPC1] No Fault, FailCount= 1
2017-04-14T11:31:06.425Z,1492169466.425 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0285.lzma
2017-04-14T11:31:07.178Z,1492169467.178 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0285.lzma.bak
2017-04-14T11:31:07.178Z,1492169467.178 [DataOverHttps](INFO): SBD MOMSN=4885855
2017-04-14T11:31:07.672Z,1492169467.672 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:31:07.672Z,1492169467.672 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:31:07.672Z,1492169467.672 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:31:15.500Z,1492169475.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:31:16.297Z,1492169476.297 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:31:23.251Z,1492169483.251 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:31:23.251Z,1492169483.251 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:31:23.251Z,1492169483.251 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:31:23.289Z,1492169483.289 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:31:23.687Z,1492169483.687 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:31:23.688Z,1492169483.688 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:31:24.050Z,1492169484.050 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:31:24.051Z,1492169484.051 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:31:24.051Z,1492169484.051 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:31:32.029Z,1492169492.029 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:31:32.030Z,1492169492.030 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:31:32.030Z,1492169492.030 [BPC1](ERROR): Communications Fault
2017-04-14T11:31:32.114Z,1492169492.114 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:31:33.266Z,1492169493.266 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:31:33.266Z,1492169493.266 [BPC1] No Fault, FailCount= 1
2017-04-14T11:31:58.988Z,1492169518.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:31:59.784Z,1492169519.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:32:24.648Z,1492169544.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:32:25.444Z,1492169545.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:32:40.986Z,1492169560.986 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-04-14T11:32:43.432Z,1492169563.432 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:33:34.488Z,1492169614.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:33:35.284Z,1492169615.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:33:49.261Z,1492169629.261 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:33:50.056Z,1492169630.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:34:24.449Z,1492169664.450 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:34:24.450Z,1492169664.450 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:34:24.450Z,1492169664.450 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:34:24.484Z,1492169664.484 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:34:24.879Z,1492169664.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:34:24.879Z,1492169664.879 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:34:25.281Z,1492169665.281 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:34:25.281Z,1492169665.281 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:34:25.282Z,1492169665.282 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:34:58.452Z,1492169698.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:34:59.248Z,1492169699.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:35:07.609Z,1492169707.609 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T11:35:07.609Z,1492169707.609 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:35:07.609Z,1492169707.609 [BPC1](ERROR): Data Fault
2017-04-14T11:35:07.678Z,1492169707.678 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:35:08.859Z,1492169708.859 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:35:08.859Z,1492169708.859 [BPC1] No Fault, FailCount= 1
2017-04-14T11:35:12.368Z,1492169712.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:35:13.164Z,1492169713.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:35:52.823Z,1492169752.823 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:35:52.823Z,1492169752.823 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:35:52.824Z,1492169752.824 [BPC1](ERROR): Data Fault
2017-04-14T11:35:52.900Z,1492169752.900 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:35:54.071Z,1492169754.071 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:35:54.071Z,1492169754.071 [BPC1] No Fault, FailCount= 1
2017-04-14T11:36:08.083Z,1492169768.083 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:36:08.083Z,1492169768.083 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:36:08.083Z,1492169768.083 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:36:08.083Z,1492169768.083 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:36:08.453Z,1492169768.453 [Default:CheckIn:D] Stopped
2017-04-14T11:36:08.453Z,1492169768.453 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:36:08.896Z,1492169768.896 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 490.052246 min 
2017-04-14T11:36:08.896Z,1492169768.896 [Default:CheckIn:E] Stopped
2017-04-14T11:36:08.896Z,1492169768.896 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:36:08.896Z,1492169768.897 [Default:CheckIn] Stopped
2017-04-14T11:36:08.897Z,1492169768.897 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:36:08.897Z,1492169768.897 [Default:CheckIn](INFO): Running loop #71
2017-04-14T11:36:08.897Z,1492169768.897 [Default:CheckIn] Running Loop=71
2017-04-14T11:36:08.897Z,1492169768.897 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:36:08.897Z,1492169768.897 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:36:12.461Z,1492169772.461 [NAL9602](INFO): Powering up
2017-04-14T11:36:23.024Z,1492169783.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:36:23.625Z,1492169783.625 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:36:23.820Z,1492169783.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:36:45.230Z,1492169805.230 [NAL9602](INFO): SBD MO Status=0, MOMSN=2164, MT Status=0, MTMSN=0
2017-04-14T11:36:45.230Z,1492169805.230 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:37:16.440Z,1492169836.440 [NAL9602](INFO): GPS fix at 20170414T113801: (36.802267, -121.787034)
2017-04-14T11:37:16.526Z,1492169836.526 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:37:16.526Z,1492169836.526 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:37:20.496Z,1492169840.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:37:21.243Z,1492169841.243 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0288.lzma
2017-04-14T11:37:21.292Z,1492169841.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:37:22.069Z,1492169842.069 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0288.lzma.bak
2017-04-14T11:37:22.069Z,1492169842.069 [DataOverHttps](INFO): SBD MOMSN=4885863
2017-04-14T11:37:27.018Z,1492169847.018 [NAL9602](INFO): Powering down
2017-04-14T11:37:27.203Z,1492169847.203 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:37:27.203Z,1492169847.203 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:37:27.203Z,1492169847.203 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:37:27.234Z,1492169847.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:37:27.418Z,1492169847.418 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:37:27.418Z,1492169847.418 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:37:27.766Z,1492169847.766 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:37:27.767Z,1492169847.767 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:37:27.771Z,1492169847.772 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:37:32.568Z,1492169852.568 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0289.lzma
2017-04-14T11:37:32.953Z,1492169852.953 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:37:33.347Z,1492169853.347 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0289.lzma.bak
2017-04-14T11:37:33.347Z,1492169853.347 [DataOverHttps](INFO): SBD MOMSN=4885866
2017-04-14T11:37:33.748Z,1492169853.749 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:37:33.854Z,1492169853.854 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:37:33.854Z,1492169853.854 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:37:33.854Z,1492169853.854 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:37:46.402Z,1492169866.402 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:37:47.024Z,1492169867.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:38:30.396Z,1492169910.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:38:30.629Z,1492169910.629 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:38:30.629Z,1492169910.629 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:38:30.629Z,1492169910.629 [BPC1](ERROR): Communications Fault
2017-04-14T11:38:30.673Z,1492169910.673 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:38:31.192Z,1492169911.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:38:31.879Z,1492169911.879 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:38:31.879Z,1492169911.879 [BPC1] No Fault, FailCount= 1
2017-04-14T11:38:56.820Z,1492169936.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:38:57.616Z,1492169937.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:39:10.816Z,1492169950.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:39:11.613Z,1492169951.614 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:40:06.680Z,1492170006.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:40:07.476Z,1492170007.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:40:20.662Z,1492170020.662 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:40:21.456Z,1492170021.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:40:28.034Z,1492170028.034 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:40:28.034Z,1492170028.034 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:40:28.034Z,1492170028.034 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:40:28.076Z,1492170028.076 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:40:28.462Z,1492170028.462 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:40:28.462Z,1492170028.462 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:40:28.837Z,1492170028.837 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:40:28.837Z,1492170028.837 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:40:28.838Z,1492170028.838 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:41:04.146Z,1492170064.146 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:41:04.940Z,1492170064.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:41:23.226Z,1492170083.226 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:41:23.227Z,1492170083.227 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:41:23.227Z,1492170083.227 [BPC1](ERROR): Communications Fault
2017-04-14T11:41:23.326Z,1492170083.326 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:41:24.399Z,1492170084.399 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:41:24.399Z,1492170084.399 [BPC1] No Fault, FailCount= 1
2017-04-14T11:41:30.558Z,1492170090.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:41:31.352Z,1492170091.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:41:40.556Z,1492170100.556 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:41:40.556Z,1492170100.556 [BPC1] Communications Fault, FailCount= 2
2017-04-14T11:41:40.556Z,1492170100.556 [BPC1](ERROR): Communications Fault
2017-04-14T11:41:40.585Z,1492170100.585 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:41:41.796Z,1492170101.796 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:41:41.796Z,1492170101.796 [BPC1] No Fault, FailCount= 2
2017-04-14T11:41:43.804Z,1492170103.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:41:44.600Z,1492170104.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:42:34.585Z,1492170154.585 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:42:34.585Z,1492170154.585 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:42:34.585Z,1492170154.585 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:42:34.585Z,1492170154.585 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:42:35.018Z,1492170155.018 [Default:CheckIn:D] Stopped
2017-04-14T11:42:35.018Z,1492170155.018 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 496.494987 min 
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn:E] Stopped
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn] Stopped
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:42:38.834Z,1492170158.834 [Default:CheckIn](INFO): Running loop #72
2017-04-14T11:42:38.835Z,1492170158.835 [Default:CheckIn] Running Loop=72
2017-04-14T11:42:38.835Z,1492170158.835 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:42:38.835Z,1492170158.835 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:42:39.301Z,1492170159.301 [NAL9602](INFO): Powering up
2017-04-14T11:42:43.781Z,1492170163.781 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:42:50.506Z,1492170170.506 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:42:54.413Z,1492170174.413 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:42:55.208Z,1492170175.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:43:28.958Z,1492170208.958 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:43:28.958Z,1492170208.958 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T11:43:28.958Z,1492170208.958 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:43:29.037Z,1492170209.037 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:43:29.391Z,1492170209.391 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:43:29.391Z,1492170209.391 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T11:43:29.743Z,1492170209.743 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:43:29.744Z,1492170209.744 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:43:29.744Z,1492170209.744 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:44:03.576Z,1492170243.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:44:03.870Z,1492170243.870 [NAL9602](INFO): SBD MO Status=0, MOMSN=2165, MT Status=0, MTMSN=0
2017-04-14T11:44:03.870Z,1492170243.870 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:44:04.372Z,1492170244.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:44:04.722Z,1492170244.722 [PNI_TCM](ERROR): CRC does not match. Expected:0x53939 got:0x23625
2017-04-14T11:44:05.072Z,1492170245.072 [NAL9602](INFO): GPS fix at 20170414T114450: (36.802325, -121.787178)
2017-04-14T11:44:05.147Z,1492170245.148 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:44:05.148Z,1492170245.148 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:44:10.036Z,1492170250.036 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0292.lzma
2017-04-14T11:44:10.786Z,1492170250.786 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0292.lzma.bak
2017-04-14T11:44:10.786Z,1492170250.786 [DataOverHttps](INFO): SBD MOMSN=4885880
2017-04-14T11:44:15.094Z,1492170255.094 [NAL9602](INFO): Powering down
2017-04-14T11:44:18.276Z,1492170258.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:44:19.072Z,1492170259.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:44:20.360Z,1492170260.360 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0293.lzma
2017-04-14T11:44:21.166Z,1492170261.166 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0293.lzma.bak
2017-04-14T11:44:21.166Z,1492170261.166 [DataOverHttps](INFO): SBD MOMSN=4885883
2017-04-14T11:44:21.657Z,1492170261.657 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:44:21.657Z,1492170261.657 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:44:21.657Z,1492170261.657 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:45:27.464Z,1492170327.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:45:28.260Z,1492170328.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:45:41.420Z,1492170341.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:45:42.216Z,1492170342.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:46:25.704Z,1492170385.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:46:26.108Z,1492170386.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:46:29.882Z,1492170389.882 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:46:29.882Z,1492170389.882 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:46:29.883Z,1492170389.883 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:46:29.904Z,1492170389.904 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:46:30.291Z,1492170390.291 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:46:30.291Z,1492170390.291 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:46:30.680Z,1492170390.680 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:46:30.681Z,1492170390.681 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:46:30.681Z,1492170390.681 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:46:40.666Z,1492170400.666 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:46:40.666Z,1492170400.666 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:46:40.666Z,1492170400.666 [BPC1](ERROR): Data Fault
2017-04-14T11:46:40.784Z,1492170400.784 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:46:41.898Z,1492170401.898 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:46:41.898Z,1492170401.898 [BPC1] No Fault, FailCount= 1
2017-04-14T11:46:52.056Z,1492170412.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:46:52.854Z,1492170412.854 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:47:49.500Z,1492170469.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:47:50.296Z,1492170470.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:48:01.924Z,1492170481.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:48:02.720Z,1492170482.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:48:11.996Z,1492170491.996 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:48:11.996Z,1492170491.996 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:48:11.996Z,1492170491.996 [BPC1](ERROR): Communications Fault
2017-04-14T11:48:12.067Z,1492170492.067 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:48:13.243Z,1492170493.243 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:48:13.243Z,1492170493.243 [BPC1] No Fault, FailCount= 1
2017-04-14T11:48:15.908Z,1492170495.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:48:16.704Z,1492170496.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:49:22.298Z,1492170562.297 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:49:22.298Z,1492170562.298 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:49:22.298Z,1492170562.298 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:49:22.298Z,1492170562.298 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:49:22.701Z,1492170562.701 [Default:CheckIn:D] Stopped
2017-04-14T11:49:22.701Z,1492170562.701 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:49:23.100Z,1492170563.100 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 503.289714 min 
2017-04-14T11:49:23.100Z,1492170563.100 [Default:CheckIn:E] Stopped
2017-04-14T11:49:23.100Z,1492170563.100 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:49:23.100Z,1492170563.100 [Default:CheckIn] Stopped
2017-04-14T11:49:23.100Z,1492170563.100 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:49:23.101Z,1492170563.101 [Default:CheckIn](INFO): Running loop #73
2017-04-14T11:49:23.101Z,1492170563.101 [Default:CheckIn] Running Loop=73
2017-04-14T11:49:23.101Z,1492170563.101 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:49:23.101Z,1492170563.101 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:49:25.036Z,1492170565.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:49:25.832Z,1492170565.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:49:26.584Z,1492170566.584 [NAL9602](INFO): Powering up
2017-04-14T11:49:31.001Z,1492170571.001 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:49:31.001Z,1492170571.001 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:49:31.001Z,1492170571.001 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:49:31.032Z,1492170571.032 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:49:31.466Z,1492170571.466 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:49:31.466Z,1492170571.466 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:49:31.841Z,1492170571.841 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:49:31.841Z,1492170571.841 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:49:31.841Z,1492170571.842 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:49:37.337Z,1492170577.337 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:49:42.572Z,1492170582.572 [BPC1](ERROR): Failed to parse message.
2017-04-14T11:49:42.572Z,1492170582.572 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:49:42.572Z,1492170582.572 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:49:42.572Z,1492170582.572 [BPC1](ERROR): Data Fault
2017-04-14T11:49:42.651Z,1492170582.651 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:49:43.818Z,1492170583.818 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:49:43.818Z,1492170583.819 [BPC1] No Fault, FailCount= 1
2017-04-14T11:49:56.952Z,1492170596.952 [NAL9602](INFO): SBD MO Status=0, MOMSN=2166, MT Status=0, MTMSN=0
2017-04-14T11:49:56.952Z,1492170596.953 [NAL9602](INFO): No messages in MT queue
2017-04-14T11:50:01.334Z,1492170601.334 [NAL9602](INFO): GPS fix at 20170414T115047: (36.802399, -121.787088)
2017-04-14T11:50:01.418Z,1492170601.418 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T11:50:01.419Z,1492170601.418 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T11:50:06.143Z,1492170606.143 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0296.lzma
2017-04-14T11:50:06.902Z,1492170606.902 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0296.lzma.bak
2017-04-14T11:50:06.903Z,1492170606.903 [DataOverHttps](INFO): SBD MOMSN=4885888
2017-04-14T11:50:11.240Z,1492170611.240 [NAL9602](INFO): Powering down
2017-04-14T11:50:16.605Z,1492170616.605 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0297.lzma
2017-04-14T11:50:17.390Z,1492170617.390 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0297.lzma.bak
2017-04-14T11:50:17.390Z,1492170617.390 [DataOverHttps](INFO): SBD MOMSN=4885891
2017-04-14T11:50:17.881Z,1492170617.881 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T11:50:17.881Z,1492170617.881 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T11:50:17.881Z,1492170617.881 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T11:50:35.004Z,1492170635.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:50:35.800Z,1492170635.800 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:50:46.729Z,1492170646.728 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:50:46.729Z,1492170646.729 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:50:46.729Z,1492170646.729 [BPC1](ERROR): Communications Fault
2017-04-14T11:50:46.816Z,1492170646.816 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:50:47.989Z,1492170647.989 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:50:47.989Z,1492170647.989 [BPC1] No Fault, FailCount= 1
2017-04-14T11:50:49.729Z,1492170649.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:50:50.524Z,1492170650.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:51:33.214Z,1492170693.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:51:34.008Z,1492170694.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:51:56.722Z,1492170716.722 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:51:56.722Z,1492170716.722 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:51:56.722Z,1492170716.722 [BPC1](ERROR): Data Fault
2017-04-14T11:51:56.777Z,1492170716.777 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:51:57.944Z,1492170717.944 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:51:57.945Z,1492170717.945 [BPC1] No Fault, FailCount= 1
2017-04-14T11:51:59.600Z,1492170719.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:52:00.396Z,1492170720.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:52:32.101Z,1492170752.101 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:52:32.101Z,1492170752.101 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T11:52:32.101Z,1492170752.101 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:52:32.145Z,1492170752.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:52:32.544Z,1492170752.544 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:52:32.544Z,1492170752.544 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T11:52:32.925Z,1492170752.925 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:52:32.926Z,1492170752.926 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:52:32.926Z,1492170752.926 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:52:38.878Z,1492170758.878 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T11:52:38.878Z,1492170758.878 [BPC1] Data Fault, FailCount= 1
2017-04-14T11:52:38.878Z,1492170758.878 [BPC1](ERROR): Data Fault
2017-04-14T11:52:38.963Z,1492170758.963 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T11:52:40.153Z,1492170760.152 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:52:40.153Z,1492170760.153 [BPC1] No Fault, FailCount= 1
2017-04-14T11:52:43.052Z,1492170763.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:52:43.848Z,1492170763.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:52:44.123Z,1492170764.123 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T11:53:08.720Z,1492170788.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:53:09.516Z,1492170789.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:53:22.684Z,1492170802.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:53:23.480Z,1492170803.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:06.948Z,1492170846.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:07.745Z,1492170847.745 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:32.608Z,1492170872.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:33.404Z,1492170873.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:46.584Z,1492170886.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:54:47.380Z,1492170887.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:55:18.594Z,1492170918.594 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T11:55:18.594Z,1492170918.594 [Default:CheckIn:C.Wait] Stopped
2017-04-14T11:55:18.594Z,1492170918.594 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T11:55:18.594Z,1492170918.594 [Default:CheckIn:D] Running Loop=1
2017-04-14T11:55:19.001Z,1492170919.001 [Default:CheckIn:D] Stopped
2017-04-14T11:55:19.001Z,1492170919.001 [Default:CheckIn:E] Running Loop=1
2017-04-14T11:55:19.413Z,1492170919.413 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 509.228027 min 
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn:E] Stopped
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn] Stopped
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn](INFO): Running loop #74
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn] Running Loop=74
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T11:55:19.414Z,1492170919.414 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T11:55:23.606Z,1492170923.606 [NAL9602](INFO): Powering up
2017-04-14T11:55:33.253Z,1492170933.253 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:55:33.253Z,1492170933.253 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T11:55:33.253Z,1492170933.253 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:55:33.292Z,1492170933.292 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:55:33.676Z,1492170933.676 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:55:33.676Z,1492170933.676 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T11:55:34.080Z,1492170934.080 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:55:34.080Z,1492170934.080 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:55:34.081Z,1492170934.081 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:55:34.789Z,1492170934.789 [NAL9602](INFO): NAL9602 initialized
2017-04-14T11:55:36.438Z,1492170936.438 [PNI_TCM](ERROR): CRC does not match. Expected:0x2506 got:0x55917
2017-04-14T11:55:44.768Z,1492170944.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:55:45.564Z,1492170945.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:55:56.464Z,1492170956.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:55:57.260Z,1492170957.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:56:26.098Z,1492170986.098 [NAL9602](INFO): SBD MO Status=2, MOMSN=2167, MT Status=2, MTMSN=0
2017-04-14T11:56:26.098Z,1492170986.098 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T11:56:40.722Z,1492171000.722 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:56:41.533Z,1492171001.533 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:57:06.644Z,1492171026.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:57:07.048Z,1492171027.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:57:21.104Z,1492171041.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:57:21.900Z,1492171041.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:57:54.524Z,1492171074.524 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:57:54.524Z,1492171074.524 [BPC1] Communications Fault, FailCount= 1
2017-04-14T11:57:54.525Z,1492171074.524 [BPC1](ERROR): Communications Fault
2017-04-14T11:57:54.637Z,1492171074.637 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:57:56.010Z,1492171076.010 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:57:56.011Z,1492171076.011 [BPC1] No Fault, FailCount= 1
2017-04-14T11:58:04.544Z,1492171084.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:05.340Z,1492171085.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:15.126Z,1492171095.126 [BPC1](ERROR): Failed to receive battery data
2017-04-14T11:58:15.126Z,1492171095.126 [BPC1] Communications Fault, FailCount= 2
2017-04-14T11:58:15.126Z,1492171095.126 [BPC1](ERROR): Communications Fault
2017-04-14T11:58:15.381Z,1492171095.381 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T11:58:16.384Z,1492171096.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:16.947Z,1492171096.947 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T11:58:16.947Z,1492171096.947 [BPC1] No Fault, FailCount= 2
2017-04-14T11:58:17.180Z,1492171097.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:30.272Z,1492171110.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:31.081Z,1492171111.081 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:58:34.310Z,1492171114.310 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T11:58:34.310Z,1492171114.310 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T11:58:34.310Z,1492171114.310 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T11:58:34.368Z,1492171114.368 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T11:58:34.658Z,1492171114.658 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T11:58:34.658Z,1492171114.658 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T11:58:35.067Z,1492171115.067 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T11:58:35.068Z,1492171115.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T11:58:35.068Z,1492171115.068 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T11:59:14.444Z,1492171154.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:59:15.240Z,1492171155.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:59:40.860Z,1492171180.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:59:41.656Z,1492171181.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:59:51.850Z,1492171191.850 [NAL9602](INFO): SBD MO Status=2, MOMSN=2167, MT Status=2, MTMSN=0
2017-04-14T11:59:51.850Z,1492171191.850 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T11:59:54.852Z,1492171194.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T11:59:55.648Z,1492171195.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:00:19.586Z,1492171219.586 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-04-14T11:55:19.4Z
2017-04-14T12:00:19.586Z,1492171219.586 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:00:19.586Z,1492171219.586 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:00:23.925Z,1492171223.925 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0300.lzma
2017-04-14T12:00:24.642Z,1492171224.642 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0300.lzma.bak
2017-04-14T12:00:24.642Z,1492171224.642 [DataOverHttps](INFO): SBD MOMSN=4885927
2017-04-14T12:00:30.069Z,1492171230.069 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:00:30.069Z,1492171230.069 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:00:30.069Z,1492171230.069 [BPC1](ERROR): Communications Fault
2017-04-14T12:00:30.124Z,1492171230.124 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:00:31.043Z,1492171231.043 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:00:31.043Z,1492171231.043 [BPC1] No Fault, FailCount= 1
2017-04-14T12:00:36.860Z,1492171236.860 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0301.lzma
2017-04-14T12:00:37.602Z,1492171237.602 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0301.lzma.bak
2017-04-14T12:00:37.603Z,1492171237.603 [DataOverHttps](INFO): SBD MOMSN=4885929
2017-04-14T12:00:38.091Z,1492171238.091 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:00:38.091Z,1492171238.091 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:00:38.091Z,1492171238.091 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:00:38.308Z,1492171238.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:00:39.104Z,1492171239.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:00:52.082Z,1492171252.082 [NAL9602](INFO): SBD MO Status=2, MOMSN=2167, MT Status=2, MTMSN=0
2017-04-14T12:00:52.082Z,1492171252.082 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T12:00:52.505Z,1492171252.505 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-04-14T12:00:58.080Z,1492171258.080 [NAL9602](INFO): Powering down
2017-04-14T12:01:04.716Z,1492171264.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:01:05.512Z,1492171265.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:01:35.354Z,1492171295.354 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:01:35.354Z,1492171295.354 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2017-04-14T12:01:35.354Z,1492171295.354 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:01:35.386Z,1492171295.386 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:01:35.840Z,1492171295.840 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:01:35.840Z,1492171295.840 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2017-04-14T12:01:36.148Z,1492171296.148 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:01:36.149Z,1492171296.149 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:01:36.149Z,1492171296.149 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:02:13.826Z,1492171333.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:02:14.620Z,1492171334.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:02:27.812Z,1492171347.812 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:02:28.608Z,1492171348.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:02:44.308Z,1492171364.308 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:03:37.680Z,1492171417.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:03:38.476Z,1492171418.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:03:52.452Z,1492171432.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:03:53.248Z,1492171433.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:04:36.453Z,1492171476.453 [PNI_TCM](ERROR): CRC does not match. Expected:0x22083 got:0x49445
2017-04-14T12:04:36.504Z,1492171476.504 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:04:36.504Z,1492171476.504 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2017-04-14T12:04:36.504Z,1492171476.504 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:04:36.568Z,1492171476.568 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:04:36.928Z,1492171476.928 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:04:36.929Z,1492171476.929 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2017-04-14T12:04:37.270Z,1492171477.270 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:04:37.287Z,1492171477.287 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:04:37.288Z,1492171477.288 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:04:48.372Z,1492171488.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:04:49.169Z,1492171489.169 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:05:02.356Z,1492171502.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:05:03.152Z,1492171503.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:05:38.528Z,1492171538.528 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:05:38.528Z,1492171538.528 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:05:38.528Z,1492171538.528 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:05:38.528Z,1492171538.528 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:05:39.013Z,1492171539.013 [Default:CheckIn:D] Stopped
2017-04-14T12:05:39.013Z,1492171539.013 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:05:39.342Z,1492171539.342 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 519.561589 min 
2017-04-14T12:05:39.342Z,1492171539.342 [Default:CheckIn:E] Stopped
2017-04-14T12:05:39.343Z,1492171539.342 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:05:39.343Z,1492171539.343 [Default:CheckIn] Stopped
2017-04-14T12:05:39.343Z,1492171539.343 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:05:39.343Z,1492171539.343 [Default:CheckIn](INFO): Running loop #75
2017-04-14T12:05:39.343Z,1492171539.343 [Default:CheckIn] Running Loop=75
2017-04-14T12:05:39.344Z,1492171539.344 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:05:39.344Z,1492171539.344 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:05:43.180Z,1492171543.180 [NAL9602](INFO): Powering up
2017-04-14T12:05:54.361Z,1492171554.361 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:05:55.161Z,1492171555.161 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-04-14T12:05:55.161Z,1492171555.161 [NAL9602] Data Fault, FailCount= 1
2017-04-14T12:05:55.161Z,1492171555.161 [NAL9602](ERROR): Data Fault
2017-04-14T12:05:55.256Z,1492171555.256 [CBIT](ERROR): Data Fault in component: NAL9602
2017-04-14T12:05:55.561Z,1492171555.560 [NAL9602](INFO): Powering down
2017-04-14T12:05:56.446Z,1492171556.446 [CBIT](INFO): Clearing failed state for component NAL9602
2017-04-14T12:05:56.446Z,1492171556.446 [NAL9602] No Fault, FailCount= 1
2017-04-14T12:06:00.769Z,1492171560.769 [NAL9602](INFO): Powering up NAL9602
2017-04-14T12:06:11.965Z,1492171571.965 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:06:12.249Z,1492171572.249 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:06:13.044Z,1492171573.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:06:26.240Z,1492171586.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:06:27.036Z,1492171587.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:06:34.762Z,1492171594.762 [NAL9602](INFO): SBD MO Status=0, MOMSN=2167, MT Status=0, MTMSN=0
2017-04-14T12:06:34.762Z,1492171594.762 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:06:35.985Z,1492171595.985 [NAL9602](INFO): GPS fix at 20170414T120723: (36.802380, -121.787142)
2017-04-14T12:06:36.050Z,1492171596.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 1025.7, recording fix residuals...
2017-04-14T12:06:36.116Z,1492171596.116 [UniversalFixResidualReporter](INFO): Fix residual: 99.6 %DT, over the last 1025.7 m. Residual distance 1021.8 m at bearing -156.5 degrees. Fix at (36.8024, -121.7871) with 5.3 m made good.
2017-04-14T12:06:36.117Z,1492171596.117 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:06:36.117Z,1492171596.117 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:06:41.421Z,1492171601.421 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0304.lzma
2017-04-14T12:06:42.198Z,1492171602.198 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0304.lzma.bak
2017-04-14T12:06:42.199Z,1492171602.198 [DataOverHttps](INFO): SBD MOMSN=4885946
2017-04-14T12:06:46.433Z,1492171606.434 [NAL9602](INFO): Powering down
2017-04-14T12:06:47.401Z,1492171607.401 [PNI_TCM](ERROR): CRC does not match. Expected:0x28913 got:0x6336
2017-04-14T12:06:51.816Z,1492171611.816 [DataOverHttps](INFO): Sending 230 bytes from file Logs/20170414T032153/Express0305.lzma
2017-04-14T12:06:52.610Z,1492171612.610 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0305.lzma.bak
2017-04-14T12:06:52.610Z,1492171612.610 [DataOverHttps](INFO): SBD MOMSN=4885949
2017-04-14T12:06:53.113Z,1492171613.113 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:06:53.113Z,1492171613.113 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:06:53.113Z,1492171613.113 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:07:09.754Z,1492171629.754 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:07:10.596Z,1492171630.596 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:07:35.388Z,1492171655.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:07:36.184Z,1492171656.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:07:37.351Z,1492171657.351 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:07:37.351Z,1492171657.351 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:07:37.352Z,1492171657.352 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:07:37.402Z,1492171657.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:07:37.761Z,1492171657.761 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:07:37.761Z,1492171657.761 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:07:38.146Z,1492171658.146 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:07:38.147Z,1492171658.147 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:07:38.152Z,1492171658.151 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:07:51.333Z,1492171671.333 [PNI_TCM](ERROR): CRC does not match. Expected:0x1589 got:0x6336
2017-04-14T12:08:19.624Z,1492171699.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:08:20.424Z,1492171700.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:08:46.024Z,1492171726.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:08:46.820Z,1492171726.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:08:59.996Z,1492171739.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:09:00.792Z,1492171740.792 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:09:55.924Z,1492171795.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:09:56.720Z,1492171796.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:10:09.920Z,1492171809.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:10:10.716Z,1492171810.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:10:38.202Z,1492171838.202 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:10:38.202Z,1492171838.202 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:10:38.202Z,1492171838.202 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:10:38.247Z,1492171838.247 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:10:38.619Z,1492171838.619 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:10:38.619Z,1492171838.619 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:10:39.102Z,1492171839.102 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:10:39.102Z,1492171839.102 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:10:39.103Z,1492171839.103 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:10:53.406Z,1492171853.406 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:10:54.200Z,1492171854.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:11:19.780Z,1492171879.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:11:20.576Z,1492171880.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:11:33.744Z,1492171893.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:11:34.540Z,1492171894.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:11:53.852Z,1492171913.852 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:11:53.853Z,1492171913.852 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:11:53.853Z,1492171913.853 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:11:53.853Z,1492171913.853 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:11:54.246Z,1492171914.246 [Default:CheckIn:D] Stopped
2017-04-14T12:11:54.246Z,1492171914.246 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 525.815462 min 
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn:E] Stopped
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn] Stopped
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:11:57.706Z,1492171917.706 [Default:CheckIn](INFO): Running loop #76
2017-04-14T12:11:57.706Z,1492171917.707 [Default:CheckIn] Running Loop=76
2017-04-14T12:11:57.707Z,1492171917.707 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:11:57.707Z,1492171917.707 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:11:58.152Z,1492171918.152 [NAL9602](INFO): Powering up
2017-04-14T12:12:08.961Z,1492171928.961 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:12:24.583Z,1492171944.583 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:12:24.583Z,1492171944.583 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:12:24.583Z,1492171944.583 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:12:24.583Z,1492171944.583 [BPC1](ERROR): Data Fault
2017-04-14T12:12:24.659Z,1492171944.659 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:12:25.859Z,1492171945.859 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:12:25.859Z,1492171945.859 [BPC1] No Fault, FailCount= 1
2017-04-14T12:12:43.676Z,1492171963.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:12:44.472Z,1492171964.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:12:44.654Z,1492171964.654 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:13:09.998Z,1492171989.998 [PNI_TCM](ERROR): CRC does not match. Expected:0x28182 got:0x27711
2017-04-14T12:13:11.199Z,1492171991.199 [PNI_TCM](ERROR): CRC does not match. Expected:0x3734 got:0x46308
2017-04-14T12:13:13.966Z,1492171993.966 [NAL9602](INFO): SBD MO Status=2, MOMSN=2168, MT Status=2, MTMSN=0
2017-04-14T12:13:13.966Z,1492171993.966 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T12:13:14.013Z,1492171994.013 [PNI_TCM](ERROR): CRC does not match. Expected:0x6847 got:0x49445
2017-04-14T12:13:33.574Z,1492172013.574 [NAL9602](INFO): SBD MO Status=0, MOMSN=2168, MT Status=0, MTMSN=0
2017-04-14T12:13:33.574Z,1492172013.574 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:13:34.778Z,1492172014.778 [NAL9602](INFO): GPS fix at 20170414T121423: (36.802329, -121.787122)
2017-04-14T12:13:34.855Z,1492172014.855 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:13:34.855Z,1492172014.855 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:13:39.496Z,1492172019.496 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:13:39.496Z,1492172019.496 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:13:39.496Z,1492172019.496 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:13:39.553Z,1492172019.553 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:13:39.581Z,1492172019.581 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0308.lzma
2017-04-14T12:13:39.669Z,1492172019.669 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:13:39.669Z,1492172019.670 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:13:40.118Z,1492172020.118 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:13:40.123Z,1492172020.123 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:13:40.123Z,1492172020.124 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:13:40.392Z,1492172020.392 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0308.lzma.bak
2017-04-14T12:13:40.393Z,1492172020.393 [DataOverHttps](INFO): SBD MOMSN=4885955
2017-04-14T12:13:44.751Z,1492172024.751 [NAL9602](INFO): Powering down
2017-04-14T12:13:50.071Z,1492172030.071 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0309.lzma
2017-04-14T12:13:50.850Z,1492172030.850 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0309.lzma.bak
2017-04-14T12:13:50.850Z,1492172030.850 [DataOverHttps](INFO): SBD MOMSN=4885958
2017-04-14T12:13:51.457Z,1492172031.457 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:13:51.457Z,1492172031.457 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:13:51.458Z,1492172031.457 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:13:52.784Z,1492172032.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:13:53.580Z,1492172033.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:14:39.541Z,1492172079.541 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:14:39.541Z,1492172079.541 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:14:39.541Z,1492172079.541 [BPC1](ERROR): Data Fault
2017-04-14T12:14:39.626Z,1492172079.626 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:14:40.894Z,1492172080.894 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:14:40.894Z,1492172080.894 [BPC1] No Fault, FailCount= 1
2017-04-14T12:14:50.980Z,1492172090.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:14:51.776Z,1492172091.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:15:05.008Z,1492172105.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:15:05.804Z,1492172105.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:15:17.444Z,1492172117.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:15:18.240Z,1492172118.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:15:23.331Z,1492172123.331 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:15:23.331Z,1492172123.331 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:15:23.331Z,1492172123.331 [BPC1](ERROR): Data Fault
2017-04-14T12:15:23.363Z,1492172123.362 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:15:24.559Z,1492172124.559 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:15:24.559Z,1492172124.559 [BPC1] No Fault, FailCount= 1
2017-04-14T12:16:27.324Z,1492172187.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:16:28.120Z,1492172188.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:16:40.194Z,1492172200.194 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:16:40.195Z,1492172200.195 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:16:40.195Z,1492172200.195 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:16:40.250Z,1492172200.250 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:16:40.568Z,1492172200.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:16:40.578Z,1492172200.578 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:16:40.578Z,1492172200.578 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:16:40.973Z,1492172200.973 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:16:40.974Z,1492172200.974 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:16:40.974Z,1492172200.974 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:16:41.364Z,1492172201.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:09.784Z,1492172229.784 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:17:09.784Z,1492172229.784 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:17:09.785Z,1492172229.784 [BPC1](ERROR): Data Fault
2017-04-14T12:17:09.877Z,1492172229.877 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:17:11.008Z,1492172231.008 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:17:11.008Z,1492172231.008 [BPC1] No Fault, FailCount= 1
2017-04-14T12:17:24.762Z,1492172244.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:25.556Z,1492172245.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:37.220Z,1492172257.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:38.016Z,1492172258.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:51.152Z,1492172271.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:17:51.948Z,1492172271.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:18:47.880Z,1492172327.880 [PNI_TCM](ERROR): CRC does not match. Expected:0x535 got:0x49445
2017-04-14T12:18:49.487Z,1492172329.487 [PNI_TCM](ERROR): CRC does not match. Expected:0x61629 got:0x25697
2017-04-14T12:18:51.922Z,1492172331.922 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:18:51.922Z,1492172331.922 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:18:51.922Z,1492172331.922 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:18:51.922Z,1492172331.922 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:18:52.304Z,1492172332.304 [Default:CheckIn:D] Stopped
2017-04-14T12:18:52.304Z,1492172332.304 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:18:52.726Z,1492172332.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 532.783073 min 
2017-04-14T12:18:52.727Z,1492172332.727 [Default:CheckIn:E] Stopped
2017-04-14T12:18:52.731Z,1492172332.731 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:18:52.731Z,1492172332.731 [Default:CheckIn] Stopped
2017-04-14T12:18:52.731Z,1492172332.731 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:18:52.732Z,1492172332.732 [Default:CheckIn](INFO): Running loop #77
2017-04-14T12:18:52.732Z,1492172332.732 [Default:CheckIn] Running Loop=77
2017-04-14T12:18:52.732Z,1492172332.732 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:18:52.732Z,1492172332.732 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:18:56.381Z,1492172336.381 [NAL9602](INFO): Powering up
2017-04-14T12:19:01.052Z,1492172341.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:19:01.849Z,1492172341.849 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:19:07.513Z,1492172347.513 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:19:15.036Z,1492172355.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:19:15.832Z,1492172355.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:19:41.188Z,1492172381.188 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:19:41.188Z,1492172381.188 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T12:19:41.188Z,1492172381.188 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:19:41.210Z,1492172381.210 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:19:41.625Z,1492172381.625 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:19:41.626Z,1492172381.625 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T12:19:41.998Z,1492172381.998 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:19:41.998Z,1492172381.998 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:19:41.998Z,1492172381.998 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:19:58.560Z,1492172398.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:19:59.356Z,1492172399.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:20:12.504Z,1492172412.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:20:13.300Z,1492172413.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:20:24.200Z,1492172424.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:20:24.996Z,1492172424.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:20:27.277Z,1492172427.277 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:20:27.277Z,1492172427.277 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:20:27.277Z,1492172427.277 [BPC1](ERROR): Communications Fault
2017-04-14T12:20:27.371Z,1492172427.371 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:20:28.535Z,1492172428.534 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:20:28.535Z,1492172428.535 [BPC1] No Fault, FailCount= 1
2017-04-14T12:21:07.410Z,1492172467.410 [NAL9602](INFO): SBD MO Status=2, MOMSN=2169, MT Status=2, MTMSN=0
2017-04-14T12:21:07.410Z,1492172467.410 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T12:21:08.420Z,1492172468.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:21:09.216Z,1492172469.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:21:21.410Z,1492172481.410 [NAL9602](INFO): SBD MO Status=0, MOMSN=2169, MT Status=0, MTMSN=0
2017-04-14T12:21:21.410Z,1492172481.410 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:21:22.618Z,1492172482.618 [NAL9602](INFO): GPS fix at 20170414T122211: (36.802357, -121.787123)
2017-04-14T12:21:22.685Z,1492172482.685 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:21:22.685Z,1492172482.685 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:21:27.771Z,1492172487.772 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0312.lzma
2017-04-14T12:21:28.562Z,1492172488.562 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0312.lzma.bak
2017-04-14T12:21:28.562Z,1492172488.562 [DataOverHttps](INFO): SBD MOMSN=4885962
2017-04-14T12:21:32.961Z,1492172492.961 [NAL9602](INFO): Powering down
2017-04-14T12:21:34.064Z,1492172494.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:21:34.860Z,1492172494.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:21:38.354Z,1492172498.354 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0313.lzma
2017-04-14T12:21:39.134Z,1492172499.134 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0313.lzma.bak
2017-04-14T12:21:39.134Z,1492172499.135 [DataOverHttps](INFO): SBD MOMSN=4885965
2017-04-14T12:21:39.654Z,1492172499.654 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:21:39.654Z,1492172499.654 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:21:39.654Z,1492172499.654 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:21:48.815Z,1492172508.815 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:21:49.613Z,1492172509.613 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:22:43.624Z,1492172563.624 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:22:43.624Z,1492172563.624 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:22:43.624Z,1492172563.624 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:22:43.650Z,1492172563.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:22:43.787Z,1492172563.787 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:22:43.787Z,1492172563.787 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:22:44.147Z,1492172564.147 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:22:44.147Z,1492172564.147 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:22:44.148Z,1492172564.148 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:22:44.961Z,1492172564.961 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:22:58.682Z,1492172578.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:22:59.476Z,1492172579.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:24:07.760Z,1492172647.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:24:08.558Z,1492172648.558 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:24:11.413Z,1492172651.413 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:24:11.413Z,1492172651.413 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:24:11.413Z,1492172651.413 [BPC1](ERROR): Data Fault
2017-04-14T12:24:11.511Z,1492172651.511 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:24:12.746Z,1492172652.746 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:24:12.747Z,1492172652.747 [BPC1] No Fault, FailCount= 1
2017-04-14T12:25:08.490Z,1492172708.490 [PNI_TCM](ERROR): CRC does not match. Expected:0x45056 got:0x9887
2017-04-14T12:25:31.680Z,1492172731.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:25:32.478Z,1492172732.478 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:25:44.523Z,1492172744.523 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:25:44.523Z,1492172744.523 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:25:44.523Z,1492172744.523 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:25:44.561Z,1492172744.561 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:25:44.925Z,1492172744.925 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:25:44.925Z,1492172744.925 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:25:45.354Z,1492172745.354 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:25:45.355Z,1492172745.355 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:25:45.355Z,1492172745.355 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:26:40.130Z,1492172800.130 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:26:40.130Z,1492172800.130 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:26:40.130Z,1492172800.130 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:26:40.130Z,1492172800.130 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:26:40.513Z,1492172800.513 [Default:CheckIn:D] Stopped
2017-04-14T12:26:40.513Z,1492172800.513 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 540.586556 min 
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn:E] Stopped
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn] Stopped
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:26:40.910Z,1492172800.910 [Default:CheckIn](INFO): Running loop #78
2017-04-14T12:26:40.910Z,1492172800.911 [Default:CheckIn] Running Loop=78
2017-04-14T12:26:40.911Z,1492172800.911 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:26:40.912Z,1492172800.912 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:26:41.548Z,1492172801.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:26:42.344Z,1492172802.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:26:44.545Z,1492172804.545 [NAL9602](INFO): Powering up
2017-04-14T12:26:55.701Z,1492172815.701 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:26:56.300Z,1492172816.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:26:57.096Z,1492172817.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:27:01.742Z,1492172821.742 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:27:01.742Z,1492172821.742 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:27:01.742Z,1492172821.742 [BPC1](ERROR): Communications Fault
2017-04-14T12:27:01.801Z,1492172821.801 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:27:03.069Z,1492172823.069 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:27:03.069Z,1492172823.069 [BPC1] No Fault, FailCount= 1
2017-04-14T12:27:13.302Z,1492172833.302 [NAL9602](INFO): SBD MO Status=2, MOMSN=2170, MT Status=2, MTMSN=0
2017-04-14T12:27:13.302Z,1492172833.302 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T12:27:52.247Z,1492172872.247 [NAL9602](INFO): SBD MO Status=2, MOMSN=2170, MT Status=2, MTMSN=0
2017-04-14T12:27:52.247Z,1492172872.247 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T12:28:05.087Z,1492172885.087 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:28:05.087Z,1492172885.087 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:28:05.087Z,1492172885.087 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:28:05.087Z,1492172885.087 [BPC1](ERROR): Data Fault
2017-04-14T12:28:05.146Z,1492172885.146 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:28:05.388Z,1492172885.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:28:06.185Z,1492172886.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:28:06.340Z,1492172886.340 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:28:06.340Z,1492172886.340 [BPC1] No Fault, FailCount= 1
2017-04-14T12:28:45.475Z,1492172925.475 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:28:45.475Z,1492172925.475 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T12:28:45.475Z,1492172925.476 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:28:45.515Z,1492172925.515 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:28:45.896Z,1492172925.896 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:28:45.896Z,1492172925.896 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T12:28:46.257Z,1492172926.257 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:28:46.257Z,1492172926.257 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:28:46.257Z,1492172926.257 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:29:01.034Z,1492172941.034 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:29:01.035Z,1492172941.035 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:29:01.035Z,1492172941.035 [BPC1](ERROR): Data Fault
2017-04-14T12:29:01.097Z,1492172941.098 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:29:02.270Z,1492172942.270 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:29:02.270Z,1492172942.270 [BPC1] No Fault, FailCount= 1
2017-04-14T12:29:13.831Z,1492172953.831 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:29:13.832Z,1492172953.832 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:29:13.832Z,1492172953.832 [BPC1] Data Fault, FailCount= 2
2017-04-14T12:29:13.832Z,1492172953.832 [BPC1](ERROR): Data Fault
2017-04-14T12:29:13.899Z,1492172953.899 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:29:15.062Z,1492172955.062 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:29:15.062Z,1492172955.062 [BPC1] No Fault, FailCount= 2
2017-04-14T12:29:16.084Z,1492172956.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:29:16.884Z,1492172956.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:29:30.056Z,1492172970.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:29:30.858Z,1492172970.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:29:47.534Z,1492172987.534 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:29:47.534Z,1492172987.534 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:29:47.534Z,1492172987.534 [BPC1](ERROR): Communications Fault
2017-04-14T12:29:47.609Z,1492172987.609 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:29:48.590Z,1492172988.590 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:29:48.590Z,1492172988.590 [BPC1] No Fault, FailCount= 1
2017-04-14T12:29:58.459Z,1492172998.459 [NAL9602](INFO): SBD MO Status=0, MOMSN=2170, MT Status=0, MTMSN=0
2017-04-14T12:29:58.460Z,1492172998.460 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:29:59.649Z,1492172999.649 [NAL9602](INFO): GPS fix at 20170414T123049: (36.802372, -121.787120)
2017-04-14T12:29:59.704Z,1492172999.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 533.184, recording fix residuals...
2017-04-14T12:29:59.727Z,1492172999.727 [UniversalFixResidualReporter](INFO): Fix residual: 100.3 %DT, over the last 533.2 m. Residual distance 534.9 m at bearing -156.5 degrees. Fix at (36.8024, -121.7871) with 1.7 m made good.
2017-04-14T12:29:59.728Z,1492172999.728 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:29:59.728Z,1492172999.728 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:30:05.077Z,1492173005.077 [DataOverHttps](INFO): Sending 89 bytes from file Logs/20170414T032153/Courier0316.lzma
2017-04-14T12:30:05.883Z,1492173005.883 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0316.lzma.bak
2017-04-14T12:30:05.883Z,1492173005.883 [DataOverHttps](INFO): SBD MOMSN=4885969
2017-04-14T12:30:10.818Z,1492173010.818 [NAL9602](INFO): Powering down
2017-04-14T12:30:16.757Z,1492173016.757 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0317.lzma
2017-04-14T12:30:17.586Z,1492173017.586 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0317.lzma.bak
2017-04-14T12:30:17.587Z,1492173017.587 [DataOverHttps](INFO): SBD MOMSN=4885972
2017-04-14T12:30:18.083Z,1492173018.083 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:30:18.083Z,1492173018.083 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:30:18.083Z,1492173018.083 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:30:39.960Z,1492173039.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:30:40.762Z,1492173040.761 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:30:53.936Z,1492173053.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:30:54.735Z,1492173054.735 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:31:46.437Z,1492173106.437 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:31:46.437Z,1492173106.437 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:31:46.437Z,1492173106.437 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:31:46.461Z,1492173106.461 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:31:46.879Z,1492173106.879 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:31:46.879Z,1492173106.879 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:31:47.209Z,1492173107.209 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:31:47.210Z,1492173107.210 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:31:47.210Z,1492173107.210 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:32:03.822Z,1492173123.822 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:32:04.617Z,1492173124.617 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:32:40.531Z,1492173160.532 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:32:40.532Z,1492173160.532 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:32:40.532Z,1492173160.532 [BPC1](ERROR): Communications Fault
2017-04-14T12:32:40.609Z,1492173160.609 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:32:41.686Z,1492173161.686 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:32:41.687Z,1492173161.687 [BPC1] No Fault, FailCount= 1
2017-04-14T12:32:45.308Z,1492173165.307 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:33:13.737Z,1492173193.737 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:33:14.532Z,1492173194.532 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:33:27.688Z,1492173207.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:33:28.484Z,1492173208.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:34:23.640Z,1492173263.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:34:24.436Z,1492173264.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:34:39.136Z,1492173279.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:34:39.932Z,1492173279.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:34:47.260Z,1492173287.260 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:34:47.260Z,1492173287.260 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:34:47.260Z,1492173287.260 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:34:47.294Z,1492173287.294 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:34:47.662Z,1492173287.662 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:34:47.662Z,1492173287.662 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:34:48.029Z,1492173288.029 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:34:48.030Z,1492173288.030 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:34:48.030Z,1492173288.030 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:35:18.844Z,1492173318.844 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:35:18.844Z,1492173318.844 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:35:18.844Z,1492173318.844 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:35:18.845Z,1492173318.845 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:35:19.296Z,1492173319.296 [Default:CheckIn:D] Stopped
2017-04-14T12:35:19.296Z,1492173319.296 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:35:23.434Z,1492173323.434 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 549.232943 min 
2017-04-14T12:35:23.435Z,1492173323.435 [Default:CheckIn:E] Stopped
2017-04-14T12:35:23.435Z,1492173323.435 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:35:23.439Z,1492173323.439 [Default:CheckIn] Stopped
2017-04-14T12:35:23.439Z,1492173323.439 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:35:23.440Z,1492173323.440 [Default:CheckIn](INFO): Running loop #79
2017-04-14T12:35:23.440Z,1492173323.440 [Default:CheckIn] Running Loop=79
2017-04-14T12:35:23.440Z,1492173323.440 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:35:23.440Z,1492173323.440 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:35:23.892Z,1492173323.892 [NAL9602](INFO): Powering up
2017-04-14T12:35:25.127Z,1492173325.127 [PNI_TCM](ERROR): CRC does not match. Expected:0x13506 got:0x49280
2017-04-14T12:35:35.109Z,1492173335.109 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:35:47.472Z,1492173347.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:35:48.268Z,1492173348.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:35:52.701Z,1492173352.701 [NAL9602](INFO): SBD MO Status=0, MOMSN=2171, MT Status=0, MTMSN=0
2017-04-14T12:35:52.702Z,1492173352.702 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:35:57.132Z,1492173357.132 [NAL9602](INFO): GPS fix at 20170414T123647: (36.802351, -121.787128)
2017-04-14T12:35:57.321Z,1492173357.321 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:35:57.321Z,1492173357.321 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:36:01.456Z,1492173361.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:36:02.253Z,1492173362.253 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:36:03.320Z,1492173363.320 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0320.lzma
2017-04-14T12:36:04.106Z,1492173364.106 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0320.lzma.bak
2017-04-14T12:36:04.106Z,1492173364.106 [DataOverHttps](INFO): SBD MOMSN=4885979
2017-04-14T12:36:08.875Z,1492173368.875 [NAL9602](INFO): Powering down
2017-04-14T12:36:14.624Z,1492173374.624 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0321.lzma
2017-04-14T12:36:15.378Z,1492173375.378 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0321.lzma.bak
2017-04-14T12:36:15.379Z,1492173375.378 [DataOverHttps](INFO): SBD MOMSN=4885982
2017-04-14T12:36:15.892Z,1492173375.892 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:36:15.892Z,1492173375.892 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:36:15.892Z,1492173375.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:36:29.043Z,1492173389.043 [PNI_TCM](ERROR): CRC does not match. Expected:0x20135 got:0x28163
2017-04-14T12:36:40.236Z,1492173400.236 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:36:40.236Z,1492173400.236 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:36:40.236Z,1492173400.236 [BPC1](ERROR): Communications Fault
2017-04-14T12:36:40.308Z,1492173400.308 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:36:41.522Z,1492173401.522 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:36:41.522Z,1492173401.522 [BPC1] No Fault, FailCount= 1
2017-04-14T12:36:57.368Z,1492173417.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:36:58.165Z,1492173418.165 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:37:10.554Z,1492173430.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:37:11.356Z,1492173431.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:37:48.255Z,1492173468.255 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:37:48.259Z,1492173468.259 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:37:48.259Z,1492173468.259 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:37:48.290Z,1492173468.290 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:37:48.628Z,1492173468.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:37:48.628Z,1492173468.628 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:37:49.030Z,1492173469.030 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:37:49.031Z,1492173469.031 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:37:49.031Z,1492173469.031 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:38:20.454Z,1492173500.454 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:38:21.260Z,1492173501.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:39:02.030Z,1492173542.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x5611 got:0x33819
2017-04-14T12:39:03.607Z,1492173543.607 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:39:03.607Z,1492173543.607 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:39:03.607Z,1492173543.607 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:39:03.611Z,1492173543.611 [BPC1](ERROR): Data Fault
2017-04-14T12:39:03.717Z,1492173543.717 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:39:04.852Z,1492173544.852 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:39:04.853Z,1492173544.853 [BPC1] No Fault, FailCount= 1
2017-04-14T12:39:31.116Z,1492173571.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:39:31.912Z,1492173571.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:39:45.090Z,1492173585.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:39:45.884Z,1492173585.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:39:52.940Z,1492173592.940 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:39:52.940Z,1492173592.940 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:39:52.940Z,1492173592.940 [BPC1](ERROR): Communications Fault
2017-04-14T12:39:53.008Z,1492173593.008 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:39:54.218Z,1492173594.218 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:39:54.218Z,1492173594.218 [BPC1] No Fault, FailCount= 1
2017-04-14T12:40:49.096Z,1492173649.096 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:40:49.096Z,1492173649.096 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:40:49.096Z,1492173649.096 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:40:49.150Z,1492173649.150 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:40:49.535Z,1492173649.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:40:49.535Z,1492173649.535 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:40:49.898Z,1492173649.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:40:49.899Z,1492173649.899 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:40:49.900Z,1492173649.900 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:40:54.210Z,1492173654.210 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:40:55.004Z,1492173655.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:41:16.300Z,1492173676.300 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:41:16.300Z,1492173676.300 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:41:16.300Z,1492173676.300 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:41:16.300Z,1492173676.300 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:41:16.707Z,1492173676.707 [Default:CheckIn:D] Stopped
2017-04-14T12:41:16.708Z,1492173676.708 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:41:17.098Z,1492173677.098 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 555.189844 min 
2017-04-14T12:41:17.098Z,1492173677.098 [Default:CheckIn:E] Stopped
2017-04-14T12:41:17.098Z,1492173677.098 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:41:17.098Z,1492173677.098 [Default:CheckIn] Stopped
2017-04-14T12:41:17.099Z,1492173677.099 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:41:17.099Z,1492173677.099 [Default:CheckIn](INFO): Running loop #80
2017-04-14T12:41:17.099Z,1492173677.099 [Default:CheckIn] Running Loop=80
2017-04-14T12:41:17.099Z,1492173677.099 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:41:17.099Z,1492173677.099 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:41:21.048Z,1492173681.048 [NAL9602](INFO): Powering up
2017-04-14T12:41:31.937Z,1492173691.937 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:41:39.977Z,1492173699.977 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:41:39.978Z,1492173699.977 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:41:39.978Z,1492173699.978 [BPC1](ERROR): Data Fault
2017-04-14T12:41:40.140Z,1492173700.140 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:41:41.208Z,1492173701.208 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:41:41.208Z,1492173701.208 [BPC1] No Fault, FailCount= 1
2017-04-14T12:42:04.904Z,1492173724.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:05.700Z,1492173725.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:09.938Z,1492173729.938 [NAL9602](INFO): SBD MO Status=0, MOMSN=2172, MT Status=0, MTMSN=0
2017-04-14T12:42:09.938Z,1492173729.938 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:42:11.148Z,1492173731.148 [NAL9602](INFO): GPS fix at 20170414T124301: (36.802365, -121.787136)
2017-04-14T12:42:11.230Z,1492173731.230 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:42:11.230Z,1492173731.230 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:42:16.060Z,1492173736.060 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0324.lzma
2017-04-14T12:42:16.846Z,1492173736.846 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0324.lzma.bak
2017-04-14T12:42:16.847Z,1492173736.847 [DataOverHttps](INFO): SBD MOMSN=4885987
2017-04-14T12:42:18.878Z,1492173738.878 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:19.672Z,1492173739.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:21.895Z,1492173741.895 [NAL9602](INFO): Powering down
2017-04-14T12:42:27.291Z,1492173747.291 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0325.lzma
2017-04-14T12:42:28.082Z,1492173748.082 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0325.lzma.bak
2017-04-14T12:42:28.083Z,1492173748.082 [DataOverHttps](INFO): SBD MOMSN=4885990
2017-04-14T12:42:28.657Z,1492173748.657 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:42:28.657Z,1492173748.657 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:42:28.657Z,1492173748.657 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:42:37.196Z,1492173757.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:37.968Z,1492173757.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:42:45.470Z,1492173765.470 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:43:27.965Z,1492173807.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:43:28.762Z,1492173808.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:43:36.782Z,1492173816.782 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:43:36.782Z,1492173816.782 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:43:36.782Z,1492173816.782 [BPC1](ERROR): Data Fault
2017-04-14T12:43:36.813Z,1492173816.813 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:43:38.019Z,1492173818.019 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:43:38.019Z,1492173818.019 [BPC1] No Fault, FailCount= 1
2017-04-14T12:43:43.173Z,1492173823.173 [PNI_TCM](ERROR): CRC does not match. Expected:0x48854 got:0x6977
2017-04-14T12:43:47.076Z,1492173827.076 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:43:47.796Z,1492173827.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:43:50.006Z,1492173830.006 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:43:50.006Z,1492173830.006 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:43:50.006Z,1492173830.006 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:43:50.026Z,1492173830.026 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:43:50.417Z,1492173830.417 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:43:50.417Z,1492173830.417 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:43:50.818Z,1492173830.818 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:43:50.818Z,1492173830.818 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:43:50.818Z,1492173830.819 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:44:19.604Z,1492173859.604 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:44:19.604Z,1492173859.604 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:44:19.604Z,1492173859.604 [BPC1](ERROR): Data Fault
2017-04-14T12:44:19.696Z,1492173859.696 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:44:20.807Z,1492173860.806 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:44:20.807Z,1492173860.807 [BPC1] No Fault, FailCount= 1
2017-04-14T12:44:37.852Z,1492173877.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:44:38.650Z,1492173878.650 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:44:52.642Z,1492173892.642 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:44:53.436Z,1492173893.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:46:02.520Z,1492173962.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:46:03.316Z,1492173963.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:46:45.396Z,1492174005.396 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:46:45.396Z,1492174005.396 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:46:45.396Z,1492174005.396 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:46:45.396Z,1492174005.396 [BPC1](ERROR): Data Fault
2017-04-14T12:46:45.477Z,1492174005.477 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:46:46.609Z,1492174006.609 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:46:46.609Z,1492174006.609 [BPC1] No Fault, FailCount= 1
2017-04-14T12:46:50.985Z,1492174010.985 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:46:50.985Z,1492174010.986 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:46:50.986Z,1492174010.986 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:46:50.000Z,1492174011.000 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:46:51.442Z,1492174011.442 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:46:51.443Z,1492174011.443 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:46:51.809Z,1492174011.809 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:46:51.810Z,1492174011.810 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:46:51.810Z,1492174011.810 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:47:12.412Z,1492174032.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:47:13.209Z,1492174033.209 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:47:25.616Z,1492174045.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:47:26.414Z,1492174046.414 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:47:29.020Z,1492174049.020 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:47:29.020Z,1492174049.020 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:47:29.020Z,1492174049.020 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:47:29.020Z,1492174049.020 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:47:29.425Z,1492174049.425 [Default:CheckIn:D] Stopped
2017-04-14T12:47:29.425Z,1492174049.425 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:47:29.797Z,1492174049.797 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 561.401758 min 
2017-04-14T12:47:29.797Z,1492174049.797 [Default:CheckIn:E] Stopped
2017-04-14T12:47:29.798Z,1492174049.797 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn] Stopped
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn](INFO): Running loop #81
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn] Running Loop=81
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:47:29.798Z,1492174049.798 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:47:33.481Z,1492174053.481 [NAL9602](INFO): Powering up
2017-04-14T12:47:44.313Z,1492174064.313 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:47:45.123Z,1492174065.124 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:47:45.124Z,1492174065.124 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:47:45.124Z,1492174065.124 [BPC1](ERROR): Data Fault
2017-04-14T12:47:45.213Z,1492174065.213 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:47:46.349Z,1492174066.349 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:47:46.349Z,1492174066.349 [BPC1] No Fault, FailCount= 1
2017-04-14T12:48:13.058Z,1492174093.058 [NAL9602](INFO): SBD MO Status=0, MOMSN=2173, MT Status=0, MTMSN=0
2017-04-14T12:48:13.058Z,1492174093.058 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:48:14.269Z,1492174094.269 [NAL9602](INFO): GPS fix at 20170414T124905: (36.802388, -121.787130)
2017-04-14T12:48:14.340Z,1492174094.340 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:48:14.340Z,1492174094.341 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:48:19.510Z,1492174099.510 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0328.lzma
2017-04-14T12:48:20.290Z,1492174100.290 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0328.lzma.bak
2017-04-14T12:48:20.291Z,1492174100.291 [DataOverHttps](INFO): SBD MOMSN=4886008
2017-04-14T12:48:21.517Z,1492174101.517 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:48:22.312Z,1492174102.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:48:24.645Z,1492174104.645 [NAL9602](INFO): Powering down
2017-04-14T12:48:31.685Z,1492174111.685 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0329.lzma
2017-04-14T12:48:32.478Z,1492174112.478 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0329.lzma.bak
2017-04-14T12:48:32.479Z,1492174112.479 [DataOverHttps](INFO): SBD MOMSN=4886011
2017-04-14T12:48:33.076Z,1492174113.076 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:48:33.076Z,1492174113.076 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:48:33.076Z,1492174113.076 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:48:36.304Z,1492174116.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:48:37.101Z,1492174117.101 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:49:17.838Z,1492174157.838 [PNI_TCM](ERROR): CRC does not match. Expected:0x7088 got:0x49445
2017-04-14T12:49:26.637Z,1492174166.637 [PNI_TCM](ERROR): CRC does not match. Expected:0x52317 got:0x6336
2017-04-14T12:49:45.424Z,1492174185.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:49:46.220Z,1492174186.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:49:52.147Z,1492174192.147 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:49:52.147Z,1492174192.148 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:49:52.147Z,1492174192.148 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:49:52.173Z,1492174192.173 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:49:52.586Z,1492174192.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:49:52.586Z,1492174192.586 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:49:52.953Z,1492174192.953 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:49:52.953Z,1492174192.953 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:49:52.953Z,1492174192.953 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:50:00.177Z,1492174200.177 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:50:00.972Z,1492174200.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:50:17.338Z,1492174217.338 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:50:17.338Z,1492174217.338 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:50:17.338Z,1492174217.338 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:50:17.338Z,1492174217.338 [BPC1](ERROR): Data Fault
2017-04-14T12:50:17.428Z,1492174217.428 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:50:18.540Z,1492174218.540 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:50:18.540Z,1492174218.540 [BPC1] No Fault, FailCount= 1
2017-04-14T12:51:10.048Z,1492174270.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:51:10.844Z,1492174270.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:52:19.149Z,1492174339.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:52:19.944Z,1492174339.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:52:22.363Z,1492174342.363 [PNI_TCM](ERROR): CRC does not match. Expected:0x28455 got:0x49152
2017-04-14T12:52:45.749Z,1492174365.749 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T12:52:53.310Z,1492174373.310 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:52:53.310Z,1492174373.310 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T12:52:53.311Z,1492174373.311 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:52:53.349Z,1492174373.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:52:53.766Z,1492174373.766 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:52:53.766Z,1492174373.766 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T12:52:54.146Z,1492174374.146 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:52:54.147Z,1492174374.147 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:52:54.147Z,1492174374.147 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:53:19.691Z,1492174399.691 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:53:19.691Z,1492174399.691 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:53:19.691Z,1492174399.691 [BPC1](ERROR): Data Fault
2017-04-14T12:53:19.742Z,1492174399.742 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:53:20.924Z,1492174400.924 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:53:20.924Z,1492174400.924 [BPC1] No Fault, FailCount= 1
2017-04-14T12:53:29.834Z,1492174409.834 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:53:30.628Z,1492174410.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:53:33.772Z,1492174413.773 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T12:53:33.773Z,1492174413.773 [Default:CheckIn:C.Wait] Stopped
2017-04-14T12:53:33.773Z,1492174413.773 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T12:53:33.773Z,1492174413.773 [Default:CheckIn:D] Running Loop=1
2017-04-14T12:53:34.158Z,1492174414.158 [Default:CheckIn:D] Stopped
2017-04-14T12:53:34.159Z,1492174414.158 [Default:CheckIn:E] Running Loop=1
2017-04-14T12:53:37.594Z,1492174417.594 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 567.480664 min 
2017-04-14T12:53:37.594Z,1492174417.594 [Default:CheckIn:E] Stopped
2017-04-14T12:53:37.594Z,1492174417.594 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn] Stopped
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn](INFO): Running loop #82
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn] Running Loop=82
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T12:53:37.595Z,1492174417.595 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T12:53:38.078Z,1492174418.078 [NAL9602](INFO): Powering up
2017-04-14T12:53:43.808Z,1492174423.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:53:44.609Z,1492174424.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:53:49.270Z,1492174429.270 [NAL9602](INFO): NAL9602 initialized
2017-04-14T12:54:53.684Z,1492174493.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:54:54.480Z,1492174494.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:55:19.872Z,1492174519.872 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T12:55:19.872Z,1492174519.872 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:55:19.872Z,1492174519.872 [BPC1](ERROR): Data Fault
2017-04-14T12:55:19.931Z,1492174519.931 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:55:21.102Z,1492174521.102 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:55:21.102Z,1492174521.102 [BPC1] No Fault, FailCount= 1
2017-04-14T12:55:54.394Z,1492174554.394 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:55:54.394Z,1492174554.394 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T12:55:54.394Z,1492174554.394 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:55:54.427Z,1492174554.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:55:54.811Z,1492174554.810 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:55:54.811Z,1492174554.811 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T12:55:55.161Z,1492174555.161 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:55:55.161Z,1492174555.161 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:55:55.162Z,1492174555.161 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:56:02.844Z,1492174562.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:56:03.640Z,1492174563.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:56:09.272Z,1492174569.272 [BPC1](ERROR): Failed to receive battery data
2017-04-14T12:56:09.272Z,1492174569.272 [BPC1] Communications Fault, FailCount= 1
2017-04-14T12:56:09.272Z,1492174569.272 [BPC1](ERROR): Communications Fault
2017-04-14T12:56:09.528Z,1492174569.528 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T12:56:10.671Z,1492174570.671 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:56:10.671Z,1492174570.671 [BPC1] No Fault, FailCount= 1
2017-04-14T12:56:12.512Z,1492174572.512 [NAL9602](INFO): SBD MO Status=0, MOMSN=2174, MT Status=0, MTMSN=0
2017-04-14T12:56:12.512Z,1492174572.512 [NAL9602](INFO): No messages in MT queue
2017-04-14T12:56:13.705Z,1492174573.704 [NAL9602](INFO): GPS fix at 20170414T125705: (36.802319, -121.787126)
2017-04-14T12:56:13.789Z,1492174573.789 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T12:56:13.789Z,1492174573.789 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T12:56:17.582Z,1492174577.582 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:56:18.376Z,1492174578.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:56:18.987Z,1492174578.987 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0332.lzma
2017-04-14T12:56:19.759Z,1492174579.759 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0332.lzma.bak
2017-04-14T12:56:19.759Z,1492174579.759 [DataOverHttps](INFO): SBD MOMSN=4886015
2017-04-14T12:56:24.882Z,1492174584.882 [NAL9602](INFO): Powering down
2017-04-14T12:56:30.644Z,1492174590.644 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0333.lzma
2017-04-14T12:56:31.391Z,1492174591.391 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0333.lzma.bak
2017-04-14T12:56:31.398Z,1492174591.398 [DataOverHttps](INFO): SBD MOMSN=4886018
2017-04-14T12:56:31.884Z,1492174591.884 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T12:56:31.884Z,1492174591.884 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T12:56:31.884Z,1492174591.884 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T12:57:27.464Z,1492174647.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:57:28.262Z,1492174648.262 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:57:45.777Z,1492174665.777 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:57:46.508Z,1492174666.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:58:03.024Z,1492174683.024 [PNI_TCM](ERROR): CRC does not match. Expected:0x37403 got:0x26578
2017-04-14T12:58:07.039Z,1492174687.039 [BPC1](ERROR): Failed to parse message.
2017-04-14T12:58:07.039Z,1492174687.039 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T12:58:07.039Z,1492174687.039 [BPC1] Data Fault, FailCount= 1
2017-04-14T12:58:07.039Z,1492174687.039 [BPC1](ERROR): Data Fault
2017-04-14T12:58:07.161Z,1492174687.161 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T12:58:08.327Z,1492174688.327 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T12:58:08.331Z,1492174688.331 [BPC1] No Fault, FailCount= 1
2017-04-14T12:58:09.030Z,1492174689.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x53472 got:0x49446
2017-04-14T12:58:12.238Z,1492174692.238 [PNI_TCM](ERROR): CRC does not match. Expected:0x15472 got:0x6977
2017-04-14T12:58:36.562Z,1492174716.562 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:58:37.356Z,1492174717.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:58:55.450Z,1492174735.450 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T12:58:55.450Z,1492174735.450 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T12:58:55.450Z,1492174735.450 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T12:58:55.476Z,1492174735.476 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T12:58:55.660Z,1492174735.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:58:55.857Z,1492174735.857 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T12:58:55.857Z,1492174735.857 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T12:58:56.247Z,1492174736.247 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T12:58:56.247Z,1492174736.247 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T12:58:56.248Z,1492174736.248 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T12:58:56.400Z,1492174736.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:59:47.260Z,1492174787.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T12:59:48.057Z,1492174788.057 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:00:00.460Z,1492174800.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:00:01.256Z,1492174801.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:01:10.317Z,1492174870.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:01:11.112Z,1492174871.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:01:32.463Z,1492174892.463 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:01:32.463Z,1492174892.463 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:01:32.463Z,1492174892.463 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:01:32.463Z,1492174892.463 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:01:32.851Z,1492174892.851 [Default:CheckIn:D] Stopped
2017-04-14T13:01:32.851Z,1492174892.851 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:01:33.298Z,1492174893.298 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 575.458854 min 
2017-04-14T13:01:33.298Z,1492174893.298 [Default:CheckIn:E] Stopped
2017-04-14T13:01:33.298Z,1492174893.298 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:01:33.298Z,1492174893.298 [Default:CheckIn] Stopped
2017-04-14T13:01:33.298Z,1492174893.298 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:01:33.299Z,1492174893.299 [Default:CheckIn](INFO): Running loop #83
2017-04-14T13:01:33.299Z,1492174893.299 [Default:CheckIn] Running Loop=83
2017-04-14T13:01:33.299Z,1492174893.299 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:01:33.299Z,1492174893.299 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:01:36.857Z,1492174896.857 [NAL9602](INFO): Powering up
2017-04-14T13:01:48.009Z,1492174908.009 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:01:56.455Z,1492174916.455 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:01:56.456Z,1492174916.456 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:01:56.456Z,1492174916.456 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:01:56.498Z,1492174916.498 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:01:56.904Z,1492174916.904 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:01:56.904Z,1492174916.904 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:01:57.251Z,1492174917.251 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:01:57.252Z,1492174917.251 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:01:57.252Z,1492174917.252 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:02:19.998Z,1492174939.998 [NAL9602](INFO): SBD MO Status=0, MOMSN=2175, MT Status=0, MTMSN=0
2017-04-14T13:02:19.998Z,1492174939.998 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:02:21.000Z,1492174941.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:02:21.796Z,1492174941.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:02:26.400Z,1492174946.400 [NAL9602](INFO): GPS fix at 20170414T130319: (36.802406, -121.787124)
2017-04-14T13:02:26.477Z,1492174946.477 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:02:26.477Z,1492174946.477 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:02:32.289Z,1492174952.289 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:02:32.290Z,1492174952.290 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:02:32.290Z,1492174952.290 [BPC1](ERROR): Data Fault
2017-04-14T13:02:32.320Z,1492174952.320 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:02:32.396Z,1492174952.395 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0336.lzma
2017-04-14T13:02:33.134Z,1492174953.134 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0336.lzma.bak
2017-04-14T13:02:33.135Z,1492174953.135 [DataOverHttps](INFO): SBD MOMSN=4886022
2017-04-14T13:02:33.237Z,1492174953.237 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:02:33.237Z,1492174953.237 [BPC1] No Fault, FailCount= 1
2017-04-14T13:02:37.485Z,1492174957.485 [NAL9602](INFO): Powering down
2017-04-14T13:02:42.684Z,1492174962.684 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0337.lzma
2017-04-14T13:02:43.454Z,1492174963.454 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0337.lzma.bak
2017-04-14T13:02:43.454Z,1492174963.454 [DataOverHttps](INFO): SBD MOMSN=4886025
2017-04-14T13:02:43.936Z,1492174963.935 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:02:43.936Z,1492174963.936 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:02:43.936Z,1492174963.936 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:02:48.111Z,1492174968.111 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:03:03.368Z,1492174983.368 [PNI_TCM](ERROR): CRC does not match. Expected:0x32824 got:0x16402
2017-04-14T13:03:09.364Z,1492174989.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x64187 got:0x17947
2017-04-14T13:03:30.884Z,1492175010.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:03:31.682Z,1492175011.682 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:03:44.140Z,1492175024.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:03:44.937Z,1492175024.937 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:04:02.058Z,1492175042.058 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:04:02.058Z,1492175042.058 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:04:02.058Z,1492175042.058 [BPC1](ERROR): Data Fault
2017-04-14T13:04:02.130Z,1492175042.130 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:04:03.226Z,1492175043.226 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:04:03.226Z,1492175043.226 [BPC1] No Fault, FailCount= 1
2017-04-14T13:04:53.198Z,1492175093.197 [PNI_TCM](ERROR): CRC does not match. Expected:0x56021 got:0x6977
2017-04-14T13:04:54.768Z,1492175094.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:04:55.571Z,1492175095.571 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:04:57.638Z,1492175097.638 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:04:57.638Z,1492175097.638 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:04:57.638Z,1492175097.638 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:04:57.654Z,1492175097.654 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:04:58.064Z,1492175098.064 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:04:58.064Z,1492175098.064 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:04:58.447Z,1492175098.447 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:04:58.447Z,1492175098.447 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:04:58.448Z,1492175098.448 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:05:49.092Z,1492175149.092 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:05:49.094Z,1492175149.094 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:05:49.094Z,1492175149.094 [BPC1](ERROR): Communications Fault
2017-04-14T13:05:49.195Z,1492175149.195 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:05:50.118Z,1492175150.118 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:05:50.118Z,1492175150.118 [BPC1] No Fault, FailCount= 1
2017-04-14T13:06:03.903Z,1492175163.903 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:06:04.702Z,1492175164.702 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:06:18.638Z,1492175178.638 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:06:19.436Z,1492175179.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:06:51.044Z,1492175211.044 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:06:51.044Z,1492175211.044 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:06:51.044Z,1492175211.044 [BPC1](ERROR): Communications Fault
2017-04-14T13:06:51.166Z,1492175211.166 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:06:52.141Z,1492175212.141 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:06:52.141Z,1492175212.141 [BPC1] No Fault, FailCount= 1
2017-04-14T13:07:28.556Z,1492175248.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:07:29.361Z,1492175249.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:07:44.489Z,1492175264.489 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:07:44.489Z,1492175264.490 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:07:44.489Z,1492175264.490 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:07:44.490Z,1492175264.490 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:07:44.904Z,1492175264.904 [Default:CheckIn:D] Stopped
2017-04-14T13:07:44.905Z,1492175264.905 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:07:45.275Z,1492175265.275 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 581.659570 min 
2017-04-14T13:07:45.277Z,1492175265.277 [Default:CheckIn:E] Stopped
2017-04-14T13:07:45.277Z,1492175265.277 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:07:45.277Z,1492175265.277 [Default:CheckIn] Stopped
2017-04-14T13:07:45.277Z,1492175265.277 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:07:45.278Z,1492175265.277 [Default:CheckIn](INFO): Running loop #84
2017-04-14T13:07:45.278Z,1492175265.278 [Default:CheckIn] Running Loop=84
2017-04-14T13:07:45.278Z,1492175265.278 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:07:45.278Z,1492175265.278 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:07:49.820Z,1492175269.819 [NAL9602](INFO): Powering up
2017-04-14T13:07:58.676Z,1492175278.676 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:07:58.676Z,1492175278.676 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:07:58.676Z,1492175278.676 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:07:58.690Z,1492175278.690 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:07:59.090Z,1492175279.091 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:07:59.091Z,1492175279.091 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:07:59.481Z,1492175279.481 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:07:59.482Z,1492175279.482 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:07:59.482Z,1492175279.482 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:08:01.002Z,1492175281.002 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:08:12.036Z,1492175292.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:12.832Z,1492175292.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:28.602Z,1492175308.602 [NAL9602](INFO): SBD MO Status=0, MOMSN=2176, MT Status=0, MTMSN=0
2017-04-14T13:08:28.602Z,1492175308.602 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:08:38.408Z,1492175318.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:39.009Z,1492175319.009 [NAL9602](INFO): GPS fix at 20170414T130932: (36.802313, -121.787128)
2017-04-14T13:08:39.079Z,1492175319.079 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:08:39.079Z,1492175319.079 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:08:39.204Z,1492175319.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:44.277Z,1492175324.277 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0340.lzma
2017-04-14T13:08:45.097Z,1492175325.097 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0340.lzma.bak
2017-04-14T13:08:45.097Z,1492175325.097 [DataOverHttps](INFO): SBD MOMSN=4886029
2017-04-14T13:08:50.553Z,1492175330.553 [NAL9602](INFO): Powering down
2017-04-14T13:08:52.408Z,1492175332.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:53.205Z,1492175333.205 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:08:56.276Z,1492175336.276 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0341.lzma
2017-04-14T13:08:57.081Z,1492175337.081 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0341.lzma.bak
2017-04-14T13:08:57.081Z,1492175337.081 [DataOverHttps](INFO): SBD MOMSN=4886032
2017-04-14T13:08:57.675Z,1492175337.675 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:08:57.675Z,1492175337.675 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:08:57.675Z,1492175337.675 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:09:31.375Z,1492175371.375 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T13:09:31.375Z,1492175371.375 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:09:31.375Z,1492175371.375 [BPC1](ERROR): Data Fault
2017-04-14T13:09:31.428Z,1492175371.428 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:09:32.630Z,1492175372.630 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:09:32.630Z,1492175372.630 [BPC1] No Fault, FailCount= 1
2017-04-14T13:09:48.300Z,1492175388.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:09:49.096Z,1492175389.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:10:01.520Z,1492175401.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:10:02.317Z,1492175402.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:10:30.514Z,1492175430.514 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T13:10:30.514Z,1492175430.514 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:10:30.514Z,1492175430.514 [BPC1](ERROR): Data Fault
2017-04-14T13:10:30.599Z,1492175430.599 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:10:31.757Z,1492175431.757 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:10:31.757Z,1492175431.757 [BPC1] No Fault, FailCount= 1
2017-04-14T13:10:45.788Z,1492175445.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:10:46.584Z,1492175446.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:11:02.812Z,1492175462.812 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:11:02.812Z,1492175462.812 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:11:02.812Z,1492175462.812 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:11:02.910Z,1492175462.910 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:11:03.105Z,1492175463.105 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:11:03.105Z,1492175463.105 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:11:03.454Z,1492175463.454 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:11:03.455Z,1492175463.455 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:11:03.459Z,1492175463.459 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:11:11.452Z,1492175471.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:11:12.248Z,1492175472.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:11:30.174Z,1492175490.174 [PNI_TCM](ERROR): CRC does not match. Expected:0x33262 got:0x62232
2017-04-14T13:11:43.766Z,1492175503.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x11067 got:0x1857
2017-04-14T13:11:46.957Z,1492175506.957 [PNI_TCM](ERROR): CRC does not match. Expected:0x58926 got:0x46310
2017-04-14T13:12:22.128Z,1492175542.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:12:22.924Z,1492175542.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:12:36.085Z,1492175556.085 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:12:36.880Z,1492175556.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:12:48.404Z,1492175568.404 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:13:31.200Z,1492175611.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:13:31.997Z,1492175611.997 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:13:57.146Z,1492175637.146 [PNI_TCM](ERROR): CRC does not match. Expected:0x12070 got:0x7489
2017-04-14T13:13:57.964Z,1492175637.964 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:13:57.964Z,1492175637.964 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:13:57.964Z,1492175637.964 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:13:57.964Z,1492175637.964 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:13:58.408Z,1492175638.408 [Default:CheckIn:D] Stopped
2017-04-14T13:13:58.408Z,1492175638.408 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:13:58.814Z,1492175638.814 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 587.884831 min 
2017-04-14T13:13:58.815Z,1492175638.815 [Default:CheckIn:E] Stopped
2017-04-14T13:13:58.815Z,1492175638.815 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:13:58.815Z,1492175638.815 [Default:CheckIn] Stopped
2017-04-14T13:13:58.815Z,1492175638.815 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:13:58.816Z,1492175638.816 [Default:CheckIn](INFO): Running loop #85
2017-04-14T13:13:58.816Z,1492175638.816 [Default:CheckIn] Running Loop=85
2017-04-14T13:13:58.816Z,1492175638.816 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:13:58.816Z,1492175638.816 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:14:02.727Z,1492175642.727 [NAL9602](INFO): Powering up
2017-04-14T13:14:03.749Z,1492175643.749 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:14:03.749Z,1492175643.749 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:14:03.749Z,1492175643.749 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:14:03.763Z,1492175643.763 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:14:04.198Z,1492175644.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:14:04.199Z,1492175644.198 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:14:04.533Z,1492175644.533 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:14:04.583Z,1492175644.583 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:14:04.585Z,1492175644.585 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:14:13.673Z,1492175653.673 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:14:29.259Z,1492175669.259 [NAL9602](INFO): SBD MO Status=0, MOMSN=2177, MT Status=0, MTMSN=0
2017-04-14T13:14:29.259Z,1492175669.259 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:14:36.457Z,1492175676.457 [NAL9602](INFO): GPS fix at 20170414T131530: (36.802359, -121.787222)
2017-04-14T13:14:36.652Z,1492175676.652 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:14:36.652Z,1492175676.652 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:14:41.580Z,1492175681.580 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0344.lzma
2017-04-14T13:14:42.359Z,1492175682.359 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0344.lzma.bak
2017-04-14T13:14:42.359Z,1492175682.359 [DataOverHttps](INFO): SBD MOMSN=4886036
2017-04-14T13:14:46.940Z,1492175686.940 [NAL9602](INFO): Powering down
2017-04-14T13:14:52.531Z,1492175692.531 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0345.lzma
2017-04-14T13:14:53.234Z,1492175693.234 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0345.lzma.bak
2017-04-14T13:14:53.235Z,1492175693.234 [DataOverHttps](INFO): SBD MOMSN=4886039
2017-04-14T13:14:53.750Z,1492175693.750 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:14:53.751Z,1492175693.750 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:14:53.751Z,1492175693.751 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:14:55.044Z,1492175695.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:14:55.841Z,1492175695.841 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:15:16.250Z,1492175716.250 [PNI_TCM](ERROR): CRC does not match. Expected:0x1793 got:0x34557
2017-04-14T13:16:05.712Z,1492175765.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:16:06.508Z,1492175766.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:16:14.637Z,1492175774.637 [BPC1](ERROR): Failed to parse message.
2017-04-14T13:16:14.637Z,1492175774.637 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T13:16:14.637Z,1492175774.637 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:16:14.637Z,1492175774.637 [BPC1](ERROR): Data Fault
2017-04-14T13:16:14.727Z,1492175774.727 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:16:15.902Z,1492175775.902 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:16:15.902Z,1492175775.902 [BPC1] No Fault, FailCount= 1
2017-04-14T13:17:04.683Z,1492175824.683 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:17:04.683Z,1492175824.683 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:17:04.683Z,1492175824.683 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:17:04.844Z,1492175824.844 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:17:05.164Z,1492175825.164 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:17:05.164Z,1492175825.164 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:17:05.559Z,1492175825.559 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:17:05.560Z,1492175825.560 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:17:05.560Z,1492175825.560 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:17:11.421Z,1492175831.421 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:17:11.421Z,1492175831.421 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:17:11.421Z,1492175831.421 [BPC1](ERROR): Data Fault
2017-04-14T13:17:11.493Z,1492175831.493 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:17:12.682Z,1492175832.682 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:17:12.682Z,1492175832.682 [BPC1] No Fault, FailCount= 1
2017-04-14T13:17:29.594Z,1492175849.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:17:30.388Z,1492175850.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:17:39.023Z,1492175859.023 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:17:39.023Z,1492175859.023 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:17:39.023Z,1492175859.023 [BPC1](ERROR): Data Fault
2017-04-14T13:17:39.054Z,1492175859.054 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:17:40.379Z,1492175860.379 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:17:40.379Z,1492175860.379 [BPC1] No Fault, FailCount= 1
2017-04-14T13:18:07.149Z,1492175887.149 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:18:07.149Z,1492175887.149 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:18:07.149Z,1492175887.149 [BPC1](ERROR): Data Fault
2017-04-14T13:18:07.217Z,1492175887.217 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:18:08.435Z,1492175888.435 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:18:08.436Z,1492175888.436 [BPC1] No Fault, FailCount= 1
2017-04-14T13:18:16.773Z,1492175896.773 [PNI_TCM](ERROR): CRC does not match. Expected:0x38743 got:0x16748
2017-04-14T13:18:38.688Z,1492175918.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:18:39.484Z,1492175919.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:19:41.425Z,1492175981.425 [PNI_TCM](ERROR): CRC does not match. Expected:0x45968 got:0x9711
2017-04-14T13:19:48.578Z,1492175988.578 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:19:49.373Z,1492175989.373 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:19:54.250Z,1492175994.250 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:19:54.250Z,1492175994.250 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:19:54.250Z,1492175994.250 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:19:54.250Z,1492175994.250 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:19:54.653Z,1492175994.653 [Default:CheckIn:D] Stopped
2017-04-14T13:19:54.653Z,1492175994.653 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:19:55.069Z,1492175995.069 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 593.822266 min 
2017-04-14T13:19:55.069Z,1492175995.069 [Default:CheckIn:E] Stopped
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn] Stopped
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn](INFO): Running loop #86
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn] Running Loop=86
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:19:55.070Z,1492175995.070 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:19:59.481Z,1492175999.481 [NAL9602](INFO): Powering up
2017-04-14T13:20:05.935Z,1492176005.935 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:20:05.935Z,1492176005.935 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:20:05.935Z,1492176005.935 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:20:05.977Z,1492176005.977 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:20:06.328Z,1492176006.328 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:20:06.328Z,1492176006.328 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:20:06.698Z,1492176006.698 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:20:06.698Z,1492176006.698 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:20:06.699Z,1492176006.699 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:20:10.645Z,1492176010.645 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:20:28.650Z,1492176028.650 [NAL9602](INFO): SBD MO Status=0, MOMSN=2178, MT Status=0, MTMSN=0
2017-04-14T13:20:28.651Z,1492176028.651 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:20:36.263Z,1492176036.263 [NAL9602](INFO): GPS fix at 20170414T132130: (36.802349, -121.787150)
2017-04-14T13:20:36.327Z,1492176036.328 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:20:36.328Z,1492176036.328 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:20:42.807Z,1492176042.807 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20170414T032153/Courier0348.lzma
2017-04-14T13:20:43.594Z,1492176043.594 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0348.lzma.bak
2017-04-14T13:20:43.595Z,1492176043.595 [DataOverHttps](INFO): SBD MOMSN=4886043
2017-04-14T13:20:43.619Z,1492176043.619 [NAL9602](INFO): Powering down
2017-04-14T13:20:53.160Z,1492176053.160 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0349.lzma
2017-04-14T13:20:53.973Z,1492176053.973 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0349.lzma.bak
2017-04-14T13:20:53.974Z,1492176053.974 [DataOverHttps](INFO): SBD MOMSN=4886046
2017-04-14T13:20:54.441Z,1492176054.441 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:20:54.441Z,1492176054.441 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:20:54.442Z,1492176054.441 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:20:59.276Z,1492176059.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:21:00.072Z,1492176060.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:21:31.648Z,1492176091.648 [PNI_TCM](ERROR): CRC does not match. Expected:0x41294 got:0x6336
2017-04-14T13:22:23.132Z,1492176143.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:22:23.928Z,1492176143.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:22:48.639Z,1492176168.639 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:23:06.766Z,1492176186.766 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:23:06.766Z,1492176186.766 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:23:06.766Z,1492176186.766 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:23:06.822Z,1492176186.822 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:23:07.141Z,1492176187.141 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:23:07.142Z,1492176187.142 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:23:07.542Z,1492176187.542 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:23:07.542Z,1492176187.542 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:23:07.543Z,1492176187.543 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:23:12.306Z,1492176192.306 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-04-14T13:23:13.896Z,1492176193.895 [PNI_TCM](ERROR): CRC does not match. Expected:0x63573 got:0x27756
2017-04-14T13:23:20.283Z,1492176200.283 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T13:23:32.230Z,1492176212.230 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:23:33.024Z,1492176213.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:24:07.411Z,1492176247.411 [PNI_TCM](ERROR): CRC does not match. Expected:0x29870 got:0x33043
2017-04-14T13:24:09.802Z,1492176249.802 [PNI_TCM](ERROR): CRC does not match. Expected:0x36767 got:0x1857
2017-04-14T13:24:42.904Z,1492176282.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:24:43.700Z,1492176283.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:24:56.116Z,1492176296.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:24:56.912Z,1492176296.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:25:45.328Z,1492176345.328 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:25:45.328Z,1492176345.328 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:25:45.328Z,1492176345.328 [BPC1](ERROR): Communications Fault
2017-04-14T13:25:45.358Z,1492176345.358 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:25:46.587Z,1492176346.587 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:25:46.587Z,1492176346.587 [BPC1] No Fault, FailCount= 1
2017-04-14T13:25:54.948Z,1492176354.948 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:25:54.948Z,1492176354.948 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:25:54.948Z,1492176354.948 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:25:54.948Z,1492176354.948 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:25:55.349Z,1492176355.349 [Default:CheckIn:D] Stopped
2017-04-14T13:25:55.349Z,1492176355.349 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:25:55.745Z,1492176355.745 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 599.833854 min 
2017-04-14T13:25:55.745Z,1492176355.745 [Default:CheckIn:E] Stopped
2017-04-14T13:25:55.745Z,1492176355.745 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:25:55.745Z,1492176355.745 [Default:CheckIn] Stopped
2017-04-14T13:25:55.745Z,1492176355.745 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:25:55.746Z,1492176355.746 [Default:CheckIn](INFO): Running loop #87
2017-04-14T13:25:55.746Z,1492176355.746 [Default:CheckIn] Running Loop=87
2017-04-14T13:25:55.746Z,1492176355.746 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:25:55.746Z,1492176355.746 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:25:59.970Z,1492176359.970 [NAL9602](INFO): Powering up
2017-04-14T13:26:06.040Z,1492176366.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:26:06.836Z,1492176366.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:26:07.652Z,1492176367.652 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:26:07.652Z,1492176367.652 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:26:07.652Z,1492176367.652 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:26:07.665Z,1492176367.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:26:08.121Z,1492176368.121 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:26:08.121Z,1492176368.121 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:26:08.465Z,1492176368.464 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:26:08.465Z,1492176368.465 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:26:08.465Z,1492176368.465 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:26:10.765Z,1492176370.765 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:26:16.008Z,1492176376.008 [PNI_TCM](ERROR): CRC does not match. Expected:0x48411 got:0x46289
2017-04-14T13:26:22.410Z,1492176382.410 [PNI_TCM](ERROR): CRC does not match. Expected:0x12518 got:0x1857
2017-04-14T13:26:26.766Z,1492176386.766 [NAL9602](INFO): SBD MO Status=0, MOMSN=2179, MT Status=0, MTMSN=0
2017-04-14T13:26:26.766Z,1492176386.766 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:26:34.368Z,1492176394.368 [NAL9602](INFO): GPS fix at 20170414T132729: (36.802422, -121.787144)
2017-04-14T13:26:34.482Z,1492176394.482 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:26:34.482Z,1492176394.482 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:26:40.328Z,1492176400.328 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0352.lzma
2017-04-14T13:26:41.132Z,1492176401.132 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0352.lzma.bak
2017-04-14T13:26:41.133Z,1492176401.133 [DataOverHttps](INFO): SBD MOMSN=4886050
2017-04-14T13:26:45.828Z,1492176405.828 [NAL9602](INFO): Powering down
2017-04-14T13:26:51.277Z,1492176411.277 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0353.lzma
2017-04-14T13:26:52.006Z,1492176412.006 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0353.lzma.bak
2017-04-14T13:26:52.007Z,1492176412.007 [DataOverHttps](INFO): SBD MOMSN=4886053
2017-04-14T13:26:52.578Z,1492176412.578 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:26:52.578Z,1492176412.578 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:26:52.578Z,1492176412.578 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:27:16.688Z,1492176436.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:27:17.485Z,1492176437.485 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:27:30.680Z,1492176450.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:27:31.477Z,1492176451.477 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:28:25.787Z,1492176505.787 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:28:26.584Z,1492176506.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:28:28.673Z,1492176508.673 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:28:28.673Z,1492176508.673 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:28:28.673Z,1492176508.673 [BPC1](ERROR): Data Fault
2017-04-14T13:28:28.743Z,1492176508.743 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:28:29.917Z,1492176509.917 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:28:29.917Z,1492176509.917 [BPC1] No Fault, FailCount= 1
2017-04-14T13:28:45.883Z,1492176525.883 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:28:45.883Z,1492176525.883 [BPC1] Communications Fault, FailCount= 2
2017-04-14T13:28:45.883Z,1492176525.883 [BPC1](ERROR): Communications Fault
2017-04-14T13:28:45.994Z,1492176525.994 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:28:47.223Z,1492176527.223 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:28:47.223Z,1492176527.223 [BPC1] No Fault, FailCount= 2
2017-04-14T13:29:08.492Z,1492176548.492 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:29:08.492Z,1492176548.492 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:29:08.492Z,1492176548.492 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:29:08.505Z,1492176548.505 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:29:08.950Z,1492176548.950 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:29:08.950Z,1492176548.950 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:29:09.298Z,1492176549.298 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:29:09.298Z,1492176549.298 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:29:09.299Z,1492176549.299 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:29:35.729Z,1492176575.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:29:36.524Z,1492176576.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:29:42.085Z,1492176582.085 [PNI_TCM](ERROR): CRC does not match. Expected:0x43818 got:0x49445
2017-04-14T13:29:45.314Z,1492176585.314 [PNI_TCM](ERROR): CRC does not match. Expected:0x42817 got:0x33129
2017-04-14T13:29:48.480Z,1492176588.480 [PNI_TCM](ERROR): CRC does not match. Expected:0x36843 got:0x6336
2017-04-14T13:30:59.560Z,1492176659.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:31:00.357Z,1492176660.357 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:31:14.666Z,1492176674.666 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:31:14.666Z,1492176674.666 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:31:14.666Z,1492176674.666 [BPC1](ERROR): Communications Fault
2017-04-14T13:31:14.718Z,1492176674.718 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:31:15.926Z,1492176675.926 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:31:15.927Z,1492176675.927 [BPC1] No Fault, FailCount= 1
2017-04-14T13:31:53.138Z,1492176713.138 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:31:53.138Z,1492176713.138 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:31:53.138Z,1492176713.138 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:31:53.139Z,1492176713.138 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:31:53.503Z,1492176713.503 [Default:CheckIn:D] Stopped
2017-04-14T13:31:53.503Z,1492176713.503 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:31:53.903Z,1492176713.903 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 605.803060 min 
2017-04-14T13:31:53.903Z,1492176713.903 [Default:CheckIn:E] Stopped
2017-04-14T13:31:53.903Z,1492176713.903 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:31:53.903Z,1492176713.903 [Default:CheckIn] Stopped
2017-04-14T13:31:53.903Z,1492176713.903 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:31:53.904Z,1492176713.904 [Default:CheckIn](INFO): Running loop #88
2017-04-14T13:31:53.904Z,1492176713.904 [Default:CheckIn] Running Loop=88
2017-04-14T13:31:53.904Z,1492176713.904 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:31:53.904Z,1492176713.904 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:31:58.862Z,1492176718.862 [NAL9602](INFO): Powering up
2017-04-14T13:31:59.881Z,1492176719.881 [PNI_TCM](ERROR): CRC does not match. Expected:0x54360 got:0x40987
2017-04-14T13:32:02.672Z,1492176722.672 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T13:32:09.498Z,1492176729.498 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:32:09.498Z,1492176729.498 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:32:09.498Z,1492176729.498 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:32:09.524Z,1492176729.524 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:32:09.837Z,1492176729.837 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:32:09.927Z,1492176729.927 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:32:09.928Z,1492176729.928 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:32:10.232Z,1492176730.232 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:32:10.300Z,1492176730.300 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:32:10.300Z,1492176730.300 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:32:10.301Z,1492176730.300 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:32:11.028Z,1492176731.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:32:24.213Z,1492176744.214 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:32:25.008Z,1492176745.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:32:25.434Z,1492176745.434 [NAL9602](INFO): SBD MO Status=0, MOMSN=2180, MT Status=0, MTMSN=0
2017-04-14T13:32:25.434Z,1492176745.434 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:32:35.037Z,1492176755.037 [NAL9602](INFO): GPS fix at 20170414T133330: (36.802344, -121.787122)
2017-04-14T13:32:35.120Z,1492176755.120 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:32:35.120Z,1492176755.120 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:32:40.152Z,1492176760.152 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0356.lzma
2017-04-14T13:32:40.947Z,1492176760.947 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0356.lzma.bak
2017-04-14T13:32:40.966Z,1492176760.966 [DataOverHttps](INFO): SBD MOMSN=4886057
2017-04-14T13:32:45.382Z,1492176765.382 [NAL9602](INFO): Powering down
2017-04-14T13:32:50.576Z,1492176770.576 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:32:50.644Z,1492176770.644 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0357.lzma
2017-04-14T13:32:51.394Z,1492176771.394 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0357.lzma.bak
2017-04-14T13:32:51.395Z,1492176771.395 [DataOverHttps](INFO): SBD MOMSN=4886060
2017-04-14T13:32:51.892Z,1492176771.892 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:32:51.892Z,1492176771.892 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:32:51.892Z,1492176771.892 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:33:20.100Z,1492176800.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:33:20.896Z,1492176800.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:33:34.100Z,1492176814.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:33:34.896Z,1492176814.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:02.048Z,1492176842.048 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:02.844Z,1492176842.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:03.588Z,1492176843.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:04.384Z,1492176844.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:05.181Z,1492176845.181 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:05.592Z,1492176845.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:29.000Z,1492176870.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:30.796Z,1492176870.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:43.972Z,1492176883.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:34:44.768Z,1492176884.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:35:10.322Z,1492176910.322 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:35:10.322Z,1492176910.322 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:35:10.323Z,1492176910.323 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:35:10.365Z,1492176910.365 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:35:10.781Z,1492176910.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:35:10.781Z,1492176910.781 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:35:11.081Z,1492176911.081 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:35:11.081Z,1492176911.081 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:35:11.081Z,1492176911.081 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:35:53.088Z,1492176953.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:35:53.884Z,1492176953.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:37:02.984Z,1492177022.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:37:03.780Z,1492177023.780 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:37:16.976Z,1492177036.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:37:17.772Z,1492177037.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:37:52.549Z,1492177072.549 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:37:52.549Z,1492177072.549 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:37:52.549Z,1492177072.549 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:37:52.549Z,1492177072.549 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:37:52.954Z,1492177072.954 [Default:CheckIn:D] Stopped
2017-04-14T13:37:52.955Z,1492177072.954 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:37:56.603Z,1492177076.603 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 611.793945 min 
2017-04-14T13:37:56.603Z,1492177076.603 [Default:CheckIn:E] Stopped
2017-04-14T13:37:56.604Z,1492177076.603 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn] Stopped
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn](INFO): Running loop #89
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn] Running Loop=89
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:37:56.604Z,1492177076.604 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:37:57.054Z,1492177077.054 [NAL9602](INFO): Powering up
2017-04-14T13:38:08.245Z,1492177088.245 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:38:11.114Z,1492177091.114 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:38:11.114Z,1492177091.114 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:38:11.114Z,1492177091.114 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:38:11.145Z,1492177091.145 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:38:11.569Z,1492177091.569 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:38:11.569Z,1492177091.569 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:38:11.910Z,1492177091.910 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:38:11.910Z,1492177091.910 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:38:11.910Z,1492177091.910 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:38:13.660Z,1492177093.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:38:14.456Z,1492177094.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:38:23.858Z,1492177103.858 [NAL9602](INFO): SBD MO Status=0, MOMSN=2181, MT Status=0, MTMSN=0
2017-04-14T13:38:23.858Z,1492177103.858 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:38:27.648Z,1492177107.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:38:27.899Z,1492177107.899 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:38:27.899Z,1492177107.899 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:38:27.899Z,1492177107.899 [BPC1](ERROR): Communications Fault
2017-04-14T13:38:27.936Z,1492177107.936 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:38:28.445Z,1492177108.445 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:38:29.165Z,1492177109.165 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:38:29.165Z,1492177109.165 [BPC1] No Fault, FailCount= 1
2017-04-14T13:38:34.249Z,1492177114.249 [NAL9602](INFO): GPS fix at 20170414T133930: (36.802297, -121.787166)
2017-04-14T13:38:34.407Z,1492177114.407 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:38:34.407Z,1492177114.407 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:38:39.520Z,1492177119.520 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0360.lzma
2017-04-14T13:38:40.318Z,1492177120.318 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0360.lzma.bak
2017-04-14T13:38:40.319Z,1492177120.319 [DataOverHttps](INFO): SBD MOMSN=4886064
2017-04-14T13:38:44.527Z,1492177124.527 [NAL9602](INFO): Powering down
2017-04-14T13:38:49.808Z,1492177129.808 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0361.lzma
2017-04-14T13:38:50.574Z,1492177130.574 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0361.lzma.bak
2017-04-14T13:38:50.575Z,1492177130.575 [DataOverHttps](INFO): SBD MOMSN=4886067
2017-04-14T13:38:51.054Z,1492177131.054 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:38:51.054Z,1492177131.055 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:38:51.055Z,1492177131.055 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:38:56.431Z,1492177136.431 [PNI_TCM](ERROR): CRC does not match. Expected:0x55440 got:0x9552
2017-04-14T13:38:59.632Z,1492177139.632 [PNI_TCM](ERROR): CRC does not match. Expected:0x10375 got:0x27147
2017-04-14T13:39:04.445Z,1492177144.445 [PNI_TCM](ERROR): CRC does not match. Expected:0x36612 got:0x49445
2017-04-14T13:39:11.227Z,1492177151.227 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:39:11.227Z,1492177151.227 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:39:11.227Z,1492177151.227 [BPC1](ERROR): Data Fault
2017-04-14T13:39:11.294Z,1492177151.294 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:39:12.492Z,1492177152.492 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:39:12.492Z,1492177152.492 [BPC1] No Fault, FailCount= 1
2017-04-14T13:39:36.732Z,1492177176.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:39:37.529Z,1492177177.529 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:40:47.430Z,1492177247.430 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:40:48.224Z,1492177248.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:41:11.968Z,1492177271.968 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:41:11.968Z,1492177271.968 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:41:11.968Z,1492177271.968 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:41:11.993Z,1492177271.993 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:41:12.352Z,1492177272.352 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:41:12.352Z,1492177272.352 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:41:12.794Z,1492177272.794 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:41:12.795Z,1492177272.795 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:41:12.795Z,1492177272.795 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:41:56.544Z,1492177316.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:41:57.340Z,1492177317.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:42:11.318Z,1492177331.318 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:42:12.112Z,1492177332.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:42:50.866Z,1492177370.866 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:43:07.204Z,1492177387.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:43:07.000Z,1492177388.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:43:21.193Z,1492177401.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:43:21.988Z,1492177401.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:43:51.484Z,1492177431.484 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:43:51.485Z,1492177431.485 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:43:51.485Z,1492177431.485 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:43:51.485Z,1492177431.485 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:43:51.892Z,1492177431.892 [Default:CheckIn:D] Stopped
2017-04-14T13:43:51.892Z,1492177431.892 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:43:52.389Z,1492177432.389 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 617.776237 min 
2017-04-14T13:43:52.389Z,1492177432.389 [Default:CheckIn:E] Stopped
2017-04-14T13:43:52.389Z,1492177432.389 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:43:52.389Z,1492177432.389 [Default:CheckIn] Stopped
2017-04-14T13:43:52.389Z,1492177432.389 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:43:52.390Z,1492177432.390 [Default:CheckIn](INFO): Running loop #90
2017-04-14T13:43:52.390Z,1492177432.390 [Default:CheckIn] Running Loop=90
2017-04-14T13:43:52.390Z,1492177432.390 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:43:52.390Z,1492177432.390 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:43:55.872Z,1492177435.872 [NAL9602](INFO): Powering up
2017-04-14T13:44:07.046Z,1492177447.046 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:44:13.108Z,1492177453.108 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:44:13.108Z,1492177453.108 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:44:13.108Z,1492177453.108 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:44:13.142Z,1492177453.142 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:44:13.526Z,1492177453.526 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:44:13.526Z,1492177453.526 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:44:13.898Z,1492177453.898 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:44:13.898Z,1492177453.898 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:44:13.899Z,1492177453.899 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:44:19.054Z,1492177459.054 [NAL9602](INFO): SBD MO Status=0, MOMSN=2182, MT Status=0, MTMSN=0
2017-04-14T13:44:19.054Z,1492177459.054 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:44:27.479Z,1492177467.479 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:44:27.479Z,1492177467.479 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:44:27.479Z,1492177467.480 [BPC1](ERROR): Communications Fault
2017-04-14T13:44:27.555Z,1492177467.555 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:44:28.744Z,1492177468.744 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:44:28.745Z,1492177468.745 [BPC1] No Fault, FailCount= 1
2017-04-14T13:44:30.296Z,1492177470.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:44:31.092Z,1492177471.092 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:44:33.902Z,1492177473.902 [NAL9602](INFO): GPS fix at 20170414T134530: (36.802380, -121.787125)
2017-04-14T13:44:34.068Z,1492177474.068 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:44:34.068Z,1492177474.068 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:44:40.698Z,1492177480.698 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0364.lzma
2017-04-14T13:44:40.718Z,1492177480.718 [NAL9602](INFO): Powering down
2017-04-14T13:44:43.314Z,1492177483.314 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0364.lzma.bak
2017-04-14T13:44:43.314Z,1492177483.314 [DataOverHttps](INFO): SBD MOMSN=4886080
2017-04-14T13:44:48.455Z,1492177488.455 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:44:48.455Z,1492177488.455 [BPC1] Communications Fault, FailCount= 2
2017-04-14T13:44:48.455Z,1492177488.455 [BPC1](ERROR): Communications Fault
2017-04-14T13:44:48.529Z,1492177488.529 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:44:49.435Z,1492177489.435 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:44:49.435Z,1492177489.435 [BPC1] No Fault, FailCount= 2
2017-04-14T13:44:54.954Z,1492177494.954 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0365.lzma
2017-04-14T13:44:55.758Z,1492177495.758 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0365.lzma.bak
2017-04-14T13:44:55.758Z,1492177495.759 [DataOverHttps](INFO): SBD MOMSN=4886083
2017-04-14T13:44:56.279Z,1492177496.279 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:44:56.279Z,1492177496.279 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:44:56.279Z,1492177496.279 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:45:40.964Z,1492177540.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:45:41.760Z,1492177541.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:45:54.950Z,1492177554.950 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:45:55.744Z,1492177555.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:46:50.848Z,1492177610.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:46:51.644Z,1492177611.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:47:04.836Z,1492177624.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:47:05.632Z,1492177625.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:47:13.944Z,1492177633.944 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:47:13.944Z,1492177633.944 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:47:13.944Z,1492177633.944 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:47:13.979Z,1492177633.979 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:47:14.282Z,1492177634.282 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T13:47:14.282Z,1492177634.282 [BPC1] Data Fault, FailCount= 1
2017-04-14T13:47:14.282Z,1492177634.282 [BPC1](ERROR): Data Fault
2017-04-14T13:47:14.367Z,1492177634.367 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:47:14.367Z,1492177634.367 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:47:14.368Z,1492177634.368 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:47:14.719Z,1492177634.719 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:47:14.720Z,1492177634.720 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:47:14.720Z,1492177634.720 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:47:15.616Z,1492177635.616 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:47:15.616Z,1492177635.616 [BPC1] No Fault, FailCount= 1
2017-04-14T13:47:48.340Z,1492177668.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:47:49.136Z,1492177669.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:48:00.752Z,1492177680.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:48:01.548Z,1492177681.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:48:13.962Z,1492177693.962 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:48:14.762Z,1492177694.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:48:17.916Z,1492177697.916 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:48:17.916Z,1492177697.916 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:48:17.916Z,1492177697.916 [BPC1](ERROR): Communications Fault
2017-04-14T13:48:17.999Z,1492177697.999 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:48:19.141Z,1492177699.141 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:48:19.141Z,1492177699.141 [BPC1] No Fault, FailCount= 1
2017-04-14T13:48:30.278Z,1492177710.277 [BPC1](ERROR): Failed to parse message.
2017-04-14T13:48:30.278Z,1492177710.278 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T13:48:30.278Z,1492177710.278 [BPC1] Data Fault, FailCount= 2
2017-04-14T13:48:30.278Z,1492177710.278 [BPC1](ERROR): Data Fault
2017-04-14T13:48:30.357Z,1492177710.357 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T13:48:31.504Z,1492177711.504 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:48:31.505Z,1492177711.505 [BPC1] No Fault, FailCount= 2
2017-04-14T13:49:24.616Z,1492177764.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:49:25.412Z,1492177765.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:49:56.844Z,1492177796.844 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:49:56.844Z,1492177796.844 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:49:56.844Z,1492177796.844 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:49:56.844Z,1492177796.844 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:49:57.308Z,1492177797.309 [Default:CheckIn:D] Stopped
2017-04-14T13:49:57.309Z,1492177797.309 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:49:57.627Z,1492177797.627 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 623.866471 min 
2017-04-14T13:49:57.627Z,1492177797.627 [Default:CheckIn:E] Stopped
2017-04-14T13:49:57.627Z,1492177797.627 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:49:57.627Z,1492177797.627 [Default:CheckIn] Stopped
2017-04-14T13:49:57.627Z,1492177797.628 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:49:57.628Z,1492177797.628 [Default:CheckIn](INFO): Running loop #91
2017-04-14T13:49:57.628Z,1492177797.628 [Default:CheckIn] Running Loop=91
2017-04-14T13:49:57.628Z,1492177797.628 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:49:57.628Z,1492177797.628 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:50:01.391Z,1492177801.391 [NAL9602](INFO): Powering up
2017-04-14T13:50:12.589Z,1492177812.589 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:50:15.054Z,1492177815.054 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:50:15.054Z,1492177815.054 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:50:15.054Z,1492177815.054 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:50:15.068Z,1492177815.068 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:50:15.502Z,1492177815.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:50:15.503Z,1492177815.503 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:50:15.834Z,1492177815.834 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:50:15.843Z,1492177815.843 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:50:15.844Z,1492177815.844 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:50:28.983Z,1492177828.983 [NAL9602](INFO): SBD MO Status=0, MOMSN=2183, MT Status=0, MTMSN=0
2017-04-14T13:50:28.983Z,1492177828.983 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:50:33.401Z,1492177833.401 [NAL9602](INFO): GPS fix at 20170414T135130: (36.802350, -121.787123)
2017-04-14T13:50:33.489Z,1492177833.489 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:50:33.489Z,1492177833.489 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:50:34.500Z,1492177834.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:50:35.296Z,1492177835.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:50:38.521Z,1492177838.521 [DataOverHttps](INFO): Sending 62 bytes from file Logs/20170414T032153/Courier0368.lzma
2017-04-14T13:50:39.302Z,1492177839.302 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0368.lzma.bak
2017-04-14T13:50:39.303Z,1492177839.303 [DataOverHttps](INFO): SBD MOMSN=4886088
2017-04-14T13:50:43.717Z,1492177843.717 [NAL9602](INFO): Powering down
2017-04-14T13:50:48.584Z,1492177848.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:50:48.883Z,1492177848.883 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:50:48.883Z,1492177848.883 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:50:48.883Z,1492177848.883 [BPC1](ERROR): Communications Fault
2017-04-14T13:50:48.954Z,1492177848.954 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:50:48.977Z,1492177848.977 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0369.lzma
2017-04-14T13:50:49.381Z,1492177849.381 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:50:49.774Z,1492177849.774 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0369.lzma.bak
2017-04-14T13:50:49.775Z,1492177849.775 [DataOverHttps](INFO): SBD MOMSN=4886091
2017-04-14T13:50:49.879Z,1492177849.879 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:50:49.880Z,1492177849.880 [BPC1] No Fault, FailCount= 1
2017-04-14T13:50:50.321Z,1492177850.321 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:50:50.321Z,1492177850.321 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:50:50.322Z,1492177850.322 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:51:44.404Z,1492177904.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:51:45.200Z,1492177905.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:51:58.385Z,1492177918.385 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:51:59.180Z,1492177919.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:51.144Z,1492177971.144 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T13:52:52.240Z,1492177972.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:53.046Z,1492177973.046 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:53.526Z,1492177973.526 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:54.320Z,1492177974.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:55.117Z,1492177975.117 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:55.860Z,1492177975.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:52:56.658Z,1492177976.658 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:53:08.264Z,1492177988.264 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:53:09.060Z,1492177989.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:53:16.086Z,1492177996.086 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:53:16.086Z,1492177996.086 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:53:16.087Z,1492177996.087 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:53:16.100Z,1492177996.100 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:53:16.503Z,1492177996.503 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:53:16.503Z,1492177996.503 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:53:16.966Z,1492177996.966 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:53:16.967Z,1492177996.967 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:53:16.979Z,1492177996.979 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:54:14.047Z,1492178054.047 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:54:14.047Z,1492178054.047 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:54:14.048Z,1492178054.048 [BPC1](ERROR): Communications Fault
2017-04-14T13:54:14.116Z,1492178054.116 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:54:15.279Z,1492178055.279 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:54:15.279Z,1492178055.279 [BPC1] No Fault, FailCount= 1
2017-04-14T13:54:44.476Z,1492178084.476 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:54:44.476Z,1492178084.476 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:54:44.476Z,1492178084.476 [BPC1](ERROR): Communications Fault
2017-04-14T13:54:44.657Z,1492178084.657 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:54:45.853Z,1492178085.853 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:54:45.853Z,1492178085.853 [BPC1] No Fault, FailCount= 1
2017-04-14T13:55:27.256Z,1492178127.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:55:28.052Z,1492178128.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:55:51.029Z,1492178151.029 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T13:55:51.029Z,1492178151.029 [Default:CheckIn:C.Wait] Stopped
2017-04-14T13:55:51.029Z,1492178151.029 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T13:55:51.029Z,1492178151.029 [Default:CheckIn:D] Running Loop=1
2017-04-14T13:55:51.374Z,1492178151.374 [Default:CheckIn:D] Stopped
2017-04-14T13:55:51.374Z,1492178151.374 [Default:CheckIn:E] Running Loop=1
2017-04-14T13:55:51.786Z,1492178151.786 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 629.767578 min 
2017-04-14T13:55:51.786Z,1492178151.786 [Default:CheckIn:E] Stopped
2017-04-14T13:55:51.786Z,1492178151.786 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T13:55:51.786Z,1492178151.786 [Default:CheckIn] Stopped
2017-04-14T13:55:51.786Z,1492178151.786 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T13:55:51.787Z,1492178151.787 [Default:CheckIn](INFO): Running loop #92
2017-04-14T13:55:51.787Z,1492178151.787 [Default:CheckIn] Running Loop=92
2017-04-14T13:55:51.787Z,1492178151.787 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T13:55:51.803Z,1492178151.803 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T13:55:55.601Z,1492178155.601 [NAL9602](INFO): Powering up
2017-04-14T13:56:06.756Z,1492178166.756 [NAL9602](INFO): NAL9602 initialized
2017-04-14T13:56:17.231Z,1492178177.231 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:56:17.232Z,1492178177.232 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T13:56:17.232Z,1492178177.232 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:56:17.262Z,1492178177.262 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:56:17.628Z,1492178177.628 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:56:17.628Z,1492178177.628 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T13:56:18.016Z,1492178178.016 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:56:18.016Z,1492178178.016 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:56:18.017Z,1492178178.017 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T13:56:31.577Z,1492178191.577 [PNI_TCM](ERROR): CRC does not match. Expected:0x37843 got:0x9656
2017-04-14T13:56:36.389Z,1492178196.389 [PNI_TCM](ERROR): CRC does not match. Expected:0x22200 got:0x33126
2017-04-14T13:56:37.160Z,1492178197.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:56:37.957Z,1492178197.957 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:56:41.193Z,1492178201.193 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:56:41.194Z,1492178201.194 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:56:41.194Z,1492178201.194 [BPC1](ERROR): Communications Fault
2017-04-14T13:56:41.224Z,1492178201.224 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:56:42.479Z,1492178202.479 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:56:42.479Z,1492178202.479 [BPC1] No Fault, FailCount= 1
2017-04-14T13:56:43.592Z,1492178203.592 [PNI_TCM](ERROR): CRC does not match. Expected:0x30726 got:0x6336
2017-04-14T13:56:45.955Z,1492178205.955 [NAL9602](INFO): SBD MO Status=2, MOMSN=2184, MT Status=2, MTMSN=0
2017-04-14T13:56:45.955Z,1492178205.955 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T13:56:49.994Z,1492178209.994 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-04-14T13:57:06.686Z,1492178226.686 [NAL9602](INFO): SBD MO Status=0, MOMSN=2184, MT Status=0, MTMSN=0
2017-04-14T13:57:06.686Z,1492178226.686 [NAL9602](INFO): No messages in MT queue
2017-04-14T13:57:07.890Z,1492178227.889 [NAL9602](INFO): GPS fix at 20170414T135805: (36.802344, -121.787129)
2017-04-14T13:57:07.973Z,1492178227.973 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T13:57:07.973Z,1492178227.973 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T13:57:12.746Z,1492178232.746 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0372.lzma
2017-04-14T13:57:13.543Z,1492178233.543 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0372.lzma.bak
2017-04-14T13:57:13.543Z,1492178233.543 [DataOverHttps](INFO): SBD MOMSN=4886096
2017-04-14T13:57:17.745Z,1492178237.745 [NAL9602](INFO): Powering down
2017-04-14T13:57:23.048Z,1492178243.048 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0373.lzma
2017-04-14T13:57:23.758Z,1492178243.759 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0373.lzma.bak
2017-04-14T13:57:23.759Z,1492178243.759 [DataOverHttps](INFO): SBD MOMSN=4886099
2017-04-14T13:57:24.262Z,1492178244.262 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T13:57:24.262Z,1492178244.262 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T13:57:24.262Z,1492178244.262 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T13:57:47.832Z,1492178267.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:57:48.629Z,1492178268.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:01.808Z,1492178281.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:01.930Z,1492178281.930 [BPC1](ERROR): Failed to receive battery data
2017-04-14T13:58:01.930Z,1492178281.931 [BPC1] Communications Fault, FailCount= 1
2017-04-14T13:58:01.931Z,1492178281.931 [BPC1](ERROR): Communications Fault
2017-04-14T13:58:02.048Z,1492178282.048 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T13:58:02.604Z,1492178282.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:03.200Z,1492178283.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T13:58:03.201Z,1492178283.201 [BPC1] No Fault, FailCount= 1
2017-04-14T13:58:03.348Z,1492178283.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:04.144Z,1492178284.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:27.684Z,1492178307.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:28.480Z,1492178308.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:28.964Z,1492178308.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:29.760Z,1492178309.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:30.556Z,1492178310.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:31.308Z,1492178311.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:32.104Z,1492178312.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:57.724Z,1492178337.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:58:58.521Z,1492178338.521 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:59:11.700Z,1492178351.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:59:12.496Z,1492178352.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T13:59:18.294Z,1492178358.294 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T13:59:18.294Z,1492178358.294 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T13:59:18.294Z,1492178358.295 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T13:59:18.426Z,1492178358.427 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T13:59:18.733Z,1492178358.733 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T13:59:18.733Z,1492178358.733 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T13:59:19.085Z,1492178359.085 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T13:59:19.085Z,1492178359.085 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T13:59:19.085Z,1492178359.085 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:00:21.600Z,1492178421.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:00:22.396Z,1492178422.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:00:39.908Z,1492178439.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:00:40.648Z,1492178440.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:01:10.374Z,1492178470.374 [PNI_TCM](ERROR): CRC does not match. Expected:0x38554 got:0x14360
2017-04-14T14:01:11.973Z,1492178471.973 [PNI_TCM](ERROR): CRC does not match. Expected:0x64904 got:0x6977
2017-04-14T14:01:31.484Z,1492178491.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:01:32.281Z,1492178492.281 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:01:45.472Z,1492178505.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:01:46.268Z,1492178506.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:02:19.398Z,1492178539.398 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:02:19.398Z,1492178539.398 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:02:19.398Z,1492178539.398 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:02:19.446Z,1492178539.446 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:02:19.773Z,1492178539.773 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:02:19.773Z,1492178539.773 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:02:20.207Z,1492178540.207 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:02:20.208Z,1492178540.208 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:02:20.208Z,1492178540.208 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:02:24.957Z,1492178544.957 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:02:24.957Z,1492178544.957 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:02:24.957Z,1492178544.957 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:02:24.957Z,1492178544.957 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:02:25.349Z,1492178545.349 [Default:CheckIn:D] Stopped
2017-04-14T14:02:25.350Z,1492178545.349 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:02:25.844Z,1492178545.844 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 636.333854 min 
2017-04-14T14:02:25.844Z,1492178545.844 [Default:CheckIn:E] Stopped
2017-04-14T14:02:25.844Z,1492178545.844 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:02:25.844Z,1492178545.844 [Default:CheckIn] Stopped
2017-04-14T14:02:25.845Z,1492178545.845 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:02:25.845Z,1492178545.845 [Default:CheckIn](INFO): Running loop #93
2017-04-14T14:02:25.845Z,1492178545.845 [Default:CheckIn] Running Loop=93
2017-04-14T14:02:25.845Z,1492178545.845 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:02:25.845Z,1492178545.845 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:02:29.509Z,1492178549.509 [NAL9602](INFO): Powering up
2017-04-14T14:02:40.594Z,1492178560.594 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:02:40.677Z,1492178560.677 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:02:41.388Z,1492178561.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:02:51.145Z,1492178571.145 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:03:02.666Z,1492178582.667 [NAL9602](INFO): SBD MO Status=0, MOMSN=2185, MT Status=0, MTMSN=0
2017-04-14T14:03:02.667Z,1492178582.667 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:03:03.868Z,1492178583.868 [NAL9602](INFO): GPS fix at 20170414T140402: (36.802387, -121.787124)
2017-04-14T14:03:03.932Z,1492178583.932 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:03:03.932Z,1492178583.932 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:03:09.054Z,1492178589.054 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0376.lzma
2017-04-14T14:03:09.838Z,1492178589.838 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0376.lzma.bak
2017-04-14T14:03:09.839Z,1492178589.839 [DataOverHttps](INFO): SBD MOMSN=4886156
2017-04-14T14:03:14.479Z,1492178594.479 [NAL9602](INFO): Powering down
2017-04-14T14:03:20.800Z,1492178600.800 [DataOverHttps](INFO): Sending 134 bytes from file Logs/20170414T032153/Express0377.lzma
2017-04-14T14:03:21.590Z,1492178601.590 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0377.lzma.bak
2017-04-14T14:03:21.591Z,1492178601.591 [DataOverHttps](INFO): SBD MOMSN=4886159
2017-04-14T14:03:22.223Z,1492178602.223 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:03:22.223Z,1492178602.224 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:03:22.224Z,1492178602.224 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:03:46.038Z,1492178626.038 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:03:46.038Z,1492178626.038 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:03:46.038Z,1492178626.038 [BPC1](ERROR): Data Fault
2017-04-14T14:03:46.113Z,1492178626.113 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:03:47.312Z,1492178627.312 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:03:47.312Z,1492178627.312 [BPC1] No Fault, FailCount= 1
2017-04-14T14:03:50.512Z,1492178630.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:03:51.308Z,1492178631.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:05:15.145Z,1492178715.145 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:05:15.941Z,1492178715.941 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:05:20.528Z,1492178720.528 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:05:20.528Z,1492178720.528 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:05:20.528Z,1492178720.528 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:05:20.575Z,1492178720.575 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:05:20.961Z,1492178720.961 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:05:20.961Z,1492178720.961 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:05:21.341Z,1492178721.341 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:05:21.342Z,1492178721.342 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:05:21.342Z,1492178721.342 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:06:24.260Z,1492178784.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:06:25.056Z,1492178785.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:06:31.477Z,1492178791.477 [PNI_TCM](ERROR): CRC does not match. Expected:0x27561 got:0x49281
2017-04-14T14:07:34.924Z,1492178854.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:07:35.720Z,1492178855.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:07:44.333Z,1492178864.333 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:07:44.333Z,1492178864.333 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:07:44.333Z,1492178864.333 [BPC1](ERROR): Communications Fault
2017-04-14T14:07:44.384Z,1492178864.384 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:07:45.658Z,1492178865.658 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:07:45.658Z,1492178865.658 [BPC1] No Fault, FailCount= 1
2017-04-14T14:07:48.900Z,1492178868.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:07:49.696Z,1492178869.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:08:21.692Z,1492178901.692 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:08:21.692Z,1492178901.692 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:08:21.692Z,1492178901.692 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:08:21.775Z,1492178901.775 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:08:22.047Z,1492178902.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:08:22.047Z,1492178902.047 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:08:22.415Z,1492178902.415 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:08:22.415Z,1492178902.415 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:08:22.415Z,1492178902.415 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:08:22.826Z,1492178902.826 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:08:22.827Z,1492178902.827 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:08:22.827Z,1492178902.827 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:08:22.827Z,1492178902.827 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:08:23.178Z,1492178903.178 [Default:CheckIn:D] Stopped
2017-04-14T14:08:23.178Z,1492178903.178 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:08:27.886Z,1492178907.886 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 642.297656 min 
2017-04-14T14:08:27.886Z,1492178907.886 [Default:CheckIn:E] Stopped
2017-04-14T14:08:27.886Z,1492178907.886 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:08:27.886Z,1492178907.886 [Default:CheckIn] Stopped
2017-04-14T14:08:27.886Z,1492178907.886 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:08:27.887Z,1492178907.887 [Default:CheckIn](INFO): Running loop #94
2017-04-14T14:08:27.887Z,1492178907.887 [Default:CheckIn] Running Loop=94
2017-04-14T14:08:27.887Z,1492178907.887 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:08:27.887Z,1492178907.887 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:08:28.324Z,1492178908.324 [NAL9602](INFO): Powering up
2017-04-14T14:08:34.027Z,1492178914.027 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:08:34.028Z,1492178914.028 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:08:34.028Z,1492178914.028 [BPC1](ERROR): Data Fault
2017-04-14T14:08:34.194Z,1492178914.194 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:08:35.246Z,1492178915.246 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:08:35.246Z,1492178915.246 [BPC1] No Fault, FailCount= 1
2017-04-14T14:08:39.134Z,1492178919.134 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:08:44.284Z,1492178924.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:08:45.080Z,1492178925.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:09:03.142Z,1492178943.142 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:09:03.868Z,1492178943.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:09:17.126Z,1492178957.126 [NAL9602](INFO): SBD MO Status=2, MOMSN=2186, MT Status=2, MTMSN=0
2017-04-14T14:09:17.126Z,1492178957.126 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:09:27.195Z,1492178967.195 [PNI_TCM](ERROR): CRC does not match. Expected:0x23297 got:0x6336
2017-04-14T14:09:54.359Z,1492178994.359 [NAL9602](INFO): SBD MO Status=2, MOMSN=2186, MT Status=2, MTMSN=0
2017-04-14T14:09:54.360Z,1492178994.360 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:09:54.704Z,1492178994.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:09:55.500Z,1492178995.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:10:08.692Z,1492179008.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:10:09.488Z,1492179009.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:10:10.350Z,1492179010.350 [NAL9602](INFO): SBD MO Status=2, MOMSN=2186, MT Status=2, MTMSN=0
2017-04-14T14:10:10.350Z,1492179010.350 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:10:27.508Z,1492179027.508 [NAL9602](INFO): SBD MO Status=0, MOMSN=2186, MT Status=0, MTMSN=0
2017-04-14T14:10:27.508Z,1492179027.508 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:10:28.558Z,1492179028.557 [NAL9602](INFO): GPS fix at 20170414T141127: (36.802330, -121.787148)
2017-04-14T14:10:28.646Z,1492179028.646 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:10:28.646Z,1492179028.646 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:10:33.788Z,1492179033.788 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0380.lzma
2017-04-14T14:10:34.578Z,1492179034.579 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0380.lzma.bak
2017-04-14T14:10:34.579Z,1492179034.579 [DataOverHttps](INFO): SBD MOMSN=4886164
2017-04-14T14:10:38.947Z,1492179038.947 [NAL9602](INFO): Powering down
2017-04-14T14:10:44.738Z,1492179044.738 [DataOverHttps](INFO): Sending 135 bytes from file Logs/20170414T032153/Express0381.lzma
2017-04-14T14:10:45.534Z,1492179045.534 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0381.lzma.bak
2017-04-14T14:10:45.535Z,1492179045.535 [DataOverHttps](INFO): SBD MOMSN=4886167
2017-04-14T14:10:46.102Z,1492179046.102 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:10:46.103Z,1492179046.103 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:10:46.103Z,1492179046.103 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:11:17.824Z,1492179077.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:11:18.621Z,1492179078.621 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:11:22.574Z,1492179082.574 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:11:22.574Z,1492179082.574 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:11:22.574Z,1492179082.574 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:11:22.626Z,1492179082.626 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:11:23.047Z,1492179083.047 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:11:23.047Z,1492179083.047 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:11:23.485Z,1492179083.485 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:11:23.486Z,1492179083.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:11:23.486Z,1492179083.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:11:36.904Z,1492179096.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:11:37.656Z,1492179097.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:12:28.476Z,1492179148.476 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:12:29.272Z,1492179149.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:12:41.704Z,1492179161.704 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:12:42.500Z,1492179162.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:12:51.224Z,1492179171.224 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:13:11.956Z,1492179191.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:13:12.752Z,1492179192.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:13:38.090Z,1492179218.090 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:13:38.090Z,1492179218.090 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:13:38.090Z,1492179218.090 [BPC1](ERROR): Communications Fault
2017-04-14T14:13:38.145Z,1492179218.145 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:13:38.361Z,1492179218.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:13:39.156Z,1492179219.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:13:39.340Z,1492179219.341 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:13:39.343Z,1492179219.343 [BPC1] No Fault, FailCount= 1
2017-04-14T14:14:23.746Z,1492179263.746 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:14:23.746Z,1492179263.746 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:14:23.746Z,1492179263.746 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:14:23.777Z,1492179263.777 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:14:24.154Z,1492179264.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:14:24.154Z,1492179264.155 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:14:24.545Z,1492179264.545 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:14:24.545Z,1492179264.545 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:14:24.545Z,1492179264.545 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:14:48.256Z,1492179288.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:14:49.052Z,1492179289.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:15:02.241Z,1492179302.241 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:15:03.036Z,1492179303.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:15:46.533Z,1492179346.533 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:15:46.534Z,1492179346.534 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:15:46.534Z,1492179346.534 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:15:46.534Z,1492179346.534 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:15:46.889Z,1492179346.889 [Default:CheckIn:D] Stopped
2017-04-14T14:15:46.889Z,1492179346.889 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:15:47.390Z,1492179347.390 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 649.692839 min 
2017-04-14T14:15:47.391Z,1492179347.391 [Default:CheckIn:E] Stopped
2017-04-14T14:15:47.391Z,1492179347.391 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:15:47.392Z,1492179347.392 [Default:CheckIn] Stopped
2017-04-14T14:15:47.392Z,1492179347.392 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:15:47.393Z,1492179347.392 [Default:CheckIn](INFO): Running loop #95
2017-04-14T14:15:47.393Z,1492179347.393 [Default:CheckIn] Running Loop=95
2017-04-14T14:15:47.393Z,1492179347.393 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:15:47.393Z,1492179347.393 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:15:50.826Z,1492179350.826 [NAL9602](INFO): Powering up
2017-04-14T14:15:58.136Z,1492179358.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:15:58.932Z,1492179358.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:16:01.953Z,1492179361.953 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:16:06.835Z,1492179366.835 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:16:06.840Z,1492179366.840 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:16:06.840Z,1492179366.840 [BPC1](ERROR): Communications Fault
2017-04-14T14:16:06.942Z,1492179366.942 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:16:08.013Z,1492179368.013 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:16:08.013Z,1492179368.013 [BPC1] No Fault, FailCount= 1
2017-04-14T14:16:12.124Z,1492179372.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:16:12.920Z,1492179372.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:17:01.021Z,1492179421.021 [NAL9602](INFO): SBD MO Status=2, MOMSN=2187, MT Status=2, MTMSN=0
2017-04-14T14:17:01.021Z,1492179421.021 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:17:22.044Z,1492179442.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:17:22.840Z,1492179442.840 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:17:24.716Z,1492179444.716 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:17:24.716Z,1492179444.716 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T14:17:24.716Z,1492179444.716 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:17:24.730Z,1492179444.730 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:17:25.247Z,1492179445.247 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:17:25.248Z,1492179445.247 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T14:17:25.533Z,1492179445.533 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:17:25.533Z,1492179445.533 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:17:25.534Z,1492179445.534 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:17:33.062Z,1492179453.062 [NAL9602](INFO): SBD MO Status=2, MOMSN=2187, MT Status=2, MTMSN=0
2017-04-14T14:17:33.062Z,1492179453.062 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:18:09.954Z,1492179489.954 [NAL9602](INFO): SBD MO Status=2, MOMSN=2187, MT Status=2, MTMSN=0
2017-04-14T14:18:09.954Z,1492179489.954 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T14:18:21.947Z,1492179501.947 [NAL9602](INFO): SBD MO Status=0, MOMSN=2187, MT Status=0, MTMSN=0
2017-04-14T14:18:21.947Z,1492179501.947 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:18:23.152Z,1492179503.152 [NAL9602](INFO): GPS fix at 20170414T141923: (36.802371, -121.787190)
2017-04-14T14:18:23.294Z,1492179503.293 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:18:23.294Z,1492179503.293 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:18:29.700Z,1492179509.700 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0384.lzma
2017-04-14T14:18:29.705Z,1492179509.705 [NAL9602](INFO): Powering down
2017-04-14T14:18:30.483Z,1492179510.483 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0384.lzma.bak
2017-04-14T14:18:30.483Z,1492179510.483 [DataOverHttps](INFO): SBD MOMSN=4886175
2017-04-14T14:18:31.964Z,1492179511.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:18:32.760Z,1492179512.760 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:18:40.304Z,1492179520.304 [DataOverHttps](INFO): Sending 154 bytes from file Logs/20170414T032153/Express0385.lzma
2017-04-14T14:18:41.071Z,1492179521.070 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0385.lzma.bak
2017-04-14T14:18:41.071Z,1492179521.071 [DataOverHttps](INFO): SBD MOMSN=4886178
2017-04-14T14:18:41.573Z,1492179521.573 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:18:41.574Z,1492179521.574 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:18:41.574Z,1492179521.574 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:18:50.240Z,1492179530.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:18:50.965Z,1492179530.965 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:19:43.352Z,1492179583.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:19:44.149Z,1492179584.149 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:19:48.937Z,1492179588.937 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:19:48.937Z,1492179588.937 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:19:48.937Z,1492179588.937 [BPC1](ERROR): Data Fault
2017-04-14T14:19:48.968Z,1492179588.968 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:19:50.174Z,1492179590.174 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:19:50.174Z,1492179590.174 [BPC1] No Fault, FailCount= 1
2017-04-14T14:19:55.808Z,1492179595.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:19:56.606Z,1492179596.606 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:20:25.783Z,1492179625.783 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:20:25.791Z,1492179625.791 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:20:25.791Z,1492179625.791 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:20:25.830Z,1492179625.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:20:26.214Z,1492179626.214 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:20:26.214Z,1492179626.214 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:20:26.551Z,1492179626.551 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:20:26.576Z,1492179626.576 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:20:26.577Z,1492179626.577 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:21:03.715Z,1492179663.715 [PNI_TCM](ERROR): CRC does not match. Expected:0x16439 got:0x49281
2017-04-14T14:21:05.321Z,1492179665.321 [PNI_TCM](ERROR): CRC does not match. Expected:0x12249 got:0x9706
2017-04-14T14:21:05.660Z,1492179665.660 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:21:06.456Z,1492179666.456 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:21:23.992Z,1492179683.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:21:24.732Z,1492179684.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:22:15.552Z,1492179735.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:22:16.348Z,1492179736.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:22:29.548Z,1492179749.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:22:30.344Z,1492179750.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:22:51.582Z,1492179771.582 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:23:18.272Z,1492179798.272 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:23:18.272Z,1492179798.272 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:23:18.272Z,1492179798.272 [BPC1](ERROR): Communications Fault
2017-04-14T14:23:18.329Z,1492179798.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:23:19.504Z,1492179799.504 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:23:19.504Z,1492179799.504 [BPC1] No Fault, FailCount= 1
2017-04-14T14:23:24.656Z,1492179804.656 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:23:25.452Z,1492179805.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:23:26.700Z,1492179806.700 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:23:26.700Z,1492179806.700 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:23:26.700Z,1492179806.700 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:23:26.742Z,1492179806.742 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:23:27.113Z,1492179807.113 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:23:27.113Z,1492179807.113 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:23:27.502Z,1492179807.502 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:23:27.503Z,1492179807.503 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:23:27.503Z,1492179807.503 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:23:42.302Z,1492179822.302 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:23:42.302Z,1492179822.302 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:23:42.302Z,1492179822.302 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:23:42.302Z,1492179822.302 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:23:42.687Z,1492179822.687 [Default:CheckIn:D] Stopped
2017-04-14T14:23:42.687Z,1492179822.687 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:23:46.293Z,1492179826.293 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 657.622786 min 
2017-04-14T14:23:46.293Z,1492179826.293 [Default:CheckIn:E] Stopped
2017-04-14T14:23:46.293Z,1492179826.293 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:23:46.293Z,1492179826.293 [Default:CheckIn] Stopped
2017-04-14T14:23:46.293Z,1492179826.293 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:23:46.294Z,1492179826.294 [Default:CheckIn](INFO): Running loop #96
2017-04-14T14:23:46.294Z,1492179826.294 [Default:CheckIn] Running Loop=96
2017-04-14T14:23:46.294Z,1492179826.294 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:23:46.294Z,1492179826.294 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:23:46.736Z,1492179826.736 [NAL9602](INFO): Powering up
2017-04-14T14:23:57.956Z,1492179837.957 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:24:35.344Z,1492179875.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:24:36.140Z,1492179876.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:24:49.347Z,1492179889.347 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:24:50.144Z,1492179890.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:24:56.628Z,1492179896.628 [NAL9602](INFO): SBD MO Status=0, MOMSN=2188, MT Status=0, MTMSN=0
2017-04-14T14:24:56.629Z,1492179896.629 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:24:57.834Z,1492179897.834 [NAL9602](INFO): GPS fix at 20170414T142558: (36.802346, -121.787187)
2017-04-14T14:24:57.905Z,1492179897.905 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:24:57.905Z,1492179897.905 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:25:02.933Z,1492179902.933 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0388.lzma
2017-04-14T14:25:03.734Z,1492179903.734 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0388.lzma.bak
2017-04-14T14:25:03.735Z,1492179903.735 [DataOverHttps](INFO): SBD MOMSN=4886193
2017-04-14T14:25:09.544Z,1492179909.543 [NAL9602](INFO): Powering down
2017-04-14T14:25:17.268Z,1492179917.268 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0389.lzma
2017-04-14T14:25:18.423Z,1492179918.423 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0389.lzma.bak
2017-04-14T14:25:18.424Z,1492179918.424 [DataOverHttps](INFO): SBD MOMSN=4886196
2017-04-14T14:25:18.828Z,1492179918.828 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:25:18.828Z,1492179918.828 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:25:18.828Z,1492179918.828 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:25:59.246Z,1492179959.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:26:00.044Z,1492179960.044 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:26:30.158Z,1492179990.158 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:26:30.158Z,1492179990.158 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:26:30.158Z,1492179990.158 [BPC1](ERROR): Communications Fault
2017-04-14T14:26:30.368Z,1492179990.368 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:26:30.368Z,1492179990.368 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:26:30.368Z,1492179990.368 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:26:30.424Z,1492179990.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:26:30.425Z,1492179990.425 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:26:30.677Z,1492179990.677 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:26:30.678Z,1492179990.678 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:26:30.991Z,1492179990.991 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:26:31.007Z,1492179991.007 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:26:31.008Z,1492179991.008 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:26:31.484Z,1492179991.484 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:26:31.484Z,1492179991.484 [BPC1] No Fault, FailCount= 1
2017-04-14T14:26:42.748Z,1492180002.748 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:26:43.544Z,1492180003.544 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:27:12.882Z,1492180032.882 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:27:12.882Z,1492180032.882 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:27:12.882Z,1492180032.882 [BPC1](ERROR): Data Fault
2017-04-14T14:27:13.053Z,1492180033.053 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:27:14.292Z,1492180034.292 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:27:14.292Z,1492180034.292 [BPC1] No Fault, FailCount= 1
2017-04-14T14:27:25.668Z,1492180045.668 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T14:27:25.669Z,1492180045.668 [BPC1] Data Fault, FailCount= 2
2017-04-14T14:27:25.669Z,1492180045.669 [BPC1](ERROR): Data Fault
2017-04-14T14:27:25.781Z,1492180045.781 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:27:26.986Z,1492180046.986 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:27:26.986Z,1492180046.986 [BPC1] No Fault, FailCount= 2
2017-04-14T14:28:06.652Z,1492180086.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:28:07.448Z,1492180087.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:28:19.040Z,1492180099.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:28:19.836Z,1492180099.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:28:31.046Z,1492180111.046 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:28:31.046Z,1492180111.046 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:28:31.046Z,1492180111.046 [BPC1](ERROR): Communications Fault
2017-04-14T14:28:31.155Z,1492180111.155 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:28:32.157Z,1492180112.157 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:28:32.157Z,1492180112.158 [BPC1] No Fault, FailCount= 1
2017-04-14T14:28:32.988Z,1492180112.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:28:33.784Z,1492180113.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:29:28.920Z,1492180168.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:29:29.716Z,1492180169.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:29:31.263Z,1492180171.263 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:29:31.283Z,1492180171.283 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:29:31.283Z,1492180171.283 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:29:31.400Z,1492180171.400 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:29:31.582Z,1492180171.582 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:29:31.582Z,1492180171.582 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:29:31.935Z,1492180171.935 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:29:31.936Z,1492180171.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:29:31.936Z,1492180171.936 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:29:42.892Z,1492180182.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:29:43.688Z,1492180183.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:30:10.013Z,1492180210.013 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T14:30:10.013Z,1492180210.013 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:30:10.013Z,1492180210.013 [BPC1](ERROR): Data Fault
2017-04-14T14:30:10.122Z,1492180210.122 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:30:11.262Z,1492180211.261 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:30:11.262Z,1492180211.262 [BPC1] No Fault, FailCount= 1
2017-04-14T14:30:19.238Z,1492180219.238 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:30:19.238Z,1492180219.238 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:30:19.238Z,1492180219.238 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:30:19.238Z,1492180219.238 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:30:19.722Z,1492180219.722 [Default:CheckIn:D] Stopped
2017-04-14T14:30:19.722Z,1492180219.722 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:30:20.084Z,1492180220.084 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 664.240039 min 
2017-04-14T14:30:20.084Z,1492180220.084 [Default:CheckIn:E] Stopped
2017-04-14T14:30:20.084Z,1492180220.084 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:30:20.084Z,1492180220.084 [Default:CheckIn] Stopped
2017-04-14T14:30:20.084Z,1492180220.084 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:30:20.085Z,1492180220.085 [Default:CheckIn](INFO): Running loop #97
2017-04-14T14:30:20.085Z,1492180220.085 [Default:CheckIn] Running Loop=97
2017-04-14T14:30:20.085Z,1492180220.085 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:30:20.085Z,1492180220.085 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:30:27.224Z,1492180227.224 [NAL9602](INFO): Powering up
2017-04-14T14:30:38.305Z,1492180238.305 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:30:38.788Z,1492180238.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:30:39.608Z,1492180239.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:30:52.808Z,1492180252.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:30:53.604Z,1492180253.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:30:57.995Z,1492180257.995 [PNI_TCM](ERROR): CRC does not match. Expected:0x51532 got:0x33044
2017-04-14T14:31:36.224Z,1492180296.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:31:37.020Z,1492180297.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:02.672Z,1492180322.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:03.468Z,1492180323.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:09.428Z,1492180329.428 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T14:32:09.428Z,1492180329.428 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:32:09.428Z,1492180329.428 [BPC1](ERROR): Data Fault
2017-04-14T14:32:09.576Z,1492180329.576 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:32:10.574Z,1492180330.574 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:32:10.575Z,1492180330.575 [BPC1] No Fault, FailCount= 1
2017-04-14T14:32:31.193Z,1492180351.193 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:32:31.193Z,1492180351.193 [BPC1] Communications Fault, FailCount= 2
2017-04-14T14:32:31.193Z,1492180351.193 [BPC1](ERROR): Communications Fault
2017-04-14T14:32:31.323Z,1492180351.323 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:32:31.949Z,1492180351.949 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:32:31.949Z,1492180351.949 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T14:32:31.949Z,1492180351.949 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:32:32.027Z,1492180352.027 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:32:32.310Z,1492180352.310 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:32:32.310Z,1492180352.310 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T14:32:32.311Z,1492180352.311 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:32:32.311Z,1492180352.311 [BPC1] No Fault, FailCount= 2
2017-04-14T14:32:32.704Z,1492180352.704 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:32:32.705Z,1492180352.704 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:32:32.705Z,1492180352.705 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:32:46.200Z,1492180366.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:47.010Z,1492180367.010 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:47.804Z,1492180367.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:48.213Z,1492180368.213 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:49.008Z,1492180369.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:49.674Z,1492180369.674 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:32:51.941Z,1492180371.941 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:33:02.570Z,1492180382.570 [NAL9602](INFO): SBD MO Status=0, MOMSN=2189, MT Status=0, MTMSN=0
2017-04-14T14:33:02.570Z,1492180382.570 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:33:02.638Z,1492180382.638 [PNI_TCM](ERROR): CRC does not match. Expected:0x11717 got:0x36736
2017-04-14T14:33:03.746Z,1492180383.746 [NAL9602](INFO): GPS fix at 20170414T143404: (36.802387, -121.787134)
2017-04-14T14:33:03.918Z,1492180383.918 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:33:03.918Z,1492180383.918 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:33:12.566Z,1492180392.566 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:33:13.361Z,1492180393.361 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:33:19.095Z,1492180399.095 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:33:19.095Z,1492180399.095 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:33:19.095Z,1492180399.095 [BPC1](ERROR): Communications Fault
2017-04-14T14:33:19.313Z,1492180399.313 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:33:19.364Z,1492180399.364 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0392.lzma
2017-04-14T14:33:19.368Z,1492180399.368 [NAL9602](INFO): Powering down
2017-04-14T14:33:20.139Z,1492180400.139 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0392.lzma.bak
2017-04-14T14:33:20.139Z,1492180400.139 [DataOverHttps](INFO): SBD MOMSN=4886200
2017-04-14T14:33:20.294Z,1492180400.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:33:20.294Z,1492180400.294 [BPC1] No Fault, FailCount= 1
2017-04-14T14:33:38.542Z,1492180418.542 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:33:38.542Z,1492180418.542 [BPC1] Communications Fault, FailCount= 2
2017-04-14T14:33:38.543Z,1492180418.543 [BPC1](ERROR): Communications Fault
2017-04-14T14:33:38.653Z,1492180418.653 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:33:38.677Z,1492180418.677 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0393.lzma
2017-04-14T14:33:39.475Z,1492180419.475 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0393.lzma.bak
2017-04-14T14:33:39.475Z,1492180419.475 [DataOverHttps](INFO): SBD MOMSN=4886202
2017-04-14T14:33:39.674Z,1492180419.674 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:33:39.675Z,1492180419.675 [BPC1] No Fault, FailCount= 2
2017-04-14T14:33:40.248Z,1492180420.248 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:33:40.248Z,1492180420.248 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:33:40.248Z,1492180420.248 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:33:55.480Z,1492180435.480 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:33:55.481Z,1492180435.480 [BPC1] Communications Fault, FailCount= 3
2017-04-14T14:33:55.481Z,1492180435.481 [BPC1](ERROR): Communications Fault
2017-04-14T14:33:55.578Z,1492180435.578 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:33:56.036Z,1492180436.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:33:56.733Z,1492180436.733 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:33:56.734Z,1492180436.734 [BPC1] No Fault, FailCount= 3
2017-04-14T14:33:56.832Z,1492180436.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:34:21.709Z,1492180461.709 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:34:22.512Z,1492180462.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:34:36.438Z,1492180476.438 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:34:37.234Z,1492180477.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:35:32.320Z,1492180532.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:35:32.948Z,1492180532.948 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:35:32.948Z,1492180532.948 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:35:32.948Z,1492180532.948 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:35:32.961Z,1492180532.961 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:35:33.116Z,1492180533.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:35:33.486Z,1492180533.486 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:35:33.486Z,1492180533.486 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:35:33.773Z,1492180533.773 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:35:33.774Z,1492180533.774 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:35:33.774Z,1492180533.774 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:35:35.723Z,1492180535.723 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:35:35.723Z,1492180535.723 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:35:35.723Z,1492180535.723 [BPC1](ERROR): Data Fault
2017-04-14T14:35:35.814Z,1492180535.814 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:35:37.091Z,1492180537.092 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:35:37.092Z,1492180537.092 [BPC1] No Fault, FailCount= 1
2017-04-14T14:35:46.300Z,1492180546.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:35:47.096Z,1492180547.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:36:42.235Z,1492180602.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:36:43.028Z,1492180603.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:36:56.184Z,1492180616.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:36:56.982Z,1492180616.982 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:37:04.262Z,1492180624.262 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:37:04.263Z,1492180624.263 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:37:04.263Z,1492180624.263 [BPC1](ERROR): Communications Fault
2017-04-14T14:37:04.337Z,1492180624.337 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:37:05.521Z,1492180625.520 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:37:05.521Z,1492180625.521 [BPC1] No Fault, FailCount= 1
2017-04-14T14:38:06.096Z,1492180686.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:38:06.892Z,1492180686.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:38:33.898Z,1492180713.898 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:38:33.898Z,1492180713.898 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:38:33.898Z,1492180713.898 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:38:33.928Z,1492180713.928 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:38:34.313Z,1492180714.313 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:38:34.313Z,1492180714.313 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:38:34.695Z,1492180714.695 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:38:34.696Z,1492180714.696 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:38:34.696Z,1492180714.696 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:38:40.829Z,1492180720.829 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:38:40.829Z,1492180720.829 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:38:40.829Z,1492180720.829 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:38:40.829Z,1492180720.829 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:38:41.131Z,1492180721.131 [Default:CheckIn:D] Stopped
2017-04-14T14:38:41.131Z,1492180721.131 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:38:45.686Z,1492180725.686 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 672.596875 min 
2017-04-14T14:38:45.686Z,1492180725.686 [Default:CheckIn:E] Stopped
2017-04-14T14:38:45.686Z,1492180725.686 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:38:45.686Z,1492180725.686 [Default:CheckIn] Stopped
2017-04-14T14:38:45.686Z,1492180725.686 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:38:45.687Z,1492180725.687 [Default:CheckIn](INFO): Running loop #98
2017-04-14T14:38:45.687Z,1492180725.687 [Default:CheckIn] Running Loop=98
2017-04-14T14:38:45.687Z,1492180725.687 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:38:45.687Z,1492180725.687 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:38:46.137Z,1492180726.136 [NAL9602](INFO): Powering up
2017-04-14T14:38:57.329Z,1492180737.329 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:39:15.331Z,1492180755.331 [NAL9602](INFO): SBD MO Status=0, MOMSN=2190, MT Status=0, MTMSN=0
2017-04-14T14:39:15.331Z,1492180755.331 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:39:15.975Z,1492180755.975 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:39:16.772Z,1492180756.772 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:39:28.530Z,1492180768.530 [NAL9602](INFO): GPS fix at 20170414T144030: (36.802439, -121.787227)
2017-04-14T14:39:28.643Z,1492180768.643 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:39:28.643Z,1492180768.643 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:39:33.519Z,1492180773.519 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0396.lzma
2017-04-14T14:39:34.328Z,1492180774.328 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0396.lzma.bak
2017-04-14T14:39:34.328Z,1492180774.328 [DataOverHttps](INFO): SBD MOMSN=4886206
2017-04-14T14:39:38.736Z,1492180778.736 [NAL9602](INFO): Powering down
2017-04-14T14:39:44.204Z,1492180784.204 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0397.lzma
2017-04-14T14:39:44.966Z,1492180784.967 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0397.lzma.bak
2017-04-14T14:39:44.967Z,1492180784.967 [DataOverHttps](INFO): SBD MOMSN=4886209
2017-04-14T14:39:45.477Z,1492180785.477 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:39:45.477Z,1492180785.477 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:39:45.477Z,1492180785.477 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:40:25.852Z,1492180825.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:40:26.648Z,1492180826.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:41:21.953Z,1492180881.953 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:41:21.953Z,1492180881.953 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:41:21.953Z,1492180881.953 [BPC1](ERROR): Data Fault
2017-04-14T14:41:22.020Z,1492180882.020 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:41:23.190Z,1492180883.190 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:41:23.190Z,1492180883.190 [BPC1] No Fault, FailCount= 1
2017-04-14T14:41:34.779Z,1492180894.779 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:41:34.779Z,1492180894.779 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:41:34.779Z,1492180894.779 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:41:34.814Z,1492180894.814 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:41:35.179Z,1492180895.179 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:41:35.179Z,1492180895.179 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:41:35.572Z,1492180895.572 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:41:35.572Z,1492180895.572 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:41:35.572Z,1492180895.572 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:41:35.756Z,1492180895.756 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:41:36.554Z,1492180896.554 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:41:49.744Z,1492180909.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:41:50.540Z,1492180910.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:42:03.887Z,1492180923.886 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:42:03.887Z,1492180923.887 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:42:03.887Z,1492180923.887 [BPC1](ERROR): Data Fault
2017-04-14T14:42:03.941Z,1492180923.941 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:42:05.116Z,1492180925.115 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:42:05.116Z,1492180925.116 [BPC1] No Fault, FailCount= 1
2017-04-14T14:42:35.486Z,1492180955.486 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:42:35.486Z,1492180955.486 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:42:35.486Z,1492180955.486 [BPC1](ERROR): Communications Fault
2017-04-14T14:42:35.549Z,1492180955.549 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:42:36.717Z,1492180956.717 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:42:36.717Z,1492180956.717 [BPC1] No Fault, FailCount= 1
2017-04-14T14:42:45.644Z,1492180965.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:42:46.440Z,1492180966.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:42:51.978Z,1492180971.978 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:42:55.950Z,1492180975.950 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:42:55.950Z,1492180975.950 [BPC1] Communications Fault, FailCount= 2
2017-04-14T14:42:55.950Z,1492180975.950 [BPC1](ERROR): Communications Fault
2017-04-14T14:42:56.026Z,1492180976.026 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:42:57.220Z,1492180977.220 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:42:57.220Z,1492180977.220 [BPC1] No Fault, FailCount= 2
2017-04-14T14:43:55.540Z,1492181035.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:43:56.336Z,1492181036.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:44:35.623Z,1492181075.623 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:44:35.623Z,1492181075.623 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:44:35.623Z,1492181075.623 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:44:35.665Z,1492181075.665 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:44:36.080Z,1492181076.080 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:44:36.081Z,1492181076.081 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:44:36.429Z,1492181076.429 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:44:36.430Z,1492181076.430 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:44:36.430Z,1492181076.430 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:44:46.024Z,1492181086.024 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:44:46.024Z,1492181086.024 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:44:46.024Z,1492181086.024 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:44:46.024Z,1492181086.024 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:44:46.428Z,1492181086.428 [Default:CheckIn:D] Stopped
2017-04-14T14:44:46.428Z,1492181086.428 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:44:46.833Z,1492181086.833 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 678.685156 min 
2017-04-14T14:44:46.833Z,1492181086.833 [Default:CheckIn:E] Stopped
2017-04-14T14:44:46.833Z,1492181086.833 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:44:46.833Z,1492181086.833 [Default:CheckIn] Stopped
2017-04-14T14:44:46.833Z,1492181086.833 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:44:46.834Z,1492181086.834 [Default:CheckIn](INFO): Running loop #99
2017-04-14T14:44:46.834Z,1492181086.834 [Default:CheckIn] Running Loop=99
2017-04-14T14:44:46.834Z,1492181086.834 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:44:46.834Z,1492181086.834 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:44:50.542Z,1492181090.542 [NAL9602](INFO): Powering up
2017-04-14T14:45:01.709Z,1492181101.709 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:45:18.652Z,1492181118.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:45:19.448Z,1492181119.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:45:54.424Z,1492181154.424 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:45:54.424Z,1492181154.424 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:45:54.424Z,1492181154.424 [BPC1](ERROR): Communications Fault
2017-04-14T14:45:54.509Z,1492181154.509 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:45:55.466Z,1492181155.466 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:45:55.466Z,1492181155.466 [BPC1] No Fault, FailCount= 1
2017-04-14T14:46:02.906Z,1492181162.906 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:46:03.701Z,1492181163.701 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:46:04.180Z,1492181164.180 [PNI_TCM](ERROR): CRC does not match. Expected:0x18951 got:0x59940
2017-04-14T14:46:12.582Z,1492181172.582 [PNI_TCM](ERROR): CRC does not match. Expected:0x21457 got:0x33112
2017-04-14T14:46:15.371Z,1492181175.371 [PNI_TCM](ERROR): CRC does not match. Expected:0x32708 got:0x5383
2017-04-14T14:46:18.154Z,1492181178.154 [PNI_TCM](ERROR): CRC does not match. Expected:0x44731 got:0x3734
2017-04-14T14:46:18.561Z,1492181178.561 [PNI_TCM](ERROR): CRC does not match. Expected:0x46939 got:0x49445
2017-04-14T14:46:29.308Z,1492181189.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:46:30.104Z,1492181190.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:46:50.993Z,1492181210.993 [NAL9602](INFO): SBD MO Status=0, MOMSN=2191, MT Status=0, MTMSN=0
2017-04-14T14:46:50.993Z,1492181210.993 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:46:52.042Z,1492181212.042 [NAL9602](INFO): GPS fix at 20170414T144754: (36.802379, -121.787145)
2017-04-14T14:46:52.226Z,1492181212.226 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:46:52.226Z,1492181212.226 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:46:58.029Z,1492181218.029 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0400.lzma
2017-04-14T14:46:58.827Z,1492181218.827 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0400.lzma.bak
2017-04-14T14:46:58.827Z,1492181218.827 [DataOverHttps](INFO): SBD MOMSN=4886213
2017-04-14T14:47:03.496Z,1492181223.496 [NAL9602](INFO): Powering down
2017-04-14T14:47:11.444Z,1492181231.444 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0401.lzma
2017-04-14T14:47:12.231Z,1492181232.231 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0401.lzma.bak
2017-04-14T14:47:12.231Z,1492181232.231 [DataOverHttps](INFO): SBD MOMSN=4886216
2017-04-14T14:47:12.724Z,1492181232.724 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:47:12.724Z,1492181232.724 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:47:12.724Z,1492181232.724 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:47:36.448Z,1492181256.448 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:47:36.448Z,1492181256.448 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:47:36.449Z,1492181256.448 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:47:36.475Z,1492181256.474 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:47:36.890Z,1492181256.890 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:47:36.890Z,1492181256.890 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:47:37.249Z,1492181257.249 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:47:37.249Z,1492181257.249 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:47:37.250Z,1492181257.250 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:47:38.422Z,1492181258.422 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:47:39.216Z,1492181259.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:47:52.418Z,1492181272.418 [PNI_TCM](ERROR): CRC does not match. Expected:0x8212 got:0x54417
2017-04-14T14:47:57.226Z,1492181277.226 [PNI_TCM](ERROR): CRC does not match. Expected:0x45926 got:0x9500
2017-04-14T14:48:22.684Z,1492181302.684 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:48:23.480Z,1492181303.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:48:49.120Z,1492181329.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:48:49.916Z,1492181329.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:49:03.064Z,1492181343.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:49:03.864Z,1492181343.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:49:18.561Z,1492181358.561 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:49:18.561Z,1492181358.561 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:49:18.561Z,1492181358.561 [BPC1](ERROR): Communications Fault
2017-04-14T14:49:18.638Z,1492181358.638 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:49:19.810Z,1492181359.810 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:49:19.810Z,1492181359.810 [BPC1] No Fault, FailCount= 1
2017-04-14T14:49:58.252Z,1492181398.252 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:49:59.052Z,1492181399.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:50:32.401Z,1492181432.401 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T14:50:32.401Z,1492181432.401 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:50:32.401Z,1492181432.401 [BPC1](ERROR): Data Fault
2017-04-14T14:50:32.464Z,1492181432.464 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:50:33.740Z,1492181433.740 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:50:33.740Z,1492181433.740 [BPC1] No Fault, FailCount= 1
2017-04-14T14:50:37.713Z,1492181437.713 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:50:37.713Z,1492181437.713 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:50:37.713Z,1492181437.713 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:50:37.768Z,1492181437.768 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:50:38.046Z,1492181438.046 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:50:38.046Z,1492181438.046 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:50:38.418Z,1492181438.418 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:50:38.418Z,1492181438.418 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:50:38.418Z,1492181438.418 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:51:08.090Z,1492181468.090 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:51:08.884Z,1492181468.884 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:51:25.665Z,1492181485.665 [PNI_TCM](ERROR): CRC does not match. Expected:0x4395 got:0x6336
2017-04-14T14:52:13.297Z,1492181533.297 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:52:13.297Z,1492181533.297 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:52:13.297Z,1492181533.297 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:52:13.297Z,1492181533.297 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:52:13.696Z,1492181533.696 [Default:CheckIn:D] Stopped
2017-04-14T14:52:13.696Z,1492181533.696 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:52:14.100Z,1492181534.100 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 686.139648 min 
2017-04-14T14:52:14.100Z,1492181534.100 [Default:CheckIn:E] Stopped
2017-04-14T14:52:14.100Z,1492181534.100 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:52:14.100Z,1492181534.100 [Default:CheckIn] Stopped
2017-04-14T14:52:14.100Z,1492181534.100 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:52:14.101Z,1492181534.101 [Default:CheckIn](INFO): Running loop #100
2017-04-14T14:52:14.101Z,1492181534.101 [Default:CheckIn] Running Loop=100
2017-04-14T14:52:14.101Z,1492181534.101 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:52:14.101Z,1492181534.101 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:52:18.135Z,1492181538.135 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:52:18.135Z,1492181538.135 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:52:18.135Z,1492181538.135 [BPC1](ERROR): Communications Fault
2017-04-14T14:52:18.226Z,1492181538.226 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:52:18.285Z,1492181538.285 [NAL9602](INFO): Powering up
2017-04-14T14:52:19.197Z,1492181539.197 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:52:19.198Z,1492181539.198 [BPC1] No Fault, FailCount= 1
2017-04-14T14:52:29.465Z,1492181549.465 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:52:32.732Z,1492181552.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:52:33.528Z,1492181553.528 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:52:51.060Z,1492181571.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:52:51.086Z,1492181571.086 [NAL9602](INFO): SBD MO Status=0, MOMSN=2192, MT Status=0, MTMSN=0
2017-04-14T14:52:51.086Z,1492181571.086 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:52:51.788Z,1492181571.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:52:52.380Z,1492181572.379 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T14:52:57.477Z,1492181577.477 [NAL9602](INFO): GPS fix at 20170414T145400: (36.802354, -121.787131)
2017-04-14T14:52:57.564Z,1492181577.564 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:52:57.564Z,1492181577.564 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:53:02.416Z,1492181582.416 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0404.lzma
2017-04-14T14:53:03.206Z,1492181583.207 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0404.lzma.bak
2017-04-14T14:53:03.207Z,1492181583.207 [DataOverHttps](INFO): SBD MOMSN=4886234
2017-04-14T14:53:07.502Z,1492181587.502 [NAL9602](INFO): Powering down
2017-04-14T14:53:12.755Z,1492181592.755 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0405.lzma
2017-04-14T14:53:13.543Z,1492181593.543 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0405.lzma.bak
2017-04-14T14:53:13.543Z,1492181593.543 [DataOverHttps](INFO): SBD MOMSN=4886237
2017-04-14T14:53:14.046Z,1492181594.046 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T14:53:14.046Z,1492181594.046 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T14:53:14.046Z,1492181594.046 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T14:53:38.664Z,1492181618.664 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:53:38.665Z,1492181618.665 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T14:53:38.665Z,1492181618.665 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:53:38.678Z,1492181618.678 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:53:39.118Z,1492181619.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:53:39.118Z,1492181619.118 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T14:53:39.477Z,1492181619.477 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:53:39.477Z,1492181619.477 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:53:39.478Z,1492181619.478 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:53:41.832Z,1492181621.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:53:42.629Z,1492181622.629 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:53:55.062Z,1492181635.062 [PNI_TCM](ERROR): CRC does not match. Expected:0x53539 got:0x33027
2017-04-14T14:53:58.261Z,1492181638.261 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-04-14T14:54:06.245Z,1492181646.245 [PNI_TCM](ERROR): CRC does not match. Expected:0x34957 got:0x33064
2017-04-14T14:54:12.660Z,1492181652.659 [BPC1](ERROR): Failed to parse message.
2017-04-14T14:54:12.660Z,1492181652.660 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T14:54:12.660Z,1492181652.660 [BPC1] Data Fault, FailCount= 1
2017-04-14T14:54:12.660Z,1492181652.660 [BPC1](ERROR): Data Fault
2017-04-14T14:54:12.690Z,1492181652.690 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T14:54:13.891Z,1492181653.891 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:54:13.891Z,1492181653.891 [BPC1] No Fault, FailCount= 1
2017-04-14T14:54:48.365Z,1492181688.365 [BPC1](ERROR): Failed to receive battery data
2017-04-14T14:54:48.365Z,1492181688.365 [BPC1] Communications Fault, FailCount= 1
2017-04-14T14:54:48.365Z,1492181688.365 [BPC1](ERROR): Communications Fault
2017-04-14T14:54:48.433Z,1492181688.432 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T14:54:49.682Z,1492181689.681 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T14:54:49.682Z,1492181689.682 [BPC1] No Fault, FailCount= 1
2017-04-14T14:54:52.524Z,1492181692.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:54:53.320Z,1492181693.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:55:44.082Z,1492181744.082 [PNI_TCM](ERROR): CRC does not match. Expected:0x4114 got:0x49281
2017-04-14T14:56:39.651Z,1492181799.651 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:56:39.651Z,1492181799.651 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T14:56:39.651Z,1492181799.651 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:56:39.697Z,1492181799.697 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:56:40.016Z,1492181800.016 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:56:40.016Z,1492181800.016 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T14:56:40.316Z,1492181800.316 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:56:40.316Z,1492181800.316 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:56:40.317Z,1492181800.317 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:57:11.524Z,1492181831.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:57:12.322Z,1492181832.322 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:58:14.786Z,1492181894.786 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T14:58:14.786Z,1492181894.786 [Default:CheckIn:C.Wait] Stopped
2017-04-14T14:58:14.786Z,1492181894.786 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T14:58:14.787Z,1492181894.787 [Default:CheckIn:D] Running Loop=1
2017-04-14T14:58:15.165Z,1492181895.165 [Default:CheckIn:D] Stopped
2017-04-14T14:58:15.165Z,1492181895.165 [Default:CheckIn:E] Running Loop=1
2017-04-14T14:58:19.995Z,1492181899.995 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 692.164128 min 
2017-04-14T14:58:19.995Z,1492181899.995 [Default:CheckIn:E] Stopped
2017-04-14T14:58:19.995Z,1492181899.995 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T14:58:19.995Z,1492181899.995 [Default:CheckIn] Stopped
2017-04-14T14:58:19.995Z,1492181899.995 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T14:58:19.996Z,1492181899.996 [Default:CheckIn](INFO): Running loop #101
2017-04-14T14:58:19.996Z,1492181899.996 [Default:CheckIn] Running Loop=101
2017-04-14T14:58:19.996Z,1492181899.996 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T14:58:19.996Z,1492181899.996 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T14:58:20.448Z,1492181900.448 [NAL9602](INFO): Powering up
2017-04-14T14:58:31.257Z,1492181911.257 [NAL9602](INFO): NAL9602 initialized
2017-04-14T14:58:36.184Z,1492181916.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:58:36.980Z,1492181916.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:59:32.084Z,1492181972.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:59:32.881Z,1492181972.881 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:59:40.370Z,1492181980.370 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T14:59:40.370Z,1492181980.370 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T14:59:40.370Z,1492181980.370 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T14:59:40.384Z,1492181980.384 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T14:59:40.886Z,1492181980.886 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T14:59:40.886Z,1492181980.886 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T14:59:41.152Z,1492181981.151 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T14:59:41.152Z,1492181981.152 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T14:59:41.152Z,1492181981.152 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T14:59:46.068Z,1492181986.069 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:59:46.864Z,1492181986.864 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T14:59:47.494Z,1492181987.494 [NAL9602](INFO): SBD MO Status=0, MOMSN=2193, MT Status=0, MTMSN=0
2017-04-14T14:59:47.494Z,1492181987.494 [NAL9602](INFO): No messages in MT queue
2017-04-14T14:59:48.692Z,1492181988.692 [NAL9602](INFO): GPS fix at 20170414T150052: (36.802348, -121.787129)
2017-04-14T14:59:48.775Z,1492181988.775 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T14:59:48.775Z,1492181988.775 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T14:59:53.744Z,1492181993.744 [DataOverHttps](INFO): Sending 78 bytes from file Logs/20170414T032153/Courier0408.lzma
2017-04-14T14:59:54.527Z,1492181994.527 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0408.lzma.bak
2017-04-14T14:59:54.527Z,1492181994.527 [DataOverHttps](INFO): SBD MOMSN=4886243
2017-04-14T14:59:58.952Z,1492181998.952 [NAL9602](INFO): Powering down
2017-04-14T15:00:05.660Z,1492182005.660 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0409.lzma
2017-04-14T15:00:06.443Z,1492182006.443 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0409.lzma.bak
2017-04-14T15:00:06.443Z,1492182006.443 [DataOverHttps](INFO): SBD MOMSN=4886246
2017-04-14T15:00:06.950Z,1492182006.950 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:00:06.950Z,1492182006.950 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:00:06.950Z,1492182006.950 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:00:56.007Z,1492182056.007 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:00:56.804Z,1492182056.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:01:57.205Z,1492182117.205 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:01:57.205Z,1492182117.205 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:01:57.205Z,1492182117.205 [BPC1](ERROR): Communications Fault
2017-04-14T15:01:57.258Z,1492182117.258 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:01:58.433Z,1492182118.433 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:01:58.433Z,1492182118.433 [BPC1] No Fault, FailCount= 1
2017-04-14T15:02:05.844Z,1492182125.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:02:06.640Z,1492182126.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:02:19.858Z,1492182139.858 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:02:20.652Z,1492182140.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:02:41.195Z,1492182161.195 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:02:41.195Z,1492182161.195 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:02:41.196Z,1492182161.195 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:02:41.234Z,1492182161.234 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:02:41.630Z,1492182161.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:02:41.630Z,1492182161.630 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:02:42.019Z,1492182162.019 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:02:42.032Z,1492182162.032 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:02:42.032Z,1492182162.032 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:02:52.388Z,1492182172.388 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:03:15.000Z,1492182195.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:03:15.796Z,1492182195.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:03:29.757Z,1492182209.757 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:03:30.553Z,1492182210.553 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:04:24.896Z,1492182264.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:04:25.692Z,1492182265.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:05:07.654Z,1492182307.654 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:05:07.654Z,1492182307.654 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:05:07.654Z,1492182307.654 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:05:07.654Z,1492182307.654 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:05:08.055Z,1492182308.055 [Default:CheckIn:D] Stopped
2017-04-14T15:05:08.055Z,1492182308.055 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:05:08.446Z,1492182308.446 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 699.045508 min 
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn:E] Stopped
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn] Stopped
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn](INFO): Running loop #102
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn] Running Loop=102
2017-04-14T15:05:08.447Z,1492182308.447 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:05:08.448Z,1492182308.448 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:05:11.993Z,1492182311.993 [NAL9602](INFO): Powering up
2017-04-14T15:05:21.997Z,1492182321.997 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T15:05:23.161Z,1492182323.161 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:05:39.194Z,1492182339.194 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:05:39.194Z,1492182339.194 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:05:39.194Z,1492182339.194 [BPC1](ERROR): Data Fault
2017-04-14T15:05:39.261Z,1492182339.261 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:05:40.423Z,1492182340.423 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:05:40.423Z,1492182340.423 [BPC1] No Fault, FailCount= 1
2017-04-14T15:05:42.411Z,1492182342.411 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:05:42.411Z,1492182342.411 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:05:42.411Z,1492182342.411 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:05:42.425Z,1492182342.425 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:05:42.770Z,1492182342.770 [NAL9602](INFO): SBD MO Status=0, MOMSN=2194, MT Status=0, MTMSN=0
2017-04-14T15:05:42.770Z,1492182342.770 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:05:42.868Z,1492182342.868 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:05:42.868Z,1492182342.868 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:05:43.221Z,1492182343.221 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:05:43.221Z,1492182343.221 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:05:43.222Z,1492182343.222 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:05:50.375Z,1492182350.375 [NAL9602](INFO): GPS fix at 20170414T150654: (36.802362, -121.787128)
2017-04-14T15:05:50.437Z,1492182350.437 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:05:50.437Z,1492182350.437 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:05:56.812Z,1492182356.812 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0412.lzma
2017-04-14T15:05:57.684Z,1492182357.684 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0412.lzma.bak
2017-04-14T15:05:57.684Z,1492182357.684 [DataOverHttps](INFO): SBD MOMSN=4886251
2017-04-14T15:06:01.833Z,1492182361.833 [NAL9602](INFO): Powering down
2017-04-14T15:06:07.094Z,1492182367.095 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0413.lzma
2017-04-14T15:06:07.832Z,1492182367.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:06:07.851Z,1492182367.851 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0413.lzma.bak
2017-04-14T15:06:07.851Z,1492182367.851 [DataOverHttps](INFO): SBD MOMSN=4886254
2017-04-14T15:06:08.350Z,1492182368.350 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:06:08.350Z,1492182368.350 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:06:08.350Z,1492182368.350 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:06:08.576Z,1492182368.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:06:16.822Z,1492182376.822 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:06:16.822Z,1492182376.822 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:06:16.822Z,1492182376.822 [BPC1](ERROR): Communications Fault
2017-04-14T15:06:16.935Z,1492182376.935 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:06:18.082Z,1492182378.082 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:06:18.082Z,1492182378.082 [BPC1] No Fault, FailCount= 1
2017-04-14T15:06:58.652Z,1492182418.652 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:06:59.448Z,1492182419.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:07:25.314Z,1492182445.314 [BPC1](ERROR): Failed to parse message.
2017-04-14T15:07:25.314Z,1492182445.314 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:07:25.314Z,1492182445.314 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:07:25.314Z,1492182445.314 [BPC1](ERROR): Data Fault
2017-04-14T15:07:25.419Z,1492182445.419 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:07:26.581Z,1492182446.581 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:07:26.581Z,1492182446.581 [BPC1] No Fault, FailCount= 1
2017-04-14T15:08:07.740Z,1492182487.740 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:08:07.740Z,1492182487.740 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:08:07.741Z,1492182487.741 [BPC1](ERROR): Data Fault
2017-04-14T15:08:07.813Z,1492182487.813 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:08:08.500Z,1492182488.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:08:08.966Z,1492182488.966 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:08:08.966Z,1492182488.966 [BPC1] No Fault, FailCount= 1
2017-04-14T15:08:09.296Z,1492182489.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:08:22.572Z,1492182502.572 [BPC1](ERROR): Failed to parse message.
2017-04-14T15:08:22.572Z,1492182502.572 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:08:22.572Z,1492182502.572 [BPC1] Data Fault, FailCount= 2
2017-04-14T15:08:22.572Z,1492182502.572 [BPC1](ERROR): Data Fault
2017-04-14T15:08:22.668Z,1492182502.668 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:08:23.861Z,1492182503.861 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:08:23.861Z,1492182503.861 [BPC1] No Fault, FailCount= 2
2017-04-14T15:08:39.780Z,1492182519.780 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:08:39.780Z,1492182519.780 [BPC1] Communications Fault, FailCount= 3
2017-04-14T15:08:39.780Z,1492182519.780 [BPC1](ERROR): Communications Fault
2017-04-14T15:08:39.840Z,1492182519.840 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:08:41.010Z,1492182521.010 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:08:41.010Z,1492182521.010 [BPC1] No Fault, FailCount= 3
2017-04-14T15:08:43.389Z,1492182523.388 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:08:43.389Z,1492182523.389 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:08:43.389Z,1492182523.389 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:08:43.402Z,1492182523.402 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:08:43.806Z,1492182523.806 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:08:43.806Z,1492182523.806 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:08:44.200Z,1492182524.200 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:08:44.201Z,1492182524.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:08:44.201Z,1492182524.201 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:09:18.055Z,1492182558.055 [PNI_TCM](ERROR): CRC does not match. Expected:0x7686 got:0x63917
2017-04-14T15:09:18.408Z,1492182558.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:09:19.204Z,1492182559.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:09:30.027Z,1492182570.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x1258 got:0x4123
2017-04-14T15:10:29.080Z,1492182629.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:10:29.876Z,1492182629.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:10:43.052Z,1492182643.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:10:43.848Z,1492182643.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:10:55.262Z,1492182655.262 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:10:55.262Z,1492182655.262 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:10:55.262Z,1492182655.262 [BPC1](ERROR): Data Fault
2017-04-14T15:10:55.317Z,1492182655.317 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:10:56.492Z,1492182656.492 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:10:56.492Z,1492182656.492 [BPC1] No Fault, FailCount= 1
2017-04-14T15:11:07.725Z,1492182667.725 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:11:07.725Z,1492182667.725 [BPC1] Data Fault, FailCount= 2
2017-04-14T15:11:07.725Z,1492182667.725 [BPC1](ERROR): Data Fault
2017-04-14T15:11:07.890Z,1492182667.889 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:11:08.876Z,1492182668.876 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:11:08.876Z,1492182668.876 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:11:08.876Z,1492182668.876 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:11:08.876Z,1492182668.876 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:11:08.924Z,1492182668.924 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:11:08.924Z,1492182668.924 [BPC1] No Fault, FailCount= 2
2017-04-14T15:11:09.332Z,1492182669.332 [Default:CheckIn:D] Stopped
2017-04-14T15:11:09.332Z,1492182669.332 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:11:12.783Z,1492182672.783 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 705.066862 min 
2017-04-14T15:11:12.783Z,1492182672.783 [Default:CheckIn:E] Stopped
2017-04-14T15:11:12.783Z,1492182672.783 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:11:12.783Z,1492182672.783 [Default:CheckIn] Stopped
2017-04-14T15:11:12.784Z,1492182672.783 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:11:12.784Z,1492182672.784 [Default:CheckIn](INFO): Running loop #103
2017-04-14T15:11:12.784Z,1492182672.784 [Default:CheckIn] Running Loop=103
2017-04-14T15:11:12.784Z,1492182672.784 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:11:12.784Z,1492182672.784 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:11:13.244Z,1492182673.244 [NAL9602](INFO): Powering up
2017-04-14T15:11:24.061Z,1492182684.061 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:11:38.972Z,1492182698.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:11:39.768Z,1492182699.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:11:41.246Z,1492182701.246 [NAL9602](INFO): SBD MO Status=0, MOMSN=2195, MT Status=0, MTMSN=0
2017-04-14T15:11:41.246Z,1492182701.246 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:11:42.167Z,1492182702.167 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:11:42.168Z,1492182702.168 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:11:42.168Z,1492182702.168 [BPC1](ERROR): Communications Fault
2017-04-14T15:11:42.259Z,1492182702.259 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:11:43.326Z,1492182703.326 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:11:43.326Z,1492182703.326 [BPC1] No Fault, FailCount= 1
2017-04-14T15:11:44.535Z,1492182704.535 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:11:44.535Z,1492182704.535 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:11:44.535Z,1492182704.535 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:11:44.591Z,1492182704.592 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:11:44.948Z,1492182704.948 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:11:44.948Z,1492182704.948 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:11:45.320Z,1492182705.320 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:11:45.320Z,1492182705.320 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:11:45.321Z,1492182705.321 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:11:51.657Z,1492182711.657 [NAL9602](INFO): GPS fix at 20170414T151256: (36.802378, -121.787158)
2017-04-14T15:11:51.858Z,1492182711.858 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:11:51.858Z,1492182711.858 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:11:52.174Z,1492182712.174 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:11:52.968Z,1492182712.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:11:57.756Z,1492182717.756 [DataOverHttps](INFO): Sending 61 bytes from file Logs/20170414T032153/Courier0416.lzma
2017-04-14T15:11:58.543Z,1492182718.543 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0416.lzma.bak
2017-04-14T15:11:58.543Z,1492182718.543 [DataOverHttps](INFO): SBD MOMSN=4886259
2017-04-14T15:12:02.768Z,1492182722.768 [NAL9602](INFO): Powering down
2017-04-14T15:12:02.797Z,1492182722.797 [PNI_TCM](ERROR): CRC does not match. Expected:0x27317 got:0x49445
2017-04-14T15:12:02.797Z,1492182722.797 [PNI_TCM](ERROR): CRC does not match. Expected:0x21753 got:0x49445
2017-04-14T15:12:02.798Z,1492182722.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x38545 got:0x49445
2017-04-14T15:12:02.798Z,1492182722.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x34950 got:0x49445
2017-04-14T15:12:02.799Z,1492182722.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x43832 got:0x49445
2017-04-14T15:12:02.799Z,1492182722.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x19501 got:0x49445
2017-04-14T15:12:02.799Z,1492182722.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x18343 got:0x49445
2017-04-14T15:12:02.800Z,1492182722.800 [PNI_TCM](ERROR): CRC does not match. Expected:0x61342 got:0x49445
2017-04-14T15:12:08.167Z,1492182728.167 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0417.lzma
2017-04-14T15:12:08.978Z,1492182728.978 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0417.lzma.bak
2017-04-14T15:12:08.978Z,1492182728.978 [DataOverHttps](INFO): SBD MOMSN=4886262
2017-04-14T15:12:09.462Z,1492182729.462 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:12:09.462Z,1492182729.462 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:12:09.462Z,1492182729.462 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:12:38.123Z,1492182758.123 [PNI_TCM](ERROR): CRC does not match. Expected:0x5093 got:0x49152
2017-04-14T15:12:52.557Z,1492182772.557 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:13:02.824Z,1492182782.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:13:03.620Z,1492182783.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:13:09.709Z,1492182789.709 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:13:09.709Z,1492182789.709 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:13:09.709Z,1492182789.709 [BPC1](ERROR): Data Fault
2017-04-14T15:13:09.776Z,1492182789.776 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:13:13.779Z,1492182793.779 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:13:13.779Z,1492182793.779 [BPC1] No Fault, FailCount= 1
2017-04-14T15:14:12.724Z,1492182852.724 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:14:13.520Z,1492182853.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:14:45.711Z,1492182885.711 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:14:45.711Z,1492182885.711 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:14:45.711Z,1492182885.711 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:14:45.744Z,1492182885.744 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:14:46.104Z,1492182886.104 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:14:46.105Z,1492182886.105 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:14:46.471Z,1492182886.471 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:14:46.471Z,1492182886.471 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:14:46.472Z,1492182886.472 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:15:21.824Z,1492182921.824 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:15:22.622Z,1492182922.622 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:16:00.654Z,1492182960.654 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:16:00.654Z,1492182960.654 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:16:00.654Z,1492182960.654 [BPC1](ERROR): Communications Fault
2017-04-14T15:16:00.715Z,1492182960.715 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:16:01.909Z,1492182961.909 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:16:01.909Z,1492182961.909 [BPC1] No Fault, FailCount= 1
2017-04-14T15:17:10.231Z,1492183030.231 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:17:10.232Z,1492183030.232 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:17:10.232Z,1492183030.232 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:17:10.232Z,1492183030.232 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:17:10.577Z,1492183030.577 [Default:CheckIn:D] Stopped
2017-04-14T15:17:10.577Z,1492183030.577 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:17:11.045Z,1492183031.045 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 711.087630 min 
2017-04-14T15:17:11.045Z,1492183031.045 [Default:CheckIn:E] Stopped
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn] Stopped
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn](INFO): Running loop #104
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn] Running Loop=104
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:17:11.046Z,1492183031.046 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:17:16.071Z,1492183036.071 [NAL9602](INFO): Powering up
2017-04-14T15:17:26.973Z,1492183046.973 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:17:42.582Z,1492183062.582 [NAL9602](INFO): SBD MO Status=0, MOMSN=2196, MT Status=0, MTMSN=0
2017-04-14T15:17:42.582Z,1492183062.582 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:17:46.656Z,1492183066.656 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:17:46.656Z,1492183066.656 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:17:46.656Z,1492183066.657 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:17:46.691Z,1492183066.691 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:17:47.197Z,1492183067.197 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:17:47.197Z,1492183067.197 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:17:47.487Z,1492183067.487 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:17:47.491Z,1492183067.491 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:17:47.492Z,1492183067.492 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:17:55.776Z,1492183075.776 [NAL9602](INFO): GPS fix at 20170414T151900: (36.802385, -121.787100)
2017-04-14T15:17:55.885Z,1492183075.885 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:17:55.885Z,1492183075.885 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:17:56.380Z,1492183076.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:17:57.176Z,1492183077.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:18:01.836Z,1492183081.836 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0420.lzma
2017-04-14T15:18:02.627Z,1492183082.627 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0420.lzma.bak
2017-04-14T15:18:02.627Z,1492183082.627 [DataOverHttps](INFO): SBD MOMSN=4886266
2017-04-14T15:18:06.906Z,1492183086.907 [NAL9602](INFO): Powering down
2017-04-14T15:18:12.346Z,1492183092.346 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0421.lzma
2017-04-14T15:18:13.095Z,1492183093.095 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0421.lzma.bak
2017-04-14T15:18:13.095Z,1492183093.095 [DataOverHttps](INFO): SBD MOMSN=4886269
2017-04-14T15:18:13.638Z,1492183093.638 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:18:13.638Z,1492183093.638 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:18:13.638Z,1492183093.638 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:19:06.256Z,1492183146.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:19:07.052Z,1492183147.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:19:49.776Z,1492183189.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:19:50.572Z,1492183190.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:20:16.172Z,1492183216.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:20:16.968Z,1492183216.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:20:47.837Z,1492183247.837 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:20:47.837Z,1492183247.837 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:20:47.837Z,1492183247.837 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:20:47.900Z,1492183247.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:20:48.332Z,1492183248.332 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:20:48.332Z,1492183248.332 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:20:48.769Z,1492183248.769 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:20:48.770Z,1492183248.770 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:20:48.788Z,1492183248.788 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:21:18.075Z,1492183278.075 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:21:18.075Z,1492183278.075 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:21:18.075Z,1492183278.075 [BPC1](ERROR): Communications Fault
2017-04-14T15:21:18.171Z,1492183278.171 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:21:19.085Z,1492183279.085 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:21:19.085Z,1492183279.085 [BPC1] No Fault, FailCount= 1
2017-04-14T15:21:40.020Z,1492183300.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:21:40.816Z,1492183300.816 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:22:49.920Z,1492183369.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:22:50.716Z,1492183370.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:22:52.797Z,1492183372.797 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:22:57.962Z,1492183377.962 [PNI_TCM](ERROR): CRC does not match. Expected:0x38743 got:0x16748
2017-04-14T15:23:02.762Z,1492183382.762 [PNI_TCM](ERROR): CRC does not match. Expected:0x50595 got:0x65304
2017-04-14T15:23:04.364Z,1492183384.364 [PNI_TCM](ERROR): CRC does not match. Expected:0x53394 got:0x49281
2017-04-14T15:23:14.032Z,1492183394.032 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:23:14.032Z,1492183394.032 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:23:14.032Z,1492183394.032 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:23:14.032Z,1492183394.032 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:23:14.404Z,1492183394.404 [Default:CheckIn:D] Stopped
2017-04-14T15:23:14.404Z,1492183394.404 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:23:17.909Z,1492183397.909 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 717.151432 min 
2017-04-14T15:23:17.910Z,1492183397.909 [Default:CheckIn:E] Stopped
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn] Stopped
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn](INFO): Running loop #105
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn] Running Loop=105
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:23:17.910Z,1492183397.910 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:23:18.357Z,1492183398.357 [NAL9602](INFO): Powering up
2017-04-14T15:23:29.561Z,1492183409.561 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:23:47.593Z,1492183427.593 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:23:47.593Z,1492183427.593 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:23:47.593Z,1492183427.593 [BPC1](ERROR): Communications Fault
2017-04-14T15:23:47.644Z,1492183427.644 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:23:47.958Z,1492183427.958 [NAL9602](INFO): SBD MO Status=2, MOMSN=2197, MT Status=2, MTMSN=0
2017-04-14T15:23:47.958Z,1492183427.958 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:23:48.816Z,1492183428.816 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:23:48.816Z,1492183428.816 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:23:48.816Z,1492183428.816 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:23:48.830Z,1492183428.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:23:48.830Z,1492183428.830 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:23:48.830Z,1492183428.830 [BPC1] No Fault, FailCount= 1
2017-04-14T15:23:49.278Z,1492183429.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:23:49.278Z,1492183429.278 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:23:49.626Z,1492183429.626 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:23:49.626Z,1492183429.626 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:23:49.627Z,1492183429.627 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:23:59.012Z,1492183439.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:23:59.808Z,1492183439.808 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:24:13.796Z,1492183453.796 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:24:14.592Z,1492183454.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:24:29.944Z,1492183469.944 [NAL9602](INFO): SBD MO Status=0, MOMSN=2197, MT Status=0, MTMSN=0
2017-04-14T15:24:29.944Z,1492183469.944 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:24:31.148Z,1492183471.148 [NAL9602](INFO): GPS fix at 20170414T152536: (36.802351, -121.787113)
2017-04-14T15:24:31.212Z,1492183471.212 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:24:31.212Z,1492183471.212 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:24:35.943Z,1492183475.943 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0424.lzma
2017-04-14T15:24:36.739Z,1492183476.739 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0424.lzma.bak
2017-04-14T15:24:36.747Z,1492183476.747 [DataOverHttps](INFO): SBD MOMSN=4886274
2017-04-14T15:24:41.081Z,1492183481.081 [NAL9602](INFO): Powering down
2017-04-14T15:24:46.433Z,1492183486.434 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0425.lzma
2017-04-14T15:24:47.167Z,1492183487.167 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0425.lzma.bak
2017-04-14T15:24:47.168Z,1492183487.168 [DataOverHttps](INFO): SBD MOMSN=4886277
2017-04-14T15:24:47.685Z,1492183487.685 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:24:47.685Z,1492183487.685 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:24:47.686Z,1492183487.685 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:25:09.708Z,1492183509.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:25:10.506Z,1492183510.506 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:25:23.688Z,1492183523.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:25:24.484Z,1492183524.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:26:32.828Z,1492183592.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:26:33.624Z,1492183593.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:26:51.927Z,1492183611.927 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:26:51.927Z,1492183611.927 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:26:51.927Z,1492183611.927 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:26:51.953Z,1492183611.953 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:26:52.111Z,1492183612.111 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:26:52.111Z,1492183612.111 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:26:52.442Z,1492183612.442 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:26:52.442Z,1492183612.443 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:26:52.443Z,1492183612.443 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:27:43.464Z,1492183663.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:27:44.260Z,1492183664.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:27:57.452Z,1492183677.452 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:27:58.248Z,1492183678.248 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:28:52.568Z,1492183732.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:28:53.364Z,1492183733.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:29:48.355Z,1492183788.355 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:29:48.356Z,1492183788.355 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:29:48.356Z,1492183788.356 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:29:48.356Z,1492183788.356 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:29:48.761Z,1492183788.761 [Default:CheckIn:D] Stopped
2017-04-14T15:29:48.761Z,1492183788.761 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 723.724023 min 
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn:E] Stopped
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn] Stopped
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:29:52.247Z,1492183792.247 [Default:CheckIn](INFO): Running loop #106
2017-04-14T15:29:52.248Z,1492183792.247 [Default:CheckIn] Running Loop=106
2017-04-14T15:29:52.248Z,1492183792.248 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:29:52.248Z,1492183792.248 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:29:52.700Z,1492183792.700 [NAL9602](INFO): Powering up
2017-04-14T15:29:52.767Z,1492183792.767 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:29:52.767Z,1492183792.767 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:29:52.767Z,1492183792.767 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:29:52.780Z,1492183792.780 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:29:53.198Z,1492183793.198 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:29:53.199Z,1492183793.198 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:29:53.577Z,1492183793.577 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:29:53.578Z,1492183793.578 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:29:53.578Z,1492183793.578 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:30:03.898Z,1492183803.898 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:30:15.910Z,1492183815.910 [NAL9602](INFO): SBD MO Status=0, MOMSN=2198, MT Status=0, MTMSN=0
2017-04-14T15:30:15.910Z,1492183815.910 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:30:17.244Z,1492183817.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:30:18.040Z,1492183818.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:30:25.925Z,1492183825.925 [NAL9602](INFO): GPS fix at 20170414T153132: (36.802308, -121.787094)
2017-04-14T15:30:26.042Z,1492183826.042 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:30:26.042Z,1492183826.042 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:30:30.786Z,1492183830.786 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0428.lzma
2017-04-14T15:30:31.583Z,1492183831.583 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0428.lzma.bak
2017-04-14T15:30:31.583Z,1492183831.583 [DataOverHttps](INFO): SBD MOMSN=4886281
2017-04-14T15:30:35.818Z,1492183835.818 [NAL9602](INFO): Powering down
2017-04-14T15:30:41.233Z,1492183841.233 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0429.lzma
2017-04-14T15:30:41.990Z,1492183841.990 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0429.lzma.bak
2017-04-14T15:30:41.991Z,1492183841.991 [DataOverHttps](INFO): SBD MOMSN=4886284
2017-04-14T15:30:42.039Z,1492183842.039 [PNI_TCM](ERROR): CRC does not match. Expected:0x8814 got:0x16820
2017-04-14T15:30:42.474Z,1492183842.474 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:30:42.474Z,1492183842.474 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:30:42.475Z,1492183842.474 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:30:56.217Z,1492183856.217 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:30:56.217Z,1492183856.217 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:30:56.217Z,1492183856.217 [BPC1](ERROR): Communications Fault
2017-04-14T15:30:56.309Z,1492183856.309 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:30:57.460Z,1492183857.460 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:30:57.460Z,1492183857.460 [BPC1] No Fault, FailCount= 1
2017-04-14T15:31:27.116Z,1492183887.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:31:27.912Z,1492183887.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:31:41.113Z,1492183901.113 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:31:41.908Z,1492183901.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:32:37.009Z,1492183957.009 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:32:37.806Z,1492183957.806 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:32:50.272Z,1492183970.272 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:32:51.068Z,1492183971.068 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:32:53.098Z,1492183973.098 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:32:53.867Z,1492183973.867 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:32:53.867Z,1492183973.867 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:32:53.867Z,1492183973.867 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:32:53.882Z,1492183973.882 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:32:54.285Z,1492183974.285 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:32:54.285Z,1492183974.285 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:32:54.685Z,1492183974.685 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:32:54.686Z,1492183974.686 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:32:54.686Z,1492183974.686 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:32:55.443Z,1492183975.443 [PNI_TCM](ERROR): CRC does not match. Expected:0x37214 got:0x46360
2017-04-14T15:33:42.629Z,1492184022.629 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:33:42.629Z,1492184022.629 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:33:42.629Z,1492184022.629 [BPC1](ERROR): Data Fault
2017-04-14T15:33:42.726Z,1492184022.726 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:33:47.116Z,1492184027.116 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:33:47.116Z,1492184027.116 [BPC1] No Fault, FailCount= 1
2017-04-14T15:34:00.885Z,1492184040.885 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:34:01.680Z,1492184041.680 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:34:44.364Z,1492184084.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:34:45.160Z,1492184085.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:35:10.804Z,1492184110.804 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:35:11.601Z,1492184111.601 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:35:14.387Z,1492184114.387 [CBIT](IMPORTANT): Beginning ground fault scan
2017-04-14T15:35:24.784Z,1492184124.784 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 0.135086
CHAN A1 (24V): 0.131426
CHAN A2 (12V): 0.002712
CHAN A3 (5V): 0.000380
CHAN B0 (3.3V): -0.001105
CHAN B1 (3.15aV): -0.001717
CHAN B2 (3.15bV): -0.001723
CHAN B3 (GND): -0.003078
OPEN: 0.003593
Full Scale Calc: 4.765 mA, -1.589 mA
2017-04-14T15:35:32.319Z,1492184132.319 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:35:32.319Z,1492184132.319 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:35:32.319Z,1492184132.319 [BPC1](ERROR): Communications Fault
2017-04-14T15:35:32.349Z,1492184132.349 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:35:33.548Z,1492184133.548 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:35:33.548Z,1492184133.548 [BPC1] No Fault, FailCount= 1
2017-04-14T15:35:43.201Z,1492184143.201 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:35:43.201Z,1492184143.201 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:35:43.201Z,1492184143.201 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:35:43.201Z,1492184143.201 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:35:43.596Z,1492184143.596 [Default:CheckIn:D] Stopped
2017-04-14T15:35:43.596Z,1492184143.596 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:35:43.971Z,1492184143.971 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 729.637956 min 
2017-04-14T15:35:43.975Z,1492184143.975 [Default:CheckIn:E] Stopped
2017-04-14T15:35:43.975Z,1492184143.975 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:35:43.975Z,1492184143.976 [Default:CheckIn] Stopped
2017-04-14T15:35:43.976Z,1492184143.976 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:35:43.976Z,1492184143.976 [Default:CheckIn](INFO): Running loop #107
2017-04-14T15:35:43.976Z,1492184143.976 [Default:CheckIn] Running Loop=107
2017-04-14T15:35:43.976Z,1492184143.976 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:35:43.976Z,1492184143.976 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:35:48.648Z,1492184148.648 [NAL9602](INFO): Powering up
2017-04-14T15:35:54.709Z,1492184154.708 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:35:54.709Z,1492184154.709 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:35:54.709Z,1492184154.709 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:35:54.752Z,1492184154.752 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:35:55.156Z,1492184155.156 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:35:55.156Z,1492184155.156 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:35:55.507Z,1492184155.507 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:35:55.508Z,1492184155.508 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:35:55.508Z,1492184155.508 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:35:59.473Z,1492184159.473 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:36:19.892Z,1492184179.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:36:20.689Z,1492184180.690 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:36:29.848Z,1492184189.848 [NAL9602](INFO): SBD MO Status=2, MOMSN=2199, MT Status=2, MTMSN=0
2017-04-14T15:36:29.848Z,1492184189.848 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:36:30.293Z,1492184190.293 [PNI_TCM](ERROR): CRC does not match. Expected:0x22515 got:0x6593
2017-04-14T15:36:44.270Z,1492184204.270 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T15:36:55.094Z,1492184215.094 [NAL9602](INFO): SBD MO Status=0, MOMSN=2199, MT Status=0, MTMSN=0
2017-04-14T15:36:55.094Z,1492184215.094 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:36:56.296Z,1492184216.296 [NAL9602](INFO): GPS fix at 20170414T153803: (36.802394, -121.787143)
2017-04-14T15:36:56.380Z,1492184216.381 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:36:56.381Z,1492184216.381 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:37:01.117Z,1492184221.117 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0432.lzma
2017-04-14T15:37:01.919Z,1492184221.919 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0432.lzma.bak
2017-04-14T15:37:01.919Z,1492184221.919 [DataOverHttps](INFO): SBD MOMSN=4886288
2017-04-14T15:37:06.225Z,1492184226.225 [NAL9602](INFO): Powering down
2017-04-14T15:37:12.604Z,1492184232.604 [DataOverHttps](INFO): Sending 307 bytes from file Logs/20170414T032153/Express0433.lzma
2017-04-14T15:37:13.367Z,1492184233.367 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0433.lzma.bak
2017-04-14T15:37:13.367Z,1492184233.367 [DataOverHttps](INFO): SBD MOMSN=4886291
2017-04-14T15:37:13.886Z,1492184233.886 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:37:13.886Z,1492184233.886 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:37:13.886Z,1492184233.886 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:37:44.520Z,1492184264.520 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:37:45.317Z,1492184265.317 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:38:53.632Z,1492184333.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:38:54.428Z,1492184334.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:38:55.755Z,1492184335.755 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:38:55.755Z,1492184335.755 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:38:55.755Z,1492184335.755 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:38:55.769Z,1492184335.769 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:38:56.240Z,1492184336.240 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:38:56.240Z,1492184336.240 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:38:56.611Z,1492184336.611 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:38:56.660Z,1492184336.659 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:38:56.660Z,1492184336.660 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:39:00.056Z,1492184340.056 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:39:00.056Z,1492184340.056 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:39:00.056Z,1492184340.056 [BPC1](ERROR): Data Fault
2017-04-14T15:39:00.169Z,1492184340.169 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:39:01.319Z,1492184341.319 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:39:01.319Z,1492184341.319 [BPC1] No Fault, FailCount= 1
2017-04-14T15:39:08.408Z,1492184348.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:39:09.204Z,1492184349.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:40:04.332Z,1492184404.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:40:05.128Z,1492184405.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:40:18.300Z,1492184418.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:40:19.096Z,1492184419.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:40:35.782Z,1492184435.782 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:40:35.782Z,1492184435.782 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:40:35.782Z,1492184435.782 [BPC1](ERROR): Communications Fault
2017-04-14T15:40:35.836Z,1492184435.836 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:40:37.136Z,1492184437.136 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:40:37.136Z,1492184437.136 [BPC1] No Fault, FailCount= 1
2017-04-14T15:41:28.193Z,1492184488.193 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:41:28.988Z,1492184488.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:41:47.549Z,1492184507.549 [BPC1](ERROR): Failed to parse message.
2017-04-14T15:41:47.549Z,1492184507.549 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:41:47.549Z,1492184507.549 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:41:47.549Z,1492184507.549 [BPC1](ERROR): Data Fault
2017-04-14T15:41:47.617Z,1492184507.617 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:41:48.825Z,1492184508.825 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:41:48.825Z,1492184508.825 [BPC1] No Fault, FailCount= 1
2017-04-14T15:41:56.781Z,1492184516.781 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:41:56.781Z,1492184516.781 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:41:56.781Z,1492184516.781 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:41:56.816Z,1492184516.816 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:41:57.322Z,1492184517.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:41:57.322Z,1492184517.322 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:41:57.581Z,1492184517.581 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:41:57.582Z,1492184517.582 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:41:57.582Z,1492184517.582 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:42:00.367Z,1492184520.367 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:42:00.367Z,1492184520.367 [BPC1] Data Fault, FailCount= 2
2017-04-14T15:42:00.367Z,1492184520.367 [BPC1](ERROR): Data Fault
2017-04-14T15:42:00.437Z,1492184520.437 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:42:01.616Z,1492184521.616 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:42:01.617Z,1492184521.616 [BPC1] No Fault, FailCount= 2
2017-04-14T15:42:14.382Z,1492184534.382 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:42:14.382Z,1492184534.382 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:42:14.382Z,1492184534.382 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:42:14.382Z,1492184534.382 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:42:14.898Z,1492184534.898 [Default:CheckIn:D] Stopped
2017-04-14T15:42:14.898Z,1492184534.898 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:42:18.179Z,1492184538.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 736.159635 min 
2017-04-14T15:42:18.179Z,1492184538.179 [Default:CheckIn:E] Stopped
2017-04-14T15:42:18.179Z,1492184538.180 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn] Stopped
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn](INFO): Running loop #108
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn] Running Loop=108
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:42:18.180Z,1492184538.180 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:42:18.640Z,1492184538.640 [NAL9602](INFO): Powering up
2017-04-14T15:42:29.842Z,1492184549.842 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:42:38.072Z,1492184558.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:42:38.868Z,1492184558.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:42:43.842Z,1492184563.842 [NAL9602](INFO): SBD MO Status=0, MOMSN=2200, MT Status=0, MTMSN=0
2017-04-14T15:42:43.842Z,1492184563.842 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:42:52.053Z,1492184572.053 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:42:52.848Z,1492184572.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:42:53.041Z,1492184573.041 [NAL9602](INFO): GPS fix at 20170414T154400: (36.802364, -121.787147)
2017-04-14T15:42:53.118Z,1492184573.118 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:42:53.118Z,1492184573.118 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:42:53.188Z,1492184573.188 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:42:57.928Z,1492184577.928 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0436.lzma
2017-04-14T15:42:58.772Z,1492184578.772 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0436.lzma.bak
2017-04-14T15:42:58.772Z,1492184578.772 [DataOverHttps](INFO): SBD MOMSN=4886308
2017-04-14T15:43:03.017Z,1492184583.017 [NAL9602](INFO): Powering down
2017-04-14T15:43:04.889Z,1492184584.889 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:43:04.889Z,1492184584.889 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:43:04.889Z,1492184584.889 [BPC1](ERROR): Communications Fault
2017-04-14T15:43:04.977Z,1492184584.977 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:43:08.296Z,1492184588.296 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0437.lzma
2017-04-14T15:43:08.775Z,1492184588.776 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:43:08.776Z,1492184588.776 [BPC1] No Fault, FailCount= 1
2017-04-14T15:43:09.091Z,1492184589.091 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0437.lzma.bak
2017-04-14T15:43:09.091Z,1492184589.091 [DataOverHttps](INFO): SBD MOMSN=4886312
2017-04-14T15:43:09.575Z,1492184589.575 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:43:09.575Z,1492184589.575 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:43:09.575Z,1492184589.575 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:44:01.940Z,1492184641.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:44:02.736Z,1492184642.736 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:44:04.141Z,1492184644.141 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:44:04.141Z,1492184644.141 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:44:04.141Z,1492184644.141 [BPC1](ERROR): Data Fault
2017-04-14T15:44:04.204Z,1492184644.204 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:44:05.400Z,1492184645.401 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:44:05.401Z,1492184645.401 [BPC1] No Fault, FailCount= 1
2017-04-14T15:44:57.782Z,1492184697.782 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:44:57.782Z,1492184697.782 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:44:57.782Z,1492184697.782 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:44:57.796Z,1492184697.796 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:44:58.209Z,1492184698.209 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:44:58.209Z,1492184698.210 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:44:58.584Z,1492184698.583 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:44:58.584Z,1492184698.584 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:44:58.584Z,1492184698.584 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:45:11.848Z,1492184711.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:45:12.644Z,1492184712.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:45:25.820Z,1492184725.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:45:26.616Z,1492184726.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:46:35.708Z,1492184795.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:46:36.504Z,1492184796.504 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:46:49.685Z,1492184809.685 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:46:50.480Z,1492184810.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:47:45.609Z,1492184865.609 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:47:46.412Z,1492184866.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:47:58.679Z,1492184878.679 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:47:58.679Z,1492184878.679 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:47:58.683Z,1492184878.683 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:47:58.709Z,1492184878.709 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:47:59.126Z,1492184879.126 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:47:59.127Z,1492184879.127 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:47:59.502Z,1492184879.502 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:47:59.503Z,1492184879.503 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:47:59.503Z,1492184879.503 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:47:59.592Z,1492184879.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:48:00.388Z,1492184880.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:48:10.369Z,1492184890.369 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:48:10.369Z,1492184890.369 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:48:10.369Z,1492184890.369 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:48:10.369Z,1492184890.369 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:48:10.705Z,1492184890.704 [Default:CheckIn:D] Stopped
2017-04-14T15:48:10.705Z,1492184890.705 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 742.089779 min 
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn:E] Stopped
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn] Stopped
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn](INFO): Running loop #109
2017-04-14T15:48:11.116Z,1492184891.116 [Default:CheckIn] Running Loop=109
2017-04-14T15:48:11.117Z,1492184891.117 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:48:11.117Z,1492184891.117 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:48:16.109Z,1492184896.109 [NAL9602](INFO): Powering up
2017-04-14T15:48:27.289Z,1492184907.289 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:48:46.490Z,1492184926.490 [NAL9602](INFO): SBD MO Status=2, MOMSN=2201, MT Status=2, MTMSN=0
2017-04-14T15:48:46.490Z,1492184926.490 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:49:08.996Z,1492184948.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:49:09.400Z,1492184949.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:49:29.902Z,1492184969.902 [NAL9602](INFO): SBD MO Status=2, MOMSN=2201, MT Status=2, MTMSN=0
2017-04-14T15:49:29.902Z,1492184969.902 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:49:57.533Z,1492184997.533 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:49:57.533Z,1492184997.533 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:49:57.534Z,1492184997.533 [BPC1](ERROR): Data Fault
2017-04-14T15:49:57.594Z,1492184997.594 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:49:58.785Z,1492184998.784 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:49:58.785Z,1492184998.785 [BPC1] No Fault, FailCount= 1
2017-04-14T15:50:10.725Z,1492185010.725 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T15:50:10.725Z,1492185010.725 [BPC1] Data Fault, FailCount= 2
2017-04-14T15:50:10.725Z,1492185010.725 [BPC1](ERROR): Data Fault
2017-04-14T15:50:10.798Z,1492185010.798 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:50:16.368Z,1492185016.368 [NAL9602](INFO): SBD MO Status=2, MOMSN=2201, MT Status=2, MTMSN=0
2017-04-14T15:50:16.368Z,1492185016.368 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:50:16.454Z,1492185016.454 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:50:16.454Z,1492185016.454 [BPC1] No Fault, FailCount= 2
2017-04-14T15:50:18.576Z,1492185018.576 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:50:19.372Z,1492185019.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:50:32.572Z,1492185032.572 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:50:33.369Z,1492185033.369 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:50:59.734Z,1492185059.734 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:50:59.735Z,1492185059.735 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T15:50:59.735Z,1492185059.735 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:50:59.751Z,1492185059.751 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:51:00.219Z,1492185060.219 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:51:00.219Z,1492185060.219 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T15:51:00.551Z,1492185060.551 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:51:00.551Z,1492185060.551 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:51:00.552Z,1492185060.552 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:51:10.512Z,1492185070.512 [BPC1](ERROR): Failed to parse message.
2017-04-14T15:51:10.512Z,1492185070.513 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:51:10.513Z,1492185070.513 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:51:10.513Z,1492185070.513 [BPC1](ERROR): Data Fault
2017-04-14T15:51:10.581Z,1492185070.580 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:51:11.747Z,1492185071.747 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:51:11.747Z,1492185071.747 [BPC1] No Fault, FailCount= 1
2017-04-14T15:51:15.753Z,1492185075.753 [NAL9602](INFO): SBD MO Status=0, MOMSN=2201, MT Status=0, MTMSN=0
2017-04-14T15:51:15.753Z,1492185075.753 [NAL9602](INFO): No messages in MT queue
2017-04-14T15:51:16.956Z,1492185076.956 [NAL9602](INFO): GPS fix at 20170414T155225: (36.802350, -121.787132)
2017-04-14T15:51:17.028Z,1492185077.028 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T15:51:17.028Z,1492185077.028 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T15:51:21.765Z,1492185081.765 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0440.lzma
2017-04-14T15:51:22.564Z,1492185082.564 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0440.lzma.bak
2017-04-14T15:51:22.564Z,1492185082.564 [DataOverHttps](INFO): SBD MOMSN=4886334
2017-04-14T15:51:26.952Z,1492185086.952 [NAL9602](INFO): Powering down
2017-04-14T15:51:32.620Z,1492185092.620 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0441.lzma
2017-04-14T15:51:33.407Z,1492185093.407 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0441.lzma.bak
2017-04-14T15:51:33.407Z,1492185093.407 [DataOverHttps](INFO): SBD MOMSN=4886337
2017-04-14T15:51:34.010Z,1492185094.010 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T15:51:34.010Z,1492185094.010 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T15:51:34.010Z,1492185094.010 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T15:51:43.240Z,1492185103.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:51:44.036Z,1492185104.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:52:13.263Z,1492185133.263 [PNI_TCM](ERROR): CRC does not match. Expected:0x57422 got:0x36275
2017-04-14T15:52:20.807Z,1492185140.807 [PNI_TCM](ERROR): CRC does not match. Expected:0x52891 got:0x28918
2017-04-14T15:52:53.128Z,1492185173.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:52:53.434Z,1492185173.434 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T15:52:53.924Z,1492185173.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:53:07.104Z,1492185187.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:53:07.900Z,1492185187.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:53:38.684Z,1492185218.684 [PNI_TCM](ERROR): CRC does not match. Expected:0x56964 got:0x16754
2017-04-14T15:53:39.088Z,1492185219.088 [PNI_TCM](ERROR): CRC does not match. Expected:0x8247 got:0x43181
2017-04-14T15:53:39.488Z,1492185219.488 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:53:39.488Z,1492185219.488 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:53:39.488Z,1492185219.488 [BPC1](ERROR): Data Fault
2017-04-14T15:53:39.568Z,1492185219.569 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:53:40.736Z,1492185220.736 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:53:40.737Z,1492185220.737 [BPC1] No Fault, FailCount= 1
2017-04-14T15:53:48.675Z,1492185228.675 [PNI_TCM](ERROR): CRC does not match. Expected:0x29059 got:0x49445
2017-04-14T15:54:00.673Z,1492185240.673 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-04-14T15:54:00.706Z,1492185240.706 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:54:00.706Z,1492185240.706 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T15:54:00.706Z,1492185240.706 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:54:00.720Z,1492185240.720 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:54:01.118Z,1492185241.118 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:54:01.118Z,1492185241.118 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T15:54:01.515Z,1492185241.515 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:54:01.515Z,1492185241.515 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:54:01.516Z,1492185241.516 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:54:16.988Z,1492185256.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:54:17.784Z,1492185257.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:54:56.024Z,1492185296.024 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:54:56.024Z,1492185296.024 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:54:56.024Z,1492185296.024 [BPC1](ERROR): Communications Fault
2017-04-14T15:54:56.085Z,1492185296.085 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:54:57.294Z,1492185297.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:54:57.294Z,1492185297.294 [BPC1] No Fault, FailCount= 1
2017-04-14T15:55:26.116Z,1492185326.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:55:26.912Z,1492185326.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:55:40.072Z,1492185340.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:55:40.869Z,1492185340.869 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:56:13.266Z,1492185373.266 [PNI_TCM](ERROR): CRC does not match. Expected:0x48911 got:0x49446
2017-04-14T15:56:34.513Z,1492185394.513 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T15:56:34.513Z,1492185394.513 [Default:CheckIn:C.Wait] Stopped
2017-04-14T15:56:34.513Z,1492185394.513 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T15:56:34.513Z,1492185394.513 [Default:CheckIn:D] Running Loop=1
2017-04-14T15:56:34.917Z,1492185394.917 [Default:CheckIn:D] Stopped
2017-04-14T15:56:34.917Z,1492185394.917 [Default:CheckIn:E] Running Loop=1
2017-04-14T15:56:39.117Z,1492185399.117 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 750.493294 min 
2017-04-14T15:56:39.117Z,1492185399.117 [Default:CheckIn:E] Stopped
2017-04-14T15:56:39.117Z,1492185399.117 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T15:56:39.117Z,1492185399.117 [Default:CheckIn] Stopped
2017-04-14T15:56:39.118Z,1492185399.118 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T15:56:39.118Z,1492185399.118 [Default:CheckIn](INFO): Running loop #110
2017-04-14T15:56:39.118Z,1492185399.118 [Default:CheckIn] Running Loop=110
2017-04-14T15:56:39.118Z,1492185399.118 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T15:56:39.118Z,1492185399.118 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T15:56:39.560Z,1492185399.560 [NAL9602](INFO): Powering up
2017-04-14T15:56:50.740Z,1492185410.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:56:50.765Z,1492185410.765 [NAL9602](INFO): NAL9602 initialized
2017-04-14T15:56:51.536Z,1492185411.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:56:53.620Z,1492185413.620 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T15:56:53.620Z,1492185413.620 [BPC1] Data Fault, FailCount= 1
2017-04-14T15:56:53.620Z,1492185413.620 [BPC1](ERROR): Data Fault
2017-04-14T15:56:53.650Z,1492185413.650 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T15:56:54.853Z,1492185414.853 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:56:54.853Z,1492185414.853 [BPC1] No Fault, FailCount= 1
2017-04-14T15:56:58.005Z,1492185418.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x53433 got:0x54558
2017-04-14T15:57:01.627Z,1492185421.626 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T15:57:01.627Z,1492185421.627 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T15:57:01.627Z,1492185421.627 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T15:57:01.657Z,1492185421.657 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T15:57:02.039Z,1492185422.039 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T15:57:02.039Z,1492185422.039 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T15:57:02.421Z,1492185422.421 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T15:57:02.421Z,1492185422.421 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T15:57:02.422Z,1492185422.422 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T15:57:12.766Z,1492185432.766 [NAL9602](INFO): SBD MO Status=2, MOMSN=2202, MT Status=2, MTMSN=0
2017-04-14T15:57:12.766Z,1492185432.766 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:57:30.362Z,1492185450.362 [NAL9602](INFO): SBD MO Status=2, MOMSN=2202, MT Status=2, MTMSN=0
2017-04-14T15:57:30.362Z,1492185450.362 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:57:47.736Z,1492185467.736 [NAL9602](INFO): SBD MO Status=2, MOMSN=2202, MT Status=2, MTMSN=0
2017-04-14T15:57:47.736Z,1492185467.736 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:58:14.628Z,1492185494.628 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:58:15.424Z,1492185495.424 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:58:28.624Z,1492185508.624 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:58:29.420Z,1492185509.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:59:23.720Z,1492185563.720 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:59:24.516Z,1492185564.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T15:59:39.234Z,1492185579.234 [NAL9602](INFO): SBD MO Status=2, MOMSN=2202, MT Status=2, MTMSN=0
2017-04-14T15:59:39.234Z,1492185579.234 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:59:54.218Z,1492185594.218 [NAL9602](INFO): SBD MO Status=2, MOMSN=2202, MT Status=2, MTMSN=0
2017-04-14T15:59:54.218Z,1492185594.218 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T15:59:56.238Z,1492185596.238 [BPC1](ERROR): Failed to receive battery data
2017-04-14T15:59:56.238Z,1492185596.238 [BPC1] Communications Fault, FailCount= 1
2017-04-14T15:59:56.238Z,1492185596.238 [BPC1](ERROR): Communications Fault
2017-04-14T15:59:56.293Z,1492185596.293 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T15:59:57.475Z,1492185597.474 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T15:59:57.475Z,1492185597.475 [BPC1] No Fault, FailCount= 1
2017-04-14T16:00:02.649Z,1492185602.649 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:00:02.649Z,1492185602.649 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T16:00:02.649Z,1492185602.649 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:00:02.717Z,1492185602.717 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:00:03.142Z,1492185603.142 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:00:03.142Z,1492185603.142 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T16:00:03.406Z,1492185603.406 [NAL9602](INFO): SBD MO Status=0, MOMSN=2202, MT Status=0, MTMSN=0
2017-04-14T16:00:03.406Z,1492185603.406 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:00:03.486Z,1492185603.486 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:00:03.486Z,1492185603.486 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:00:03.487Z,1492185603.487 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:00:04.608Z,1492185604.608 [NAL9602](INFO): GPS fix at 20170414T160114: (36.802371, -121.787122)
2017-04-14T16:00:04.687Z,1492185604.687 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:00:04.687Z,1492185604.687 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:00:09.529Z,1492185609.529 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0444.lzma
2017-04-14T16:00:10.307Z,1492185610.307 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0444.lzma.bak
2017-04-14T16:00:10.307Z,1492185610.307 [DataOverHttps](INFO): SBD MOMSN=4886345
2017-04-14T16:00:14.518Z,1492185614.518 [NAL9602](INFO): Powering down
2017-04-14T16:00:19.868Z,1492185619.868 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0445.lzma
2017-04-14T16:00:20.622Z,1492185620.622 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0445.lzma.bak
2017-04-14T16:00:20.622Z,1492185620.622 [DataOverHttps](INFO): SBD MOMSN=4886350
2017-04-14T16:00:21.845Z,1492185621.845 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:00:21.845Z,1492185621.845 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:00:21.845Z,1492185621.845 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:00:28.868Z,1492185628.868 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-04-14T16:00:48.377Z,1492185648.377 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:00:49.172Z,1492185649.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:02:08.567Z,1492185728.567 [BPC1](ERROR): Failed to parse message.
2017-04-14T16:02:08.567Z,1492185728.567 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:02:08.579Z,1492185728.579 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:02:08.579Z,1492185728.579 [BPC1](ERROR): Data Fault
2017-04-14T16:02:08.640Z,1492185728.640 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:02:09.832Z,1492185729.832 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:02:09.832Z,1492185729.832 [BPC1] No Fault, FailCount= 1
2017-04-14T16:02:12.268Z,1492185732.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:02:13.065Z,1492185733.065 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:02:26.045Z,1492185746.045 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:02:26.045Z,1492185746.045 [BPC1] Communications Fault, FailCount= 2
2017-04-14T16:02:26.045Z,1492185746.046 [BPC1](ERROR): Communications Fault
2017-04-14T16:02:26.096Z,1492185746.096 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:02:26.236Z,1492185746.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:02:26.983Z,1492185746.983 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:02:26.983Z,1492185746.983 [BPC1] No Fault, FailCount= 2
2017-04-14T16:02:27.032Z,1492185747.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:02:53.816Z,1492185773.816 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:03:03.774Z,1492185783.773 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:03:03.774Z,1492185783.774 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:03:03.774Z,1492185783.774 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:03:03.788Z,1492185783.787 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:03:04.203Z,1492185784.203 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:03:04.204Z,1492185784.204 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:03:04.562Z,1492185784.562 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:03:04.562Z,1492185784.562 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:03:04.562Z,1492185784.562 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:03:36.132Z,1492185816.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:03:36.928Z,1492185816.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:04:43.519Z,1492185883.519 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:04:43.519Z,1492185883.519 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:04:43.519Z,1492185883.519 [BPC1](ERROR): Communications Fault
2017-04-14T16:04:43.623Z,1492185883.623 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:04:44.830Z,1492185884.830 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:04:44.830Z,1492185884.830 [BPC1] No Fault, FailCount= 1
2017-04-14T16:04:46.024Z,1492185886.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:04:46.820Z,1492185886.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:05:00.004Z,1492185900.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:05:00.801Z,1492185900.801 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:05:22.348Z,1492185922.348 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:05:22.348Z,1492185922.348 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:05:22.348Z,1492185922.348 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:05:22.348Z,1492185922.348 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:05:22.758Z,1492185922.759 [Default:CheckIn:D] Stopped
2017-04-14T16:05:22.759Z,1492185922.759 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 759.290690 min 
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn:E] Stopped
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn] Stopped
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn](INFO): Running loop #111
2017-04-14T16:05:23.144Z,1492185923.144 [Default:CheckIn] Running Loop=111
2017-04-14T16:05:23.145Z,1492185923.145 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:05:23.145Z,1492185923.145 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:05:27.044Z,1492185927.044 [NAL9602](INFO): Powering up
2017-04-14T16:05:37.999Z,1492185937.999 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:06:01.203Z,1492185961.203 [NAL9602](INFO): SBD MO Status=0, MOMSN=2203, MT Status=0, MTMSN=0
2017-04-14T16:06:01.203Z,1492185961.203 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:06:02.396Z,1492185962.396 [NAL9602](INFO): GPS fix at 20170414T160712: (36.802363, -121.787142)
2017-04-14T16:06:02.486Z,1492185962.486 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:06:02.486Z,1492185962.486 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:06:08.024Z,1492185968.024 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:06:08.024Z,1492185968.024 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:06:08.024Z,1492185968.024 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:06:08.066Z,1492185968.066 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:06:08.089Z,1492185968.089 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0448.lzma
2017-04-14T16:06:08.292Z,1492185968.292 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:06:08.292Z,1492185968.293 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:06:08.574Z,1492185968.574 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:06:08.574Z,1492185968.574 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:06:08.575Z,1492185968.575 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:06:08.890Z,1492185968.890 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0448.lzma.bak
2017-04-14T16:06:08.890Z,1492185968.890 [DataOverHttps](INFO): SBD MOMSN=4886396
2017-04-14T16:06:09.900Z,1492185969.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:06:10.696Z,1492185970.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:06:16.630Z,1492185976.630 [NAL9602](INFO): Powering down
2017-04-14T16:06:22.945Z,1492185982.945 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0449.lzma
2017-04-14T16:06:23.735Z,1492185983.735 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0449.lzma.bak
2017-04-14T16:06:23.735Z,1492185983.735 [DataOverHttps](INFO): SBD MOMSN=4886399
2017-04-14T16:06:23.868Z,1492185983.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:06:24.393Z,1492185984.393 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:06:24.393Z,1492185984.393 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:06:24.394Z,1492185984.394 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:06:24.664Z,1492185984.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:07:36.108Z,1492186056.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:07:36.904Z,1492186056.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:07:37.308Z,1492186057.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:07:47.752Z,1492186067.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:07:48.548Z,1492186068.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:08:31.216Z,1492186111.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:08:32.012Z,1492186112.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:08:57.600Z,1492186137.600 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:08:58.396Z,1492186138.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:09:08.906Z,1492186148.906 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:09:08.906Z,1492186148.906 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:09:08.906Z,1492186148.906 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:09:08.944Z,1492186148.944 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:09:09.314Z,1492186149.314 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:09:09.314Z,1492186149.314 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:09:09.702Z,1492186149.702 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:09:09.702Z,1492186149.703 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:09:09.703Z,1492186149.703 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:09:10.887Z,1492186150.887 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T16:09:10.887Z,1492186150.887 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:09:10.887Z,1492186150.887 [BPC1](ERROR): Data Fault
2017-04-14T16:09:10.918Z,1492186150.918 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:09:12.111Z,1492186152.111 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:09:12.111Z,1492186152.111 [BPC1] No Fault, FailCount= 1
2017-04-14T16:10:21.490Z,1492186221.490 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:10:22.284Z,1492186222.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:11:25.029Z,1492186285.029 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:11:25.030Z,1492186285.030 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:11:25.030Z,1492186285.030 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:11:25.030Z,1492186285.030 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:11:25.432Z,1492186285.432 [Default:CheckIn:D] Stopped
2017-04-14T16:11:25.432Z,1492186285.432 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:11:25.840Z,1492186285.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 765.335221 min 
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn:E] Stopped
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn] Stopped
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn](INFO): Running loop #112
2017-04-14T16:11:25.841Z,1492186285.841 [Default:CheckIn] Running Loop=112
2017-04-14T16:11:25.841Z,1492186285.842 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:11:25.842Z,1492186285.842 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:11:29.341Z,1492186289.341 [NAL9602](INFO): Powering up
2017-04-14T16:11:40.505Z,1492186300.505 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:11:44.584Z,1492186304.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:11:45.380Z,1492186305.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:11:57.306Z,1492186317.306 [NAL9602](INFO): SBD MO Status=0, MOMSN=2204, MT Status=0, MTMSN=0
2017-04-14T16:11:57.306Z,1492186317.306 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:11:58.564Z,1492186318.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:11:59.360Z,1492186319.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:12:01.381Z,1492186321.381 [PNI_TCM](ERROR): CRC does not match. Expected:0x9135 got:0x30620
2017-04-14T16:12:09.732Z,1492186329.732 [NAL9602](INFO): GPS fix at 20170414T161320: (36.802383, -121.787156)
2017-04-14T16:12:09.803Z,1492186329.803 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:12:09.803Z,1492186329.803 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:12:10.202Z,1492186330.202 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:12:10.202Z,1492186330.202 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:12:10.202Z,1492186330.202 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:12:10.216Z,1492186330.216 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:12:10.647Z,1492186330.647 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:12:10.647Z,1492186330.648 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:12:10.988Z,1492186330.988 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:12:10.989Z,1492186330.989 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:12:10.989Z,1492186330.989 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:12:14.625Z,1492186334.625 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0452.lzma
2017-04-14T16:12:15.423Z,1492186335.423 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0452.lzma.bak
2017-04-14T16:12:15.423Z,1492186335.423 [DataOverHttps](INFO): SBD MOMSN=4886411
2017-04-14T16:12:21.216Z,1492186341.216 [NAL9602](INFO): Powering down
2017-04-14T16:12:29.289Z,1492186349.289 [DataOverHttps](INFO): Sending 120 bytes from file Logs/20170414T032153/Express0453.lzma
2017-04-14T16:12:30.093Z,1492186350.093 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0453.lzma.bak
2017-04-14T16:12:30.093Z,1492186350.093 [DataOverHttps](INFO): SBD MOMSN=4886414
2017-04-14T16:12:30.813Z,1492186350.813 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:12:30.813Z,1492186350.813 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:12:30.813Z,1492186350.813 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:12:54.201Z,1492186374.201 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:13:04.507Z,1492186384.507 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-04-14T16:13:23.212Z,1492186403.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:13:24.023Z,1492186404.023 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:14:23.706Z,1492186463.706 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:14:23.706Z,1492186463.706 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:14:23.706Z,1492186463.706 [BPC1](ERROR): Communications Fault
2017-04-14T16:14:23.736Z,1492186463.736 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:14:24.960Z,1492186464.960 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:14:24.960Z,1492186464.960 [BPC1] No Fault, FailCount= 1
2017-04-14T16:14:33.104Z,1492186473.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:14:33.900Z,1492186473.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:14:47.064Z,1492186487.064 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:14:47.860Z,1492186487.860 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:15:11.246Z,1492186511.246 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:15:11.246Z,1492186511.246 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:15:11.246Z,1492186511.246 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:15:11.285Z,1492186511.284 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:15:11.740Z,1492186511.740 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:15:11.740Z,1492186511.740 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:15:12.064Z,1492186512.064 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:15:12.065Z,1492186512.065 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:15:12.065Z,1492186512.065 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:16:10.946Z,1492186570.945 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:16:11.740Z,1492186571.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:16:24.920Z,1492186584.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:16:25.716Z,1492186585.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:17:31.392Z,1492186651.392 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:17:31.392Z,1492186651.392 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:17:31.393Z,1492186651.392 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:17:31.393Z,1492186651.393 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:17:31.794Z,1492186651.794 [Default:CheckIn:D] Stopped
2017-04-14T16:17:31.794Z,1492186651.794 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:17:32.240Z,1492186652.240 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 771.441276 min 
2017-04-14T16:17:32.241Z,1492186652.240 [Default:CheckIn:E] Stopped
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn] Stopped
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn](INFO): Running loop #113
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn] Running Loop=113
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:17:32.241Z,1492186652.241 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:17:34.826Z,1492186654.826 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:17:35.620Z,1492186655.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:17:35.650Z,1492186655.650 [NAL9602](INFO): Powering up
2017-04-14T16:17:46.461Z,1492186666.461 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:17:48.788Z,1492186668.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:17:49.584Z,1492186669.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:18:12.110Z,1492186692.110 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:18:12.111Z,1492186692.111 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T16:18:12.111Z,1492186692.111 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:18:12.125Z,1492186692.125 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:18:12.534Z,1492186692.534 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:18:12.534Z,1492186692.534 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T16:18:12.912Z,1492186692.912 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:18:12.912Z,1492186692.912 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:18:12.913Z,1492186692.913 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:18:58.688Z,1492186738.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:18:59.484Z,1492186739.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:19:12.672Z,1492186752.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:19:13.480Z,1492186753.480 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:19:26.664Z,1492186766.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:19:27.460Z,1492186767.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:19:28.947Z,1492186768.947 [BPC1](ERROR): Failed to parse message.
2017-04-14T16:19:28.947Z,1492186768.947 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:19:28.947Z,1492186768.947 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:19:28.947Z,1492186768.947 [BPC1](ERROR): Data Fault
2017-04-14T16:19:29.020Z,1492186769.020 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:19:30.200Z,1492186770.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:19:30.201Z,1492186770.201 [BPC1] No Fault, FailCount= 1
2017-04-14T16:20:14.231Z,1492186814.231 [PNI_TCM](ERROR): CRC does not match. Expected:0x51717 got:0x7489
2017-04-14T16:20:36.540Z,1492186836.540 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:20:37.336Z,1492186837.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:20:50.500Z,1492186850.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:20:51.296Z,1492186851.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:21:13.054Z,1492186873.054 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:21:13.054Z,1492186873.054 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 4
2017-04-14T16:21:13.054Z,1492186873.054 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:21:13.104Z,1492186873.104 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:21:13.496Z,1492186873.496 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:21:13.496Z,1492186873.496 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 4
2017-04-14T16:21:13.870Z,1492186873.870 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:21:13.870Z,1492186873.870 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:21:13.870Z,1492186873.870 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:21:43.899Z,1492186903.899 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:21:43.900Z,1492186903.899 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:21:43.900Z,1492186903.900 [BPC1](ERROR): Data Fault
2017-04-14T16:21:43.966Z,1492186903.966 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:21:45.146Z,1492186905.146 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:21:45.146Z,1492186905.146 [BPC1] No Fault, FailCount= 1
2017-04-14T16:22:13.608Z,1492186933.608 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:14.404Z,1492186934.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:22.662Z,1492186942.662 [NAL9602](INFO): SBD MO Status=2, MOMSN=2205, MT Status=2, MTMSN=0
2017-04-14T16:22:22.663Z,1492186942.662 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:22:28.372Z,1492186948.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:29.168Z,1492186949.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:32.325Z,1492186952.325 [Default:CheckIn:Read_GPS](INFO): Timed out from 2017-04-14T16:17:32.2Z
2017-04-14T16:22:32.325Z,1492186952.325 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:22:32.325Z,1492186952.325 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:22:37.686Z,1492186957.686 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20170414T032153/Courier0456.lzma
2017-04-14T16:22:38.426Z,1492186958.427 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0456.lzma.bak
2017-04-14T16:22:38.427Z,1492186958.427 [DataOverHttps](INFO): SBD MOMSN=4886426
2017-04-14T16:22:42.423Z,1492186962.423 [NAL9602](INFO): SBD MO Status=2, MOMSN=2205, MT Status=2, MTMSN=0
2017-04-14T16:22:42.432Z,1492186962.432 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:22:48.060Z,1492186968.060 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0457.lzma
2017-04-14T16:22:48.811Z,1492186968.811 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0457.lzma.bak
2017-04-14T16:22:48.811Z,1492186968.811 [DataOverHttps](INFO): SBD MOMSN=4886428
2017-04-14T16:22:49.334Z,1492186969.334 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:22:49.334Z,1492186969.334 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:22:49.334Z,1492186969.334 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:22:54.053Z,1492186974.053 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-04-14T16:22:54.292Z,1492186974.292 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:22:57.904Z,1492186977.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:58.700Z,1492186978.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:59.360Z,1492186979.360 [NAL9602](INFO): Powering down
2017-04-14T16:22:59.496Z,1492186979.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:22:59.900Z,1492186979.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:00.697Z,1492186980.697 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:01.432Z,1492186981.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:02.228Z,1492186982.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:03.024Z,1492186983.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:03.444Z,1492186983.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:04.246Z,1492186984.246 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:05.040Z,1492186985.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:05.448Z,1492186985.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:06.244Z,1492186986.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:07.040Z,1492186987.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:07.444Z,1492186987.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:08.244Z,1492186988.244 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:09.042Z,1492186989.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:09.512Z,1492186989.512 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:10.308Z,1492186990.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:11.108Z,1492186991.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:11.868Z,1492186991.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:12.664Z,1492186992.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:13.460Z,1492186993.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:13.868Z,1492186993.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:14.664Z,1492186994.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:15.404Z,1492186995.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:51.460Z,1492187031.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:23:52.256Z,1492187032.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:24:14.064Z,1492187054.064 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:24:14.064Z,1492187054.064 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 5
2017-04-14T16:24:14.064Z,1492187054.064 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:24:14.078Z,1492187054.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:24:14.463Z,1492187054.463 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:24:14.463Z,1492187054.463 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 5
2017-04-14T16:24:14.901Z,1492187054.901 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:24:14.902Z,1492187054.902 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:24:14.902Z,1492187054.902 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:24:39.617Z,1492187079.617 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:24:39.618Z,1492187079.618 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:24:39.618Z,1492187079.618 [BPC1](ERROR): Data Fault
2017-04-14T16:24:39.672Z,1492187079.672 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:24:40.951Z,1492187080.951 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:24:40.952Z,1492187080.952 [BPC1] No Fault, FailCount= 1
2017-04-14T16:25:15.360Z,1492187115.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:25:16.157Z,1492187116.157 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:25:29.288Z,1492187129.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:25:30.084Z,1492187130.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:26:40.727Z,1492187200.727 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:26:40.727Z,1492187200.727 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:26:40.727Z,1492187200.727 [BPC1](ERROR): Communications Fault
2017-04-14T16:26:40.848Z,1492187200.848 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:26:41.988Z,1492187201.988 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:26:41.988Z,1492187201.988 [BPC1] No Fault, FailCount= 1
2017-04-14T16:26:53.161Z,1492187213.161 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:26:53.956Z,1492187213.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:27:07.936Z,1492187227.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:27:08.732Z,1492187228.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:27:15.092Z,1492187235.092 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:27:15.092Z,1492187235.092 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 6
2017-04-14T16:27:15.092Z,1492187235.092 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:27:15.119Z,1492187235.119 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:27:15.447Z,1492187235.447 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:27:15.447Z,1492187235.447 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 6
2017-04-14T16:27:15.804Z,1492187235.804 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:27:15.805Z,1492187235.805 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:27:15.805Z,1492187235.805 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:27:49.853Z,1492187269.853 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:27:49.853Z,1492187269.853 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:27:49.853Z,1492187269.853 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:27:49.853Z,1492187269.853 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:27:50.219Z,1492187270.219 [Default:CheckIn:D] Stopped
2017-04-14T16:27:50.219Z,1492187270.219 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:27:50.623Z,1492187270.623 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 781.748372 min 
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn:E] Stopped
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn] Stopped
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn](INFO): Running loop #114
2017-04-14T16:27:50.624Z,1492187270.624 [Default:CheckIn] Running Loop=114
2017-04-14T16:27:50.624Z,1492187270.625 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:27:50.625Z,1492187270.625 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:27:57.942Z,1492187277.941 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:27:57.942Z,1492187277.942 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:27:57.942Z,1492187277.942 [BPC1](ERROR): Communications Fault
2017-04-14T16:27:58.027Z,1492187278.027 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:27:58.072Z,1492187278.072 [NAL9602](INFO): Powering up
2017-04-14T16:27:58.940Z,1492187278.940 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:27:58.940Z,1492187278.940 [BPC1] No Fault, FailCount= 1
2017-04-14T16:28:09.262Z,1492187289.262 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:28:10.049Z,1492187290.049 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-04-14T16:28:10.049Z,1492187290.049 [NAL9602] Data Fault, FailCount= 1
2017-04-14T16:28:10.049Z,1492187290.049 [NAL9602](ERROR): Data Fault
2017-04-14T16:28:10.216Z,1492187290.216 [CBIT](ERROR): Data Fault in component: NAL9602
2017-04-14T16:28:10.452Z,1492187290.453 [NAL9602](INFO): Powering down
2017-04-14T16:28:11.362Z,1492187291.362 [CBIT](INFO): Clearing failed state for component NAL9602
2017-04-14T16:28:11.362Z,1492187291.362 [NAL9602] No Fault, FailCount= 1
2017-04-14T16:28:15.657Z,1492187295.657 [NAL9602](INFO): Powering up NAL9602
2017-04-14T16:28:26.861Z,1492187306.861 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:28:31.024Z,1492187311.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:28:31.820Z,1492187311.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:28:37.752Z,1492187317.752 [CommandLine](IMPORTANT): got command burn 5.000000
2017-04-14T16:28:42.771Z,1492187322.771 [CommandLine](IMPORTANT): Deactivating dropweight wire
2017-04-14T16:28:45.042Z,1492187325.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:28:45.836Z,1492187325.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:28:57.499Z,1492187337.499 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:28:57.499Z,1492187337.499 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:28:57.499Z,1492187337.499 [BPC1](ERROR): Communications Fault
2017-04-14T16:28:57.531Z,1492187337.531 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:28:58.742Z,1492187338.742 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:28:58.742Z,1492187338.742 [BPC1] No Fault, FailCount= 1
2017-04-14T16:29:04.666Z,1492187344.666 [NAL9602](INFO): SBD MO Status=2, MOMSN=2205, MT Status=2, MTMSN=0
2017-04-14T16:29:04.666Z,1492187344.666 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:29:14.274Z,1492187354.274 [NAL9602](INFO): SBD MO Status=0, MOMSN=2205, MT Status=0, MTMSN=0
2017-04-14T16:29:14.274Z,1492187354.274 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:29:15.468Z,1492187355.468 [NAL9602](INFO): GPS fix at 20170414T163027: (36.802310, -121.787258)
2017-04-14T16:29:15.540Z,1492187355.540 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:29:15.540Z,1492187355.540 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:29:20.620Z,1492187360.620 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0460.lzma
2017-04-14T16:29:21.411Z,1492187361.411 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0460.lzma.bak
2017-04-14T16:29:21.411Z,1492187361.411 [DataOverHttps](INFO): SBD MOMSN=4886438
2017-04-14T16:29:25.604Z,1492187365.604 [NAL9602](INFO): Powering down
2017-04-14T16:29:30.992Z,1492187370.992 [DataOverHttps](INFO): Sending 281 bytes from file Logs/20170414T032153/Express0461.lzma
2017-04-14T16:29:31.775Z,1492187371.775 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0461.lzma.bak
2017-04-14T16:29:31.775Z,1492187371.775 [DataOverHttps](INFO): SBD MOMSN=4886441
2017-04-14T16:29:32.267Z,1492187372.267 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:29:32.267Z,1492187372.267 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:29:32.267Z,1492187372.267 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:29:56.635Z,1492187396.635 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:29:56.636Z,1492187396.635 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:29:56.636Z,1492187396.635 [BPC1](ERROR): Communications Fault
2017-04-14T16:29:56.717Z,1492187396.717 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:29:57.879Z,1492187397.879 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:29:57.880Z,1492187397.880 [BPC1] No Fault, FailCount= 1
2017-04-14T16:30:09.640Z,1492187409.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:30:10.436Z,1492187410.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:30:15.890Z,1492187415.890 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:30:15.890Z,1492187415.890 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:30:15.890Z,1492187415.890 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:30:15.920Z,1492187415.921 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:30:16.373Z,1492187416.373 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:30:16.373Z,1492187416.374 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:30:16.692Z,1492187416.692 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:30:16.693Z,1492187416.693 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:30:16.693Z,1492187416.693 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:30:23.620Z,1492187423.620 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:30:24.416Z,1492187424.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:30:59.500Z,1492187459.500 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:00.296Z,1492187460.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:00.700Z,1492187460.700 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:01.516Z,1492187461.516 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:02.312Z,1492187462.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:02.716Z,1492187462.716 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:03.536Z,1492187463.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:04.334Z,1492187464.334 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:04.768Z,1492187464.768 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:05.564Z,1492187465.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:06.360Z,1492187466.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:07.124Z,1492187467.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:07.920Z,1492187467.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:24.653Z,1492187484.653 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:31:24.653Z,1492187484.653 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:31:24.653Z,1492187484.653 [BPC1](ERROR): Communications Fault
2017-04-14T16:31:24.708Z,1492187484.708 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:31:25.929Z,1492187485.929 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:31:25.929Z,1492187485.929 [BPC1] No Fault, FailCount= 1
2017-04-14T16:31:47.496Z,1492187507.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:31:48.292Z,1492187508.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:32:01.472Z,1492187521.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:32:02.268Z,1492187522.268 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:32:54.712Z,1492187574.712 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:33:16.993Z,1492187596.993 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:33:16.993Z,1492187596.993 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:33:16.993Z,1492187596.993 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:33:17.024Z,1492187597.024 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:33:17.446Z,1492187597.446 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:33:17.446Z,1492187597.446 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:33:17.819Z,1492187597.819 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:33:17.823Z,1492187597.823 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:33:17.824Z,1492187597.824 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:33:24.552Z,1492187604.552 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:33:25.348Z,1492187605.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:33:38.536Z,1492187618.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:33:39.332Z,1492187619.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:33:53.938Z,1492187633.938 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:33:53.938Z,1492187633.938 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:33:53.938Z,1492187633.938 [BPC1](ERROR): Communications Fault
2017-04-14T16:33:53.969Z,1492187633.969 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:33:55.228Z,1492187635.227 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:33:55.228Z,1492187635.227 [BPC1] No Fault, FailCount= 1
2017-04-14T16:34:11.145Z,1492187651.145 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:34:11.146Z,1492187651.145 [BPC1] Communications Fault, FailCount= 2
2017-04-14T16:34:11.146Z,1492187651.146 [BPC1](ERROR): Communications Fault
2017-04-14T16:34:11.225Z,1492187651.225 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:34:12.392Z,1492187652.392 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:34:12.392Z,1492187652.392 [BPC1] No Fault, FailCount= 2
2017-04-14T16:34:32.772Z,1492187672.772 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:34:32.772Z,1492187672.772 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:34:32.772Z,1492187672.772 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:34:32.772Z,1492187672.772 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:34:33.177Z,1492187673.177 [Default:CheckIn:D] Stopped
2017-04-14T16:34:33.177Z,1492187673.177 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:34:33.561Z,1492187673.561 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 788.464323 min 
2017-04-14T16:34:33.561Z,1492187673.561 [Default:CheckIn:E] Stopped
2017-04-14T16:34:33.561Z,1492187673.561 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:34:33.561Z,1492187673.561 [Default:CheckIn] Stopped
2017-04-14T16:34:33.562Z,1492187673.562 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:34:33.562Z,1492187673.562 [Default:CheckIn](INFO): Running loop #115
2017-04-14T16:34:33.562Z,1492187673.562 [Default:CheckIn] Running Loop=115
2017-04-14T16:34:33.562Z,1492187673.562 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:34:33.562Z,1492187673.562 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:34:38.603Z,1492187678.603 [NAL9602](INFO): Powering up
2017-04-14T16:34:49.781Z,1492187689.781 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:35:03.188Z,1492187703.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:35:03.984Z,1492187703.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:35:08.974Z,1492187708.974 [NAL9602](INFO): SBD MO Status=2, MOMSN=2206, MT Status=2, MTMSN=0
2017-04-14T16:35:08.974Z,1492187708.974 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:35:17.176Z,1492187717.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:35:17.972Z,1492187717.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:35:38.014Z,1492187738.014 [PNI_TCM](ERROR): CRC does not match. Expected:0x64916 got:0x60423
2017-04-14T16:35:41.510Z,1492187741.510 [NAL9602](INFO): SBD MO Status=2, MOMSN=2206, MT Status=2, MTMSN=0
2017-04-14T16:35:41.510Z,1492187741.510 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:35:57.929Z,1492187757.929 [NAL9602](INFO): SBD MO Status=0, MOMSN=2206, MT Status=0, MTMSN=0
2017-04-14T16:35:57.929Z,1492187757.929 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:35:59.116Z,1492187759.116 [NAL9602](INFO): GPS fix at 20170414T163711: (36.802699, -121.786947)
2017-04-14T16:35:59.198Z,1492187759.197 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:35:59.198Z,1492187759.198 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:36:04.090Z,1492187764.090 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0464.lzma
2017-04-14T16:36:04.883Z,1492187764.883 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0464.lzma.bak
2017-04-14T16:36:04.884Z,1492187764.884 [DataOverHttps](INFO): SBD MOMSN=4886483
2017-04-14T16:36:09.076Z,1492187769.076 [NAL9602](INFO): Powering down
2017-04-14T16:36:15.119Z,1492187775.119 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0465.lzma
2017-04-14T16:36:15.903Z,1492187775.903 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0465.lzma.bak
2017-04-14T16:36:15.903Z,1492187775.903 [DataOverHttps](INFO): SBD MOMSN=4886486
2017-04-14T16:36:16.429Z,1492187776.429 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:36:16.430Z,1492187776.430 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:36:16.430Z,1492187776.430 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:36:20.399Z,1492187780.399 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:36:20.399Z,1492187780.399 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:36:20.399Z,1492187780.399 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:36:20.466Z,1492187780.466 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:36:20.586Z,1492187780.586 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:36:20.586Z,1492187780.586 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:36:20.991Z,1492187780.991 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:36:20.992Z,1492187780.992 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:36:20.992Z,1492187780.992 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:36:55.024Z,1492187815.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:36:55.820Z,1492187815.820 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:37:08.216Z,1492187828.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:37:09.012Z,1492187829.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:37:48.988Z,1492187868.988 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T16:37:48.988Z,1492187868.988 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:37:48.988Z,1492187868.989 [BPC1](ERROR): Data Fault
2017-04-14T16:37:49.073Z,1492187869.073 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:37:50.243Z,1492187870.243 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:37:50.243Z,1492187870.243 [BPC1] No Fault, FailCount= 1
2017-04-14T16:37:56.581Z,1492187876.581 [PNI_TCM](ERROR): CRC does not match. Expected:0x45494 got:0x56048
2017-04-14T16:38:32.084Z,1492187912.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:38:32.880Z,1492187912.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:38:37.873Z,1492187917.873 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:38:37.873Z,1492187917.873 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:38:37.873Z,1492187917.873 [BPC1](ERROR): Communications Fault
2017-04-14T16:38:37.904Z,1492187917.904 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:38:39.110Z,1492187919.110 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:38:39.111Z,1492187919.111 [BPC1] No Fault, FailCount= 1
2017-04-14T16:38:46.852Z,1492187926.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:38:47.648Z,1492187927.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:39:21.340Z,1492187961.340 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:39:21.340Z,1492187961.340 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:39:21.340Z,1492187961.340 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:39:21.354Z,1492187961.354 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:39:21.711Z,1492187961.711 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:39:21.711Z,1492187961.711 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:39:22.137Z,1492187962.137 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:39:22.138Z,1492187962.138 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:39:22.138Z,1492187962.138 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:39:58.320Z,1492187998.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:39:59.116Z,1492187999.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:40:10.762Z,1492188010.762 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:40:11.560Z,1492188011.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:40:24.692Z,1492188024.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:40:25.492Z,1492188025.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:41:17.101Z,1492188077.101 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:41:17.101Z,1492188077.102 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:41:17.102Z,1492188077.102 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:41:17.102Z,1492188077.102 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:41:17.523Z,1492188077.523 [Default:CheckIn:D] Stopped
2017-04-14T16:41:17.523Z,1492188077.523 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:41:21.977Z,1492188081.977 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 795.203190 min 
2017-04-14T16:41:21.977Z,1492188081.977 [Default:CheckIn:E] Stopped
2017-04-14T16:41:21.977Z,1492188081.977 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:41:21.977Z,1492188081.977 [Default:CheckIn] Stopped
2017-04-14T16:41:21.978Z,1492188081.977 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:41:21.978Z,1492188081.978 [Default:CheckIn](INFO): Running loop #116
2017-04-14T16:41:21.978Z,1492188081.978 [Default:CheckIn] Running Loop=116
2017-04-14T16:41:21.978Z,1492188081.978 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:41:21.978Z,1492188081.978 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:41:22.424Z,1492188082.424 [NAL9602](INFO): Powering up
2017-04-14T16:41:33.637Z,1492188093.637 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:41:52.025Z,1492188112.026 [NAL9602](INFO): SBD MO Status=0, MOMSN=2207, MT Status=0, MTMSN=0
2017-04-14T16:41:52.026Z,1492188112.026 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:42:02.556Z,1492188122.556 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:42:03.352Z,1492188123.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:42:05.234Z,1492188125.234 [NAL9602](INFO): GPS fix at 20170414T164318: (36.802735, -121.786966)
2017-04-14T16:42:05.337Z,1492188125.337 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:42:05.337Z,1492188125.337 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:42:13.376Z,1492188133.376 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0468.lzma
2017-04-14T16:42:14.143Z,1492188134.143 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0468.lzma.bak
2017-04-14T16:42:14.143Z,1492188134.143 [DataOverHttps](INFO): SBD MOMSN=4886491
2017-04-14T16:42:16.536Z,1492188136.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:42:17.332Z,1492188137.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:42:18.933Z,1492188138.933 [NAL9602](INFO): Powering down
2017-04-14T16:42:24.787Z,1492188144.787 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:42:24.787Z,1492188144.787 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:42:24.787Z,1492188144.787 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:42:24.830Z,1492188144.830 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:42:24.848Z,1492188144.848 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0469.lzma
2017-04-14T16:42:24.981Z,1492188144.981 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:42:24.981Z,1492188144.981 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:42:25.323Z,1492188145.323 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:42:25.327Z,1492188145.328 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:42:25.328Z,1492188145.328 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:42:25.651Z,1492188145.651 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0469.lzma.bak
2017-04-14T16:42:25.651Z,1492188145.651 [DataOverHttps](INFO): SBD MOMSN=4886494
2017-04-14T16:42:26.966Z,1492188146.967 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:42:26.967Z,1492188146.967 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:42:26.967Z,1492188146.967 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:42:55.192Z,1492188175.192 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:43:40.384Z,1492188220.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:43:41.180Z,1492188221.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:44:12.085Z,1492188252.085 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:44:12.085Z,1492188252.085 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:44:12.085Z,1492188252.085 [BPC1](ERROR): Data Fault
2017-04-14T16:44:12.172Z,1492188252.172 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:44:13.341Z,1492188253.341 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:44:13.341Z,1492188253.341 [BPC1] No Fault, FailCount= 1
2017-04-14T16:45:18.236Z,1492188318.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:45:19.032Z,1492188319.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:45:25.420Z,1492188325.420 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:45:25.420Z,1492188325.420 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:45:25.420Z,1492188325.420 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:45:25.455Z,1492188325.455 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:45:25.760Z,1492188325.760 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:45:25.760Z,1492188325.760 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:45:26.139Z,1492188326.139 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:45:26.140Z,1492188326.139 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:45:26.140Z,1492188326.140 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:45:32.216Z,1492188332.216 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:45:33.012Z,1492188333.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:47:10.060Z,1492188430.060 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:47:10.856Z,1492188430.856 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:47:24.042Z,1492188444.042 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:47:24.836Z,1492188444.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:47:27.425Z,1492188447.425 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:47:27.425Z,1492188447.425 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:47:27.425Z,1492188447.425 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:47:27.425Z,1492188447.425 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:47:27.832Z,1492188447.832 [Default:CheckIn:D] Stopped
2017-04-14T16:47:27.832Z,1492188447.832 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 801.375195 min 
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn:E] Stopped
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn] Stopped
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:47:31.417Z,1492188451.417 [Default:CheckIn](INFO): Running loop #117
2017-04-14T16:47:31.417Z,1492188451.418 [Default:CheckIn] Running Loop=117
2017-04-14T16:47:31.418Z,1492188451.418 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:47:31.418Z,1492188451.418 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:47:31.850Z,1492188451.850 [NAL9602](INFO): Powering up
2017-04-14T16:47:43.045Z,1492188463.045 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:48:11.458Z,1492188491.458 [NAL9602](INFO): SBD MO Status=2, MOMSN=2208, MT Status=2, MTMSN=0
2017-04-14T16:48:11.458Z,1492188491.458 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T16:48:17.877Z,1492188497.877 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:48:17.877Z,1492188497.878 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:48:17.878Z,1492188497.878 [BPC1](ERROR): Communications Fault
2017-04-14T16:48:17.909Z,1492188497.909 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:48:19.114Z,1492188499.114 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:48:19.114Z,1492188499.114 [BPC1] No Fault, FailCount= 1
2017-04-14T16:48:23.103Z,1492188503.103 [NAL9602](INFO): SBD MO Status=0, MOMSN=2208, MT Status=0, MTMSN=0
2017-04-14T16:48:23.122Z,1492188503.122 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:48:24.277Z,1492188504.277 [NAL9602](INFO): GPS fix at 20170414T164937: (36.802740, -121.786920)
2017-04-14T16:48:24.357Z,1492188504.357 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:48:24.357Z,1492188504.358 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:48:30.168Z,1492188510.168 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:48:30.168Z,1492188510.168 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:48:30.168Z,1492188510.168 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:48:30.182Z,1492188510.182 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:48:30.252Z,1492188510.252 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0472.lzma
2017-04-14T16:48:30.376Z,1492188510.376 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:48:30.376Z,1492188510.376 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:48:30.747Z,1492188510.747 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:48:30.748Z,1492188510.748 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:48:30.748Z,1492188510.748 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:48:31.019Z,1492188511.019 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0472.lzma.bak
2017-04-14T16:48:31.020Z,1492188511.020 [DataOverHttps](INFO): SBD MOMSN=4886498
2017-04-14T16:48:35.405Z,1492188515.405 [NAL9602](INFO): Powering down
2017-04-14T16:48:41.168Z,1492188521.168 [DataOverHttps](INFO): Sending 121 bytes from file Logs/20170414T032153/Express0473.lzma
2017-04-14T16:48:41.951Z,1492188521.951 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0473.lzma.bak
2017-04-14T16:48:41.951Z,1492188521.951 [DataOverHttps](INFO): SBD MOMSN=4886501
2017-04-14T16:48:42.460Z,1492188522.460 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:48:42.461Z,1492188522.461 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:48:42.461Z,1492188522.461 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:48:47.900Z,1492188527.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:48:48.696Z,1492188528.696 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:49:00.414Z,1492188540.414 [BPC1](ERROR): Failed to parse message.
2017-04-14T16:49:00.414Z,1492188540.414 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:49:00.414Z,1492188540.414 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:49:00.414Z,1492188540.414 [BPC1](ERROR): Data Fault
2017-04-14T16:49:00.446Z,1492188540.446 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:49:01.735Z,1492188541.736 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:49:01.736Z,1492188541.736 [BPC1] No Fault, FailCount= 1
2017-04-14T16:49:01.872Z,1492188541.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:49:02.668Z,1492188542.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:49:52.277Z,1492188592.277 [PNI_TCM](ERROR): CRC does not match. Expected:0x20908 got:0x51970
2017-04-14T16:50:38.936Z,1492188638.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:50:39.732Z,1492188639.732 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:50:53.788Z,1492188653.788 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:50:54.584Z,1492188654.584 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:51:30.989Z,1492188690.989 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:51:30.989Z,1492188690.989 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:51:30.989Z,1492188690.989 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:51:31.004Z,1492188691.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:51:31.364Z,1492188691.364 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:51:31.364Z,1492188691.364 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:51:31.746Z,1492188691.746 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:51:31.747Z,1492188691.747 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:51:31.747Z,1492188691.747 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:51:40.914Z,1492188700.914 [PNI_TCM](ERROR): CRC does not match. Expected:0x10741 got:0x49086
2017-04-14T16:52:30.844Z,1492188750.844 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:52:31.640Z,1492188751.640 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:52:50.411Z,1492188770.411 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:52:50.411Z,1492188770.411 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:52:50.411Z,1492188770.411 [BPC1](ERROR): Communications Fault
2017-04-14T16:52:50.510Z,1492188770.510 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:52:51.413Z,1492188771.413 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:52:51.413Z,1492188771.413 [BPC1] No Fault, FailCount= 1
2017-04-14T16:52:55.423Z,1492188775.423 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T16:53:21.769Z,1492188801.769 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:53:21.769Z,1492188801.769 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:53:21.769Z,1492188801.769 [BPC1](ERROR): Communications Fault
2017-04-14T16:53:21.820Z,1492188801.820 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:53:23.038Z,1492188803.039 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:53:23.039Z,1492188803.039 [BPC1] No Fault, FailCount= 1
2017-04-14T16:53:43.040Z,1492188823.040 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:53:43.070Z,1492188823.070 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:53:43.070Z,1492188823.070 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:53:43.070Z,1492188823.070 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:53:43.070Z,1492188823.070 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:53:43.417Z,1492188823.417 [Default:CheckIn:D] Stopped
2017-04-14T16:53:43.417Z,1492188823.417 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:53:43.803Z,1492188823.803 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 807.634961 min 
2017-04-14T16:53:43.803Z,1492188823.803 [Default:CheckIn:E] Stopped
2017-04-14T16:53:43.803Z,1492188823.803 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:53:43.803Z,1492188823.803 [Default:CheckIn] Stopped
2017-04-14T16:53:43.804Z,1492188823.804 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:53:43.804Z,1492188823.804 [Default:CheckIn](INFO): Running loop #118
2017-04-14T16:53:43.804Z,1492188823.804 [Default:CheckIn] Running Loop=118
2017-04-14T16:53:43.804Z,1492188823.804 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:53:43.804Z,1492188823.804 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:53:43.836Z,1492188823.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:53:47.791Z,1492188827.792 [NAL9602](INFO): Powering up
2017-04-14T16:53:58.717Z,1492188838.717 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:54:19.118Z,1492188859.118 [NAL9602](INFO): SBD MO Status=0, MOMSN=2209, MT Status=0, MTMSN=0
2017-04-14T16:54:19.118Z,1492188859.118 [NAL9602](INFO): No messages in MT queue
2017-04-14T16:54:20.329Z,1492188860.329 [NAL9602](INFO): GPS fix at 20170414T165534: (36.802711, -121.786928)
2017-04-14T16:54:20.398Z,1492188860.398 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T16:54:20.398Z,1492188860.398 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T16:54:23.388Z,1492188863.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:54:24.185Z,1492188864.185 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:54:25.495Z,1492188865.495 [DataOverHttps](INFO): Sending 80 bytes from file Logs/20170414T032153/Courier0476.lzma
2017-04-14T16:54:26.239Z,1492188866.239 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0476.lzma.bak
2017-04-14T16:54:26.239Z,1492188866.239 [DataOverHttps](INFO): SBD MOMSN=4886505
2017-04-14T16:54:30.563Z,1492188870.563 [NAL9602](INFO): Powering down
2017-04-14T16:54:31.962Z,1492188871.962 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:54:31.962Z,1492188871.962 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T16:54:31.962Z,1492188871.962 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:54:32.020Z,1492188872.020 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:54:32.396Z,1492188872.396 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:54:32.396Z,1492188872.396 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T16:54:35.790Z,1492188875.790 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:54:35.790Z,1492188875.790 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:54:35.790Z,1492188875.790 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:54:36.259Z,1492188876.259 [DataOverHttps](INFO): Sending 122 bytes from file Logs/20170414T032153/Express0477.lzma
2017-04-14T16:54:37.042Z,1492188877.042 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0477.lzma.bak
2017-04-14T16:54:37.042Z,1492188877.042 [DataOverHttps](INFO): SBD MOMSN=4886508
2017-04-14T16:54:37.570Z,1492188877.570 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T16:54:37.570Z,1492188877.570 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T16:54:37.570Z,1492188877.570 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T16:56:14.458Z,1492188974.458 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:56:15.260Z,1492188975.260 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:57:09.299Z,1492189029.299 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:57:09.315Z,1492189029.315 [BPC1] Data Fault, FailCount= 1
2017-04-14T16:57:09.315Z,1492189029.315 [BPC1](ERROR): Data Fault
2017-04-14T16:57:09.368Z,1492189029.368 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:57:10.553Z,1492189030.553 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:57:10.553Z,1492189030.553 [BPC1] No Fault, FailCount= 1
2017-04-14T16:57:35.802Z,1492189055.802 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T16:57:35.803Z,1492189055.803 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T16:57:35.803Z,1492189055.803 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T16:57:35.849Z,1492189055.849 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T16:57:36.171Z,1492189056.171 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T16:57:36.171Z,1492189056.171 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T16:57:36.523Z,1492189056.523 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T16:57:36.556Z,1492189056.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T16:57:36.556Z,1492189056.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T16:57:58.183Z,1492189078.183 [BPC1](ERROR): Failed to receive battery data
2017-04-14T16:57:58.183Z,1492189078.183 [BPC1] Communications Fault, FailCount= 1
2017-04-14T16:57:58.183Z,1492189078.183 [BPC1](ERROR): Communications Fault
2017-04-14T16:57:58.250Z,1492189078.250 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T16:57:59.436Z,1492189079.436 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:57:59.436Z,1492189079.436 [BPC1] No Fault, FailCount= 1
2017-04-14T16:58:06.256Z,1492189086.256 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:58:07.052Z,1492189087.052 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:58:10.582Z,1492189090.582 [BPC1](ERROR): Failed to parse message.
2017-04-14T16:58:10.582Z,1492189090.582 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T16:58:10.582Z,1492189090.582 [BPC1] Data Fault, FailCount= 2
2017-04-14T16:58:10.582Z,1492189090.582 [BPC1](ERROR): Data Fault
2017-04-14T16:58:10.664Z,1492189090.664 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T16:58:11.865Z,1492189091.865 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T16:58:11.865Z,1492189091.865 [BPC1] No Fault, FailCount= 2
2017-04-14T16:59:38.066Z,1492189178.066 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T16:59:38.067Z,1492189178.066 [Default:CheckIn:C.Wait] Stopped
2017-04-14T16:59:38.067Z,1492189178.067 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T16:59:38.067Z,1492189178.067 [Default:CheckIn:D] Running Loop=1
2017-04-14T16:59:38.542Z,1492189178.542 [Default:CheckIn:D] Stopped
2017-04-14T16:59:38.542Z,1492189178.542 [Default:CheckIn:E] Running Loop=1
2017-04-14T16:59:38.920Z,1492189178.920 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 813.553711 min 
2017-04-14T16:59:38.920Z,1492189178.921 [Default:CheckIn:E] Stopped
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn] Stopped
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn](INFO): Running loop #119
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn] Running Loop=119
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T16:59:38.921Z,1492189178.921 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T16:59:43.607Z,1492189183.606 [NAL9602](INFO): Powering up
2017-04-14T16:59:54.417Z,1492189194.417 [NAL9602](INFO): NAL9602 initialized
2017-04-14T16:59:58.084Z,1492189198.084 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T16:59:58.880Z,1492189198.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:00:10.814Z,1492189210.814 [NAL9602](INFO): SBD MO Status=2, MOMSN=2210, MT Status=2, MTMSN=0
2017-04-14T17:00:10.814Z,1492189210.814 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T17:00:12.056Z,1492189212.056 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:00:12.852Z,1492189212.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:00:18.014Z,1492189218.014 [NAL9602](INFO): SBD MO Status=0, MOMSN=2210, MT Status=0, MTMSN=0
2017-04-14T17:00:18.014Z,1492189218.014 [NAL9602](INFO): No messages in MT queue
2017-04-14T17:00:19.216Z,1492189219.216 [NAL9602](INFO): GPS fix at 20170414T170133: (36.806677, -121.785314)
2017-04-14T17:00:19.287Z,1492189219.286 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T17:00:19.287Z,1492189219.287 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T17:00:24.536Z,1492189224.536 [DataOverHttps](INFO): Sending 63 bytes from file Logs/20170414T032153/Courier0480.lzma
2017-04-14T17:00:25.335Z,1492189225.335 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0480.lzma.bak
2017-04-14T17:00:25.335Z,1492189225.335 [DataOverHttps](INFO): SBD MOMSN=4886512
2017-04-14T17:00:29.540Z,1492189229.540 [NAL9602](INFO): Powering down
2017-04-14T17:00:34.853Z,1492189234.853 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0481.lzma
2017-04-14T17:00:35.623Z,1492189235.623 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0481.lzma.bak
2017-04-14T17:00:35.623Z,1492189235.623 [DataOverHttps](INFO): SBD MOMSN=4886515
2017-04-14T17:00:36.120Z,1492189236.120 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T17:00:36.120Z,1492189236.120 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T17:00:36.120Z,1492189236.120 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T17:00:40.124Z,1492189240.124 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:00:40.124Z,1492189240.125 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T17:00:40.125Z,1492189240.125 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:00:40.139Z,1492189240.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:00:40.308Z,1492189240.308 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:00:40.308Z,1492189240.308 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T17:00:40.645Z,1492189240.645 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:00:40.645Z,1492189240.645 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:00:40.646Z,1492189240.645 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:01:49.912Z,1492189309.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:50.708Z,1492189310.708 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:56.564Z,1492189316.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:57.362Z,1492189317.362 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:57.784Z,1492189317.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:58.580Z,1492189318.580 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:59.377Z,1492189319.378 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:01:59.784Z,1492189319.784 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:02:03.908Z,1492189323.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:02:04.705Z,1492189324.705 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:02:23.020Z,1492189343.020 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:02:23.728Z,1492189343.728 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:02:55.516Z,1492189375.516 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T17:03:40.875Z,1492189420.875 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:03:40.875Z,1492189420.875 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T17:03:40.875Z,1492189420.875 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:03:40.888Z,1492189420.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:03:41.398Z,1492189421.398 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:03:41.398Z,1492189421.398 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T17:03:41.695Z,1492189421.695 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:03:41.696Z,1492189421.696 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:03:41.696Z,1492189421.696 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:03:41.740Z,1492189421.740 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:03:42.536Z,1492189422.536 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:03:55.729Z,1492189435.729 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:03:56.524Z,1492189436.524 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:00.888Z,1492189440.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:01.564Z,1492189441.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:02.360Z,1492189442.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:03.158Z,1492189443.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:03.592Z,1492189443.592 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:04.388Z,1492189444.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:05.198Z,1492189445.198 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:05.604Z,1492189445.604 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:10.496Z,1492189450.496 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:11.300Z,1492189451.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:14.836Z,1492189454.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:15.564Z,1492189455.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:16.360Z,1492189456.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:17.157Z,1492189457.158 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:17.568Z,1492189457.568 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:18.364Z,1492189458.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:19.160Z,1492189459.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:04:19.564Z,1492189459.564 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:05:06.836Z,1492189506.836 [PNI_TCM](ERROR): CRC does not match. Expected:0x64277 got:0x51175
2017-04-14T17:05:26.848Z,1492189526.848 [PNI_TCM](ERROR): CRC does not match. Expected:0x51406 got:0x25880
2017-04-14T17:05:36.907Z,1492189536.907 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T17:05:36.908Z,1492189536.908 [Default:CheckIn:C.Wait] Stopped
2017-04-14T17:05:36.908Z,1492189536.908 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T17:05:36.908Z,1492189536.908 [Default:CheckIn:D] Running Loop=1
2017-04-14T17:05:37.304Z,1492189537.304 [Default:CheckIn:D] Stopped
2017-04-14T17:05:37.304Z,1492189537.304 [Default:CheckIn:E] Running Loop=1
2017-04-14T17:05:40.822Z,1492189540.822 [BPC1](ERROR): Failed to receive battery data
2017-04-14T17:05:40.822Z,1492189540.822 [BPC1] Communications Fault, FailCount= 1
2017-04-14T17:05:40.822Z,1492189540.822 [BPC1](ERROR): Communications Fault
2017-04-14T17:05:40.894Z,1492189540.894 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 819.533073 min 
2017-04-14T17:05:40.894Z,1492189540.894 [Default:CheckIn:E] Stopped
2017-04-14T17:05:40.894Z,1492189540.894 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T17:05:40.894Z,1492189540.894 [Default:CheckIn] Stopped
2017-04-14T17:05:40.895Z,1492189540.895 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T17:05:40.895Z,1492189540.895 [Default:CheckIn](INFO): Running loop #120
2017-04-14T17:05:40.895Z,1492189540.895 [Default:CheckIn] Running Loop=120
2017-04-14T17:05:40.895Z,1492189540.895 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T17:05:40.895Z,1492189540.895 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T17:05:40.916Z,1492189540.917 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T17:05:41.332Z,1492189541.332 [NAL9602](INFO): Powering up
2017-04-14T17:05:41.851Z,1492189541.851 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:05:41.851Z,1492189541.852 [BPC1] No Fault, FailCount= 1
2017-04-14T17:05:48.312Z,1492189548.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:05:49.109Z,1492189549.109 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:05:52.534Z,1492189552.534 [NAL9602](INFO): NAL9602 initialized
2017-04-14T17:06:02.304Z,1492189562.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:06:03.100Z,1492189563.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:06:41.789Z,1492189601.789 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:06:41.789Z,1492189601.789 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T17:06:41.789Z,1492189601.789 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:06:41.803Z,1492189601.803 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:06:42.144Z,1492189602.144 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:06:42.144Z,1492189602.144 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T17:06:42.549Z,1492189602.549 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:06:42.550Z,1492189602.550 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:06:42.550Z,1492189602.550 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:07:41.324Z,1492189661.324 [BPC1](ERROR): Failed to receive battery data
2017-04-14T17:07:41.324Z,1492189661.324 [BPC1] Communications Fault, FailCount= 1
2017-04-14T17:07:41.324Z,1492189661.324 [BPC1](ERROR): Communications Fault
2017-04-14T17:07:41.408Z,1492189661.408 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T17:07:42.470Z,1492189662.470 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:07:42.470Z,1492189662.470 [BPC1] No Fault, FailCount= 1
2017-04-14T17:07:54.140Z,1492189674.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:07:54.936Z,1492189674.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:08:08.120Z,1492189688.121 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:08:08.916Z,1492189688.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:08:30.398Z,1492189710.398 [NAL9602](INFO): SBD MO Status=0, MOMSN=2211, MT Status=0, MTMSN=0
2017-04-14T17:08:30.398Z,1492189710.398 [NAL9602](INFO): No messages in MT queue
2017-04-14T17:08:31.609Z,1492189711.609 [NAL9602](INFO): GPS fix at 20170414T170947: (36.803463, -121.811119)
2017-04-14T17:08:31.685Z,1492189711.685 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T17:08:31.685Z,1492189711.685 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T17:08:36.517Z,1492189716.517 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0484.lzma
2017-04-14T17:08:37.319Z,1492189717.319 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0484.lzma.bak
2017-04-14T17:08:37.319Z,1492189717.319 [DataOverHttps](INFO): SBD MOMSN=4886519
2017-04-14T17:08:41.620Z,1492189721.620 [NAL9602](INFO): Powering down
2017-04-14T17:08:47.012Z,1492189727.012 [DataOverHttps](INFO): Sending 136 bytes from file Logs/20170414T032153/Express0485.lzma
2017-04-14T17:08:47.771Z,1492189727.771 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0485.lzma.bak
2017-04-14T17:08:47.771Z,1492189727.771 [DataOverHttps](INFO): SBD MOMSN=4886522
2017-04-14T17:08:48.264Z,1492189728.264 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T17:08:48.264Z,1492189728.264 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T17:08:48.264Z,1492189728.264 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T17:09:42.776Z,1492189782.776 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:09:42.777Z,1492189782.777 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T17:09:42.777Z,1492189782.777 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:09:42.791Z,1492189782.791 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:09:43.188Z,1492189783.188 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:09:43.188Z,1492189783.188 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T17:09:43.556Z,1492189783.556 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:09:43.556Z,1492189783.556 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:09:43.557Z,1492189783.557 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:09:45.196Z,1492189785.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:09:46.005Z,1492189786.005 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:10:01.492Z,1492189801.492 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:10:02.288Z,1492189802.288 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:28.148Z,1492189888.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:28.900Z,1492189888.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:42.112Z,1492189902.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:42.876Z,1492189902.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:43.672Z,1492189903.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:44.468Z,1492189904.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:44.876Z,1492189904.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:45.672Z,1492189905.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:46.468Z,1492189906.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:46.880Z,1492189906.880 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:47.676Z,1492189907.676 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:48.472Z,1492189908.472 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:48.876Z,1492189908.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:49.133Z,1492189909.133 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T17:11:49.133Z,1492189909.133 [BPC1] Data Fault, FailCount= 1
2017-04-14T17:11:49.133Z,1492189909.134 [BPC1](ERROR): Data Fault
2017-04-14T17:11:49.211Z,1492189909.211 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T17:11:51.764Z,1492189911.764 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:52.560Z,1492189912.560 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:53.199Z,1492189913.199 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:11:53.199Z,1492189913.199 [BPC1] No Fault, FailCount= 1
2017-04-14T17:11:54.924Z,1492189914.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:55.328Z,1492189915.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:56.124Z,1492189916.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:56.876Z,1492189916.876 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:57.672Z,1492189917.672 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:58.468Z,1492189918.468 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:58.872Z,1492189918.872 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:11:59.668Z,1492189919.668 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:00.464Z,1492189920.464 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:00.868Z,1492189920.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:01.664Z,1492189921.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:02.460Z,1492189922.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:02.868Z,1492189922.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:03.664Z,1492189923.664 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:04.460Z,1492189924.460 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:04.956Z,1492189924.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:05.752Z,1492189925.752 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:06.548Z,1492189926.548 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:07.300Z,1492189927.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:08.096Z,1492189928.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:08.892Z,1492189928.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:09.296Z,1492189929.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:10.093Z,1492189930.093 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:10.852Z,1492189930.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:11.648Z,1492189931.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:12.444Z,1492189932.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:12.848Z,1492189932.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:13.644Z,1492189933.644 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:14.448Z,1492189934.448 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:14.852Z,1492189934.852 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:15.648Z,1492189935.648 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:16.444Z,1492189936.444 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:16.848Z,1492189936.848 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:21.276Z,1492189941.276 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:22.072Z,1492189942.072 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:22.868Z,1492189942.868 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:23.284Z,1492189943.284 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:24.080Z,1492189944.080 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:24.836Z,1492189944.836 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:25.632Z,1492189945.632 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:26.428Z,1492189946.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:26.832Z,1492189946.832 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:12:43.604Z,1492189963.605 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:12:43.605Z,1492189963.605 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T17:12:43.605Z,1492189963.605 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:12:43.631Z,1492189963.631 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:12:44.010Z,1492189964.010 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:12:44.010Z,1492189964.010 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T17:12:44.480Z,1492189964.480 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:12:44.480Z,1492189964.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:12:44.480Z,1492189964.480 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:12:52.642Z,1492189972.642 [BPC1](ERROR): Failed to receive battery data
2017-04-14T17:12:52.642Z,1492189972.642 [BPC1] Communications Fault, FailCount= 1
2017-04-14T17:12:52.642Z,1492189972.642 [BPC1](ERROR): Communications Fault
2017-04-14T17:12:52.722Z,1492189972.722 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T17:12:53.636Z,1492189973.636 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:12:53.636Z,1492189973.636 [BPC1] No Fault, FailCount= 1
2017-04-14T17:12:55.628Z,1492189975.628 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T17:13:17.976Z,1492189997.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:18.776Z,1492189998.776 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:19.180Z,1492189999.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:19.976Z,1492189999.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:20.692Z,1492190000.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:21.488Z,1492190001.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:22.286Z,1492190002.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:22.712Z,1492190002.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:23.508Z,1492190003.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:24.306Z,1492190004.306 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:24.712Z,1492190004.712 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:25.508Z,1492190005.508 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:26.305Z,1492190006.305 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:26.713Z,1492190006.713 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:31.949Z,1492190011.949 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:32.744Z,1492190012.744 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:33.148Z,1492190013.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:33.944Z,1492190013.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:34.688Z,1492190014.688 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:35.484Z,1492190015.484 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:36.287Z,1492190016.287 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:36.692Z,1492190016.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:37.488Z,1492190017.488 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:38.286Z,1492190018.286 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:38.692Z,1492190018.692 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:42.821Z,1492190022.821 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:43.616Z,1492190023.616 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:13:48.805Z,1492190028.805 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T17:13:48.805Z,1492190028.805 [Default:CheckIn:C.Wait] Stopped
2017-04-14T17:13:48.805Z,1492190028.805 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T17:13:48.805Z,1492190028.805 [Default:CheckIn:D] Running Loop=1
2017-04-14T17:13:49.226Z,1492190029.226 [Default:CheckIn:D] Stopped
2017-04-14T17:13:49.226Z,1492190029.226 [Default:CheckIn:E] Running Loop=1
2017-04-14T17:13:49.604Z,1492190029.605 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 827.731771 min 
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn:E] Stopped
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn] Stopped
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn](INFO): Running loop #121
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn] Running Loop=121
2017-04-14T17:13:49.605Z,1492190029.605 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T17:13:49.606Z,1492190029.606 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T17:13:53.331Z,1492190033.331 [NAL9602](INFO): Powering up
2017-04-14T17:14:04.341Z,1492190044.341 [NAL9602](INFO): NAL9602 initialized
2017-04-14T17:14:30.326Z,1492190070.326 [NAL9602](INFO): SBD MO Status=2, MOMSN=2212, MT Status=2, MTMSN=0
2017-04-14T17:14:30.326Z,1492190070.326 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-04-14T17:14:41.526Z,1492190081.526 [NAL9602](INFO): SBD MO Status=0, MOMSN=2212, MT Status=0, MTMSN=0
2017-04-14T17:14:41.526Z,1492190081.526 [NAL9602](INFO): No messages in MT queue
2017-04-14T17:14:44.361Z,1492190084.361 [PNI_TCM](ERROR): CRC does not match. Expected:0x43113 got:0x1857
2017-04-14T17:14:54.154Z,1492190094.154 [BPC1](ERROR): Failed to receive battery data
2017-04-14T17:14:54.154Z,1492190094.154 [BPC1] Communications Fault, FailCount= 1
2017-04-14T17:14:54.154Z,1492190094.154 [BPC1](ERROR): Communications Fault
2017-04-14T17:14:54.213Z,1492190094.213 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T17:14:55.403Z,1492190095.404 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:14:55.404Z,1492190095.404 [BPC1] No Fault, FailCount= 1
2017-04-14T17:15:38.129Z,1492190138.129 [NAL9602](INFO): GPS fix at 20170414T171654: (36.798794, -121.848941)
2017-04-14T17:15:38.207Z,1492190138.207 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T17:15:38.207Z,1492190138.207 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T17:15:43.096Z,1492190143.096 [DataOverHttps](INFO): Sending 79 bytes from file Logs/20170414T032153/Courier0488.lzma
2017-04-14T17:15:43.875Z,1492190143.875 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Courier0488.lzma.bak
2017-04-14T17:15:43.875Z,1492190143.875 [DataOverHttps](INFO): SBD MOMSN=4886526
2017-04-14T17:15:44.739Z,1492190144.739 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:15:44.739Z,1492190144.739 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2017-04-14T17:15:44.739Z,1492190144.739 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:15:44.752Z,1492190144.752 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:15:48.397Z,1492190148.397 [NAL9602](INFO): Powering down
2017-04-14T17:15:48.556Z,1492190148.556 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:15:48.556Z,1492190148.556 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2017-04-14T17:15:48.673Z,1492190148.673 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:15:48.674Z,1492190148.674 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:15:48.674Z,1492190148.674 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:15:49.397Z,1492190149.397 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:15:50.192Z,1492190150.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:15:55.928Z,1492190155.928 [DataOverHttps](INFO): Sending 138 bytes from file Logs/20170414T032153/Express0489.lzma
2017-04-14T17:15:56.727Z,1492190156.727 [DataOverHttps](INFO): Moved sent file to Logs/20170414T032153/Express0489.lzma.bak
2017-04-14T17:15:56.727Z,1492190156.727 [DataOverHttps](INFO): SBD MOMSN=4886529
2017-04-14T17:15:57.262Z,1492190157.262 [Default:CheckIn:Read_Iridium] Stopped
2017-04-14T17:15:57.262Z,1492190157.262 [Default:CheckIn:C.Wait] Running Loop=1
2017-04-14T17:15:57.262Z,1492190157.262 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-04-14T17:16:02.588Z,1492190162.588 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:16:03.384Z,1492190163.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:17:33.679Z,1492190253.679 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T17:17:33.679Z,1492190253.679 [BPC1] Data Fault, FailCount= 1
2017-04-14T17:17:33.679Z,1492190253.679 [BPC1](ERROR): Data Fault
2017-04-14T17:17:33.750Z,1492190253.750 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T17:17:34.934Z,1492190254.934 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:17:34.934Z,1492190254.934 [BPC1] No Fault, FailCount= 1
2017-04-14T17:17:40.428Z,1492190260.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:17:41.224Z,1492190261.224 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:17:43.287Z,1492190263.287 [PNI_TCM](ERROR): CRC does not match. Expected:0x57274 got:0x11293
2017-04-14T17:17:54.400Z,1492190274.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:17:55.196Z,1492190275.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:18:09.188Z,1492190289.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:18:09.984Z,1492190289.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:18:48.744Z,1492190328.744 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:18:48.744Z,1492190328.744 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2017-04-14T17:18:48.744Z,1492190328.744 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:18:48.758Z,1492190328.758 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:18:49.168Z,1492190329.168 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:18:49.169Z,1492190329.168 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2017-04-14T17:18:49.516Z,1492190329.516 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:18:49.517Z,1492190329.517 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:18:49.517Z,1492190329.517 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:19:47.032Z,1492190387.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:19:47.828Z,1492190387.828 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:20:57.892Z,1492190457.892 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-04-14T17:20:57.892Z,1492190457.892 [Default:CheckIn:C.Wait] Stopped
2017-04-14T17:20:57.892Z,1492190457.892 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-04-14T17:20:57.892Z,1492190457.892 [Default:CheckIn:D] Running Loop=1
2017-04-14T17:20:58.232Z,1492190458.232 [Default:CheckIn:D] Stopped
2017-04-14T17:20:58.232Z,1492190458.232 [Default:CheckIn:E] Running Loop=1
2017-04-14T17:21:02.590Z,1492190462.589 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 834.881901 min 
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn:E] Stopped
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn] Stopped
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn](INFO): Running loop #122
2017-04-14T17:21:02.590Z,1492190462.590 [Default:CheckIn] Running Loop=122
2017-04-14T17:21:02.590Z,1492190462.591 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-04-14T17:21:02.591Z,1492190462.591 [Default:CheckIn:Read_GPS] Running Loop=1
2017-04-14T17:21:03.036Z,1492190463.036 [NAL9602](INFO): Powering up
2017-04-14T17:21:13.836Z,1492190473.836 [NAL9602](INFO): NAL9602 initialized
2017-04-14T17:21:29.042Z,1492190489.042 [NAL9602](INFO): SBD MO Status=0, MOMSN=2213, MT Status=0, MTMSN=0
2017-04-14T17:21:29.042Z,1492190489.042 [NAL9602](INFO): No messages in MT queue
2017-04-14T17:21:45.093Z,1492190505.093 [BPC1](ERROR): Failed to parse bank A battery data
2017-04-14T17:21:45.093Z,1492190505.093 [BPC1] Data Fault, FailCount= 1
2017-04-14T17:21:45.093Z,1492190505.093 [BPC1](ERROR): Data Fault
2017-04-14T17:21:45.155Z,1492190505.155 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T17:21:45.240Z,1492190505.240 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:46.036Z,1492190506.036 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:46.315Z,1492190506.315 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:21:46.315Z,1492190506.315 [BPC1] No Fault, FailCount= 1
2017-04-14T17:21:46.440Z,1492190506.440 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:47.236Z,1492190507.236 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:48.032Z,1492190508.032 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:48.436Z,1492190508.436 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:49.234Z,1492190509.234 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:49.899Z,1492190509.899 [DeadReckonUsingDVLWaterTrack](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-04-14T17:21:49.900Z,1492190509.899 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2017-04-14T17:21:49.900Z,1492190509.899 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2017-04-14T17:21:49.917Z,1492190509.917 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2017-04-14T17:21:50.028Z,1492190510.028 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:50.333Z,1492190510.333 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2017-04-14T17:21:50.333Z,1492190510.333 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2017-04-14T17:21:50.432Z,1492190510.432 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:50.713Z,1492190510.713 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2017-04-14T17:21:50.714Z,1492190510.714 [DeadReckonUsingDVLWaterTrack](INFO): Will consider orientation measurement stale after 120s.
2017-04-14T17:21:50.714Z,1492190510.714 [DeadReckonUsingDVLWaterTrack](INFO): Will consider velocity measurement stale after 20s.
2017-04-14T17:21:51.228Z,1492190511.228 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:52.024Z,1492190512.024 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:52.428Z,1492190512.428 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:55.220Z,1492190515.220 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:56.016Z,1492190516.016 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:56.420Z,1492190516.420 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:57.218Z,1492190517.218 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:58.012Z,1492190518.012 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:58.416Z,1492190518.416 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:21:59.212Z,1492190519.212 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:00.008Z,1492190520.008 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:00.412Z,1492190520.412 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:01.208Z,1492190521.208 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:02.004Z,1492190522.004 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:02.408Z,1492190522.408 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:03.204Z,1492190523.204 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:03.000Z,1492190524.000 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:04.404Z,1492190524.404 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:05.200Z,1492190525.200 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:05.996Z,1492190525.996 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:06.400Z,1492190526.400 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:07.196Z,1492190527.196 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:07.992Z,1492190527.992 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:08.396Z,1492190528.396 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:09.192Z,1492190529.192 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:09.988Z,1492190529.988 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:10.392Z,1492190530.392 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:11.188Z,1492190531.188 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:11.984Z,1492190531.984 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:12.388Z,1492190532.388 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:13.184Z,1492190533.184 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:13.980Z,1492190533.980 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:14.384Z,1492190534.384 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:15.180Z,1492190535.180 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:15.976Z,1492190535.976 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:16.380Z,1492190536.380 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:17.176Z,1492190537.176 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:17.972Z,1492190537.972 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:18.376Z,1492190538.376 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:19.172Z,1492190539.172 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:19.968Z,1492190539.968 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:20.372Z,1492190540.372 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:21.168Z,1492190541.168 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:21.964Z,1492190541.964 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:22.368Z,1492190542.368 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:23.164Z,1492190543.164 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:23.960Z,1492190543.960 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:24.364Z,1492190544.364 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:25.160Z,1492190545.160 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:25.956Z,1492190545.956 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:26.360Z,1492190546.360 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:27.156Z,1492190547.156 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:27.952Z,1492190547.952 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:28.356Z,1492190548.356 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:29.152Z,1492190549.152 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:29.948Z,1492190549.948 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:30.352Z,1492190550.352 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:31.148Z,1492190551.148 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:31.944Z,1492190551.944 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:32.348Z,1492190552.348 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:33.129Z,1492190553.129 [BPC1](ERROR): Failed to receive battery data
2017-04-14T17:22:33.129Z,1492190553.129 [BPC1] Communications Fault, FailCount= 1
2017-04-14T17:22:33.129Z,1492190553.129 [BPC1](ERROR): Communications Fault
2017-04-14T17:22:33.144Z,1492190553.144 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:33.189Z,1492190553.188 [CBIT](ERROR): Communications Fault in component: BPC1
2017-04-14T17:22:33.940Z,1492190553.940 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:34.344Z,1492190554.344 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:34.356Z,1492190554.356 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:22:34.356Z,1492190554.356 [BPC1] No Fault, FailCount= 1
2017-04-14T17:22:35.140Z,1492190555.140 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:35.936Z,1492190555.936 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:36.340Z,1492190556.340 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:37.136Z,1492190557.136 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:37.932Z,1492190557.932 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:38.336Z,1492190558.336 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:39.132Z,1492190559.132 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:39.928Z,1492190559.928 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:40.332Z,1492190560.332 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:41.128Z,1492190561.128 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:41.924Z,1492190561.924 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:42.328Z,1492190562.328 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:43.124Z,1492190563.124 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:43.920Z,1492190563.920 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:44.324Z,1492190564.324 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:45.120Z,1492190565.120 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:45.916Z,1492190565.916 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:46.320Z,1492190566.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:47.116Z,1492190567.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:47.914Z,1492190567.914 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:48.320Z,1492190568.320 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:49.116Z,1492190569.116 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:49.912Z,1492190569.912 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:50.316Z,1492190570.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:51.112Z,1492190571.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:51.910Z,1492190571.910 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:52.316Z,1492190572.316 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:53.112Z,1492190573.112 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:53.118Z,1492190573.118 [BPC1](ERROR): Failed to parse message.
2017-04-14T17:22:53.118Z,1492190573.118 [BPC1](ERROR): Failed to parse bank B battery data
2017-04-14T17:22:53.118Z,1492190573.118 [BPC1] Data Fault, FailCount= 1
2017-04-14T17:22:53.118Z,1492190573.118 [BPC1](ERROR): Data Fault
2017-04-14T17:22:53.199Z,1492190573.199 [CBIT](ERROR): Data Fault in component: BPC1
2017-04-14T17:22:53.908Z,1492190573.908 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:54.314Z,1492190574.314 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:54.390Z,1492190574.390 [CBIT](INFO): Clearing failed state for component BPC1
2017-04-14T17:22:54.390Z,1492190574.390 [BPC1] No Fault, FailCount= 1
2017-04-14T17:22:55.108Z,1492190575.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:55.653Z,1492190575.653 [CBIT](DEBUG): EFC running - data check-sum false
2017-04-14T17:22:55.905Z,1492190575.905 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:56.312Z,1492190576.312 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:57.108Z,1492190577.108 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:57.904Z,1492190577.904 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:58.308Z,1492190578.308 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:59.104Z,1492190579.104 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:22:59.900Z,1492190579.900 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:00.304Z,1492190580.304 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:01.100Z,1492190581.100 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:01.896Z,1492190581.896 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:02.300Z,1492190582.300 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:02.592Z,1492190582.592 [NAL9602](INFO): GPS fix at 20170414T172419: (36.795257, -121.856428)
2017-04-14T17:23:02.675Z,1492190582.675 [Default:CheckIn:Read_GPS] Stopped
2017-04-14T17:23:02.675Z,1492190582.675 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-04-14T17:23:02.985Z,1492190582.985 [DataOverHttps](IMPORTANT): SBD MTMSN=20170414T172420
2017-04-14T17:23:03.096Z,1492190583.096 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:03.892Z,1492190583.892 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:04.296Z,1492190584.296 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:05.094Z,1492190585.094 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:05.888Z,1492190585.888 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:06.292Z,1492190586.292 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.
2017-04-14T17:23:07.088Z,1492190587.088 [Rowe_600LCM](DEBUG): LCB error: Software Overcurrent.